* [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
@ 2013-11-12 5:10 Michael Opdenacker
2013-11-12 8:32 ` Arend van Spriel
0 siblings, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2013-11-12 5:10 UTC (permalink / raw)
To: trivial; +Cc: linux-kernel, Michael Opdenacker
Fix all occurrences of "the the " in the source code,
comments and documentation.
The replacement couldn't be automated because sometimes
the first "the" was meant to be another word.
Example: "according the the"
meaning: "according to the"
Note that I sometimes took the opportunity to fix
other spelling issues or typos in the same sentences.
I also fixed a few checkpatch errors in the same
lines.
This is an update to the patch sent on Sep. 12, 2013
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
---
Documentation/ABI/testing/sysfs-devices-memory | 2 +-
Documentation/DocBook/media/v4l/controls.xml | 2 +-
Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
Documentation/devicetree/bindings/arm/msm/timer.txt | 2 +-
Documentation/devicetree/bindings/ata/cavium-compact-flash.txt | 2 +-
Documentation/devicetree/bindings/mtd/fsmc-nand.txt | 2 +-
Documentation/email-clients.txt | 2 +-
Documentation/filesystems/autofs4-mount-control.txt | 6 +++---
Documentation/futex-requeue-pi.txt | 2 +-
Documentation/input/multi-touch-protocol.txt | 2 +-
Documentation/io-mapping.txt | 2 +-
Documentation/kmemcheck.txt | 2 +-
Documentation/networking/spider_net.txt | 2 +-
Documentation/phy.txt | 2 +-
Documentation/power/devices.txt | 2 +-
Documentation/security/Smack.txt | 2 +-
Documentation/static-keys.txt | 2 +-
Documentation/trace/ring-buffer-design.txt | 2 +-
Documentation/usb/WUSB-Design-overview.txt | 2 +-
Documentation/virtual/kvm/api.txt | 2 +-
Documentation/vm/unevictable-lru.txt | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/unwind.h | 2 +-
arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
arch/arm/mach-pxa/stargate2.c | 2 +-
arch/blackfin/mach-common/entry.S | 2 +-
arch/c6x/platforms/cache.c | 2 +-
arch/ia64/include/asm/spinlock.h | 2 +-
arch/ia64/include/asm/uv/uv_hub.h | 2 +-
arch/m68k/platform/coldfire/intc-2.c | 2 +-
arch/metag/kernel/process.c | 2 +-
arch/microblaze/kernel/entry.S | 2 +-
arch/mips/alchemy/devboards/pm.c | 2 +-
arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
arch/mips/include/asm/spinlock.h | 2 +-
arch/mips/kernel/smtc.c | 2 +-
arch/mips/kvm/kvm_mips.c | 2 +-
arch/mips/mm/c-octeon.c | 4 ++--
arch/mips/netlogic/xlr/fmn.c | 2 +-
arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
arch/powerpc/kernel/head_64.S | 2 +-
arch/powerpc/mm/gup.c | 2 +-
arch/powerpc/mm/hugetlbpage.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/platforms/chrp/setup.c | 2 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
arch/s390/mm/gup.c | 2 +-
arch/sparc/kernel/pci.c | 2 +-
arch/sparc/mm/gup.c | 2 +-
arch/tile/include/asm/irqflags.h | 2 +-
arch/tile/include/gxio/trio.h | 2 +-
arch/tile/kernel/single_step.c | 2 +-
arch/x86/include/asm/spinlock.h | 2 +-
arch/x86/include/asm/uv/uv_hub.h | 2 +-
arch/x86/kvm/x86.c | 2 +-
arch/x86/mm/gup.c | 4 ++--
arch/x86/xen/setup.c | 2 +-
arch/xtensa/include/asm/initialize_mmu.h | 2 +-
arch/xtensa/kernel/entry.S | 4 ++--
drivers/acpi/acpica/accommon.h | 2 +-
drivers/block/drbd/drbd_main.c | 2 +-
drivers/char/apm-emulation.c | 2 +-
drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
drivers/cpuidle/driver.c | 4 ++--
drivers/crypto/picoxcell_crypto.c | 2 +-
drivers/crypto/ux500/hash/hash_core.c | 2 +-
drivers/gpio/gpio-ich.c | 2 +-
drivers/gpu/drm/i915/i915_gem.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 4 ++--
drivers/gpu/drm/radeon/atombios.h | 4 ++--
drivers/gpu/drm/radeon/r300_reg.h | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 2 +-
drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
drivers/gpu/drm/radeon/radeon_gart.c | 2 +-
drivers/hv/channel.c | 4 ++--
drivers/hv/vmbus_drv.c | 2 +-
drivers/hwmon/pmbus/ucd9200.c | 2 +-
drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
drivers/infiniband/hw/qib/qib.h | 2 +-
drivers/input/mouse/gpio_mouse.c | 2 +-
drivers/input/touchscreen/atmel_mxt_ts.c | 2 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
drivers/lguest/core.c | 2 +-
drivers/media/dvb-frontends/tda1002x.h | 2 +-
drivers/media/dvb-frontends/tda10048.c | 2 +-
drivers/media/pci/cx88/cx88-dsp.c | 2 +-
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/saa7164/saa7164-core.c | 2 +-
drivers/media/platform/davinci/vpbe.c | 2 +-
drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/rc/iguanair.c | 2 +-
drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
drivers/media/usb/dvb-usb/friio.c | 2 +-
drivers/media/usb/dvb-usb/friio.h | 2 +-
drivers/media/usb/gspca/finepix.c | 2 +-
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/memory/emif.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/mfd/db8500-prcmu.c | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/ubi/ubi.h | 4 ++--
drivers/mtd/ubi/wl.c | 2 +-
drivers/net/ethernet/calxeda/xgmac.c | 2 +-
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +-
drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
drivers/net/wimax/i2400m/i2400m.h | 4 ++--
drivers/net/wimax/i2400m/rx.c | 2 +-
drivers/net/wimax/i2400m/tx.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++--
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 ++--
drivers/of/base.c | 2 +-
drivers/pci/hotplug/acpiphp_glue.c | 2 +-
drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
drivers/power/power_supply_sysfs.c | 5 +++--
drivers/rtc/rtc-rs5c372.c | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 6 +++---
drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++--
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/remote_device.h | 2 +-
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/spi/spi-ppc4xx.c | 2 +-
drivers/staging/android/binder.h | 2 +-
drivers/staging/et131x/et131x.c | 2 +-
drivers/staging/lustre/lustre/llite/file.c | 2 +-
drivers/staging/lustre/lustre/ptlrpc/pinger.c | 2 +-
drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c | 4 ++--
drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/rtl8712/rtl871x_cmd.c | 2 +-
drivers/staging/sep/sep_main.c | 6 +++---
drivers/staging/tidspbridge/include/dspbridge/drv.h | 4 ++--
drivers/staging/tidspbridge/pmgr/dev.c | 2 +-
drivers/staging/wlags49_h2/README.wlags49 | 2 +-
drivers/target/target_core_alua.c | 2 +-
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/mos7720.c | 4 ++--
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/uwb/drp-ie.c | 2 +-
drivers/video/omap/sossi.c | 2 +-
drivers/video/sis/sis_accel.c | 2 +-
fs/autofs4/dev-ioctl.c | 2 +-
fs/btrfs/dev-replace.c | 2 +-
fs/btrfs/send.c | 2 +-
fs/btrfs/tree-log.c | 2 +-
fs/dcache.c | 4 ++--
fs/ecryptfs/keystore.c | 2 +-
fs/ext2/ext2.h | 2 +-
fs/ext4/inline.c | 4 ++--
fs/f2fs/segment.h | 2 +-
fs/ocfs2/localalloc.c | 2 +-
fs/sysfs/file.c | 2 +-
fs/xfs/xfs_export.c | 2 +-
include/drm/drm_rect.h | 2 +-
include/linux/mm.h | 2 +-
include/linux/moduleparam.h | 2 +-
include/linux/skbuff.h | 2 +-
include/net/caif/caif_layer.h | 2 +-
include/net/ip6_fib.h | 2 +-
include/net/wimax.h | 2 +-
init/main.c | 2 +-
kernel/jump_label.c | 2 +-
kernel/printk/printk.c | 2 +-
kernel/smp.c | 2 +-
kernel/trace/ring_buffer.c | 2 +-
lib/bitmap.c | 2 +-
lib/dynamic_queue_limits.c | 2 +-
lib/earlycpio.c | 2 +-
lib/syscall.c | 2 +-
mm/hugetlb.c | 2 +-
mm/page_alloc.c | 2 +-
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/hci_core.c | 2 +-
net/sctp/chunk.c | 2 +-
net/sunrpc/auth_generic.c | 2 +-
net/tipc/link.c | 2 +-
net/wimax/op-rfkill.c | 2 +-
scripts/tracing/draw_functrace.py | 2 +-
security/apparmor/context.c | 2 +-
security/keys/keyctl.c | 2 +-
sound/pci/hda/hda_codec.c | 2 +-
sound/pci/hda/patch_sigmatel.c | 2 +-
sound/pci/ice1712/prodigy192.c | 2 +-
sound/soc/codecs/wm9713.c | 2 +-
sound/soc/fsl/fsl_dma.c | 2 +-
sound/soc/fsl/fsl_ssi.c | 2 +-
sound/sparc/dbri.c | 2 +-
tools/perf/Documentation/perf-diff.txt | 2 +-
tools/power/x86/turbostat/turbostat.8 | 4 ++--
216 files changed, 248 insertions(+), 247 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index 7405de26ee60..4b3c0208d0a5 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -45,7 +45,7 @@ Description:
The file /sys/devices/system/memory/memoryX/state
is read-write. When read, its contents show the
online/offline state of the memory section. When written,
- root can toggle the the online/offline state of a removable
+ root can toggle the online/offline state of a removable
memory section (see removable file description above)
using the following commands.
# echo online > /sys/devices/system/memory/memoryX/state
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 7a3b49b3cc3b..7cfc7c21e128 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3303,7 +3303,7 @@ giving priority to the center of the metered area.</entry>
<row>
<entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant> </entry>
<entry>A multi-zone metering. The light intensity is measured
-in several points of the frame and the the results are combined. The
+in several points of the frame and the results are combined. The
algorithm of the zones selection and their significance in calculating the
final value is device dependent.</entry>
</row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
index f4e28e7d4751..721728745407 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
@@ -267,7 +267,7 @@ is intended for still imaging applications. The idea is to get the
best possible image quality that the hardware can deliver. It is not
defined how the driver writer may achieve that; it will depend on the
hardware and the ingenuity of the driver writer. High quality mode is
-a different mode from the the regular motion video capture modes. In
+a different mode from the regular motion video capture modes. In
high quality mode:<itemizedlist>
<listitem>
<para>The driver may be able to capture higher
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
index c6ef8f13dc7e..74607b6c1117 100644
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -8,7 +8,7 @@ Properties:
"qcom,kpss-timer" - krait subsystem
"qcom,scss-timer" - scorpion subsystem
-- interrupts : Interrupts for the the debug timer, the first general purpose
+- interrupts : Interrupts for the debug timer, the first general purpose
timer, and optionally a second general purpose timer in that
order.
diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
index 93986a5a8018..3bacc8e0931e 100644
--- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
+++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -9,7 +9,7 @@ Properties:
Compatibility with many Cavium evaluation boards.
-- reg: The base address of the the CF chip select banks. Depending on
+- reg: The base address of the CF chip select banks. Depending on
the device configuration, there may be one or two banks.
- cavium,bus-width: The width of the connection to the CF devices. Valid
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index ec42935f3908..5235cbc551b0 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -9,7 +9,7 @@ Required properties:
Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width
defaults to 1 byte
-- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+- nand-skip-bbtscan: Indicates the BBT scanning should be skipped
- timings: array of 6 bytes for NAND timings. The meanings of these bytes
are:
byte 0 TCLR : CLE to RE delay in number of AHB clock cycles, only 4 bits
diff --git a/Documentation/email-clients.txt b/Documentation/email-clients.txt
index 860c29a472ad..e9f5daccbd02 100644
--- a/Documentation/email-clients.txt
+++ b/Documentation/email-clients.txt
@@ -104,7 +104,7 @@ Then from the "Message" menu item, select insert file and choose your patch.
As an added bonus you can customise the message creation toolbar menu
and put the "insert file" icon there.
-Make the the composer window wide enough so that no lines wrap. As of
+Make the composer window wide enough so that no lines wrap. As of
KMail 1.13.5 (KDE 4.5.4), KMail will apply word wrapping when sending
the email if the lines wrap in the composer window. Having word wrapping
disabled in the Options menu isn't enough. Thus, if your patch has very
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index 4c95935cbcf4..e54896427b4a 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -255,7 +255,7 @@ AUTOFS_DEV_IOCTL_OPENMOUNT and AUTOFS_DEV_IOCTL_CLOSEMOUNT
Obtain and release a file descriptor for an autofs managed mount point
path. The open call requires an initialized struct autofs_dev_ioctl with
-the the path field set and the size field adjusted appropriately as well
+the path field set and the size field adjusted appropriately as well
as the arg1 field set to the device number of the autofs mount. The
device number can be obtained from the mount options shown in
/proc/mounts. The close call requires an initialized struct
@@ -373,7 +373,7 @@ variation uses the path and optionally arg1 set to an autofs mount type.
The call returns 1 if this is a mount point and sets arg1 to the device
number of the mount and field arg2 to the relevant super block magic
number (described below) or 0 if it isn't a mountpoint. In both cases
-the the device number (as returned by new_encode_dev()) is returned
+the device number (as returned by new_encode_dev()) is returned
in field arg1.
If supplied with a file descriptor we're looking for a specific mount,
@@ -387,7 +387,7 @@ is one or 0 if it isn't a mountpoint.
If a path is supplied (and the ioctlfd field is set to -1) then the path
is looked up and is checked to see if it is the root of a mount. If a
type is also given we are looking for a particular autofs mount and if
-a match isn't found a fail is returned. If the the located path is the
+a match isn't found a fail is returned. If the located path is the
root of a mount 1 is returned along with the super magic of the mount
or 0 otherwise.
diff --git a/Documentation/futex-requeue-pi.txt b/Documentation/futex-requeue-pi.txt
index 9dc1ff4fd536..31b16610c416 100644
--- a/Documentation/futex-requeue-pi.txt
+++ b/Documentation/futex-requeue-pi.txt
@@ -67,7 +67,7 @@ pthread_cond_wait_pi(cond, mutex)
lock(cond->__data.__lock);
} while(...)
unlock(cond->__data.__lock);
- /* the kernel acquired the the mutex for us */
+ /* the kernel acquired the mutex for us */
}
pthread_cond_broadcast_pi(cond)
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index de139b18184a..7b4f59c09ee2 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -372,7 +372,7 @@ simple scheme, which is compatible with earlier usage, is:
Rationale: We have no information about the orientation of the touching
ellipse, so approximate it with an inscribed circle instead. The tool
-ellipse should align with the the vector (T - C), so the diameter must
+ellipse should align with the vector (T - C), so the diameter must
increase with distance(T, C). Finally, assume that the touch diameter is
equal to the tool thickness, and we arrive at the formulas above.
diff --git a/Documentation/io-mapping.txt b/Documentation/io-mapping.txt
index 473e43b2d588..5ca78426f54c 100644
--- a/Documentation/io-mapping.txt
+++ b/Documentation/io-mapping.txt
@@ -38,7 +38,7 @@ maps are more efficient:
void io_mapping_unmap_atomic(void *vaddr)
- 'vaddr' must be the the value returned by the last
+ 'vaddr' must be the value returned by the last
io_mapping_map_atomic_wc call. This unmaps the specified
page and allows the task to sleep once again.
diff --git a/Documentation/kmemcheck.txt b/Documentation/kmemcheck.txt
index 9398a501fdb9..a41bdebbe87b 100644
--- a/Documentation/kmemcheck.txt
+++ b/Documentation/kmemcheck.txt
@@ -541,7 +541,7 @@ initialized. This is the beginning of the struct:
92 } _sifields;
93 } siginfo_t;
-On 64-bit, the int is 4 bytes long, so it must the the union member that has
+On 64-bit, the int is 4 bytes long, so it must the union member that has
not been initialized. We can verify this using gdb:
$ gdb vmlinux
diff --git a/Documentation/networking/spider_net.txt b/Documentation/networking/spider_net.txt
index 4b4adb8eb14f..b0b75f8463b3 100644
--- a/Documentation/networking/spider_net.txt
+++ b/Documentation/networking/spider_net.txt
@@ -73,7 +73,7 @@ Thus, in an idle system, the GDACTDPA, tail and head pointers will
all be pointing at the same descr, which should be "empty". All of the
other descrs in the ring should be "empty" as well.
-The show_rx_chain() routine will print out the the locations of the
+The show_rx_chain() routine will print out the locations of the
GDACTDPA, tail and head pointers. It will also summarize the contents
of the ring, starting at the tail pointer, and listing the status
of the descrs that follow.
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index 0103e4b15b0e..603b353cb000 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -82,7 +82,7 @@ the string arguments should contain the phy name as given in the dt data and
in the case of non-dt boot, it should contain the label of the PHY.
The only difference between the two APIs is that devm_phy_get associates the
device with the PHY using devres on successful PHY get. On driver detach,
-release function is invoked on the the devres data and devres data is freed.
+release function is invoked on the devres data and devres data is freed.
5. Releasing a reference to the PHY
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index a66c9821b5ce..47d46dff70f7 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -391,7 +391,7 @@ When resuming from freeze, standby or memory sleep, the phases are:
the resume methods. This generally involves undoing the actions of the
preceding suspend_late phase.
- 3 The resume methods should bring the the device back to its operating
+ 3 The resume methods should bring the device back to its operating
state, so that it can perform normal I/O. This generally involves
undoing the actions of the suspend phase.
diff --git a/Documentation/security/Smack.txt b/Documentation/security/Smack.txt
index 7a2d30c132e3..5ea996f21d6c 100644
--- a/Documentation/security/Smack.txt
+++ b/Documentation/security/Smack.txt
@@ -3,7 +3,7 @@
"Good for you, you've decided to clean the elevator!"
- The Elevator, from Dark Star
-Smack is the the Simplified Mandatory Access Control Kernel.
+Smack is the Simplified Mandatory Access Control Kernel.
Smack is a kernel based implementation of mandatory access
control that includes simplicity in its primary design goals.
diff --git a/Documentation/static-keys.txt b/Documentation/static-keys.txt
index 9f5263d3152c..e5f46e7da54d 100644
--- a/Documentation/static-keys.txt
+++ b/Documentation/static-keys.txt
@@ -116,7 +116,7 @@ The branch(es) can then be switched via:
static_key_slow_dec(&key);
Thus, 'static_key_slow_inc()' means 'make the branch true', and
-'static_key_slow_dec()' means 'make the the branch false' with appropriate
+'static_key_slow_dec()' means 'make the branch false' with appropriate
reference counting. For example, if the key is initialized true, a
static_key_slow_dec(), will switch the branch to false. And a subsequent
static_key_slow_inc(), will change the branch back to true. Likewise, if the
diff --git a/Documentation/trace/ring-buffer-design.txt b/Documentation/trace/ring-buffer-design.txt
index 7d350b496585..ff747b6fa39b 100644
--- a/Documentation/trace/ring-buffer-design.txt
+++ b/Documentation/trace/ring-buffer-design.txt
@@ -683,7 +683,7 @@ against nested writers.
cmpxchg(tail_page, temp_page, next_page)
The above will update the tail page if it is still pointing to the expected
-page. If this fails, a nested write pushed it forward, the the current write
+page. If this fails, a nested write pushed it forward, the current write
does not need to push it.
diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt
index 4c5e37939344..1cd07c017cf6 100644
--- a/Documentation/usb/WUSB-Design-overview.txt
+++ b/Documentation/usb/WUSB-Design-overview.txt
@@ -25,7 +25,7 @@ updated content.
* Design-overview.txt-1.8
This code implements a Ultra Wide Band stack for Linux, as well as
-drivers for the the USB based UWB radio controllers defined in the
+drivers for the USB based UWB radio controllers defined in the
Wireless USB 1.0 specification (including Wireless USB host controller
and an Intel WiNET controller).
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 858aecf21db2..cb54d29a7644 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1462,7 +1462,7 @@ struct kvm_lapic_state {
char regs[KVM_APIC_REG_SIZE];
};
-Copies the input argument into the the Local APIC registers. The data format
+Copies the input argument into the Local APIC registers. The data format
and layout are the same as documented in the architecture manual.
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index a68db7692ee8..441dd2266531 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -453,7 +453,7 @@ putback_lru_page() function to add migrated pages back to the LRU.
mmap(MAP_LOCKED) SYSTEM CALL HANDLING
-------------------------------------
-In addition the the mlock()/mlockall() system calls, an application can request
+In addition to the mlock()/mlockall() system calls, an application can request
that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aa8300333bc5..5ab69c4e3d01 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1993,7 +1993,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
+ appended to the device tree bootargs property.
endchoice
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index d1c3f3a71c94..4f697edd0bad 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -22,7 +22,7 @@
#ifndef __ASSEMBLY__
-/* Unwind reason code according the the ARM EABI documents */
+/* Unwind reason code according to the ARM EABI documents */
enum unwind_reason_code {
URC_OK = 0, /* operation completed successfully */
URC_CONTINUE_UNWIND = 8,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e3f0ecaf87dd..33a14bbc4747 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -721,7 +721,7 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
}
/**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * _init_main_clk - get a struct clk * for the hwmod's main functional clk
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
@@ -759,7 +759,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
}
/**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
@@ -802,7 +802,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
}
/**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 62aea3e835f3..cd2a206a1e2c 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -423,7 +423,7 @@ static void __init imote2_stargate2_init(void)
}
#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
+/* As the imote2 doesn't currently have a conventional SD slot
* there is no option to hotplug cards, making all this rather simple
*/
static int imote2_mci_get_ro(struct device *dev)
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 86b5a095c5a1..9c8612385e00 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -480,7 +480,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
#ifdef CONFIG_EXACT_HWERR
/* Make sure all pending read/writes complete. This will ensure any
* accesses which could cause hardware errors completes, and signal
- * the the hardware before we do something silly, like crash the
+ * the hardware before we do something silly, like crash the
* kernel. We don't need to work around anomaly 05000312, since
* we are already atomic
*/
diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c
index 86318a16a252..dc21f94aaaaf 100644
--- a/arch/c6x/platforms/cache.c
+++ b/arch/c6x/platforms/cache.c
@@ -437,7 +437,7 @@ void __init c6x_cache_init(void)
if (!cache_base)
return;
- /* Set L2 caches on the the whole L2 SRAM memory */
+ /* Set L2 caches on the whole L2 SRAM memory */
L2_cache_set_mode(L2MODE_SIZE);
/* Enable L1 */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 45698cd15b7b..bd6ea40f3ef9 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -23,7 +23,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
* The pad bits in the middle are used to prevent the next_ticket number
* overflowing into the now_serving number.
*
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index 53e9dfacd073..3ea4168f28f7 100644
--- a/arch/ia64/include/asm/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -257,7 +257,7 @@ static inline int uv_numa_blade_id(void)
return 0;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return 0;
diff --git a/arch/m68k/platform/coldfire/intc-2.c b/arch/m68k/platform/coldfire/intc-2.c
index 995093357c59..f74f0e473119 100644
--- a/arch/m68k/platform/coldfire/intc-2.c
+++ b/arch/m68k/platform/coldfire/intc-2.c
@@ -7,7 +7,7 @@
* family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
* controllers, and the 547x and 548x families which have only one of them.
*
- * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * The external 7 fixed interrupts are part of the Edge Port unit of these
* ColdFire parts. They can be configured as level or edge triggered.
*
* (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff986a23..30052da1f1a4 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -211,7 +211,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
/*
* Get a pointer to where the new child's register block should have
* been pushed.
- * The Meta's stack grows upwards, and the context is the the first
+ * The Meta's stack grows upwards, and the context is the first
* thing to be pushed by TBX (phew)
*/
*childregs = *current_pt_regs();
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 0536bc021cc6..b417be09196d 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -445,7 +445,7 @@ TRAP_return: /* Make global symbol for debugging */
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look like the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index b86bff31d1d3..6363d3c93496 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -16,7 +16,7 @@
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
* is to trigger a wakeup.
*/
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index a76fe5a57a9f..a6e883501d02 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index)
* offsetof() to determine the offsets into packet headers.
* For example, offsetof(ethhdr, protocol) returns the offset
* of the ethernet protocol field. The bitmask selects which
- * bytes to include the the tag, with bit offset X selecting
+ * bytes to include in the tag, with bit offset X selecting
* byte at offset X from the beginning of the packet data.
* @len: Number of bytes to include. Usually this is the sizeof()
* the field.
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index 78d201fb6c87..b6f41f6b6c70 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -31,7 +31,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*/
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index dfc1b911be04..cfde409cf48d 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -908,7 +908,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
if ((tcstatus & TCSTATUS_IXMT) != 0) {
/*
- * If we're in the the irq-off version of the wait
+ * If we're in the irq-off version of the wait
* loop, we need to force exit from the wait and
* do a direct post of the IPI.
*/
diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c
index a7b044536de4..4074bc8fd565 100644
--- a/arch/mips/kvm/kvm_mips.c
+++ b/arch/mips/kvm/kvm_mips.c
@@ -1197,7 +1197,7 @@ int __init kvm_mips_init(void)
/* On MIPS, kernel modules are executed from "mapped space", which requires TLBs.
* The TLB handling code is statically linked with the rest of the kernel (kvm_tlb.c)
* to avoid the possibility of double faulting. The issue is that the TLB code
- * references routines that are part of the the KVM module,
+ * references routines that are part of the KVM module,
* which are only available once the module is loaded.
*/
kvm_mips_gfn_to_pfn = gfn_to_pfn;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index c8efdb5b6ee0..0e8e350a46b7 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -349,7 +349,7 @@ static void co_cache_error_call_notifiers(unsigned long val)
}
/*
- * Called when the the exception is recoverable
+ * Called when the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -358,7 +358,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
}
/**
- * Called when the the exception is not recoverable
+ * Called when the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d428e8471eec..1d1eb1e10ae2 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -144,7 +144,7 @@ void xlr_percpu_fmn_init(void)
* For sending FMN messages, we need credits on the destination
* bucket. Program the credits this core has on the 128 possible
* destination buckets.
- * We cannot use a loop here, because the the first argument has
+ * We cannot use a loop here, because the first argument has
* to be a constant integer value.
*/
COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index 86b0ac79990c..51dd1f613865 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -246,7 +246,7 @@ static inline unsigned int ev_int_get_mask(unsigned int interrupt,
* ev_int_eoi - signal the end of interrupt processing
* @interrupt: the interrupt number
*
- * This function signals the end of processing for the the specified
+ * This function signals the end of processing for the specified
* interrupt, which must be the interrupt currently in service. By
* definition, this is also the highest-priority interrupt.
*
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index eb0f4ac75c4c..091791030ee6 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -30,7 +30,7 @@ struct arch_hw_breakpoint {
u16 len; /* length of the target data symbol */
};
-/* Note: Don't change the the first 6 bits below as they are in the same order
+/* Note: Don't change the first 6 bits below as they are in the same order
* as the dabr and dabrx.
*/
#define HW_BRK_TYPE_READ 0x01
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 3d11d8038dee..534c33ee61e5 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -92,7 +92,7 @@ __secondary_hold_acknowledge:
#ifdef CONFIG_RELOCATABLE
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
- * is used by kexec-tools to keep the the kdump kernel in the
+ * is used by kexec-tools to keep the kdump kernel in the
* crash_kernel region. The loader is responsible for
* observing the alignment requirement.
*/
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index 6936547018b8..5dc886858f57 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -154,7 +154,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on powerpc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_disable();
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index d67db4bd672d..5c993db6988e 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -943,7 +943,7 @@ void flush_dcache_icache_hugepage(struct page *page)
* (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table
*
* So long as we atomically load page table pointers we are safe against teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 692998244d2c..a2ce00831362 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -9,7 +9,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * This file is a driver for the the General Purpose Timer (gpt) devices
+ * This file is a driver for the General Purpose Timer (gpt) devices
* found on the MPC5200 SoC. Each timer has an IO pin which can be used
* for GPIO or can be used to raise interrupts. The timer function can
* be used independently from the IO pin, or it can be used to control
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index c665d7de6c99..baeb4df3fb28 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -251,7 +251,7 @@ static void briq_restart(char *cmd)
* Per default, input/output-device points to the keyboard/screen
* If no card is installed, the built-in serial port is used as a fallback.
* But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
- * the the built-in serial node. Instead, a /failsafe node is created.
+ * to the built-in serial node. Instead, a /failsafe node is created.
*/
static void chrp_init_early(void)
{
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 74a5a5773b1f..f4a1db825c62 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -889,7 +889,7 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
/*
* This function is supposed to be called on basis of PE from top
- * to bottom style. So the the I/O or MMIO segment assigned to
+ * to bottom style. So the I/O or MMIO segment assigned to
* parent PE could be overrided by its child PEs if necessary.
*/
static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 639fce464008..2f03d7badf95 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -187,7 +187,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* prevent the pagetables from being freed on s390.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index bc4d3f5d2e5d..99c8c5eae63c 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -305,7 +305,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
+ * firmware can sample the value before the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index 01ee23dd724d..758cfa652209 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -190,7 +190,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on sparc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_disable();
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 71af5747874d..f7f64c80c5b2 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -116,7 +116,7 @@
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
* Likewise, INTCTRL_K is removed and re-added during device
- * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * interrupts, as is the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
* to know our current state.
diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h
index df10a662cc25..50a3d5cbad20 100644
--- a/arch/tile/include/gxio/trio.h
+++ b/arch/tile/include/gxio/trio.h
@@ -206,7 +206,7 @@ typedef struct {
/* Initialize a TRIO context.
*
* This function allocates a TRIO "service domain" and maps the MMIO
- * registers into the the caller's VA space.
+ * registers into the caller's VA space.
*
* @param trio_index Which TRIO shim; Gx36 must pass 0.
* @param context Context object to be initialized.
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index de07fa7d1315..c554ffbb50f7 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -277,7 +277,7 @@ P("\n");
/*
* Called after execve() has started the new image. This allows us
- * to reset the info state. Note that the the mmap'ed memory, if there
+ * to reset the info state. Note that the mmap'ed memory, if there
* was any, has already been unmapped by the exec.
*/
void single_step_execve(void)
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index bf156ded74b5..59213c3b0053 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -72,7 +72,7 @@ static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*
* We use an xadd covering *both* parts of the lock, to increment the tail and
* also load the position of the head, which takes care of memory ordering
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index a30836c8ac4d..d81914578c9b 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -522,7 +522,7 @@ static inline int uv_numa_blade_id(void)
return uv_hub_info->numa_blade_id;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return uv_cpu_to_blade[cpu];
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index e5ca72a5cdb6..458d8301111d 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7040,7 +7040,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
if (current->mm == kvm->mm) {
/*
* Free memory regions allocated on behalf of userspace,
- * unless the the memory map has changed due to process exit
+ * unless the memory map has changed due to process exit
* or fd copying.
*/
struct kvm_userspace_memory_region mem;
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index dd74e46828c0..d9d367e59db6 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -275,7 +275,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
@@ -347,7 +347,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_disable();
pgdp = pgd_offset(mm, addr);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 09f3059cb00b..0f7fd777aa23 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -463,7 +463,7 @@ char * __init xen_memory_setup(void)
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
- * We tried to make the the memblock_reserve more selective so
+ * We tried to make the memblock_reserve more selective so
* that it would be clear what region is reserved. Sadly we ran
* in the problem wherein on a 64-bit hypervisor with a 32-bit
* initial domain, the pt_base has the cr3 value which is not
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 722553f17db3..3c8e71ad5242 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -6,7 +6,7 @@
* For the new V3 MMU we remap the TLB from virtual == physical
* to the standard Linux mapping used in earlier MMU's.
*
- * The the MMU we also support a new configuration register that
+ * In the MMU we also support a new configuration register that
* specifies how the S32C1I instruction operates with the cache
* controller.
*
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 21dbe6bdb8ed..91615d5f1956 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
* of the proper size instead.
*
* This algorithm simply backs out the register changes started by the user
- * excpetion handler, makes it appear that we have started a window underflow
+ * exception handler, makes it appear that we have started a window underflow
* by rotating the window back and then setting the old window base (OWB) in
* the 'ps' register with the rolled back window base. The 'movsp' instruction
* will be re-executed and this time since the next window frames is in the
* active AR registers it won't cause an exception.
*
* If the WindowUnderflow code gets a TLB miss the page will get mapped
- * the the partial windeowUnderflow will be handeled in the double exception
+ * and the partial windeowUnderflow will be handeled in the double exception
* handler.
*
* Entry condition:
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 8a6c4a0d22db..90fe27f6f156 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -47,7 +47,7 @@
/*
* Common set of includes for all ACPICA source files.
* We put them here because we don't want to duplicate them
- * in the the source code again and again.
+ * in the source code again and again.
*
* Note: The order of these include files is important.
*/
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 55635edf563b..f6b702d6b69d 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -2700,7 +2700,7 @@ enum drbd_ret_code conn_new_minor(struct drbd_tconn *tconn, unsigned int minor,
}
add_disk(disk);
- kref_init(&mdev->kref); /* one ref for both idrs and the the add_disk */
+ kref_init(&mdev->kref); /* one ref for both idrs and the add_disk */
/* inherit the connection state */
mdev->state.conn = tconn->cstate;
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index 46118f845948..6834b0108663 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -559,7 +559,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
wake_up_interruptible(&apm_waitqueue);
/*
- * Wait for the the suspend_acks_pending variable to drop to
+ * Wait for the suspend_acks_pending variable to drop to
* zero, meaning everybody acked the suspend event (or the
* process was killed.)
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 02225eb19cf6..619f3a30ec55 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -111,7 +111,7 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
}
/**
- * fifo_icap_set_read_size - Set the the size register.
+ * fifo_icap_set_read_size - Set the size register.
* @drvdata: a pointer to the drvdata.
* @data: the size of the following read transaction, in words.
**/
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index 6e11701f0fca..cc27e046e2e3 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -56,7 +56,7 @@ static inline void __cpuidle_unset_driver(struct cpuidle_driver *drv)
}
/**
- * __cpuidle_set_driver - set per CPU driver variables the the given driver.
+ * __cpuidle_set_driver - set per CPU driver variables for the given driver.
* @drv: a valid pointer to a struct cpuidle_driver
*
* For each CPU in the driver's cpumask, unset the registered driver per CPU
@@ -169,7 +169,7 @@ static int __cpuidle_driver_init(struct cpuidle_driver *drv)
/*
* Look for the timer stop flag in the different states, so that we know
* if the broadcast timer has to be set up. The loop is in the reverse
- * order, because usually on of the the deeper states has this flag set.
+ * order, because usually one of the deeper states has this flag set.
*/
for (i = drv->state_count - 1; i >= 0 ; i--) {
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 888f7f4a6d3f..b5668e0f5f4f 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -53,7 +53,7 @@
#define CMD0_IRQ_THRESHOLD 1
/*
- * The timeout period (in jiffies) for a PDU. When the the number of PDUs in
+ * The timeout period (in jiffies) for a PDU. When the number of PDUs in
* flight is greater than the STAT_IRQ_THRESHOLD or 0 the timer is disabled.
* When there are packets in flight but lower than the threshold, we enable
* the timer and at expiry, attempt to remove any processed packets from the
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 1c73f4fbc252..2f2a4276a014 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -435,7 +435,7 @@ static int hash_get_device_data(struct hash_ctx *ctx,
* @keylen: The lengt of the key.
*
* Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the the hw design spec. Either due to incorrect info in the
+ * specified in the hw design spec. Either due to incorrect info in the
* spec or due to a bug in the hw.
*/
static void hash_hw_write_key(struct hash_device_data *device_data,
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 814addb62d2c..ee45a3d504f7 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -399,7 +399,7 @@ static int ichx_gpio_probe(struct platform_device *pdev)
/*
* If necessary, determine the I/O address of ACPI/power management
- * registers which are needed to read the the GPE0 register for GPI pins
+ * registers which are needed to read the GPE0 register for GPI pins
* 0 - 15 on some chipsets.
*/
if (!ichx_priv.desc->uses_gpe0)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index cdfb9da0e4ce..f4f8e8baa6cc 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2105,7 +2105,7 @@ int __i915_add_request(struct intel_ring_buffer *ring,
/* Whilst this request exists, batch_obj will be on the
* active_list, and so will hold the active reference. Only when this
- * request is retired will the the batch_obj be moved onto the
+ * request is retired will the batch_obj be moved onto the
* inactive_list and lose its active reference. Hence we do not need
* to explicitly hold another reference here.
*/
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d78d33f9337d..a33b78343d21 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2134,7 +2134,7 @@ void intel_display_handle_reset(struct drm_device *dev)
* will get its events and not get stuck.
*
* Also update the base address of all primary
- * planes to the the last fb to make sure we're
+ * planes to the last fb to make sure we're
* showing the correct fb after a reset.
*
* Need to make two loops over the crtcs so that we
@@ -8930,7 +8930,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
}
/* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
+ * update the output configuration. */
intel_modeset_update_state(dev, prepare_pipes);
if (dev_priv->display.modeset_global_resources)
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index af10f8571d87..559002e193c5 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -2779,8 +2779,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t
ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 00c0d2ba22d3..36af5f14f622 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -353,7 +353,7 @@
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 841d0e09be3e..279ce8156f88 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -321,7 +321,7 @@ void radeon_doorbell_free(struct radeon_device *rdev, u32 doorbell)
/*
* radeon_wb_*()
- * Writeback is the the method by which the the GPU updates special pages
+ * Writeback is the method by which the GPU updates special pages
* in memory with the status of certain GPU events (fences, ring pointers,
* etc.).
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index ddb8f8e04eb5..555529a2ecd9 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -45,7 +45,7 @@
* for GPU/CPU synchronization. When the fence is written,
* it is expected that all buffers associated with that fence
* are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed. Whether
+ * that the relevant GPU caches have been flushed. Whether
* we use a scratch register or memory location depends on the asic
* and whether writeback is enabled.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index b990b1a2bd50..2c0d2fbc7fdb 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -405,7 +405,7 @@ void radeon_gart_fini(struct radeon_device *rdev)
* (uncached system pages).
* Each VM has an ID associated with it and there is a page table
* associated with each VMID. When execting a command buffer,
- * the kernel tells the the ring what VMID to use for that command
+ * the kernel tells the ring what VMID to use for that command
* buffer. VMIDs are allocated dynamically as commands are submitted.
* The userspace drivers maintain their own address space and the kernel
* sets up their pages tables accordingly when they submit their
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index cea623c36ae2..cc959350da68 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -542,7 +542,7 @@ EXPORT_SYMBOL_GPL(vmbus_close);
* vmbus_sendpacket() - Send the specified buffer on the given channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @requestid: Identifier of the request
* @type: Type of packet that is being send e.g. negotiate, time
* packet etc.
@@ -717,7 +717,7 @@ EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
* vmbus_recvpacket() - Retrieve the user packet on the specified channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @buffer_actual_len: The actual size of the data after it was received
* @requestid: Identifier of the request
*
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 48aad4faea06..52bcb6c36862 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -888,7 +888,7 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the IRQ information
+ * VMBUS is an acpi enumerated device. Get the IRQ information
* from DSDT.
*/
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index 033d6aca47d3..d41d7e3bf31c 100644
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -117,7 +117,7 @@ static int ucd9200_probe(struct i2c_client *client,
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
- * for the the phases of the rail.
+ * for the phases of the rail.
*/
for (i = 0; i < info->pages; i++) {
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 28cfe97cf1e9..231b54591e2b 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -87,7 +87,7 @@
* These 3 values (SDR and DDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
+ * are also the possible values for ipath_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define IPATH_IB_SDR 1
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index 1946101419a3..1adecf0d2eb9 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -333,7 +333,7 @@ struct qib_verbs_txreq {
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for qib_link_speed_enabled and active
+ * are also the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 6b44413f54e3..59f820e6354f 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -18,7 +18,7 @@
/*
* Timer function which is run every scan_ms ms when the device is opened.
- * The dev input variable is set to the the input_dev pointer.
+ * The dev input variable is set to the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_polled_dev *dev)
{
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 59aa24002c7b..9842375c7b4e 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1017,7 +1017,7 @@ static int mxt_load_fw(struct device *dev, const char *fn)
frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
- /* We should add 2 at frame size as the the firmware data is not
+ /* We should add 2 at frame size as the firmware data is not
* included the CRC bytes.
*/
frame_size += 2;
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 114f3bcba1b0..24c15bfb2199 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1566,7 +1566,7 @@ reset_hfcsusb(struct hfcsusb *hw)
write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
((hw->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 0bf1e4edf04d..def8b3511e59 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -205,7 +205,7 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
/*:*/
/*H:030
- * Let's jump straight to the the main loop which runs the Guest.
+ * Let's jump straight to the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
* going around and around until something interesting happens.
*/
diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h
index e404b6e44802..ce0fb855c705 100644
--- a/drivers/media/dvb-frontends/tda1002x.h
+++ b/drivers/media/dvb-frontends/tda1002x.h
@@ -1,6 +1,6 @@
/*
TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index 71fb63299de7..17534ff576ca 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1134,7 +1134,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
state->pll_pfactor = 0;
}
- /* Establish any defaults the the user didn't pass */
+ /* Establish any defaults the user didn't pass */
tda10048_establish_defaults(&state->frontend);
/* Set the xtal and freq defaults */
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..1f8820f5f8c0 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -37,7 +37,7 @@
(compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
/* We calculate the baseband frequencies of the carrier and the pilot tones
- * based on the the sampling rate of the audio rds fifo. */
+ * based on the sampling rate of the audio rds fifo. */
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index 2ad65eb29832..00e0818abfc9 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -555,7 +555,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f)
reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94);
/* Okay, we've wasted time working out the correct value,
- but if we use it, it fouls the the window alignment.
+ but if we use it, it fouls the window alignment.
Fudge it to what we want... */
reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16));
reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16));
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index d37ee37aaefe..328956a52969 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -636,7 +636,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
}
/* Check that the hardware is accessible. If the status bytes are
- * 0xFF then the device is not accessible, the the IRQ belongs
+ * 0xFF then the device is not accessible, the IRQ belongs
* to another driver.
* 4 x u32 interrupt registers.
*/
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 33b9660b7f77..6ea16e20449d 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -316,7 +316,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
* vpbe_get_output - Get output
* @vpbe_dev - vpbe device ptr
*
- * return current vpbe output to the the index
+ * return current vpbe output to the index
*/
static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
{
diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index fb27ff7e1e07..0a9140ba9219 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -505,7 +505,7 @@ static int fimc_capture_open(struct file *file)
if (ret == 0 && vc->user_subdev_api && vc->inh_sensor_ctrls) {
/*
- * Recreate controls of the the video node to drop
+ * Recreate controls of the video node to drop
* any controls inherited from the sensor subdev.
*/
fimc_ctrls_delete(vc->ctx);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index df3a0ec7fd2c..cdba0d519113 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1671,7 +1671,7 @@ void omap3isp_print_status(struct isp_device *isp)
* To solve this problem power management support is split into prepare/complete
* and suspend/resume operations. The pipelines are stopped in prepare() and the
* ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
- * resume(), and the the pipelines are restarted in complete().
+ * resume(), and the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not modeled explicitly
* yet.
diff --git a/drivers/media/rc/iguanair.c b/drivers/media/rc/iguanair.c
index 19632b1c2190..d01f106d0fb7 100644
--- a/drivers/media/rc/iguanair.c
+++ b/drivers/media/rc/iguanair.c
@@ -308,7 +308,7 @@ static int iguanair_set_tx_carrier(struct rc_dev *dev, uint32_t carrier)
cycles = DIV_ROUND_CLOSEST(24000000, carrier * 2) -
ir->cycle_overhead;
- /* make up the the remainer of 4-cycle blocks */
+ /* make up the remainer of 4-cycle blocks */
switch (cycles & 3) {
case 0:
sevens = 0;
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index d56f927fc31a..b5d2e805380d 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 474a17e4db0c..4c7f8fed8046 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h
index 0f461ca10cb9..82d19dcdebc0 100644
--- a/drivers/media/usb/dvb-usb/friio.h
+++ b/drivers/media/usb/dvb-usb/friio.h
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
index 52bdb569760b..414c1b752911 100644
--- a/drivers/media/usb/gspca/finepix.c
+++ b/drivers/media/usb/gspca/finepix.c
@@ -143,7 +143,7 @@ again:
* for, then it's the end of the
* frame. Sometimes the jpeg is not complete,
* but there's nothing we can do. We also end
- * here if the the jpeg ends right at the end
+ * here if the jpeg ends right at the end
* of the frame. */
gspca_frame_add(gspca_dev, LAST_PACKET,
data, len);
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 1ccaaddaa307..e43f8629436b 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1313,7 +1313,7 @@ static int tm6000_usb_probe(struct usb_interface *interface,
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
-/* check if the the device has the iso in endpoint at the correct place */
+/* check if the device has the iso in endpoint at the correct place */
if (!dev->isoc_in.endp) {
printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
rc = -ENODEV;
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 3394c3432011..6d34f0830621 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -991,7 +991,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
}
/* Synchronize to the input stream by waiting for the FID bit to be
- * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE.
* stream->last_fid is initialized to -1, so the first isochronous
* frame will always be in sync.
*
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 04644e7b42b1..303b322756c7 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -373,7 +373,7 @@ static const struct lpddr2_addressing *get_addressing_table(
}
/*
- * Find the the right timing table from the array of timing
+ * Find the right timing table from the array of timing
* tables of the device using DDR clock frequency
*/
static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 5653e505f91f..eb9640c39bf7 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
* @target: per target private data
* @sdev: SCSI device
*
- * Update the target negotiation parameters based on the the Inquiry
+ * Update the target negotiation parameters based on the Inquiry
* data, adapter capabilities, and NVRAM settings.
**/
static void
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index b9ce60c301de..e63b854221aa 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -897,7 +897,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
- * This function sets the the operating point of the ARM.
+ * This function sets the operating point of the ARM.
*/
int db8500_prcmu_set_arm_opp(u8 opp)
{
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 913de07e577c..6482a9c4eb44 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -48,7 +48,7 @@
* kernel/user requirements.
*
* Blade percpu resources reserved for kernel use. These resources are
- * reserved whenever the the kernel context for the blade is loaded. Note
+ * reserved whenever the kernel context for the blade is loaded. Note
* that the kernel context is not guaranteed to be always available. It is
* loaded on demand & can be stolen by a user if the user demand exceeds the
* kernel demand. The kernel can always reload the kernel context but
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index b9e2000969f0..a90b40823cf2 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1594,7 +1594,7 @@ out_2:
* by xpc_notify_senders_of_disconnect_uv(), and to also get an
* error returned here will confuse them. Additionally, since
* in this case the channel is being disconnected we don't need
- * to put the the msg_slot back on the free list.
+ * to put the msg_slot back on the free list.
*/
if (cmpxchg(&msg_slot->func, func, NULL) != func) {
ret = xpSuccess;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index a9830ff8e3f3..44f70efefe43 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -965,7 +965,7 @@ static uint8_t gpmi_read_byte(struct mtd_info *mtd)
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
- * because the the operations are the same.
+ * because the operations are the same.
*/
static void block_mark_swapping(struct gpmi_nand_data *this,
void *payload, void *auxiliary)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 8ea6297a208f..86cabd9cc166 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -253,7 +253,7 @@ struct ubi_fm_pool {
/**
* struct ubi_volume - UBI volume description data structure.
- * @dev: device object to make use of the the Linux device model
+ * @dev: device object to make use of the Linux device model
* @cdev: character device object to create character device
* @ubi: reference to the UBI device description object
* @vol_id: volume ID
@@ -381,7 +381,7 @@ struct ubi_debug_info {
/**
* struct ubi_device - UBI device description structure
- * @dev: UBI device object to use the the Linux device model
+ * @dev: UBI device object to use for the Linux device model
* @cdev: character device object to create character device
* @ubi_num: UBI device number
* @ubi_name: UBI device name
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index c95bfb183c62..5f021c43bef6 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -726,7 +726,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
/**
* sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
- * @e: the the physical eraseblock to erase
+ * @e: the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
*
* This function returns zero in case of success and a negative error code in
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index 48f52882a22b..9d38b63a55ee 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1235,7 +1235,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
* @budget : maximum number of packets that the current CPU can receive from
* all interfaces.
* Description :
- * This function implements the the reception process.
+ * This function implements the reception process.
* Also it runs the TX completion thread
*/
static int xgmac_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 4cbb2f9850be..065da7406d4c 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -2467,7 +2467,7 @@ int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox,
* @data: len bytes to hold the data read
* @len: amount of data to read from window. Must be <=
* MEMWIN0_APERATURE after adjusting for 16B for T4 and
- * 128B for T5 alignment requirements of the the memory window.
+ * 128B for T5 alignment requirements of the memory window.
*
* Read len bytes of data from MC starting at @addr.
*/
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 53ed58b492c8..257b86e6b95b 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2142,7 +2142,7 @@ static irqreturn_t be_intx(int irq, void *dev)
}
be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- /* Return IRQ_HANDLED only for the the first spurious intr
+ /* Return IRQ_HANDLED only for the first spurious intr
* after a valid intr to stop the kernel from branding
* this irq as a bad one!
*/
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 2879b9631e15..0c988a290767 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -4068,7 +4068,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
* @hw: Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*/
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 42f0f6717511..6cb1e4eb591c 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3536,7 +3536,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
* @hw: pointer to the HW structure
*
* ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
- * register, so the the bus width is hard coded.
+ * register, so the bus width is hard coded.
**/
static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 47c2d10df826..71aca7caadf9 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2083,7 +2083,7 @@ out:
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 0ade0cd5ef53..30ed0a7811ad 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -224,7 +224,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
struct pci_dev *pdev;
- /* determine whether to use the the parent device
+ /* determine whether to use the parent device
*/
if (ixgbe_pcie_from_parent(&adapter->hw))
pdev = adapter->pdev->bus->parent->self;
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 51b00941302c..bc93418ecabc 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2167,7 +2167,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
/*
* In PCI 33 mode, the P_PLL is not used, and therefore,
- * the the P_PLL_LOCK bit in the adapter_status register will
+ * the P_PLL_LOCK bit in the adapter_status register will
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 64b4639f43b6..39fe59db9e60 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -83,7 +83,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* returns: 0 on success, -ETIMEDOUT on a timeout
*
* Writes the value to the requested register by first writing the value
- * into MWD register. The the MCR register is then appropriately setup
+ * into MWD register. The MCR register is then appropriately setup
* to finish the write operation.
*/
static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 79c6505b5c20..d7732044a4e9 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -250,14 +250,14 @@ struct i2400m_barker_db;
*
* @bus_setup: [optional fill] Function called by the bus-generic code
* [i2400m_setup()] to setup the basic bus-specific communications
- * to the the device needed to load firmware. See LIFE CYCLE above.
+ * to the device needed to load firmware. See LIFE CYCLE above.
*
* NOTE: Doesn't need to upload the firmware, as that is taken
* care of by the bus-generic code.
*
* @bus_release: [optional fill] Function called by the bus-generic
* code [i2400m_release()] to shutdown the basic bus-specific
- * communications to the the device needed to load firmware. See
+ * communications to the device needed to load firmware. See
* LIFE CYCLE above.
*
* This function does not need to reset the device, just tear down
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 0b602951ff6b..4466ee71d1e4 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -693,7 +693,7 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq,
* right spot where to insert the packet; we know the queue is
* not empty, so we are not the first ones; we also know we
* are not going to be the last ones. The list is sorted, so
- * we have to insert before the the first guy with an nsn_itr
+ * we have to insert before the first guy with an nsn_itr
* greater that our nsn. */
skb_queue_walk(&roq->queue, skb_itr) {
roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb;
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index f20886ade1cc..1f7b2b922fae 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -233,7 +233,7 @@
* i2400m_tx_skip_tail() Marks unusable FIFO tail space
* i2400m->bus_tx_kick()
*
- * Now i2400m->bus_tx_kick() is the the bus-specific driver backend
+ * Now i2400m->bus_tx_kick() is the bus-specific driver backend
* implementation; that would do:
*
* i2400m->bus_tx_kick()
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index bfec6c8f2ecb..e43a5a81955f 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -77,7 +77,7 @@ struct rx_attention {
* first_msdu is set.
*
* peer_idx_invalid
- * Indicates no matching entries within the the max search
+ * Indicates no matching entries within the max search
* count. Only set when first_msdu is set.
*
* peer_idx_timeout
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index 61f6b21fb0ae..cb15404bea71 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -98,7 +98,7 @@ struct bus_request {
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- * implemented using the asynchronous mode allowing the the bus
+ * implemented using the asynchronous mode allowing the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 7126bdd4236c..f3827982d51b 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1176,7 +1176,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
* Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
+ * response is available in the FIFO
*
* CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index 1fc1fa955d44..700e308008f2 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -638,7 +638,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN,
AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT);
- /* on AR92xx, the highest bit of count will make the the chip send
+ /* on AR92xx, the highest bit of count will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index e897648d3233..c973a79353af 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1615,7 +1615,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
- /* on AR93xx and newer, count = 0 will make the the chip send
+ /* on AR93xx and newer, count = 0 will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 4608e0eb1493..e34b1849299b 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3819,7 +3819,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
}
/*
- * Suspend the the MAC and update the slot timing
+ * Suspend the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index d606197bde8f..c03e73f835b8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -194,7 +194,7 @@ enum iwl_tx_flags {
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
+ * @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @key: security key
* @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
@@ -545,7 +545,7 @@ struct iwl_beacon_notif {
/**
* enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
+ * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
index a8652ddd6bed..89061e08c409 100644
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
@@ -65,7 +65,7 @@
#include "fw-api.h"
#include "mvm.h"
-/* Maps the driver specific channel width definition to the the fw values */
+/* Maps the driver specific channel width definition to the fw values */
static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
{
switch (chandef->width) {
@@ -86,7 +86,7 @@ static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
/*
* Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
+ * freq) definitions to the fw values
*/
static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 7d4c70f859e3..95fc2ccf1e26 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1735,7 +1735,7 @@ static void of_alias_add(struct alias_prop *ap, struct device_node *np,
* of_alias_scan - Scan all properties of 'aliases' node
*
* The function scans all the properties of 'aliases' node and populate
- * the the global lookup table with the properties. It returns the
+ * the global lookup table with the properties. It returns the
* number of alias_prop found, or error code in error case.
*
* @dt_alloc: An allocator that provides a virtual address to memory
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 1ea75236a15f..5445e678f53e 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -36,7 +36,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#include <linux/init.h>
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
index 7dfef3ee5b53..40511e39cea5 100644
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ b/drivers/pcmcia/pxa2xx_hx4700.c
@@ -33,7 +33,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/*
* IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
* The asic3 default IRQ type is level trigger low level detect, exactly
- * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+ * the signal present on GPIOD4_CF_nCD when a CF card is inserted.
* If the IRQ type is not changed, the asic3 interrupt handler will loop
* repeatedly because it is unable to clear the level trigger interrupt.
*/
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 44420d1e9094..aa6d52ef8f3f 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -294,8 +294,9 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
ret = power_supply_show_property(dev, attr, prop_buf);
if (ret == -ENODEV || ret == -ENODATA) {
- /* When a battery is absent, we expect -ENODEV. Don't abort;
- send the uevent with at least the the PRESENT=0 property */
+ /* When a battery is absent, we expect -ENODEV.
+ * Don't abort; send the uevent with at least
+ * the PRESENT=0 property */
ret = 0;
continue;
}
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index ccf54f06396b..2108302cc965 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -122,7 +122,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
- * configurations, so we use the the first method there, stripping off
+ * configurations, so we use the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index d7b66a28fe75..a972efcd1590 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3374,7 +3374,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 2035b0d64351..e62a7346428a 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1983,7 +1983,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
/*
* Device's PID has changed. We need to cleanup
* and re-login. If there is another device with
- * the the newly discovered pid, send an scn notice
+ * the newly discovered pid, send an scn notice
* so that its new pid can be discovered.
*/
list_for_each(qe, &rport->port->rport_q) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 07453bbf05e7..b02b9e5c773d 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -509,7 +509,7 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
* @skb: The receive skb
* @netdev: The associated net device
* @ptype: The packet_type structure which was used to register this handler
- * @orig_dev: The original net_device the the skb was received on.
+ * @orig_dev: The original net_device that the skb was received on.
* (in case dev is a bond)
*
* Returns: 0 for success
@@ -2709,7 +2709,7 @@ module_exit(fcoe_exit);
* fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
* @seq: active sequence in the FLOGI or FDISC exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
@@ -2738,7 +2738,7 @@ done:
* fcoe_logo_resp() - FCoE specific LOGO response handler
* @seq: active sequence in the LOGO exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 203415e02518..3bd4e86c9257 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -193,7 +193,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new)
* that doesn't have a priv (fcf was deleted). However,
* libfcoe will always delete FCFs before trying to add
* them. This is ensured because both recv_adv and
- * age_fcfs are protected by the the fcoe_ctlr's mutex.
+ * age_fcfs are protected by the fcoe_ctlr's mutex.
* This means that we should never get a FCF with a
* non-NULL priv pointer.
*/
@@ -655,7 +655,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
*
* The caller must check that the length is a multiple of 4.
* The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
- * The the skb must also be an fc_frame.
+ * The skb must also be an fc_frame.
*
* This is called from the lower-level driver with spinlocks held,
* so we must not take a mutex here.
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 4911310a38f5..cc2b2c0d22eb 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -244,7 +244,7 @@ enum sci_controller_states {
SCIC_INITIALIZED,
/**
- * This state indicates the the controller is in the process of becoming
+ * This state indicates that the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 47a013fffae7..07af745220eb 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete(
* permitted. This state is entered from the INITIAL state. This state
* is entered from the STOPPING state.
*
- * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * @SCI_DEV_STARTING: This state indicates that the remote device is in
* the process of becoming ready (i.e. starting). In this state no new
* IO operations are permitted. This state is entered from the STOPPED
* state.
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
index c7ee81d01125..f22950b12b8b 100644
--- a/drivers/scsi/isci/remote_node_context.h
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state {
/**
* struct sci_remote_node_context - This structure contains the data
* associated with the remote node context object. The remote node context
- * (RNC) object models the the remote device information necessary to manage
+ * (RNC) object models the remote device information necessary to manage
* the silicon RNC.
*/
struct sci_remote_node_context {
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 0d30ca849e8f..63da523e73a6 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -67,7 +67,7 @@
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
-* @ihost: host on which the the request was queued
+* @ihost: host on which the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 00656fc92b93..5da6568e2e50 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1654,7 +1654,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -1687,7 +1687,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -1820,7 +1820,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -1852,7 +1852,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 110445f0c58d..1ced9822c051 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5783,7 +5783,7 @@ reject_out:
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful, the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 7801601aa5d9..396ac68ca269 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2014,7 +2014,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so that the round robin selection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
@@ -5701,7 +5701,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
}
/* This routine decrements the reference count for a ndlp structure. If the
- * count goes to 0, this indicates the the associated nodelist should be
+ * count goes to 0, this indicates that the associated nodelist should be
* freed. Returning 1 indicates the ndlp resource has been released; on the
* other hand, returning 0 indicates the ndlp resource has not been released
* yet.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 647f5bfb3bd3..d5d3d6c871fd 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3783,7 +3783,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelevant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 1f292e29d566..d9a9ddbf1771 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2265,7 +2265,7 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * that the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 612f48973ff2..2a400cc3022a 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -16180,7 +16180,7 @@ out:
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 4a2195752198..90cc9b48df53 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3204,7 +3204,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when HBA driver received the identify done event or initiate FIS received
* event(for SATA), it will invoke this function to notify the sas layer that
- * the sas toplogy has formed, please discover the the whole sas domain,
+ * the sas toplogy has formed, please discover the whole sas domain,
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 0ee53c25ba58..d79aab1ce733 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -353,7 +353,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
{
/*
* On all 4xx PPC's the SPI bus is shared/multiplexed with
- * the 2nd I2C bus. We need to enable the the SPI bus before
+ * the 2nd I2C bus. We need to enable the SPI bus before
* using it.
*/
diff --git a/drivers/staging/android/binder.h b/drivers/staging/android/binder.h
index cbe345168067..98161a5f0f1a 100644
--- a/drivers/staging/android/binder.h
+++ b/drivers/staging/android/binder.h
@@ -246,7 +246,7 @@ enum binder_driver_return_protocol {
BR_FAILED_REPLY = _IO('r', 17),
/*
- * The the last transaction (either a bcTRANSACTION or
+ * The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
};
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index d9446c47bf2e..8ccb7f41c84e 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -1239,7 +1239,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
/* Initialize the Space Available Register */
writel(0, &rxmac->space_avail);
- /* Initialize the the mif_ctrl register
+ /* Initialize the mif_ctrl register
* bit 3: Receive code error. One or more nibbles were signaled as
* errors during the reception of the packet. Clear this
* bit in Gigabit, set it in 100Mbit. This was derived
diff --git a/drivers/staging/lustre/lustre/llite/file.c b/drivers/staging/lustre/lustre/llite/file.c
index fb85a58db058..7540b8e912ca 100644
--- a/drivers/staging/lustre/lustre/llite/file.c
+++ b/drivers/staging/lustre/lustre/llite/file.c
@@ -318,7 +318,7 @@ int ll_file_release(struct inode *inode, struct file *file)
fd = LUSTRE_FPRIVATE(file);
LASSERT(fd != NULL);
- /* The last ref on @file, maybe not the the owner pid of statahead.
+ /* The last ref on @file, maybe not the owner pid of statahead.
* Different processes can open the same dir, "ll_opendir_key" means:
* it is me that should stop the statahead thread. */
if (S_ISDIR(inode->i_mode) && lli->lli_opendir_key == fd &&
diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
index 5dec771d70ee..77c2c6617fbf 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
@@ -507,7 +507,7 @@ struct timeout_item* ptlrpc_new_timeout(int time, enum timeout_event event,
}
/**
- * Register timeout event on the the pinger thread.
+ * Register timeout event on the pinger thread.
* Note: the timeout list is an sorted list with increased timeout value.
*/
static struct timeout_item*
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
index 304579096562..a8bbd7fb26f2 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
@@ -216,7 +216,7 @@ ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
{
struct ieee80211_hdr_4addr *hdr;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
/* On the struct stats definition there is written that
@@ -485,7 +485,7 @@ int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
struct ieee80211_crypt_data *crypt = NULL;
int keyidx = 0;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index f45f4eddb741..45532e09c348 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -968,7 +968,7 @@ _func_enter_;
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the connection. */
+ /* If the driver wants to use the bssid to create the connection. */
/* If not, we have to copy the connecting AP's MAC address to it so that */
/* the driver just has the bssid information for PMKIDList searching. */
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index e730ed64c0fe..5981ef17a520 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -926,7 +926,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
int i;
struct ieee80211_rxb *rxb = NULL;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.c b/drivers/staging/rtl8712/rtl871x_cmd.c
index 7e324315e6ad..e36d10182e93 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -536,7 +536,7 @@ u8 r8712_joinbss_cmd(struct _adapter *padapter, struct wlan_network *pnetwork)
memcpy(&psecuritypriv->authenticator_ie[1],
&psecnetwork->IEs[12], (256-1));
psecnetwork->IELength = 0;
- /* If the the driver wants to use the bssid to create the connection.
+ /* If the driver wants to use the bssid to create the connection.
* If not, we copy the connecting AP's MAC address to it so that
* the driver just has the bssid information for PMKIDList searching.
*/
diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
index 1e80a4013b8c..41bbfca3c7ff 100644
--- a/drivers/staging/sep/sep_main.c
+++ b/drivers/staging/sep/sep_main.c
@@ -1207,7 +1207,7 @@ static int sep_lock_user_pages(struct sep_device *sep,
int error = 0;
u32 count;
int result;
- /* The the page of the end address of the user space buffer */
+ /* The page of the end address of the user space buffer */
u32 end_page;
/* The page of the start address of the user space buffer */
u32 start_page;
@@ -1406,7 +1406,7 @@ static int sep_lli_table_secure_dma(struct sep_device *sep,
{
int error = 0;
u32 count;
- /* The the page of the end address of the user space buffer */
+ /* The page of the end address of the user space buffer */
u32 end_page;
/* The page of the start address of the user space buffer */
u32 start_page;
@@ -1725,7 +1725,7 @@ static void *sep_shared_area_bus_to_virt(struct sep_device *sep,
* @num_table_entries: number of entries
* @table_data_size: total data size
*
- * Walk the the list of the print created tables and print all the data
+ * Walk the list of the print created tables and print all the data
*/
static void sep_debug_print_lli_tables(struct sep_device *sep,
struct sep_lli_entry *lli_table_ptr,
diff --git a/drivers/staging/tidspbridge/include/dspbridge/drv.h b/drivers/staging/tidspbridge/include/dspbridge/drv.h
index b0c7708321b2..ee44aaea6dee 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/drv.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/drv.h
@@ -253,7 +253,7 @@ extern int drv_get_dev_object(u32 index,
/*
* ======== drv_get_next_dev_object ========
* Purpose:
- * Returns the Ptr to the Next Device Object from the the List
+ * Returns the Ptr to the Next Device Object from the List
* Parameters:
* hdev_obj: Handle to the Device Object
* Requires:
@@ -269,7 +269,7 @@ extern u32 drv_get_next_dev_object(u32 hdev_obj);
/*
* ======== drv_get_next_dev_extension ========
* Purpose:
- * Returns the Ptr to the Next Device Extension from the the List
+ * Returns the Ptr to the Next Device Extension from the List
* Parameters:
* dev_extension: Handle to the Device Extension
* Requires:
diff --git a/drivers/staging/tidspbridge/pmgr/dev.c b/drivers/staging/tidspbridge/pmgr/dev.c
index 6234ffb5e8a3..408bb6ba571a 100644
--- a/drivers/staging/tidspbridge/pmgr/dev.c
+++ b/drivers/staging/tidspbridge/pmgr/dev.c
@@ -897,7 +897,7 @@ int dev_get_dev_type(struct dev_object *dev_obj, u8 *dev_type)
*
* 1. All Bridge function pointers which are NULL; and
* 2. All function slots in the struct dev_object structure which have no
- * corresponding slots in the the Bridge's interface, because the Bridge
+ * corresponding slots in the Bridge's interface, because the Bridge
* is of an *older* version.
* Parameters:
* intf_fxns: Interface fxn Structure of the Bridge's Dev Object.
diff --git a/drivers/staging/wlags49_h2/README.wlags49 b/drivers/staging/wlags49_h2/README.wlags49
index f65acd6f5f54..368a22b32f23 100644
--- a/drivers/staging/wlags49_h2/README.wlags49
+++ b/drivers/staging/wlags49_h2/README.wlags49
@@ -396,7 +396,7 @@ Version 7.22 abg - July 28, 2004
TxKey=1
this configures eth1 to associate to the ESSID 'some_network' with
- encryption on, where the the first encryption key is 'net01' and the key to
+ encryption on, where the first encryption key is 'net01' and the key to
use for encryption is Key 1.
Note that this only works on Agere hardware which uses this driver. For
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 47244102281e..e7e76a02e655 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -331,7 +331,7 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
} else {
/*
* Extact the RELATIVE TARGET PORT IDENTIFIER to identify
- * the Target Port in question for the the incoming
+ * the Target Port in question for the incoming
* SET_TARGET_PORT_GROUPS op.
*/
rtpi = get_unaligned_be16(ptr + 2);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 1e2f3f495843..abb15e2e90d1 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1809,7 +1809,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
- * RExit to a disconnect state). If so, let the the driver know it's
+ * RExit to a disconnect state). If so, let the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED(temp) &&
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 558605d646f3..b69b3370c415 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -263,7 +263,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
* Cypress app note that describes this mechanism
- * states the the low-speed part can't handle more
+ * states that the low-speed part can't handle more
* than 800 bytes/sec, in which case 4800 baud is the
* safest speed for a part like that.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 84657e07dc5d..a107e372fb8b 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -432,7 +432,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
}
/*
- * This is the the common top part of all parallel port callback operations that
+ * This is the common top part of all parallel port callback operations that
* send synchronous messages to the device. This implements convoluted locking
* that avoids two scenarios: (1) a port operation is called after usbserial
* has called our release function, at which point struct mos7715_parport has
@@ -471,7 +471,7 @@ static int parport_prologue(struct parport *pp)
}
/*
- * This is the the common bottom part of all parallel port functions that send
+ * This is the common bottom part of all parallel port functions that send
* synchronous messages to the device.
*/
static inline void parport_epilogue(struct parport *pp)
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index e538b72c4e3a..86ca8f88373d 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -46,7 +46,7 @@
*
* ASSUMPTIONS:
*
- * - We use the the as device address the port number where it is
+ * - We use as device address the port number where it is
* connected (port 0 doesn't exist). For unauth, it is 128 + that.
*
* ROADMAP:
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
index b7d4f6b75eef..caa4cb40334d 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/uwb/drp-ie.c
@@ -262,7 +262,7 @@ int uwb_drp_ie_update(struct uwb_rsv *rsv)
* We are given a zone id and the MAS bitmap of bits that need to be set in
* this zone. Note that this zone may already have bits set and this only
* adds settings - we cannot simply assign the MAS bitmap contents to the
- * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * zone contents. We iterate over the bits (MAS) in the zone and set the
* bits that are set in the given MAS bitmap.
*/
static
diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
index d4e7684e7045..501bc08dc125 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/omap/sossi.c
@@ -370,7 +370,7 @@ static void sossi_set_bits_per_cycle(int bpc)
int bus_pick_count, bus_pick_width;
/*
- * We set explicitly the the bus_pick_count as well, although
+ * We set explicitly the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
diff --git a/drivers/video/sis/sis_accel.c b/drivers/video/sis/sis_accel.c
index ceb434c95c0d..9177b8056356 100644
--- a/drivers/video/sis/sis_accel.c
+++ b/drivers/video/sis/sis_accel.c
@@ -215,7 +215,7 @@ SiS310SubsequentScreenToScreenCopy(struct sis_video_info *ivideo, int src_x, int
* and destination blitting areas overlap and
* adapt the bitmap addresses synchronously
* if the coordinates exceed the valid range.
- * The the areas do not overlap, we do our
+ * If the areas do not overlap, we do our
* normal check.
*/
if((mymax - mymin) < height) {
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 0f00da329e71..6a646a0b3699 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -492,7 +492,7 @@ static int autofs_dev_ioctl_askumount(struct file *fp,
* located path is the root of a mount we return 1 along with
* the super magic of the mount or 0 otherwise.
*
- * In both cases the the device number (as returned by
+ * In both cases the device number (as returned by
* new_encode_dev()) is also returned.
*/
static int autofs_dev_ioctl_ismountpoint(struct file *fp,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index 9efb94e95858..ac2ddd8741d8 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -807,7 +807,7 @@ int btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace)
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
- * not called and the the filesystem is remounted
+ * not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancelation is wanted.
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index e46e0ed74925..1e01f31a5744 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -2812,7 +2812,7 @@ verbose_printk("btrfs: process_recorded_refs %llu\n", sctx->cur_ino);
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
- * the the current inum. To handle this case, we create the
+ * than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 79f057c0619a..4f8e0287bac9 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2565,7 +2565,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
mutex_unlock(&log_root_tree->log_mutex);
/*
- * nobody else is going to jump in and write the the ctree
+ * nobody else is going to jump in and write the ctree
* super here because the log_commit atomic below is protecting
* us. We must be called with a transaction handle pinning
* the running transaction open, so a full commit can't hop
diff --git a/fs/dcache.c b/fs/dcache.c
index ae6ebb88ceff..14505f47aeba 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1978,8 +1978,8 @@ EXPORT_SYMBOL(d_splice_alias);
* same inode, only the actual correct case is stored in the dcache for
* case-insensitive filesystems.
*
- * For a case-insensitive lookup match and if the the case-exact dentry
- * already exists in in the dcache, use it and return it.
+ * For a case-insensitive lookup match and if the case-exact dentry
+ * already exists in the dcache, use it and return it.
*
* If no entry exists with the exact case name, allocate new dentry with
* the exact case, and return the spliced entry.
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 4725a07f003c..bcdfbc7568d7 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -900,7 +900,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack {
* @filename: This function kmalloc's the memory for the filename
* @filename_size: This function sets this to the amount of memory
* kmalloc'd for the filename
- * @packet_size: This function sets this to the the number of octets
+ * @packet_size: This function sets this to the number of octets
* in the packet parsed
* @mount_crypt_stat: The mount-wide cryptographic context
* @data: The memory location containing the start of the tag 70
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index d9a17d0b124d..c9c6f2e5a0a0 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -51,7 +51,7 @@ struct ext2_block_alloc_info {
/*
* Was i_next_alloc_goal in ext2_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it is the physical block number of the block which was most-recently
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index d9ecbf1113a7..1ff32c5ff892 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -276,7 +276,7 @@ static int ext4_create_inline_data(handle_t *handle,
len = 0;
}
- /* Insert the the xttr entry. */
+ /* Insert the xttr entry. */
i.value = value;
i.value_len = len;
@@ -832,7 +832,7 @@ out:
/*
* Prepare the write for the inline data.
- * If the the data can be written into the inode, we just read
+ * If the data can be written into the inode, we just read
* the page and make it uptodate, and start the journal.
* Otherwise read the page, makes it dirty so that it can be
* handle in writepages(the i_disksize update is left to the
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index bdd10eab8c40..8926ba80ad10 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -153,7 +153,7 @@ struct seg_entry {
unsigned short valid_blocks; /* # of valid blocks */
unsigned char *cur_valid_map; /* validity bitmap of blocks */
/*
- * # of valid blocks and the validity bitmap stored in the the last
+ * # of valid blocks and the validity bitmap stored in the last
* checkpoint pack. This information is used by the SSR mode.
*/
unsigned short ckpt_valid_blocks;
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index cd5496b7a0a3..dd27d2b14f60 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -690,7 +690,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb,
/*
* Under certain conditions, the window slide code
* might have reduced the number of bits available or
- * disabled the the local alloc entirely. Re-check
+ * disabled the local alloc entirely. Re-check
* here and return -ENOSPC if necessary.
*/
status = -ENOSPC;
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 79b5da2acbe1..7fca24958bb8 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -267,7 +267,7 @@ static int flush_write_buffer(struct sysfs_open_file *of, char *buf, loff_t off,
* There is no easy way for us to know if userspace is only doing a partial
* write, so we don't support them. We expect the entire buffer to come on
* the first write. Hint: if you're writing a value, first read the file,
- * modify only the the value you're changing, then write entire buffer
+ * modify only the value you're changing, then write entire buffer
* back.
*/
static ssize_t sysfs_write_file(struct file *file, const char __user *user_buf,
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index 066df425c14f..123079644c84 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -71,7 +71,7 @@ xfs_fs_encode_fh(
fileid_type = FILEID_INO32_GEN_PARENT;
/*
- * If the the filesystem may contain 64bit inode numbers, we need
+ * If the filesystem may contain 64bit inode numbers, we need
* to use larger file handles that can represent them.
*
* While we only allocate inodes that do not fit into 32 bits any
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index d1286297567b..1f6d6c3e195c 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -120,7 +120,7 @@ static inline int drm_rect_height(const struct drm_rect *r)
}
/**
- * drm_rect_visible - determine if the the rectangle is visible
+ * drm_rect_visible - determine if the rectangle is visible
* @r: rectangle whose visibility is returned
*
* RETURNS:
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 81443d557a2e..8c2cf55317db 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -179,7 +179,7 @@ extern pgprot_t protection_map[16];
#define FAULT_FLAG_USER 0x80 /* The fault originated in userspace */
/*
- * vm_fault is filled by the the pagefault handler and passed to the vma's
+ * vm_fault is filled by the pagefault handler and passed to the vma's
* ->fault function. The vma's ->fault is responsible for returning a bitmask
* of VM_FAULT_xxx flags that give details about how the fault was handled.
*
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index c3eb102a9cc8..cf956c945ced 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -94,7 +94,7 @@ struct kparam_array
* ".") the kernel commandline parameter. Note that - is changed to _, so
* the user can use "foo-bar=1" even for variable "foo_bar".
*
- * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * @perm is 0 if the variable is not to appear in sysfs, or 0444
* for world-readable, 0644 for root-writable, etc. Note that if it
* is writable, you may need to use kparam_block_sysfs_write() around
* accesses (esp. charp, which can be kfreed when it changes).
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index c2d89335f637..0e0c4ff1d2a3 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2511,7 +2511,7 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
* must call this function to return the skb back to the stack, with
* or without a timestamp.
*
- * @skb: clone of the the original outgoing packet
+ * @skb: clone of the original outgoing packet
* @hwtstamps: hardware time stamps, may be NULL if not available
*
*/
diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h
index 94e5ed64dc6d..e9a8d524ab06 100644
--- a/include/net/caif/caif_layer.h
+++ b/include/net/caif/caif_layer.h
@@ -184,7 +184,7 @@ struct cflayer {
* CAIF packet downwards in the stack.
* Packet handling rules:
* - The CAIF packet (cfpkt) ownership is passed to the
- * transmit function. This means that the the packet
+ * transmit function. This means that the packet
* cannot be accessed after passing it to the below
* layer using dn->transmit().
*
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 5e661a979694..8105b5d7f0ba 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -100,7 +100,7 @@ struct rt6_info {
struct in6_addr rt6i_gateway;
/* Multipath routes:
- * siblings is a list of rt6_info that have the the same metric/weight,
+ * siblings is a list of rt6_info that have the same metric/weight,
* destination, but not the same gateway. nsiblings is just a cache
* to speed up lookup.
*/
diff --git a/include/net/wimax.h b/include/net/wimax.h
index bbb74f990cab..e1f28cc88c1d 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -43,7 +43,7 @@
*
* USAGE
*
- * Embed a `struct wimax_dev` at the beginning of the the device's
+ * Embed a `struct wimax_dev` at the beginning of the device's
* private structure, initialize and register it. For details, see
* `struct wimax_dev`s documentation.
*
diff --git a/init/main.c b/init/main.c
index 379090fadac9..85d7cb232f1e 100644
--- a/init/main.c
+++ b/init/main.c
@@ -485,7 +485,7 @@ asmlinkage void __init start_kernel(void)
debug_objects_early_init();
/*
- * Set up the the initial canary ASAP:
+ * Set up the initial canary ASAP:
*/
boot_init_stack_canary();
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 297a9247a3b3..3cf4a90e270a 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -17,7 +17,7 @@
#ifdef HAVE_JUMP_LABEL
-/* mutex to protect coming/going of the the jump_label table */
+/* mutex to protect coming/going of the jump_label table */
static DEFINE_MUTEX(jump_label_mutex);
void jump_label_lock(void)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index b4e8500afdb3..722b5a1088f6 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2721,7 +2721,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
- * with as many of the the *youngest* kmsg records that fit into it.
