From: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Subject: [PATCH 17/19] drm/i915: Convert intel_pipe_will_have_type() to using atomic state
Date: Fri, 13 Mar 2015 11:49:00 +0200 [thread overview]
Message-ID: <1426240142-24538-18-git-send-email-ander.conselvan.de.oliveira@intel.com> (raw)
In-Reply-To: <1426240142-24538-1-git-send-email-ander.conselvan.de.oliveira@intel.com>
Pass a crtc_state to it and find whether the pipe has an encoder of a
given type by looking at the drm_atomic_state the crtc_state points to.
Until recently i9xx_get_refclk() used to be called indirectly from
vlv_force_pll_on() with a dummy crtc_state. That dummy crtc state is not
converted to be part of a full drm atomic state, so add a WARN in case
someone decides to call that again with such a dummy state.
v2: Warn if there is no connectors for a given crtc. (Daniel)
Replace comment i9xx_get_refclk() with a WARN_ON(). (Ander)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 2 +-
drivers/gpu/drm/i915/intel_display.c | 133 +++++++++++++++++++++--------------
2 files changed, 83 insertions(+), 52 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 490ab8c..576e101 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -541,7 +541,7 @@ struct drm_i915_display_funcs {
* Returns true on success, false on failure.
*/
bool (*find_dpll)(const struct intel_limit *limit,
- struct intel_crtc *crtc,
+ struct intel_crtc_state *crtc_state,
int target, int refclk,
struct dpll *match_clock,
struct dpll *best_clock);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 8c97186..be1979e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -431,25 +431,41 @@ bool intel_pipe_has_type(struct intel_crtc *crtc, enum intel_output_type type)
* intel_pipe_has_type() but looking at encoder->new_crtc instead of
* encoder->crtc.
*/
-static bool intel_pipe_will_have_type(struct intel_crtc *crtc, int type)
+static bool intel_pipe_will_have_type(const struct intel_crtc_state *crtc_state,
+ int type)
{
- struct drm_device *dev = crtc->base.dev;
+ struct drm_atomic_state *state = crtc_state->base.state;
+ struct drm_connector_state *connector_state;
struct intel_encoder *encoder;
+ int i, num_connectors = 0;
+
+ for (i = 0; i < state->num_connector; i++) {
+ if (!state->connectors[i])
+ continue;
+
+ connector_state = state->connector_states[i];
+ if (connector_state->crtc != crtc_state->base.crtc)
+ continue;
+
+ num_connectors++;
- for_each_intel_encoder(dev, encoder)
- if (encoder->new_crtc == crtc && encoder->type == type)
+ encoder = to_intel_encoder(connector_state->best_encoder);
+ if (encoder->type == type)
return true;
+ }
+
+ WARN_ON(num_connectors == 0);
return false;
}
-static const intel_limit_t *intel_ironlake_limit(struct intel_crtc *crtc,
- int refclk)
+static const intel_limit_t *
+intel_ironlake_limit(struct intel_crtc_state *crtc_state, int refclk)
{
- struct drm_device *dev = crtc->base.dev;
+ struct drm_device *dev = crtc_state->base.crtc->dev;
const intel_limit_t *limit;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_is_dual_link_lvds(dev)) {
if (refclk == 100000)
limit = &intel_limits_ironlake_dual_lvds_100m;
@@ -467,20 +483,21 @@ static const intel_limit_t *intel_ironlake_limit(struct intel_crtc *crtc,
return limit;
}
-static const intel_limit_t *intel_g4x_limit(struct intel_crtc *crtc)
+static const intel_limit_t *
+intel_g4x_limit(struct intel_crtc_state *crtc_state)
{
- struct drm_device *dev = crtc->base.dev;
+ struct drm_device *dev = crtc_state->base.crtc->dev;
const intel_limit_t *limit;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_is_dual_link_lvds(dev))
limit = &intel_limits_g4x_dual_channel_lvds;
else
limit = &intel_limits_g4x_single_channel_lvds;
- } else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_HDMI) ||
- intel_pipe_will_have_type(crtc, INTEL_OUTPUT_ANALOG)) {
+ } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI) ||
+ intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
limit = &intel_limits_g4x_hdmi;
- } else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_SDVO)) {
+ } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO)) {
limit = &intel_limits_g4x_sdvo;
} else /* The option is for other outputs */
limit = &intel_limits_i9xx_sdvo;
@@ -488,17 +505,18 @@ static const intel_limit_t *intel_g4x_limit(struct intel_crtc *crtc)
