From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bin Meng Date: Mon, 2 Feb 2015 22:35:27 +0800 Subject: [U-Boot] [RFC PATCH v3 5/7] x86: Add basic Intel Quark processor support In-Reply-To: <1422887729-601-1-git-send-email-bmeng.cn@gmail.com> References: <1422887729-601-1-git-send-email-bmeng.cn@gmail.com> Message-ID: <1422887729-601-6-git-send-email-bmeng.cn@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add minimum codes to support Intel Quark SoC. DRAM initialization is not ready yet so a hardcoded gd->ram_size is assigned. Signed-off-by: Bin Meng --- Changes in v3: - Add simple help for ACPI PM1, PBLK and GEP0 Changes in v2: - Use machine-specific - Move vairous components' base addresses within Quark SoC to Kconfig - Rebase to u-boot-86/master arch/x86/cpu/quark/Kconfig | 121 +++++++++++++++++++++++++++++++++ arch/x86/cpu/quark/Makefile | 8 +++ arch/x86/cpu/quark/dram.c | 39 +++++++++++ arch/x86/cpu/quark/pci.c | 70 +++++++++++++++++++ arch/x86/cpu/quark/quark.c | 44 ++++++++++++ arch/x86/include/asm/arch-quark/gpio.h | 13 ++++ 6 files changed, 295 insertions(+) create mode 100644 arch/x86/cpu/quark/Kconfig create mode 100644 arch/x86/cpu/quark/Makefile create mode 100644 arch/x86/cpu/quark/dram.c create mode 100644 arch/x86/cpu/quark/pci.c create mode 100644 arch/x86/cpu/quark/quark.c create mode 100644 arch/x86/include/asm/arch-quark/gpio.h diff --git a/arch/x86/cpu/quark/Kconfig b/arch/x86/cpu/quark/Kconfig new file mode 100644 index 0000000..163caac --- /dev/null +++ b/arch/x86/cpu/quark/Kconfig @@ -0,0 +1,121 @@ +# +# Copyright (C) 2015, Bin Meng +# +# SPDX-License-Identifier: GPL-2.0+ +# + +config INTEL_QUARK + bool + select HAVE_RMU + +if INTEL_QUARK + +config HAVE_RMU + bool "Add a Remote Management Unit (RMU) binary" + help + Select this option to add a Remote Management Unit (RMU) binary + to the resulting U-Boot image. It is a data block (up to 64K) of + machine-specific code which must be put in the flash for the RMU + within the Quark SoC processor to access when powered up before + system BIOS is executed. + +config RMU_FILE + string "Remote Management Unit (RMU) binary filename" + depends on HAVE_RMU + default "rmu.bin" + help + The filename of the file to use as Remote Management Unit (RMU) + binary in the board directory. + +config RMU_ADDR + hex "Remote Management Unit (RMU) binary location" + depends on HAVE_RMU + default 0xfff00000 + help + The location of the RMU binary is determined by a strap. It must be + put in flash at a location matching the strap-determined base address. + + The default base address of 0xfff00000 indicates that the binary must + be located at offset 0 from the beginning of a 1MB flash device. + +config HAVE_CMC + bool + default HAVE_RMU + +config CMC_FILE + string + depends on HAVE_CMC + default RMU_FILE + +config CMC_ADDR + hex + depends on HAVE_CMC + default RMU_ADDR + +config ESRAM_BASE + hex + default 0x80000000 + help + Embedded SRAM (eSRAM) memory-mapped base address. + +config PCIE_ECAM_BASE + hex + default 0xe0000000 + +config RCBA_BASE + hex + default 0xfed1c000 + help + Root Complex register block memory-mapped base address. + +config ACPI_PM1_BASE + hex + default 0x1000 + help + ACPI Power Managment 1 (PM1) i/o-mapped base address. + This device is defined in ACPI specification, with 16 bytes in size. + +config ACPI_PBLK_BASE + hex + default 0x1010 + help + ACPI Processor Block (PBLK) i/o-mapped base address. + This device is defined in ACPI specification, with 16 bytes in size. + +config SPI_DMA_BASE + hex + default 0x1020 + help + SPI DMA i/o-mapped base address. + +config GPIO_BASE + hex + default 0x1080 + help + GPIO i/o-mapped base address. + +config ACPI_GPE0_BASE + hex + default 0x1100 + help + ACPI General Purpose Event 0 (GPE0) i/o-mapped base address. + This device is defined in ACPI specification, with 64 bytes in size. + +config WDT_BASE + hex + default 0x1140 + help + Watchdog timer i/o-mapped base address. + +config SYS_CAR_ADDR + hex + default ESRAM_BASE + +config SYS_CAR_SIZE + hex + default 0x8000 + help + Space in bytes in eSRAM used