+ * with as many of the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
diff --git a/kernel/smp.c b/kernel/smp.c
index f5768b0c816a..4fdf1da8d939 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -607,7 +607,7 @@ EXPORT_SYMBOL(on_each_cpu_mask);
* for all the required CPUs to finish. This may include the local
* processor.
* @cond_func: A callback function that is passed a cpu id and
- * the the info parameter. The function is called
+ * the info parameter. The function is called
* with preemption disabled. The function should
* return a blooean value indicating whether to IPI
* the specified CPU.
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index cc2f66f68dc5..04fb64169be9 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2874,7 +2874,7 @@ rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
* This function lets the user discard an event in the ring buffer
* and then that event will not be read later.
*
- * This function only works if it is called before the the item has been
+ * This function only works if it is called before the item has been
* committed. It will try to free the event from the ring buffer
* if another event has not been added behind it.
*
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 06f7e4fe8d2d..8fa2ad3b2a21 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -882,7 +882,7 @@ EXPORT_SYMBOL(bitmap_bitremap);
* read it, you're overqualified for your current job.)
*
* In other words, @orig is mapped onto (surjectively) @dst,
- * using the the map { <n, m> | the n-th bit of @relmap is the
+ * using the map { <n, m> | the n-th bit of @relmap is the
* m-th set bit of @relmap }.
*
* Any set bits in @orig above bit number W, where W is the
diff --git a/lib/dynamic_queue_limits.c b/lib/dynamic_queue_limits.c
index 0777c5a45fa0..2ad6fc394f07 100644
--- a/lib/dynamic_queue_limits.c
+++ b/lib/dynamic_queue_limits.c
@@ -60,7 +60,7 @@ void dql_completed(struct dql *dql, unsigned int count)
* the whole interval (the check above).
*
* If there is slack, the amount of execess data queued above
- * the the amount needed to prevent starvation, the queue limit
+ * the amount needed to prevent starvation, the queue limit
* can be decreased. To avoid hysteresis we consider the
* minimum amount of slack found over several iterations of the
* completion routine.
diff --git a/lib/earlycpio.c b/lib/earlycpio.c
index 3eb3e4722b8e..9d4da0a6a6ed 100644
--- a/lib/earlycpio.c
+++ b/lib/earlycpio.c
@@ -50,7 +50,7 @@ enum cpio_fields {
/**
* cpio_data find_cpio_data - Search for files in an uncompressed cpio
* @path: The directory to search for, including a slash at the end
- * @data: Pointer to the the cpio archive or a header inside
+ * @data: Pointer to the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @nextoff: When a matching file is found, this is the offset from the
* beginning of the cpio to the beginning of the next file, not the
diff --git a/lib/syscall.c b/lib/syscall.c
index 58710eefeac8..90fc637eff76 100644
--- a/lib/syscall.c
+++ b/lib/syscall.c
@@ -31,7 +31,7 @@ static int collect_syscall(struct task_struct *target, long *callno,
* @pc: filled with user PC
*
* If @target is blocked in a system call, returns zero with *@callno
- * set to the the call's number and @args filled in with its arguments.
+ * set to the call's number and @args filled in with its arguments.
* Registers not used for system call arguments may not be available and
* it is not kosher to use &struct user_regset calls while the system
* call is still in progress. Note we may get this result if @target
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 0b7656e804d1..4120a0d3852a 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1154,7 +1154,7 @@ static void return_unused_surplus_pages(struct hstate *h,
* evenly across all nodes with memory. Iterate across these nodes
* until we can no longer free unreserved surplus pages. This occurs
* when the nodes with surplus pages have no free pages.
- * free_pool_huge_page() will balance the the freed pages across the
+ * free_pool_huge_page() will balance the freed pages across the
* on-line nodes with memory and will handle the hstate accounting.
*/
while (nr_pages--) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 73d812f16dde..4bdf4edd2001 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4116,7 +4116,7 @@ static int __meminit zone_batchsize(struct zone *zone)
* locking.
*
* Any new users of pcp->batch and pcp->high should ensure they can cope with
- * those fields changing asynchronously (acording the the above rule).
+ * those fields changing asynchronously (according to the above rule).
*
* mutex_is_locked(&pcp_batch_high_lock) required when calling this function
* outside of boot time (or some other assurance that no concurrent updaters
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index f0817121ec5e..f87b46f17452 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -703,7 +703,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
return 0;
}
-/* Encrypt the the link */
+/* Encrypt the link */
static void hci_conn_encrypt(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index fb7356fcfe51..a2de73fadad7 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -616,7 +616,7 @@ static void hci_init3_req(struct hci_request *req, unsigned long opt)
* Delete Stored Link Key command. They are clearly indicating its
* absence in the bit mask of supported commands.
*
- * Check the supported commands and only if the the command is marked
+ * Check the supported commands and only if the command is marked
* as supported send it. If not supported assume that the controller
* does not have actual support for stored link keys which makes this
* command redundant anyway.
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index 7bd5ed4a8657..4a8d5cc43f06 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -200,7 +200,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3;
max = asoc->frag_point;
- /* If the the peer requested that we authenticate DATA chunks
+ /* If the peer requested that we authenticate DATA chunks
* we need to accound for bundling of the AUTH chunks along with
* DATA.
*/
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index ed04869b2d4f..99e14bb88952 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -184,7 +184,7 @@ void rpc_destroy_generic_auth(void)
}
/*
- * Test the the current time (now) against the underlying credential key expiry
+ * Test the current time (now) against the underlying credential key expiry
* minus a timeout and setup notification.
*
* The normal case:
diff --git a/net/tipc/link.c b/net/tipc/link.c
index 0cc3d9015c5d..c24371258185 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -920,7 +920,7 @@ int tipc_link_send_buf(struct tipc_link *l_ptr, struct sk_buff *buf)
/*
* tipc_link_send(): same as tipc_link_send_buf(), but the link to use has
- * not been selected yet, and the the owner node is not locked
+ * not been selected yet, and the owner node is not locked
* Called by TIPC internal users, e.g. the name distributor
*/
int tipc_link_send(struct sk_buff *buf, u32 dest, u32 selector)
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 7ab60babdd22..123539fb69f5 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
* @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
* %WIMAX_RF_OFF radio off.
*
- * Reports changes in the software RF switch state to the the WiMAX
+ * Reports changes in the software RF switch state to the WiMAX
* stack.
*
* The main use is during initialization, so the driver can query the
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index db40fa04cd51..9eb8c74b69a1 100644
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in
kernel/trace/trace_functions.c
The resulted trace is processed into a tree to produce a more human
view of the call stack by drawing textual but hierarchical tree of
-calls. Only the functions's names and the the call time are provided.
+calls. Only the functions's names and the call time are provided.
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
index 3064c6ced87c..7b9769e7985a 100644
--- a/security/apparmor/context.c
+++ b/security/apparmor/context.c
@@ -13,7 +13,7 @@
* License.
*
*
- * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * AppArmor sets confinement on every task, via the aa_task_cxt and
* the aa_task_cxt.profile, both of which are required and are not allowed
* to be NULL. The aa_task_cxt is not reference counted and is unique
* to each cred (which is reference count). The profile pointed to by
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 33cfd27b4de2..3969a808e3f3 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -459,7 +459,7 @@ error:
* keyring, otherwise replace the link to the matching key with a link to the
* new key.
*
- * The key must grant the caller Link permission and the the keyring must grant
+ * The key must grant the caller Link permission and the keyring must grant
* the caller Write permission. Furthermore, if an additional link is created,
* the keyring's quota will be extended.
*
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 748c6a941963..1e4021bc6ce3 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -4981,7 +4981,7 @@ EXPORT_SYMBOL_HDA(snd_hda_power_save);
* @nid: NID to check / update
*
* Check whether the given NID is in the amp list. If it's in the list,
- * check the current AMP status, and update the the power-status according
+ * check the current AMP status, and update the power-status according
* to the mute status.
*
* This function is supposed to be set or called from the check_power_status
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index fba0cef1c47f..c0f4058e472f 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -858,7 +858,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec,
static struct snd_kcontrol_new beep_vol_ctl =
HDA_CODEC_VOLUME(NULL, 0, 0, 0);
- /* check for mute support for the the amp */
+ /* check for mute support for the amp */
if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
const struct snd_kcontrol_new *temp;
if (spec->anabeep_nid == nid)
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index e610339f7601..6f8e5638a703 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -31,7 +31,7 @@
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
- * sampling rate. That means the the FPGA doubles the
+ * sampling rate. That means that the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index a53e175c015a..60224814fd84 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -694,7 +694,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int source)
u64 Kpart;
unsigned int K, Ndiv, Nmod, target;
- /* The the PLL output is always 98.304MHz. */
+ /* The PLL output is always 98.304MHz. */
target = 98304000;
/* If the input frequency is over 14.4MHz then scale it down. */
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index 9cc5c1f82f09..54f9a364f1b0 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -169,7 +169,7 @@ static void fsl_dma_abort_stream(struct snd_pcm_substream *substream)
/**
* fsl_dma_update_pointers - update LD pointers to point to the next period
*
- * As each period is completed, this function changes the the link
+ * As each period is completed, this function changes the link
* descriptor pointers for that period to point to the next period.
*/
static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 6b81d0ce2c44..10fc79e5f26e 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -1020,7 +1020,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
}
}
- /* Initialize the the device_attribute structure */
+ /* Initialize the device_attribute structure */
dev_attr = &ssi_private->dev_attr;
sysfs_attr_init(&dev_attr->attr);
dev_attr->attr.name = "statistics";
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index eee7afcae375..a28b953c904e 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -615,7 +615,7 @@ A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. The DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index fdfceee0ffd0..29b9bcd9d3ab 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -180,7 +180,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
- period being the hist entry period value
- - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option
+ - WEIGHT-A/WEIGHT-B being user suplied weights in the '-c' option
behind ':' separator like '-c wdiff:1,2'.
- WIEGHT-A being the weight of the data file
- WIEGHT-B being the weight of the baseline data file
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index b4ddb748356c..7e8aa3fe7ba7 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -35,9 +35,9 @@ The \fB-c MSR#\fP option includes the delta of the specified 32-bit MSR counter.
.PP
The \fB-C MSR#\fP option includes the delta of the specified 64-bit MSR counter.
.PP
-The \fB-m MSR#\fP option includes the the specified 32-bit MSR value.
+The \fB-m MSR#\fP option includes the specified 32-bit MSR value.
.PP
-The \fB-M MSR#\fP option includes the the specified 64-bit MSR value.
+The \fB-M MSR#\fP option includes the specified 64-bit MSR value.
.PP
The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
The default is 5 seconds.
--
1.8.1.2
^ permalink raw reply related [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2013-11-12 5:10 [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the " Michael Opdenacker
@ 2013-11-12 8:32 ` Arend van Spriel
2013-11-13 9:27 ` Michael Opdenacker
2013-12-09 10:36 ` [PATCH][RESEND] [TRIVIAL] " Michael Opdenacker
0 siblings, 2 replies; 35+ messages in thread
From: Arend van Spriel @ 2013-11-12 8:32 UTC (permalink / raw)
To: Michael Opdenacker, trivial; +Cc: linux-kernel
On 11/12/2013 06:10 AM, Michael Opdenacker wrote:
> Fix all occurrences of "the the " in the source code,
> comments and documentation.
>
> The replacement couldn't be automated because sometimes
> the first "the" was meant to be another word.
>
> Example: "according the the"
> meaning: "according to the"
>
> Note that I sometimes took the opportunity to fix
> other spelling issues or typos in the same sentences.
> I also fixed a few checkpatch errors in the same
> lines.
>
> This is an update to the patch sent on Sep. 12, 2013
Better put this kind of info below the signed-off-by line. Or even
better use the message-id of that patch in the 'In-Reply-To:' field that
git-send-email prompts for.
For driver change mentioned below:
Acked-by: Arend van Spriel <arend@broadcom.com>
> Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
---
so here: 'This is an update to the patch sent on Sep. 12, 2013'
> ---
> drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2013-11-12 8:32 ` Arend van Spriel
@ 2013-11-13 9:27 ` Michael Opdenacker
2013-12-09 10:36 ` [PATCH][RESEND] [TRIVIAL] " Michael Opdenacker
1 sibling, 0 replies; 35+ messages in thread
From: Michael Opdenacker @ 2013-11-13 9:27 UTC (permalink / raw)
To: Arend van Spriel, trivial; +Cc: linux-kernel
Hi Arend,
Thank you for reviewing this patch!
On 11/12/2013 09:32 AM, Arend van Spriel wrote:
> On 11/12/2013 06:10 AM, Michael Opdenacker wrote:
>>
>> This is an update to the patch sent on Sep. 12, 2013
>
> Better put this kind of info below the signed-off-by line. Or even
> better use the message-id of that patch in the 'In-Reply-To:' field
> that git-send-email prompts for.
This definitely makes sense. Thank you very much for your valuable
advise! I will do it next time :)
Cheers,
Michael.
>
> For driver change mentioned below:
> Acked-by: Arend van Spriel <arend@broadcom.com>
>> Signed-off-by: Michael Opdenacker
>> <michael.opdenacker@free-electrons.com>
> ---
> so here: 'This is an update to the patch sent on Sep. 12, 2013'
>> ---
>> drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
>
>
--
Michael Opdenacker, CEO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
+33 484 258 098
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH][RESEND] [TRIVIAL] treewide: fix occurrences of "the the "
2013-11-12 8:32 ` Arend van Spriel
2013-11-13 9:27 ` Michael Opdenacker
@ 2013-12-09 10:36 ` Michael Opdenacker
2014-03-05 5:52 ` [PATCH] [RESEND][TRIVIAL] " Michael Opdenacker
1 sibling, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2013-12-09 10:36 UTC (permalink / raw)
To: trivial; +Cc: arend, linux-kernel, Michael Opdenacker
Fix all occurrences of "the the " in the source code,
comments and documentation.
The replacement couldn't be automated because sometimes
the first "the" was meant to be another word.
Example: "according the the"
meaning: "according to the"
Note that I sometimes took the opportunity to fix
other spelling issues or typos in the same sentences.
I also fixed a few checkpatch errors in the same
lines.
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
This is an update to the patch sent several times since Sep. 12, 2013
---
Documentation/ABI/testing/sysfs-devices-memory | 2 +-
Documentation/DocBook/media/v4l/controls.xml | 2 +-
Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
Documentation/devicetree/bindings/arm/msm/timer.txt | 2 +-
Documentation/devicetree/bindings/ata/cavium-compact-flash.txt | 2 +-
Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt | 2 +-
Documentation/devicetree/bindings/mtd/fsmc-nand.txt | 2 +-
Documentation/email-clients.txt | 2 +-
Documentation/filesystems/autofs4-mount-control.txt | 6 +++---
Documentation/futex-requeue-pi.txt | 2 +-
Documentation/input/multi-touch-protocol.txt | 2 +-
Documentation/io-mapping.txt | 2 +-
Documentation/kmemcheck.txt | 2 +-
Documentation/networking/spider_net.txt | 2 +-
Documentation/phy.txt | 2 +-
Documentation/power/devices.txt | 2 +-
Documentation/security/Smack.txt | 2 +-
Documentation/static-keys.txt | 2 +-
Documentation/trace/ring-buffer-design.txt | 2 +-
Documentation/usb/WUSB-Design-overview.txt | 2 +-
Documentation/virtual/kvm/api.txt | 2 +-
Documentation/vm/unevictable-lru.txt | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/unwind.h | 2 +-
arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
arch/arm/mach-pxa/stargate2.c | 2 +-
arch/blackfin/mach-common/entry.S | 2 +-
arch/c6x/platforms/cache.c | 2 +-
arch/ia64/include/asm/spinlock.h | 2 +-
arch/ia64/include/asm/uv/uv_hub.h | 2 +-
arch/m68k/platform/coldfire/intc-2.c | 2 +-
arch/metag/kernel/process.c | 2 +-
arch/microblaze/kernel/entry.S | 2 +-
arch/mips/alchemy/devboards/pm.c | 2 +-
arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
arch/mips/include/asm/spinlock.h | 2 +-
arch/mips/kernel/smtc.c | 2 +-
arch/mips/kvm/kvm_mips.c | 2 +-
arch/mips/mm/c-octeon.c | 4 ++--
arch/mips/netlogic/xlr/fmn.c | 2 +-
arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
arch/powerpc/kernel/head_64.S | 2 +-
arch/powerpc/mm/gup.c | 2 +-
arch/powerpc/mm/hugetlbpage.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/platforms/chrp/setup.c | 2 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
arch/s390/mm/gup.c | 2 +-
arch/sparc/kernel/pci.c | 2 +-
arch/sparc/mm/gup.c | 2 +-
arch/tile/include/asm/irqflags.h | 2 +-
arch/tile/include/gxio/trio.h | 2 +-
arch/tile/kernel/single_step.c | 2 +-
arch/x86/include/asm/spinlock.h | 2 +-
arch/x86/include/asm/uv/uv_hub.h | 2 +-
arch/x86/kvm/x86.c | 2 +-
arch/x86/mm/gup.c | 4 ++--
arch/x86/xen/setup.c | 2 +-
arch/xtensa/include/asm/initialize_mmu.h | 2 +-
arch/xtensa/kernel/entry.S | 4 ++--
drivers/acpi/acpica/accommon.h | 2 +-
drivers/block/drbd/drbd_main.c | 2 +-
drivers/char/apm-emulation.c | 2 +-
drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
drivers/cpuidle/driver.c | 2 +-
drivers/crypto/picoxcell_crypto.c | 2 +-
drivers/crypto/ux500/hash/hash_core.c | 2 +-
drivers/gpio/gpio-ich.c | 2 +-
drivers/gpu/drm/i915/i915_gem.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 4 ++--
drivers/gpu/drm/radeon/atombios.h | 4 ++--
drivers/gpu/drm/radeon/r300_reg.h | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 2 +-
drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
drivers/gpu/drm/radeon/radeon_gart.c | 2 +-
drivers/hv/channel.c | 4 ++--
drivers/hv/vmbus_drv.c | 2 +-
drivers/hwmon/pmbus/ucd9200.c | 2 +-
drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
drivers/infiniband/hw/qib/qib.h | 2 +-
drivers/input/mouse/gpio_mouse.c | 2 +-
drivers/input/touchscreen/atmel_mxt_ts.c | 2 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
drivers/lguest/core.c | 2 +-
drivers/media/dvb-frontends/tda1002x.h | 2 +-
drivers/media/dvb-frontends/tda10048.c | 2 +-
drivers/media/pci/cx88/cx88-dsp.c | 2 +-
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/saa7164/saa7164-core.c | 2 +-
drivers/media/platform/davinci/vpbe.c | 2 +-
drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
drivers/media/usb/dvb-usb/friio.c | 2 +-
drivers/media/usb/dvb-usb/friio.h | 2 +-
drivers/media/usb/gspca/finepix.c | 2 +-
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/memory/emif.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/mfd/db8500-prcmu.c | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/ubi/ubi.h | 4 ++--
drivers/mtd/ubi/wl.c | 2 +-
drivers/net/ethernet/calxeda/xgmac.c | 2 +-
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +-
drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
drivers/net/wimax/i2400m/i2400m.h | 4 ++--
drivers/net/wimax/i2400m/rx.c | 2 +-
drivers/net/wimax/i2400m/tx.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/wcn36xx/hal.h | 6 +++---
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++--
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 ++--
drivers/of/base.c | 2 +-
drivers/pci/hotplug/acpiphp_glue.c | 2 +-
drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
drivers/power/power_supply_sysfs.c | 5 +++--
drivers/rtc/rtc-rs5c372.c | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 6 +++---
drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++--
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/remote_device.h | 2 +-
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/spi/spi-ppc4xx.c | 2 +-
drivers/staging/android/binder.h | 2 +-
drivers/staging/et131x/et131x.c | 2 +-
drivers/staging/lustre/lustre/llite/file.c | 2 +-
drivers/staging/lustre/lustre/ptlrpc/pinger.c | 2 +-
drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c | 4 ++--
drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/rtl8712/rtl871x_cmd.c | 2 +-
drivers/staging/sep/sep_main.c | 6 +++---
drivers/staging/tidspbridge/include/dspbridge/drv.h | 4 ++--
drivers/staging/tidspbridge/pmgr/dev.c | 2 +-
drivers/staging/wlags49_h2/README.wlags49 | 2 +-
drivers/target/target_core_alua.c | 4 ++--
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/mos7720.c | 4 ++--
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/uwb/drp-ie.c | 2 +-
drivers/video/omap/sossi.c | 2 +-
drivers/video/sis/sis_accel.c | 2 +-
fs/autofs4/dev-ioctl.c | 2 +-
fs/btrfs/dev-replace.c | 2 +-
fs/btrfs/send.c | 2 +-
fs/btrfs/tree-log.c | 2 +-
fs/dcache.c | 4 ++--
fs/ecryptfs/keystore.c | 2 +-
fs/ext2/ext2.h | 2 +-
fs/ext4/inline.c | 4 ++--
fs/f2fs/segment.h | 2 +-
fs/ocfs2/localalloc.c | 2 +-
fs/sysfs/file.c | 2 +-
fs/xfs/xfs_export.c | 2 +-
include/drm/drm_rect.h | 2 +-
include/linux/mm.h | 2 +-
include/linux/moduleparam.h | 2 +-
include/linux/skbuff.h | 2 +-
include/net/caif/caif_layer.h | 2 +-
include/net/ip6_fib.h | 2 +-
include/net/wimax.h | 2 +-
init/main.c | 2 +-
kernel/jump_label.c | 2 +-
kernel/printk/printk.c | 2 +-
kernel/smp.c | 2 +-
kernel/trace/ring_buffer.c | 2 +-
lib/bitmap.c | 2 +-
lib/dynamic_queue_limits.c | 2 +-
lib/earlycpio.c | 2 +-
lib/syscall.c | 2 +-
mm/hugetlb.c | 2 +-
mm/page_alloc.c | 2 +-
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/hci_core.c | 2 +-
net/sctp/chunk.c | 4 ++--
net/sunrpc/auth_generic.c | 2 +-
net/tipc/link.c | 2 +-
net/wimax/op-rfkill.c | 2 +-
scripts/tracing/draw_functrace.py | 2 +-
security/apparmor/context.c | 2 +-
security/keys/keyctl.c | 2 +-
sound/pci/hda/hda_codec.c | 2 +-
sound/pci/hda/patch_sigmatel.c | 2 +-
sound/pci/ice1712/prodigy192.c | 2 +-
sound/soc/codecs/wm9713.c | 2 +-
sound/soc/fsl/fsl_dma.c | 2 +-
sound/soc/fsl/fsl_ssi.c | 2 +-
sound/sparc/dbri.c | 2 +-
tools/perf/Documentation/perf-diff.txt | 2 +-
tools/power/x86/turbostat/turbostat.8 | 4 ++--
tools/thermal/tmon/pid.c | 2 +-
218 files changed, 253 insertions(+), 252 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index 7405de26ee60..4b3c0208d0a5 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -45,7 +45,7 @@ Description:
The file /sys/devices/system/memory/memoryX/state
is read-write. When read, its contents show the
online/offline state of the memory section. When written,
- root can toggle the the online/offline state of a removable
+ root can toggle the online/offline state of a removable
memory section (see removable file description above)
using the following commands.
# echo online > /sys/devices/system/memory/memoryX/state
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 7a3b49b3cc3b..7cfc7c21e128 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3303,7 +3303,7 @@ giving priority to the center of the metered area.</entry>
<row>
<entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant> </entry>
<entry>A multi-zone metering. The light intensity is measured
-in several points of the frame and the the results are combined. The
+in several points of the frame and the results are combined. The
algorithm of the zones selection and their significance in calculating the
final value is device dependent.</entry>
</row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
index f4e28e7d4751..721728745407 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
@@ -267,7 +267,7 @@ is intended for still imaging applications. The idea is to get the
best possible image quality that the hardware can deliver. It is not
defined how the driver writer may achieve that; it will depend on the
hardware and the ingenuity of the driver writer. High quality mode is
-a different mode from the the regular motion video capture modes. In
+a different mode from the regular motion video capture modes. In
high quality mode:<itemizedlist>
<listitem>
<para>The driver may be able to capture higher
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
index c6ef8f13dc7e..74607b6c1117 100644
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -8,7 +8,7 @@ Properties:
"qcom,kpss-timer" - krait subsystem
"qcom,scss-timer" - scorpion subsystem
-- interrupts : Interrupts for the the debug timer, the first general purpose
+- interrupts : Interrupts for the debug timer, the first general purpose
timer, and optionally a second general purpose timer in that
order.
diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
index 93986a5a8018..3bacc8e0931e 100644
--- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
+++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -9,7 +9,7 @@ Properties:
Compatibility with many Cavium evaluation boards.
-- reg: The base address of the the CF chip select banks. Depending on
+- reg: The base address of the CF chip select banks. Depending on
the device configuration, there may be one or two banks.
- cavium,bus-width: The width of the connection to the CF devices. Valid
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
index d63194a2c848..ada4e2973323 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
@@ -39,7 +39,7 @@ Optional Properties:
- lines-initial-states: Bitmask that specifies the initial state of each
line. When a bit is set to zero, the corresponding line will be initialized to
the input (pulled-up) state. When the bit is set to one, the line will be
- initialized the the low-level output state. If the property is not specified
+ initialized the low-level output state. If the property is not specified
all lines will be initialized to the input state.
The I/O expander can detect input state changes, and thus optionally act as
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index ec42935f3908..5235cbc551b0 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -9,7 +9,7 @@ Required properties:
Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width
defaults to 1 byte
-- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+- nand-skip-bbtscan: Indicates the BBT scanning should be skipped
- timings: array of 6 bytes for NAND timings. The meanings of these bytes
are:
byte 0 TCLR : CLE to RE delay in number of AHB clock cycles, only 4 bits
diff --git a/Documentation/email-clients.txt b/Documentation/email-clients.txt
index 860c29a472ad..e9f5daccbd02 100644
--- a/Documentation/email-clients.txt
+++ b/Documentation/email-clients.txt
@@ -104,7 +104,7 @@ Then from the "Message" menu item, select insert file and choose your patch.
As an added bonus you can customise the message creation toolbar menu
and put the "insert file" icon there.
-Make the the composer window wide enough so that no lines wrap. As of
+Make the composer window wide enough so that no lines wrap. As of
KMail 1.13.5 (KDE 4.5.4), KMail will apply word wrapping when sending
the email if the lines wrap in the composer window. Having word wrapping
disabled in the Options menu isn't enough. Thus, if your patch has very
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index 4c95935cbcf4..e54896427b4a 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -255,7 +255,7 @@ AUTOFS_DEV_IOCTL_OPENMOUNT and AUTOFS_DEV_IOCTL_CLOSEMOUNT
Obtain and release a file descriptor for an autofs managed mount point
path. The open call requires an initialized struct autofs_dev_ioctl with
-the the path field set and the size field adjusted appropriately as well
+the path field set and the size field adjusted appropriately as well
as the arg1 field set to the device number of the autofs mount. The
device number can be obtained from the mount options shown in
/proc/mounts. The close call requires an initialized struct
@@ -373,7 +373,7 @@ variation uses the path and optionally arg1 set to an autofs mount type.
The call returns 1 if this is a mount point and sets arg1 to the device
number of the mount and field arg2 to the relevant super block magic
number (described below) or 0 if it isn't a mountpoint. In both cases
-the the device number (as returned by new_encode_dev()) is returned
+the device number (as returned by new_encode_dev()) is returned
in field arg1.
If supplied with a file descriptor we're looking for a specific mount,
@@ -387,7 +387,7 @@ is one or 0 if it isn't a mountpoint.
If a path is supplied (and the ioctlfd field is set to -1) then the path
is looked up and is checked to see if it is the root of a mount. If a
type is also given we are looking for a particular autofs mount and if
-a match isn't found a fail is returned. If the the located path is the
+a match isn't found a fail is returned. If the located path is the
root of a mount 1 is returned along with the super magic of the mount
or 0 otherwise.
diff --git a/Documentation/futex-requeue-pi.txt b/Documentation/futex-requeue-pi.txt
index 9dc1ff4fd536..31b16610c416 100644
--- a/Documentation/futex-requeue-pi.txt
+++ b/Documentation/futex-requeue-pi.txt
@@ -67,7 +67,7 @@ pthread_cond_wait_pi(cond, mutex)
lock(cond->__data.__lock);
} while(...)
unlock(cond->__data.__lock);
- /* the kernel acquired the the mutex for us */
+ /* the kernel acquired the mutex for us */
}
pthread_cond_broadcast_pi(cond)
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index de139b18184a..7b4f59c09ee2 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -372,7 +372,7 @@ simple scheme, which is compatible with earlier usage, is:
Rationale: We have no information about the orientation of the touching
ellipse, so approximate it with an inscribed circle instead. The tool
-ellipse should align with the the vector (T - C), so the diameter must
+ellipse should align with the vector (T - C), so the diameter must
increase with distance(T, C). Finally, assume that the touch diameter is
equal to the tool thickness, and we arrive at the formulas above.
diff --git a/Documentation/io-mapping.txt b/Documentation/io-mapping.txt
index 473e43b2d588..5ca78426f54c 100644
--- a/Documentation/io-mapping.txt
+++ b/Documentation/io-mapping.txt
@@ -38,7 +38,7 @@ maps are more efficient:
void io_mapping_unmap_atomic(void *vaddr)
- 'vaddr' must be the the value returned by the last
+ 'vaddr' must be the value returned by the last
io_mapping_map_atomic_wc call. This unmaps the specified
page and allows the task to sleep once again.
diff --git a/Documentation/kmemcheck.txt b/Documentation/kmemcheck.txt
index 9398a501fdb9..a41bdebbe87b 100644
--- a/Documentation/kmemcheck.txt
+++ b/Documentation/kmemcheck.txt
@@ -541,7 +541,7 @@ initialized. This is the beginning of the struct:
92 } _sifields;
93 } siginfo_t;
-On 64-bit, the int is 4 bytes long, so it must the the union member that has
+On 64-bit, the int is 4 bytes long, so it must the union member that has
not been initialized. We can verify this using gdb:
$ gdb vmlinux
diff --git a/Documentation/networking/spider_net.txt b/Documentation/networking/spider_net.txt
index 4b4adb8eb14f..b0b75f8463b3 100644
--- a/Documentation/networking/spider_net.txt
+++ b/Documentation/networking/spider_net.txt
@@ -73,7 +73,7 @@ Thus, in an idle system, the GDACTDPA, tail and head pointers will
all be pointing at the same descr, which should be "empty". All of the
other descrs in the ring should be "empty" as well.
-The show_rx_chain() routine will print out the the locations of the
+The show_rx_chain() routine will print out the locations of the
GDACTDPA, tail and head pointers. It will also summarize the contents
of the ring, starting at the tail pointer, and listing the status
of the descrs that follow.
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index 0103e4b15b0e..603b353cb000 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -82,7 +82,7 @@ the string arguments should contain the phy name as given in the dt data and
in the case of non-dt boot, it should contain the label of the PHY.
The only difference between the two APIs is that devm_phy_get associates the
device with the PHY using devres on successful PHY get. On driver detach,
-release function is invoked on the the devres data and devres data is freed.
+release function is invoked on the devres data and devres data is freed.
5. Releasing a reference to the PHY
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index a66c9821b5ce..47d46dff70f7 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -391,7 +391,7 @@ When resuming from freeze, standby or memory sleep, the phases are:
the resume methods. This generally involves undoing the actions of the
preceding suspend_late phase.
- 3 The resume methods should bring the the device back to its operating
+ 3 The resume methods should bring the device back to its operating
state, so that it can perform normal I/O. This generally involves
undoing the actions of the suspend phase.
diff --git a/Documentation/security/Smack.txt b/Documentation/security/Smack.txt
index 7a2d30c132e3..5ea996f21d6c 100644
--- a/Documentation/security/Smack.txt
+++ b/Documentation/security/Smack.txt
@@ -3,7 +3,7 @@
"Good for you, you've decided to clean the elevator!"
- The Elevator, from Dark Star
-Smack is the the Simplified Mandatory Access Control Kernel.
+Smack is the Simplified Mandatory Access Control Kernel.
Smack is a kernel based implementation of mandatory access
control that includes simplicity in its primary design goals.
diff --git a/Documentation/static-keys.txt b/Documentation/static-keys.txt
index 9f5263d3152c..e5f46e7da54d 100644
--- a/Documentation/static-keys.txt
+++ b/Documentation/static-keys.txt
@@ -116,7 +116,7 @@ The branch(es) can then be switched via:
static_key_slow_dec(&key);
Thus, 'static_key_slow_inc()' means 'make the branch true', and
-'static_key_slow_dec()' means 'make the the branch false' with appropriate
+'static_key_slow_dec()' means 'make the branch false' with appropriate
reference counting. For example, if the key is initialized true, a
static_key_slow_dec(), will switch the branch to false. And a subsequent
static_key_slow_inc(), will change the branch back to true. Likewise, if the
diff --git a/Documentation/trace/ring-buffer-design.txt b/Documentation/trace/ring-buffer-design.txt
index 7d350b496585..ff747b6fa39b 100644
--- a/Documentation/trace/ring-buffer-design.txt
+++ b/Documentation/trace/ring-buffer-design.txt
@@ -683,7 +683,7 @@ against nested writers.
cmpxchg(tail_page, temp_page, next_page)
The above will update the tail page if it is still pointing to the expected
-page. If this fails, a nested write pushed it forward, the the current write
+page. If this fails, a nested write pushed it forward, the current write
does not need to push it.
diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt
index 4c5e37939344..1cd07c017cf6 100644
--- a/Documentation/usb/WUSB-Design-overview.txt
+++ b/Documentation/usb/WUSB-Design-overview.txt
@@ -25,7 +25,7 @@ updated content.
* Design-overview.txt-1.8
This code implements a Ultra Wide Band stack for Linux, as well as
-drivers for the the USB based UWB radio controllers defined in the
+drivers for the USB based UWB radio controllers defined in the
Wireless USB 1.0 specification (including Wireless USB host controller
and an Intel WiNET controller).
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index a30035dd4c26..60a67b3c4bc8 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1462,7 +1462,7 @@ struct kvm_lapic_state {
char regs[KVM_APIC_REG_SIZE];
};
-Copies the input argument into the the Local APIC registers. The data format
+Copies the input argument into the Local APIC registers. The data format
and layout are the same as documented in the architecture manual.
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index a68db7692ee8..441dd2266531 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -453,7 +453,7 @@ putback_lru_page() function to add migrated pages back to the LRU.
mmap(MAP_LOCKED) SYSTEM CALL HANDLING
-------------------------------------
-In addition the the mlock()/mlockall() system calls, an application can request
+In addition to the mlock()/mlockall() system calls, an application can request
that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c1f1a7eee953..4d2ec7a54360 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2026,7 +2026,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
+ appended to the device tree bootargs property.
endchoice
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index d1c3f3a71c94..4f697edd0bad 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -22,7 +22,7 @@
#ifndef __ASSEMBLY__
-/* Unwind reason code according the the ARM EABI documents */
+/* Unwind reason code according to the ARM EABI documents */
enum unwind_reason_code {
URC_OK = 0, /* operation completed successfully */
URC_CONTINUE_UNWIND = 8,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e3f0ecaf87dd..33a14bbc4747 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -721,7 +721,7 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
}
/**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * _init_main_clk - get a struct clk * for the hwmod's main functional clk
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
@@ -759,7 +759,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
}
/**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
@@ -802,7 +802,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
}
/**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 01de542432a6..6f92e75b6c35 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -423,7 +423,7 @@ static void __init imote2_stargate2_init(void)
}
#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
+/* As the imote2 doesn't currently have a conventional SD slot
* there is no option to hotplug cards, making all this rather simple
*/
static int imote2_mci_get_ro(struct device *dev)
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 86b5a095c5a1..9c8612385e00 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -480,7 +480,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
#ifdef CONFIG_EXACT_HWERR
/* Make sure all pending read/writes complete. This will ensure any
* accesses which could cause hardware errors completes, and signal
- * the the hardware before we do something silly, like crash the
+ * the hardware before we do something silly, like crash the
* kernel. We don't need to work around anomaly 05000312, since
* we are already atomic
*/
diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c
index 86318a16a252..dc21f94aaaaf 100644
--- a/arch/c6x/platforms/cache.c
+++ b/arch/c6x/platforms/cache.c
@@ -437,7 +437,7 @@ void __init c6x_cache_init(void)
if (!cache_base)
return;
- /* Set L2 caches on the the whole L2 SRAM memory */
+ /* Set L2 caches on the whole L2 SRAM memory */
L2_cache_set_mode(L2MODE_SIZE);
/* Enable L1 */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 45698cd15b7b..bd6ea40f3ef9 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -23,7 +23,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
* The pad bits in the middle are used to prevent the next_ticket number
* overflowing into the now_serving number.
*
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index 53e9dfacd073..3ea4168f28f7 100644
--- a/arch/ia64/include/asm/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -257,7 +257,7 @@ static inline int uv_numa_blade_id(void)
return 0;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return 0;
diff --git a/arch/m68k/platform/coldfire/intc-2.c b/arch/m68k/platform/coldfire/intc-2.c
index 995093357c59..f74f0e473119 100644
--- a/arch/m68k/platform/coldfire/intc-2.c
+++ b/arch/m68k/platform/coldfire/intc-2.c
@@ -7,7 +7,7 @@
* family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
* controllers, and the 547x and 548x families which have only one of them.
*
- * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * The external 7 fixed interrupts are part of the Edge Port unit of these
* ColdFire parts. They can be configured as level or edge triggered.
*
* (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff986a23..30052da1f1a4 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -211,7 +211,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
/*
* Get a pointer to where the new child's register block should have
* been pushed.
- * The Meta's stack grows upwards, and the context is the the first
+ * The Meta's stack grows upwards, and the context is the first
* thing to be pushed by TBX (phew)
*/
*childregs = *current_pt_regs();
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 0536bc021cc6..b417be09196d 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -445,7 +445,7 @@ TRAP_return: /* Make global symbol for debugging */
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look like the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index b86bff31d1d3..6363d3c93496 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -16,7 +16,7 @@
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
* is to trigger a wakeup.
*/
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index df69bfd2b006..4ec669f5b0d4 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index)
* offsetof() to determine the offsets into packet headers.
* For example, offsetof(ethhdr, protocol) returns the offset
* of the ethernet protocol field. The bitmask selects which
- * bytes to include the the tag, with bit offset X selecting
+ * bytes to include in the tag, with bit offset X selecting
* byte at offset X from the beginning of the packet data.
* @len: Number of bytes to include. Usually this is the sizeof()
* the field.
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index 78d201fb6c87..b6f41f6b6c70 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -31,7 +31,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*/
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index dfc1b911be04..cfde409cf48d 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -908,7 +908,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
if ((tcstatus & TCSTATUS_IXMT) != 0) {
/*
- * If we're in the the irq-off version of the wait
+ * If we're in the irq-off version of the wait
* loop, we need to force exit from the wait and
* do a direct post of the IPI.
*/
diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c
index 73b34827826c..ce754de84f6f 100644
--- a/arch/mips/kvm/kvm_mips.c
+++ b/arch/mips/kvm/kvm_mips.c
@@ -1198,7 +1198,7 @@ int __init kvm_mips_init(void)
/* On MIPS, kernel modules are executed from "mapped space", which requires TLBs.
* The TLB handling code is statically linked with the rest of the kernel (kvm_tlb.c)
* to avoid the possibility of double faulting. The issue is that the TLB code
- * references routines that are part of the the KVM module,
+ * references routines that are part of the KVM module,
* which are only available once the module is loaded.
*/
kvm_mips_gfn_to_pfn = gfn_to_pfn;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index c8efdb5b6ee0..0e8e350a46b7 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -349,7 +349,7 @@ static void co_cache_error_call_notifiers(unsigned long val)
}
/*
- * Called when the the exception is recoverable
+ * Called when the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -358,7 +358,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
}
/**
- * Called when the the exception is not recoverable
+ * Called when the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d428e8471eec..1d1eb1e10ae2 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -144,7 +144,7 @@ void xlr_percpu_fmn_init(void)
* For sending FMN messages, we need credits on the destination
* bucket. Program the credits this core has on the 128 possible
* destination buckets.
- * We cannot use a loop here, because the the first argument has
+ * We cannot use a loop here, because the first argument has
* to be a constant integer value.
*/
COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index 86b0ac79990c..51dd1f613865 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -246,7 +246,7 @@ static inline unsigned int ev_int_get_mask(unsigned int interrupt,
* ev_int_eoi - signal the end of interrupt processing
* @interrupt: the interrupt number
*
- * This function signals the end of processing for the the specified
+ * This function signals the end of processing for the specified
* interrupt, which must be the interrupt currently in service. By
* definition, this is also the highest-priority interrupt.
*
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index eb0f4ac75c4c..091791030ee6 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -30,7 +30,7 @@ struct arch_hw_breakpoint {
u16 len; /* length of the target data symbol */
};
-/* Note: Don't change the the first 6 bits below as they are in the same order
+/* Note: Don't change the first 6 bits below as they are in the same order
* as the dabr and dabrx.
*/
#define HW_BRK_TYPE_READ 0x01
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 2ae41aba4053..1d6bda145732 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -93,7 +93,7 @@ __secondary_hold_acknowledge:
#ifdef CONFIG_RELOCATABLE
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
- * is used by kexec-tools to keep the the kdump kernel in the
+ * is used by kexec-tools to keep the kdump kernel in the
* crash_kernel region. The loader is responsible for
* observing the alignment requirement.
*/
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index c5f734e20b0f..575aeee9da40 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -155,7 +155,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on powerpc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 90bb6d9409bf..65db97c8f98c 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -941,7 +941,7 @@ void flush_dcache_icache_hugepage(struct page *page)
* (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table
*
* So long as we atomically load page table pointers we are safe against teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 692998244d2c..a2ce00831362 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -9,7 +9,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * This file is a driver for the the General Purpose Timer (gpt) devices
+ * This file is a driver for the General Purpose Timer (gpt) devices
* found on the MPC5200 SoC. Each timer has an IO pin which can be used
* for GPIO or can be used to raise interrupts. The timer function can
* be used independently from the IO pin, or it can be used to control
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index c665d7de6c99..baeb4df3fb28 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -251,7 +251,7 @@ static void briq_restart(char *cmd)
* Per default, input/output-device points to the keyboard/screen
* If no card is installed, the built-in serial port is used as a fallback.
* But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
- * the the built-in serial node. Instead, a /failsafe node is created.
+ * to the built-in serial node. Instead, a /failsafe node is created.
*/
static void chrp_init_early(void)
{
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 084cdfa40682..c92edd859e70 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -927,7 +927,7 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
/*
* This function is supposed to be called on basis of PE from top
- * to bottom style. So the the I/O or MMIO segment assigned to
+ * to bottom style. So the I/O or MMIO segment assigned to
* parent PE could be overrided by its child PEs if necessary.
*/
static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 639fce464008..2f03d7badf95 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -187,7 +187,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* prevent the pagetables from being freed on s390.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index cb021453de2a..a2a8f4d6507a 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -305,7 +305,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
+ * firmware can sample the value before the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index c4d3da68b800..f3520cde45f1 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -189,7 +189,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on sparc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_disable();
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 71af5747874d..f7f64c80c5b2 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -116,7 +116,7 @@
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
* Likewise, INTCTRL_K is removed and re-added during device
- * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * interrupts, as is the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
* to know our current state.
diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h
index df10a662cc25..50a3d5cbad20 100644
--- a/arch/tile/include/gxio/trio.h
+++ b/arch/tile/include/gxio/trio.h
@@ -206,7 +206,7 @@ typedef struct {
/* Initialize a TRIO context.
*
* This function allocates a TRIO "service domain" and maps the MMIO
- * registers into the the caller's VA space.
+ * registers into the caller's VA space.
*
* @param trio_index Which TRIO shim; Gx36 must pass 0.
* @param context Context object to be initialized.
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index de07fa7d1315..c554ffbb50f7 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -277,7 +277,7 @@ P("\n");
/*
* Called after execve() has started the new image. This allows us
- * to reset the info state. Note that the the mmap'ed memory, if there
+ * to reset the info state. Note that the mmap'ed memory, if there
* was any, has already been unmapped by the exec.
*/
void single_step_execve(void)
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index bf156ded74b5..59213c3b0053 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -72,7 +72,7 @@ static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*
* We use an xadd covering *both* parts of the lock, to increment the tail and
* also load the position of the head, which takes care of memory ordering
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index a30836c8ac4d..d81914578c9b 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -522,7 +522,7 @@ static inline int uv_numa_blade_id(void)
return uv_hub_info->numa_blade_id;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return uv_cpu_to_blade[cpu];
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 21ef1ba184ae..cbf44328b296 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7067,7 +7067,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
if (current->mm == kvm->mm) {
/*
* Free memory regions allocated on behalf of userspace,
- * unless the the memory map has changed due to process exit
+ * unless the memory map has changed due to process exit
* or fd copying.
*/
struct kvm_userspace_memory_region mem;
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index dd74e46828c0..d9d367e59db6 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -275,7 +275,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
@@ -347,7 +347,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_disable();
pgdp = pgd_offset(mm, addr);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 68c054f59de6..4498fa4baa7c 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -463,7 +463,7 @@ char * __init xen_memory_setup(void)
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
- * We tried to make the the memblock_reserve more selective so
+ * We tried to make the memblock_reserve more selective so
* that it would be clear what region is reserved. Sadly we ran
* in the problem wherein on a 64-bit hypervisor with a 32-bit
* initial domain, the pt_base has the cr3 value which is not
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 722553f17db3..3c8e71ad5242 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -6,7 +6,7 @@
* For the new V3 MMU we remap the TLB from virtual == physical
* to the standard Linux mapping used in earlier MMU's.
*
- * The the MMU we also support a new configuration register that
+ * In the MMU we also support a new configuration register that
* specifies how the S32C1I instruction operates with the cache
* controller.
*
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 21dbe6bdb8ed..91615d5f1956 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
* of the proper size instead.
*
* This algorithm simply backs out the register changes started by the user
- * excpetion handler, makes it appear that we have started a window underflow
+ * exception handler, makes it appear that we have started a window underflow
* by rotating the window back and then setting the old window base (OWB) in
* the 'ps' register with the rolled back window base. The 'movsp' instruction
* will be re-executed and this time since the next window frames is in the
* active AR registers it won't cause an exception.
*
* If the WindowUnderflow code gets a TLB miss the page will get mapped
- * the the partial windeowUnderflow will be handeled in the double exception
+ * and the partial windeowUnderflow will be handeled in the double exception
* handler.
*
* Entry condition:
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 8a6c4a0d22db..90fe27f6f156 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -47,7 +47,7 @@
/*
* Common set of includes for all ACPICA source files.
* We put them here because we don't want to duplicate them
- * in the the source code again and again.
+ * in the source code again and again.
*
* Note: The order of these include files is important.
*/
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 9e3818b1bc83..64c5680850cd 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -2700,7 +2700,7 @@ enum drbd_ret_code conn_new_minor(struct drbd_tconn *tconn, unsigned int minor,
}
add_disk(disk);
- kref_init(&mdev->kref); /* one ref for both idrs and the the add_disk */
+ kref_init(&mdev->kref); /* one ref for both idrs and the add_disk */
/* inherit the connection state */
mdev->state.conn = tconn->cstate;
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index 46118f845948..6834b0108663 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -559,7 +559,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
wake_up_interruptible(&apm_waitqueue);
/*
- * Wait for the the suspend_acks_pending variable to drop to
+ * Wait for the suspend_acks_pending variable to drop to
* zero, meaning everybody acked the suspend event (or the
* process was killed.)
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 02225eb19cf6..619f3a30ec55 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -111,7 +111,7 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
}
/**
- * fifo_icap_set_read_size - Set the the size register.
+ * fifo_icap_set_read_size - Set the size register.
* @drvdata: a pointer to the drvdata.
* @data: the size of the following read transaction, in words.
**/
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index 06dbe7c86199..482b2cbb2ee9 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -168,7 +168,7 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv)
/*
* Look for the timer stop flag in the different states, so that we know
* if the broadcast timer has to be set up. The loop is in the reverse
- * order, because usually one of the deeper states have this flag set.
+ * order, because usually one of the deeper states has this flag set.
*/
for (i = drv->state_count - 1; i >= 0 ; i--) {
if (drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP) {
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index a6175ba6d238..f61829284324 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -53,7 +53,7 @@
#define CMD0_IRQ_THRESHOLD 1
/*
- * The timeout period (in jiffies) for a PDU. When the the number of PDUs in
+ * The timeout period (in jiffies) for a PDU. When the number of PDUs in
* flight is greater than the STAT_IRQ_THRESHOLD or 0 the timer is disabled.
* When there are packets in flight but lower than the threshold, we enable
* the timer and at expiry, attempt to remove any processed packets from the
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 1c73f4fbc252..2f2a4276a014 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -435,7 +435,7 @@ static int hash_get_device_data(struct hash_ctx *ctx,
* @keylen: The lengt of the key.
*
* Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the the hw design spec. Either due to incorrect info in the
+ * specified in the hw design spec. Either due to incorrect info in the
* spec or due to a bug in the hw.
*/
static void hash_hw_write_key(struct hash_device_data *device_data,
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 814addb62d2c..ee45a3d504f7 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -399,7 +399,7 @@ static int ichx_gpio_probe(struct platform_device *pdev)
/*
* If necessary, determine the I/O address of ACPI/power management
- * registers which are needed to read the the GPE0 register for GPI pins
+ * registers which are needed to read the GPE0 register for GPI pins
* 0 - 15 on some chipsets.
*/
if (!ichx_priv.desc->uses_gpe0)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 12bbd5eac70d..8ab860127b1e 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2147,7 +2147,7 @@ int __i915_add_request(struct intel_ring_buffer *ring,
/* Whilst this request exists, batch_obj will be on the
* active_list, and so will hold the active reference. Only when this
- * request is retired will the the batch_obj be moved onto the
+ * request is retired will the batch_obj be moved onto the
* inactive_list and lose its active reference. Hence we do not need
* to explicitly hold another reference here.
*/
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7ec8b488bb1d..059b7870f7c5 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2213,7 +2213,7 @@ void intel_display_handle_reset(struct drm_device *dev)
* will get its events and not get stuck.
*
* Also update the base address of all primary
- * planes to the the last fb to make sure we're
+ * planes to the last fb to make sure we're
* showing the correct fb after a reset.
*
* Need to make two loops over the crtcs so that we
@@ -9420,7 +9420,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
}
/* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
+ * update the output configuration. */
intel_modeset_update_state(dev, prepare_pipes);
if (dev_priv->display.modeset_global_resources)
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 92be50c39ffd..2be3040b28f1 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -2802,8 +2802,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t
ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 00c0d2ba22d3..36af5f14f622 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -353,7 +353,7 @@
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 39b033b441d2..ae6a65c79bd6 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -321,7 +321,7 @@ void radeon_doorbell_free(struct radeon_device *rdev, u32 doorbell)
/*
* radeon_wb_*()
- * Writeback is the the method by which the the GPU updates special pages
+ * Writeback is the method by which the GPU updates special pages
* in memory with the status of certain GPU events (fences, ring pointers,
* etc.).
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index d3a86e43c012..fdda9f838043 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -45,7 +45,7 @@
* for GPU/CPU synchronization. When the fence is written,
* it is expected that all buffers associated with that fence
* are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed. Whether
+ * that the relevant GPU caches have been flushed. Whether
* we use a scratch register or memory location depends on the asic
* and whether writeback is enabled.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index 3044e504f4ec..f37441e33d86 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -405,7 +405,7 @@ void radeon_gart_fini(struct radeon_device *rdev)
* (uncached system pages).
* Each VM has an ID associated with it and there is a page table
* associated with each VMID. When execting a command buffer,
- * the kernel tells the the ring what VMID to use for that command
+ * the kernel tells the ring what VMID to use for that command
* buffer. VMIDs are allocated dynamically as commands are submitted.
* The userspace drivers maintain their own address space and the kernel
* sets up their pages tables accordingly when they submit their
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index cea623c36ae2..cc959350da68 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -542,7 +542,7 @@ EXPORT_SYMBOL_GPL(vmbus_close);
* vmbus_sendpacket() - Send the specified buffer on the given channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @requestid: Identifier of the request
* @type: Type of packet that is being send e.g. negotiate, time
* packet etc.
@@ -717,7 +717,7 @@ EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
* vmbus_recvpacket() - Retrieve the user packet on the specified channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @buffer_actual_len: The actual size of the data after it was received
* @requestid: Identifier of the request
*
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 48aad4faea06..52bcb6c36862 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -888,7 +888,7 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the IRQ information
+ * VMBUS is an acpi enumerated device. Get the IRQ information
* from DSDT.
*/
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index 033d6aca47d3..d41d7e3bf31c 100644
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -117,7 +117,7 @@ static int ucd9200_probe(struct i2c_client *client,
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
- * for the the phases of the rail.
+ * for the phases of the rail.
*/
for (i = 0; i < info->pages; i++) {
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 28cfe97cf1e9..231b54591e2b 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -87,7 +87,7 @@
* These 3 values (SDR and DDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
+ * are also the possible values for ipath_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define IPATH_IB_SDR 1
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index 1946101419a3..1adecf0d2eb9 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -333,7 +333,7 @@ struct qib_verbs_txreq {
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for qib_link_speed_enabled and active
+ * are also the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 6b44413f54e3..59f820e6354f 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -18,7 +18,7 @@
/*
* Timer function which is run every scan_ms ms when the device is opened.
- * The dev input variable is set to the the input_dev pointer.
+ * The dev input variable is set to the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_polled_dev *dev)
{
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 59aa24002c7b..9842375c7b4e 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1017,7 +1017,7 @@ static int mxt_load_fw(struct device *dev, const char *fn)
frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
- /* We should add 2 at frame size as the the firmware data is not
+ /* We should add 2 at frame size as the firmware data is not
* included the CRC bytes.
*/
frame_size += 2;
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 114f3bcba1b0..24c15bfb2199 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1566,7 +1566,7 @@ reset_hfcsusb(struct hfcsusb *hw)
write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
((hw->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 0bf1e4edf04d..def8b3511e59 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -205,7 +205,7 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
/*:*/
/*H:030
- * Let's jump straight to the the main loop which runs the Guest.
+ * Let's jump straight to the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
* going around and around until something interesting happens.
*/
diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h
index e404b6e44802..ce0fb855c705 100644
--- a/drivers/media/dvb-frontends/tda1002x.h
+++ b/drivers/media/dvb-frontends/tda1002x.h
@@ -1,6 +1,6 @@
/*
TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index 71fb63299de7..17534ff576ca 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1134,7 +1134,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
state->pll_pfactor = 0;
}
- /* Establish any defaults the the user didn't pass */
+ /* Establish any defaults the user didn't pass */
tda10048_establish_defaults(&state->frontend);
/* Set the xtal and freq defaults */
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..1f8820f5f8c0 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -37,7 +37,7 @@
(compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
/* We calculate the baseband frequencies of the carrier and the pilot tones
- * based on the the sampling rate of the audio rds fifo. */
+ * based on the sampling rate of the audio rds fifo. */
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index 2ad65eb29832..00e0818abfc9 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -555,7 +555,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f)
reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94);
/* Okay, we've wasted time working out the correct value,
- but if we use it, it fouls the the window alignment.
+ but if we use it, it fouls the window alignment.
Fudge it to what we want... */
reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16));
reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16));
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 57ef5456f1e8..0515103e38aa 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -636,7 +636,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
}
/* Check that the hardware is accessible. If the status bytes are
- * 0xFF then the device is not accessible, the the IRQ belongs
+ * 0xFF then the device is not accessible, the IRQ belongs
* to another driver.
* 4 x u32 interrupt registers.
*/
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 33b9660b7f77..6ea16e20449d 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -316,7 +316,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
* vpbe_get_output - Get output
* @vpbe_dev - vpbe device ptr
*
- * return current vpbe output to the the index
+ * return current vpbe output to the index
*/
static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
{
diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index fb27ff7e1e07..0a9140ba9219 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -505,7 +505,7 @@ static int fimc_capture_open(struct file *file)
if (ret == 0 && vc->user_subdev_api && vc->inh_sensor_ctrls) {
/*
- * Recreate controls of the the video node to drop
+ * Recreate controls of the video node to drop
* any controls inherited from the sensor subdev.
*/
fimc_ctrls_delete(vc->ctx);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 1c3608039663..a9987990b9a0 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1671,7 +1671,7 @@ void omap3isp_print_status(struct isp_device *isp)
* To solve this problem power management support is split into prepare/complete
* and suspend/resume operations. The pipelines are stopped in prepare() and the
* ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
- * resume(), and the the pipelines are restarted in complete().
+ * resume(), and the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not modeled explicitly
* yet.
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index d56f927fc31a..b5d2e805380d 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 474a17e4db0c..4c7f8fed8046 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h
index 0f461ca10cb9..82d19dcdebc0 100644
--- a/drivers/media/usb/dvb-usb/friio.h
+++ b/drivers/media/usb/dvb-usb/friio.h
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
index 52bdb569760b..414c1b752911 100644
--- a/drivers/media/usb/gspca/finepix.c
+++ b/drivers/media/usb/gspca/finepix.c
@@ -143,7 +143,7 @@ again:
* for, then it's the end of the
* frame. Sometimes the jpeg is not complete,
* but there's nothing we can do. We also end
- * here if the the jpeg ends right at the end
+ * here if the jpeg ends right at the end
* of the frame. */
gspca_frame_add(gspca_dev, LAST_PACKET,
data, len);
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 1ccaaddaa307..e43f8629436b 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1313,7 +1313,7 @@ static int tm6000_usb_probe(struct usb_interface *interface,
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
-/* check if the the device has the iso in endpoint at the correct place */
+/* check if the device has the iso in endpoint at the correct place */
if (!dev->isoc_in.endp) {
printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
rc = -ENODEV;
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 899cb6d1c4a4..34e9e3e1652d 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -992,7 +992,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
}
/* Synchronize to the input stream by waiting for the FID bit to be
- * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE.
* stream->last_fid is initialized to -1, so the first isochronous
* frame will always be in sync.
*
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 04644e7b42b1..303b322756c7 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -373,7 +373,7 @@ static const struct lpddr2_addressing *get_addressing_table(
}
/*
- * Find the the right timing table from the array of timing
+ * Find the right timing table from the array of timing
* tables of the device using DDR clock frequency
*/
static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 5653e505f91f..eb9640c39bf7 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
* @target: per target private data
* @sdev: SCSI device
*
- * Update the target negotiation parameters based on the the Inquiry
+ * Update the target negotiation parameters based on the Inquiry
* data, adapter capabilities, and NVRAM settings.
**/
static void
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index b9ce60c301de..e63b854221aa 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -897,7 +897,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
- * This function sets the the operating point of the ARM.
+ * This function sets the operating point of the ARM.
*/
int db8500_prcmu_set_arm_opp(u8 opp)
{
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 913de07e577c..6482a9c4eb44 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -48,7 +48,7 @@
* kernel/user requirements.
*
* Blade percpu resources reserved for kernel use. These resources are
- * reserved whenever the the kernel context for the blade is loaded. Note
+ * reserved whenever the kernel context for the blade is loaded. Note
* that the kernel context is not guaranteed to be always available. It is
* loaded on demand & can be stolen by a user if the user demand exceeds the
* kernel demand. The kernel can always reload the kernel context but
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index b9e2000969f0..a90b40823cf2 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1594,7 +1594,7 @@ out_2:
* by xpc_notify_senders_of_disconnect_uv(), and to also get an
* error returned here will confuse them. Additionally, since
* in this case the channel is being disconnected we don't need
- * to put the the msg_slot back on the free list.
+ * to put the msg_slot back on the free list.
*/
if (cmpxchg(&msg_slot->func, func, NULL) != func) {
ret = xpSuccess;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index dabbc14db563..65931b51d843 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -967,7 +967,7 @@ static uint8_t gpmi_read_byte(struct mtd_info *mtd)
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
- * because the the operations are the same.
+ * because the operations are the same.
*/
static void block_mark_swapping(struct gpmi_nand_data *this,
void *payload, void *auxiliary)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 8ea6297a208f..86cabd9cc166 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -253,7 +253,7 @@ struct ubi_fm_pool {
/**
* struct ubi_volume - UBI volume description data structure.
- * @dev: device object to make use of the the Linux device model
+ * @dev: device object to make use of the Linux device model
* @cdev: character device object to create character device
* @ubi: reference to the UBI device description object
* @vol_id: volume ID
@@ -381,7 +381,7 @@ struct ubi_debug_info {
/**
* struct ubi_device - UBI device description structure
- * @dev: UBI device object to use the the Linux device model
+ * @dev: UBI device object to use for the Linux device model
* @cdev: character device object to create character device
* @ubi_num: UBI device number
* @ubi_name: UBI device name
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 02317c1c0238..a4ee3a342303 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -722,7 +722,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
/**
* sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
- * @e: the the physical eraseblock to erase
+ * @e: the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
*
* This function returns zero in case of success and a negative error code in
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index 4fc5c8ef5121..ad12d53e67f0 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1235,7 +1235,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
* @budget : maximum number of packets that the current CPU can receive from
* all interfaces.
* Description :
- * This function implements the the reception process.
+ * This function implements the reception process.
* Also it runs the TX completion thread
*/
static int xgmac_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 4cbb2f9850be..065da7406d4c 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -2467,7 +2467,7 @@ int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox,
* @data: len bytes to hold the data read
* @len: amount of data to read from window. Must be <=
* MEMWIN0_APERATURE after adjusting for 16B for T4 and
- * 128B for T5 alignment requirements of the the memory window.
+ * 128B for T5 alignment requirements of the memory window.
*
* Read len bytes of data from MC starting at @addr.
*/
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index fee64bf10446..23f95bf13426 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2247,7 +2247,7 @@ static irqreturn_t be_intx(int irq, void *dev)
}
be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- /* Return IRQ_HANDLED only for the the first spurious intr
+ /* Return IRQ_HANDLED only for the first spurious intr
* after a valid intr to stop the kernel from branding
* this irq as a bad one!
*/
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 2879b9631e15..0c988a290767 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -4068,7 +4068,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
* @hw: Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*/
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 42f0f6717511..6cb1e4eb591c 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3536,7 +3536,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
* @hw: pointer to the HW structure
*
* ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
- * register, so the the bus width is hard coded.
+ * register, so the bus width is hard coded.
**/
static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 47c2d10df826..71aca7caadf9 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2083,7 +2083,7 @@ out:
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index cc06854296a3..6c5c418aed5d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -223,7 +223,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
struct pci_dev *pdev;
- /* determine whether to use the the parent device
+ /* determine whether to use the parent device
*/
if (ixgbe_pcie_from_parent(&adapter->hw))
pdev = adapter->pdev->bus->parent->self;
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 9eeddbd0b2c7..a3a4c1ccdd90 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2167,7 +2167,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
/*
* In PCI 33 mode, the P_PLL is not used, and therefore,
- * the the P_PLL_LOCK bit in the adapter_status register will
+ * the P_PLL_LOCK bit in the adapter_status register will
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 64b4639f43b6..39fe59db9e60 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -83,7 +83,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* returns: 0 on success, -ETIMEDOUT on a timeout
*
* Writes the value to the requested register by first writing the value
- * into MWD register. The the MCR register is then appropriately setup
+ * into MWD register. The MCR register is then appropriately setup
* to finish the write operation.
*/
static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 5a34e72bab9a..6113a29f01bc 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -250,14 +250,14 @@ struct i2400m_barker_db;
*
* @bus_setup: [optional fill] Function called by the bus-generic code
* [i2400m_setup()] to setup the basic bus-specific communications
- * to the the device needed to load firmware. See LIFE CYCLE above.
+ * to the device needed to load firmware. See LIFE CYCLE above.
*
* NOTE: Doesn't need to upload the firmware, as that is taken
* care of by the bus-generic code.
*
* @bus_release: [optional fill] Function called by the bus-generic
* code [i2400m_release()] to shutdown the basic bus-specific
- * communications to the the device needed to load firmware. See
+ * communications to the device needed to load firmware. See
* LIFE CYCLE above.
*
* This function does not need to reset the device, just tear down
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 0b602951ff6b..4466ee71d1e4 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -693,7 +693,7 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq,
* right spot where to insert the packet; we know the queue is
* not empty, so we are not the first ones; we also know we
* are not going to be the last ones. The list is sorted, so
- * we have to insert before the the first guy with an nsn_itr
+ * we have to insert before the first guy with an nsn_itr
* greater that our nsn. */
skb_queue_walk(&roq->queue, skb_itr) {
roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb;
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index f20886ade1cc..1f7b2b922fae 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -233,7 +233,7 @@
* i2400m_tx_skip_tail() Marks unusable FIFO tail space
* i2400m->bus_tx_kick()
*
- * Now i2400m->bus_tx_kick() is the the bus-specific driver backend
+ * Now i2400m->bus_tx_kick() is the bus-specific driver backend
* implementation; that would do:
*
* i2400m->bus_tx_kick()
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index 1c584c4b019c..f34f24d362ed 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -77,7 +77,7 @@ struct rx_attention {
* first_msdu is set.
*
* peer_idx_invalid
- * Indicates no matching entries within the the max search
+ * Indicates no matching entries within the max search
* count. Only set when first_msdu is set.
*
* peer_idx_timeout
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index 61f6b21fb0ae..cb15404bea71 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -98,7 +98,7 @@ struct bus_request {
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- * implemented using the asynchronous mode allowing the the bus
+ * implemented using the asynchronous mode allowing the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 7126bdd4236c..f3827982d51b 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1176,7 +1176,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
* Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
+ * response is available in the FIFO
*
* CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index f087117b2e6b..403cda240e46 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -639,7 +639,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN,
AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT);
- /* on AR92xx, the highest bit of count will make the the chip send
+ /* on AR92xx, the highest bit of count will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index d39b79f5e841..61ab51069d17 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1620,7 +1620,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
- /* on AR93xx and newer, count = 0 will make the the chip send
+ /* on AR93xx and newer, count = 0 will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index c02dbc618724..9339cc6ee18a 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -1609,7 +1609,7 @@ struct wcn36xx_hal_config_bss_params {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -1746,7 +1746,7 @@ struct wcn36xx_hal_config_bss_params_v1 {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -3739,7 +3739,7 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
/* Length of the responce message */
u32 rsp_length;
- /* FIXME: Currently considering the the responce will be less than
+ /* FIXME: Currently considering that the responce will be less than
* 100bytes */
u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
} __packed;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 8138f1cff4e5..e353e7caf878 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3819,7 +3819,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
}
/*
- * Suspend the the MAC and update the slot timing
+ * Suspend the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index d606197bde8f..c03e73f835b8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -194,7 +194,7 @@ enum iwl_tx_flags {
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
+ * @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @key: security key
* @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
@@ -545,7 +545,7 @@ struct iwl_beacon_notif {
/**
* enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
+ * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
index a8652ddd6bed..89061e08c409 100644
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
@@ -65,7 +65,7 @@
#include "fw-api.h"
#include "mvm.h"
-/* Maps the driver specific channel width definition to the the fw values */
+/* Maps the driver specific channel width definition to the fw values */
static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
{
switch (chandef->width) {
@@ -86,7 +86,7 @@ static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
/*
* Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
+ * freq) definitions to the fw values
*/
static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
diff --git a/drivers/of/base.c b/drivers/of/base.c
index f807d0edabf3..fcc7b6e59c06 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1762,7 +1762,7 @@ static void of_alias_add(struct alias_prop *ap, struct device_node *np,
* of_alias_scan - Scan all properties of 'aliases' node
*
* The function scans all the properties of 'aliases' node and populate
- * the the global lookup table with the properties. It returns the
+ * the global lookup table with the properties. It returns the
* number of alias_prop found, or error code in error case.
*
* @dt_alloc: An allocator that provides a virtual address to memory
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 1cf605f67673..d1cf8a3461e1 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -36,7 +36,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#define pr_fmt(fmt) "acpiphp_glue: " fmt
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
index 7dfef3ee5b53..40511e39cea5 100644
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ b/drivers/pcmcia/pxa2xx_hx4700.c
@@ -33,7 +33,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/*
* IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
* The asic3 default IRQ type is level trigger low level detect, exactly
- * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+ * the signal present on GPIOD4_CF_nCD when a CF card is inserted.
* If the IRQ type is not changed, the asic3 interrupt handler will loop
* repeatedly because it is unable to clear the level trigger interrupt.
*/
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 44420d1e9094..aa6d52ef8f3f 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -294,8 +294,9 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
ret = power_supply_show_property(dev, attr, prop_buf);
if (ret == -ENODEV || ret == -ENODATA) {
- /* When a battery is absent, we expect -ENODEV. Don't abort;
- send the uevent with at least the the PRESENT=0 property */
+ /* When a battery is absent, we expect -ENODEV.
+ * Don't abort; send the uevent with at least
+ * the PRESENT=0 property */
ret = 0;
continue;
}
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index ccf54f06396b..2108302cc965 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -122,7 +122,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
- * configurations, so we use the the first method there, stripping off
+ * configurations, so we use the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index eb4e1f809feb..6f93c519606c 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3374,7 +3374,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 2035b0d64351..e62a7346428a 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1983,7 +1983,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
/*
* Device's PID has changed. We need to cleanup
* and re-login. If there is another device with
- * the the newly discovered pid, send an scn notice
+ * the newly discovered pid, send an scn notice
* so that its new pid can be discovered.
*/
list_for_each(qe, &rport->port->rport_q) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index f3170008ae71..854ac59389b8 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -510,7 +510,7 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
* @skb: The receive skb
* @netdev: The associated net device
* @ptype: The packet_type structure which was used to register this handler
- * @orig_dev: The original net_device the the skb was received on.
+ * @orig_dev: The original net_device that the skb was received on.
* (in case dev is a bond)
*
* Returns: 0 for success
@@ -2716,7 +2716,7 @@ module_exit(fcoe_exit);
* fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
* @seq: active sequence in the FLOGI or FDISC exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
@@ -2745,7 +2745,7 @@ done:
* fcoe_logo_resp() - FCoE specific LOGO response handler
* @seq: active sequence in the LOGO exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 34a1b1f333b4..65a53a9eb059 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -213,7 +213,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new)
* that doesn't have a priv (fcf was deleted). However,
* libfcoe will always delete FCFs before trying to add
* them. This is ensured because both recv_adv and
- * age_fcfs are protected by the the fcoe_ctlr's mutex.
+ * age_fcfs are protected by the fcoe_ctlr's mutex.
* This means that we should never get a FCF with a
* non-NULL priv pointer.
*/
@@ -694,7 +694,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
*
* The caller must check that the length is a multiple of 4.
* The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
- * The the skb must also be an fc_frame.
+ * The skb must also be an fc_frame.
*
* This is called from the lower-level driver with spinlocks held,
* so we must not take a mutex here.
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 4911310a38f5..cc2b2c0d22eb 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -244,7 +244,7 @@ enum sci_controller_states {
SCIC_INITIALIZED,
/**
- * This state indicates the the controller is in the process of becoming
+ * This state indicates that the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 47a013fffae7..07af745220eb 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete(
* permitted. This state is entered from the INITIAL state. This state
* is entered from the STOPPING state.
*
- * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * @SCI_DEV_STARTING: This state indicates that the remote device is in
* the process of becoming ready (i.e. starting). In this state no new
* IO operations are permitted. This state is entered from the STOPPED
* state.
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
index c7ee81d01125..f22950b12b8b 100644
--- a/drivers/scsi/isci/remote_node_context.h
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state {
/**
* struct sci_remote_node_context - This structure contains the data
* associated with the remote node context object. The remote node context
- * (RNC) object models the the remote device information necessary to manage
+ * (RNC) object models the remote device information necessary to manage
* the silicon RNC.
*/
struct sci_remote_node_context {
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 0d30ca849e8f..63da523e73a6 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -67,7 +67,7 @@
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
-* @ihost: host on which the the request was queued
+* @ihost: host on which the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 00656fc92b93..5da6568e2e50 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1654,7 +1654,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -1687,7 +1687,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -1820,7 +1820,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -1852,7 +1852,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 110445f0c58d..1ced9822c051 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5783,7 +5783,7 @@ reject_out:
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful, the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 883ea2d9f237..345ad3150ccf 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2014,7 +2014,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so that the round robin selection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
@@ -5705,7 +5705,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
}
/* This routine decrements the reference count for a ndlp structure. If the
- * count goes to 0, this indicates the the associated nodelist should be
+ * count goes to 0, this indicates that the associated nodelist should be
* freed. Returning 1 indicates the ndlp resource has been released; on the
* other hand, returning 0 indicates the ndlp resource has not been released
* yet.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 68c94cc85c35..dd1f6e9ead10 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3783,7 +3783,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelevant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 1f292e29d566..d9a9ddbf1771 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2265,7 +2265,7 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * that the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 8f580fda443f..3b47f86d01f8 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -16341,7 +16341,7 @@ out:
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 0a1296a87d66..051a475cbe10 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3255,7 +3255,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when HBA driver received the identify done event or initiate FIS received
* event(for SATA), it will invoke this function to notify the sas layer that
- * the sas toplogy has formed, please discover the the whole sas domain,
+ * the sas toplogy has formed, please discover the whole sas domain,
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 5ee56726f8d0..be2b89e0889c 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -355,7 +355,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
{
/*
* On all 4xx PPC's the SPI bus is shared/multiplexed with
- * the 2nd I2C bus. We need to enable the the SPI bus before
+ * the 2nd I2C bus. We need to enable the SPI bus before
* using it.
*/
diff --git a/drivers/staging/android/binder.h b/drivers/staging/android/binder.h
index cbe345168067..98161a5f0f1a 100644
--- a/drivers/staging/android/binder.h
+++ b/drivers/staging/android/binder.h
@@ -246,7 +246,7 @@ enum binder_driver_return_protocol {
BR_FAILED_REPLY = _IO('r', 17),
/*
- * The the last transaction (either a bcTRANSACTION or
+ * The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
};
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index ab8b29d2cb26..ca4f75dcbbea 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -1239,7 +1239,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
/* Initialize the Space Available Register */
writel(0, &rxmac->space_avail);
- /* Initialize the the mif_ctrl register
+ /* Initialize the mif_ctrl register
* bit 3: Receive code error. One or more nibbles were signaled as
* errors during the reception of the packet. Clear this
* bit in Gigabit, set it in 100Mbit. This was derived
diff --git a/drivers/staging/lustre/lustre/llite/file.c b/drivers/staging/lustre/lustre/llite/file.c
index fb85a58db058..7540b8e912ca 100644
--- a/drivers/staging/lustre/lustre/llite/file.c
+++ b/drivers/staging/lustre/lustre/llite/file.c
@@ -318,7 +318,7 @@ int ll_file_release(struct inode *inode, struct file *file)
fd = LUSTRE_FPRIVATE(file);
LASSERT(fd != NULL);
- /* The last ref on @file, maybe not the the owner pid of statahead.
+ /* The last ref on @file, maybe not the owner pid of statahead.
* Different processes can open the same dir, "ll_opendir_key" means:
* it is me that should stop the statahead thread. */
if (S_ISDIR(inode->i_mode) && lli->lli_opendir_key == fd &&
diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
index 4d340f4a2198..5de07b8852ff 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
@@ -507,7 +507,7 @@ struct timeout_item* ptlrpc_new_timeout(int time, enum timeout_event event,
}
/**
- * Register timeout event on the the pinger thread.
+ * Register timeout event on the pinger thread.
* Note: the timeout list is an sorted list with increased timeout value.
*/
static struct timeout_item*
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
index 304579096562..a8bbd7fb26f2 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
@@ -216,7 +216,7 @@ ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
{
struct ieee80211_hdr_4addr *hdr;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
/* On the struct stats definition there is written that
@@ -485,7 +485,7 @@ int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
struct ieee80211_crypt_data *crypt = NULL;
int keyidx = 0;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index f45f4eddb741..45532e09c348 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -968,7 +968,7 @@ _func_enter_;
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the connection. */
+ /* If the driver wants to use the bssid to create the connection. */
/* If not, we have to copy the connecting AP's MAC address to it so that */
/* the driver just has the bssid information for PMKIDList searching. */
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index e730ed64c0fe..5981ef17a520 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -926,7 +926,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
int i;
struct ieee80211_rxb *rxb = NULL;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.c b/drivers/staging/rtl8712/rtl871x_cmd.c
index 7e324315e6ad..e36d10182e93 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -536,7 +536,7 @@ u8 r8712_joinbss_cmd(struct _adapter *padapter, struct wlan_network *pnetwork)
memcpy(&psecuritypriv->authenticator_ie[1],
&psecnetwork->IEs[12], (256-1));
psecnetwork->IELength = 0;
- /* If the the driver wants to use the bssid to create the connection.
+ /* If the driver wants to use the bssid to create the connection.
* If not, we copy the connecting AP's MAC address to it so that
* the driver just has the bssid information for PMKIDList searching.
*/
diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
index 1e80a4013b8c..41bbfca3c7ff 100644
--- a/drivers/staging/sep/sep_main.c
+++ b/drivers/staging/sep/sep_main.c
@@ -1207,7 +1207,7 @@ static int sep_lock_user_pages(struct sep_device *sep,
int error = 0;
u32 count;
int result;
- /* The the page of the end address of the user space buffer */
+ /* The page of the end address of the user space buffer */
u32 end_page;
/* The page of the start address of the user space buffer */
u32 start_page;
@@ -1406,7 +1406,7 @@ static int sep_lli_table_secure_dma(struct sep_device *sep,
{
int error = 0;
u32 count;
- /* The the page of the end address of the user space buffer */
+ /* The page of the end address of the user space buffer */
u32 end_page;
/* The page of the start address of the user space buffer */
u32 start_page;
@@ -1725,7 +1725,7 @@ static void *sep_shared_area_bus_to_virt(struct sep_device *sep,
* @num_table_entries: number of entries
* @table_data_size: total data size
*
- * Walk the the list of the print created tables and print all the data
+ * Walk the list of the print created tables and print all the data
*/
static void sep_debug_print_lli_tables(struct sep_device *sep,
struct sep_lli_entry *lli_table_ptr,
diff --git a/drivers/staging/tidspbridge/include/dspbridge/drv.h b/drivers/staging/tidspbridge/include/dspbridge/drv.h
index b0c7708321b2..ee44aaea6dee 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/drv.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/drv.h
@@ -253,7 +253,7 @@ extern int drv_get_dev_object(u32 index,
/*
* ======== drv_get_next_dev_object ========
* Purpose:
- * Returns the Ptr to the Next Device Object from the the List
+ * Returns the Ptr to the Next Device Object from the List
* Parameters:
* hdev_obj: Handle to the Device Object
* Requires:
@@ -269,7 +269,7 @@ extern u32 drv_get_next_dev_object(u32 hdev_obj);
/*
* ======== drv_get_next_dev_extension ========
* Purpose:
- * Returns the Ptr to the Next Device Extension from the the List
+ * Returns the Ptr to the Next Device Extension from the List
* Parameters:
* dev_extension: Handle to the Device Extension
* Requires:
diff --git a/drivers/staging/tidspbridge/pmgr/dev.c b/drivers/staging/tidspbridge/pmgr/dev.c
index 6234ffb5e8a3..408bb6ba571a 100644
--- a/drivers/staging/tidspbridge/pmgr/dev.c
+++ b/drivers/staging/tidspbridge/pmgr/dev.c
@@ -897,7 +897,7 @@ int dev_get_dev_type(struct dev_object *dev_obj, u8 *dev_type)
*
* 1. All Bridge function pointers which are NULL; and
* 2. All function slots in the struct dev_object structure which have no
- * corresponding slots in the the Bridge's interface, because the Bridge
+ * corresponding slots in the Bridge's interface, because the Bridge
* is of an *older* version.
