All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Stultz <john.stultz@linaro.org>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: John Stultz <john.stultz@linaro.org>,
	Shuah Khan <shuahkh@osg.samsung.com>,
	Prarit Bhargava <prarit@redhat.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Richard Cochran <richardcochran@gmail.com>
Subject: [PATCH 18/19] selftests/timers: Add set-2038 test from timetest suite
Date: Mon,  2 Mar 2015 13:10:11 -0800	[thread overview]
Message-ID: <1425330612-24280-19-git-send-email-john.stultz@linaro.org> (raw)
In-Reply-To: <1425330612-24280-1-git-send-email-john.stultz@linaro.org>

Adds the set-2038 test which sets the time to near-edge cases
like the start and end of the 32 bit epoch and checks that
time behaves properly. There is also a dangerous mode, which
lets the clock roll over past 2038 on 32bit systems, which
on some older kernels will cause system hangs.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
 tools/testing/selftests/timers/Makefile   |   3 +-
 tools/testing/selftests/timers/set-2038.c | 147 ++++++++++++++++++++++++++++++
 2 files changed, 149 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/timers/set-2038.c

diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile
index 7e2fba7..9da3498 100644
--- a/tools/testing/selftests/timers/Makefile
+++ b/tools/testing/selftests/timers/Makefile
@@ -5,7 +5,7 @@ LDFLAGS += -lrt -lpthread
 bins = posix_timers nanosleep inconsistency-check nsleep-lat raw_skew \
 	set-timer-lat threadtest mqueue-lat valid-adjtimex \
 	alarmtimer-suspend change_skew skew_consistency clocksource-switch \
-	leap-a-day leapcrash set-tai
+	leap-a-day leapcrash set-tai set-2038
 
 all: ${bins}
 
@@ -33,6 +33,7 @@ run_destructive_tests: run_tests
 	./leap-a-day -s -i 10
 	./leapcrash
 	./set-tai
+	./set-2038
 
 clean:
 	rm -f ${bins}
diff --git a/tools/testing/selftests/timers/set-2038.c b/tools/testing/selftests/timers/set-2038.c
new file mode 100644
index 0000000..0f23923
--- /dev/null
+++ b/tools/testing/selftests/timers/set-2038.c
@@ -0,0 +1,147 @@
+/* Time bounds setting test
+ *		by: john stultz (johnstul@us.ibm.com)
+ *		(C) Copyright IBM 2012
+ *		Licensed under the GPLv2
+ *
+ *  NOTE: This is a meta-test which sets the time to edge cases then
+ *  uses other tests to detect problems. Thus this test requires that
+ *  the inconsistency-check and nanosleep tests be present in the same
+ *  directory it is run from.
+ *
+ *  To build:
+ *	$ gcc set-2038.c -o set-2038 -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <time.h>
+#include <sys/time.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+	exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+	exit(1);
+}
+#endif
+
+extern char *optarg;
+
+#define NSEC_PER_SEC 1000000000LL
+
+#define KTIME_MAX	((long long)~((unsigned long long)1 << 63))
+#define KTIME_SEC_MAX	(KTIME_MAX / NSEC_PER_SEC)
+
+#define YEAR_1901 (-0x7fffffffL)
+#define YEAR_1970 1
+#define YEAR_2038 0x7fffffffL			/*overflows 32bit time_t */
+#define YEAR_2262 KTIME_SEC_MAX			/*overflows 64bit ktime_t */
+#define YEAR_MAX  ((long long)((1ULL<<63)-1))	/*overflows 64bit time_t */
+
+int is32bits(void)
+{
+	return (sizeof(long) == 4);
+}
+
+int settime(long long time)
+{
+	struct timeval now;
+	int ret;
+
+	now.tv_sec = (time_t)time;
+	now.tv_usec  = 0;
+
+	ret = settimeofday(&now, NULL);
+
+	printf("Setting time to 0x%lx: %d\n", (long)time, ret);
+	return ret;
+}
+
+int do_tests(void)
+{
+	int ret;
+
+	ret = system("date");
+	ret = system("./inconsistency-check -c 0 -t 20");
+	ret |= system("./nanosleep");
+	ret |= system("./nsleep-lat");
+	return ret;
+
+}
+
+int main(int argc, char *argv[])
+{
+	int ret = 0;
+	int opt, dangerous = 0;
+	time_t start;
+
+	/* Process arguments */
+	while ((opt = getopt(argc, argv, "d")) != -1) {
+		switch (opt) {
+		case 'd':
+			dangerous = 1;
+		}
+	}
+
+	start = time(0);
+
+	/* First test that crazy values don't work */
+	if (!settime(YEAR_1901)) {
+		ret = -1;
+		goto out;
+	}
+	if (!settime(YEAR_MAX)) {
+		ret = -1;
+		goto out;
+	}
+	if (!is32bits() && !settime(YEAR_2262)) {
+		ret = -1;
+		goto out;
+	}
+
+	/* Now test behavior near edges */
+	settime(YEAR_1970);
+	ret = do_tests();
+	if (ret)
+		goto out;
+
+	settime(YEAR_2038 - 600);
+	ret = do_tests();
+	if (ret)
+		goto out;
+
+	/* The rest of the tests can blowup on 32bit systems */
+	if (is32bits() && !dangerous)
+		goto out;
+	/* Test rollover behavior 32bit edge */
+	settime(YEAR_2038 - 10);
+	ret = do_tests();
+	if (ret)
+		goto out;
+
+	settime(YEAR_2262 - 600);
+	ret = do_tests();
+
+out:
+	/* restore clock */
+	settime(start);
+	if (ret)
+		return ksft_exit_fail();
+	return ksft_exit_pass();
+}
+
-- 
1.9.1


