From mboxrd@z Thu Jan  1 00:00:00 1970
From: Tony Lindgren <tony@atomide.com>
Subject: [PATCH 1/4] ARM: OMAP3: Remove legacy support for am3517-evm
Date: Tue, 13 Jan 2015 09:57:42 -0800
Message-ID: <1421171865-5209-2-git-send-email-tony@atomide.com>
References: <1421171865-5209-1-git-send-email-tony@atomide.com>
Return-path: <linux-omap-owner@vger.kernel.org>
Received: from mho-03-ewr.mailhop.org ([204.13.248.66]:50944 "EHLO
	mho-01-ewr.mailhop.org" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org
	with ESMTP id S1751109AbbAMSBu (ORCPT
	<rfc822;linux-omap@vger.kernel.org>); Tue, 13 Jan 2015 13:01:50 -0500
In-Reply-To: <1421171865-5209-1-git-send-email-tony@atomide.com>
Sender: linux-omap-owner@vger.kernel.org
List-Id: linux-omap@vger.kernel.org
To: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org

This board is working with device tree based booting so there should
not be any need to keep the legacy booting support around. People
using this board can boot it with appended DTB with existing bootloader.

By removing the 3517 legacy booting support we can get a bit closer to
making all of omap3 boot in device tree only mode.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig           |   6 -
 arch/arm/mach-omap2/Makefile          |   2 -
 arch/arm/mach-omap2/board-am3517evm.c | 373 ----------------------------------
 3 files changed, 381 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/board-am3517evm.c

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 6ab656c..dcf126d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -213,12 +213,6 @@ config MACH_OVERO
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_OMAP3517EVM
-	bool "OMAP3517/ AM3517 EVM board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_CRANEBOARD
 	bool "AM3517/05 CRANE board"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 5d27dfd..b68fb66 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -253,8 +253,6 @@ obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o
 obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
 obj-$(CONFIG_MACH_TOUCHBOOK)		+= board-omap3touchbook.o
 
-obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
-
 obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
 
 obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
deleted file mode 100644
index 1c091b3..0000000
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-am3517evm.c
- *
- * Copyright (C) 2009 Texas Instruments Incorporated
- * Author: Ranjith Lohithakshan <ranjithl@ti.com>
- *
- * Based on mach-omap2/board-omap3evm.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as  published by the
- * Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
- * whether express or implied; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/can/platform/ti_hecc.h>
-#include <linux/davinci_emac.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/musb.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include "am35xx.h"
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "am35xx-emac.h"
-#include "mux.h"
-#include "control.h"
-#include "hsmmc.h"
-
-#define LCD_PANEL_PWR		176
-#define LCD_PANEL_BKLIGHT_PWR	182
-#define LCD_PANEL_PWM		181
-
-static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("s35390a", 0x30),
-	},
-};
-
-/*
- * RTC - S35390A
- */
-#define GPIO_RTCS35390A_IRQ	55
-
-static void __init am3517_evm_rtc_init(void)
-{
-	int r;
-
-	omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP);
-
-	r = gpio_request_one(GPIO_RTCS35390A_IRQ, GPIOF_IN, "rtcs35390a-irq");
-	if (r < 0) {
-		printk(KERN_WARNING "failed to request GPIO#%d\n",
-				GPIO_RTCS35390A_IRQ);
-		return;
-	}
-
-	am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
-}
-
-/*
- * I2C GPIO Expander - TCA6416
- */
-
-/* Mounted on Base-Board */
-static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-};
-static struct i2c_board_info __initdata am3517evm_i2c2_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1A),
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x21),
-		.platform_data = &am3517evm_gpio_expander_info_0,
-	},
-};
-
-/* Mounted on UI Card */
-static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_1 = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES + 16,
-};
-static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES + 32,
-};
-static struct i2c_board_info __initdata am3517evm_i2c3_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("tca6416", 0x20),
-		.platform_data = &am3517evm_ui_gpio_expander_info_1,
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x21),
-		.platform_data = &am3517evm_ui_gpio_expander_info_2,
-	},
-};
-
-static int __init am3517_evm_i2c_init(void)
-{
-	omap_register_i2c_bus(1, 400, NULL, 0);
-	omap_register_i2c_bus(2, 400, am3517evm_i2c2_boardinfo,
-			ARRAY_SIZE(am3517evm_i2c2_boardinfo));
-	omap_register_i2c_bus(3, 400, am3517evm_i2c3_boardinfo,
-			ARRAY_SIZE(am3517evm_i2c3_boardinfo));
-
-	return 0;
-}
-
-static const struct display_timing am3517_evm_lcd_videomode = {
-	.pixelclock	= { 0, 9000000, 0 },
-
-	.hactive = { 0, 480, 0 },
-	.hfront_porch = { 0, 3, 0 },
-	.hback_porch = { 0, 2, 0 },
-	.hsync_len = { 0, 42, 0 },
-
-	.vactive = { 0, 272, 0 },
-	.vfront_porch = { 0, 3, 0 },
-	.vback_porch = { 0, 2, 0 },
-	.vsync_len = { 0, 11, 0 },
-
-	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
-		DISPLAY_FLAGS_DE_LOW | DISPLAY_FLAGS_PIXDATA_POSEDGE,
-};
-
-static struct panel_dpi_platform_data am3517_evm_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 16,
-
-	.display_timing		= &am3517_evm_lcd_videomode,
-
-	.enable_gpio		= LCD_PANEL_PWR,
-	.backlight_gpio		= LCD_PANEL_BKLIGHT_PWR,
-};
-
-static struct platform_device am3517_evm_lcd_device = {
-	.name                   = "panel-dpi",
-	.id                     = 0,
-	.dev.platform_data      = &am3517_evm_lcd_pdata,
-};
-
-static struct connector_dvi_platform_data am3517_evm_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = -1,
-};
-
-static struct platform_device am3517_evm_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &am3517_evm_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data am3517_evm_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = -1,
-};
-
-static struct platform_device am3517_evm_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &am3517_evm_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data am3517_evm_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.invert_polarity = false,
-};
-
-static struct platform_device am3517_evm_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &am3517_evm_tv_pdata,
-};
-
-static struct omap_dss_board_info am3517_evm_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static void __init am3517_evm_display_init(void)
-{
-	gpio_request_one(LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd panel pwm");
-
-	omap_display_init(&am3517_evm_dss_data);
-
-	platform_device_register(&am3517_evm_tfp410_device);
-	platform_device_register(&am3517_evm_dvi_connector_device);
-	platform_device_register(&am3517_evm_lcd_device);
-	platform_device_register(&am3517_evm_tv_connector_device);
-}
-
-/*
- * Board initialization
- */
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type         = MUSB_INTERFACE_ULPI,
-	.mode                   = MUSB_OTG,
-	.power                  = 500,
-	.set_phy_power		= am35x_musb_phy_power,
-	.clear_irq		= am35x_musb_clear_irq,
-	.set_mode		= am35x_set_mode,
-	.reset			= am35x_musb_reset,
-};
-
-static __init void am3517_evm_musb_init(void)
-{
-	u32 devconf2;
-
-	/*
-	 * Set up USB clock/mode in the DEVCONF2 register.
-	 */
-	devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-	/* USB2.0 PHY reference clock is 13 MHz */
-	devconf2 &= ~(CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE);
-	devconf2 |=  CONF2_REFFREQ_13MHZ | CONF2_SESENDEN | CONF2_VBDTCTEN
-			| CONF2_DATPOL;
-
-	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-
-	usb_musb_init(&musb_board_data);
-}
-
-static __init void am3517_evm_mcbsp1_init(void)
-{
-	u32 devconf0;
-
-	/* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */
-	devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	devconf0 |=  OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK;
-	omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 1,
-		.reset_gpio = 57,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* USB OTG DRVVBUS offset = 0x212 */
-	OMAP3_MUX(SAD2D_MCAD23, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-
-static struct resource am3517_hecc_resources[] = {
-	{
-		.start	= AM35XX_IPSS_HECC_BASE,
-		.end	= AM35XX_IPSS_HECC_BASE + 0x3FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 24 + OMAP_INTC_START,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device am3517_hecc_device = {
-	.name		= "ti_hecc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(am3517_hecc_resources),
-	.resource	= am3517_hecc_resources,
-};
-
-static struct ti_hecc_platform_data am3517_evm_hecc_pdata = {
-	.scc_hecc_offset	= AM35XX_HECC_SCC_HECC_OFFSET,
-	.scc_ram_offset		= AM35XX_HECC_SCC_RAM_OFFSET,
-	.hecc_ram_offset	= AM35XX_HECC_RAM_OFFSET,
-	.mbx_offset		= AM35XX_HECC_MBOX_OFFSET,
-	.int_line		= AM35XX_HECC_INT_LINE,
-	.version		= AM35XX_HECC_VERSION,
-};
-
-static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
-{
-	am3517_hecc_device.dev.platform_data = pdata;
-	platform_device_register(&am3517_hecc_device);
-}
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= 127,
-		.gpio_wp	= 126,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= 128,
-		.gpio_wp	= 129,
-	},
-	{}      /* Terminator */
-};
-
-static void __init am3517_evm_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-
-	am3517_evm_i2c_init();
-
-	am3517_evm_display_init();
-
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-
-	/* Configure GPIO for EHCI port */
-	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
-
-	/* RTC - S35390A */
-	am3517_evm_rtc_init();
-
-	i2c_register_board_info(1, am3517evm_i2c1_boardinfo,
-				ARRAY_SIZE(am3517evm_i2c1_boardinfo));
-	/*Ethernet*/
-	am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
-
-	/* MUSB */
-	am3517_evm_musb_init();
-
-	/* McBSP1 */
-	am3517_evm_mcbsp1_init();
-
-	/* MMC init function */
-	omap_hsmmc_init(mmc);
-}
-
-MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= am35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= am3517_evm_init,
-	.init_late	= am35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-- 
2.1.4