* Parameters:
* intf_fxns: Interface fxn Structure of the Bridge's Dev Object.
diff --git a/drivers/staging/wlags49_h2/README.wlags49 b/drivers/staging/wlags49_h2/README.wlags49
index f65acd6f5f54..368a22b32f23 100644
--- a/drivers/staging/wlags49_h2/README.wlags49
+++ b/drivers/staging/wlags49_h2/README.wlags49
@@ -396,7 +396,7 @@ Version 7.22 abg - July 28, 2004
TxKey=1
this configures eth1 to associate to the ESSID 'some_network' with
- encryption on, where the the first encryption key is 'net01' and the key to
+ encryption on, where the first encryption key is 'net01' and the key to
use for encryption is Key 1.
Note that this only works on Agere hardware which uses this driver. For
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index fdcee326bfbc..070107b444dc 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -325,8 +325,8 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
} else {
/*
- * Extract the RELATIVE TARGET PORT IDENTIFIER to identify
- * the Target Port in question for the the incoming
+ * Extact the RELATIVE TARGET PORT IDENTIFIER to identify
+ * the Target Port in question for the incoming
* SET_TARGET_PORT_GROUPS op.
*/
rtpi = get_unaligned_be16(ptr + 2);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 53c2e296467f..cd69b21be962 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1809,7 +1809,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
- * RExit to a disconnect state). If so, let the the driver know it's
+ * RExit to a disconnect state). If so, let the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED(temp) &&
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 558605d646f3..b69b3370c415 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -263,7 +263,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
* Cypress app note that describes this mechanism
- * states the the low-speed part can't handle more
+ * states that the low-speed part can't handle more
* than 800 bytes/sec, in which case 4800 baud is the
* safest speed for a part like that.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 439c951f261b..e953f1ed401a 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -432,7 +432,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
}
/*
- * This is the the common top part of all parallel port callback operations that
+ * This is the common top part of all parallel port callback operations that
* send synchronous messages to the device. This implements convoluted locking
* that avoids two scenarios: (1) a port operation is called after usbserial
* has called our release function, at which point struct mos7715_parport has
@@ -471,7 +471,7 @@ static int parport_prologue(struct parport *pp)
}
/*
- * This is the the common bottom part of all parallel port functions that send
+ * This is the common bottom part of all parallel port functions that send
* synchronous messages to the device.
*/
static inline void parport_epilogue(struct parport *pp)
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index f14e7929ba22..f3cd603310ac 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -46,7 +46,7 @@
*
* ASSUMPTIONS:
*
- * - We use the the as device address the port number where it is
+ * - We use as device address the port number where it is
* connected (port 0 doesn't exist). For unauth, it is 128 + that.
*
* ROADMAP:
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
index b7d4f6b75eef..caa4cb40334d 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/uwb/drp-ie.c
@@ -262,7 +262,7 @@ int uwb_drp_ie_update(struct uwb_rsv *rsv)
* We are given a zone id and the MAS bitmap of bits that need to be set in
* this zone. Note that this zone may already have bits set and this only
* adds settings - we cannot simply assign the MAS bitmap contents to the
- * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * zone contents. We iterate over the bits (MAS) in the zone and set the
* bits that are set in the given MAS bitmap.
*/
static
diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
index d4e7684e7045..501bc08dc125 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/omap/sossi.c
@@ -370,7 +370,7 @@ static void sossi_set_bits_per_cycle(int bpc)
int bus_pick_count, bus_pick_width;
/*
- * We set explicitly the the bus_pick_count as well, although
+ * We set explicitly the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
diff --git a/drivers/video/sis/sis_accel.c b/drivers/video/sis/sis_accel.c
index ceb434c95c0d..9177b8056356 100644
--- a/drivers/video/sis/sis_accel.c
+++ b/drivers/video/sis/sis_accel.c
@@ -215,7 +215,7 @@ SiS310SubsequentScreenToScreenCopy(struct sis_video_info *ivideo, int src_x, int
* and destination blitting areas overlap and
* adapt the bitmap addresses synchronously
* if the coordinates exceed the valid range.
- * The the areas do not overlap, we do our
+ * If the areas do not overlap, we do our
* normal check.
*/
if((mymax - mymin) < height) {
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 1818ce7f5a06..fb7713815f66 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -492,7 +492,7 @@ static int autofs_dev_ioctl_askumount(struct file *fp,
* located path is the root of a mount we return 1 along with
* the super magic of the mount or 0 otherwise.
*
- * In both cases the the device number (as returned by
+ * In both cases the device number (as returned by
* new_encode_dev()) is also returned.
*/
static int autofs_dev_ioctl_ismountpoint(struct file *fp,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index 2cfc3dfff64f..d4f7f42e3e9e 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -801,7 +801,7 @@ int btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace)
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
- * not called and the the filesystem is remounted
+ * not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancelation is wanted.
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index 6837fe87f3a6..309599e493f0 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -2738,7 +2738,7 @@ verbose_printk("btrfs: process_recorded_refs %llu\n", sctx->cur_ino);
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
- * the the current inum. To handle this case, we create the
+ * than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 9f7fc51ca334..f63472ecaef5 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2582,7 +2582,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
mutex_unlock(&log_root_tree->log_mutex);
/*
- * nobody else is going to jump in and write the the ctree
+ * nobody else is going to jump in and write the ctree
* super here because the log_commit atomic below is protecting
* us. We must be called with a transaction handle pinning
* the running transaction open, so a full commit can't hop
diff --git a/fs/dcache.c b/fs/dcache.c
index 4bdb300b16e2..3d739837c11a 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1966,8 +1966,8 @@ EXPORT_SYMBOL(d_splice_alias);
* same inode, only the actual correct case is stored in the dcache for
* case-insensitive filesystems.
*
- * For a case-insensitive lookup match and if the the case-exact dentry
- * already exists in in the dcache, use it and return it.
+ * For a case-insensitive lookup match and if the case-exact dentry
+ * already exists in the dcache, use it and return it.
*
* If no entry exists with the exact case name, allocate new dentry with
* the exact case, and return the spliced entry.
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 4725a07f003c..bcdfbc7568d7 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -900,7 +900,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack {
* @filename: This function kmalloc's the memory for the filename
* @filename_size: This function sets this to the amount of memory
* kmalloc'd for the filename
- * @packet_size: This function sets this to the the number of octets
+ * @packet_size: This function sets this to the number of octets
* in the packet parsed
* @mount_crypt_stat: The mount-wide cryptographic context
* @data: The memory location containing the start of the tag 70
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index d9a17d0b124d..c9c6f2e5a0a0 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -51,7 +51,7 @@ struct ext2_block_alloc_info {
/*
* Was i_next_alloc_goal in ext2_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it is the physical block number of the block which was most-recently
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index bae987549dc3..65211a1ae6d7 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -276,7 +276,7 @@ static int ext4_create_inline_data(handle_t *handle,
len = 0;
}
- /* Insert the the xttr entry. */
+ /* Insert the xttr entry. */
i.value = value;
i.value_len = len;
@@ -832,7 +832,7 @@ out:
/*
* Prepare the write for the inline data.
- * If the the data can be written into the inode, we just read
+ * If the data can be written into the inode, we just read
* the page and make it uptodate, and start the journal.
* Otherwise read the page, makes it dirty so that it can be
* handle in writepages(the i_disksize update is left to the
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index 269f690b4e24..23f17daa2479 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -157,7 +157,7 @@ struct seg_entry {
unsigned short valid_blocks; /* # of valid blocks */
unsigned char *cur_valid_map; /* validity bitmap of blocks */
/*
- * # of valid blocks and the validity bitmap stored in the the last
+ * # of valid blocks and the validity bitmap stored in the last
* checkpoint pack. This information is used by the SSR mode.
*/
unsigned short ckpt_valid_blocks;
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index cd5496b7a0a3..dd27d2b14f60 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -690,7 +690,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb,
/*
* Under certain conditions, the window slide code
* might have reduced the number of bits available or
- * disabled the the local alloc entirely. Re-check
+ * disabled the local alloc entirely. Re-check
* here and return -ENOSPC if necessary.
*/
status = -ENOSPC;
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index b94f93685093..9aec35c7fcd8 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -267,7 +267,7 @@ static int flush_write_buffer(struct sysfs_open_file *of, char *buf, loff_t off,
* There is no easy way for us to know if userspace is only doing a partial
* write, so we don't support them. We expect the entire buffer to come on
* the first write. Hint: if you're writing a value, first read the file,
- * modify only the the value you're changing, then write entire buffer
+ * modify only the value you're changing, then write entire buffer
* back.
*/
static ssize_t sysfs_write_file(struct file *file, const char __user *user_buf,
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index 1399e187d425..77a43bcad6f5 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -71,7 +71,7 @@ xfs_fs_encode_fh(
fileid_type = FILEID_INO32_GEN_PARENT;
/*
- * If the the filesystem may contain 64bit inode numbers, we need
+ * If the filesystem may contain 64bit inode numbers, we need
* to use larger file handles that can represent them.
*
* While we only allocate inodes that do not fit into 32 bits any
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index d1286297567b..1f6d6c3e195c 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -120,7 +120,7 @@ static inline int drm_rect_height(const struct drm_rect *r)
}
/**
- * drm_rect_visible - determine if the the rectangle is visible
+ * drm_rect_visible - determine if the rectangle is visible
* @r: rectangle whose visibility is returned
*
* RETURNS:
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 1cedd000cf29..d2b807469731 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -183,7 +183,7 @@ extern pgprot_t protection_map[16];
#define FAULT_FLAG_USER 0x80 /* The fault originated in userspace */
/*
- * vm_fault is filled by the the pagefault handler and passed to the vma's
+ * vm_fault is filled by the pagefault handler and passed to the vma's
* ->fault function. The vma's ->fault is responsible for returning a bitmask
* of VM_FAULT_xxx flags that give details about how the fault was handled.
*
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index c3eb102a9cc8..cf956c945ced 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -94,7 +94,7 @@ struct kparam_array
* ".") the kernel commandline parameter. Note that - is changed to _, so
* the user can use "foo-bar=1" even for variable "foo_bar".
*
- * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * @perm is 0 if the variable is not to appear in sysfs, or 0444
* for world-readable, 0644 for root-writable, etc. Note that if it
* is writable, you may need to use kparam_block_sysfs_write() around
* accesses (esp. charp, which can be kfreed when it changes).
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index bec1cc7d5e3c..afa73b15cf09 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2495,7 +2495,7 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
* must call this function to return the skb back to the stack, with
* or without a timestamp.
*
- * @skb: clone of the the original outgoing packet
+ * @skb: clone of the original outgoing packet
* @hwtstamps: hardware time stamps, may be NULL if not available
*
*/
diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h
index 94e5ed64dc6d..e9a8d524ab06 100644
--- a/include/net/caif/caif_layer.h
+++ b/include/net/caif/caif_layer.h
@@ -184,7 +184,7 @@ struct cflayer {
* CAIF packet downwards in the stack.
* Packet handling rules:
* - The CAIF packet (cfpkt) ownership is passed to the
- * transmit function. This means that the the packet
+ * transmit function. This means that the packet
* cannot be accessed after passing it to the below
* layer using dn->transmit().
*
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 2182525e4d74..ca94298e9a74 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -100,7 +100,7 @@ struct rt6_info {
struct in6_addr rt6i_gateway;
/* Multipath routes:
- * siblings is a list of rt6_info that have the the same metric/weight,
+ * siblings is a list of rt6_info that have the same metric/weight,
* destination, but not the same gateway. nsiblings is just a cache
* to speed up lookup.
*/
diff --git a/include/net/wimax.h b/include/net/wimax.h
index 98498e1daa06..74602ef06494 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -43,7 +43,7 @@
*
* USAGE
*
- * Embed a `struct wimax_dev` at the beginning of the the device's
+ * Embed a `struct wimax_dev` at the beginning of the device's
* private structure, initialize and register it. For details, see
* `struct wimax_dev`s documentation.
*
diff --git a/init/main.c b/init/main.c
index febc511e078a..575b4624e54a 100644
--- a/init/main.c
+++ b/init/main.c
@@ -494,7 +494,7 @@ asmlinkage void __init start_kernel(void)
debug_objects_early_init();
/*
- * Set up the the initial canary ASAP:
+ * Set up the initial canary ASAP:
*/
boot_init_stack_canary();
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 9019f15deab2..6e82ca9e2735 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -17,7 +17,7 @@
#ifdef HAVE_JUMP_LABEL
-/* mutex to protect coming/going of the the jump_label table */
+/* mutex to protect coming/going of the jump_label table */
static DEFINE_MUTEX(jump_label_mutex);
void jump_label_lock(void)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index be7c86bae576..88b2e602ad02 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2720,7 +2720,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
- * with as many of the the *youngest* kmsg records that fit into it.
+ * with as many of the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
diff --git a/kernel/smp.c b/kernel/smp.c
index bd9f94028838..22187cbf95ef 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -609,7 +609,7 @@ EXPORT_SYMBOL(on_each_cpu_mask);
* for all the required CPUs to finish. This may include the local
* processor.
* @cond_func: A callback function that is passed a cpu id and
- * the the info parameter. The function is called
+ * the info parameter. The function is called
* with preemption disabled. The function should
* return a blooean value indicating whether to IPI
* the specified CPU.
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index cc2f66f68dc5..04fb64169be9 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2874,7 +2874,7 @@ rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
* This function lets the user discard an event in the ring buffer
* and then that event will not be read later.
*
- * This function only works if it is called before the the item has been
+ * This function only works if it is called before the item has been
* committed. It will try to free the event from the ring buffer
* if another event has not been added behind it.
*
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 06f7e4fe8d2d..8fa2ad3b2a21 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -882,7 +882,7 @@ EXPORT_SYMBOL(bitmap_bitremap);
* read it, you're overqualified for your current job.)
*
* In other words, @orig is mapped onto (surjectively) @dst,
- * using the the map { <n, m> | the n-th bit of @relmap is the
+ * using the map { <n, m> | the n-th bit of @relmap is the
* m-th set bit of @relmap }.
*
* Any set bits in @orig above bit number W, where W is the
diff --git a/lib/dynamic_queue_limits.c b/lib/dynamic_queue_limits.c
index 0777c5a45fa0..2ad6fc394f07 100644
--- a/lib/dynamic_queue_limits.c
+++ b/lib/dynamic_queue_limits.c
@@ -60,7 +60,7 @@ void dql_completed(struct dql *dql, unsigned int count)
* the whole interval (the check above).
*
* If there is slack, the amount of execess data queued above
- * the the amount needed to prevent starvation, the queue limit
+ * the amount needed to prevent starvation, the queue limit
* can be decreased. To avoid hysteresis we consider the
* minimum amount of slack found over several iterations of the
* completion routine.
diff --git a/lib/earlycpio.c b/lib/earlycpio.c
index 3eb3e4722b8e..9d4da0a6a6ed 100644
--- a/lib/earlycpio.c
+++ b/lib/earlycpio.c
@@ -50,7 +50,7 @@ enum cpio_fields {
/**
* cpio_data find_cpio_data - Search for files in an uncompressed cpio
* @path: The directory to search for, including a slash at the end
- * @data: Pointer to the the cpio archive or a header inside
+ * @data: Pointer to the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @nextoff: When a matching file is found, this is the offset from the
* beginning of the cpio to the beginning of the next file, not the
diff --git a/lib/syscall.c b/lib/syscall.c
index 58710eefeac8..90fc637eff76 100644
--- a/lib/syscall.c
+++ b/lib/syscall.c
@@ -31,7 +31,7 @@ static int collect_syscall(struct task_struct *target, long *callno,
* @pc: filled with user PC
*
* If @target is blocked in a system call, returns zero with *@callno
- * set to the the call's number and @args filled in with its arguments.
+ * set to the call's number and @args filled in with its arguments.
* Registers not used for system call arguments may not be available and
* it is not kosher to use &struct user_regset calls while the system
* call is still in progress. Note we may get this result if @target
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index dee6cf4e6d34..e4665e8df41e 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1137,7 +1137,7 @@ static void return_unused_surplus_pages(struct hstate *h,
* evenly across all nodes with memory. Iterate across these nodes
* until we can no longer free unreserved surplus pages. This occurs
* when the nodes with surplus pages have no free pages.
- * free_pool_huge_page() will balance the the freed pages across the
+ * free_pool_huge_page() will balance the freed pages across the
* on-line nodes with memory and will handle the hstate accounting.
*/
while (nr_pages--) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 580a5f075ed0..7c205648391d 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4108,7 +4108,7 @@ static int __meminit zone_batchsize(struct zone *zone)
* locking.
*
* Any new users of pcp->batch and pcp->high should ensure they can cope with
- * those fields changing asynchronously (acording the the above rule).
+ * those fields changing asynchronously (according to the above rule).
*
* mutex_is_locked(&pcp_batch_high_lock) required when calling this function
* outside of boot time (or some other assurance that no concurrent updaters
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index ba5366c320da..60e1d50d5617 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -765,7 +765,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
return 0;
}
-/* Encrypt the the link */
+/* Encrypt the link */
static void hci_conn_encrypt(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 6ccc4eb9e55e..4b1cd624dbb8 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1257,7 +1257,7 @@ static void hci_init3_req(struct hci_request *req, unsigned long opt)
* Delete Stored Link Key command. They are clearly indicating its
* absence in the bit mask of supported commands.
*
- * Check the supported commands and only if the the command is marked
+ * Check the supported commands and only if the command is marked
* as supported send it. If not supported assume that the controller
* does not have actual support for stored link keys which makes this
* command redundant anyway.
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index f2044fcb9dd1..4a8d5cc43f06 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -200,8 +200,8 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3;
max = asoc->frag_point;
- /* If the the peer requested that we authenticate DATA chunks
- * we need to account for bundling of the AUTH chunks along with
+ /* If the peer requested that we authenticate DATA chunks
+ * we need to accound for bundling of the AUTH chunks along with
* DATA.
*/
if (sctp_auth_send_cid(SCTP_CID_DATA, asoc)) {
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index ed04869b2d4f..99e14bb88952 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -184,7 +184,7 @@ void rpc_destroy_generic_auth(void)
}
/*
- * Test the the current time (now) against the underlying credential key expiry
+ * Test the current time (now) against the underlying credential key expiry
* minus a timeout and setup notification.
*
* The normal case:
diff --git a/net/tipc/link.c b/net/tipc/link.c
index 69cd9bf3f561..1114acd3df10 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -833,7 +833,7 @@ int tipc_link_send_buf(struct tipc_link *l_ptr, struct sk_buff *buf)
/*
* tipc_link_send(): same as tipc_link_send_buf(), but the link to use has
- * not been selected yet, and the the owner node is not locked
+ * not been selected yet, and the owner node is not locked
* Called by TIPC internal users, e.g. the name distributor
*/
int tipc_link_send(struct sk_buff *buf, u32 dest, u32 selector)
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 403078d670a9..b21863009913 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
* @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
* %WIMAX_RF_OFF radio off.
*
- * Reports changes in the software RF switch state to the the WiMAX
+ * Reports changes in the software RF switch state to the WiMAX
* stack.
*
* The main use is during initialization, so the driver can query the
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index db40fa04cd51..9eb8c74b69a1 100644
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in
kernel/trace/trace_functions.c
The resulted trace is processed into a tree to produce a more human
view of the call stack by drawing textual but hierarchical tree of
-calls. Only the functions's names and the the call time are provided.
+calls. Only the functions's names and the call time are provided.
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
index 3064c6ced87c..7b9769e7985a 100644
--- a/security/apparmor/context.c
+++ b/security/apparmor/context.c
@@ -13,7 +13,7 @@
* License.
*
*
- * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * AppArmor sets confinement on every task, via the aa_task_cxt and
* the aa_task_cxt.profile, both of which are required and are not allowed
* to be NULL. The aa_task_cxt is not reference counted and is unique
* to each cred (which is reference count). The profile pointed to by
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index cee72ce64222..a3f339164361 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -459,7 +459,7 @@ error:
* keyring, otherwise replace the link to the matching key with a link to the
* new key.
*
- * The key must grant the caller Link permission and the the keyring must grant
+ * The key must grant the caller Link permission and the keyring must grant
* the caller Write permission. Furthermore, if an additional link is created,
* the keyring's quota will be extended.
*
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 69178c4f4113..99aa6fb13d2d 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -4994,7 +4994,7 @@ EXPORT_SYMBOL_HDA(snd_hda_power_save);
* @nid: NID to check / update
*
* Check whether the given NID is in the amp list. If it's in the list,
- * check the current AMP status, and update the the power-status according
+ * check the current AMP status, and update the power-status according
* to the mute status.
*
* This function is supposed to be set or called from the check_power_status
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 088a5afbd1b9..92ff5e680e51 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -859,7 +859,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec,
static struct snd_kcontrol_new beep_vol_ctl =
HDA_CODEC_VOLUME(NULL, 0, 0, 0);
- /* check for mute support for the the amp */
+ /* check for mute support for the amp */
if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
const struct snd_kcontrol_new *temp;
if (spec->anabeep_nid == nid)
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index e610339f7601..6f8e5638a703 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -31,7 +31,7 @@
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
- * sampling rate. That means the the FPGA doubles the
+ * sampling rate. That means that the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index acea8927905b..64835c2b12a6 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -695,7 +695,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int source)
u64 Kpart;
unsigned int K, Ndiv, Nmod, target;
- /* The the PLL output is always 98.304MHz. */
+ /* The PLL output is always 98.304MHz. */
target = 98304000;
/* If the input frequency is over 14.4MHz then scale it down. */
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index fb9bb9eb5ca3..a2e6df5dd576 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -171,7 +171,7 @@ static void fsl_dma_abort_stream(struct snd_pcm_substream *substream)
/**
* fsl_dma_update_pointers - update LD pointers to point to the next period
*
- * As each period is completed, this function changes the the link
+ * As each period is completed, this function changes the link
* descriptor pointers for that period to point to the next period.
*/
static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 35e277379b86..beaa6ec35b62 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -1013,7 +1013,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
}
}
- /* Initialize the the device_attribute structure */
+ /* Initialize the device_attribute structure */
dev_attr = &ssi_private->dev_attr;
sysfs_attr_init(&dev_attr->attr);
dev_attr->attr.name = "statistics";
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index eee7afcae375..a28b953c904e 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -615,7 +615,7 @@ A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. The DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index fdfceee0ffd0..29b9bcd9d3ab 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -180,7 +180,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
- period being the hist entry period value
- - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option
+ - WEIGHT-A/WEIGHT-B being user suplied weights in the '-c' option
behind ':' separator like '-c wdiff:1,2'.
- WIEGHT-A being the weight of the data file
- WIEGHT-B being the weight of the baseline data file
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index b4ddb748356c..7e8aa3fe7ba7 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -35,9 +35,9 @@ The \fB-c MSR#\fP option includes the delta of the specified 32-bit MSR counter.
.PP
The \fB-C MSR#\fP option includes the delta of the specified 64-bit MSR counter.
.PP
-The \fB-m MSR#\fP option includes the the specified 32-bit MSR value.
+The \fB-m MSR#\fP option includes the specified 32-bit MSR value.
.PP
-The \fB-M MSR#\fP option includes the the specified 64-bit MSR value.
+The \fB-M MSR#\fP option includes the specified 64-bit MSR value.
.PP
The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
The default is 5 seconds.
diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
index fd7e9e9d6f4a..1aa7faa0e0e0 100644
--- a/tools/thermal/tmon/pid.c
+++ b/tools/thermal/tmon/pid.c
@@ -38,7 +38,7 @@
/**************************************************************************
* PID (Proportional-Integral-Derivative) controller is commonly used in
- * linear control system, consider the the process.
+ * linear control system, consider the process.
* G(s) = U(s)/E(s)
* kp = proportional gain
* ki = integral gain
--
1.8.3.2
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2013-12-09 10:36 ` [PATCH][RESEND] [TRIVIAL] " Michael Opdenacker
@ 2014-03-05 5:52 ` Michael Opdenacker
2014-03-05 5:55 ` Michael Opdenacker
2014-10-01 9:53 ` Michael Opdenacker
0 siblings, 2 replies; 35+ messages in thread
From: Michael Opdenacker @ 2014-03-05 5:52 UTC (permalink / raw)
To: trivial; +Cc: arend, linux-kernel, Michael Opdenacker
Fix all occurrences of "the the " in the source code,
comments and documentation.
The replacement couldn't be automated because sometimes
the first "the" was meant to be another word.
Example: "according the the"
meaning: "according to the"
Note that I sometimes took the opportunity to fix
other spelling issues or typos in the same sentences.
I also fixed a few checkpatch errors in the same
lines.
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
---
Documentation/ABI/testing/sysfs-devices-memory | 2 +-
Documentation/DocBook/media/v4l/controls.xml | 2 +-
Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
Documentation/devicetree/bindings/arm/msm/timer.txt | 2 +-
Documentation/devicetree/bindings/ata/cavium-compact-flash.txt | 2 +-
Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt | 2 +-
Documentation/devicetree/bindings/mtd/fsmc-nand.txt | 2 +-
Documentation/filesystems/autofs4-mount-control.txt | 6 +++---
Documentation/futex-requeue-pi.txt | 2 +-
Documentation/input/multi-touch-protocol.txt | 2 +-
Documentation/kmemcheck.txt | 2 +-
Documentation/memory-barriers.txt | 2 +-
Documentation/networking/spider_net.txt | 2 +-
Documentation/phy.txt | 2 +-
Documentation/power/devices.txt | 2 +-
Documentation/security/Smack.txt | 2 +-
Documentation/trace/ring-buffer-design.txt | 2 +-
Documentation/usb/WUSB-Design-overview.txt | 2 +-
Documentation/virtual/kvm/api.txt | 2 +-
Documentation/vm/unevictable-lru.txt | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/unwind.h | 2 +-
arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
arch/arm/mach-pxa/stargate2.c | 2 +-
arch/blackfin/mach-common/entry.S | 2 +-
arch/c6x/platforms/cache.c | 2 +-
arch/ia64/include/asm/spinlock.h | 2 +-
arch/ia64/include/asm/uv/uv_hub.h | 2 +-
arch/m68k/platform/coldfire/intc-2.c | 2 +-
arch/metag/kernel/process.c | 2 +-
arch/microblaze/kernel/entry.S | 2 +-
arch/mips/alchemy/devboards/pm.c | 2 +-
arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
arch/mips/include/asm/spinlock.h | 2 +-
arch/mips/kernel/smtc.c | 2 +-
arch/mips/kvm/kvm_mips.c | 2 +-
arch/mips/mm/c-octeon.c | 4 ++--
arch/mips/netlogic/xlr/fmn.c | 2 +-
arch/powerpc/include/asm/cache.h | 2 +-
arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
arch/powerpc/kernel/head_64.S | 2 +-
arch/powerpc/mm/gup.c | 2 +-
arch/powerpc/mm/hugetlbpage.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/platforms/chrp/setup.c | 2 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
arch/s390/kernel/perf_cpum_sf.c | 2 +-
arch/s390/mm/gup.c | 2 +-
arch/sparc/kernel/pci.c | 2 +-
arch/sparc/mm/gup.c | 2 +-
arch/tile/include/asm/irqflags.h | 2 +-
arch/tile/include/gxio/trio.h | 2 +-
arch/tile/kernel/single_step.c | 2 +-
arch/x86/include/asm/spinlock.h | 2 +-
arch/x86/include/asm/uv/uv_hub.h | 2 +-
arch/x86/kvm/x86.c | 2 +-
arch/x86/mm/gup.c | 4 ++--
arch/x86/xen/setup.c | 2 +-
arch/xtensa/include/asm/initialize_mmu.h | 2 +-
arch/xtensa/kernel/entry.S | 4 ++--
drivers/acpi/acpica/accommon.h | 2 +-
drivers/acpi/acpica/tbfadt.c | 2 +-
drivers/block/drbd/drbd_main.c | 2 +-
drivers/char/apm-emulation.c | 2 +-
drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
drivers/cpuidle/driver.c | 2 +-
drivers/crypto/picoxcell_crypto.c | 2 +-
drivers/crypto/ux500/hash/hash_core.c | 2 +-
drivers/gpio/gpio-ich.c | 2 +-
drivers/gpu/drm/i915/i915_gem.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 4 ++--
drivers/gpu/drm/radeon/atombios.h | 4 ++--
drivers/gpu/drm/radeon/r300_reg.h | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 2 +-
drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
drivers/gpu/drm/radeon/radeon_gart.c | 2 +-
drivers/hv/channel.c | 4 ++--
drivers/hv/vmbus_drv.c | 2 +-
drivers/hwmon/pmbus/ucd9200.c | 2 +-
drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
drivers/infiniband/hw/qib/qib.h | 2 +-
drivers/input/mouse/gpio_mouse.c | 2 +-
drivers/input/touchscreen/atmel_mxt_ts.c | 2 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
drivers/lguest/core.c | 2 +-
drivers/media/dvb-frontends/tda1002x.h | 2 +-
drivers/media/dvb-frontends/tda10048.c | 2 +-
drivers/media/pci/cx88/cx88-dsp.c | 2 +-
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/saa7164/saa7164-core.c | 2 +-
drivers/media/platform/davinci/vpbe.c | 2 +-
drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
drivers/media/usb/dvb-usb/friio.c | 2 +-
drivers/media/usb/dvb-usb/friio.h | 2 +-
drivers/media/usb/gspca/finepix.c | 2 +-
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/memory/emif.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/mfd/db8500-prcmu.c | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/ubi/ubi.h | 4 ++--
drivers/mtd/ubi/wl.c | 2 +-
drivers/net/ethernet/calxeda/xgmac.c | 2 +-
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +-
drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
drivers/net/wimax/i2400m/i2400m.h | 4 ++--
drivers/net/wimax/i2400m/rx.c | 2 +-
drivers/net/wimax/i2400m/tx.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/wcn36xx/hal.h | 6 +++---
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++--
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 ++--
drivers/net/wireless/ti/wl1251/acx.h | 2 +-
drivers/of/base.c | 2 +-
drivers/pci/hotplug/acpiphp_glue.c | 2 +-
drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
drivers/power/power_supply_sysfs.c | 5 +++--
drivers/rtc/rtc-rs5c372.c | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 6 +++---
drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++--
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/remote_device.h | 2 +-
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/spi/spi-ppc4xx.c | 2 +-
drivers/staging/android/binder.h | 2 +-
drivers/staging/android/ion/ion.c | 2 +-
drivers/staging/et131x/et131x.c | 2 +-
drivers/staging/lustre/lustre/llite/file.c | 2 +-
drivers/staging/lustre/lustre/ptlrpc/pinger.c | 2 +-
drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c | 4 ++--
drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/rtl8712/rtl871x_cmd.c | 2 +-
drivers/staging/sep/sep_main.c | 6 +++---
drivers/staging/tidspbridge/include/dspbridge/drv.h | 4 ++--
drivers/staging/tidspbridge/pmgr/dev.c | 2 +-
drivers/staging/wlags49_h2/README.wlags49 | 2 +-
drivers/target/target_core_alua.c | 4 ++--
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/mos7720.c | 2 +-
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/uwb/drp-ie.c | 2 +-
drivers/video/omap/sossi.c | 2 +-
drivers/video/sis/sis_accel.c | 2 +-
fs/autofs4/dev-ioctl.c | 2 +-
fs/btrfs/dev-replace.c | 2 +-
fs/btrfs/send.c | 2 +-
fs/btrfs/tree-log.c | 2 +-
fs/dcache.c | 4 ++--
fs/ecryptfs/keystore.c | 2 +-
fs/ext2/ext2.h | 2 +-
fs/ext4/inline.c | 4 ++--
fs/f2fs/segment.h | 2 +-
fs/kernfs/file.c | 2 +-
fs/ocfs2/localalloc.c | 2 +-
fs/xfs/xfs_export.c | 2 +-
include/drm/drm_rect.h | 2 +-
include/linux/mm.h | 2 +-
include/linux/moduleparam.h | 2 +-
include/linux/skbuff.h | 2 +-
include/net/caif/caif_layer.h | 2 +-
include/net/ip6_fib.h | 2 +-
include/net/wimax.h | 2 +-
init/main.c | 2 +-
kernel/jump_label.c | 2 +-
kernel/printk/printk.c | 2 +-
kernel/smp.c | 2 +-
kernel/trace/ring_buffer.c | 2 +-
lib/bitmap.c | 2 +-
lib/dynamic_queue_limits.c | 2 +-
lib/earlycpio.c | 2 +-
lib/syscall.c | 2 +-
mm/hugetlb.c | 2 +-
mm/page_alloc.c | 2 +-
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/hci_core.c | 2 +-
net/sctp/chunk.c | 4 ++--
net/sunrpc/auth_generic.c | 2 +-
net/tipc/link.c | 2 +-
net/wimax/op-rfkill.c | 2 +-
scripts/tracing/draw_functrace.py | 2 +-
security/apparmor/context.c | 2 +-
security/keys/keyctl.c | 2 +-
sound/pci/hda/hda_codec.c | 2 +-
sound/pci/hda/patch_sigmatel.c | 2 +-
sound/pci/ice1712/prodigy192.c | 2 +-
sound/soc/codecs/wm9713.c | 2 +-
sound/soc/fsl/fsl_dma.c | 2 +-
sound/sparc/dbri.c | 2 +-
tools/perf/Documentation/perf-diff.txt | 2 +-
tools/power/x86/turbostat/turbostat.8 | 4 ++--
tools/thermal/tmon/pid.c | 2 +-
220 files changed, 254 insertions(+), 253 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index 7405de26ee60..4b3c0208d0a5 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -45,7 +45,7 @@ Description:
The file /sys/devices/system/memory/memoryX/state
is read-write. When read, its contents show the
online/offline state of the memory section. When written,
- root can toggle the the online/offline state of a removable
+ root can toggle the online/offline state of a removable
memory section (see removable file description above)
using the following commands.
# echo online > /sys/devices/system/memory/memoryX/state
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index a5a3188e5af7..37bc6784432d 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3344,7 +3344,7 @@ giving priority to the center of the metered area.</entry>
<row>
<entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant> </entry>
<entry>A multi-zone metering. The light intensity is measured
-in several points of the frame and the the results are combined. The
+in several points of the frame and the results are combined. The
algorithm of the zones selection and their significance in calculating the
final value is device dependent.</entry>
</row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
index f4e28e7d4751..721728745407 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
@@ -267,7 +267,7 @@ is intended for still imaging applications. The idea is to get the
best possible image quality that the hardware can deliver. It is not
defined how the driver writer may achieve that; it will depend on the
hardware and the ingenuity of the driver writer. High quality mode is
-a different mode from the the regular motion video capture modes. In
+a different mode from the regular motion video capture modes. In
high quality mode:<itemizedlist>
<listitem>
<para>The driver may be able to capture higher
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
index c6ef8f13dc7e..74607b6c1117 100644
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -8,7 +8,7 @@ Properties:
"qcom,kpss-timer" - krait subsystem
"qcom,scss-timer" - scorpion subsystem
-- interrupts : Interrupts for the the debug timer, the first general purpose
+- interrupts : Interrupts for the debug timer, the first general purpose
timer, and optionally a second general purpose timer in that
order.
diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
index 93986a5a8018..3bacc8e0931e 100644
--- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
+++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -9,7 +9,7 @@ Properties:
Compatibility with many Cavium evaluation boards.
-- reg: The base address of the the CF chip select banks. Depending on
+- reg: The base address of the CF chip select banks. Depending on
the device configuration, there may be one or two banks.
- cavium,bus-width: The width of the connection to the CF devices. Valid
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
index d63194a2c848..ada4e2973323 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
@@ -39,7 +39,7 @@ Optional Properties:
- lines-initial-states: Bitmask that specifies the initial state of each
line. When a bit is set to zero, the corresponding line will be initialized to
the input (pulled-up) state. When the bit is set to one, the line will be
- initialized the the low-level output state. If the property is not specified
+ initialized the low-level output state. If the property is not specified
all lines will be initialized to the input state.
The I/O expander can detect input state changes, and thus optionally act as
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index ec42935f3908..5235cbc551b0 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -9,7 +9,7 @@ Required properties:
Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width
defaults to 1 byte
-- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+- nand-skip-bbtscan: Indicates the BBT scanning should be skipped
- timings: array of 6 bytes for NAND timings. The meanings of these bytes
are:
byte 0 TCLR : CLE to RE delay in number of AHB clock cycles, only 4 bits
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index 4c95935cbcf4..e54896427b4a 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -255,7 +255,7 @@ AUTOFS_DEV_IOCTL_OPENMOUNT and AUTOFS_DEV_IOCTL_CLOSEMOUNT
Obtain and release a file descriptor for an autofs managed mount point
path. The open call requires an initialized struct autofs_dev_ioctl with
-the the path field set and the size field adjusted appropriately as well
+the path field set and the size field adjusted appropriately as well
as the arg1 field set to the device number of the autofs mount. The
device number can be obtained from the mount options shown in
/proc/mounts. The close call requires an initialized struct
@@ -373,7 +373,7 @@ variation uses the path and optionally arg1 set to an autofs mount type.
The call returns 1 if this is a mount point and sets arg1 to the device
number of the mount and field arg2 to the relevant super block magic
number (described below) or 0 if it isn't a mountpoint. In both cases
-the the device number (as returned by new_encode_dev()) is returned
+the device number (as returned by new_encode_dev()) is returned
in field arg1.
If supplied with a file descriptor we're looking for a specific mount,
@@ -387,7 +387,7 @@ is one or 0 if it isn't a mountpoint.
If a path is supplied (and the ioctlfd field is set to -1) then the path
is looked up and is checked to see if it is the root of a mount. If a
type is also given we are looking for a particular autofs mount and if
-a match isn't found a fail is returned. If the the located path is the
+a match isn't found a fail is returned. If the located path is the
root of a mount 1 is returned along with the super magic of the mount
or 0 otherwise.
diff --git a/Documentation/futex-requeue-pi.txt b/Documentation/futex-requeue-pi.txt
index 9dc1ff4fd536..31b16610c416 100644
--- a/Documentation/futex-requeue-pi.txt
+++ b/Documentation/futex-requeue-pi.txt
@@ -67,7 +67,7 @@ pthread_cond_wait_pi(cond, mutex)
lock(cond->__data.__lock);
} while(...)
unlock(cond->__data.__lock);
- /* the kernel acquired the the mutex for us */
+ /* the kernel acquired the mutex for us */
}
pthread_cond_broadcast_pi(cond)
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index de139b18184a..7b4f59c09ee2 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -372,7 +372,7 @@ simple scheme, which is compatible with earlier usage, is:
Rationale: We have no information about the orientation of the touching
ellipse, so approximate it with an inscribed circle instead. The tool
-ellipse should align with the the vector (T - C), so the diameter must
+ellipse should align with the vector (T - C), so the diameter must
increase with distance(T, C). Finally, assume that the touch diameter is
equal to the tool thickness, and we arrive at the formulas above.
diff --git a/Documentation/kmemcheck.txt b/Documentation/kmemcheck.txt
index 9398a501fdb9..a41bdebbe87b 100644
--- a/Documentation/kmemcheck.txt
+++ b/Documentation/kmemcheck.txt
@@ -541,7 +541,7 @@ initialized. This is the beginning of the struct:
92 } _sifields;
93 } siginfo_t;
-On 64-bit, the int is 4 bytes long, so it must the the union member that has
+On 64-bit, the int is 4 bytes long, so it must the union member that has
not been initialized. We can verify this using gdb:
$ gdb vmlinux
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 102dc19c4119..ddd2e0d1febc 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -1371,7 +1371,7 @@ code. Here are some examples of these sorts of optimizations:
process_message(msg);
}
- There is nothing to prevent the the compiler from transforming
+ There is nothing to prevent the compiler from transforming
process_level() to the following, in fact, this might well be a
win for single-threaded code:
diff --git a/Documentation/networking/spider_net.txt b/Documentation/networking/spider_net.txt
index 4b4adb8eb14f..b0b75f8463b3 100644
--- a/Documentation/networking/spider_net.txt
+++ b/Documentation/networking/spider_net.txt
@@ -73,7 +73,7 @@ Thus, in an idle system, the GDACTDPA, tail and head pointers will
all be pointing at the same descr, which should be "empty". All of the
other descrs in the ring should be "empty" as well.
-The show_rx_chain() routine will print out the the locations of the
+The show_rx_chain() routine will print out the locations of the
GDACTDPA, tail and head pointers. It will also summarize the contents
of the ring, starting at the tail pointer, and listing the status
of the descrs that follow.
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index ebff6ee52441..9f0e49fe595c 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -85,7 +85,7 @@ should contain the phy name as given in the dt data and in the case of
non-dt boot, it should contain the label of the PHY. The two
devm_phy_get associates the device with the PHY using devres on
successful PHY get. On driver detach, release function is invoked on
-the the devres data and devres data is freed. phy_optional_get and
+the devres data and devres data is freed. phy_optional_get and
devm_phy_optional_get should be used when the phy is optional. These
two functions will never return -ENODEV, but instead returns NULL when
the phy cannot be found.
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index a66c9821b5ce..47d46dff70f7 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -391,7 +391,7 @@ When resuming from freeze, standby or memory sleep, the phases are:
the resume methods. This generally involves undoing the actions of the
preceding suspend_late phase.
- 3 The resume methods should bring the the device back to its operating
+ 3 The resume methods should bring the device back to its operating
state, so that it can perform normal I/O. This generally involves
undoing the actions of the suspend phase.
diff --git a/Documentation/security/Smack.txt b/Documentation/security/Smack.txt
index 7a2d30c132e3..5ea996f21d6c 100644
--- a/Documentation/security/Smack.txt
+++ b/Documentation/security/Smack.txt
@@ -3,7 +3,7 @@
"Good for you, you've decided to clean the elevator!"
- The Elevator, from Dark Star
-Smack is the the Simplified Mandatory Access Control Kernel.
+Smack is the Simplified Mandatory Access Control Kernel.
Smack is a kernel based implementation of mandatory access
control that includes simplicity in its primary design goals.
diff --git a/Documentation/trace/ring-buffer-design.txt b/Documentation/trace/ring-buffer-design.txt
index 7d350b496585..ff747b6fa39b 100644
--- a/Documentation/trace/ring-buffer-design.txt
+++ b/Documentation/trace/ring-buffer-design.txt
@@ -683,7 +683,7 @@ against nested writers.
cmpxchg(tail_page, temp_page, next_page)
The above will update the tail page if it is still pointing to the expected
-page. If this fails, a nested write pushed it forward, the the current write
+page. If this fails, a nested write pushed it forward, the current write
does not need to push it.
diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt
index 4c5e37939344..1cd07c017cf6 100644
--- a/Documentation/usb/WUSB-Design-overview.txt
+++ b/Documentation/usb/WUSB-Design-overview.txt
@@ -25,7 +25,7 @@ updated content.
* Design-overview.txt-1.8
This code implements a Ultra Wide Band stack for Linux, as well as
-drivers for the the USB based UWB radio controllers defined in the
+drivers for the USB based UWB radio controllers defined in the
Wireless USB 1.0 specification (including Wireless USB host controller
and an Intel WiNET controller).
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 6cd63a9010fb..dce3d05b4823 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1462,7 +1462,7 @@ struct kvm_lapic_state {
char regs[KVM_APIC_REG_SIZE];
};
-Copies the input argument into the the Local APIC registers. The data format
+Copies the input argument into the Local APIC registers. The data format
and layout are the same as documented in the architecture manual.
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index a68db7692ee8..441dd2266531 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -453,7 +453,7 @@ putback_lru_page() function to add migrated pages back to the LRU.
mmap(MAP_LOCKED) SYSTEM CALL HANDLING
-------------------------------------
-In addition the the mlock()/mlockall() system calls, an application can request
+In addition to the mlock()/mlockall() system calls, an application can request
that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e25419817791..e31cac4c72e3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2048,7 +2048,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
+ appended to the device tree bootargs property.
endchoice
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index d1c3f3a71c94..4f697edd0bad 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -22,7 +22,7 @@
#ifndef __ASSEMBLY__
-/* Unwind reason code according the the ARM EABI documents */
+/* Unwind reason code according to the ARM EABI documents */
enum unwind_reason_code {
URC_OK = 0, /* operation completed successfully */
URC_CONTINUE_UNWIND = 8,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 42d81885c700..d8c81730a5b5 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -753,7 +753,7 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
}
/**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * _init_main_clk - get a struct clk * for the hwmod's main functional clk
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
@@ -791,7 +791,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
}
/**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
@@ -835,7 +835,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
}
/**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 01de542432a6..6f92e75b6c35 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -423,7 +423,7 @@ static void __init imote2_stargate2_init(void)
}
#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
+/* As the imote2 doesn't currently have a conventional SD slot
* there is no option to hotplug cards, making all this rather simple
*/
static int imote2_mci_get_ro(struct device *dev)
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 86b5a095c5a1..9c8612385e00 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -480,7 +480,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
#ifdef CONFIG_EXACT_HWERR
/* Make sure all pending read/writes complete. This will ensure any
* accesses which could cause hardware errors completes, and signal
- * the the hardware before we do something silly, like crash the
+ * the hardware before we do something silly, like crash the
* kernel. We don't need to work around anomaly 05000312, since
* we are already atomic
*/
diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c
index 86318a16a252..dc21f94aaaaf 100644
--- a/arch/c6x/platforms/cache.c
+++ b/arch/c6x/platforms/cache.c
@@ -437,7 +437,7 @@ void __init c6x_cache_init(void)
if (!cache_base)
return;
- /* Set L2 caches on the the whole L2 SRAM memory */
+ /* Set L2 caches on the whole L2 SRAM memory */
L2_cache_set_mode(L2MODE_SIZE);
/* Enable L1 */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 45698cd15b7b..bd6ea40f3ef9 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -23,7 +23,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
* The pad bits in the middle are used to prevent the next_ticket number
* overflowing into the now_serving number.
*
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index 53e9dfacd073..3ea4168f28f7 100644
--- a/arch/ia64/include/asm/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -257,7 +257,7 @@ static inline int uv_numa_blade_id(void)
return 0;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return 0;
diff --git a/arch/m68k/platform/coldfire/intc-2.c b/arch/m68k/platform/coldfire/intc-2.c
index 995093357c59..f74f0e473119 100644
--- a/arch/m68k/platform/coldfire/intc-2.c
+++ b/arch/m68k/platform/coldfire/intc-2.c
@@ -7,7 +7,7 @@
* family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
* controllers, and the 547x and 548x families which have only one of them.
*
- * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * The external 7 fixed interrupts are part of the Edge Port unit of these
* ColdFire parts. They can be configured as level or edge triggered.
*
* (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff986a23..30052da1f1a4 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -211,7 +211,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
/*
* Get a pointer to where the new child's register block should have
* been pushed.
- * The Meta's stack grows upwards, and the context is the the first
+ * The Meta's stack grows upwards, and the context is the first
* thing to be pushed by TBX (phew)
*/
*childregs = *current_pt_regs();
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 0536bc021cc6..b417be09196d 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -445,7 +445,7 @@ TRAP_return: /* Make global symbol for debugging */
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look like the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index b86bff31d1d3..6363d3c93496 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -16,7 +16,7 @@
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
* is to trigger a wakeup.
*/
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index df69bfd2b006..4ec669f5b0d4 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index)
* offsetof() to determine the offsets into packet headers.
* For example, offsetof(ethhdr, protocol) returns the offset
* of the ethernet protocol field. The bitmask selects which
- * bytes to include the the tag, with bit offset X selecting
+ * bytes to include in the tag, with bit offset X selecting
* byte at offset X from the beginning of the packet data.
* @len: Number of bytes to include. Usually this is the sizeof()
* the field.
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index 78d201fb6c87..b6f41f6b6c70 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -31,7 +31,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*/
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index dfc1b911be04..cfde409cf48d 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -908,7 +908,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
if ((tcstatus & TCSTATUS_IXMT) != 0) {
/*
- * If we're in the the irq-off version of the wait
+ * If we're in the irq-off version of the wait
* loop, we need to force exit from the wait and
* do a direct post of the IPI.
*/
diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c
index da5186fbd77a..931c28e0cc62 100644
--- a/arch/mips/kvm/kvm_mips.c
+++ b/arch/mips/kvm/kvm_mips.c
@@ -1197,7 +1197,7 @@ int __init kvm_mips_init(void)
/* On MIPS, kernel modules are executed from "mapped space", which requires TLBs.
* The TLB handling code is statically linked with the rest of the kernel (kvm_tlb.c)
* to avoid the possibility of double faulting. The issue is that the TLB code
- * references routines that are part of the the KVM module,
+ * references routines that are part of the KVM module,
* which are only available once the module is loaded.
*/
kvm_mips_gfn_to_pfn = gfn_to_pfn;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index f41a5c5b0865..4d7d5f93196d 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -348,7 +348,7 @@ static void co_cache_error_call_notifiers(unsigned long val)
}
/*
- * Called when the the exception is recoverable
+ * Called when the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -357,7 +357,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
}
/**
- * Called when the the exception is not recoverable
+ * Called when the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d428e8471eec..1d1eb1e10ae2 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -144,7 +144,7 @@ void xlr_percpu_fmn_init(void)
* For sending FMN messages, we need credits on the destination
* bucket. Program the credits this core has on the 128 possible
* destination buckets.
- * We cannot use a loop here, because the the first argument has
+ * We cannot use a loop here, because the first argument has
* to be a constant integer value.
*/
COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index ed0afc1e44a4..9f87f92a06a7 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -45,7 +45,7 @@ extern struct ppc64_caches ppc64_caches;
/*
* For a snooping icache, we still need a dummy icbi to purge all the
* prefetched instructions from the ifetch buffers. We also need a sync
- * before the icbi to order the the actual stores to memory that might
+ * before the icbi to order the actual stores to memory that might
* have modified instructions with the icbi.
*/
#define PURGE_PREFETCHED_INS \
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index 334459ad145b..b3219b0ca2c4 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -246,7 +246,7 @@ static inline unsigned int ev_int_get_mask(unsigned int interrupt,
* ev_int_eoi - signal the end of interrupt processing
* @interrupt: the interrupt number
*
- * This function signals the end of processing for the the specified
+ * This function signals the end of processing for the specified
* interrupt, which must be the interrupt currently in service. By
* definition, this is also the highest-priority interrupt.
*
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index eb0f4ac75c4c..091791030ee6 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -30,7 +30,7 @@ struct arch_hw_breakpoint {
u16 len; /* length of the target data symbol */
};
-/* Note: Don't change the the first 6 bits below as they are in the same order
+/* Note: Don't change the first 6 bits below as they are in the same order
* as the dabr and dabrx.
*/
#define HW_BRK_TYPE_READ 0x01
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index b7363bd42452..46270ba350ca 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -95,7 +95,7 @@ __secondary_hold_acknowledge:
#ifdef CONFIG_RELOCATABLE
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
- * is used by kexec-tools to keep the the kdump kernel in the
+ * is used by kexec-tools to keep the kdump kernel in the
* crash_kernel region. The loader is responsible for
* observing the alignment requirement.
*/
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index c5f734e20b0f..575aeee9da40 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -155,7 +155,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on powerpc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index eb923654ba80..7ea2326ac096 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -943,7 +943,7 @@ void flush_dcache_icache_hugepage(struct page *page)
* (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table
*
* So long as we atomically load page table pointers we are safe against teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 692998244d2c..a2ce00831362 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -9,7 +9,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * This file is a driver for the the General Purpose Timer (gpt) devices
+ * This file is a driver for the General Purpose Timer (gpt) devices
* found on the MPC5200 SoC. Each timer has an IO pin which can be used
* for GPIO or can be used to raise interrupts. The timer function can
* be used independently from the IO pin, or it can be used to control
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index c665d7de6c99..baeb4df3fb28 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -251,7 +251,7 @@ static void briq_restart(char *cmd)
* Per default, input/output-device points to the keyboard/screen
* If no card is installed, the built-in serial port is used as a fallback.
* But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
- * the the built-in serial node. Instead, a /failsafe node is created.
+ * to the built-in serial node. Instead, a /failsafe node is created.
*/
static void chrp_init_early(void)
{
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 3b2b4fb3585b..5cd2247922fb 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1011,7 +1011,7 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
/*
* This function is supposed to be called on basis of PE from top
- * to bottom style. So the the I/O or MMIO segment assigned to
+ * to bottom style. So the I/O or MMIO segment assigned to
* parent PE could be overrided by its child PEs if necessary.
*/
static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index 6c0d29827cb6..02332e7df680 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1128,7 +1128,7 @@ static void debug_sample_entry(struct hws_combined_entry *sample,
* combined-sampling data entry consists of a basic- and a diagnostic-sampling
* data entry. The sampling function is determined by the flags in the perf
* event hardware structure. The function always works with a combined-sampling
- * data entry but ignores the the diagnostic portion if it is not available.
+ * data entry but ignores the diagnostic portion if it is not available.
*
* Note that the implementation focuses on basic-sampling data entries and, if
* such an entry is not valid, the entire combined-sampling data entry is
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 639fce464008..2f03d7badf95 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -187,7 +187,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* prevent the pagetables from being freed on s390.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 1555bbcae1ee..a285fa8a781f 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -305,7 +305,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
+ * firmware can sample the value before the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index c4d3da68b800..f3520cde45f1 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -189,7 +189,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on sparc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_disable();
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 71af5747874d..f7f64c80c5b2 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -116,7 +116,7 @@
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
* Likewise, INTCTRL_K is removed and re-added during device
- * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * interrupts, as is the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
* to know our current state.
diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h
index df10a662cc25..50a3d5cbad20 100644
--- a/arch/tile/include/gxio/trio.h
+++ b/arch/tile/include/gxio/trio.h
@@ -206,7 +206,7 @@ typedef struct {
/* Initialize a TRIO context.
*
* This function allocates a TRIO "service domain" and maps the MMIO
- * registers into the the caller's VA space.
+ * registers into the caller's VA space.
*
* @param trio_index Which TRIO shim; Gx36 must pass 0.
* @param context Context object to be initialized.
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index de07fa7d1315..c554ffbb50f7 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -277,7 +277,7 @@ P("\n");
/*
* Called after execve() has started the new image. This allows us
- * to reset the info state. Note that the the mmap'ed memory, if there
+ * to reset the info state. Note that the mmap'ed memory, if there
* was any, has already been unmapped by the exec.
*/
void single_step_execve(void)
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index bf156ded74b5..59213c3b0053 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -72,7 +72,7 @@ static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*
* We use an xadd covering *both* parts of the lock, to increment the tail and
* also load the position of the head, which takes care of memory ordering
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index a30836c8ac4d..d81914578c9b 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -522,7 +522,7 @@ static inline int uv_numa_blade_id(void)
return uv_hub_info->numa_blade_id;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return uv_cpu_to_blade[cpu];
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 2b8578432d5b..e707950721c5 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7059,7 +7059,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
if (current->mm == kvm->mm) {
/*
* Free memory regions allocated on behalf of userspace,
- * unless the the memory map has changed due to process exit
+ * unless the memory map has changed due to process exit
* or fd copying.
*/
struct kvm_userspace_memory_region mem;
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 207d9aef662d..a1f84cebb9aa 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -288,7 +288,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
@@ -360,7 +360,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_disable();
pgdp = pgd_offset(mm, addr);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 0982233b9b84..5e287146a028 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -481,7 +481,7 @@ char * __init xen_memory_setup(void)
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
- * We tried to make the the memblock_reserve more selective so
+ * We tried to make the memblock_reserve more selective so
* that it would be clear what region is reserved. Sadly we ran
* in the problem wherein on a 64-bit hypervisor with a 32-bit
* initial domain, the pt_base has the cr3 value which is not
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 600781edc8a3..2e1d20d0b71f 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -6,7 +6,7 @@
* For the new V3 MMU we remap the TLB from virtual == physical
* to the standard Linux mapping used in earlier MMU's.
*
- * The the MMU we also support a new configuration register that
+ * In the MMU we also support a new configuration register that
* specifies how the S32C1I instruction operates with the cache
* controller.
*
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index ef7f4990722b..c774c03804ea 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
* of the proper size instead.
*
* This algorithm simply backs out the register changes started by the user
- * excpetion handler, makes it appear that we have started a window underflow
+ * exception handler, makes it appear that we have started a window underflow
* by rotating the window back and then setting the old window base (OWB) in
* the 'ps' register with the rolled back window base. The 'movsp' instruction
* will be re-executed and this time since the next window frames is in the
* active AR registers it won't cause an exception.
*
* If the WindowUnderflow code gets a TLB miss the page will get mapped
- * the the partial windeowUnderflow will be handeled in the double exception
+ * and the partial windeowUnderflow will be handeled in the double exception
* handler.
*
* Entry condition:
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 8a6c4a0d22db..90fe27f6f156 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -47,7 +47,7 @@
/*
* Common set of includes for all ACPICA source files.
* We put them here because we don't want to duplicate them
- * in the the source code again and again.
+ * in the source code again and again.
*
* Note: The order of these include files is important.
*/
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 8f89263ac47e..29fe407604ed 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -423,7 +423,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
* The 64-bit X fields are optional extensions to the original 32-bit FADT
* V1.0 fields. Even if they are present in the FADT, they are optional and
* are unused if the BIOS sets them to zero. Therefore, we must copy/expand
- * 32-bit V1.0 fields to the 64-bit X fields if the the 64-bit X field is
+ * 32-bit V1.0 fields to the 64-bit X fields if the 64-bit X field is
* originally zero.
*
* For ACPI 1.0 FADTs (that contain no 64-bit addresses), all 32-bit address
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 929468e1512a..99f82dba8e28 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -2703,7 +2703,7 @@ enum drbd_ret_code conn_new_minor(struct drbd_tconn *tconn, unsigned int minor,
}
add_disk(disk);
- kref_init(&mdev->kref); /* one ref for both idrs and the the add_disk */
+ kref_init(&mdev->kref); /* one ref for both idrs and the add_disk */
/* inherit the connection state */
mdev->state.conn = tconn->cstate;
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index dd9dfa15e9d1..d086acf9562f 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -563,7 +563,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
wake_up_interruptible(&apm_waitqueue);
/*
- * Wait for the the suspend_acks_pending variable to drop to
+ * Wait for the suspend_acks_pending variable to drop to
* zero, meaning everybody acked the suspend event (or the
* process was killed.)
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 02225eb19cf6..619f3a30ec55 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -111,7 +111,7 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
}
/**
- * fifo_icap_set_read_size - Set the the size register.
+ * fifo_icap_set_read_size - Set the size register.
* @drvdata: a pointer to the drvdata.
* @data: the size of the following read transaction, in words.
**/
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index 06dbe7c86199..482b2cbb2ee9 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -168,7 +168,7 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv)
/*
* Look for the timer stop flag in the different states, so that we know
* if the broadcast timer has to be set up. The loop is in the reverse
- * order, because usually one of the deeper states have this flag set.
+ * order, because usually one of the deeper states has this flag set.
*/
for (i = drv->state_count - 1; i >= 0 ; i--) {
if (drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP) {
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index a6175ba6d238..f61829284324 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -53,7 +53,7 @@
#define CMD0_IRQ_THRESHOLD 1
/*
- * The timeout period (in jiffies) for a PDU. When the the number of PDUs in
+ * The timeout period (in jiffies) for a PDU. When the number of PDUs in
* flight is greater than the STAT_IRQ_THRESHOLD or 0 the timer is disabled.
* When there are packets in flight but lower than the threshold, we enable
* the timer and at expiry, attempt to remove any processed packets from the
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 1c73f4fbc252..2f2a4276a014 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -435,7 +435,7 @@ static int hash_get_device_data(struct hash_ctx *ctx,
* @keylen: The lengt of the key.
*
* Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the the hw design spec. Either due to incorrect info in the
+ * specified in the hw design spec. Either due to incorrect info in the
* spec or due to a bug in the hw.
*/
static void hash_hw_write_key(struct hash_device_data *device_data,
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index f5bf3c38bca6..472477fa1bf2 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -399,7 +399,7 @@ static int ichx_gpio_probe(struct platform_device *pdev)
/*
* If necessary, determine the I/O address of ACPI/power management
- * registers which are needed to read the the GPE0 register for GPI pins
+ * registers which are needed to read the GPE0 register for GPI pins
* 0 - 15 on some chipsets.
*/
if (!ichx_priv.desc->uses_gpe0)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 00c836154725..0b88e5e9a5b8 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2174,7 +2174,7 @@ int __i915_add_request(struct intel_ring_buffer *ring,
/* Whilst this request exists, batch_obj will be on the
* active_list, and so will hold the active reference. Only when this
- * request is retired will the the batch_obj be moved onto the
+ * request is retired will the batch_obj be moved onto the
* inactive_list and lose its active reference. Hence we do not need
* to explicitly hold another reference here.
*/
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 4c1672809493..faded9cf2d98 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2244,7 +2244,7 @@ void intel_display_handle_reset(struct drm_device *dev)
* will get its events and not get stuck.
*
* Also update the base address of all primary
- * planes to the the last fb to make sure we're
+ * planes to the last fb to make sure we're
* showing the correct fb after a reset.
*
* Need to make two loops over the crtcs so that we
@@ -9687,7 +9687,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
}
/* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
+ * update the output configuration. */
intel_modeset_update_state(dev, prepare_pipes);
if (dev_priv->display.modeset_global_resources)
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 92be50c39ffd..2be3040b28f1 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -2802,8 +2802,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t
ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 00c0d2ba22d3..36af5f14f622 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -353,7 +353,7 @@
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index b012cbbc3ed5..553fb5569835 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -326,7 +326,7 @@ void radeon_doorbell_free(struct radeon_device *rdev, u32 doorbell)
/*
* radeon_wb_*()
- * Writeback is the the method by which the the GPU updates special pages
+ * Writeback is the method by which the GPU updates special pages
* in memory with the status of certain GPU events (fences, ring pointers,
* etc.).
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index c37cb79a9489..546685c06513 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -45,7 +45,7 @@
* for GPU/CPU synchronization. When the fence is written,
* it is expected that all buffers associated with that fence
* are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed. Whether
+ * that the relevant GPU caches have been flushed. Whether
* we use a scratch register or memory location depends on the asic
* and whether writeback is enabled.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index a8f9b463bf2a..27fc4ff71c66 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -406,7 +406,7 @@ void radeon_gart_fini(struct radeon_device *rdev)
* (uncached system pages).
* Each VM has an ID associated with it and there is a page table
* associated with each VMID. When execting a command buffer,
- * the kernel tells the the ring what VMID to use for that command
+ * the kernel tells the ring what VMID to use for that command
* buffer. VMIDs are allocated dynamically as commands are submitted.
* The userspace drivers maintain their own address space and the kernel
* sets up their pages tables accordingly when they submit their
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 69ea36f07b4d..c71e2fea645e 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -544,7 +544,7 @@ EXPORT_SYMBOL_GPL(vmbus_close);
* vmbus_sendpacket() - Send the specified buffer on the given channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @requestid: Identifier of the request
* @type: Type of packet that is being send e.g. negotiate, time
* packet etc.
@@ -719,7 +719,7 @@ EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
* vmbus_recvpacket() - Retrieve the user packet on the specified channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @buffer_actual_len: The actual size of the data after it was received
* @requestid: Identifier of the request
*
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 077bb1bdac34..58d0886589bf 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -886,7 +886,7 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the IRQ information
+ * VMBUS is an acpi enumerated device. Get the IRQ information
* from DSDT.
*/
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index 033d6aca47d3..d41d7e3bf31c 100644
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -117,7 +117,7 @@ static int ucd9200_probe(struct i2c_client *client,
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
- * for the the phases of the rail.
+ * for the phases of the rail.
*/
for (i = 0; i < info->pages; i++) {
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 28cfe97cf1e9..231b54591e2b 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -87,7 +87,7 @@
* These 3 values (SDR and DDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
+ * are also the possible values for ipath_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define IPATH_IB_SDR 1
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index 1946101419a3..1adecf0d2eb9 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -333,7 +333,7 @@ struct qib_verbs_txreq {
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for qib_link_speed_enabled and active
+ * are also the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 8c7d94200bdb..c1418e619f0c 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -17,7 +17,7 @@
/*
* Timer function which is run every scan_ms ms when the device is opened.
- * The dev input variable is set to the the input_dev pointer.
+ * The dev input variable is set to the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_polled_dev *dev)
{
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index a70400754e92..56ea22d275a6 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1016,7 +1016,7 @@ static int mxt_load_fw(struct device *dev, const char *fn)
frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
- /* We should add 2 at frame size as the the firmware data is not
+ /* We should add 2 at frame size as the firmware data is not
* included the CRC bytes.
*/
frame_size += 2;
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 114f3bcba1b0..24c15bfb2199 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1566,7 +1566,7 @@ reset_hfcsusb(struct hfcsusb *hw)
write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
((hw->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 0bf1e4edf04d..def8b3511e59 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -205,7 +205,7 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
/*:*/
/*H:030
- * Let's jump straight to the the main loop which runs the Guest.
+ * Let's jump straight to the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
* going around and around until something interesting happens.
*/
diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h
index e404b6e44802..ce0fb855c705 100644
--- a/drivers/media/dvb-frontends/tda1002x.h
+++ b/drivers/media/dvb-frontends/tda1002x.h
@@ -1,6 +1,6 @@
/*
TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index 71fb63299de7..17534ff576ca 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1134,7 +1134,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
state->pll_pfactor = 0;
}
- /* Establish any defaults the the user didn't pass */
+ /* Establish any defaults the user didn't pass */
tda10048_establish_defaults(&state->frontend);
/* Set the xtal and freq defaults */
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..1f8820f5f8c0 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -37,7 +37,7 @@
(compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
/* We calculate the baseband frequencies of the carrier and the pilot tones
- * based on the the sampling rate of the audio rds fifo. */
+ * based on the sampling rate of the audio rds fifo. */
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index 2ad65eb29832..00e0818abfc9 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -555,7 +555,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f)
reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94);
/* Okay, we've wasted time working out the correct value,
- but if we use it, it fouls the the window alignment.
+ but if we use it, it fouls the window alignment.
Fudge it to what we want... */
reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16));
reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16));
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 1bf06970ca3e..ab627dfd7b28 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -636,7 +636,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
}
/* Check that the hardware is accessible. If the status bytes are
- * 0xFF then the device is not accessible, the the IRQ belongs
+ * 0xFF then the device is not accessible, the IRQ belongs
* to another driver.
* 4 x u32 interrupt registers.
*/
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 33b9660b7f77..6ea16e20449d 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -316,7 +316,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
* vpbe_get_output - Get output
* @vpbe_dev - vpbe device ptr
*
- * return current vpbe output to the the index
+ * return current vpbe output to the index
*/
static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
{
diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 8a712ca91d11..2a7e4a79f2b9 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -505,7 +505,7 @@ static int fimc_capture_open(struct file *file)
if (ret == 0 && vc->user_subdev_api && vc->inh_sensor_ctrls) {
/*
- * Recreate controls of the the video node to drop
+ * Recreate controls of the video node to drop
* any controls inherited from the sensor subdev.
*/
fimc_ctrls_delete(vc->ctx);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 5807185262fe..22a51a39969d 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1706,7 +1706,7 @@ void omap3isp_print_status(struct isp_device *isp)
* To solve this problem power management support is split into prepare/complete
* and suspend/resume operations. The pipelines are stopped in prepare() and the
* ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
- * resume(), and the the pipelines are restarted in complete().
+ * resume(), and the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not modelled explicitly
* yet.
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index d56f927fc31a..b5d2e805380d 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 474a17e4db0c..4c7f8fed8046 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h
index 0f461ca10cb9..82d19dcdebc0 100644
--- a/drivers/media/usb/dvb-usb/friio.h
+++ b/drivers/media/usb/dvb-usb/friio.h
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
index 52bdb569760b..414c1b752911 100644
--- a/drivers/media/usb/gspca/finepix.c
+++ b/drivers/media/usb/gspca/finepix.c
@@ -143,7 +143,7 @@ again:
* for, then it's the end of the
* frame. Sometimes the jpeg is not complete,
* but there's nothing we can do. We also end
- * here if the the jpeg ends right at the end
+ * here if the jpeg ends right at the end
* of the frame. */
gspca_frame_add(gspca_dev, LAST_PACKET,
data, len);
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 1ccaaddaa307..e43f8629436b 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1313,7 +1313,7 @@ static int tm6000_usb_probe(struct usb_interface *interface,
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
-/* check if the the device has the iso in endpoint at the correct place */
+/* check if the device has the iso in endpoint at the correct place */
if (!dev->isoc_in.endp) {
printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
rc = -ENODEV;
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 898c208889cd..41b96bae155b 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -992,7 +992,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
}
/* Synchronize to the input stream by waiting for the FID bit to be
- * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE.
* stream->last_fid is initialized to -1, so the first isochronous
* frame will always be in sync.
*
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 04644e7b42b1..303b322756c7 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -373,7 +373,7 @@ static const struct lpddr2_addressing *get_addressing_table(
}
/*
- * Find the the right timing table from the array of timing
+ * Find the right timing table from the array of timing
* tables of the device using DDR clock frequency
*/
static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 5653e505f91f..eb9640c39bf7 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
* @target: per target private data
* @sdev: SCSI device
*
- * Update the target negotiation parameters based on the the Inquiry
+ * Update the target negotiation parameters based on the Inquiry
* data, adapter capabilities, and NVRAM settings.
**/
static void
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index e43e6e821117..7845d26659c7 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -897,7 +897,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
- * This function sets the the operating point of the ARM.
+ * This function sets the operating point of the ARM.
*/
int db8500_prcmu_set_arm_opp(u8 opp)
{
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 913de07e577c..6482a9c4eb44 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -48,7 +48,7 @@
* kernel/user requirements.
*
* Blade percpu resources reserved for kernel use. These resources are
- * reserved whenever the the kernel context for the blade is loaded. Note
+ * reserved whenever the kernel context for the blade is loaded. Note
* that the kernel context is not guaranteed to be always available. It is
* loaded on demand & can be stolen by a user if the user demand exceeds the
* kernel demand. The kernel can always reload the kernel context but
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index b9e2000969f0..a90b40823cf2 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1594,7 +1594,7 @@ out_2:
* by xpc_notify_senders_of_disconnect_uv(), and to also get an
* error returned here will confuse them. Additionally, since
* in this case the channel is being disconnected we don't need
- * to put the the msg_slot back on the free list.
+ * to put the msg_slot back on the free list.
*/
if (cmpxchg(&msg_slot->func, func, NULL) != func) {
ret = xpSuccess;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index ca6369fe91ff..22b05ef4d8da 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -925,7 +925,7 @@ static uint8_t gpmi_read_byte(struct mtd_info *mtd)
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
- * because the the operations are the same.
+ * because the operations are the same.
*/
static void block_mark_swapping(struct gpmi_nand_data *this,
void *payload, void *auxiliary)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 8ea6297a208f..86cabd9cc166 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -253,7 +253,7 @@ struct ubi_fm_pool {
/**
* struct ubi_volume - UBI volume description data structure.
- * @dev: device object to make use of the the Linux device model
+ * @dev: device object to make use of the Linux device model
* @cdev: character device object to create character device
* @ubi: reference to the UBI device description object
* @vol_id: volume ID
@@ -381,7 +381,7 @@ struct ubi_debug_info {
/**
* struct ubi_device - UBI device description structure
- * @dev: UBI device object to use the the Linux device model
+ * @dev: UBI device object to use for the Linux device model
* @cdev: character device object to create character device
* @ubi_num: UBI device number
* @ubi_name: UBI device name
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 02317c1c0238..a4ee3a342303 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -722,7 +722,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
/**
* sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
- * @e: the the physical eraseblock to erase
+ * @e: the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
*
* This function returns zero in case of success and a negative error code in
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index d2a183c3a6ce..5bac38e716dd 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1234,7 +1234,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
* @budget : maximum number of packets that the current CPU can receive from
* all interfaces.
* Description :
- * This function implements the the reception process.
+ * This function implements the reception process.
* Also it runs the TX completion thread
*/
static int xgmac_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 2c109343d570..30e71efc0886 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -2477,7 +2477,7 @@ int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox,
* @data: len bytes to hold the data read
* @len: amount of data to read from window. Must be <=
* MEMWIN0_APERATURE after adjusting for 16B for T4 and
- * 128B for T5 alignment requirements of the the memory window.
+ * 128B for T5 alignment requirements of the memory window.
*
* Read len bytes of data from MC starting at @addr.
*/
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 04ac9c6a0d39..4b3fd1a6d163 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2238,7 +2238,7 @@ static irqreturn_t be_intx(int irq, void *dev)
}
be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- /* Return IRQ_HANDLED only for the the first spurious intr
+ /* Return IRQ_HANDLED only for the first spurious intr
* after a valid intr to stop the kernel from branding
* this irq as a bad one!
*/
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 2879b9631e15..0c988a290767 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -4068,7 +4068,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
* @hw: Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*/
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 42f0f6717511..6cb1e4eb591c 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3536,7 +3536,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
* @hw: pointer to the HW structure
*
* ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
- * register, so the the bus width is hard coded.
+ * register, so the bus width is hard coded.
**/
static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 06df6928f44c..4eda9cb57410 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2172,7 +2172,7 @@ out:
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 18076c4178b4..c2742b1d2c1e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -223,7 +223,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
struct pci_dev *pdev;
- /* determine whether to use the the parent device
+ /* determine whether to use the parent device
*/
if (ixgbe_pcie_from_parent(&adapter->hw))
pdev = adapter->pdev->bus->parent->self;
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 9eeddbd0b2c7..a3a4c1ccdd90 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2167,7 +2167,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
/*
* In PCI 33 mode, the P_PLL is not used, and therefore,
- * the the P_PLL_LOCK bit in the adapter_status register will
+ * the P_PLL_LOCK bit in the adapter_status register will
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 64b4639f43b6..39fe59db9e60 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -83,7 +83,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* returns: 0 on success, -ETIMEDOUT on a timeout
*
* Writes the value to the requested register by first writing the value
- * into MWD register. The the MCR register is then appropriately setup
+ * into MWD register. The MCR register is then appropriately setup
* to finish the write operation.
*/
static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 5a34e72bab9a..6113a29f01bc 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -250,14 +250,14 @@ struct i2400m_barker_db;
*
* @bus_setup: [optional fill] Function called by the bus-generic code
* [i2400m_setup()] to setup the basic bus-specific communications
- * to the the device needed to load firmware. See LIFE CYCLE above.
+ * to the device needed to load firmware. See LIFE CYCLE above.
*
* NOTE: Doesn't need to upload the firmware, as that is taken
* care of by the bus-generic code.
*
* @bus_release: [optional fill] Function called by the bus-generic
* code [i2400m_release()] to shutdown the basic bus-specific
- * communications to the the device needed to load firmware. See
+ * communications to the device needed to load firmware. See
* LIFE CYCLE above.
*
* This function does not need to reset the device, just tear down
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 0b602951ff6b..4466ee71d1e4 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -693,7 +693,7 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq,
* right spot where to insert the packet; we know the queue is
* not empty, so we are not the first ones; we also know we
* are not going to be the last ones. The list is sorted, so
- * we have to insert before the the first guy with an nsn_itr
+ * we have to insert before the first guy with an nsn_itr
* greater that our nsn. */
skb_queue_walk(&roq->queue, skb_itr) {
roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb;
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index f20886ade1cc..1f7b2b922fae 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -233,7 +233,7 @@
* i2400m_tx_skip_tail() Marks unusable FIFO tail space
* i2400m->bus_tx_kick()
*
- * Now i2400m->bus_tx_kick() is the the bus-specific driver backend
+ * Now i2400m->bus_tx_kick() is the bus-specific driver backend
* implementation; that would do:
*
* i2400m->bus_tx_kick()
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index 1c584c4b019c..f34f24d362ed 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -77,7 +77,7 @@ struct rx_attention {
* first_msdu is set.
*
* peer_idx_invalid
- * Indicates no matching entries within the the max search
+ * Indicates no matching entries within the max search
* count. Only set when first_msdu is set.
*
* peer_idx_timeout
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index 61f6b21fb0ae..cb15404bea71 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -98,7 +98,7 @@ struct bus_request {
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- * implemented using the asynchronous mode allowing the the bus
+ * implemented using the asynchronous mode allowing the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 7126bdd4236c..f3827982d51b 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1176,7 +1176,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
* Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
+ * response is available in the FIFO
*
* CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index 9a2afa2c690b..5184d6cbcb90 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -638,7 +638,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN,
AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT);
- /* on AR92xx, the highest bit of count will make the the chip send
+ /* on AR92xx, the highest bit of count will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 09facba1dc6d..0720b47fc588 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1629,7 +1629,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
- /* on AR93xx and newer, count = 0 will make the the chip send
+ /* on AR93xx and newer, count = 0 will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index 3c2ef0c32f72..965140b9f77b 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -1609,7 +1609,7 @@ struct wcn36xx_hal_config_bss_params {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -1746,7 +1746,7 @@ struct wcn36xx_hal_config_bss_params_v1 {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -3739,7 +3739,7 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
/* Length of the responce message */
u32 rsp_length;
- /* FIXME: Currently considering the the responce will be less than
+ /* FIXME: Currently considering that the responce will be less than
* 100bytes */
u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
} __packed;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 9417cb5a2553..a472c5c4096c 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3819,7 +3819,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
}
/*
- * Suspend the the MAC and update the slot timing
+ * Suspend the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index b674c2a2b51c..87fa91a77c7b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -195,7 +195,7 @@ enum iwl_tx_flags {
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
+ * @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @key: security key
* @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
@@ -546,7 +546,7 @@ struct iwl_beacon_notif {
/**
* enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
+ * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
index b7268c0b3333..e995f3939091 100644
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
@@ -65,7 +65,7 @@
#include "fw-api.h"
#include "mvm.h"
-/* Maps the driver specific channel width definition to the the fw values */
+/* Maps the driver specific channel width definition to the fw values */
static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
{
switch (chandef->width) {
@@ -86,7 +86,7 @@ static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
/*
* Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
+ * freq) definitions to the fw values
*/
static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
diff --git a/drivers/net/wireless/ti/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h
index 2bdec38699f4..bfe998947957 100644
--- a/drivers/net/wireless/ti/wl1251/acx.h
+++ b/drivers/net/wireless/ti/wl1251/acx.h
@@ -1243,7 +1243,7 @@ struct wl1251_acx_arp_filter {
u8 address[16]; /* The IP address used to filter ARP packets.
