From mboxrd@z Thu Jan 1 00:00:00 1970 From: Adrian Hunter Subject: [PATCH V2 11/15] mmc: sdhci: Change to new way of doing re-tuning Date: Thu, 29 Jan 2015 11:00:26 +0200 Message-ID: <1422522030-17793-12-git-send-email-adrian.hunter@intel.com> References: <1422522030-17793-1-git-send-email-adrian.hunter@intel.com> Return-path: Received: from mga14.intel.com ([192.55.52.115]:48914 "EHLO mga14.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758562AbbA2JCy (ORCPT ); Thu, 29 Jan 2015 04:02:54 -0500 In-Reply-To: <1422522030-17793-1-git-send-email-adrian.hunter@intel.com> Sender: linux-mmc-owner@vger.kernel.org List-Id: linux-mmc@vger.kernel.org To: Ulf Hansson , Chris Ball Cc: linux-mmc , Aaron Lu , Philip Rakity , Girish K S , Al Cooper , Arend van Spriel Make use of mmc core support for re-tuning instead of doing it all in the sdhci driver. This patch also changes to flag the need for re-tuning always after runtime suspend when tuning has been used at initialization. Previously it was only done if the re-tuning timer was in use. Signed-off-by: Adrian Hunter --- drivers/mmc/host/sdhci.c | 113 ++++++---------------------------------------- include/linux/mmc/sdhci.h | 3 -- 2 files changed, 14 insertions(+), 102 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index c9881ca..dd0be76 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -51,7 +51,6 @@ static void sdhci_finish_data(struct sdhci_host *); static void sdhci_finish_command(struct sdhci_host *); static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode); -static void sdhci_tuning_timer(unsigned long data); static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable); static int sdhci_pre_dma_transfer(struct sdhci_host *host, struct mmc_data *data, @@ -252,17 +251,6 @@ static void sdhci_init(struct sdhci_host *host, int soft) static void sdhci_reinit(struct sdhci_host *host) { sdhci_init(host, 0); - /* - * Retuning stuffs are affected by different cards inserted and only - * applicable to UHS-I cards. So reset these fields to their initial - * value when card is removed. - */ - if (host->flags & SDHCI_USING_RETUNING_TIMER) { - host->flags &= ~SDHCI_USING_RETUNING_TIMER; - - del_timer_sync(&host->tuning_timer); - host->flags &= ~SDHCI_NEEDS_RETUNING; - } sdhci_enable_card_detection(host); } @@ -1350,7 +1338,6 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) struct sdhci_host *host; int present; unsigned long flags; - u32 tuning_opcode; host = mmc_priv(mmc); @@ -1399,39 +1386,6 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) host->mrq->cmd->error = -ENOMEDIUM; tasklet_schedule(&host->finish_tasklet); } else { - u32 present_state; - - present_state = sdhci_readl(host, SDHCI_PRESENT_STATE); - /* - * Check if the re-tuning timer has already expired and there - * is no on-going data transfer and DAT0 is not busy. If so, - * we need to execute tuning procedure before sending command. - */ - if ((host->flags & SDHCI_NEEDS_RETUNING) && - !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ)) && - (present_state & SDHCI_DATA_0_LVL_MASK)) { - if (mmc->card) { - /* eMMC uses cmd21 but sd and sdio use cmd19 */ - tuning_opcode = - mmc->card->type == MMC_TYPE_MMC ? - MMC_SEND_TUNING_BLOCK_HS200 : - MMC_SEND_TUNING_BLOCK; - - /* Here we need to set the host->mrq to NULL, - * in case the pending finish_tasklet - * finishes it incorrectly. - */ - host->mrq = NULL; - - spin_unlock_irqrestore(&host->lock, flags); - sdhci_execute_tuning(mmc, tuning_opcode); - spin_lock_irqsave(&host->lock, flags); - - /* Restore original mmc_request structure */ - host->mrq = mrq; - } - } - if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) sdhci_send_command(host, mrq->sbc); else @@ -2077,23 +2031,19 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) } out: - host->flags &= ~SDHCI_NEEDS_RETUNING; - if (tuning_count) { - host->flags |= SDHCI_USING_RETUNING_TIMER; - mod_timer(&host->tuning_timer, jiffies + tuning_count * HZ); + /* + * In case tuning fails, host controllers which support + * re-tuning can try tuning again at a later time, when the + * re-tuning timer expires. So for these controllers, we + * return 0. Since there might be other controllers who do not + * have