From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S966503AbbBDPWf (ORCPT ); Wed, 4 Feb 2015 10:22:35 -0500 Received: from mailapp01.imgtec.com ([195.59.15.196]:6178 "EHLO mailapp01.imgtec.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933869AbbBDPW3 (ORCPT ); Wed, 4 Feb 2015 10:22:29 -0500 From: Zubair Lutfullah Kakakhel To: CC: , , , , , , , , , , , , Subject: [PATCH_V2 00/34] jz4780 & CI20 support Date: Wed, 4 Feb 2015 15:21:29 +0000 Message-ID: <1423063323-19419-1-git-send-email-Zubair.Kakakhel@imgtec.com> X-Mailer: git-send-email 1.9.1 MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [192.168.154.89] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, This series introduces initial support for the Ingenic jz4780 SoC & the MIPS Creator CI20 board which is based upon it. The jz4780 shares aspects with jz4740. But jz4740 is platform only. So, the jz4740 & qi_lb60 (Ben NanoNote) are converted to use DT for some things in order to ease the process of sharing code. Series is based on 3.19-rc7. ACKS from various subsystems are welcome so that the series can go via mips if that is OK with everyone. Alternative suggestions welcome. Changes in V2 - Removed FSF addresses. - Removed 2 patches for binding docs that were consolidated in the same binding for jz4740. - Bug fix in error handling in cgu - Rebase on 3.19-rc7 - Updated defconfig with jz47xx serial and removed initramfs - Renames in binding from intc to interrupt-controller - Fix in jz47xx serial for build error on x86 in one config option - Removed interupt-parent bindings from required bindings - Fixed imgtec prefix to img - Added jz47xx config for qi_lb60_defconfig Regards, ZubairLK Paul Burton (34): dt: Add Ingenic Semiconductor vendor prefix MIPS: jz4740: require & include DT MIPS: irq_cpu: declare irqchip table entry MIPS: jz4740: probe CPU interrupt controller via DT MIPS: jz4740: use generic plat_irq_dispatch MIPS: jz4740: move arch_init_irq out of arch/mips/jz4740/irq.c dt: interrupt-controller: Add ingenic,jz4740-intc binding doc MIPS: jz4740: allow interrupt controller probe via DT MIPS: jz4740: probe interrupt controller via DT MIPS: jz4740: remove non-DT interrupt controller init MIPS: jz4740: register an irq_domain for the interrupt controller MIPS: jz4740: call jz4740_clock_init earlier MIPS: jz4740: replace use of jz4740_clock_bdata clk: jz47xx-cgu: add driver for Ingenic jz47xx series CGU clocks dt: clk: Add ingenic,jz4740-cgu binding documentation MIPS: clk: migrate jz4740 to common clock framework MIPS: clk: move jz4740_clock_set_wait_mode to jz4740-cgu MIPS: clk: move jz4740 UDC auto suspend functions to jz4740-cgu MIPS: clk: move jz4740 clock suspend, resume functions to jz4740-cgu MIPS: jz4740: remove clock.h MIPS: jz4740: only detect RAM size if not specified in DT MIPS: jz4740: support >32 interrupts MIPS: jz4740: define IRQ numbers based on number of intc IRQs dt: serial: Add ingenic,jz4740-uart binding serial: 8250_jz47xx: support for Ingenic jz47xx UARTs MIPS: allow mach-provided serial.h MIPS: jz4740: use jz47xx-uart & DT for UART output dt: clk: Add ingenic,jz4780-cgu binding documentation clk: add Ingenic jz4780 CGU driver MIPS: jz4740: add jz4780 interrupt controller support MIPS: add jz4780 Ingenic vendor ID MIPS: initial Ingenic jz4780 support MIPS: initial MIPS Creator CI20 board support MIPS: allow jz4780 to be selected in Kconfig .../bindings/clock/ingenic,jz4740-cgu.txt | 52 ++ .../bindings/clock/ingenic,jz4780-cgu.txt | 52 ++ .../interrupt-controller/ingenic,jz4740-intc.txt | 26 + .../bindings/serial/ingenic,jz4740-uart.txt | 22 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/mips/Kconfig | 22 +- arch/mips/boot/dts/Makefile | 2 + arch/mips/boot/dts/ci20.dts | 21 + arch/mips/boot/dts/jz4740.dtsi | 68 ++ arch/mips/boot/dts/jz4780.dtsi | 101 +++ arch/mips/boot/dts/qi_lb60.dts | 15 + arch/mips/configs/ci20_defconfig | 127 +++ arch/mips/configs/qi_lb60_defconfig | 1 + arch/mips/include/asm/Kbuild | 1 - arch/mips/include/asm/cpu.h | 1 + arch/mips/include/asm/mach-generic/serial.h | 21 + arch/mips/include/asm/mach-jz4740/clock.h | 3 + arch/mips/include/asm/mach-jz4740/irq.h | 15 +- arch/mips/include/asm/mach-jz4740/platform.h | 2 - arch/mips/include/asm/mach-jz4740/serial.h | 27 + arch/mips/include/asm/serial.h | 21 + arch/mips/jz4740/Kconfig | 10 + arch/mips/jz4740/Makefile | 6 +- arch/mips/jz4740/Platform | 4 + arch/mips/jz4740/board-qi_lb60.c | 7 - arch/mips/jz4740/clock-debugfs.c | 108 --- arch/mips/jz4740/clock.c | 924 --------------------- arch/mips/jz4740/clock.h | 76 -- arch/mips/jz4740/irq.c | 103 ++- arch/mips/jz4740/platform.c | 37 +- arch/mips/jz4740/pm.c | 2 - arch/mips/jz4740/prom.c | 13 - arch/mips/jz4740/reset.c | 13 +- arch/mips/jz4740/serial.c | 33 - arch/mips/jz4740/serial.h | 23 - arch/mips/jz4740/setup.c | 33 +- arch/mips/jz4740/time.c | 19 +- arch/mips/kernel/cpu-probe.c | 1 + arch/mips/kernel/irq_cpu.c | 3 + drivers/clk/Makefile | 2 + drivers/clk/jz47xx/Makefile | 3 + drivers/clk/jz47xx/jz4740-cgu.c | 295 +++++++ drivers/clk/jz47xx/jz4780-cgu.c | 742 +++++++++++++++++ drivers/clk/jz47xx/jz47xx-cgu.c | 723 ++++++++++++++++ drivers/clk/jz47xx/jz47xx-cgu.h | 205 +++++ drivers/tty/serial/8250/8250_jz47xx.c | 225 +++++ drivers/tty/serial/8250/Kconfig | 9 + drivers/tty/serial/8250/Makefile | 1 + include/dt-bindings/clock/jz4740-cgu.h | 37 + include/dt-bindings/clock/jz4780-cgu.h | 88 ++ 50 files changed, 3070 insertions(+), 1276 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4740-cgu.txt create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4780-cgu.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt create mode 100644 Documentation/devicetree/bindings/serial/ingenic,jz4740-uart.txt create mode 100644 arch/mips/boot/dts/ci20.dts create mode 100644 arch/mips/boot/dts/jz4740.dtsi create mode 100644 arch/mips/boot/dts/jz4780.dtsi create mode 100644 arch/mips/boot/dts/qi_lb60.dts create mode 100644 arch/mips/configs/ci20_defconfig create mode 100644 arch/mips/include/asm/mach-generic/serial.h create mode 100644 arch/mips/include/asm/mach-jz4740/serial.h create mode 100644 arch/mips/include/asm/serial.h delete mode 100644 arch/mips/jz4740/clock-debugfs.c delete mode 100644 arch/mips/jz4740/clock.c delete mode 100644 arch/mips/jz4740/clock.h delete mode 100644 arch/mips/jz4740/serial.c delete mode 100644 arch/mips/jz4740/serial.h create mode 100644 drivers/clk/jz47xx/Makefile create mode 100644 drivers/clk/jz47xx/jz4740-cgu.c create mode 100644 drivers/clk/jz47xx/jz4780-cgu.c create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.c create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.h create mode 100644 drivers/tty/serial/8250/8250_jz47xx.c create mode 100644 include/dt-bindings/clock/jz4740-cgu.h create mode 100644 include/dt-bindings/clock/jz4780-cgu.h -- 1.9.1 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Zubair Lutfullah Kakakhel Subject: [PATCH_V2 00/34] jz4780 & CI20 support Date: Wed, 4 Feb 2015 15:21:29 +0000 Message-ID: <1423063323-19419-1-git-send-email-Zubair.Kakakhel@imgtec.