  parent reply	other threads:[~2015-03-02 21:11 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-02 21:09 [PATCH 00/19 v3] Add timekeeping tests to kernel selftest John Stultz
2015-03-02 21:09 ` [PATCH 01/19] selftests/timers: Cleanup Makefile to make it easier to add future tests John Stultz
2015-03-02 21:09 ` [PATCH 02/19] selftests/timers: Quiet warning due to lack of return check on brk John Stultz
2015-03-02 21:09 ` [PATCH 03/19] selftests/timers: Add nanosleep test from timetest suite John Stultz
2015-03-02 21:09 ` [PATCH 04/19] selftests/timers: Add inconsistency-check test from timetests John Stultz
2015-03-02 21:09 ` [PATCH 05/19] selftests/timers: Add nsleep-lat test from timetest suite John Stultz
2015-03-02 21:09 ` [PATCH 06/19] selftests/timers: Add clock skew estimation " John Stultz
2015-03-02 21:10 ` [PATCH 07/19] selftests/timers: Add set-timer-lat " John Stultz
2015-03-02 21:10 ` [PATCH 08/19] selftests/timers: Add threaded time inconsistency " John Stultz
2015-03-02 21:10 ` [PATCH 09/19] selftests/timers: Add mqueue latency test from the " John Stultz
2015-03-02 21:10 ` [PATCH 10/19] selftests/timers: Add adjtimex validation test from " John Stultz
2015-03-02 21:10 ` [PATCH 11/19] selftests/timers: Add alarmtimer-suspend test from timetests suite John Stultz
2015-03-02 21:10 ` [PATCH 12/19] selftests/timers: Add change_skew test from timetest suite John Stultz
2015-03-02 21:10 ` [PATCH 13/19] selftests/timers: Add skew_consistency test from the timetests suite John Stultz
2015-03-02 21:10 ` [PATCH 14/19] selftests/timers: Add clocksource-switch test from timetest suite John Stultz
2015-03-02 21:10 ` [PATCH 15/19] selftests/timers: Add leap-a-day " John Stultz
2015-03-02 21:10 ` [PATCH 16/19] selftests/timers: Add leapcrash test from the " John Stultz
2015-03-02 21:10 ` [PATCH 17/19] selftests/timers: Add set-tai " John Stultz
2015-03-02 21:10 ` John Stultz [this message]
2015-03-02 21:10 ` [PATCH 19/19] MAINTAINERS: Add selftests/timers to the timekeeping maintainance list John Stultz
2015-03-03 12:14 ` [PATCH 00/19 v3] Add timekeeping tests to kernel selftest Prarit Bhargava
2015-03-11 16:43 ` Shuah Khan
2015-03-11 16:53   ` John Stultz
2015-03-11 17:04     ` Shuah Khan
2015-03-11 17:10       ` John Stultz
  -- strict thread matches above, loose matches on Subject: below --
2015-03-12  0:39 [PATCH 00/19 v4] Add timekeeping tests to kernel selftests John Stultz
2015-03-12  0:40 ` [PATCH 18/19] selftests/timers: Add set-2038 test from timetest suite John Stultz
2015-02-25 22:32 [RFC][PATCH 00/19] Add timekeeping tests to kernel selftest John Stultz
2015-02-25 22:32 ` [PATCH 18/19] selftests/timers: Add set-2038 test from timetest suite John Stultz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1425330612-24280-19-git-send-email-john.stultz@linaro.org \
    --to=john.stultz@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=prarit@redhat.com \
    --cc=richardcochran@gmail.com \
    --cc=shuahkh@osg.samsung.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.