* [PATCH v8]: clk: Add common clock support for Mediatek MT8135 and MT8173
@ 2015-03-19 8:42 ` Sascha Hauer
0 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 9eccca0843205f87c00404b663188b88eb248051:
Linux 4.0-rc3 (2015-03-08 16:09:09 -0700)
are available in the git repository at:
git://git.pengutronix.de/git/imx/linux-2.6.git tags/v4.0-clk-mediatek-v8
for you to fetch changes up to 54449c74078c9d93619757c7a91b820eaa28c0f4:
dt-bindings: ARM: Mediatek: Document devicetree bindings for clock/reset controllers (2015-03-19 09:15:33 +0100)
----------------------------------------------------------------
This patchset contains the initial common clock support for Mediatek SoCs.
Mediatek SoC's clock architecture comprises of various PLLs, dividers, muxes
and clock gates.
Changes in v8:
- add patch to allow to put parent_name arrays in __initconst
- put parent_name arrays into __initconst
Changes in v7:
- fix duplicate definition/declaration of mtk_register_reset_controller
- fix pd_reg offset of tvdpll
- make clk initialization arrays const
Changes in v6:
- rework PLL support, only a fraction of original size now
- Move binding docs to Documentation/devicetree/bindings/arm/mediatek since
the units are not really clock specific (they contain reset controllers)
Changes in v5:
- Add reset controller support for pericfg/infracfg
- Use regmap for the gates
- remove now unnecessary spinlock for the gates
- Add PMIC wrapper support as of v3
Changes in v4:
- Support MT8173 platform.
- Re-ordered patchset. driver/clk/Makefile in 2nd patch.
- Extract the common part definition(mtk_gate/mtk_pll/mtk_mux) from
clk-mt8135.c/clk-mt8173.c to clk-mtk.c.
- Refine code. Rmove unnessacary debug information and unsed defines,
add prefix "mtk_" for static functions.
- Remove flag CLK_IGNORE_UNUSED and set flag CLK_SET_RATE_PARENT on
gate/mux/fixed-factor.
- Use spin_lock_irqsave(&clk_ops_lock, flags) instead of mtk_clk_lock.
- Example above include a node for the clock controller itself, followed
by the i2c controller example above.
Changes in v3:
- Rebase to 3.19-rc1.
- Refine code. Remove unneed functions, debug logs and comments, and fine tune
error logs.
Changes in v2:
- Re-ordered patchset. Fold include/dt-bindings and DT document in 1st patch.
----------------------------------------------------------------
James Liao (3):
clk: mediatek: Add initial common clock support for Mediatek SoCs.
clk: mediatek: Add basic clocks for Mediatek MT8135.
clk: mediatek: Add basic clocks for Mediatek MT8173.
Sascha Hauer (3):
clk: make strings in parent name arrays const
clk: mediatek: Add reset controller support
dt-bindings: ARM: Mediatek: Document devicetree bindings for clock/reset controllers
.../bindings/arm/mediatek/mediatek,apmixedsys.txt | 23 +
.../bindings/arm/mediatek/mediatek,infracfg.txt | 30 +
.../bindings/arm/mediatek/mediatek,pericfg.txt | 30 +
.../bindings/arm/mediatek/mediatek,topckgen.txt | 23 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-composite.c | 2 +-
drivers/clk/clk-mux.c | 4 +-
drivers/clk/mediatek/Makefile | 4 +
drivers/clk/mediatek/clk-gate.c | 137 ++++
drivers/clk/mediatek/clk-gate.h | 49 ++
drivers/clk/mediatek/clk-mt8135.c | 640 ++++++++++++++++
drivers/clk/mediatek/clk-mt8173.c | 826 +++++++++++++++++++++
drivers/clk/mediatek/clk-mtk.c | 197 +++++
drivers/clk/mediatek/clk-mtk.h | 165 ++++
drivers/clk/mediatek/clk-pll.c | 325 ++++++++
drivers/clk/mediatek/reset.c | 99 +++
include/dt-bindings/clock/mt8135-clk.h | 190 +++++
include/dt-bindings/clock/mt8173-clk.h | 231 ++++++
.../dt-bindings/reset-controller/mt8135-resets.h | 64 ++
.../dt-bindings/reset-controller/mt8173-resets.h | 63 ++
include/linux/clk-provider.h | 8 +-
21 files changed, 3104 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
create mode 100644 drivers/clk/mediatek/Makefile
create mode 100644 drivers/clk/mediatek/clk-gate.c
create mode 100644 drivers/clk/mediatek/clk-gate.h
create mode 100644 drivers/clk/mediatek/clk-mt8135.c
create mode 100644 drivers/clk/mediatek/clk-mt8173.c
create mode 100644 drivers/clk/mediatek/clk-mtk.c
create mode 100644 drivers/clk/mediatek/clk-mtk.h
create mode 100644 drivers/clk/mediatek/clk-pll.c
create mode 100644 drivers/clk/mediatek/reset.c
create mode 100644 include/dt-bindings/clock/mt8135-clk.h
create mode 100644 include/dt-bindings/clock/mt8173-clk.h
create mode 100644 include/dt-bindings/reset-controller/mt8135-resets.h
create mode 100644 include/dt-bindings/reset-controller/mt8173-resets.h
^ permalink raw reply [flat|nested] 53+ messages in thread* [PATCH v8]: clk: Add common clock support for Mediatek MT8135 and MT8173
@ 2015-03-19 8:42 ` Sascha Hauer
0 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: Mike Turquette
Cc: Stephen Boyd, YH Chen, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
Henry Chen, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ, Matthias Brugger, Yingjoe Chen,
Eddie Huang, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
The following changes since commit 9eccca0843205f87c00404b663188b88eb248051:
Linux 4.0-rc3 (2015-03-08 16:09:09 -0700)
are available in the git repository at:
git://git.pengutronix.de/git/imx/linux-2.6.git tags/v4.0-clk-mediatek-v8
for you to fetch changes up to 54449c74078c9d93619757c7a91b820eaa28c0f4:
dt-bindings: ARM: Mediatek: Document devicetree bindings for clock/reset controllers (2015-03-19 09:15:33 +0100)
----------------------------------------------------------------
This patchset contains the initial common clock support for Mediatek SoCs.
Mediatek SoC's clock architecture comprises of various PLLs, dividers, muxes
and clock gates.
Changes in v8:
- add patch to allow to put parent_name arrays in __initconst
- put parent_name arrays into __initconst
Changes in v7:
- fix duplicate definition/declaration of mtk_register_reset_controller
- fix pd_reg offset of tvdpll
- make clk initialization arrays const
Changes in v6:
- rework PLL support, only a fraction of original size now
- Move binding docs to Documentation/devicetree/bindings/arm/mediatek since
the units are not really clock specific (they contain reset controllers)
Changes in v5:
- Add reset controller support for pericfg/infracfg
- Use regmap for the gates
- remove now unnecessary spinlock for the gates
- Add PMIC wrapper support as of v3
Changes in v4:
- Support MT8173 platform.
- Re-ordered patchset. driver/clk/Makefile in 2nd patch.
- Extract the common part definition(mtk_gate/mtk_pll/mtk_mux) from
clk-mt8135.c/clk-mt8173.c to clk-mtk.c.
- Refine code. Rmove unnessacary debug information and unsed defines,
add prefix "mtk_" for static functions.
- Remove flag CLK_IGNORE_UNUSED and set flag CLK_SET_RATE_PARENT on
gate/mux/fixed-factor.
- Use spin_lock_irqsave(&clk_ops_lock, flags) instead of mtk_clk_lock.
- Example above include a node for the clock controller itself, followed
by the i2c controller example above.
Changes in v3:
- Rebase to 3.19-rc1.
- Refine code. Remove unneed functions, debug logs and comments, and fine tune
error logs.
Changes in v2:
- Re-ordered patchset. Fold include/dt-bindings and DT document in 1st patch.
----------------------------------------------------------------
James Liao (3):
clk: mediatek: Add initial common clock support for Mediatek SoCs.
clk: mediatek: Add basic clocks for Mediatek MT8135.
clk: mediatek: Add basic clocks for Mediatek MT8173.
Sascha Hauer (3):
clk: make strings in parent name arrays const
clk: mediatek: Add reset controller support
dt-bindings: ARM: Mediatek: Document devicetree bindings for clock/reset controllers
.../bindings/arm/mediatek/mediatek,apmixedsys.txt | 23 +
.../bindings/arm/mediatek/mediatek,infracfg.txt | 30 +
.../bindings/arm/mediatek/mediatek,pericfg.txt | 30 +
.../bindings/arm/mediatek/mediatek,topckgen.txt | 23 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-composite.c | 2 +-
drivers/clk/clk-mux.c | 4 +-
drivers/clk/mediatek/Makefile | 4 +
drivers/clk/mediatek/clk-gate.c | 137 ++++
drivers/clk/mediatek/clk-gate.h | 49 ++
drivers/clk/mediatek/clk-mt8135.c | 640 ++++++++++++++++
drivers/clk/mediatek/clk-mt8173.c | 826 +++++++++++++++++++++
drivers/clk/mediatek/clk-mtk.c | 197 +++++
drivers/clk/mediatek/clk-mtk.h | 165 ++++
drivers/clk/mediatek/clk-pll.c | 325 ++++++++
drivers/clk/mediatek/reset.c | 99 +++
include/dt-bindings/clock/mt8135-clk.h | 190 +++++
include/dt-bindings/clock/mt8173-clk.h | 231 ++++++
.../dt-bindings/reset-controller/mt8135-resets.h | 64 ++
.../dt-bindings/reset-controller/mt8173-resets.h | 63 ++
include/linux/clk-provider.h | 8 +-
21 files changed, 3104 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
create mode 100644 drivers/clk/mediatek/Makefile
create mode 100644 drivers/clk/mediatek/clk-gate.c
create mode 100644 drivers/clk/mediatek/clk-gate.h
create mode 100644 drivers/clk/mediatek/clk-mt8135.c
create mode 100644 drivers/clk/mediatek/clk-mt8173.c
create mode 100644 drivers/clk/mediatek/clk-mtk.c
create mode 100644 drivers/clk/mediatek/clk-mtk.h
create mode 100644 drivers/clk/mediatek/clk-pll.c
create mode 100644 drivers/clk/mediatek/reset.c
create mode 100644 include/dt-bindings/clock/mt8135-clk.h
create mode 100644 include/dt-bindings/clock/mt8173-clk.h
create mode 100644 include/dt-bindings/reset-controller/mt8135-resets.h
create mode 100644 include/dt-bindings/reset-controller/mt8173-resets.h
^ permalink raw reply [flat|nested] 53+ messages in thread* [PATCH 1/6] clk: make strings in parent name arrays const
2015-03-19 8:42 ` Sascha Hauer
@ 2015-03-19 8:42 ` Sascha Hauer
-1 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: Mike Turquette
Cc: Stephen Boyd, YH Chen, linux-kernel, Henry Chen, linux-mediatek,
kernel, Matthias Brugger, Yingjoe Chen, Eddie Huang,
linux-arm-kernel, Sascha Hauer
The clk functions and structs declare the parent_name arrays as
'const char **parent_names' which means the parent name strings
are const, but the array itself is not. Use
'const char * const * parent_names' instead which also makes
the array const. This allows us to put the parent_name arrays into
the __initconst section.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/clk/clk-composite.c | 2 +-
drivers/clk/clk-mux.c | 4 ++--
include/linux/clk-provider.h | 8 ++++----
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c
index 956b7e5..077f4c714 100644
--- a/drivers/clk/clk-composite.c
+++ b/drivers/clk/clk-composite.c
@@ -188,7 +188,7 @@ static void clk_composite_disable(struct clk_hw *hw)
}
struct clk *clk_register_composite(struct device *dev, const char *name,
- const char **parent_names, int num_parents,
+ const char * const *parent_names, int num_parents,
struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 69a094c..1fa2a8d 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -114,7 +114,7 @@ const struct clk_ops clk_mux_ro_ops = {
EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
struct clk *clk_register_mux_table(struct device *dev, const char *name,
- const char **parent_names, u8 num_parents, unsigned long flags,
+ const char * const *parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u32 mask,
u8 clk_mux_flags, u32 *table, spinlock_t *lock)
{
@@ -166,7 +166,7 @@ struct clk *clk_register_mux_table(struct device *dev, const char *name,
EXPORT_SYMBOL_GPL(clk_register_mux_table);
struct clk *clk_register_mux(struct device *dev, const char *name,
- const char **parent_names, u8 num_parents, unsigned long flags,
+ const char * const *parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_mux_flags, spinlock_t *lock)
{
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 5591ea7..410684d 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -209,7 +209,7 @@ struct clk_ops {
struct clk_init_data {
const char *name;
const struct clk_ops *ops;
- const char **parent_names;
+ const char * const *parent_names;
u8 num_parents;
unsigned long flags;
};
@@ -426,12 +426,12 @@ extern const struct clk_ops clk_mux_ops;
extern const struct clk_ops clk_mux_ro_ops;
struct clk *clk_register_mux(struct device *dev, const char *name,
- const char **parent_names, u8 num_parents, unsigned long flags,
+ const char * const *parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_mux_flags, spinlock_t *lock);
struct clk *clk_register_mux_table(struct device *dev, const char *name,
- const char **parent_names, u8 num_parents, unsigned long flags,
+ const char * const *parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u32 mask,
u8 clk_mux_flags, u32 *table, spinlock_t *lock);
@@ -518,7 +518,7 @@ struct clk_composite {
};
struct clk *clk_register_composite(struct device *dev, const char *name,
- const char **parent_names, int num_parents,
+ const char * const *parent_names, int num_parents,
struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
--
2.1.4
^ permalink raw reply related [flat|nested] 53+ messages in thread* [PATCH 1/6] clk: make strings in parent name arrays const
@ 2015-03-19 8:42 ` Sascha Hauer
0 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: linux-arm-kernel
The clk functions and structs declare the parent_name arrays as
'const char **parent_names' which means the parent name strings
are const, but the array itself is not. Use
'const char * const * parent_names' instead which also makes
the array const. This allows us to put the parent_name arrays into
the __initconst section.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/clk/clk-composite.c | 2 +-
drivers/clk/clk-mux.c | 4 ++--
include/linux/clk-provider.h | 8 ++++----
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c
index 956b7e5..077f4c714 100644
--- a/drivers/clk/clk-composite.c
+++ b/drivers/clk/clk-composite.c
@@ -188,7 +188,7 @@ static void clk_composite_disable(struct clk_hw *hw)
}
struct clk *clk_register_composite(struct device *dev, const char *name,
- const char **parent_names, int num_parents,
+ const char * const *parent_names, int num_parents,
struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 69a094c..1fa2a8d 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -114,7 +114,7 @@ const struct clk_ops clk_mux_ro_ops = {
EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
struct clk *clk_register_mux_table(struct device *dev, const char *name,
- const char **parent_names, u8 num_parents, unsigned long flags,
+ const char * const *parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u32 mask,
u8 clk_mux_flags, u32 *table, spinlock_t *lock)
{
@@ -166,7 +166,7 @@ struct clk *clk_register_mux_table(struct device *dev, const char *name,
EXPORT_SYMBOL_GPL(clk_register_mux_table);
struct clk *clk_register_mux(struct device *dev, const char *name,
- const char **parent_names, u8 num_parents, unsigned long flags,
+ const char * const *parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_mux_flags, spinlock_t *lock)
{
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 5591ea7..410684d 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -209,7 +209,7 @@ struct clk_ops {
struct clk_init_data {
const char *name;
const struct clk_ops *ops;
- const char **parent_names;
+ const char * const *parent_names;
u8 num_parents;
unsigned long flags;
};
@@ -426,12 +426,12 @@ extern const struct clk_ops clk_mux_ops;
extern const struct clk_ops clk_mux_ro_ops;
struct clk *clk_register_mux(struct device *dev, const char *name,
- const char **parent_names, u8 num_parents, unsigned long flags,
+ const char * const *parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_mux_flags, spinlock_t *lock);
struct clk *clk_register_mux_table(struct device *dev, const char *name,
- const char **parent_names, u8 num_parents, unsigned long flags,
+ const char * const *parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u32 mask,
u8 clk_mux_flags, u32 *table, spinlock_t *lock);
@@ -518,7 +518,7 @@ struct clk_composite {
};
struct clk *clk_register_composite(struct device *dev, const char *name,
- const char **parent_names, int num_parents,
+ const char * const *parent_names, int num_parents,
struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
--
2.1.4
^ permalink raw reply related [flat|nested] 53+ messages in thread* Re: [PATCH 1/6] clk: make strings in parent name arrays const
2015-03-19 8:42 ` Sascha Hauer
@ 2015-03-19 8:48 ` Uwe Kleine-König
-1 siblings, 0 replies; 53+ messages in thread
From: Uwe Kleine-König @ 2015-03-19 8:48 UTC (permalink / raw)
To: Sascha Hauer
Cc: Mike Turquette, Stephen Boyd, YH Chen, linux-kernel, Henry Chen,
linux-mediatek, kernel, Matthias Brugger, Yingjoe Chen,
Eddie Huang, linux-arm-kernel
Hello,
On Thu, Mar 19, 2015 at 09:42:05AM +0100, Sascha Hauer wrote:
> The clk functions and structs declare the parent_name arrays as
> 'const char **parent_names' which means the parent name strings
> are const, but the array itself is not. Use
> 'const char * const * parent_names' instead which also makes
> the array const. This allows us to put the parent_name arrays into
> the __initconst section.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
looks sensible:
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
It would be nice to have this for more clock types (which of course
shouldn't delay this patch).
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 53+ messages in thread
* [PATCH 1/6] clk: make strings in parent name arrays const
@ 2015-03-19 8:48 ` Uwe Kleine-König
0 siblings, 0 replies; 53+ messages in thread
From: Uwe Kleine-König @ 2015-03-19 8:48 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
On Thu, Mar 19, 2015 at 09:42:05AM +0100, Sascha Hauer wrote:
> The clk functions and structs declare the parent_name arrays as
> 'const char **parent_names' which means the parent name strings
> are const, but the array itself is not. Use
> 'const char * const * parent_names' instead which also makes
> the array const. This allows us to put the parent_name arrays into
> the __initconst section.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
looks sensible:
Acked-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
It would be nice to have this for more clock types (which of course
shouldn't delay this patch).
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 53+ messages in thread
* [PATCH 2/6] clk: mediatek: Add initial common clock support for Mediatek SoCs.
@ 2015-03-19 8:42 ` Sascha Hauer
0 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: Mike Turquette
Cc: Stephen Boyd, YH Chen, linux-kernel, Henry Chen, linux-mediatek,
kernel, Matthias Brugger, Yingjoe Chen, Eddie Huang,
linux-arm-kernel, James Liao, Sascha Hauer
From: James Liao <jamesjj.liao@mediatek.com>
This patch adds common clock support for Mediatek SoCs, including plls,
muxes and clock gates.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/clk/Makefile | 1 +
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-gate.c | 137 +++++++++++++++++
drivers/clk/mediatek/clk-gate.h | 49 ++++++
drivers/clk/mediatek/clk-mtk.c | 197 ++++++++++++++++++++++++
drivers/clk/mediatek/clk-mtk.h | 155 +++++++++++++++++++
drivers/clk/mediatek/clk-pll.c | 325 ++++++++++++++++++++++++++++++++++++++++
7 files changed, 865 insertions(+)
create mode 100644 drivers/clk/mediatek/Makefile
create mode 100644 drivers/clk/mediatek/clk-gate.c
create mode 100644 drivers/clk/mediatek/clk-gate.h
create mode 100644 drivers/clk/mediatek/clk-mtk.c
create mode 100644 drivers/clk/mediatek/clk-mtk.h
create mode 100644 drivers/clk/mediatek/clk-pll.c
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d478ceb..6d97203 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/
obj-$(CONFIG_ARCH_HIP04) += hisilicon/
obj-$(CONFIG_ARCH_HIX5HD2) += hisilicon/
obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/
+obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
ifeq ($(CONFIG_COMMON_CLK), y)
obj-$(CONFIG_ARCH_MMP) += mmp/
endif
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
new file mode 100644
index 0000000..c384e97
--- /dev/null
+++ b/drivers/clk/mediatek/Makefile
@@ -0,0 +1 @@
+obj-y += clk-mtk.o clk-pll.o clk-gate.o
diff --git a/drivers/clk/mediatek/clk-gate.c b/drivers/clk/mediatek/clk-gate.c
new file mode 100644
index 0000000..9d77ee3
--- /dev/null
+++ b/drivers/clk/mediatek/clk-gate.c
@@ -0,0 +1,137 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/clkdev.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+static int mtk_cg_bit_is_cleared(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_clk_gate(hw);
+ u32 val;
+
+ regmap_read(cg->regmap, cg->sta_ofs, &val);
+
+ val &= BIT(cg->bit);
+
+ return val == 0;
+}
+
+static int mtk_cg_bit_is_set(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_clk_gate(hw);
+ u32 val;
+
+ regmap_read(cg->regmap, cg->sta_ofs, &val);
+
+ val &= BIT(cg->bit);
+
+ return val != 0;
+}
+
+static void mtk_cg_set_bit(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_clk_gate(hw);
+
+ regmap_write(cg->regmap, cg->set_ofs, BIT(cg->bit));
+}
+
+static void mtk_cg_clr_bit(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_clk_gate(hw);
+
+ regmap_write(cg->regmap, cg->clr_ofs, BIT(cg->bit));
+}
+
+static int mtk_cg_enable(struct clk_hw *hw)
+{
+ mtk_cg_clr_bit(hw);
+
+ return 0;
+}
+
+static void mtk_cg_disable(struct clk_hw *hw)
+{
+ mtk_cg_set_bit(hw);
+}
+
+static int mtk_cg_enable_inv(struct clk_hw *hw)
+{
+ mtk_cg_set_bit(hw);
+
+ return 0;
+}
+
+static void mtk_cg_disable_inv(struct clk_hw *hw)
+{
+ mtk_cg_clr_bit(hw);
+}
+
+const struct clk_ops mtk_clk_gate_ops_setclr = {
+ .is_enabled = mtk_cg_bit_is_cleared,
+ .enable = mtk_cg_enable,
+ .disable = mtk_cg_disable,
+};
+
+const struct clk_ops mtk_clk_gate_ops_setclr_inv = {
+ .is_enabled = mtk_cg_bit_is_set,
+ .enable = mtk_cg_enable_inv,
+ .disable = mtk_cg_disable_inv,
+};
+
+struct clk *mtk_clk_register_gate(
+ const char *name,
+ const char *parent_name,
+ struct regmap *regmap,
+ int set_ofs,
+ int clr_ofs,
+ int sta_ofs,
+ u8 bit,
+ const struct clk_ops *ops)
+{
+ struct mtk_clk_gate *cg;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ cg = kzalloc(sizeof(*cg), GFP_KERNEL);
+ if (!cg)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+ init.ops = ops;
+
+ cg->regmap = regmap;
+ cg->set_ofs = set_ofs;
+ cg->clr_ofs = clr_ofs;
+ cg->sta_ofs = sta_ofs;
+ cg->bit = bit;
+
+ cg->hw.init = &init;
+
+ clk = clk_register(NULL, &cg->hw);
+ if (IS_ERR(clk))
+ kfree(cg);
+
+ return clk;
+}
diff --git a/drivers/clk/mediatek/clk-gate.h b/drivers/clk/mediatek/clk-gate.h
new file mode 100644
index 0000000..6b6780b
--- /dev/null
+++ b/drivers/clk/mediatek/clk-gate.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DRV_CLK_GATE_H
+#define __DRV_CLK_GATE_H
+
+#include <linux/regmap.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+struct mtk_clk_gate {
+ struct clk_hw hw;
+ struct regmap *regmap;
+ int set_ofs;
+ int clr_ofs;
+ int sta_ofs;
+ u8 bit;
+};
+
+static inline struct mtk_clk_gate *to_clk_gate(struct clk_hw *hw)
+{
+ return container_of(hw, struct mtk_clk_gate, hw);
+}
+
+extern const struct clk_ops mtk_clk_gate_ops_setclr;
+extern const struct clk_ops mtk_clk_gate_ops_setclr_inv;
+
+struct clk *mtk_clk_register_gate(
+ const char *name,
+ const char *parent_name,
+ struct regmap *regmap,
+ int set_ofs,
+ int clr_ofs,
+ int sta_ofs,
+ u8 bit,
+ const struct clk_ops *ops);
+
+#endif /* __DRV_CLK_GATE_H */
diff --git a/drivers/clk/mediatek/clk-mtk.c b/drivers/clk/mediatek/clk-mtk.c
new file mode 100644
index 0000000..a0c9f43
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mtk.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/clkdev.h>
+#include <linux/mfd/syscon.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+struct clk_onecell_data *mtk_alloc_clk_data(unsigned int clk_num)
+{
+ int i;
+ struct clk_onecell_data *clk_data;
+
+ clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
+ if (!clk_data)
+ return NULL;
+
+ clk_data->clks = kcalloc(clk_num, sizeof(*clk_data->clks), GFP_KERNEL);
+ if (!clk_data->clks)
+ goto err_out;
+
+ clk_data->clk_num = clk_num;
+
+ for (i = 0; i < clk_num; ++i)
+ clk_data->clks[i] = ERR_PTR(-ENOENT);
+
+ return clk_data;
+err_out:
+ kfree(clk_data);
+
+ return NULL;
+}
+
+void mtk_clk_register_factors(const struct mtk_fixed_factor *clks, int num,
+ struct clk_onecell_data *clk_data)
+{
+ int i;
+ struct clk *clk;
+
+ for (i = 0; i < num; i++) {
+ const struct mtk_fixed_factor *ff = &clks[i];
+
+ clk = clk_register_fixed_factor(NULL, ff->name, ff->parent_name,
+ CLK_SET_RATE_PARENT, ff->mult, ff->div);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ ff->name, PTR_ERR(clk));
+ continue;
+ }
+
+ if (clk_data)
+ clk_data->clks[ff->id] = clk;
+ }
+}
+
+int mtk_clk_register_gates(struct device_node *node, const struct mtk_gate *clks,
+ int num, struct clk_onecell_data *clk_data)
+{
+ int i;
+ struct clk *clk;
+ struct regmap *regmap;
+
+ if (!clk_data)
+ return -ENOMEM;
+
+ regmap = syscon_node_to_regmap(node);
+ if (IS_ERR(regmap)) {
+ pr_err("Cannot find regmap for %s: %ld\n", node->full_name,
+ PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ for (i = 0; i < num; i++) {
+ const struct mtk_gate *gate = &clks[i];
+
+ clk = mtk_clk_register_gate(gate->name, gate->parent_name,
+ regmap,
+ gate->regs->set_ofs,
+ gate->regs->clr_ofs,
+ gate->regs->sta_ofs,
+ gate->shift, gate->ops);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ gate->name, PTR_ERR(clk));
+ continue;
+ }
+
+ clk_data->clks[gate->id] = clk;
+ }
+
+ return 0;
+}
+
+struct clk *mtk_clk_register_composite(const struct mtk_composite *mc,
+ void __iomem *base, spinlock_t *lock)
+{
+ struct clk *clk;
+ struct clk_mux *mux = NULL;
+ struct clk_gate *gate = NULL;
+ struct clk_divider *div = NULL;
+ struct clk_hw *mux_hw = NULL, *gate_hw = NULL, *div_hw = NULL;
+ const struct clk_ops *mux_ops = NULL, *gate_ops = NULL, *div_ops = NULL;
+ const char * const *parent_names;
+ const char *parent;
+ int num_parents;
+ int ret;
+
+ if (mc->mux_shift >= 0) {
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return ERR_PTR(-ENOMEM);
+
+ mux->reg = base + mc->mux_reg;
+ mux->mask = BIT(mc->mux_width) - 1;
+ mux->shift = mc->mux_shift;
+ mux->lock = lock;
+
+ mux_hw = &mux->hw;
+ mux_ops = &clk_mux_ops;
+
+ parent_names = mc->parent_names;
+ num_parents = mc->num_parents;
+ } else {
+ parent = mc->parent;
+ parent_names = &parent;
+ num_parents = 1;
+ }
+
+ if (mc->gate_shift >= 0) {
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ gate->reg = base + mc->gate_reg;
+ gate->bit_idx = mc->gate_shift;
+ gate->flags = CLK_GATE_SET_TO_DISABLE;
+ gate->lock = lock;
+
+ gate_hw = &gate->hw;
+ gate_ops = &clk_gate_ops;
+ }
+
+ if (mc->divider_shift >= 0) {
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ div->reg = base + mc->divider_reg;
+ div->shift = mc->divider_shift;
+ div->width = mc->divider_width;
+ div->lock = lock;
+
+ div_hw = &div->hw;
+ div_ops = &clk_divider_ops;
+ }
+
+ clk = clk_register_composite(NULL, mc->name, parent_names, num_parents,
+ mux_hw, mux_ops,
+ div_hw, div_ops,
+ gate_hw, gate_ops,
+ mc->flags);
+
+ if (IS_ERR(clk)) {
+ kfree(gate);
+ kfree(mux);
+ }
+
+ return clk;
+err_out:
+ kfree(mux);
+
+ return ERR_PTR(ret);
+}
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
new file mode 100644
index 0000000..5aaba81
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -0,0 +1,155 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DRV_CLK_MTK_H
+#define __DRV_CLK_MTK_H
+
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+#define MAX_MUX_GATE_BIT 31
+#define INVALID_MUX_GATE_BIT (MAX_MUX_GATE_BIT + 1)
+
+#define MHZ (1000 * 1000)
+
+struct mtk_fixed_factor {
+ int id;
+ const char *name;
+ const char *parent_name;
+ int mult;
+ int div;
+};
+
+#define FACTOR(_id, _name, _parent, _mult, _div) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .mult = _mult, \
+ .div = _div, \
+ }
+
+extern void mtk_clk_register_factors(const struct mtk_fixed_factor *clks,
+ int num, struct clk_onecell_data *clk_data);
+
+struct mtk_composite {
+ int id;
+ const char *name;
+ const char * const * parent_names;
+ const char *parent;
+ unsigned flags;
+
+ uint32_t mux_reg;
+ uint32_t divider_reg;
+ uint32_t gate_reg;
+
+ signed char mux_shift;
+ signed char mux_width;
+ signed char gate_shift;
+
+ signed char divider_shift;
+ signed char divider_width;
+
+ signed char num_parents;
+};
+
+#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) { \
+ .id = _id, \
+ .name = _name, \
+ .mux_reg = _reg, \
+ .mux_shift = _shift, \
+ .mux_width = _width, \
+ .gate_reg = _reg, \
+ .gate_shift = _gate, \
+ .divider_shift = -1, \
+ .parent_names = _parents, \
+ .num_parents = ARRAY_SIZE(_parents), \
+ .flags = CLK_SET_RATE_PARENT, \
+ }
+
+#define MUX(_id, _name, _parents, _reg, _shift, _width) { \
+ .id = _id, \
+ .name = _name, \
+ .mux_reg = _reg, \
+ .mux_shift = _shift, \
+ .mux_width = _width, \
+ .gate_shift = -1, \
+ .divider_shift = -1, \
+ .parent_names = _parents, \
+ .num_parents = ARRAY_SIZE(_parents), \
+ .flags = CLK_SET_RATE_PARENT, \
+ }
+
+#define DIV_GATE(_id, _name, _parent, _gate_reg, _gate_shift, _div_reg, _div_width, _div_shift) { \
+ .id = _id, \
+ .parent = _parent, \
+ .name = _name, \
+ .divider_reg = _div_reg, \
+ .divider_shift = _div_shift, \
+ .divider_width = _div_width, \
+ .gate_reg = _gate_reg, \
+ .gate_shift = _gate_shift, \
+ .mux_shift = -1, \
+ .flags = 0, \
+ }
+
+struct clk *mtk_clk_register_composite(const struct mtk_composite *mc,
+ void __iomem *base, spinlock_t *lock);
+
+struct mtk_gate_regs {
+ u32 sta_ofs;
+ u32 clr_ofs;
+ u32 set_ofs;
+};
+
+struct mtk_gate {
+ int id;
+ const char *name;
+ const char *parent_name;
+ const struct mtk_gate_regs *regs;
+ int shift;
+ const struct clk_ops *ops;
+};
+
+int mtk_clk_register_gates(struct device_node *node, const struct mtk_gate *clks,
+ int num, struct clk_onecell_data *clk_data);
+
+struct clk_onecell_data *mtk_alloc_clk_data(unsigned int clk_num);
+
+#define HAVE_RST_BAR BIT(0)
+
+struct mtk_pll_data {
+ int id;
+ const char *name;
+ uint32_t reg;
+ uint32_t pwr_reg;
+ uint32_t en_mask;
+ uint32_t pd_reg;
+ uint32_t tuner_reg;
+ int pd_shift;
+ unsigned int flags;
+ const struct clk_ops *ops;
+ u32 rst_bar_mask;
+ unsigned long fmax;
+ int pcwbits;
+ uint32_t pcw_reg;
+ int pcw_shift;
+};
+
+void __init mtk_clk_register_plls(struct device_node *node,
+ const struct mtk_pll_data *plls, int num_plls,
+ struct clk_onecell_data *clk_data);
+
+#endif /* __DRV_CLK_MTK_H */
diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
new file mode 100644
index 0000000..5589e45
--- /dev/null
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -0,0 +1,325 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
+
+#include "clk-mtk.h"
+
+#define CON0_BASE_EN BIT(0)
+#define CON0_PWR_ON BIT(0)
+#define CON0_ISO_EN BIT(1)
+#define CON0_PCW_CHG BIT(31)
+
+#define AUDPLL_TUNER_EN BIT(31)
+
+/*
+ * MediaTek PLLs are configured through their pcw value. The pcw value describes
+ * a divider in the PLL feedback loop which consists of 7 bits for the integer
+ * part and the remaining bits (if present) for the fractional part. Also they
+ * have a 3 bit power-of-two post divider.
+ */
+
+struct mtk_clk_pll {
+ struct clk_hw hw;
+ void __iomem *base_addr;
+ void __iomem *pd_addr;
+ void __iomem *pwr_addr;
+ void __iomem *tuner_addr;
+ void __iomem *pcw_addr;
+ const struct mtk_pll_data *data;
+};
+
+static inline struct mtk_clk_pll *to_mtk_clk_pll(struct clk_hw *hw)
+{
+ return container_of(hw, struct mtk_clk_pll, hw);
+}
+
+static int mtk_pll_is_prepared(struct clk_hw *hw)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+
+ return (readl(pll->base_addr) & CON0_BASE_EN) != 0;
+}
+
+static unsigned long __mtk_pll_recalc_rate(struct mtk_clk_pll *pll, u32 fin,
+ u32 pcw, int postdiv)
+{
+ int pcwbits = pll->data->pcwbits;
+ int pcwfbits;
+ u64 vco;
+ u8 c = 0;
+
+ /* The fractional part of the PLL divider. */
+ pcwfbits = pcwbits > 7 ? pcwbits - 7 : 0;
+
+ vco = (u64)fin * pcw;
+
+ if (pcwfbits && (vco & GENMASK(pcwfbits - 1, 0)))
+ c = 1;
+
+ vco >>= pcwfbits;
+
+ if (c)
+ ++vco;
+
+ return ((unsigned long)vco + postdiv - 1) / postdiv;
+}
+
+static void mtk_pll_set_rate_regs(struct clk_hw *hw, u32 pcw,
+ int postdiv)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 con1, pd, val;
+ int pll_en;
+
+ /* set postdiv */
+ pd = readl(pll->pd_addr);
+ pd &= ~(0x7 << pll->data->pd_shift);
+ pd |= (ffs(postdiv) - 1) << pll->data->pd_shift;
+ writel(pd, pll->pd_addr);
+
+ pll_en = readl(pll->base_addr) & CON0_BASE_EN;
+
+ /* set pcw */
+ val = readl(pll->pcw_addr);
+
+ val &= ~GENMASK(pll->data->pcw_shift + pll->data->pcwbits - 1,
+ pll->data->pcw_shift);
+ val |= pcw << pll->data->pcw_shift;
+ writel(val, pll->pcw_addr);
+
+ con1 = readl(pll->base_addr + 4);
+
+ if (pll_en)
+ con1 |= CON0_PCW_CHG;
+
+ writel(con1, pll->base_addr + 4);
+ if (pll->tuner_addr)
+ writel(con1 + 1, pll->tuner_addr);
+
+ if (pll_en)
+ usleep_range(20, 1000);
+}
+
+/*
+ * mtk_pll_calc_values - calculate good values for a given input frequency.
+ * @pll: The pll
+ * @pcw: The pcw value (output)
+ * @postdiv: The post divider (output)
+ * @freq: The desired target frequency
+ * @fin: The input frequency
+ *
+ */
+static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
+ u32 freq, u32 fin)
+{
+ unsigned long fmin = 1000 * MHZ;
+ u64 _pcw;
+ u32 val;
+
+ if (freq > pll->data->fmax)
+ freq = pll->data->fmax;
+
+ for (val = 0; val < 4; val++) {
+ *postdiv = 1 << val;
+ if (freq * *postdiv >= fmin)
+ break;
+ }
+
+ /* _pcw = freq * postdiv / fin * 2^pcwfbits */
+ _pcw = ((u64)freq << val) << (pll->data->pcwbits - 7);
+ do_div(_pcw, fin);
+
+ *pcw = (u32)_pcw;
+}
+
+static int mtk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 pcw = 0;
+ u32 postdiv;
+
+ mtk_pll_calc_values(pll, &pcw, &postdiv, rate, parent_rate);
+ mtk_pll_set_rate_regs(hw, pcw, postdiv);
+
+ return 0;
+}
+
+static unsigned long mtk_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 postdiv;
+ u32 pcw;
+
+ postdiv = (readl(pll->pd_addr) >> pll->data->pd_shift) & 0x7;
+ postdiv = 1 << postdiv;
+
+ pcw = readl(pll->pcw_addr) >> pll->data->pcw_shift;
+ pcw &= GENMASK(pll->data->pcwbits - 1, 0);
+
+ return __mtk_pll_recalc_rate(pll, parent_rate, pcw, postdiv);
+}
+
+static long mtk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 pcw = 0;
+ int postdiv;
+
+ mtk_pll_calc_values(pll, &pcw, &postdiv, rate, *prate);
+
+ return __mtk_pll_recalc_rate(pll, *prate, pcw, postdiv);
+}
+
+static int mtk_pll_prepare(struct clk_hw *hw)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 r;
+
+ r = readl(pll->pwr_addr) | CON0_PWR_ON;
+ writel(r, pll->pwr_addr);
+ usleep_range(1, 100);
+
+ r = readl(pll->pwr_addr) & ~CON0_ISO_EN;
+ writel(r, pll->pwr_addr);
+ usleep_range(1, 100);
+
+ r = readl(pll->base_addr) | pll->data->en_mask;
+ writel(r, pll->base_addr);
+
+ if (pll->tuner_addr) {
+ r = readl(pll->tuner_addr) | AUDPLL_TUNER_EN;
+ writel(r, pll->tuner_addr);
+ }
+
+ usleep_range(20, 1000);
+
+ if (pll->data->flags & HAVE_RST_BAR) {
+ r = readl(pll->base_addr) | pll->data->rst_bar_mask;
+ writel(r, pll->base_addr);
+ }
+
+ return 0;
+}
+
+static void mtk_pll_unprepare(struct clk_hw *hw)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 r;
+
+ if (pll->data->flags & HAVE_RST_BAR) {
+ r = readl(pll->base_addr) & ~pll->data->rst_bar_mask;
+ writel(r, pll->base_addr);
+ }
+
+ if (pll->tuner_addr) {
+ r = readl(pll->tuner_addr) & ~AUDPLL_TUNER_EN;
+ writel(r, pll->tuner_addr);
+ }
+
+ r = readl(pll->base_addr) & ~CON0_BASE_EN;
+ writel(r, pll->base_addr);
+
+ r = readl(pll->pwr_addr) | CON0_ISO_EN;
+ writel(r, pll->pwr_addr);
+
+ r = readl(pll->pwr_addr) & ~CON0_PWR_ON;
+ writel(r, pll->pwr_addr);
+}
+
+static const struct clk_ops mtk_pll_ops = {
+ .is_prepared = mtk_pll_is_prepared,
+ .prepare = mtk_pll_prepare,
+ .unprepare = mtk_pll_unprepare,
+ .recalc_rate = mtk_pll_recalc_rate,
+ .round_rate = mtk_pll_round_rate,
+ .set_rate = mtk_pll_set_rate,
+};
+
+static struct clk *mtk_clk_register_pll(const struct mtk_pll_data *data,
+ void __iomem *base)
+{
+ struct mtk_clk_pll *pll;
+ struct clk_init_data init;
+ struct clk *clk;
+ const char *parent_name = "clk26m";
+
+ pr_debug("%s(): name: %s\n", __func__, data->name);
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->base_addr = base + data->reg;
+ pll->pwr_addr = base + data->pwr_reg;
+ pll->pd_addr = base + data->pd_reg;
+ pll->pcw_addr = base + data->pcw_reg;
+ if (data->tuner_reg)
+ pll->tuner_addr = base + data->tuner_reg;
+ pll->hw.init = &init;
+ pll->data = data;
+
+ init.name = data->name;
+ init.ops = &mtk_pll_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &pll->hw);
+
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+void __init mtk_clk_register_plls(struct device_node *node,
+ const struct mtk_pll_data *plls, int num_plls, struct clk_onecell_data *clk_data)
+{
+ void __iomem *base;
+ int r, i;
+ struct clk *clk;
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("%s(): ioremap failed\n", __func__);
+ return;
+ }
+
+ for (i = 0; i < num_plls; i++) {
+ const struct mtk_pll_data *pll = &plls[i];
+
+ clk = mtk_clk_register_pll(pll, base);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ pll->name, PTR_ERR(clk));
+ continue;
+ }
+
+ clk_data->clks[pll->id] = clk;
+ }
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 53+ messages in thread* [PATCH 2/6] clk: mediatek: Add initial common clock support for Mediatek SoCs.