this capability, we return error for them. + */ + err = 0; } - /* - * In case tuning fails, host controllers which support re-tuning can - * try tuning again at a later time, when the re-tuning timer expires. - * So for these controllers, we return 0. Since there might be other - * controllers who do not have this capability, we return error for - * them. SDHCI_USING_RETUNING_TIMER means the host is currently using - * a retuning timer to do the retuning for the card. - */ - if (err && (host->flags & SDHCI_USING_RETUNING_TIMER)) - err = 0; + if (!err) + mmc_retune_enable(host->mmc, tuning_count); sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); @@ -2349,20 +2299,6 @@ static void sdhci_timeout_timer(unsigned long data) spin_unlock_irqrestore(&host->lock, flags); } -static void sdhci_tuning_timer(unsigned long data) -{ - struct sdhci_host *host; - unsigned long flags; - - host = (struct sdhci_host *)data; - - spin_lock_irqsave(&host->lock, flags); - - host->flags |= SDHCI_NEEDS_RETUNING; - - spin_unlock_irqrestore(&host->lock, flags); -} - /*****************************************************************************\ * * * Interrupt handling * @@ -2740,11 +2676,8 @@ int sdhci_suspend_host(struct sdhci_host *host) { sdhci_disable_card_detection(host); - /* Disable tuning since we are suspending */ - if (host->flags & SDHCI_USING_RETUNING_TIMER) { - del_timer_sync(&host->tuning_timer); - host->flags &= ~SDHCI_NEEDS_RETUNING; - } + mmc_retune_timer_stop(host->mmc); + mmc_retune_needed(host->mmc); if (!device_may_wakeup(mmc_dev(host->mmc))) { host->ier = 0; @@ -2794,10 +2727,6 @@ int sdhci_resume_host(struct sdhci_host *host) sdhci_enable_card_detection(host); - /* Set the re-tuning expiration flag */ - if (host->flags & SDHCI_USING_RETUNING_TIMER) - host->flags |= SDHCI_NEEDS_RETUNING; - return ret; } @@ -2834,11 +2763,8 @@ int sdhci_runtime_suspend_host(struct sdhci_host *host) { unsigned long flags; - /* Disable tuning since we are suspending */ - if (host->flags & SDHCI_USING_RETUNING_TIMER) { - del_timer_sync(&host->tuning_timer); - host->flags &= ~SDHCI_NEEDS_RETUNING; - } + mmc_retune_timer_stop(host->mmc); + mmc_retune_needed(host->mmc); spin_lock_irqsave(&host->lock, flags); host->ier &= SDHCI_INT_CARD_INT; @@ -2881,10 +2807,6 @@ int sdhci_runtime_resume_host(struct sdhci_host *host) spin_unlock_irqrestore(&host->lock, flags); } - /* Set the re-tuning expiration flag */ - if (host->flags & SDHCI_USING_RETUNING_TIMER) - host->flags |= SDHCI_NEEDS_RETUNING; - spin_lock_irqsave(&host->lock, flags); host->runtime_suspended = false; @@ -3419,13 +3341,6 @@ int sdhci_add_host(struct sdhci_host *host) init_waitqueue_head(&host->buf_ready_int); - if (host->version >= SDHCI_SPEC_300) { - /* Initialize re-tuning timer */ - init_timer(&host->tuning_timer); - host->tuning_timer.data = (unsigned long)host; - host->tuning_timer.function = sdhci_tuning_timer; - } - sdhci_init(host, 0); ret = request_threaded_irq(host->irq, sdhci_irq, sdhci_thread_irq, diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index c3e3db1..c5b00be 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -138,13 +138,11 @@ struct sdhci_host { #define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ #define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ #define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */ -#define SDHCI_NEEDS_RETUNING (1<<5) /* Host needs retuning */ #define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ #define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ #define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ #define SDHCI_SDR104_NEEDS_TUNING (1<<10) /* SDR104/HS200 needs tuning */ -#define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */ #define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */ #define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */ @@ -210,7 +208,6 @@ struct sdhci_host { unsigned int tuning_count; /* Timer count for re-tuning */ unsigned int tuning_mode; /* Re-tuning mode supported by host */ #define SDHCI_TUNING_MODE_1 0 - struct timer_list tuning_timer; /* Timer for tuning */ struct sdhci_host_next next_data; unsigned long private[0] ____cacheline_aligned; -- 1.9.1