From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 6/7] ARM: bcm283x: merge BCM2835/BCM2836 directories into mach-bcm283x
Date: Tue, 17 Mar 2015 12:35:12 +0900 [thread overview]
Message-ID: <1426563315-31414-7-git-send-email-yamada.masahiro@socionext.com> (raw)
In-Reply-To: <1426563315-31414-1-git-send-email-yamada.masahiro@socionext.com>
BCM2835 (used on Raspberry Pi) and BCM2836 (used on Raspberry Pi 2)
are similar enough. One of the biggest differences is the ARM
processor. It is reasonable to collect the source files into a
single place, arch/arm/mach-bcm283x/.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Stephen Warren <swarren@nvidia.com>
---
Changes in v2: None
arch/arm/Kconfig | 15 +++-----
arch/arm/Makefile | 1 +
arch/arm/cpu/arm1176/Makefile | 2 --
arch/arm/cpu/arm1176/bcm2835/Kconfig | 12 -------
arch/arm/cpu/armv7/Makefile | 1 -
arch/arm/cpu/armv7/bcm2835/Makefile | 13 -------
arch/arm/mach-bcm283x/Kconfig | 40 ++++++++++++++++++++++
.../{cpu/arm1176/bcm2835 => mach-bcm283x}/Makefile | 2 +-
.../{cpu/arm1176/bcm2835 => mach-bcm283x}/init.c | 0
.../bcm2835 => mach-bcm283x}/lowlevel_init.S | 0
.../{cpu/arm1176/bcm2835 => mach-bcm283x}/mbox.c | 0
.../{cpu/arm1176/bcm2835 => mach-bcm283x}/reset.c | 0
.../{cpu/arm1176/bcm2835 => mach-bcm283x}/timer.c | 0
board/raspberrypi/rpi/Kconfig | 15 --------
board/raspberrypi/rpi_2/Kconfig | 15 --------
configs/rpi_2_defconfig | 1 +
configs/rpi_defconfig | 1 +
17 files changed, 48 insertions(+), 70 deletions(-)
delete mode 100644 arch/arm/cpu/arm1176/bcm2835/Kconfig
delete mode 100644 arch/arm/cpu/armv7/bcm2835/Makefile
create mode 100644 arch/arm/mach-bcm283x/Kconfig
rename arch/arm/{cpu/arm1176/bcm2835 => mach-bcm283x}/Makefile (72%)
rename arch/arm/{cpu/arm1176/bcm2835 => mach-bcm283x}/init.c (100%)
rename arch/arm/{cpu/arm1176/bcm2835 => mach-bcm283x}/lowlevel_init.S (100%)
rename arch/arm/{cpu/arm1176/bcm2835 => mach-bcm283x}/mbox.c (100%)
rename arch/arm/{cpu/arm1176/bcm2835 => mach-bcm283x}/reset.c (100%)
rename arch/arm/{cpu/arm1176/bcm2835 => mach-bcm283x}/timer.c (100%)
delete mode 100644 board/raspberrypi/rpi/Kconfig
delete mode 100644 board/raspberrypi/rpi_2/Kconfig
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b9ebee1..9292e98 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -286,13 +286,8 @@ config TARGET_MX35PDK
bool "Support mx35pdk"
select CPU_ARM1136
-config TARGET_RPI
- bool "Support rpi"
- select CPU_ARM1176
-
-config TARGET_RPI_2
- bool "Support rpi_2"
- select CPU_V7
+config ARCH_BCM283X
+ bool "Broadcom BCM283X family"
config TARGET_INTEGRATORAP_CM946ES
bool "Support integratorap_cm946es"
@@ -723,9 +718,9 @@ endchoice
source "arch/arm/mach-at91/Kconfig"
-source "arch/arm/mach-davinci/Kconfig"
+source "arch/arm/mach-bcm283x/Kconfig"
-source "arch/arm/cpu/arm1176/bcm2835/Kconfig"
+source "arch/arm/mach-davinci/Kconfig"
source "arch/arm/cpu/armv7/exynos/Kconfig"
@@ -834,8 +829,6 @@ source "board/palmtreo680/Kconfig"
source "board/phytec/pcm051/Kconfig"
source "board/ppcag/bg0900/Kconfig"
source "board/pxa255_idp/Kconfig"
-source "board/raspberrypi/rpi/Kconfig"
-source "board/raspberrypi/rpi_2/Kconfig"
source "board/samsung/smdk2410/Kconfig"
source "board/sandisk/sansa_fuze_plus/Kconfig"
