All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hannes Petermaier <oe5hpm@oevsv.at>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 09/21] board/BuR/tseries: Change pinmux for GPIO2_28 from GPIO to PWM-Timeroutput
Date: Fri, 30 Jan 2015 14:25:12 +0100	[thread overview]
Message-ID: <1422624324-15431-9-git-send-email-oe5hpm@oevsv.at> (raw)
In-Reply-To: <1422624324-15431-1-git-send-email-oe5hpm@oevsv.at>

From now we use this pin for the Brightness regulation from LED-Backlight.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
---
 board/BuR/tseries/mux.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/board/BuR/tseries/mux.c b/board/BuR/tseries/mux.c
index 0ba25ee..36ee04c 100644
--- a/board/BuR/tseries/mux.c
+++ b/board/BuR/tseries/mux.c
@@ -131,9 +131,9 @@ static struct module_pin_mux gpIOs[] = {
 	{OFFSET(spi0_cs1),  (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
 	/* TIMER5   (MMC0_DAT3) - TIMER5 (Buzzer) */
 	{OFFSET(mmc0_dat3), (MODE(3) | PULLUDEN | RXACTIVE)},
-	/* TIMER6   (MMC0_DAT2) - PWM_BACK_3V3, later used as MODE3 for PWM */
-	{OFFSET(mmc0_dat2), (MODE(7) | PULLUDEN | RXACTIVE)},
-	/* GPIO2_27 (MMC0_DAT1)	 - MII_nNAND */
+	/* TIMER6   (MMC0_DAT2) - PWM_BACK_3V3 */
+	{OFFSET(mmc0_dat2), (MODE(3) | PULLUDEN | RXACTIVE)},
+	/* GPIO2_28 (MMC0_DAT1)	 - MII_nNAND */
 	{OFFSET(mmc0_dat1), (MODE(7) | PULLUDEN | RXACTIVE)},
 	/* GPIO2_29 (MMC0_DAT0)	 - NAND_1n0 */
 	{OFFSET(mmc0_dat0), (MODE(7) | PULLUDEN | RXACTIVE)},
-- 
1.7.9.5

  parent reply	other threads:[~2015-01-30 13:25 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-30 13:25 [U-Boot] [PATCH 01/21] drivers/video/am335x-fb: Add possibility to wait for stable power/picture Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 02/21] common/lcd: Add command for setting cursor within lcd-framework Hannes Petermaier
2015-02-01 14:48   ` Nikita Kiryanov
2015-02-02  7:32     ` Hannes Petermaier
2015-02-03 11:52       ` Nikita Kiryanov
2015-01-30 13:25 ` [U-Boot] [PATCH 03/21] common/lcd: Add command for writing to lcd-display Hannes Petermaier
2015-02-01 14:53   ` Nikita Kiryanov
2015-02-02  7:37     ` Hannes Petermaier
2015-02-03 11:53       ` Nikita Kiryanov
2015-01-30 13:25 ` [U-Boot] [PATCH 04/21] board/BuR/common: Take usage of am335x LCD-Display Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 05/21] board/BuR/common: try to setup cpsw mac-address from the devicetree Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 06/21] board/BuR/tseries: Enable HW-Watchdog Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 07/21] board/BuR/tseries: Enable U-Boot BOOTCOUNT feature Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 08/21] board/BuR/tseries: Enable EXT4 support Hannes Petermaier
2015-01-30 13:25 ` Hannes Petermaier [this message]
2015-01-30 13:25 ` [U-Boot] [PATCH 10/21] board/BuR/tseries: Chg pinmux - use free NAND Pins in non NAND-config as GPIO Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 11/21] board/BuR/tseries: Chg Pinmux - enable UART1 pins Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 12/21] board/BuR/common: Introduce Network Console and common environment for it Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 13/21] board/BuR/common: Enable CONFIG_CMD_TIME Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 14/21] board/BuR/common: Add support for displaying BMP on LCD Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 15/21] board/BuR/tseries: Rework default-environment settings Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 16/21] board/BuR/tseries: cosmetic changes Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 17/21] board/BuR/kwb: switch to board HW-Rev3 Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 18/21] board/BuR/kwb: Support booting Linux Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 19/21] board/BuR/kwb: Redesign default-environment Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 20/21] board/BuR/kwb: Form a bootline for vxWorks Hannes Petermaier
2015-01-30 13:25 ` [U-Boot] [PATCH 21/21] board/BuR/kwb: Support modify bootcmd through reset-controller Hannes Petermaier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422624324-15431-9-git-send-email-oe5hpm@oevsv.at \
    --to=oe5hpm@oevsv.at \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.