ARP packets that do not match this address are
dropped. When the IP Version is 4, the last 12
- bytes of the the address are ignored. */
+ bytes of the address are ignored. */
} __attribute__((packed));
struct wl1251_acx_ac_cfg {
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 89e888a78899..edde1cac9e00 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1804,7 +1804,7 @@ static void of_alias_add(struct alias_prop *ap, struct device_node *np,
* of_alias_scan - Scan all properties of 'aliases' node
*
* The function scans all the properties of 'aliases' node and populate
- * the the global lookup table with the properties. It returns the
+ * the global lookup table with the properties. It returns the
* number of alias_prop found, or error code in error case.
*
* @dt_alloc: An allocator that provides a virtual address to memory
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 7c7a388c85ab..d57f9dca0ffc 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -36,7 +36,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#define pr_fmt(fmt) "acpiphp_glue: " fmt
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
index 7dfef3ee5b53..40511e39cea5 100644
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ b/drivers/pcmcia/pxa2xx_hx4700.c
@@ -33,7 +33,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/*
* IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
* The asic3 default IRQ type is level trigger low level detect, exactly
- * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+ * the signal present on GPIOD4_CF_nCD when a CF card is inserted.
* If the IRQ type is not changed, the asic3 interrupt handler will loop
* repeatedly because it is unable to clear the level trigger interrupt.
*/
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 44420d1e9094..aa6d52ef8f3f 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -294,8 +294,9 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
ret = power_supply_show_property(dev, attr, prop_buf);
if (ret == -ENODEV || ret == -ENODATA) {
- /* When a battery is absent, we expect -ENODEV. Don't abort;
- send the uevent with at least the the PRESENT=0 property */
+ /* When a battery is absent, we expect -ENODEV.
+ * Don't abort; send the uevent with at least
+ * the PRESENT=0 property */
ret = 0;
continue;
}
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index ccf54f06396b..2108302cc965 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -122,7 +122,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
- * configurations, so we use the the first method there, stripping off
+ * configurations, so we use the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index c3a83df07894..c969518c4273 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3382,7 +3382,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 2035b0d64351..e62a7346428a 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1983,7 +1983,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
/*
* Device's PID has changed. We need to cleanup
* and re-login. If there is another device with
- * the the newly discovered pid, send an scn notice
+ * the newly discovered pid, send an scn notice
* so that its new pid can be discovered.
*/
list_for_each(qe, &rport->port->rport_q) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index f3170008ae71..854ac59389b8 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -510,7 +510,7 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
* @skb: The receive skb
* @netdev: The associated net device
* @ptype: The packet_type structure which was used to register this handler
- * @orig_dev: The original net_device the the skb was received on.
+ * @orig_dev: The original net_device that the skb was received on.
* (in case dev is a bond)
*
* Returns: 0 for success
@@ -2716,7 +2716,7 @@ module_exit(fcoe_exit);
* fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
* @seq: active sequence in the FLOGI or FDISC exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
@@ -2745,7 +2745,7 @@ done:
* fcoe_logo_resp() - FCoE specific LOGO response handler
* @seq: active sequence in the LOGO exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 34a1b1f333b4..65a53a9eb059 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -213,7 +213,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new)
* that doesn't have a priv (fcf was deleted). However,
* libfcoe will always delete FCFs before trying to add
* them. This is ensured because both recv_adv and
- * age_fcfs are protected by the the fcoe_ctlr's mutex.
+ * age_fcfs are protected by the fcoe_ctlr's mutex.
* This means that we should never get a FCF with a
* non-NULL priv pointer.
*/
@@ -694,7 +694,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
*
* The caller must check that the length is a multiple of 4.
* The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
- * The the skb must also be an fc_frame.
+ * The skb must also be an fc_frame.
*
* This is called from the lower-level driver with spinlocks held,
* so we must not take a mutex here.
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 4911310a38f5..cc2b2c0d22eb 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -244,7 +244,7 @@ enum sci_controller_states {
SCIC_INITIALIZED,
/**
- * This state indicates the the controller is in the process of becoming
+ * This state indicates that the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 47a013fffae7..07af745220eb 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete(
* permitted. This state is entered from the INITIAL state. This state
* is entered from the STOPPING state.
*
- * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * @SCI_DEV_STARTING: This state indicates that the remote device is in
* the process of becoming ready (i.e. starting). In this state no new
* IO operations are permitted. This state is entered from the STOPPED
* state.
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
index c7ee81d01125..f22950b12b8b 100644
--- a/drivers/scsi/isci/remote_node_context.h
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state {
/**
* struct sci_remote_node_context - This structure contains the data
* associated with the remote node context object. The remote node context
- * (RNC) object models the the remote device information necessary to manage
+ * (RNC) object models the remote device information necessary to manage
* the silicon RNC.
*/
struct sci_remote_node_context {
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 0d30ca849e8f..63da523e73a6 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -67,7 +67,7 @@
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
-* @ihost: host on which the the request was queued
+* @ihost: host on which the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 00656fc92b93..5da6568e2e50 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1654,7 +1654,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -1687,7 +1687,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -1820,7 +1820,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -1852,7 +1852,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 110445f0c58d..1ced9822c051 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5783,7 +5783,7 @@ reject_out:
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful, the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 883ea2d9f237..345ad3150ccf 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2014,7 +2014,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so that the round robin selection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
@@ -5705,7 +5705,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
}
/* This routine decrements the reference count for a ndlp structure. If the
- * count goes to 0, this indicates the the associated nodelist should be
+ * count goes to 0, this indicates that the associated nodelist should be
* freed. Returning 1 indicates the ndlp resource has been released; on the
* other hand, returning 0 indicates the ndlp resource has not been released
* yet.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 68c94cc85c35..dd1f6e9ead10 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3783,7 +3783,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelevant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 1f292e29d566..d9a9ddbf1771 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2265,7 +2265,7 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * that the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 8f580fda443f..3b47f86d01f8 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -16341,7 +16341,7 @@ out:
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 0a1296a87d66..051a475cbe10 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3255,7 +3255,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when HBA driver received the identify done event or initiate FIS received
* event(for SATA), it will invoke this function to notify the sas layer that
- * the sas toplogy has formed, please discover the the whole sas domain,
+ * the sas toplogy has formed, please discover the whole sas domain,
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 5ee56726f8d0..be2b89e0889c 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -355,7 +355,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
{
/*
* On all 4xx PPC's the SPI bus is shared/multiplexed with
- * the 2nd I2C bus. We need to enable the the SPI bus before
+ * the 2nd I2C bus. We need to enable the SPI bus before
* using it.
*/
diff --git a/drivers/staging/android/binder.h b/drivers/staging/android/binder.h
index cbe345168067..98161a5f0f1a 100644
--- a/drivers/staging/android/binder.h
+++ b/drivers/staging/android/binder.h
@@ -246,7 +246,7 @@ enum binder_driver_return_protocol {
BR_FAILED_REPLY = _IO('r', 17),
/*
- * The the last transaction (either a bcTRANSACTION or
+ * The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
};
diff --git a/drivers/staging/android/ion/ion.c b/drivers/staging/android/ion/ion.c
index 574066ff73f8..eb39183eb712 100644
--- a/drivers/staging/android/ion/ion.c
+++ b/drivers/staging/android/ion/ion.c
@@ -845,7 +845,7 @@ void ion_pages_sync_for_device(struct device *dev, struct page *page,
sg_set_page(&sg, page, size, 0);
/*
* This is not correct - sg_dma_address needs a dma_addr_t that is valid
- * for the the targeted device, but this works on the currently targeted
+ * for the targeted device, but this works on the currently targeted
* hardware.
*/
sg_dma_address(&sg) = page_to_phys(page);
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index e516bb69f3b4..fae0576da236 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -1237,7 +1237,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
/* Initialize the Space Available Register */
writel(0, &rxmac->space_avail);
- /* Initialize the the mif_ctrl register
+ /* Initialize the mif_ctrl register
* bit 3: Receive code error. One or more nibbles were signaled as
* errors during the reception of the packet. Clear this
* bit in Gigabit, set it in 100Mbit. This was derived
diff --git a/drivers/staging/lustre/lustre/llite/file.c b/drivers/staging/lustre/lustre/llite/file.c
index c12821aedc2f..1b6a3381f88c 100644
--- a/drivers/staging/lustre/lustre/llite/file.c
+++ b/drivers/staging/lustre/lustre/llite/file.c
@@ -351,7 +351,7 @@ int ll_file_release(struct inode *inode, struct file *file)
fd = LUSTRE_FPRIVATE(file);
LASSERT(fd != NULL);
- /* The last ref on @file, maybe not the the owner pid of statahead.
+ /* The last ref on @file, maybe not the owner pid of statahead.
* Different processes can open the same dir, "ll_opendir_key" means:
* it is me that should stop the statahead thread. */
if (S_ISDIR(inode->i_mode) && lli->lli_opendir_key == fd &&
diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
index 6dff502ce23e..e03515a29f24 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
@@ -443,7 +443,7 @@ struct timeout_item* ptlrpc_new_timeout(int time, enum timeout_event event,
}
/**
- * Register timeout event on the the pinger thread.
+ * Register timeout event on the pinger thread.
* Note: the timeout list is an sorted list with increased timeout value.
*/
static struct timeout_item*
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
index b522b57a2691..56b1b9caa0bc 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
@@ -216,7 +216,7 @@ ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
{
struct ieee80211_hdr_4addr *hdr;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
/* On the struct stats definition there is written that
@@ -486,7 +486,7 @@ int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
struct ieee80211_crypt_data *crypt = NULL;
int keyidx = 0;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index 82fe8c47a1de..8907927b05c4 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -960,7 +960,7 @@ _func_enter_;
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the connection. */
+ /* If the driver wants to use the bssid to create the connection. */
/* If not, we have to copy the connecting AP's MAC address to it so that */
/* the driver just has the bssid information for PMKIDList searching. */
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index e730ed64c0fe..5981ef17a520 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -926,7 +926,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
int i;
struct ieee80211_rxb *rxb = NULL;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.c b/drivers/staging/rtl8712/rtl871x_cmd.c
index c71c7e55bb36..5a371da34c08 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -535,7 +535,7 @@ u8 r8712_joinbss_cmd(struct _adapter *padapter, struct wlan_network *pnetwork)
memcpy(&psecuritypriv->authenticator_ie[1],
&psecnetwork->IEs[12], (256-1));
psecnetwork->IELength = 0;
- /* If the the driver wants to use the bssid to create the connection.
+ /* If the driver wants to use the bssid to create the connection.
* If not, we copy the connecting AP's MAC address to it so that
* the driver just has the bssid information for PMKIDList searching.
*/
diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
index 122614c4092b..51f43f0a1f9e 100644
--- a/drivers/staging/sep/sep_main.c
+++ b/drivers/staging/sep/sep_main.c
@@ -1206,7 +1206,7 @@ static int sep_lock_user_pages(struct sep_device *sep,
int error = 0;
u32 count;
int result;
- /* The the page of the end address of the user space buffer */
+ /* The page of the end address of the user space buffer */
u32 end_page;
/* The page of the start address of the user space buffer */
u32 start_page;
@@ -1405,7 +1405,7 @@ static int sep_lli_table_secure_dma(struct sep_device *sep,
{
int error = 0;
u32 count;
- /* The the page of the end address of the user space buffer */
+ /* The page of the end address of the user space buffer */
u32 end_page;
/* The page of the start address of the user space buffer */
u32 start_page;
@@ -1724,7 +1724,7 @@ static void *sep_shared_area_bus_to_virt(struct sep_device *sep,
* @num_table_entries: number of entries
* @table_data_size: total data size
*
- * Walk the the list of the print created tables and print all the data
+ * Walk the list of the print created tables and print all the data
*/
static void sep_debug_print_lli_tables(struct sep_device *sep,
struct sep_lli_entry *lli_table_ptr,
diff --git a/drivers/staging/tidspbridge/include/dspbridge/drv.h b/drivers/staging/tidspbridge/include/dspbridge/drv.h
index b0c7708321b2..ee44aaea6dee 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/drv.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/drv.h
@@ -253,7 +253,7 @@ extern int drv_get_dev_object(u32 index,
/*
* ======== drv_get_next_dev_object ========
* Purpose:
- * Returns the Ptr to the Next Device Object from the the List
+ * Returns the Ptr to the Next Device Object from the List
* Parameters:
* hdev_obj: Handle to the Device Object
* Requires:
@@ -269,7 +269,7 @@ extern u32 drv_get_next_dev_object(u32 hdev_obj);
/*
* ======== drv_get_next_dev_extension ========
* Purpose:
- * Returns the Ptr to the Next Device Extension from the the List
+ * Returns the Ptr to the Next Device Extension from the List
* Parameters:
* dev_extension: Handle to the Device Extension
* Requires:
diff --git a/drivers/staging/tidspbridge/pmgr/dev.c b/drivers/staging/tidspbridge/pmgr/dev.c
index 616dc1f63070..e678fb4f3bc3 100644
--- a/drivers/staging/tidspbridge/pmgr/dev.c
+++ b/drivers/staging/tidspbridge/pmgr/dev.c
@@ -897,7 +897,7 @@ int dev_get_dev_type(struct dev_object *dev_obj, u8 *dev_type)
*
* 1. All Bridge function pointers which are NULL; and
* 2. All function slots in the struct dev_object structure which have no
- * corresponding slots in the the Bridge's interface, because the Bridge
+ * corresponding slots in the Bridge's interface, because the Bridge
* is of an *older* version.
* Parameters:
* intf_fxns: Interface fxn Structure of the Bridge's Dev Object.
diff --git a/drivers/staging/wlags49_h2/README.wlags49 b/drivers/staging/wlags49_h2/README.wlags49
index f65acd6f5f54..368a22b32f23 100644
--- a/drivers/staging/wlags49_h2/README.wlags49
+++ b/drivers/staging/wlags49_h2/README.wlags49
@@ -396,7 +396,7 @@ Version 7.22 abg - July 28, 2004
TxKey=1
this configures eth1 to associate to the ESSID 'some_network' with
- encryption on, where the the first encryption key is 'net01' and the key to
+ encryption on, where the first encryption key is 'net01' and the key to
use for encryption is Key 1.
Note that this only works on Agere hardware which uses this driver. For
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index c3d9df6aaf5f..1202e1b3d332 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -410,8 +410,8 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
} else {
/*
- * Extract the RELATIVE TARGET PORT IDENTIFIER to identify
- * the Target Port in question for the the incoming
+ * Extact the RELATIVE TARGET PORT IDENTIFIER to identify
+ * the Target Port in question for the incoming
* SET_TARGET_PORT_GROUPS op.
*/
rtpi = get_unaligned_be16(ptr + 2);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 0ed64eb68e48..f2698d3544be 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1803,7 +1803,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
- * RExit to a disconnect state). If so, let the the driver know it's
+ * RExit to a disconnect state). If so, let the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED(temp) &&
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index bccb1223143a..175e3de16156 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -261,7 +261,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
* Cypress app note that describes this mechanism
- * states the the low-speed part can't handle more
+ * states that the low-speed part can't handle more
* than 800 bytes/sec, in which case 4800 baud is the
* safest speed for a part like that.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 4eb277225a77..116266bf5501 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -429,7 +429,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
}
/*
- * This is the the common top part of all parallel port callback operations that
+ * This is the common top part of all parallel port callback operations that
* send synchronous messages to the device. This implements convoluted locking
* that avoids two scenarios: (1) a port operation is called after usbserial
* has called our release function, at which point struct mos7715_parport has
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 3b959e83b28e..0fd9f4df6ebe 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -46,7 +46,7 @@
*
* ASSUMPTIONS:
*
- * - We use the the as device address the port number where it is
+ * - We use as device address the port number where it is
* connected (port 0 doesn't exist). For unauth, it is 128 + that.
*
* ROADMAP:
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
index b7d4f6b75eef..caa4cb40334d 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/uwb/drp-ie.c
@@ -262,7 +262,7 @@ int uwb_drp_ie_update(struct uwb_rsv *rsv)
* We are given a zone id and the MAS bitmap of bits that need to be set in
* this zone. Note that this zone may already have bits set and this only
* adds settings - we cannot simply assign the MAS bitmap contents to the
- * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * zone contents. We iterate over the bits (MAS) in the zone and set the
* bits that are set in the given MAS bitmap.
*/
static
diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
index d4e7684e7045..501bc08dc125 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/omap/sossi.c
@@ -370,7 +370,7 @@ static void sossi_set_bits_per_cycle(int bpc)
int bus_pick_count, bus_pick_width;
/*
- * We set explicitly the the bus_pick_count as well, although
+ * We set explicitly the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
diff --git a/drivers/video/sis/sis_accel.c b/drivers/video/sis/sis_accel.c
index ceb434c95c0d..9177b8056356 100644
--- a/drivers/video/sis/sis_accel.c
+++ b/drivers/video/sis/sis_accel.c
@@ -215,7 +215,7 @@ SiS310SubsequentScreenToScreenCopy(struct sis_video_info *ivideo, int src_x, int
* and destination blitting areas overlap and
* adapt the bitmap addresses synchronously
* if the coordinates exceed the valid range.
- * The the areas do not overlap, we do our
+ * If the areas do not overlap, we do our
* normal check.
*/
if((mymax - mymin) < height) {
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 3182c0e68b42..d9b336be8862 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -504,7 +504,7 @@ static int autofs_dev_ioctl_askumount(struct file *fp,
* located path is the root of a mount we return 1 along with
* the super magic of the mount or 0 otherwise.
*
- * In both cases the the device number (as returned by
+ * In both cases the device number (as returned by
* new_encode_dev()) is also returned.
*/
static int autofs_dev_ioctl_ismountpoint(struct file *fp,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index 564c92638b20..4ee3e9631753 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -809,7 +809,7 @@ int btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace)
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
- * not called and the the filesystem is remounted
+ * not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancelation is wanted.
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index 9dde9717c1b9..b664e593046d 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -3141,7 +3141,7 @@ verbose_printk("btrfs: process_recorded_refs %llu\n", sctx->cur_ino);
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
- * the the current inum. To handle this case, we create the
+ * than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 39d83da03e03..232ac25b75d2 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2583,7 +2583,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
mutex_unlock(&log_root_tree->log_mutex);
/*
- * nobody else is going to jump in and write the the ctree
+ * nobody else is going to jump in and write the ctree
* super here because the log_commit atomic below is protecting
* us. We must be called with a transaction handle pinning
* the running transaction open, so a full commit can't hop
diff --git a/fs/dcache.c b/fs/dcache.c
index 265e0ce9769c..62cd8a696a45 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1966,8 +1966,8 @@ EXPORT_SYMBOL(d_splice_alias);
* same inode, only the actual correct case is stored in the dcache for
* case-insensitive filesystems.
*
- * For a case-insensitive lookup match and if the the case-exact dentry
- * already exists in in the dcache, use it and return it.
+ * For a case-insensitive lookup match and if the case-exact dentry
+ * already exists in the dcache, use it and return it.
*
* If no entry exists with the exact case name, allocate new dentry with
* the exact case, and return the spliced entry.
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 4725a07f003c..bcdfbc7568d7 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -900,7 +900,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack {
* @filename: This function kmalloc's the memory for the filename
* @filename_size: This function sets this to the amount of memory
* kmalloc'd for the filename
- * @packet_size: This function sets this to the the number of octets
+ * @packet_size: This function sets this to the number of octets
* in the packet parsed
* @mount_crypt_stat: The mount-wide cryptographic context
* @data: The memory location containing the start of the tag 70
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index d9a17d0b124d..c9c6f2e5a0a0 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -51,7 +51,7 @@ struct ext2_block_alloc_info {
/*
* Was i_next_alloc_goal in ext2_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it is the physical block number of the block which was most-recently
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index 82edf5b93352..f97dd67b3501 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -276,7 +276,7 @@ static int ext4_create_inline_data(handle_t *handle,
len = 0;
}
- /* Insert the the xttr entry. */
+ /* Insert the xttr entry. */
i.value = value;
i.value_len = len;
@@ -832,7 +832,7 @@ out:
/*
* Prepare the write for the inline data.
- * If the the data can be written into the inode, we just read
+ * If the data can be written into the inode, we just read
* the page and make it uptodate, and start the journal.
* Otherwise read the page, makes it dirty so that it can be
* handle in writepages(the i_disksize update is left to the
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index 5731682d7516..9cfbad1658ae 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -147,7 +147,7 @@ struct seg_entry {
unsigned short valid_blocks; /* # of valid blocks */
unsigned char *cur_valid_map; /* validity bitmap of blocks */
/*
- * # of valid blocks and the validity bitmap stored in the the last
+ * # of valid blocks and the validity bitmap stored in the last
* checkpoint pack. This information is used by the SSR mode.
*/
unsigned short ckpt_valid_blocks;
diff --git a/fs/kernfs/file.c b/fs/kernfs/file.c
index dbf397bfdff2..d6781da2d22b 100644
--- a/fs/kernfs/file.c
+++ b/fs/kernfs/file.c
@@ -245,7 +245,7 @@ static ssize_t kernfs_fop_read(struct file *file, char __user *user_buf,
* There is no easy way for us to know if userspace is only doing a partial
* write, so we don't support them. We expect the entire buffer to come on
* the first write. Hint: if you're writing a value, first read the file,
- * modify only the the value you're changing, then write entire buffer
+ * modify only the value you're changing, then write entire buffer
* back.
*/
static ssize_t kernfs_fop_write(struct file *file, const char __user *user_buf,
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 044013455621..c0aa12bdb106 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -690,7 +690,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb,
/*
* Under certain conditions, the window slide code
* might have reduced the number of bits available or
- * disabled the the local alloc entirely. Re-check
+ * disabled the local alloc entirely. Re-check
* here and return -ENOSPC if necessary.
*/
status = -ENOSPC;
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index 1399e187d425..77a43bcad6f5 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -71,7 +71,7 @@ xfs_fs_encode_fh(
fileid_type = FILEID_INO32_GEN_PARENT;
/*
- * If the the filesystem may contain 64bit inode numbers, we need
+ * If the filesystem may contain 64bit inode numbers, we need
* to use larger file handles that can represent them.
*
* While we only allocate inodes that do not fit into 32 bits any
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index d1286297567b..1f6d6c3e195c 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -120,7 +120,7 @@ static inline int drm_rect_height(const struct drm_rect *r)
}
/**
- * drm_rect_visible - determine if the the rectangle is visible
+ * drm_rect_visible - determine if the rectangle is visible
* @r: rectangle whose visibility is returned
*
* RETURNS:
diff --git a/include/linux/mm.h b/include/linux/mm.h
index f28f46eade6a..0714799575cd 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -193,7 +193,7 @@ extern pgprot_t protection_map[16];
#define FAULT_FLAG_USER 0x80 /* The fault originated in userspace */
/*
- * vm_fault is filled by the the pagefault handler and passed to the vma's
+ * vm_fault is filled by the pagefault handler and passed to the vma's
* ->fault function. The vma's ->fault is responsible for returning a bitmask
* of VM_FAULT_xxx flags that give details about how the fault was handled.
*
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index c3eb102a9cc8..cf956c945ced 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -94,7 +94,7 @@ struct kparam_array
* ".") the kernel commandline parameter. Note that - is changed to _, so
* the user can use "foo-bar=1" even for variable "foo_bar".
*
- * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * @perm is 0 if the variable is not to appear in sysfs, or 0444
* for world-readable, 0644 for root-writable, etc. Note that if it
* is writable, you may need to use kparam_block_sysfs_write() around
* accesses (esp. charp, which can be kfreed when it changes).
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 3ebbbe7b6d05..29072e4634ea 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2601,7 +2601,7 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
* must call this function to return the skb back to the stack, with
* or without a timestamp.
*
- * @skb: clone of the the original outgoing packet
+ * @skb: clone of the original outgoing packet
* @hwtstamps: hardware time stamps, may be NULL if not available
*
*/
diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h
index 94e5ed64dc6d..e9a8d524ab06 100644
--- a/include/net/caif/caif_layer.h
+++ b/include/net/caif/caif_layer.h
@@ -184,7 +184,7 @@ struct cflayer {
* CAIF packet downwards in the stack.
* Packet handling rules:
* - The CAIF packet (cfpkt) ownership is passed to the
- * transmit function. This means that the the packet
+ * transmit function. This means that the packet
* cannot be accessed after passing it to the below
* layer using dn->transmit().
*
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index aca0c2709fd6..885ee67df5b0 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -100,7 +100,7 @@ struct rt6_info {
struct in6_addr rt6i_gateway;
/* Multipath routes:
- * siblings is a list of rt6_info that have the the same metric/weight,
+ * siblings is a list of rt6_info that have the same metric/weight,
* destination, but not the same gateway. nsiblings is just a cache
* to speed up lookup.
*/
diff --git a/include/net/wimax.h b/include/net/wimax.h
index 98498e1daa06..74602ef06494 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -43,7 +43,7 @@
*
* USAGE
*
- * Embed a `struct wimax_dev` at the beginning of the the device's
+ * Embed a `struct wimax_dev` at the beginning of the device's
* private structure, initialize and register it. For details, see
* `struct wimax_dev`s documentation.
*
diff --git a/init/main.c b/init/main.c
index eb03090cdced..a89ccec421de 100644
--- a/init/main.c
+++ b/init/main.c
@@ -490,7 +490,7 @@ asmlinkage void __init start_kernel(void)
debug_objects_early_init();
/*
- * Set up the the initial canary ASAP:
+ * Set up the initial canary ASAP:
*/
boot_init_stack_canary();
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 9019f15deab2..6e82ca9e2735 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -17,7 +17,7 @@
#ifdef HAVE_JUMP_LABEL
-/* mutex to protect coming/going of the the jump_label table */
+/* mutex to protect coming/going of the jump_label table */
static DEFINE_MUTEX(jump_label_mutex);
void jump_label_lock(void)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 4dae9cbe9259..e1fdae13b138 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2718,7 +2718,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
- * with as many of the the *youngest* kmsg records that fit into it.
+ * with as many of the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
diff --git a/kernel/smp.c b/kernel/smp.c
index ffee35bef179..d2856c079efa 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -569,7 +569,7 @@ EXPORT_SYMBOL(on_each_cpu_mask);
* for all the required CPUs to finish. This may include the local
* processor.
* @cond_func: A callback function that is passed a cpu id and
- * the the info parameter. The function is called
+ * the info parameter. The function is called
* with preemption disabled. The function should
* return a blooean value indicating whether to IPI
* the specified CPU.
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index fc4da2d97f9b..2f4d6896b1ed 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2881,7 +2881,7 @@ rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
* This function lets the user discard an event in the ring buffer
* and then that event will not be read later.
*
- * This function only works if it is called before the the item has been
+ * This function only works if it is called before the item has been
* committed. It will try to free the event from the ring buffer
* if another event has not been added behind it.
*
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 06f7e4fe8d2d..8fa2ad3b2a21 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -882,7 +882,7 @@ EXPORT_SYMBOL(bitmap_bitremap);
* read it, you're overqualified for your current job.)
*
* In other words, @orig is mapped onto (surjectively) @dst,
- * using the the map { <n, m> | the n-th bit of @relmap is the
+ * using the map { <n, m> | the n-th bit of @relmap is the
* m-th set bit of @relmap }.
*
* Any set bits in @orig above bit number W, where W is the
diff --git a/lib/dynamic_queue_limits.c b/lib/dynamic_queue_limits.c
index 0777c5a45fa0..2ad6fc394f07 100644
--- a/lib/dynamic_queue_limits.c
+++ b/lib/dynamic_queue_limits.c
@@ -60,7 +60,7 @@ void dql_completed(struct dql *dql, unsigned int count)
* the whole interval (the check above).
*
* If there is slack, the amount of execess data queued above
- * the the amount needed to prevent starvation, the queue limit
+ * the amount needed to prevent starvation, the queue limit
* can be decreased. To avoid hysteresis we consider the
* minimum amount of slack found over several iterations of the
* completion routine.
diff --git a/lib/earlycpio.c b/lib/earlycpio.c
index 3eb3e4722b8e..9d4da0a6a6ed 100644
--- a/lib/earlycpio.c
+++ b/lib/earlycpio.c
@@ -50,7 +50,7 @@ enum cpio_fields {
/**
* cpio_data find_cpio_data - Search for files in an uncompressed cpio
* @path: The directory to search for, including a slash at the end
- * @data: Pointer to the the cpio archive or a header inside
+ * @data: Pointer to the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @nextoff: When a matching file is found, this is the offset from the
* beginning of the cpio to the beginning of the next file, not the
diff --git a/lib/syscall.c b/lib/syscall.c
index 58710eefeac8..90fc637eff76 100644
--- a/lib/syscall.c
+++ b/lib/syscall.c
@@ -31,7 +31,7 @@ static int collect_syscall(struct task_struct *target, long *callno,
* @pc: filled with user PC
*
* If @target is blocked in a system call, returns zero with *@callno
- * set to the the call's number and @args filled in with its arguments.
+ * set to the call's number and @args filled in with its arguments.
* Registers not used for system call arguments may not be available and
* it is not kosher to use &struct user_regset calls while the system
* call is still in progress. Note we may get this result if @target
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index c01cb9fedb18..a87da19fc7a6 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1128,7 +1128,7 @@ static void return_unused_surplus_pages(struct hstate *h,
* evenly across all nodes with memory. Iterate across these nodes
* until we can no longer free unreserved surplus pages. This occurs
* when the nodes with surplus pages have no free pages.
- * free_pool_huge_page() will balance the the freed pages across the
+ * free_pool_huge_page() will balance the freed pages across the
* on-line nodes with memory and will handle the hstate accounting.
*/
while (nr_pages--) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index e3758a09a009..19c2b63dc228 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4142,7 +4142,7 @@ static int __meminit zone_batchsize(struct zone *zone)
* locking.
*
* Any new users of pcp->batch and pcp->high should ensure they can cope with
- * those fields changing asynchronously (acording the the above rule).
+ * those fields changing asynchronously (according to the above rule).
*
* mutex_is_locked(&pcp_batch_high_lock) required when calling this function
* outside of boot time (or some other assurance that no concurrent updaters
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index ba5366c320da..60e1d50d5617 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -765,7 +765,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
return 0;
}
-/* Encrypt the the link */
+/* Encrypt the link */
static void hci_conn_encrypt(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 5e8663c194c1..c57b7abeac23 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1300,7 +1300,7 @@ static void hci_init3_req(struct hci_request *req, unsigned long opt)
* Delete Stored Link Key command. They are clearly indicating its
* absence in the bit mask of supported commands.
*
- * Check the supported commands and only if the the command is marked
+ * Check the supported commands and only if the command is marked
* as supported send it. If not supported assume that the controller
* does not have actual support for stored link keys which makes this
* command redundant anyway.
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index 158701da2d31..c13e0636ea44 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -199,8 +199,8 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3;
max = asoc->frag_point;
- /* If the the peer requested that we authenticate DATA chunks
- * we need to account for bundling of the AUTH chunks along with
+ /* If the peer requested that we authenticate DATA chunks
+ * we need to accound for bundling of the AUTH chunks along with
* DATA.
*/
if (sctp_auth_send_cid(SCTP_CID_DATA, asoc)) {
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index ed04869b2d4f..99e14bb88952 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -184,7 +184,7 @@ void rpc_destroy_generic_auth(void)
}
/*
- * Test the the current time (now) against the underlying credential key expiry
+ * Test the current time (now) against the underlying credential key expiry
* minus a timeout and setup notification.
*
* The normal case:
diff --git a/net/tipc/link.c b/net/tipc/link.c
index da6018beb6eb..90ff97da567f 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -798,7 +798,7 @@ int tipc_link_send_buf(struct tipc_link *l_ptr, struct sk_buff *buf)
/*
* tipc_link_send(): same as tipc_link_send_buf(), but the link to use has
- * not been selected yet, and the the owner node is not locked
+ * not been selected yet, and the owner node is not locked
* Called by TIPC internal users, e.g. the name distributor
*/
int tipc_link_send(struct sk_buff *buf, u32 dest, u32 selector)
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 403078d670a9..b21863009913 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
* @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
* %WIMAX_RF_OFF radio off.
*
- * Reports changes in the software RF switch state to the the WiMAX
+ * Reports changes in the software RF switch state to the WiMAX
* stack.
*
* The main use is during initialization, so the driver can query the
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index db40fa04cd51..9eb8c74b69a1 100644
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in
kernel/trace/trace_functions.c
The resulted trace is processed into a tree to produce a more human
view of the call stack by drawing textual but hierarchical tree of
-calls. Only the functions's names and the the call time are provided.
+calls. Only the functions's names and the call time are provided.
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
index 3064c6ced87c..7b9769e7985a 100644
--- a/security/apparmor/context.c
+++ b/security/apparmor/context.c
@@ -13,7 +13,7 @@
* License.
*
*
- * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * AppArmor sets confinement on every task, via the aa_task_cxt and
* the aa_task_cxt.profile, both of which are required and are not allowed
* to be NULL. The aa_task_cxt is not reference counted and is unique
* to each cred (which is reference count). The profile pointed to by
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index cee72ce64222..a3f339164361 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -459,7 +459,7 @@ error:
* keyring, otherwise replace the link to the matching key with a link to the
* new key.
*
- * The key must grant the caller Link permission and the the keyring must grant
+ * The key must grant the caller Link permission and the keyring must grant
* the caller Write permission. Furthermore, if an additional link is created,
* the keyring's quota will be extended.
*
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index dafcf82139e2..f5ce58e9182c 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -5060,7 +5060,7 @@ EXPORT_SYMBOL_GPL(snd_hda_power_save);
* @nid: NID to check / update
*
* Check whether the given NID is in the amp list. If it's in the list,
- * check the current AMP status, and update the the power-status according
+ * check the current AMP status, and update the power-status according
* to the mute status.
*
* This function is supposed to be set or called from the check_power_status
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 3bc29c9b2529..53a686b96a6e 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -879,7 +879,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec,
static struct snd_kcontrol_new beep_vol_ctl =
HDA_CODEC_VOLUME(NULL, 0, 0, 0);
- /* check for mute support for the the amp */
+ /* check for mute support for the amp */
if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
const struct snd_kcontrol_new *temp;
if (spec->anabeep_nid == nid)
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index e610339f7601..6f8e5638a703 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -31,7 +31,7 @@
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
- * sampling rate. That means the the FPGA doubles the
+ * sampling rate. That means that the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index acea8927905b..64835c2b12a6 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -695,7 +695,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int source)
u64 Kpart;
unsigned int K, Ndiv, Nmod, target;
- /* The the PLL output is always 98.304MHz. */
+ /* The PLL output is always 98.304MHz. */
target = 98304000;
/* If the input frequency is over 14.4MHz then scale it down. */
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index 6bb0ea59284f..61ba3f6d42e6 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -164,7 +164,7 @@ static void fsl_dma_abort_stream(struct snd_pcm_substream *substream)
/**
* fsl_dma_update_pointers - update LD pointers to point to the next period
*
- * As each period is completed, this function changes the the link
+ * As each period is completed, this function changes the link
* descriptor pointers for that period to point to the next period.
*/
static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private)
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index eee7afcae375..a28b953c904e 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -615,7 +615,7 @@ A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. The DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index fdfceee0ffd0..29b9bcd9d3ab 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -180,7 +180,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
- period being the hist entry period value
- - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option
+ - WEIGHT-A/WEIGHT-B being user suplied weights in the '-c' option
behind ':' separator like '-c wdiff:1,2'.
- WIEGHT-A being the weight of the data file
- WIEGHT-B being the weight of the baseline data file
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index b4ddb748356c..7e8aa3fe7ba7 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -35,9 +35,9 @@ The \fB-c MSR#\fP option includes the delta of the specified 32-bit MSR counter.
.PP
The \fB-C MSR#\fP option includes the delta of the specified 64-bit MSR counter.
.PP
-The \fB-m MSR#\fP option includes the the specified 32-bit MSR value.
+The \fB-m MSR#\fP option includes the specified 32-bit MSR value.
.PP
-The \fB-M MSR#\fP option includes the the specified 64-bit MSR value.
+The \fB-M MSR#\fP option includes the specified 64-bit MSR value.
.PP
The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
The default is 5 seconds.
diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
index fd7e9e9d6f4a..1aa7faa0e0e0 100644
--- a/tools/thermal/tmon/pid.c
+++ b/tools/thermal/tmon/pid.c
@@ -38,7 +38,7 @@
/**************************************************************************
* PID (Proportional-Integral-Derivative) controller is commonly used in
- * linear control system, consider the the process.
+ * linear control system, consider the process.
* G(s) = U(s)/E(s)
* kp = proportional gain
* ki = integral gain
--
1.8.3.2
^ permalink raw reply related [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-03-05 5:52 ` [PATCH] [RESEND][TRIVIAL] " Michael Opdenacker
@ 2014-03-05 5:55 ` Michael Opdenacker
2014-03-11 12:25 ` Michael Opdenacker
2014-10-01 9:53 ` Michael Opdenacker
1 sibling, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2014-03-05 5:55 UTC (permalink / raw)
To: trivial; +Cc: arend, linux-kernel, Michael Opdenacker
On 03/05/2014 06:52 AM, Michael Opdenacker wrote:
> Fix all occurrences of "the the " in the source code,
> comments and documentation.
>
> The replacement couldn't be automated because sometimes
> the first "the" was meant to be another word.
>
> Example: "according the the"
> meaning: "according to the"
>
> Note that I sometimes took the opportunity to fix
> other spelling issues or typos in the same sentences.
> I also fixed a few checkpatch errors in the same
> lines.
>
> Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
> ---
> Documentation/ABI/testing/sysfs-devices-memory | 2 +-
> Documentation/DocBook/media/v4l/controls.xml | 2 +-
> Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
> Documentation/devicetree/bindings/arm/msm/timer.txt | 2 +-
> Documentation/devicetree/bindings/ata/cavium-compact-flash.txt | 2 +-
> Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt | 2 +-
> Documentation/devicetree/bindings/mtd/fsmc-nand.txt | 2 +-
> Documentation/filesystems/autofs4-mount-control.txt | 6 +++---
> Documentation/futex-requeue-pi.txt | 2 +-
> Documentation/input/multi-touch-protocol.txt | 2 +-
> Documentation/kmemcheck.txt | 2 +-
> Documentation/memory-barriers.txt | 2 +-
> Documentation/networking/spider_net.txt | 2 +-
> Documentation/phy.txt | 2 +-
> Documentation/power/devices.txt | 2 +-
> Documentation/security/Smack.txt | 2 +-
> Documentation/trace/ring-buffer-design.txt | 2 +-
> Documentation/usb/WUSB-Design-overview.txt | 2 +-
> Documentation/virtual/kvm/api.txt | 2 +-
> Documentation/vm/unevictable-lru.txt | 2 +-
> arch/arm/Kconfig | 2 +-
> arch/arm/include/asm/unwind.h | 2 +-
> arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
> arch/arm/mach-pxa/stargate2.c | 2 +-
> arch/blackfin/mach-common/entry.S | 2 +-
> arch/c6x/platforms/cache.c | 2 +-
> arch/ia64/include/asm/spinlock.h | 2 +-
> arch/ia64/include/asm/uv/uv_hub.h | 2 +-
> arch/m68k/platform/coldfire/intc-2.c | 2 +-
> arch/metag/kernel/process.c | 2 +-
> arch/microblaze/kernel/entry.S | 2 +-
> arch/mips/alchemy/devboards/pm.c | 2 +-
> arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
> arch/mips/include/asm/spinlock.h | 2 +-
> arch/mips/kernel/smtc.c | 2 +-
> arch/mips/kvm/kvm_mips.c | 2 +-
> arch/mips/mm/c-octeon.c | 4 ++--
> arch/mips/netlogic/xlr/fmn.c | 2 +-
> arch/powerpc/include/asm/cache.h | 2 +-
> arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
> arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
> arch/powerpc/kernel/head_64.S | 2 +-
> arch/powerpc/mm/gup.c | 2 +-
> arch/powerpc/mm/hugetlbpage.c | 2 +-
> arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
> arch/powerpc/platforms/chrp/setup.c | 2 +-
> arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
> arch/s390/kernel/perf_cpum_sf.c | 2 +-
> arch/s390/mm/gup.c | 2 +-
> arch/sparc/kernel/pci.c | 2 +-
> arch/sparc/mm/gup.c | 2 +-
> arch/tile/include/asm/irqflags.h | 2 +-
> arch/tile/include/gxio/trio.h | 2 +-
> arch/tile/kernel/single_step.c | 2 +-
> arch/x86/include/asm/spinlock.h | 2 +-
> arch/x86/include/asm/uv/uv_hub.h | 2 +-
> arch/x86/kvm/x86.c | 2 +-
> arch/x86/mm/gup.c | 4 ++--
> arch/x86/xen/setup.c | 2 +-
> arch/xtensa/include/asm/initialize_mmu.h | 2 +-
> arch/xtensa/kernel/entry.S | 4 ++--
> drivers/acpi/acpica/accommon.h | 2 +-
> drivers/acpi/acpica/tbfadt.c | 2 +-
> drivers/block/drbd/drbd_main.c | 2 +-
> drivers/char/apm-emulation.c | 2 +-
> drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
> drivers/cpuidle/driver.c | 2 +-
> drivers/crypto/picoxcell_crypto.c | 2 +-
> drivers/crypto/ux500/hash/hash_core.c | 2 +-
> drivers/gpio/gpio-ich.c | 2 +-
> drivers/gpu/drm/i915/i915_gem.c | 2 +-
> drivers/gpu/drm/i915/intel_display.c | 4 ++--
> drivers/gpu/drm/radeon/atombios.h | 4 ++--
> drivers/gpu/drm/radeon/r300_reg.h | 2 +-
> drivers/gpu/drm/radeon/radeon_device.c | 2 +-
> drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
> drivers/gpu/drm/radeon/radeon_gart.c | 2 +-
> drivers/hv/channel.c | 4 ++--
> drivers/hv/vmbus_drv.c | 2 +-
> drivers/hwmon/pmbus/ucd9200.c | 2 +-
> drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
> drivers/infiniband/hw/qib/qib.h | 2 +-
> drivers/input/mouse/gpio_mouse.c | 2 +-
> drivers/input/touchscreen/atmel_mxt_ts.c | 2 +-
> drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
> drivers/lguest/core.c | 2 +-
> drivers/media/dvb-frontends/tda1002x.h | 2 +-
> drivers/media/dvb-frontends/tda10048.c | 2 +-
> drivers/media/pci/cx88/cx88-dsp.c | 2 +-
> drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
> drivers/media/pci/saa7164/saa7164-core.c | 2 +-
> drivers/media/platform/davinci/vpbe.c | 2 +-
> drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
> drivers/media/platform/omap3isp/isp.c | 2 +-
> drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
> drivers/media/usb/dvb-usb/friio.c | 2 +-
> drivers/media/usb/dvb-usb/friio.h | 2 +-
> drivers/media/usb/gspca/finepix.c | 2 +-
> drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
> drivers/media/usb/uvc/uvc_video.c | 2 +-
> drivers/memory/emif.c | 2 +-
> drivers/message/fusion/mptspi.c | 2 +-
> drivers/mfd/db8500-prcmu.c | 2 +-
> drivers/misc/sgi-gru/grukservices.c | 2 +-
> drivers/misc/sgi-xp/xpc_uv.c | 2 +-
> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
> drivers/mtd/ubi/ubi.h | 4 ++--
> drivers/mtd/ubi/wl.c | 2 +-
> drivers/net/ethernet/calxeda/xgmac.c | 2 +-
> drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +-
> drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
> drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
> drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
> drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
> drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
> drivers/net/ethernet/neterion/s2io.c | 2 +-
> drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
> drivers/net/wimax/i2400m/i2400m.h | 4 ++--
> drivers/net/wimax/i2400m/rx.c | 2 +-
> drivers/net/wimax/i2400m/tx.c | 2 +-
> drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
> drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
> drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
> drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
> drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
> drivers/net/wireless/ath/wcn36xx/hal.h | 6 +++---
> drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
> drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++--
> drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 ++--
> drivers/net/wireless/ti/wl1251/acx.h | 2 +-
> drivers/of/base.c | 2 +-
> drivers/pci/hotplug/acpiphp_glue.c | 2 +-
> drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
> drivers/power/power_supply_sysfs.c | 5 +++--
> drivers/rtc/rtc-rs5c372.c | 2 +-
> drivers/s390/net/qeth_core_main.c | 2 +-
> drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
> drivers/scsi/fcoe/fcoe.c | 6 +++---
> drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++--
> drivers/scsi/isci/host.h | 2 +-
> drivers/scsi/isci/remote_device.h | 2 +-
> drivers/scsi/isci/remote_node_context.h | 2 +-
> drivers/scsi/isci/task.c | 2 +-
> drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
> drivers/scsi/lpfc/lpfc_els.c | 2 +-
> drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
> drivers/scsi/lpfc/lpfc_init.c | 2 +-
> drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
> drivers/scsi/lpfc/lpfc_sli.c | 2 +-
> drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
> drivers/spi/spi-ppc4xx.c | 2 +-
> drivers/staging/android/binder.h | 2 +-
> drivers/staging/android/ion/ion.c | 2 +-
> drivers/staging/et131x/et131x.c | 2 +-
> drivers/staging/lustre/lustre/llite/file.c | 2 +-
> drivers/staging/lustre/lustre/ptlrpc/pinger.c | 2 +-
> drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c | 4 ++--
> drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
> drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
> drivers/staging/rtl8712/rtl871x_cmd.c | 2 +-
> drivers/staging/sep/sep_main.c | 6 +++---
> drivers/staging/tidspbridge/include/dspbridge/drv.h | 4 ++--
> drivers/staging/tidspbridge/pmgr/dev.c | 2 +-
> drivers/staging/wlags49_h2/README.wlags49 | 2 +-
> drivers/target/target_core_alua.c | 4 ++--
> drivers/usb/host/xhci-ring.c | 2 +-
> drivers/usb/serial/cypress_m8.c | 2 +-
> drivers/usb/serial/mos7720.c | 2 +-
> drivers/usb/wusbcore/devconnect.c | 2 +-
> drivers/uwb/drp-ie.c | 2 +-
> drivers/video/omap/sossi.c | 2 +-
> drivers/video/sis/sis_accel.c | 2 +-
> fs/autofs4/dev-ioctl.c | 2 +-
> fs/btrfs/dev-replace.c | 2 +-
> fs/btrfs/send.c | 2 +-
> fs/btrfs/tree-log.c | 2 +-
> fs/dcache.c | 4 ++--
> fs/ecryptfs/keystore.c | 2 +-
> fs/ext2/ext2.h | 2 +-
> fs/ext4/inline.c | 4 ++--
> fs/f2fs/segment.h | 2 +-
> fs/kernfs/file.c | 2 +-
> fs/ocfs2/localalloc.c | 2 +-
> fs/xfs/xfs_export.c | 2 +-
> include/drm/drm_rect.h | 2 +-
> include/linux/mm.h | 2 +-
> include/linux/moduleparam.h | 2 +-
> include/linux/skbuff.h | 2 +-
> include/net/caif/caif_layer.h | 2 +-
> include/net/ip6_fib.h | 2 +-
> include/net/wimax.h | 2 +-
> init/main.c | 2 +-
> kernel/jump_label.c | 2 +-
> kernel/printk/printk.c | 2 +-
> kernel/smp.c | 2 +-
> kernel/trace/ring_buffer.c | 2 +-
> lib/bitmap.c | 2 +-
> lib/dynamic_queue_limits.c | 2 +-
> lib/earlycpio.c | 2 +-
> lib/syscall.c | 2 +-
> mm/hugetlb.c | 2 +-
> mm/page_alloc.c | 2 +-
> net/bluetooth/hci_conn.c | 2 +-
> net/bluetooth/hci_core.c | 2 +-
> net/sctp/chunk.c | 4 ++--
> net/sunrpc/auth_generic.c | 2 +-
> net/tipc/link.c | 2 +-
> net/wimax/op-rfkill.c | 2 +-
> scripts/tracing/draw_functrace.py | 2 +-
> security/apparmor/context.c | 2 +-
> security/keys/keyctl.c | 2 +-
> sound/pci/hda/hda_codec.c | 2 +-
> sound/pci/hda/patch_sigmatel.c | 2 +-
> sound/pci/ice1712/prodigy192.c | 2 +-
> sound/soc/codecs/wm9713.c | 2 +-
> sound/soc/fsl/fsl_dma.c | 2 +-
> sound/sparc/dbri.c | 2 +-
> tools/perf/Documentation/perf-diff.txt | 2 +-
> tools/power/x86/turbostat/turbostat.8 | 4 ++--
> tools/thermal/tmon/pid.c | 2 +-
> 220 files changed, 254 insertions(+), 253 deletions(-)
My patch didn't get picked last time. Shall I split it into many commits
and send them to individual maintainers? I would like to avoid creating
unnecessary commits in the kernel history, but if that's the only way...
Cheers,
Michael.
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-03-05 5:55 ` Michael Opdenacker
@ 2014-03-11 12:25 ` Michael Opdenacker
2014-03-11 12:30 ` Michael Opdenacker
0 siblings, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2014-03-11 12:25 UTC (permalink / raw)
To: trivial; +Cc: arend, linux-kernel, Andrew Morton
Adding Andrew Morton to the list, not getting answers from maintainers
after multiple resends...
On 03/05/2014 06:55 AM, Michael Opdenacker wrote:
> On 03/05/2014 06:52 AM, Michael Opdenacker wrote:
>> Fix all occurrences of "the the " in the source code,
>> comments and documentation.
>>
>> The replacement couldn't be automated because sometimes
>> the first "the" was meant to be another word.
>>
>> Example: "according the the"
>> meaning: "according to the"
>>
>> Note that I sometimes took the opportunity to fix
>> other spelling issues or typos in the same sentences.
>> I also fixed a few checkpatch errors in the same
>> lines.
>>
>> Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
>> ---
>> Documentation/ABI/testing/sysfs-devices-memory | 2 +-
>> Documentation/DocBook/media/v4l/controls.xml | 2 +-
>> Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
>> Documentation/devicetree/bindings/arm/msm/timer.txt | 2 +-
>> Documentation/devicetree/bindings/ata/cavium-compact-flash.txt | 2 +-
>> Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt | 2 +-
>> Documentation/devicetree/bindings/mtd/fsmc-nand.txt | 2 +-
>> Documentation/filesystems/autofs4-mount-control.txt | 6 +++---
>> Documentation/futex-requeue-pi.txt | 2 +-
>> Documentation/input/multi-touch-protocol.txt | 2 +-
>> Documentation/kmemcheck.txt | 2 +-
>> Documentation/memory-barriers.txt | 2 +-
>> Documentation/networking/spider_net.txt | 2 +-
>> Documentation/phy.txt | 2 +-
>> Documentation/power/devices.txt | 2 +-
>> Documentation/security/Smack.txt | 2 +-
>> Documentation/trace/ring-buffer-design.txt | 2 +-
>> Documentation/usb/WUSB-Design-overview.txt | 2 +-
>> Documentation/virtual/kvm/api.txt | 2 +-
>> Documentation/vm/unevictable-lru.txt | 2 +-
>> arch/arm/Kconfig | 2 +-
>> arch/arm/include/asm/unwind.h | 2 +-
>> arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
>> arch/arm/mach-pxa/stargate2.c | 2 +-
>> arch/blackfin/mach-common/entry.S | 2 +-
>> arch/c6x/platforms/cache.c | 2 +-
>> arch/ia64/include/asm/spinlock.h | 2 +-
>> arch/ia64/include/asm/uv/uv_hub.h | 2 +-
>> arch/m68k/platform/coldfire/intc-2.c | 2 +-
>> arch/metag/kernel/process.c | 2 +-
>> arch/microblaze/kernel/entry.S | 2 +-
>> arch/mips/alchemy/devboards/pm.c | 2 +-
>> arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
>> arch/mips/include/asm/spinlock.h | 2 +-
>> arch/mips/kernel/smtc.c | 2 +-
>> arch/mips/kvm/kvm_mips.c | 2 +-
>> arch/mips/mm/c-octeon.c | 4 ++--
>> arch/mips/netlogic/xlr/fmn.c | 2 +-
>> arch/powerpc/include/asm/cache.h | 2 +-
>> arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
>> arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
>> arch/powerpc/kernel/head_64.S | 2 +-
>> arch/powerpc/mm/gup.c | 2 +-
>> arch/powerpc/mm/hugetlbpage.c | 2 +-
>> arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
>> arch/powerpc/platforms/chrp/setup.c | 2 +-
>> arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
>> arch/s390/kernel/perf_cpum_sf.c | 2 +-
>> arch/s390/mm/gup.c | 2 +-
>> arch/sparc/kernel/pci.c | 2 +-
>> arch/sparc/mm/gup.c | 2 +-
>> arch/tile/include/asm/irqflags.h | 2 +-
>> arch/tile/include/gxio/trio.h | 2 +-
>> arch/tile/kernel/single_step.c | 2 +-
>> arch/x86/include/asm/spinlock.h | 2 +-
>> arch/x86/include/asm/uv/uv_hub.h | 2 +-
>> arch/x86/kvm/x86.c | 2 +-
>> arch/x86/mm/gup.c | 4 ++--
>> arch/x86/xen/setup.c | 2 +-
>> arch/xtensa/include/asm/initialize_mmu.h | 2 +-
>> arch/xtensa/kernel/entry.S | 4 ++--
>> drivers/acpi/acpica/accommon.h | 2 +-
>> drivers/acpi/acpica/tbfadt.c | 2 +-
>> drivers/block/drbd/drbd_main.c | 2 +-
>> drivers/char/apm-emulation.c | 2 +-
>> drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
>> drivers/cpuidle/driver.c | 2 +-
>> drivers/crypto/picoxcell_crypto.c | 2 +-
>> drivers/crypto/ux500/hash/hash_core.c | 2 +-
>> drivers/gpio/gpio-ich.c | 2 +-
>> drivers/gpu/drm/i915/i915_gem.c | 2 +-
>> drivers/gpu/drm/i915/intel_display.c | 4 ++--
>> drivers/gpu/drm/radeon/atombios.h | 4 ++--
>> drivers/gpu/drm/radeon/r300_reg.h | 2 +-
>> drivers/gpu/drm/radeon/radeon_device.c | 2 +-
>> drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
>> drivers/gpu/drm/radeon/radeon_gart.c | 2 +-
>> drivers/hv/channel.c | 4 ++--
>> drivers/hv/vmbus_drv.c | 2 +-
>> drivers/hwmon/pmbus/ucd9200.c | 2 +-
>> drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
>> drivers/infiniband/hw/qib/qib.h | 2 +-
>> drivers/input/mouse/gpio_mouse.c | 2 +-
>> drivers/input/touchscreen/atmel_mxt_ts.c | 2 +-
>> drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
>> drivers/lguest/core.c | 2 +-
>> drivers/media/dvb-frontends/tda1002x.h | 2 +-
>> drivers/media/dvb-frontends/tda10048.c | 2 +-
>> drivers/media/pci/cx88/cx88-dsp.c | 2 +-
>> drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
>> drivers/media/pci/saa7164/saa7164-core.c | 2 +-
>> drivers/media/platform/davinci/vpbe.c | 2 +-
>> drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
>> drivers/media/platform/omap3isp/isp.c | 2 +-
>> drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
>> drivers/media/usb/dvb-usb/friio.c | 2 +-
>> drivers/media/usb/dvb-usb/friio.h | 2 +-
>> drivers/media/usb/gspca/finepix.c | 2 +-
>> drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
>> drivers/media/usb/uvc/uvc_video.c | 2 +-
>> drivers/memory/emif.c | 2 +-
>> drivers/message/fusion/mptspi.c | 2 +-
>> drivers/mfd/db8500-prcmu.c | 2 +-
>> drivers/misc/sgi-gru/grukservices.c | 2 +-
>> drivers/misc/sgi-xp/xpc_uv.c | 2 +-
>> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
>> drivers/mtd/ubi/ubi.h | 4 ++--
>> drivers/mtd/ubi/wl.c | 2 +-
>> drivers/net/ethernet/calxeda/xgmac.c | 2 +-
>> drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +-
>> drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
>> drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
>> drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
>> drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
>> drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
>> drivers/net/ethernet/neterion/s2io.c | 2 +-
>> drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
>> drivers/net/wimax/i2400m/i2400m.h | 4 ++--
>> drivers/net/wimax/i2400m/rx.c | 2 +-
>> drivers/net/wimax/i2400m/tx.c | 2 +-
>> drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
>> drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
>> drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
>> drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
>> drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
>> drivers/net/wireless/ath/wcn36xx/hal.h | 6 +++---
>> drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
>> drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++--
>> drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 ++--
>> drivers/net/wireless/ti/wl1251/acx.h | 2 +-
>> drivers/of/base.c | 2 +-
>> drivers/pci/hotplug/acpiphp_glue.c | 2 +-
>> drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
>> drivers/power/power_supply_sysfs.c | 5 +++--
>> drivers/rtc/rtc-rs5c372.c | 2 +-
>> drivers/s390/net/qeth_core_main.c | 2 +-
>> drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
>> drivers/scsi/fcoe/fcoe.c | 6 +++---
>> drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++--
>> drivers/scsi/isci/host.h | 2 +-
>> drivers/scsi/isci/remote_device.h | 2 +-
>> drivers/scsi/isci/remote_node_context.h | 2 +-
>> drivers/scsi/isci/task.c | 2 +-
>> drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
>> drivers/scsi/lpfc/lpfc_els.c | 2 +-
>> drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
>> drivers/scsi/lpfc/lpfc_init.c | 2 +-
>> drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
>> drivers/scsi/lpfc/lpfc_sli.c | 2 +-
>> drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
>> drivers/spi/spi-ppc4xx.c | 2 +-
>> drivers/staging/android/binder.h | 2 +-
>> drivers/staging/android/ion/ion.c | 2 +-
>> drivers/staging/et131x/et131x.c | 2 +-
>> drivers/staging/lustre/lustre/llite/file.c | 2 +-
>> drivers/staging/lustre/lustre/ptlrpc/pinger.c | 2 +-
>> drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c | 4 ++--
>> drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
>> drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
>> drivers/staging/rtl8712/rtl871x_cmd.c | 2 +-
>> drivers/staging/sep/sep_main.c | 6 +++---
>> drivers/staging/tidspbridge/include/dspbridge/drv.h | 4 ++--
>> drivers/staging/tidspbridge/pmgr/dev.c | 2 +-
>> drivers/staging/wlags49_h2/README.wlags49 | 2 +-
>> drivers/target/target_core_alua.c | 4 ++--
>> drivers/usb/host/xhci-ring.c | 2 +-
>> drivers/usb/serial/cypress_m8.c | 2 +-
>> drivers/usb/serial/mos7720.c | 2 +-
>> drivers/usb/wusbcore/devconnect.c | 2 +-
>> drivers/uwb/drp-ie.c | 2 +-
>> drivers/video/omap/sossi.c | 2 +-
>> drivers/video/sis/sis_accel.c | 2 +-
>> fs/autofs4/dev-ioctl.c | 2 +-
>> fs/btrfs/dev-replace.c | 2 +-
>> fs/btrfs/send.c | 2 +-
>> fs/btrfs/tree-log.c | 2 +-
>> fs/dcache.c | 4 ++--
>> fs/ecryptfs/keystore.c | 2 +-
>> fs/ext2/ext2.h | 2 +-
>> fs/ext4/inline.c | 4 ++--
>> fs/f2fs/segment.h | 2 +-
>> fs/kernfs/file.c | 2 +-
>> fs/ocfs2/localalloc.c | 2 +-
>> fs/xfs/xfs_export.c | 2 +-
>> include/drm/drm_rect.h | 2 +-
>> include/linux/mm.h | 2 +-
>> include/linux/moduleparam.h | 2 +-
>> include/linux/skbuff.h | 2 +-
>> include/net/caif/caif_layer.h | 2 +-
>> include/net/ip6_fib.h | 2 +-
>> include/net/wimax.h | 2 +-
>> init/main.c | 2 +-
>> kernel/jump_label.c | 2 +-
>> kernel/printk/printk.c | 2 +-
>> kernel/smp.c | 2 +-
>> kernel/trace/ring_buffer.c | 2 +-
>> lib/bitmap.c | 2 +-
>> lib/dynamic_queue_limits.c | 2 +-
>> lib/earlycpio.c | 2 +-
>> lib/syscall.c | 2 +-
>> mm/hugetlb.c | 2 +-
>> mm/page_alloc.c | 2 +-
>> net/bluetooth/hci_conn.c | 2 +-
>> net/bluetooth/hci_core.c | 2 +-
>> net/sctp/chunk.c | 4 ++--
>> net/sunrpc/auth_generic.c | 2 +-
>> net/tipc/link.c | 2 +-
>> net/wimax/op-rfkill.c | 2 +-
>> scripts/tracing/draw_functrace.py | 2 +-
>> security/apparmor/context.c | 2 +-
>> security/keys/keyctl.c | 2 +-
>> sound/pci/hda/hda_codec.c | 2 +-
>> sound/pci/hda/patch_sigmatel.c | 2 +-
>> sound/pci/ice1712/prodigy192.c | 2 +-
>> sound/soc/codecs/wm9713.c | 2 +-
>> sound/soc/fsl/fsl_dma.c | 2 +-
>> sound/sparc/dbri.c | 2 +-
>> tools/perf/Documentation/perf-diff.txt | 2 +-
>> tools/power/x86/turbostat/turbostat.8 | 4 ++--
>> tools/thermal/tmon/pid.c | 2 +-
>> 220 files changed, 254 insertions(+), 253 deletions(-)
> My patch didn't get picked last time. Shall I split it into many commits
> and send them to individual maintainers? I would like to avoid creating
> unnecessary commits in the kernel history, but if that's the only way...
>
> Cheers,
>
> Michael.
--
Michael Opdenacker, CEO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
+33 484 258 098
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-03-11 12:25 ` Michael Opdenacker
@ 2014-03-11 12:30 ` Michael Opdenacker
0 siblings, 0 replies; 35+ messages in thread
From: Michael Opdenacker @ 2014-03-11 12:30 UTC (permalink / raw)
To: trivial; +Cc: arend, linux-kernel, Andrew Morton
Oops, not nice to force Andrew to take the patch from an earlier message
in the thread (this was just a reply, this doesn't work with "git am").
I will resend later.
Michael.
On 03/11/2014 01:25 PM, Michael Opdenacker wrote:
> Adding Andrew Morton to the list, not getting answers from maintainers
> after multiple resends...
>
> On 03/05/2014 06:55 AM, Michael Opdenacker wrote:
>> On 03/05/2014 06:52 AM, Michael Opdenacker wrote:
>>> Fix all occurrences of "the the " in the source code,
>>> comments and documentation.
>>>
>>> The replacement couldn't be automated because sometimes
>>> the first "the" was meant to be another word.
>>>
>>> Example: "according the the"
>>> meaning: "according to the"
>>>
>>> Note that I sometimes took the opportunity to fix
>>> other spelling issues or typos in the same sentences.
>>> I also fixed a few checkpatch errors in the same
>>> lines.
>>>
>>> Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
>>> ---
>>> Documentation/ABI/testing/sysfs-devices-memory | 2 +-
>>> Documentation/DocBook/media/v4l/controls.xml | 2 +-
>>> Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
>>> Documentation/devicetree/bindings/arm/msm/timer.txt | 2 +-
>>> Documentation/devicetree/bindings/ata/cavium-compact-flash.txt | 2 +-
>>> Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt | 2 +-
>>> Documentation/devicetree/bindings/mtd/fsmc-nand.txt | 2 +-
>>> Documentation/filesystems/autofs4-mount-control.txt | 6 +++---
>>> Documentation/futex-requeue-pi.txt | 2 +-
>>> Documentation/input/multi-touch-protocol.txt | 2 +-
>>> Documentation/kmemcheck.txt | 2 +-
>>> Documentation/memory-barriers.txt | 2 +-
>>> Documentation/networking/spider_net.txt | 2 +-
>>> Documentation/phy.txt | 2 +-
>>> Documentation/power/devices.txt | 2 +-
>>> Documentation/security/Smack.txt | 2 +-
>>> Documentation/trace/ring-buffer-design.txt | 2 +-
>>> Documentation/usb/WUSB-Design-overview.txt | 2 +-
>>> Documentation/virtual/kvm/api.txt | 2 +-
>>> Documentation/vm/unevictable-lru.txt | 2 +-
>>> arch/arm/Kconfig | 2 +-
>>> arch/arm/include/asm/unwind.h | 2 +-
>>> arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
>>> arch/arm/mach-pxa/stargate2.c | 2 +-
>>> arch/blackfin/mach-common/entry.S | 2 +-
>>> arch/c6x/platforms/cache.c | 2 +-
>>> arch/ia64/include/asm/spinlock.h | 2 +-
>>> arch/ia64/include/asm/uv/uv_hub.h | 2 +-
>>> arch/m68k/platform/coldfire/intc-2.c | 2 +-
>>> arch/metag/kernel/process.c | 2 +-
>>> arch/microblaze/kernel/entry.S | 2 +-
>>> arch/mips/alchemy/devboards/pm.c | 2 +-
>>> arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
>>> arch/mips/include/asm/spinlock.h | 2 +-
>>> arch/mips/kernel/smtc.c | 2 +-
>>> arch/mips/kvm/kvm_mips.c | 2 +-
>>> arch/mips/mm/c-octeon.c | 4 ++--
>>> arch/mips/netlogic/xlr/fmn.c | 2 +-
>>> arch/powerpc/include/asm/cache.h | 2 +-
>>> arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
>>> arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
>>> arch/powerpc/kernel/head_64.S | 2 +-
>>> arch/powerpc/mm/gup.c | 2 +-
>>> arch/powerpc/mm/hugetlbpage.c | 2 +-
>>> arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
>>> arch/powerpc/platforms/chrp/setup.c | 2 +-
>>> arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
>>> arch/s390/kernel/perf_cpum_sf.c | 2 +-
>>> arch/s390/mm/gup.c | 2 +-
>>> arch/sparc/kernel/pci.c | 2 +-
>>> arch/sparc/mm/gup.c | 2 +-
>>> arch/tile/include/asm/irqflags.h | 2 +-
>>> arch/tile/include/gxio/trio.h | 2 +-
>>> arch/tile/kernel/single_step.c | 2 +-
>>> arch/x86/include/asm/spinlock.h | 2 +-
>>> arch/x86/include/asm/uv/uv_hub.h | 2 +-
>>> arch/x86/kvm/x86.c | 2 +-
>>> arch/x86/mm/gup.c | 4 ++--
>>> arch/x86/xen/setup.c | 2 +-
>>> arch/xtensa/include/asm/initialize_mmu.h | 2 +-
>>> arch/xtensa/kernel/entry.S | 4 ++--
>>> drivers/acpi/acpica/accommon.h | 2 +-
>>> drivers/acpi/acpica/tbfadt.c | 2 +-
>>> drivers/block/drbd/drbd_main.c | 2 +-
>>> drivers/char/apm-emulation.c | 2 +-
>>> drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
>>> drivers/cpuidle/driver.c | 2 +-
>>> drivers/crypto/picoxcell_crypto.c | 2 +-
>>> drivers/crypto/ux500/hash/hash_core.c | 2 +-
>>> drivers/gpio/gpio-ich.c | 2 +-
>>> drivers/gpu/drm/i915/i915_gem.c | 2 +-
>>> drivers/gpu/drm/i915/intel_display.c | 4 ++--
>>> drivers/gpu/drm/radeon/atombios.h | 4 ++--
>>> drivers/gpu/drm/radeon/r300_reg.h | 2 +-
>>> drivers/gpu/drm/radeon/radeon_device.c | 2 +-
>>> drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
>>> drivers/gpu/drm/radeon/radeon_gart.c | 2 +-
>>> drivers/hv/channel.c | 4 ++--
>>> drivers/hv/vmbus_drv.c | 2 +-
>>> drivers/hwmon/pmbus/ucd9200.c | 2 +-
>>> drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
>>> drivers/infiniband/hw/qib/qib.h | 2 +-
>>> drivers/input/mouse/gpio_mouse.c | 2 +-
>>> drivers/input/touchscreen/atmel_mxt_ts.c | 2 +-
>>> drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
>>> drivers/lguest/core.c | 2 +-
>>> drivers/media/dvb-frontends/tda1002x.h | 2 +-
>>> drivers/media/dvb-frontends/tda10048.c | 2 +-
>>> drivers/media/pci/cx88/cx88-dsp.c | 2 +-
>>> drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
>>> drivers/media/pci/saa7164/saa7164-core.c | 2 +-
>>> drivers/media/platform/davinci/vpbe.c | 2 +-
>>> drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
>>> drivers/media/platform/omap3isp/isp.c | 2 +-
>>> drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
>>> drivers/media/usb/dvb-usb/friio.c | 2 +-
>>> drivers/media/usb/dvb-usb/friio.h | 2 +-
>>> drivers/media/usb/gspca/finepix.c | 2 +-
>>> drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
>>> drivers/media/usb/uvc/uvc_video.c | 2 +-
>>> drivers/memory/emif.c | 2 +-
>>> drivers/message/fusion/mptspi.c | 2 +-
>>> drivers/mfd/db8500-prcmu.c | 2 +-
>>> drivers/misc/sgi-gru/grukservices.c | 2 +-
>>> drivers/misc/sgi-xp/xpc_uv.c | 2 +-
>>> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
>>> drivers/mtd/ubi/ubi.h | 4 ++--
>>> drivers/mtd/ubi/wl.c | 2 +-
>>> drivers/net/ethernet/calxeda/xgmac.c | 2 +-
>>> drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +-
>>> drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
>>> drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
>>> drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
>>> drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
>>> drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
>>> drivers/net/ethernet/neterion/s2io.c | 2 +-
>>> drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
>>> drivers/net/wimax/i2400m/i2400m.h | 4 ++--
>>> drivers/net/wimax/i2400m/rx.c | 2 +-
>>> drivers/net/wimax/i2400m/tx.c | 2 +-
>>> drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
>>> drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
>>> drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
>>> drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
>>> drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
>>> drivers/net/wireless/ath/wcn36xx/hal.h | 6 +++---
>>> drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
>>> drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++--
>>> drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 ++--
>>> drivers/net/wireless/ti/wl1251/acx.h | 2 +-
>>> drivers/of/base.c | 2 +-
>>> drivers/pci/hotplug/acpiphp_glue.c | 2 +-
>>> drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
>>> drivers/power/power_supply_sysfs.c | 5 +++--
>>> drivers/rtc/rtc-rs5c372.c | 2 +-
>>> drivers/s390/net/qeth_core_main.c | 2 +-
>>> drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
>>> drivers/scsi/fcoe/fcoe.c | 6 +++---
>>> drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++--
>>> drivers/scsi/isci/host.h | 2 +-
>>> drivers/scsi/isci/remote_device.h | 2 +-
>>> drivers/scsi/isci/remote_node_context.h | 2 +-
>>> drivers/scsi/isci/task.c | 2 +-
>>> drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
>>> drivers/scsi/lpfc/lpfc_els.c | 2 +-
>>> drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
>>> drivers/scsi/lpfc/lpfc_init.c | 2 +-
>>> drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
>>> drivers/scsi/lpfc/lpfc_sli.c | 2 +-
>>> drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
>>> drivers/spi/spi-ppc4xx.c | 2 +-
>>> drivers/staging/android/binder.h | 2 +-
>>> drivers/staging/android/ion/ion.c | 2 +-
>>> drivers/staging/et131x/et131x.c | 2 +-
>>> drivers/staging/lustre/lustre/llite/file.c | 2 +-
>>> drivers/staging/lustre/lustre/ptlrpc/pinger.c | 2 +-
>>> drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c | 4 ++--
>>> drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
>>> drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
>>> drivers/staging/rtl8712/rtl871x_cmd.c | 2 +-
>>> drivers/staging/sep/sep_main.c | 6 +++---
>>> drivers/staging/tidspbridge/include/dspbridge/drv.h | 4 ++--
>>> drivers/staging/tidspbridge/pmgr/dev.c | 2 +-
>>> drivers/staging/wlags49_h2/README.wlags49 | 2 +-
>>> drivers/target/target_core_alua.c | 4 ++--
>>> drivers/usb/host/xhci-ring.c | 2 +-
>>> drivers/usb/serial/cypress_m8.c | 2 +-
>>> drivers/usb/serial/mos7720.c | 2 +-
>>> drivers/usb/wusbcore/devconnect.c | 2 +-
>>> drivers/uwb/drp-ie.c | 2 +-
>>> drivers/video/omap/sossi.c | 2 +-
>>> drivers/video/sis/sis_accel.c | 2 +-
>>> fs/autofs4/dev-ioctl.c | 2 +-
>>> fs/btrfs/dev-replace.c | 2 +-
>>> fs/btrfs/send.c | 2 +-
>>> fs/btrfs/tree-log.c | 2 +-
>>> fs/dcache.c | 4 ++--
>>> fs/ecryptfs/keystore.c | 2 +-
>>> fs/ext2/ext2.h | 2 +-
>>> fs/ext4/inline.c | 4 ++--
>>> fs/f2fs/segment.h | 2 +-
>>> fs/kernfs/file.c | 2 +-
>>> fs/ocfs2/localalloc.c | 2 +-
>>> fs/xfs/xfs_export.c | 2 +-
>>> include/drm/drm_rect.h | 2 +-
>>> include/linux/mm.h | 2 +-
>>> include/linux/moduleparam.h | 2 +-
>>> include/linux/skbuff.h | 2 +-
>>> include/net/caif/caif_layer.h | 2 +-
>>> include/net/ip6_fib.h | 2 +-
>>> include/net/wimax.h | 2 +-
>>> init/main.c | 2 +-
>>> kernel/jump_label.c | 2 +-
>>> kernel/printk/printk.c | 2 +-
>>> kernel/smp.c | 2 +-
>>> kernel/trace/ring_buffer.c | 2 +-
>>> lib/bitmap.c | 2 +-
>>> lib/dynamic_queue_limits.c | 2 +-
>>> lib/earlycpio.c | 2 +-
>>> lib/syscall.c | 2 +-
>>> mm/hugetlb.c | 2 +-
>>> mm/page_alloc.c | 2 +-
>>> net/bluetooth/hci_conn.c | 2 +-
>>> net/bluetooth/hci_core.c | 2 +-
>>> net/sctp/chunk.c | 4 ++--
>>> net/sunrpc/auth_generic.c | 2 +-
>>> net/tipc/link.c | 2 +-
>>> net/wimax/op-rfkill.c | 2 +-
>>> scripts/tracing/draw_functrace.py | 2 +-
>>> security/apparmor/context.c | 2 +-
>>> security/keys/keyctl.c | 2 +-
>>> sound/pci/hda/hda_codec.c | 2 +-
>>> sound/pci/hda/patch_sigmatel.c | 2 +-
>>> sound/pci/ice1712/prodigy192.c | 2 +-
>>> sound/soc/codecs/wm9713.c | 2 +-
>>> sound/soc/fsl/fsl_dma.c | 2 +-
>>> sound/sparc/dbri.c | 2 +-
>>> tools/perf/Documentation/perf-diff.txt | 2 +-
>>> tools/power/x86/turbostat/turbostat.8 | 4 ++--
>>> tools/thermal/tmon/pid.c | 2 +-
>>> 220 files changed, 254 insertions(+), 253 deletions(-)
>> My patch didn't get picked last time. Shall I split it into many commits
>> and send them to individual maintainers? I would like to avoid creating
>> unnecessary commits in the kernel history, but if that's the only way...
>>
>> Cheers,
>>
>> Michael.
>
--
Michael Opdenacker, CEO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
+33 484 258 098
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-03-05 5:52 ` [PATCH] [RESEND][TRIVIAL] " Michael Opdenacker
2014-03-05 5:55 ` Michael Opdenacker
@ 2014-10-01 9:53 ` Michael Opdenacker
2014-10-01 13:32 ` Joe Perches
1 sibling, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2014-10-01 9:53 UTC (permalink / raw)
To: trivial; +Cc: akpm, arend, linux-kernel, gregkh, Michael Opdenacker
Fix all occurrences of "the the " in the source code,
comments and documentation.
The replacement couldn't be automated because sometimes
the first "the" was meant to be another word.
Example: "according the the"
meaning: "according to the"
Note that I sometimes took the opportunity to fix
other spelling issues or typos in the same sentences.
I also fixed a few checkpatch errors in the same
lines, but not all of them (should be addressed by
separate patches).
