From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hanjun Guo Subject: [patch v11 08/23] ARM64 / ACPI: Introduce early_param "acpi=" to enable/disable ACPI Date: Tue, 24 Mar 2015 22:02:41 +0800 Message-ID: <1427205776-5060-9-git-send-email-hanjun.guo@linaro.org> References: <1427205776-5060-1-git-send-email-hanjun.guo@linaro.org> Return-path: In-Reply-To: <1427205776-5060-1-git-send-email-hanjun.guo@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Catalin Marinas , "Rafael J. Wysocki" , Will Deacon , Olof Johansson , Grant Likely Cc: Lorenzo Pieralisi , Arnd Bergmann , Mark Rutland , Graeme Gregory , Sudeep Holla , Jon Masters , Marc Zyngier , Mark Brown , Robert Richter , Timur Tabi , Ashwin Chaugule , Suravee Suthikulpanit , Mark Salter , linux-acpi@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linaro-acpi@lists.linaro.org, Al Stone , Hanjun Guo , Ard Biesheuvel List-Id: linux-acpi@vger.kernel.org From: Al Stone This implements the following policy to decide whether ACPI should be used to boot the system: - acpi=off: ACPI will not be used to boot the system, even if there is no alternative available (e.g., device tree is empty) - acpi=force: only ACPI will be used to boot the system; if that fails, there will be no fallback to alternative methods (such as device tree) - otherwise, ACPI will be used as a fallback if the device tree turns out to lack a platform description; the heuristic to decide this is whether /chosen is the only node present at depth 1 CC: Catalin Marinas CC: Will Deacon CC: Rafael J. Wysocki Acked-by: Olof Johansson Acked-by: Grant Likely Tested-by: Timur Tabi Signed-off-by: Al Stone Signed-off-by: Graeme Gregory Signed-off-by: Hanjun Guo Signed-off-by: Ard Biesheuvel --- Documentation/kernel-parameters.txt | 3 ++- arch/arm64/include/asm/acpi.h | 7 +++++ arch/arm64/kernel/acpi.c | 52 +++++++++++++++++++++++++++++++++---- 3 files changed, 56 insertions(+), 6 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index bfcb1a6..d6c35a7 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -165,7 +165,7 @@ multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30 bytes respectively. Such letter suffixes can also be entirely omitted. - acpi= [HW,ACPI,X86] + acpi= [HW,ACPI,X86,ARM64] Advanced Configuration and Power Interface Format: { force | off | strict | noirq | rsdt } force -- enable ACPI if default was off @@ -175,6 +175,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. strictly ACPI specification compliant. rsdt -- prefer RSDT over (default) XSDT copy_dsdt -- copy DSDT to memory + For ARM64, ONLY "acpi=off" or "acpi=force" are available See also Documentation/power/runtime_pm.txt, pci=noacpi diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index 40e0924..c5a9b97 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -39,6 +39,13 @@ static inline void disable_acpi(void) acpi_noirq = 1; } +static inline void enable_acpi(void) +{ + acpi_disabled = 0; + acpi_pci_disabled = 0; + acpi_noirq = 0; +} + /* * It's used from ACPI core in kdump to boot UP system with SMP kernel, * with this check the ACPI core will not override the CPU index diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index 7abac24..2269e30 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -22,15 +22,49 @@ #include #include #include +#include #include -int acpi_noirq; /* skip ACPI IRQ initialization */ -int acpi_disabled; +int acpi_noirq = 1; /* skip ACPI IRQ initialization */ +int acpi_disabled = 1; EXPORT_SYMBOL(acpi_disabled); -int acpi_pci_disabled; /* skip ACPI PCI scan and IRQ initialization */ +int acpi_pci_disabled = 1; /* skip ACPI PCI scan and IRQ initialization */ EXPORT_SYMBOL(acpi_pci_disabled); +static bool param_acpi_off __initdata; +static bool param_acpi_force __initdata; + +static int __init parse_acpi(char *arg) +{ + if (!arg) + return -EINVAL; + + /* "acpi=off" disables both ACPI table parsing and interpreter */ + if (strcmp(arg, "off") == 0) + param_acpi_off = true; + else if (strcmp(arg, "force") == 0) /* force ACPI to be enabled */ + param_acpi_force = true; + else + return -EINVAL; /* Core will print when we return error */ + + return 0; +} +early_param("acpi", parse_acpi); + +static int __init dt_scan_depth1_nodes(unsigned long node, + const char *uname, int depth, + void *data) +{ + /* + * Return 1 as soon as we encounter a node at depth 1 that is + * not the /chosen node. + */ + if (depth == 1 && (strcmp(uname, "chosen") != 0)) + return 1; + return 0; +} + /* * __acpi_map_table() will be called before page_init(), so early_ioremap() * or early_memremap() should be called here to for ACPI table mapping. @@ -83,10 +117,18 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table) */ void __init acpi_boot_table_init(void) { - /* If acpi_disabled, bail out */ - if (acpi_disabled) + /* + * Enable ACPI instead of device tree unless + * - ACPI has been disabled explicitly (acpi=off), or + * - the device tree is not empty (it has more than just a /chosen node) + * and ACPI has not been force enabled (acpi=force) + */ + if (param_acpi_off || + (!param_acpi_force && of_scan_flat_dt(dt_scan_depth1_nodes, NULL))) return; + enable_acpi(); + /* Initialize the ACPI boot-time table parser. */ if (acpi_table_init()) { disable_acpi(); -- 1.9.1 From mboxrd@z Thu Jan 1 00:00:00 1970 From: hanjun.guo@linaro.org (Hanjun Guo) Date: Tue, 24 Mar 2015 22:02:41 +0800 Subject: [patch v11 08/23] ARM64 / ACPI: Introduce early_param "acpi=" to enable/disable ACPI In-Reply-To: <1427205776-5060-1-git-send-email-hanjun.guo@linaro.org> References: <1427205776-5060-1-git-send-email-hanjun.guo@linaro.org> Message-ID: <1427205776-5060-9-git-send-email-hanjun.guo@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Al Stone This implements the following policy to decide whether ACPI should be used to boot the system: - acpi=off: ACPI will not be used to boot the system, even if there is no alternative available (e.g., device tree is empty) - acpi=force: only ACPI will be used to boot the system; if that fails, there will be no fallback to alternative methods (such as device tree) - otherwise, ACPI will be used as a fallback if the device tree turns out to lack a platform description; the heuristic to decide this is whether /chosen is the only node present at depth 1 CC: Catalin Marinas CC: Will Deacon CC: Rafael J. Wysocki Acked-by: Olof Johansson Acked-by: Grant Likely Tested-by: Timur Tabi Signed-off-by: Al Stone Signed-off-by: Graeme Gregory Signed-off-by: Hanjun Guo Signed-off-by: Ard Biesheuvel --- Documentation/kernel-parameters.txt | 3 ++- arch/arm64/include/asm/acpi.h | 7 +++++ arch/arm64/kernel/acpi.c | 52 +++++++++++++++++++++++++++++++++---- 3 files changed, 56 insertions(+), 6 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index bfcb1a6..d6c35a7 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -165,7 +165,7 @@ multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30 bytes respectively. Such letter suffixes can also be entirely omitted. - acpi= [HW,ACPI,X86] + acpi= [HW,ACPI,X86,ARM64] Advanced Configuration and Power Interface Format: { force | off | strict | noirq | rsdt } force -- enable ACPI if default was off @@ -175,6 +175,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. strictly ACPI specification compliant. rsdt -- prefer RSDT over (default) XSDT copy_dsdt -- copy DSDT to memory + For ARM64, ONLY "acpi=off" or "acpi=force" are available See also Documentation/power/runtime_pm.txt, pci=noacpi diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index 40e0924..c5a9b97 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -39,6 +39,13 @@ static inline void disable_acpi(void) acpi_noirq = 1; } +static inline void enable_acpi(void) +{ + acpi_disabled = 0; + acpi_pci_disabled = 0; + acpi_noirq = 0; +} + /* * It's used from ACPI core in kdump to boot UP system with SMP kernel, * with this check the ACPI core will not override the CPU index diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index 7abac24..2269e30 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -22,15 +22,49 @@ #include #include #include +#include #include -int acpi_noirq; /* skip ACPI IRQ initialization */ -int acpi_disabled; +int acpi_noirq = 1; /* skip ACPI IRQ initialization */ +int acpi_disabled = 1; EXPORT_SYMBOL(acpi_disabled); -int acpi_pci_disabled; /* skip ACPI PCI scan and IRQ initialization */ +int acpi_pci_disabled = 1; /* skip ACPI PCI scan and IRQ initialization */ EXPORT_SYMBOL(acpi_pci_disabled); +static bool param_acpi_off __initdata; +static bool param_acpi_force __initdata; + +static int __init parse_acpi(char *arg) +{ + if (!arg) + return -EINVAL; + + /* "acpi=off" disables both ACPI table parsing and interpreter */ + if (strcmp(arg, "off") == 0) + param_acpi_off = true; + else if (strcmp(arg, "force") == 0) /* force ACPI to be enabled */ + param_acpi_force = true; + else + return -EINVAL; /* Core will print when we return error */ + + return 0; +} +early_param("acpi", parse_acpi); + +static int __init dt_scan_depth1_nodes(unsigned long node, + const char *uname, int depth, + void *data) +{ + /* + * Return 1 as soon as we encounter a node at depth 1 that is + * not the /chosen node. + */ + if (depth == 1 && (strcmp(uname, "chosen") != 0)) + return 1; + return 0; +} + /* * __acpi_map_table() will be called before page_init(), so early_ioremap() * or early_memremap() should be called here to for ACPI table mapping. @@ -83,10 +117,18 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table) */ void __init acpi_boot_table_init(void) { - /* If acpi_disabled, bail out */ - if (acpi_disabled) + /* + * Enable ACPI instead of device tree unless + * - ACPI has been disabled explicitly (acpi=off), or + * - the device tree is not empty (it has more than just a /chosen node) + * and ACPI has not been force enabled (acpi=force) + */ + if (param_acpi_off || + (!param_acpi_force && of_scan_flat_dt(dt_scan_depth1_nodes, NULL))) return; + enable_acpi(); + /* Initialize the ACPI boot-time table parser. */ if (acpi_table_init()) { disable_acpi(); -- 1.9.1