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-kernel-owner@vger.kernel.org To: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org, linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org, Zubair.Kakakhel@imgtec.com, gregkh@linuxfoundation.org, mturquette@linaro.org, sboyd@codeaurora.org, ralf@linux-mips.org, jslaby@suse.cz, tglx@linutronix.de, jason@lakedaemon.net, lars@metafoo.de, paul.burton@imgtec.com List-Id: devicetree@vger.kernel.org Hi, This series introduces initial support for the Ingenic jz4780 SoC & the MIPS Creator CI20 board which is based upon it. The jz4780 shares aspects with jz4740. But jz4740 is platform only. So, the jz4740 & qi_lb60 (Ben NanoNote) are converted to use DT for some things in order to ease the process of sharing code. Series is based on 3.19-rc7. ACKS from various subsystems are welcome so that the series can go via mips if that is OK with everyone. Alternative suggestions welcome. Changes in V2 - Removed FSF addresses. - Removed 2 patches for binding docs that were consolidated in the same binding for jz4740. - Bug fix in error handling in cgu - Rebase on 3.19-rc7 - Updated defconfig with jz47xx serial and removed initramfs - Renames in binding from intc to interrupt-controller - Fix in jz47xx serial for build error on x86 in one config option - Removed interupt-parent bindings from required bindings - Fixed imgtec prefix to img - Added jz47xx config for qi_lb60_defconfig Regards, ZubairLK Paul Burton (34): dt: Add Ingenic Semiconductor vendor prefix MIPS: jz4740: require & include DT MIPS: irq_cpu: declare irqchip table entry MIPS: jz4740: probe CPU interrupt controller via DT MIPS: jz4740: use generic plat_irq_dispatch MIPS: jz4740: move arch_init_irq out of arch/mips/jz4740/irq.c dt: interrupt-controller: Add ingenic,jz4740-intc binding doc MIPS: jz4740: allow interrupt controller probe via DT MIPS: jz4740: probe interrupt controller via DT MIPS: jz4740: remove non-DT interrupt controller init MIPS: jz4740: register an irq_domain for the interrupt controller MIPS: jz4740: call jz4740_clock_init earlier MIPS: jz4740: replace use of jz4740_clock_bdata clk: jz47xx-cgu: add driver for Ingenic jz47xx series CGU clocks dt: clk: Add ingenic,jz4740-cgu binding documentation MIPS: clk: migrate jz4740 to common clock framework MIPS: clk: move jz4740_clock_set_wait_mode to jz4740-cgu MIPS: clk: move jz4740 UDC auto suspend functions to jz4740-cgu MIPS: clk: move jz4740 clock suspend, resume functions to jz4740-cgu MIPS: jz4740: remove clock.h MIPS: jz4740: only detect RAM size if not specified in DT MIPS: jz4740: support >32 interrupts MIPS: jz4740: define IRQ numbers based on number of intc IRQs dt: serial: Add ingenic,jz4740-uart binding serial: 8250_jz47xx: support for Ingenic jz47xx UARTs MIPS: allow mach-provided serial.h MIPS: jz4740: use jz47xx-uart & DT for UART output dt: clk: Add ingenic,jz4780-cgu binding documentation clk: add Ingenic jz4780 CGU driver MIPS: jz4740: add jz4780 interrupt controller support MIPS: add jz4780 Ingenic vendor ID MIPS: initial Ingenic jz4780 support MIPS: initial MIPS Creator CI20 board support MIPS: allow jz4780 to be selected in Kconfig .../bindings/clock/ingenic,jz4740-cgu.txt | 52 ++ .../bindings/clock/ingenic,jz4780-cgu.txt | 52 ++ .../interrupt-controller/ingenic,jz4740-intc.txt | 26 + .../bindings/serial/ingenic,jz4740-uart.txt | 22 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/mips/Kconfig | 22 +- arch/mips/boot/dts/Makefile | 2 + arch/mips/boot/dts/ci20.dts | 21 + arch/mips/boot/dts/jz4740.dtsi | 68 ++ arch/mips/boot/dts/jz4780.dtsi | 101 +++ arch/mips/boot/dts/qi_lb60.dts | 15 + arch/mips/configs/ci20_defconfig | 127 +++ arch/mips/configs/qi_lb60_defconfig | 1 + arch/mips/include/asm/Kbuild | 1 - arch/mips/include/asm/cpu.h | 1 + arch/mips/include/asm/mach-generic/serial.h | 21 + arch/mips/include/asm/mach-jz4740/clock.h | 3 + arch/mips/include/asm/mach-jz4740/irq.h | 15 +- arch/mips/include/asm/mach-jz4740/platform.h | 2 - arch/mips/include/asm/mach-jz4740/serial.h | 27 + arch/mips/include/asm/serial.h | 21 + arch/mips/jz4740/Kconfig | 10 + arch/mips/jz4740/Makefile | 6 +- arch/mips/jz4740/Platform | 4 + arch/mips/jz4740/board-qi_lb60.c | 7 - arch/mips/jz4740/clock-debugfs.c | 108 --- arch/mips/jz4740/clock.c | 924 --------------------- arch/mips/jz4740/clock.h | 76 -- arch/mips/jz4740/irq.c | 103 ++- arch/mips/jz4740/platform.c | 37 +- arch/mips/jz4740/pm.c | 2 - arch/mips/jz4740/prom.c | 13 - arch/mips/jz4740/reset.c | 13 +- arch/mips/jz4740/serial.c | 33 - arch/mips/jz4740/serial.h | 23 - arch/mips/jz4740/setup.c | 33 +- arch/mips/jz4740/time.c | 19 +- arch/mips/kernel/cpu-probe.c | 1 + arch/mips/kernel/irq_cpu.c | 3 + drivers/clk/Makefile | 2 + drivers/clk/jz47xx/Makefile | 3 + drivers/clk/jz47xx/jz4740-cgu.c | 295 +++++++ drivers/clk/jz47xx/jz4780-cgu.c | 742 +++++++++++++++++ drivers/clk/jz47xx/jz47xx-cgu.c | 723 ++++++++++++++++ drivers/clk/jz47xx/jz47xx-cgu.h | 205 +++++ drivers/tty/serial/8250/8250_jz47xx.c | 225 +++++ drivers/tty/serial/8250/Kconfig | 9 + drivers/tty/serial/8250/Makefile | 1 + include/dt-bindings/clock/jz4740-cgu.h | 37 + include/dt-bindings/clock/jz4780-cgu.h | 88 ++ 50 files changed, 3070 insertions(+), 1276 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4740-cgu.txt create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4780-cgu.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt create mode 100644 Documentation/devicetree/bindings/serial/ingenic,jz4740-uart.txt create mode 100644 arch/mips/boot/dts/ci20.dts create mode 100644 arch/mips/boot/dts/jz4740.dtsi create mode 100644 arch/mips/boot/dts/jz4780.dtsi create mode 100644 arch/mips/boot/dts/qi_lb60.dts create mode 100644 arch/mips/configs/ci20_defconfig create mode 100644 arch/mips/include/asm/mach-generic/serial.h create mode 100644 arch/mips/include/asm/mach-jz4740/serial.h create mode 100644 arch/mips/include/asm/serial.h delete mode 100644 arch/mips/jz4740/clock-debugfs.c delete mode 100644 arch/mips/jz4740/clock.c delete mode 100644 arch/mips/jz4740/clock.h delete mode 100644 arch/mips/jz4740/serial.c delete mode 100644 arch/mips/jz4740/serial.h create mode 100644 drivers/clk/jz47xx/Makefile create mode 100644 drivers/clk/jz47xx/jz4740-cgu.c create mode 100644 drivers/clk/jz47xx/jz4780-cgu.c create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.c create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.h create mode 100644 drivers/tty/serial/8250/8250_jz47xx.c create mode 100644 include/dt-bindings/clock/jz4740-cgu.h create mode 100644 include/dt-bindings/clock/jz4780-cgu.h -- 1.9.1