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
---
Documentation/ABI/testing/sysfs-devices-memory | 2 +-
Documentation/DocBook/media/v4l/controls.xml | 2 +-
Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
.../devicetree/bindings/arm/msm/timer.txt | 2 +-
.../bindings/ata/cavium-compact-flash.txt | 2 +-
.../devicetree/bindings/gpio/gpio-pcf857x.txt | 2 +-
.../devicetree/bindings/iio/adc/xilinx-xadc.txt | 2 +-
.../devicetree/bindings/mtd/fsmc-nand.txt | 2 +-
.../bindings/net/broadcom-systemport.txt | 2 +-
.../filesystems/autofs4-mount-control.txt | 4 +-
Documentation/phy.txt | 2 +-
Documentation/vm/unevictable-lru.txt | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/unwind.h | 2 +-
arch/arm/mach-omap2/omap_hwmod.c | 6 +-
arch/arm/mach-pxa/stargate2.c | 2 +-
arch/arm64/crypto/aes-neon.S | 2 +-
arch/blackfin/mach-common/entry.S | 2 +-
arch/c6x/platforms/cache.c | 2 +-
arch/ia64/include/asm/spinlock.h | 2 +-
arch/ia64/include/asm/uv/uv_hub.h | 2 +-
arch/m68k/platform/coldfire/intc-2.c | 2 +-
arch/metag/kernel/process.c | 2 +-
arch/microblaze/kernel/entry.S | 2 +-
arch/mips/alchemy/devboards/pm.c | 2 +-
arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
arch/mips/include/asm/spinlock.h | 2 +-
arch/mips/kvm/mips.c | 2 +-
arch/mips/mm/c-octeon.c | 4 +-
arch/mips/netlogic/xlr/fmn.c | 2 +-
arch/powerpc/include/asm/cache.h | 2 +-
arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
arch/powerpc/kernel/head_64.S | 2 +-
arch/powerpc/mm/gup.c | 2 +-
arch/powerpc/mm/hugetlbpage.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/platforms/chrp/setup.c | 2 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
arch/s390/kernel/perf_cpum_sf.c | 2 +-
arch/s390/mm/gup.c | 2 +-
arch/sparc/kernel/pci.c | 2 +-
arch/sparc/mm/gup.c | 2 +-
arch/tile/include/asm/irqflags.h | 2 +-
arch/tile/include/gxio/trio.h | 2 +-
arch/tile/kernel/single_step.c | 2 +-
arch/x86/include/asm/spinlock.h | 2 +-
arch/x86/include/asm/uv/uv_hub.h | 2 +-
arch/x86/kvm/x86.c | 2 +-
arch/x86/mm/gup.c | 4 +-
arch/x86/xen/setup.c | 2 +-
arch/xtensa/include/asm/initialize_mmu.h | 2 +-
arch/xtensa/kernel/entry.S | 4 +-
crypto/asymmetric_keys/pkcs7_parser.h | 2 +-
drivers/acpi/acpica/accommon.h | 2 +-
drivers/acpi/acpica/tbfadt.c | 2 +-
drivers/char/apm-emulation.c | 2 +-
drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
drivers/cpuidle/driver.c | 2 +-
drivers/crypto/picoxcell_crypto.c | 2 +-
drivers/crypto/ux500/hash/hash_core.c | 2 +-
drivers/gpio/gpio-ich.c | 2 +-
drivers/gpio/gpio-sch.c | 4 +-
drivers/gpu/drm/drm_mm.c | 4 +-
drivers/gpu/drm/i915/i915_gem.c | 2 +-
drivers/gpu/drm/i915/i915_gem_userptr.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 4 +-
drivers/gpu/drm/radeon/atombios.h | 4 +-
drivers/gpu/drm/radeon/r300_reg.h | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 2 +-
drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
drivers/gpu/drm/radeon/radeon_vm.c | 4 +-
drivers/hv/channel.c | 4 +-
drivers/hv/vmbus_drv.c | 4 +-
drivers/hwmon/pmbus/ucd9200.c | 2 +-
drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
drivers/infiniband/hw/qib/qib.h | 2 +-
drivers/input/mouse/gpio_mouse.c | 2 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
drivers/lguest/core.c | 2 +-
drivers/media/dvb-frontends/tda1002x.h | 2 +-
drivers/media/dvb-frontends/tda10048.c | 2 +-
drivers/media/pci/cx88/cx88-dsp.c | 2 +-
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/saa7164/saa7164-core.c | 2 +-
drivers/media/platform/davinci/vpbe.c | 2 +-
drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
drivers/media/usb/dvb-usb/friio.c | 2 +-
drivers/media/usb/dvb-usb/friio.h | 2 +-
drivers/media/usb/gspca/finepix.c | 2 +-
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 2 +-
drivers/memory/emif.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/mfd/db8500-prcmu.c | 2 +-
drivers/misc/mic/bus/mic_bus.c | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/ubi/ubi.h | 4 +-
drivers/mtd/ubi/wl.c | 2 +-
drivers/net/can/xilinx_can.c | 2 +-
drivers/net/ethernet/calxeda/xgmac.c | 2 +-
drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
drivers/net/wimax/i2400m/i2400m.h | 4 +-
drivers/net/wimax/i2400m/rx.c | 2 +-
drivers/net/wimax/i2400m/tx.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/wcn36xx/hal.h | 6 +-
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 +-
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 +-
drivers/net/wireless/mwifiex/debugfs.c | 2 +-
drivers/net/wireless/rsi/rsi_91x_sdio.c | 4 +-
drivers/net/wireless/ti/wl1251/acx.h | 2 +-
drivers/of/base.c | 2 +-
drivers/pci/hotplug/acpiphp_glue.c | 2 +-
drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 2 +-
drivers/pinctrl/pinctrl-at91.c | 2 +-
drivers/power/power_supply_sysfs.c | 5 +-
drivers/rtc/rtc-rs5c372.c | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 6 +-
drivers/scsi/fcoe/fcoe_ctlr.c | 4 +-
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/remote_device.h | 2 +-
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 8 +-
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 4 +-
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/spi/spi-ppc4xx.c | 2 +-
drivers/staging/android/ion/ion.c | 2 +-
drivers/staging/android/uapi/binder.h | 2 +-
drivers/staging/et131x/et131x.c | 2 +-
drivers/staging/lustre/lustre/llite/file.c | 2 +-
drivers/staging/lustre/lustre/ptlrpc/pinger.c | 2 +-
drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c | 1486 ++++++++++++++++++++
drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/rtl8712/rtl871x_cmd.c | 2 +-
drivers/staging/rtl8723au/core/rtw_cmd.c | 2 +-
.../common-spar/include/channels/iochannel.h | 4 +-
.../common-spar/include/channels/vbuschannel.h | 6 +-
drivers/staging/unisys/virtpci/virtpci.c | 2 +-
drivers/target/target_core_alua.c | 4 +-
drivers/thunderbolt/ctl.h | 2 +-
drivers/usb/host/max3421-hcd.c | 3 +-
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/mos7720.c | 2 +-
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/uwb/drp-ie.c | 2 +-
drivers/video/fbdev/omap/sossi.c | 2 +-
drivers/video/fbdev/sis/sis_accel.c | 2 +-
fs/autofs4/dev-ioctl.c | 2 +-
fs/btrfs/dev-replace.c | 2 +-
fs/btrfs/send.c | 2 +-
fs/btrfs/tree-log.c | 2 +-
fs/dcache.c | 4 +-
fs/ecryptfs/keystore.c | 2 +-
fs/ext2/ext2.h | 2 +-
fs/ext4/inline.c | 4 +-
fs/f2fs/segment.h | 2 +-
fs/kernfs/file.c | 2 +-
fs/ocfs2/localalloc.c | 2 +-
fs/xfs/xfs_export.c | 2 +-
include/drm/drm_rect.h | 2 +-
include/linux/mic_bus.h | 2 +-
include/linux/mm.h | 2 +-
include/linux/moduleparam.h | 2 +-
include/linux/skbuff.h | 2 +-
include/net/caif/caif_layer.h | 2 +-
include/net/ip6_fib.h | 2 +-
include/net/wimax.h | 2 +-
include/uapi/asm-generic/fcntl.h | 2 +-
init/Kconfig | 4 +-
init/main.c | 2 +-
kernel/jump_label.c | 2 +-
kernel/printk/printk.c | 2 +-
kernel/smp.c | 2 +-
kernel/trace/ring_buffer.c | 2 +-
lib/bitmap.c | 2 +-
lib/dynamic_queue_limits.c | 2 +-
lib/earlycpio.c | 2 +-
lib/syscall.c | 2 +-
mm/hugetlb.c | 2 +-
mm/page_alloc.c | 2 +-
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/hci_core.c | 2 +-
net/sctp/associola.c | 2 +-
net/sctp/chunk.c | 4 +-
net/sunrpc/auth_generic.c | 2 +-
net/wimax/op-rfkill.c | 2 +-
scripts/coccinelle/misc/badty.cocci | 2 +-
scripts/tracing/draw_functrace.py | 2 +-
security/apparmor/context.c | 2 +-
security/keys/keyctl.c | 2 +-
sound/pci/hda/hda_codec.c | 2 +-
sound/pci/hda/patch_sigmatel.c | 2 +-
sound/pci/ice1712/prodigy192.c | 2 +-
sound/soc/codecs/wm9713.c | 2 +-
sound/soc/fsl/fsl_dma.c | 2 +-
sound/sparc/dbri.c | 2 +-
tools/perf/Documentation/perf-diff.txt | 2 +-
tools/power/x86/turbostat/turbostat.8 | 4 +-
tools/thermal/tmon/pid.c | 2 +-
226 files changed, 1749 insertions(+), 263 deletions(-)
create mode 100644 drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index 7405de26ee60..4b3c0208d0a5 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -45,7 +45,7 @@ Description:
The file /sys/devices/system/memory/memoryX/state
is read-write. When read, its contents show the
online/offline state of the memory section. When written,
- root can toggle the the online/offline state of a removable
+ root can toggle the online/offline state of a removable
memory section (see removable file description above)
using the following commands.
# echo online > /sys/devices/system/memory/memoryX/state
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 9f5ffd85560b..a232065a7c6a 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3415,7 +3415,7 @@ giving priority to the center of the metered area.</entry>
<row>
<entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant> </entry>
<entry>A multi-zone metering. The light intensity is measured
-in several points of the frame and the the results are combined. The
+in several points of the frame and the results are combined. The
algorithm of the zones selection and their significance in calculating the
final value is device dependent.</entry>
</row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
index f4e28e7d4751..721728745407 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
@@ -267,7 +267,7 @@ is intended for still imaging applications. The idea is to get the
best possible image quality that the hardware can deliver. It is not
defined how the driver writer may achieve that; it will depend on the
hardware and the ingenuity of the driver writer. High quality mode is
-a different mode from the the regular motion video capture modes. In
+a different mode from the regular motion video capture modes. In
high quality mode:<itemizedlist>
<listitem>
<para>The driver may be able to capture higher
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
index c6ef8f13dc7e..74607b6c1117 100644
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -8,7 +8,7 @@ Properties:
"qcom,kpss-timer" - krait subsystem
"qcom,scss-timer" - scorpion subsystem
-- interrupts : Interrupts for the the debug timer, the first general purpose
+- interrupts : Interrupts for the debug timer, the first general purpose
timer, and optionally a second general purpose timer in that
order.
diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
index 93986a5a8018..3bacc8e0931e 100644
--- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
+++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -9,7 +9,7 @@ Properties:
Compatibility with many Cavium evaluation boards.
-- reg: The base address of the the CF chip select banks. Depending on
+- reg: The base address of the CF chip select banks. Depending on
the device configuration, there may be one or two banks.
- cavium,bus-width: The width of the connection to the CF devices. Valid
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
index d63194a2c848..ada4e2973323 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
@@ -39,7 +39,7 @@ Optional Properties:
- lines-initial-states: Bitmask that specifies the initial state of each
line. When a bit is set to zero, the corresponding line will be initialized to
the input (pulled-up) state. When the bit is set to one, the line will be
- initialized the the low-level output state. If the property is not specified
+ initialized the low-level output state. If the property is not specified
all lines will be initialized to the input state.
The I/O expander can detect input state changes, and thus optionally act as
diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
index d9ee909d2b78..d71258e2d456 100644
--- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
@@ -59,7 +59,7 @@ Optional properties:
Each child node represents one channel and has the following
properties:
Required properties:
- * reg: Pair of pins the the channel is connected to.
+ * reg: Pair of pins the channel is connected to.
0: VP/VN
1: VAUXP[0]/VAUXN[0]
2: VAUXP[1]/VAUXN[1]
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index ec42935f3908..5235cbc551b0 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -9,7 +9,7 @@ Required properties:
Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width
defaults to 1 byte
-- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+- nand-skip-bbtscan: Indicates the BBT scanning should be skipped
- timings: array of 6 bytes for NAND timings. The meanings of these bytes
are:
byte 0 TCLR : CLE to RE delay in number of AHB clock cycles, only 4 bits
diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
index aa7ad622259d..877da34145b0 100644
--- a/Documentation/devicetree/bindings/net/broadcom-systemport.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
@@ -3,7 +3,7 @@
Required properties:
- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the the rx
+- interrupts: interrupts for the device, first cell must be for the rx
interrupts, and the second cell should be for the transmit queues. An
optional third interrupt cell for Wake-on-LAN can be specified
- local-mac-address: Ethernet MAC address (48 bits) of this adapter
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index aff22113a986..e54896427b4a 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -373,7 +373,7 @@ variation uses the path and optionally arg1 set to an autofs mount type.
The call returns 1 if this is a mount point and sets arg1 to the device
number of the mount and field arg2 to the relevant super block magic
number (described below) or 0 if it isn't a mountpoint. In both cases
-the the device number (as returned by new_encode_dev()) is returned
+the device number (as returned by new_encode_dev()) is returned
in field arg1.
If supplied with a file descriptor we're looking for a specific mount,
@@ -387,7 +387,7 @@ is one or 0 if it isn't a mountpoint.
If a path is supplied (and the ioctlfd field is set to -1) then the path
is looked up and is checked to see if it is the root of a mount. If a
type is also given we are looking for a particular autofs mount and if
-a match isn't found a fail is returned. If the the located path is the
+a match isn't found a fail is returned. If the located path is the
root of a mount 1 is returned along with the super magic of the mount
or 0 otherwise.
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index c6594af94d25..27fb3656ec8e 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -87,7 +87,7 @@ should contain the phy name as given in the dt data and in the case of
non-dt boot, it should contain the label of the PHY. The two
devm_phy_get associates the device with the PHY using devres on
successful PHY get. On driver detach, release function is invoked on
-the the devres data and devres data is freed. phy_optional_get and
+the devres data and devres data is freed. phy_optional_get and
devm_phy_optional_get should be used when the phy is optional. These
two functions will never return -ENODEV, but instead returns NULL when
the phy cannot be found.
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index 744f82f86c58..441dd2266531 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -453,7 +453,7 @@ putback_lru_page() function to add migrated pages back to the LRU.
mmap(MAP_LOCKED) SYSTEM CALL HANDLING
-------------------------------------
-In addition the mlock()/mlockall() system calls, an application can request
+In addition to the mlock()/mlockall() system calls, an application can request
that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 32cbbd565902..df27c39b2488 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1909,7 +1909,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
+ appended to the device tree bootargs property.
endchoice
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index d1c3f3a71c94..4f697edd0bad 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -22,7 +22,7 @@
#ifndef __ASSEMBLY__
-/* Unwind reason code according the the ARM EABI documents */
+/* Unwind reason code according to the ARM EABI documents */
enum unwind_reason_code {
URC_OK = 0, /* operation completed successfully */
URC_CONTINUE_UNWIND = 8,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 9e91a4e7519a..300bd6c004de 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -753,7 +753,7 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
}
/**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * _init_main_clk - get a struct clk * for the hwmod's main functional clk
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
@@ -791,7 +791,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
}
/**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
@@ -835,7 +835,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
}
/**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 01de542432a6..6f92e75b6c35 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -423,7 +423,7 @@ static void __init imote2_stargate2_init(void)
}
#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
+/* As the imote2 doesn't currently have a conventional SD slot
* there is no option to hotplug cards, making all this rather simple
*/
static int imote2_mci_get_ro(struct device *dev)
diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S
index b93170e1cc93..d0f01cff23b3 100644
--- a/arch/arm64/crypto/aes-neon.S
+++ b/arch/arm64/crypto/aes-neon.S
@@ -47,7 +47,7 @@
prepare .LReverse_Sbox, .LReverse_ShiftRows, \temp
.endm
- /* apply SubBytes transformation using the the preloaded Sbox */
+ /* apply SubBytes transformation using the preloaded Sbox */
.macro sub_bytes, in
sub v9.16b, \in\().16b, v12.16b
tbl \in\().16b, {v16.16b-v19.16b}, \in\().16b
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 86b5a095c5a1..9c8612385e00 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -480,7 +480,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
#ifdef CONFIG_EXACT_HWERR
/* Make sure all pending read/writes complete. This will ensure any
* accesses which could cause hardware errors completes, and signal
- * the the hardware before we do something silly, like crash the
+ * the hardware before we do something silly, like crash the
* kernel. We don't need to work around anomaly 05000312, since
* we are already atomic
*/
diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c
index 86318a16a252..dc21f94aaaaf 100644
--- a/arch/c6x/platforms/cache.c
+++ b/arch/c6x/platforms/cache.c
@@ -437,7 +437,7 @@ void __init c6x_cache_init(void)
if (!cache_base)
return;
- /* Set L2 caches on the the whole L2 SRAM memory */
+ /* Set L2 caches on the whole L2 SRAM memory */
L2_cache_set_mode(L2MODE_SIZE);
/* Enable L1 */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 45698cd15b7b..bd6ea40f3ef9 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -23,7 +23,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
* The pad bits in the middle are used to prevent the next_ticket number
* overflowing into the now_serving number.
*
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index 53e9dfacd073..3ea4168f28f7 100644
--- a/arch/ia64/include/asm/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -257,7 +257,7 @@ static inline int uv_numa_blade_id(void)
return 0;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return 0;
diff --git a/arch/m68k/platform/coldfire/intc-2.c b/arch/m68k/platform/coldfire/intc-2.c
index 995093357c59..f74f0e473119 100644
--- a/arch/m68k/platform/coldfire/intc-2.c
+++ b/arch/m68k/platform/coldfire/intc-2.c
@@ -7,7 +7,7 @@
* family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
* controllers, and the 547x and 548x families which have only one of them.
*
- * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * The external 7 fixed interrupts are part of the Edge Port unit of these
* ColdFire parts. They can be configured as level or edge triggered.
*
* (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff986a23..30052da1f1a4 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -211,7 +211,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
/*
* Get a pointer to where the new child's register block should have
* been pushed.
- * The Meta's stack grows upwards, and the context is the the first
+ * The Meta's stack grows upwards, and the context is the first
* thing to be pushed by TBX (phew)
*/
*childregs = *current_pt_regs();
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 0536bc021cc6..b417be09196d 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -445,7 +445,7 @@ TRAP_return: /* Make global symbol for debugging */
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look like the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index bfeb8f3c0be6..203767dbeb64 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -16,7 +16,7 @@
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
* is to trigger a wakeup.
*/
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index df69bfd2b006..4ec669f5b0d4 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index)
* offsetof() to determine the offsets into packet headers.
* For example, offsetof(ethhdr, protocol) returns the offset
* of the ethernet protocol field. The bitmask selects which
- * bytes to include the the tag, with bit offset X selecting
+ * bytes to include in the tag, with bit offset X selecting
* byte at offset X from the beginning of the packet data.
* @len: Number of bytes to include. Usually this is the sizeof()
* the field.
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index 78d201fb6c87..b6f41f6b6c70 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -31,7 +31,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*/
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index cd7114147ae7..6660ac807d5a 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -1191,7 +1191,7 @@ int __init kvm_mips_init(void)
* requires TLBs. The TLB handling code is statically linked with
* the rest of the kernel (tlb.c) to avoid the possibility of
* double faulting. The issue is that the TLB code references
- * routines that are part of the the KVM module, which are only
+ * routines that are part of the KVM module, which are only
* available once the module is loaded.
*/
kvm_mips_gfn_to_pfn = gfn_to_pfn;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 05b1d7cf9514..1647426364b9 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -350,7 +350,7 @@ static void co_cache_error_call_notifiers(unsigned long val)
}
/*
- * Called when the the exception is recoverable
+ * Called when the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -359,7 +359,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
}
/**
- * Called when the the exception is not recoverable
+ * Called when the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d428e8471eec..1d1eb1e10ae2 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -144,7 +144,7 @@ void xlr_percpu_fmn_init(void)
* For sending FMN messages, we need credits on the destination
* bucket. Program the credits this core has on the 128 possible
* destination buckets.
- * We cannot use a loop here, because the the first argument has
+ * We cannot use a loop here, because the first argument has
* to be a constant integer value.
*/
COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 34a05a1a990b..af6f17b32531 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -52,7 +52,7 @@ static inline void logmpp(u64 x)
/*
* For a snooping icache, we still need a dummy icbi to purge all the
* prefetched instructions from the ifetch buffers. We also need a sync
- * before the icbi to order the the actual stores to memory that might
+ * before the icbi to order the actual stores to memory that might
* have modified instructions with the icbi.
*/
#define PURGE_PREFETCHED_INS \
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index 334459ad145b..b3219b0ca2c4 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -246,7 +246,7 @@ static inline unsigned int ev_int_get_mask(unsigned int interrupt,
* ev_int_eoi - signal the end of interrupt processing
* @interrupt: the interrupt number
*
- * This function signals the end of processing for the the specified
+ * This function signals the end of processing for the specified
* interrupt, which must be the interrupt currently in service. By
* definition, this is also the highest-priority interrupt.
*
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index ac6432d9be46..a18702780733 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -30,7 +30,7 @@ struct arch_hw_breakpoint {
u16 len; /* length of the target data symbol */
};
-/* Note: Don't change the the first 6 bits below as they are in the same order
+/* Note: Don't change the first 6 bits below as they are in the same order
* as the dabr and dabrx.
*/
#define HW_BRK_TYPE_READ 0x01
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index d48125d0c048..01ecece4ca83 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -94,7 +94,7 @@ __secondary_hold_acknowledge:
#ifdef CONFIG_RELOCATABLE
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
- * is used by kexec-tools to keep the the kdump kernel in the
+ * is used by kexec-tools to keep the kdump kernel in the
* crash_kernel region. The loader is responsible for
* observing the alignment requirement.
*/
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index d8746684f606..a97b81d5cfa6 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -168,7 +168,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on powerpc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 7e70ae968e5f..bf66090de7cc 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -933,7 +933,7 @@ void flush_dcache_icache_hugepage(struct page *page)
* (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table
*
* So long as we atomically load page table pointers we are safe against teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 692998244d2c..a2ce00831362 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -9,7 +9,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * This file is a driver for the the General Purpose Timer (gpt) devices
+ * This file is a driver for the General Purpose Timer (gpt) devices
* found on the MPC5200 SoC. Each timer has an IO pin which can be used
* for GPIO or can be used to raise interrupts. The timer function can
* be used independently from the IO pin, or it can be used to control
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 7044fd36197b..864ced973445 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -251,7 +251,7 @@ static void briq_restart(char *cmd)
* Per default, input/output-device points to the keyboard/screen
* If no card is installed, the built-in serial port is used as a fallback.
* But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
- * the the built-in serial node. Instead, a /failsafe node is created.
+ * to the built-in serial node. Instead, a /failsafe node is created.
*/
static void chrp_init_early(void)
{
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index df241b11d4f7..b7bb2977e87a 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1421,7 +1421,7 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
/*
* This function is supposed to be called on basis of PE from top
- * to bottom style. So the the I/O or MMIO segment assigned to
+ * to bottom style. So the I/O or MMIO segment assigned to
* parent PE could be overrided by its child PEs if necessary.
*/
static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index ea0c7b2ef030..a0b4797a296d 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1128,7 +1128,7 @@ static void debug_sample_entry(struct hws_combined_entry *sample,
* combined-sampling data entry consists of a basic- and a diagnostic-sampling
* data entry. The sampling function is determined by the flags in the perf
* event hardware structure. The function always works with a combined-sampling
- * data entry but ignores the the diagnostic portion if it is not available.
+ * data entry but ignores the diagnostic portion if it is not available.
*
* Note that the implementation focuses on basic-sampling data entries and, if
* such an entry is not valid, the entire combined-sampling data entry is
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 639fce464008..2f03d7badf95 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -187,7 +187,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* prevent the pagetables from being freed on s390.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f49478..ef36086d3db1 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -306,7 +306,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
+ * firmware can sample the value before the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index 1aed0432c64b..74ed2d607036 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -189,7 +189,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on sparc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_disable();
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 71af5747874d..f7f64c80c5b2 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -116,7 +116,7 @@
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
* Likewise, INTCTRL_K is removed and re-added during device
- * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * interrupts, as is the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
* to know our current state.
diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h
index df10a662cc25..50a3d5cbad20 100644
--- a/arch/tile/include/gxio/trio.h
+++ b/arch/tile/include/gxio/trio.h
@@ -206,7 +206,7 @@ typedef struct {
/* Initialize a TRIO context.
*
* This function allocates a TRIO "service domain" and maps the MMIO
- * registers into the the caller's VA space.
+ * registers into the caller's VA space.
*
* @param trio_index Which TRIO shim; Gx36 must pass 0.
* @param context Context object to be initialized.
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index de07fa7d1315..c554ffbb50f7 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -277,7 +277,7 @@ P("\n");
/*
* Called after execve() has started the new image. This allows us
- * to reset the info state. Note that the the mmap'ed memory, if there
+ * to reset the info state. Note that the mmap'ed memory, if there
* was any, has already been unmapped by the exec.
*/
void single_step_execve(void)
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index 54f1c8068c02..04266c294db1 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -71,7 +71,7 @@ static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*
* We use an xadd covering *both* parts of the lock, to increment the tail and
* also load the position of the head, which takes care of memory ordering
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index c63e925fd6b7..361144223ed7 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -512,7 +512,7 @@ static inline int uv_numa_blade_id(void)
return uv_hub_info->numa_blade_id;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return uv_cpu_to_blade[cpu];
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 8f1e22d3b286..5dc89fb405be 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7219,7 +7219,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
if (current->mm == kvm->mm) {
/*
* Free memory regions allocated on behalf of userspace,
- * unless the the memory map has changed due to process exit
+ * unless the memory map has changed due to process exit
* or fd copying.
*/
struct kvm_userspace_memory_region mem;
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 207d9aef662d..a1f84cebb9aa 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -288,7 +288,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
@@ -360,7 +360,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_disable();
pgdp = pgd_offset(mm, addr);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 2e555163c2fe..80e25d7659a2 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -472,7 +472,7 @@ char * __init xen_memory_setup(void)
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
- * We tried to make the the memblock_reserve more selective so
+ * We tried to make the memblock_reserve more selective so
* that it would be clear what region is reserved. Sadly we ran
* in the problem wherein on a 64-bit hypervisor with a 32-bit
* initial domain, the pt_base has the cr3 value which is not
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 600781edc8a3..2e1d20d0b71f 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -6,7 +6,7 @@
* For the new V3 MMU we remap the TLB from virtual == physical
* to the standard Linux mapping used in earlier MMU's.
*
- * The the MMU we also support a new configuration register that
+ * In the MMU we also support a new configuration register that
* specifies how the S32C1I instruction operates with the cache
* controller.
*
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 82bbfa5a05b3..5f2cdfe6f0c2 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
* of the proper size instead.
*
* This algorithm simply backs out the register changes started by the user
- * excpetion handler, makes it appear that we have started a window underflow
+ * exception handler, makes it appear that we have started a window underflow
* by rotating the window back and then setting the old window base (OWB) in
* the 'ps' register with the rolled back window base. The 'movsp' instruction
* will be re-executed and this time since the next window frames is in the
* active AR registers it won't cause an exception.
*
* If the WindowUnderflow code gets a TLB miss the page will get mapped
- * the the partial windeowUnderflow will be handeled in the double exception
+ * and the partial windeowUnderflow will be handeled in the double exception
* handler.
*
* Entry condition:
diff --git a/crypto/asymmetric_keys/pkcs7_parser.h b/crypto/asymmetric_keys/pkcs7_parser.h
index d25f4d15370f..31a2ee79dae7 100644
--- a/crypto/asymmetric_keys/pkcs7_parser.h
+++ b/crypto/asymmetric_keys/pkcs7_parser.h
@@ -42,7 +42,7 @@ struct pkcs7_signed_info {
*
* This contains the generated digest of _either_ the Content Data or
* the Authenticated Attributes [RFC2315 9.3]. If the latter, one of
- * the attributes contains the digest of the the Content Data within
+ * the attributes contains the digest of the Content Data within
* it.
*/
struct public_key_signature sig;
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 6f1c616910ac..826a754954f3 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -47,7 +47,7 @@
/*
* Common set of includes for all ACPICA source files.
* We put them here because we don't want to duplicate them
- * in the the source code again and again.
+ * in the source code again and again.
*
* Note: The order of these include files is important.
*/
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 41519a958083..75e61da5d998 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -435,7 +435,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
* The 64-bit X fields are optional extensions to the original 32-bit FADT
* V1.0 fields. Even if they are present in the FADT, they are optional and
* are unused if the BIOS sets them to zero. Therefore, we must copy/expand
- * 32-bit V1.0 fields to the 64-bit X fields if the the 64-bit X field is
+ * 32-bit V1.0 fields to the 64-bit X fields if the 64-bit X field is
* originally zero.
*
* For ACPI 1.0 FADTs (that contain no 64-bit addresses), all 32-bit address
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index dd9dfa15e9d1..d086acf9562f 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -563,7 +563,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
wake_up_interruptible(&apm_waitqueue);
/*
- * Wait for the the suspend_acks_pending variable to drop to
+ * Wait for the suspend_acks_pending variable to drop to
* zero, meaning everybody acked the suspend event (or the
* process was killed.)
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 02225eb19cf6..619f3a30ec55 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -111,7 +111,7 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
}
/**
- * fifo_icap_set_read_size - Set the the size register.
+ * fifo_icap_set_read_size - Set the size register.
* @drvdata: a pointer to the drvdata.
* @data: the size of the following read transaction, in words.
**/
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index e431d11abf8d..231f0149c540 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -168,7 +168,7 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv)
/*
* Look for the timer stop flag in the different states, so that we know
* if the broadcast timer has to be set up. The loop is in the reverse
- * order, because usually one of the deeper states have this flag set.
+ * order, because usually one of the deeper states has this flag set.
*/
for (i = drv->state_count - 1; i >= 0 ; i--) {
if (drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP) {
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 5da5b98b8f29..60f2267c1350 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -53,7 +53,7 @@
#define CMD0_IRQ_THRESHOLD 1
/*
- * The timeout period (in jiffies) for a PDU. When the the number of PDUs in
+ * The timeout period (in jiffies) for a PDU. When the number of PDUs in
* flight is greater than the STAT_IRQ_THRESHOLD or 0 the timer is disabled.
* When there are packets in flight but lower than the threshold, we enable
* the timer and at expiry, attempt to remove any processed packets from the
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 1c73f4fbc252..2f2a4276a014 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -435,7 +435,7 @@ static int hash_get_device_data(struct hash_ctx *ctx,
* @keylen: The lengt of the key.
*
* Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the the hw design spec. Either due to incorrect info in the
+ * specified in the hw design spec. Either due to incorrect info in the
* spec or due to a bug in the hw.
*/
static void hash_hw_write_key(struct hash_device_data *device_data,
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 3784e81e7762..d548a717d5b9 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -471,7 +471,7 @@ static int ichx_gpio_probe(struct platform_device *pdev)
/*
* If necessary, determine the I/O address of ACPI/power management
- * registers which are needed to read the the GPE0 register for GPI pins
+ * registers which are needed to read the GPE0 register for GPI pins
* 0 - 15 on some chipsets.
*/
if (!ichx_priv.desc->uses_gpe0)
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 41e91d70301e..9b43e701db28 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -111,7 +111,7 @@ static int sch_gpio_core_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
@@ -201,7 +201,7 @@ static int sch_gpio_resume_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 04a209e2b66d..ff92d4c5e379 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -529,12 +529,12 @@ EXPORT_SYMBOL(drm_mm_replace_node);
*
* The DRM range allocator supports this use-case through the scanning
* interfaces. First a scan operation needs to be initialized with
- * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The the driver adds
+ * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The driver adds
* objects to the roaster (probably by walking an LRU list, but this can be
* freely implemented) until a suitable hole is found or there's no further
* evitable object.
*
- * The the driver must walk through all objects again in exactly the reverse
+ * The driver must walk through all objects again in exactly the reverse
* order to restore the allocator state. Note that while the allocator is used
* in the scan mode no other operation is allowed.
*
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ad55b06a3cb1..a73c82dff95f 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2366,7 +2366,7 @@ int __i915_add_request(struct intel_engine_cs *ring,
/* Whilst this request exists, batch_obj will be on the
* active_list, and so will hold the active reference. Only when this
- * request is retired will the the batch_obj be moved onto the
+ * request is retired will the batch_obj be moved onto the
* inactive_list and lose its active reference. Hence we do not need
* to explicitly hold another reference here.
*/
diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c
index d38413997379..7a6a4fed2833 100644
--- a/drivers/gpu/drm/i915/i915_gem_userptr.c
+++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
@@ -225,7 +225,7 @@ i915_mmu_notifier_add(struct drm_device *dev,
* either has cancelled gup work queued and we need to
* return back to the user to give time for the gup-workers
* to flush their object references upon which the object will
- * be removed from the interval-tree, or the the range is
+ * be removed from the interval-tree, or the range is
* still in use by another client and the overlap is invalid.
*
* If we do have an overlap, we cannot use the interval tree
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d8324c69fa86..7b3d64f2ad3f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2607,7 +2607,7 @@ void intel_display_handle_reset(struct drm_device *dev)
* will get its events and not get stuck.
*
* Also update the base address of all primary
- * planes to the the last fb to make sure we're
+ * planes to the last fb to make sure we're
* showing the correct fb after a reset.
*
* Need to make two loops over the crtcs so that we
@@ -10854,7 +10854,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
}
/* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
+ * update the output configuration. */
intel_modeset_update_state(dev, prepare_pipes);
if (dev_priv->display.modeset_global_resources)
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 92be50c39ffd..2be3040b28f1 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -2802,8 +2802,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t
ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 00c0d2ba22d3..36af5f14f622 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -353,7 +353,7 @@
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 12c8329644c4..212cc45defc7 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -379,7 +379,7 @@ void radeon_doorbell_free(struct radeon_device *rdev, u32 doorbell)
/*
* radeon_wb_*()
- * Writeback is the the method by which the the GPU updates special pages
+ * Writeback is the method by which the GPU updates special pages
* in memory with the status of certain GPU events (fences, ring pointers,
* etc.).
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 913787085dfa..d616aea4a52c 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -45,7 +45,7 @@
* for GPU/CPU synchronization. When the fence is written,
* it is expected that all buffers associated with that fence
* are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed. Whether
+ * that the relevant GPU caches have been flushed. Whether
* we use a scratch register or memory location depends on the asic
* and whether writeback is enabled.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c
index 088ffdc2f577..6dbaac58c81e 100644
--- a/drivers/gpu/drm/radeon/radeon_vm.c
+++ b/drivers/gpu/drm/radeon/radeon_vm.c
@@ -40,8 +40,8 @@
* can be mapped as snooped (cached system pages) or unsnooped
* (uncached system pages).
* Each VM has an ID associated with it and there is a page table
- * associated with each VMID. When execting a command buffer,
- * the kernel tells the the ring what VMID to use for that command
+ * associated with each VMID. When executing a command buffer,
+ * the kernel tells the ring what VMID to use for that command
* buffer. VMIDs are allocated dynamically as commands are submitted.
* The userspace drivers maintain their own address space and the kernel
* sets up their pages tables accordingly when they submit their
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 531a593912ec..90947e08e44d 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -553,7 +553,7 @@ EXPORT_SYMBOL_GPL(vmbus_close);
* vmbus_sendpacket() - Send the specified buffer on the given channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @requestid: Identifier of the request
* @type: Type of packet that is being send e.g. negotiate, time
* packet etc.
@@ -730,7 +730,7 @@ EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
* vmbus_recvpacket() - Retrieve the user packet on the specified channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @buffer_actual_len: The actual size of the data after it was received
* @requestid: Identifier of the request
*
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 4d6b26979fbd..5a358e591403 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -849,8 +849,8 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the information we
- * need from DSDT.
+ * VMBUS is an acpi enumerated device. Get the IRQ information
+ * from DSDT.
*/
static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index 033d6aca47d3..d41d7e3bf31c 100644
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -117,7 +117,7 @@ static int ucd9200_probe(struct i2c_client *client,
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
- * for the the phases of the rail.
+ * for the phases of the rail.
*/
for (i = 0; i < info->pages; i++) {
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 28cfe97cf1e9..231b54591e2b 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -87,7 +87,7 @@
* These 3 values (SDR and DDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
+ * are also the possible values for ipath_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define IPATH_IB_SDR 1
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index c00ae093b6f8..6b6499a690af 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -333,7 +333,7 @@ struct qib_verbs_txreq {
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for qib_link_speed_enabled and active
+ * are also the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 8c7d94200bdb..c1418e619f0c 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -17,7 +17,7 @@
/*
* Timer function which is run every scan_ms ms when the device is opened.
- * The dev input variable is set to the the input_dev pointer.
+ * The dev input variable is set to the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_polled_dev *dev)
{
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 114f3bcba1b0..24c15bfb2199 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1566,7 +1566,7 @@ reset_hfcsusb(struct hfcsusb *hw)
write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
((hw->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 6590558d1d31..010d3c6cd5f4 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -202,7 +202,7 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
/*:*/
/*H:030
- * Let's jump straight to the the main loop which runs the Guest.
+ * Let's jump straight to the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
* going around and around until something interesting happens.
*/
diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h
index e404b6e44802..ce0fb855c705 100644
--- a/drivers/media/dvb-frontends/tda1002x.h
+++ b/drivers/media/dvb-frontends/tda1002x.h
@@ -1,6 +1,6 @@
/*
TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index 71fb63299de7..17534ff576ca 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1134,7 +1134,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
state->pll_pfactor = 0;
}
- /* Establish any defaults the the user didn't pass */
+ /* Establish any defaults the user didn't pass */
tda10048_establish_defaults(&state->frontend);
/* Set the xtal and freq defaults */
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..1f8820f5f8c0 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -37,7 +37,7 @@
(compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
/* We calculate the baseband frequencies of the carrier and the pilot tones
- * based on the the sampling rate of the audio rds fifo. */
+ * based on the sampling rate of the audio rds fifo. */
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index 2ad65eb29832..00e0818abfc9 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -555,7 +555,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f)
reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94);
/* Okay, we've wasted time working out the correct value,
- but if we use it, it fouls the the window alignment.
+ but if we use it, it fouls the window alignment.
Fudge it to what we want... */
reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16));
reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16));
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 1bf06970ca3e..ab627dfd7b28 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -636,7 +636,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
}
/* Check that the hardware is accessible. If the status bytes are
- * 0xFF then the device is not accessible, the the IRQ belongs
+ * 0xFF then the device is not accessible, the IRQ belongs
* to another driver.
* 4 x u32 interrupt registers.
*/
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 33b9660b7f77..6ea16e20449d 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -316,7 +316,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
* vpbe_get_output - Get output
* @vpbe_dev - vpbe device ptr
*
- * return current vpbe output to the the index
+ * return current vpbe output to the index
*/
static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
{
diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 3d2babd5067a..b8181874a149 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -505,7 +505,7 @@ static int fimc_capture_open(struct file *file)
if (ret == 0 && vc->user_subdev_api && vc->inh_sensor_ctrls) {
/*
- * Recreate controls of the the video node to drop
+ * Recreate controls of the video node to drop
* any controls inherited from the sensor subdev.
*/
fimc_ctrls_delete(vc->ctx);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 2c7aa6720569..5b8a0e779d0f 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1710,7 +1710,7 @@ void omap3isp_print_status(struct isp_device *isp)
* To solve this problem power management support is split into prepare/complete
* and suspend/resume operations. The pipelines are stopped in prepare() and the
* ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
- * resume(), and the the pipelines are restarted in complete().
+ * resume(), and the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not modelled explicitly
* yet.
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index d56f927fc31a..b5d2e805380d 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 474a17e4db0c..4c7f8fed8046 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h
index 0f461ca10cb9..82d19dcdebc0 100644
--- a/drivers/media/usb/dvb-usb/friio.h
+++ b/drivers/media/usb/dvb-usb/friio.h
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
index 52bdb569760b..414c1b752911 100644
--- a/drivers/media/usb/gspca/finepix.c
+++ b/drivers/media/usb/gspca/finepix.c
@@ -143,7 +143,7 @@ again:
* for, then it's the end of the
* frame. Sometimes the jpeg is not complete,
* but there's nothing we can do. We also end
- * here if the the jpeg ends right at the end
+ * here if the jpeg ends right at the end
* of the frame. */
gspca_frame_add(gspca_dev, LAST_PACKET,
data, len);
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 2e8c3afe4ec4..b7b5a1f630af 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1313,7 +1313,7 @@ static int tm6000_usb_probe(struct usb_interface *interface,
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
-/* check if the the device has the iso in endpoint at the correct place */
+/* check if the device has the iso in endpoint at the correct place */
if (!dev->isoc_in.endp) {
printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
rc = -ENODEV;
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 9144a2f3ed82..62adffa2bd50 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1000,7 +1000,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
}
/* Synchronize to the input stream by waiting for the FID bit to be
- * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE.
* stream->last_fid is initialized to -1, so the first isochronous
* frame will always be in sync.
*
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index d15e16737eef..32d8d6a07e99 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -981,7 +981,7 @@ static void v4l_sanitize_format(struct v4l2_format *fmt)
/*
* The v4l2_pix_format structure has been extended with fields that were
* not previously required to be set to zero by applications. The priv
- * field, when set to a magic value, indicates the the extended fields
+ * field, when set to a magic value, indicates that the extended fields
* are valid. Otherwise they will contain undefined values. To simplify
* the API towards drivers zero the extended fields and set the priv
* field to the magic value when the extended pixel format structure
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 04644e7b42b1..303b322756c7 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -373,7 +373,7 @@ static const struct lpddr2_addressing *get_addressing_table(
}
/*
- * Find the the right timing table from the array of timing
+ * Find the right timing table from the array of timing
* tables of the device using DDR clock frequency
*/
static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 787933d43d32..4328cf6ecf13 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
* @target: per target private data
* @sdev: SCSI device
*
- * Update the target negotiation parameters based on the the Inquiry
+ * Update the target negotiation parameters based on the Inquiry
* data, adapter capabilities, and NVRAM settings.
**/
static void
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 193cf168ba84..5d03af1f5103 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -898,7 +898,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
- * This function sets the the operating point of the ARM.
+ * This function sets the operating point of the ARM.
*/
int db8500_prcmu_set_arm_opp(u8 opp)
{
diff --git a/drivers/misc/mic/bus/mic_bus.c b/drivers/misc/mic/bus/mic_bus.c
index 961ae90aae47..1b15af8c5101 100644
--- a/drivers/misc/mic/bus/mic_bus.c
+++ b/drivers/misc/mic/bus/mic_bus.c
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ drivers/virtio/virtio.c
*/
#include <linux/slab.h>
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 913de07e577c..6482a9c4eb44 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -48,7 +48,7 @@
* kernel/user requirements.
*
* Blade percpu resources reserved for kernel use. These resources are
- * reserved whenever the the kernel context for the blade is loaded. Note
+ * reserved whenever the kernel context for the blade is loaded. Note
* that the kernel context is not guaranteed to be always available. It is
* loaded on demand & can be stolen by a user if the user demand exceeds the
* kernel demand. The kernel can always reload the kernel context but
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 95c894482fdd..f87520cfb787 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1594,7 +1594,7 @@ out_2:
* by xpc_notify_senders_of_disconnect_uv(), and to also get an
* error returned here will confuse them. Additionally, since
* in this case the channel is being disconnected we don't need
- * to put the the msg_slot back on the free list.
+ * to put the msg_slot back on the free list.
*/
if (cmpxchg(&msg_slot->func, func, NULL) != func) {
ret = xpSuccess;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 959cb9b70310..c5b1237ecb33 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -942,7 +942,7 @@ static uint8_t gpmi_read_byte(struct mtd_info *mtd)
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
- * because the the operations are the same.
+ * because the operations are the same.
*/
static void block_mark_swapping(struct gpmi_nand_data *this,
void *payload, void *auxiliary)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 7bf416329c19..3430b17875b5 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -252,7 +252,7 @@ struct ubi_fm_pool {
/**
* struct ubi_volume - UBI volume description data structure.
- * @dev: device object to make use of the the Linux device model
+ * @dev: device object to make use of the Linux device model
* @cdev: character device object to create character device
* @ubi: reference to the UBI device description object
* @vol_id: volume ID
@@ -380,7 +380,7 @@ struct ubi_debug_info {
/**
* struct ubi_device - UBI device description structure
- * @dev: UBI device object to use the the Linux device model
+ * @dev: UBI device object to use for the Linux device model
* @cdev: character device object to create character device
* @ubi_num: UBI device number
* @ubi_name: UBI device name
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 20f491713145..72b64109a22f 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -727,7 +727,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
/**
* sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
- * @e: the the physical eraseblock to erase
+ * @e: the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
*
* This function returns zero in case of success and a negative error code in
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 5e8b5609c067..ad5bfe8618a6 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -532,7 +532,7 @@ static int xcan_rx(struct net_device *ndev)
* @isr: interrupt status register value
*
* This is the CAN error interrupt and it will
- * check the the type of error and forward the error
+ * check the type of error and forward the error
* frame to upper layers.
*/
static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index 25d6b2a10e4e..a6fa3c211f69 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1234,7 +1234,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
* @budget : maximum number of packets that the current CPU can receive from
* all interfaces.
* Description :
- * This function implements the the reception process.
+ * This function implements the reception process.
* Also it runs the TX completion thread
*/
static int xgmac_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 93ff8ef39352..50a7353a85c8 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2363,7 +2363,7 @@ static irqreturn_t be_intx(int irq, void *dev)
}
be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- /* Return IRQ_HANDLED only for the the first spurious intr
+ /* Return IRQ_HANDLED only for the first spurious intr
* after a valid intr to stop the kernel from branding
* this irq as a bad one!
*/
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 1acf5034db10..ee82072b4c08 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -3986,7 +3986,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
* @hw: Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*/
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 48b74a549155..392eb5748897 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3892,7 +3892,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
* @hw: pointer to the HW structure
*
* ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
- * register, so the the bus width is hard coded.
+ * register, so the bus width is hard coded.
**/
static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 236a6183a865..0172e6b70eee 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2166,7 +2166,7 @@ out:
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 87bd53fdd209..81e6836f38ee 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -229,7 +229,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
struct pci_dev *pdev;
- /* determine whether to use the the parent device
+ /* determine whether to use the parent device
*/
if (ixgbe_pcie_from_parent(&adapter->hw))
pdev = adapter->pdev->bus->parent->self;
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index f5e4b820128b..aad8fdb4dfc6 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2158,7 +2158,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
/*
* In PCI 33 mode, the P_PLL is not used, and therefore,
- * the the P_PLL_LOCK bit in the adapter_status register will
+ * the P_PLL_LOCK bit in the adapter_status register will
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 3b67d60d4378..b8da6e89059a 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -83,7 +83,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* returns: 0 on success, -ETIMEDOUT on a timeout
*
* Writes the value to the requested register by first writing the value
- * into MWD register. The the MCR register is then appropriately setup
+ * into MWD register. The MCR register is then appropriately setup
* to finish the write operation.
*/
static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 5a34e72bab9a..6113a29f01bc 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -250,14 +250,14 @@ struct i2400m_barker_db;
*
* @bus_setup: [optional fill] Function called by the bus-generic code
* [i2400m_setup()] to setup the basic bus-specific communications
- * to the the device needed to load firmware. See LIFE CYCLE above.
+ * to the device needed to load firmware. See LIFE CYCLE above.
*
* NOTE: Doesn't need to upload the firmware, as that is taken
* care of by the bus-generic code.
*
* @bus_release: [optional fill] Function called by the bus-generic
* code [i2400m_release()] to shutdown the basic bus-specific
- * communications to the the device needed to load firmware. See
+ * communications to the device needed to load firmware. See
* LIFE CYCLE above.
*
* This function does not need to reset the device, just tear down
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 0b602951ff6b..4466ee71d1e4 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -693,7 +693,7 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq,
* right spot where to insert the packet; we know the queue is
* not empty, so we are not the first ones; we also know we
* are not going to be the last ones. The list is sorted, so
- * we have to insert before the the first guy with an nsn_itr
+ * we have to insert before the first guy with an nsn_itr
* greater that our nsn. */
skb_queue_walk(&roq->queue, skb_itr) {
roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb;
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index f20886ade1cc..1f7b2b922fae 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -233,7 +233,7 @@
* i2400m_tx_skip_tail() Marks unusable FIFO tail space
* i2400m->bus_tx_kick()
*
- * Now i2400m->bus_tx_kick() is the the bus-specific driver backend
+ * Now i2400m->bus_tx_kick() is the bus-specific driver backend
* implementation; that would do:
*
* i2400m->bus_tx_kick()
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index 1c584c4b019c..f34f24d362ed 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -77,7 +77,7 @@ struct rx_attention {
* first_msdu is set.
*
* peer_idx_invalid
- * Indicates no matching entries within the the max search
+ * Indicates no matching entries within the max search
* count. Only set when first_msdu is set.
*
* peer_idx_timeout
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index dc6bd8cd9b83..e32154fe1732 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -98,7 +98,7 @@ struct bus_request {
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- * implemented using the asynchronous mode allowing the the bus
+ * implemented using the asynchronous mode allowing the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 339d89f14d32..8c866de2fe43 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1173,7 +1173,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
* Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
+ * response is available in the FIFO
*
* CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index 9a2afa2c690b..5184d6cbcb90 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -638,7 +638,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN,
AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT);
- /* on AR92xx, the highest bit of count will make the the chip send
+ /* on AR92xx, the highest bit of count will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 542a8d51d3b0..5c8f1e6da5dc 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1627,7 +1627,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
- /* on AR93xx and newer, count = 0 will make the the chip send
+ /* on AR93xx and newer, count = 0 will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index a1f1127d7808..f3aa063dee4b 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -1609,7 +1609,7 @@ struct wcn36xx_hal_config_bss_params {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -1746,7 +1746,7 @@ struct wcn36xx_hal_config_bss_params_v1 {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -3739,7 +3739,7 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
/* Length of the responce message */
u32 rsp_length;
- /* FIXME: Currently considering the the responce will be less than
+ /* FIXME: Currently considering that the responce will be less than
* 100bytes */
u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
} __packed;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 1b474828d5b8..46a0d6575454 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3819,7 +3819,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
}
/*
- * Suspend the the MAC and update the slot timing
+ * Suspend the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index d6073f67b212..c2f550cfbf41 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -189,7 +189,7 @@ enum iwl_tx_flags {
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
+ * @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @key: security key
* @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
@@ -552,7 +552,7 @@ struct iwl_extended_beacon_notif {
/**
* enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
+ * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
index 6cc243f7cf60..8357397cf7d0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
@@ -65,7 +65,7 @@
#include "fw-api.h"
#include "mvm.h"
-/* Maps the driver specific channel width definition to the the fw values */
+/* Maps the driver specific channel width definition to the fw values */
static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
{
switch (chandef->width) {
@@ -86,7 +86,7 @@ static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
/*
* Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
+ * freq) definitions to the fw values
*/
static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index 2713f7acd35e..53618b0e29c0 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -262,7 +262,7 @@ free_and_exit:
* This function is called when the 'fw_dump' file is opened for
* reading.
* This function dumps firmware memory in different files
- * (ex. DTCM, ITCM, SQRAM etc.) based on the the segments for
+ * (ex. DTCM, ITCM, SQRAM etc.) based on the segments for
* debugging.
*/
static ssize_t
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 8428858204a6..e1f05ad89d9e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -596,7 +596,7 @@ static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
* rsi_sdio_host_intf_read_pkt() - This function reads the packet
from the device.
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
* @length: Length of the data to be read from the device.
*
* Return: 0 on success, -1 on failure.
@@ -627,7 +627,7 @@ int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter,
* rsi_init_sdio_interface() - This function does init specific to SDIO.
*
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
*
* Return: 0 on success, -1 on failure.
*/
diff --git a/drivers/net/wireless/ti/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h
index 2bdec38699f4..bfe998947957 100644
--- a/drivers/net/wireless/ti/wl1251/acx.h
+++ b/drivers/net/wireless/ti/wl1251/acx.h
@@ -1243,7 +1243,7 @@ struct wl1251_acx_arp_filter {
u8 address[16]; /* The IP address used to filter ARP packets.
ARP packets that do not match this address are
dropped. When the IP Version is 4, the last 12
- bytes of the the address are ignored. */
+ bytes of the address are ignored. */
} __attribute__((packed));
struct wl1251_acx_ac_cfg {
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 293ed4b687ba..be53777b9f3d 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1849,7 +1849,7 @@ static void of_alias_add(struct alias_prop *ap, struct device_node *np,
* of_alias_scan - Scan all properties of 'aliases' node
*
* The function scans all the properties of 'aliases' node and populate
- * the the global lookup table with the properties. It returns the
+ * the global lookup table with the properties. It returns the
* number of alias_prop found, or error code in error case.
*
* @dt_alloc: An allocator that provides a virtual address to memory
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 6cd5160fc057..89f16d320ead 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -36,7 +36,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#define pr_fmt(fmt) "acpiphp_glue: " fmt
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
index 7dfef3ee5b53..40511e39cea5 100644
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ b/drivers/pcmcia/pxa2xx_hx4700.c
@@ -33,7 +33,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/*
* IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
* The asic3 default IRQ type is level trigger low level detect, exactly
- * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+ * the signal present on GPIOD4_CF_nCD when a CF card is inserted.
* If the IRQ type is not changed, the asic3 interrupt handler will loop
* repeatedly because it is unable to clear the level trigger interrupt.
*/
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index e7cab07eef47..37060a07f260 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1250,7 +1250,7 @@ static int nmk_gpio_probe(struct platform_device *dev)
platform_set_drvdata(dev, nmk_chip);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 60464a2648aa..67a538ebea90 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1461,7 +1461,7 @@ static int at91_gpio_of_irq_setup(struct device_node *node,
writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 750a20275664..b01c7698df02 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -298,8 +298,9 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
ret = power_supply_show_property(dev, attr, prop_buf);
if (ret == -ENODEV || ret == -ENODATA) {
- /* When a battery is absent, we expect -ENODEV. Don't abort;
- send the uevent with at least the the PRESENT=0 property */
+ /* When a battery is absent, we expect -ENODEV.
+ * Don't abort; send the uevent with at least
+ * the PRESENT=0 property */
ret = 0;
continue;
}
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index ccf54f06396b..2108302cc965 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -122,7 +122,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
- * configurations, so we use the the first method there, stripping off
+ * configurations, so we use the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index fd22c811cbe1..8a84e2e42ca2 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3454,7 +3454,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 2035b0d64351..e62a7346428a 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1983,7 +1983,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
/*
* Device's PID has changed. We need to cleanup
* and re-login. If there is another device with
- * the the newly discovered pid, send an scn notice
+ * the newly discovered pid, send an scn notice
* so that its new pid can be discovered.
*/
list_for_each(qe, &rport->port->rport_q) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 00ee0ed642aa..0b88610b9795 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -510,7 +510,7 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
* @skb: The receive skb
* @netdev: The associated net device
* @ptype: The packet_type structure which was used to register this handler
- * @orig_dev: The original net_device the the skb was received on.
+ * @orig_dev: The original net_device that the skb was received on.
* (in case dev is a bond)
*
* Returns: 0 for success
@@ -2727,7 +2727,7 @@ module_exit(fcoe_exit);
* fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
* @seq: active sequence in the FLOGI or FDISC exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
@@ -2756,7 +2756,7 @@ done:
* fcoe_logo_resp() - FCoE specific LOGO response handler
* @seq: active sequence in the LOGO exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 34a1b1f333b4..65a53a9eb059 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -213,7 +213,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new)
* that doesn't have a priv (fcf was deleted). However,
* libfcoe will always delete FCFs before trying to add
* them. This is ensured because both recv_adv and
- * age_fcfs are protected by the the fcoe_ctlr's mutex.
+ * age_fcfs are protected by the fcoe_ctlr's mutex.
* This means that we should never get a FCF with a
* non-NULL priv pointer.
*/
@@ -694,7 +694,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
*
* The caller must check that the length is a multiple of 4.
* The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
- * The the skb must also be an fc_frame.
+ * The skb must also be an fc_frame.
*
* This is called from the lower-level driver with spinlocks held,
* so we must not take a mutex here.
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 22a9bb1abae1..025ec5c10978 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -244,7 +244,7 @@ enum sci_controller_states {
SCIC_INITIALIZED,
/**
- * This state indicates the the controller is in the process of becoming
+ * This state indicates that the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 47a013fffae7..07af745220eb 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete(
* permitted. This state is entered from the INITIAL state. This state
* is entered from the STOPPING state.
*
- * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * @SCI_DEV_STARTING: This state indicates that the remote device is in
* the process of becoming ready (i.e. starting). In this state no new
* IO operations are permitted. This state is entered from the STOPPED
* state.
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
index c7ee81d01125..f22950b12b8b 100644
--- a/drivers/scsi/isci/remote_node_context.h
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state {
/**
* struct sci_remote_node_context - This structure contains the data
* associated with the remote node context object. The remote node context
- * (RNC) object models the the remote device information necessary to manage
+ * (RNC) object models the remote device information necessary to manage
* the silicon RNC.
*/
struct sci_remote_node_context {
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 5d6fda72d659..ba330e56bfe7 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -67,7 +67,7 @@
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
-* @ihost: host on which the the request was queued
+* @ihost: host on which the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 6eed9e76a166..20bdd0603108 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1680,7 +1680,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -1713,7 +1713,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -1846,7 +1846,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -1878,7 +1878,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 7a5d81a65be8..5a447c2c6522 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5813,7 +5813,7 @@ reject_out:
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful, the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 2a17e31265b8..fbad2c534691 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2012,7 +2012,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so that the round robin selection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
@@ -5727,7 +5727,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
}
/* This routine decrements the reference count for a ndlp structure. If the
- * count goes to 0, this indicates the the associated nodelist should be
+ * count goes to 0, this indicates that the associated nodelist should be
* freed. Returning 1 indicates the ndlp resource has been released; on the
* other hand, returning 0 indicates the ndlp resource has not been released
* yet.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index a5769a9960ac..ae2d01f7e67d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3903,7 +3903,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelevant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 1f292e29d566..d9a9ddbf1771 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2265,7 +2265,7 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * that the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 32ada0505576..a24a0b1e59d4 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -16748,7 +16748,7 @@ out:
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index dd12c6fe57a6..7508ee4810a8 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3212,7 +3212,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when HBA driver received the identify done event or initiate FIS received
* event(for SATA), it will invoke this function to notify the sas layer that
- * the sas toplogy has formed, please discover the the whole sas domain,
+ * the sas toplogy has formed, please discover the whole sas domain,
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 80b8408ac3e3..4cbdc43d509c 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -354,7 +354,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
{
/*
* On all 4xx PPC's the SPI bus is shared/multiplexed with
- * the 2nd I2C bus. We need to enable the the SPI bus before
+ * the 2nd I2C bus. We need to enable the SPI bus before
* using it.
*/
diff --git a/drivers/staging/android/ion/ion.c b/drivers/staging/android/ion/ion.c
index 270360912b2c..200ea0ccf7c4 100644
--- a/drivers/staging/android/ion/ion.c
+++ b/drivers/staging/android/ion/ion.c
@@ -901,7 +901,7 @@ void ion_pages_sync_for_device(struct device *dev, struct page *page,
sg_set_page(&sg, page, size, 0);
/*
* This is not correct - sg_dma_address needs a dma_addr_t that is valid
- * for the the targeted device, but this works on the currently targeted
+ * for the targeted device, but this works on the currently targeted
* hardware.
*/
sg_dma_address(&sg) = page_to_phys(page);
diff --git a/drivers/staging/android/uapi/binder.h b/drivers/staging/android/uapi/binder.h
index 904adb7600cf..1dd36442263e 100644
--- a/drivers/staging/android/uapi/binder.h
+++ b/drivers/staging/android/uapi/binder.h
@@ -265,7 +265,7 @@ enum binder_driver_return_protocol {
BR_FAILED_REPLY = _IO('r', 17),
/*
- * The the last transaction (either a bcTRANSACTION or
+ * The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
};
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 831b7c6fe494..3f1f28e2dce2 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -1234,7 +1234,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
/* Initialize the Space Available Register */
writel(0, &rxmac->space_avail);
- /* Initialize the the mif_ctrl register
+ /* Initialize the mif_ctrl register
* bit 3: Receive code error. One or more nibbles were signaled as
* errors during the reception of the packet. Clear this
* bit in Gigabit, set it in 100Mbit. This was derived
diff --git a/drivers/staging/lustre/lustre/llite/file.c b/drivers/staging/lustre/lustre/llite/file.c
index fd1b75a3a569..6c40b3665521 100644
--- a/drivers/staging/lustre/lustre/llite/file.c
+++ b/drivers/staging/lustre/lustre/llite/file.c
@@ -364,7 +364,7 @@ int ll_file_release(struct inode *inode, struct file *file)
fd = LUSTRE_FPRIVATE(file);
LASSERT(fd != NULL);
- /* The last ref on @file, maybe not the the owner pid of statahead.
+ /* The last ref on @file, maybe not the owner pid of statahead.
* Different processes can open the same dir, "ll_opendir_key" means:
* it is me that should stop the statahead thread. */
if (S_ISDIR(inode->i_mode) && lli->lli_opendir_key == fd &&
diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
index 5e4e49fab63c..815c5866cb4b 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
@@ -447,7 +447,7 @@ struct timeout_item* ptlrpc_new_timeout(int time, enum timeout_event event,
}
/**
- * Register timeout event on the the pinger thread.
+ * Register timeout event on the pinger thread.
* Note: the timeout list is an sorted list with increased timeout value.
*/
static struct timeout_item*
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
new file mode 100644
index 000000000000..56b1b9caa0bc
--- /dev/null
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
@@ -0,0 +1,1486 @@
+/*
+ * Original code based Host AP (software wireless LAN access point) driver
+ * for Intersil Prism2/2.5/3 - hostap.o module, common routines
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * Copyright (c) 2004, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ ******************************************************************************
+
+ Few modifications for Realtek's Wi-Fi drivers by
+ Andrea Merello <andrea.merello@gmail.com>
+
+ A special thanks goes to Realtek for their support !
+
+******************************************************************************/
+
+
+#include <linux/compiler.h>
+//#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/if_arp.h>
+#include <linux/in6.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/tcp.h>
+#include <linux/types.h>
+#include <linux/wireless.h>
+#include <linux/etherdevice.h>
+#include <linux/uaccess.h>
+#include <linux/ctype.h>
+
+#include "ieee80211.h"
+#include "dot11d.h"
+static inline void ieee80211_monitor_rx(struct ieee80211_device *ieee,
+ struct sk_buff *skb,
+ struct ieee80211_rx_stats *rx_stats)
+{
+ struct ieee80211_hdr_4addr *hdr =
+ (struct ieee80211_hdr_4addr *)skb->data;
+ u16 fc = le16_to_cpu(hdr->frame_ctl);
+
+ skb->dev = ieee->dev;
+ skb_reset_mac_header(skb);
+ skb_pull(skb, ieee80211_get_hdrlen(fc));
+ skb->pkt_type = PACKET_OTHERHOST;
+ skb->protocol = __constant_htons(ETH_P_80211_RAW);
+ memset(skb->cb, 0, sizeof(skb->cb));
+ netif_rx(skb);
+}
+
+
+/* Called only as a tasklet (software IRQ) */
+static struct ieee80211_frag_entry *
+ieee80211_frag_cache_find(struct ieee80211_device *ieee, unsigned int seq,
+ unsigned int frag, u8 tid, u8 *src, u8 *dst)
+{
+ struct ieee80211_frag_entry *entry;
+ int i;
+
+ for (i = 0; i < IEEE80211_FRAG_CACHE_LEN; i++) {
+ entry = &ieee->frag_cache[tid][i];
+ if (entry->skb != NULL &&
+ time_after(jiffies, entry->first_frag_time + 2 * HZ)) {
+ IEEE80211_DEBUG_FRAG(
+ "expiring fragment cache entry "
+ "seq=%u last_frag=%u\n",
+ entry->seq, entry->last_frag);
+ dev_kfree_skb_any(entry->skb);
+ entry->skb = NULL;
+ }
+
+ if (entry->skb != NULL && entry->seq == seq &&
+ (entry->last_frag + 1 == frag || frag == -1) &&
+ memcmp(entry->src_addr, src, ETH_ALEN) == 0 &&
+ memcmp(entry->dst_addr, dst, ETH_ALEN) == 0)
+ return entry;
+ }
+
+ return NULL;
+}
+
+/* Called only as a tasklet (software IRQ) */
+static struct sk_buff *
+ieee80211_frag_cache_get(struct ieee80211_device *ieee,
+ struct ieee80211_hdr_4addr *hdr)
+{
+ struct sk_buff *skb = NULL;
+ u16 fc = le16_to_cpu(hdr->frame_ctl);
+ u16 sc = le16_to_cpu(hdr->seq_ctl);
+ unsigned int frag = WLAN_GET_SEQ_FRAG(sc);
+ unsigned int seq = WLAN_GET_SEQ_SEQ(sc);
+ struct ieee80211_frag_entry *entry;
+ struct ieee80211_hdr_3addrqos *hdr_3addrqos;
+ struct ieee80211_hdr_4addrqos *hdr_4addrqos;
+ u8 tid;
+
+ if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
+ hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)hdr;
+ tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QOS_TID;
+ tid = UP2AC(tid);
+ tid++;
+ } else if (IEEE80211_QOS_HAS_SEQ(fc)) {
+ hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)hdr;
+ tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QOS_TID;
+ tid = UP2AC(tid);
+ tid++;
+ } else {
+ tid = 0;
+ }
+
+ if (frag == 0) {
+ /* Reserve enough space to fit maximum frame length */
+ skb = dev_alloc_skb(ieee->dev->mtu +
+ sizeof(struct ieee80211_hdr_4addr) +
+ 8 /* LLC */ +
+ 2 /* alignment */ +
+ 8 /* WEP */ +
+ ETH_ALEN /* WDS */ +
+ (IEEE80211_QOS_HAS_SEQ(fc) ? 2 : 0) /* QOS Control */);
+ if (skb == NULL)
+ return NULL;
+
+ entry = &ieee->frag_cache[tid][ieee->frag_next_idx[tid]];
+ ieee->frag_next_idx[tid]++;
+ if (ieee->frag_next_idx[tid] >= IEEE80211_FRAG_CACHE_LEN)
+ ieee->frag_next_idx[tid] = 0;
+
+ if (entry->skb != NULL)
+ dev_kfree_skb_any(entry->skb);
+
+ entry->first_frag_time = jiffies;
+ entry->seq = seq;
+ entry->last_frag = frag;
+ entry->skb = skb;
+ memcpy(entry->src_addr, hdr->addr2, ETH_ALEN);
+ memcpy(entry->dst_addr, hdr->addr1, ETH_ALEN);
+ } else {
+ /* received a fragment of a frame for which the head fragment
+ * should have already been received */
+ entry = ieee80211_frag_cache_find(ieee, seq, frag, tid, hdr->addr2,
+ hdr->addr1);
+ if (entry != NULL) {
+ entry->last_frag = frag;
+ skb = entry->skb;
+ }
+ }
+
+ return skb;
+}
+
+
+/* Called only as a tasklet (software IRQ) */
+static int ieee80211_frag_cache_invalidate(struct ieee80211_device *ieee,
+ struct ieee80211_hdr_4addr *hdr)
+{
+ u16 fc = le16_to_cpu(hdr->frame_ctl);
+ u16 sc = le16_to_cpu(hdr->seq_ctl);
+ unsigned int seq = WLAN_GET_SEQ_SEQ(sc);
+ struct ieee80211_frag_entry *entry;
+ struct ieee80211_hdr_3addrqos *hdr_3addrqos;
+ struct ieee80211_hdr_4addrqos *hdr_4addrqos;
+ u8 tid;
+
+ if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
+ hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)hdr;
+ tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QOS_TID;
+ tid = UP2AC(tid);
+ tid++;
+ } else if (IEEE80211_QOS_HAS_SEQ(fc)) {
+ hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)hdr;
+ tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QOS_TID;
+ tid = UP2AC(tid);
+ tid++;
+ } else {
+ tid = 0;
+ }
+
+ entry = ieee80211_frag_cache_find(ieee, seq, -1, tid, hdr->addr2,
+ hdr->addr1);
+
+ if (entry == NULL) {
+ IEEE80211_DEBUG_FRAG(
+ "could not invalidate fragment cache "
+ "entry (seq=%u)\n", seq);
+ return -1;
+ }
+
+ entry->skb = NULL;
+ return 0;
+}
+
+
+
+/* ieee80211_rx_frame_mgtmt
+ *
+ * Responsible for handling management control frames
+ *
+ * Called by ieee80211_rx */
+static inline int
+ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
+ struct ieee80211_rx_stats *rx_stats, u16 type,
+ u16 stype)
+{
+ struct ieee80211_hdr_4addr *hdr;
+
+ /* cheat the hdr type */
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
+
+ /* On the struct stats definition there is written that
+ * this is not mandatory.... but seems that the probe
+ * response parser uses it
+ */
+ rx_stats->len = skb->len;
+ ieee80211_rx_mgt(ieee, (struct ieee80211_hdr_4addr *)skb->data,
+ rx_stats);
+
+ if ((ieee->state == IEEE80211_LINKED) && (memcmp(hdr->addr3, ieee->current_network.bssid, ETH_ALEN))) {
+ dev_kfree_skb_any(skb);
+ return 0;
+ }
+
+ ieee80211_rx_frame_softmac(ieee, skb, rx_stats, type, stype);
+
+ dev_kfree_skb_any(skb);
+
+ return 0;
+
+}
+
+
+
+/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
+/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
+static unsigned char rfc1042_header[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
+/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
+static unsigned char bridge_tunnel_header[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
+/* No encapsulation header if EtherType < 0x600 (=length) */
+
+/* Called by ieee80211_rx_frame_decrypt */
+static int ieee80211_is_eapol_frame(struct ieee80211_device *ieee,
+ struct sk_buff *skb, size_t hdrlen)
+{
+ struct net_device *dev = ieee->dev;
+ u16 fc, ethertype;
+ struct ieee80211_hdr_4addr *hdr;
+ u8 *pos;
+
+ if (skb->len < 24)
+ return 0;
+
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
+ fc = le16_to_cpu(hdr->frame_ctl);
+
+ /* check that the frame is unicast frame to us */
+ if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
+ IEEE80211_FCTL_TODS &&
+ memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN) == 0 &&
+ memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN) == 0) {
+ /* ToDS frame with own addr BSSID and DA */
+ } else if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
+ IEEE80211_FCTL_FROMDS &&
+ memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN) == 0) {
+ /* FromDS frame with own addr as DA */
+ } else
+ return 0;
+
+ if (skb->len < 24 + 8)
+ return 0;
+
+ /* check for port access entity Ethernet type */
+// pos = skb->data + 24;
+ pos = skb->data + hdrlen;
+ ethertype = (pos[6] << 8) | pos[7];
+ if (ethertype == ETH_P_PAE)
+ return 1;
+
+ return 0;
+}
+
+/* Called only as a tasklet (software IRQ), by ieee80211_rx */
+static inline int
+ieee80211_rx_frame_decrypt(struct ieee80211_device *ieee, struct sk_buff *skb,
+ struct ieee80211_crypt_data *crypt)
+{
+ struct ieee80211_hdr_4addr *hdr;
+ int res, hdrlen;
+
+ if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
+ return 0;
+
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
+ hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
+
+#ifdef CONFIG_IEEE80211_CRYPT_TKIP
+ if (ieee->tkip_countermeasures &&
+ strcmp(crypt->ops->name, "TKIP") == 0) {
+ if (net_ratelimit()) {
+ netdev_dbg(ieee->dev,
+ "TKIP countermeasures: dropped received packet from %pM\n",
+ ieee->dev->name, hdr->addr2);
+ }
+ return -1;
+ }
+#endif
+
+ atomic_inc(&crypt->refcnt);
+ res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv);
+ atomic_dec(&crypt->refcnt);
+ if (res < 0) {
+ IEEE80211_DEBUG_DROP(
+ "decryption failed (SA=%pM"
+ ") res=%d\n", hdr->addr2, res);
+ if (res == -2)
+ IEEE80211_DEBUG_DROP("Decryption failed ICV "
+ "mismatch (key %d)\n",
+ skb->data[hdrlen + 3] >> 6);
+ ieee->ieee_stats.rx_discards_undecryptable++;
+ return -1;
+ }
+
+ return res;
+}
+
+
+/* Called only as a tasklet (software IRQ), by ieee80211_rx */
+static inline int
+ieee80211_rx_frame_decrypt_msdu(struct ieee80211_device *ieee,
+ struct sk_buff *skb, int keyidx,
+ struct ieee80211_crypt_data *crypt)
+{
+ struct ieee80211_hdr_4addr *hdr;
+ int res, hdrlen;
+
+ if (crypt == NULL || crypt->ops->decrypt_msdu == NULL)
+ return 0;
+
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
+ hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
+
+ atomic_inc(&crypt->refcnt);
+ res = crypt->ops->decrypt_msdu(skb, keyidx, hdrlen, crypt->priv);
+ atomic_dec(&crypt->refcnt);
+ if (res < 0) {
+ netdev_dbg(ieee->dev,
+ "MSDU decryption/MIC verification failed (SA=%pM keyidx=%d)\n",
+ hdr->addr2, keyidx);
+ return -1;
+ }
+
+ return 0;
+}
+
+
+/* this function is stolen from ipw2200 driver*/
+#define IEEE_PACKET_RETRY_TIME (5*HZ)
+static int is_duplicate_packet(struct ieee80211_device *ieee,
+ struct ieee80211_hdr_4addr *header)
+{
+ u16 fc = le16_to_cpu(header->frame_ctl);
+ u16 sc = le16_to_cpu(header->seq_ctl);
+ u16 seq = WLAN_GET_SEQ_SEQ(sc);
+ u16 frag = WLAN_GET_SEQ_FRAG(sc);
+ u16 *last_seq, *last_frag;
+ unsigned long *last_time;
+ struct ieee80211_hdr_3addrqos *hdr_3addrqos;
+ struct ieee80211_hdr_4addrqos *hdr_4addrqos;
+ u8 tid;
+
+ //TO2DS and QoS
+ if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
+ hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)header;
+ tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QOS_TID;
+ tid = UP2AC(tid);
+ tid++;
+ } else if (IEEE80211_QOS_HAS_SEQ(fc)) { //QoS
+ hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)header;
+ tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QOS_TID;
+ tid = UP2AC(tid);
+ tid++;
+ } else { // no QoS
+ tid = 0;
+ }
+ switch (ieee->iw_mode) {
+ case IW_MODE_ADHOC:
+ {
+ struct list_head *p;
+ struct ieee_ibss_seq *entry = NULL;
+ u8 *mac = header->addr2;
+ int index = mac[5] % IEEE_IBSS_MAC_HASH_SIZE;
+
+ list_for_each(p, &ieee->ibss_mac_hash[index]) {
+ entry = list_entry(p, struct ieee_ibss_seq, list);
+ if (!memcmp(entry->mac, mac, ETH_ALEN))
+ break;
+ }
+ // if (memcmp(entry->mac, mac, ETH_ALEN)){
+ if (p == &ieee->ibss_mac_hash[index]) {
+ entry = kmalloc(sizeof(struct ieee_ibss_seq), GFP_ATOMIC);
+ if (!entry)
+ return 0;
+
+ memcpy(entry->mac, mac, ETH_ALEN);
+ entry->seq_num[tid] = seq;
+ entry->frag_num[tid] = frag;
+ entry->packet_time[tid] = jiffies;
+ list_add(&entry->list, &ieee->ibss_mac_hash[index]);
+ return 0;
+ }
+ last_seq = &entry->seq_num[tid];
+ last_frag = &entry->frag_num[tid];
+ last_time = &entry->packet_time[tid];
+ break;
+ }
+
+ case IW_MODE_INFRA:
+ last_seq = &ieee->last_rxseq_num[tid];
+ last_frag = &ieee->last_rxfrag_num[tid];
+ last_time = &ieee->last_packet_time[tid];
+
+ break;
+ default:
+ return 0;
+ }
+
+// if(tid != 0) {
+// printk(KERN_WARNING ":)))))))))))%x %x %x, fc(%x)\n", tid, *last_seq, seq, header->frame_ctl);
+// }
+ if ((*last_seq == seq) &&
+ time_after(*last_time + IEEE_PACKET_RETRY_TIME, jiffies)) {
+ if (*last_frag == frag) {
+ //printk(KERN_WARNING "[1] go drop!\n");
+ goto drop;
+
+ }
+ if (*last_frag + 1 != frag)
+ /* out-of-order fragment */
+ //printk(KERN_WARNING "[2] go drop!\n");
+ goto drop;
+ } else
+ *last_seq = seq;
+
+ *last_frag = frag;
+ *last_time = jiffies;
+ return 0;
+
+drop:
+// BUG_ON(!(fc & IEEE80211_FCTL_RETRY));
+// printk("DUP\n");
+
+ return 1;
+}
+
+
+/* All received frames are sent to this function. @skb contains the frame in
+ * IEEE 802.11 format, i.e., in the format it was sent over air.
+ * This function is called only as a tasklet (software IRQ). */
+int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
+ struct ieee80211_rx_stats *rx_stats)
+{
+ struct net_device *dev = ieee->dev;
+ //struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+ struct ieee80211_hdr_4addr *hdr;
+
+ size_t hdrlen;
+ u16 fc, type, stype, sc;
+ struct net_device_stats *stats;
+ unsigned int frag;
+ u8 *payload;
+ u16 ethertype;
+ u8 dst[ETH_ALEN];
+ u8 src[ETH_ALEN];
+ u8 bssid[ETH_ALEN];
+ struct ieee80211_crypt_data *crypt = NULL;
+ int keyidx = 0;
+
+ /* cheat the hdr type */
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
+ stats = &ieee->stats;
+
+ if (skb->len < 10) {
+ netdev_info(ieee->dev, "SKB length < 10\n");
+ goto rx_dropped;
+ }
+
+ fc = le16_to_cpu(hdr->frame_ctl);
+ type = WLAN_FC_GET_TYPE(fc);
+ stype = WLAN_FC_GET_STYPE(fc);
+ sc = le16_to_cpu(hdr->seq_ctl);
+
+ frag = WLAN_GET_SEQ_FRAG(sc);
+
+//YJ,add,080828,for keep alive
+ if ((fc & IEEE80211_FCTL_TODS) != IEEE80211_FCTL_TODS) {
+ if (!memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN))
+ ieee->NumRxUnicast++;
+ } else {
+ if (!memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN))
+ ieee->NumRxUnicast++;
+ }
+//YJ,add,080828,for keep alive,end
+
+ hdrlen = ieee80211_get_hdrlen(fc);
+
+
+ if (ieee->iw_mode == IW_MODE_MONITOR) {
+ ieee80211_monitor_rx(ieee, skb, rx_stats);
+ stats->rx_packets++;
+ stats->rx_bytes += skb->len;
+ return 1;
+ }
+
+ if (ieee->host_decrypt) {
+ int idx = 0;
+ if (skb->len >= hdrlen + 3)
+ idx = skb->data[hdrlen + 3] >> 6;
+ crypt = ieee->crypt[idx];
+
+ /* allow NULL decrypt to indicate an station specific override
+ * for default encryption */
+ if (crypt && (crypt->ops == NULL ||
+ crypt->ops->decrypt_mpdu == NULL))
+ crypt = NULL;
+
+ if (!crypt && (fc & IEEE80211_FCTL_WEP)) {
+ /* This seems to be triggered by some (multicast?)