return limit;
}
-static const intel_limit_t *intel_limit(struct intel_crtc *crtc, int refclk)
+static const intel_limit_t *
+intel_limit(struct intel_crtc_state *crtc_state, int refclk)
{
- struct drm_device *dev = crtc->base.dev;
+ struct drm_device *dev = crtc_state->base.crtc->dev;
const intel_limit_t *limit;
if (HAS_PCH_SPLIT(dev))
- limit = intel_ironlake_limit(crtc, refclk);
+ limit = intel_ironlake_limit(crtc_state, refclk);
else if (IS_G4X(dev)) {
- limit = intel_g4x_limit(crtc);
+ limit = intel_g4x_limit(crtc_state);
} else if (IS_PINEVIEW(dev)) {
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
limit = &intel_limits_pineview_lvds;
else
limit = &intel_limits_pineview_sdvo;
@@ -507,14 +525,14 @@ static const intel_limit_t *intel_limit(struct intel_crtc *crtc, int refclk)
} else if (IS_VALLEYVIEW(dev)) {
limit = &intel_limits_vlv;
} else if (!IS_GEN2(dev)) {
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
limit = &intel_limits_i9xx_lvds;
else
limit = &intel_limits_i9xx_sdvo;
} else {
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
limit = &intel_limits_i8xx_lvds;
- else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_DVO))
+ else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO))
limit = &intel_limits_i8xx_dvo;
else
limit = &intel_limits_i8xx_dac;
@@ -601,15 +619,17 @@ static bool intel_PLL_is_valid(struct drm_device *dev,
}
static bool
-i9xx_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
+i9xx_find_best_dpll(const intel_limit_t *limit,
+ struct intel_crtc_state *crtc_state,
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_device *dev = crtc->base.dev;
intel_clock_t clock;
int err = target;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
/*
* For LVDS just rely on its current settings for dual-channel.
* We haven't figured out how to reliably set up different
@@ -662,15 +682,17 @@ i9xx_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
}
static bool
-pnv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
+pnv_find_best_dpll(const intel_limit_t *limit,
+ struct intel_crtc_state *crtc_state,
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_device *dev = crtc->base.dev;
intel_clock_t clock;
int err = target;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
/*
* For LVDS just rely on its current settings for dual-channel.
* We haven't figured out how to reliably set up different
@@ -721,10 +743,12 @@ pnv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
}
static bool
-g4x_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
+g4x_find_best_dpll(const intel_limit_t *limit,
+ struct intel_crtc_state *crtc_state,
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_device *dev = crtc->base.dev;
intel_clock_t clock;
int max_n;
@@ -733,7 +757,7 @@ g4x_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
int err_most = (target >> 8) + (target >> 9);
found = false;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_is_dual_link_lvds(dev))
clock.p2 = limit->p2.p2_fast;
else
@@ -778,10 +802,12 @@ g4x_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
}
static bool
-vlv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
+vlv_find_best_dpll(const intel_limit_t *limit,
+ struct intel_crtc_state *crtc_state,
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_device *dev = crtc->base.dev;
intel_clock_t clock;
unsigned int bestppm = 1000000;
@@ -835,10 +861,12 @@ vlv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
}
static bool
-chv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
+chv_find_best_dpll(const intel_limit_t *limit,
+ struct intel_crtc_state *crtc_state,
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_device *dev = crtc->base.dev;
intel_clock_t clock;
uint64_t m2;
@@ -5726,7 +5754,7 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
* - LVDS dual channel mode
* - Double wide pipe
*/
- if ((intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
+ if ((intel_pipe_will_have_type(pipe_config, INTEL_OUTPUT_LVDS) &&
intel_is_dual_link_lvds(dev)) || pipe_config->double_wide)
pipe_config->pipe_src_w &= ~1;
@@ -5905,15 +5933,18 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
}
-static int i9xx_get_refclk(struct intel_crtc *crtc, int num_connectors)
+static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
+ int num_connectors)