@ 2015-03-19 8:42 ` Sascha Hauer
0 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: linux-arm-kernel
From: James Liao <jamesjj.liao@mediatek.com>
This patch adds common clock support for Mediatek SoCs, including plls,
muxes and clock gates.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/clk/Makefile | 1 +
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-gate.c | 137 +++++++++++++++++
drivers/clk/mediatek/clk-gate.h | 49 ++++++
drivers/clk/mediatek/clk-mtk.c | 197 ++++++++++++++++++++++++
drivers/clk/mediatek/clk-mtk.h | 155 +++++++++++++++++++
drivers/clk/mediatek/clk-pll.c | 325 ++++++++++++++++++++++++++++++++++++++++
7 files changed, 865 insertions(+)
create mode 100644 drivers/clk/mediatek/Makefile
create mode 100644 drivers/clk/mediatek/clk-gate.c
create mode 100644 drivers/clk/mediatek/clk-gate.h
create mode 100644 drivers/clk/mediatek/clk-mtk.c
create mode 100644 drivers/clk/mediatek/clk-mtk.h
create mode 100644 drivers/clk/mediatek/clk-pll.c
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d478ceb..6d97203 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/
obj-$(CONFIG_ARCH_HIP04) += hisilicon/
obj-$(CONFIG_ARCH_HIX5HD2) += hisilicon/
obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/
+obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
ifeq ($(CONFIG_COMMON_CLK), y)
obj-$(CONFIG_ARCH_MMP) += mmp/
endif
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
new file mode 100644
index 0000000..c384e97
--- /dev/null
+++ b/drivers/clk/mediatek/Makefile
@@ -0,0 +1 @@
+obj-y += clk-mtk.o clk-pll.o clk-gate.o
diff --git a/drivers/clk/mediatek/clk-gate.c b/drivers/clk/mediatek/clk-gate.c
new file mode 100644
index 0000000..9d77ee3
--- /dev/null
+++ b/drivers/clk/mediatek/clk-gate.c
@@ -0,0 +1,137 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/clkdev.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+static int mtk_cg_bit_is_cleared(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_clk_gate(hw);
+ u32 val;
+
+ regmap_read(cg->regmap, cg->sta_ofs, &val);
+
+ val &= BIT(cg->bit);
+
+ return val == 0;
+}
+
+static int mtk_cg_bit_is_set(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_clk_gate(hw);
+ u32 val;
+
+ regmap_read(cg->regmap, cg->sta_ofs, &val);
+
+ val &= BIT(cg->bit);
+
+ return val != 0;
+}
+
+static void mtk_cg_set_bit(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_clk_gate(hw);
+
+ regmap_write(cg->regmap, cg->set_ofs, BIT(cg->bit));
+}
+
+static void mtk_cg_clr_bit(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_clk_gate(hw);
+
+ regmap_write(cg->regmap, cg->clr_ofs, BIT(cg->bit));
+}
+
+static int mtk_cg_enable(struct clk_hw *hw)
+{
+ mtk_cg_clr_bit(hw);
+
+ return 0;
+}
+
+static void mtk_cg_disable(struct clk_hw *hw)
+{
+ mtk_cg_set_bit(hw);
+}
+
+static int mtk_cg_enable_inv(struct clk_hw *hw)
+{
+ mtk_cg_set_bit(hw);
+
+ return 0;
+}
+
+static void mtk_cg_disable_inv(struct clk_hw *hw)
+{
+ mtk_cg_clr_bit(hw);
+}
+
+const struct clk_ops mtk_clk_gate_ops_setclr = {
+ .is_enabled = mtk_cg_bit_is_cleared,
+ .enable = mtk_cg_enable,
+ .disable = mtk_cg_disable,
+};
+
+const struct clk_ops mtk_clk_gate_ops_setclr_inv = {
+ .is_enabled = mtk_cg_bit_is_set,
+ .enable = mtk_cg_enable_inv,
+ .disable = mtk_cg_disable_inv,
+};
+
+struct clk *mtk_clk_register_gate(
+ const char *name,
+ const char *parent_name,
+ struct regmap *regmap,
+ int set_ofs,
+ int clr_ofs,
+ int sta_ofs,
+ u8 bit,
+ const struct clk_ops *ops)
+{
+ struct mtk_clk_gate *cg;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ cg = kzalloc(sizeof(*cg), GFP_KERNEL);
+ if (!cg)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+ init.ops = ops;
+
+ cg->regmap = regmap;
+ cg->set_ofs = set_ofs;
+ cg->clr_ofs = clr_ofs;
+ cg->sta_ofs = sta_ofs;
+ cg->bit = bit;
+
+ cg->hw.init = &init;
+
+ clk = clk_register(NULL, &cg->hw);
+ if (IS_ERR(clk))
+ kfree(cg);
+
+ return clk;
+}
diff --git a/drivers/clk/mediatek/clk-gate.h b/drivers/clk/mediatek/clk-gate.h
new file mode 100644
index 0000000..6b6780b
--- /dev/null
+++ b/drivers/clk/mediatek/clk-gate.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DRV_CLK_GATE_H
+#define __DRV_CLK_GATE_H
+
+#include <linux/regmap.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+struct mtk_clk_gate {
+ struct clk_hw hw;
+ struct regmap *regmap;
+ int set_ofs;
+ int clr_ofs;
+ int sta_ofs;
+ u8 bit;
+};
+
+static inline struct mtk_clk_gate *to_clk_gate(struct clk_hw *hw)
+{
+ return container_of(hw, struct mtk_clk_gate, hw);
+}
+
+extern const struct clk_ops mtk_clk_gate_ops_setclr;
+extern const struct clk_ops mtk_clk_gate_ops_setclr_inv;
+
+struct clk *mtk_clk_register_gate(
+ const char *name,
+ const char *parent_name,
+ struct regmap *regmap,
+ int set_ofs,
+ int clr_ofs,
+ int sta_ofs,
+ u8 bit,
+ const struct clk_ops *ops);
+
+#endif /* __DRV_CLK_GATE_H */
diff --git a/drivers/clk/mediatek/clk-mtk.c b/drivers/clk/mediatek/clk-mtk.c
new file mode 100644
index 0000000..a0c9f43
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mtk.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/clkdev.h>
+#include <linux/mfd/syscon.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+struct clk_onecell_data *mtk_alloc_clk_data(unsigned int clk_num)
+{
+ int i;
+ struct clk_onecell_data *clk_data;
+
+ clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
+ if (!clk_data)
+ return NULL;
+
+ clk_data->clks = kcalloc(clk_num, sizeof(*clk_data->clks), GFP_KERNEL);
+ if (!clk_data->clks)
+ goto err_out;
+
+ clk_data->clk_num = clk_num;
+
+ for (i = 0; i < clk_num; ++i)
+ clk_data->clks[i] = ERR_PTR(-ENOENT);
+
+ return clk_data;
+err_out:
+ kfree(clk_data);
+
+ return NULL;
+}
+
+void mtk_clk_register_factors(const struct mtk_fixed_factor *clks, int num,
+ struct clk_onecell_data *clk_data)
+{
+ int i;
+ struct clk *clk;
+
+ for (i = 0; i < num; i++) {
+ const struct mtk_fixed_factor *ff = &clks[i];
+
+ clk = clk_register_fixed_factor(NULL, ff->name, ff->parent_name,
+ CLK_SET_RATE_PARENT, ff->mult, ff->div);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ ff->name, PTR_ERR(clk));
+ continue;
+ }
+
+ if (clk_data)
+ clk_data->clks[ff->id] = clk;
+ }
+}
+
+int mtk_clk_register_gates(struct device_node *node, const struct mtk_gate *clks,
+ int num, struct clk_onecell_data *clk_data)
+{
+ int i;
+ struct clk *clk;
+ struct regmap *regmap;
+
+ if (!clk_data)
+ return -ENOMEM;
+
+ regmap = syscon_node_to_regmap(node);
+ if (IS_ERR(regmap)) {
+ pr_err("Cannot find regmap for %s: %ld\n", node->full_name,
+ PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ for (i = 0; i < num; i++) {
+ const struct mtk_gate *gate = &clks[i];
+
+ clk = mtk_clk_register_gate(gate->name, gate->parent_name,
+ regmap,
+ gate->regs->set_ofs,
+ gate->regs->clr_ofs,
+ gate->regs->sta_ofs,
+ gate->shift, gate->ops);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ gate->name, PTR_ERR(clk));
+ continue;
+ }
+
+ clk_data->clks[gate->id] = clk;
+ }
+
+ return 0;
+}
+
+struct clk *mtk_clk_register_composite(const struct mtk_composite *mc,
+ void __iomem *base, spinlock_t *lock)
+{
+ struct clk *clk;
+ struct clk_mux *mux = NULL;
+ struct clk_gate *gate = NULL;
+ struct clk_divider *div = NULL;
+ struct clk_hw *mux_hw = NULL, *gate_hw = NULL, *div_hw = NULL;
+ const struct clk_ops *mux_ops = NULL, *gate_ops = NULL, *div_ops = NULL;
+ const char * const *parent_names;
+ const char *parent;
+ int num_parents;
+ int ret;
+
+ if (mc->mux_shift >= 0) {
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return ERR_PTR(-ENOMEM);
+
+ mux->reg = base + mc->mux_reg;
+ mux->mask = BIT(mc->mux_width) - 1;
+ mux->shift = mc->mux_shift;
+ mux->lock = lock;
+
+ mux_hw = &mux->hw;
+ mux_ops = &clk_mux_ops;
+
+ parent_names = mc->parent_names;
+ num_parents = mc->num_parents;
+ } else {
+ parent = mc->parent;
+ parent_names = &parent;
+ num_parents = 1;
+ }
+
+ if (mc->gate_shift >= 0) {
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ gate->reg = base + mc->gate_reg;
+ gate->bit_idx = mc->gate_shift;
+ gate->flags = CLK_GATE_SET_TO_DISABLE;
+ gate->lock = lock;
+
+ gate_hw = &gate->hw;
+ gate_ops = &clk_gate_ops;
+ }
+
+ if (mc->divider_shift >= 0) {
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ div->reg = base + mc->divider_reg;
+ div->shift = mc->divider_shift;
+ div->width = mc->divider_width;
+ div->lock = lock;
+
+ div_hw = &div->hw;
+ div_ops = &clk_divider_ops;
+ }
+
+ clk = clk_register_composite(NULL, mc->name, parent_names, num_parents,
+ mux_hw, mux_ops,
+ div_hw, div_ops,
+ gate_hw, gate_ops,
+ mc->flags);
+
+ if (IS_ERR(clk)) {
+ kfree(gate);
+ kfree(mux);
+ }
+
+ return clk;
+err_out:
+ kfree(mux);
+
+ return ERR_PTR(ret);
+}
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
new file mode 100644
index 0000000..5aaba81
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -0,0 +1,155 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DRV_CLK_MTK_H
+#define __DRV_CLK_MTK_H
+
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+#define MAX_MUX_GATE_BIT 31
+#define INVALID_MUX_GATE_BIT (MAX_MUX_GATE_BIT + 1)
+
+#define MHZ (1000 * 1000)
+
+struct mtk_fixed_factor {
+ int id;
+ const char *name;
+ const char *parent_name;
+ int mult;
+ int div;
+};
+
+#define FACTOR(_id, _name, _parent, _mult, _div) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .mult = _mult, \
+ .div = _div, \
+ }
+
+extern void mtk_clk_register_factors(const struct mtk_fixed_factor *clks,
+ int num, struct clk_onecell_data *clk_data);
+
+struct mtk_composite {
+ int id;
+ const char *name;
+ const char * const * parent_names;
+ const char *parent;
+ unsigned flags;
+
+ uint32_t mux_reg;
+ uint32_t divider_reg;
+ uint32_t gate_reg;
+
+ signed char mux_shift;
+ signed char mux_width;
+ signed char gate_shift;
+
+ signed char divider_shift;
+ signed char divider_width;
+
+ signed char num_parents;
+};
+
+#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) { \
+ .id = _id, \
+ .name = _name, \
+ .mux_reg = _reg, \
+ .mux_shift = _shift, \
+ .mux_width = _width, \
+ .gate_reg = _reg, \
+ .gate_shift = _gate, \
+ .divider_shift = -1, \
+ .parent_names = _parents, \
+ .num_parents = ARRAY_SIZE(_parents), \
+ .flags = CLK_SET_RATE_PARENT, \
+ }
+
+#define MUX(_id, _name, _parents, _reg, _shift, _width) { \
+ .id = _id, \
+ .name = _name, \
+ .mux_reg = _reg, \
+ .mux_shift = _shift, \
+ .mux_width = _width, \
+ .gate_shift = -1, \
+ .divider_shift = -1, \
+ .parent_names = _parents, \
+ .num_parents = ARRAY_SIZE(_parents), \
+ .flags = CLK_SET_RATE_PARENT, \
+ }
+
+#define DIV_GATE(_id, _name, _parent, _gate_reg, _gate_shift, _div_reg, _div_width, _div_shift) { \
+ .id = _id, \
+ .parent = _parent, \
+ .name = _name, \
+ .divider_reg = _div_reg, \
+ .divider_shift = _div_shift, \
+ .divider_width = _div_width, \
+ .gate_reg = _gate_reg, \
+ .gate_shift = _gate_shift, \
+ .mux_shift = -1, \
+ .flags = 0, \
+ }
+
+struct clk *mtk_clk_register_composite(const struct mtk_composite *mc,
+ void __iomem *base, spinlock_t *lock);
+
+struct mtk_gate_regs {
+ u32 sta_ofs;
+ u32 clr_ofs;
+ u32 set_ofs;
+};
+
+struct mtk_gate {
+ int id;
+ const char *name;
+ const char *parent_name;
+ const struct mtk_gate_regs *regs;
+ int shift;
+ const struct clk_ops *ops;
+};
+
+int mtk_clk_register_gates(struct device_node *node, const struct mtk_gate *clks,
+ int num, struct clk_onecell_data *clk_data);
+
+struct clk_onecell_data *mtk_alloc_clk_data(unsigned int clk_num);
+
+#define HAVE_RST_BAR BIT(0)
+
+struct mtk_pll_data {
+ int id;
+ const char *name;
+ uint32_t reg;
+ uint32_t pwr_reg;
+ uint32_t en_mask;
+ uint32_t pd_reg;
+ uint32_t tuner_reg;
+ int pd_shift;
+ unsigned int flags;
+ const struct clk_ops *ops;
+ u32 rst_bar_mask;
+ unsigned long fmax;
+ int pcwbits;
+ uint32_t pcw_reg;
+ int pcw_shift;
+};
+
+void __init mtk_clk_register_plls(struct device_node *node,
+ const struct mtk_pll_data *plls, int num_plls,
+ struct clk_onecell_data *clk_data);
+
+#endif /* __DRV_CLK_MTK_H */
diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
new file mode 100644
index 0000000..5589e45
--- /dev/null
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -0,0 +1,325 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
+
+#include "clk-mtk.h"
+
+#define CON0_BASE_EN BIT(0)
+#define CON0_PWR_ON BIT(0)
+#define CON0_ISO_EN BIT(1)
+#define CON0_PCW_CHG BIT(31)
+
+#define AUDPLL_TUNER_EN BIT(31)
+
+/*
+ * MediaTek PLLs are configured through their pcw value. The pcw value describes
+ * a divider in the PLL feedback loop which consists of 7 bits for the integer
+ * part and the remaining bits (if present) for the fractional part. Also they
+ * have a 3 bit power-of-two post divider.
+ */
+
+struct mtk_clk_pll {
+ struct clk_hw hw;
+ void __iomem *base_addr;
+ void __iomem *pd_addr;
+ void __iomem *pwr_addr;
+ void __iomem *tuner_addr;
+ void __iomem *pcw_addr;
+ const struct mtk_pll_data *data;
+};
+
+static inline struct mtk_clk_pll *to_mtk_clk_pll(struct clk_hw *hw)
+{
+ return container_of(hw, struct mtk_clk_pll, hw);
+}
+
+static int mtk_pll_is_prepared(struct clk_hw *hw)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+
+ return (readl(pll->base_addr) & CON0_BASE_EN) != 0;
+}
+
+static unsigned long __mtk_pll_recalc_rate(struct mtk_clk_pll *pll, u32 fin,
+ u32 pcw, int postdiv)
+{
+ int pcwbits = pll->data->pcwbits;
+ int pcwfbits;
+ u64 vco;
+ u8 c = 0;
+
+ /* The fractional part of the PLL divider. */
+ pcwfbits = pcwbits > 7 ? pcwbits - 7 : 0;
+
+ vco = (u64)fin * pcw;
+
+ if (pcwfbits && (vco & GENMASK(pcwfbits - 1, 0)))
+ c = 1;
+
+ vco >>= pcwfbits;
+
+ if (c)
+ ++vco;
+
+ return ((unsigned long)vco + postdiv - 1) / postdiv;
+}
+
+static void mtk_pll_set_rate_regs(struct clk_hw *hw, u32 pcw,
+ int postdiv)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 con1, pd, val;
+ int pll_en;
+
+ /* set postdiv */
+ pd = readl(pll->pd_addr);
+ pd &= ~(0x7 << pll->data->pd_shift);
+ pd |= (ffs(postdiv) - 1) << pll->data->pd_shift;
+ writel(pd, pll->pd_addr);
+
+ pll_en = readl(pll->base_addr) & CON0_BASE_EN;
+
+ /* set pcw */
+ val = readl(pll->pcw_addr);
+
+ val &= ~GENMASK(pll->data->pcw_shift + pll->data->pcwbits - 1,
+ pll->data->pcw_shift);
+ val |= pcw << pll->data->pcw_shift;
+ writel(val, pll->pcw_addr);
+
+ con1 = readl(pll->base_addr + 4);
+
+ if (pll_en)
+ con1 |= CON0_PCW_CHG;
+
+ writel(con1, pll->base_addr + 4);
+ if (pll->tuner_addr)
+ writel(con1 + 1, pll->tuner_addr);
+
+ if (pll_en)
+ usleep_range(20, 1000);
+}
+
+/*
+ * mtk_pll_calc_values - calculate good values for a given input frequency.
+ * @pll: The pll
+ * @pcw: The pcw value (output)
+ * @postdiv: The post divider (output)
+ * @freq: The desired target frequency
+ * @fin: The input frequency
+ *
+ */
+static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
+ u32 freq, u32 fin)
+{
+ unsigned long fmin = 1000 * MHZ;
+ u64 _pcw;
+ u32 val;
+
+ if (freq > pll->data->fmax)
+ freq = pll->data->fmax;
+
+ for (val = 0; val < 4; val++) {
+ *postdiv = 1 << val;
+ if (freq * *postdiv >= fmin)
+ break;
+ }
+
+ /* _pcw = freq * postdiv / fin * 2^pcwfbits */
+ _pcw = ((u64)freq << val) << (pll->data->pcwbits - 7);
+ do_div(_pcw, fin);
+
+ *pcw = (u32)_pcw;
+}
+
+static int mtk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 pcw = 0;
+ u32 postdiv;
+
+ mtk_pll_calc_values(pll, &pcw, &postdiv, rate, parent_rate);
+ mtk_pll_set_rate_regs(hw, pcw, postdiv);
+
+ return 0;
+}
+
+static unsigned long mtk_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 postdiv;
+ u32 pcw;
+
+ postdiv = (readl(pll->pd_addr) >> pll->data->pd_shift) & 0x7;
+ postdiv = 1 << postdiv;
+
+ pcw = readl(pll->pcw_addr) >> pll->data->pcw_shift;
+ pcw &= GENMASK(pll->data->pcwbits - 1, 0);
+
+ return __mtk_pll_recalc_rate(pll, parent_rate, pcw, postdiv);
+}
+
+static long mtk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 pcw = 0;
+ int postdiv;
+
+ mtk_pll_calc_values(pll, &pcw, &postdiv, rate, *prate);
+
+ return __mtk_pll_recalc_rate(pll, *prate, pcw, postdiv);
+}
+
+static int mtk_pll_prepare(struct clk_hw *hw)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 r;
+
+ r = readl(pll->pwr_addr) | CON0_PWR_ON;
+ writel(r, pll->pwr_addr);
+ usleep_range(1, 100);
+
+ r = readl(pll->pwr_addr) & ~CON0_ISO_EN;
+ writel(r, pll->pwr_addr);
+ usleep_range(1, 100);
+
+ r = readl(pll->base_addr) | pll->data->en_mask;
+ writel(r, pll->base_addr);
+
+ if (pll->tuner_addr) {
+ r = readl(pll->tuner_addr) | AUDPLL_TUNER_EN;
+ writel(r, pll->tuner_addr);
+ }
+
+ usleep_range(20, 1000);
+
+ if (pll->data->flags & HAVE_RST_BAR) {
+ r = readl(pll->base_addr) | pll->data->rst_bar_mask;
+ writel(r, pll->base_addr);
+ }
+
+ return 0;
+}
+
+static void mtk_pll_unprepare(struct clk_hw *hw)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 r;
+
+ if (pll->data->flags & HAVE_RST_BAR) {
+ r = readl(pll->base_addr) & ~pll->data->rst_bar_mask;
+ writel(r, pll->base_addr);
+ }
+
+ if (pll->tuner_addr) {
+ r = readl(pll->tuner_addr) & ~AUDPLL_TUNER_EN;
+ writel(r, pll->tuner_addr);
+ }
+
+ r = readl(pll->base_addr) & ~CON0_BASE_EN;
+ writel(r, pll->base_addr);
+
+ r = readl(pll->pwr_addr) | CON0_ISO_EN;
+ writel(r, pll->pwr_addr);
+
+ r = readl(pll->pwr_addr) & ~CON0_PWR_ON;
+ writel(r, pll->pwr_addr);
+}
+
+static const struct clk_ops mtk_pll_ops = {
+ .is_prepared = mtk_pll_is_prepared,
+ .prepare = mtk_pll_prepare,
+ .unprepare = mtk_pll_unprepare,
+ .recalc_rate = mtk_pll_recalc_rate,
+ .round_rate = mtk_pll_round_rate,
+ .set_rate = mtk_pll_set_rate,
+};
+
+static struct clk *mtk_clk_register_pll(const struct mtk_pll_data *data,
+ void __iomem *base)
+{
+ struct mtk_clk_pll *pll;
+ struct clk_init_data init;
+ struct clk *clk;
+ const char *parent_name = "clk26m";
+
+ pr_debug("%s(): name: %s\n", __func__, data->name);
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->base_addr = base + data->reg;
+ pll->pwr_addr = base + data->pwr_reg;
+ pll->pd_addr = base + data->pd_reg;
+ pll->pcw_addr = base + data->pcw_reg;
+ if (data->tuner_reg)
+ pll->tuner_addr = base + data->tuner_reg;
+ pll->hw.init = &init;
+ pll->data = data;
+
+ init.name = data->name;
+ init.ops = &mtk_pll_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &pll->hw);
+
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+void __init mtk_clk_register_plls(struct device_node *node,
+ const struct mtk_pll_data *plls, int num_plls, struct clk_onecell_data *clk_data)
+{
+ void __iomem *base;
+ int r, i;
+ struct clk *clk;
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("%s(): ioremap failed\n", __func__);
+ return;
+ }
+
+ for (i = 0; i < num_plls; i++) {
+ const struct mtk_pll_data *pll = &plls[i];
+
+ clk = mtk_clk_register_pll(pll, base);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ pll->name, PTR_ERR(clk));
+ continue;
+ }
+
+ clk_data->clks[pll->id] = clk;
+ }
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 53+ messages in thread* [PATCH 2/6] clk: mediatek: Add initial common clock support for Mediatek SoCs.
@ 2015-03-19 8:42 ` Sascha Hauer
0 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: Mike Turquette
Cc: James Liao, Stephen Boyd, Sascha Hauer, YH Chen,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Henry Chen,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ, Matthias Brugger, Yingjoe Chen,
Eddie Huang, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
From: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
This patch adds common clock support for Mediatek SoCs, including plls,
muxes and clock gates.
Signed-off-by: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Henry Chen <henryc.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
drivers/clk/Makefile | 1 +
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-gate.c | 137 +++++++++++++++++
drivers/clk/mediatek/clk-gate.h | 49 ++++++
drivers/clk/mediatek/clk-mtk.c | 197 ++++++++++++++++++++++++
drivers/clk/mediatek/clk-mtk.h | 155 +++++++++++++++++++
drivers/clk/mediatek/clk-pll.c | 325 ++++++++++++++++++++++++++++++++++++++++
7 files changed, 865 insertions(+)
create mode 100644 drivers/clk/mediatek/Makefile
create mode 100644 drivers/clk/mediatek/clk-gate.c
create mode 100644 drivers/clk/mediatek/clk-gate.h
create mode 100644 drivers/clk/mediatek/clk-mtk.c
create mode 100644 drivers/clk/mediatek/clk-mtk.h
create mode 100644 drivers/clk/mediatek/clk-pll.c
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d478ceb..6d97203 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/
obj-$(CONFIG_ARCH_HIP04) += hisilicon/
obj-$(CONFIG_ARCH_HIX5HD2) += hisilicon/
obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/
+obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
ifeq ($(CONFIG_COMMON_CLK), y)
obj-$(CONFIG_ARCH_MMP) += mmp/
endif
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
new file mode 100644
index 0000000..c384e97
--- /dev/null
+++ b/drivers/clk/mediatek/Makefile
@@ -0,0 +1 @@
+obj-y += clk-mtk.o clk-pll.o clk-gate.o
diff --git a/drivers/clk/mediatek/clk-gate.c b/drivers/clk/mediatek/clk-gate.c
new file mode 100644
index 0000000..9d77ee3
--- /dev/null
+++ b/drivers/clk/mediatek/clk-gate.c
@@ -0,0 +1,137 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/clkdev.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+static int mtk_cg_bit_is_cleared(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_clk_gate(hw);
+ u32 val;
+
+ regmap_read(cg->regmap, cg->sta_ofs, &val);
+
+ val &= BIT(cg->bit);
+
+ return val == 0;
+}
+
+static int mtk_cg_bit_is_set(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_clk_gate(hw);
+ u32 val;
+
+ regmap_read(cg->regmap, cg->sta_ofs, &val);
+
+ val &= BIT(cg->bit);
+
+ return val != 0;
+}
+
+static void mtk_cg_set_bit(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_clk_gate(hw);
+
+ regmap_write(cg->regmap, cg->set_ofs, BIT(cg->bit));
+}
+
+static void mtk_cg_clr_bit(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_clk_gate(hw);
+
+ regmap_write(cg->regmap, cg->clr_ofs, BIT(cg->bit));
+}
+
+static int mtk_cg_enable(struct clk_hw *hw)
+{
+ mtk_cg_clr_bit(hw);
+
+ return 0;
+}
+
+static void mtk_cg_disable(struct clk_hw *hw)
+{
+ mtk_cg_set_bit(hw);
+}
+
+static int mtk_cg_enable_inv(struct clk_hw *hw)
+{
+ mtk_cg_set_bit(hw);
+
+ return 0;
+}
+
+static void mtk_cg_disable_inv(struct clk_hw *hw)
+{
+ mtk_cg_clr_bit(hw);
+}
+
+const struct clk_ops mtk_clk_gate_ops_setclr = {
+ .is_enabled = mtk_cg_bit_is_cleared,
+ .enable = mtk_cg_enable,
+ .disable = mtk_cg_disable,
+};
+
+const struct clk_ops mtk_clk_gate_ops_setclr_inv = {
+ .is_enabled = mtk_cg_bit_is_set,
+ .enable = mtk_cg_enable_inv,
+ .disable = mtk_cg_disable_inv,
+};
+
+struct clk *mtk_clk_register_gate(
+ const char *name,
+ const char *parent_name,
+ struct regmap *regmap,
+ int set_ofs,
+ int clr_ofs,
+ int sta_ofs,
+ u8 bit,
+ const struct clk_ops *ops)
+{
+ struct mtk_clk_gate *cg;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ cg = kzalloc(sizeof(*cg), GFP_KERNEL);
+ if (!cg)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+ init.ops = ops;
+
+ cg->regmap = regmap;
+ cg->set_ofs = set_ofs;
+ cg->clr_ofs = clr_ofs;
+ cg->sta_ofs = sta_ofs;
+ cg->bit = bit;
+
+ cg->hw.init = &init;
+
+ clk = clk_register(NULL, &cg->hw);
+ if (IS_ERR(clk))
+ kfree(cg);
+
+ return clk;
+}
diff --git a/drivers/clk/mediatek/clk-gate.h b/drivers/clk/mediatek/clk-gate.h
new file mode 100644
index 0000000..6b6780b
--- /dev/null
+++ b/drivers/clk/mediatek/clk-gate.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DRV_CLK_GATE_H
+#define __DRV_CLK_GATE_H
+
+#include <linux/regmap.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+struct mtk_clk_gate {
+ struct clk_hw hw;
+ struct regmap *regmap;
+ int set_ofs;
+ int clr_ofs;
+ int sta_ofs;
+ u8 bit;
+};
+
+static inline struct mtk_clk_gate *to_clk_gate(struct clk_hw *hw)
+{
+ return container_of(hw, struct mtk_clk_gate, hw);
+}
+
+extern const struct clk_ops mtk_clk_gate_ops_setclr;
+extern const struct clk_ops mtk_clk_gate_ops_setclr_inv;
+
+struct clk *mtk_clk_register_gate(
+ const char *name,
+ const char *parent_name,
+ struct regmap *regmap,
+ int set_ofs,
+ int clr_ofs,
+ int sta_ofs,
+ u8 bit,
+ const struct clk_ops *ops);
+
+#endif /* __DRV_CLK_GATE_H */
diff --git a/drivers/clk/mediatek/clk-mtk.c b/drivers/clk/mediatek/clk-mtk.c
new file mode 100644
index 0000000..a0c9f43
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mtk.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/clkdev.h>
+#include <linux/mfd/syscon.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+struct clk_onecell_data *mtk_alloc_clk_data(unsigned int clk_num)
+{
+ int i;
+ struct clk_onecell_data *clk_data;
+
+ clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
+ if (!clk_data)
+ return NULL;
+
+ clk_data->clks = kcalloc(clk_num, sizeof(*clk_data->clks), GFP_KERNEL);
+ if (!clk_data->clks)
+ goto err_out;
+
+ clk_data->clk_num = clk_num;
+
+ for (i = 0; i < clk_num; ++i)
+ clk_data->clks[i] = ERR_PTR(-ENOENT);
+
+ return clk_data;
+err_out:
+ kfree(clk_data);
+
+ return NULL;
+}
+
+void mtk_clk_register_factors(const struct mtk_fixed_factor *clks, int num,
+ struct clk_onecell_data *clk_data)
+{
+ int i;
+ struct clk *clk;
+
+ for (i = 0; i < num; i++) {
+ const struct mtk_fixed_factor *ff = &clks[i];
+
+ clk = clk_register_fixed_factor(NULL, ff->name, ff->parent_name,
+ CLK_SET_RATE_PARENT, ff->mult, ff->div);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ ff->name, PTR_ERR(clk));
+ continue;
+ }
+
+ if (clk_data)
+ clk_data->clks[ff->id] = clk;
+ }
+}
+
+int mtk_clk_register_gates(struct device_node *node, const struct mtk_gate *clks,
+ int num, struct clk_onecell_data *clk_data)
+{
+ int i;
+ struct clk *clk;
+ struct regmap *regmap;
+
+ if (!clk_data)
+ return -ENOMEM;
+
+ regmap = syscon_node_to_regmap(node);
+ if (IS_ERR(regmap)) {
+ pr_err("Cannot find regmap for %s: %ld\n", node->full_name,
+ PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ for (i = 0; i < num; i++) {
+ const struct mtk_gate *gate = &clks[i];
+
+ clk = mtk_clk_register_gate(gate->name, gate->parent_name,
+ regmap,
+ gate->regs->set_ofs,
+ gate->regs->clr_ofs,
+ gate->regs->sta_ofs,
+ gate->shift, gate->ops);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ gate->name, PTR_ERR(clk));
+ continue;
+ }
+
+ clk_data->clks[gate->id] = clk;
+ }
+
+ return 0;
+}
+
+struct clk *mtk_clk_register_composite(const struct mtk_composite *mc,
+ void __iomem *base, spinlock_t *lock)
+{
+ struct clk *clk;
+ struct clk_mux *mux = NULL;
+ struct clk_gate *gate = NULL;
+ struct clk_divider *div = NULL;
+ struct clk_hw *mux_hw = NULL, *gate_hw = NULL, *div_hw = NULL;
+ const struct clk_ops *mux_ops = NULL, *gate_ops = NULL, *div_ops = NULL;
+ const char * const *parent_names;
+ const char *parent;
+ int num_parents;
+ int ret;
+
+ if (mc->mux_shift >= 0) {
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return ERR_PTR(-ENOMEM);
+
+ mux->reg = base + mc->mux_reg;
+ mux->mask = BIT(mc->mux_width) - 1;
+ mux->shift = mc->mux_shift;
+ mux->lock = lock;
+
+ mux_hw = &mux->hw;
+ mux_ops = &clk_mux_ops;
+
+ parent_names = mc->parent_names;
+ num_parents = mc->num_parents;
+ } else {
+ parent = mc->parent;
+ parent_names = &parent;
+ num_parents = 1;
+ }
+
+ if (mc->gate_shift >= 0) {
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ gate->reg = base + mc->gate_reg;
+ gate->bit_idx = mc->gate_shift;
+ gate->flags = CLK_GATE_SET_TO_DISABLE;
+ gate->lock = lock;
+
+ gate_hw = &gate->hw;
+ gate_ops = &clk_gate_ops;
+ }
+
+ if (mc->divider_shift >= 0) {
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ div->reg = base + mc->divider_reg;
+ div->shift = mc->divider_shift;
+ div->width = mc->divider_width;
+ div->lock = lock;
+
+ div_hw = &div->hw;
+ div_ops = &clk_divider_ops;
+ }
+
+ clk = clk_register_composite(NULL, mc->name, parent_names, num_parents,
+ mux_hw, mux_ops,
+ div_hw, div_ops,
+ gate_hw, gate_ops,
+ mc->flags);
+
+ if (IS_ERR(clk)) {
+ kfree(gate);
+ kfree(mux);
+ }
+
+ return clk;
+err_out:
+ kfree(mux);
+
+ return ERR_PTR(ret);
+}
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
new file mode 100644
index 0000000..5aaba81
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -0,0 +1,155 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DRV_CLK_MTK_H
+#define __DRV_CLK_MTK_H
+
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+#define MAX_MUX_GATE_BIT 31
+#define INVALID_MUX_GATE_BIT (MAX_MUX_GATE_BIT + 1)
+
+#define MHZ (1000 * 1000)
+
+struct mtk_fixed_factor {
+ int id;
+ const char *name;
+ const char *parent_name;
+ int mult;
+ int div;
+};
+
+#define FACTOR(_id, _name, _parent, _mult, _div) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .mult = _mult, \
+ .div = _div, \
+ }
+
+extern void mtk_clk_register_factors(const struct mtk_fixed_factor *clks,
+ int num, struct clk_onecell_data *clk_data);
+
+struct mtk_composite {
+ int id;
+ const char *name;
+ const char * const * parent_names;
+ const char *parent;
+ unsigned flags;
+
+ uint32_t mux_reg;
+ uint32_t divider_reg;
+ uint32_t gate_reg;
+
+ signed char mux_shift;
+ signed char mux_width;
+ signed char gate_shift;
+
+ signed char divider_shift;
+ signed char divider_width;
+
+ signed char num_parents;
+};
+
+#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) { \
+ .id = _id, \
+ .name = _name, \
+ .mux_reg = _reg, \
+ .mux_shift = _shift, \
+ .mux_width = _width, \
+ .gate_reg = _reg, \
+ .gate_shift = _gate, \
+ .divider_shift = -1, \
+ .parent_names = _parents, \
+ .num_parents = ARRAY_SIZE(_parents), \
+ .flags = CLK_SET_RATE_PARENT, \
+ }
+
+#define MUX(_id, _name, _parents, _reg, _shift, _width) { \
+ .id = _id, \
+ .name = _name, \
+ .mux_reg = _reg, \
+ .mux_shift = _shift, \
+ .mux_width = _width, \
+ .gate_shift = -1, \
+ .divider_shift = -1, \
+ .parent_names = _parents, \
+ .num_parents = ARRAY_SIZE(_parents), \
+ .flags = CLK_SET_RATE_PARENT, \
+ }
+
+#define DIV_GATE(_id, _name, _parent, _gate_reg, _gate_shift, _div_reg, _div_width, _div_shift) { \
+ .id = _id, \
+ .parent = _parent, \
+ .name = _name, \
+ .divider_reg = _div_reg, \
+ .divider_shift = _div_shift, \
+ .divider_width = _div_width, \
+ .gate_reg = _gate_reg, \
+ .gate_shift = _gate_shift, \
+ .mux_shift = -1, \
+ .flags = 0, \
+ }
+
+struct clk *mtk_clk_register_composite(const struct mtk_composite *mc,
+ void __iomem *base, spinlock_t *lock);
+
+struct mtk_gate_regs {
+ u32 sta_ofs;
+ u32 clr_ofs;
+ u32 set_ofs;
+};
+
+struct mtk_gate {
+ int id;
+ const char *name;
+ const char *parent_name;
+ const struct mtk_gate_regs *regs;
+ int shift;
+ const struct clk_ops *ops;
+};
+
+int mtk_clk_register_gates(struct device_node *node, const struct mtk_gate *clks,
+ int num, struct clk_onecell_data *clk_data);
+
+struct clk_onecell_data *mtk_alloc_clk_data(unsigned int clk_num);
+
+#define HAVE_RST_BAR BIT(0)
+
+struct mtk_pll_data {
+ int id;
+ const char *name;
+ uint32_t reg;
+ uint32_t pwr_reg;
+ uint32_t en_mask;
+ uint32_t pd_reg;
+ uint32_t tuner_reg;
+ int pd_shift;
+ unsigned int flags;
+ const struct clk_ops *ops;
+ u32 rst_bar_mask;
+ unsigned long fmax;
+ int pcwbits;
+ uint32_t pcw_reg;
+ int pcw_shift;
+};
+
+void __init mtk_clk_register_plls(struct device_node *node,
+ const struct mtk_pll_data *plls, int num_plls,
+ struct clk_onecell_data *clk_data);
+
+#endif /* __DRV_CLK_MTK_H */
diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
new file mode 100644
index 0000000..5589e45
--- /dev/null
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -0,0 +1,325 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
+
+#include "clk-mtk.h"
+
+#define CON0_BASE_EN BIT(0)
+#define CON0_PWR_ON BIT(0)
+#define CON0_ISO_EN BIT(1)
+#define CON0_PCW_CHG BIT(31)
+
+#define AUDPLL_TUNER_EN BIT(31)
+
+/*
+ * MediaTek PLLs are configured through their pcw value. The pcw value describes
+ * a divider in the PLL feedback loop which consists of 7 bits for the integer
+ * part and the remaining bits (if present) for the fractional part. Also they
+ * have a 3 bit power-of-two post divider.
+ */
+
+struct mtk_clk_pll {
+ struct clk_hw hw;
+ void __iomem *base_addr;
+ void __iomem *pd_addr;
+ void __iomem *pwr_addr;
+ void __iomem *tuner_addr;
+ void __iomem *pcw_addr;
+ const struct mtk_pll_data *data;
+};
+
+static inline struct mtk_clk_pll *to_mtk_clk_pll(struct clk_hw *hw)
+{
+ return container_of(hw, struct mtk_clk_pll, hw);
+}
+
+static int mtk_pll_is_prepared(struct clk_hw *hw)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+
+ return (readl(pll->base_addr) & CON0_BASE_EN) != 0;
+}
+
+static unsigned long __mtk_pll_recalc_rate(struct mtk_clk_pll *pll, u32 fin,
+ u32 pcw, int postdiv)
+{
+ int pcwbits = pll->data->pcwbits;
+ int pcwfbits;
+ u64 vco;
+ u8 c = 0;
+
+ /* The fractional part of the PLL divider. */
+ pcwfbits = pcwbits > 7 ? pcwbits - 7 : 0;
+
+ vco = (u64)fin * pcw;
+
+ if (pcwfbits && (vco & GENMASK(pcwfbits - 1, 0)))
+ c = 1;
+
+ vco >>= pcwfbits;
+
+ if (c)
+ ++vco;
+
+ return ((unsigned long)vco + postdiv - 1) / postdiv;
+}
+
+static void mtk_pll_set_rate_regs(struct clk_hw *hw, u32 pcw,
+ int postdiv)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 con1, pd, val;
+ int pll_en;
+
+ /* set postdiv */
+ pd = readl(pll->pd_addr);
+ pd &= ~(0x7 << pll->data->pd_shift);
+ pd |= (ffs(postdiv) - 1) << pll->data->pd_shift;
+ writel(pd, pll->pd_addr);
+
+ pll_en = readl(pll->base_addr) & CON0_BASE_EN;
+
+ /* set pcw */
+ val = readl(pll->pcw_addr);
+
+ val &= ~GENMASK(pll->data->pcw_shift + pll->data->pcwbits - 1,
+ pll->data->pcw_shift);
+ val |= pcw << pll->data->pcw_shift;
+ writel(val, pll->pcw_addr);
+
+ con1 = readl(pll->base_addr + 4);
+
+ if (pll_en)
+ con1 |= CON0_PCW_CHG;
+
+ writel(con1, pll->base_addr + 4);
+ if (pll->tuner_addr)
+ writel(con1 + 1, pll->tuner_addr);
+
+ if (pll_en)
+ usleep_range(20, 1000);
+}
+
+/*
+ * mtk_pll_calc_values - calculate good values for a given input frequency.
+ * @pll: The pll
+ * @pcw: The pcw value (output)
+ * @postdiv: The post divider (output)
+ * @freq: The desired target frequency
+ * @fin: The input frequency
+ *
+ */
+static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
+ u32 freq, u32 fin)
+{
+ unsigned long fmin = 1000 * MHZ;
+ u64 _pcw;
+ u32 val;
+
+ if (freq > pll->data->fmax)
+ freq = pll->data->fmax;
+
+ for (val = 0; val < 4; val++) {
+ *postdiv = 1 << val;
+ if (freq * *postdiv >= fmin)
+ break;
+ }
+
+ /* _pcw = freq * postdiv / fin * 2^pcwfbits */
+ _pcw = ((u64)freq << val) << (pll->data->pcwbits - 7);
+ do_div(_pcw, fin);
+
+ *pcw = (u32)_pcw;
+}
+
+static int mtk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 pcw = 0;
+ u32 postdiv;
+
+ mtk_pll_calc_values(pll, &pcw, &postdiv, rate, parent_rate);
+ mtk_pll_set_rate_regs(hw, pcw, postdiv);
+
+ return 0;
+}
+
+static unsigned long mtk_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 postdiv;
+ u32 pcw;
+
+ postdiv = (readl(pll->pd_addr) >> pll->data->pd_shift) & 0x7;
+ postdiv = 1 << postdiv;
+
+ pcw = readl(pll->pcw_addr) >> pll->data->pcw_shift;
+ pcw &= GENMASK(pll->data->pcwbits - 1, 0);
+
+ return __mtk_pll_recalc_rate(pll, parent_rate, pcw, postdiv);
+}
+
+static long mtk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 pcw = 0;
+ int postdiv;
+
+ mtk_pll_calc_values(pll, &pcw, &postdiv, rate, *prate);
+
+ return __mtk_pll_recalc_rate(pll, *prate, pcw, postdiv);
+}
+
+static int mtk_pll_prepare(struct clk_hw *hw)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 r;
+
+ r = readl(pll->pwr_addr) | CON0_PWR_ON;
+ writel(r, pll->pwr_addr);
+ usleep_range(1, 100);
+
+ r = readl(pll->pwr_addr) & ~CON0_ISO_EN;
+ writel(r, pll->pwr_addr);
+ usleep_range(1, 100);
+
+ r = readl(pll->base_addr) | pll->data->en_mask;
+ writel(r, pll->base_addr);
+
+ if (pll->tuner_addr) {
+ r = readl(pll->tuner_addr) | AUDPLL_TUNER_EN;
+ writel(r, pll->tuner_addr);
+ }
+
+ usleep_range(20, 1000);
+
+ if (pll->data->flags & HAVE_RST_BAR) {
+ r = readl(pll->base_addr) | pll->data->rst_bar_mask;
+ writel(r, pll->base_addr);
+ }
+
+ return 0;
+}
+
+static void mtk_pll_unprepare(struct clk_hw *hw)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+ u32 r;
+
+ if (pll->data->flags & HAVE_RST_BAR) {
+ r = readl(pll->base_addr) & ~pll->data->rst_bar_mask;
+ writel(r, pll->base_addr);
+ }
+
+ if (pll->tuner_addr) {
+ r = readl(pll->tuner_addr) & ~AUDPLL_TUNER_EN;
+ writel(r, pll->tuner_addr);
+ }
+
+ r = readl(pll->base_addr) & ~CON0_BASE_EN;
+ writel(r, pll->base_addr);
+
+ r = readl(pll->pwr_addr) | CON0_ISO_EN;
+ writel(r, pll->pwr_addr);
+
+ r = readl(pll->pwr_addr) & ~CON0_PWR_ON;
+ writel(r, pll->pwr_addr);
+}
+
+static const struct clk_ops mtk_pll_ops = {
+ .is_prepared = mtk_pll_is_prepared,
+ .prepare = mtk_pll_prepare,
+ .unprepare = mtk_pll_unprepare,
+ .recalc_rate = mtk_pll_recalc_rate,
+ .round_rate = mtk_pll_round_rate,
+ .set_rate = mtk_pll_set_rate,
+};
+
+static struct clk *mtk_clk_register_pll(const struct mtk_pll_data *data,
+ void __iomem *base)
+{
+ struct mtk_clk_pll *pll;
+ struct clk_init_data init;
+ struct clk *clk;
+ const char *parent_name = "clk26m";
+
+ pr_debug("%s(): name: %s\n", __func__, data->name);
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->base_addr = base + data->reg;
+ pll->pwr_addr = base + data->pwr_reg;
+ pll->pd_addr = base + data->pd_reg;
+ pll->pcw_addr = base + data->pcw_reg;
+ if (data->tuner_reg)
+ pll->tuner_addr = base + data->tuner_reg;
+ pll->hw.init = &init;
+ pll->data = data;
+
+ init.name = data->name;
+ init.ops = &mtk_pll_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &pll->hw);
+
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+void __init mtk_clk_register_plls(struct device_node *node,
+ const struct mtk_pll_data *plls, int num_plls, struct clk_onecell_data *clk_data)
+{
+ void __iomem *base;
+ int r, i;
+ struct clk *clk;
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("%s(): ioremap failed\n", __func__);
+ return;
+ }
+
+ for (i = 0; i < num_plls; i++) {
+ const struct mtk_pll_data *pll = &plls[i];
+
+ clk = mtk_clk_register_pll(pll, base);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ pll->name, PTR_ERR(clk));
+ continue;
+ }
+
+ clk_data->clks[pll->id] = clk;
+ }
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [PATCH 3/6] clk: mediatek: Add reset controller support
2015-03-19 8:42 ` Sascha Hauer
@ 2015-03-19 8:42 ` Sascha Hauer
-1 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: Mike Turquette
Cc: Stephen Boyd, YH Chen, linux-kernel, Henry Chen, linux-mediatek,
kernel, Matthias Brugger, Yingjoe Chen, Eddie Huang,
linux-arm-kernel, Sascha Hauer
The pericfg and infracfg units also provide reset lines to several
other SoC internal units. Add support for the reset controller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mtk.h | 10 +++++
drivers/clk/mediatek/reset.c | 99 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 110 insertions(+)
create mode 100644 drivers/clk/mediatek/reset.c
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index c384e97..0b6f1c3 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -1 +1,2 @@
obj-y += clk-mtk.o clk-pll.o clk-gate.o
+obj-$(CONFIG_RESET_CONTROLLER) += reset.o
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
index 5aaba81..5a6b5dd 100644
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -152,4 +152,14 @@ void __init mtk_clk_register_plls(struct device_node *node,
const struct mtk_pll_data *plls, int num_plls,
struct clk_onecell_data *clk_data);
+#ifdef CONFIG_RESET_CONTROLLER
+void mtk_register_reset_controller(struct device_node *np,
+ unsigned int num_regs, int regofs);
+#else
+static inline void mtk_register_reset_controller(struct device_node *np,
+ unsigned int num_regs, int regofs)
+{
+}
+#endif
+
#endif /* __DRV_CLK_MTK_H */
diff --git a/drivers/clk/mediatek/reset.c b/drivers/clk/mediatek/reset.c
new file mode 100644
index 0000000..3a85a53
--- /dev/null
+++ b/drivers/clk/mediatek/reset.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+
+#include "clk-mtk.h"
+
+struct mtk_reset {
+ struct regmap *regmap;
+ int regofs;
+ struct reset_controller_dev rcdev;
+};
+
+static int mtk_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct mtk_reset *data = container_of(rcdev, struct mtk_reset, rcdev);
+
+ return regmap_update_bits(data->regmap, data->regofs + ((id / 32) << 2),
+ BIT(id % 32), ~0);
+}
+
+static int mtk_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct mtk_reset *data = container_of(rcdev, struct mtk_reset, rcdev);
+
+ return regmap_update_bits(data->regmap, data->regofs + ((id / 32) << 2),
+ BIT(id % 32), 0);
+}
+
+static int mtk_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ int ret;
+
+ ret = mtk_reset_assert(rcdev, id);
+ if (ret)
+ return ret;
+
+ return mtk_reset_deassert(rcdev, id);
+}
+
+static struct reset_control_ops mtk_reset_ops = {
+ .assert = mtk_reset_assert,
+ .deassert = mtk_reset_deassert,
+ .reset = mtk_reset,
+};
+
+void mtk_register_reset_controller(struct device_node *np,
+ unsigned int num_regs, int regofs)
+{
+ struct mtk_reset *data;
+ int ret;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(np);
+ if (IS_ERR(regmap)) {
+ pr_err("Cannot find regmap for %s: %ld\n", np->full_name,
+ PTR_ERR(regmap));
+ return;
+ }
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return;
+
+ data->regmap = regmap;
+ data->regofs = regofs;
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.nr_resets = num_regs * 32;
+ data->rcdev.ops = &mtk_reset_ops;
+ data->rcdev.of_node = np;
+
+ ret = reset_controller_register(&data->rcdev);
+ if (ret) {
+ pr_err("could not register reset controller: %d\n", ret);
+ kfree(data);
+ return;
+ }
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 53+ messages in thread* [PATCH 3/6] clk: mediatek: Add reset controller support
@ 2015-03-19 8:42 ` Sascha Hauer
0 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: linux-arm-kernel
The pericfg and infracfg units also provide reset lines to several
other SoC internal units. Add support for the reset controller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mtk.h | 10 +++++
drivers/clk/mediatek/reset.c | 99 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 110 insertions(+)
create mode 100644 drivers/clk/mediatek/reset.c
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index c384e97..0b6f1c3 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -1 +1,2 @@
obj-y += clk-mtk.o clk-pll.o clk-gate.o
+obj-$(CONFIG_RESET_CONTROLLER) += reset.o
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
index 5aaba81..5a6b5dd 100644
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -152,4 +152,14 @@ void __init mtk_clk_register_plls(struct device_node *node,
const struct mtk_pll_data *plls, int num_plls,
struct clk_onecell_data *clk_data);
+#ifdef CONFIG_RESET_CONTROLLER
+void mtk_register_reset_controller(struct device_node *np,
+ unsigned int num_regs, int regofs);
+#else
+static inline void mtk_register_reset_controller(struct device_node *np,
+ unsigned int num_regs, int regofs)
+{
+}
+#endif
+
#endif /* __DRV_CLK_MTK_H */
diff --git a/drivers/clk/mediatek/reset.c b/drivers/clk/mediatek/reset.c
new file mode 100644
index 0000000..3a85a53
--- /dev/null
+++ b/drivers/clk/mediatek/reset.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+
+#include "clk-mtk.h"
+
+struct mtk_reset {
+ struct regmap *regmap;
+ int regofs;
+ struct reset_controller_dev rcdev;
+};
+
+static int mtk_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct mtk_reset *data = container_of(rcdev, struct mtk_reset, rcdev);
+
+ return regmap_update_bits(data->regmap, data->regofs + ((id / 32) << 2),
+ BIT(id % 32), ~0);
+}
+
+static int mtk_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct mtk_reset *data = container_of(rcdev, struct mtk_reset, rcdev);
+
+ return regmap_update_bits(data->regmap, data->regofs + ((id / 32) << 2),
+ BIT(id % 32), 0);
+}
+
+static int mtk_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ int ret;
+
+ ret = mtk_reset_assert(rcdev, id);
+ if (ret)
+ return ret;
+
+ return mtk_reset_deassert(rcdev, id);
+}
+
+static struct reset_control_ops mtk_reset_ops = {
+ .assert = mtk_reset_assert,
+ .deassert = mtk_reset_deassert,
+ .reset = mtk_reset,
+};
+
+void mtk_register_reset_controller(struct device_node *np,
+ unsigned int num_regs, int regofs)
+{
+ struct mtk_reset *data;
+ int ret;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(np);
+ if (IS_ERR(regmap)) {
+ pr_err("Cannot find regmap for %s: %ld\n", np->full_name,
+ PTR_ERR(regmap));
+ return;
+ }
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return;
+
+ data->regmap = regmap;
+ data->regofs = regofs;
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.nr_resets = num_regs * 32;
+ data->rcdev.ops = &mtk_reset_ops;
+ data->rcdev.of_node = np;
+
+ ret = reset_controller_register(&data->rcdev);
+ if (ret) {
+ pr_err("could not register reset controller: %d\n", ret);
+ kfree(data);
+ return;
+ }
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 53+ messages in thread* Re: [PATCH 3/6] clk: mediatek: Add reset controller support
2015-03-19 8:42 ` Sascha Hauer
@ 2015-03-27 13:32 ` Matthias Brugger
-1 siblings, 0 replies; 53+ messages in thread
From: Matthias Brugger @ 2015-03-27 13:32 UTC (permalink / raw)
To: Sascha Hauer, Mike Turquette
Cc: Stephen Boyd, YH Chen, linux-kernel, Henry Chen, linux-mediatek,
kernel, Yingjoe Chen, Eddie Huang, linux-arm-kernel
On 19/03/15 09:42, Sascha Hauer wrote:
> The pericfg and infracfg units also provide reset lines to several
> other SoC internal units. Add support for the reset controller.