source "board/scb9328/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 08946de..bac3cb2 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -5,6 +5,7 @@
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AT91) += at91
+machine-$(CONFIG_ARCH_BCM283X) += bcm283x
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
diff --git a/arch/arm/cpu/arm1176/Makefile b/arch/arm/cpu/arm1176/Makefile
index 480e130..deec427 100644
--- a/arch/arm/cpu/arm1176/Makefile
+++ b/arch/arm/cpu/arm1176/Makefile
@@ -10,5 +10,3 @@
extra-y = start.o
obj-y = cpu.o
-
-obj-$(CONFIG_BCM2835) += bcm2835/
diff --git a/arch/arm/cpu/arm1176/bcm2835/Kconfig b/arch/arm/cpu/arm1176/bcm2835/Kconfig
deleted file mode 100644
index 73cc72b..0000000
--- a/arch/arm/cpu/arm1176/bcm2835/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_RPI || TARGET_RPI_2
-
-config DM
- default y
-
-config DM_SERIAL
- default y
-
-config DM_GPIO
- default y
-
-endif
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 1312a9d..21fc03b 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -39,7 +39,6 @@ endif
obj-$(if $(filter am33xx,$(SOC)),y) += am33xx/
obj-$(if $(filter armada-xp,$(SOC)),y) += armada-xp/
-obj-$(CONFIG_BCM2835) += bcm2835/
obj-$(if $(filter bcm281xx,$(SOC)),y) += bcm281xx/
obj-$(if $(filter bcmcygnus,$(SOC)),y) += bcmcygnus/
obj-$(if $(filter bcmnsp,$(SOC)),y) += bcmnsp/
diff --git a/arch/arm/cpu/armv7/bcm2835/Makefile b/arch/arm/cpu/armv7/bcm2835/Makefile
deleted file mode 100644
index ed1ee47..0000000
--- a/arch/arm/cpu/armv7/bcm2835/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2012 Stephen Warren
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-src_dir := ../../arm1176/bcm2835/
-
-obj-y :=
-obj-y += $(src_dir)/init.o
-obj-y += $(src_dir)/reset.o
-obj-y += $(src_dir)/timer.o
-obj-y += $(src_dir)/mbox.o
diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
new file mode 100644
index 0000000..d5e09e8
--- /dev/null
+++ b/arch/arm/mach-bcm283x/Kconfig
@@ -0,0 +1,40 @@
+menu "Broadcom BCM283X family"
+ depends on ARCH_BCM283X
+
+choice
+ prompt "Broadcom BCM283X board select"
+
+config TARGET_RPI
+ bool "Raspberry Pi"
+ select CPU_ARM1176
+
+config TARGET_RPI_2
+ bool "Raspberry Pi 2"
+ select CPU_V7
+
+endchoice
+
+config DM
+ default y
+
+config DM_SERIAL
+ default y
+
+config DM_GPIO
+ default y
+
+config SYS_BOARD
+ default "rpi" if TARGET_RPI
+ default "rpi_2" if TARGET_RPI_2
+
+config SYS_VENDOR
+ default "raspberrypi"
+
+config SYS_SOC
+ default "bcm2835"
+
+config SYS_CONFIG_NAME
+ default "rpi" if TARGET_RPI
+ default "rpi_2" if TARGET_RPI_2
+
+endmenu
diff --git a/arch/arm/cpu/arm1176/bcm2835/Makefile b/arch/arm/mach-bcm283x/Makefile
similarity index 72%
rename from arch/arm/cpu/arm1176/bcm2835/Makefile
rename to arch/arm/mach-bcm283x/Makefile
index 7e5dbe1..2505428 100644
--- a/arch/arm/cpu/arm1176/bcm2835/Makefile
+++ b/arch/arm/mach-bcm283x/Makefile
@@ -4,5 +4,5 @@
# SPDX-License-Identifier: GPL-2.0
#
-obj-y := lowlevel_init.o
+obj-$(CONFIG_TARGET_RPI) += lowlevel_init.o
obj-y += init.o reset.o timer.o mbox.o
diff --git a/arch/arm/cpu/arm1176/bcm2835/init.c b/arch/arm/mach-bcm283x/init.c
similarity index 100%
rename from arch/arm/cpu/arm1176/bcm2835/init.c
rename to arch/arm/mach-bcm283x/init.c
diff --git a/arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S b/arch/arm/mach-bcm283x/lowlevel_init.S
