On Thu, 2015-01-22 at 13:39 +0200, Erez Shitrit wrote: > On 1/13/2015 8:07 PM, Doug Ledford wrote: > > On Wed, 2015-01-07 at 17:04 +0200, Or Gerlitz wrote: > >> From: Erez Shitrit > >> > >> Following commit 016d9fb25cd9 "IPoIB: fix MCAST_FLAG_BUSY usage" > >> both IPv6 traffic and for the most cases all IPv4 multicast traffic > >> aren't working. > >> > >> After this change there is no mechanism to handle the work that does the > >> join process for the rest of the mcg's. For example, if in the list of > >> all the mcg's there is a send-only request, after its processing, the > >> code in ipoib_mcast_sendonly_join_complete() will not requeue the > >> mcast task, but leaves the bit that signals this task is running, > >> and hence the task will never run. > >> > >> Also, whenever the kernel sends multicast packet (w.o joining to this > >> group), we don't call ipoib_send_only_join(), the code tries to start > >> the mcast task but it failed because the bit IPOIB_MCAST_RUN is always > >> set, As a result the multicast packet will never be sent. > >> > >> The fix handles all the join requests via the same logic, and call > >> explicitly to sendonly join whenever there is a packet from sendonly type. > >> > >> Since ipoib_mcast_sendonly_join() is now called from the driver TX flow, > >> we can't take mutex there. Locking isn't required there since the multicast > >> join callback will be called only after the SA agent initialized the relevant > >> multicast object. > >> > >> Fixes: 016d9fb25cd9 ('IPoIB: fix MCAST_FLAG_BUSY usage') > >> Reported-by: Eyal Perry > >> Signed-off-by: Erez Shitrit > >> Signed-off-by: Or Gerlitz > >> --- > >> V0 --> V1 changes: Added credits (...) and furnished the change-log abit. > >> > >> drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 15 ++++++--------- > >> 1 files changed, 6 insertions(+), 9 deletions(-) > >> > >> diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c > >> index bc50dd0..0ea4b08 100644 > >> --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c > >> +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c > >> @@ -301,9 +301,10 @@ ipoib_mcast_sendonly_join_complete(int status, > >> dev_kfree_skb_any(skb_dequeue(&mcast->pkt_queue)); > >> } > >> netif_tx_unlock_bh(dev); > >> + > >> + clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags); > >> } > >> out: > >> - clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags); > >> if (status) > >> mcast->mc = NULL; > >> complete(&mcast->done); > > This chunk is wrong. We are in our complete routine, which means > > ib_sa_join_multicast is calling us for this mcast group, and we will > > never see another return for this group. We must clear the BUSY flag no > > matter what as the BUSY flag now indicates that our mcast join is still > > outstanding in the lower layer ib_sa_ area, not that we have joined the > > group. Please re-read my patches that re-worked the BUSY flag usage. > > The BUSY flag was poorly named/used in the past, which is why a previous > > patch introduced the JOINING or whatever flag it was called. My > > patchset reworks the flag usage to be more sane. BUSY now means > > *exactly* that: this mcast group is in the process of joining, aka it's > > BUSY. It doesn't mean we've joined the group and there are no more > > outstanding join requests. That's signified by mcast->mc != > > IS_ERR_OR_NULL. > agree, may mistake, the clear_bit(IPOIB_MCAST_FLAG_BUSY) should be in > any case, i will move it 3 lines later, > BTW, this will solve the "in-flight" messages you saw. > > > >> @@ -342,7 +343,6 @@ static int ipoib_mcast_sendonly_join(struct ipoib_mcast *mcast) > >> rec.port_gid = priv->local_gid; > >> rec.pkey = cpu_to_be16(priv->pkey); > >> > >> - mutex_lock(&mcast_mutex); > >> init_completion(&mcast->done); > >> set_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags); > >> mcast->mc = ib_sa_join_multicast(&ipoib_sa_client, priv->ca, > >> @@ -364,7 +364,6 @@ static int ipoib_mcast_sendonly_join(struct ipoib_mcast *mcast) > >> ipoib_dbg_mcast(priv, "no multicast record for %pI6, starting " > >> "sendonly join\n", mcast->mcmember.mgid.raw); > >> } > >> - mutex_unlock(&mcast_mutex); > >> > >> return ret; > >> } > > No! You can not, under any circumstances, remove this locking! One of > > the things that frustrated me for a bit until I tracked it down was how > > ib_sa_join_multicast returns errors to the ipoib layer. When you call > > ib_sa_join_multicast, the return value is either a valid mcast->mc > > pointer or IS_ERR(err). If it's a valid pointer, that does not mean we > > have successfully joined, it means that we might join, but it isn't > > until we have completed the callback that we know. The callback will > > clear out mcast->mc if we encounter an error during the callback and > > know that by returning an error from the callback, the lower layer is > > going to delete the mcast->mc context out from underneath us. As it > > turns out, we often get our callbacks called even before we get the > > initial return from ib_sa_join_multicast. If we don't have this > > locking, and we get any error in the callback, the callback will clear > > mcast->mc to indicate that we have no valid group, then we will return > > from ib_sa_join_multicast and set mcast->mc to an invalid group. To > > prevent that, the callback grabs this mutex at the beginning of its > > operation. We *must* grab the mutex here and hold it until we are done > > with mcast->mc or else we can't know for sure if the mcast->mc that we > > just set as the return code from ib_sa_join_multicast is the right > > return value or if we just overwrote the callbacks setting of that > > field. > OK, i got your point now, you want to sync between the > ipoib_mcas_sendonly_join to the sa callback > (ipoib_mcast_sendonly_join_complete), > but for that you don't need to use mutex (if you are using mutes you are > not able to call ipoib_mcast_sendonly_join from the TX flow). > the easy way is to add simple check in the function > ipoib_mcast_sendonly_join instead of the IS_ERR(mcast->mc) use > IS_ERR_OR_NULL(mcast->mc). IMHO, that solves the sync issue. No, it doesn't. We must use something like the mutex or else it is possible for the join completion to run *prior* to the return of ib_sa_multicast_join. We put the return value of ib_sa_join_multicast into mcast->mc. If the join completion runs prior to our return, we overwrite whatever the join completion had put into mcast->mc with our return from the ib_sa_multicast_join routine, possibly overwriting a valid value. It took me quite some time to track that race down, please don't reintroduce it. > >> @@ -622,10 +621,8 @@ void ipoib_mcast_join_task(struct work_struct *work) > >> break; > >> } > >> > >> - if (test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags)) > >> - ipoib_mcast_sendonly_join(mcast); > >> - else > >> - ipoib_mcast_join(dev, mcast, 1); > >> + ipoib_mcast_join(dev, mcast, 1); > >> + > >> return; > >> } > >> > >> @@ -725,8 +722,6 @@ void ipoib_mcast_send(struct net_device *dev, u8 *daddr, struct sk_buff *skb) > >> memcpy(mcast->mcmember.mgid.raw, mgid, sizeof (union ib_gid)); > >> __ipoib_mcast_add(dev, mcast); > >> list_add_tail(&mcast->list, &priv->multicast_list); > >> - if (!test_and_set_bit(IPOIB_MCAST_RUN, &priv->flags)) > >> - queue_delayed_work(priv->wq, &priv->mcast_task, 0); > >> } > >> > >> if (!mcast->ah) { > >> @@ -740,6 +735,8 @@ void ipoib_mcast_send(struct net_device *dev, u8 *daddr, struct sk_buff *skb) > >> if (test_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags)) > >> ipoib_dbg_mcast(priv, "no address vector, " > >> "but multicast join already started\n"); > >> + else if (test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags)) > >> + ipoib_mcast_sendonly_join(mcast); > >> > >> /* > >> * If lookup completes between here and out:, don't > > None of this looks right to me either. But that's OK, I think I found > > the bug while looking all of this over. I'm going to do some testing > > and I'll report back here when done. You can't even do this without > > removing the mutex_lock above that I pointed out has to stay, so this > > really isn't right. > I think, that after i will add the changes i mentioned, it will be fine. > will send you the new patch, please take a look. I still disagree with the patch. In order to work around the sendonly join and sendonly join completion routines not restarting the task thread properly, you have moved them over to being called directly. This gives two different modes of operation for regular joins versus send only joins. That just makes the code more confusing and less understandable. That, to me, is not a good fix. If it was a bandaid that limped us home without making the code more obfuscated, that's one thing. This does not do that in my opinion. -- Doug Ledford GPG KeyID: 0E572FDD