+ * frames from other than current BSS, so just drop the
+ * frames silently instead of filling system log with
+ * these reports. */
+ IEEE80211_DEBUG_DROP("Decryption failed (not set)"
+ " (SA=%pM)\n",
+ hdr->addr2);
+ ieee->ieee_stats.rx_discards_undecryptable++;
+ goto rx_dropped;
+ }
+ }
+
+ if (skb->len < IEEE80211_DATA_HDR3_LEN)
+ goto rx_dropped;
+
+ // if QoS enabled, should check the sequence for each of the AC
+ if (is_duplicate_packet(ieee, hdr))
+ goto rx_dropped;
+
+
+ if (type == IEEE80211_FTYPE_MGMT) {
+ if (ieee80211_rx_frame_mgmt(ieee, skb, rx_stats, type, stype))
+ goto rx_dropped;
+ else
+ goto rx_exit;
+ }
+
+ /* Data frame - extract src/dst addresses */
+ switch (fc & (IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) {
+ case IEEE80211_FCTL_FROMDS:
+ memcpy(dst, hdr->addr1, ETH_ALEN);
+ memcpy(src, hdr->addr3, ETH_ALEN);
+ memcpy(bssid, hdr->addr2, ETH_ALEN);
+ break;
+ case IEEE80211_FCTL_TODS:
+ memcpy(dst, hdr->addr3, ETH_ALEN);
+ memcpy(src, hdr->addr2, ETH_ALEN);
+ memcpy(bssid, hdr->addr1, ETH_ALEN);
+ break;
+ case IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS:
+ if (skb->len < IEEE80211_DATA_HDR4_LEN)
+ goto rx_dropped;
+ memcpy(dst, hdr->addr3, ETH_ALEN);
+ memcpy(src, hdr->addr4, ETH_ALEN);
+ memcpy(bssid, ieee->current_network.bssid, ETH_ALEN);
+ break;
+ case 0:
+ memcpy(dst, hdr->addr1, ETH_ALEN);
+ memcpy(src, hdr->addr2, ETH_ALEN);
+ memcpy(bssid, hdr->addr3, ETH_ALEN);
+ break;
+ }
+
+
+ dev->last_rx = jiffies;
+
+
+ /* Nullfunc frames may have PS-bit set, so they must be passed to
+ * hostap_handle_sta_rx() before being dropped here. */
+ if (stype != IEEE80211_STYPE_DATA &&
+ stype != IEEE80211_STYPE_DATA_CFACK &&
+ stype != IEEE80211_STYPE_DATA_CFPOLL &&
+ stype != IEEE80211_STYPE_DATA_CFACKPOLL &&
+ stype != IEEE80211_STYPE_QOS_DATA//add by David,2006.8.4
+ ) {
+ if (stype != IEEE80211_STYPE_NULLFUNC)
+ IEEE80211_DEBUG_DROP(
+ "RX: dropped data frame "
+ "with no data (type=0x%02x, "
+ "subtype=0x%02x, len=%d)\n",
+ type, stype, skb->len);
+ goto rx_dropped;
+ }
+ if (memcmp(bssid, ieee->current_network.bssid, ETH_ALEN))
+ goto rx_dropped;
+
+ ieee->NumRxDataInPeriod++;
+ ieee->NumRxOkTotal++;
+ /* skb: hdr + (possibly fragmented, possibly encrypted) payload */
+
+ if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
+ (keyidx = ieee80211_rx_frame_decrypt(ieee, skb, crypt)) < 0)
+ goto rx_dropped;
+
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
+
+ /* skb: hdr + (possibly fragmented) plaintext payload */
+ // PR: FIXME: hostap has additional conditions in the "if" below:
+ // ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
+ if ((frag != 0 || (fc & IEEE80211_FCTL_MOREFRAGS))) {
+ int flen;
+ struct sk_buff *frag_skb = ieee80211_frag_cache_get(ieee, hdr);
+ IEEE80211_DEBUG_FRAG("Rx Fragment received (%u)\n", frag);
+
+ if (!frag_skb) {
+ IEEE80211_DEBUG(IEEE80211_DL_RX | IEEE80211_DL_FRAG,
+ "Rx cannot get skb from fragment "
+ "cache (morefrag=%d seq=%u frag=%u)\n",
+ (fc & IEEE80211_FCTL_MOREFRAGS) != 0,
+ WLAN_GET_SEQ_SEQ(sc), frag);
+ goto rx_dropped;
+ }
+ flen = skb->len;
+ if (frag != 0)
+ flen -= hdrlen;
+
+ if (frag_skb->tail + flen > frag_skb->end) {
+ netdev_warn(ieee->dev,
+ "host decrypted and reassembled frame did not fit skb\n");
+ ieee80211_frag_cache_invalidate(ieee, hdr);
+ goto rx_dropped;
+ }
+
+ if (frag == 0) {
+ /* copy first fragment (including full headers) into
+ * beginning of the fragment cache skb */
+ memcpy(skb_put(frag_skb, flen), skb->data, flen);
+ } else {
+ /* append frame payload to the end of the fragment
+ * cache skb */
+ memcpy(skb_put(frag_skb, flen), skb->data + hdrlen,
+ flen);
+ }
+ dev_kfree_skb_any(skb);
+ skb = NULL;
+
+ if (fc & IEEE80211_FCTL_MOREFRAGS) {
+ /* more fragments expected - leave the skb in fragment
+ * cache for now; it will be delivered to upper layers
+ * after all fragments have been received */
+ goto rx_exit;
+ }
+
+ /* this was the last fragment and the frame will be
+ * delivered, so remove skb from fragment cache */
+ skb = frag_skb;
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
+ ieee80211_frag_cache_invalidate(ieee, hdr);
+ }
+
+ /* skb: hdr + (possible reassembled) full MSDU payload; possibly still
+ * encrypted/authenticated */
+ if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
+ ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt))
+ goto rx_dropped;
+
+ hdr = (struct ieee80211_hdr_4addr *)skb->data;
+ if (crypt && !(fc & IEEE80211_FCTL_WEP) && !ieee->open_wep) {
+ if (/*ieee->ieee802_1x &&*/
+ ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
+
+#ifdef CONFIG_IEEE80211_DEBUG
+ /* pass unencrypted EAPOL frames even if encryption is
+ * configured */
+ struct eapol *eap = (struct eapol *)(skb->data +
+ 24);
+ IEEE80211_DEBUG_EAP("RX: IEEE 802.1X EAPOL frame: %s\n",
+ eap_get_type(eap->type));
+#endif
+ } else {
+ IEEE80211_DEBUG_DROP(
+ "encryption configured, but RX "
+ "frame not encrypted (SA=%pM)\n",
+ hdr->addr2);
+ goto rx_dropped;
+ }
+ }
+
+#ifdef CONFIG_IEEE80211_DEBUG
+ if (crypt && !(fc & IEEE80211_FCTL_WEP) &&
+ ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
+ struct eapol *eap = (struct eapol *)(skb->data +
+ 24);
+ IEEE80211_DEBUG_EAP("RX: IEEE 802.1X EAPOL frame: %s\n",
+ eap_get_type(eap->type));
+ }
+#endif
+
+ if (crypt && !(fc & IEEE80211_FCTL_WEP) && !ieee->open_wep &&
+ !ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
+ IEEE80211_DEBUG_DROP(
+ "dropped unencrypted RX data "
+ "frame from %pM"
+ " (drop_unencrypted=1)\n",
+ hdr->addr2);
+ goto rx_dropped;
+ }
+/*
+ if(ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
+ printk(KERN_WARNING "RX: IEEE802.1X EPAOL frame!\n");
+ }
+*/
+ /* skb: hdr + (possible reassembled) full plaintext payload */
+ payload = skb->data + hdrlen;
+ ethertype = (payload[6] << 8) | payload[7];
+
+
+ /* convert hdr + possible LLC headers into Ethernet header */
+ if (skb->len - hdrlen >= 8 &&
+ ((memcmp(payload, rfc1042_header, SNAP_SIZE) == 0 &&
+ ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
+ memcmp(payload, bridge_tunnel_header, SNAP_SIZE) == 0)) {
+ /* remove RFC1042 or Bridge-Tunnel encapsulation and
+ * replace EtherType */
+ skb_pull(skb, hdrlen + SNAP_SIZE);
+ memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
+ memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
+ } else {
+ u16 len;
+ /* Leave Ethernet header part of hdr and full payload */
+ skb_pull(skb, hdrlen);
+ len = htons(skb->len);
+ memcpy(skb_push(skb, 2), &len, 2);
+ memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
+ memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
+ }
+
+
+ stats->rx_packets++;
+ stats->rx_bytes += skb->len;
+
+ if (skb) {
+ skb->protocol = eth_type_trans(skb, dev);
+ memset(skb->cb, 0, sizeof(skb->cb));
+ skb->dev = dev;
+ skb->ip_summed = CHECKSUM_NONE; /* 802.11 crc not sufficient */
+ ieee->last_rx_ps_time = jiffies;
+ netif_rx(skb);
+ }
+
+ rx_exit:
+ return 1;
+
+ rx_dropped:
+ stats->rx_dropped++;
+
+ /* Returning 0 indicates to caller that we have not handled the SKB--
+ * so it is still allocated and can be used again by underlying
+ * hardware as a DMA target */
+ return 0;
+}
+
+#define MGMT_FRAME_FIXED_PART_LENGTH 0x24
+
+static inline int ieee80211_is_ofdm_rate(u8 rate)
+{
+ switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
+ case IEEE80211_OFDM_RATE_6MB:
+ case IEEE80211_OFDM_RATE_9MB:
+ case IEEE80211_OFDM_RATE_12MB:
+ case IEEE80211_OFDM_RATE_18MB:
+ case IEEE80211_OFDM_RATE_24MB:
+ case IEEE80211_OFDM_RATE_36MB:
+ case IEEE80211_OFDM_RATE_48MB:
+ case IEEE80211_OFDM_RATE_54MB:
+ return 1;
+ }
+ return 0;
+}
+
+static inline int ieee80211_SignalStrengthTranslate(int CurrSS)
+{
+ int RetSS;
+
+ // Step 1. Scale mapping.
+ if (CurrSS >= 71 && CurrSS <= 100)
+ RetSS = 90 + ((CurrSS - 70) / 3);
+ else if (CurrSS >= 41 && CurrSS <= 70)
+ RetSS = 78 + ((CurrSS - 40) / 3);
+ else if (CurrSS >= 31 && CurrSS <= 40)
+ RetSS = 66 + (CurrSS - 30);
+ else if (CurrSS >= 21 && CurrSS <= 30)
+ RetSS = 54 + (CurrSS - 20);
+ else if (CurrSS >= 5 && CurrSS <= 20)
+ RetSS = 42 + (((CurrSS - 5) * 2) / 3);
+ else if (CurrSS == 4)
+ RetSS = 36;
+ else if (CurrSS == 3)
+ RetSS = 27;
+ else if (CurrSS == 2)
+ RetSS = 18;
+ else if (CurrSS == 1)
+ RetSS = 9;
+ else
+ RetSS = CurrSS;
+
+ //RT_TRACE(COMP_DBG, DBG_LOUD, ("##### After Mapping: LastSS: %d, CurrSS: %d, RetSS: %d\n", LastSS, CurrSS, RetSS));
+
+ // Step 2. Smoothing.
+
+ //RT_TRACE(COMP_DBG, DBG_LOUD, ("$$$$$ After Smoothing: LastSS: %d, CurrSS: %d, RetSS: %d\n", LastSS, CurrSS, RetSS));
+
+ return RetSS;
+}
+
+static inline void
+ieee80211_extract_country_ie(struct ieee80211_device *ieee,
+ struct ieee80211_info_element *info_element,
+ struct ieee80211_network *network, u8 *addr2)
+{
+ if (IS_DOT11D_ENABLE(ieee)) {
+ if (info_element->len != 0) {
+ memcpy(network->CountryIeBuf, info_element->data, info_element->len);
+ network->CountryIeLen = info_element->len;
+
+ if (!IS_COUNTRY_IE_VALID(ieee))
+ Dot11d_UpdateCountryIe(ieee, addr2, info_element->len, info_element->data);
+ }
+
+ //
+ // 070305, rcnjko: I update country IE watch dog here because
+ // some AP (e.g. Cisco 1242) don't include country IE in their
+ // probe response frame.
+ //
+ if (IS_EQUAL_CIE_SRC(ieee, addr2))
+ UPDATE_CIE_WATCHDOG(ieee);
+ }
+
+}
+
+/* SignalStrengthIndex is 0-100 */
+static int ieee80211_TranslateToDbm(unsigned char SignalStrengthIndex)
+{
+ unsigned char SignalPower; // in dBm.
+
+ // Translate to dBm (x=0.5y-95).
+ SignalPower = (int)SignalStrengthIndex * 7 / 10;
+ SignalPower -= 95;
+
+ return SignalPower;
+}
+inline int ieee80211_network_init(
+ struct ieee80211_device *ieee,
+ struct ieee80211_probe_response *beacon,
+ struct ieee80211_network *network,
+ struct ieee80211_rx_stats *stats)
+{
+#ifdef CONFIG_IEEE80211_DEBUG
+ char rates_str[64];
+ char *p;
+#endif
+ struct ieee80211_info_element *info_element;
+ u16 left;
+ u8 i;
+ short offset;
+ u8 curRate = 0, hOpRate = 0, curRate_ex = 0;
+
+ /* Pull out fixed field data */
+ memcpy(network->bssid, beacon->header.addr3, ETH_ALEN);
+ network->capability = beacon->capability;
+ network->last_scanned = jiffies;
+ network->time_stamp[0] = beacon->time_stamp[0];
+ network->time_stamp[1] = beacon->time_stamp[1];
+ network->beacon_interval = beacon->beacon_interval;
+ /* Where to pull this? beacon->listen_interval;*/
+ network->listen_interval = 0x0A;
+ network->rates_len = network->rates_ex_len = 0;
+ network->last_associate = 0;
+ network->ssid_len = 0;
+ network->flags = 0;
+ network->atim_window = 0;
+ network->QoS_Enable = 0;
+//by amy 080312
+ network->HighestOperaRate = 0;
+//by amy 080312
+ network->Turbo_Enable = 0;
+ network->CountryIeLen = 0;
+ memset(network->CountryIeBuf, 0, MAX_IE_LEN);
+
+ if (stats->freq == IEEE80211_52GHZ_BAND) {
+ /* for A band (No DS info) */
+ network->channel = stats->received_channel;
+ } else
+ network->flags |= NETWORK_HAS_CCK;
+
+ network->wpa_ie_len = 0;
+ network->rsn_ie_len = 0;
+
+ info_element = &beacon->info_element;
+ left = stats->len - ((void *)info_element - (void *)beacon);
+ while (left >= sizeof(struct ieee80211_info_element_hdr)) {
+ if (sizeof(struct ieee80211_info_element_hdr) + info_element->len > left) {
+ IEEE80211_DEBUG_SCAN("SCAN: parse failed: info_element->len + 2 > left : info_element->len+2=%d left=%d.\n",
+ info_element->len + sizeof(struct ieee80211_info_element),
+ left);
+ return 1;
+ }
+
+ switch (info_element->id) {
+ case MFIE_TYPE_SSID:
+ if (ieee80211_is_empty_essid(info_element->data,
+ info_element->len)) {
+ network->flags |= NETWORK_EMPTY_ESSID;
+ break;
+ }
+
+ network->ssid_len = min(info_element->len,
+ (u8)IW_ESSID_MAX_SIZE);
+ memcpy(network->ssid, info_element->data, network->ssid_len);
+ if (network->ssid_len < IW_ESSID_MAX_SIZE)
+ memset(network->ssid + network->ssid_len, 0,
+ IW_ESSID_MAX_SIZE - network->ssid_len);
+
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_SSID: '%s' len=%d.\n",
+ network->ssid, network->ssid_len);
+ break;
+
+ case MFIE_TYPE_RATES:
+#ifdef CONFIG_IEEE80211_DEBUG
+ p = rates_str;
+#endif
+ network->rates_len = min(info_element->len, MAX_RATES_LENGTH);
+ for (i = 0; i < network->rates_len; i++) {
+ network->rates[i] = info_element->data[i];
+ curRate = network->rates[i] & 0x7f;
+ if (hOpRate < curRate)
+ hOpRate = curRate;
+#ifdef CONFIG_IEEE80211_DEBUG
+ p += snprintf(p, sizeof(rates_str) - (p - rates_str), "%02X ", network->rates[i]);
+#endif
+ if (ieee80211_is_ofdm_rate(info_element->data[i])) {
+ network->flags |= NETWORK_HAS_OFDM;
+ if (info_element->data[i] &
+ IEEE80211_BASIC_RATE_MASK)
+ network->flags &=
+ ~NETWORK_HAS_CCK;
+ }
+ }
+
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_RATES: '%s' (%d)\n",
+ rates_str, network->rates_len);
+ break;
+
+ case MFIE_TYPE_RATES_EX:
+#ifdef CONFIG_IEEE80211_DEBUG
+ p = rates_str;
+#endif
+ network->rates_ex_len = min(info_element->len, MAX_RATES_EX_LENGTH);
+ for (i = 0; i < network->rates_ex_len; i++) {
+ network->rates_ex[i] = info_element->data[i];
+ curRate_ex = network->rates_ex[i] & 0x7f;
+ if (hOpRate < curRate_ex)
+ hOpRate = curRate_ex;
+#ifdef CONFIG_IEEE80211_DEBUG
+ p += snprintf(p, sizeof(rates_str) - (p - rates_str), "%02X ", network->rates[i]);
+#endif
+ if (ieee80211_is_ofdm_rate(info_element->data[i])) {
+ network->flags |= NETWORK_HAS_OFDM;
+ if (info_element->data[i] &
+ IEEE80211_BASIC_RATE_MASK)
+ network->flags &=
+ ~NETWORK_HAS_CCK;
+ }
+ }
+
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_RATES_EX: '%s' (%d)\n",
+ rates_str, network->rates_ex_len);
+ break;
+
+ case MFIE_TYPE_DS_SET:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_DS_SET: %d\n",
+ info_element->data[0]);
+ if (stats->freq == IEEE80211_24GHZ_BAND)
+ network->channel = info_element->data[0];
+ break;
+
+ case MFIE_TYPE_FH_SET:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_FH_SET: ignored\n");
+ break;
+
+ case MFIE_TYPE_CF_SET:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_CF_SET: ignored\n");
+ break;
+
+ case MFIE_TYPE_TIM:
+
+ if (info_element->len < 4)
+ break;
+
+ network->dtim_period = info_element->data[1];
+
+ if (ieee->state != IEEE80211_LINKED)
+ break;
+
+ network->last_dtim_sta_time[0] = jiffies;
+ network->last_dtim_sta_time[1] = stats->mac_time[1];
+
+ network->dtim_data = IEEE80211_DTIM_VALID;
+
+ if (info_element->data[0] != 0)
+ break;
+
+ if (info_element->data[2] & 1)
+ network->dtim_data |= IEEE80211_DTIM_MBCAST;
+
+ offset = (info_element->data[2] >> 1)*2;
+
+ //printk("offset1:%x aid:%x\n",offset, ieee->assoc_id);
+
+ /* add and modified for ps 2008.1.22 */
+ if (ieee->assoc_id < 8*offset ||
+ ieee->assoc_id > 8*(offset + info_element->len - 3)) {
+ break;
+ }
+
+ offset = (ieee->assoc_id/8) - offset;// + ((aid % 8)? 0 : 1) ;
+
+ // printk("offset:%x data:%x, ucast:%d\n", offset,
+ // info_element->data[3+offset] ,
+ // info_element->data[3+offset] & (1<<(ieee->assoc_id%8)));
+
+ if (info_element->data[3+offset] & (1<<(ieee->assoc_id%8)))
+ network->dtim_data |= IEEE80211_DTIM_UCAST;
+
+ break;
+
+ case MFIE_TYPE_IBSS_SET:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_IBSS_SET: ignored\n");
+ break;
+
+ case MFIE_TYPE_CHALLENGE:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_CHALLENGE: ignored\n");
+ break;
+
+ case MFIE_TYPE_GENERIC:
+ //nic is 87B
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_GENERIC: %d bytes\n",
+ info_element->len);
+ if (info_element->len >= 4 &&
+ info_element->data[0] == 0x00 &&
+ info_element->data[1] == 0x50 &&
+ info_element->data[2] == 0xf2 &&
+ info_element->data[3] == 0x01) {
+ network->wpa_ie_len = min(info_element->len + 2,
+ MAX_WPA_IE_LEN);
+ memcpy(network->wpa_ie, info_element,
+ network->wpa_ie_len);
+ }
+
+ if (info_element->len == 7 &&
+ info_element->data[0] == 0x00 &&
+ info_element->data[1] == 0xe0 &&
+ info_element->data[2] == 0x4c &&
+ info_element->data[3] == 0x01 &&
+ info_element->data[4] == 0x02) {
+ network->Turbo_Enable = 1;
+ }
+ if (1 == stats->nic_type) //nic 87
+ break;
+
+ if (info_element->len >= 5 &&
+ info_element->data[0] == 0x00 &&
+ info_element->data[1] == 0x50 &&
+ info_element->data[2] == 0xf2 &&
+ info_element->data[3] == 0x02 &&
+ info_element->data[4] == 0x00) {
+ //printk(KERN_WARNING "wmm info updated: %x\n", info_element->data[6]);
+ //WMM Information Element
+ network->wmm_info = info_element->data[6];
+ network->QoS_Enable = 1;
+ }
+
+ if (info_element->len >= 8 &&
+ info_element->data[0] == 0x00 &&
+ info_element->data[1] == 0x50 &&
+ info_element->data[2] == 0xf2 &&
+ info_element->data[3] == 0x02 &&
+ info_element->data[4] == 0x01) {
+ // Not care about version at present.
+ //WMM Information Element
+ //printk(KERN_WARNING "wmm info¶m updated: %x\n", info_element->data[6]);
+ network->wmm_info = info_element->data[6];
+ //WMM Parameter Element
+ memcpy(network->wmm_param, (u8 *)(info_element->data + 8), (info_element->len - 8));
+ network->QoS_Enable = 1;
+ }
+ break;
+
+ case MFIE_TYPE_RSN:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_RSN: %d bytes\n",
+ info_element->len);
+ network->rsn_ie_len = min(info_element->len + 2,
+ MAX_WPA_IE_LEN);
+ memcpy(network->rsn_ie, info_element,
+ network->rsn_ie_len);
+ break;
+ case MFIE_TYPE_COUNTRY:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_COUNTRY: %d bytes\n",
+ info_element->len);
+// printk("=====>Receive <%s> Country IE\n",network->ssid);
+ ieee80211_extract_country_ie(ieee, info_element, network, beacon->header.addr2);
+ break;
+ default:
+ IEEE80211_DEBUG_SCAN("unsupported IE %d\n",
+ info_element->id);
+ break;
+ }
+
+ left -= sizeof(struct ieee80211_info_element_hdr) +
+ info_element->len;
+ info_element = (struct ieee80211_info_element *)
+ &info_element->data[info_element->len];
+ }
+//by amy 080312
+ network->HighestOperaRate = hOpRate;
+//by amy 080312
+ network->mode = 0;
+ if (stats->freq == IEEE80211_52GHZ_BAND)
+ network->mode = IEEE_A;
+ else {
+ if (network->flags & NETWORK_HAS_OFDM)
+ network->mode |= IEEE_G;
+ if (network->flags & NETWORK_HAS_CCK)
+ network->mode |= IEEE_B;
+ }
+
+ if (network->mode == 0) {
+ IEEE80211_DEBUG_SCAN("Filtered out '%s (%pM)' "
+ "network.\n",
+ escape_essid(network->ssid,
+ network->ssid_len),
+ network->bssid);
+ return 1;
+ }
+
+ if (ieee80211_is_empty_essid(network->ssid, network->ssid_len))
+ network->flags |= NETWORK_EMPTY_ESSID;
+
+ stats->signal = ieee80211_TranslateToDbm(stats->signalstrength);
+ //stats->noise = stats->signal - stats->noise;
+ stats->noise = ieee80211_TranslateToDbm(100 - stats->signalstrength) - 25;
+ memcpy(&network->stats, stats, sizeof(network->stats));
+
+ return 0;
+}
+
+static inline int is_same_network(struct ieee80211_network *src,
+ struct ieee80211_network *dst,
+ struct ieee80211_device *ieee)
+{
+ /* A network is only a duplicate if the channel, BSSID, ESSID
+ * and the capability field (in particular IBSS and BSS) all match.
+ * We treat all <hidden> with the same BSSID and channel
+ * as one network */
+ return (((src->ssid_len == dst->ssid_len) || (ieee->iw_mode == IW_MODE_INFRA)) && //YJ,mod,080819,for hidden ap
+ //((src->ssid_len == dst->ssid_len) &&
+ (src->channel == dst->channel) &&
+ !memcmp(src->bssid, dst->bssid, ETH_ALEN) &&
+ (!memcmp(src->ssid, dst->ssid, src->ssid_len) || (ieee->iw_mode == IW_MODE_INFRA)) && //YJ,mod,080819,for hidden ap
+ //!memcmp(src->ssid, dst->ssid, src->ssid_len) &&
+ ((src->capability & WLAN_CAPABILITY_IBSS) ==
+ (dst->capability & WLAN_CAPABILITY_IBSS)) &&
+ ((src->capability & WLAN_CAPABILITY_BSS) ==
+ (dst->capability & WLAN_CAPABILITY_BSS)));
+}
+
+inline void update_network(struct ieee80211_network *dst,
+ struct ieee80211_network *src)
+{
+ unsigned char quality = src->stats.signalstrength;
+ unsigned char signal = 0;
+ unsigned char noise = 0;
+ if (dst->stats.signalstrength > 0)
+ quality = (dst->stats.signalstrength * 5 + src->stats.signalstrength + 5)/6;
+ signal = ieee80211_TranslateToDbm(quality);
+ //noise = signal - src->stats.noise;
+ if (dst->stats.noise > 0)
+ noise = (dst->stats.noise * 5 + src->stats.noise)/6;
+ //if(strcmp(dst->ssid, "linksys_lzm000") == 0)
+// printk("ssid:%s, quality:%d, signal:%d\n", dst->ssid, quality, signal);
+ memcpy(&dst->stats, &src->stats, sizeof(struct ieee80211_rx_stats));
+ dst->stats.signalstrength = quality;
+ dst->stats.signal = signal;
+// printk("==================>stats.signal is %d\n",dst->stats.signal);
+ dst->stats.noise = noise;
+
+
+ dst->capability = src->capability;
+ memcpy(dst->rates, src->rates, src->rates_len);
+ dst->rates_len = src->rates_len;
+ memcpy(dst->rates_ex, src->rates_ex, src->rates_ex_len);
+ dst->rates_ex_len = src->rates_ex_len;
+ dst->HighestOperaRate = src->HighestOperaRate;
+ //printk("==========>in %s: src->ssid is %s,chan is %d\n",__func__,src->ssid,src->channel);
+
+ //YJ,add,080819,for hidden ap
+ if (src->ssid_len > 0) {
+ //if(src->ssid_len == 13)
+ // printk("=====================>>>>>>>> Dst ssid: %s Src ssid: %s\n", dst->ssid, src->ssid);
+ memset(dst->ssid, 0, dst->ssid_len);
+ dst->ssid_len = src->ssid_len;
+ memcpy(dst->ssid, src->ssid, src->ssid_len);
+ }
+ //YJ,add,080819,for hidden ap,end
+
+ dst->channel = src->channel;
+ dst->mode = src->mode;
+ dst->flags = src->flags;
+ dst->time_stamp[0] = src->time_stamp[0];
+ dst->time_stamp[1] = src->time_stamp[1];
+
+ dst->beacon_interval = src->beacon_interval;
+ dst->listen_interval = src->listen_interval;
+ dst->atim_window = src->atim_window;
+ dst->dtim_period = src->dtim_period;
+ dst->dtim_data = src->dtim_data;
+ dst->last_dtim_sta_time[0] = src->last_dtim_sta_time[0];
+ dst->last_dtim_sta_time[1] = src->last_dtim_sta_time[1];
+// printk("update:%s, dtim_period:%x, dtim_data:%x\n", src->ssid, src->dtim_period, src->dtim_data);
+ memcpy(dst->wpa_ie, src->wpa_ie, src->wpa_ie_len);
+ dst->wpa_ie_len = src->wpa_ie_len;
+ memcpy(dst->rsn_ie, src->rsn_ie, src->rsn_ie_len);
+ dst->rsn_ie_len = src->rsn_ie_len;
+
+ dst->last_scanned = jiffies;
+ /* dst->last_associate is not overwritten */
+// disable QoS process now, added by David 2006/7/25
+#if 1
+ dst->wmm_info = src->wmm_info; //sure to exist in beacon or probe response frame.
+/*
+ if((dst->wmm_info^src->wmm_info)&0x0f) {//Param Set Count change, update Parameter
+ memcpy(dst->wmm_param, src->wmm_param, IEEE80211_AC_PRAM_LEN);
+ }
+*/
+ if (src->wmm_param[0].ac_aci_acm_aifsn || \
+ src->wmm_param[1].ac_aci_acm_aifsn || \
+ src->wmm_param[2].ac_aci_acm_aifsn || \
+ src->wmm_param[3].ac_aci_acm_aifsn) {
+ memcpy(dst->wmm_param, src->wmm_param, WME_AC_PRAM_LEN);
+ }
+ dst->QoS_Enable = src->QoS_Enable;
+#else
+ dst->QoS_Enable = 1;//for Rtl8187 simulation
+#endif
+ dst->SignalStrength = src->SignalStrength;
+ dst->Turbo_Enable = src->Turbo_Enable;
+ dst->CountryIeLen = src->CountryIeLen;
+ memcpy(dst->CountryIeBuf, src->CountryIeBuf, src->CountryIeLen);
+}
+
+
+inline void
+ieee80211_process_probe_response(struct ieee80211_device *ieee,
+ struct ieee80211_probe_response *beacon,
+ struct ieee80211_rx_stats *stats)
+{
+ struct ieee80211_network network;
+ struct ieee80211_network *target;
+ struct ieee80211_network *oldest = NULL;
+#ifdef CONFIG_IEEE80211_DEBUG
+ struct ieee80211_info_element *info_element = &beacon->info_element;
+#endif
+ unsigned long flags;
+ short renew;
+ u8 wmm_info;
+ u8 is_beacon = (WLAN_FC_GET_STYPE(beacon->header.frame_ctl) == IEEE80211_STYPE_BEACON) ? 1 : 0; //YJ,add,080819,for hidden ap
+
+ memset(&network, 0, sizeof(struct ieee80211_network));
+
+ IEEE80211_DEBUG_SCAN(
+ "'%s' (%pM): %c%c%c%c %c%c%c%c-%c%c%c%c %c%c%c%c\n",
+ escape_essid(info_element->data, info_element->len),
+ beacon->header.addr3,
+ (beacon->capability & (1<<0xf)) ? '1' : '0',
+ (beacon->capability & (1<<0xe)) ? '1' : '0',
+ (beacon->capability & (1<<0xd)) ? '1' : '0',
+ (beacon->capability & (1<<0xc)) ? '1' : '0',
+ (beacon->capability & (1<<0xb)) ? '1' : '0',
+ (beacon->capability & (1<<0xa)) ? '1' : '0',
+ (beacon->capability & (1<<0x9)) ? '1' : '0',
+ (beacon->capability & (1<<0x8)) ? '1' : '0',
+ (beacon->capability & (1<<0x7)) ? '1' : '0',
+ (beacon->capability & (1<<0x6)) ? '1' : '0',
+ (beacon->capability & (1<<0x5)) ? '1' : '0',
+ (beacon->capability & (1<<0x4)) ? '1' : '0',
+ (beacon->capability & (1<<0x3)) ? '1' : '0',
+ (beacon->capability & (1<<0x2)) ? '1' : '0',
+ (beacon->capability & (1<<0x1)) ? '1' : '0',
+ (beacon->capability & (1<<0x0)) ? '1' : '0');
+
+ if (ieee80211_network_init(ieee, beacon, &network, stats)) {
+ IEEE80211_DEBUG_SCAN("Dropped '%s' (%pM) via %s.\n",
+ escape_essid(info_element->data,
+ info_element->len),
+ beacon->header.addr3,
+ WLAN_FC_GET_STYPE(beacon->header.frame_ctl) ==
+ IEEE80211_STYPE_PROBE_RESP ?
+ "PROBE RESPONSE" : "BEACON");
+ return;
+ }
+
+ // For Asus EeePc request,
+ // (1) if wireless adapter receive get any 802.11d country code in AP beacon,
+ // wireless adapter should follow the country code.
+ // (2) If there is no any country code in beacon,
+ // then wireless adapter should do active scan from ch1~11 and
+ // passive scan from ch12~14
+ if (ieee->bGlobalDomain) {
+ if (WLAN_FC_GET_STYPE(beacon->header.frame_ctl) == IEEE80211_STYPE_PROBE_RESP) {
+ // Case 1: Country code
+ if (IS_COUNTRY_IE_VALID(ieee)) {
+ if (!IsLegalChannel(ieee, network.channel)) {
+ printk("GetScanInfo(): For Country code, filter probe response at channel(%d).\n", network.channel);
+ return;
+ }
+ }
+ // Case 2: No any country code.
+ else {
+ // Filter over channel ch12~14
+ if (network.channel > 11) {
+ printk("GetScanInfo(): For Global Domain, filter probe response at channel(%d).\n", network.channel);
+ return;
+ }
+ }
+ } else {
+ // Case 1: Country code
+ if (IS_COUNTRY_IE_VALID(ieee)) {
+ if (!IsLegalChannel(ieee, network.channel)) {
+ printk("GetScanInfo(): For Country code, filter beacon at channel(%d).\n", network.channel);
+ return;
+ }
+ }
+ // Case 2: No any country code.
+ else {
+ // Filter over channel ch12~14
+ if (network.channel > 14) {
+ printk("GetScanInfo(): For Global Domain, filter beacon at channel(%d).\n", network.channel);
+ return;
+ }
+ }
+ }
+ }
+ /* The network parsed correctly -- so now we scan our known networks
+ * to see if we can find it in our list.
+ *
+ * NOTE: This search is definitely not optimized. Once its doing
+ * the "right thing" we'll optimize it for efficiency if
+ * necessary */
+
+ /* Search for this entry in the list and update it if it is
+ * already there. */
+
+ spin_lock_irqsave(&ieee->lock, flags);
+
+ if (is_same_network(&ieee->current_network, &network, ieee)) {
+ wmm_info = ieee->current_network.wmm_info;
+ //YJ,add,080819,for hidden ap
+ if (is_beacon == 0)
+ network.flags = (~NETWORK_EMPTY_ESSID & network.flags)|(NETWORK_EMPTY_ESSID & ieee->current_network.flags);
+ else if (ieee->state == IEEE80211_LINKED)
+ ieee->NumRxBcnInPeriod++;
+ //YJ,add,080819,for hidden ap,end
+ //printk("====>network.ssid=%s cur_ssid=%s\n", network.ssid, ieee->current_network.ssid);
+ update_network(&ieee->current_network, &network);
+ }
+
+ list_for_each_entry(target, &ieee->network_list, list) {
+ if (is_same_network(target, &network, ieee))
+ break;
+ if ((oldest == NULL) ||
+ (target->last_scanned < oldest->last_scanned))
+ oldest = target;
+ }
+
+ /* If we didn't find a match, then get a new network slot to initialize
+ * with this beacon's information */
+ if (&target->list == &ieee->network_list) {
+ if (list_empty(&ieee->network_free_list)) {
+ /* If there are no more slots, expire the oldest */
+ list_del(&oldest->list);
+ target = oldest;
+ IEEE80211_DEBUG_SCAN("Expired '%s' (%pM) from "
+ "network list.\n",
+ escape_essid(target->ssid,
+ target->ssid_len),
+ target->bssid);
+ } else {
+ /* Otherwise just pull from the free list */
+ target = list_entry(ieee->network_free_list.next,
+ struct ieee80211_network, list);
+ list_del(ieee->network_free_list.next);
+ }
+
+
+#ifdef CONFIG_IEEE80211_DEBUG
+ IEEE80211_DEBUG_SCAN("Adding '%s' (%pM) via %s.\n",
+ escape_essid(network.ssid,
+ network.ssid_len),
+ network.bssid,
+ WLAN_FC_GET_STYPE(beacon->header.frame_ctl) ==
+ IEEE80211_STYPE_PROBE_RESP ?
+ "PROBE RESPONSE" : "BEACON");
+#endif
+
+ memcpy(target, &network, sizeof(*target));
+ list_add_tail(&target->list, &ieee->network_list);
+ } else {
+ IEEE80211_DEBUG_SCAN("Updating '%s' (%pM) via %s.\n",
+ escape_essid(target->ssid,
+ target->ssid_len),
+ target->bssid,
+ WLAN_FC_GET_STYPE(beacon->header.frame_ctl) ==
+ IEEE80211_STYPE_PROBE_RESP ?
+ "PROBE RESPONSE" : "BEACON");
+
+ /* we have an entry and we are going to update it. But this entry may
+ * be already expired. In this case we do the same as we found a new
+ * net and call the new_net handler
+ */
+ renew = !time_after(target->last_scanned + ieee->scan_age, jiffies);
+ //YJ,add,080819,for hidden ap
+ if (is_beacon == 0)
+ network.flags = (~NETWORK_EMPTY_ESSID & network.flags)|(NETWORK_EMPTY_ESSID & target->flags);
+ //if(strncmp(network.ssid, "linksys-c",9) == 0)
+ // printk("====>2 network.ssid=%s FLAG=%d target.ssid=%s FLAG=%d\n", network.ssid, network.flags, target->ssid, target->flags);
+ if (((network.flags & NETWORK_EMPTY_ESSID) == NETWORK_EMPTY_ESSID) \
+ && (((network.ssid_len > 0) && (strncmp(target->ssid, network.ssid, network.ssid_len)))\
+ || ((ieee->current_network.ssid_len == network.ssid_len) && (strncmp(ieee->current_network.ssid, network.ssid, network.ssid_len) == 0) && (ieee->state == IEEE80211_NOLINK))))
+ renew = 1;
+ //YJ,add,080819,for hidden ap,end
+ update_network(target, &network);
+ }
+
+ spin_unlock_irqrestore(&ieee->lock, flags);
+}
+
+void ieee80211_rx_mgt(struct ieee80211_device *ieee,
+ struct ieee80211_hdr_4addr *header,
+ struct ieee80211_rx_stats *stats)
+{
+ switch (WLAN_FC_GET_STYPE(header->frame_ctl)) {
+
+ case IEEE80211_STYPE_BEACON:
+ IEEE80211_DEBUG_MGMT("received BEACON (%d)\n",
+ WLAN_FC_GET_STYPE(header->frame_ctl));
+ IEEE80211_DEBUG_SCAN("Beacon\n");
+ ieee80211_process_probe_response(
+ ieee, (struct ieee80211_probe_response *)header, stats);
+ break;
+
+ case IEEE80211_STYPE_PROBE_RESP:
+ IEEE80211_DEBUG_MGMT("received PROBE RESPONSE (%d)\n",
+ WLAN_FC_GET_STYPE(header->frame_ctl));
+ IEEE80211_DEBUG_SCAN("Probe response\n");
+ ieee80211_process_probe_response(
+ ieee, (struct ieee80211_probe_response *)header, stats);
+ break;
+ }
+}
diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index 104b01fa0fad..803ddfb8d065 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -453,7 +453,7 @@ u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network *pnetwork)
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the connection. */
+ /* If the driver wants to use the bssid to create the connection. */
/* If not, we have to copy the connecting AP's MAC address to it so that */
/* the driver just has the bssid information for PMKIDList searching. */
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 73410ccfb1ec..ebefffd2e96a 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -920,7 +920,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
int i;
struct ieee80211_rxb *rxb = NULL;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.c b/drivers/staging/rtl8712/rtl871x_cmd.c
index d9c1561e3272..5aae4cce8477 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -527,7 +527,7 @@ u8 r8712_joinbss_cmd(struct _adapter *padapter, struct wlan_network *pnetwork)
memcpy(&psecuritypriv->authenticator_ie[1],
&psecnetwork->IEs[12], (256-1));
psecnetwork->IELength = 0;
- /* If the the driver wants to use the bssid to create the connection.
+ /* If the driver wants to use the bssid to create the connection.
* If not, we copy the connecting AP's MAC address to it so that
* the driver just has the bssid information for PMKIDList searching.
*/
diff --git a/drivers/staging/rtl8723au/core/rtw_cmd.c b/drivers/staging/rtl8723au/core/rtw_cmd.c
index 7241a5a8731c..611cd1f6c555 100644
--- a/drivers/staging/rtl8723au/core/rtw_cmd.c
+++ b/drivers/staging/rtl8723au/core/rtw_cmd.c
@@ -518,7 +518,7 @@ int rtw_joinbss_cmd23a(struct rtw_adapter *padapter,
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the
+ /* If the driver wants to use the bssid to create the
* connection. If not, we have to copy the connecting AP's
* MAC address to it so that the driver just has the bssid
* information for PMKIDList searching. */
diff --git a/drivers/staging/unisys/common-spar/include/channels/iochannel.h b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
index 24e11858e0ee..0fce4fd54ce9 100644
--- a/drivers/staging/unisys/common-spar/include/channels/iochannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
@@ -595,7 +595,7 @@ struct uiscmdrsp_scsitaskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
@@ -642,7 +642,7 @@ struct uiscmdrsp_vdiskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
diff --git a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
index 8facb51143ae..9dc629f36cc1 100644
--- a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
@@ -68,11 +68,11 @@ typedef struct _ULTRA_VBUS_HEADERINFO {
u32 devInfoCount; /* num of items in DevInfo member */
/* (this is the allocated size) */
u32 chpInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the ChpInfo struct (below) */
+ /* to the ChpInfo struct (below) */
u32 busInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the BusInfo struct (below) */
+ /* to the BusInfo struct (below) */
u32 devInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the DevInfo array (below) */
+ /* to the DevInfo array (below) */
u8 reserved[104];
} ULTRA_VBUS_HEADERINFO;
diff --git a/drivers/staging/unisys/virtpci/virtpci.c b/drivers/staging/unisys/virtpci/virtpci.c
index d9443a968ddf..97f3d823c688 100644
--- a/drivers/staging/unisys/virtpci/virtpci.c
+++ b/drivers/staging/unisys/virtpci/virtpci.c
@@ -745,7 +745,7 @@ static int virtpci_device_resume(struct device *dev)
/* For a child device just created on a client bus, fill in
* information about the driver that is controlling this device into
- * the the appropriate slot within the vbus channel of the bus
+ * the appropriate slot within the vbus channel of the bus
* instance.
*/
static void fix_vbus_devInfo(struct device *dev, int devNo, int devType,
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index fbc5ebb5f761..d06dd9316716 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -410,8 +410,8 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
} else {
/*
- * Extract the RELATIVE TARGET PORT IDENTIFIER to identify
- * the Target Port in question for the the incoming
+ * Extact the RELATIVE TARGET PORT IDENTIFIER to identify
+ * the Target Port in question for the incoming
* SET_TARGET_PORT_GROUPS op.
*/
rtpi = get_unaligned_be16(ptr + 2);
diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h
index ba87d6e731dd..1a4ba247f160 100644
--- a/drivers/thunderbolt/ctl.h
+++ b/drivers/thunderbolt/ctl.h
@@ -44,7 +44,7 @@ struct tb_cfg_result {
* If err = 1 then this is the port that send the
* error.
* If err = 0 and if this was a cfg_read/write then
- * this is the the upstream port of the responding
+ * this is the upstream port of the responding
* switch.
* Otherwise the field is set to zero.
*/
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 6234c75da33f..50294f31f227 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -313,8 +313,7 @@ static const int hrsl_to_error[] = {
/*
* See http://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a
- * reasonable overview of how control transfers use the the IN/OUT
- * tokens.
+ * reasonable overview of how control transfers use the IN/OUT tokens.
*/
#define MAX3421_HXFR_BULK_IN(ep) (0x00 | (ep)) /* bulk or interrupt */
#define MAX3421_HXFR_SETUP 0x10
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index abed30b82905..54674c03d22b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1652,7 +1652,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
- * RExit to a disconnect state). If so, let the the driver know it's
+ * RExit to a disconnect state). If so, let the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED(temp) &&
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 01bf53392819..1b99a08ca2de 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -261,7 +261,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
* Cypress app note that describes this mechanism
- * states the the low-speed part can't handle more
+ * states that the low-speed part can't handle more
* than 800 bytes/sec, in which case 4800 baud is the
* safest speed for a part like that.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index dfd728a263d2..71636a617d89 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -429,7 +429,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
}
/*
- * This is the the common top part of all parallel port callback operations that
+ * This is the common top part of all parallel port callback operations that
* send synchronous messages to the device. This implements convoluted locking
* that avoids two scenarios: (1) a port operation is called after usbserial
* has called our release function, at which point struct mos7715_parport has
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 0677139c6065..d435940d5598 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -46,7 +46,7 @@
*
* ASSUMPTIONS:
*
- * - We use the the as device address the port number where it is
+ * - We use as device address the port number where it is
* connected (port 0 doesn't exist). For unauth, it is 128 + that.
*
* ROADMAP:
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
index b7d4f6b75eef..caa4cb40334d 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/uwb/drp-ie.c
@@ -262,7 +262,7 @@ int uwb_drp_ie_update(struct uwb_rsv *rsv)
* We are given a zone id and the MAS bitmap of bits that need to be set in
* this zone. Note that this zone may already have bits set and this only
* adds settings - we cannot simply assign the MAS bitmap contents to the
- * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * zone contents. We iterate over the bits (MAS) in the zone and set the
* bits that are set in the given MAS bitmap.
*/
static
diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
index d4e7684e7045..501bc08dc125 100644
--- a/drivers/video/fbdev/omap/sossi.c
+++ b/drivers/video/fbdev/omap/sossi.c
@@ -370,7 +370,7 @@ static void sossi_set_bits_per_cycle(int bpc)
int bus_pick_count, bus_pick_width;
/*
- * We set explicitly the the bus_pick_count as well, although
+ * We set explicitly the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
diff --git a/drivers/video/fbdev/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c
index ceb434c95c0d..9177b8056356 100644
--- a/drivers/video/fbdev/sis/sis_accel.c
+++ b/drivers/video/fbdev/sis/sis_accel.c
@@ -215,7 +215,7 @@ SiS310SubsequentScreenToScreenCopy(struct sis_video_info *ivideo, int src_x, int
* and destination blitting areas overlap and
* adapt the bitmap addresses synchronously
* if the coordinates exceed the valid range.
- * The the areas do not overlap, we do our
+ * If the areas do not overlap, we do our
* normal check.
*/
if((mymax - mymin) < height) {
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 5b570b6efa28..ecbd6b7b6c9a 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -507,7 +507,7 @@ static int autofs_dev_ioctl_askumount(struct file *fp,
* located path is the root of a mount we return 1 along with
* the super magic of the mount or 0 otherwise.
*
- * In both cases the the device number (as returned by
+ * In both cases the device number (as returned by
* new_encode_dev()) is also returned.
*/
static int autofs_dev_ioctl_ismountpoint(struct file *fp,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index eea26e1b2fda..8ae32564e6d7 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -849,7 +849,7 @@ int btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace)
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
- * not called and the the filesystem is remounted
+ * not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancelation is wanted.
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index 6528aa662181..6c5ce8e50f32 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -3402,7 +3402,7 @@ verbose_printk("btrfs: process_recorded_refs %llu\n", sctx->cur_ino);
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
- * the the current inum. To handle this case, we create the
+ * than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 1d1ba083ca6e..3d5b414003b3 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2654,7 +2654,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
mutex_unlock(&log_root_tree->log_mutex);
/*
- * nobody else is going to jump in and write the the ctree
+ * nobody else is going to jump in and write the ctree
* super here because the log_commit atomic below is protecting
* us. We must be called with a transaction handle pinning
* the running transaction open, so a full commit can't hop
diff --git a/fs/dcache.c b/fs/dcache.c
index cb25a1a5e307..4a327e47b6b0 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1885,8 +1885,8 @@ EXPORT_SYMBOL(d_obtain_root);
* same inode, only the actual correct case is stored in the dcache for
* case-insensitive filesystems.
*
- * For a case-insensitive lookup match and if the the case-exact dentry
- * already exists in in the dcache, use it and return it.
+ * For a case-insensitive lookup match and if the case-exact dentry
+ * already exists in the dcache, use it and return it.
*
* If no entry exists with the exact case name, allocate new dentry with
* the exact case, and return the spliced entry.
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 4725a07f003c..bcdfbc7568d7 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -900,7 +900,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack {
* @filename: This function kmalloc's the memory for the filename
* @filename_size: This function sets this to the amount of memory
* kmalloc'd for the filename
- * @packet_size: This function sets this to the the number of octets
+ * @packet_size: This function sets this to the number of octets
* in the packet parsed
* @mount_crypt_stat: The mount-wide cryptographic context
* @data: The memory location containing the start of the tag 70
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index d9a17d0b124d..c9c6f2e5a0a0 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -51,7 +51,7 @@ struct ext2_block_alloc_info {
/*
* Was i_next_alloc_goal in ext2_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it is the physical block number of the block which was most-recently
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index bea662bd0ca6..3b94971b7b9b 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -271,7 +271,7 @@ static int ext4_create_inline_data(handle_t *handle,
len = 0;
}
- /* Insert the the xttr entry. */
+ /* Insert the xttr entry. */
i.value = value;
i.value_len = len;
@@ -829,7 +829,7 @@ out:
/*
* Prepare the write for the inline data.
- * If the the data can be written into the inode, we just read
+ * If the data can be written into the inode, we just read
* the page and make it uptodate, and start the journal.
* Otherwise read the page, makes it dirty so that it can be
* handle in writepages(the i_disksize update is left to the
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index ff483257283b..5b3f3135fb0a 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -150,7 +150,7 @@ struct seg_entry {
unsigned short valid_blocks; /* # of valid blocks */
unsigned char *cur_valid_map; /* validity bitmap of blocks */
/*
- * # of valid blocks and the validity bitmap stored in the the last
+ * # of valid blocks and the validity bitmap stored in the last
* checkpoint pack. This information is used by the SSR mode.
*/
unsigned short ckpt_valid_blocks;
diff --git a/fs/kernfs/file.c b/fs/kernfs/file.c
index 4429d6d9217f..2d4e4ef09b73 100644
--- a/fs/kernfs/file.c
+++ b/fs/kernfs/file.c
@@ -259,7 +259,7 @@ static ssize_t kernfs_fop_read(struct file *file, char __user *user_buf,
* There is no easy way for us to know if userspace is only doing a partial
* write, so we don't support them. We expect the entire buffer to come on
* the first write. Hint: if you're writing a value, first read the file,
- * modify only the the value you're changing, then write entire buffer
+ * modify only the value you're changing, then write entire buffer
* back.
*/
static ssize_t kernfs_fop_write(struct file *file, const char __user *user_buf,
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 044013455621..c0aa12bdb106 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -690,7 +690,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb,
/*
* Under certain conditions, the window slide code
* might have reduced the number of bits available or
- * disabled the the local alloc entirely. Re-check
+ * disabled the local alloc entirely. Re-check
* here and return -ENOSPC if necessary.
*/
status = -ENOSPC;
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index 5a6bd5d8779a..85438d16e633 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -71,7 +71,7 @@ xfs_fs_encode_fh(
fileid_type = FILEID_INO32_GEN_PARENT;
/*
- * If the the filesystem may contain 64bit inode numbers, we need
+ * If the filesystem may contain 64bit inode numbers, we need
* to use larger file handles that can represent them.
*
* While we only allocate inodes that do not fit into 32 bits any
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index 26bb55e9e8b6..37cdb83e1e24 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -120,7 +120,7 @@ static inline int drm_rect_height(const struct drm_rect *r)
}
/**
- * drm_rect_visible - determine if the the rectangle is visible
+ * drm_rect_visible - determine if the rectangle is visible
* @r: rectangle whose visibility is returned
*
* RETURNS:
diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h
index d5b5f76d57ef..91c32b80c6d1 100644
--- a/include/linux/mic_bus.h
+++ b/include/linux/mic_bus.h
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ include/linux/virtio.h.
*/
#ifndef _MIC_BUS_H_
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 8981cc882ed2..0b3da6784a66 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -196,7 +196,7 @@ extern pgprot_t protection_map[16];
#define FAULT_FLAG_USER 0x80 /* The fault originated in userspace */
/*
- * vm_fault is filled by the the pagefault handler and passed to the vma's
+ * vm_fault is filled by the pagefault handler and passed to the vma's
* ->fault function. The vma's ->fault is responsible for returning a bitmask
* of VM_FAULT_xxx flags that give details about how the fault was handled.
*
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 494f99e852da..f9f20ca81f51 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -94,7 +94,7 @@ struct kparam_array
* ".") the kernel commandline parameter. Note that - is changed to _, so
* the user can use "foo-bar=1" even for variable "foo_bar".
*
- * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * @perm is 0 if the variable is not to appear in sysfs, or 0444
* for world-readable, 0644 for root-writable, etc. Note that if it
* is writable, you may need to use kparam_block_sysfs_write() around
* accesses (esp. charp, which can be kfreed when it changes).
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index abde271c18ae..51301dc8c0c5 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2697,7 +2697,7 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
* must call this function to return the skb back to the stack, with
* or without a timestamp.
*
- * @skb: clone of the the original outgoing packet
+ * @skb: clone of the original outgoing packet
* @hwtstamps: hardware time stamps, may be NULL if not available
*
*/
diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h
index 94e5ed64dc6d..e9a8d524ab06 100644
--- a/include/net/caif/caif_layer.h
+++ b/include/net/caif/caif_layer.h
@@ -184,7 +184,7 @@ struct cflayer {
* CAIF packet downwards in the stack.
* Packet handling rules:
* - The CAIF packet (cfpkt) ownership is passed to the
- * transmit function. This means that the the packet
+ * transmit function. This means that the packet
* cannot be accessed after passing it to the below
* layer using dn->transmit().
*
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 9bcb220bd4ad..f422729b30c3 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -100,7 +100,7 @@ struct rt6_info {
struct in6_addr rt6i_gateway;
/* Multipath routes:
- * siblings is a list of rt6_info that have the the same metric/weight,
+ * siblings is a list of rt6_info that have the same metric/weight,
* destination, but not the same gateway. nsiblings is just a cache
* to speed up lookup.
*/
diff --git a/include/net/wimax.h b/include/net/wimax.h
index c52b68577cb0..c9705a3eb3b7 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -43,7 +43,7 @@
*
* USAGE
*
- * Embed a `struct wimax_dev` at the beginning of the the device's
+ * Embed a `struct wimax_dev` at the beginning of the device's
* private structure, initialize and register it. For details, see
* `struct wimax_dev`s documentation.
*
diff --git a/include/uapi/asm-generic/fcntl.h b/include/uapi/asm-generic/fcntl.h
index 7543b3e51331..3c8f396825b8 100644
--- a/include/uapi/asm-generic/fcntl.h
+++ b/include/uapi/asm-generic/fcntl.h
@@ -142,7 +142,7 @@
* record locks, but are "owned" by the open file description, not the
* process. This means that they are inherited across fork() like BSD (flock)
* locks, and they are only released automatically when the last reference to
- * the the open file against which they were acquired is put.
+ * the open file against which they were acquired is put.
*/
#define F_OFD_GETLK 36
#define F_OFD_SETLK 37
diff --git a/init/Kconfig b/init/Kconfig
index e84c6423a2e5..19e94edc0ac8 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -848,8 +848,8 @@ config LOG_CPU_MAX_BUF_SHIFT
used as it forces an exact (power of two) size of the ring buffer.
The number of possible CPUs is used for this computation ignoring
- hotplugging making the compuation optimal for the the worst case
- scenerio while allowing a simple algorithm to be used from bootup.
+ hotplugging making the computation optimal for the worst case
+ scenario while allowing a simple algorithm to be used from bootup.
Examples shift values and their meaning:
17 => 128 KB for each CPU
diff --git a/init/main.c b/init/main.c
index bb1aed928f21..ceb26e85e416 100644
--- a/init/main.c
+++ b/init/main.c
@@ -512,7 +512,7 @@ asmlinkage __visible void __init start_kernel(void)
debug_objects_early_init();
/*
- * Set up the the initial canary ASAP:
+ * Set up the initial canary ASAP:
*/
boot_init_stack_canary();
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 9019f15deab2..6e82ca9e2735 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -17,7 +17,7 @@
#ifdef HAVE_JUMP_LABEL
-/* mutex to protect coming/going of the the jump_label table */
+/* mutex to protect coming/going of the jump_label table */
static DEFINE_MUTEX(jump_label_mutex);
void jump_label_lock(void)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 1ce770687ea8..8cd9ce2a6bcc 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2878,7 +2878,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
- * with as many of the the *youngest* kmsg records that fit into it.
+ * with as many of the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
diff --git a/kernel/smp.c b/kernel/smp.c
index aff8aa14f547..c6174667d632 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -622,7 +622,7 @@ EXPORT_SYMBOL(on_each_cpu_mask);
* for all the required CPUs to finish. This may include the local
* processor.
* @cond_func: A callback function that is passed a cpu id and
- * the the info parameter. The function is called
+ * the info parameter. The function is called
* with preemption disabled. The function should
* return a blooean value indicating whether to IPI
* the specified CPU.
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index b38fb2b9e237..612b68cd4599 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2881,7 +2881,7 @@ rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
* This function lets the user discard an event in the ring buffer
* and then that event will not be read later.
*
- * This function only works if it is called before the the item has been
+ * This function only works if it is called before the item has been
* committed. It will try to free the event from the ring buffer
* if another event has not been added behind it.
*
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 1e031f2c9aba..6a76a7f29c3f 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -884,7 +884,7 @@ EXPORT_SYMBOL(bitmap_bitremap);
* read it, you're overqualified for your current job.)
*
* In other words, @orig is mapped onto (surjectively) @dst,
- * using the the map { <n, m> | the n-th bit of @relmap is the
+ * using the map { <n, m> | the n-th bit of @relmap is the
* m-th set bit of @relmap }.
*
* Any set bits in @orig above bit number W, where W is the
diff --git a/lib/dynamic_queue_limits.c b/lib/dynamic_queue_limits.c
index 0777c5a45fa0..2ad6fc394f07 100644
--- a/lib/dynamic_queue_limits.c
+++ b/lib/dynamic_queue_limits.c
@@ -60,7 +60,7 @@ void dql_completed(struct dql *dql, unsigned int count)
* the whole interval (the check above).
*
* If there is slack, the amount of execess data queued above
- * the the amount needed to prevent starvation, the queue limit
+ * the amount needed to prevent starvation, the queue limit
* can be decreased. To avoid hysteresis we consider the
* minimum amount of slack found over several iterations of the
* completion routine.
diff --git a/lib/earlycpio.c b/lib/earlycpio.c
index 3eb3e4722b8e..9d4da0a6a6ed 100644
--- a/lib/earlycpio.c
+++ b/lib/earlycpio.c
@@ -50,7 +50,7 @@ enum cpio_fields {
/**
* cpio_data find_cpio_data - Search for files in an uncompressed cpio
* @path: The directory to search for, including a slash at the end
- * @data: Pointer to the the cpio archive or a header inside
+ * @data: Pointer to the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @nextoff: When a matching file is found, this is the offset from the
* beginning of the cpio to the beginning of the next file, not the
diff --git a/lib/syscall.c b/lib/syscall.c
index e30e03932480..624d80430969 100644
--- a/lib/syscall.c
+++ b/lib/syscall.c
@@ -31,7 +31,7 @@ static int collect_syscall(struct task_struct *target, long *callno,
* @pc: filled with user PC
*
* If @target is blocked in a system call, returns zero with *@callno
- * set to the the call's number and @args filled in with its arguments.
+ * set to the call's number and @args filled in with its arguments.
* Registers not used for system call arguments may not be available and
* it is not kosher to use &struct user_regset calls while the system
* call is still in progress. Note we may get this result if @target
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index eeceeeb09019..fdd76586e1a4 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1308,7 +1308,7 @@ static void return_unused_surplus_pages(struct hstate *h,
* evenly across all nodes with memory. Iterate across these nodes
* until we can no longer free unreserved surplus pages. This occurs
* when the nodes with surplus pages have no free pages.
- * free_pool_huge_page() will balance the the freed pages across the
+ * free_pool_huge_page() will balance the freed pages across the
* on-line nodes with memory and will handle the hstate accounting.
*/
while (nr_pages--) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 18cee0d4c8a2..c9c9b33608f3 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4222,7 +4222,7 @@ static int zone_batchsize(struct zone *zone)
* locking.
*
* Any new users of pcp->batch and pcp->high should ensure they can cope with
- * those fields changing asynchronously (acording the the above rule).
+ * those fields changing asynchronously (according to the above rule).
*
* mutex_is_locked(&pcp_batch_high_lock) required when calling this function
* outside of boot time (or some other assurance that no concurrent updaters
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index faff6247ac8f..9f4c71ba8dd1 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -966,7 +966,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
return 0;
}
-/* Encrypt the the link */
+/* Encrypt the link */
static void hci_conn_encrypt(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 1d9c29a00568..5b2b17522561 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1674,7 +1674,7 @@ static void hci_init3_req(struct hci_request *req, unsigned long opt)
* Delete Stored Link Key command. They are clearly indicating its
* absence in the bit mask of supported commands.
*
- * Check the supported commands and only if the the command is marked
+ * Check the supported commands and only if the command is marked
* as supported send it. If not supported assume that the controller
* does not have actual support for stored link keys which makes this
* command redundant anyway.
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index a88b8524846e..9d83a2e05baf 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1349,7 +1349,7 @@ static void sctp_select_active_and_retran_path(struct sctp_association *asoc)
}
/* We did not find anything useful for a possible retransmission
- * path; either primary path that we found is the the same as
+ * path; either primary path that we found is the same as
* the current one, or we didn't generally find an active one.
*/
if (trans_sec == NULL)
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index 158701da2d31..c13e0636ea44 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -199,8 +199,8 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3;
max = asoc->frag_point;
- /* If the the peer requested that we authenticate DATA chunks
- * we need to account for bundling of the AUTH chunks along with
+ /* If the peer requested that we authenticate DATA chunks
+ * we need to accound for bundling of the AUTH chunks along with
* DATA.
*/
if (sctp_auth_send_cid(SCTP_CID_DATA, asoc)) {
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 6f6b829c9e8e..1ef370a9f675 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -190,7 +190,7 @@ void rpc_destroy_generic_auth(void)
}
/*
- * Test the the current time (now) against the underlying credential key expiry
+ * Test the current time (now) against the underlying credential key expiry
* minus a timeout and setup notification.
*
* The normal case:
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 403078d670a9..b21863009913 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
* @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
* %WIMAX_RF_OFF radio off.
*
- * Reports changes in the software RF switch state to the the WiMAX
+ * Reports changes in the software RF switch state to the WiMAX
* stack.
*
* The main use is during initialization, so the driver can query the
diff --git a/scripts/coccinelle/misc/badty.cocci b/scripts/coccinelle/misc/badty.cocci
index 2fc06fc71927..7bde383f577b 100644
--- a/scripts/coccinelle/misc/badty.cocci
+++ b/scripts/coccinelle/misc/badty.cocci
@@ -3,7 +3,7 @@
//# This makes an effort to find cases where the argument to sizeof is wrong
//# in memory allocation functions by checking the type of the allocated memory
//# when it is a double pointer and ensuring the sizeof argument takes a pointer
-//# to the the memory being allocated. There are false positives in cases the
+//# to the memory being allocated. There are false positives in cases the
//# sizeof argument is not used in constructing the return value. The result
//# may need some reformatting.
//
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index db40fa04cd51..9eb8c74b69a1 100644
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in
kernel/trace/trace_functions.c
The resulted trace is processed into a tree to produce a more human
view of the call stack by drawing textual but hierarchical tree of
-calls. Only the functions's names and the the call time are provided.
+calls. Only the functions's names and the call time are provided.
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
index 3064c6ced87c..7b9769e7985a 100644
--- a/security/apparmor/context.c
+++ b/security/apparmor/context.c
@@ -13,7 +13,7 @@
* License.
*
*
- * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * AppArmor sets confinement on every task, via the aa_task_cxt and
* the aa_task_cxt.profile, both of which are required and are not allowed
* to be NULL. The aa_task_cxt is not reference counted and is unique
* to each cred (which is reference count). The profile pointed to by
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index e26f860e5f2e..112d40974504 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -474,7 +474,7 @@ error:
* keyring, otherwise replace the link to the matching key with a link to the
* new key.
*
- * The key must grant the caller Link permission and the the keyring must grant
+ * The key must grant the caller Link permission and the keyring must grant
* the caller Write permission. Furthermore, if an additional link is created,
* the keyring's quota will be extended.
*
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index ec6a7d0d1886..e3ecc7538f8e 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -5110,7 +5110,7 @@ EXPORT_SYMBOL_GPL(snd_hda_power_save);
* @nid: NID to check / update
*
* Check whether the given NID is in the amp list. If it's in the list,
- * check the current AMP status, and update the the power-status according
+ * check the current AMP status, and update the power-status according
* to the mute status.
*
* This function is supposed to be set or called from the check_power_status
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 98cd1908c039..f193b73de0f2 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -887,7 +887,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec,
static struct snd_kcontrol_new beep_vol_ctl =
HDA_CODEC_VOLUME(NULL, 0, 0, 0);
- /* check for mute support for the the amp */
+ /* check for mute support for the amp */
if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
const struct snd_kcontrol_new *temp;
if (spec->anabeep_nid == nid)
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index f3b491aa3e22..df5cb3b4b6e2 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -31,7 +31,7 @@
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
- * sampling rate. That means the the FPGA doubles the
+ * sampling rate. That means that the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index bddee30a4bc7..eaac777ee91d 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -694,7 +694,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int source)
u64 Kpart;
unsigned int K, Ndiv, Nmod, target;
- /* The the PLL output is always 98.304MHz. */
+ /* The PLL output is always 98.304MHz. */
target = 98304000;
/* If the input frequency is over 14.4MHz then scale it down. */
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index a609aafc994d..3c1c7b71e69b 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -164,7 +164,7 @@ static void fsl_dma_abort_stream(struct snd_pcm_substream *substream)
/**
* fsl_dma_update_pointers - update LD pointers to point to the next period
*
- * As each period is completed, this function changes the the link
+ * As each period is completed, this function changes the link
* descriptor pointers for that period to point to the next period.
*/
static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private)
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index b2c3d0d5dca3..8dc8cc9b8348 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -615,7 +615,7 @@ A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. The DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index b3b8abae62b8..6acad619044b 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -196,7 +196,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
- period being the hist entry period value
- - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option
+ - WEIGHT-A/WEIGHT-B being user suplied weights in the '-c' option
behind ':' separator like '-c wdiff:1,2'.
- WIEGHT-A being the weight of the data file
- WIEGHT-B being the weight of the baseline data file
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index 56bfb523c5bb..6940d8849434 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -35,9 +35,9 @@ The \fB-c MSR#\fP option includes the delta of the specified 32-bit MSR counter.
.PP
The \fB-C MSR#\fP option includes the delta of the specified 64-bit MSR counter.
.PP
-The \fB-m MSR#\fP option includes the the specified 32-bit MSR value.
+The \fB-m MSR#\fP option includes the specified 32-bit MSR value.
.PP
-The \fB-M MSR#\fP option includes the the specified 64-bit MSR value.
+The \fB-M MSR#\fP option includes the specified 64-bit MSR value.
.PP
The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
The default is 5 seconds.
diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
index fd7e9e9d6f4a..1aa7faa0e0e0 100644
--- a/tools/thermal/tmon/pid.c
+++ b/tools/thermal/tmon/pid.c
@@ -38,7 +38,7 @@
/**************************************************************************
* PID (Proportional-Integral-Derivative) controller is commonly used in
- * linear control system, consider the the process.
+ * linear control system, consider the process.
* G(s) = U(s)/E(s)
* kp = proportional gain
* ki = integral gain
--
1.9.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-01 9:53 ` Michael Opdenacker
@ 2014-10-01 13:32 ` Joe Perches
2014-10-01 19:49 ` Michael Opdenacker
0 siblings, 1 reply; 35+ messages in thread
From: Joe Perches @ 2014-10-01 13:32 UTC (permalink / raw)
To: Michael Opdenacker; +Cc: trivial, akpm, arend, linux-kernel, gregkh
On Wed, 2014-10-01 at 11:53 +0200, Michael Opdenacker wrote:
> Fix all occurrences of "the the " in the source code,
> comments and documentation.
[]
> drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c | 1486 ++++++++++++++++++++
That one snuck in here where it doesn't belong.
Please fix and resubmit?
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-01 13:32 ` Joe Perches
@ 2014-10-01 19:49 ` Michael Opdenacker
2014-10-01 19:54 ` Michael Opdenacker
0 siblings, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2014-10-01 19:49 UTC (permalink / raw)
To: Joe Perches; +Cc: trivial, akpm, arend, linux-kernel, gregkh
Hi Joe,
Thank you very much for your review!
On 10/01/2014 03:32 PM, Joe Perches wrote:
> On Wed, 2014-10-01 at 11:53 +0200, Michael Opdenacker wrote:
>> Fix all occurrences of "the the " in the source code,
>> comments and documentation.
> []
>> drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c | 1486 ++++++++++++++++++++
> That one snuck in here where it doesn't belong.
Oops, right. I will review the line stats before submitting next time...
>
> Please fix and resubmit?
Sure, the update is on its way!
Thanks again,
Cheers,
Michael.
--
Michael Opdenacker, CEO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
+33 484 258 098
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-01 19:49 ` Michael Opdenacker
@ 2014-10-01 19:54 ` Michael Opdenacker
2014-10-02 17:25 ` Randy Dunlap
0 siblings, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2014-10-01 19:54 UTC (permalink / raw)
To: trivial, joe, akpm, arend, gregkh; +Cc: linux-kernel, Michael Opdenacker
Fix all occurrences of "the the " in the source code,
comments and documentation.
The replacement couldn't be automated because sometimes
the first "the" was meant to be another word.
Example: "according the the"
meaning: "according to the"
Note that I sometimes took the opportunity to fix
other spelling issues or typos in the same sentences.
I also fixed a few checkpatch errors in the same
lines, but not all of them (should be addressed by
separate patches).
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
---
Documentation/ABI/testing/sysfs-devices-memory | 2 +-
Documentation/DocBook/media/v4l/controls.xml | 2 +-
Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
Documentation/devicetree/bindings/arm/msm/timer.txt | 2 +-
Documentation/devicetree/bindings/ata/cavium-compact-flash.txt | 2 +-
Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt | 2 +-
Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt | 2 +-
Documentation/devicetree/bindings/mtd/fsmc-nand.txt | 2 +-
Documentation/devicetree/bindings/net/broadcom-systemport.txt | 2 +-
Documentation/filesystems/autofs4-mount-control.txt | 4 ++--
Documentation/phy.txt | 2 +-
Documentation/vm/unevictable-lru.txt | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/unwind.h | 2 +-
arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
arch/arm/mach-pxa/stargate2.c | 2 +-
arch/arm64/crypto/aes-neon.S | 2 +-
arch/blackfin/mach-common/entry.S | 2 +-
arch/c6x/platforms/cache.c | 2 +-
arch/ia64/include/asm/spinlock.h | 2 +-
arch/ia64/include/asm/uv/uv_hub.h | 2 +-
arch/m68k/platform/coldfire/intc-2.c | 2 +-
arch/metag/kernel/process.c | 2 +-
arch/microblaze/kernel/entry.S | 2 +-
arch/mips/alchemy/devboards/pm.c | 2 +-
arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
arch/mips/include/asm/spinlock.h | 2 +-
arch/mips/kvm/mips.c | 2 +-
arch/mips/mm/c-octeon.c | 4 ++--
arch/mips/netlogic/xlr/fmn.c | 2 +-
arch/powerpc/include/asm/cache.h | 2 +-
arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
arch/powerpc/kernel/head_64.S | 2 +-
arch/powerpc/mm/gup.c | 2 +-
arch/powerpc/mm/hugetlbpage.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/platforms/chrp/setup.c | 2 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
arch/s390/kernel/perf_cpum_sf.c | 2 +-
arch/s390/mm/gup.c | 2 +-
arch/sparc/kernel/pci.c | 2 +-
arch/sparc/mm/gup.c | 2 +-
arch/tile/include/asm/irqflags.h | 2 +-
arch/tile/include/gxio/trio.h | 2 +-
arch/tile/kernel/single_step.c | 2 +-
arch/x86/include/asm/spinlock.h | 2 +-
arch/x86/include/asm/uv/uv_hub.h | 2 +-
arch/x86/kvm/x86.c | 2 +-
arch/x86/mm/gup.c | 4 ++--
arch/x86/xen/setup.c | 2 +-
arch/xtensa/include/asm/initialize_mmu.h | 2 +-
arch/xtensa/kernel/entry.S | 4 ++--
crypto/asymmetric_keys/pkcs7_parser.h | 2 +-
drivers/acpi/acpica/accommon.h | 2 +-
drivers/acpi/acpica/tbfadt.c | 2 +-
drivers/char/apm-emulation.c | 2 +-
drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
drivers/cpuidle/driver.c | 2 +-
drivers/crypto/picoxcell_crypto.c | 2 +-
drivers/crypto/ux500/hash/hash_core.c | 2 +-
drivers/gpio/gpio-ich.c | 2 +-
drivers/gpio/gpio-sch.c | 4 ++--
drivers/gpu/drm/drm_mm.c | 4 ++--
drivers/gpu/drm/i915/i915_gem.c | 2 +-
drivers/gpu/drm/i915/i915_gem_userptr.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 4 ++--
drivers/gpu/drm/radeon/atombios.h | 4 ++--
drivers/gpu/drm/radeon/r300_reg.h | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 2 +-
drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
drivers/gpu/drm/radeon/radeon_vm.c | 4 ++--
drivers/hv/channel.c | 4 ++--
drivers/hv/vmbus_drv.c | 4 ++--
drivers/hwmon/pmbus/ucd9200.c | 2 +-
drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
drivers/infiniband/hw/qib/qib.h | 2 +-
drivers/input/mouse/gpio_mouse.c | 2 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
drivers/lguest/core.c | 2 +-
drivers/media/dvb-frontends/tda1002x.h | 2 +-
drivers/media/dvb-frontends/tda10048.c | 2 +-
drivers/media/pci/cx88/cx88-dsp.c | 2 +-
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/saa7164/saa7164-core.c | 2 +-
drivers/media/platform/davinci/vpbe.c | 2 +-
drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
drivers/media/usb/dvb-usb/friio.c | 2 +-
drivers/media/usb/dvb-usb/friio.h | 2 +-
drivers/media/usb/gspca/finepix.c | 2 +-
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 2 +-
drivers/memory/emif.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/mfd/db8500-prcmu.c | 2 +-
drivers/misc/mic/bus/mic_bus.c | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/ubi/ubi.h | 4 ++--
drivers/mtd/ubi/wl.c | 2 +-
drivers/net/can/xilinx_can.c | 2 +-
drivers/net/ethernet/calxeda/xgmac.c | 2 +-
drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
drivers/net/wimax/i2400m/i2400m.h | 4 ++--
drivers/net/wimax/i2400m/rx.c | 2 +-
drivers/net/wimax/i2400m/tx.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/wcn36xx/hal.h | 6 +++---
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++--
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 ++--
drivers/net/wireless/mwifiex/debugfs.c | 2 +-
drivers/net/wireless/rsi/rsi_91x_sdio.c | 4 ++--
drivers/net/wireless/ti/wl1251/acx.h | 2 +-
drivers/of/base.c | 2 +-
drivers/pci/hotplug/acpiphp_glue.c | 2 +-
drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 2 +-
drivers/pinctrl/pinctrl-at91.c | 2 +-
drivers/power/power_supply_sysfs.c | 5 +++--
drivers/rtc/rtc-rs5c372.c | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 6 +++---
drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++--
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/remote_device.h | 2 +-
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/spi/spi-ppc4xx.c | 2 +-
drivers/staging/android/ion/ion.c | 2 +-
drivers/staging/android/uapi/binder.h | 2 +-
drivers/staging/et131x/et131x.c | 2 +-
drivers/staging/lustre/lustre/llite/file.c | 2 +-
drivers/staging/lustre/lustre/ptlrpc/pinger.c | 2 +-
drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/rtl8712/rtl871x_cmd.c | 2 +-
drivers/staging/rtl8723au/core/rtw_cmd.c | 2 +-
drivers/staging/unisys/common-spar/include/channels/iochannel.h | 4 ++--
drivers/staging/unisys/common-spar/include/channels/vbuschannel.h | 6 +++---
drivers/staging/unisys/virtpci/virtpci.c | 2 +-
drivers/target/target_core_alua.c | 4 ++--
drivers/thunderbolt/ctl.h | 2 +-
drivers/usb/host/max3421-hcd.c | 3 +--
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/mos7720.c | 2 +-
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/uwb/drp-ie.c | 2 +-
drivers/video/fbdev/omap/sossi.c | 2 +-
drivers/video/fbdev/sis/sis_accel.c | 2 +-
fs/autofs4/dev-ioctl.c | 2 +-
fs/btrfs/dev-replace.c | 2 +-
fs/btrfs/send.c | 2 +-
fs/btrfs/tree-log.c | 2 +-
fs/dcache.c | 4 ++--
fs/ecryptfs/keystore.c | 2 +-
fs/ext2/ext2.h | 2 +-
fs/ext4/inline.c | 4 ++--
fs/f2fs/segment.h | 2 +-
fs/kernfs/file.c | 2 +-
fs/ocfs2/localalloc.c | 2 +-
fs/xfs/xfs_export.c | 2 +-
include/drm/drm_rect.h | 2 +-
include/linux/mic_bus.h | 2 +-
include/linux/mm.h | 2 +-
include/linux/moduleparam.h | 2 +-
include/linux/skbuff.h | 2 +-
include/net/caif/caif_layer.h | 2 +-
include/net/ip6_fib.h | 2 +-
include/net/wimax.h | 2 +-
include/uapi/asm-generic/fcntl.h | 2 +-
init/Kconfig | 4 ++--
init/main.c | 2 +-
kernel/jump_label.c | 2 +-
kernel/printk/printk.c | 2 +-
kernel/smp.c | 2 +-
kernel/trace/ring_buffer.c | 2 +-
lib/bitmap.c | 2 +-
lib/dynamic_queue_limits.c | 2 +-
lib/earlycpio.c | 2 +-
lib/syscall.c | 2 +-
mm/hugetlb.c | 2 +-
mm/page_alloc.c | 2 +-
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/hci_core.c | 2 +-
net/sctp/associola.c | 2 +-
net/sctp/chunk.c | 4 ++--
net/sunrpc/auth_generic.c | 2 +-
net/wimax/op-rfkill.c | 2 +-
scripts/coccinelle/misc/badty.cocci | 2 +-
scripts/tracing/draw_functrace.py | 2 +-
security/apparmor/context.c | 2 +-
security/keys/keyctl.c | 2 +-
sound/pci/hda/hda_codec.c | 2 +-
sound/pci/hda/patch_sigmatel.c | 2 +-
sound/pci/ice1712/prodigy192.c | 2 +-
sound/soc/codecs/wm9713.c | 2 +-
sound/soc/fsl/fsl_dma.c | 2 +-
sound/sparc/dbri.c | 2 +-
tools/perf/Documentation/perf-diff.txt | 2 +-
tools/power/x86/turbostat/turbostat.8 | 4 ++--
tools/thermal/tmon/pid.c | 2 +-
225 files changed, 263 insertions(+), 263 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index 7405de26ee60..4b3c0208d0a5 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -45,7 +45,7 @@ Description:
The file /sys/devices/system/memory/memoryX/state
is read-write. When read, its contents show the
online/offline state of the memory section. When written,
- root can toggle the the online/offline state of a removable
+ root can toggle the online/offline state of a removable
memory section (see removable file description above)
using the following commands.
