From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peng Fan Date: Tue, 10 Mar 2015 15:33:25 +0800 Subject: [U-Boot] [PATCH 2/2] imx:mx6slevk support reading temperature In-Reply-To: <1425972805-9489-1-git-send-email-Peng.Fan@freescale.com> References: <1425972805-9489-1-git-send-email-Peng.Fan@freescale.com> Message-ID: <1425972805-9489-2-git-send-email-Peng.Fan@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This patch is to support reading temperature for mx6slevk board. Signed-off-by: Peng Fan --- configs/mx6slevk_defconfig | 4 ++++ configs/mx6slevk_spinor_defconfig | 4 ++++ include/configs/mx6slevk.h | 7 +++++++ 3 files changed, 15 insertions(+) diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig index fb8c4de..c6b3108 100644 --- a/configs/mx6slevk_defconfig +++ b/configs/mx6slevk_defconfig @@ -1,3 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL" CONFIG_ARM=y CONFIG_TARGET_MX6SLEVK=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig index 93efe73..454cb40 100644 --- a/configs/mx6slevk_spinor_defconfig +++ b/configs/mx6slevk_spinor_defconfig @@ -1,3 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL,SYS_BOOT_SPINOR" CONFIG_ARM=y CONFIG_TARGET_MX6SLEVK=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 1221418..0a2fa27 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -251,4 +251,11 @@ #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC2*/ #endif +#define CONFIG_IMX6_THERMAL + +#define CONFIG_CMD_FUSE +#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) +#define CONFIG_MXC_OCOTP +#endif + #endif /* __CONFIG_H */ -- 1.8.4