This messages is a bit confusing, could you explain better what the patch does and how this interacts with pericfg and infracfg?
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> drivers/clk/mediatek/Makefile | 1 +
> drivers/clk/mediatek/clk-mtk.h | 10 +++++
> drivers/clk/mediatek/reset.c | 99 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 110 insertions(+)
> create mode 100644 drivers/clk/mediatek/reset.c
>
> diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
> index c384e97..0b6f1c3 100644
> --- a/drivers/clk/mediatek/Makefile
> +++ b/drivers/clk/mediatek/Makefile
> @@ -1 +1,2 @@
> obj-y += clk-mtk.o clk-pll.o clk-gate.o
> +obj-$(CONFIG_RESET_CONTROLLER) += reset.o
> diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
> index 5aaba81..5a6b5dd 100644
> --- a/drivers/clk/mediatek/clk-mtk.h
> +++ b/drivers/clk/mediatek/clk-mtk.h
> @@ -152,4 +152,14 @@ void __init mtk_clk_register_plls(struct device_node *node,
> const struct mtk_pll_data *plls, int num_plls,
> struct clk_onecell_data *clk_data);
>
> +#ifdef CONFIG_RESET_CONTROLLER
> +void mtk_register_reset_controller(struct device_node *np,
> + unsigned int num_regs, int regofs);
> +#else
> +static inline void mtk_register_reset_controller(struct device_node *np,
> + unsigned int num_regs, int regofs)
> +{
> +}
> +#endif
> +
> #endif /* __DRV_CLK_MTK_H */
> diff --git a/drivers/clk/mediatek/reset.c b/drivers/clk/mediatek/reset.c
> new file mode 100644
> index 0000000..3a85a53
> --- /dev/null
> +++ b/drivers/clk/mediatek/reset.c
> @@ -0,0 +1,99 @@
> +/*
> + * Copyright (c) 2014 MediaTek Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Do we need this?
Cheers,
Matthias
^ permalink raw reply [flat|nested] 53+ messages in thread* [PATCH 3/6] clk: mediatek: Add reset controller support
@ 2015-03-27 13:32 ` Matthias Brugger
0 siblings, 0 replies; 53+ messages in thread
From: Matthias Brugger @ 2015-03-27 13:32 UTC (permalink / raw)
To: linux-arm-kernel
On 19/03/15 09:42, Sascha Hauer wrote:
> The pericfg and infracfg units also provide reset lines to several
> other SoC internal units. Add support for the reset controller.
This messages is a bit confusing, could you explain better what the patch does and how this interacts with pericfg and infracfg?
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> drivers/clk/mediatek/Makefile | 1 +
> drivers/clk/mediatek/clk-mtk.h | 10 +++++
> drivers/clk/mediatek/reset.c | 99 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 110 insertions(+)
> create mode 100644 drivers/clk/mediatek/reset.c
>
> diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
> index c384e97..0b6f1c3 100644
> --- a/drivers/clk/mediatek/Makefile
> +++ b/drivers/clk/mediatek/Makefile
> @@ -1 +1,2 @@
> obj-y += clk-mtk.o clk-pll.o clk-gate.o
> +obj-$(CONFIG_RESET_CONTROLLER) += reset.o
> diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
> index 5aaba81..5a6b5dd 100644
> --- a/drivers/clk/mediatek/clk-mtk.h
> +++ b/drivers/clk/mediatek/clk-mtk.h
> @@ -152,4 +152,14 @@ void __init mtk_clk_register_plls(struct device_node *node,
> const struct mtk_pll_data *plls, int num_plls,
> struct clk_onecell_data *clk_data);
>
> +#ifdef CONFIG_RESET_CONTROLLER
> +void mtk_register_reset_controller(struct device_node *np,
> + unsigned int num_regs, int regofs);
> +#else
> +static inline void mtk_register_reset_controller(struct device_node *np,
> + unsigned int num_regs, int regofs)
> +{
> +}
> +#endif
> +
> #endif /* __DRV_CLK_MTK_H */
> diff --git a/drivers/clk/mediatek/reset.c b/drivers/clk/mediatek/reset.c
> new file mode 100644
> index 0000000..3a85a53
> --- /dev/null
> +++ b/drivers/clk/mediatek/reset.c
> @@ -0,0 +1,99 @@
> +/*
> + * Copyright (c) 2014 MediaTek Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Do we need this?
Cheers,
Matthias
^ permalink raw reply [flat|nested] 53+ messages in thread
* [PATCH 4/6] clk: mediatek: Add basic clocks for Mediatek MT8135.
2015-03-19 8:42 ` Sascha Hauer
@ 2015-03-19 8:42 ` Sascha Hauer
-1 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: Mike Turquette
Cc: Stephen Boyd, YH Chen, linux-kernel, Henry Chen, linux-mediatek,
kernel, Matthias Brugger, Yingjoe Chen, Eddie Huang,
linux-arm-kernel, James Liao, Sascha Hauer
From: James Liao <jamesjj.liao@mediatek.com>
This patch adds basic clocks for MT8135, including TOPCKGEN, PLLs,
INFRA and PERI clocks.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mt8135.c | 640 +++++++++++++++++++++
include/dt-bindings/clock/mt8135-clk.h | 190 ++++++
.../dt-bindings/reset-controller/mt8135-resets.h | 64 +++
4 files changed, 895 insertions(+)
create mode 100644 drivers/clk/mediatek/clk-mt8135.c
create mode 100644 include/dt-bindings/clock/mt8135-clk.h
create mode 100644 include/dt-bindings/reset-controller/mt8135-resets.h
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 0b6f1c3..12ce576 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -1,2 +1,3 @@
obj-y += clk-mtk.o clk-pll.o clk-gate.o
obj-$(CONFIG_RESET_CONTROLLER) += reset.o
+obj-y += clk-mt8135.o
diff --git a/drivers/clk/mediatek/clk-mt8135.c b/drivers/clk/mediatek/clk-mt8135.c
new file mode 100644
index 0000000..a22f6fa
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8135.c
@@ -0,0 +1,640 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+#include <dt-bindings/clock/mt8135-clk.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+static DEFINE_SPINLOCK(lock);
+
+static const struct mtk_fixed_factor root_clk_alias[] __initconst = {
+ FACTOR(TOP_DSI0_LNTC_DSICLK, "dsi0_lntc_dsiclk", "clk_null", 1, 1),
+ FACTOR(TOP_HDMITX_CLKDIG_CTS, "hdmitx_clkdig_cts", "clk_null", 1, 1),
+ FACTOR(TOP_CLKPH_MCK, "clkph_mck", "clk_null", 1, 1),
+ FACTOR(TOP_CPUM_TCK_IN, "cpum_tck_in", "clk_null", 1, 1),
+};
+
+static const struct mtk_fixed_factor top_divs[] __initconst = {
+ FACTOR(TOP_MAINPLL_806M, "mainpll_806m", "mainpll", 1, 2),
+ FACTOR(TOP_MAINPLL_537P3M, "mainpll_537p3m", "mainpll", 1, 3),
+ FACTOR(TOP_MAINPLL_322P4M, "mainpll_322p4m", "mainpll", 1, 5),
+ FACTOR(TOP_MAINPLL_230P3M, "mainpll_230p3m", "mainpll", 1, 7),
+
+ FACTOR(TOP_UNIVPLL_624M, "univpll_624m", "univpll", 1, 2),
+ FACTOR(TOP_UNIVPLL_416M, "univpll_416m", "univpll", 1, 3),
+ FACTOR(TOP_UNIVPLL_249P6M, "univpll_249p6m", "univpll", 1, 5),
+ FACTOR(TOP_UNIVPLL_178P3M, "univpll_178p3m", "univpll", 1, 7),
+ FACTOR(TOP_UNIVPLL_48M, "univpll_48m", "univpll", 1, 26),
+
+ FACTOR(TOP_MMPLL_D2, "mmpll_d2", "mmpll", 1, 2),
+ FACTOR(TOP_MMPLL_D3, "mmpll_d3", "mmpll", 1, 3),
+ FACTOR(TOP_MMPLL_D5, "mmpll_d5", "mmpll", 1, 5),
+ FACTOR(TOP_MMPLL_D7, "mmpll_d7", "mmpll", 1, 7),
+ FACTOR(TOP_MMPLL_D4, "mmpll_d4", "mmpll_d2", 1, 2),
+ FACTOR(TOP_MMPLL_D6, "mmpll_d6", "mmpll_d3", 1, 2),
+
+ FACTOR(TOP_SYSPLL_D2, "syspll_d2", "mainpll_806m", 1, 1),
+ FACTOR(TOP_SYSPLL_D4, "syspll_d4", "mainpll_806m", 1, 2),
+ FACTOR(TOP_SYSPLL_D6, "syspll_d6", "mainpll_806m", 1, 3),
+ FACTOR(TOP_SYSPLL_D8, "syspll_d8", "mainpll_806m", 1, 4),
+ FACTOR(TOP_SYSPLL_D10, "syspll_d10", "mainpll_806m", 1, 5),
+ FACTOR(TOP_SYSPLL_D12, "syspll_d12", "mainpll_806m", 1, 6),
+ FACTOR(TOP_SYSPLL_D16, "syspll_d16", "mainpll_806m", 1, 8),
+ FACTOR(TOP_SYSPLL_D24, "syspll_d24", "mainpll_806m", 1, 12),
+
+ FACTOR(TOP_SYSPLL_D3, "syspll_d3", "mainpll_537p3m", 1, 1),
+
+ FACTOR(TOP_SYSPLL_D2P5, "syspll_d2p5", "mainpll_322p4m", 2, 1),
+ FACTOR(TOP_SYSPLL_D5, "syspll_d5", "mainpll_322p4m", 1, 1),
+
+ FACTOR(TOP_SYSPLL_D3P5, "syspll_d3p5", "mainpll_230p3m", 2, 1),
+
+ FACTOR(TOP_UNIVPLL1_D2, "univpll1_d2", "univpll_624m", 1, 2),
+ FACTOR(TOP_UNIVPLL1_D4, "univpll1_d4", "univpll_624m", 1, 4),
+ FACTOR(TOP_UNIVPLL1_D6, "univpll1_d6", "univpll_624m", 1, 6),
+ FACTOR(TOP_UNIVPLL1_D8, "univpll1_d8", "univpll_624m", 1, 8),
+ FACTOR(TOP_UNIVPLL1_D10, "univpll1_d10", "univpll_624m", 1, 10),
+
+ FACTOR(TOP_UNIVPLL2_D2, "univpll2_d2", "univpll_416m", 1, 2),
+ FACTOR(TOP_UNIVPLL2_D4, "univpll2_d4", "univpll_416m", 1, 4),
+ FACTOR(TOP_UNIVPLL2_D6, "univpll2_d6", "univpll_416m", 1, 6),
+ FACTOR(TOP_UNIVPLL2_D8, "univpll2_d8", "univpll_416m", 1, 8),
+
+ FACTOR(TOP_UNIVPLL_D3, "univpll_d3", "univpll_416m", 1, 1),
+ FACTOR(TOP_UNIVPLL_D5, "univpll_d5", "univpll_249p6m", 1, 1),
+ FACTOR(TOP_UNIVPLL_D7, "univpll_d7", "univpll_178p3m", 1, 1),
+ FACTOR(TOP_UNIVPLL_D10, "univpll_d10", "univpll_249p6m", 1, 5),
+ FACTOR(TOP_UNIVPLL_D26, "univpll_d26", "univpll_48m", 1, 1),
+
+ FACTOR(TOP_APLL_CK, "apll_ck", "audpll", 1, 1),
+ FACTOR(TOP_APLL_D4, "apll_d4", "audpll", 1, 4),
+ FACTOR(TOP_APLL_D8, "apll_d8", "audpll", 1, 8),
+ FACTOR(TOP_APLL_D16, "apll_d16", "audpll", 1, 16),
+ FACTOR(TOP_APLL_D24, "apll_d24", "audpll", 1, 24),
+
+ FACTOR(TOP_LVDSPLL_D2, "lvdspll_d2", "lvdspll", 1, 2),
+ FACTOR(TOP_LVDSPLL_D4, "lvdspll_d4", "lvdspll", 1, 4),
+ FACTOR(TOP_LVDSPLL_D8, "lvdspll_d8", "lvdspll", 1, 8),
+
+ FACTOR(TOP_LVDSTX_CLKDIG_CT, "lvdstx_clkdig_cts", "lvdspll", 1, 1),
+ FACTOR(TOP_VPLL_DPIX_CK, "vpll_dpix_ck", "lvdspll", 1, 1),
+
+ FACTOR(TOP_TVHDMI_H_CK, "tvhdmi_h_ck", "tvdpll", 1, 1),
+
+ FACTOR(TOP_HDMITX_CLKDIG_D2, "hdmitx_clkdig_d2", "hdmitx_clkdig_cts", 1, 2),
+ FACTOR(TOP_HDMITX_CLKDIG_D3, "hdmitx_clkdig_d3", "hdmitx_clkdig_cts", 1, 3),
+
+ FACTOR(TOP_TVHDMI_D2, "tvhdmi_d2", "tvhdmi_h_ck", 1, 2),
+ FACTOR(TOP_TVHDMI_D4, "tvhdmi_d4", "tvhdmi_h_ck", 1, 4),
+
+ FACTOR(TOP_MEMPLL_MCK_D4, "mempll_mck_d4", "clkph_mck", 1, 4),
+};
+
+static const char * const axi_parents[] __initconst = {
+ "clk26m",
+ "syspll_d3",
+ "syspll_d4",
+ "syspll_d6",
+ "univpll_d5",
+ "univpll2_d2",
+ "syspll_d3p5"
+};
+
+static const char * const smi_parents[] __initconst = {
+ "clk26m",
+ "clkph_mck",
+ "syspll_d2p5",
+ "syspll_d3",
+ "syspll_d8",
+ "univpll_d5",
+ "univpll1_d2",
+ "univpll1_d6",
+ "mmpll_d3",
+ "mmpll_d4",
+ "mmpll_d5",
+ "mmpll_d6",
+ "mmpll_d7",
+ "vdecpll",
+ "lvdspll"
+};
+
+static const char * const mfg_parents[] __initconst = {
+ "clk26m",
+ "univpll1_d4",
+ "syspll_d2",
+ "syspll_d2p5",
+ "syspll_d3",
+ "univpll_d5",
+ "univpll1_d2",
+ "mmpll_d2",
+ "mmpll_d3",
+ "mmpll_d4",
+ "mmpll_d5",
+ "mmpll_d6",
+ "mmpll_d7"
+};
+
+static const char * const irda_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d8",
+ "univpll1_d6"
+};
+
+static const char * const cam_parents[] __initconst = {
+ "clk26m",
+ "syspll_d3",
+ "syspll_d3p5",
+ "syspll_d4",
+ "univpll_d5",
+ "univpll2_d2",
+ "univpll_d7",
+ "univpll1_d4"
+};
+
+static const char * const aud_intbus_parents[] __initconst = {
+ "clk26m",
+ "syspll_d6",
+ "univpll_d10"
+};
+
+static const char * const jpg_parents[] __initconst = {
+ "clk26m",
+ "syspll_d5",
+ "syspll_d4",
+ "syspll_d3",
+ "univpll_d7",
+ "univpll2_d2",
+ "univpll_d5"
+};
+
+static const char * const disp_parents[] __initconst = {
+ "clk26m",
+ "syspll_d3p5",
+ "syspll_d3",
+ "univpll2_d2",
+ "univpll_d5",
+ "univpll1_d2",
+ "lvdspll",
+ "vdecpll"
+};
+
+static const char * const msdc30_parents[] __initconst = {
+ "clk26m",
+ "syspll_d6",
+ "syspll_d5",
+ "univpll1_d4",
+ "univpll2_d4",
+ "msdcpll"
+};
+
+static const char * const usb20_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d6",
+ "univpll1_d10"
+};
+
+static const char * const venc_parents[] __initconst = {
+ "clk26m",
+ "syspll_d3",
+ "syspll_d8",
+ "univpll_d5",
+ "univpll1_d6",
+ "mmpll_d4",
+ "mmpll_d5",
+ "mmpll_d6"
+};
+
+static const char * const spi_parents[] __initconst = {
+ "clk26m",
+ "syspll_d6",
+ "syspll_d8",
+ "syspll_d10",
+ "univpll1_d6",
+ "univpll1_d8"
+};
+
+static const char * const uart_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d8"
+};
+
+static const char * const mem_parents[] __initconst = {
+ "clk26m",
+ "clkph_mck"
+};
+
+static const char * const camtg_parents[] __initconst = {
+ "clk26m",
+ "univpll_d26",
+ "univpll1_d6",
+ "syspll_d16",
+ "syspll_d8"
+};
+
+static const char * const audio_parents[] __initconst = {
+ "clk26m",
+ "syspll_d24"
+};
+
+static const char * const fix_parents[] __initconst = {
+ "rtc32k",
+ "clk26m",
+ "univpll_d5",
+ "univpll_d7",
+ "univpll1_d2",
+ "univpll1_d4",
+ "univpll1_d6",
+ "univpll1_d8"
+};
+
+static const char * const vdec_parents[] __initconst = {
+ "clk26m",
+ "vdecpll",
+ "clkph_mck",
+ "syspll_d2p5",
+ "syspll_d3",
+ "syspll_d3p5",
+ "syspll_d4",
+ "syspll_d5",
+ "syspll_d6",
+ "syspll_d8",
+ "univpll1_d2",
+ "univpll2_d2",
+ "univpll_d7",
+ "univpll_d10",
+ "univpll2_d4",
+ "lvdspll"
+};
+
+static const char * const ddrphycfg_parents[] __initconst = {
+ "clk26m",
+ "axi_sel",
+ "syspll_d12"
+};
+
+static const char * const dpilvds_parents[] __initconst = {
+ "clk26m",
+ "lvdspll",
+ "lvdspll_d2",
+ "lvdspll_d4",
+ "lvdspll_d8"
+};
+
+static const char * const pmicspi_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d6",
+ "syspll_d8",
+ "syspll_d10",
+ "univpll1_d10",
+ "mempll_mck_d4",
+ "univpll_d26",
+ "syspll_d24"
+};
+
+static const char * const smi_mfg_as_parents[] __initconst = {
+ "clk26m",
+ "smi_sel",
+ "mfg_sel",
+ "mem_sel"
+};
+
+static const char * const gcpu_parents[] __initconst = {
+ "clk26m",
+ "syspll_d4",
+ "univpll_d7",
+ "syspll_d5",
+ "syspll_d6"
+};
+
+static const char * const dpi1_parents[] __initconst = {
+ "clk26m",
+ "tvhdmi_h_ck",
+ "tvhdmi_d2",
+ "tvhdmi_d4"
+};
+
+static const char * const cci_parents[] __initconst = {
+ "clk26m",
+ "mainpll_537p3m",
+ "univpll_d3",
+ "syspll_d2p5",
+ "syspll_d3",
+ "syspll_d5"
+};
+
+static const char * const apll_parents[] __initconst = {
+ "clk26m",
+ "apll_ck",
+ "apll_d4",
+ "apll_d8",
+ "apll_d16",
+ "apll_d24"
+};
+
+static const char * const hdmipll_parents[] __initconst = {
+ "clk26m",
+ "hdmitx_clkdig_cts",
+ "hdmitx_clkdig_d2",
+ "hdmitx_clkdig_d3"
+};
+
+static const struct mtk_composite top_muxes[] __initconst = {
+ /* CLK_CFG_0 */
+ MUX_GATE(TOP_AXI_SEL, "axi_sel", axi_parents,
+ 0x0140, 0, 3, INVALID_MUX_GATE_BIT),
+ MUX_GATE(TOP_SMI_SEL, "smi_sel", smi_parents, 0x0140, 8, 4, 15),
+ MUX_GATE(TOP_MFG_SEL, "mfg_sel", mfg_parents, 0x0140, 16, 4, 23),
+ MUX_GATE(TOP_IRDA_SEL, "irda_sel", irda_parents, 0x0140, 24, 2, 31),
+ /* CLK_CFG_1 */
+ MUX_GATE(TOP_CAM_SEL, "cam_sel", cam_parents, 0x0144, 0, 3, 7),
+ MUX_GATE(TOP_AUD_INTBUS_SEL, "aud_intbus_sel", aud_intbus_parents,
+ 0x0144, 8, 2, 15),
+ MUX_GATE(TOP_JPG_SEL, "jpg_sel", jpg_parents, 0x0144, 16, 3, 23),
+ MUX_GATE(TOP_DISP_SEL, "disp_sel", disp_parents, 0x0144, 24, 3, 31),
+ /* CLK_CFG_2 */
+ MUX_GATE(TOP_MSDC30_1_SEL, "msdc30_1_sel", msdc30_parents, 0x0148, 0, 3, 7),
+ MUX_GATE(TOP_MSDC30_2_SEL, "msdc30_2_sel", msdc30_parents, 0x0148, 8, 3, 15),
+ MUX_GATE(TOP_MSDC30_3_SEL, "msdc30_3_sel", msdc30_parents, 0x0148, 16, 3, 23),
+ MUX_GATE(TOP_MSDC30_4_SEL, "msdc30_4_sel", msdc30_parents, 0x0148, 24, 3, 31),
+ /* CLK_CFG_3 */
+ MUX_GATE(TOP_USB20_SEL, "usb20_sel", usb20_parents, 0x014c, 0, 2, 7),
+ /* CLK_CFG_4 */
+ MUX_GATE(TOP_VENC_SEL, "venc_sel", venc_parents, 0x0150, 8, 3, 15),
+ MUX_GATE(TOP_SPI_SEL, "spi_sel", spi_parents, 0x0150, 16, 3, 23),
+ MUX_GATE(TOP_UART_SEL, "uart_sel", uart_parents, 0x0150, 24, 2, 31),
+ /* CLK_CFG_6 */
+ MUX_GATE(TOP_MEM_SEL, "mem_sel", mem_parents, 0x0158, 0, 2, 7),
+ MUX_GATE(TOP_CAMTG_SEL, "camtg_sel", camtg_parents, 0x0158, 8, 3, 15),
+ MUX_GATE(TOP_AUDIO_SEL, "audio_sel", audio_parents, 0x0158, 24, 2, 31),
+ /* CLK_CFG_7 */
+ MUX_GATE(TOP_FIX_SEL, "fix_sel", fix_parents, 0x015c, 0, 3, 7),
+ MUX_GATE(TOP_VDEC_SEL, "vdec_sel", vdec_parents, 0x015c, 8, 4, 15),
+ MUX_GATE(TOP_DDRPHYCFG_SEL, "ddrphycfg_sel", ddrphycfg_parents,
+ 0x015c, 16, 2, 23),
+ MUX_GATE(TOP_DPILVDS_SEL, "dpilvds_sel", dpilvds_parents, 0x015c, 24, 3, 31),
+ /* CLK_CFG_8 */
+ MUX_GATE(TOP_PMICSPI_SEL, "pmicspi_sel", pmicspi_parents, 0x0164, 0, 3, 7),
+ MUX_GATE(TOP_MSDC30_0_SEL, "msdc30_0_sel", msdc30_parents, 0x0164, 8, 3, 15),
+ MUX_GATE(TOP_SMI_MFG_AS_SEL, "smi_mfg_as_sel", smi_mfg_as_parents,
+ 0x0164, 16, 2, 23),
+ MUX_GATE(TOP_GCPU_SEL, "gcpu_sel", gcpu_parents, 0x0164, 24, 3, 31),
+ /* CLK_CFG_9 */
+ MUX_GATE(TOP_DPI1_SEL, "dpi1_sel", dpi1_parents, 0x0168, 0, 2, 7),
+ MUX_GATE(TOP_CCI_SEL, "cci_sel", cci_parents, 0x0168, 8, 3, 15),
+ MUX_GATE(TOP_APLL_SEL, "apll_sel", apll_parents, 0x0168, 16, 3, 23),
+ MUX_GATE(TOP_HDMIPLL_SEL, "hdmipll_sel", hdmipll_parents, 0x0168, 24, 2, 31),
+};
+
+static void __init mtk_init_clk_topckgen(void __iomem *top_base,
+ struct clk_onecell_data *clk_data)
+{
+ int i;
+ struct clk *clk;
+
+ for (i = 0; i < ARRAY_SIZE(top_muxes); i++) {
+ const struct mtk_composite *mux = &top_muxes[i];
+
+ clk = mtk_clk_register_composite(mux, top_base, &lock);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ mux->name, PTR_ERR(clk));
+ continue;
+ }
+
+ if (clk_data)
+ clk_data->clks[mux->id] = clk;
+ }
+}
+
+static const struct mtk_gate_regs infra_cg_regs = {
+ .set_ofs = 0x0040,
+ .clr_ofs = 0x0044,
+ .sta_ofs = 0x0048,
+};
+
+#define GATE_ICG(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &infra_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate infra_clks[] __initconst = {
+ GATE_ICG(INFRA_PMIC_WRAP_CK, "pmic_wrap_ck", "axi_sel", 23),
+ GATE_ICG(INFRA_PMICSPI_CK, "pmicspi_ck", "pmicspi_sel", 22),
+ GATE_ICG(INFRA_CCIF1_AP_CTRL, "ccif1_ap_ctrl", "axi_sel", 21),
+ GATE_ICG(INFRA_CCIF0_AP_CTRL, "ccif0_ap_ctrl", "axi_sel", 20),
+ GATE_ICG(INFRA_KP_CK, "kp_ck", "axi_sel", 16),
+ GATE_ICG(INFRA_CPUM_CK, "cpum_ck", "cpum_tck_in", 15),
+ GATE_ICG(INFRA_M4U_CK, "m4u_ck", "mem_sel", 8),
+ GATE_ICG(INFRA_MFGAXI_CK, "mfgaxi_ck", "axi_sel", 7),
+ GATE_ICG(INFRA_DEVAPC_CK, "devapc_ck", "axi_sel", 6),
+ GATE_ICG(INFRA_AUDIO_CK, "audio_ck", "aud_intbus_sel", 5),
+ GATE_ICG(INFRA_MFG_BUS_CK, "mfg_bus_ck", "axi_sel", 2),
+ GATE_ICG(INFRA_SMI_CK, "smi_ck", "smi_sel", 1),
+ GATE_ICG(INFRA_DBGCLK_CK, "dbgclk_ck", "axi_sel", 0),
+};
+
+static const struct mtk_gate_regs peri0_cg_regs = {
+ .set_ofs = 0x0008,
+ .clr_ofs = 0x0010,
+ .sta_ofs = 0x0018,
+};
+
+static const struct mtk_gate_regs peri1_cg_regs = {
+ .set_ofs = 0x000c,
+ .clr_ofs = 0x0014,
+ .sta_ofs = 0x001c,
+};
+
+#define GATE_PERI0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &peri0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+#define GATE_PERI1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &peri1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate peri_clks[] __initconst = {
+ /* PERI0 */
+ GATE_PERI0(PERI_I2C5_CK, "i2c5_ck", "axi_sel", 31),
+ GATE_PERI0(PERI_I2C4_CK, "i2c4_ck", "axi_sel", 30),
+ GATE_PERI0(PERI_I2C3_CK, "i2c3_ck", "axi_sel", 29),
+ GATE_PERI0(PERI_I2C2_CK, "i2c2_ck", "axi_sel", 28),
+ GATE_PERI0(PERI_I2C1_CK, "i2c1_ck", "axi_sel", 27),
+ GATE_PERI0(PERI_I2C0_CK, "i2c0_ck", "axi_sel", 26),
+ GATE_PERI0(PERI_UART3_CK, "uart3_ck", "axi_sel", 25),
+ GATE_PERI0(PERI_UART2_CK, "uart2_ck", "axi_sel", 24),
+ GATE_PERI0(PERI_UART1_CK, "uart1_ck", "axi_sel", 23),
+ GATE_PERI0(PERI_UART0_CK, "uart0_ck", "axi_sel", 22),
+ GATE_PERI0(PERI_IRDA_CK, "irda_ck", "irda_sel", 21),
+ GATE_PERI0(PERI_NLI_CK, "nli_ck", "axi_sel", 20),
+ GATE_PERI0(PERI_MD_HIF_CK, "md_hif_ck", "axi_sel", 19),
+ GATE_PERI0(PERI_AP_HIF_CK, "ap_hif_ck", "axi_sel", 18),
+ GATE_PERI0(PERI_MSDC30_3_CK, "msdc30_3_ck", "msdc30_4_sel", 17),
+ GATE_PERI0(PERI_MSDC30_2_CK, "msdc30_2_ck", "msdc30_3_sel", 16),
+ GATE_PERI0(PERI_MSDC30_1_CK, "msdc30_1_ck", "msdc30_2_sel", 15),
+ GATE_PERI0(PERI_MSDC20_2_CK, "msdc20_2_ck", "msdc30_1_sel", 14),
+ GATE_PERI0(PERI_MSDC20_1_CK, "msdc20_1_ck", "msdc30_0_sel", 13),
+ GATE_PERI0(PERI_AP_DMA_CK, "ap_dma_ck", "axi_sel", 12),
+ GATE_PERI0(PERI_USB1_CK, "usb1_ck", "usb20_sel", 11),
+ GATE_PERI0(PERI_USB0_CK, "usb0_ck", "usb20_sel", 10),
+ GATE_PERI0(PERI_PWM_CK, "pwm_ck", "axi_sel", 9),
+ GATE_PERI0(PERI_PWM7_CK, "pwm7_ck", "axi_sel", 8),
+ GATE_PERI0(PERI_PWM6_CK, "pwm6_ck", "axi_sel", 7),
+ GATE_PERI0(PERI_PWM5_CK, "pwm5_ck", "axi_sel", 6),
+ GATE_PERI0(PERI_PWM4_CK, "pwm4_ck", "axi_sel", 5),
+ GATE_PERI0(PERI_PWM3_CK, "pwm3_ck", "axi_sel", 4),
+ GATE_PERI0(PERI_PWM2_CK, "pwm2_ck", "axi_sel", 3),
+ GATE_PERI0(PERI_PWM1_CK, "pwm1_ck", "axi_sel", 2),
+ GATE_PERI0(PERI_THERM_CK, "therm_ck", "axi_sel", 1),
+ GATE_PERI0(PERI_NFI_CK, "nfi_ck", "axi_sel", 0),
+ /* PERI1 */
+ GATE_PERI1(PERI_USBSLV_CK, "usbslv_ck", "axi_sel", 8),
+ GATE_PERI1(PERI_USB1_MCU_CK, "usb1_mcu_ck", "axi_sel", 7),
+ GATE_PERI1(PERI_USB0_MCU_CK, "usb0_mcu_ck", "axi_sel", 6),
+ GATE_PERI1(PERI_GCPU_CK, "gcpu_ck", "gcpu_sel", 5),
+ GATE_PERI1(PERI_FHCTL_CK, "fhctl_ck", "clk26m", 4),
+ GATE_PERI1(PERI_SPI1_CK, "spi1_ck", "spi_sel", 3),
+ GATE_PERI1(PERI_AUXADC_CK, "auxadc_ck", "clk26m", 2),
+ GATE_PERI1(PERI_PERI_PWRAP_CK, "peri_pwrap_ck", "axi_sel", 1),
+ GATE_PERI1(PERI_I2C6_CK, "i2c6_ck", "axi_sel", 0),
+};
+
+static void __init mtk_topckgen_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ void __iomem *base;
+ int r;
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("%s(): ioremap failed\n", __func__);
+ return;
+ }
+
+ clk_data = mtk_alloc_clk_data(TOP_NR_CLK);
+
+ mtk_clk_register_factors(root_clk_alias, ARRAY_SIZE(root_clk_alias), clk_data);
+ mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
+ mtk_init_clk_topckgen(base, clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+}
+CLK_OF_DECLARE(mtk_topckgen, "mediatek,mt8135-topckgen", mtk_topckgen_init);
+
+static void __init mtk_infrasys_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(INFRA_NR_CLK);
+
+ mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ mtk_register_reset_controller(node, 2, 0x30);
+}
+CLK_OF_DECLARE(mtk_infrasys, "mediatek,mt8135-infracfg", mtk_infrasys_init);
+
+static void __init mtk_pericfg_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(PERI_NR_CLK);
+
+ mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ mtk_register_reset_controller(node, 2, 0);
+}
+CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt8135-pericfg", mtk_pericfg_init);
+
+#define MT8135_PLL_FMAX (2000 * MHZ)
+#define CON0_MT8135_RST_BAR BIT(27)
+
+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift) { \
+ .id = _id, \
+ .name = _name, \
+ .reg = _reg, \
+ .pwr_reg = _pwr_reg, \
+ .en_mask = _en_mask, \
+ .flags = _flags, \
+ .rst_bar_mask = CON0_MT8135_RST_BAR, \
+ .fmax = MT8135_PLL_FMAX, \
+ .pcwbits = _pcwbits, \
+ .pd_reg = _pd_reg, \
+ .pd_shift = _pd_shift, \
+ .tuner_reg = _tuner_reg, \
+ .pcw_reg = _pcw_reg, \
+ .pcw_shift = _pcw_shift, \
+ }
+
+static const struct mtk_pll_data plls[] = {
+ PLL(APMIXED_ARMPLL1, "armpll1", 0x200, 0x218, 0x80000001, 0, 21, 0x204, 24, 0x0, 0x204, 0),
+ PLL(APMIXED_ARMPLL2, "armpll2", 0x2cc, 0x2e4, 0x80000001, 0, 21, 0x2d0, 24, 0x0, 0x2d0, 0),
+ PLL(APMIXED_MAINPLL, "mainpll", 0x21c, 0x234, 0xf0000001, HAVE_RST_BAR, 21, 0x21c, 6, 0x0, 0x220, 0),
+ PLL(APMIXED_UNIVPLL, "univpll", 0x238, 0x250, 0xf3000001, HAVE_RST_BAR, 7, 0x238, 6, 0x0, 0x238, 9),
+ PLL(APMIXED_MMPLL, "mmpll", 0x254, 0x26c, 0xf0000001, HAVE_RST_BAR, 21, 0x254, 6, 0x0, 0x258, 0),
+ PLL(APMIXED_MSDCPLL, "msdcpll", 0x278, 0x290, 0x80000001, 0, 21, 0x278, 6, 0x0, 0x27c, 0),
+ PLL(APMIXED_TVDPLL, "tvdpll", 0x294, 0x2ac, 0x80000001, 0, 31, 0x294, 6, 0x0, 0x298, 0),
+ PLL(APMIXED_LVDSPLL, "lvdspll", 0x2b0, 0x2c8, 0x80000001, 0, 21, 0x2b0, 6, 0x0, 0x2b4, 0),
+ PLL(APMIXED_AUDPLL, "audpll", 0x2e8, 0x300, 0x80000001, 0, 31, 0x2e8, 6, 0x2f8, 0x2ec, 0),
+ PLL(APMIXED_VDECPLL, "vdecpll", 0x304, 0x31c, 0x80000001, 0, 21, 0x2b0, 6, 0x0, 0x308, 0),
+};
+
+static void __init mtk_apmixedsys_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+
+ clk_data = mtk_alloc_clk_data(ARRAY_SIZE(plls));
+ if (!clk_data)
+ return;
+
+ mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
+}
+CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt8135-apmixedsys",
+ mtk_apmixedsys_init);
diff --git a/include/dt-bindings/clock/mt8135-clk.h b/include/dt-bindings/clock/mt8135-clk.h
new file mode 100644
index 0000000..8aea762
--- /dev/null
+++ b/include/dt-bindings/clock/mt8135-clk.h
@@ -0,0 +1,190 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_MT8135_H
+#define _DT_BINDINGS_CLK_MT8135_H
+
+/* TOPCKGEN */
+
+#define TOP_DSI0_LNTC_DSICLK 1
+#define TOP_HDMITX_CLKDIG_CTS 2
+#define TOP_CLKPH_MCK 3
+#define TOP_CPUM_TCK_IN 4
+#define TOP_MAINPLL_806M 5
+#define TOP_MAINPLL_537P3M 6
+#define TOP_MAINPLL_322P4M 7
+#define TOP_MAINPLL_230P3M 8
+#define TOP_UNIVPLL_624M 9
+#define TOP_UNIVPLL_416M 10
+#define TOP_UNIVPLL_249P6M 11
+#define TOP_UNIVPLL_178P3M 12
+#define TOP_UNIVPLL_48M 13
+#define TOP_MMPLL_D2 14
+#define TOP_MMPLL_D3 15
+#define TOP_MMPLL_D5 16
+#define TOP_MMPLL_D7 17
+#define TOP_MMPLL_D4 18
+#define TOP_MMPLL_D6 19
+#define TOP_SYSPLL_D2 20
+#define TOP_SYSPLL_D4 21
+#define TOP_SYSPLL_D6 22
+#define TOP_SYSPLL_D8 23
+#define TOP_SYSPLL_D10 24
+#define TOP_SYSPLL_D12 25
+#define TOP_SYSPLL_D16 26
+#define TOP_SYSPLL_D24 27
+#define TOP_SYSPLL_D3 28
+#define TOP_SYSPLL_D2P5 29
+#define TOP_SYSPLL_D5 30
+#define TOP_SYSPLL_D3P5 31
+#define TOP_UNIVPLL1_D2 32
+#define TOP_UNIVPLL1_D4 33
+#define TOP_UNIVPLL1_D6 34
+#define TOP_UNIVPLL1_D8 35
+#define TOP_UNIVPLL1_D10 36
+#define TOP_UNIVPLL2_D2 37
+#define TOP_UNIVPLL2_D4 38
+#define TOP_UNIVPLL2_D6 39
+#define TOP_UNIVPLL2_D8 40
+#define TOP_UNIVPLL_D3 41
+#define TOP_UNIVPLL_D5 42
+#define TOP_UNIVPLL_D7 43
+#define TOP_UNIVPLL_D10 44
+#define TOP_UNIVPLL_D26 45
+#define TOP_APLL_CK 46
+#define TOP_APLL_D4 47
+#define TOP_APLL_D8 48
+#define TOP_APLL_D16 49
+#define TOP_APLL_D24 50
+#define TOP_LVDSPLL_D2 51
+#define TOP_LVDSPLL_D4 52
+#define TOP_LVDSPLL_D8 53
+#define TOP_LVDSTX_CLKDIG_CT 54
+#define TOP_VPLL_DPIX_CK 55
+#define TOP_TVHDMI_H_CK 56
+#define TOP_HDMITX_CLKDIG_D2 57
+#define TOP_HDMITX_CLKDIG_D3 58
+#define TOP_TVHDMI_D2 59
+#define TOP_TVHDMI_D4 60
+#define TOP_MEMPLL_MCK_D4 61
+#define TOP_AXI_SEL 62
+#define TOP_SMI_SEL 63
+#define TOP_MFG_SEL 64
+#define TOP_IRDA_SEL 65
+#define TOP_CAM_SEL 66
+#define TOP_AUD_INTBUS_SEL 67
+#define TOP_JPG_SEL 68
+#define TOP_DISP_SEL 69
+#define TOP_MSDC30_1_SEL 70
+#define TOP_MSDC30_2_SEL 71
+#define TOP_MSDC30_3_SEL 72
+#define TOP_MSDC30_4_SEL 73
+#define TOP_USB20_SEL 74
+#define TOP_VENC_SEL 75
+#define TOP_SPI_SEL 76
+#define TOP_UART_SEL 77
+#define TOP_MEM_SEL 78
+#define TOP_CAMTG_SEL 79
+#define TOP_AUDIO_SEL 80
+#define TOP_FIX_SEL 81
+#define TOP_VDEC_SEL 82
+#define TOP_DDRPHYCFG_SEL 83
+#define TOP_DPILVDS_SEL 84
+#define TOP_PMICSPI_SEL 85
+#define TOP_MSDC30_0_SEL 86
+#define TOP_SMI_MFG_AS_SEL 87
+#define TOP_GCPU_SEL 88
+#define TOP_DPI1_SEL 89
+#define TOP_CCI_SEL 90
+#define TOP_APLL_SEL 91
+#define TOP_HDMIPLL_SEL 92
+#define TOP_NR_CLK 93
+
+/* APMIXED_SYS */
+
+#define APMIXED_ARMPLL1 1
+#define APMIXED_ARMPLL2 2
+#define APMIXED_MAINPLL 3
+#define APMIXED_UNIVPLL 4
+#define APMIXED_MMPLL 5
+#define APMIXED_MSDCPLL 6
+#define APMIXED_TVDPLL 7
+#define APMIXED_LVDSPLL 8
+#define APMIXED_AUDPLL 9
+#define APMIXED_VDECPLL 10
+#define APMIXED_NR_CLK 11
+
+/* INFRA_SYS */
+
+#define INFRA_PMIC_WRAP_CK 1
+#define INFRA_PMICSPI_CK 2
+#define INFRA_CCIF1_AP_CTRL 3
+#define INFRA_CCIF0_AP_CTRL 4
+#define INFRA_KP_CK 5
+#define INFRA_CPUM_CK 6
+#define INFRA_M4U_CK 7
+#define INFRA_MFGAXI_CK 8
+#define INFRA_DEVAPC_CK 9
+#define INFRA_AUDIO_CK 10
+#define INFRA_MFG_BUS_CK 11
+#define INFRA_SMI_CK 12
+#define INFRA_DBGCLK_CK 13
+#define INFRA_NR_CLK 14
+
+/* PERI_SYS */
+
+#define PERI_I2C5_CK 1
+#define PERI_I2C4_CK 2
+#define PERI_I2C3_CK 3
+#define PERI_I2C2_CK 4
+#define PERI_I2C1_CK 5
+#define PERI_I2C0_CK 6
+#define PERI_UART3_CK 7
+#define PERI_UART2_CK 8
+#define PERI_UART1_CK 9
+#define PERI_UART0_CK 10
+#define PERI_IRDA_CK 11
+#define PERI_NLI_CK 12
+#define PERI_MD_HIF_CK 13
+#define PERI_AP_HIF_CK 14
+#define PERI_MSDC30_3_CK 15
+#define PERI_MSDC30_2_CK 16
+#define PERI_MSDC30_1_CK 17
+#define PERI_MSDC20_2_CK 18
+#define PERI_MSDC20_1_CK 19
+#define PERI_AP_DMA_CK 20
+#define PERI_USB1_CK 21
+#define PERI_USB0_CK 22
+#define PERI_PWM_CK 23
+#define PERI_PWM7_CK 24
+#define PERI_PWM6_CK 25
+#define PERI_PWM5_CK 26
+#define PERI_PWM4_CK 27
+#define PERI_PWM3_CK 28
+#define PERI_PWM2_CK 29
+#define PERI_PWM1_CK 30
+#define PERI_THERM_CK 31
+#define PERI_NFI_CK 32
+#define PERI_USBSLV_CK 33
+#define PERI_USB1_MCU_CK 34
+#define PERI_USB0_MCU_CK 35
+#define PERI_GCPU_CK 36
+#define PERI_FHCTL_CK 37
+#define PERI_SPI1_CK 38
+#define PERI_AUXADC_CK 39
+#define PERI_PERI_PWRAP_CK 40
+#define PERI_I2C6_CK 41
+#define PERI_NR_CLK 42
+
+#endif /* _DT_BINDINGS_CLK_MT8135_H */
diff --git a/include/dt-bindings/reset-controller/mt8135-resets.h b/include/dt-bindings/reset-controller/mt8135-resets.h
new file mode 100644
index 0000000..1fb6295
--- /dev/null
+++ b/include/dt-bindings/reset-controller/mt8135-resets.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora Fu, MediaTek
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8135
+#define _DT_BINDINGS_RESET_CONTROLLER_MT8135
+
+/* INFRACFG resets */
+#define MT8135_INFRA_EMI_REG_RST 0
+#define MT8135_INFRA_DRAMC0_A0_RST 1
+#define MT8135_INFRA_CCIF0_RST 2
+#define MT8135_INFRA_APCIRQ_EINT_RST 3
+#define MT8135_INFRA_APXGPT_RST 4
+#define MT8135_INFRA_SCPSYS_RST 5
+#define MT8135_INFRA_CCIF1_RST 6
+#define MT8135_INFRA_PMIC_WRAP_RST 7
+#define MT8135_INFRA_KP_RST 8
+#define MT8135_INFRA_EMI_RST 32
+#define MT8135_INFRA_DRAMC0_RST 34
+#define MT8135_INFRA_SMI_RST 35
+#define MT8135_INFRA_M4U_RST 36
+
+/* PERICFG resets */
+#define MT8135_PERI_UART0_SW_RST 0
+#define MT8135_PERI_UART1_SW_RST 1
+#define MT8135_PERI_UART2_SW_RST 2
+#define MT8135_PERI_UART3_SW_RST 3
+#define MT8135_PERI_IRDA_SW_RST 4
+#define MT8135_PERI_PTP_SW_RST 5
+#define MT8135_PERI_AP_HIF_SW_RST 6
+#define MT8135_PERI_GPCU_SW_RST 7
+#define MT8135_PERI_MD_HIF_SW_RST 8
+#define MT8135_PERI_NLI_SW_RST 9
+#define MT8135_PERI_AUXADC_SW_RST 10
+#define MT8135_PERI_DMA_SW_RST 11
+#define MT8135_PERI_NFI_SW_RST 14
+#define MT8135_PERI_PWM_SW_RST 15
+#define MT8135_PERI_THERM_SW_RST 16
+#define MT8135_PERI_MSDC0_SW_RST 17
+#define MT8135_PERI_MSDC1_SW_RST 18
+#define MT8135_PERI_MSDC2_SW_RST 19
+#define MT8135_PERI_MSDC3_SW_RST 20
+#define MT8135_PERI_I2C0_SW_RST 22
+#define MT8135_PERI_I2C1_SW_RST 23
+#define MT8135_PERI_I2C2_SW_RST 24
+#define MT8135_PERI_I2C3_SW_RST 25
+#define MT8135_PERI_I2C4_SW_RST 26
+#define MT8135_PERI_I2C5_SW_RST 27
+#define MT8135_PERI_I2C6_SW_RST 28
+#define MT8135_PERI_USB_SW_RST 29
+#define MT8135_PERI_SPI1_SW_RST 33
+#define MT8135_PERI_PWRAP_BRIDGE_SW_RST 34
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8135 */
--
2.1.4
^ permalink raw reply related [flat|nested] 53+ messages in thread* [PATCH 4/6] clk: mediatek: Add basic clocks for Mediatek MT8135.
