All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Hung <hpeter@gmail.com>
To: johan@kernel.org
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, tom_tsai@fintek.com.tw,
	peter_hong@fintek.com.tw,
	Peter Hung <hpeter+linux_kernel@gmail.com>
Subject: [PATCH V6 05/10] USB: f81232: implement MCR/MSR function
Date: Mon, 16 Feb 2015 15:57:57 +0800	[thread overview]
Message-ID: <1424073482-18164-6-git-send-email-hpeter+linux_kernel@gmail.com> (raw)
In-Reply-To: <1424073482-18164-1-git-send-email-hpeter+linux_kernel@gmail.com>

This patch implement relative MCR/MSR function, such like
tiocmget()/tiocmset()/dtr_rts().

The f81232_set_mctrl() replace set_control_lines() to do MCR control
so we clean-up the set_control_lines() function.

Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
---
 drivers/usb/serial/f81232.c | 98 +++++++++++++++++++++++++++++++++++----------
 1 file changed, 77 insertions(+), 21 deletions(-)

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 06d1eb0..e1cdf42 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -44,6 +44,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
 #define INTERRUPT_ENABLE_REGISTER  (0x01 + SERIAL_BASE_ADDRESS)
 #define FIFO_CONTROL_REGISTER      (0x02 + SERIAL_BASE_ADDRESS)
 #define LINE_CONTROL_REGISTER      (0x03 + SERIAL_BASE_ADDRESS)
+#define MODEM_CONTROL_REGISTER     (0x04 + SERIAL_BASE_ADDRESS)
 #define MODEM_STATUS_REGISTER      (0x06 + SERIAL_BASE_ADDRESS)
 
 #define CONTROL_DTR			0x01
@@ -156,6 +157,50 @@ static void f81232_read_msr(struct usb_serial_port *port)
 	wake_up_interruptible(&port->port.delta_msr_wait);
 }
 
+static int f81232_set_mctrl(struct usb_serial_port *port,
+					   unsigned int set, unsigned int clear)
+{
+	u8 urb_value;
+	int status;
+	unsigned long flags;
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0)
+		return 0;	/* no change */
+
+	/* 'set' takes precedence over 'clear' */
+	clear &= ~set;
+
+	/* force enable interrupt with OUT2 */
+	urb_value = UART_MCR_OUT2 | priv->line_control;
+
+	if (clear & TIOCM_DTR)
+		urb_value &= ~UART_MCR_DTR;
+
+	if (clear & TIOCM_RTS)
+		urb_value &= ~UART_MCR_RTS;
+
+	if (set & TIOCM_DTR)
+		urb_value |= UART_MCR_DTR;
+
+	if (set & TIOCM_RTS)
+		urb_value |= UART_MCR_RTS;
+
+	dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__,
+			urb_value, priv->line_control);
+
+	status = f81232_set_register(port, MODEM_CONTROL_REGISTER, urb_value);
+	if (status < 0) {
+		dev_err(&port->dev, "%s set MCR status < 0\n", __func__);
+	} else {
+		spin_lock_irqsave(&priv->lock, flags);
+		priv->line_control = urb_value;
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+
+	return status;
+}
+
 static void f81232_update_modem_status(struct usb_serial_port *port,
 				      unsigned char *data,
 				      unsigned int actual_length)
@@ -267,12 +312,6 @@ static void f81232_process_read_urb(struct urb *urb)
 	tty_flip_buffer_push(&port->port);
 }
 
-static int set_control_lines(struct usb_device *dev, u8 value)
-{
-	/* FIXME - Stubbed out for now */
-	return 0;
-}
-
 static void f81232_break_ctl(struct tty_struct *tty, int break_state)
 {
 	/* FIXME - Stubbed out for now */
@@ -388,15 +427,41 @@ static void f81232_set_termios(struct tty_struct *tty,
 
 static int f81232_tiocmget(struct tty_struct *tty)
 {
-	/* FIXME - Stubbed out for now */
-	return 0;
+	int r;
+	struct usb_serial_port *port = tty->driver_data;
+	struct f81232_private *port_priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 mcr, msr;
+
+	/* force get current MSR changed state */
+	f81232_read_msr(port);
+
+	spin_lock_irqsave(&port_priv->lock, flags);
+	mcr = port_priv->line_control;
+	msr = port_priv->modem_status;
+	spin_unlock_irqrestore(&port_priv->lock, flags);
+
+	r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
+		(mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
+		(msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
+		(msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
+		(msr & UART_MSR_RI ? TIOCM_RI : 0) |
+		(msr & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+	return r;
 }
 
 static int f81232_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear)
 {
-	/* FIXME - Stubbed out for now */
-	return 0;
+	int status;
+	struct usb_serial_port *port = tty->driver_data;
+
+	status = f81232_set_mctrl(port, set, clear);
+	if (status < 0)
+		return usb_translate_errors(status);
+	else
+		return 0;
 }
 
 static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -437,19 +502,10 @@ static void f81232_close(struct usb_serial_port *port)
 
 static void f81232_dtr_rts(struct usb_serial_port *port, int on)
 {
-	struct f81232_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-	u8 control;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	/* Change DTR and RTS */
 	if (on)
-		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+		f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
 	else
-		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
-	control = priv->line_control;
-	spin_unlock_irqrestore(&priv->lock, flags);
-	set_control_lines(port->serial->dev, control);
+		f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
 }
 
 static int f81232_carrier_raised(struct usb_serial_port *port)
-- 
1.9.1


  parent reply	other threads:[~2015-02-16  7:58 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-16  7:57 [PATCH V6 00/10] USB: f81232: V6 patches Peter Hung
2015-02-16  7:57 ` [PATCH V6 01/10] USB: f81232: rename private struct member name Peter Hung
2015-02-16  7:57 ` [PATCH V6 02/10] USB: f81232: implement read IIR/MSR with endpoint Peter Hung
2015-02-17  8:30   ` Johan Hovold
2015-02-16  7:57 ` [PATCH V6 03/10] USB: f81232: implement RX bulk-in ep Peter Hung
2015-02-16 19:41   ` Greg KH
2015-02-17  1:41     ` Peter Hung
2015-02-17 10:06     ` David Laight
2015-02-17 14:48       ` 'Greg KH'
2015-02-16  7:57 ` [PATCH V6 04/10] USB: f81232: implement set_termios Peter Hung
2015-02-17  8:59   ` Johan Hovold
2015-02-16  7:57 ` Peter Hung [this message]
2015-02-17  9:40   ` [PATCH V6 05/10] USB: f81232: implement MCR/MSR function Johan Hovold
2015-02-16  7:57 ` [PATCH V6 06/10] USB: f81232: clarify f81232_ioctl and fix Peter Hung
2015-02-16  7:57 ` [PATCH V6 07/10] USB: f81232: fix error in f81232_carrier_raised() Peter Hung
2015-02-17  9:44   ` Johan Hovold
2015-02-16  7:58 ` [PATCH V6 08/10] USB: f81232: fix read MSR strange value Peter Hung
2015-02-17  9:51   ` Johan Hovold
2015-02-24  2:17     ` Peter Hung
2015-02-16  7:58 ` [PATCH V6 09/10] USB: f81232: implement delta change for MSR count Peter Hung
2015-02-16  7:58 ` [PATCH V6 10/10] USB: f81232: modify/add author Peter Hung

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1424073482-18164-6-git-send-email-hpeter+linux_kernel@gmail.com \
    --to=hpeter@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hpeter+linux_kernel@gmail.com \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=peter_hong@fintek.com.tw \
    --cc=tom_tsai@fintek.com.tw \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.