From: Wenyou Yang <wenyou.yang@atmel.com> To: <nicolas.ferre@atmel.com>, <linux@arm.linux.org.uk> Cc: <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <alexandre.belloni@free-electrons.com>, <sylvain.rochet@finsecur.com>, <peda@axentia.se>, <wenyou.yang@atmel.com> Subject: [PATCH 0/7] AT91 pm improvements for 3.20 Date: Mon, 26 Jan 2015 18:03:37 +0800 [thread overview] Message-ID: <1422266617-24381-1-git-send-email-wenyou.yang@atmel.com> (raw) Hi Nicolas, This patch set is add pm support for ARMv7 SoCs. - Add WFI support for ARMv7. - Disable the L1 D-cache and L2 cache before suspending. - Get the memory type from the dts file config. - Disable the mpddr controller's clock and DDR clock during the suspending. It is based on the following patch set, [PATCH v2 00/12] AT91 pm cleanup for 3.20 Patrice Vilchez (1): pm: at91: pm_suspend: MOR register KEY was missing Wenyou Yang (6): pm: at91: achieve the memory controller's type from the dts file. pm: at91: pm_suspend: add the WFI support for ARMv7 ARM: at91: enable the L2 Cache controller pm: at91: add disable/enable the L1/L2 cache while suspend/resume pm: at91: add achieve the mpddrc peripheral ID and the DDR clock ID support pm: at91: add disable/enable the mpddrc's clock and DDR clock support arch/arm/mach-at91/board-dt-sama5.c | 53 ++++++++ arch/arm/mach-at91/generic.h | 7 ++ arch/arm/mach-at91/pm.c | 22 ++-- arch/arm/mach-at91/pm.h | 8 ++ arch/arm/mach-at91/pm_suspend.S | 227 ++++++++++++++++++++++++++++++++++- arch/arm/mach-at91/setup.c | 52 +++++++- 6 files changed, 356 insertions(+), 13 deletions(-) -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: wenyou.yang@atmel.com (Wenyou Yang) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 0/7] AT91 pm improvements for 3.20 Date: Mon, 26 Jan 2015 18:03:37 +0800 [thread overview] Message-ID: <1422266617-24381-1-git-send-email-wenyou.yang@atmel.com> (raw) Hi Nicolas, This patch set is add pm support for ARMv7 SoCs. - Add WFI support for ARMv7. - Disable the L1 D-cache and L2 cache before suspending. - Get the memory type from the dts file config. - Disable the mpddr controller's clock and DDR clock during the suspending. It is based on the following patch set, [PATCH v2 00/12] AT91 pm cleanup for 3.20 Patrice Vilchez (1): pm: at91: pm_suspend: MOR register KEY was missing Wenyou Yang (6): pm: at91: achieve the memory controller's type from the dts file. pm: at91: pm_suspend: add the WFI support for ARMv7 ARM: at91: enable the L2 Cache controller pm: at91: add disable/enable the L1/L2 cache while suspend/resume pm: at91: add achieve the mpddrc peripheral ID and the DDR clock ID support pm: at91: add disable/enable the mpddrc's clock and DDR clock support arch/arm/mach-at91/board-dt-sama5.c | 53 ++++++++ arch/arm/mach-at91/generic.h | 7 ++ arch/arm/mach-at91/pm.c | 22 ++-- arch/arm/mach-at91/pm.h | 8 ++ arch/arm/mach-at91/pm_suspend.S | 227 ++++++++++++++++++++++++++++++++++- arch/arm/mach-at91/setup.c | 52 +++++++- 6 files changed, 356 insertions(+), 13 deletions(-) -- 1.7.9.5
next reply other threads:[~2015-01-26 10:04 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-01-26 10:03 Wenyou Yang [this message] 2015-01-26 10:03 ` [PATCH 0/7] AT91 pm improvements for 3.20 Wenyou Yang 2015-01-26 10:04 ` [PATCH 1/7] pm: at91: achieve the memory controller's type from the dts file Wenyou Yang 2015-01-26 10:04 ` Wenyou Yang 2015-01-26 10:06 ` [PATCH 2/7] pm: at91: pm_suspend: add the WFI support for ARMv7 Wenyou Yang 2015-01-26 10:06 ` Wenyou Yang 2015-01-26 13:05 ` Sergei Shtylyov 2015-01-26 13:05 ` Sergei Shtylyov 2015-01-27 4:44 ` Yang, Wenyou 2015-01-27 4:44 ` Yang, Wenyou 2015-01-28 11:25 ` Lorenzo Pieralisi 2015-01-28 11:25 ` Lorenzo Pieralisi 2015-01-29 2:36 ` Yang, Wenyou 2015-01-29 2:36 ` Yang, Wenyou 2015-01-29 12:22 ` Lorenzo Pieralisi 2015-01-29 12:22 ` Lorenzo Pieralisi 2015-01-30 7:23 ` Yang, Wenyou 2015-01-30 7:23 ` Yang, Wenyou 2015-01-30 10:17 ` Lorenzo Pieralisi 2015-01-30 10:17 ` Lorenzo Pieralisi 2015-01-30 10:44 ` Lorenzo Pieralisi 2015-01-30 10:44 ` Lorenzo Pieralisi 2015-01-26 10:06 ` [PATCH 3/7] pm: at91: pm_suspend: MOR register KEY was missing Wenyou Yang 2015-01-26 10:06 ` Wenyou Yang 2015-01-26 10:07 ` [PATCH 4/7] ARM: at91: enable the L2 Cache controller Wenyou Yang 2015-01-26 10:07 ` Wenyou Yang 2015-01-26 11:46 ` Mark Rutland 2015-01-26 11:46 ` Mark Rutland 2015-01-26 12:45 ` Russell King - ARM Linux 2015-01-26 12:45 ` Russell King - ARM Linux 2015-01-26 22:36 ` Alexandre Belloni 2015-01-26 22:36 ` Alexandre Belloni 2015-01-27 5:11 ` Yang, Wenyou 2015-01-27 5:11 ` Yang, Wenyou 2015-01-26 10:07 ` [PATCH 5/7] pm: at91: add disable/enable the L1/L2 cache while suspend/resume Wenyou Yang 2015-01-26 10:07 ` Wenyou Yang 2015-01-26 10:08 ` [PATCH 6/7] pm: at91: add achieve the mpddrc peripheral ID and the DDR clock ID support Wenyou Yang 2015-01-26 10:08 ` Wenyou Yang 2015-01-26 11:49 ` Mark Rutland 2015-01-26 11:49 ` Mark Rutland 2015-01-27 5:24 ` Yang, Wenyou 2015-01-27 5:24 ` Yang, Wenyou 2015-01-26 10:08 ` [PATCH 7/7] pm: at91: add disable/enable the mpddrc's clock and DDR clock support Wenyou Yang 2015-01-26 10:08 ` Wenyou Yang
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1422266617-24381-1-git-send-email-wenyou.yang@atmel.com \ --to=wenyou.yang@atmel.com \ --cc=alexandre.belloni@free-electrons.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ --cc=nicolas.ferre@atmel.com \ --cc=peda@axentia.se \ --cc=sylvain.rochet@finsecur.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.