@ 2015-03-19 8:42 ` Sascha Hauer
0 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: linux-arm-kernel
From: James Liao <jamesjj.liao@mediatek.com>
This patch adds basic clocks for MT8135, including TOPCKGEN, PLLs,
INFRA and PERI clocks.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mt8135.c | 640 +++++++++++++++++++++
include/dt-bindings/clock/mt8135-clk.h | 190 ++++++
.../dt-bindings/reset-controller/mt8135-resets.h | 64 +++
4 files changed, 895 insertions(+)
create mode 100644 drivers/clk/mediatek/clk-mt8135.c
create mode 100644 include/dt-bindings/clock/mt8135-clk.h
create mode 100644 include/dt-bindings/reset-controller/mt8135-resets.h
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 0b6f1c3..12ce576 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -1,2 +1,3 @@
obj-y += clk-mtk.o clk-pll.o clk-gate.o
obj-$(CONFIG_RESET_CONTROLLER) += reset.o
+obj-y += clk-mt8135.o
diff --git a/drivers/clk/mediatek/clk-mt8135.c b/drivers/clk/mediatek/clk-mt8135.c
new file mode 100644
index 0000000..a22f6fa
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8135.c
@@ -0,0 +1,640 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+#include <dt-bindings/clock/mt8135-clk.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+static DEFINE_SPINLOCK(lock);
+
+static const struct mtk_fixed_factor root_clk_alias[] __initconst = {
+ FACTOR(TOP_DSI0_LNTC_DSICLK, "dsi0_lntc_dsiclk", "clk_null", 1, 1),
+ FACTOR(TOP_HDMITX_CLKDIG_CTS, "hdmitx_clkdig_cts", "clk_null", 1, 1),
+ FACTOR(TOP_CLKPH_MCK, "clkph_mck", "clk_null", 1, 1),
+ FACTOR(TOP_CPUM_TCK_IN, "cpum_tck_in", "clk_null", 1, 1),
+};
+
+static const struct mtk_fixed_factor top_divs[] __initconst = {
+ FACTOR(TOP_MAINPLL_806M, "mainpll_806m", "mainpll", 1, 2),
+ FACTOR(TOP_MAINPLL_537P3M, "mainpll_537p3m", "mainpll", 1, 3),
+ FACTOR(TOP_MAINPLL_322P4M, "mainpll_322p4m", "mainpll", 1, 5),
+ FACTOR(TOP_MAINPLL_230P3M, "mainpll_230p3m", "mainpll", 1, 7),
+
+ FACTOR(TOP_UNIVPLL_624M, "univpll_624m", "univpll", 1, 2),
+ FACTOR(TOP_UNIVPLL_416M, "univpll_416m", "univpll", 1, 3),
+ FACTOR(TOP_UNIVPLL_249P6M, "univpll_249p6m", "univpll", 1, 5),
+ FACTOR(TOP_UNIVPLL_178P3M, "univpll_178p3m", "univpll", 1, 7),
+ FACTOR(TOP_UNIVPLL_48M, "univpll_48m", "univpll", 1, 26),
+
+ FACTOR(TOP_MMPLL_D2, "mmpll_d2", "mmpll", 1, 2),
+ FACTOR(TOP_MMPLL_D3, "mmpll_d3", "mmpll", 1, 3),
+ FACTOR(TOP_MMPLL_D5, "mmpll_d5", "mmpll", 1, 5),
+ FACTOR(TOP_MMPLL_D7, "mmpll_d7", "mmpll", 1, 7),
+ FACTOR(TOP_MMPLL_D4, "mmpll_d4", "mmpll_d2", 1, 2),
+ FACTOR(TOP_MMPLL_D6, "mmpll_d6", "mmpll_d3", 1, 2),
+
+ FACTOR(TOP_SYSPLL_D2, "syspll_d2", "mainpll_806m", 1, 1),
+ FACTOR(TOP_SYSPLL_D4, "syspll_d4", "mainpll_806m", 1, 2),
+ FACTOR(TOP_SYSPLL_D6, "syspll_d6", "mainpll_806m", 1, 3),
+ FACTOR(TOP_SYSPLL_D8, "syspll_d8", "mainpll_806m", 1, 4),
+ FACTOR(TOP_SYSPLL_D10, "syspll_d10", "mainpll_806m", 1, 5),
+ FACTOR(TOP_SYSPLL_D12, "syspll_d12", "mainpll_806m", 1, 6),
+ FACTOR(TOP_SYSPLL_D16, "syspll_d16", "mainpll_806m", 1, 8),
+ FACTOR(TOP_SYSPLL_D24, "syspll_d24", "mainpll_806m", 1, 12),
+
+ FACTOR(TOP_SYSPLL_D3, "syspll_d3", "mainpll_537p3m", 1, 1),
+
+ FACTOR(TOP_SYSPLL_D2P5, "syspll_d2p5", "mainpll_322p4m", 2, 1),
+ FACTOR(TOP_SYSPLL_D5, "syspll_d5", "mainpll_322p4m", 1, 1),
+
+ FACTOR(TOP_SYSPLL_D3P5, "syspll_d3p5", "mainpll_230p3m", 2, 1),
+
+ FACTOR(TOP_UNIVPLL1_D2, "univpll1_d2", "univpll_624m", 1, 2),
+ FACTOR(TOP_UNIVPLL1_D4, "univpll1_d4", "univpll_624m", 1, 4),
+ FACTOR(TOP_UNIVPLL1_D6, "univpll1_d6", "univpll_624m", 1, 6),
+ FACTOR(TOP_UNIVPLL1_D8, "univpll1_d8", "univpll_624m", 1, 8),
+ FACTOR(TOP_UNIVPLL1_D10, "univpll1_d10", "univpll_624m", 1, 10),
+
+ FACTOR(TOP_UNIVPLL2_D2, "univpll2_d2", "univpll_416m", 1, 2),
+ FACTOR(TOP_UNIVPLL2_D4, "univpll2_d4", "univpll_416m", 1, 4),
+ FACTOR(TOP_UNIVPLL2_D6, "univpll2_d6", "univpll_416m", 1, 6),
+ FACTOR(TOP_UNIVPLL2_D8, "univpll2_d8", "univpll_416m", 1, 8),
+
+ FACTOR(TOP_UNIVPLL_D3, "univpll_d3", "univpll_416m", 1, 1),
+ FACTOR(TOP_UNIVPLL_D5, "univpll_d5", "univpll_249p6m", 1, 1),
+ FACTOR(TOP_UNIVPLL_D7, "univpll_d7", "univpll_178p3m", 1, 1),
+ FACTOR(TOP_UNIVPLL_D10, "univpll_d10", "univpll_249p6m", 1, 5),
+ FACTOR(TOP_UNIVPLL_D26, "univpll_d26", "univpll_48m", 1, 1),
+
+ FACTOR(TOP_APLL_CK, "apll_ck", "audpll", 1, 1),
+ FACTOR(TOP_APLL_D4, "apll_d4", "audpll", 1, 4),
+ FACTOR(TOP_APLL_D8, "apll_d8", "audpll", 1, 8),
+ FACTOR(TOP_APLL_D16, "apll_d16", "audpll", 1, 16),
+ FACTOR(TOP_APLL_D24, "apll_d24", "audpll", 1, 24),
+
+ FACTOR(TOP_LVDSPLL_D2, "lvdspll_d2", "lvdspll", 1, 2),
+ FACTOR(TOP_LVDSPLL_D4, "lvdspll_d4", "lvdspll", 1, 4),
+ FACTOR(TOP_LVDSPLL_D8, "lvdspll_d8", "lvdspll", 1, 8),
+
+ FACTOR(TOP_LVDSTX_CLKDIG_CT, "lvdstx_clkdig_cts", "lvdspll", 1, 1),
+ FACTOR(TOP_VPLL_DPIX_CK, "vpll_dpix_ck", "lvdspll", 1, 1),
+
+ FACTOR(TOP_TVHDMI_H_CK, "tvhdmi_h_ck", "tvdpll", 1, 1),
+
+ FACTOR(TOP_HDMITX_CLKDIG_D2, "hdmitx_clkdig_d2", "hdmitx_clkdig_cts", 1, 2),
+ FACTOR(TOP_HDMITX_CLKDIG_D3, "hdmitx_clkdig_d3", "hdmitx_clkdig_cts", 1, 3),
+
+ FACTOR(TOP_TVHDMI_D2, "tvhdmi_d2", "tvhdmi_h_ck", 1, 2),
+ FACTOR(TOP_TVHDMI_D4, "tvhdmi_d4", "tvhdmi_h_ck", 1, 4),
+
+ FACTOR(TOP_MEMPLL_MCK_D4, "mempll_mck_d4", "clkph_mck", 1, 4),
+};
+
+static const char * const axi_parents[] __initconst = {
+ "clk26m",
+ "syspll_d3",
+ "syspll_d4",
+ "syspll_d6",
+ "univpll_d5",
+ "univpll2_d2",
+ "syspll_d3p5"
+};
+
+static const char * const smi_parents[] __initconst = {
+ "clk26m",
+ "clkph_mck",
+ "syspll_d2p5",
+ "syspll_d3",
+ "syspll_d8",
+ "univpll_d5",
+ "univpll1_d2",
+ "univpll1_d6",
+ "mmpll_d3",
+ "mmpll_d4",
+ "mmpll_d5",
+ "mmpll_d6",
+ "mmpll_d7",
+ "vdecpll",
+ "lvdspll"
+};
+
+static const char * const mfg_parents[] __initconst = {
+ "clk26m",
+ "univpll1_d4",
+ "syspll_d2",
+ "syspll_d2p5",
+ "syspll_d3",
+ "univpll_d5",
+ "univpll1_d2",
+ "mmpll_d2",
+ "mmpll_d3",
+ "mmpll_d4",
+ "mmpll_d5",
+ "mmpll_d6",
+ "mmpll_d7"
+};
+
+static const char * const irda_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d8",
+ "univpll1_d6"
+};
+
+static const char * const cam_parents[] __initconst = {
+ "clk26m",
+ "syspll_d3",
+ "syspll_d3p5",
+ "syspll_d4",
+ "univpll_d5",
+ "univpll2_d2",
+ "univpll_d7",
+ "univpll1_d4"
+};
+
+static const char * const aud_intbus_parents[] __initconst = {
+ "clk26m",
+ "syspll_d6",
+ "univpll_d10"
+};
+
+static const char * const jpg_parents[] __initconst = {
+ "clk26m",
+ "syspll_d5",
+ "syspll_d4",
+ "syspll_d3",
+ "univpll_d7",
+ "univpll2_d2",
+ "univpll_d5"
+};
+
+static const char * const disp_parents[] __initconst = {
+ "clk26m",
+ "syspll_d3p5",
+ "syspll_d3",
+ "univpll2_d2",
+ "univpll_d5",
+ "univpll1_d2",
+ "lvdspll",
+ "vdecpll"
+};
+
+static const char * const msdc30_parents[] __initconst = {
+ "clk26m",
+ "syspll_d6",
+ "syspll_d5",
+ "univpll1_d4",
+ "univpll2_d4",
+ "msdcpll"
+};
+
+static const char * const usb20_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d6",
+ "univpll1_d10"
+};
+
+static const char * const venc_parents[] __initconst = {
+ "clk26m",
+ "syspll_d3",
+ "syspll_d8",
+ "univpll_d5",
+ "univpll1_d6",
+ "mmpll_d4",
+ "mmpll_d5",
+ "mmpll_d6"
+};
+
+static const char * const spi_parents[] __initconst = {
+ "clk26m",
+ "syspll_d6",
+ "syspll_d8",
+ "syspll_d10",
+ "univpll1_d6",
+ "univpll1_d8"
+};
+
+static const char * const uart_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d8"
+};
+
+static const char * const mem_parents[] __initconst = {
+ "clk26m",
+ "clkph_mck"
+};
+
+static const char * const camtg_parents[] __initconst = {
+ "clk26m",
+ "univpll_d26",
+ "univpll1_d6",
+ "syspll_d16",
+ "syspll_d8"
+};
+
+static const char * const audio_parents[] __initconst = {
+ "clk26m",
+ "syspll_d24"
+};
+
+static const char * const fix_parents[] __initconst = {
+ "rtc32k",
+ "clk26m",
+ "univpll_d5",
+ "univpll_d7",
+ "univpll1_d2",
+ "univpll1_d4",
+ "univpll1_d6",
+ "univpll1_d8"
+};
+
+static const char * const vdec_parents[] __initconst = {
+ "clk26m",
+ "vdecpll",
+ "clkph_mck",
+ "syspll_d2p5",
+ "syspll_d3",
+ "syspll_d3p5",
+ "syspll_d4",
+ "syspll_d5",
+ "syspll_d6",
+ "syspll_d8",
+ "univpll1_d2",
+ "univpll2_d2",
+ "univpll_d7",
+ "univpll_d10",
+ "univpll2_d4",
+ "lvdspll"
+};
+
+static const char * const ddrphycfg_parents[] __initconst = {
+ "clk26m",
+ "axi_sel",
+ "syspll_d12"
+};
+
+static const char * const dpilvds_parents[] __initconst = {
+ "clk26m",
+ "lvdspll",
+ "lvdspll_d2",
+ "lvdspll_d4",
+ "lvdspll_d8"
+};
+
+static const char * const pmicspi_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d6",
+ "syspll_d8",
+ "syspll_d10",
+ "univpll1_d10",
+ "mempll_mck_d4",
+ "univpll_d26",
+ "syspll_d24"
+};
+
+static const char * const smi_mfg_as_parents[] __initconst = {
+ "clk26m",
+ "smi_sel",
+ "mfg_sel",
+ "mem_sel"
+};
+
+static const char * const gcpu_parents[] __initconst = {
+ "clk26m",
+ "syspll_d4",
+ "univpll_d7",
+ "syspll_d5",
+ "syspll_d6"
+};
+
+static const char * const dpi1_parents[] __initconst = {
+ "clk26m",
+ "tvhdmi_h_ck",
+ "tvhdmi_d2",
+ "tvhdmi_d4"
+};
+
+static const char * const cci_parents[] __initconst = {
+ "clk26m",
+ "mainpll_537p3m",
+ "univpll_d3",
+ "syspll_d2p5",
+ "syspll_d3",
+ "syspll_d5"
+};
+
+static const char * const apll_parents[] __initconst = {
+ "clk26m",
+ "apll_ck",
+ "apll_d4",
+ "apll_d8",
+ "apll_d16",
+ "apll_d24"
+};
+
+static const char * const hdmipll_parents[] __initconst = {
+ "clk26m",
+ "hdmitx_clkdig_cts",
+ "hdmitx_clkdig_d2",
+ "hdmitx_clkdig_d3"
+};
+
+static const struct mtk_composite top_muxes[] __initconst = {
+ /* CLK_CFG_0 */
+ MUX_GATE(TOP_AXI_SEL, "axi_sel", axi_parents,
+ 0x0140, 0, 3, INVALID_MUX_GATE_BIT),
+ MUX_GATE(TOP_SMI_SEL, "smi_sel", smi_parents, 0x0140, 8, 4, 15),
+ MUX_GATE(TOP_MFG_SEL, "mfg_sel", mfg_parents, 0x0140, 16, 4, 23),
+ MUX_GATE(TOP_IRDA_SEL, "irda_sel", irda_parents, 0x0140, 24, 2, 31),
+ /* CLK_CFG_1 */
+ MUX_GATE(TOP_CAM_SEL, "cam_sel", cam_parents, 0x0144, 0, 3, 7),
+ MUX_GATE(TOP_AUD_INTBUS_SEL, "aud_intbus_sel", aud_intbus_parents,
+ 0x0144, 8, 2, 15),
+ MUX_GATE(TOP_JPG_SEL, "jpg_sel", jpg_parents, 0x0144, 16, 3, 23),
+ MUX_GATE(TOP_DISP_SEL, "disp_sel", disp_parents, 0x0144, 24, 3, 31),
+ /* CLK_CFG_2 */
+ MUX_GATE(TOP_MSDC30_1_SEL, "msdc30_1_sel", msdc30_parents, 0x0148, 0, 3, 7),
+ MUX_GATE(TOP_MSDC30_2_SEL, "msdc30_2_sel", msdc30_parents, 0x0148, 8, 3, 15),
+ MUX_GATE(TOP_MSDC30_3_SEL, "msdc30_3_sel", msdc30_parents, 0x0148, 16, 3, 23),
+ MUX_GATE(TOP_MSDC30_4_SEL, "msdc30_4_sel", msdc30_parents, 0x0148, 24, 3, 31),
+ /* CLK_CFG_3 */
+ MUX_GATE(TOP_USB20_SEL, "usb20_sel", usb20_parents, 0x014c, 0, 2, 7),
+ /* CLK_CFG_4 */
+ MUX_GATE(TOP_VENC_SEL, "venc_sel", venc_parents, 0x0150, 8, 3, 15),
+ MUX_GATE(TOP_SPI_SEL, "spi_sel", spi_parents, 0x0150, 16, 3, 23),
+ MUX_GATE(TOP_UART_SEL, "uart_sel", uart_parents, 0x0150, 24, 2, 31),
+ /* CLK_CFG_6 */
+ MUX_GATE(TOP_MEM_SEL, "mem_sel", mem_parents, 0x0158, 0, 2, 7),
+ MUX_GATE(TOP_CAMTG_SEL, "camtg_sel", camtg_parents, 0x0158, 8, 3, 15),
+ MUX_GATE(TOP_AUDIO_SEL, "audio_sel", audio_parents, 0x0158, 24, 2, 31),
+ /* CLK_CFG_7 */
+ MUX_GATE(TOP_FIX_SEL, "fix_sel", fix_parents, 0x015c, 0, 3, 7),
+ MUX_GATE(TOP_VDEC_SEL, "vdec_sel", vdec_parents, 0x015c, 8, 4, 15),
+ MUX_GATE(TOP_DDRPHYCFG_SEL, "ddrphycfg_sel", ddrphycfg_parents,
+ 0x015c, 16, 2, 23),
+ MUX_GATE(TOP_DPILVDS_SEL, "dpilvds_sel", dpilvds_parents, 0x015c, 24, 3, 31),
+ /* CLK_CFG_8 */
+ MUX_GATE(TOP_PMICSPI_SEL, "pmicspi_sel", pmicspi_parents, 0x0164, 0, 3, 7),
+ MUX_GATE(TOP_MSDC30_0_SEL, "msdc30_0_sel", msdc30_parents, 0x0164, 8, 3, 15),
+ MUX_GATE(TOP_SMI_MFG_AS_SEL, "smi_mfg_as_sel", smi_mfg_as_parents,
+ 0x0164, 16, 2, 23),
+ MUX_GATE(TOP_GCPU_SEL, "gcpu_sel", gcpu_parents, 0x0164, 24, 3, 31),
+ /* CLK_CFG_9 */
+ MUX_GATE(TOP_DPI1_SEL, "dpi1_sel", dpi1_parents, 0x0168, 0, 2, 7),
+ MUX_GATE(TOP_CCI_SEL, "cci_sel", cci_parents, 0x0168, 8, 3, 15),
+ MUX_GATE(TOP_APLL_SEL, "apll_sel", apll_parents, 0x0168, 16, 3, 23),
+ MUX_GATE(TOP_HDMIPLL_SEL, "hdmipll_sel", hdmipll_parents, 0x0168, 24, 2, 31),
+};
+
+static void __init mtk_init_clk_topckgen(void __iomem *top_base,
+ struct clk_onecell_data *clk_data)
+{
+ int i;
+ struct clk *clk;
+
+ for (i = 0; i < ARRAY_SIZE(top_muxes); i++) {
+ const struct mtk_composite *mux = &top_muxes[i];
+
+ clk = mtk_clk_register_composite(mux, top_base, &lock);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ mux->name, PTR_ERR(clk));
+ continue;
+ }
+
+ if (clk_data)
+ clk_data->clks[mux->id] = clk;
+ }
+}
+
+static const struct mtk_gate_regs infra_cg_regs = {
+ .set_ofs = 0x0040,
+ .clr_ofs = 0x0044,
+ .sta_ofs = 0x0048,
+};
+
+#define GATE_ICG(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &infra_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate infra_clks[] __initconst = {
+ GATE_ICG(INFRA_PMIC_WRAP_CK, "pmic_wrap_ck", "axi_sel", 23),
+ GATE_ICG(INFRA_PMICSPI_CK, "pmicspi_ck", "pmicspi_sel", 22),
+ GATE_ICG(INFRA_CCIF1_AP_CTRL, "ccif1_ap_ctrl", "axi_sel", 21),
+ GATE_ICG(INFRA_CCIF0_AP_CTRL, "ccif0_ap_ctrl", "axi_sel", 20),
+ GATE_ICG(INFRA_KP_CK, "kp_ck", "axi_sel", 16),
+ GATE_ICG(INFRA_CPUM_CK, "cpum_ck", "cpum_tck_in", 15),
+ GATE_ICG(INFRA_M4U_CK, "m4u_ck", "mem_sel", 8),
+ GATE_ICG(INFRA_MFGAXI_CK, "mfgaxi_ck", "axi_sel", 7),
+ GATE_ICG(INFRA_DEVAPC_CK, "devapc_ck", "axi_sel", 6),
+ GATE_ICG(INFRA_AUDIO_CK, "audio_ck", "aud_intbus_sel", 5),
+ GATE_ICG(INFRA_MFG_BUS_CK, "mfg_bus_ck", "axi_sel", 2),
+ GATE_ICG(INFRA_SMI_CK, "smi_ck", "smi_sel", 1),
+ GATE_ICG(INFRA_DBGCLK_CK, "dbgclk_ck", "axi_sel", 0),
+};
+
+static const struct mtk_gate_regs peri0_cg_regs = {
+ .set_ofs = 0x0008,
+ .clr_ofs = 0x0010,
+ .sta_ofs = 0x0018,
+};
+
+static const struct mtk_gate_regs peri1_cg_regs = {
+ .set_ofs = 0x000c,
+ .clr_ofs = 0x0014,
+ .sta_ofs = 0x001c,
+};
+
+#define GATE_PERI0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &peri0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+#define GATE_PERI1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &peri1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate peri_clks[] __initconst = {
+ /* PERI0 */
+ GATE_PERI0(PERI_I2C5_CK, "i2c5_ck", "axi_sel", 31),
+ GATE_PERI0(PERI_I2C4_CK, "i2c4_ck", "axi_sel", 30),
+ GATE_PERI0(PERI_I2C3_CK, "i2c3_ck", "axi_sel", 29),
+ GATE_PERI0(PERI_I2C2_CK, "i2c2_ck", "axi_sel", 28),
+ GATE_PERI0(PERI_I2C1_CK, "i2c1_ck", "axi_sel", 27),
+ GATE_PERI0(PERI_I2C0_CK, "i2c0_ck", "axi_sel", 26),
+ GATE_PERI0(PERI_UART3_CK, "uart3_ck", "axi_sel", 25),
+ GATE_PERI0(PERI_UART2_CK, "uart2_ck", "axi_sel", 24),
+ GATE_PERI0(PERI_UART1_CK, "uart1_ck", "axi_sel", 23),
+ GATE_PERI0(PERI_UART0_CK, "uart0_ck", "axi_sel", 22),
+ GATE_PERI0(PERI_IRDA_CK, "irda_ck", "irda_sel", 21),
+ GATE_PERI0(PERI_NLI_CK, "nli_ck", "axi_sel", 20),
+ GATE_PERI0(PERI_MD_HIF_CK, "md_hif_ck", "axi_sel", 19),
+ GATE_PERI0(PERI_AP_HIF_CK, "ap_hif_ck", "axi_sel", 18),
+ GATE_PERI0(PERI_MSDC30_3_CK, "msdc30_3_ck", "msdc30_4_sel", 17),
+ GATE_PERI0(PERI_MSDC30_2_CK, "msdc30_2_ck", "msdc30_3_sel", 16),
+ GATE_PERI0(PERI_MSDC30_1_CK, "msdc30_1_ck", "msdc30_2_sel", 15),
+ GATE_PERI0(PERI_MSDC20_2_CK, "msdc20_2_ck", "msdc30_1_sel", 14),
+ GATE_PERI0(PERI_MSDC20_1_CK, "msdc20_1_ck", "msdc30_0_sel", 13),
+ GATE_PERI0(PERI_AP_DMA_CK, "ap_dma_ck", "axi_sel", 12),
+ GATE_PERI0(PERI_USB1_CK, "usb1_ck", "usb20_sel", 11),
+ GATE_PERI0(PERI_USB0_CK, "usb0_ck", "usb20_sel", 10),
+ GATE_PERI0(PERI_PWM_CK, "pwm_ck", "axi_sel", 9),
+ GATE_PERI0(PERI_PWM7_CK, "pwm7_ck", "axi_sel", 8),
+ GATE_PERI0(PERI_PWM6_CK, "pwm6_ck", "axi_sel", 7),
+ GATE_PERI0(PERI_PWM5_CK, "pwm5_ck", "axi_sel", 6),
+ GATE_PERI0(PERI_PWM4_CK, "pwm4_ck", "axi_sel", 5),
+ GATE_PERI0(PERI_PWM3_CK, "pwm3_ck", "axi_sel", 4),
+ GATE_PERI0(PERI_PWM2_CK, "pwm2_ck", "axi_sel", 3),
+ GATE_PERI0(PERI_PWM1_CK, "pwm1_ck", "axi_sel", 2),
+ GATE_PERI0(PERI_THERM_CK, "therm_ck", "axi_sel", 1),
+ GATE_PERI0(PERI_NFI_CK, "nfi_ck", "axi_sel", 0),
+ /* PERI1 */
+ GATE_PERI1(PERI_USBSLV_CK, "usbslv_ck", "axi_sel", 8),
+ GATE_PERI1(PERI_USB1_MCU_CK, "usb1_mcu_ck", "axi_sel", 7),
+ GATE_PERI1(PERI_USB0_MCU_CK, "usb0_mcu_ck", "axi_sel", 6),
+ GATE_PERI1(PERI_GCPU_CK, "gcpu_ck", "gcpu_sel", 5),
+ GATE_PERI1(PERI_FHCTL_CK, "fhctl_ck", "clk26m", 4),
+ GATE_PERI1(PERI_SPI1_CK, "spi1_ck", "spi_sel", 3),
+ GATE_PERI1(PERI_AUXADC_CK, "auxadc_ck", "clk26m", 2),
+ GATE_PERI1(PERI_PERI_PWRAP_CK, "peri_pwrap_ck", "axi_sel", 1),
+ GATE_PERI1(PERI_I2C6_CK, "i2c6_ck", "axi_sel", 0),
+};
+
+static void __init mtk_topckgen_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ void __iomem *base;
+ int r;
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("%s(): ioremap failed\n", __func__);
+ return;
+ }
+
+ clk_data = mtk_alloc_clk_data(TOP_NR_CLK);
+
+ mtk_clk_register_factors(root_clk_alias, ARRAY_SIZE(root_clk_alias), clk_data);
+ mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
+ mtk_init_clk_topckgen(base, clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+}
+CLK_OF_DECLARE(mtk_topckgen, "mediatek,mt8135-topckgen", mtk_topckgen_init);
+
+static void __init mtk_infrasys_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(INFRA_NR_CLK);
+
+ mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ mtk_register_reset_controller(node, 2, 0x30);
+}
+CLK_OF_DECLARE(mtk_infrasys, "mediatek,mt8135-infracfg", mtk_infrasys_init);
+
+static void __init mtk_pericfg_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(PERI_NR_CLK);
+
+ mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ mtk_register_reset_controller(node, 2, 0);
+}
+CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt8135-pericfg", mtk_pericfg_init);
+
+#define MT8135_PLL_FMAX (2000 * MHZ)
+#define CON0_MT8135_RST_BAR BIT(27)
+
+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift) { \
+ .id = _id, \
+ .name = _name, \
+ .reg = _reg, \
+ .pwr_reg = _pwr_reg, \
+ .en_mask = _en_mask, \
+ .flags = _flags, \
+ .rst_bar_mask = CON0_MT8135_RST_BAR, \
+ .fmax = MT8135_PLL_FMAX, \
+ .pcwbits = _pcwbits, \
+ .pd_reg = _pd_reg, \
+ .pd_shift = _pd_shift, \
+ .tuner_reg = _tuner_reg, \
+ .pcw_reg = _pcw_reg, \
+ .pcw_shift = _pcw_shift, \
+ }
+
+static const struct mtk_pll_data plls[] = {
+ PLL(APMIXED_ARMPLL1, "armpll1", 0x200, 0x218, 0x80000001, 0, 21, 0x204, 24, 0x0, 0x204, 0),
+ PLL(APMIXED_ARMPLL2, "armpll2", 0x2cc, 0x2e4, 0x80000001, 0, 21, 0x2d0, 24, 0x0, 0x2d0, 0),
+ PLL(APMIXED_MAINPLL, "mainpll", 0x21c, 0x234, 0xf0000001, HAVE_RST_BAR, 21, 0x21c, 6, 0x0, 0x220, 0),
+ PLL(APMIXED_UNIVPLL, "univpll", 0x238, 0x250, 0xf3000001, HAVE_RST_BAR, 7, 0x238, 6, 0x0, 0x238, 9),
+ PLL(APMIXED_MMPLL, "mmpll", 0x254, 0x26c, 0xf0000001, HAVE_RST_BAR, 21, 0x254, 6, 0x0, 0x258, 0),
+ PLL(APMIXED_MSDCPLL, "msdcpll", 0x278, 0x290, 0x80000001, 0, 21, 0x278, 6, 0x0, 0x27c, 0),
+ PLL(APMIXED_TVDPLL, "tvdpll", 0x294, 0x2ac, 0x80000001, 0, 31, 0x294, 6, 0x0, 0x298, 0),
+ PLL(APMIXED_LVDSPLL, "lvdspll", 0x2b0, 0x2c8, 0x80000001, 0, 21, 0x2b0, 6, 0x0, 0x2b4, 0),
+ PLL(APMIXED_AUDPLL, "audpll", 0x2e8, 0x300, 0x80000001, 0, 31, 0x2e8, 6, 0x2f8, 0x2ec, 0),
+ PLL(APMIXED_VDECPLL, "vdecpll", 0x304, 0x31c, 0x80000001, 0, 21, 0x2b0, 6, 0x0, 0x308, 0),
+};
+
+static void __init mtk_apmixedsys_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+
+ clk_data = mtk_alloc_clk_data(ARRAY_SIZE(plls));
+ if (!clk_data)
+ return;
+
+ mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
+}
+CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt8135-apmixedsys",
+ mtk_apmixedsys_init);
diff --git a/include/dt-bindings/clock/mt8135-clk.h b/include/dt-bindings/clock/mt8135-clk.h
new file mode 100644
index 0000000..8aea762
--- /dev/null
+++ b/include/dt-bindings/clock/mt8135-clk.h
@@ -0,0 +1,190 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_MT8135_H
+#define _DT_BINDINGS_CLK_MT8135_H
+
+/* TOPCKGEN */
+
+#define TOP_DSI0_LNTC_DSICLK 1
+#define TOP_HDMITX_CLKDIG_CTS 2
+#define TOP_CLKPH_MCK 3
+#define TOP_CPUM_TCK_IN 4
+#define TOP_MAINPLL_806M 5
+#define TOP_MAINPLL_537P3M 6
+#define TOP_MAINPLL_322P4M 7
+#define TOP_MAINPLL_230P3M 8
+#define TOP_UNIVPLL_624M 9
+#define TOP_UNIVPLL_416M 10
+#define TOP_UNIVPLL_249P6M 11
+#define TOP_UNIVPLL_178P3M 12
+#define TOP_UNIVPLL_48M 13
+#define TOP_MMPLL_D2 14
+#define TOP_MMPLL_D3 15
+#define TOP_MMPLL_D5 16
+#define TOP_MMPLL_D7 17
+#define TOP_MMPLL_D4 18
+#define TOP_MMPLL_D6 19
+#define TOP_SYSPLL_D2 20
+#define TOP_SYSPLL_D4 21
+#define TOP_SYSPLL_D6 22
+#define TOP_SYSPLL_D8 23
+#define TOP_SYSPLL_D10 24
+#define TOP_SYSPLL_D12 25
+#define TOP_SYSPLL_D16 26
+#define TOP_SYSPLL_D24 27
+#define TOP_SYSPLL_D3 28
+#define TOP_SYSPLL_D2P5 29
+#define TOP_SYSPLL_D5 30
+#define TOP_SYSPLL_D3P5 31
+#define TOP_UNIVPLL1_D2 32
+#define TOP_UNIVPLL1_D4 33
+#define TOP_UNIVPLL1_D6 34
+#define TOP_UNIVPLL1_D8 35
+#define TOP_UNIVPLL1_D10 36
+#define TOP_UNIVPLL2_D2 37
+#define TOP_UNIVPLL2_D4 38
+#define TOP_UNIVPLL2_D6 39
+#define TOP_UNIVPLL2_D8 40
+#define TOP_UNIVPLL_D3 41
+#define TOP_UNIVPLL_D5 42
+#define TOP_UNIVPLL_D7 43
+#define TOP_UNIVPLL_D10 44
+#define TOP_UNIVPLL_D26 45
+#define TOP_APLL_CK 46
+#define TOP_APLL_D4 47
+#define TOP_APLL_D8 48
+#define TOP_APLL_D16 49
+#define TOP_APLL_D24 50
+#define TOP_LVDSPLL_D2 51
+#define TOP_LVDSPLL_D4 52
+#define TOP_LVDSPLL_D8 53
+#define TOP_LVDSTX_CLKDIG_CT 54
+#define TOP_VPLL_DPIX_CK 55
+#define TOP_TVHDMI_H_CK 56
+#define TOP_HDMITX_CLKDIG_D2 57
+#define TOP_HDMITX_CLKDIG_D3 58
+#define TOP_TVHDMI_D2 59
+#define TOP_TVHDMI_D4 60
+#define TOP_MEMPLL_MCK_D4 61
+#define TOP_AXI_SEL 62
+#define TOP_SMI_SEL 63
+#define TOP_MFG_SEL 64
+#define TOP_IRDA_SEL 65
+#define TOP_CAM_SEL 66
+#define TOP_AUD_INTBUS_SEL 67
+#define TOP_JPG_SEL 68
+#define TOP_DISP_SEL 69
+#define TOP_MSDC30_1_SEL 70
+#define TOP_MSDC30_2_SEL 71
+#define TOP_MSDC30_3_SEL 72
+#define TOP_MSDC30_4_SEL 73
+#define TOP_USB20_SEL 74
+#define TOP_VENC_SEL 75
+#define TOP_SPI_SEL 76
+#define TOP_UART_SEL 77
+#define TOP_MEM_SEL 78
+#define TOP_CAMTG_SEL 79
+#define TOP_AUDIO_SEL 80
+#define TOP_FIX_SEL 81
+#define TOP_VDEC_SEL 82
+#define TOP_DDRPHYCFG_SEL 83
+#define TOP_DPILVDS_SEL 84
+#define TOP_PMICSPI_SEL 85
+#define TOP_MSDC30_0_SEL 86
+#define TOP_SMI_MFG_AS_SEL 87
+#define TOP_GCPU_SEL 88
+#define TOP_DPI1_SEL 89
+#define TOP_CCI_SEL 90
+#define TOP_APLL_SEL 91
+#define TOP_HDMIPLL_SEL 92
+#define TOP_NR_CLK 93
+
+/* APMIXED_SYS */
+
+#define APMIXED_ARMPLL1 1
+#define APMIXED_ARMPLL2 2
+#define APMIXED_MAINPLL 3
+#define APMIXED_UNIVPLL 4
+#define APMIXED_MMPLL 5
+#define APMIXED_MSDCPLL 6
+#define APMIXED_TVDPLL 7
+#define APMIXED_LVDSPLL 8
+#define APMIXED_AUDPLL 9
+#define APMIXED_VDECPLL 10
+#define APMIXED_NR_CLK 11
+
+/* INFRA_SYS */
+
+#define INFRA_PMIC_WRAP_CK 1
+#define INFRA_PMICSPI_CK 2
+#define INFRA_CCIF1_AP_CTRL 3
+#define INFRA_CCIF0_AP_CTRL 4
+#define INFRA_KP_CK 5
+#define INFRA_CPUM_CK 6
+#define INFRA_M4U_CK 7
+#define INFRA_MFGAXI_CK 8
+#define INFRA_DEVAPC_CK 9
+#define INFRA_AUDIO_CK 10
+#define INFRA_MFG_BUS_CK 11
+#define INFRA_SMI_CK 12
+#define INFRA_DBGCLK_CK 13
+#define INFRA_NR_CLK 14
+
+/* PERI_SYS */
+
+#define PERI_I2C5_CK 1
+#define PERI_I2C4_CK 2
+#define PERI_I2C3_CK 3
+#define PERI_I2C2_CK 4
+#define PERI_I2C1_CK 5
+#define PERI_I2C0_CK 6
+#define PERI_UART3_CK 7
+#define PERI_UART2_CK 8
+#define PERI_UART1_CK 9
+#define PERI_UART0_CK 10
+#define PERI_IRDA_CK 11
+#define PERI_NLI_CK 12
+#define PERI_MD_HIF_CK 13
+#define PERI_AP_HIF_CK 14
+#define PERI_MSDC30_3_CK 15
+#define PERI_MSDC30_2_CK 16
+#define PERI_MSDC30_1_CK 17
+#define PERI_MSDC20_2_CK 18
+#define PERI_MSDC20_1_CK 19
+#define PERI_AP_DMA_CK 20
+#define PERI_USB1_CK 21
+#define PERI_USB0_CK 22
+#define PERI_PWM_CK 23
+#define PERI_PWM7_CK 24
+#define PERI_PWM6_CK 25
+#define PERI_PWM5_CK 26
+#define PERI_PWM4_CK 27
+#define PERI_PWM3_CK 28
+#define PERI_PWM2_CK 29
+#define PERI_PWM1_CK 30
+#define PERI_THERM_CK 31
+#define PERI_NFI_CK 32
+#define PERI_USBSLV_CK 33
+#define PERI_USB1_MCU_CK 34
+#define PERI_USB0_MCU_CK 35
+#define PERI_GCPU_CK 36
+#define PERI_FHCTL_CK 37
+#define PERI_SPI1_CK 38
+#define PERI_AUXADC_CK 39
+#define PERI_PERI_PWRAP_CK 40
+#define PERI_I2C6_CK 41
+#define PERI_NR_CLK 42
+
+#endif /* _DT_BINDINGS_CLK_MT8135_H */
diff --git a/include/dt-bindings/reset-controller/mt8135-resets.h b/include/dt-bindings/reset-controller/mt8135-resets.h
new file mode 100644
index 0000000..1fb6295
--- /dev/null
+++ b/include/dt-bindings/reset-controller/mt8135-resets.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora Fu, MediaTek
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8135
+#define _DT_BINDINGS_RESET_CONTROLLER_MT8135
+
+/* INFRACFG resets */
+#define MT8135_INFRA_EMI_REG_RST 0
+#define MT8135_INFRA_DRAMC0_A0_RST 1
+#define MT8135_INFRA_CCIF0_RST 2
+#define MT8135_INFRA_APCIRQ_EINT_RST 3
+#define MT8135_INFRA_APXGPT_RST 4
+#define MT8135_INFRA_SCPSYS_RST 5
+#define MT8135_INFRA_CCIF1_RST 6
+#define MT8135_INFRA_PMIC_WRAP_RST 7
+#define MT8135_INFRA_KP_RST 8
+#define MT8135_INFRA_EMI_RST 32
+#define MT8135_INFRA_DRAMC0_RST 34
+#define MT8135_INFRA_SMI_RST 35
+#define MT8135_INFRA_M4U_RST 36
+
+/* PERICFG resets */
+#define MT8135_PERI_UART0_SW_RST 0
+#define MT8135_PERI_UART1_SW_RST 1
+#define MT8135_PERI_UART2_SW_RST 2
+#define MT8135_PERI_UART3_SW_RST 3
+#define MT8135_PERI_IRDA_SW_RST 4
+#define MT8135_PERI_PTP_SW_RST 5
+#define MT8135_PERI_AP_HIF_SW_RST 6
+#define MT8135_PERI_GPCU_SW_RST 7
+#define MT8135_PERI_MD_HIF_SW_RST 8
+#define MT8135_PERI_NLI_SW_RST 9
+#define MT8135_PERI_AUXADC_SW_RST 10
+#define MT8135_PERI_DMA_SW_RST 11
+#define MT8135_PERI_NFI_SW_RST 14
+#define MT8135_PERI_PWM_SW_RST 15
+#define MT8135_PERI_THERM_SW_RST 16
+#define MT8135_PERI_MSDC0_SW_RST 17
+#define MT8135_PERI_MSDC1_SW_RST 18
+#define MT8135_PERI_MSDC2_SW_RST 19
+#define MT8135_PERI_MSDC3_SW_RST 20
+#define MT8135_PERI_I2C0_SW_RST 22
+#define MT8135_PERI_I2C1_SW_RST 23
+#define MT8135_PERI_I2C2_SW_RST 24
+#define MT8135_PERI_I2C3_SW_RST 25
+#define MT8135_PERI_I2C4_SW_RST 26
+#define MT8135_PERI_I2C5_SW_RST 27
+#define MT8135_PERI_I2C6_SW_RST 28
+#define MT8135_PERI_USB_SW_RST 29
+#define MT8135_PERI_SPI1_SW_RST 33
+#define MT8135_PERI_PWRAP_BRIDGE_SW_RST 34
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8135 */
--
2.1.4
^ permalink raw reply related [flat|nested] 53+ messages in thread* Re: [PATCH 4/6] clk: mediatek: Add basic clocks for Mediatek MT8135.
2015-03-19 8:42 ` Sascha Hauer
@ 2015-03-27 7:39 ` Stephen Boyd
-1 siblings, 0 replies; 53+ messages in thread
From: Stephen Boyd @ 2015-03-27 7:39 UTC (permalink / raw)
To: Sascha Hauer
Cc: Mike Turquette, YH Chen, linux-kernel, Henry Chen,
linux-mediatek, kernel, Matthias Brugger, Yingjoe Chen,
Eddie Huang, linux-arm-kernel, James Liao
On 03/19, Sascha Hauer wrote:
> diff --git a/drivers/clk/mediatek/clk-mt8135.c b/drivers/clk/mediatek/clk-mt8135.c
> new file mode 100644
> index 0000000..a22f6fa
> --- /dev/null
> +++ b/drivers/clk/mediatek/clk-mt8135.c
> @@ -0,0 +1,640 @@
> +/*
> + * Copyright (c) 2014 MediaTek Inc.
> + * Author: James Liao <jamesjj.liao@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/slab.h>
> +#include <linux/mfd/syscon.h>
> +#include <dt-bindings/clock/mt8135-clk.h>
> +
> +#include "clk-mtk.h"
> +#include "clk-gate.h"
> +
> +static DEFINE_SPINLOCK(lock);
Nitpick: 'lock' is very generic. Lockdep will use the variable
name in its output, so it's wise to make locks have better names
if possible. How about mt8135_lock?
