All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ARM: cpu: Add ARMv7 barrier operations support
Date: Fri, 20 Mar 2015 18:16:17 +0300	[thread overview]
Message-ID: <1426864577-9767-1-git-send-email-vladimir.barinov@cogentembedded.com> (raw)

From: Valentine Barshak <valentine.barshak@cogentembedded.com>

This enables ARMv7 barrier operations support when
march=armv7-a is enabled.

Using CP15 barriers causes U-Boot bootm command crash when
transferring control to the loaded image on Renesas R8A7794 Cortex A7 CPU.
Using ARMv7 barrier operations instead of the deprecated CP15 barriers
helps to avoid these issues.

Signed-off-by: Valentine Barshak <valentine.barshak+renesas@cogentembedded.com>
Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---
 arch/arm/cpu/armv7/cache_v7.c | 14 +++++++-------
 arch/arm/include/asm/armv7.h  | 10 ++++++++++
 2 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/arch/arm/cpu/armv7/cache_v7.c b/arch/arm/cpu/armv7/cache_v7.c
index 0f9d837..e8ee875 100644
--- a/arch/arm/cpu/armv7/cache_v7.c
+++ b/arch/arm/cpu/armv7/cache_v7.c
@@ -68,7 +68,7 @@ static void v7_inval_dcache_level_setway(u32 level, u32 num_sets,
 		}
 	}
 	/* DSB to make sure the operation is complete */
-	CP15DSB;
+	DSB;
 }
 
 static void v7_clean_inval_dcache_level_setway(u32 level, u32 num_sets,
@@ -96,7 +96,7 @@ static void v7_clean_inval_dcache_level_setway(u32 level, u32 num_sets,
 		}
 	}
 	/* DSB to make sure the operation is complete */
-	CP15DSB;
+	DSB;
 }
 
 static void v7_maint_dcache_level_setway(u32 level, u32 operation)
@@ -215,7 +215,7 @@ static void v7_dcache_maint_range(u32 start, u32 stop, u32 range_op)
 	}
 
 	/* DSB to make sure the operation is complete */
-	CP15DSB;
+	DSB;
 }
 
 /* Invalidate TLB */
@@ -228,9 +228,9 @@ static void v7_inval_tlb(void)
 	/* Invalidate entire instruction TLB */
 	asm volatile ("mcr p15, 0, %0, c8, c5, 0" : : "r" (0));
 	/* Full system DSB - make sure that the invalidation is complete */
-	CP15DSB;
+	DSB;
 	/* Full system ISB - make sure the instruction stream sees it */
-	CP15ISB;
+	ISB;
 }
 
 void invalidate_dcache_all(void)
@@ -343,10 +343,10 @@ void invalidate_icache_all(void)
 	asm volatile ("mcr p15, 0, %0, c7, c5, 6" : : "r" (0));
 
 	/* Full system DSB - make sure that the invalidation is complete */
-	CP15DSB;
+	DSB;
 
 	/* ISB - make sure the instruction stream sees it */
-	CP15ISB;
+	ISB;
 }
 #else
 void invalidate_icache_all(void)
diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
index a13da23..189f3f0 100644
--- a/arch/arm/include/asm/armv7.h
+++ b/arch/arm/include/asm/armv7.h
@@ -70,6 +70,16 @@
 #define CP15DSB	asm volatile ("mcr     p15, 0, %0, c7, c10, 4" : : "r" (0))
 #define CP15DMB	asm volatile ("mcr     p15, 0, %0, c7, c10, 5" : : "r" (0))
 
+#ifdef __ARM_ARCH_7A__
+#define ISB	asm volatile ("isb" : : : "memory")
+#define DSB	asm volatile ("dsb" : : : "memory")
+#define DMB	asm volatile ("dmb" : : : "memory")
+#else
+#define ISB	CP15ISB
+#define DSB	CP15DSB
+#define DMB	CP15DMB
+#endif
+
 /*
  * Workaround for ARM errata # 798870
  * Set L2ACTLR[7] to reissue any memory transaction in the L2 that has been
-- 
1.9.3

             reply	other threads:[~2015-03-20 15:16 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-20 15:16 Vladimir Barinov [this message]
2015-03-25  7:47 ` [U-Boot] [PATCH] ARM: cpu: Add ARMv7 barrier operations support Nobuhiro Iwamatsu
2015-04-16 12:06 ` Albert ARIBAUD
2015-08-20 20:02 ` Vladimir Barinov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426864577-9767-1-git-send-email-vladimir.barinov@cogentembedded.com \
    --to=vladimir.barinov@cogentembedded.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.