From mboxrd@z Thu Jan 1 00:00:00 1970 From: Laurent Pinchart Date: Tue, 27 Jan 2015 08:45:56 +0000 Subject: [PATCH 2/2] ARM: shmobile: r8a7794: alt: Enable ethernet controller Message-Id: <1422348356-18675-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org Enable the ethernet controller for the Alt board. Pin muxing entries are currently left out as r8a7794 pin control support isn't available yet. We thus rely on the boot loader to configure ethernet pins for now. Signed-off-by: Laurent Pinchart --- arch/arm/boot/dts/r8a7794-alt.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 0d848e605071..25bf434433b1 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -43,6 +43,19 @@ status = "okay"; }; +ðer { + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; + &scif2 { status = "okay"; }; -- 2.0.5