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 53+ messages in thread
* [PATCH 4/6] clk: mediatek: Add basic clocks for Mediatek MT8135.
@ 2015-03-27 7:39 ` Stephen Boyd
0 siblings, 0 replies; 53+ messages in thread
From: Stephen Boyd @ 2015-03-27 7:39 UTC (permalink / raw)
To: linux-arm-kernel
On 03/19, Sascha Hauer wrote:
> diff --git a/drivers/clk/mediatek/clk-mt8135.c b/drivers/clk/mediatek/clk-mt8135.c
> new file mode 100644
> index 0000000..a22f6fa
> --- /dev/null
> +++ b/drivers/clk/mediatek/clk-mt8135.c
> @@ -0,0 +1,640 @@
> +/*
> + * Copyright (c) 2014 MediaTek Inc.
> + * Author: James Liao <jamesjj.liao@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/slab.h>
> +#include <linux/mfd/syscon.h>
> +#include <dt-bindings/clock/mt8135-clk.h>
> +
> +#include "clk-mtk.h"
> +#include "clk-gate.h"
> +
> +static DEFINE_SPINLOCK(lock);
Nitpick: 'lock' is very generic. Lockdep will use the variable
name in its output, so it's wise to make locks have better names
if possible. How about mt8135_lock?
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [PATCH 4/6] clk: mediatek: Add basic clocks for Mediatek MT8135.
2015-03-27 7:39 ` Stephen Boyd
@ 2015-03-27 9:21 ` Sascha Hauer
-1 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-27 9:21 UTC (permalink / raw)
To: Stephen Boyd
Cc: Mike Turquette, YH Chen, linux-kernel, Henry Chen,
linux-mediatek, kernel, Matthias Brugger, Yingjoe Chen,
Eddie Huang, linux-arm-kernel, James Liao
On Fri, Mar 27, 2015 at 12:39:50AM -0700, Stephen Boyd wrote:
> On 03/19, Sascha Hauer wrote:
> > diff --git a/drivers/clk/mediatek/clk-mt8135.c b/drivers/clk/mediatek/clk-mt8135.c
> > new file mode 100644
> > index 0000000..a22f6fa
> > --- /dev/null
> > +++ b/drivers/clk/mediatek/clk-mt8135.c
> > @@ -0,0 +1,640 @@
> > +/*
> > + * Copyright (c) 2014 MediaTek Inc.
> > + * Author: James Liao <jamesjj.liao@mediatek.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/slab.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <dt-bindings/clock/mt8135-clk.h>
> > +
> > +#include "clk-mtk.h"
> > +#include "clk-gate.h"
> > +
> > +static DEFINE_SPINLOCK(lock);
>
> Nitpick: 'lock' is very generic. Lockdep will use the variable
> name in its output, so it's wise to make locks have better names
> if possible. How about mt8135_lock?
I just renamed this to mt8135_clk_lock/mt8173_clk_lock and resent the
series.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 53+ messages in thread
* [PATCH 4/6] clk: mediatek: Add basic clocks for Mediatek MT8135.
@ 2015-03-27 9:21 ` Sascha Hauer
0 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-27 9:21 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Mar 27, 2015 at 12:39:50AM -0700, Stephen Boyd wrote:
> On 03/19, Sascha Hauer wrote:
> > diff --git a/drivers/clk/mediatek/clk-mt8135.c b/drivers/clk/mediatek/clk-mt8135.c
> > new file mode 100644
> > index 0000000..a22f6fa
> > --- /dev/null
> > +++ b/drivers/clk/mediatek/clk-mt8135.c
> > @@ -0,0 +1,640 @@
> > +/*
> > + * Copyright (c) 2014 MediaTek Inc.
> > + * Author: James Liao <jamesjj.liao@mediatek.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/slab.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <dt-bindings/clock/mt8135-clk.h>
> > +
> > +#include "clk-mtk.h"
> > +#include "clk-gate.h"
> > +
> > +static DEFINE_SPINLOCK(lock);
>
> Nitpick: 'lock' is very generic. Lockdep will use the variable
> name in its output, so it's wise to make locks have better names
> if possible. How about mt8135_lock?
I just renamed this to mt8135_clk_lock/mt8173_clk_lock and resent the
series.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 53+ messages in thread
* [PATCH 5/6] clk: mediatek: Add basic clocks for Mediatek MT8173.
@ 2015-03-19 8:42 ` Sascha Hauer
0 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: Mike Turquette
Cc: Stephen Boyd, YH Chen, linux-kernel, Henry Chen, linux-mediatek,
kernel, Matthias Brugger, Yingjoe Chen, Eddie Huang,
linux-arm-kernel, James Liao, Sascha Hauer
From: James Liao <jamesjj.liao@mediatek.com>
This patch adds basic clocks for MT8173, including TOPCKGEN, PLLs,
INFRA and PERI clocks.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mt8173.c | 826 +++++++++++++++++++++
include/dt-bindings/clock/mt8173-clk.h | 231 ++++++
.../dt-bindings/reset-controller/mt8173-resets.h | 63 ++
4 files changed, 1121 insertions(+)
create mode 100644 drivers/clk/mediatek/clk-mt8173.c
create mode 100644 include/dt-bindings/clock/mt8173-clk.h
create mode 100644 include/dt-bindings/reset-controller/mt8173-resets.h
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 12ce576..8e4b2a4 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -1,3 +1,4 @@
obj-y += clk-mtk.o clk-pll.o clk-gate.o
obj-$(CONFIG_RESET_CONTROLLER) += reset.o
obj-y += clk-mt8135.o
+obj-y += clk-mt8173.o
diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
new file mode 100644
index 0000000..23fe863
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -0,0 +1,826 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt8173-clk.h>
+
+static DEFINE_SPINLOCK(lock);
+
+static const struct mtk_fixed_factor root_clk_alias[] __initconst = {
+ FACTOR(TOP_CLKPH_MCK_O, "clkph_mck_o", "clk_null", 1, 1),
+ FACTOR(TOP_DPI_CK, "dpi_ck", "clk_null", 1, 1),
+ FACTOR(TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk_null", 1, 1),
+ FACTOR(TOP_HDMITX_DIG_CTS, "hdmitx_dig_cts", "clk_null", 1, 1),
+};
+
+static const struct mtk_fixed_factor top_divs[] __initconst = {
+ FACTOR(TOP_ARMCA7PLL_754M, "armca7pll_754m", "armca7pll", 1, 2),
+ FACTOR(TOP_ARMCA7PLL_502M, "armca7pll_502m", "armca7pll", 1, 3),
+
+ FACTOR(TOP_MAIN_H546M, "main_h546m", "mainpll", 1, 2),
+ FACTOR(TOP_MAIN_H364M, "main_h364m", "mainpll", 1, 3),
+ FACTOR(TOP_MAIN_H218P4M, "main_h218p4m", "mainpll", 1, 5),
+ FACTOR(TOP_MAIN_H156M, "main_h156m", "mainpll", 1, 7),
+
+ FACTOR(TOP_TVDPLL_445P5M, "tvdpll_445p5m", "tvdpll", 1, 4),
+ FACTOR(TOP_TVDPLL_594M, "tvdpll_594m", "tvdpll", 1, 3),
+
+ FACTOR(TOP_UNIV_624M, "univ_624m", "univpll", 1, 2),
+ FACTOR(TOP_UNIV_416M, "univ_416m", "univpll", 1, 3),
+ FACTOR(TOP_UNIV_249P6M, "univ_249p6m", "univpll", 1, 5),
+ FACTOR(TOP_UNIV_178P3M, "univ_178p3m", "univpll", 1, 7),
+ FACTOR(TOP_UNIV_48M, "univ_48m", "univpll", 1, 26),
+
+ FACTOR(TOP_CLKRTC_EXT, "clkrtc_ext", "clk32k", 1, 1),
+ FACTOR(TOP_CLKRTC_INT, "clkrtc_int", "clk26m", 1, 793),
+ FACTOR(TOP_FPC_CK, "fpc_ck", "clk26m", 1, 1),
+
+ FACTOR(TOP_HDMITXPLL_D2, "hdmitxpll_d2", "hdmitx_dig_cts", 1, 2),
+ FACTOR(TOP_HDMITXPLL_D3, "hdmitxpll_d3", "hdmitx_dig_cts", 1, 3),
+
+ FACTOR(TOP_ARMCA7PLL_D2, "armca7pll_d2", "armca7pll_754m", 1, 1),
+ FACTOR(TOP_ARMCA7PLL_D3, "armca7pll_d3", "armca7pll_502m", 1, 1),
+
+ FACTOR(TOP_APLL1_CK, "apll1_ck", "apll1", 1, 1),
+ FACTOR(TOP_APLL2_CK, "apll2_ck", "apll2", 1, 1),
+
+ FACTOR(TOP_DMPLL_CK, "dmpll_ck", "clkph_mck_o", 1, 1),
+ FACTOR(TOP_DMPLL_D2, "dmpll_d2", "clkph_mck_o", 1, 2),
+ FACTOR(TOP_DMPLL_D4, "dmpll_d4", "clkph_mck_o", 1, 4),
+ FACTOR(TOP_DMPLL_D8, "dmpll_d8", "clkph_mck_o", 1, 8),
+ FACTOR(TOP_DMPLL_D16, "dmpll_d16", "clkph_mck_o", 1, 16),
+
+ FACTOR(TOP_LVDSPLL_D2, "lvdspll_d2", "lvdspll", 1, 2),
+ FACTOR(TOP_LVDSPLL_D4, "lvdspll_d4", "lvdspll", 1, 4),
+ FACTOR(TOP_LVDSPLL_D8, "lvdspll_d8", "lvdspll", 1, 8),
+
+ FACTOR(TOP_MMPLL_CK, "mmpll_ck", "mmpll", 1, 1),
+ FACTOR(TOP_MMPLL_D2, "mmpll_d2", "mmpll", 1, 2),
+
+ FACTOR(TOP_MSDCPLL_CK, "msdcpll_ck", "msdcpll", 1, 1),
+ FACTOR(TOP_MSDCPLL_D2, "msdcpll_d2", "msdcpll", 1, 2),
+ FACTOR(TOP_MSDCPLL_D4, "msdcpll_d4", "msdcpll", 1, 4),
+ FACTOR(TOP_MSDCPLL2_CK, "msdcpll2_ck", "msdcpll2", 1, 1),
+ FACTOR(TOP_MSDCPLL2_D2, "msdcpll2_d2", "msdcpll2", 1, 2),
+ FACTOR(TOP_MSDCPLL2_D4, "msdcpll2_d4", "msdcpll2", 1, 4),
+
+ FACTOR(TOP_SYSPLL_D2, "syspll_d2", "main_h546m", 1, 1),
+ FACTOR(TOP_SYSPLL1_D2, "syspll1_d2", "main_h546m", 1, 2),
+ FACTOR(TOP_SYSPLL1_D4, "syspll1_d4", "main_h546m", 1, 4),
+ FACTOR(TOP_SYSPLL1_D8, "syspll1_d8", "main_h546m", 1, 8),
+ FACTOR(TOP_SYSPLL1_D16, "syspll1_d16", "main_h546m", 1, 16),
+ FACTOR(TOP_SYSPLL_D3, "syspll_d3", "main_h364m", 1, 1),
+ FACTOR(TOP_SYSPLL2_D2, "syspll2_d2", "main_h364m", 1, 2),
+ FACTOR(TOP_SYSPLL2_D4, "syspll2_d4", "main_h364m", 1, 4),
+ FACTOR(TOP_SYSPLL_D5, "syspll_d5", "main_h218p4m", 1, 1),
+ FACTOR(TOP_SYSPLL3_D2, "syspll3_d2", "main_h218p4m", 1, 2),
+ FACTOR(TOP_SYSPLL3_D4, "syspll3_d4", "main_h218p4m", 1, 4),
+ FACTOR(TOP_SYSPLL_D7, "syspll_d7", "main_h156m", 1, 1),
+ FACTOR(TOP_SYSPLL4_D2, "syspll4_d2", "main_h156m", 1, 2),
+ FACTOR(TOP_SYSPLL4_D4, "syspll4_d4", "main_h156m", 1, 4),
+
+ FACTOR(TOP_TVDPLL_CK, "tvdpll_ck", "tvdpll_594m", 1, 1),
+ FACTOR(TOP_TVDPLL_D2, "tvdpll_d2", "tvdpll_594m", 1, 2),
+ FACTOR(TOP_TVDPLL_D4, "tvdpll_d4", "tvdpll_594m", 1, 4),
+ FACTOR(TOP_TVDPLL_D8, "tvdpll_d8", "tvdpll_594m", 1, 8),
+ FACTOR(TOP_TVDPLL_D16, "tvdpll_d16", "tvdpll_594m", 1, 16),
+
+ FACTOR(TOP_UNIVPLL_D2, "univpll_d2", "univ_624m", 1, 1),
+ FACTOR(TOP_UNIVPLL1_D2, "univpll1_d2", "univ_624m", 1, 2),
+ FACTOR(TOP_UNIVPLL1_D4, "univpll1_d4", "univ_624m", 1, 4),
+ FACTOR(TOP_UNIVPLL1_D8, "univpll1_d8", "univ_624m", 1, 8),
+ FACTOR(TOP_UNIVPLL_D3, "univpll_d3", "univ_416m", 1, 1),
+ FACTOR(TOP_UNIVPLL2_D2, "univpll2_d2", "univ_416m", 1, 2),
+ FACTOR(TOP_UNIVPLL2_D4, "univpll2_d4", "univ_416m", 1, 4),
+ FACTOR(TOP_UNIVPLL2_D8, "univpll2_d8", "univ_416m", 1, 8),
+ FACTOR(TOP_UNIVPLL_D5, "univpll_d5", "univ_249p6m", 1, 1),
+ FACTOR(TOP_UNIVPLL3_D2, "univpll3_d2", "univ_249p6m", 1, 2),
+ FACTOR(TOP_UNIVPLL3_D4, "univpll3_d4", "univ_249p6m", 1, 4),
+ FACTOR(TOP_UNIVPLL3_D8, "univpll3_d8", "univ_249p6m", 1, 8),
+ FACTOR(TOP_UNIVPLL_D7, "univpll_d7", "univ_178p3m", 1, 1),
+ FACTOR(TOP_UNIVPLL_D26, "univpll_d26", "univ_48m", 1, 1),
+ FACTOR(TOP_UNIVPLL_D52, "univpll_d52", "univ_48m", 1, 2),
+
+ FACTOR(TOP_VCODECPLL_CK, "vcodecpll_ck", "vcodecpll", 1, 3),
+ FACTOR(TOP_VCODECPLL_370P5, "vcodecpll_370p5", "vcodecpll", 1, 4),
+
+ FACTOR(TOP_VENCPLL_CK, "vencpll_ck", "vencpll", 1, 1),
+ FACTOR(TOP_VENCPLL_D2, "vencpll_d2", "vencpll", 1, 2),
+ FACTOR(TOP_VENCPLL_D4, "vencpll_d4", "vencpll", 1, 4),
+};
+
+static const char * const axi_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d2",
+ "syspll_d5",
+ "syspll1_d4",
+ "univpll_d5",
+ "univpll2_d2",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const mem_parents[] __initconst = {
+ "clk26m",
+ "dmpll_ck"
+};
+
+static const char * const ddrphycfg_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d8"
+};
+
+static const char * const mm_parents[] __initconst = {
+ "clk26m",
+ "vencpll_d2",
+ "main_h364m",
+ "syspll1_d2",
+ "syspll_d5",
+ "syspll1_d4",
+ "univpll1_d2",
+ "univpll2_d2",
+ "dmpll_d2"
+};
+
+static const char * const pwm_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d4",
+ "univpll3_d2",
+ "univpll1_d4"
+};
+
+static const char * const vdec_parents[] __initconst = {
+ "clk26m",
+ "vcodecpll_ck",
+ "tvdpll_445p5m",
+ "univpll_d3",
+ "vencpll_d2",
+ "syspll_d3",
+ "univpll1_d2",
+ "mmpll_d2",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const venc_parents[] __initconst = {
+ "clk26m",
+ "vcodecpll_ck",
+ "tvdpll_445p5m",
+ "univpll_d3",
+ "vencpll_d2",
+ "syspll_d3",
+ "univpll1_d2",
+ "univpll2_d2",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const mfg_parents[] __initconst = {
+ "clk26m",
+ "mmpll_ck",
+ "dmpll_ck",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "syspll_d3",
+ "syspll1_d2",
+ "syspll_d5",
+ "univpll_d3",
+ "univpll1_d2",
+ "univpll_d5",
+ "univpll2_d2"
+};
+
+static const char * const camtg_parents[] __initconst = {
+ "clk26m",
+ "univpll_d26",
+ "univpll2_d2",
+ "syspll3_d2",
+ "syspll3_d4",
+ "univpll1_d4"
+};
+
+static const char * const uart_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d8"
+};
+
+static const char * const spi_parents[] __initconst = {
+ "clk26m",
+ "syspll3_d2",
+ "syspll1_d4",
+ "syspll4_d2",
+ "univpll3_d2",
+ "univpll2_d4",
+ "univpll1_d8"
+};
+
+static const char * const usb20_parents[] __initconst = {
+ "clk26m",
+ "univpll1_d8",
+ "univpll3_d4"
+};
+
+static const char * const usb30_parents[] __initconst = {
+ "clk26m",
+ "univpll3_d2",
+ "usb_syspll_125m",
+ "univpll2_d4"
+};
+
+static const char * const msdc50_0_h_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d2",
+ "syspll2_d2",
+ "syspll4_d2",
+ "univpll_d5",
+ "univpll1_d4"
+};
+
+static const char * const msdc50_0_parents[] __initconst = {
+ "clk26m",
+ "msdcpll_ck",
+ "msdcpll_d2",
+ "univpll1_d4",
+ "syspll2_d2",
+ "syspll_d7",
+ "msdcpll_d4",
+ "vencpll_d4",
+ "tvdpll_ck",
+ "univpll_d2",
+ "univpll1_d2",
+ "mmpll_ck",
+ "msdcpll2_ck",
+ "msdcpll2_d2",
+ "msdcpll2_d4"
+};
+
+static const char * const msdc30_1_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d2",
+ "msdcpll_d4",
+ "univpll1_d4",
+ "syspll2_d2",
+ "syspll_d7",
+ "univpll_d7",
+ "vencpll_d4"
+};
+
+static const char * const msdc30_2_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d2",
+ "msdcpll_d4",
+ "univpll1_d4",
+ "syspll2_d2",
+ "syspll_d7",
+ "univpll_d7",
+ "vencpll_d2"
+};
+
+static const char * const msdc30_3_parents[] __initconst = {
+ "clk26m",
+ "msdcpll2_ck",
+ "msdcpll2_d2",
+ "univpll2_d2",
+ "msdcpll2_d4",
+ "msdcpll_d4",
+ "univpll1_d4",
+ "syspll2_d2",
+ "syspll_d7",
+ "univpll_d7",
+ "vencpll_d4",
+ "msdcpll_ck",
+ "msdcpll_d2",
+ "msdcpll_d4"
+};
+
+static const char * const audio_parents[] __initconst = {
+ "clk26m",
+ "syspll3_d4",
+ "syspll4_d4",
+ "syspll1_d16"
+};
+
+static const char * const aud_intbus_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d4",
+ "syspll4_d2",
+ "univpll3_d2",
+ "univpll2_d8",
+ "dmpll_d4",
+ "dmpll_d8"
+};
+
+static const char * const pmicspi_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d8",
+ "syspll3_d4",
+ "syspll1_d16",
+ "univpll3_d4",
+ "univpll_d26",
+ "dmpll_d8",
+ "dmpll_d16"
+};
+
+static const char * const scp_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d2",
+ "univpll_d5",
+ "syspll_d5",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const atb_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d2",
+ "univpll_d5",
+ "dmpll_d2"
+};
+
+static const char * const venc_lt_parents[] __initconst = {
+ "clk26m",
+ "univpll_d3",
+ "vcodecpll_ck",
+ "tvdpll_445p5m",
+ "vencpll_d2",
+ "syspll_d3",
+ "univpll1_d2",
+ "univpll2_d2",
+ "syspll1_d2",
+ "univpll_d5",
+ "vcodecpll_370p5",
+ "dmpll_ck"
+};
+
+static const char * const dpi0_parents[] __initconst = {
+ "clk26m",
+ "tvdpll_d2",
+ "tvdpll_d4",
+ "clk26m",
+ "clk26m",
+ "tvdpll_d8",
+ "tvdpll_d16"
+};
+
+static const char * const irda_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d4",
+ "syspll2_d4"
+};
+
+static const char * const cci400_parents[] __initconst = {
+ "clk26m",
+ "vencpll_ck",
+ "armca7pll_754m",
+ "armca7pll_502m",
+ "univpll_d2",
+ "syspll_d2",
+ "msdcpll_ck",
+ "dmpll_ck"
+};
+
+static const char * const aud_1_parents[] __initconst = {
+ "clk26m",
+ "apll1_ck",
+ "univpll2_d4",
+ "univpll2_d8"
+};
+
+static const char * const aud_2_parents[] __initconst = {
+ "clk26m",
+ "apll2_ck",
+ "univpll2_d4",
+ "univpll2_d8"
+};
+
+static const char * const mem_mfg_in_parents[] __initconst = {
+ "clk26m",
+ "mmpll_ck",
+ "dmpll_ck",
+ "clk26m"
+};
+
+static const char * const axi_mfg_in_parents[] __initconst = {
+ "clk26m",
+ "axi_sel",
+ "dmpll_d2"
+};
+
+static const char * const scam_parents[] __initconst = {
+ "clk26m",
+ "syspll3_d2",
+ "univpll2_d4",
+ "dmpll_d4"
+};
+
+static const char * const spinfi_ifr_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d8",
+ "univpll3_d4",
+ "syspll4_d2",
+ "univpll2_d4",
+ "univpll3_d2",
+ "syspll1_d4",
+ "univpll1_d4"
+};
+
+static const char * const hdmi_parents[] __initconst = {
+ "clk26m",
+ "hdmitx_dig_cts",
+ "hdmitxpll_d2",
+ "hdmitxpll_d3"
+};
+
+static const char * const dpilvds_parents[] __initconst = {
+ "clk26m",
+ "lvdspll",
+ "lvdspll_d2",
+ "lvdspll_d4",
+ "lvdspll_d8",
+ "fpc_ck"
+};
+
+static const char * const msdc50_2_h_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d2",
+ "syspll2_d2",
+ "syspll4_d2",
+ "univpll_d5",
+ "univpll1_d4"
+};
+
+static const char * const hdcp_parents[] __initconst = {
+ "clk26m",
+ "syspll4_d2",
+ "syspll3_d4",
+ "univpll2_d4"
+};
+
+static const char * const hdcp_24m_parents[] __initconst = {
+ "clk26m",
+ "univpll_d26",
+ "univpll_d52",
+ "univpll2_d8"
+};
+
+static const char * const rtc_parents[] __initconst = {
+ "clkrtc_int",
+ "clkrtc_ext",
+ "clk26m",
+ "univpll3_d8"
+};
+
+static const char * const i2s0_m_ck_parents[] __initconst = {
+ "apll1_div1",
+ "apll2_div1"
+};
+
+static const char * const i2s1_m_ck_parents[] __initconst = {
+ "apll1_div2",
+ "apll2_div2"
+};
+
+static const char * const i2s2_m_ck_parents[] __initconst = {
+ "apll1_div3",
+ "apll2_div3"
+};
+
+static const char * const i2s3_m_ck_parents[] __initconst = {
+ "apll1_div4",
+ "apll2_div4"
+};
+
+static const char * const i2s3_b_ck_parents[] __initconst = {
+ "apll1_div5",
+ "apll2_div5"
+};
+
+static const struct mtk_composite top_muxes[] __initconst = {
+ /* CLK_CFG_0 */
+ MUX(TOP_AXI_SEL, "axi_sel", axi_parents, 0x0040, 0, 3),
+ MUX(TOP_MEM_SEL, "mem_sel", mem_parents, 0x0040, 8, 1),
+ MUX_GATE(TOP_DDRPHYCFG_SEL, "ddrphycfg_sel", ddrphycfg_parents, 0x0040, 16, 1, 23),
+ MUX_GATE(TOP_MM_SEL, "mm_sel", mm_parents, 0x0040, 24, 4, 31),
+ /* CLK_CFG_1 */
+ MUX_GATE(TOP_PWM_SEL, "pwm_sel", pwm_parents, 0x0050, 0, 2, 7),
+ MUX_GATE(TOP_VDEC_SEL, "vdec_sel", vdec_parents, 0x0050, 8, 4, 15),
+ MUX_GATE(TOP_VENC_SEL, "venc_sel", venc_parents, 0x0050, 16, 4, 23),
+ MUX_GATE(TOP_MFG_SEL, "mfg_sel", mfg_parents, 0x0050, 24, 4, 31),
+ /* CLK_CFG_2 */
+ MUX_GATE(TOP_CAMTG_SEL, "camtg_sel", camtg_parents, 0x0060, 0, 3, 7),
+ MUX_GATE(TOP_UART_SEL, "uart_sel", uart_parents, 0x0060, 8, 1, 15),
+ MUX_GATE(TOP_SPI_SEL, "spi_sel", spi_parents, 0x0060, 16, 3, 23),
+ MUX_GATE(TOP_USB20_SEL, "usb20_sel", usb20_parents, 0x0060, 24, 2, 31),
+ /* CLK_CFG_3 */
+ MUX_GATE(TOP_USB30_SEL, "usb30_sel", usb30_parents, 0x0070, 0, 2, 7),
+ MUX_GATE(TOP_MSDC50_0_H_SEL, "msdc50_0_h_sel", msdc50_0_h_parents, 0x0070, 8, 3, 15),
+ MUX_GATE(TOP_MSDC50_0_SEL, "msdc50_0_sel", msdc50_0_parents, 0x0070, 16, 4, 23),
+ MUX_GATE(TOP_MSDC30_1_SEL, "msdc30_1_sel", msdc30_1_parents, 0x0070, 24, 3, 31),
+ /* CLK_CFG_4 */
+ MUX_GATE(TOP_MSDC30_2_SEL, "msdc30_2_sel", msdc30_2_parents, 0x0080, 0, 3, 7),
+ MUX_GATE(TOP_MSDC30_3_SEL, "msdc30_3_sel", msdc30_3_parents, 0x0080, 8, 4, 15),
+ MUX_GATE(TOP_AUDIO_SEL, "audio_sel", audio_parents, 0x0080, 16, 2, 23),
+ MUX_GATE(TOP_AUD_INTBUS_SEL, "aud_intbus_sel", aud_intbus_parents, 0x0080, 24, 3, 31),
+ /* CLK_CFG_5 */
+ MUX_GATE(TOP_PMICSPI_SEL, "pmicspi_sel", pmicspi_parents, 0x0090, 0, 3, 7 /* 7:5 */),
+ MUX_GATE(TOP_SCP_SEL, "scp_sel", scp_parents, 0x0090, 8, 3, 15),
+ MUX_GATE(TOP_ATB_SEL, "atb_sel", atb_parents, 0x0090, 16, 2, 23),
+ MUX_GATE(TOP_VENC_LT_SEL, "venclt_sel", venc_lt_parents, 0x0090, 24, 4, 31),
+ /* CLK_CFG_6 */
+ MUX_GATE(TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7),
+ MUX_GATE(TOP_IRDA_SEL, "irda_sel", irda_parents, 0x00a0, 8, 2, 15),
+ MUX_GATE(TOP_CCI400_SEL, "cci400_sel", cci400_parents, 0x00a0, 16, 3, 23),
+ MUX_GATE(TOP_AUD_1_SEL, "aud_1_sel", aud_1_parents, 0x00a0, 24, 2, 31),
+ /* CLK_CFG_7 */
+ MUX_GATE(TOP_AUD_2_SEL, "aud_2_sel", aud_2_parents, 0x00b0, 0, 2, 7),
+ MUX_GATE(TOP_MEM_MFG_IN_SEL, "mem_mfg_in_sel", mem_mfg_in_parents, 0x00b0, 8, 2, 15),
+ MUX_GATE(TOP_AXI_MFG_IN_SEL, "axi_mfg_in_sel", axi_mfg_in_parents, 0x00b0, 16, 2, 23),
+ MUX_GATE(TOP_SCAM_SEL, "scam_sel", scam_parents, 0x00b0, 24, 2, 31),
+ /* CLK_CFG_12 */
+ MUX_GATE(TOP_SPINFI_IFR_SEL, "spinfi_ifr_sel", spinfi_ifr_parents, 0x00c0, 0, 3, 7),
+ MUX_GATE(TOP_HDMI_SEL, "hdmi_sel", hdmi_parents, 0x00c0, 8, 2, 15),
+ MUX_GATE(TOP_DPILVDS_SEL, "dpilvds_sel", dpilvds_parents, 0x00c0, 24, 3, 31),
+ /* CLK_CFG_13 */
+ MUX_GATE(TOP_MSDC50_2_H_SEL, "msdc50_2_h_sel", msdc50_2_h_parents, 0x00d0, 0, 3, 7),
+ MUX_GATE(TOP_HDCP_SEL, "hdcp_sel", hdcp_parents, 0x00d0, 8, 2, 15),
+ MUX_GATE(TOP_HDCP_24M_SEL, "hdcp_24m_sel", hdcp_24m_parents, 0x00d0, 16, 2, 23),
+ MUX(TOP_RTC_SEL, "rtc_sel", rtc_parents, 0x00d0, 24, 2),
+
+ DIV_GATE(TOP_APLL1_DIV0, "apll1_div0", "aud_1_sel", 0x12c, 8, 0x120, 4, 24),
+ DIV_GATE(TOP_APLL1_DIV1, "apll1_div1", "aud_1_sel", 0x12c, 9, 0x124, 8, 0),
+ DIV_GATE(TOP_APLL1_DIV2, "apll1_div2", "aud_1_sel", 0x12c, 10, 0x124, 8, 8),
+ DIV_GATE(TOP_APLL1_DIV3, "apll1_div3", "aud_1_sel", 0x12c, 11, 0x124, 8, 16),
+ DIV_GATE(TOP_APLL1_DIV4, "apll1_div4", "aud_1_sel", 0x12c, 12, 0x124, 8, 24),
+ DIV_GATE(TOP_APLL1_DIV5, "apll1_div5", "aud_1_sel", 0x12c, 13, 0x12c, 4, 0),
+
+ DIV_GATE(TOP_APLL2_DIV0, "apll2_div0", "aud_2_sel", 0x12c, 16, 0x120, 4, 28),
+ DIV_GATE(TOP_APLL2_DIV1, "apll2_div1", "aud_2_sel", 0x12c, 17, 0x128, 8, 0),
+ DIV_GATE(TOP_APLL2_DIV2, "apll2_div2", "aud_2_sel", 0x12c, 18, 0x128, 8, 8),
+ DIV_GATE(TOP_APLL2_DIV3, "apll2_div3", "aud_2_sel", 0x12c, 19, 0x128, 8, 16),
+ DIV_GATE(TOP_APLL2_DIV4, "apll2_div4", "aud_2_sel", 0x12c, 20, 0x128, 8, 24),
+ DIV_GATE(TOP_APLL2_DIV5, "apll2_div5", "aud_2_sel", 0x12c, 21, 0x12c, 4, 4),
+
+ MUX(TOP_I2S0_M_CK_SEL, "i2s0_m_ck_sel", i2s0_m_ck_parents, 0x120, 4, 1),
+ MUX(TOP_I2S1_M_CK_SEL, "i2s1_m_ck_sel", i2s1_m_ck_parents, 0x120, 5, 1),
+ MUX(TOP_I2S2_M_CK_SEL, "i2s2_m_ck_sel", i2s2_m_ck_parents, 0x120, 6, 1),
+ MUX(TOP_I2S3_M_CK_SEL, "i2s3_m_ck_sel", i2s3_m_ck_parents, 0x120, 7, 1),
+ MUX(TOP_I2S3_B_CK_SEL, "i2s3_b_ck_sel", i2s3_b_ck_parents, 0x120, 8, 1),
+};
+
+static void __init mtk_init_clk_topckgen(void __iomem *top_base,
+ struct clk_onecell_data *clk_data)
+{
+ int i;
+ struct clk *clk;
+
+ for (i = 0; i < ARRAY_SIZE(top_muxes); i++) {
+ const struct mtk_composite *mux = &top_muxes[i];
+
+ clk = mtk_clk_register_composite(mux, top_base, &lock);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ mux->name, PTR_ERR(clk));
+ continue;
+ }
+
+ if (clk_data)
+ clk_data->clks[mux->id] = clk;
+ }
+}
+
+static const struct mtk_gate_regs infra_cg_regs = {
+ .set_ofs = 0x0040,
+ .clr_ofs = 0x0044,
+ .sta_ofs = 0x0048,
+};
+
+#define GATE_ICG(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &infra_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate infra_clks[] __initconst = {
+ GATE_ICG(INFRA_DBGCLK, "infra_dbgclk", "axi_sel", 0),
+ GATE_ICG(INFRA_SMI, "infra_smi", "mm_sel", 1),
+ GATE_ICG(INFRA_AUDIO, "infra_audio", "aud_intbus_sel", 5),
+ GATE_ICG(INFRA_GCE, "infra_gce", "axi_sel", 6),
+ GATE_ICG(INFRA_L2C_SRAM, "infra_l2c_sram", "axi_sel", 7),
+ GATE_ICG(INFRA_M4U, "infra_m4u", "mem_sel", 8),
+ GATE_ICG(INFRA_CPUM, "infra_cpum", "clk_null", 15),
+ GATE_ICG(INFRA_KP, "infra_kp", "axi_sel", 16),
+ GATE_ICG(INFRA_CEC, "infra_cec", "clk26m", 18),
+ GATE_ICG(INFRA_PMICSPI, "infra_pmicspi", "pmicspi_sel", 22),
+ GATE_ICG(INFRA_PMICWRAP, "infra_pmicwrap", "axi_sel", 23),
+};
+
+static const struct mtk_gate_regs peri0_cg_regs = {
+ .set_ofs = 0x0008,
+ .clr_ofs = 0x0010,
+ .sta_ofs = 0x0018,
+};
+
+static const struct mtk_gate_regs peri1_cg_regs = {
+ .set_ofs = 0x000c,
+ .clr_ofs = 0x0014,
+ .sta_ofs = 0x001c,
+};
+
+#define GATE_PERI0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &peri0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+#define GATE_PERI1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &peri1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate peri_clks[] __initconst = {
+ /* PERI0 */
+ GATE_PERI0(PERI_NFI, "peri_nfi", "axi_sel", 0),
+ GATE_PERI0(PERI_THERM, "peri_therm", "axi_sel", 1),
+ GATE_PERI0(PERI_PWM1, "peri_pwm1", "axi_sel", 2),
+ GATE_PERI0(PERI_PWM2, "peri_pwm2", "axi_sel", 3),
+ GATE_PERI0(PERI_PWM3, "peri_pwm3", "axi_sel", 4),
+ GATE_PERI0(PERI_PWM4, "peri_pwm4", "axi_sel", 5),
+ GATE_PERI0(PERI_PWM5, "peri_pwm5", "axi_sel", 6),
+ GATE_PERI0(PERI_PWM6, "peri_pwm6", "axi_sel", 7),
+ GATE_PERI0(PERI_PWM7, "peri_pwm7", "axi_sel", 8),
+ GATE_PERI0(PERI_PWM, "peri_pwm", "axi_sel", 9),
+ GATE_PERI0(PERI_USB0, "peri_usb0", "usb20_sel", 10),
+ GATE_PERI0(PERI_USB1, "peri_usb1", "usb20_sel", 11),
+ GATE_PERI0(PERI_AP_DMA, "peri_ap_dma", "axi_sel", 12),
+ GATE_PERI0(PERI_MSDC30_0, "peri_msdc30_0", "msdc50_0_sel", 13),
+ GATE_PERI0(PERI_MSDC30_1, "peri_msdc30_1", "msdc30_1_sel", 14),
+ GATE_PERI0(PERI_MSDC30_2, "peri_msdc30_2", "msdc30_2_sel", 15),
+ GATE_PERI0(PERI_MSDC30_3, "peri_msdc30_3", "msdc30_3_sel", 16),
+ GATE_PERI0(PERI_NLI_ARB, "peri_nli_arb", "axi_sel", 17),
+ GATE_PERI0(PERI_IRDA, "peri_irda", "irda_sel", 18),
+ GATE_PERI0(PERI_UART0, "peri_uart0", "uart_sel", 19),
+ GATE_PERI0(PERI_UART1, "peri_uart1", "uart_sel", 20),
+ GATE_PERI0(PERI_UART2, "peri_uart2", "uart_sel", 21),
+ GATE_PERI0(PERI_UART3, "peri_uart3", "uart_sel", 22),
+ GATE_PERI0(PERI_I2C0, "peri_i2c0", "axi_sel", 23),
+ GATE_PERI0(PERI_I2C1, "peri_i2c1", "axi_sel", 24),
+ GATE_PERI0(PERI_I2C2, "peri_i2c2", "axi_sel", 25),
+ GATE_PERI0(PERI_I2C3, "peri_i2c3", "axi_sel", 26),
+ GATE_PERI0(PERI_I2C4, "peri_i2c4", "axi_sel", 27),
+ GATE_PERI0(PERI_AUXADC, "peri_auxadc", "clk26m", 28),
+ GATE_PERI0(PERI_SPI0, "peri_spi0", "spi_sel", 29),
+ GATE_PERI0(PERI_I2C5, "peri_i2c5", "axi_sel", 30),
+ GATE_PERI0(PERI_NFIECC, "peri_nfiecc", "axi_sel", 31),
+ /* PERI1 */
+ GATE_PERI1(PERI_SPI, "peri_spi", "spi_sel", 0),
+ GATE_PERI1(PERI_IRRX, "peri_irrx", "spi_sel", 1),
+ GATE_PERI1(PERI_I2C6, "peri_i2c6", "axi_sel", 2),
+};
+
+static void __init mtk_topckgen_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ void __iomem *base;
+ int r;
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("%s(): ioremap failed\n", __func__);
+ return;
+ }
+
+ clk_data = mtk_alloc_clk_data(TOP_NR_CLK);
+
+ mtk_clk_register_factors(root_clk_alias, ARRAY_SIZE(root_clk_alias), clk_data);
+ mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
+ mtk_init_clk_topckgen(base, clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+}
+CLK_OF_DECLARE(mtk_topckgen, "mediatek,mt8173-topckgen", mtk_topckgen_init);
+
+static void __init mtk_infrasys_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(INFRA_NR_CLK);
+
+ mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ mtk_register_reset_controller(node, 2, 0x30);
+}
+CLK_OF_DECLARE(mtk_infrasys, "mediatek,mt8173-infracfg", mtk_infrasys_init);
+
+static void __init mtk_pericfg_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(PERI_NR_CLK);
+
+ mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ mtk_register_reset_controller(node, 2, 0);
+}
+CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt8173-pericfg", mtk_pericfg_init);
+
+#define MT8173_PLL_FMAX (3000UL * MHZ)
+
+#define CON0_MT8173_RST_BAR BIT(24)
+
+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, _pd_shift, \
+ _tuner_reg, _pcw_reg, _pcw_shift) { \
+ .id = _id, \
+ .name = _name, \
+ .reg = _reg, \
+ .pwr_reg = _pwr_reg, \
+ .en_mask = _en_mask, \
+ .flags = _flags, \
+ .rst_bar_mask = CON0_MT8173_RST_BAR, \
+ .fmax = MT8173_PLL_FMAX, \
+ .pcwbits = _pcwbits, \
+ .pd_reg = _pd_reg, \
+ .pd_shift = _pd_shift, \
+ .tuner_reg = _tuner_reg, \
+ .pcw_reg = _pcw_reg, \
+ .pcw_shift = _pcw_shift, \
+ }
+
+static const struct mtk_pll_data plls[] = {
+ PLL(APMIXED_ARMCA15PLL, "armca15pll", 0x200, 0x20c, 0x00000001, 0, 21, 0x204, 24, 0x0, 0x204, 0),
+ PLL(APMIXED_ARMCA7PLL, "armca7pll", 0x210, 0x21c, 0x00000001, 0, 21, 0x214, 24, 0x0, 0x214, 0),
+ PLL(APMIXED_MAINPLL, "mainpll", 0x220, 0x22c, 0xf0000101, HAVE_RST_BAR, 21, 0x220, 4, 0x0, 0x224, 0),
+ PLL(APMIXED_UNIVPLL, "univpll", 0x230, 0x23c, 0xfe000001, HAVE_RST_BAR, 7, 0x230, 4, 0x0, 0x234, 14),
+ PLL(APMIXED_MMPLL, "mmpll", 0x240, 0x24c, 0x00000001, 0, 21, 0x244, 24, 0x0, 0x244, 0),
+ PLL(APMIXED_MSDCPLL, "msdcpll", 0x250, 0x25c, 0x00000001, 0, 21, 0x250, 4, 0x0, 0x254, 0),
+ PLL(APMIXED_VENCPLL, "vencpll", 0x260, 0x26c, 0x00000001, 0, 21, 0x260, 4, 0x0, 0x264, 0),
+ PLL(APMIXED_TVDPLL, "tvdpll", 0x270, 0x27c, 0x00000001, 0, 21, 0x270, 4, 0x0, 0x274, 0),
+ PLL(APMIXED_MPLL, "mpll", 0x280, 0x28c, 0x00000001, 0, 21, 0x280, 4, 0x0, 0x284, 0),
+ PLL(APMIXED_VCODECPLL, "vcodecpll", 0x290, 0x29c, 0x00000001, 0, 21, 0x290, 4, 0x0, 0x294, 0),
+ PLL(APMIXED_APLL1, "apll1", 0x2a0, 0x2b0, 0x00000001, 0, 31, 0x2a0, 4, 0x2a4, 0x2a4, 0),
+ PLL(APMIXED_APLL2, "apll2", 0x2b4, 0x2c4, 0x00000001, 0, 31, 0x2b4, 4, 0x2b8, 0x2b8, 0),
+ PLL(APMIXED_LVDSPLL, "lvdspll", 0x2d0, 0x2dc, 0x00000001, 0, 21, 0x2d0, 4, 0x0, 0x2d4, 0),
+ PLL(APMIXED_MSDCPLL2, "msdcpll2", 0x2f0, 0x2fc, 0x00000001, 0, 21, 0x2f0, 4, 0x0, 0x2f4, 0),
+};
+
+static void __init mtk_apmixedsys_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+
+ clk_data = mtk_alloc_clk_data(ARRAY_SIZE(plls));
+ if (!clk_data)
+ return;
+
+ mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
+}
+CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt8173-apmixedsys",
+ mtk_apmixedsys_init);
diff --git a/include/dt-bindings/clock/mt8173-clk.h b/include/dt-bindings/clock/mt8173-clk.h
new file mode 100644
index 0000000..e648b28
--- /dev/null
+++ b/include/dt-bindings/clock/mt8173-clk.h
@@ -0,0 +1,231 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_MT8173_H
+#define _DT_BINDINGS_CLK_MT8173_H
+
+/* TOPCKGEN */
+
+#define TOP_CLKPH_MCK_O 1
+#define TOP_DPI_CK 2
+#define TOP_USB_SYSPLL_125M 3
+#define TOP_HDMITX_DIG_CTS 4
+#define TOP_ARMCA7PLL_754M 5
+#define TOP_ARMCA7PLL_502M 6
+#define TOP_MAIN_H546M 7
+#define TOP_MAIN_H364M 8
+#define TOP_MAIN_H218P4M 9
+#define TOP_MAIN_H156M 10
+#define TOP_TVDPLL_445P5M 11
+#define TOP_TVDPLL_594M 12
+#define TOP_UNIV_624M 13
+#define TOP_UNIV_416M 14
+#define TOP_UNIV_249P6M 15
+#define TOP_UNIV_178P3M 16
+#define TOP_UNIV_48M 17
+#define TOP_CLKRTC_EXT 18
+#define TOP_CLKRTC_INT 19
+#define TOP_FPC_CK 20
+#define TOP_HDMITXPLL_D2 21
+#define TOP_HDMITXPLL_D3 22
+#define TOP_ARMCA7PLL_D2 23
+#define TOP_ARMCA7PLL_D3 24
+#define TOP_APLL1_CK 25
+#define TOP_APLL2_CK 26
+#define TOP_DMPLL_CK 27
+#define TOP_DMPLL_D2 28
+#define TOP_DMPLL_D4 29
+#define TOP_DMPLL_D8 30
+#define TOP_DMPLL_D16 31
+#define TOP_LVDSPLL_D2 32
+#define TOP_LVDSPLL_D4 33
+#define TOP_LVDSPLL_D8 34
+#define TOP_MMPLL_CK 35
+#define TOP_MMPLL_D2 36
+#define TOP_MSDCPLL_CK 37
+#define TOP_MSDCPLL_D2 38
+#define TOP_MSDCPLL_D4 39
+#define TOP_MSDCPLL2_CK 40
+#define TOP_MSDCPLL2_D2 41
+#define TOP_MSDCPLL2_D4 42
+#define TOP_SYSPLL_D2 43
+#define TOP_SYSPLL1_D2 44
+#define TOP_SYSPLL1_D4 45
+#define TOP_SYSPLL1_D8 46
+#define TOP_SYSPLL1_D16 47
+#define TOP_SYSPLL_D3 48
+#define TOP_SYSPLL2_D2 49
+#define TOP_SYSPLL2_D4 50
+#define TOP_SYSPLL_D5 51
+#define TOP_SYSPLL3_D2 52
+#define TOP_SYSPLL3_D4 53
+#define TOP_SYSPLL_D7 54
+#define TOP_SYSPLL4_D2 55
+#define TOP_SYSPLL4_D4 56
+#define TOP_TVDPLL_CK 57
+#define TOP_TVDPLL_D2 58
+#define TOP_TVDPLL_D4 59
+#define TOP_TVDPLL_D8 60
+#define TOP_TVDPLL_D16 61
+#define TOP_UNIVPLL_D2 62
+#define TOP_UNIVPLL1_D2 63
+#define TOP_UNIVPLL1_D4 64
+#define TOP_UNIVPLL1_D8 65
+#define TOP_UNIVPLL_D3 66
+#define TOP_UNIVPLL2_D2 67
+#define TOP_UNIVPLL2_D4 68
+#define TOP_UNIVPLL2_D8 69
+#define TOP_UNIVPLL_D5 70
+#define TOP_UNIVPLL3_D2 71
+#define TOP_UNIVPLL3_D4 72
+#define TOP_UNIVPLL3_D8 73
+#define TOP_UNIVPLL_D7 74
+#define TOP_UNIVPLL_D26 75
+#define TOP_UNIVPLL_D52 76
+#define TOP_VCODECPLL_CK 77
+#define TOP_VCODECPLL_370P5 78
+#define TOP_VENCPLL_CK 79
+#define TOP_VENCPLL_D2 80
+#define TOP_VENCPLL_D4 81
+#define TOP_AXI_SEL 82
+#define TOP_MEM_SEL 83
+#define TOP_DDRPHYCFG_SEL 84
+#define TOP_MM_SEL 85
+#define TOP_PWM_SEL 86
+#define TOP_VDEC_SEL 87
+#define TOP_VENC_SEL 88
+#define TOP_MFG_SEL 89
+#define TOP_CAMTG_SEL 90
+#define TOP_UART_SEL 91
+#define TOP_SPI_SEL 92
+#define TOP_USB20_SEL 93
+#define TOP_USB30_SEL 94
+#define TOP_MSDC50_0_H_SEL 95
+#define TOP_MSDC50_0_SEL 96
+#define TOP_MSDC30_1_SEL 97
+#define TOP_MSDC30_2_SEL 98
+#define TOP_MSDC30_3_SEL 99
+#define TOP_AUDIO_SEL 100
+#define TOP_AUD_INTBUS_SEL 101
+#define TOP_PMICSPI_SEL 102
+#define TOP_SCP_SEL 103
+#define TOP_ATB_SEL 104
+#define TOP_VENC_LT_SEL 105
+#define TOP_DPI0_SEL 106
+#define TOP_IRDA_SEL 107
+#define TOP_CCI400_SEL 108
+#define TOP_AUD_1_SEL 109
+#define TOP_AUD_2_SEL 110
+#define TOP_MEM_MFG_IN_SEL 111
+#define TOP_AXI_MFG_IN_SEL 112
+#define TOP_SCAM_SEL 113
+#define TOP_SPINFI_IFR_SEL 114
+#define TOP_HDMI_SEL 115
+#define TOP_DPILVDS_SEL 116
+#define TOP_MSDC50_2_H_SEL 117
+#define TOP_HDCP_SEL 118
+#define TOP_HDCP_24M_SEL 119
+#define TOP_RTC_SEL 120
+#define TOP_APLL1_DIV0 121
+#define TOP_APLL1_DIV1 122
+#define TOP_APLL1_DIV2 123
+#define TOP_APLL1_DIV3 124
+#define TOP_APLL1_DIV4 125
+#define TOP_APLL1_DIV5 126
+#define TOP_APLL2_DIV0 127
+#define TOP_APLL2_DIV1 128
+#define TOP_APLL2_DIV2 129
+#define TOP_APLL2_DIV3 130
+#define TOP_APLL2_DIV4 131
+#define TOP_APLL2_DIV5 132
+#define TOP_I2S0_M_CK_SEL 133
+#define TOP_I2S1_M_CK_SEL 134
+#define TOP_I2S2_M_CK_SEL 135
+#define TOP_I2S3_M_CK_SEL 136
+#define TOP_I2S3_B_CK_SEL 137
+#define TOP_NR_CLK 138
+
+/* APMIXED_SYS */
+
+#define APMIXED_ARMCA15PLL 1
+#define APMIXED_ARMCA7PLL 2
+#define APMIXED_MAINPLL 3
+#define APMIXED_UNIVPLL 4
+#define APMIXED_MMPLL 5
+#define APMIXED_MSDCPLL 6
+#define APMIXED_VENCPLL 7
+#define APMIXED_TVDPLL 8
+#define APMIXED_MPLL 9
+#define APMIXED_VCODECPLL 10
+#define APMIXED_APLL1 11
+#define APMIXED_APLL2 12
+#define APMIXED_LVDSPLL 13
+#define APMIXED_MSDCPLL2 14
+#define APMIXED_NR_CLK 15
+
+/* INFRA_SYS */
+
+#define INFRA_DBGCLK 1
+#define INFRA_SMI 2
+#define INFRA_AUDIO 3
+#define INFRA_GCE 4
+#define INFRA_L2C_SRAM 5
+#define INFRA_M4U 6
+#define INFRA_CPUM 7
+#define INFRA_KP 8
+#define INFRA_CEC 9
+#define INFRA_PMICSPI 10
+#define INFRA_PMICWRAP 11
+#define INFRA_NR_CLK 12
+
+/* PERI_SYS */
+
+#define PERI_NFI 1
+#define PERI_THERM 2
+#define PERI_PWM1 3
+#define PERI_PWM2 4
+#define PERI_PWM3 5
+#define PERI_PWM4 6
+#define PERI_PWM5 7
+#define PERI_PWM6 8
+#define PERI_PWM7 9
+#define PERI_PWM 10
+#define PERI_USB0 11
+#define PERI_USB1 12
+#define PERI_AP_DMA 13
+#define PERI_MSDC30_0 14
+#define PERI_MSDC30_1 15
+#define PERI_MSDC30_2 16
+#define PERI_MSDC30_3 17
+#define PERI_NLI_ARB 18
+#define PERI_IRDA 19
+#define PERI_UART0 20
+#define PERI_UART1 21
+#define PERI_UART2 22
+#define PERI_UART3 23
+#define PERI_I2C0 24
+#define PERI_I2C1 25
+#define PERI_I2C2 26
+#define PERI_I2C3 27
+#define PERI_I2C4 28
+#define PERI_AUXADC 29
+#define PERI_SPI0 30
+#define PERI_I2C5 31
+#define PERI_NFIECC 32
+#define PERI_SPI 33
+#define PERI_IRRX 34
+#define PERI_I2C6 35
+#define PERI_NR_CLK 36
+
+#endif /* _DT_BINDINGS_CLK_MT8173_H */
diff --git a/include/dt-bindings/reset-controller/mt8173-resets.h b/include/dt-bindings/reset-controller/mt8173-resets.h
new file mode 100644
index 0000000..9464b37
--- /dev/null
+++ b/include/dt-bindings/reset-controller/mt8173-resets.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora Fu, MediaTek
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8173
+#define _DT_BINDINGS_RESET_CONTROLLER_MT8173
+
+/* INFRACFG resets */
+#define MT8173_INFRA_EMI_REG_RST 0
+#define MT8173_INFRA_DRAMC0_A0_RST 1
+#define MT8173_INFRA_APCIRQ_EINT_RST 3
+#define MT8173_INFRA_APXGPT_RST 4
+#define MT8173_INFRA_SCPSYS_RST 5
+#define MT8173_INFRA_KP_RST 6
+#define MT8173_INFRA_PMIC_WRAP_RST 7
+#define MT8173_INFRA_MPIP_RST 8
+#define MT8173_INFRA_CEC_RST 9
+#define MT8173_INFRA_EMI_RST 32
+#define MT8173_INFRA_DRAMC0_RST 34
+#define MT8173_INFRA_APMIXEDSYS_RST 35
+#define MT8173_INFRA_MIPI_DSI_RST 36
+#define MT8173_INFRA_TRNG_RST 37
+#define MT8173_INFRA_SYSIRQ_RST 38
+#define MT8173_INFRA_MIPI_CSI_RST 39
+#define MT8173_INFRA_GCE_FAXI_RST 40
+#define MT8173_INFRA_MMIOMMURST 47
+
+
+/* PERICFG resets */
+#define MT8173_PERI_UART0_SW_RST 0
+#define MT8173_PERI_UART1_SW_RST 1
+#define MT8173_PERI_UART2_SW_RST 2
+#define MT8173_PERI_UART3_SW_RST 3
+#define MT8173_PERI_IRRX_SW_RST 4
+#define MT8173_PERI_PWM_SW_RST 8
+#define MT8173_PERI_AUXADC_SW_RST 10
+#define MT8173_PERI_DMA_SW_RST 11
+#define MT8173_PERI_I2C6_SW_RST 13
+#define MT8173_PERI_NFI_SW_RST 14
+#define MT8173_PERI_THERM_SW_RST 16
+#define MT8173_PERI_MSDC2_SW_RST 17
+#define MT8173_PERI_MSDC3_SW_RST 18
+#define MT8173_PERI_MSDC0_SW_RST 19
+#define MT8173_PERI_MSDC1_SW_RST 20
+#define MT8173_PERI_I2C0_SW_RST 22
+#define MT8173_PERI_I2C1_SW_RST 23
+#define MT8173_PERI_I2C2_SW_RST 24
+#define MT8173_PERI_I2C3_SW_RST 25
+#define MT8173_PERI_I2C4_SW_RST 26
+#define MT8173_PERI_HDMI_SW_RST 29
+#define MT8173_PERI_SPI0_SW_RST 33
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8173 */
--
2.1.4
^ permalink raw reply related [flat|nested] 53+ messages in thread* [PATCH 5/6] clk: mediatek: Add basic clocks for Mediatek MT8173.