From mboxrd@z Thu Jan  1 00:00:00 1970
From: tony@atomide.com (Tony Lindgren)
Date: Tue, 13 Jan 2015 09:57:42 -0800
Subject: [PATCH 1/4] ARM: OMAP3: Remove legacy support for am3517-evm
In-Reply-To: <1421171865-5209-1-git-send-email-tony@atomide.com>
References: <1421171865-5209-1-git-send-email-tony@atomide.com>
Message-ID: <1421171865-5209-2-git-send-email-tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

This board is working with device tree based booting so there should
not be any need to keep the legacy booting support around. People
using this board can boot it with appended DTB with existing bootloader.

By removing the 3517 legacy booting support we can get a bit closer to
making all of omap3 boot in device tree only mode.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig           |   6 -
 arch/arm/mach-omap2/Makefile          |   2 -
 arch/arm/mach-omap2/board-am3517evm.c | 373 ----------------------------------
 3 files changed, 381 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/board-am3517evm.c

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 6ab656c..dcf126d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -213,12 +213,6 @@ config MACH_OVERO
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_OMAP3517EVM
-	bool "OMAP3517/ AM3517 EVM board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_CRANEBOARD
 	bool "AM3517/05 CRANE board"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 5d27dfd..b68fb66 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -253,8 +253,6 @@ obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o
 obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
 obj-$(CONFIG_MACH_TOUCHBOOK)		+= board-omap3touchbook.o
 
-obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
-
 obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
 
 obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
deleted file mode 100644
index 1c091b3..0000000
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-am3517evm.c
- *
- * Copyright (C) 2009 Texas Instruments Incorporated
- * Author: Ranjith Lohithakshan <ranjithl@ti.com>
- *
- * Based on mach-omap2/board-omap3evm.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as  published by the
- * Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
- * whether express or implied; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/can/platform/ti_hecc.h>
-#include <linux/davinci_emac.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/musb.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include "am35xx.h"
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "am35xx-emac.h"
-#include "mux.h"
-#include "control.h"
-#include "hsmmc.h"
-
-#define LCD_PANEL_PWR		176
-#define LCD_PANEL_BKLIGHT_PWR	182
-#define LCD_PANEL_PWM		181
-
-static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("s35390a", 0x30),
-	},
-};
-
-/*
- * RTC - S35390A
- */
-#define GPIO_RTCS35390A_IRQ	55
-
-static void __init am3517_evm_rtc_init(void)
-{
-	int r;
-
-	omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP);
-
-	r = gpio_request_one(GPIO_RTCS35390A_IRQ, GPIOF_IN, "rtcs35390a-irq");
-	if (r < 0) {
-		printk(KERN_WARNING "failed to request GPIO#%d\n",
-				GPIO_RTCS35390A_IRQ);
-		return;
-	}
-
-	am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
-}
-
-/*
- * I2C GPIO Expander - TCA6416
- */
-
-/* Mounted on Base-Board */
-static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-};
-static struct i2c_board_info __initdata am3517evm_i2c2_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1A),
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x21),
-		.platform_data = &am3517evm_gpio_expander_info_0,
-	},
-};
-
-/* Mounted on UI Card */
-static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_1 = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES + 16,
-};
-static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES + 32,
-};
-static struct i2c_board_info __initdata am3517evm_i2c3_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("tca6416", 0x20),
-		.platform_data = &am3517evm_ui_gpio_expander_info_1,
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x21),
-		.platform_data = &am3517evm_ui_gpio_expander_info_2,
-	},
-};
-
-static int __init am3517_evm_i2c_init(void)
-{
-	omap_register_i2c_bus(1, 400, NULL, 0);
-	omap_register_i2c_bus(2, 400, am3517evm_i2c2_boardinfo,
-			ARRAY_SIZE(am3517evm_i2c2_boardinfo));
-	omap_register_i2c_bus(3, 400, am3517evm_i2c3_boardinfo,
-			ARRAY_SIZE(am3517evm_i2c3_boardinfo));
-
-	return 0;
-}
-
-static const struct display_timing am3517_evm_lcd_videomode = {
-	.pixelclock	= { 0, 9000000, 0 },
-
-	.hactive = { 0, 480, 0 },
-	.hfront_porch = { 0, 3, 0 },
-	.hback_porch = { 0, 2, 0 },
-	.hsync_len = { 0, 42, 0 },
-
-	.vactive = { 0, 272, 0 },
-	.vfront_porch = { 0, 3, 0 },
-	.vback_porch = { 0, 2, 0 },
-	.vsync_len = { 0, 11, 0 },
-
-	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
-		DISPLAY_FLAGS_DE_LOW | DISPLAY_FLAGS_PIXDATA_POSEDGE,
-};
-
-static struct panel_dpi_platform_data am3517_evm_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 16,
-
-	.display_timing		= &am3517_evm_lcd_videomode,
-
-	.enable_gpio		= LCD_PANEL_PWR,
-	.backlight_gpio		= LCD_PANEL_BKLIGHT_PWR,
-};
-
-static struct platform_device am3517_evm_lcd_device = {
-	.name                   = "panel-dpi",
-	.id                     = 0,
-	.dev.platform_data      = &am3517_evm_lcd_pdata,
-};
-
-static struct connector_dvi_platform_data am3517_evm_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = -1,
-};
-
-static struct platform_device am3517_evm_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &am3517_evm_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data am3517_evm_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = -1,
-};
-