similarity index 100%
rename from arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S
rename to arch/arm/mach-bcm283x/lowlevel_init.S
diff --git a/arch/arm/cpu/arm1176/bcm2835/mbox.c b/arch/arm/mach-bcm283x/mbox.c
similarity index 100%
rename from arch/arm/cpu/arm1176/bcm2835/mbox.c
rename to arch/arm/mach-bcm283x/mbox.c
diff --git a/arch/arm/cpu/arm1176/bcm2835/reset.c b/arch/arm/mach-bcm283x/reset.c
similarity index 100%
rename from arch/arm/cpu/arm1176/bcm2835/reset.c
rename to arch/arm/mach-bcm283x/reset.c
diff --git a/arch/arm/cpu/arm1176/bcm2835/timer.c b/arch/arm/mach-bcm283x/timer.c
similarity index 100%
rename from arch/arm/cpu/arm1176/bcm2835/timer.c
rename to arch/arm/mach-bcm283x/timer.c
diff --git a/board/raspberrypi/rpi/Kconfig b/board/raspberrypi/rpi/Kconfig
deleted file mode 100644
index 6a538cf..0000000
--- a/board/raspberrypi/rpi/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_RPI
-
-config SYS_BOARD
- default "rpi"
-
-config SYS_VENDOR
- default "raspberrypi"
-
-config SYS_SOC
- default "bcm2835"
-
-config SYS_CONFIG_NAME
- default "rpi"
-
-endif
diff --git a/board/raspberrypi/rpi_2/Kconfig b/board/raspberrypi/rpi_2/Kconfig
deleted file mode 100644
index 032184d..0000000
--- a/board/raspberrypi/rpi_2/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_RPI_2
-
-config SYS_BOARD
- default "rpi_2"
-
-config SYS_VENDOR
- default "raspberrypi"
-
-config SYS_SOC
- default "bcm2835"
-
-config SYS_CONFIG_NAME
- default "rpi_2"
-
-endif
diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
index 3075321..965fcae 100644
--- a/configs/rpi_2_defconfig
+++ b/configs/rpi_2_defconfig
@@ -1,2 +1,3 @@
CONFIG_ARM=y
+CONFIG_ARCH_BCM283X=y
CONFIG_TARGET_RPI_2=y
diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
index 9379cf0..8de1d9f 100644
--- a/configs/rpi_defconfig
+++ b/configs/rpi_defconfig
@@ -1,2 +1,3 @@
CONFIG_ARM=y
+CONFIG_ARCH_BCM283X=y
CONFIG_TARGET_RPI=y
--
1.9.1
next prev parent reply other threads:[~2015-03-17 3:35 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-17 3:35 [U-Boot] [PATCH v2 0/7] Some improvements related to build system Masahiro Yamada
2015-03-17 3:35 ` [U-Boot] [PATCH v2 1/7] generic-board: move __HAVE_ARCH_GENERIC_BOARD to Kconfig Masahiro Yamada
2015-03-17 3:35 ` [U-Boot] [PATCH v2 2/7] generic-board: select SYS_GENERIC_BOARD for some architectures Masahiro Yamada
2015-03-17 3:35 ` [U-Boot] [PATCH v2 3/7] m68k: remove arch/m68k/lib/board.c Masahiro Yamada
2015-03-17 6:55 ` Angelo Dureghello
2015-03-25 3:20 ` Masahiro Yamada
2015-03-25 12:12 ` Angelo Dureghello
2015-04-08 19:20 ` Angelo Dureghello
2015-04-09 10:07 ` Masahiro Yamada
2015-03-17 3:35 ` [U-Boot] [PATCH v2 4/7] malloc_f: remove redundant defalut values of CONFIG_SYS_MALLOC_F_LEN Masahiro Yamada
2015-03-17 3:35 ` [U-Boot] [PATCH v2 5/7] malloc_f: enable SYS_MALLOC_F by default if DM is on Masahiro Yamada
2015-03-17 3:35 ` Masahiro Yamada [this message]
2015-03-17 3:35 ` [U-Boot] [PATCH v2 7/7] ARM: bcm283x: move SoC headers to mach-bcm283x/include/mach Masahiro Yamada
2015-03-19 10:36 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426563315-31414-7-git-send-email-yamada.masahiro@socionext.com \
--to=yamada.masahiro@socionext.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.