@ 2015-03-19 8:42 ` Sascha Hauer
0 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: linux-arm-kernel
From: James Liao <jamesjj.liao@mediatek.com>
This patch adds basic clocks for MT8173, including TOPCKGEN, PLLs,
INFRA and PERI clocks.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mt8173.c | 826 +++++++++++++++++++++
include/dt-bindings/clock/mt8173-clk.h | 231 ++++++
.../dt-bindings/reset-controller/mt8173-resets.h | 63 ++
4 files changed, 1121 insertions(+)
create mode 100644 drivers/clk/mediatek/clk-mt8173.c
create mode 100644 include/dt-bindings/clock/mt8173-clk.h
create mode 100644 include/dt-bindings/reset-controller/mt8173-resets.h
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 12ce576..8e4b2a4 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -1,3 +1,4 @@
obj-y += clk-mtk.o clk-pll.o clk-gate.o
obj-$(CONFIG_RESET_CONTROLLER) += reset.o
obj-y += clk-mt8135.o
+obj-y += clk-mt8173.o
diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
new file mode 100644
index 0000000..23fe863
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -0,0 +1,826 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt8173-clk.h>
+
+static DEFINE_SPINLOCK(lock);
+
+static const struct mtk_fixed_factor root_clk_alias[] __initconst = {
+ FACTOR(TOP_CLKPH_MCK_O, "clkph_mck_o", "clk_null", 1, 1),
+ FACTOR(TOP_DPI_CK, "dpi_ck", "clk_null", 1, 1),
+ FACTOR(TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk_null", 1, 1),
+ FACTOR(TOP_HDMITX_DIG_CTS, "hdmitx_dig_cts", "clk_null", 1, 1),
+};
+
+static const struct mtk_fixed_factor top_divs[] __initconst = {
+ FACTOR(TOP_ARMCA7PLL_754M, "armca7pll_754m", "armca7pll", 1, 2),
+ FACTOR(TOP_ARMCA7PLL_502M, "armca7pll_502m", "armca7pll", 1, 3),
+
+ FACTOR(TOP_MAIN_H546M, "main_h546m", "mainpll", 1, 2),
+ FACTOR(TOP_MAIN_H364M, "main_h364m", "mainpll", 1, 3),
+ FACTOR(TOP_MAIN_H218P4M, "main_h218p4m", "mainpll", 1, 5),
+ FACTOR(TOP_MAIN_H156M, "main_h156m", "mainpll", 1, 7),
+
+ FACTOR(TOP_TVDPLL_445P5M, "tvdpll_445p5m", "tvdpll", 1, 4),
+ FACTOR(TOP_TVDPLL_594M, "tvdpll_594m", "tvdpll", 1, 3),
+
+ FACTOR(TOP_UNIV_624M, "univ_624m", "univpll", 1, 2),
+ FACTOR(TOP_UNIV_416M, "univ_416m", "univpll", 1, 3),
+ FACTOR(TOP_UNIV_249P6M, "univ_249p6m", "univpll", 1, 5),
+ FACTOR(TOP_UNIV_178P3M, "univ_178p3m", "univpll", 1, 7),
+ FACTOR(TOP_UNIV_48M, "univ_48m", "univpll", 1, 26),
+
+ FACTOR(TOP_CLKRTC_EXT, "clkrtc_ext", "clk32k", 1, 1),
+ FACTOR(TOP_CLKRTC_INT, "clkrtc_int", "clk26m", 1, 793),
+ FACTOR(TOP_FPC_CK, "fpc_ck", "clk26m", 1, 1),
+
+ FACTOR(TOP_HDMITXPLL_D2, "hdmitxpll_d2", "hdmitx_dig_cts", 1, 2),
+ FACTOR(TOP_HDMITXPLL_D3, "hdmitxpll_d3", "hdmitx_dig_cts", 1, 3),
+
+ FACTOR(TOP_ARMCA7PLL_D2, "armca7pll_d2", "armca7pll_754m", 1, 1),
+ FACTOR(TOP_ARMCA7PLL_D3, "armca7pll_d3", "armca7pll_502m", 1, 1),
+
+ FACTOR(TOP_APLL1_CK, "apll1_ck", "apll1", 1, 1),
+ FACTOR(TOP_APLL2_CK, "apll2_ck", "apll2", 1, 1),
+
+ FACTOR(TOP_DMPLL_CK, "dmpll_ck", "clkph_mck_o", 1, 1),
+ FACTOR(TOP_DMPLL_D2, "dmpll_d2", "clkph_mck_o", 1, 2),
+ FACTOR(TOP_DMPLL_D4, "dmpll_d4", "clkph_mck_o", 1, 4),
+ FACTOR(TOP_DMPLL_D8, "dmpll_d8", "clkph_mck_o", 1, 8),
+ FACTOR(TOP_DMPLL_D16, "dmpll_d16", "clkph_mck_o", 1, 16),
+
+ FACTOR(TOP_LVDSPLL_D2, "lvdspll_d2", "lvdspll", 1, 2),
+ FACTOR(TOP_LVDSPLL_D4, "lvdspll_d4", "lvdspll", 1, 4),
+ FACTOR(TOP_LVDSPLL_D8, "lvdspll_d8", "lvdspll", 1, 8),
+
+ FACTOR(TOP_MMPLL_CK, "mmpll_ck", "mmpll", 1, 1),
+ FACTOR(TOP_MMPLL_D2, "mmpll_d2", "mmpll", 1, 2),
+
+ FACTOR(TOP_MSDCPLL_CK, "msdcpll_ck", "msdcpll", 1, 1),
+ FACTOR(TOP_MSDCPLL_D2, "msdcpll_d2", "msdcpll", 1, 2),
+ FACTOR(TOP_MSDCPLL_D4, "msdcpll_d4", "msdcpll", 1, 4),
+ FACTOR(TOP_MSDCPLL2_CK, "msdcpll2_ck", "msdcpll2", 1, 1),
+ FACTOR(TOP_MSDCPLL2_D2, "msdcpll2_d2", "msdcpll2", 1, 2),
+ FACTOR(TOP_MSDCPLL2_D4, "msdcpll2_d4", "msdcpll2", 1, 4),
+
+ FACTOR(TOP_SYSPLL_D2, "syspll_d2", "main_h546m", 1, 1),
+ FACTOR(TOP_SYSPLL1_D2, "syspll1_d2", "main_h546m", 1, 2),
+ FACTOR(TOP_SYSPLL1_D4, "syspll1_d4", "main_h546m", 1, 4),
+ FACTOR(TOP_SYSPLL1_D8, "syspll1_d8", "main_h546m", 1, 8),
+ FACTOR(TOP_SYSPLL1_D16, "syspll1_d16", "main_h546m", 1, 16),
+ FACTOR(TOP_SYSPLL_D3, "syspll_d3", "main_h364m", 1, 1),
+ FACTOR(TOP_SYSPLL2_D2, "syspll2_d2", "main_h364m", 1, 2),
+ FACTOR(TOP_SYSPLL2_D4, "syspll2_d4", "main_h364m", 1, 4),
+ FACTOR(TOP_SYSPLL_D5, "syspll_d5", "main_h218p4m", 1, 1),
+ FACTOR(TOP_SYSPLL3_D2, "syspll3_d2", "main_h218p4m", 1, 2),
+ FACTOR(TOP_SYSPLL3_D4, "syspll3_d4", "main_h218p4m", 1, 4),
+ FACTOR(TOP_SYSPLL_D7, "syspll_d7", "main_h156m", 1, 1),
+ FACTOR(TOP_SYSPLL4_D2, "syspll4_d2", "main_h156m", 1, 2),
+ FACTOR(TOP_SYSPLL4_D4, "syspll4_d4", "main_h156m", 1, 4),
+
+ FACTOR(TOP_TVDPLL_CK, "tvdpll_ck", "tvdpll_594m", 1, 1),
+ FACTOR(TOP_TVDPLL_D2, "tvdpll_d2", "tvdpll_594m", 1, 2),
+ FACTOR(TOP_TVDPLL_D4, "tvdpll_d4", "tvdpll_594m", 1, 4),
+ FACTOR(TOP_TVDPLL_D8, "tvdpll_d8", "tvdpll_594m", 1, 8),
+ FACTOR(TOP_TVDPLL_D16, "tvdpll_d16", "tvdpll_594m", 1, 16),
+
+ FACTOR(TOP_UNIVPLL_D2, "univpll_d2", "univ_624m", 1, 1),
+ FACTOR(TOP_UNIVPLL1_D2, "univpll1_d2", "univ_624m", 1, 2),
+ FACTOR(TOP_UNIVPLL1_D4, "univpll1_d4", "univ_624m", 1, 4),
+ FACTOR(TOP_UNIVPLL1_D8, "univpll1_d8", "univ_624m", 1, 8),
+ FACTOR(TOP_UNIVPLL_D3, "univpll_d3", "univ_416m", 1, 1),
+ FACTOR(TOP_UNIVPLL2_D2, "univpll2_d2", "univ_416m", 1, 2),
+ FACTOR(TOP_UNIVPLL2_D4, "univpll2_d4", "univ_416m", 1, 4),
+ FACTOR(TOP_UNIVPLL2_D8, "univpll2_d8", "univ_416m", 1, 8),
+ FACTOR(TOP_UNIVPLL_D5, "univpll_d5", "univ_249p6m", 1, 1),
+ FACTOR(TOP_UNIVPLL3_D2, "univpll3_d2", "univ_249p6m", 1, 2),
+ FACTOR(TOP_UNIVPLL3_D4, "univpll3_d4", "univ_249p6m", 1, 4),
+ FACTOR(TOP_UNIVPLL3_D8, "univpll3_d8", "univ_249p6m", 1, 8),
+ FACTOR(TOP_UNIVPLL_D7, "univpll_d7", "univ_178p3m", 1, 1),
+ FACTOR(TOP_UNIVPLL_D26, "univpll_d26", "univ_48m", 1, 1),
+ FACTOR(TOP_UNIVPLL_D52, "univpll_d52", "univ_48m", 1, 2),
+
+ FACTOR(TOP_VCODECPLL_CK, "vcodecpll_ck", "vcodecpll", 1, 3),
+ FACTOR(TOP_VCODECPLL_370P5, "vcodecpll_370p5", "vcodecpll", 1, 4),
+
+ FACTOR(TOP_VENCPLL_CK, "vencpll_ck", "vencpll", 1, 1),
+ FACTOR(TOP_VENCPLL_D2, "vencpll_d2", "vencpll", 1, 2),
+ FACTOR(TOP_VENCPLL_D4, "vencpll_d4", "vencpll", 1, 4),
+};
+
+static const char * const axi_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d2",
+ "syspll_d5",
+ "syspll1_d4",
+ "univpll_d5",
+ "univpll2_d2",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const mem_parents[] __initconst = {
+ "clk26m",
+ "dmpll_ck"
+};
+
+static const char * const ddrphycfg_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d8"
+};
+
+static const char * const mm_parents[] __initconst = {
+ "clk26m",
+ "vencpll_d2",
+ "main_h364m",
+ "syspll1_d2",
+ "syspll_d5",
+ "syspll1_d4",
+ "univpll1_d2",
+ "univpll2_d2",
+ "dmpll_d2"
+};
+
+static const char * const pwm_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d4",
+ "univpll3_d2",
+ "univpll1_d4"
+};
+
+static const char * const vdec_parents[] __initconst = {
+ "clk26m",
+ "vcodecpll_ck",
+ "tvdpll_445p5m",
+ "univpll_d3",
+ "vencpll_d2",
+ "syspll_d3",
+ "univpll1_d2",
+ "mmpll_d2",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const venc_parents[] __initconst = {
+ "clk26m",
+ "vcodecpll_ck",
+ "tvdpll_445p5m",
+ "univpll_d3",
+ "vencpll_d2",
+ "syspll_d3",
+ "univpll1_d2",
+ "univpll2_d2",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const mfg_parents[] __initconst = {
+ "clk26m",
+ "mmpll_ck",
+ "dmpll_ck",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "syspll_d3",
+ "syspll1_d2",
+ "syspll_d5",
+ "univpll_d3",
+ "univpll1_d2",
+ "univpll_d5",
+ "univpll2_d2"
+};
+
+static const char * const camtg_parents[] __initconst = {
+ "clk26m",
+ "univpll_d26",
+ "univpll2_d2",
+ "syspll3_d2",
+ "syspll3_d4",
+ "univpll1_d4"
+};
+
+static const char * const uart_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d8"
+};
+
+static const char * const spi_parents[] __initconst = {
+ "clk26m",
+ "syspll3_d2",
+ "syspll1_d4",
+ "syspll4_d2",
+ "univpll3_d2",
+ "univpll2_d4",
+ "univpll1_d8"
+};
+
+static const char * const usb20_parents[] __initconst = {
+ "clk26m",
+ "univpll1_d8",
+ "univpll3_d4"
+};
+
+static const char * const usb30_parents[] __initconst = {
+ "clk26m",
+ "univpll3_d2",
+ "usb_syspll_125m",
+ "univpll2_d4"
+};
+
+static const char * const msdc50_0_h_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d2",
+ "syspll2_d2",
+ "syspll4_d2",
+ "univpll_d5",
+ "univpll1_d4"
+};
+
+static const char * const msdc50_0_parents[] __initconst = {
+ "clk26m",
+ "msdcpll_ck",
+ "msdcpll_d2",
+ "univpll1_d4",
+ "syspll2_d2",
+ "syspll_d7",
+ "msdcpll_d4",
+ "vencpll_d4",
+ "tvdpll_ck",
+ "univpll_d2",
+ "univpll1_d2",
+ "mmpll_ck",
+ "msdcpll2_ck",
+ "msdcpll2_d2",
+ "msdcpll2_d4"
+};
+
+static const char * const msdc30_1_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d2",
+ "msdcpll_d4",
+ "univpll1_d4",
+ "syspll2_d2",
+ "syspll_d7",
+ "univpll_d7",
+ "vencpll_d4"
+};
+
+static const char * const msdc30_2_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d2",
+ "msdcpll_d4",
+ "univpll1_d4",
+ "syspll2_d2",
+ "syspll_d7",
+ "univpll_d7",
+ "vencpll_d2"
+};
+
+static const char * const msdc30_3_parents[] __initconst = {
+ "clk26m",
+ "msdcpll2_ck",
+ "msdcpll2_d2",
+ "univpll2_d2",
+ "msdcpll2_d4",
+ "msdcpll_d4",
+ "univpll1_d4",
+ "syspll2_d2",
+ "syspll_d7",
+ "univpll_d7",
+ "vencpll_d4",
+ "msdcpll_ck",
+ "msdcpll_d2",
+ "msdcpll_d4"
+};
+
+static const char * const audio_parents[] __initconst = {
+ "clk26m",
+ "syspll3_d4",
+ "syspll4_d4",
+ "syspll1_d16"
+};
+
+static const char * const aud_intbus_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d4",
+ "syspll4_d2",
+ "univpll3_d2",
+ "univpll2_d8",
+ "dmpll_d4",
+ "dmpll_d8"
+};
+
+static const char * const pmicspi_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d8",
+ "syspll3_d4",
+ "syspll1_d16",
+ "univpll3_d4",
+ "univpll_d26",
+ "dmpll_d8",
+ "dmpll_d16"
+};
+
+static const char * const scp_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d2",
+ "univpll_d5",
+ "syspll_d5",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const atb_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d2",
+ "univpll_d5",
+ "dmpll_d2"
+};
+
+static const char * const venc_lt_parents[] __initconst = {
+ "clk26m",
+ "univpll_d3",
+ "vcodecpll_ck",
+ "tvdpll_445p5m",
+ "vencpll_d2",
+ "syspll_d3",
+ "univpll1_d2",
+ "univpll2_d2",
+ "syspll1_d2",
+ "univpll_d5",
+ "vcodecpll_370p5",
+ "dmpll_ck"
+};
+
+static const char * const dpi0_parents[] __initconst = {
+ "clk26m",
+ "tvdpll_d2",
+ "tvdpll_d4",
+ "clk26m",
+ "clk26m",
+ "tvdpll_d8",
+ "tvdpll_d16"
+};
+
+static const char * const irda_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d4",
+ "syspll2_d4"
+};
+
+static const char * const cci400_parents[] __initconst = {
+ "clk26m",
+ "vencpll_ck",
+ "armca7pll_754m",
+ "armca7pll_502m",
+ "univpll_d2",
+ "syspll_d2",
+ "msdcpll_ck",
+ "dmpll_ck"
+};
+
+static const char * const aud_1_parents[] __initconst = {
+ "clk26m",
+ "apll1_ck",
+ "univpll2_d4",
+ "univpll2_d8"
+};
+
+static const char * const aud_2_parents[] __initconst = {
+ "clk26m",
+ "apll2_ck",
+ "univpll2_d4",
+ "univpll2_d8"
+};
+
+static const char * const mem_mfg_in_parents[] __initconst = {
+ "clk26m",
+ "mmpll_ck",
+ "dmpll_ck",
+ "clk26m"
+};
+
+static const char * const axi_mfg_in_parents[] __initconst = {
+ "clk26m",
+ "axi_sel",
+ "dmpll_d2"
+};
+
+static const char * const scam_parents[] __initconst = {
+ "clk26m",
+ "syspll3_d2",
+ "univpll2_d4",
+ "dmpll_d4"
+};
+
+static const char * const spinfi_ifr_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d8",
+ "univpll3_d4",
+ "syspll4_d2",
+ "univpll2_d4",
+ "univpll3_d2",
+ "syspll1_d4",
+ "univpll1_d4"
+};
+
+static const char * const hdmi_parents[] __initconst = {
+ "clk26m",
+ "hdmitx_dig_cts",
+ "hdmitxpll_d2",
+ "hdmitxpll_d3"
+};
+
+static const char * const dpilvds_parents[] __initconst = {
+ "clk26m",
+ "lvdspll",
+ "lvdspll_d2",
+ "lvdspll_d4",
+ "lvdspll_d8",
+ "fpc_ck"
+};
+
+static const char * const msdc50_2_h_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d2",
+ "syspll2_d2",
+ "syspll4_d2",
+ "univpll_d5",
+ "univpll1_d4"
+};
+
+static const char * const hdcp_parents[] __initconst = {
+ "clk26m",
+ "syspll4_d2",
+ "syspll3_d4",
+ "univpll2_d4"
+};
+
+static const char * const hdcp_24m_parents[] __initconst = {
+ "clk26m",
+ "univpll_d26",
+ "univpll_d52",
+ "univpll2_d8"
+};
+
+static const char * const rtc_parents[] __initconst = {
+ "clkrtc_int",
+ "clkrtc_ext",
+ "clk26m",
+ "univpll3_d8"
+};
+
+static const char * const i2s0_m_ck_parents[] __initconst = {
+ "apll1_div1",
+ "apll2_div1"
+};
+
+static const char * const i2s1_m_ck_parents[] __initconst = {
+ "apll1_div2",
+ "apll2_div2"
+};
+
+static const char * const i2s2_m_ck_parents[] __initconst = {
+ "apll1_div3",
+ "apll2_div3"
+};
+
+static const char * const i2s3_m_ck_parents[] __initconst = {
+ "apll1_div4",
+ "apll2_div4"
+};
+
+static const char * const i2s3_b_ck_parents[] __initconst = {
+ "apll1_div5",
+ "apll2_div5"
+};
+
+static const struct mtk_composite top_muxes[] __initconst = {
+ /* CLK_CFG_0 */
+ MUX(TOP_AXI_SEL, "axi_sel", axi_parents, 0x0040, 0, 3),
+ MUX(TOP_MEM_SEL, "mem_sel", mem_parents, 0x0040, 8, 1),
+ MUX_GATE(TOP_DDRPHYCFG_SEL, "ddrphycfg_sel", ddrphycfg_parents, 0x0040, 16, 1, 23),
+ MUX_GATE(TOP_MM_SEL, "mm_sel", mm_parents, 0x0040, 24, 4, 31),
+ /* CLK_CFG_1 */
+ MUX_GATE(TOP_PWM_SEL, "pwm_sel", pwm_parents, 0x0050, 0, 2, 7),
+ MUX_GATE(TOP_VDEC_SEL, "vdec_sel", vdec_parents, 0x0050, 8, 4, 15),
+ MUX_GATE(TOP_VENC_SEL, "venc_sel", venc_parents, 0x0050, 16, 4, 23),
+ MUX_GATE(TOP_MFG_SEL, "mfg_sel", mfg_parents, 0x0050, 24, 4, 31),
+ /* CLK_CFG_2 */
+ MUX_GATE(TOP_CAMTG_SEL, "camtg_sel", camtg_parents, 0x0060, 0, 3, 7),
+ MUX_GATE(TOP_UART_SEL, "uart_sel", uart_parents, 0x0060, 8, 1, 15),
+ MUX_GATE(TOP_SPI_SEL, "spi_sel", spi_parents, 0x0060, 16, 3, 23),
+ MUX_GATE(TOP_USB20_SEL, "usb20_sel", usb20_parents, 0x0060, 24, 2, 31),
+ /* CLK_CFG_3 */
+ MUX_GATE(TOP_USB30_SEL, "usb30_sel", usb30_parents, 0x0070, 0, 2, 7),
+ MUX_GATE(TOP_MSDC50_0_H_SEL, "msdc50_0_h_sel", msdc50_0_h_parents, 0x0070, 8, 3, 15),
+ MUX_GATE(TOP_MSDC50_0_SEL, "msdc50_0_sel", msdc50_0_parents, 0x0070, 16, 4, 23),
+ MUX_GATE(TOP_MSDC30_1_SEL, "msdc30_1_sel", msdc30_1_parents, 0x0070, 24, 3, 31),
+ /* CLK_CFG_4 */
+ MUX_GATE(TOP_MSDC30_2_SEL, "msdc30_2_sel", msdc30_2_parents, 0x0080, 0, 3, 7),
+ MUX_GATE(TOP_MSDC30_3_SEL, "msdc30_3_sel", msdc30_3_parents, 0x0080, 8, 4, 15),
+ MUX_GATE(TOP_AUDIO_SEL, "audio_sel", audio_parents, 0x0080, 16, 2, 23),
+ MUX_GATE(TOP_AUD_INTBUS_SEL, "aud_intbus_sel", aud_intbus_parents, 0x0080, 24, 3, 31),
+ /* CLK_CFG_5 */
+ MUX_GATE(TOP_PMICSPI_SEL, "pmicspi_sel", pmicspi_parents, 0x0090, 0, 3, 7 /* 7:5 */),
+ MUX_GATE(TOP_SCP_SEL, "scp_sel", scp_parents, 0x0090, 8, 3, 15),
+ MUX_GATE(TOP_ATB_SEL, "atb_sel", atb_parents, 0x0090, 16, 2, 23),
+ MUX_GATE(TOP_VENC_LT_SEL, "venclt_sel", venc_lt_parents, 0x0090, 24, 4, 31),
+ /* CLK_CFG_6 */
+ MUX_GATE(TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7),
+ MUX_GATE(TOP_IRDA_SEL, "irda_sel", irda_parents, 0x00a0, 8, 2, 15),
+ MUX_GATE(TOP_CCI400_SEL, "cci400_sel", cci400_parents, 0x00a0, 16, 3, 23),
+ MUX_GATE(TOP_AUD_1_SEL, "aud_1_sel", aud_1_parents, 0x00a0, 24, 2, 31),
+ /* CLK_CFG_7 */
+ MUX_GATE(TOP_AUD_2_SEL, "aud_2_sel", aud_2_parents, 0x00b0, 0, 2, 7),
+ MUX_GATE(TOP_MEM_MFG_IN_SEL, "mem_mfg_in_sel", mem_mfg_in_parents, 0x00b0, 8, 2, 15),
+ MUX_GATE(TOP_AXI_MFG_IN_SEL, "axi_mfg_in_sel", axi_mfg_in_parents, 0x00b0, 16, 2, 23),
+ MUX_GATE(TOP_SCAM_SEL, "scam_sel", scam_parents, 0x00b0, 24, 2, 31),
+ /* CLK_CFG_12 */
+ MUX_GATE(TOP_SPINFI_IFR_SEL, "spinfi_ifr_sel", spinfi_ifr_parents, 0x00c0, 0, 3, 7),
+ MUX_GATE(TOP_HDMI_SEL, "hdmi_sel", hdmi_parents, 0x00c0, 8, 2, 15),
+ MUX_GATE(TOP_DPILVDS_SEL, "dpilvds_sel", dpilvds_parents, 0x00c0, 24, 3, 31),
+ /* CLK_CFG_13 */
+ MUX_GATE(TOP_MSDC50_2_H_SEL, "msdc50_2_h_sel", msdc50_2_h_parents, 0x00d0, 0, 3, 7),
+ MUX_GATE(TOP_HDCP_SEL, "hdcp_sel", hdcp_parents, 0x00d0, 8, 2, 15),
+ MUX_GATE(TOP_HDCP_24M_SEL, "hdcp_24m_sel", hdcp_24m_parents, 0x00d0, 16, 2, 23),
+ MUX(TOP_RTC_SEL, "rtc_sel", rtc_parents, 0x00d0, 24, 2),
+
+ DIV_GATE(TOP_APLL1_DIV0, "apll1_div0", "aud_1_sel", 0x12c, 8, 0x120, 4, 24),
+ DIV_GATE(TOP_APLL1_DIV1, "apll1_div1", "aud_1_sel", 0x12c, 9, 0x124, 8, 0),
+ DIV_GATE(TOP_APLL1_DIV2, "apll1_div2", "aud_1_sel", 0x12c, 10, 0x124, 8, 8),
+ DIV_GATE(TOP_APLL1_DIV3, "apll1_div3", "aud_1_sel", 0x12c, 11, 0x124, 8, 16),
+ DIV_GATE(TOP_APLL1_DIV4, "apll1_div4", "aud_1_sel", 0x12c, 12, 0x124, 8, 24),
+ DIV_GATE(TOP_APLL1_DIV5, "apll1_div5", "aud_1_sel", 0x12c, 13, 0x12c, 4, 0),
+
+ DIV_GATE(TOP_APLL2_DIV0, "apll2_div0", "aud_2_sel", 0x12c, 16, 0x120, 4, 28),
+ DIV_GATE(TOP_APLL2_DIV1, "apll2_div1", "aud_2_sel", 0x12c, 17, 0x128, 8, 0),
+ DIV_GATE(TOP_APLL2_DIV2, "apll2_div2", "aud_2_sel", 0x12c, 18, 0x128, 8, 8),
+ DIV_GATE(TOP_APLL2_DIV3, "apll2_div3", "aud_2_sel", 0x12c, 19, 0x128, 8, 16),
+ DIV_GATE(TOP_APLL2_DIV4, "apll2_div4", "aud_2_sel", 0x12c, 20, 0x128, 8, 24),
+ DIV_GATE(TOP_APLL2_DIV5, "apll2_div5", "aud_2_sel", 0x12c, 21, 0x12c, 4, 4),
+
+ MUX(TOP_I2S0_M_CK_SEL, "i2s0_m_ck_sel", i2s0_m_ck_parents, 0x120, 4, 1),
+ MUX(TOP_I2S1_M_CK_SEL, "i2s1_m_ck_sel", i2s1_m_ck_parents, 0x120, 5, 1),
+ MUX(TOP_I2S2_M_CK_SEL, "i2s2_m_ck_sel", i2s2_m_ck_parents, 0x120, 6, 1),
+ MUX(TOP_I2S3_M_CK_SEL, "i2s3_m_ck_sel", i2s3_m_ck_parents, 0x120, 7, 1),
+ MUX(TOP_I2S3_B_CK_SEL, "i2s3_b_ck_sel", i2s3_b_ck_parents, 0x120, 8, 1),
+};
+
+static void __init mtk_init_clk_topckgen(void __iomem *top_base,
+ struct clk_onecell_data *clk_data)
+{
+ int i;
+ struct clk *clk;
+
+ for (i = 0; i < ARRAY_SIZE(top_muxes); i++) {
+ const struct mtk_composite *mux = &top_muxes[i];
+
+ clk = mtk_clk_register_composite(mux, top_base, &lock);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ mux->name, PTR_ERR(clk));
+ continue;
+ }
+
+ if (clk_data)
+ clk_data->clks[mux->id] = clk;
+ }
+}
+
+static const struct mtk_gate_regs infra_cg_regs = {
+ .set_ofs = 0x0040,
+ .clr_ofs = 0x0044,
+ .sta_ofs = 0x0048,
+};
+
+#define GATE_ICG(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &infra_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate infra_clks[] __initconst = {
+ GATE_ICG(INFRA_DBGCLK, "infra_dbgclk", "axi_sel", 0),
+ GATE_ICG(INFRA_SMI, "infra_smi", "mm_sel", 1),
+ GATE_ICG(INFRA_AUDIO, "infra_audio", "aud_intbus_sel", 5),
+ GATE_ICG(INFRA_GCE, "infra_gce", "axi_sel", 6),
+ GATE_ICG(INFRA_L2C_SRAM, "infra_l2c_sram", "axi_sel", 7),
+ GATE_ICG(INFRA_M4U, "infra_m4u", "mem_sel", 8),
+ GATE_ICG(INFRA_CPUM, "infra_cpum", "clk_null", 15),
+ GATE_ICG(INFRA_KP, "infra_kp", "axi_sel", 16),
+ GATE_ICG(INFRA_CEC, "infra_cec", "clk26m", 18),
+ GATE_ICG(INFRA_PMICSPI, "infra_pmicspi", "pmicspi_sel", 22),
+ GATE_ICG(INFRA_PMICWRAP, "infra_pmicwrap", "axi_sel", 23),
+};
+
+static const struct mtk_gate_regs peri0_cg_regs = {
+ .set_ofs = 0x0008,
+ .clr_ofs = 0x0010,
+ .sta_ofs = 0x0018,
+};
+
+static const struct mtk_gate_regs peri1_cg_regs = {
+ .set_ofs = 0x000c,
+ .clr_ofs = 0x0014,
+ .sta_ofs = 0x001c,
+};
+
+#define GATE_PERI0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &peri0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+#define GATE_PERI1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &peri1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate peri_clks[] __initconst = {
+ /* PERI0 */
+ GATE_PERI0(PERI_NFI, "peri_nfi", "axi_sel", 0),
+ GATE_PERI0(PERI_THERM, "peri_therm", "axi_sel", 1),
+ GATE_PERI0(PERI_PWM1, "peri_pwm1", "axi_sel", 2),
+ GATE_PERI0(PERI_PWM2, "peri_pwm2", "axi_sel", 3),
+ GATE_PERI0(PERI_PWM3, "peri_pwm3", "axi_sel", 4),
+ GATE_PERI0(PERI_PWM4, "peri_pwm4", "axi_sel", 5),
+ GATE_PERI0(PERI_PWM5, "peri_pwm5", "axi_sel", 6),
+ GATE_PERI0(PERI_PWM6, "peri_pwm6", "axi_sel", 7),
+ GATE_PERI0(PERI_PWM7, "peri_pwm7", "axi_sel", 8),
+ GATE_PERI0(PERI_PWM, "peri_pwm", "axi_sel", 9),
+ GATE_PERI0(PERI_USB0, "peri_usb0", "usb20_sel", 10),
+ GATE_PERI0(PERI_USB1, "peri_usb1", "usb20_sel", 11),
+ GATE_PERI0(PERI_AP_DMA, "peri_ap_dma", "axi_sel", 12),
+ GATE_PERI0(PERI_MSDC30_0, "peri_msdc30_0", "msdc50_0_sel", 13),
+ GATE_PERI0(PERI_MSDC30_1, "peri_msdc30_1", "msdc30_1_sel", 14),
+ GATE_PERI0(PERI_MSDC30_2, "peri_msdc30_2", "msdc30_2_sel", 15),
+ GATE_PERI0(PERI_MSDC30_3, "peri_msdc30_3", "msdc30_3_sel", 16),
+ GATE_PERI0(PERI_NLI_ARB, "peri_nli_arb", "axi_sel", 17),
+ GATE_PERI0(PERI_IRDA, "peri_irda", "irda_sel", 18),
+ GATE_PERI0(PERI_UART0, "peri_uart0", "uart_sel", 19),
+ GATE_PERI0(PERI_UART1, "peri_uart1", "uart_sel", 20),
+ GATE_PERI0(PERI_UART2, "peri_uart2", "uart_sel", 21),
+ GATE_PERI0(PERI_UART3, "peri_uart3", "uart_sel", 22),
+ GATE_PERI0(PERI_I2C0, "peri_i2c0", "axi_sel", 23),
+ GATE_PERI0(PERI_I2C1, "peri_i2c1", "axi_sel", 24),
+ GATE_PERI0(PERI_I2C2, "peri_i2c2", "axi_sel", 25),
+ GATE_PERI0(PERI_I2C3, "peri_i2c3", "axi_sel", 26),
+ GATE_PERI0(PERI_I2C4, "peri_i2c4", "axi_sel", 27),
+ GATE_PERI0(PERI_AUXADC, "peri_auxadc", "clk26m", 28),
+ GATE_PERI0(PERI_SPI0, "peri_spi0", "spi_sel", 29),
+ GATE_PERI0(PERI_I2C5, "peri_i2c5", "axi_sel", 30),
+ GATE_PERI0(PERI_NFIECC, "peri_nfiecc", "axi_sel", 31),
+ /* PERI1 */
+ GATE_PERI1(PERI_SPI, "peri_spi", "spi_sel", 0),
+ GATE_PERI1(PERI_IRRX, "peri_irrx", "spi_sel", 1),
+ GATE_PERI1(PERI_I2C6, "peri_i2c6", "axi_sel", 2),
+};
+
+static void __init mtk_topckgen_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ void __iomem *base;
+ int r;
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("%s(): ioremap failed\n", __func__);
+ return;
+ }
+
+ clk_data = mtk_alloc_clk_data(TOP_NR_CLK);
+
+ mtk_clk_register_factors(root_clk_alias, ARRAY_SIZE(root_clk_alias), clk_data);
+ mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
+ mtk_init_clk_topckgen(base, clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+}
+CLK_OF_DECLARE(mtk_topckgen, "mediatek,mt8173-topckgen", mtk_topckgen_init);
+
+static void __init mtk_infrasys_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(INFRA_NR_CLK);
+
+ mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ mtk_register_reset_controller(node, 2, 0x30);
+}
+CLK_OF_DECLARE(mtk_infrasys, "mediatek,mt8173-infracfg", mtk_infrasys_init);
+
+static void __init mtk_pericfg_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(PERI_NR_CLK);
+
+ mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ mtk_register_reset_controller(node, 2, 0);
+}
+CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt8173-pericfg", mtk_pericfg_init);
+
+#define MT8173_PLL_FMAX (3000UL * MHZ)
+
+#define CON0_MT8173_RST_BAR BIT(24)
+
+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, _pd_shift, \
+ _tuner_reg, _pcw_reg, _pcw_shift) { \
+ .id = _id, \
+ .name = _name, \
+ .reg = _reg, \
+ .pwr_reg = _pwr_reg, \
+ .en_mask = _en_mask, \
+ .flags = _flags, \
+ .rst_bar_mask = CON0_MT8173_RST_BAR, \
+ .fmax = MT8173_PLL_FMAX, \
+ .pcwbits = _pcwbits, \
+ .pd_reg = _pd_reg, \
+ .pd_shift = _pd_shift, \
+ .tuner_reg = _tuner_reg, \
+ .pcw_reg = _pcw_reg, \
+ .pcw_shift = _pcw_shift, \
+ }
+
+static const struct mtk_pll_data plls[] = {
+ PLL(APMIXED_ARMCA15PLL, "armca15pll", 0x200, 0x20c, 0x00000001, 0, 21, 0x204, 24, 0x0, 0x204, 0),
+ PLL(APMIXED_ARMCA7PLL, "armca7pll", 0x210, 0x21c, 0x00000001, 0, 21, 0x214, 24, 0x0, 0x214, 0),
+ PLL(APMIXED_MAINPLL, "mainpll", 0x220, 0x22c, 0xf0000101, HAVE_RST_BAR, 21, 0x220, 4, 0x0, 0x224, 0),
+ PLL(APMIXED_UNIVPLL, "univpll", 0x230, 0x23c, 0xfe000001, HAVE_RST_BAR, 7, 0x230, 4, 0x0, 0x234, 14),
+ PLL(APMIXED_MMPLL, "mmpll", 0x240, 0x24c, 0x00000001, 0, 21, 0x244, 24, 0x0, 0x244, 0),
+ PLL(APMIXED_MSDCPLL, "msdcpll", 0x250, 0x25c, 0x00000001, 0, 21, 0x250, 4, 0x0, 0x254, 0),
+ PLL(APMIXED_VENCPLL, "vencpll", 0x260, 0x26c, 0x00000001, 0, 21, 0x260, 4, 0x0, 0x264, 0),
+ PLL(APMIXED_TVDPLL, "tvdpll", 0x270, 0x27c, 0x00000001, 0, 21, 0x270, 4, 0x0, 0x274, 0),
+ PLL(APMIXED_MPLL, "mpll", 0x280, 0x28c, 0x00000001, 0, 21, 0x280, 4, 0x0, 0x284, 0),
+ PLL(APMIXED_VCODECPLL, "vcodecpll", 0x290, 0x29c, 0x00000001, 0, 21, 0x290, 4, 0x0, 0x294, 0),
+ PLL(APMIXED_APLL1, "apll1", 0x2a0, 0x2b0, 0x00000001, 0, 31, 0x2a0, 4, 0x2a4, 0x2a4, 0),
+ PLL(APMIXED_APLL2, "apll2", 0x2b4, 0x2c4, 0x00000001, 0, 31, 0x2b4, 4, 0x2b8, 0x2b8, 0),
+ PLL(APMIXED_LVDSPLL, "lvdspll", 0x2d0, 0x2dc, 0x00000001, 0, 21, 0x2d0, 4, 0x0, 0x2d4, 0),
+ PLL(APMIXED_MSDCPLL2, "msdcpll2", 0x2f0, 0x2fc, 0x00000001, 0, 21, 0x2f0, 4, 0x0, 0x2f4, 0),
+};
+
+static void __init mtk_apmixedsys_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+
+ clk_data = mtk_alloc_clk_data(ARRAY_SIZE(plls));
+ if (!clk_data)
+ return;
+
+ mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
+}
+CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt8173-apmixedsys",
+ mtk_apmixedsys_init);
diff --git a/include/dt-bindings/clock/mt8173-clk.h b/include/dt-bindings/clock/mt8173-clk.h
new file mode 100644
index 0000000..e648b28
--- /dev/null
+++ b/include/dt-bindings/clock/mt8173-clk.h
@@ -0,0 +1,231 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_MT8173_H
+#define _DT_BINDINGS_CLK_MT8173_H
+
+/* TOPCKGEN */
+
+#define TOP_CLKPH_MCK_O 1
+#define TOP_DPI_CK 2
+#define TOP_USB_SYSPLL_125M 3
+#define TOP_HDMITX_DIG_CTS 4
+#define TOP_ARMCA7PLL_754M 5
+#define TOP_ARMCA7PLL_502M 6
+#define TOP_MAIN_H546M 7
+#define TOP_MAIN_H364M 8
+#define TOP_MAIN_H218P4M 9
+#define TOP_MAIN_H156M 10
+#define TOP_TVDPLL_445P5M 11
+#define TOP_TVDPLL_594M 12
+#define TOP_UNIV_624M 13
+#define TOP_UNIV_416M 14
+#define TOP_UNIV_249P6M 15
+#define TOP_UNIV_178P3M 16
+#define TOP_UNIV_48M 17
+#define TOP_CLKRTC_EXT 18
+#define TOP_CLKRTC_INT 19
+#define TOP_FPC_CK 20
+#define TOP_HDMITXPLL_D2 21
+#define TOP_HDMITXPLL_D3 22
+#define TOP_ARMCA7PLL_D2 23
+#define TOP_ARMCA7PLL_D3 24
+#define TOP_APLL1_CK 25
+#define TOP_APLL2_CK 26
+#define TOP_DMPLL_CK 27
+#define TOP_DMPLL_D2 28
+#define TOP_DMPLL_D4 29
+#define TOP_DMPLL_D8 30
+#define TOP_DMPLL_D16 31
+#define TOP_LVDSPLL_D2 32
+#define TOP_LVDSPLL_D4 33
+#define TOP_LVDSPLL_D8 34
+#define TOP_MMPLL_CK 35
+#define TOP_MMPLL_D2 36
+#define TOP_MSDCPLL_CK 37
+#define TOP_MSDCPLL_D2 38
+#define TOP_MSDCPLL_D4 39
+#define TOP_MSDCPLL2_CK 40
+#define TOP_MSDCPLL2_D2 41
+#define TOP_MSDCPLL2_D4 42
+#define TOP_SYSPLL_D2 43
+#define TOP_SYSPLL1_D2 44
+#define TOP_SYSPLL1_D4 45
+#define TOP_SYSPLL1_D8 46
+#define TOP_SYSPLL1_D16 47
+#define TOP_SYSPLL_D3 48
+#define TOP_SYSPLL2_D2 49
+#define TOP_SYSPLL2_D4 50
+#define TOP_SYSPLL_D5 51
+#define TOP_SYSPLL3_D2 52
+#define TOP_SYSPLL3_D4 53
+#define TOP_SYSPLL_D7 54
+#define TOP_SYSPLL4_D2 55
+#define TOP_SYSPLL4_D4 56
+#define TOP_TVDPLL_CK 57
+#define TOP_TVDPLL_D2 58
+#define TOP_TVDPLL_D4 59
+#define TOP_TVDPLL_D8 60
+#define TOP_TVDPLL_D16 61
+#define TOP_UNIVPLL_D2 62
+#define TOP_UNIVPLL1_D2 63
+#define TOP_UNIVPLL1_D4 64
+#define TOP_UNIVPLL1_D8 65
+#define TOP_UNIVPLL_D3 66
+#define TOP_UNIVPLL2_D2 67
+#define TOP_UNIVPLL2_D4 68
+#define TOP_UNIVPLL2_D8 69
+#define TOP_UNIVPLL_D5 70
+#define TOP_UNIVPLL3_D2 71
+#define TOP_UNIVPLL3_D4 72
+#define TOP_UNIVPLL3_D8 73
+#define TOP_UNIVPLL_D7 74
+#define TOP_UNIVPLL_D26 75
+#define TOP_UNIVPLL_D52 76
+#define TOP_VCODECPLL_CK 77
+#define TOP_VCODECPLL_370P5 78
+#define TOP_VENCPLL_CK 79
+#define TOP_VENCPLL_D2 80
+#define TOP_VENCPLL_D4 81
+#define TOP_AXI_SEL 82
+#define TOP_MEM_SEL 83
+#define TOP_DDRPHYCFG_SEL 84
+#define TOP_MM_SEL 85
+#define TOP_PWM_SEL 86
+#define TOP_VDEC_SEL 87
+#define TOP_VENC_SEL 88
+#define TOP_MFG_SEL 89
+#define TOP_CAMTG_SEL 90
+#define TOP_UART_SEL 91
+#define TOP_SPI_SEL 92
+#define TOP_USB20_SEL 93
+#define TOP_USB30_SEL 94
+#define TOP_MSDC50_0_H_SEL 95
+#define TOP_MSDC50_0_SEL 96
+#define TOP_MSDC30_1_SEL 97
+#define TOP_MSDC30_2_SEL 98
+#define TOP_MSDC30_3_SEL 99
+#define TOP_AUDIO_SEL 100
+#define TOP_AUD_INTBUS_SEL 101
+#define TOP_PMICSPI_SEL 102
+#define TOP_SCP_SEL 103
+#define TOP_ATB_SEL 104
+#define TOP_VENC_LT_SEL 105
+#define TOP_DPI0_SEL 106
+#define TOP_IRDA_SEL 107
+#define TOP_CCI400_SEL 108
+#define TOP_AUD_1_SEL 109
+#define TOP_AUD_2_SEL 110
+#define TOP_MEM_MFG_IN_SEL 111
+#define TOP_AXI_MFG_IN_SEL 112
+#define TOP_SCAM_SEL 113
+#define TOP_SPINFI_IFR_SEL 114
+#define TOP_HDMI_SEL 115
+#define TOP_DPILVDS_SEL 116
+#define TOP_MSDC50_2_H_SEL 117
+#define TOP_HDCP_SEL 118
+#define TOP_HDCP_24M_SEL 119
+#define TOP_RTC_SEL 120
+#define TOP_APLL1_DIV0 121
+#define TOP_APLL1_DIV1 122
+#define TOP_APLL1_DIV2 123
+#define TOP_APLL1_DIV3 124
+#define TOP_APLL1_DIV4 125
+#define TOP_APLL1_DIV5 126
+#define TOP_APLL2_DIV0 127
+#define TOP_APLL2_DIV1 128
+#define TOP_APLL2_DIV2 129
+#define TOP_APLL2_DIV3 130
+#define TOP_APLL2_DIV4 131
+#define TOP_APLL2_DIV5 132
+#define TOP_I2S0_M_CK_SEL 133
+#define TOP_I2S1_M_CK_SEL 134
+#define TOP_I2S2_M_CK_SEL 135
+#define TOP_I2S3_M_CK_SEL 136
+#define TOP_I2S3_B_CK_SEL 137
+#define TOP_NR_CLK 138
+
+/* APMIXED_SYS */
+
+#define APMIXED_ARMCA15PLL 1
+#define APMIXED_ARMCA7PLL 2
+#define APMIXED_MAINPLL 3
+#define APMIXED_UNIVPLL 4
+#define APMIXED_MMPLL 5
+#define APMIXED_MSDCPLL 6
+#define APMIXED_VENCPLL 7
+#define APMIXED_TVDPLL 8
+#define APMIXED_MPLL 9
+#define APMIXED_VCODECPLL 10
+#define APMIXED_APLL1 11
+#define APMIXED_APLL2 12
+#define APMIXED_LVDSPLL 13
+#define APMIXED_MSDCPLL2 14
+#define APMIXED_NR_CLK 15
+
+/* INFRA_SYS */
+
+#define INFRA_DBGCLK 1
+#define INFRA_SMI 2
+#define INFRA_AUDIO 3
+#define INFRA_GCE 4
+#define INFRA_L2C_SRAM 5
+#define INFRA_M4U 6
+#define INFRA_CPUM 7
+#define INFRA_KP 8
+#define INFRA_CEC 9
+#define INFRA_PMICSPI 10
+#define INFRA_PMICWRAP 11
+#define INFRA_NR_CLK 12
+
+/* PERI_SYS */
+
+#define PERI_NFI 1
+#define PERI_THERM 2
+#define PERI_PWM1 3
+#define PERI_PWM2 4
+#define PERI_PWM3 5
+#define PERI_PWM4 6
+#define PERI_PWM5 7
+#define PERI_PWM6 8
+#define PERI_PWM7 9
+#define PERI_PWM 10
+#define PERI_USB0 11
+#define PERI_USB1 12
+#define PERI_AP_DMA 13
+#define PERI_MSDC30_0 14
+#define PERI_MSDC30_1 15
+#define PERI_MSDC30_2 16
+#define PERI_MSDC30_3 17
+#define PERI_NLI_ARB 18
+#define PERI_IRDA 19
+#define PERI_UART0 20
+#define PERI_UART1 21
+#define PERI_UART2 22
+#define PERI_UART3 23
+#define PERI_I2C0 24
+#define PERI_I2C1 25
+#define PERI_I2C2 26
+#define PERI_I2C3 27
+#define PERI_I2C4 28
+#define PERI_AUXADC 29
+#define PERI_SPI0 30
+#define PERI_I2C5 31
+#define PERI_NFIECC 32
+#define PERI_SPI 33
+#define PERI_IRRX 34
+#define PERI_I2C6 35
+#define PERI_NR_CLK 36
+
+#endif /* _DT_BINDINGS_CLK_MT8173_H */
diff --git a/include/dt-bindings/reset-controller/mt8173-resets.h b/include/dt-bindings/reset-controller/mt8173-resets.h
new file mode 100644
index 0000000..9464b37
--- /dev/null
+++ b/include/dt-bindings/reset-controller/mt8173-resets.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora Fu, MediaTek
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8173
+#define _DT_BINDINGS_RESET_CONTROLLER_MT8173
+
+/* INFRACFG resets */
+#define MT8173_INFRA_EMI_REG_RST 0
+#define MT8173_INFRA_DRAMC0_A0_RST 1
+#define MT8173_INFRA_APCIRQ_EINT_RST 3
+#define MT8173_INFRA_APXGPT_RST 4
+#define MT8173_INFRA_SCPSYS_RST 5
+#define MT8173_INFRA_KP_RST 6
+#define MT8173_INFRA_PMIC_WRAP_RST 7
+#define MT8173_INFRA_MPIP_RST 8
+#define MT8173_INFRA_CEC_RST 9
+#define MT8173_INFRA_EMI_RST 32
+#define MT8173_INFRA_DRAMC0_RST 34
+#define MT8173_INFRA_APMIXEDSYS_RST 35
+#define MT8173_INFRA_MIPI_DSI_RST 36
+#define MT8173_INFRA_TRNG_RST 37
+#define MT8173_INFRA_SYSIRQ_RST 38
+#define MT8173_INFRA_MIPI_CSI_RST 39
+#define MT8173_INFRA_GCE_FAXI_RST 40
+#define MT8173_INFRA_MMIOMMURST 47
+
+
+/* PERICFG resets */
+#define MT8173_PERI_UART0_SW_RST 0
+#define MT8173_PERI_UART1_SW_RST 1
+#define MT8173_PERI_UART2_SW_RST 2
+#define MT8173_PERI_UART3_SW_RST 3
+#define MT8173_PERI_IRRX_SW_RST 4
+#define MT8173_PERI_PWM_SW_RST 8
+#define MT8173_PERI_AUXADC_SW_RST 10
+#define MT8173_PERI_DMA_SW_RST 11
+#define MT8173_PERI_I2C6_SW_RST 13
+#define MT8173_PERI_NFI_SW_RST 14
+#define MT8173_PERI_THERM_SW_RST 16
+#define MT8173_PERI_MSDC2_SW_RST 17
+#define MT8173_PERI_MSDC3_SW_RST 18
+#define MT8173_PERI_MSDC0_SW_RST 19
+#define MT8173_PERI_MSDC1_SW_RST 20
+#define MT8173_PERI_I2C0_SW_RST 22
+#define MT8173_PERI_I2C1_SW_RST 23
+#define MT8173_PERI_I2C2_SW_RST 24
+#define MT8173_PERI_I2C3_SW_RST 25
+#define MT8173_PERI_I2C4_SW_RST 26
+#define MT8173_PERI_HDMI_SW_RST 29
+#define MT8173_PERI_SPI0_SW_RST 33
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8173 */
--
2.1.4
^ permalink raw reply related [flat|nested] 53+ messages in thread* [PATCH 5/6] clk: mediatek: Add basic clocks for Mediatek MT8173.