# echo online > /sys/devices/system/memory/memoryX/state
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 9f5ffd85560b..a232065a7c6a 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3415,7 +3415,7 @@ giving priority to the center of the metered area.</entry>
<row>
<entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant> </entry>
<entry>A multi-zone metering. The light intensity is measured
-in several points of the frame and the the results are combined. The
+in several points of the frame and the results are combined. The
algorithm of the zones selection and their significance in calculating the
final value is device dependent.</entry>
</row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
index f4e28e7d4751..721728745407 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
@@ -267,7 +267,7 @@ is intended for still imaging applications. The idea is to get the
best possible image quality that the hardware can deliver. It is not
defined how the driver writer may achieve that; it will depend on the
hardware and the ingenuity of the driver writer. High quality mode is
-a different mode from the the regular motion video capture modes. In
+a different mode from the regular motion video capture modes. In
high quality mode:<itemizedlist>
<listitem>
<para>The driver may be able to capture higher
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
index c6ef8f13dc7e..74607b6c1117 100644
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -8,7 +8,7 @@ Properties:
"qcom,kpss-timer" - krait subsystem
"qcom,scss-timer" - scorpion subsystem
-- interrupts : Interrupts for the the debug timer, the first general purpose
+- interrupts : Interrupts for the debug timer, the first general purpose
timer, and optionally a second general purpose timer in that
order.
diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
index 93986a5a8018..3bacc8e0931e 100644
--- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
+++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -9,7 +9,7 @@ Properties:
Compatibility with many Cavium evaluation boards.
-- reg: The base address of the the CF chip select banks. Depending on
+- reg: The base address of the CF chip select banks. Depending on
the device configuration, there may be one or two banks.
- cavium,bus-width: The width of the connection to the CF devices. Valid
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
index d63194a2c848..ada4e2973323 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
@@ -39,7 +39,7 @@ Optional Properties:
- lines-initial-states: Bitmask that specifies the initial state of each
line. When a bit is set to zero, the corresponding line will be initialized to
the input (pulled-up) state. When the bit is set to one, the line will be
- initialized the the low-level output state. If the property is not specified
+ initialized the low-level output state. If the property is not specified
all lines will be initialized to the input state.
The I/O expander can detect input state changes, and thus optionally act as
diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
index d9ee909d2b78..d71258e2d456 100644
--- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
@@ -59,7 +59,7 @@ Optional properties:
Each child node represents one channel and has the following
properties:
Required properties:
- * reg: Pair of pins the the channel is connected to.
+ * reg: Pair of pins the channel is connected to.
0: VP/VN
1: VAUXP[0]/VAUXN[0]
2: VAUXP[1]/VAUXN[1]
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index ec42935f3908..5235cbc551b0 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -9,7 +9,7 @@ Required properties:
Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width
defaults to 1 byte
-- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+- nand-skip-bbtscan: Indicates the BBT scanning should be skipped
- timings: array of 6 bytes for NAND timings. The meanings of these bytes
are:
byte 0 TCLR : CLE to RE delay in number of AHB clock cycles, only 4 bits
diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
index aa7ad622259d..877da34145b0 100644
--- a/Documentation/devicetree/bindings/net/broadcom-systemport.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
@@ -3,7 +3,7 @@
Required properties:
- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the the rx
+- interrupts: interrupts for the device, first cell must be for the rx
interrupts, and the second cell should be for the transmit queues. An
optional third interrupt cell for Wake-on-LAN can be specified
- local-mac-address: Ethernet MAC address (48 bits) of this adapter
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index aff22113a986..e54896427b4a 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -373,7 +373,7 @@ variation uses the path and optionally arg1 set to an autofs mount type.
The call returns 1 if this is a mount point and sets arg1 to the device
number of the mount and field arg2 to the relevant super block magic
number (described below) or 0 if it isn't a mountpoint. In both cases
-the the device number (as returned by new_encode_dev()) is returned
+the device number (as returned by new_encode_dev()) is returned
in field arg1.
If supplied with a file descriptor we're looking for a specific mount,
@@ -387,7 +387,7 @@ is one or 0 if it isn't a mountpoint.
If a path is supplied (and the ioctlfd field is set to -1) then the path
is looked up and is checked to see if it is the root of a mount. If a
type is also given we are looking for a particular autofs mount and if
-a match isn't found a fail is returned. If the the located path is the
+a match isn't found a fail is returned. If the located path is the
root of a mount 1 is returned along with the super magic of the mount
or 0 otherwise.
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index c6594af94d25..27fb3656ec8e 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -87,7 +87,7 @@ should contain the phy name as given in the dt data and in the case of
non-dt boot, it should contain the label of the PHY. The two
devm_phy_get associates the device with the PHY using devres on
successful PHY get. On driver detach, release function is invoked on
-the the devres data and devres data is freed. phy_optional_get and
+the devres data and devres data is freed. phy_optional_get and
devm_phy_optional_get should be used when the phy is optional. These
two functions will never return -ENODEV, but instead returns NULL when
the phy cannot be found.
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index 744f82f86c58..441dd2266531 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -453,7 +453,7 @@ putback_lru_page() function to add migrated pages back to the LRU.
mmap(MAP_LOCKED) SYSTEM CALL HANDLING
-------------------------------------
-In addition the mlock()/mlockall() system calls, an application can request
+In addition to the mlock()/mlockall() system calls, an application can request
that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 32cbbd565902..df27c39b2488 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1909,7 +1909,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
+ appended to the device tree bootargs property.
endchoice
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index d1c3f3a71c94..4f697edd0bad 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -22,7 +22,7 @@
#ifndef __ASSEMBLY__
-/* Unwind reason code according the the ARM EABI documents */
+/* Unwind reason code according to the ARM EABI documents */
enum unwind_reason_code {
URC_OK = 0, /* operation completed successfully */
URC_CONTINUE_UNWIND = 8,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 9e91a4e7519a..300bd6c004de 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -753,7 +753,7 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
}
/**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * _init_main_clk - get a struct clk * for the hwmod's main functional clk
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
@@ -791,7 +791,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
}
/**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
@@ -835,7 +835,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
}
/**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 01de542432a6..6f92e75b6c35 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -423,7 +423,7 @@ static void __init imote2_stargate2_init(void)
}
#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
+/* As the imote2 doesn't currently have a conventional SD slot
* there is no option to hotplug cards, making all this rather simple
*/
static int imote2_mci_get_ro(struct device *dev)
diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S
index b93170e1cc93..d0f01cff23b3 100644
--- a/arch/arm64/crypto/aes-neon.S
+++ b/arch/arm64/crypto/aes-neon.S
@@ -47,7 +47,7 @@
prepare .LReverse_Sbox, .LReverse_ShiftRows, \temp
.endm
- /* apply SubBytes transformation using the the preloaded Sbox */
+ /* apply SubBytes transformation using the preloaded Sbox */
.macro sub_bytes, in
sub v9.16b, \in\().16b, v12.16b
tbl \in\().16b, {v16.16b-v19.16b}, \in\().16b
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 86b5a095c5a1..9c8612385e00 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -480,7 +480,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
#ifdef CONFIG_EXACT_HWERR
/* Make sure all pending read/writes complete. This will ensure any
* accesses which could cause hardware errors completes, and signal
- * the the hardware before we do something silly, like crash the
+ * the hardware before we do something silly, like crash the
* kernel. We don't need to work around anomaly 05000312, since
* we are already atomic
*/
diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c
index 86318a16a252..dc21f94aaaaf 100644
--- a/arch/c6x/platforms/cache.c
+++ b/arch/c6x/platforms/cache.c
@@ -437,7 +437,7 @@ void __init c6x_cache_init(void)
if (!cache_base)
return;
- /* Set L2 caches on the the whole L2 SRAM memory */
+ /* Set L2 caches on the whole L2 SRAM memory */
L2_cache_set_mode(L2MODE_SIZE);
/* Enable L1 */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 45698cd15b7b..bd6ea40f3ef9 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -23,7 +23,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
* The pad bits in the middle are used to prevent the next_ticket number
* overflowing into the now_serving number.
*
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index 53e9dfacd073..3ea4168f28f7 100644
--- a/arch/ia64/include/asm/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -257,7 +257,7 @@ static inline int uv_numa_blade_id(void)
return 0;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return 0;
diff --git a/arch/m68k/platform/coldfire/intc-2.c b/arch/m68k/platform/coldfire/intc-2.c
index 995093357c59..f74f0e473119 100644
--- a/arch/m68k/platform/coldfire/intc-2.c
+++ b/arch/m68k/platform/coldfire/intc-2.c
@@ -7,7 +7,7 @@
* family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
* controllers, and the 547x and 548x families which have only one of them.
*
- * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * The external 7 fixed interrupts are part of the Edge Port unit of these
* ColdFire parts. They can be configured as level or edge triggered.
*
* (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff986a23..30052da1f1a4 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -211,7 +211,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
/*
* Get a pointer to where the new child's register block should have
* been pushed.
- * The Meta's stack grows upwards, and the context is the the first
+ * The Meta's stack grows upwards, and the context is the first
* thing to be pushed by TBX (phew)
*/
*childregs = *current_pt_regs();
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 0536bc021cc6..b417be09196d 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -445,7 +445,7 @@ TRAP_return: /* Make global symbol for debugging */
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look like the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index bfeb8f3c0be6..203767dbeb64 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -16,7 +16,7 @@
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
* is to trigger a wakeup.
*/
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index df69bfd2b006..4ec669f5b0d4 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index)
* offsetof() to determine the offsets into packet headers.
* For example, offsetof(ethhdr, protocol) returns the offset
* of the ethernet protocol field. The bitmask selects which
- * bytes to include the the tag, with bit offset X selecting
+ * bytes to include in the tag, with bit offset X selecting
* byte at offset X from the beginning of the packet data.
* @len: Number of bytes to include. Usually this is the sizeof()
* the field.
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index 78d201fb6c87..b6f41f6b6c70 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -31,7 +31,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*/
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index cd7114147ae7..6660ac807d5a 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -1191,7 +1191,7 @@ int __init kvm_mips_init(void)
* requires TLBs. The TLB handling code is statically linked with
* the rest of the kernel (tlb.c) to avoid the possibility of
* double faulting. The issue is that the TLB code references
- * routines that are part of the the KVM module, which are only
+ * routines that are part of the KVM module, which are only
* available once the module is loaded.
*/
kvm_mips_gfn_to_pfn = gfn_to_pfn;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 05b1d7cf9514..1647426364b9 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -350,7 +350,7 @@ static void co_cache_error_call_notifiers(unsigned long val)
}
/*
- * Called when the the exception is recoverable
+ * Called when the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -359,7 +359,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
}
/**
- * Called when the the exception is not recoverable
+ * Called when the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d428e8471eec..1d1eb1e10ae2 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -144,7 +144,7 @@ void xlr_percpu_fmn_init(void)
* For sending FMN messages, we need credits on the destination
* bucket. Program the credits this core has on the 128 possible
* destination buckets.
- * We cannot use a loop here, because the the first argument has
+ * We cannot use a loop here, because the first argument has
* to be a constant integer value.
*/
COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 34a05a1a990b..af6f17b32531 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -52,7 +52,7 @@ static inline void logmpp(u64 x)
/*
* For a snooping icache, we still need a dummy icbi to purge all the
* prefetched instructions from the ifetch buffers. We also need a sync
- * before the icbi to order the the actual stores to memory that might
+ * before the icbi to order the actual stores to memory that might
* have modified instructions with the icbi.
*/
#define PURGE_PREFETCHED_INS \
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index 334459ad145b..b3219b0ca2c4 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -246,7 +246,7 @@ static inline unsigned int ev_int_get_mask(unsigned int interrupt,
* ev_int_eoi - signal the end of interrupt processing
* @interrupt: the interrupt number
*
- * This function signals the end of processing for the the specified
+ * This function signals the end of processing for the specified
* interrupt, which must be the interrupt currently in service. By
* definition, this is also the highest-priority interrupt.
*
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index ac6432d9be46..a18702780733 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -30,7 +30,7 @@ struct arch_hw_breakpoint {
u16 len; /* length of the target data symbol */
};
-/* Note: Don't change the the first 6 bits below as they are in the same order
+/* Note: Don't change the first 6 bits below as they are in the same order
* as the dabr and dabrx.
*/
#define HW_BRK_TYPE_READ 0x01
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index d48125d0c048..01ecece4ca83 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -94,7 +94,7 @@ __secondary_hold_acknowledge:
#ifdef CONFIG_RELOCATABLE
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
- * is used by kexec-tools to keep the the kdump kernel in the
+ * is used by kexec-tools to keep the kdump kernel in the
* crash_kernel region. The loader is responsible for
* observing the alignment requirement.
*/
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index d8746684f606..a97b81d5cfa6 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -168,7 +168,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on powerpc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 7e70ae968e5f..bf66090de7cc 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -933,7 +933,7 @@ void flush_dcache_icache_hugepage(struct page *page)
* (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table
*
* So long as we atomically load page table pointers we are safe against teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 692998244d2c..a2ce00831362 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -9,7 +9,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * This file is a driver for the the General Purpose Timer (gpt) devices
+ * This file is a driver for the General Purpose Timer (gpt) devices
* found on the MPC5200 SoC. Each timer has an IO pin which can be used
* for GPIO or can be used to raise interrupts. The timer function can
* be used independently from the IO pin, or it can be used to control
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 7044fd36197b..864ced973445 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -251,7 +251,7 @@ static void briq_restart(char *cmd)
* Per default, input/output-device points to the keyboard/screen
* If no card is installed, the built-in serial port is used as a fallback.
* But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
- * the the built-in serial node. Instead, a /failsafe node is created.
+ * to the built-in serial node. Instead, a /failsafe node is created.
*/
static void chrp_init_early(void)
{
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index df241b11d4f7..b7bb2977e87a 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1421,7 +1421,7 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
/*
* This function is supposed to be called on basis of PE from top
- * to bottom style. So the the I/O or MMIO segment assigned to
+ * to bottom style. So the I/O or MMIO segment assigned to
* parent PE could be overrided by its child PEs if necessary.
*/
static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index ea0c7b2ef030..a0b4797a296d 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1128,7 +1128,7 @@ static void debug_sample_entry(struct hws_combined_entry *sample,
* combined-sampling data entry consists of a basic- and a diagnostic-sampling
* data entry. The sampling function is determined by the flags in the perf
* event hardware structure. The function always works with a combined-sampling
- * data entry but ignores the the diagnostic portion if it is not available.
+ * data entry but ignores the diagnostic portion if it is not available.
*
* Note that the implementation focuses on basic-sampling data entries and, if
* such an entry is not valid, the entire combined-sampling data entry is
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 639fce464008..2f03d7badf95 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -187,7 +187,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* prevent the pagetables from being freed on s390.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f49478..ef36086d3db1 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -306,7 +306,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
+ * firmware can sample the value before the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index 1aed0432c64b..74ed2d607036 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -189,7 +189,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on sparc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_disable();
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 71af5747874d..f7f64c80c5b2 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -116,7 +116,7 @@
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
* Likewise, INTCTRL_K is removed and re-added during device
- * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * interrupts, as is the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
* to know our current state.
diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h
index df10a662cc25..50a3d5cbad20 100644
--- a/arch/tile/include/gxio/trio.h
+++ b/arch/tile/include/gxio/trio.h
@@ -206,7 +206,7 @@ typedef struct {
/* Initialize a TRIO context.
*
* This function allocates a TRIO "service domain" and maps the MMIO
- * registers into the the caller's VA space.
+ * registers into the caller's VA space.
*
* @param trio_index Which TRIO shim; Gx36 must pass 0.
* @param context Context object to be initialized.
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index de07fa7d1315..c554ffbb50f7 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -277,7 +277,7 @@ P("\n");
/*
* Called after execve() has started the new image. This allows us
- * to reset the info state. Note that the the mmap'ed memory, if there
+ * to reset the info state. Note that the mmap'ed memory, if there
* was any, has already been unmapped by the exec.
*/
void single_step_execve(void)
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index 54f1c8068c02..04266c294db1 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -71,7 +71,7 @@ static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*
* We use an xadd covering *both* parts of the lock, to increment the tail and
* also load the position of the head, which takes care of memory ordering
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index c63e925fd6b7..361144223ed7 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -512,7 +512,7 @@ static inline int uv_numa_blade_id(void)
return uv_hub_info->numa_blade_id;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return uv_cpu_to_blade[cpu];
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 8f1e22d3b286..5dc89fb405be 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7219,7 +7219,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
if (current->mm == kvm->mm) {
/*
* Free memory regions allocated on behalf of userspace,
- * unless the the memory map has changed due to process exit
+ * unless the memory map has changed due to process exit
* or fd copying.
*/
struct kvm_userspace_memory_region mem;
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 207d9aef662d..a1f84cebb9aa 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -288,7 +288,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
@@ -360,7 +360,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_disable();
pgdp = pgd_offset(mm, addr);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 2e555163c2fe..80e25d7659a2 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -472,7 +472,7 @@ char * __init xen_memory_setup(void)
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
- * We tried to make the the memblock_reserve more selective so
+ * We tried to make the memblock_reserve more selective so
* that it would be clear what region is reserved. Sadly we ran
* in the problem wherein on a 64-bit hypervisor with a 32-bit
* initial domain, the pt_base has the cr3 value which is not
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 600781edc8a3..2e1d20d0b71f 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -6,7 +6,7 @@
* For the new V3 MMU we remap the TLB from virtual == physical
* to the standard Linux mapping used in earlier MMU's.
*
- * The the MMU we also support a new configuration register that
+ * In the MMU we also support a new configuration register that
* specifies how the S32C1I instruction operates with the cache
* controller.
*
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 82bbfa5a05b3..5f2cdfe6f0c2 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
* of the proper size instead.
*
* This algorithm simply backs out the register changes started by the user
- * excpetion handler, makes it appear that we have started a window underflow
+ * exception handler, makes it appear that we have started a window underflow
* by rotating the window back and then setting the old window base (OWB) in
* the 'ps' register with the rolled back window base. The 'movsp' instruction
* will be re-executed and this time since the next window frames is in the
* active AR registers it won't cause an exception.
*
* If the WindowUnderflow code gets a TLB miss the page will get mapped
- * the the partial windeowUnderflow will be handeled in the double exception
+ * and the partial windeowUnderflow will be handeled in the double exception
* handler.
*
* Entry condition:
diff --git a/crypto/asymmetric_keys/pkcs7_parser.h b/crypto/asymmetric_keys/pkcs7_parser.h
index d25f4d15370f..31a2ee79dae7 100644
--- a/crypto/asymmetric_keys/pkcs7_parser.h
+++ b/crypto/asymmetric_keys/pkcs7_parser.h
@@ -42,7 +42,7 @@ struct pkcs7_signed_info {
*
* This contains the generated digest of _either_ the Content Data or
* the Authenticated Attributes [RFC2315 9.3]. If the latter, one of
- * the attributes contains the digest of the the Content Data within
+ * the attributes contains the digest of the Content Data within
* it.
*/
struct public_key_signature sig;
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 6f1c616910ac..826a754954f3 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -47,7 +47,7 @@
/*
* Common set of includes for all ACPICA source files.
* We put them here because we don't want to duplicate them
- * in the the source code again and again.
+ * in the source code again and again.
*
* Note: The order of these include files is important.
*/
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 41519a958083..75e61da5d998 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -435,7 +435,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
* The 64-bit X fields are optional extensions to the original 32-bit FADT
* V1.0 fields. Even if they are present in the FADT, they are optional and
* are unused if the BIOS sets them to zero. Therefore, we must copy/expand
- * 32-bit V1.0 fields to the 64-bit X fields if the the 64-bit X field is
+ * 32-bit V1.0 fields to the 64-bit X fields if the 64-bit X field is
* originally zero.
*
* For ACPI 1.0 FADTs (that contain no 64-bit addresses), all 32-bit address
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index dd9dfa15e9d1..d086acf9562f 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -563,7 +563,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
wake_up_interruptible(&apm_waitqueue);
/*
- * Wait for the the suspend_acks_pending variable to drop to
+ * Wait for the suspend_acks_pending variable to drop to
* zero, meaning everybody acked the suspend event (or the
* process was killed.)
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 02225eb19cf6..619f3a30ec55 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -111,7 +111,7 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
}
/**
- * fifo_icap_set_read_size - Set the the size register.
+ * fifo_icap_set_read_size - Set the size register.
* @drvdata: a pointer to the drvdata.
* @data: the size of the following read transaction, in words.
**/
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index e431d11abf8d..231f0149c540 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -168,7 +168,7 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv)
/*
* Look for the timer stop flag in the different states, so that we know
* if the broadcast timer has to be set up. The loop is in the reverse
- * order, because usually one of the deeper states have this flag set.
+ * order, because usually one of the deeper states has this flag set.
*/
for (i = drv->state_count - 1; i >= 0 ; i--) {
if (drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP) {
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 5da5b98b8f29..60f2267c1350 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -53,7 +53,7 @@
#define CMD0_IRQ_THRESHOLD 1
/*
- * The timeout period (in jiffies) for a PDU. When the the number of PDUs in
+ * The timeout period (in jiffies) for a PDU. When the number of PDUs in
* flight is greater than the STAT_IRQ_THRESHOLD or 0 the timer is disabled.
* When there are packets in flight but lower than the threshold, we enable
* the timer and at expiry, attempt to remove any processed packets from the
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 1c73f4fbc252..2f2a4276a014 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -435,7 +435,7 @@ static int hash_get_device_data(struct hash_ctx *ctx,
* @keylen: The lengt of the key.
*
* Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the the hw design spec. Either due to incorrect info in the
+ * specified in the hw design spec. Either due to incorrect info in the
* spec or due to a bug in the hw.
*/
static void hash_hw_write_key(struct hash_device_data *device_data,
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 3784e81e7762..d548a717d5b9 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -471,7 +471,7 @@ static int ichx_gpio_probe(struct platform_device *pdev)
/*
* If necessary, determine the I/O address of ACPI/power management
- * registers which are needed to read the the GPE0 register for GPI pins
+ * registers which are needed to read the GPE0 register for GPI pins
* 0 - 15 on some chipsets.
*/
if (!ichx_priv.desc->uses_gpe0)
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 41e91d70301e..9b43e701db28 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -111,7 +111,7 @@ static int sch_gpio_core_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
@@ -201,7 +201,7 @@ static int sch_gpio_resume_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 04a209e2b66d..ff92d4c5e379 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -529,12 +529,12 @@ EXPORT_SYMBOL(drm_mm_replace_node);
*
* The DRM range allocator supports this use-case through the scanning
* interfaces. First a scan operation needs to be initialized with
- * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The the driver adds
+ * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The driver adds
* objects to the roaster (probably by walking an LRU list, but this can be
* freely implemented) until a suitable hole is found or there's no further
* evitable object.
*
- * The the driver must walk through all objects again in exactly the reverse
+ * The driver must walk through all objects again in exactly the reverse
* order to restore the allocator state. Note that while the allocator is used
* in the scan mode no other operation is allowed.
*
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ad55b06a3cb1..a73c82dff95f 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2366,7 +2366,7 @@ int __i915_add_request(struct intel_engine_cs *ring,
/* Whilst this request exists, batch_obj will be on the
* active_list, and so will hold the active reference. Only when this
- * request is retired will the the batch_obj be moved onto the
+ * request is retired will the batch_obj be moved onto the
* inactive_list and lose its active reference. Hence we do not need
* to explicitly hold another reference here.
*/
diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c
index d38413997379..7a6a4fed2833 100644
--- a/drivers/gpu/drm/i915/i915_gem_userptr.c
+++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
@@ -225,7 +225,7 @@ i915_mmu_notifier_add(struct drm_device *dev,
* either has cancelled gup work queued and we need to
* return back to the user to give time for the gup-workers
* to flush their object references upon which the object will
- * be removed from the interval-tree, or the the range is
+ * be removed from the interval-tree, or the range is
* still in use by another client and the overlap is invalid.
*
* If we do have an overlap, we cannot use the interval tree
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d8324c69fa86..7b3d64f2ad3f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2607,7 +2607,7 @@ void intel_display_handle_reset(struct drm_device *dev)
* will get its events and not get stuck.
*
* Also update the base address of all primary
- * planes to the the last fb to make sure we're
+ * planes to the last fb to make sure we're
* showing the correct fb after a reset.
*
* Need to make two loops over the crtcs so that we
@@ -10854,7 +10854,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
}
/* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
+ * update the output configuration. */
intel_modeset_update_state(dev, prepare_pipes);
if (dev_priv->display.modeset_global_resources)
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 92be50c39ffd..2be3040b28f1 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -2802,8 +2802,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t
ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 00c0d2ba22d3..36af5f14f622 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -353,7 +353,7 @@
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 12c8329644c4..212cc45defc7 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -379,7 +379,7 @@ void radeon_doorbell_free(struct radeon_device *rdev, u32 doorbell)
/*
* radeon_wb_*()
- * Writeback is the the method by which the the GPU updates special pages
+ * Writeback is the method by which the GPU updates special pages
* in memory with the status of certain GPU events (fences, ring pointers,
* etc.).
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 913787085dfa..d616aea4a52c 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -45,7 +45,7 @@
* for GPU/CPU synchronization. When the fence is written,
* it is expected that all buffers associated with that fence
* are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed. Whether
+ * that the relevant GPU caches have been flushed. Whether
* we use a scratch register or memory location depends on the asic
* and whether writeback is enabled.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c
index 088ffdc2f577..6dbaac58c81e 100644
--- a/drivers/gpu/drm/radeon/radeon_vm.c
+++ b/drivers/gpu/drm/radeon/radeon_vm.c
@@ -40,8 +40,8 @@
* can be mapped as snooped (cached system pages) or unsnooped
* (uncached system pages).
* Each VM has an ID associated with it and there is a page table
- * associated with each VMID. When execting a command buffer,
- * the kernel tells the the ring what VMID to use for that command
+ * associated with each VMID. When executing a command buffer,
+ * the kernel tells the ring what VMID to use for that command
* buffer. VMIDs are allocated dynamically as commands are submitted.
* The userspace drivers maintain their own address space and the kernel
* sets up their pages tables accordingly when they submit their
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 531a593912ec..90947e08e44d 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -553,7 +553,7 @@ EXPORT_SYMBOL_GPL(vmbus_close);
* vmbus_sendpacket() - Send the specified buffer on the given channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @requestid: Identifier of the request
* @type: Type of packet that is being send e.g. negotiate, time
* packet etc.
@@ -730,7 +730,7 @@ EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
* vmbus_recvpacket() - Retrieve the user packet on the specified channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @buffer_actual_len: The actual size of the data after it was received
* @requestid: Identifier of the request
*
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 4d6b26979fbd..5a358e591403 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -849,8 +849,8 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the information we
- * need from DSDT.
+ * VMBUS is an acpi enumerated device. Get the IRQ information
+ * from DSDT.
*/
static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index 033d6aca47d3..d41d7e3bf31c 100644
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -117,7 +117,7 @@ static int ucd9200_probe(struct i2c_client *client,
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
- * for the the phases of the rail.
+ * for the phases of the rail.
*/
for (i = 0; i < info->pages; i++) {
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 28cfe97cf1e9..231b54591e2b 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -87,7 +87,7 @@
* These 3 values (SDR and DDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
+ * are also the possible values for ipath_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define IPATH_IB_SDR 1
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index c00ae093b6f8..6b6499a690af 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -333,7 +333,7 @@ struct qib_verbs_txreq {
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for qib_link_speed_enabled and active
+ * are also the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 8c7d94200bdb..c1418e619f0c 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -17,7 +17,7 @@
/*
* Timer function which is run every scan_ms ms when the device is opened.
- * The dev input variable is set to the the input_dev pointer.
+ * The dev input variable is set to the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_polled_dev *dev)
{
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 114f3bcba1b0..24c15bfb2199 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1566,7 +1566,7 @@ reset_hfcsusb(struct hfcsusb *hw)
write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
((hw->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 6590558d1d31..010d3c6cd5f4 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -202,7 +202,7 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
/*:*/
/*H:030
- * Let's jump straight to the the main loop which runs the Guest.
+ * Let's jump straight to the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
* going around and around until something interesting happens.
*/
diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h
index e404b6e44802..ce0fb855c705 100644
--- a/drivers/media/dvb-frontends/tda1002x.h
+++ b/drivers/media/dvb-frontends/tda1002x.h
@@ -1,6 +1,6 @@
/*
TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index 71fb63299de7..17534ff576ca 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1134,7 +1134,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
state->pll_pfactor = 0;
}
- /* Establish any defaults the the user didn't pass */
+ /* Establish any defaults the user didn't pass */
tda10048_establish_defaults(&state->frontend);
/* Set the xtal and freq defaults */
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..1f8820f5f8c0 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -37,7 +37,7 @@
(compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
/* We calculate the baseband frequencies of the carrier and the pilot tones
- * based on the the sampling rate of the audio rds fifo. */
+ * based on the sampling rate of the audio rds fifo. */
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index 2ad65eb29832..00e0818abfc9 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -555,7 +555,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f)
reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94);
/* Okay, we've wasted time working out the correct value,
- but if we use it, it fouls the the window alignment.
+ but if we use it, it fouls the window alignment.
Fudge it to what we want... */
reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16));
reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16));
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 1bf06970ca3e..ab627dfd7b28 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -636,7 +636,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
}
/* Check that the hardware is accessible. If the status bytes are
- * 0xFF then the device is not accessible, the the IRQ belongs
+ * 0xFF then the device is not accessible, the IRQ belongs
* to another driver.
* 4 x u32 interrupt registers.
*/
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 33b9660b7f77..6ea16e20449d 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -316,7 +316,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
* vpbe_get_output - Get output
* @vpbe_dev - vpbe device ptr
*
- * return current vpbe output to the the index
+ * return current vpbe output to the index
*/
static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
{
diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 3d2babd5067a..b8181874a149 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -505,7 +505,7 @@ static int fimc_capture_open(struct file *file)
if (ret == 0 && vc->user_subdev_api && vc->inh_sensor_ctrls) {
/*
- * Recreate controls of the the video node to drop
+ * Recreate controls of the video node to drop
* any controls inherited from the sensor subdev.
*/
fimc_ctrls_delete(vc->ctx);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 2c7aa6720569..5b8a0e779d0f 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1710,7 +1710,7 @@ void omap3isp_print_status(struct isp_device *isp)
* To solve this problem power management support is split into prepare/complete
* and suspend/resume operations. The pipelines are stopped in prepare() and the
* ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
- * resume(), and the the pipelines are restarted in complete().
+ * resume(), and the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not modelled explicitly
* yet.
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index d56f927fc31a..b5d2e805380d 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 474a17e4db0c..4c7f8fed8046 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h
index 0f461ca10cb9..82d19dcdebc0 100644
--- a/drivers/media/usb/dvb-usb/friio.h
+++ b/drivers/media/usb/dvb-usb/friio.h
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
index 52bdb569760b..414c1b752911 100644
--- a/drivers/media/usb/gspca/finepix.c
+++ b/drivers/media/usb/gspca/finepix.c
@@ -143,7 +143,7 @@ again:
* for, then it's the end of the
* frame. Sometimes the jpeg is not complete,
* but there's nothing we can do. We also end
- * here if the the jpeg ends right at the end
+ * here if the jpeg ends right at the end
* of the frame. */
gspca_frame_add(gspca_dev, LAST_PACKET,
data, len);
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 2e8c3afe4ec4..b7b5a1f630af 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1313,7 +1313,7 @@ static int tm6000_usb_probe(struct usb_interface *interface,
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
-/* check if the the device has the iso in endpoint at the correct place */
+/* check if the device has the iso in endpoint at the correct place */
if (!dev->isoc_in.endp) {
printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
rc = -ENODEV;
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 9144a2f3ed82..62adffa2bd50 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1000,7 +1000,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
}
/* Synchronize to the input stream by waiting for the FID bit to be
- * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE.
* stream->last_fid is initialized to -1, so the first isochronous
* frame will always be in sync.
*
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index d15e16737eef..32d8d6a07e99 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -981,7 +981,7 @@ static void v4l_sanitize_format(struct v4l2_format *fmt)
/*
* The v4l2_pix_format structure has been extended with fields that were
* not previously required to be set to zero by applications. The priv
- * field, when set to a magic value, indicates the the extended fields
+ * field, when set to a magic value, indicates that the extended fields
* are valid. Otherwise they will contain undefined values. To simplify
* the API towards drivers zero the extended fields and set the priv
* field to the magic value when the extended pixel format structure
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 04644e7b42b1..303b322756c7 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -373,7 +373,7 @@ static const struct lpddr2_addressing *get_addressing_table(
}
/*
- * Find the the right timing table from the array of timing
+ * Find the right timing table from the array of timing
* tables of the device using DDR clock frequency
*/
static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 787933d43d32..4328cf6ecf13 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
* @target: per target private data
* @sdev: SCSI device
*
- * Update the target negotiation parameters based on the the Inquiry
+ * Update the target negotiation parameters based on the Inquiry
* data, adapter capabilities, and NVRAM settings.
**/
static void
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 193cf168ba84..5d03af1f5103 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -898,7 +898,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
- * This function sets the the operating point of the ARM.
+ * This function sets the operating point of the ARM.
*/
int db8500_prcmu_set_arm_opp(u8 opp)
{
diff --git a/drivers/misc/mic/bus/mic_bus.c b/drivers/misc/mic/bus/mic_bus.c
index 961ae90aae47..1b15af8c5101 100644
--- a/drivers/misc/mic/bus/mic_bus.c
+++ b/drivers/misc/mic/bus/mic_bus.c
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ drivers/virtio/virtio.c
*/
#include <linux/slab.h>
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 913de07e577c..6482a9c4eb44 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -48,7 +48,7 @@
* kernel/user requirements.
*
* Blade percpu resources reserved for kernel use. These resources are
- * reserved whenever the the kernel context for the blade is loaded. Note
+ * reserved whenever the kernel context for the blade is loaded. Note
* that the kernel context is not guaranteed to be always available. It is
* loaded on demand & can be stolen by a user if the user demand exceeds the
* kernel demand. The kernel can always reload the kernel context but
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 95c894482fdd..f87520cfb787 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1594,7 +1594,7 @@ out_2:
* by xpc_notify_senders_of_disconnect_uv(), and to also get an
* error returned here will confuse them. Additionally, since
* in this case the channel is being disconnected we don't need
- * to put the the msg_slot back on the free list.
+ * to put the msg_slot back on the free list.
*/
if (cmpxchg(&msg_slot->func, func, NULL) != func) {
ret = xpSuccess;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 959cb9b70310..c5b1237ecb33 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -942,7 +942,7 @@ static uint8_t gpmi_read_byte(struct mtd_info *mtd)
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
- * because the the operations are the same.
+ * because the operations are the same.
*/
static void block_mark_swapping(struct gpmi_nand_data *this,
void *payload, void *auxiliary)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 7bf416329c19..3430b17875b5 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -252,7 +252,7 @@ struct ubi_fm_pool {
/**
* struct ubi_volume - UBI volume description data structure.
- * @dev: device object to make use of the the Linux device model
+ * @dev: device object to make use of the Linux device model
* @cdev: character device object to create character device
* @ubi: reference to the UBI device description object
* @vol_id: volume ID
@@ -380,7 +380,7 @@ struct ubi_debug_info {
/**
* struct ubi_device - UBI device description structure
- * @dev: UBI device object to use the the Linux device model
+ * @dev: UBI device object to use for the Linux device model
* @cdev: character device object to create character device
* @ubi_num: UBI device number
* @ubi_name: UBI device name
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 20f491713145..72b64109a22f 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -727,7 +727,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
/**
* sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
- * @e: the the physical eraseblock to erase
+ * @e: the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
*
* This function returns zero in case of success and a negative error code in
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 5e8b5609c067..ad5bfe8618a6 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -532,7 +532,7 @@ static int xcan_rx(struct net_device *ndev)
* @isr: interrupt status register value
*
* This is the CAN error interrupt and it will
- * check the the type of error and forward the error
+ * check the type of error and forward the error
* frame to upper layers.
*/
static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index 25d6b2a10e4e..a6fa3c211f69 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1234,7 +1234,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
* @budget : maximum number of packets that the current CPU can receive from
* all interfaces.
* Description :
- * This function implements the the reception process.
+ * This function implements the reception process.
* Also it runs the TX completion thread
*/
static int xgmac_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 93ff8ef39352..50a7353a85c8 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2363,7 +2363,7 @@ static irqreturn_t be_intx(int irq, void *dev)
}
be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- /* Return IRQ_HANDLED only for the the first spurious intr
+ /* Return IRQ_HANDLED only for the first spurious intr
* after a valid intr to stop the kernel from branding
* this irq as a bad one!
*/
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 1acf5034db10..ee82072b4c08 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -3986,7 +3986,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
* @hw: Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*/
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 48b74a549155..392eb5748897 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3892,7 +3892,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
* @hw: pointer to the HW structure
*
* ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
- * register, so the the bus width is hard coded.
+ * register, so the bus width is hard coded.
**/
static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 236a6183a865..0172e6b70eee 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2166,7 +2166,7 @@ out:
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 87bd53fdd209..81e6836f38ee 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -229,7 +229,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
struct pci_dev *pdev;
- /* determine whether to use the the parent device
+ /* determine whether to use the parent device
*/
if (ixgbe_pcie_from_parent(&adapter->hw))
pdev = adapter->pdev->bus->parent->self;
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index f5e4b820128b..aad8fdb4dfc6 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2158,7 +2158,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
/*
* In PCI 33 mode, the P_PLL is not used, and therefore,
- * the the P_PLL_LOCK bit in the adapter_status register will
+ * the P_PLL_LOCK bit in the adapter_status register will
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 3b67d60d4378..b8da6e89059a 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -83,7 +83,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* returns: 0 on success, -ETIMEDOUT on a timeout
*
* Writes the value to the requested register by first writing the value
- * into MWD register. The the MCR register is then appropriately setup
+ * into MWD register. The MCR register is then appropriately setup
* to finish the write operation.
*/
static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 5a34e72bab9a..6113a29f01bc 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -250,14 +250,14 @@ struct i2400m_barker_db;
*
* @bus_setup: [optional fill] Function called by the bus-generic code
* [i2400m_setup()] to setup the basic bus-specific communications
- * to the the device needed to load firmware. See LIFE CYCLE above.
+ * to the device needed to load firmware. See LIFE CYCLE above.
*
* NOTE: Doesn't need to upload the firmware, as that is taken
* care of by the bus-generic code.
*
* @bus_release: [optional fill] Function called by the bus-generic
* code [i2400m_release()] to shutdown the basic bus-specific
- * communications to the the device needed to load firmware. See
+ * communications to the device needed to load firmware. See
* LIFE CYCLE above.
*
* This function does not need to reset the device, just tear down
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 0b602951ff6b..4466ee71d1e4 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -693,7 +693,7 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq,
* right spot where to insert the packet; we know the queue is
* not empty, so we are not the first ones; we also know we
* are not going to be the last ones. The list is sorted, so
- * we have to insert before the the first guy with an nsn_itr
+ * we have to insert before the first guy with an nsn_itr
* greater that our nsn. */
skb_queue_walk(&roq->queue, skb_itr) {
roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb;
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index f20886ade1cc..1f7b2b922fae 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -233,7 +233,7 @@
* i2400m_tx_skip_tail() Marks unusable FIFO tail space
* i2400m->bus_tx_kick()
*
- * Now i2400m->bus_tx_kick() is the the bus-specific driver backend
+ * Now i2400m->bus_tx_kick() is the bus-specific driver backend
* implementation; that would do:
*
* i2400m->bus_tx_kick()
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index 1c584c4b019c..f34f24d362ed 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -77,7 +77,7 @@ struct rx_attention {
* first_msdu is set.
*
* peer_idx_invalid
- * Indicates no matching entries within the the max search
+ * Indicates no matching entries within the max search
* count. Only set when first_msdu is set.
*
* peer_idx_timeout
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index dc6bd8cd9b83..e32154fe1732 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -98,7 +98,7 @@ struct bus_request {
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- * implemented using the asynchronous mode allowing the the bus
+ * implemented using the asynchronous mode allowing the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 339d89f14d32..8c866de2fe43 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1173,7 +1173,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
* Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
+ * response is available in the FIFO
*
* CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index 9a2afa2c690b..5184d6cbcb90 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -638,7 +638,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN,
AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT);
- /* on AR92xx, the highest bit of count will make the the chip send
+ /* on AR92xx, the highest bit of count will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 542a8d51d3b0..5c8f1e6da5dc 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1627,7 +1627,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
- /* on AR93xx and newer, count = 0 will make the the chip send
+ /* on AR93xx and newer, count = 0 will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index a1f1127d7808..f3aa063dee4b 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -1609,7 +1609,7 @@ struct wcn36xx_hal_config_bss_params {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -1746,7 +1746,7 @@ struct wcn36xx_hal_config_bss_params_v1 {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -3739,7 +3739,7 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
/* Length of the responce message */
u32 rsp_length;
- /* FIXME: Currently considering the the responce will be less than
+ /* FIXME: Currently considering that the responce will be less than
* 100bytes */
u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
} __packed;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 1b474828d5b8..46a0d6575454 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3819,7 +3819,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
}
/*
- * Suspend the the MAC and update the slot timing
+ * Suspend the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index d6073f67b212..c2f550cfbf41 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -189,7 +189,7 @@ enum iwl_tx_flags {
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
+ * @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @key: security key
* @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
@@ -552,7 +552,7 @@ struct iwl_extended_beacon_notif {
/**
* enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
+ * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
index 6cc243f7cf60..8357397cf7d0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
@@ -65,7 +65,7 @@
#include "fw-api.h"
#include "mvm.h"
-/* Maps the driver specific channel width definition to the the fw values */
+/* Maps the driver specific channel width definition to the fw values */
static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
{
switch (chandef->width) {
@@ -86,7 +86,7 @@ static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
/*
* Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
+ * freq) definitions to the fw values
*/
static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index 2713f7acd35e..53618b0e29c0 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -262,7 +262,7 @@ free_and_exit:
* This function is called when the 'fw_dump' file is opened for
* reading.
* This function dumps firmware memory in different files
- * (ex. DTCM, ITCM, SQRAM etc.) based on the the segments for
+ * (ex. DTCM, ITCM, SQRAM etc.) based on the segments for
* debugging.
*/
static ssize_t
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 8428858204a6..e1f05ad89d9e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -596,7 +596,7 @@ static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
* rsi_sdio_host_intf_read_pkt() - This function reads the packet
from the device.
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
* @length: Length of the data to be read from the device.
*
* Return: 0 on success, -1 on failure.
@@ -627,7 +627,7 @@ int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter,
* rsi_init_sdio_interface() - This function does init specific to SDIO.
*
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
*
* Return: 0 on success, -1 on failure.
*/
diff --git a/drivers/net/wireless/ti/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h
index 2bdec38699f4..bfe998947957 100644
--- a/drivers/net/wireless/ti/wl1251/acx.h
+++ b/drivers/net/wireless/ti/wl1251/acx.h
@@ -1243,7 +1243,7 @@ struct wl1251_acx_arp_filter {
u8 address[16]; /* The IP address used to filter ARP packets.
ARP packets that do not match this address are
dropped. When the IP Version is 4, the last 12
- bytes of the the address are ignored. */
+ bytes of the address are ignored. */
} __attribute__((packed));
struct wl1251_acx_ac_cfg {
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 293ed4b687ba..be53777b9f3d 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1849,7 +1849,7 @@ static void of_alias_add(struct alias_prop *ap, struct device_node *np,
* of_alias_scan - Scan all properties of 'aliases' node
*
* The function scans all the properties of 'aliases' node and populate
- * the the global lookup table with the properties. It returns the
+ * the global lookup table with the properties. It returns the
* number of alias_prop found, or error code in error case.
*
* @dt_alloc: An allocator that provides a virtual address to memory
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 6cd5160fc057..89f16d320ead 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -36,7 +36,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#define pr_fmt(fmt) "acpiphp_glue: " fmt
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
index 7dfef3ee5b53..40511e39cea5 100644
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ b/drivers/pcmcia/pxa2xx_hx4700.c
@@ -33,7 +33,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/*
* IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
* The asic3 default IRQ type is level trigger low level detect, exactly
- * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+ * the signal present on GPIOD4_CF_nCD when a CF card is inserted.
* If the IRQ type is not changed, the asic3 interrupt handler will loop
* repeatedly because it is unable to clear the level trigger interrupt.
*/
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index e7cab07eef47..37060a07f260 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1250,7 +1250,7 @@ static int nmk_gpio_probe(struct platform_device *dev)
platform_set_drvdata(dev, nmk_chip);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 60464a2648aa..67a538ebea90 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1461,7 +1461,7 @@ static int at91_gpio_of_irq_setup(struct device_node *node,
writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 750a20275664..b01c7698df02 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -298,8 +298,9 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
ret = power_supply_show_property(dev, attr, prop_buf);
if (ret == -ENODEV || ret == -ENODATA) {
- /* When a battery is absent, we expect -ENODEV. Don't abort;
- send the uevent with at least the the PRESENT=0 property */
+ /* When a battery is absent, we expect -ENODEV.
+ * Don't abort; send the uevent with at least
+ * the PRESENT=0 property */
ret = 0;
continue;
}
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index ccf54f06396b..2108302cc965 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -122,7 +122,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
- * configurations, so we use the the first method there, stripping off
+ * configurations, so we use the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index fd22c811cbe1..8a84e2e42ca2 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3454,7 +3454,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 2035b0d64351..e62a7346428a 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1983,7 +1983,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
/*
* Device's PID has changed. We need to cleanup
* and re-login. If there is another device with
- * the the newly discovered pid, send an scn notice
+ * the newly discovered pid, send an scn notice
* so that its new pid can be discovered.
*/
list_for_each(qe, &rport->port->rport_q) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 00ee0ed642aa..0b88610b9795 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -510,7 +510,7 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
* @skb: The receive skb
* @netdev: The associated net device
* @ptype: The packet_type structure which was used to register this handler
- * @orig_dev: The original net_device the the skb was received on.
+ * @orig_dev: The original net_device that the skb was received on.
* (in case dev is a bond)
*
* Returns: 0 for success
@@ -2727,7 +2727,7 @@ module_exit(fcoe_exit);
* fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
* @seq: active sequence in the FLOGI or FDISC exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
@@ -2756,7 +2756,7 @@ done:
* fcoe_logo_resp() - FCoE specific LOGO response handler
* @seq: active sequence in the LOGO exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 34a1b1f333b4..65a53a9eb059 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -213,7 +213,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new)
* that doesn't have a priv (fcf was deleted). However,
* libfcoe will always delete FCFs before trying to add
* them. This is ensured because both recv_adv and
- * age_fcfs are protected by the the fcoe_ctlr's mutex.
+ * age_fcfs are protected by the fcoe_ctlr's mutex.
* This means that we should never get a FCF with a
* non-NULL priv pointer.
*/
@@ -694,7 +694,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
*
* The caller must check that the length is a multiple of 4.
* The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
- * The the skb must also be an fc_frame.
+ * The skb must also be an fc_frame.
*
* This is called from the lower-level driver with spinlocks held,
* so we must not take a mutex here.
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 22a9bb1abae1..025ec5c10978 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -244,7 +244,7 @@ enum sci_controller_states {
SCIC_INITIALIZED,
/**
- * This state indicates the the controller is in the process of becoming
+ * This state indicates that the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 47a013fffae7..07af745220eb 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete(
* permitted. This state is entered from the INITIAL state. This state
* is entered from the STOPPING state.
*
- * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * @SCI_DEV_STARTING: This state indicates that the remote device is in
* the process of becoming ready (i.e. starting). In this state no new
* IO operations are permitted. This state is entered from the STOPPED
* state.
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
index c7ee81d01125..f22950b12b8b 100644
--- a/drivers/scsi/isci/remote_node_context.h
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state {
/**
* struct sci_remote_node_context - This structure contains the data
* associated with the remote node context object. The remote node context
- * (RNC) object models the the remote device information necessary to manage
+ * (RNC) object models the remote device information necessary to manage
* the silicon RNC.
*/
struct sci_remote_node_context {
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 5d6fda72d659..ba330e56bfe7 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -67,7 +67,7 @@
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
-* @ihost: host on which the the request was queued
+* @ihost: host on which the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 6eed9e76a166..20bdd0603108 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1680,7 +1680,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -1713,7 +1713,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -1846,7 +1846,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -1878,7 +1878,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 7a5d81a65be8..5a447c2c6522 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5813,7 +5813,7 @@ reject_out:
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful, the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 2a17e31265b8..fbad2c534691 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2012,7 +2012,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so that the round robin selection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
@@ -5727,7 +5727,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
}
/* This routine decrements the reference count for a ndlp structure. If the
- * count goes to 0, this indicates the the associated nodelist should be
+ * count goes to 0, this indicates that the associated nodelist should be
* freed. Returning 1 indicates the ndlp resource has been released; on the
* other hand, returning 0 indicates the ndlp resource has not been released
* yet.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index a5769a9960ac..ae2d01f7e67d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3903,7 +3903,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelevant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 1f292e29d566..d9a9ddbf1771 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2265,7 +2265,7 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * that the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 32ada0505576..a24a0b1e59d4 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -16748,7 +16748,7 @@ out:
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index dd12c6fe57a6..7508ee4810a8 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3212,7 +3212,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when HBA driver received the identify done event or initiate FIS received
* event(for SATA), it will invoke this function to notify the sas layer that
- * the sas toplogy has formed, please discover the the whole sas domain,
+ * the sas toplogy has formed, please discover the whole sas domain,
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 80b8408ac3e3..4cbdc43d509c 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -354,7 +354,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
{
/*
* On all 4xx PPC's the SPI bus is shared/multiplexed with
- * the 2nd I2C bus. We need to enable the the SPI bus before
+ * the 2nd I2C bus. We need to enable the SPI bus before
* using it.
*/
diff --git a/drivers/staging/android/ion/ion.c b/drivers/staging/android/ion/ion.c
index 270360912b2c..200ea0ccf7c4 100644
--- a/drivers/staging/android/ion/ion.c
+++ b/drivers/staging/android/ion/ion.c
@@ -901,7 +901,7 @@ void ion_pages_sync_for_device(struct device *dev, struct page *page,
sg_set_page(&sg, page, size, 0);
/*
* This is not correct - sg_dma_address needs a dma_addr_t that is valid
- * for the the targeted device, but this works on the currently targeted
+ * for the targeted device, but this works on the currently targeted
* hardware.
*/
sg_dma_address(&sg) = page_to_phys(page);
diff --git a/drivers/staging/android/uapi/binder.h b/drivers/staging/android/uapi/binder.h
index 904adb7600cf..1dd36442263e 100644
--- a/drivers/staging/android/uapi/binder.h
+++ b/drivers/staging/android/uapi/binder.h
@@ -265,7 +265,7 @@ enum binder_driver_return_protocol {
BR_FAILED_REPLY = _IO('r', 17),
/*
- * The the last transaction (either a bcTRANSACTION or
+ * The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
};
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 831b7c6fe494..3f1f28e2dce2 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -1234,7 +1234,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
/* Initialize the Space Available Register */
writel(0, &rxmac->space_avail);
- /* Initialize the the mif_ctrl register
+ /* Initialize the mif_ctrl register
* bit 3: Receive code error. One or more nibbles were signaled as
* errors during the reception of the packet. Clear this
* bit in Gigabit, set it in 100Mbit. This was derived
diff --git a/drivers/staging/lustre/lustre/llite/file.c b/drivers/staging/lustre/lustre/llite/file.c
index fd1b75a3a569..6c40b3665521 100644
--- a/drivers/staging/lustre/lustre/llite/file.c
+++ b/drivers/staging/lustre/lustre/llite/file.c
@@ -364,7 +364,7 @@ int ll_file_release(struct inode *inode, struct file *file)
fd = LUSTRE_FPRIVATE(file);
LASSERT(fd != NULL);
- /* The last ref on @file, maybe not the the owner pid of statahead.
+ /* The last ref on @file, maybe not the owner pid of statahead.
* Different processes can open the same dir, "ll_opendir_key" means:
* it is me that should stop the statahead thread. */
if (S_ISDIR(inode->i_mode) && lli->lli_opendir_key == fd &&
diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
index 5e4e49fab63c..815c5866cb4b 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
@@ -447,7 +447,7 @@ struct timeout_item* ptlrpc_new_timeout(int time, enum timeout_event event,
}
/**
- * Register timeout event on the the pinger thread.
+ * Register timeout event on the pinger thread.
* Note: the timeout list is an sorted list with increased timeout value.
*/
static struct timeout_item*
diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index 104b01fa0fad..803ddfb8d065 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -453,7 +453,7 @@ u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network *pnetwork)
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the connection. */
+ /* If the driver wants to use the bssid to create the connection. */
/* If not, we have to copy the connecting AP's MAC address to it so that */
/* the driver just has the bssid information for PMKIDList searching. */
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 73410ccfb1ec..ebefffd2e96a 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -920,7 +920,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
int i;
struct ieee80211_rxb *rxb = NULL;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.c b/drivers/staging/rtl8712/rtl871x_cmd.c
index d9c1561e3272..5aae4cce8477 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -527,7 +527,7 @@ u8 r8712_joinbss_cmd(struct _adapter *padapter, struct wlan_network *pnetwork)
memcpy(&psecuritypriv->authenticator_ie[1],
&psecnetwork->IEs[12], (256-1));
psecnetwork->IELength = 0;
- /* If the the driver wants to use the bssid to create the connection.
+ /* If the driver wants to use the bssid to create the connection.
* If not, we copy the connecting AP's MAC address to it so that
* the driver just has the bssid information for PMKIDList searching.
*/
diff --git a/drivers/staging/rtl8723au/core/rtw_cmd.c b/drivers/staging/rtl8723au/core/rtw_cmd.c
index 7241a5a8731c..611cd1f6c555 100644
--- a/drivers/staging/rtl8723au/core/rtw_cmd.c
+++ b/drivers/staging/rtl8723au/core/rtw_cmd.c
@@ -518,7 +518,7 @@ int rtw_joinbss_cmd23a(struct rtw_adapter *padapter,
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the
+ /* If the driver wants to use the bssid to create the
* connection. If not, we have to copy the connecting AP's
* MAC address to it so that the driver just has the bssid
* information for PMKIDList searching. */
diff --git a/drivers/staging/unisys/common-spar/include/channels/iochannel.h b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
index 24e11858e0ee..0fce4fd54ce9 100644
--- a/drivers/staging/unisys/common-spar/include/channels/iochannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
@@ -595,7 +595,7 @@ struct uiscmdrsp_scsitaskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
@@ -642,7 +642,7 @@ struct uiscmdrsp_vdiskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
diff --git a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
index 8facb51143ae..9dc629f36cc1 100644
--- a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
@@ -68,11 +68,11 @@ typedef struct _ULTRA_VBUS_HEADERINFO {
u32 devInfoCount; /* num of items in DevInfo member */
/* (this is the allocated size) */
u32 chpInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the ChpInfo struct (below) */
+ /* to the ChpInfo struct (below) */
u32 busInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the BusInfo struct (below) */
+ /* to the BusInfo struct (below) */
u32 devInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the DevInfo array (below) */
+ /* to the DevInfo array (below) */
u8 reserved[104];
} ULTRA_VBUS_HEADERINFO;
diff --git a/drivers/staging/unisys/virtpci/virtpci.c b/drivers/staging/unisys/virtpci/virtpci.c
index d9443a968ddf..97f3d823c688 100644
--- a/drivers/staging/unisys/virtpci/virtpci.c
+++ b/drivers/staging/unisys/virtpci/virtpci.c
@@ -745,7 +745,7 @@ static int virtpci_device_resume(struct device *dev)
/* For a child device just created on a client bus, fill in
* information about the driver that is controlling this device into
- * the the appropriate slot within the vbus channel of the bus
+ * the appropriate slot within the vbus channel of the bus
* instance.
*/
static void fix_vbus_devInfo(struct device *dev, int devNo, int devType,
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index fbc5ebb5f761..d06dd9316716 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -410,8 +410,8 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
} else {
/*
- * Extract the RELATIVE TARGET PORT IDENTIFIER to identify
- * the Target Port in question for the the incoming
+ * Extact the RELATIVE TARGET PORT IDENTIFIER to identify
+ * the Target Port in question for the incoming
* SET_TARGET_PORT_GROUPS op.
*/
rtpi = get_unaligned_be16(ptr + 2);
diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h
index ba87d6e731dd..1a4ba247f160 100644
--- a/drivers/thunderbolt/ctl.h
+++ b/drivers/thunderbolt/ctl.h
@@ -44,7 +44,7 @@ struct tb_cfg_result {
* If err = 1 then this is the port that send the
* error.
* If err = 0 and if this was a cfg_read/write then
- * this is the the upstream port of the responding
+ * this is the upstream port of the responding
* switch.
* Otherwise the field is set to zero.
*/
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 6234c75da33f..50294f31f227 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -313,8 +313,7 @@ static const int hrsl_to_error[] = {
/*
* See http://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a
- * reasonable overview of how control transfers use the the IN/OUT
- * tokens.
+ * reasonable overview of how control transfers use the IN/OUT tokens.
*/
#define MAX3421_HXFR_BULK_IN(ep) (0x00 | (ep)) /* bulk or interrupt */
#define MAX3421_HXFR_SETUP 0x10
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index abed30b82905..54674c03d22b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1652,7 +1652,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
- * RExit to a disconnect state). If so, let the the driver know it's
+ * RExit to a disconnect state). If so, let the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED(temp) &&
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 01bf53392819..1b99a08ca2de 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -261,7 +261,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
* Cypress app note that describes this mechanism
- * states the the low-speed part can't handle more
+ * states that the low-speed part can't handle more
* than 800 bytes/sec, in which case 4800 baud is the
* safest speed for a part like that.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index dfd728a263d2..71636a617d89 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -429,7 +429,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
}
/*
- * This is the the common top part of all parallel port callback operations that
+ * This is the common top part of all parallel port callback operations that
* send synchronous messages to the device. This implements convoluted locking
* that avoids two scenarios: (1) a port operation is called after usbserial
* has called our release function, at which point struct mos7715_parport has
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 0677139c6065..d435940d5598 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -46,7 +46,7 @@
*
* ASSUMPTIONS:
*
- * - We use the the as device address the port number where it is
+ * - We use as device address the port number where it is
* connected (port 0 doesn't exist). For unauth, it is 128 + that.
*
* ROADMAP:
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
index b7d4f6b75eef..caa4cb40334d 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/uwb/drp-ie.c
@@ -262,7 +262,7 @@ int uwb_drp_ie_update(struct uwb_rsv *rsv)
* We are given a zone id and the MAS bitmap of bits that need to be set in
* this zone. Note that this zone may already have bits set and this only
* adds settings - we cannot simply assign the MAS bitmap contents to the
- * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * zone contents. We iterate over the bits (MAS) in the zone and set the
* bits that are set in the given MAS bitmap.
*/
static
diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
index d4e7684e7045..501bc08dc125 100644
--- a/drivers/video/fbdev/omap/sossi.c
+++ b/drivers/video/fbdev/omap/sossi.c
@@ -370,7 +370,7 @@ static void sossi_set_bits_per_cycle(int bpc)
int bus_pick_count, bus_pick_width;
/*
- * We set explicitly the the bus_pick_count as well, although
+ * We set explicitly the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
diff --git a/drivers/video/fbdev/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c
index ceb434c95c0d..9177b8056356 100644
--- a/drivers/video/fbdev/sis/sis_accel.c
+++ b/drivers/video/fbdev/sis/sis_accel.c
@@ -215,7 +215,7 @@ SiS310SubsequentScreenToScreenCopy(struct sis_video_info *ivideo, int src_x, int
* and destination blitting areas overlap and
* adapt the bitmap addresses synchronously
* if the coordinates exceed the valid range.
- * The the areas do not overlap, we do our
+ * If the areas do not overlap, we do our
* normal check.
*/
if((mymax - mymin) < height) {
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 5b570b6efa28..ecbd6b7b6c9a 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -507,7 +507,7 @@ static int autofs_dev_ioctl_askumount(struct file *fp,
* located path is the root of a mount we return 1 along with
* the super magic of the mount or 0 otherwise.
*
- * In both cases the the device number (as returned by
+ * In both cases the device number (as returned by
* new_encode_dev()) is also returned.
*/
static int autofs_dev_ioctl_ismountpoint(struct file *fp,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index eea26e1b2fda..8ae32564e6d7 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -849,7 +849,7 @@ int btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace)
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
- * not called and the the filesystem is remounted
+ * not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancelation is wanted.
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index 6528aa662181..6c5ce8e50f32 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -3402,7 +3402,7 @@ verbose_printk("btrfs: process_recorded_refs %llu\n", sctx->cur_ino);
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
- * the the current inum. To handle this case, we create the
+ * than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 1d1ba083ca6e..3d5b414003b3 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2654,7 +2654,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
mutex_unlock(&log_root_tree->log_mutex);
/*
- * nobody else is going to jump in and write the the ctree
+ * nobody else is going to jump in and write the ctree
* super here because the log_commit atomic below is protecting
* us. We must be called with a transaction handle pinning
* the running transaction open, so a full commit can't hop
diff --git a/fs/dcache.c b/fs/dcache.c
index cb25a1a5e307..4a327e47b6b0 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1885,8 +1885,8 @@ EXPORT_SYMBOL(d_obtain_root);
* same inode, only the actual correct case is stored in the dcache for
* case-insensitive filesystems.
*
- * For a case-insensitive lookup match and if the the case-exact dentry
- * already exists in in the dcache, use it and return it.
+ * For a case-insensitive lookup match and if the case-exact dentry
+ * already exists in the dcache, use it and return it.
*
* If no entry exists with the exact case name, allocate new dentry with
* the exact case, and return the spliced entry.
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 4725a07f003c..bcdfbc7568d7 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -900,7 +900,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack {
* @filename: This function kmalloc's the memory for the filename
* @filename_size: This function sets this to the amount of memory
* kmalloc'd for the filename
- * @packet_size: This function sets this to the the number of octets
+ * @packet_size: This function sets this to the number of octets
* in the packet parsed
* @mount_crypt_stat: The mount-wide cryptographic context
* @data: The memory location containing the start of the tag 70
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index d9a17d0b124d..c9c6f2e5a0a0 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -51,7 +51,7 @@ struct ext2_block_alloc_info {
/*
* Was i_next_alloc_goal in ext2_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it is the physical block number of the block which was most-recently
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index bea662bd0ca6..3b94971b7b9b 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -271,7 +271,7 @@ static int ext4_create_inline_data(handle_t *handle,
len = 0;
}
- /* Insert the the xttr entry. */
+ /* Insert the xttr entry. */
i.value = value;
i.value_len = len;
@@ -829,7 +829,7 @@ out:
/*
* Prepare the write for the inline data.
- * If the the data can be written into the inode, we just read
+ * If the data can be written into the inode, we just read
* the page and make it uptodate, and start the journal.
* Otherwise read the page, makes it dirty so that it can be
* handle in writepages(the i_disksize update is left to the
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index ff483257283b..5b3f3135fb0a 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -150,7 +150,7 @@ struct seg_entry {
unsigned short valid_blocks; /* # of valid blocks */
unsigned char *cur_valid_map; /* validity bitmap of blocks */
/*
- * # of valid blocks and the validity bitmap stored in the the last
+ * # of valid blocks and the validity bitmap stored in the last
* checkpoint pack. This information is used by the SSR mode.
*/
unsigned short ckpt_valid_blocks;
diff --git a/fs/kernfs/file.c b/fs/kernfs/file.c
index 4429d6d9217f..2d4e4ef09b73 100644
--- a/fs/kernfs/file.c
+++ b/fs/kernfs/file.c
@@ -259,7 +259,7 @@ static ssize_t kernfs_fop_read(struct file *file, char __user *user_buf,
* There is no easy way for us to know if userspace is only doing a partial
* write, so we don't support them. We expect the entire buffer to come on
* the first write. Hint: if you're writing a value, first read the file,
- * modify only the the value you're changing, then write entire buffer
+ * modify only the value you're changing, then write entire buffer
* back.
*/
static ssize_t kernfs_fop_write(struct file *file, const char __user *user_buf,
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 044013455621..c0aa12bdb106 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -690,7 +690,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb,
/*
* Under certain conditions, the window slide code
* might have reduced the number of bits available or
- * disabled the the local alloc entirely. Re-check
+ * disabled the local alloc entirely. Re-check
* here and return -ENOSPC if necessary.
*/
status = -ENOSPC;
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index 5a6bd5d8779a..85438d16e633 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -71,7 +71,7 @@ xfs_fs_encode_fh(
fileid_type = FILEID_INO32_GEN_PARENT;
/*
- * If the the filesystem may contain 64bit inode numbers, we need
+ * If the filesystem may contain 64bit inode numbers, we need
* to use larger file handles that can represent them.
*
* While we only allocate inodes that do not fit into 32 bits any
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index 26bb55e9e8b6..37cdb83e1e24 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -120,7 +120,7 @@ static inline int drm_rect_height(const struct drm_rect *r)
}
/**
- * drm_rect_visible - determine if the the rectangle is visible
+ * drm_rect_visible - determine if the rectangle is visible
* @r: rectangle whose visibility is returned
*
* RETURNS:
diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h
index d5b5f76d57ef..91c32b80c6d1 100644
--- a/include/linux/mic_bus.h
+++ b/include/linux/mic_bus.h
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ include/linux/virtio.h.
*/
#ifndef _MIC_BUS_H_
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 8981cc882ed2..0b3da6784a66 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -196,7 +196,7 @@ extern pgprot_t protection_map[16];
#define FAULT_FLAG_USER 0x80 /* The fault originated in userspace */
/*
- * vm_fault is filled by the the pagefault handler and passed to the vma's
+ * vm_fault is filled by the pagefault handler and passed to the vma's
* ->fault function. The vma's ->fault is responsible for returning a bitmask
* of VM_FAULT_xxx flags that give details about how the fault was handled.
*
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 494f99e852da..f9f20ca81f51 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -94,7 +94,7 @@ struct kparam_array
* ".") the kernel commandline parameter. Note that - is changed to _, so
* the user can use "foo-bar=1" even for variable "foo_bar".
*
- * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * @perm is 0 if the variable is not to appear in sysfs, or 0444
* for world-readable, 0644 for root-writable, etc. Note that if it
* is writable, you may need to use kparam_block_sysfs_write() around
* accesses (esp. charp, which can be kfreed when it changes).
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index abde271c18ae..51301dc8c0c5 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2697,7 +2697,7 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
* must call this function to return the skb back to the stack, with
* or without a timestamp.
*
- * @skb: clone of the the original outgoing packet
+ * @skb: clone of the original outgoing packet
* @hwtstamps: hardware time stamps, may be NULL if not available
*
*/
diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h
index 94e5ed64dc6d..e9a8d524ab06 100644
--- a/include/net/caif/caif_layer.h
+++ b/include/net/caif/caif_layer.h
@@ -184,7 +184,7 @@ struct cflayer {
* CAIF packet downwards in the stack.
* Packet handling rules:
* - The CAIF packet (cfpkt) ownership is passed to the
- * transmit function. This means that the the packet
+ * transmit function. This means that the packet
* cannot be accessed after passing it to the below
* layer using dn->transmit().
*
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 9bcb220bd4ad..f422729b30c3 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -100,7 +100,7 @@ struct rt6_info {
struct in6_addr rt6i_gateway;
/* Multipath routes:
- * siblings is a list of rt6_info that have the the same metric/weight,
+ * siblings is a list of rt6_info that have the same metric/weight,
* destination, but not the same gateway. nsiblings is just a cache
* to speed up lookup.
*/
diff --git a/include/net/wimax.h b/include/net/wimax.h
index c52b68577cb0..c9705a3eb3b7 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -43,7 +43,7 @@
*
* USAGE
*
- * Embed a `struct wimax_dev` at the beginning of the the device's
+ * Embed a `struct wimax_dev` at the beginning of the device's
* private structure, initialize and register it. For details, see
* `struct wimax_dev`s documentation.
*
diff --git a/include/uapi/asm-generic/fcntl.h b/include/uapi/asm-generic/fcntl.h
index 7543b3e51331..3c8f396825b8 100644
--- a/include/uapi/asm-generic/fcntl.h
+++ b/include/uapi/asm-generic/fcntl.h
@@ -142,7 +142,7 @@
* record locks, but are "owned" by the open file description, not the
* process. This means that they are inherited across fork() like BSD (flock)
* locks, and they are only released automatically when the last reference to
- * the the open file against which they were acquired is put.
+ * the open file against which they were acquired is put.
*/
#define F_OFD_GETLK 36
#define F_OFD_SETLK 37
diff --git a/init/Kconfig b/init/Kconfig
index e84c6423a2e5..19e94edc0ac8 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -848,8 +848,8 @@ config LOG_CPU_MAX_BUF_SHIFT
used as it forces an exact (power of two) size of the ring buffer.
The number of possible CPUs is used for this computation ignoring
- hotplugging making the compuation optimal for the the worst case
- scenerio while allowing a simple algorithm to be used from bootup.
+ hotplugging making the computation optimal for the worst case
+ scenario while allowing a simple algorithm to be used from bootup.
Examples shift values and their meaning:
17 => 128 KB for each CPU
diff --git a/init/main.c b/init/main.c
index bb1aed928f21..ceb26e85e416 100644
--- a/init/main.c
+++ b/init/main.c
@@ -512,7 +512,7 @@ asmlinkage __visible void __init start_kernel(void)
debug_objects_early_init();
/*
- * Set up the the initial canary ASAP:
+ * Set up the initial canary ASAP:
*/
boot_init_stack_canary();
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 9019f15deab2..6e82ca9e2735 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -17,7 +17,7 @@
#ifdef HAVE_JUMP_LABEL
-/* mutex to protect coming/going of the the jump_label table */
+/* mutex to protect coming/going of the jump_label table */
static DEFINE_MUTEX(jump_label_mutex);
void jump_label_lock(void)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 1ce770687ea8..8cd9ce2a6bcc 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2878,7 +2878,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
- * with as many of the the *youngest* kmsg records that fit into it.
+ * with as many of the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
diff --git a/kernel/smp.c b/kernel/smp.c
index aff8aa14f547..c6174667d632 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -622,7 +622,7 @@ EXPORT_SYMBOL(on_each_cpu_mask);
* for all the required CPUs to finish. This may include the local
* processor.
* @cond_func: A callback function that is passed a cpu id and
- * the the info parameter. The function is called
+ * the info parameter. The function is called
* with preemption disabled. The function should
* return a blooean value indicating whether to IPI
* the specified CPU.
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index b38fb2b9e237..612b68cd4599 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2881,7 +2881,7 @@ rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
* This function lets the user discard an event in the ring buffer
* and then that event will not be read later.
*
- * This function only works if it is called before the the item has been
+ * This function only works if it is called before the item has been
* committed. It will try to free the event from the ring buffer
* if another event has not been added behind it.
*
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 1e031f2c9aba..6a76a7f29c3f 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -884,7 +884,7 @@ EXPORT_SYMBOL(bitmap_bitremap);
* read it, you're overqualified for your current job.)
*
* In other words, @orig is mapped onto (surjectively) @dst,
- * using the the map { <n, m> | the n-th bit of @relmap is the
+ * using the map { <n, m> | the n-th bit of @relmap is the
* m-th set bit of @relmap }.
*
* Any set bits in @orig above bit number W, where W is the
diff --git a/lib/dynamic_queue_limits.c b/lib/dynamic_queue_limits.c
index 0777c5a45fa0..2ad6fc394f07 100644
--- a/lib/dynamic_queue_limits.c
+++ b/lib/dynamic_queue_limits.c
@@ -60,7 +60,7 @@ void dql_completed(struct dql *dql, unsigned int count)
* the whole interval (the check above).
*
* If there is slack, the amount of execess data queued above
- * the the amount needed to prevent starvation, the queue limit
+ * the amount needed to prevent starvation, the queue limit
* can be decreased. To avoid hysteresis we consider the
* minimum amount of slack found over several iterations of the
* completion routine.
diff --git a/lib/earlycpio.c b/lib/earlycpio.c
index 3eb3e4722b8e..9d4da0a6a6ed 100644
--- a/lib/earlycpio.c
+++ b/lib/earlycpio.c
@@ -50,7 +50,7 @@ enum cpio_fields {
/**
* cpio_data find_cpio_data - Search for files in an uncompressed cpio
* @path: The directory to search for, including a slash at the end
- * @data: Pointer to the the cpio archive or a header inside
+ * @data: Pointer to the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @nextoff: When a matching file is found, this is the offset from the
* beginning of the cpio to the beginning of the next file, not the
diff --git a/lib/syscall.c b/lib/syscall.c
index e30e03932480..624d80430969 100644
--- a/lib/syscall.c
+++ b/lib/syscall.c
@@ -31,7 +31,7 @@ static int collect_syscall(struct task_struct *target, long *callno,
* @pc: filled with user PC
*
* If @target is blocked in a system call, returns zero with *@callno
- * set to the the call's number and @args filled in with its arguments.
+ * set to the call's number and @args filled in with its arguments.
* Registers not used for system call arguments may not be available and
* it is not kosher to use &struct user_regset calls while the system
* call is still in progress. Note we may get this result if @target
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index eeceeeb09019..fdd76586e1a4 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1308,7 +1308,7 @@ static void return_unused_surplus_pages(struct hstate *h,
* evenly across all nodes with memory. Iterate across these nodes
* until we can no longer free unreserved surplus pages. This occurs
* when the nodes with surplus pages have no free pages.
- * free_pool_huge_page() will balance the the freed pages across the
+ * free_pool_huge_page() will balance the freed pages across the
* on-line nodes with memory and will handle the hstate accounting.
*/
while (nr_pages--) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 18cee0d4c8a2..c9c9b33608f3 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4222,7 +4222,7 @@ static int zone_batchsize(struct zone *zone)
* locking.
*
* Any new users of pcp->batch and pcp->high should ensure they can cope with
- * those fields changing asynchronously (acording the the above rule).
+ * those fields changing asynchronously (according to the above rule).
*
* mutex_is_locked(&pcp_batch_high_lock) required when calling this function
* outside of boot time (or some other assurance that no concurrent updaters
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index faff6247ac8f..9f4c71ba8dd1 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -966,7 +966,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
return 0;
}
-/* Encrypt the the link */
+/* Encrypt the link */
static void hci_conn_encrypt(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 1d9c29a00568..5b2b17522561 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1674,7 +1674,7 @@ static void hci_init3_req(struct hci_request *req, unsigned long opt)
* Delete Stored Link Key command. They are clearly indicating its
* absence in the bit mask of supported commands.
*
- * Check the supported commands and only if the the command is marked
+ * Check the supported commands and only if the command is marked
* as supported send it. If not supported assume that the controller
* does not have actual support for stored link keys which makes this
* command redundant anyway.
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index a88b8524846e..9d83a2e05baf 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1349,7 +1349,7 @@ static void sctp_select_active_and_retran_path(struct sctp_association *asoc)
}
/* We did not find anything useful for a possible retransmission
- * path; either primary path that we found is the the same as
+ * path; either primary path that we found is the same as
* the current one, or we didn't generally find an active one.
*/
if (trans_sec == NULL)
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index 158701da2d31..c13e0636ea44 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -199,8 +199,8 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3;
max = asoc->frag_point;
- /* If the the peer requested that we authenticate DATA chunks
- * we need to account for bundling of the AUTH chunks along with
+ /* If the peer requested that we authenticate DATA chunks
+ * we need to accound for bundling of the AUTH chunks along with
* DATA.
*/
if (sctp_auth_send_cid(SCTP_CID_DATA, asoc)) {
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 6f6b829c9e8e..1ef370a9f675 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -190,7 +190,7 @@ void rpc_destroy_generic_auth(void)
}
/*
- * Test the the current time (now) against the underlying credential key expiry
+ * Test the current time (now) against the underlying credential key expiry
* minus a timeout and setup notification.
*
* The normal case:
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 403078d670a9..b21863009913 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
* @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
* %WIMAX_RF_OFF radio off.
*
- * Reports changes in the software RF switch state to the the WiMAX
+ * Reports changes in the software RF switch state to the WiMAX
* stack.
*
* The main use is during initialization, so the driver can query the
diff --git a/scripts/coccinelle/misc/badty.cocci b/scripts/coccinelle/misc/badty.cocci
index 2fc06fc71927..7bde383f577b 100644
--- a/scripts/coccinelle/misc/badty.cocci
+++ b/scripts/coccinelle/misc/badty.cocci
@@ -3,7 +3,7 @@
//# This makes an effort to find cases where the argument to sizeof is wrong
//# in memory allocation functions by checking the type of the allocated memory
//# when it is a double pointer and ensuring the sizeof argument takes a pointer
-//# to the the memory being allocated. There are false positives in cases the
+//# to the memory being allocated. There are false positives in cases the
//# sizeof argument is not used in constructing the return value. The result
//# may need some reformatting.
//
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index db40fa04cd51..9eb8c74b69a1 100644
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in
kernel/trace/trace_functions.c
The resulted trace is processed into a tree to produce a more human
view of the call stack by drawing textual but hierarchical tree of
-calls. Only the functions's names and the the call time are provided.
+calls. Only the functions's names and the call time are provided.
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
index 3064c6ced87c..7b9769e7985a 100644
--- a/security/apparmor/context.c
+++ b/security/apparmor/context.c
@@ -13,7 +13,7 @@
* License.
*
*
- * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * AppArmor sets confinement on every task, via the aa_task_cxt and
* the aa_task_cxt.profile, both of which are required and are not allowed
* to be NULL. The aa_task_cxt is not reference counted and is unique
* to each cred (which is reference count). The profile pointed to by
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index e26f860e5f2e..112d40974504 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -474,7 +474,7 @@ error:
* keyring, otherwise replace the link to the matching key with a link to the
* new key.