{
- struct drm_device *dev = crtc->base.dev;
+ struct drm_device *dev = crtc_state->base.crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int refclk;
+ WARN_ON(!crtc_state->base.state);
+
if (IS_VALLEYVIEW(dev)) {
refclk = 100000;
- } else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
+ } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
refclk = dev_priv->vbt.lvds_ssc_freq;
DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
@@ -5956,7 +5987,7 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
crtc_state->dpll_hw_state.fp0 = fp;
crtc->lowfreq_avail = false;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
reduced_clock && i915.powersave) {
crtc_state->dpll_hw_state.fp1 = fp2;
crtc->lowfreq_avail = true;
@@ -6314,6 +6345,7 @@ void vlv_force_pll_on(struct drm_device *dev, enum pipe pipe,
struct intel_crtc *crtc =
to_intel_crtc(intel_get_crtc_for_pipe(dev, pipe));
struct intel_crtc_state pipe_config = {
+ .base.crtc = &crtc->base,
.pixel_multiplier = 1,
.dpll = *dpll,
};
@@ -6358,12 +6390,12 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
- is_sdvo = intel_pipe_will_have_type(crtc, INTEL_OUTPUT_SDVO) ||
- intel_pipe_will_have_type(crtc, INTEL_OUTPUT_HDMI);
+ is_sdvo = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO) ||
+ intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI);
dpll = DPLL_VGA_MODE_DIS;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
dpll |= DPLLB_MODE_LVDS;
else
dpll |= DPLLB_MODE_DAC_SERIAL;
@@ -6406,7 +6438,7 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
if (crtc_state->sdvo_tv_clock)
dpll |= PLL_REF_INPUT_TVCLKINBC;
- else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
+ else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv) && num_connectors < 2)
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
@@ -6436,7 +6468,7 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
dpll = DPLL_VGA_MODE_DIS;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
} else {
if (clock->p1 == 2)
@@ -6447,10 +6479,10 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
dpll |= PLL_P2_DIVIDE_BY_4;
}
- if (!IS_I830(dev) && intel_pipe_will_have_type(crtc, INTEL_OUTPUT_DVO))
+ if (!IS_I830(dev) && intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO))
dpll |= DPLL_DVO_2X_MODE;
- if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
+ if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv) && num_connectors < 2)
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
@@ -6687,7 +6719,7 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
return 0;
if (!crtc_state->clock_set) {
- refclk = i9xx_get_refclk(crtc, num_connectors);
+ refclk = i9xx_get_refclk(crtc_state, num_connectors);
/*
* Returns a set of divisors for the desired target clock with
@@ -6695,8 +6727,8 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
* the clock equation: reflck * (5 * (m1 + 2) + (m2 + 2)) / (n +
* 2) / p1 / p2.
*/
- limit = intel_limit(crtc, refclk);
- ok = dev_priv->display.find_dpll(limit, crtc,
+ limit = intel_limit(crtc_state, refclk);
+ ok = dev_priv->display.find_dpll(limit, crtc_state,
crtc_state->port_clock,
refclk, NULL, &clock);
if (!ok) {
@@ -6712,7 +6744,7 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
* we will disable the LVDS downclock feature.
*/
has_reduced_clock =
- dev_priv->display.find_dpll(limit, crtc,
+ dev_priv->display.find_dpll(limit, crtc_state,
dev_priv->lvds_downclock,
refclk, &clock,
&reduced_clock);
@@ -7540,12 +7572,11 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int refclk;
const intel_limit_t *limit;
bool ret, is_lvds = false;
- is_lvds = intel_pipe_will_have_type(intel_crtc, INTEL_OUTPUT_LVDS);
+ is_lvds = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS);
refclk = ironlake_get_refclk(crtc);
@@ -7554,8 +7585,8 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
* refclk, or FALSE. The returned values represent the clock equation:
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*/
- limit = intel_limit(intel_crtc, refclk);
- ret = dev_priv->display.find_dpll(limit, intel_crtc,
+ limit = intel_limit(crtc_state, refclk);
+ ret = dev_priv->display.find_dpll(limit, crtc_state,
crtc_state->port_clock,
refclk, NULL, clock);
if (!ret)
@@ -7569,7 +7600,7 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
* downclock feature.