@ 2015-03-19 8:42 ` Sascha Hauer
0 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: Mike Turquette
Cc: James Liao, Stephen Boyd, Sascha Hauer, YH Chen,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Henry Chen,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ, Matthias Brugger, Yingjoe Chen,
Eddie Huang, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
From: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
This patch adds basic clocks for MT8173, including TOPCKGEN, PLLs,
INFRA and PERI clocks.
Signed-off-by: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Henry Chen <henryc.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mt8173.c | 826 +++++++++++++++++++++
include/dt-bindings/clock/mt8173-clk.h | 231 ++++++
.../dt-bindings/reset-controller/mt8173-resets.h | 63 ++
4 files changed, 1121 insertions(+)
create mode 100644 drivers/clk/mediatek/clk-mt8173.c
create mode 100644 include/dt-bindings/clock/mt8173-clk.h
create mode 100644 include/dt-bindings/reset-controller/mt8173-resets.h
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 12ce576..8e4b2a4 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -1,3 +1,4 @@
obj-y += clk-mtk.o clk-pll.o clk-gate.o
obj-$(CONFIG_RESET_CONTROLLER) += reset.o
obj-y += clk-mt8135.o
+obj-y += clk-mt8173.o
diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
new file mode 100644
index 0000000..23fe863
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -0,0 +1,826 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt8173-clk.h>
+
+static DEFINE_SPINLOCK(lock);
+
+static const struct mtk_fixed_factor root_clk_alias[] __initconst = {
+ FACTOR(TOP_CLKPH_MCK_O, "clkph_mck_o", "clk_null", 1, 1),
+ FACTOR(TOP_DPI_CK, "dpi_ck", "clk_null", 1, 1),
+ FACTOR(TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk_null", 1, 1),
+ FACTOR(TOP_HDMITX_DIG_CTS, "hdmitx_dig_cts", "clk_null", 1, 1),
+};
+
+static const struct mtk_fixed_factor top_divs[] __initconst = {
+ FACTOR(TOP_ARMCA7PLL_754M, "armca7pll_754m", "armca7pll", 1, 2),
+ FACTOR(TOP_ARMCA7PLL_502M, "armca7pll_502m", "armca7pll", 1, 3),
+
+ FACTOR(TOP_MAIN_H546M, "main_h546m", "mainpll", 1, 2),
+ FACTOR(TOP_MAIN_H364M, "main_h364m", "mainpll", 1, 3),
+ FACTOR(TOP_MAIN_H218P4M, "main_h218p4m", "mainpll", 1, 5),
+ FACTOR(TOP_MAIN_H156M, "main_h156m", "mainpll", 1, 7),
+
+ FACTOR(TOP_TVDPLL_445P5M, "tvdpll_445p5m", "tvdpll", 1, 4),
+ FACTOR(TOP_TVDPLL_594M, "tvdpll_594m", "tvdpll", 1, 3),
+
+ FACTOR(TOP_UNIV_624M, "univ_624m", "univpll", 1, 2),
+ FACTOR(TOP_UNIV_416M, "univ_416m", "univpll", 1, 3),
+ FACTOR(TOP_UNIV_249P6M, "univ_249p6m", "univpll", 1, 5),
+ FACTOR(TOP_UNIV_178P3M, "univ_178p3m", "univpll", 1, 7),
+ FACTOR(TOP_UNIV_48M, "univ_48m", "univpll", 1, 26),
+
+ FACTOR(TOP_CLKRTC_EXT, "clkrtc_ext", "clk32k", 1, 1),
+ FACTOR(TOP_CLKRTC_INT, "clkrtc_int", "clk26m", 1, 793),
+ FACTOR(TOP_FPC_CK, "fpc_ck", "clk26m", 1, 1),
+
+ FACTOR(TOP_HDMITXPLL_D2, "hdmitxpll_d2", "hdmitx_dig_cts", 1, 2),
+ FACTOR(TOP_HDMITXPLL_D3, "hdmitxpll_d3", "hdmitx_dig_cts", 1, 3),
+
+ FACTOR(TOP_ARMCA7PLL_D2, "armca7pll_d2", "armca7pll_754m", 1, 1),
+ FACTOR(TOP_ARMCA7PLL_D3, "armca7pll_d3", "armca7pll_502m", 1, 1),
+
+ FACTOR(TOP_APLL1_CK, "apll1_ck", "apll1", 1, 1),
+ FACTOR(TOP_APLL2_CK, "apll2_ck", "apll2", 1, 1),
+
+ FACTOR(TOP_DMPLL_CK, "dmpll_ck", "clkph_mck_o", 1, 1),
+ FACTOR(TOP_DMPLL_D2, "dmpll_d2", "clkph_mck_o", 1, 2),
+ FACTOR(TOP_DMPLL_D4, "dmpll_d4", "clkph_mck_o", 1, 4),
+ FACTOR(TOP_DMPLL_D8, "dmpll_d8", "clkph_mck_o", 1, 8),
+ FACTOR(TOP_DMPLL_D16, "dmpll_d16", "clkph_mck_o", 1, 16),
+
+ FACTOR(TOP_LVDSPLL_D2, "lvdspll_d2", "lvdspll", 1, 2),
+ FACTOR(TOP_LVDSPLL_D4, "lvdspll_d4", "lvdspll", 1, 4),
+ FACTOR(TOP_LVDSPLL_D8, "lvdspll_d8", "lvdspll", 1, 8),
+
+ FACTOR(TOP_MMPLL_CK, "mmpll_ck", "mmpll", 1, 1),
+ FACTOR(TOP_MMPLL_D2, "mmpll_d2", "mmpll", 1, 2),
+
+ FACTOR(TOP_MSDCPLL_CK, "msdcpll_ck", "msdcpll", 1, 1),
+ FACTOR(TOP_MSDCPLL_D2, "msdcpll_d2", "msdcpll", 1, 2),
+ FACTOR(TOP_MSDCPLL_D4, "msdcpll_d4", "msdcpll", 1, 4),
+ FACTOR(TOP_MSDCPLL2_CK, "msdcpll2_ck", "msdcpll2", 1, 1),
+ FACTOR(TOP_MSDCPLL2_D2, "msdcpll2_d2", "msdcpll2", 1, 2),
+ FACTOR(TOP_MSDCPLL2_D4, "msdcpll2_d4", "msdcpll2", 1, 4),
+
+ FACTOR(TOP_SYSPLL_D2, "syspll_d2", "main_h546m", 1, 1),
+ FACTOR(TOP_SYSPLL1_D2, "syspll1_d2", "main_h546m", 1, 2),
+ FACTOR(TOP_SYSPLL1_D4, "syspll1_d4", "main_h546m", 1, 4),
+ FACTOR(TOP_SYSPLL1_D8, "syspll1_d8", "main_h546m", 1, 8),
+ FACTOR(TOP_SYSPLL1_D16, "syspll1_d16", "main_h546m", 1, 16),
+ FACTOR(TOP_SYSPLL_D3, "syspll_d3", "main_h364m", 1, 1),
+ FACTOR(TOP_SYSPLL2_D2, "syspll2_d2", "main_h364m", 1, 2),
+ FACTOR(TOP_SYSPLL2_D4, "syspll2_d4", "main_h364m", 1, 4),
+ FACTOR(TOP_SYSPLL_D5, "syspll_d5", "main_h218p4m", 1, 1),
+ FACTOR(TOP_SYSPLL3_D2, "syspll3_d2", "main_h218p4m", 1, 2),
+ FACTOR(TOP_SYSPLL3_D4, "syspll3_d4", "main_h218p4m", 1, 4),
+ FACTOR(TOP_SYSPLL_D7, "syspll_d7", "main_h156m", 1, 1),
+ FACTOR(TOP_SYSPLL4_D2, "syspll4_d2", "main_h156m", 1, 2),
+ FACTOR(TOP_SYSPLL4_D4, "syspll4_d4", "main_h156m", 1, 4),
+
+ FACTOR(TOP_TVDPLL_CK, "tvdpll_ck", "tvdpll_594m", 1, 1),
+ FACTOR(TOP_TVDPLL_D2, "tvdpll_d2", "tvdpll_594m", 1, 2),
+ FACTOR(TOP_TVDPLL_D4, "tvdpll_d4", "tvdpll_594m", 1, 4),
+ FACTOR(TOP_TVDPLL_D8, "tvdpll_d8", "tvdpll_594m", 1, 8),
+ FACTOR(TOP_TVDPLL_D16, "tvdpll_d16", "tvdpll_594m", 1, 16),
+
+ FACTOR(TOP_UNIVPLL_D2, "univpll_d2", "univ_624m", 1, 1),
+ FACTOR(TOP_UNIVPLL1_D2, "univpll1_d2", "univ_624m", 1, 2),
+ FACTOR(TOP_UNIVPLL1_D4, "univpll1_d4", "univ_624m", 1, 4),
+ FACTOR(TOP_UNIVPLL1_D8, "univpll1_d8", "univ_624m", 1, 8),
+ FACTOR(TOP_UNIVPLL_D3, "univpll_d3", "univ_416m", 1, 1),
+ FACTOR(TOP_UNIVPLL2_D2, "univpll2_d2", "univ_416m", 1, 2),
+ FACTOR(TOP_UNIVPLL2_D4, "univpll2_d4", "univ_416m", 1, 4),
+ FACTOR(TOP_UNIVPLL2_D8, "univpll2_d8", "univ_416m", 1, 8),
+ FACTOR(TOP_UNIVPLL_D5, "univpll_d5", "univ_249p6m", 1, 1),
+ FACTOR(TOP_UNIVPLL3_D2, "univpll3_d2", "univ_249p6m", 1, 2),
+ FACTOR(TOP_UNIVPLL3_D4, "univpll3_d4", "univ_249p6m", 1, 4),
+ FACTOR(TOP_UNIVPLL3_D8, "univpll3_d8", "univ_249p6m", 1, 8),
+ FACTOR(TOP_UNIVPLL_D7, "univpll_d7", "univ_178p3m", 1, 1),
+ FACTOR(TOP_UNIVPLL_D26, "univpll_d26", "univ_48m", 1, 1),
+ FACTOR(TOP_UNIVPLL_D52, "univpll_d52", "univ_48m", 1, 2),
+
+ FACTOR(TOP_VCODECPLL_CK, "vcodecpll_ck", "vcodecpll", 1, 3),
+ FACTOR(TOP_VCODECPLL_370P5, "vcodecpll_370p5", "vcodecpll", 1, 4),
+
+ FACTOR(TOP_VENCPLL_CK, "vencpll_ck", "vencpll", 1, 1),
+ FACTOR(TOP_VENCPLL_D2, "vencpll_d2", "vencpll", 1, 2),
+ FACTOR(TOP_VENCPLL_D4, "vencpll_d4", "vencpll", 1, 4),
+};
+
+static const char * const axi_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d2",
+ "syspll_d5",
+ "syspll1_d4",
+ "univpll_d5",
+ "univpll2_d2",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const mem_parents[] __initconst = {
+ "clk26m",
+ "dmpll_ck"
+};
+
+static const char * const ddrphycfg_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d8"
+};
+
+static const char * const mm_parents[] __initconst = {
+ "clk26m",
+ "vencpll_d2",
+ "main_h364m",
+ "syspll1_d2",
+ "syspll_d5",
+ "syspll1_d4",
+ "univpll1_d2",
+ "univpll2_d2",
+ "dmpll_d2"
+};
+
+static const char * const pwm_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d4",
+ "univpll3_d2",
+ "univpll1_d4"
+};
+
+static const char * const vdec_parents[] __initconst = {
+ "clk26m",
+ "vcodecpll_ck",
+ "tvdpll_445p5m",
+ "univpll_d3",
+ "vencpll_d2",
+ "syspll_d3",
+ "univpll1_d2",
+ "mmpll_d2",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const venc_parents[] __initconst = {
+ "clk26m",
+ "vcodecpll_ck",
+ "tvdpll_445p5m",
+ "univpll_d3",
+ "vencpll_d2",
+ "syspll_d3",
+ "univpll1_d2",
+ "univpll2_d2",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const mfg_parents[] __initconst = {
+ "clk26m",
+ "mmpll_ck",
+ "dmpll_ck",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "syspll_d3",
+ "syspll1_d2",
+ "syspll_d5",
+ "univpll_d3",
+ "univpll1_d2",
+ "univpll_d5",
+ "univpll2_d2"
+};
+
+static const char * const camtg_parents[] __initconst = {
+ "clk26m",
+ "univpll_d26",
+ "univpll2_d2",
+ "syspll3_d2",
+ "syspll3_d4",
+ "univpll1_d4"
+};
+
+static const char * const uart_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d8"
+};
+
+static const char * const spi_parents[] __initconst = {
+ "clk26m",
+ "syspll3_d2",
+ "syspll1_d4",
+ "syspll4_d2",
+ "univpll3_d2",
+ "univpll2_d4",
+ "univpll1_d8"
+};
+
+static const char * const usb20_parents[] __initconst = {
+ "clk26m",
+ "univpll1_d8",
+ "univpll3_d4"
+};
+
+static const char * const usb30_parents[] __initconst = {
+ "clk26m",
+ "univpll3_d2",
+ "usb_syspll_125m",
+ "univpll2_d4"
+};
+
+static const char * const msdc50_0_h_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d2",
+ "syspll2_d2",
+ "syspll4_d2",
+ "univpll_d5",
+ "univpll1_d4"
+};
+
+static const char * const msdc50_0_parents[] __initconst = {
+ "clk26m",
+ "msdcpll_ck",
+ "msdcpll_d2",
+ "univpll1_d4",
+ "syspll2_d2",
+ "syspll_d7",
+ "msdcpll_d4",
+ "vencpll_d4",
+ "tvdpll_ck",
+ "univpll_d2",
+ "univpll1_d2",
+ "mmpll_ck",
+ "msdcpll2_ck",
+ "msdcpll2_d2",
+ "msdcpll2_d4"
+};
+
+static const char * const msdc30_1_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d2",
+ "msdcpll_d4",
+ "univpll1_d4",
+ "syspll2_d2",
+ "syspll_d7",
+ "univpll_d7",
+ "vencpll_d4"
+};
+
+static const char * const msdc30_2_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d2",
+ "msdcpll_d4",
+ "univpll1_d4",
+ "syspll2_d2",
+ "syspll_d7",
+ "univpll_d7",
+ "vencpll_d2"
+};
+
+static const char * const msdc30_3_parents[] __initconst = {
+ "clk26m",
+ "msdcpll2_ck",
+ "msdcpll2_d2",
+ "univpll2_d2",
+ "msdcpll2_d4",
+ "msdcpll_d4",
+ "univpll1_d4",
+ "syspll2_d2",
+ "syspll_d7",
+ "univpll_d7",
+ "vencpll_d4",
+ "msdcpll_ck",
+ "msdcpll_d2",
+ "msdcpll_d4"
+};
+
+static const char * const audio_parents[] __initconst = {
+ "clk26m",
+ "syspll3_d4",
+ "syspll4_d4",
+ "syspll1_d16"
+};
+
+static const char * const aud_intbus_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d4",
+ "syspll4_d2",
+ "univpll3_d2",
+ "univpll2_d8",
+ "dmpll_d4",
+ "dmpll_d8"
+};
+
+static const char * const pmicspi_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d8",
+ "syspll3_d4",
+ "syspll1_d16",
+ "univpll3_d4",
+ "univpll_d26",
+ "dmpll_d8",
+ "dmpll_d16"
+};
+
+static const char * const scp_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d2",
+ "univpll_d5",
+ "syspll_d5",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const atb_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d2",
+ "univpll_d5",
+ "dmpll_d2"
+};
+
+static const char * const venc_lt_parents[] __initconst = {
+ "clk26m",
+ "univpll_d3",
+ "vcodecpll_ck",
+ "tvdpll_445p5m",
+ "vencpll_d2",
+ "syspll_d3",
+ "univpll1_d2",
+ "univpll2_d2",
+ "syspll1_d2",
+ "univpll_d5",
+ "vcodecpll_370p5",
+ "dmpll_ck"
+};
+
+static const char * const dpi0_parents[] __initconst = {
+ "clk26m",
+ "tvdpll_d2",
+ "tvdpll_d4",
+ "clk26m",
+ "clk26m",
+ "tvdpll_d8",
+ "tvdpll_d16"
+};
+
+static const char * const irda_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d4",
+ "syspll2_d4"
+};
+
+static const char * const cci400_parents[] __initconst = {
+ "clk26m",
+ "vencpll_ck",
+ "armca7pll_754m",
+ "armca7pll_502m",
+ "univpll_d2",
+ "syspll_d2",
+ "msdcpll_ck",
+ "dmpll_ck"
+};
+
+static const char * const aud_1_parents[] __initconst = {
+ "clk26m",
+ "apll1_ck",
+ "univpll2_d4",
+ "univpll2_d8"
+};
+
+static const char * const aud_2_parents[] __initconst = {
+ "clk26m",
+ "apll2_ck",
+ "univpll2_d4",
+ "univpll2_d8"
+};
+
+static const char * const mem_mfg_in_parents[] __initconst = {
+ "clk26m",
+ "mmpll_ck",
+ "dmpll_ck",
+ "clk26m"
+};
+
+static const char * const axi_mfg_in_parents[] __initconst = {
+ "clk26m",
+ "axi_sel",
+ "dmpll_d2"
+};
+
+static const char * const scam_parents[] __initconst = {
+ "clk26m",
+ "syspll3_d2",
+ "univpll2_d4",
+ "dmpll_d4"
+};
+
+static const char * const spinfi_ifr_parents[] __initconst = {
+ "clk26m",
+ "univpll2_d8",
+ "univpll3_d4",
+ "syspll4_d2",
+ "univpll2_d4",
+ "univpll3_d2",
+ "syspll1_d4",
+ "univpll1_d4"
+};
+
+static const char * const hdmi_parents[] __initconst = {
+ "clk26m",
+ "hdmitx_dig_cts",
+ "hdmitxpll_d2",
+ "hdmitxpll_d3"
+};
+
+static const char * const dpilvds_parents[] __initconst = {
+ "clk26m",
+ "lvdspll",
+ "lvdspll_d2",
+ "lvdspll_d4",
+ "lvdspll_d8",
+ "fpc_ck"
+};
+
+static const char * const msdc50_2_h_parents[] __initconst = {
+ "clk26m",
+ "syspll1_d2",
+ "syspll2_d2",
+ "syspll4_d2",
+ "univpll_d5",
+ "univpll1_d4"
+};
+
+static const char * const hdcp_parents[] __initconst = {
+ "clk26m",
+ "syspll4_d2",
+ "syspll3_d4",
+ "univpll2_d4"
+};
+
+static const char * const hdcp_24m_parents[] __initconst = {
+ "clk26m",
+ "univpll_d26",
+ "univpll_d52",
+ "univpll2_d8"
+};
+
+static const char * const rtc_parents[] __initconst = {
+ "clkrtc_int",
+ "clkrtc_ext",
+ "clk26m",
+ "univpll3_d8"
+};
+
+static const char * const i2s0_m_ck_parents[] __initconst = {
+ "apll1_div1",
+ "apll2_div1"
+};
+
+static const char * const i2s1_m_ck_parents[] __initconst = {
+ "apll1_div2",
+ "apll2_div2"
+};
+
+static const char * const i2s2_m_ck_parents[] __initconst = {
+ "apll1_div3",
+ "apll2_div3"
+};
+
+static const char * const i2s3_m_ck_parents[] __initconst = {
+ "apll1_div4",
+ "apll2_div4"
+};
+
+static const char * const i2s3_b_ck_parents[] __initconst = {
+ "apll1_div5",
+ "apll2_div5"
+};
+
+static const struct mtk_composite top_muxes[] __initconst = {
+ /* CLK_CFG_0 */
+ MUX(TOP_AXI_SEL, "axi_sel", axi_parents, 0x0040, 0, 3),
+ MUX(TOP_MEM_SEL, "mem_sel", mem_parents, 0x0040, 8, 1),
+ MUX_GATE(TOP_DDRPHYCFG_SEL, "ddrphycfg_sel", ddrphycfg_parents, 0x0040, 16, 1, 23),
+ MUX_GATE(TOP_MM_SEL, "mm_sel", mm_parents, 0x0040, 24, 4, 31),
+ /* CLK_CFG_1 */
+ MUX_GATE(TOP_PWM_SEL, "pwm_sel", pwm_parents, 0x0050, 0, 2, 7),
+ MUX_GATE(TOP_VDEC_SEL, "vdec_sel", vdec_parents, 0x0050, 8, 4, 15),
+ MUX_GATE(TOP_VENC_SEL, "venc_sel", venc_parents, 0x0050, 16, 4, 23),
+ MUX_GATE(TOP_MFG_SEL, "mfg_sel", mfg_parents, 0x0050, 24, 4, 31),
+ /* CLK_CFG_2 */
+ MUX_GATE(TOP_CAMTG_SEL, "camtg_sel", camtg_parents, 0x0060, 0, 3, 7),
+ MUX_GATE(TOP_UART_SEL, "uart_sel", uart_parents, 0x0060, 8, 1, 15),
+ MUX_GATE(TOP_SPI_SEL, "spi_sel", spi_parents, 0x0060, 16, 3, 23),
+ MUX_GATE(TOP_USB20_SEL, "usb20_sel", usb20_parents, 0x0060, 24, 2, 31),
+ /* CLK_CFG_3 */
+ MUX_GATE(TOP_USB30_SEL, "usb30_sel", usb30_parents, 0x0070, 0, 2, 7),
+ MUX_GATE(TOP_MSDC50_0_H_SEL, "msdc50_0_h_sel", msdc50_0_h_parents, 0x0070, 8, 3, 15),
+ MUX_GATE(TOP_MSDC50_0_SEL, "msdc50_0_sel", msdc50_0_parents, 0x0070, 16, 4, 23),
+ MUX_GATE(TOP_MSDC30_1_SEL, "msdc30_1_sel", msdc30_1_parents, 0x0070, 24, 3, 31),
+ /* CLK_CFG_4 */
+ MUX_GATE(TOP_MSDC30_2_SEL, "msdc30_2_sel", msdc30_2_parents, 0x0080, 0, 3, 7),
+ MUX_GATE(TOP_MSDC30_3_SEL, "msdc30_3_sel", msdc30_3_parents, 0x0080, 8, 4, 15),
+ MUX_GATE(TOP_AUDIO_SEL, "audio_sel", audio_parents, 0x0080, 16, 2, 23),
+ MUX_GATE(TOP_AUD_INTBUS_SEL, "aud_intbus_sel", aud_intbus_parents, 0x0080, 24, 3, 31),
+ /* CLK_CFG_5 */
+ MUX_GATE(TOP_PMICSPI_SEL, "pmicspi_sel", pmicspi_parents, 0x0090, 0, 3, 7 /* 7:5 */),
+ MUX_GATE(TOP_SCP_SEL, "scp_sel", scp_parents, 0x0090, 8, 3, 15),
+ MUX_GATE(TOP_ATB_SEL, "atb_sel", atb_parents, 0x0090, 16, 2, 23),
+ MUX_GATE(TOP_VENC_LT_SEL, "venclt_sel", venc_lt_parents, 0x0090, 24, 4, 31),
+ /* CLK_CFG_6 */
+ MUX_GATE(TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7),
+ MUX_GATE(TOP_IRDA_SEL, "irda_sel", irda_parents, 0x00a0, 8, 2, 15),
+ MUX_GATE(TOP_CCI400_SEL, "cci400_sel", cci400_parents, 0x00a0, 16, 3, 23),
+ MUX_GATE(TOP_AUD_1_SEL, "aud_1_sel", aud_1_parents, 0x00a0, 24, 2, 31),
+ /* CLK_CFG_7 */
+ MUX_GATE(TOP_AUD_2_SEL, "aud_2_sel", aud_2_parents, 0x00b0, 0, 2, 7),
+ MUX_GATE(TOP_MEM_MFG_IN_SEL, "mem_mfg_in_sel", mem_mfg_in_parents, 0x00b0, 8, 2, 15),
+ MUX_GATE(TOP_AXI_MFG_IN_SEL, "axi_mfg_in_sel", axi_mfg_in_parents, 0x00b0, 16, 2, 23),
+ MUX_GATE(TOP_SCAM_SEL, "scam_sel", scam_parents, 0x00b0, 24, 2, 31),
+ /* CLK_CFG_12 */
+ MUX_GATE(TOP_SPINFI_IFR_SEL, "spinfi_ifr_sel", spinfi_ifr_parents, 0x00c0, 0, 3, 7),
+ MUX_GATE(TOP_HDMI_SEL, "hdmi_sel", hdmi_parents, 0x00c0, 8, 2, 15),
+ MUX_GATE(TOP_DPILVDS_SEL, "dpilvds_sel", dpilvds_parents, 0x00c0, 24, 3, 31),
+ /* CLK_CFG_13 */
+ MUX_GATE(TOP_MSDC50_2_H_SEL, "msdc50_2_h_sel", msdc50_2_h_parents, 0x00d0, 0, 3, 7),
+ MUX_GATE(TOP_HDCP_SEL, "hdcp_sel", hdcp_parents, 0x00d0, 8, 2, 15),
+ MUX_GATE(TOP_HDCP_24M_SEL, "hdcp_24m_sel", hdcp_24m_parents, 0x00d0, 16, 2, 23),
+ MUX(TOP_RTC_SEL, "rtc_sel", rtc_parents, 0x00d0, 24, 2),
+
+ DIV_GATE(TOP_APLL1_DIV0, "apll1_div0", "aud_1_sel", 0x12c, 8, 0x120, 4, 24),
+ DIV_GATE(TOP_APLL1_DIV1, "apll1_div1", "aud_1_sel", 0x12c, 9, 0x124, 8, 0),
+ DIV_GATE(TOP_APLL1_DIV2, "apll1_div2", "aud_1_sel", 0x12c, 10, 0x124, 8, 8),
+ DIV_GATE(TOP_APLL1_DIV3, "apll1_div3", "aud_1_sel", 0x12c, 11, 0x124, 8, 16),
+ DIV_GATE(TOP_APLL1_DIV4, "apll1_div4", "aud_1_sel", 0x12c, 12, 0x124, 8, 24),
+ DIV_GATE(TOP_APLL1_DIV5, "apll1_div5", "aud_1_sel", 0x12c, 13, 0x12c, 4, 0),
+
+ DIV_GATE(TOP_APLL2_DIV0, "apll2_div0", "aud_2_sel", 0x12c, 16, 0x120, 4, 28),
+ DIV_GATE(TOP_APLL2_DIV1, "apll2_div1", "aud_2_sel", 0x12c, 17, 0x128, 8, 0),
+ DIV_GATE(TOP_APLL2_DIV2, "apll2_div2", "aud_2_sel", 0x12c, 18, 0x128, 8, 8),
+ DIV_GATE(TOP_APLL2_DIV3, "apll2_div3", "aud_2_sel", 0x12c, 19, 0x128, 8, 16),
+ DIV_GATE(TOP_APLL2_DIV4, "apll2_div4", "aud_2_sel", 0x12c, 20, 0x128, 8, 24),
+ DIV_GATE(TOP_APLL2_DIV5, "apll2_div5", "aud_2_sel", 0x12c, 21, 0x12c, 4, 4),
+
+ MUX(TOP_I2S0_M_CK_SEL, "i2s0_m_ck_sel", i2s0_m_ck_parents, 0x120, 4, 1),
+ MUX(TOP_I2S1_M_CK_SEL, "i2s1_m_ck_sel", i2s1_m_ck_parents, 0x120, 5, 1),
+ MUX(TOP_I2S2_M_CK_SEL, "i2s2_m_ck_sel", i2s2_m_ck_parents, 0x120, 6, 1),
+ MUX(TOP_I2S3_M_CK_SEL, "i2s3_m_ck_sel", i2s3_m_ck_parents, 0x120, 7, 1),
+ MUX(TOP_I2S3_B_CK_SEL, "i2s3_b_ck_sel", i2s3_b_ck_parents, 0x120, 8, 1),
+};
+
+static void __init mtk_init_clk_topckgen(void __iomem *top_base,
+ struct clk_onecell_data *clk_data)
+{
+ int i;
+ struct clk *clk;
+
+ for (i = 0; i < ARRAY_SIZE(top_muxes); i++) {
+ const struct mtk_composite *mux = &top_muxes[i];
+
+ clk = mtk_clk_register_composite(mux, top_base, &lock);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ mux->name, PTR_ERR(clk));
+ continue;
+ }
+
+ if (clk_data)
+ clk_data->clks[mux->id] = clk;
+ }
+}
+
+static const struct mtk_gate_regs infra_cg_regs = {
+ .set_ofs = 0x0040,
+ .clr_ofs = 0x0044,
+ .sta_ofs = 0x0048,
+};
+
+#define GATE_ICG(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &infra_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate infra_clks[] __initconst = {
+ GATE_ICG(INFRA_DBGCLK, "infra_dbgclk", "axi_sel", 0),
+ GATE_ICG(INFRA_SMI, "infra_smi", "mm_sel", 1),
+ GATE_ICG(INFRA_AUDIO, "infra_audio", "aud_intbus_sel", 5),
+ GATE_ICG(INFRA_GCE, "infra_gce", "axi_sel", 6),
+ GATE_ICG(INFRA_L2C_SRAM, "infra_l2c_sram", "axi_sel", 7),
+ GATE_ICG(INFRA_M4U, "infra_m4u", "mem_sel", 8),
+ GATE_ICG(INFRA_CPUM, "infra_cpum", "clk_null", 15),
+ GATE_ICG(INFRA_KP, "infra_kp", "axi_sel", 16),
+ GATE_ICG(INFRA_CEC, "infra_cec", "clk26m", 18),
+ GATE_ICG(INFRA_PMICSPI, "infra_pmicspi", "pmicspi_sel", 22),
+ GATE_ICG(INFRA_PMICWRAP, "infra_pmicwrap", "axi_sel", 23),
+};
+
+static const struct mtk_gate_regs peri0_cg_regs = {
+ .set_ofs = 0x0008,
+ .clr_ofs = 0x0010,
+ .sta_ofs = 0x0018,
+};
+
+static const struct mtk_gate_regs peri1_cg_regs = {
+ .set_ofs = 0x000c,
+ .clr_ofs = 0x0014,
+ .sta_ofs = 0x001c,
+};
+
+#define GATE_PERI0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &peri0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+#define GATE_PERI1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &peri1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate peri_clks[] __initconst = {
+ /* PERI0 */
+ GATE_PERI0(PERI_NFI, "peri_nfi", "axi_sel", 0),
+ GATE_PERI0(PERI_THERM, "peri_therm", "axi_sel", 1),
+ GATE_PERI0(PERI_PWM1, "peri_pwm1", "axi_sel", 2),
+ GATE_PERI0(PERI_PWM2, "peri_pwm2", "axi_sel", 3),
+ GATE_PERI0(PERI_PWM3, "peri_pwm3", "axi_sel", 4),
+ GATE_PERI0(PERI_PWM4, "peri_pwm4", "axi_sel", 5),
+ GATE_PERI0(PERI_PWM5, "peri_pwm5", "axi_sel", 6),
+ GATE_PERI0(PERI_PWM6, "peri_pwm6", "axi_sel", 7),
+ GATE_PERI0(PERI_PWM7, "peri_pwm7", "axi_sel", 8),
+ GATE_PERI0(PERI_PWM, "peri_pwm", "axi_sel", 9),
+ GATE_PERI0(PERI_USB0, "peri_usb0", "usb20_sel", 10),
+ GATE_PERI0(PERI_USB1, "peri_usb1", "usb20_sel", 11),
+ GATE_PERI0(PERI_AP_DMA, "peri_ap_dma", "axi_sel", 12),
+ GATE_PERI0(PERI_MSDC30_0, "peri_msdc30_0", "msdc50_0_sel", 13),
+ GATE_PERI0(PERI_MSDC30_1, "peri_msdc30_1", "msdc30_1_sel", 14),
+ GATE_PERI0(PERI_MSDC30_2, "peri_msdc30_2", "msdc30_2_sel", 15),
+ GATE_PERI0(PERI_MSDC30_3, "peri_msdc30_3", "msdc30_3_sel", 16),
+ GATE_PERI0(PERI_NLI_ARB, "peri_nli_arb", "axi_sel", 17),
+ GATE_PERI0(PERI_IRDA, "peri_irda", "irda_sel", 18),
+ GATE_PERI0(PERI_UART0, "peri_uart0", "uart_sel", 19),
+ GATE_PERI0(PERI_UART1, "peri_uart1", "uart_sel", 20),
+ GATE_PERI0(PERI_UART2, "peri_uart2", "uart_sel", 21),
+ GATE_PERI0(PERI_UART3, "peri_uart3", "uart_sel", 22),
+ GATE_PERI0(PERI_I2C0, "peri_i2c0", "axi_sel", 23),
+ GATE_PERI0(PERI_I2C1, "peri_i2c1", "axi_sel", 24),
+ GATE_PERI0(PERI_I2C2, "peri_i2c2", "axi_sel", 25),
+ GATE_PERI0(PERI_I2C3, "peri_i2c3", "axi_sel", 26),
+ GATE_PERI0(PERI_I2C4, "peri_i2c4", "axi_sel", 27),
+ GATE_PERI0(PERI_AUXADC, "peri_auxadc", "clk26m", 28),
+ GATE_PERI0(PERI_SPI0, "peri_spi0", "spi_sel", 29),
+ GATE_PERI0(PERI_I2C5, "peri_i2c5", "axi_sel", 30),
+ GATE_PERI0(PERI_NFIECC, "peri_nfiecc", "axi_sel", 31),
+ /* PERI1 */
+ GATE_PERI1(PERI_SPI, "peri_spi", "spi_sel", 0),
+ GATE_PERI1(PERI_IRRX, "peri_irrx", "spi_sel", 1),
+ GATE_PERI1(PERI_I2C6, "peri_i2c6", "axi_sel", 2),
+};
+
+static void __init mtk_topckgen_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ void __iomem *base;
+ int r;
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("%s(): ioremap failed\n", __func__);
+ return;
+ }
+
+ clk_data = mtk_alloc_clk_data(TOP_NR_CLK);
+
+ mtk_clk_register_factors(root_clk_alias, ARRAY_SIZE(root_clk_alias), clk_data);
+ mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
+ mtk_init_clk_topckgen(base, clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+}
+CLK_OF_DECLARE(mtk_topckgen, "mediatek,mt8173-topckgen", mtk_topckgen_init);
+
+static void __init mtk_infrasys_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(INFRA_NR_CLK);
+
+ mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ mtk_register_reset_controller(node, 2, 0x30);
+}
+CLK_OF_DECLARE(mtk_infrasys, "mediatek,mt8173-infracfg", mtk_infrasys_init);
+
+static void __init mtk_pericfg_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(PERI_NR_CLK);
+
+ mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ mtk_register_reset_controller(node, 2, 0);
+}
+CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt8173-pericfg", mtk_pericfg_init);
+
+#define MT8173_PLL_FMAX (3000UL * MHZ)
+
+#define CON0_MT8173_RST_BAR BIT(24)
+
+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, _pd_shift, \
+ _tuner_reg, _pcw_reg, _pcw_shift) { \
+ .id = _id, \
+ .name = _name, \
+ .reg = _reg, \
+ .pwr_reg = _pwr_reg, \
+ .en_mask = _en_mask, \
+ .flags = _flags, \
+ .rst_bar_mask = CON0_MT8173_RST_BAR, \
+ .fmax = MT8173_PLL_FMAX, \
+ .pcwbits = _pcwbits, \
+ .pd_reg = _pd_reg, \
+ .pd_shift = _pd_shift, \
+ .tuner_reg = _tuner_reg, \
+ .pcw_reg = _pcw_reg, \
+ .pcw_shift = _pcw_shift, \
+ }
+
+static const struct mtk_pll_data plls[] = {
+ PLL(APMIXED_ARMCA15PLL, "armca15pll", 0x200, 0x20c, 0x00000001, 0, 21, 0x204, 24, 0x0, 0x204, 0),
+ PLL(APMIXED_ARMCA7PLL, "armca7pll", 0x210, 0x21c, 0x00000001, 0, 21, 0x214, 24, 0x0, 0x214, 0),
+ PLL(APMIXED_MAINPLL, "mainpll", 0x220, 0x22c, 0xf0000101, HAVE_RST_BAR, 21, 0x220, 4, 0x0, 0x224, 0),
+ PLL(APMIXED_UNIVPLL, "univpll", 0x230, 0x23c, 0xfe000001, HAVE_RST_BAR, 7, 0x230, 4, 0x0, 0x234, 14),
+ PLL(APMIXED_MMPLL, "mmpll", 0x240, 0x24c, 0x00000001, 0, 21, 0x244, 24, 0x0, 0x244, 0),
+ PLL(APMIXED_MSDCPLL, "msdcpll", 0x250, 0x25c, 0x00000001, 0, 21, 0x250, 4, 0x0, 0x254, 0),
+ PLL(APMIXED_VENCPLL, "vencpll", 0x260, 0x26c, 0x00000001, 0, 21, 0x260, 4, 0x0, 0x264, 0),
+ PLL(APMIXED_TVDPLL, "tvdpll", 0x270, 0x27c, 0x00000001, 0, 21, 0x270, 4, 0x0, 0x274, 0),
+ PLL(APMIXED_MPLL, "mpll", 0x280, 0x28c, 0x00000001, 0, 21, 0x280, 4, 0x0, 0x284, 0),
+ PLL(APMIXED_VCODECPLL, "vcodecpll", 0x290, 0x29c, 0x00000001, 0, 21, 0x290, 4, 0x0, 0x294, 0),
+ PLL(APMIXED_APLL1, "apll1", 0x2a0, 0x2b0, 0x00000001, 0, 31, 0x2a0, 4, 0x2a4, 0x2a4, 0),
+ PLL(APMIXED_APLL2, "apll2", 0x2b4, 0x2c4, 0x00000001, 0, 31, 0x2b4, 4, 0x2b8, 0x2b8, 0),
+ PLL(APMIXED_LVDSPLL, "lvdspll", 0x2d0, 0x2dc, 0x00000001, 0, 21, 0x2d0, 4, 0x0, 0x2d4, 0),
+ PLL(APMIXED_MSDCPLL2, "msdcpll2", 0x2f0, 0x2fc, 0x00000001, 0, 21, 0x2f0, 4, 0x0, 0x2f4, 0),
+};
+
+static void __init mtk_apmixedsys_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+
+ clk_data = mtk_alloc_clk_data(ARRAY_SIZE(plls));
+ if (!clk_data)
+ return;
+
+ mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
+}
+CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt8173-apmixedsys",
+ mtk_apmixedsys_init);
diff --git a/include/dt-bindings/clock/mt8173-clk.h b/include/dt-bindings/clock/mt8173-clk.h
new file mode 100644
index 0000000..e648b28
--- /dev/null
+++ b/include/dt-bindings/clock/mt8173-clk.h
@@ -0,0 +1,231 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_MT8173_H
+#define _DT_BINDINGS_CLK_MT8173_H
+
+/* TOPCKGEN */
+
+#define TOP_CLKPH_MCK_O 1
+#define TOP_DPI_CK 2
+#define TOP_USB_SYSPLL_125M 3
+#define TOP_HDMITX_DIG_CTS 4
+#define TOP_ARMCA7PLL_754M 5
+#define TOP_ARMCA7PLL_502M 6
+#define TOP_MAIN_H546M 7
+#define TOP_MAIN_H364M 8
+#define TOP_MAIN_H218P4M 9
+#define TOP_MAIN_H156M 10
+#define TOP_TVDPLL_445P5M 11
+#define TOP_TVDPLL_594M 12
+#define TOP_UNIV_624M 13
+#define TOP_UNIV_416M 14
+#define TOP_UNIV_249P6M 15
+#define TOP_UNIV_178P3M 16
+#define TOP_UNIV_48M 17
+#define TOP_CLKRTC_EXT 18
+#define TOP_CLKRTC_INT 19
+#define TOP_FPC_CK 20
+#define TOP_HDMITXPLL_D2 21
+#define TOP_HDMITXPLL_D3 22
+#define TOP_ARMCA7PLL_D2 23
+#define TOP_ARMCA7PLL_D3 24
+#define TOP_APLL1_CK 25
+#define TOP_APLL2_CK 26
+#define TOP_DMPLL_CK 27
+#define TOP_DMPLL_D2 28
+#define TOP_DMPLL_D4 29
+#define TOP_DMPLL_D8 30
+#define TOP_DMPLL_D16 31
+#define TOP_LVDSPLL_D2 32
+#define TOP_LVDSPLL_D4 33
+#define TOP_LVDSPLL_D8 34
+#define TOP_MMPLL_CK 35
+#define TOP_MMPLL_D2 36
+#define TOP_MSDCPLL_CK 37
+#define TOP_MSDCPLL_D2 38
+#define TOP_MSDCPLL_D4 39
+#define TOP_MSDCPLL2_CK 40
+#define TOP_MSDCPLL2_D2 41
+#define TOP_MSDCPLL2_D4 42
+#define TOP_SYSPLL_D2 43
+#define TOP_SYSPLL1_D2 44
+#define TOP_SYSPLL1_D4 45
+#define TOP_SYSPLL1_D8 46
+#define TOP_SYSPLL1_D16 47
+#define TOP_SYSPLL_D3 48
+#define TOP_SYSPLL2_D2 49
+#define TOP_SYSPLL2_D4 50
+#define TOP_SYSPLL_D5 51
+#define TOP_SYSPLL3_D2 52
+#define TOP_SYSPLL3_D4 53
+#define TOP_SYSPLL_D7 54
+#define TOP_SYSPLL4_D2 55
+#define TOP_SYSPLL4_D4 56
+#define TOP_TVDPLL_CK 57
+#define TOP_TVDPLL_D2 58
+#define TOP_TVDPLL_D4 59
+#define TOP_TVDPLL_D8 60
+#define TOP_TVDPLL_D16 61
+#define TOP_UNIVPLL_D2 62
+#define TOP_UNIVPLL1_D2 63
+#define TOP_UNIVPLL1_D4 64
+#define TOP_UNIVPLL1_D8 65
+#define TOP_UNIVPLL_D3 66
+#define TOP_UNIVPLL2_D2 67
+#define TOP_UNIVPLL2_D4 68
+#define TOP_UNIVPLL2_D8 69
+#define TOP_UNIVPLL_D5 70
+#define TOP_UNIVPLL3_D2 71
+#define TOP_UNIVPLL3_D4 72
+#define TOP_UNIVPLL3_D8 73
+#define TOP_UNIVPLL_D7 74
+#define TOP_UNIVPLL_D26 75
+#define TOP_UNIVPLL_D52 76
+#define TOP_VCODECPLL_CK 77
+#define TOP_VCODECPLL_370P5 78
+#define TOP_VENCPLL_CK 79
+#define TOP_VENCPLL_D2 80
+#define TOP_VENCPLL_D4 81
+#define TOP_AXI_SEL 82
+#define TOP_MEM_SEL 83
+#define TOP_DDRPHYCFG_SEL 84
+#define TOP_MM_SEL 85
+#define TOP_PWM_SEL 86
+#define TOP_VDEC_SEL 87
+#define TOP_VENC_SEL 88
+#define TOP_MFG_SEL 89
+#define TOP_CAMTG_SEL 90
+#define TOP_UART_SEL 91
+#define TOP_SPI_SEL 92
+#define TOP_USB20_SEL 93
+#define TOP_USB30_SEL 94
+#define TOP_MSDC50_0_H_SEL 95
+#define TOP_MSDC50_0_SEL 96
+#define TOP_MSDC30_1_SEL 97
+#define TOP_MSDC30_2_SEL 98
+#define TOP_MSDC30_3_SEL 99
+#define TOP_AUDIO_SEL 100
+#define TOP_AUD_INTBUS_SEL 101
+#define TOP_PMICSPI_SEL 102
+#define TOP_SCP_SEL 103
+#define TOP_ATB_SEL 104
+#define TOP_VENC_LT_SEL 105
+#define TOP_DPI0_SEL 106
+#define TOP_IRDA_SEL 107
+#define TOP_CCI400_SEL 108
+#define TOP_AUD_1_SEL 109
+#define TOP_AUD_2_SEL 110
+#define TOP_MEM_MFG_IN_SEL 111
+#define TOP_AXI_MFG_IN_SEL 112
+#define TOP_SCAM_SEL 113
+#define TOP_SPINFI_IFR_SEL 114
+#define TOP_HDMI_SEL 115
+#define TOP_DPILVDS_SEL 116
+#define TOP_MSDC50_2_H_SEL 117
+#define TOP_HDCP_SEL 118
+#define TOP_HDCP_24M_SEL 119
+#define TOP_RTC_SEL 120
+#define TOP_APLL1_DIV0 121
+#define TOP_APLL1_DIV1 122
+#define TOP_APLL1_DIV2 123
+#define TOP_APLL1_DIV3 124
+#define TOP_APLL1_DIV4 125
+#define TOP_APLL1_DIV5 126
+#define TOP_APLL2_DIV0 127
+#define TOP_APLL2_DIV1 128
+#define TOP_APLL2_DIV2 129
+#define TOP_APLL2_DIV3 130
+#define TOP_APLL2_DIV4 131
+#define TOP_APLL2_DIV5 132
+#define TOP_I2S0_M_CK_SEL 133
+#define TOP_I2S1_M_CK_SEL 134
+#define TOP_I2S2_M_CK_SEL 135
+#define TOP_I2S3_M_CK_SEL 136
+#define TOP_I2S3_B_CK_SEL 137
+#define TOP_NR_CLK 138
+
+/* APMIXED_SYS */
+
+#define APMIXED_ARMCA15PLL 1
+#define APMIXED_ARMCA7PLL 2
+#define APMIXED_MAINPLL 3
+#define APMIXED_UNIVPLL 4
+#define APMIXED_MMPLL 5
+#define APMIXED_MSDCPLL 6
+#define APMIXED_VENCPLL 7
+#define APMIXED_TVDPLL 8
+#define APMIXED_MPLL 9
+#define APMIXED_VCODECPLL 10
+#define APMIXED_APLL1 11
+#define APMIXED_APLL2 12
+#define APMIXED_LVDSPLL 13
+#define APMIXED_MSDCPLL2 14
+#define APMIXED_NR_CLK 15
+
+/* INFRA_SYS */
+
+#define INFRA_DBGCLK 1
+#define INFRA_SMI 2
+#define INFRA_AUDIO 3
+#define INFRA_GCE 4
+#define INFRA_L2C_SRAM 5
+#define INFRA_M4U 6
+#define INFRA_CPUM 7
+#define INFRA_KP 8
+#define INFRA_CEC 9
+#define INFRA_PMICSPI 10
+#define INFRA_PMICWRAP 11
+#define INFRA_NR_CLK 12
+
+/* PERI_SYS */
+
+#define PERI_NFI 1
+#define PERI_THERM 2
+#define PERI_PWM1 3
+#define PERI_PWM2 4
+#define PERI_PWM3 5
+#define PERI_PWM4 6
+#define PERI_PWM5 7
+#define PERI_PWM6 8
+#define PERI_PWM7 9
+#define PERI_PWM 10
+#define PERI_USB0 11
+#define PERI_USB1 12
+#define PERI_AP_DMA 13
+#define PERI_MSDC30_0 14
+#define PERI_MSDC30_1 15
+#define PERI_MSDC30_2 16
+#define PERI_MSDC30_3 17
+#define PERI_NLI_ARB 18
+#define PERI_IRDA 19
+#define PERI_UART0 20
+#define PERI_UART1 21