-static struct platform_device am3517_evm_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &am3517_evm_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data am3517_evm_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.invert_polarity = false,
-};
-
-static struct platform_device am3517_evm_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &am3517_evm_tv_pdata,
-};
-
-static struct omap_dss_board_info am3517_evm_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static void __init am3517_evm_display_init(void)
-{
-	gpio_request_one(LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd panel pwm");
-
-	omap_display_init(&am3517_evm_dss_data);
-
-	platform_device_register(&am3517_evm_tfp410_device);
-	platform_device_register(&am3517_evm_dvi_connector_device);
-	platform_device_register(&am3517_evm_lcd_device);
-	platform_device_register(&am3517_evm_tv_connector_device);
-}
-
-/*
- * Board initialization
- */
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type         = MUSB_INTERFACE_ULPI,
-	.mode                   = MUSB_OTG,
-	.power                  = 500,
-	.set_phy_power		= am35x_musb_phy_power,
-	.clear_irq		= am35x_musb_clear_irq,
-	.set_mode		= am35x_set_mode,
-	.reset			= am35x_musb_reset,
-};
-
-static __init void am3517_evm_musb_init(void)
-{
-	u32 devconf2;
-
-	/*
-	 * Set up USB clock/mode in the DEVCONF2 register.
-	 */
-	devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-	/* USB2.0 PHY reference clock is 13 MHz */
-	devconf2 &= ~(CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE);
-	devconf2 |=  CONF2_REFFREQ_13MHZ | CONF2_SESENDEN | CONF2_VBDTCTEN
-			| CONF2_DATPOL;
-
-	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-
-	usb_musb_init(&musb_board_data);
-}
-
-static __init void am3517_evm_mcbsp1_init(void)
-{
-	u32 devconf0;
-
-	/* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */
-	devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	devconf0 |=  OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK;
-	omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 1,
-		.reset_gpio = 57,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* USB OTG DRVVBUS offset = 0x212 */
-	OMAP3_MUX(SAD2D_MCAD23, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-
-static struct resource am3517_hecc_resources[] = {
-	{
-		.start	= AM35XX_IPSS_HECC_BASE,
-		.end	= AM35XX_IPSS_HECC_BASE + 0x3FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 24 + OMAP_INTC_START,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device am3517_hecc_device = {
-	.name		= "ti_hecc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(am3517_hecc_resources),
-	.resource	= am3517_hecc_resources,
-};
-
-static struct ti_hecc_platform_data am3517_evm_hecc_pdata = {
-	.scc_hecc_offset	= AM35XX_HECC_SCC_HECC_OFFSET,
-	.scc_ram_offset		= AM35XX_HECC_SCC_RAM_OFFSET,
-	.hecc_ram_offset	= AM35XX_HECC_RAM_OFFSET,
-	.mbx_offset		= AM35XX_HECC_MBOX_OFFSET,
-	.int_line		= AM35XX_HECC_INT_LINE,
-	.version		= AM35XX_HECC_VERSION,
-};
-
-static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
-{
-	am3517_hecc_device.dev.platform_data = pdata;
-	platform_device_register(&am3517_hecc_device);
-}
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= 127,
-		.gpio_wp	= 126,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= 128,
-		.gpio_wp	= 129,
-	},
-	{}      /* Terminator */
-};
-
-static void __init am3517_evm_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-
-	am3517_evm_i2c_init();
-
-	am3517_evm_display_init();
-
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-
-	/* Configure GPIO for EHCI port */
-	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
-
-	/* RTC - S35390A */
-	am3517_evm_rtc_init();
-
-	i2c_register_board_info(1, am3517evm_i2c1_boardinfo,
-				ARRAY_SIZE(am3517evm_i2c1_boardinfo));
-	/*Ethernet*/
-	am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
-
-	/* MUSB */
-	am3517_evm_musb_init();
-
-	/* McBSP1 */
-	am3517_evm_mcbsp1_init();
-
-	/* MMC init function */
-	omap_hsmmc_init(mmc);
-}
-
-MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= am35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= am3517_evm_init,
-	.init_late	= am35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-- 
2.1.4