as Cache-As-ARM (CAR). + Note this size must not exceed eSRAM's total size. + +endif diff --git a/arch/x86/cpu/quark/Makefile b/arch/x86/cpu/quark/Makefile new file mode 100644 index 0000000..168c1e6 --- /dev/null +++ b/arch/x86/cpu/quark/Makefile @@ -0,0 +1,8 @@ +# +# Copyright (C) 2015, Bin Meng +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += car.o dram.o msg_port.o quark.o +obj-$(CONFIG_PCI) += pci.o diff --git a/arch/x86/cpu/quark/dram.c b/arch/x86/cpu/quark/dram.c new file mode 100644 index 0000000..fbdc3cd --- /dev/null +++ b/arch/x86/cpu/quark/dram.c @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2015, Bin Meng + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + /* hardcode the DRAM size for now */ + gd->ram_size = DRAM_MAX_SIZE; + post_code(POST_DRAM); + + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = 0; + gd->bd->bi_dram[0].size = gd->ram_size; +} + +/* + * This function looks for the highest region of memory lower than 4GB which + * has enough space for U-Boot where U-Boot is aligned on a page boundary. + * It overrides the default implementation found elsewhere which simply + * picks the end of ram, wherever that may be. The location of the stack, + * the relocation address, and how far U-Boot is moved by relocation are + * set in the global data structure. + */ +ulong board_get_usable_ram_top(ulong total_size) +{ + return gd->ram_size; +} diff --git a/arch/x86/cpu/quark/pci.c b/arch/x86/cpu/quark/pci.c new file mode 100644 index 0000000..354e15a --- /dev/null +++ b/arch/x86/cpu/quark/pci.c @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2015, Bin Meng + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +void board_pci_setup_hose(struct pci_controller *hose) +{ + hose->first_busno = 0; + hose->last_busno = 0; + + /* PCI memory space */ + pci_set_region(hose->regions + 0, + CONFIG_PCI_MEM_BUS, + CONFIG_PCI_MEM_PHYS, + CONFIG_PCI_MEM_SIZE, + PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 1, + CONFIG_PCI_IO_BUS, + CONFIG_PCI_IO_PHYS, + CONFIG_PCI_IO_SIZE, + PCI_REGION_IO); + + pci_set_region(hose->regions + 2, + CONFIG_PCI_PREF_BUS, + CONFIG_PCI_PREF_PHYS, + CONFIG_PCI_PREF_SIZE, + PCI_REGION_PREFETCH); + + pci_set_region(hose->regions + 3, + 0, + 0, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); + + hose->region_count = 4; +} + +int board_pci_post_scan(struct pci_controller *hose) +{ + return 0; +} + +int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) +{ + /* + * TODO: + * + * For some unknown reason, the PCI enumeration process hangs + * when it scans to the PCIe root port 0 (D23:F0) & 1 (D23:F1). + * + * For now we just skip these two devices, and this needs to + * be revisited later. + */ + if (dev == QUARK_HOST_BRIDGE || + dev == QUARK_PCIE0 || dev == QUARK_PCIE1) { + return 1; + } + + return 0; +} diff --git a/arch/x86/cpu/quark/quark.c b/arch/x86/cpu/quark/quark.c new file mode 100644 index 0000000..47ba152 --- /dev/null +++ b/arch/x86/cpu/quark/quark.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2015, Bin Meng + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +int arch_cpu_init(void) +{ + struct pci_controller *hose; + int ret; + + post_code(POST_CPU_INIT); +#ifdef CONFIG_SYS_X86_TSC_TIMER + timer_set_base(rdtsc()); +#endif + + ret = x86_cpu_init_f(); + if (ret) + return ret; + + ret = pci_early_init_hose(&hose); + if (ret) + return ret; + + return 0; +} + +int print_cpuinfo(void) +{ + post_code(POST_CPU_INFO); + return default_print_cpuinfo(); +} + +void reset_cpu(ulong addr) +{ + /* cold reset */ + outb(0x08, PORT_RESET); +} diff --git a/arch/x86/include/asm/arch-quark/gpio.h b/arch/x86/include/asm/arch-quark/gpio.h new file mode 100644 index 0000000..ca8cba4 --- /dev/null +++ b/arch/x86/include/asm/arch-quark/gpio.h @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2015, Bin Meng + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _X86_ARCH_GPIO_H_ +#define _X86_ARCH_GPIO_H_ + +/* Where in config space is the register that points to the GPIO registers? */ +#define PCI_CFG_GPIOBASE 0x44 + +#endif /* _X86_ARCH_GPIO_H_ */ -- 1.8.2.1