+#define PERI_UART2 22
+#define PERI_UART3 23
+#define PERI_I2C0 24
+#define PERI_I2C1 25
+#define PERI_I2C2 26
+#define PERI_I2C3 27
+#define PERI_I2C4 28
+#define PERI_AUXADC 29
+#define PERI_SPI0 30
+#define PERI_I2C5 31
+#define PERI_NFIECC 32
+#define PERI_SPI 33
+#define PERI_IRRX 34
+#define PERI_I2C6 35
+#define PERI_NR_CLK 36
+
+#endif /* _DT_BINDINGS_CLK_MT8173_H */
diff --git a/include/dt-bindings/reset-controller/mt8173-resets.h b/include/dt-bindings/reset-controller/mt8173-resets.h
new file mode 100644
index 0000000..9464b37
--- /dev/null
+++ b/include/dt-bindings/reset-controller/mt8173-resets.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora Fu, MediaTek
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8173
+#define _DT_BINDINGS_RESET_CONTROLLER_MT8173
+
+/* INFRACFG resets */
+#define MT8173_INFRA_EMI_REG_RST 0
+#define MT8173_INFRA_DRAMC0_A0_RST 1
+#define MT8173_INFRA_APCIRQ_EINT_RST 3
+#define MT8173_INFRA_APXGPT_RST 4
+#define MT8173_INFRA_SCPSYS_RST 5
+#define MT8173_INFRA_KP_RST 6
+#define MT8173_INFRA_PMIC_WRAP_RST 7
+#define MT8173_INFRA_MPIP_RST 8
+#define MT8173_INFRA_CEC_RST 9
+#define MT8173_INFRA_EMI_RST 32
+#define MT8173_INFRA_DRAMC0_RST 34
+#define MT8173_INFRA_APMIXEDSYS_RST 35
+#define MT8173_INFRA_MIPI_DSI_RST 36
+#define MT8173_INFRA_TRNG_RST 37
+#define MT8173_INFRA_SYSIRQ_RST 38
+#define MT8173_INFRA_MIPI_CSI_RST 39
+#define MT8173_INFRA_GCE_FAXI_RST 40
+#define MT8173_INFRA_MMIOMMURST 47
+
+
+/* PERICFG resets */
+#define MT8173_PERI_UART0_SW_RST 0
+#define MT8173_PERI_UART1_SW_RST 1
+#define MT8173_PERI_UART2_SW_RST 2
+#define MT8173_PERI_UART3_SW_RST 3
+#define MT8173_PERI_IRRX_SW_RST 4
+#define MT8173_PERI_PWM_SW_RST 8
+#define MT8173_PERI_AUXADC_SW_RST 10
+#define MT8173_PERI_DMA_SW_RST 11
+#define MT8173_PERI_I2C6_SW_RST 13
+#define MT8173_PERI_NFI_SW_RST 14
+#define MT8173_PERI_THERM_SW_RST 16
+#define MT8173_PERI_MSDC2_SW_RST 17
+#define MT8173_PERI_MSDC3_SW_RST 18
+#define MT8173_PERI_MSDC0_SW_RST 19
+#define MT8173_PERI_MSDC1_SW_RST 20
+#define MT8173_PERI_I2C0_SW_RST 22
+#define MT8173_PERI_I2C1_SW_RST 23
+#define MT8173_PERI_I2C2_SW_RST 24
+#define MT8173_PERI_I2C3_SW_RST 25
+#define MT8173_PERI_I2C4_SW_RST 26
+#define MT8173_PERI_HDMI_SW_RST 29
+#define MT8173_PERI_SPI0_SW_RST 33
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8173 */
--
2.1.4
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [PATCH 6/6] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock/reset controllers
2015-03-19 8:42 ` Sascha Hauer
@ 2015-03-19 8:42 ` Sascha Hauer
-1 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: Mike Turquette
Cc: Stephen Boyd, YH Chen, linux-kernel, Henry Chen, linux-mediatek,
kernel, Matthias Brugger, Yingjoe Chen, Eddie Huang,
linux-arm-kernel, Sascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
.../bindings/arm/mediatek/mediatek,apmixedsys.txt | 23 +++++++++++++++++
.../bindings/arm/mediatek/mediatek,infracfg.txt | 30 ++++++++++++++++++++++
.../bindings/arm/mediatek/mediatek,pericfg.txt | 30 ++++++++++++++++++++++
.../bindings/arm/mediatek/mediatek,topckgen.txt | 23 +++++++++++++++++
4 files changed, 106 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
new file mode 100644
index 0000000..5af6d73
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
@@ -0,0 +1,23 @@
+Mediatek apmixedsys controller
+==============================
+
+The Mediatek apmixedsys controller provides the PLLs to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8135-apmixedsys"
+ - "mediatek,mt8173-apmixedsys"
+- #clock-cells: Must be 1
+
+The apmixedsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+apmixedsys: apmixedsys@10209000 {
+ compatible = "mediatek,mt8173-apmixedsys";
+ reg = <0 0x10209000 0 0x1000>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
new file mode 100644
index 0000000..684da473
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
@@ -0,0 +1,30 @@
+Mediatek infracfg controller
+============================
+
+The Mediatek infracfg controller provides various clocks and reset
+outputs to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8135-infracfg", "syscon"
+ - "mediatek,mt8173-infracfg", "syscon"
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The infracfg controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+Also it uses the common reset controller binding from
+Documentation/devicetree/bindings/reset/reset.txt.
+The available reset outputs are defined in
+dt-bindings/reset-controller/mt*-resets.h
+
+Example:
+
+infracfg: infracfg@10001000 {
+ compatible = "mediatek,mt8173-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
new file mode 100644
index 0000000..fdb45c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
@@ -0,0 +1,30 @@
+Mediatek pericfg controller
+===========================
+
+The Mediatek pericfg controller provides various clocks and reset
+outputs to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8135-pericfg", "syscon"
+ - "mediatek,mt8173-pericfg", "syscon"
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The pericfg controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+Also it uses the common reset controller binding from
+Documentation/devicetree/bindings/reset/reset.txt.
+The available reset outputs are defined in
+dt-bindings/reset-controller/mt*-resets.h
+
+Example:
+
+pericfg: pericfg@10003000 {
+ compatible = "mediatek,mt8173-pericfg", "syscon";
+ reg = <0 0x10003000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
new file mode 100644
index 0000000..a425248
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
@@ -0,0 +1,23 @@
+Mediatek topckgen controller
+============================
+
+The Mediatek topckgen controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8135-topckgen"
+ - "mediatek,mt8173-topckgen"
+- #clock-cells: Must be 1
+
+The topckgen controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+topckgen: topckgen@10000000 {
+ compatible = "mediatek,mt8173-topckgen";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+};
--
2.1.4
^ permalink raw reply related [flat|nested] 53+ messages in thread* [PATCH 6/6] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock/reset controllers
@ 2015-03-19 8:42 ` Sascha Hauer
0 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-19 8:42 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
.../bindings/arm/mediatek/mediatek,apmixedsys.txt | 23 +++++++++++++++++
.../bindings/arm/mediatek/mediatek,infracfg.txt | 30 ++++++++++++++++++++++
.../bindings/arm/mediatek/mediatek,pericfg.txt | 30 ++++++++++++++++++++++
.../bindings/arm/mediatek/mediatek,topckgen.txt | 23 +++++++++++++++++
4 files changed, 106 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
new file mode 100644
index 0000000..5af6d73
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
@@ -0,0 +1,23 @@
+Mediatek apmixedsys controller
+==============================
+
+The Mediatek apmixedsys controller provides the PLLs to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8135-apmixedsys"
+ - "mediatek,mt8173-apmixedsys"
+- #clock-cells: Must be 1
+
+The apmixedsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+apmixedsys: apmixedsys at 10209000 {
+ compatible = "mediatek,mt8173-apmixedsys";
+ reg = <0 0x10209000 0 0x1000>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
new file mode 100644
index 0000000..684da473
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
@@ -0,0 +1,30 @@
+Mediatek infracfg controller
+============================
+
+The Mediatek infracfg controller provides various clocks and reset
+outputs to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8135-infracfg", "syscon"
+ - "mediatek,mt8173-infracfg", "syscon"
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The infracfg controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+Also it uses the common reset controller binding from
+Documentation/devicetree/bindings/reset/reset.txt.
+The available reset outputs are defined in
+dt-bindings/reset-controller/mt*-resets.h
+
+Example:
+
+infracfg: infracfg at 10001000 {
+ compatible = "mediatek,mt8173-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
new file mode 100644
index 0000000..fdb45c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
@@ -0,0 +1,30 @@
+Mediatek pericfg controller
+===========================
+
+The Mediatek pericfg controller provides various clocks and reset
+outputs to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8135-pericfg", "syscon"
+ - "mediatek,mt8173-pericfg", "syscon"
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The pericfg controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+Also it uses the common reset controller binding from
+Documentation/devicetree/bindings/reset/reset.txt.
+The available reset outputs are defined in
+dt-bindings/reset-controller/mt*-resets.h
+
+Example:
+
+pericfg: pericfg at 10003000 {
+ compatible = "mediatek,mt8173-pericfg", "syscon";
+ reg = <0 0x10003000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
new file mode 100644
index 0000000..a425248
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
@@ -0,0 +1,23 @@
+Mediatek topckgen controller
+============================
+
+The Mediatek topckgen controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8135-topckgen"
+ - "mediatek,mt8173-topckgen"
+- #clock-cells: Must be 1
+
+The topckgen controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+topckgen: topckgen at 10000000 {
+ compatible = "mediatek,mt8173-topckgen";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+};
--
2.1.4
^ permalink raw reply related [flat|nested] 53+ messages in thread* Re: [PATCH 6/6] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock/reset controllers
2015-03-19 8:42 ` Sascha Hauer
@ 2015-03-27 13:32 ` Matthias Brugger
-1 siblings, 0 replies; 53+ messages in thread
From: Matthias Brugger @ 2015-03-27 13:32 UTC (permalink / raw)
To: Sascha Hauer, Mike Turquette
Cc: Stephen Boyd, YH Chen, linux-kernel, Henry Chen, linux-mediatek,
kernel, Yingjoe Chen, Eddie Huang, linux-arm-kernel
On 19/03/15 09:42, Sascha Hauer wrote:
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The patch should have a text as description.
Thanks,
Matthias
> ---
> .../bindings/arm/mediatek/mediatek,apmixedsys.txt | 23 +++++++++++++++++
> .../bindings/arm/mediatek/mediatek,infracfg.txt | 30 ++++++++++++++++++++++
> .../bindings/arm/mediatek/mediatek,pericfg.txt | 30 ++++++++++++++++++++++
> .../bindings/arm/mediatek/mediatek,topckgen.txt | 23 +++++++++++++++++
> 4 files changed, 106 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
> new file mode 100644
> index 0000000..5af6d73
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
> @@ -0,0 +1,23 @@
> +Mediatek apmixedsys controller
> +==============================
> +
> +The Mediatek apmixedsys controller provides the PLLs to the system.
> +
> +Required Properties:
> +
> +- compatible: Should be:
> + - "mediatek,mt8135-apmixedsys"
> + - "mediatek,mt8173-apmixedsys"
> +- #clock-cells: Must be 1
> +
> +The apmixedsys controller uses the common clk binding from
> +Documentation/devicetree/bindings/clock/clock-bindings.txt
> +The available clocks are defined in dt-bindings/clock/mt*-clk.h.
> +
> +Example:
> +
> +apmixedsys: apmixedsys@10209000 {
> + compatible = "mediatek,mt8173-apmixedsys";
> + reg = <0 0x10209000 0 0x1000>;
> + #clock-cells = <1>;
> +};
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
> new file mode 100644
> index 0000000..684da473
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
> @@ -0,0 +1,30 @@
> +Mediatek infracfg controller
> +============================
> +
> +The Mediatek infracfg controller provides various clocks and reset
> +outputs to the system.
> +
> +Required Properties:
> +
> +- compatible: Should be:
> + - "mediatek,mt8135-infracfg", "syscon"
> + - "mediatek,mt8173-infracfg", "syscon"
> +- #clock-cells: Must be 1
> +- #reset-cells: Must be 1
> +
> +The infracfg controller uses the common clk binding from
> +Documentation/devicetree/bindings/clock/clock-bindings.txt
> +The available clocks are defined in dt-bindings/clock/mt*-clk.h.
> +Also it uses the common reset controller binding from
> +Documentation/devicetree/bindings/reset/reset.txt.
> +The available reset outputs are defined in
> +dt-bindings/reset-controller/mt*-resets.h
> +
> +Example:
> +
> +infracfg: infracfg@10001000 {
> + compatible = "mediatek,mt8173-infracfg", "syscon";
> + reg = <0 0x10001000 0 0x1000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> +};
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
> new file mode 100644
> index 0000000..fdb45c6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
> @@ -0,0 +1,30 @@
> +Mediatek pericfg controller
> +===========================
> +
> +The Mediatek pericfg controller provides various clocks and reset
> +outputs to the system.
> +
> +Required Properties:
> +
> +- compatible: Should be:
> + - "mediatek,mt8135-pericfg", "syscon"
> + - "mediatek,mt8173-pericfg", "syscon"
> +- #clock-cells: Must be 1
> +- #reset-cells: Must be 1
> +
> +The pericfg controller uses the common clk binding from
> +Documentation/devicetree/bindings/clock/clock-bindings.txt
> +The available clocks are defined in dt-bindings/clock/mt*-clk.h.
> +Also it uses the common reset controller binding from
> +Documentation/devicetree/bindings/reset/reset.txt.
> +The available reset outputs are defined in
> +dt-bindings/reset-controller/mt*-resets.h
> +
> +Example:
> +
> +pericfg: pericfg@10003000 {
> + compatible = "mediatek,mt8173-pericfg", "syscon";
> + reg = <0 0x10003000 0 0x1000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> +};
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
> new file mode 100644
> index 0000000..a425248
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
> @@ -0,0 +1,23 @@
> +Mediatek topckgen controller
> +============================
> +
> +The Mediatek topckgen controller provides various clocks to the system.
> +
> +Required Properties:
> +
> +- compatible: Should be:
> + - "mediatek,mt8135-topckgen"
> + - "mediatek,mt8173-topckgen"
> +- #clock-cells: Must be 1
> +
> +The topckgen controller uses the common clk binding from
> +Documentation/devicetree/bindings/clock/clock-bindings.txt
> +The available clocks are defined in dt-bindings/clock/mt*-clk.h.
> +
> +Example:
> +
> +topckgen: topckgen@10000000 {
> + compatible = "mediatek,mt8173-topckgen";
> + reg = <0 0x10000000 0 0x1000>;
> + #clock-cells = <1>;
> +};
>
^ permalink raw reply [flat|nested] 53+ messages in thread* [PATCH 6/6] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock/reset controllers
@ 2015-03-27 13:32 ` Matthias Brugger
0 siblings, 0 replies; 53+ messages in thread
From: Matthias Brugger @ 2015-03-27 13:32 UTC (permalink / raw)
To: linux-arm-kernel
On 19/03/15 09:42, Sascha Hauer wrote:
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The patch should have a text as description.
Thanks,
Matthias
> ---
> .../bindings/arm/mediatek/mediatek,apmixedsys.txt | 23 +++++++++++++++++
> .../bindings/arm/mediatek/mediatek,infracfg.txt | 30 ++++++++++++++++++++++
> .../bindings/arm/mediatek/mediatek,pericfg.txt | 30 ++++++++++++++++++++++
> .../bindings/arm/mediatek/mediatek,topckgen.txt | 23 +++++++++++++++++
> 4 files changed, 106 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
> new file mode 100644
> index 0000000..5af6d73
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
> @@ -0,0 +1,23 @@
> +Mediatek apmixedsys controller
> +==============================
> +
> +The Mediatek apmixedsys controller provides the PLLs to the system.
> +
> +Required Properties:
> +
> +- compatible: Should be:
> + - "mediatek,mt8135-apmixedsys"
> + - "mediatek,mt8173-apmixedsys"
> +- #clock-cells: Must be 1
> +
> +The apmixedsys controller uses the common clk binding from
> +Documentation/devicetree/bindings/clock/clock-bindings.txt
> +The available clocks are defined in dt-bindings/clock/mt*-clk.h.
> +
> +Example:
> +
> +apmixedsys: apmixedsys at 10209000 {
> + compatible = "mediatek,mt8173-apmixedsys";
> + reg = <0 0x10209000 0 0x1000>;
> + #clock-cells = <1>;
> +};
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
> new file mode 100644
> index 0000000..684da473
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
> @@ -0,0 +1,30 @@
> +Mediatek infracfg controller
> +============================
> +
> +The Mediatek infracfg controller provides various clocks and reset
> +outputs to the system.
> +
> +Required Properties:
> +
> +- compatible: Should be:
> + - "mediatek,mt8135-infracfg", "syscon"
> + - "mediatek,mt8173-infracfg", "syscon"
> +- #clock-cells: Must be 1
> +- #reset-cells: Must be 1
> +
> +The infracfg controller uses the common clk binding from
> +Documentation/devicetree/bindings/clock/clock-bindings.txt
> +The available clocks are defined in dt-bindings/clock/mt*-clk.h.
> +Also it uses the common reset controller binding from
> +Documentation/devicetree/bindings/reset/reset.txt.
> +The available reset outputs are defined in
> +dt-bindings/reset-controller/mt*-resets.h
> +
> +Example:
> +
> +infracfg: infracfg at 10001000 {
> + compatible = "mediatek,mt8173-infracfg", "syscon";
> + reg = <0 0x10001000 0 0x1000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> +};
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
> new file mode 100644
> index 0000000..fdb45c6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
> @@ -0,0 +1,30 @@
> +Mediatek pericfg controller
> +===========================
> +
> +The Mediatek pericfg controller provides various clocks and reset
> +outputs to the system.
> +
> +Required Properties:
> +
> +- compatible: Should be:
> + - "mediatek,mt8135-pericfg", "syscon"
> + - "mediatek,mt8173-pericfg", "syscon"
> +- #clock-cells: Must be 1
> +- #reset-cells: Must be 1
> +
> +The pericfg controller uses the common clk binding from
> +Documentation/devicetree/bindings/clock/clock-bindings.txt
> +The available clocks are defined in dt-bindings/clock/mt*-clk.h.
> +Also it uses the common reset controller binding from
> +Documentation/devicetree/bindings/reset/reset.txt.
> +The available reset outputs are defined in
> +dt-bindings/reset-controller/mt*-resets.h
> +
> +Example:
> +
> +pericfg: pericfg at 10003000 {
> + compatible = "mediatek,mt8173-pericfg", "syscon";
> + reg = <0 0x10003000 0 0x1000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> +};
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
> new file mode 100644
> index 0000000..a425248
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
> @@ -0,0 +1,23 @@
> +Mediatek topckgen controller
> +============================
> +
> +The Mediatek topckgen controller provides various clocks to the system.
> +
> +Required Properties:
> +
> +- compatible: Should be:
> + - "mediatek,mt8135-topckgen"
> + - "mediatek,mt8173-topckgen"
> +- #clock-cells: Must be 1
> +
> +The topckgen controller uses the common clk binding from
> +Documentation/devicetree/bindings/clock/clock-bindings.txt
> +The available clocks are defined in dt-bindings/clock/mt*-clk.h.
> +
> +Example:
> +
> +topckgen: topckgen at 10000000 {
> + compatible = "mediatek,mt8173-topckgen";
> + reg = <0 0x10000000 0 0x1000>;
> + #clock-cells = <1>;
> +};
>
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [PATCH v8]: clk: Add common clock support for Mediatek MT8135 and MT8173
2015-03-19 8:42 ` Sascha Hauer
@ 2015-03-27 6:05 ` Sascha Hauer
-1 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-27 6:05 UTC (permalink / raw)
To: Mike Turquette, Stephen Boyd
Cc: YH Chen, linux-kernel, Henry Chen, linux-mediatek, kernel,
Matthias Brugger, Yingjoe Chen, Eddie Huang, linux-arm-kernel
Mike, Stephen,
Any chance to get this forward please?
Sascha
On Thu, Mar 19, 2015 at 09:42:04AM +0100, Sascha Hauer wrote:
>
> The following changes since commit 9eccca0843205f87c00404b663188b88eb248051:
>
> Linux 4.0-rc3 (2015-03-08 16:09:09 -0700)
>
> are available in the git repository at:
>
> git://git.pengutronix.de/git/imx/linux-2.6.git tags/v4.0-clk-mediatek-v8
>
> for you to fetch changes up to 54449c74078c9d93619757c7a91b820eaa28c0f4:
>
> dt-bindings: ARM: Mediatek: Document devicetree bindings for clock/reset controllers (2015-03-19 09:15:33 +0100)
>
> ----------------------------------------------------------------
> This patchset contains the initial common clock support for Mediatek SoCs.
> Mediatek SoC's clock architecture comprises of various PLLs, dividers, muxes
> and clock gates.
>
> Changes in v8:
> - add patch to allow to put parent_name arrays in __initconst
> - put parent_name arrays into __initconst
>
> Changes in v7:
> - fix duplicate definition/declaration of mtk_register_reset_controller
> - fix pd_reg offset of tvdpll
> - make clk initialization arrays const
>
> Changes in v6:
> - rework PLL support, only a fraction of original size now
> - Move binding docs to Documentation/devicetree/bindings/arm/mediatek since
> the units are not really clock specific (they contain reset controllers)
>
> Changes in v5:
> - Add reset controller support for pericfg/infracfg
> - Use regmap for the gates
> - remove now unnecessary spinlock for the gates
> - Add PMIC wrapper support as of v3
>
> Changes in v4:
> - Support MT8173 platform.
> - Re-ordered patchset. driver/clk/Makefile in 2nd patch.
> - Extract the common part definition(mtk_gate/mtk_pll/mtk_mux) from
> clk-mt8135.c/clk-mt8173.c to clk-mtk.c.
> - Refine code. Rmove unnessacary debug information and unsed defines,
> add prefix "mtk_" for static functions.
> - Remove flag CLK_IGNORE_UNUSED and set flag CLK_SET_RATE_PARENT on
> gate/mux/fixed-factor.
> - Use spin_lock_irqsave(&clk_ops_lock, flags) instead of mtk_clk_lock.
> - Example above include a node for the clock controller itself, followed
> by the i2c controller example above.
>
> Changes in v3:
> - Rebase to 3.19-rc1.
> - Refine code. Remove unneed functions, debug logs and comments, and fine tune
> error logs.
>
> Changes in v2:
> - Re-ordered patchset. Fold include/dt-bindings and DT document in 1st patch.
>
> ----------------------------------------------------------------
> James Liao (3):
> clk: mediatek: Add initial common clock support for Mediatek SoCs.
> clk: mediatek: Add basic clocks for Mediatek MT8135.
> clk: mediatek: Add basic clocks for Mediatek MT8173.
>
> Sascha Hauer (3):
> clk: make strings in parent name arrays const
> clk: mediatek: Add reset controller support
> dt-bindings: ARM: Mediatek: Document devicetree bindings for clock/reset controllers
>
> .../bindings/arm/mediatek/mediatek,apmixedsys.txt | 23 +
> .../bindings/arm/mediatek/mediatek,infracfg.txt | 30 +
> .../bindings/arm/mediatek/mediatek,pericfg.txt | 30 +
> .../bindings/arm/mediatek/mediatek,topckgen.txt | 23 +
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-composite.c | 2 +-
> drivers/clk/clk-mux.c | 4 +-
> drivers/clk/mediatek/Makefile | 4 +
> drivers/clk/mediatek/clk-gate.c | 137 ++++
> drivers/clk/mediatek/clk-gate.h | 49 ++
> drivers/clk/mediatek/clk-mt8135.c | 640 ++++++++++++++++
> drivers/clk/mediatek/clk-mt8173.c | 826 +++++++++++++++++++++
> drivers/clk/mediatek/clk-mtk.c | 197 +++++
> drivers/clk/mediatek/clk-mtk.h | 165 ++++
> drivers/clk/mediatek/clk-pll.c | 325 ++++++++
> drivers/clk/mediatek/reset.c | 99 +++
> include/dt-bindings/clock/mt8135-clk.h | 190 +++++
> include/dt-bindings/clock/mt8173-clk.h | 231 ++++++
> .../dt-bindings/reset-controller/mt8135-resets.h | 64 ++
> .../dt-bindings/reset-controller/mt8173-resets.h | 63 ++
> include/linux/clk-provider.h | 8 +-
> 21 files changed, 3104 insertions(+), 7 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
> create mode 100644 drivers/clk/mediatek/Makefile
> create mode 100644 drivers/clk/mediatek/clk-gate.c
> create mode 100644 drivers/clk/mediatek/clk-gate.h
> create mode 100644 drivers/clk/mediatek/clk-mt8135.c
> create mode 100644 drivers/clk/mediatek/clk-mt8173.c
> create mode 100644 drivers/clk/mediatek/clk-mtk.c
> create mode 100644 drivers/clk/mediatek/clk-mtk.h
> create mode 100644 drivers/clk/mediatek/clk-pll.c
> create mode 100644 drivers/clk/mediatek/reset.c
> create mode 100644 include/dt-bindings/clock/mt8135-clk.h
> create mode 100644 include/dt-bindings/clock/mt8173-clk.h
> create mode 100644 include/dt-bindings/reset-controller/mt8135-resets.h
> create mode 100644 include/dt-bindings/reset-controller/mt8173-resets.h
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 53+ messages in thread
* [PATCH v8]: clk: Add common clock support for Mediatek MT8135 and MT8173
@ 2015-03-27 6:05 ` Sascha Hauer
0 siblings, 0 replies; 53+ messages in thread
From: Sascha Hauer @ 2015-03-27 6:05 UTC (permalink / raw)
To: linux-arm-kernel
Mike, Stephen,
Any chance to get this forward please?
Sascha
On Thu, Mar 19, 2015 at 09:42:04AM +0100, Sascha Hauer wrote:
>
> The following changes since commit 9eccca0843205f87c00404b663188b88eb248051:
>
> Linux 4.0-rc3 (2015-03-08 16:09:09 -0700)
>
> are available in the git repository at:
>
> git://git.pengutronix.de/git/imx/linux-2.6.git tags/v4.0-clk-mediatek-v8
>
> for you to fetch changes up to 54449c74078c9d93619757c7a91b820eaa28c0f4:
>
> dt-bindings: ARM: Mediatek: Document devicetree bindings for clock/reset controllers (2015-03-19 09:15:33 +0100)
>
> ----------------------------------------------------------------
> This patchset contains the initial common clock support for Mediatek SoCs.
> Mediatek SoC's clock architecture comprises of various PLLs, dividers, muxes
> and clock gates.
>
> Changes in v8:
> - add patch to allow to put parent_name arrays in __initconst
> - put parent_name arrays into __initconst
>
> Changes in v7:
> - fix duplicate definition/declaration of mtk_register_reset_controller
> - fix pd_reg offset of tvdpll
> - make clk initialization arrays const
>
> Changes in v6:
> - rework PLL support, only a fraction of original size now
> - Move binding docs to Documentation/devicetree/bindings/arm/mediatek since
> the units are not really clock specific (they contain reset controllers)
>
> Changes in v5:
> - Add reset controller support for pericfg/infracfg
> - Use regmap for the gates
> - remove now unnecessary spinlock for the gates
> - Add PMIC wrapper support as of v3
>
> Changes in v4:
> - Support MT8173 platform.
> - Re-ordered patchset. driver/clk/Makefile in 2nd patch.
> - Extract the common part definition(mtk_gate/mtk_pll/mtk_mux) from
> clk-mt8135.c/clk-mt8173.c to clk-mtk.c.
> - Refine code. Rmove unnessacary debug information and unsed defines,
> add prefix "mtk_" for static functions.
> - Remove flag CLK_IGNORE_UNUSED and set flag CLK_SET_RATE_PARENT on
> gate/mux/fixed-factor.
> - Use spin_lock_irqsave(&clk_ops_lock, flags) instead of mtk_clk_lock.
> - Example above include a node for the clock controller itself, followed
> by the i2c controller example above.
>
> Changes in v3:
> - Rebase to 3.19-rc1.
> - Refine code. Remove unneed functions, debug logs and comments, and fine tune
> error logs.
>
> Changes in v2:
> - Re-ordered patchset. Fold include/dt-bindings and DT document in 1st patch.
>
> ----------------------------------------------------------------
> James Liao (3):
> clk: mediatek: Add initial common clock support for Mediatek SoCs.
> clk: mediatek: Add basic clocks for Mediatek MT8135.
> clk: mediatek: Add basic clocks for Mediatek MT8173.
>
> Sascha Hauer (3):
> clk: make strings in parent name arrays const
> clk: mediatek: Add reset controller support
> dt-bindings: ARM: Mediatek: Document devicetree bindings for clock/reset controllers
>
> .../bindings/arm/mediatek/mediatek,apmixedsys.txt | 23 +
> .../bindings/arm/mediatek/mediatek,infracfg.txt | 30 +
> .../bindings/arm/mediatek/mediatek,pericfg.txt | 30 +
> .../bindings/arm/mediatek/mediatek,topckgen.txt | 23 +
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-composite.c | 2 +-
> drivers/clk/clk-mux.c | 4 +-
> drivers/clk/mediatek/Makefile | 4 +
> drivers/clk/mediatek/clk-gate.c | 137 ++++
> drivers/clk/mediatek/clk-gate.h | 49 ++
> drivers/clk/mediatek/clk-mt8135.c | 640 ++++++++++++++++
> drivers/clk/mediatek/clk-mt8173.c | 826 +++++++++++++++++++++
> drivers/clk/mediatek/clk-mtk.c | 197 +++++
> drivers/clk/mediatek/clk-mtk.h | 165 ++++
> drivers/clk/mediatek/clk-pll.c | 325 ++++++++
> drivers/clk/mediatek/reset.c | 99 +++
> include/dt-bindings/clock/mt8135-clk.h | 190 +++++
> include/dt-bindings/clock/mt8173-clk.h | 231 ++++++
> .../dt-bindings/reset-controller/mt8135-resets.h | 64 ++
> .../dt-bindings/reset-controller/mt8173-resets.h | 63 ++
> include/linux/clk-provider.h | 8 +-
> 21 files changed, 3104 insertions(+), 7 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
> create mode 100644 drivers/clk/mediatek/Makefile
> create mode 100644 drivers/clk/mediatek/clk-gate.c
> create mode 100644 drivers/clk/mediatek/clk-gate.h
> create mode 100644 drivers/clk/mediatek/clk-mt8135.c
> create mode 100644 drivers/clk/mediatek/clk-mt8173.c
> create mode 100644 drivers/clk/mediatek/clk-mtk.c
> create mode 100644 drivers/clk/mediatek/clk-mtk.h
> create mode 100644 drivers/clk/mediatek/clk-pll.c
> create mode 100644 drivers/clk/mediatek/reset.c
> create mode 100644 include/dt-bindings/clock/mt8135-clk.h
> create mode 100644 include/dt-bindings/clock/mt8173-clk.h
> create mode 100644 include/dt-bindings/reset-controller/mt8135-resets.h
> create mode 100644 include/dt-bindings/reset-controller/mt8173-resets.h
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [PATCH v8]: clk: Add common clock support for Mediatek MT8135 and MT8173
2015-03-27 6:05 ` Sascha Hauer
@ 2015-03-27 8:02 ` Stephen Boyd
-1 siblings, 0 replies; 53+ messages in thread
From: Stephen Boyd @ 2015-03-27 8:02 UTC (permalink / raw)
To: Sascha Hauer
Cc: Mike Turquette, YH Chen, linux-kernel, Henry Chen,
linux-mediatek, kernel, Matthias Brugger, Yingjoe Chen,
Eddie Huang, linux-arm-kernel
On 03/27, Sascha Hauer wrote:
> Mike, Stephen,
>
> Any chance to get this forward please?
>
Looks ok to me except for the minor nitpick on lock names.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 53+ messages in thread
* [PATCH v8]: clk: Add common clock support for Mediatek MT8135 and MT8173
@ 2015-03-27 8:02 ` Stephen Boyd
0 siblings, 0 replies; 53+ messages in thread
From: Stephen Boyd @ 2015-03-27 8:02 UTC (permalink / raw)
To: linux-arm-kernel
On 03/27, Sascha Hauer wrote:
> Mike, Stephen,
>
> Any chance to get this forward please?
>
Looks ok to me except for the minor nitpick on lock names.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 53+ messages in thread