*/
*has_reduced_clock =
- dev_priv->display.find_dpll(limit, intel_crtc,
+ dev_priv->display.find_dpll(limit, crtc_state,
dev_priv->lvds_downclock,
refclk, clock,
reduced_clock);
--
2.1.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-03-13 9:49 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-13 9:48 [PATCH v2 00/19] Remove depencies on staged config for atomic transition Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 01/19] drm/i915: Add intel_atomic_get_crtc_state() helper function Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 02/19] drm/i915: Pass acquire ctx also to intel_release_load_detect_pipe() Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 03/19] drm/i915: Allocate a drm_atomic_state for the legacy modeset code Ander Conselvan de Oliveira
2015-03-17 6:46 ` [PATCH v3] " Ander Conselvan de Oliveira
2015-03-18 7:57 ` [PATCH v4] " Ander Conselvan de Oliveira
2015-03-18 23:57 ` Konduru, Chandra
2015-03-19 7:50 ` Ander Conselvan De Oliveira
2015-03-19 21:08 ` [PATCH 03/19] " Konduru, Chandra
2015-03-20 7:00 ` Ander Conselvan De Oliveira
2015-03-22 16:28 ` Konduru, Chandra
2015-03-13 9:48 ` [PATCH 04/19] drm/i915: Allocate a crtc_state also when the crtc is being disabled Ander Conselvan de Oliveira
[not found] ` <76A9B330A4D78C4D99CB292C4CC06C0E36F7B41B@fmsmsx101.amr.corp.intel.com>
2015-03-19 7:52 ` Ander Conselvan De Oliveira
2015-03-19 23:23 ` Konduru, Chandra
2015-03-20 8:40 ` Ander Conselvan De Oliveira
2015-03-20 9:51 ` Daniel Vetter
2015-03-20 10:06 ` Ander Conselvan De Oliveira
2015-03-20 10:39 ` Daniel Vetter
2015-03-22 16:46 ` Konduru, Chandra
2015-03-13 9:48 ` [PATCH 05/19] drm/i915: Update dummy connector atomic state with current config Ander Conselvan de Oliveira
2015-03-19 20:55 ` Konduru, Chandra
2015-03-20 6:41 ` Ander Conselvan De Oliveira
2015-03-13 9:48 ` [PATCH 06/19] drm/i915: Implement connector state duplication Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 07/19] drm/i915: Copy the staged connector config to the legacy atomic state Ander Conselvan de Oliveira
[not found] ` <76A9B330A4D78C4D99CB292C4CC06C0E36F7B6F0@fmsmsx101.amr.corp.intel.com>
2015-03-19 7:52 ` Ander Conselvan De Oliveira
2015-03-19 15:15 ` Daniel Vetter
2015-03-13 9:48 ` [PATCH 08/19] drm/i915: Don't use encoder->new_crtc in intel_modeset_pipe_config() Ander Conselvan de Oliveira
2015-03-19 0:44 ` Konduru, Chandra
2015-03-19 7:52 ` Ander Conselvan De Oliveira
2015-03-13 9:48 ` [PATCH 09/19] drm/i915: Don't use encoder->new_crtc in compute_baseline_pipe_bpp() Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 10/19] drm/i915: Don't depend on encoder->new_crtc in intel_dp_compute_config() Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 11/19] drm/i915: Don't depend on encoder->new_crtc in intel_hdmi_compute_config Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 12/19] drm/i915: Use atomic state in intel_ddi_crtc_get_new_encoder() Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 13/19] drm/i915: Don't use staged config in intel_dp_mst_compute_config() Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 14/19] drm/i915: Don't use encoder->new_crtc in intel_lvds_compute_config() Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 15/19] drm/i915: Pass an atomic state to modeset_global_resources() functions Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 16/19] drm/i915: Check lane sharing between pipes B & C using atomic state Ander Conselvan de Oliveira
2015-03-19 20:58 ` Konduru, Chandra
2015-03-20 6:46 ` Conselvan De Oliveira, Ander
2015-03-22 16:20 ` Konduru, Chandra
2015-03-23 7:33 ` Ander Conselvan De Oliveira
2015-03-23 16:57 ` Konduru, Chandra
2015-03-13 9:49 ` Ander Conselvan de Oliveira [this message]
2015-03-19 19:24 ` [PATCH 17/19] drm/i915: Convert intel_pipe_will_have_type() to " Konduru, Chandra
2015-03-20 6:28 ` Ander Conselvan De Oliveira
2015-03-22 16:14 ` Konduru, Chandra
2015-03-13 9:49 ` [PATCH 18/19] drm/i915: Don't look at staged config crtc when changing DRRS state Ander Conselvan de Oliveira
2015-03-13 9:49 ` [PATCH 19/19] drm/i915: Remove usage of encoder->new_crtc from clock computations Ander Conselvan de Oliveira
2015-03-14 0:29 ` shuang.he
2015-03-19 20:39 ` Konduru, Chandra
2015-03-18 23:57 ` [PATCH v2 00/19] Remove depencies on staged config for atomic transition Konduru, Chandra
2015-03-19 15:20 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426240142-24538-18-git-send-email-ander.conselvan.de.oliveira@intel.com \
--to=ander.conselvan.de.oliveira@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.