*
- * The key must grant the caller Link permission and the the keyring must grant
+ * The key must grant the caller Link permission and the keyring must grant
* the caller Write permission. Furthermore, if an additional link is created,
* the keyring's quota will be extended.
*
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index ec6a7d0d1886..e3ecc7538f8e 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -5110,7 +5110,7 @@ EXPORT_SYMBOL_GPL(snd_hda_power_save);
* @nid: NID to check / update
*
* Check whether the given NID is in the amp list. If it's in the list,
- * check the current AMP status, and update the the power-status according
+ * check the current AMP status, and update the power-status according
* to the mute status.
*
* This function is supposed to be set or called from the check_power_status
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 98cd1908c039..f193b73de0f2 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -887,7 +887,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec,
static struct snd_kcontrol_new beep_vol_ctl =
HDA_CODEC_VOLUME(NULL, 0, 0, 0);
- /* check for mute support for the the amp */
+ /* check for mute support for the amp */
if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
const struct snd_kcontrol_new *temp;
if (spec->anabeep_nid == nid)
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index f3b491aa3e22..df5cb3b4b6e2 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -31,7 +31,7 @@
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
- * sampling rate. That means the the FPGA doubles the
+ * sampling rate. That means that the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index bddee30a4bc7..eaac777ee91d 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -694,7 +694,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int source)
u64 Kpart;
unsigned int K, Ndiv, Nmod, target;
- /* The the PLL output is always 98.304MHz. */
+ /* The PLL output is always 98.304MHz. */
target = 98304000;
/* If the input frequency is over 14.4MHz then scale it down. */
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index a609aafc994d..3c1c7b71e69b 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -164,7 +164,7 @@ static void fsl_dma_abort_stream(struct snd_pcm_substream *substream)
/**
* fsl_dma_update_pointers - update LD pointers to point to the next period
*
- * As each period is completed, this function changes the the link
+ * As each period is completed, this function changes the link
* descriptor pointers for that period to point to the next period.
*/
static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private)
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index b2c3d0d5dca3..8dc8cc9b8348 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -615,7 +615,7 @@ A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. The DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index b3b8abae62b8..6acad619044b 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -196,7 +196,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
- period being the hist entry period value
- - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option
+ - WEIGHT-A/WEIGHT-B being user suplied weights in the '-c' option
behind ':' separator like '-c wdiff:1,2'.
- WIEGHT-A being the weight of the data file
- WIEGHT-B being the weight of the baseline data file
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index 56bfb523c5bb..6940d8849434 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -35,9 +35,9 @@ The \fB-c MSR#\fP option includes the delta of the specified 32-bit MSR counter.
.PP
The \fB-C MSR#\fP option includes the delta of the specified 64-bit MSR counter.
.PP
-The \fB-m MSR#\fP option includes the the specified 32-bit MSR value.
+The \fB-m MSR#\fP option includes the specified 32-bit MSR value.
.PP
-The \fB-M MSR#\fP option includes the the specified 64-bit MSR value.
+The \fB-M MSR#\fP option includes the specified 64-bit MSR value.
.PP
The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
The default is 5 seconds.
diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
index fd7e9e9d6f4a..1aa7faa0e0e0 100644
--- a/tools/thermal/tmon/pid.c
+++ b/tools/thermal/tmon/pid.c
@@ -38,7 +38,7 @@
/**************************************************************************
* PID (Proportional-Integral-Derivative) controller is commonly used in
- * linear control system, consider the the process.
+ * linear control system, consider the process.
* G(s) = U(s)/E(s)
* kp = proportional gain
* ki = integral gain
--
1.9.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-01 19:54 ` Michael Opdenacker
@ 2014-10-02 17:25 ` Randy Dunlap
2014-10-02 19:18 ` Michael Opdenacker
0 siblings, 1 reply; 35+ messages in thread
From: Randy Dunlap @ 2014-10-02 17:25 UTC (permalink / raw)
To: Michael Opdenacker, trivial, joe, akpm, arend, gregkh; +Cc: linux-kernel
Here are a few corrections for you.
On 10/01/14 12:54, Michael Opdenacker wrote:
> Fix all occurrences of "the the " in the source code,
> comments and documentation.
>
and occasionally "in in "
> The replacement couldn't be automated because sometimes
> the first "the" was meant to be another word.
>
> Example: "according the the"
> meaning: "according to the"
>
> Note that I sometimes took the opportunity to fix
> other spelling issues or typos in the same sentences.
> I also fixed a few checkpatch errors in the same
> lines, but not all of them (should be addressed by
> separate patches).
including reformatting of some comments.
> Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
> ---
> 225 files changed, 263 insertions(+), 263 deletions(-)
> diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
> index 82bbfa5a05b3..5f2cdfe6f0c2 100644
> --- a/arch/xtensa/kernel/entry.S
> +++ b/arch/xtensa/kernel/entry.S
> @@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
> * of the proper size instead.
> *
> * This algorithm simply backs out the register changes started by the user
> - * excpetion handler, makes it appear that we have started a window underflow
> + * exception handler, makes it appear that we have started a window underflow
> * by rotating the window back and then setting the old window base (OWB) in
> * the 'ps' register with the rolled back window base. The 'movsp' instruction
> * will be re-executed and this time since the next window frames is in the
> * active AR registers it won't cause an exception.
> *
> * If the WindowUnderflow code gets a TLB miss the page will get mapped
> - * the the partial windeowUnderflow will be handeled in the double exception
> + * and the partial windeowUnderflow will be handeled in the double exception
handled
> * handler.
> *
> * Entry condition:
> diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
> index a1f1127d7808..f3aa063dee4b 100644
> --- a/drivers/net/wireless/ath/wcn36xx/hal.h
> +++ b/drivers/net/wireless/ath/wcn36xx/hal.h
> @@ -1609,7 +1609,7 @@ struct wcn36xx_hal_config_bss_params {
>
> /* HAL should update the existing BSS entry, if this flag is set.
> * UMAC will set this flag in case of reassoc, where we want to
> - * resue the the old BSSID and still return success 0 = Add, 1 =
> + * reuse the old BSSID and still return success 0 = Add, 1 =
> * Update */
> u8 action;
>
> @@ -1746,7 +1746,7 @@ struct wcn36xx_hal_config_bss_params_v1 {
>
> /* HAL should update the existing BSS entry, if this flag is set.
> * UMAC will set this flag in case of reassoc, where we want to
> - * resue the the old BSSID and still return success 0 = Add, 1 =
> + * reuse the old BSSID and still return success 0 = Add, 1 =
> * Update */
> u8 action;
>
> @@ -3739,7 +3739,7 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
> /* Length of the responce message */
> u32 rsp_length;
>
> - /* FIXME: Currently considering the the responce will be less than
> + /* FIXME: Currently considering that the responce will be less than
response
> * 100bytes */
> u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
> } __packed;
> diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
> index fbc5ebb5f761..d06dd9316716 100644
> --- a/drivers/target/target_core_alua.c
> +++ b/drivers/target/target_core_alua.c
> @@ -410,8 +410,8 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
> spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
> } else {
> /*
> - * Extract the RELATIVE TARGET PORT IDENTIFIER to identify
> - * the Target Port in question for the the incoming
> + * Extact the RELATIVE TARGET PORT IDENTIFIER to identify
Extract
> + * the Target Port in question for the incoming
> * SET_TARGET_PORT_GROUPS op.
> */
> rtpi = get_unaligned_be16(ptr + 2);
> diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
> index 158701da2d31..c13e0636ea44 100644
> --- a/net/sctp/chunk.c
> +++ b/net/sctp/chunk.c
> @@ -199,8 +199,8 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
> sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3;
>
> max = asoc->frag_point;
> - /* If the the peer requested that we authenticate DATA chunks
> - * we need to account for bundling of the AUTH chunks along with
> + /* If the peer requested that we authenticate DATA chunks
> + * we need to accound for bundling of the AUTH chunks along with
account (original was correct)
> * DATA.
> */
> if (sctp_auth_send_cid(SCTP_CID_DATA, asoc)) {
--
~Randy
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-02 17:25 ` Randy Dunlap
@ 2014-10-02 19:18 ` Michael Opdenacker
2014-10-02 19:24 ` Michael Opdenacker
2014-10-02 20:07 ` Michael Opdenacker
0 siblings, 2 replies; 35+ messages in thread
From: Michael Opdenacker @ 2014-10-02 19:18 UTC (permalink / raw)
To: Randy Dunlap, trivial, joe, akpm, arend, gregkh; +Cc: linux-kernel
Hi Randy,
Many thanks for taking the time to review this big patch!
On 10/02/2014 07:25 PM, Randy Dunlap wrote:
> Here are a few corrections for you.
I've taken your comments into account and will send an update soon.
Cheers,
Michael.
--
Michael Opdenacker, CEO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
+33 484 258 098
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-02 19:18 ` Michael Opdenacker
@ 2014-10-02 19:24 ` Michael Opdenacker
2014-10-02 20:00 ` Randy Dunlap
2014-10-02 20:07 ` Michael Opdenacker
1 sibling, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2014-10-02 19:24 UTC (permalink / raw)
To: rdunlap, trivial, joe, akpm, arend, gregkh
Cc: linux-kernel, Michael Opdenacker
Fix all occurrences of "the the ", and occasionally "in in ",
in the source code, comments and documentation.
The replacement couldn't be automated because sometimes
the first "the" was meant to be another word.
Example: "according the the"
meaning: "according to the"
Note that I sometimes took the opportunity to fix
other spelling issues or typos in the same sentences,
and to reformat some comments impacted by the changes.
I also fixed a few checkpatch errors in the same
lines, but not all of them (should be addressed by
separate patches).
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Reviewed-by: rdunlap@infradead.org
---
Documentation/ABI/testing/sysfs-devices-memory | 2 +-
Documentation/DocBook/media/v4l/controls.xml | 2 +-
Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
Documentation/devicetree/bindings/arm/msm/timer.txt | 2 +-
.../devicetree/bindings/ata/cavium-compact-flash.txt | 2 +-
Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt | 2 +-
Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt | 2 +-
Documentation/devicetree/bindings/mtd/fsmc-nand.txt | 2 +-
.../devicetree/bindings/net/broadcom-systemport.txt | 2 +-
Documentation/filesystems/autofs4-mount-control.txt | 4 ++--
Documentation/phy.txt | 2 +-
Documentation/vm/unevictable-lru.txt | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/unwind.h | 2 +-
arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
arch/arm/mach-pxa/stargate2.c | 2 +-
arch/arm64/crypto/aes-neon.S | 2 +-
arch/blackfin/mach-common/entry.S | 2 +-
arch/c6x/platforms/cache.c | 2 +-
arch/ia64/include/asm/spinlock.h | 2 +-
arch/ia64/include/asm/uv/uv_hub.h | 2 +-
arch/m68k/platform/coldfire/intc-2.c | 2 +-
arch/metag/kernel/process.c | 2 +-
arch/microblaze/kernel/entry.S | 2 +-
arch/mips/alchemy/devboards/pm.c | 2 +-
arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
arch/mips/include/asm/spinlock.h | 2 +-
arch/mips/kvm/mips.c | 2 +-
arch/mips/mm/c-octeon.c | 4 ++--
arch/mips/netlogic/xlr/fmn.c | 2 +-
arch/powerpc/include/asm/cache.h | 2 +-
arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
arch/powerpc/kernel/head_64.S | 2 +-
arch/powerpc/mm/gup.c | 2 +-
arch/powerpc/mm/hugetlbpage.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/platforms/chrp/setup.c | 2 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
arch/s390/kernel/perf_cpum_sf.c | 2 +-
arch/s390/mm/gup.c | 2 +-
arch/sparc/kernel/pci.c | 2 +-
arch/sparc/mm/gup.c | 2 +-
arch/tile/include/asm/irqflags.h | 2 +-
arch/tile/include/gxio/trio.h | 2 +-
arch/tile/kernel/single_step.c | 2 +-
arch/x86/include/asm/spinlock.h | 2 +-
arch/x86/include/asm/uv/uv_hub.h | 2 +-
arch/x86/kvm/x86.c | 2 +-
arch/x86/mm/gup.c | 4 ++--
arch/x86/xen/setup.c | 2 +-
arch/xtensa/include/asm/initialize_mmu.h | 2 +-
arch/xtensa/kernel/entry.S | 12 ++++++------
crypto/asymmetric_keys/pkcs7_parser.h | 2 +-
drivers/acpi/acpica/accommon.h | 2 +-
drivers/acpi/acpica/tbfadt.c | 2 +-
drivers/char/apm-emulation.c | 2 +-
drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
drivers/cpuidle/driver.c | 2 +-
drivers/crypto/picoxcell_crypto.c | 2 +-
drivers/crypto/ux500/hash/hash_core.c | 2 +-
drivers/gpio/gpio-ich.c | 2 +-
drivers/gpio/gpio-sch.c | 4 ++--
drivers/gpu/drm/drm_mm.c | 4 ++--
drivers/gpu/drm/i915/i915_gem.c | 2 +-
drivers/gpu/drm/i915/i915_gem_userptr.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 4 ++--
drivers/gpu/drm/radeon/atombios.h | 4 ++--
drivers/gpu/drm/radeon/r300_reg.h | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 2 +-
drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
drivers/gpu/drm/radeon/radeon_vm.c | 4 ++--
drivers/hv/channel.c | 4 ++--
drivers/hv/vmbus_drv.c | 4 ++--
drivers/hwmon/pmbus/ucd9200.c | 2 +-
drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
drivers/infiniband/hw/qib/qib.h | 2 +-
drivers/input/mouse/gpio_mouse.c | 2 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
drivers/lguest/core.c | 2 +-
drivers/media/dvb-frontends/tda1002x.h | 2 +-
drivers/media/dvb-frontends/tda10048.c | 2 +-
drivers/media/pci/cx88/cx88-dsp.c | 2 +-
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/saa7164/saa7164-core.c | 2 +-
drivers/media/platform/davinci/vpbe.c | 2 +-
drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
drivers/media/usb/dvb-usb/friio.c | 2 +-
drivers/media/usb/dvb-usb/friio.h | 2 +-
drivers/media/usb/gspca/finepix.c | 2 +-
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 2 +-
drivers/memory/emif.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/mfd/db8500-prcmu.c | 2 +-
drivers/misc/mic/bus/mic_bus.c | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/ubi/ubi.h | 4 ++--
drivers/mtd/ubi/wl.c | 2 +-
drivers/net/can/xilinx_can.c | 2 +-
drivers/net/ethernet/calxeda/xgmac.c | 2 +-
drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
drivers/net/wimax/i2400m/i2400m.h | 4 ++--
drivers/net/wimax/i2400m/rx.c | 2 +-
drivers/net/wimax/i2400m/tx.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/wcn36xx/hal.h | 8 ++++----
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++--
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 ++--
drivers/net/wireless/mwifiex/debugfs.c | 2 +-
drivers/net/wireless/rsi/rsi_91x_sdio.c | 4 ++--
drivers/net/wireless/ti/wl1251/acx.h | 2 +-
drivers/of/base.c | 2 +-
drivers/pci/hotplug/acpiphp_glue.c | 2 +-
drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 2 +-
drivers/pinctrl/pinctrl-at91.c | 2 +-
drivers/power/power_supply_sysfs.c | 5 +++--
drivers/rtc/rtc-rs5c372.c | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 6 +++---
drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++--
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/remote_device.h | 2 +-
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/spi/spi-ppc4xx.c | 2 +-
drivers/staging/android/ion/ion.c | 2 +-
drivers/staging/android/uapi/binder.h | 2 +-
drivers/staging/et131x/et131x.c | 2 +-
drivers/staging/lustre/lustre/llite/file.c | 2 +-
drivers/staging/lustre/lustre/ptlrpc/pinger.c | 2 +-
drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/rtl8712/rtl871x_cmd.c | 2 +-
drivers/staging/rtl8723au/core/rtw_cmd.c | 2 +-
.../staging/unisys/common-spar/include/channels/iochannel.h | 4 ++--
.../unisys/common-spar/include/channels/vbuschannel.h | 6 +++---
drivers/staging/unisys/virtpci/virtpci.c | 2 +-
drivers/target/target_core_alua.c | 2 +-
drivers/thunderbolt/ctl.h | 2 +-
drivers/usb/host/max3421-hcd.c | 3 +--
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/mos7720.c | 2 +-
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/uwb/drp-ie.c | 2 +-
drivers/video/fbdev/omap/sossi.c | 2 +-
drivers/video/fbdev/sis/sis_accel.c | 2 +-
fs/autofs4/dev-ioctl.c | 2 +-
fs/btrfs/dev-replace.c | 2 +-
fs/btrfs/send.c | 2 +-
fs/btrfs/tree-log.c | 2 +-
fs/dcache.c | 4 ++--
fs/ecryptfs/keystore.c | 2 +-
fs/ext2/ext2.h | 2 +-
fs/ext4/inline.c | 4 ++--
fs/f2fs/segment.h | 2 +-
fs/kernfs/file.c | 2 +-
fs/ocfs2/localalloc.c | 2 +-
fs/xfs/xfs_export.c | 2 +-
include/drm/drm_rect.h | 2 +-
include/linux/mic_bus.h | 2 +-
include/linux/mm.h | 2 +-
include/linux/moduleparam.h | 2 +-
include/linux/skbuff.h | 2 +-
include/net/caif/caif_layer.h | 2 +-
include/net/ip6_fib.h | 2 +-
include/net/wimax.h | 2 +-
include/uapi/asm-generic/fcntl.h | 2 +-
init/Kconfig | 4 ++--
init/main.c | 2 +-
kernel/jump_label.c | 2 +-
kernel/printk/printk.c | 2 +-
kernel/smp.c | 2 +-
kernel/trace/ring_buffer.c | 2 +-
lib/bitmap.c | 2 +-
lib/dynamic_queue_limits.c | 2 +-
lib/earlycpio.c | 2 +-
lib/syscall.c | 2 +-
mm/hugetlb.c | 2 +-
mm/page_alloc.c | 2 +-
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/hci_core.c | 2 +-
net/sctp/associola.c | 2 +-
net/sctp/chunk.c | 2 +-
net/sunrpc/auth_generic.c | 2 +-
net/wimax/op-rfkill.c | 2 +-
scripts/coccinelle/misc/badty.cocci | 2 +-
scripts/tracing/draw_functrace.py | 2 +-
security/apparmor/context.c | 2 +-
security/keys/keyctl.c | 2 +-
sound/pci/hda/hda_codec.c | 2 +-
sound/pci/hda/patch_sigmatel.c | 2 +-
sound/pci/ice1712/prodigy192.c | 2 +-
sound/soc/codecs/wm9713.c | 2 +-
sound/soc/fsl/fsl_dma.c | 2 +-
sound/sparc/dbri.c | 2 +-
tools/perf/Documentation/perf-diff.txt | 2 +-
tools/power/x86/turbostat/turbostat.8 | 4 ++--
tools/thermal/tmon/pid.c | 2 +-
225 files changed, 266 insertions(+), 266 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index 7405de26ee60..4b3c0208d0a5 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -45,7 +45,7 @@ Description:
The file /sys/devices/system/memory/memoryX/state
is read-write. When read, its contents show the
online/offline state of the memory section. When written,
- root can toggle the the online/offline state of a removable
+ root can toggle the online/offline state of a removable
memory section (see removable file description above)
using the following commands.
# echo online > /sys/devices/system/memory/memoryX/state
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 9f5ffd85560b..a232065a7c6a 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3415,7 +3415,7 @@ giving priority to the center of the metered area.</entry>
<row>
<entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant> </entry>
<entry>A multi-zone metering. The light intensity is measured
-in several points of the frame and the the results are combined. The
+in several points of the frame and the results are combined. The
algorithm of the zones selection and their significance in calculating the
final value is device dependent.</entry>
</row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
index f4e28e7d4751..721728745407 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
@@ -267,7 +267,7 @@ is intended for still imaging applications. The idea is to get the
best possible image quality that the hardware can deliver. It is not
defined how the driver writer may achieve that; it will depend on the
hardware and the ingenuity of the driver writer. High quality mode is
-a different mode from the the regular motion video capture modes. In
+a different mode from the regular motion video capture modes. In
high quality mode:<itemizedlist>
<listitem>
<para>The driver may be able to capture higher
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
index c6ef8f13dc7e..74607b6c1117 100644
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -8,7 +8,7 @@ Properties:
"qcom,kpss-timer" - krait subsystem
"qcom,scss-timer" - scorpion subsystem
-- interrupts : Interrupts for the the debug timer, the first general purpose
+- interrupts : Interrupts for the debug timer, the first general purpose
timer, and optionally a second general purpose timer in that
order.
diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
index 93986a5a8018..3bacc8e0931e 100644
--- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
+++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -9,7 +9,7 @@ Properties:
Compatibility with many Cavium evaluation boards.
-- reg: The base address of the the CF chip select banks. Depending on
+- reg: The base address of the CF chip select banks. Depending on
the device configuration, there may be one or two banks.
- cavium,bus-width: The width of the connection to the CF devices. Valid
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
index d63194a2c848..ada4e2973323 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
@@ -39,7 +39,7 @@ Optional Properties:
- lines-initial-states: Bitmask that specifies the initial state of each
line. When a bit is set to zero, the corresponding line will be initialized to
the input (pulled-up) state. When the bit is set to one, the line will be
- initialized the the low-level output state. If the property is not specified
+ initialized the low-level output state. If the property is not specified
all lines will be initialized to the input state.
The I/O expander can detect input state changes, and thus optionally act as
diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
index d9ee909d2b78..d71258e2d456 100644
--- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
@@ -59,7 +59,7 @@ Optional properties:
Each child node represents one channel and has the following
properties:
Required properties:
- * reg: Pair of pins the the channel is connected to.
+ * reg: Pair of pins the channel is connected to.
0: VP/VN
1: VAUXP[0]/VAUXN[0]
2: VAUXP[1]/VAUXN[1]
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index ec42935f3908..5235cbc551b0 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -9,7 +9,7 @@ Required properties:
Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width
defaults to 1 byte
-- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+- nand-skip-bbtscan: Indicates the BBT scanning should be skipped
- timings: array of 6 bytes for NAND timings. The meanings of these bytes
are:
byte 0 TCLR : CLE to RE delay in number of AHB clock cycles, only 4 bits
diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
index aa7ad622259d..877da34145b0 100644
--- a/Documentation/devicetree/bindings/net/broadcom-systemport.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
@@ -3,7 +3,7 @@
Required properties:
- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the the rx
+- interrupts: interrupts for the device, first cell must be for the rx
interrupts, and the second cell should be for the transmit queues. An
optional third interrupt cell for Wake-on-LAN can be specified
- local-mac-address: Ethernet MAC address (48 bits) of this adapter
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index aff22113a986..e54896427b4a 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -373,7 +373,7 @@ variation uses the path and optionally arg1 set to an autofs mount type.
The call returns 1 if this is a mount point and sets arg1 to the device
number of the mount and field arg2 to the relevant super block magic
number (described below) or 0 if it isn't a mountpoint. In both cases
-the the device number (as returned by new_encode_dev()) is returned
+the device number (as returned by new_encode_dev()) is returned
in field arg1.
If supplied with a file descriptor we're looking for a specific mount,
@@ -387,7 +387,7 @@ is one or 0 if it isn't a mountpoint.
If a path is supplied (and the ioctlfd field is set to -1) then the path
is looked up and is checked to see if it is the root of a mount. If a
type is also given we are looking for a particular autofs mount and if
-a match isn't found a fail is returned. If the the located path is the
+a match isn't found a fail is returned. If the located path is the
root of a mount 1 is returned along with the super magic of the mount
or 0 otherwise.
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index c6594af94d25..27fb3656ec8e 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -87,7 +87,7 @@ should contain the phy name as given in the dt data and in the case of
non-dt boot, it should contain the label of the PHY. The two
devm_phy_get associates the device with the PHY using devres on
successful PHY get. On driver detach, release function is invoked on
-the the devres data and devres data is freed. phy_optional_get and
+the devres data and devres data is freed. phy_optional_get and
devm_phy_optional_get should be used when the phy is optional. These
two functions will never return -ENODEV, but instead returns NULL when
the phy cannot be found.
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index 744f82f86c58..441dd2266531 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -453,7 +453,7 @@ putback_lru_page() function to add migrated pages back to the LRU.
mmap(MAP_LOCKED) SYSTEM CALL HANDLING
-------------------------------------
-In addition the mlock()/mlockall() system calls, an application can request
+In addition to the mlock()/mlockall() system calls, an application can request
that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 32cbbd565902..df27c39b2488 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1909,7 +1909,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
+ appended to the device tree bootargs property.
endchoice
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index d1c3f3a71c94..4f697edd0bad 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -22,7 +22,7 @@
#ifndef __ASSEMBLY__
-/* Unwind reason code according the the ARM EABI documents */
+/* Unwind reason code according to the ARM EABI documents */
enum unwind_reason_code {
URC_OK = 0, /* operation completed successfully */
URC_CONTINUE_UNWIND = 8,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 9e91a4e7519a..300bd6c004de 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -753,7 +753,7 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
}
/**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * _init_main_clk - get a struct clk * for the hwmod's main functional clk
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
@@ -791,7 +791,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
}
/**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
@@ -835,7 +835,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
}
/**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 01de542432a6..6f92e75b6c35 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -423,7 +423,7 @@ static void __init imote2_stargate2_init(void)
}
#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
+/* As the imote2 doesn't currently have a conventional SD slot
* there is no option to hotplug cards, making all this rather simple
*/
static int imote2_mci_get_ro(struct device *dev)
diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S
index b93170e1cc93..d0f01cff23b3 100644
--- a/arch/arm64/crypto/aes-neon.S
+++ b/arch/arm64/crypto/aes-neon.S
@@ -47,7 +47,7 @@
prepare .LReverse_Sbox, .LReverse_ShiftRows, \temp
.endm
- /* apply SubBytes transformation using the the preloaded Sbox */
+ /* apply SubBytes transformation using the preloaded Sbox */
.macro sub_bytes, in
sub v9.16b, \in\().16b, v12.16b
tbl \in\().16b, {v16.16b-v19.16b}, \in\().16b
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 86b5a095c5a1..9c8612385e00 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -480,7 +480,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
#ifdef CONFIG_EXACT_HWERR
/* Make sure all pending read/writes complete. This will ensure any
* accesses which could cause hardware errors completes, and signal
- * the the hardware before we do something silly, like crash the
+ * the hardware before we do something silly, like crash the
* kernel. We don't need to work around anomaly 05000312, since
* we are already atomic
*/
diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c
index 86318a16a252..dc21f94aaaaf 100644
--- a/arch/c6x/platforms/cache.c
+++ b/arch/c6x/platforms/cache.c
@@ -437,7 +437,7 @@ void __init c6x_cache_init(void)
if (!cache_base)
return;
- /* Set L2 caches on the the whole L2 SRAM memory */
+ /* Set L2 caches on the whole L2 SRAM memory */
L2_cache_set_mode(L2MODE_SIZE);
/* Enable L1 */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 45698cd15b7b..bd6ea40f3ef9 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -23,7 +23,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
* The pad bits in the middle are used to prevent the next_ticket number
* overflowing into the now_serving number.
*
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index 53e9dfacd073..3ea4168f28f7 100644
--- a/arch/ia64/include/asm/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -257,7 +257,7 @@ static inline int uv_numa_blade_id(void)
return 0;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return 0;
diff --git a/arch/m68k/platform/coldfire/intc-2.c b/arch/m68k/platform/coldfire/intc-2.c
index 995093357c59..f74f0e473119 100644
--- a/arch/m68k/platform/coldfire/intc-2.c
+++ b/arch/m68k/platform/coldfire/intc-2.c
@@ -7,7 +7,7 @@
* family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
* controllers, and the 547x and 548x families which have only one of them.
*
- * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * The external 7 fixed interrupts are part of the Edge Port unit of these
* ColdFire parts. They can be configured as level or edge triggered.
*
* (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff986a23..30052da1f1a4 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -211,7 +211,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
/*
* Get a pointer to where the new child's register block should have
* been pushed.
- * The Meta's stack grows upwards, and the context is the the first
+ * The Meta's stack grows upwards, and the context is the first
* thing to be pushed by TBX (phew)
*/
*childregs = *current_pt_regs();
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 0536bc021cc6..b417be09196d 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -445,7 +445,7 @@ TRAP_return: /* Make global symbol for debugging */
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look like the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index bfeb8f3c0be6..203767dbeb64 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -16,7 +16,7 @@
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
* is to trigger a wakeup.
*/
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index df69bfd2b006..4ec669f5b0d4 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index)
* offsetof() to determine the offsets into packet headers.
* For example, offsetof(ethhdr, protocol) returns the offset
* of the ethernet protocol field. The bitmask selects which
- * bytes to include the the tag, with bit offset X selecting
+ * bytes to include in the tag, with bit offset X selecting
* byte at offset X from the beginning of the packet data.
* @len: Number of bytes to include. Usually this is the sizeof()
* the field.
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index 78d201fb6c87..b6f41f6b6c70 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -31,7 +31,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*/
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index cd7114147ae7..6660ac807d5a 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -1191,7 +1191,7 @@ int __init kvm_mips_init(void)
* requires TLBs. The TLB handling code is statically linked with
* the rest of the kernel (tlb.c) to avoid the possibility of
* double faulting. The issue is that the TLB code references
- * routines that are part of the the KVM module, which are only
+ * routines that are part of the KVM module, which are only
* available once the module is loaded.
*/
kvm_mips_gfn_to_pfn = gfn_to_pfn;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 05b1d7cf9514..1647426364b9 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -350,7 +350,7 @@ static void co_cache_error_call_notifiers(unsigned long val)
}
/*
- * Called when the the exception is recoverable
+ * Called when the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -359,7 +359,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
}
/**
- * Called when the the exception is not recoverable
+ * Called when the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d428e8471eec..1d1eb1e10ae2 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -144,7 +144,7 @@ void xlr_percpu_fmn_init(void)
* For sending FMN messages, we need credits on the destination
* bucket. Program the credits this core has on the 128 possible
* destination buckets.
- * We cannot use a loop here, because the the first argument has
+ * We cannot use a loop here, because the first argument has
* to be a constant integer value.
*/
COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 34a05a1a990b..af6f17b32531 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -52,7 +52,7 @@ static inline void logmpp(u64 x)
/*
* For a snooping icache, we still need a dummy icbi to purge all the
* prefetched instructions from the ifetch buffers. We also need a sync
- * before the icbi to order the the actual stores to memory that might
+ * before the icbi to order the actual stores to memory that might
* have modified instructions with the icbi.
*/
#define PURGE_PREFETCHED_INS \
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index 334459ad145b..b3219b0ca2c4 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -246,7 +246,7 @@ static inline unsigned int ev_int_get_mask(unsigned int interrupt,
* ev_int_eoi - signal the end of interrupt processing
* @interrupt: the interrupt number
*
- * This function signals the end of processing for the the specified
+ * This function signals the end of processing for the specified
* interrupt, which must be the interrupt currently in service. By
* definition, this is also the highest-priority interrupt.
*
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index ac6432d9be46..a18702780733 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -30,7 +30,7 @@ struct arch_hw_breakpoint {
u16 len; /* length of the target data symbol */
};
-/* Note: Don't change the the first 6 bits below as they are in the same order
+/* Note: Don't change the first 6 bits below as they are in the same order
* as the dabr and dabrx.
*/
#define HW_BRK_TYPE_READ 0x01
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index d48125d0c048..01ecece4ca83 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -94,7 +94,7 @@ __secondary_hold_acknowledge:
#ifdef CONFIG_RELOCATABLE
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
- * is used by kexec-tools to keep the the kdump kernel in the
+ * is used by kexec-tools to keep the kdump kernel in the
* crash_kernel region. The loader is responsible for
* observing the alignment requirement.
*/
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index d8746684f606..a97b81d5cfa6 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -168,7 +168,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on powerpc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 7e70ae968e5f..bf66090de7cc 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -933,7 +933,7 @@ void flush_dcache_icache_hugepage(struct page *page)
* (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table
*
* So long as we atomically load page table pointers we are safe against teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 692998244d2c..a2ce00831362 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -9,7 +9,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * This file is a driver for the the General Purpose Timer (gpt) devices
+ * This file is a driver for the General Purpose Timer (gpt) devices
* found on the MPC5200 SoC. Each timer has an IO pin which can be used
* for GPIO or can be used to raise interrupts. The timer function can
* be used independently from the IO pin, or it can be used to control
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 7044fd36197b..864ced973445 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -251,7 +251,7 @@ static void briq_restart(char *cmd)
* Per default, input/output-device points to the keyboard/screen
* If no card is installed, the built-in serial port is used as a fallback.
* But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
- * the the built-in serial node. Instead, a /failsafe node is created.
+ * to the built-in serial node. Instead, a /failsafe node is created.
*/
static void chrp_init_early(void)
{
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index df241b11d4f7..b7bb2977e87a 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1421,7 +1421,7 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
/*
* This function is supposed to be called on basis of PE from top
- * to bottom style. So the the I/O or MMIO segment assigned to
+ * to bottom style. So the I/O or MMIO segment assigned to
* parent PE could be overrided by its child PEs if necessary.
*/
static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index ea0c7b2ef030..a0b4797a296d 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1128,7 +1128,7 @@ static void debug_sample_entry(struct hws_combined_entry *sample,
* combined-sampling data entry consists of a basic- and a diagnostic-sampling
* data entry. The sampling function is determined by the flags in the perf
* event hardware structure. The function always works with a combined-sampling
- * data entry but ignores the the diagnostic portion if it is not available.
+ * data entry but ignores the diagnostic portion if it is not available.
*
* Note that the implementation focuses on basic-sampling data entries and, if
* such an entry is not valid, the entire combined-sampling data entry is
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 639fce464008..2f03d7badf95 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -187,7 +187,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* prevent the pagetables from being freed on s390.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f49478..ef36086d3db1 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -306,7 +306,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
+ * firmware can sample the value before the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index 1aed0432c64b..74ed2d607036 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -189,7 +189,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on sparc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_disable();
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 71af5747874d..f7f64c80c5b2 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -116,7 +116,7 @@
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
* Likewise, INTCTRL_K is removed and re-added during device
- * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * interrupts, as is the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
* to know our current state.
diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h
index df10a662cc25..50a3d5cbad20 100644
--- a/arch/tile/include/gxio/trio.h
+++ b/arch/tile/include/gxio/trio.h
@@ -206,7 +206,7 @@ typedef struct {
/* Initialize a TRIO context.
*
* This function allocates a TRIO "service domain" and maps the MMIO
- * registers into the the caller's VA space.
+ * registers into the caller's VA space.
*
* @param trio_index Which TRIO shim; Gx36 must pass 0.
* @param context Context object to be initialized.
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index de07fa7d1315..c554ffbb50f7 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -277,7 +277,7 @@ P("\n");
/*
* Called after execve() has started the new image. This allows us
- * to reset the info state. Note that the the mmap'ed memory, if there
+ * to reset the info state. Note that the mmap'ed memory, if there
* was any, has already been unmapped by the exec.
*/
void single_step_execve(void)
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index 54f1c8068c02..04266c294db1 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -71,7 +71,7 @@ static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*
* We use an xadd covering *both* parts of the lock, to increment the tail and
* also load the position of the head, which takes care of memory ordering
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index c63e925fd6b7..361144223ed7 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -512,7 +512,7 @@ static inline int uv_numa_blade_id(void)
return uv_hub_info->numa_blade_id;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return uv_cpu_to_blade[cpu];
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 8f1e22d3b286..5dc89fb405be 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7219,7 +7219,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
if (current->mm == kvm->mm) {
/*
* Free memory regions allocated on behalf of userspace,
- * unless the the memory map has changed due to process exit
+ * unless the memory map has changed due to process exit
* or fd copying.
*/
struct kvm_userspace_memory_region mem;
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 207d9aef662d..a1f84cebb9aa 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -288,7 +288,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
@@ -360,7 +360,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_disable();
pgdp = pgd_offset(mm, addr);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 2e555163c2fe..80e25d7659a2 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -472,7 +472,7 @@ char * __init xen_memory_setup(void)
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
- * We tried to make the the memblock_reserve more selective so
+ * We tried to make the memblock_reserve more selective so
* that it would be clear what region is reserved. Sadly we ran
* in the problem wherein on a 64-bit hypervisor with a 32-bit
* initial domain, the pt_base has the cr3 value which is not
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 600781edc8a3..2e1d20d0b71f 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -6,7 +6,7 @@
* For the new V3 MMU we remap the TLB from virtual == physical
* to the standard Linux mapping used in earlier MMU's.
*
- * The the MMU we also support a new configuration register that
+ * In the MMU we also support a new configuration register that
* specifies how the S32C1I instruction operates with the cache
* controller.
*
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 82bbfa5a05b3..ccadbfd6645e 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -384,7 +384,7 @@ common_exception:
/* Save optional registers. */
save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
-
+
#ifdef CONFIG_TRACE_IRQFLAGS
l32i a4, a1, PT_DEPC
/* Double exception means we came here with an exception
@@ -433,7 +433,7 @@ common_exception_return:
* We need to check some flags for signal handling and rescheduling,
* and have to restore WB and WS, extra states, and all registers
* in the register file that were in use in the user task.
- * Note that we don't disable interrupts here.
+ * Note that we don't disable interrupts here.
*/
_bbsi.l a4, TIF_NEED_RESCHED, 3f
@@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
* of the proper size instead.
*
* This algorithm simply backs out the register changes started by the user
- * excpetion handler, makes it appear that we have started a window underflow
+ * exception handler, makes it appear that we have started a window underflow
* by rotating the window back and then setting the old window base (OWB) in
* the 'ps' register with the rolled back window base. The 'movsp' instruction
* will be re-executed and this time since the next window frames is in the
* active AR registers it won't cause an exception.
*
* If the WindowUnderflow code gets a TLB miss the page will get mapped
- * the the partial windeowUnderflow will be handeled in the double exception
+ * and the partial windeowUnderflow will be handled in the double exception
* handler.
*
* Entry condition:
@@ -1567,8 +1567,8 @@ ENTRY(fast_second_level_miss)
2: /* Special case for cache aliasing.
* We (should) only get here if a clear_user_page, copy_user_page
- * or the aliased cache flush functions got preemptively interrupted
- * by another task. Re-establish temporary mapping to the
+ * or the aliased cache flush functions got preemptively interrupted
+ * by another task. Re-establish temporary mapping to the
* TLBTEMP_BASE areas.
*/
diff --git a/crypto/asymmetric_keys/pkcs7_parser.h b/crypto/asymmetric_keys/pkcs7_parser.h
index d25f4d15370f..31a2ee79dae7 100644
--- a/crypto/asymmetric_keys/pkcs7_parser.h
+++ b/crypto/asymmetric_keys/pkcs7_parser.h
@@ -42,7 +42,7 @@ struct pkcs7_signed_info {
*
* This contains the generated digest of _either_ the Content Data or
* the Authenticated Attributes [RFC2315 9.3]. If the latter, one of
- * the attributes contains the digest of the the Content Data within
+ * the attributes contains the digest of the Content Data within
* it.
*/
struct public_key_signature sig;
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 6f1c616910ac..826a754954f3 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -47,7 +47,7 @@
/*
* Common set of includes for all ACPICA source files.
* We put them here because we don't want to duplicate them
- * in the the source code again and again.
+ * in the source code again and again.
*
* Note: The order of these include files is important.
*/
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 41519a958083..75e61da5d998 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -435,7 +435,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
* The 64-bit X fields are optional extensions to the original 32-bit FADT
* V1.0 fields. Even if they are present in the FADT, they are optional and
* are unused if the BIOS sets them to zero. Therefore, we must copy/expand
- * 32-bit V1.0 fields to the 64-bit X fields if the the 64-bit X field is
+ * 32-bit V1.0 fields to the 64-bit X fields if the 64-bit X field is
* originally zero.
*
* For ACPI 1.0 FADTs (that contain no 64-bit addresses), all 32-bit address
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index dd9dfa15e9d1..d086acf9562f 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -563,7 +563,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
wake_up_interruptible(&apm_waitqueue);
/*
- * Wait for the the suspend_acks_pending variable to drop to
+ * Wait for the suspend_acks_pending variable to drop to
* zero, meaning everybody acked the suspend event (or the
* process was killed.)
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 02225eb19cf6..619f3a30ec55 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -111,7 +111,7 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
}
/**
- * fifo_icap_set_read_size - Set the the size register.
+ * fifo_icap_set_read_size - Set the size register.
* @drvdata: a pointer to the drvdata.
* @data: the size of the following read transaction, in words.
**/
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index e431d11abf8d..231f0149c540 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -168,7 +168,7 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv)
/*
* Look for the timer stop flag in the different states, so that we know
* if the broadcast timer has to be set up. The loop is in the reverse
- * order, because usually one of the deeper states have this flag set.
+ * order, because usually one of the deeper states has this flag set.
*/
for (i = drv->state_count - 1; i >= 0 ; i--) {
if (drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP) {
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 5da5b98b8f29..60f2267c1350 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -53,7 +53,7 @@
#define CMD0_IRQ_THRESHOLD 1
/*
- * The timeout period (in jiffies) for a PDU. When the the number of PDUs in
+ * The timeout period (in jiffies) for a PDU. When the number of PDUs in
* flight is greater than the STAT_IRQ_THRESHOLD or 0 the timer is disabled.
* When there are packets in flight but lower than the threshold, we enable
* the timer and at expiry, attempt to remove any processed packets from the
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 1c73f4fbc252..2f2a4276a014 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -435,7 +435,7 @@ static int hash_get_device_data(struct hash_ctx *ctx,
* @keylen: The lengt of the key.
*
* Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the the hw design spec. Either due to incorrect info in the
+ * specified in the hw design spec. Either due to incorrect info in the
* spec or due to a bug in the hw.
*/
static void hash_hw_write_key(struct hash_device_data *device_data,
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 3784e81e7762..d548a717d5b9 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -471,7 +471,7 @@ static int ichx_gpio_probe(struct platform_device *pdev)
/*
* If necessary, determine the I/O address of ACPI/power management
- * registers which are needed to read the the GPE0 register for GPI pins
+ * registers which are needed to read the GPE0 register for GPI pins
* 0 - 15 on some chipsets.
*/
if (!ichx_priv.desc->uses_gpe0)
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 41e91d70301e..9b43e701db28 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -111,7 +111,7 @@ static int sch_gpio_core_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
@@ -201,7 +201,7 @@ static int sch_gpio_resume_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 04a209e2b66d..ff92d4c5e379 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -529,12 +529,12 @@ EXPORT_SYMBOL(drm_mm_replace_node);
*
* The DRM range allocator supports this use-case through the scanning
* interfaces. First a scan operation needs to be initialized with
- * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The the driver adds
+ * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The driver adds
* objects to the roaster (probably by walking an LRU list, but this can be
* freely implemented) until a suitable hole is found or there's no further
* evitable object.
*
- * The the driver must walk through all objects again in exactly the reverse
+ * The driver must walk through all objects again in exactly the reverse
* order to restore the allocator state. Note that while the allocator is used
* in the scan mode no other operation is allowed.
*
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ad55b06a3cb1..a73c82dff95f 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2366,7 +2366,7 @@ int __i915_add_request(struct intel_engine_cs *ring,
/* Whilst this request exists, batch_obj will be on the
* active_list, and so will hold the active reference. Only when this
- * request is retired will the the batch_obj be moved onto the
+ * request is retired will the batch_obj be moved onto the
* inactive_list and lose its active reference. Hence we do not need
* to explicitly hold another reference here.
*/
diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c
index d38413997379..7a6a4fed2833 100644
--- a/drivers/gpu/drm/i915/i915_gem_userptr.c
+++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
@@ -225,7 +225,7 @@ i915_mmu_notifier_add(struct drm_device *dev,
* either has cancelled gup work queued and we need to
* return back to the user to give time for the gup-workers
* to flush their object references upon which the object will
- * be removed from the interval-tree, or the the range is
+ * be removed from the interval-tree, or the range is
* still in use by another client and the overlap is invalid.
*
* If we do have an overlap, we cannot use the interval tree
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d8324c69fa86..7b3d64f2ad3f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2607,7 +2607,7 @@ void intel_display_handle_reset(struct drm_device *dev)
* will get its events and not get stuck.
*
* Also update the base address of all primary
- * planes to the the last fb to make sure we're
+ * planes to the last fb to make sure we're
* showing the correct fb after a reset.
*
* Need to make two loops over the crtcs so that we
@@ -10854,7 +10854,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
}
/* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
+ * update the output configuration. */
intel_modeset_update_state(dev, prepare_pipes);
if (dev_priv->display.modeset_global_resources)
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 92be50c39ffd..2be3040b28f1 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -2802,8 +2802,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t
ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 00c0d2ba22d3..36af5f14f622 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -353,7 +353,7 @@
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 12c8329644c4..212cc45defc7 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -379,7 +379,7 @@ void radeon_doorbell_free(struct radeon_device *rdev, u32 doorbell)
/*
* radeon_wb_*()
- * Writeback is the the method by which the the GPU updates special pages
+ * Writeback is the method by which the GPU updates special pages
* in memory with the status of certain GPU events (fences, ring pointers,
* etc.).
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 913787085dfa..d616aea4a52c 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -45,7 +45,7 @@
* for GPU/CPU synchronization. When the fence is written,
* it is expected that all buffers associated with that fence
* are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed. Whether
+ * that the relevant GPU caches have been flushed. Whether
* we use a scratch register or memory location depends on the asic
* and whether writeback is enabled.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c
index 088ffdc2f577..6dbaac58c81e 100644
--- a/drivers/gpu/drm/radeon/radeon_vm.c
+++ b/drivers/gpu/drm/radeon/radeon_vm.c
@@ -40,8 +40,8 @@
* can be mapped as snooped (cached system pages) or unsnooped
* (uncached system pages).
* Each VM has an ID associated with it and there is a page table
- * associated with each VMID. When execting a command buffer,
- * the kernel tells the the ring what VMID to use for that command
+ * associated with each VMID. When executing a command buffer,
+ * the kernel tells the ring what VMID to use for that command
* buffer. VMIDs are allocated dynamically as commands are submitted.
* The userspace drivers maintain their own address space and the kernel
* sets up their pages tables accordingly when they submit their
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 531a593912ec..90947e08e44d 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -553,7 +553,7 @@ EXPORT_SYMBOL_GPL(vmbus_close);
* vmbus_sendpacket() - Send the specified buffer on the given channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @requestid: Identifier of the request
* @type: Type of packet that is being send e.g. negotiate, time
* packet etc.
@@ -730,7 +730,7 @@ EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
* vmbus_recvpacket() - Retrieve the user packet on the specified channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @buffer_actual_len: The actual size of the data after it was received
* @requestid: Identifier of the request
*
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 4d6b26979fbd..5a358e591403 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -849,8 +849,8 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the information we
- * need from DSDT.
+ * VMBUS is an acpi enumerated device. Get the IRQ information
+ * from DSDT.
*/
static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index 033d6aca47d3..d41d7e3bf31c 100644
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -117,7 +117,7 @@ static int ucd9200_probe(struct i2c_client *client,
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
- * for the the phases of the rail.
+ * for the phases of the rail.
*/
for (i = 0; i < info->pages; i++) {
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 28cfe97cf1e9..231b54591e2b 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -87,7 +87,7 @@
* These 3 values (SDR and DDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
+ * are also the possible values for ipath_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define IPATH_IB_SDR 1
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index c00ae093b6f8..6b6499a690af 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -333,7 +333,7 @@ struct qib_verbs_txreq {
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for qib_link_speed_enabled and active
+ * are also the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 8c7d94200bdb..c1418e619f0c 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -17,7 +17,7 @@
/*
* Timer function which is run every scan_ms ms when the device is opened.
- * The dev input variable is set to the the input_dev pointer.
+ * The dev input variable is set to the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_polled_dev *dev)
{
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 114f3bcba1b0..24c15bfb2199 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1566,7 +1566,7 @@ reset_hfcsusb(struct hfcsusb *hw)
write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
((hw->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 6590558d1d31..010d3c6cd5f4 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -202,7 +202,7 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
/*:*/
/*H:030
- * Let's jump straight to the the main loop which runs the Guest.
+ * Let's jump straight to the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
* going around and around until something interesting happens.
*/
diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h
index e404b6e44802..ce0fb855c705 100644
--- a/drivers/media/dvb-frontends/tda1002x.h
+++ b/drivers/media/dvb-frontends/tda1002x.h
@@ -1,6 +1,6 @@
/*
TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index 71fb63299de7..17534ff576ca 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1134,7 +1134,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
state->pll_pfactor = 0;
}
- /* Establish any defaults the the user didn't pass */
+ /* Establish any defaults the user didn't pass */
tda10048_establish_defaults(&state->frontend);
/* Set the xtal and freq defaults */
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..1f8820f5f8c0 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -37,7 +37,7 @@
(compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
/* We calculate the baseband frequencies of the carrier and the pilot tones
- * based on the the sampling rate of the audio rds fifo. */
+ * based on the sampling rate of the audio rds fifo. */
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index 2ad65eb29832..00e0818abfc9 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -555,7 +555,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f)
reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94);
/* Okay, we've wasted time working out the correct value,
- but if we use it, it fouls the the window alignment.
+ but if we use it, it fouls the window alignment.
Fudge it to what we want... */
reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16));
reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16));
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 1bf06970ca3e..ab627dfd7b28 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -636,7 +636,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
}
/* Check that the hardware is accessible. If the status bytes are
- * 0xFF then the device is not accessible, the the IRQ belongs
+ * 0xFF then the device is not accessible, the IRQ belongs
* to another driver.
* 4 x u32 interrupt registers.
*/
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 33b9660b7f77..6ea16e20449d 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -316,7 +316,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
* vpbe_get_output - Get output
* @vpbe_dev - vpbe device ptr
*
- * return current vpbe output to the the index
+ * return current vpbe output to the index
*/
static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
{
diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 3d2babd5067a..b8181874a149 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -505,7 +505,7 @@ static int fimc_capture_open(struct file *file)
if (ret == 0 && vc->user_subdev_api && vc->inh_sensor_ctrls) {
/*
- * Recreate controls of the the video node to drop
+ * Recreate controls of the video node to drop
* any controls inherited from the sensor subdev.
*/
fimc_ctrls_delete(vc->ctx);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 2c7aa6720569..5b8a0e779d0f 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1710,7 +1710,7 @@ void omap3isp_print_status(struct isp_device *isp)
* To solve this problem power management support is split into prepare/complete
* and suspend/resume operations. The pipelines are stopped in prepare() and the
* ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
- * resume(), and the the pipelines are restarted in complete().
+ * resume(), and the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not modelled explicitly
* yet.
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index d56f927fc31a..b5d2e805380d 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 474a17e4db0c..4c7f8fed8046 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h
index 0f461ca10cb9..82d19dcdebc0 100644
--- a/drivers/media/usb/dvb-usb/friio.h
+++ b/drivers/media/usb/dvb-usb/friio.h
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
index 52bdb569760b..414c1b752911 100644
--- a/drivers/media/usb/gspca/finepix.c
+++ b/drivers/media/usb/gspca/finepix.c
@@ -143,7 +143,7 @@ again:
* for, then it's the end of the
* frame. Sometimes the jpeg is not complete,
* but there's nothing we can do. We also end
- * here if the the jpeg ends right at the end
+ * here if the jpeg ends right at the end
* of the frame. */
gspca_frame_add(gspca_dev, LAST_PACKET,
data, len);
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 2e8c3afe4ec4..b7b5a1f630af 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1313,7 +1313,7 @@ static int tm6000_usb_probe(struct usb_interface *interface,
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
-/* check if the the device has the iso in endpoint at the correct place */
+/* check if the device has the iso in endpoint at the correct place */
if (!dev->isoc_in.endp) {
printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
rc = -ENODEV;
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 9144a2f3ed82..62adffa2bd50 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1000,7 +1000,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
}
/* Synchronize to the input stream by waiting for the FID bit to be
- * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE.
* stream->last_fid is initialized to -1, so the first isochronous
* frame will always be in sync.
*
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index d15e16737eef..32d8d6a07e99 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -981,7 +981,7 @@ static void v4l_sanitize_format(struct v4l2_format *fmt)
/*
* The v4l2_pix_format structure has been extended with fields that were
* not previously required to be set to zero by applications. The priv
- * field, when set to a magic value, indicates the the extended fields
+ * field, when set to a magic value, indicates that the extended fields
* are valid. Otherwise they will contain undefined values. To simplify
* the API towards drivers zero the extended fields and set the priv
* field to the magic value when the extended pixel format structure
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 04644e7b42b1..303b322756c7 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -373,7 +373,7 @@ static const struct lpddr2_addressing *get_addressing_table(
}
/*
- * Find the the right timing table from the array of timing
+ * Find the right timing table from the array of timing
* tables of the device using DDR clock frequency
*/
static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 787933d43d32..4328cf6ecf13 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
* @target: per target private data
* @sdev: SCSI device
*
- * Update the target negotiation parameters based on the the Inquiry
+ * Update the target negotiation parameters based on the Inquiry
* data, adapter capabilities, and NVRAM settings.
**/
static void
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 193cf168ba84..5d03af1f5103 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -898,7 +898,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
- * This function sets the the operating point of the ARM.
+ * This function sets the operating point of the ARM.
*/
int db8500_prcmu_set_arm_opp(u8 opp)
{
diff --git a/drivers/misc/mic/bus/mic_bus.c b/drivers/misc/mic/bus/mic_bus.c
index 961ae90aae47..1b15af8c5101 100644
--- a/drivers/misc/mic/bus/mic_bus.c
+++ b/drivers/misc/mic/bus/mic_bus.c
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ drivers/virtio/virtio.c
*/
#include <linux/slab.h>
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 913de07e577c..6482a9c4eb44 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -48,7 +48,7 @@
* kernel/user requirements.
*
* Blade percpu resources reserved for kernel use. These resources are
- * reserved whenever the the kernel context for the blade is loaded. Note
+ * reserved whenever the kernel context for the blade is loaded. Note
* that the kernel context is not guaranteed to be always available. It is
* loaded on demand & can be stolen by a user if the user demand exceeds the
* kernel demand. The kernel can always reload the kernel context but
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 95c894482fdd..f87520cfb787 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1594,7 +1594,7 @@ out_2:
* by xpc_notify_senders_of_disconnect_uv(), and to also get an
* error returned here will confuse them. Additionally, since
* in this case the channel is being disconnected we don't need
- * to put the the msg_slot back on the free list.
+ * to put the msg_slot back on the free list.
*/
if (cmpxchg(&msg_slot->func, func, NULL) != func) {
ret = xpSuccess;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 959cb9b70310..c5b1237ecb33 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -942,7 +942,7 @@ static uint8_t gpmi_read_byte(struct mtd_info *mtd)
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
- * because the the operations are the same.
+ * because the operations are the same.
*/
static void block_mark_swapping(struct gpmi_nand_data *this,
void *payload, void *auxiliary)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 7bf416329c19..3430b17875b5 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -252,7 +252,7 @@ struct ubi_fm_pool {
/**
* struct ubi_volume - UBI volume description data structure.
- * @dev: device object to make use of the the Linux device model
+ * @dev: device object to make use of the Linux device model
* @cdev: character device object to create character device
* @ubi: reference to the UBI device description object
* @vol_id: volume ID
@@ -380,7 +380,7 @@ struct ubi_debug_info {
/**
* struct ubi_device - UBI device description structure
- * @dev: UBI device object to use the the Linux device model
+ * @dev: UBI device object to use for the Linux device model
* @cdev: character device object to create character device
* @ubi_num: UBI device number
* @ubi_name: UBI device name
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 20f491713145..72b64109a22f 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -727,7 +727,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
/**
* sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
- * @e: the the physical eraseblock to erase
+ * @e: the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
*
* This function returns zero in case of success and a negative error code in
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 5e8b5609c067..ad5bfe8618a6 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -532,7 +532,7 @@ static int xcan_rx(struct net_device *ndev)
* @isr: interrupt status register value
*
* This is the CAN error interrupt and it will
- * check the the type of error and forward the error
+ * check the type of error and forward the error
* frame to upper layers.
*/
static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index 25d6b2a10e4e..a6fa3c211f69 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1234,7 +1234,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
* @budget : maximum number of packets that the current CPU can receive from
* all interfaces.
* Description :
- * This function implements the the reception process.
+ * This function implements the reception process.
* Also it runs the TX completion thread
*/
static int xgmac_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 93ff8ef39352..50a7353a85c8 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2363,7 +2363,7 @@ static irqreturn_t be_intx(int irq, void *dev)
}
be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- /* Return IRQ_HANDLED only for the the first spurious intr
+ /* Return IRQ_HANDLED only for the first spurious intr
* after a valid intr to stop the kernel from branding
* this irq as a bad one!
*/
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 1acf5034db10..ee82072b4c08 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -3986,7 +3986,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
* @hw: Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*/
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 48b74a549155..392eb5748897 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3892,7 +3892,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
* @hw: pointer to the HW structure
*
* ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
- * register, so the the bus width is hard coded.
+ * register, so the bus width is hard coded.
**/
static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 236a6183a865..0172e6b70eee 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2166,7 +2166,7 @@ out:
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 87bd53fdd209..81e6836f38ee 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -229,7 +229,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
struct pci_dev *pdev;
- /* determine whether to use the the parent device
+ /* determine whether to use the parent device
*/
if (ixgbe_pcie_from_parent(&adapter->hw))
pdev = adapter->pdev->bus->parent->self;
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index f5e4b820128b..aad8fdb4dfc6 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2158,7 +2158,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
/*
* In PCI 33 mode, the P_PLL is not used, and therefore,
- * the the P_PLL_LOCK bit in the adapter_status register will
+ * the P_PLL_LOCK bit in the adapter_status register will
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 3b67d60d4378..b8da6e89059a 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -83,7 +83,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* returns: 0 on success, -ETIMEDOUT on a timeout
*
* Writes the value to the requested register by first writing the value
- * into MWD register. The the MCR register is then appropriately setup
+ * into MWD register. The MCR register is then appropriately setup
* to finish the write operation.
*/
static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 5a34e72bab9a..6113a29f01bc 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -250,14 +250,14 @@ struct i2400m_barker_db;
*
* @bus_setup: [optional fill] Function called by the bus-generic code
* [i2400m_setup()] to setup the basic bus-specific communications
- * to the the device needed to load firmware. See LIFE CYCLE above.
+ * to the device needed to load firmware. See LIFE CYCLE above.
*
* NOTE: Doesn't need to upload the firmware, as that is taken
* care of by the bus-generic code.
*
* @bus_release: [optional fill] Function called by the bus-generic
* code [i2400m_release()] to shutdown the basic bus-specific
- * communications to the the device needed to load firmware. See
+ * communications to the device needed to load firmware. See
* LIFE CYCLE above.
*
* This function does not need to reset the device, just tear down
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 0b602951ff6b..4466ee71d1e4 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -693,7 +693,7 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq,
* right spot where to insert the packet; we know the queue is
* not empty, so we are not the first ones; we also know we
* are not going to be the last ones. The list is sorted, so
- * we have to insert before the the first guy with an nsn_itr
+ * we have to insert before the first guy with an nsn_itr
* greater that our nsn. */
skb_queue_walk(&roq->queue, skb_itr) {
roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb;
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index f20886ade1cc..1f7b2b922fae 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -233,7 +233,7 @@
* i2400m_tx_skip_tail() Marks unusable FIFO tail space
* i2400m->bus_tx_kick()
*
- * Now i2400m->bus_tx_kick() is the the bus-specific driver backend
+ * Now i2400m->bus_tx_kick() is the bus-specific driver backend
* implementation; that would do:
*
* i2400m->bus_tx_kick()
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index 1c584c4b019c..f34f24d362ed 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -77,7 +77,7 @@ struct rx_attention {
* first_msdu is set.
*
* peer_idx_invalid
- * Indicates no matching entries within the the max search
+ * Indicates no matching entries within the max search
* count. Only set when first_msdu is set.
*
* peer_idx_timeout
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index dc6bd8cd9b83..e32154fe1732 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -98,7 +98,7 @@ struct bus_request {
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- * implemented using the asynchronous mode allowing the the bus
+ * implemented using the asynchronous mode allowing the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 339d89f14d32..8c866de2fe43 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1173,7 +1173,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
* Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
+ * response is available in the FIFO
*
* CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index 9a2afa2c690b..5184d6cbcb90 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -638,7 +638,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN,
AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT);
- /* on AR92xx, the highest bit of count will make the the chip send
+ /* on AR92xx, the highest bit of count will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 542a8d51d3b0..5c8f1e6da5dc 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1627,7 +1627,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
- /* on AR93xx and newer, count = 0 will make the the chip send
+ /* on AR93xx and newer, count = 0 will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index a1f1127d7808..24cce9db3ce0 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -1609,7 +1609,7 @@ struct wcn36xx_hal_config_bss_params {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -1746,7 +1746,7 @@ struct wcn36xx_hal_config_bss_params_v1 {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -3736,10 +3736,10 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
/* success or failure */
u32 status;
- /* Length of the responce message */
+ /* Length of the response message */
u32 rsp_length;
- /* FIXME: Currently considering the the responce will be less than
+ /* FIXME: Currently considering that the response will be less than
* 100bytes */
u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
} __packed;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 1b474828d5b8..46a0d6575454 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3819,7 +3819,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
}
/*
- * Suspend the the MAC and update the slot timing
+ * Suspend the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index d6073f67b212..c2f550cfbf41 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -189,7 +189,7 @@ enum iwl_tx_flags {
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
+ * @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @key: security key
* @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
@@ -552,7 +552,7 @@ struct iwl_extended_beacon_notif {
/**
* enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
+ * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
index 6cc243f7cf60..8357397cf7d0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
@@ -65,7 +65,7 @@
#include "fw-api.h"
#include "mvm.h"
-/* Maps the driver specific channel width definition to the the fw values */
+/* Maps the driver specific channel width definition to the fw values */
static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
{
switch (chandef->width) {
@@ -86,7 +86,7 @@ static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
/*
* Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
+ * freq) definitions to the fw values
*/
static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index 2713f7acd35e..53618b0e29c0 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -262,7 +262,7 @@ free_and_exit:
* This function is called when the 'fw_dump' file is opened for
* reading.
* This function dumps firmware memory in different files
- * (ex. DTCM, ITCM, SQRAM etc.) based on the the segments for
+ * (ex. DTCM, ITCM, SQRAM etc.) based on the segments for
* debugging.
*/
static ssize_t
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 8428858204a6..e1f05ad89d9e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -596,7 +596,7 @@ static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
* rsi_sdio_host_intf_read_pkt() - This function reads the packet
from the device.
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
* @length: Length of the data to be read from the device.
*
* Return: 0 on success, -1 on failure.
@@ -627,7 +627,7 @@ int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter,
* rsi_init_sdio_interface() - This function does init specific to SDIO.
*
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
*
* Return: 0 on success, -1 on failure.
*/
diff --git a/drivers/net/wireless/ti/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h
index 2bdec38699f4..bfe998947957 100644
--- a/drivers/net/wireless/ti/wl1251/acx.h
+++ b/drivers/net/wireless/ti/wl1251/acx.h
@@ -1243,7 +1243,7 @@ struct wl1251_acx_arp_filter {
u8 address[16]; /* The IP address used to filter ARP packets.
ARP packets that do not match this address are
dropped. When the IP Version is 4, the last 12
- bytes of the the address are ignored. */
+ bytes of the address are ignored. */
} __attribute__((packed));
struct wl1251_acx_ac_cfg {
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 293ed4b687ba..be53777b9f3d 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1849,7 +1849,7 @@ static void of_alias_add(struct alias_prop *ap, struct device_node *np,
* of_alias_scan - Scan all properties of 'aliases' node
*
* The function scans all the properties of 'aliases' node and populate
- * the the global lookup table with the properties. It returns the
+ * the global lookup table with the properties. It returns the
* number of alias_prop found, or error code in error case.
*
* @dt_alloc: An allocator that provides a virtual address to memory
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 6cd5160fc057..89f16d320ead 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -36,7 +36,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#define pr_fmt(fmt) "acpiphp_glue: " fmt
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
index 7dfef3ee5b53..40511e39cea5 100644
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ b/drivers/pcmcia/pxa2xx_hx4700.c
@@ -33,7 +33,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/*
* IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
* The asic3 default IRQ type is level trigger low level detect, exactly
- * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+ * the signal present on GPIOD4_CF_nCD when a CF card is inserted.
* If the IRQ type is not changed, the asic3 interrupt handler will loop
* repeatedly because it is unable to clear the level trigger interrupt.
*/
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index e7cab07eef47..37060a07f260 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1250,7 +1250,7 @@ static int nmk_gpio_probe(struct platform_device *dev)
platform_set_drvdata(dev, nmk_chip);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 60464a2648aa..67a538ebea90 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1461,7 +1461,7 @@ static int at91_gpio_of_irq_setup(struct device_node *node,
writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 750a20275664..b01c7698df02 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -298,8 +298,9 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
ret = power_supply_show_property(dev, attr, prop_buf);
if (ret == -ENODEV || ret == -ENODATA) {
- /* When a battery is absent, we expect -ENODEV. Don't abort;
- send the uevent with at least the the PRESENT=0 property */
+ /* When a battery is absent, we expect -ENODEV.
+ * Don't abort; send the uevent with at least
+ * the PRESENT=0 property */
ret = 0;
continue;
}
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index ccf54f06396b..2108302cc965 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -122,7 +122,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
- * configurations, so we use the the first method there, stripping off
+ * configurations, so we use the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index fd22c811cbe1..8a84e2e42ca2 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3454,7 +3454,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 2035b0d64351..e62a7346428a 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1983,7 +1983,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
/*
* Device's PID has changed. We need to cleanup
* and re-login. If there is another device with
- * the the newly discovered pid, send an scn notice
+ * the newly discovered pid, send an scn notice
* so that its new pid can be discovered.
*/
list_for_each(qe, &rport->port->rport_q) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 00ee0ed642aa..0b88610b9795 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -510,7 +510,7 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
* @skb: The receive skb
* @netdev: The associated net device
* @ptype: The packet_type structure which was used to register this handler
- * @orig_dev: The original net_device the the skb was received on.
+ * @orig_dev: The original net_device that the skb was received on.
* (in case dev is a bond)
*
* Returns: 0 for success
@@ -2727,7 +2727,7 @@ module_exit(fcoe_exit);
* fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
* @seq: active sequence in the FLOGI or FDISC exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
@@ -2756,7 +2756,7 @@ done:
* fcoe_logo_resp() - FCoE specific LOGO response handler
* @seq: active sequence in the LOGO exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 34a1b1f333b4..65a53a9eb059 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -213,7 +213,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new)
* that doesn't have a priv (fcf was deleted). However,
* libfcoe will always delete FCFs before trying to add
* them. This is ensured because both recv_adv and
- * age_fcfs are protected by the the fcoe_ctlr's mutex.
+ * age_fcfs are protected by the fcoe_ctlr's mutex.
* This means that we should never get a FCF with a
* non-NULL priv pointer.
*/
@@ -694,7 +694,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
*
* The caller must check that the length is a multiple of 4.
* The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
- * The the skb must also be an fc_frame.
+ * The skb must also be an fc_frame.
*
* This is called from the lower-level driver with spinlocks held,
* so we must not take a mutex here.
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 22a9bb1abae1..025ec5c10978 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -244,7 +244,7 @@ enum sci_controller_states {
SCIC_INITIALIZED,
/**
- * This state indicates the the controller is in the process of becoming
+ * This state indicates that the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 47a013fffae7..07af745220eb 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete(
* permitted. This state is entered from the INITIAL state. This state
* is entered from the STOPPING state.
*
- * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * @SCI_DEV_STARTING: This state indicates that the remote device is in
* the process of becoming ready (i.e. starting). In this state no new
* IO operations are permitted. This state is entered from the STOPPED
* state.
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
index c7ee81d01125..f22950b12b8b 100644
--- a/drivers/scsi/isci/remote_node_context.h
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state {
/**
* struct sci_remote_node_context - This structure contains the data
* associated with the remote node context object. The remote node context
- * (RNC) object models the the remote device information necessary to manage
+ * (RNC) object models the remote device information necessary to manage
* the silicon RNC.
*/
struct sci_remote_node_context {
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 5d6fda72d659..ba330e56bfe7 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -67,7 +67,7 @@
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
-* @ihost: host on which the the request was queued
+* @ihost: host on which the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 6eed9e76a166..20bdd0603108 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1680,7 +1680,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -1713,7 +1713,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -1846,7 +1846,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -1878,7 +1878,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 7a5d81a65be8..5a447c2c6522 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5813,7 +5813,7 @@ reject_out:
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful, the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 2a17e31265b8..fbad2c534691 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2012,7 +2012,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so that the round robin selection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
@@ -5727,7 +5727,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
}
/* This routine decrements the reference count for a ndlp structure. If the
- * count goes to 0, this indicates the the associated nodelist should be
+ * count goes to 0, this indicates that the associated nodelist should be
* freed. Returning 1 indicates the ndlp resource has been released; on the
* other hand, returning 0 indicates the ndlp resource has not been released
* yet.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index a5769a9960ac..ae2d01f7e67d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3903,7 +3903,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelevant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 1f292e29d566..d9a9ddbf1771 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2265,7 +2265,7 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * that the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 32ada0505576..a24a0b1e59d4 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -16748,7 +16748,7 @@ out:
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index dd12c6fe57a6..7508ee4810a8 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3212,7 +3212,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when HBA driver received the identify done event or initiate FIS received
* event(for SATA), it will invoke this function to notify the sas layer that
- * the sas toplogy has formed, please discover the the whole sas domain,
+ * the sas toplogy has formed, please discover the whole sas domain,
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 80b8408ac3e3..4cbdc43d509c 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -354,7 +354,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
{
/*
* On all 4xx PPC's the SPI bus is shared/multiplexed with
- * the 2nd I2C bus. We need to enable the the SPI bus before
+ * the 2nd I2C bus. We need to enable the SPI bus before
* using it.
*/
diff --git a/drivers/staging/android/ion/ion.c b/drivers/staging/android/ion/ion.c
index 270360912b2c..200ea0ccf7c4 100644
--- a/drivers/staging/android/ion/ion.c
+++ b/drivers/staging/android/ion/ion.c
@@ -901,7 +901,7 @@ void ion_pages_sync_for_device(struct device *dev, struct page *page,
sg_set_page(&sg, page, size, 0);
/*
* This is not correct - sg_dma_address needs a dma_addr_t that is valid
- * for the the targeted device, but this works on the currently targeted
+ * for the targeted device, but this works on the currently targeted
* hardware.
*/
sg_dma_address(&sg) = page_to_phys(page);
diff --git a/drivers/staging/android/uapi/binder.h b/drivers/staging/android/uapi/binder.h
index 904adb7600cf..1dd36442263e 100644
--- a/drivers/staging/android/uapi/binder.h
+++ b/drivers/staging/android/uapi/binder.h
@@ -265,7 +265,7 @@ enum binder_driver_return_protocol {
BR_FAILED_REPLY = _IO('r', 17),
/*
- * The the last transaction (either a bcTRANSACTION or
+ * The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
};
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 831b7c6fe494..3f1f28e2dce2 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -1234,7 +1234,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
/* Initialize the Space Available Register */
writel(0, &rxmac->space_avail);
- /* Initialize the the mif_ctrl register
+ /* Initialize the mif_ctrl register
* bit 3: Receive code error. One or more nibbles were signaled as
* errors during the reception of the packet. Clear this
* bit in Gigabit, set it in 100Mbit. This was derived
diff --git a/drivers/staging/lustre/lustre/llite/file.c b/drivers/staging/lustre/lustre/llite/file.c
index fd1b75a3a569..6c40b3665521 100644
--- a/drivers/staging/lustre/lustre/llite/file.c
+++ b/drivers/staging/lustre/lustre/llite/file.c
@@ -364,7 +364,7 @@ int ll_file_release(struct inode *inode, struct file *file)
fd = LUSTRE_FPRIVATE(file);
LASSERT(fd != NULL);
- /* The last ref on @file, maybe not the the owner pid of statahead.
+ /* The last ref on @file, maybe not the owner pid of statahead.
* Different processes can open the same dir, "ll_opendir_key" means:
* it is me that should stop the statahead thread. */
if (S_ISDIR(inode->i_mode) && lli->lli_opendir_key == fd &&
diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
index 5e4e49fab63c..815c5866cb4b 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
@@ -447,7 +447,7 @@ struct timeout_item* ptlrpc_new_timeout(int time, enum timeout_event event,
}
/**
- * Register timeout event on the the pinger thread.
+ * Register timeout event on the pinger thread.
* Note: the timeout list is an sorted list with increased timeout value.
*/
static struct timeout_item*
diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index 104b01fa0fad..803ddfb8d065 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -453,7 +453,7 @@ u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network *pnetwork)
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the connection. */
+ /* If the driver wants to use the bssid to create the connection. */
/* If not, we have to copy the connecting AP's MAC address to it so that */
/* the driver just has the bssid information for PMKIDList searching. */
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 73410ccfb1ec..ebefffd2e96a 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -920,7 +920,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
int i;
struct ieee80211_rxb *rxb = NULL;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.c b/drivers/staging/rtl8712/rtl871x_cmd.c
index d9c1561e3272..5aae4cce8477 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -527,7 +527,7 @@ u8 r8712_joinbss_cmd(struct _adapter *padapter, struct wlan_network *pnetwork)
memcpy(&psecuritypriv->authenticator_ie[1],
&psecnetwork->IEs[12], (256-1));
psecnetwork->IELength = 0;
- /* If the the driver wants to use the bssid to create the connection.
+ /* If the driver wants to use the bssid to create the connection.
* If not, we copy the connecting AP's MAC address to it so that
* the driver just has the bssid information for PMKIDList searching.
*/
diff --git a/drivers/staging/rtl8723au/core/rtw_cmd.c b/drivers/staging/rtl8723au/core/rtw_cmd.c
index 7241a5a8731c..611cd1f6c555 100644
--- a/drivers/staging/rtl8723au/core/rtw_cmd.c
+++ b/drivers/staging/rtl8723au/core/rtw_cmd.c
@@ -518,7 +518,7 @@ int rtw_joinbss_cmd23a(struct rtw_adapter *padapter,
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the
+ /* If the driver wants to use the bssid to create the
* connection. If not, we have to copy the connecting AP's
* MAC address to it so that the driver just has the bssid
* information for PMKIDList searching. */
diff --git a/drivers/staging/unisys/common-spar/include/channels/iochannel.h b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
index 24e11858e0ee..0fce4fd54ce9 100644
--- a/drivers/staging/unisys/common-spar/include/channels/iochannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
@@ -595,7 +595,7 @@ struct uiscmdrsp_scsitaskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
@@ -642,7 +642,7 @@ struct uiscmdrsp_vdiskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
diff --git a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
index 8facb51143ae..9dc629f36cc1 100644
--- a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
@@ -68,11 +68,11 @@ typedef struct _ULTRA_VBUS_HEADERINFO {
u32 devInfoCount; /* num of items in DevInfo member */
/* (this is the allocated size) */
u32 chpInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the ChpInfo struct (below) */
+ /* to the ChpInfo struct (below) */
u32 busInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the BusInfo struct (below) */
+ /* to the BusInfo struct (below) */
u32 devInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the DevInfo array (below) */
+ /* to the DevInfo array (below) */
u8 reserved[104];
} ULTRA_VBUS_HEADERINFO;
diff --git a/drivers/staging/unisys/virtpci/virtpci.c b/drivers/staging/unisys/virtpci/virtpci.c
index d9443a968ddf..97f3d823c688 100644
--- a/drivers/staging/unisys/virtpci/virtpci.c
+++ b/drivers/staging/unisys/virtpci/virtpci.c
@@ -745,7 +745,7 @@ static int virtpci_device_resume(struct device *dev)
/* For a child device just created on a client bus, fill in
* information about the driver that is controlling this device into
- * the the appropriate slot within the vbus channel of the bus
+ * the appropriate slot within the vbus channel of the bus
* instance.
*/
static void fix_vbus_devInfo(struct device *dev, int devNo, int devType,
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index fbc5ebb5f761..c0664ec01fc2 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -411,7 +411,7 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
} else {
/*
* Extract the RELATIVE TARGET PORT IDENTIFIER to identify
- * the Target Port in question for the the incoming
+ * the Target Port in question for the incoming
* SET_TARGET_PORT_GROUPS op.
*/
rtpi = get_unaligned_be16(ptr + 2);
diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h
index ba87d6e731dd..1a4ba247f160 100644
--- a/drivers/thunderbolt/ctl.h
+++ b/drivers/thunderbolt/ctl.h
@@ -44,7 +44,7 @@ struct tb_cfg_result {
* If err = 1 then this is the port that send the
* error.
* If err = 0 and if this was a cfg_read/write then
- * this is the the upstream port of the responding
+ * this is the upstream port of the responding
* switch.
* Otherwise the field is set to zero.
*/
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 6234c75da33f..50294f31f227 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -313,8 +313,7 @@ static const int hrsl_to_error[] = {
/*
* See http://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a
- * reasonable overview of how control transfers use the the IN/OUT
- * tokens.
+ * reasonable overview of how control transfers use the IN/OUT tokens.
*/
#define MAX3421_HXFR_BULK_IN(ep) (0x00 | (ep)) /* bulk or interrupt */
#define MAX3421_HXFR_SETUP 0x10
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index abed30b82905..54674c03d22b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1652,7 +1652,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
- * RExit to a disconnect state). If so, let the the driver know it's
+ * RExit to a disconnect state). If so, let the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED(temp) &&
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 01bf53392819..1b99a08ca2de 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -261,7 +261,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
* Cypress app note that describes this mechanism
- * states the the low-speed part can't handle more
+ * states that the low-speed part can't handle more
* than 800 bytes/sec, in which case 4800 baud is the
* safest speed for a part like that.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index dfd728a263d2..71636a617d89 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -429,7 +429,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
}
/*
- * This is the the common top part of all parallel port callback operations that
+ * This is the common top part of all parallel port callback operations that
* send synchronous messages to the device. This implements convoluted locking
* that avoids two scenarios: (1) a port operation is called after usbserial
* has called our release function, at which point struct mos7715_parport has
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 0677139c6065..d435940d5598 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -46,7 +46,7 @@
*
* ASSUMPTIONS:
*
- * - We use the the as device address the port number where it is
+ * - We use as device address the port number where it is
* connected (port 0 doesn't exist). For unauth, it is 128 + that.
*
* ROADMAP:
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
index b7d4f6b75eef..caa4cb40334d 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/uwb/drp-ie.c
@@ -262,7 +262,7 @@ int uwb_drp_ie_update(struct uwb_rsv *rsv)
* We are given a zone id and the MAS bitmap of bits that need to be set in
* this zone. Note that this zone may already have bits set and this only
* adds settings - we cannot simply assign the MAS bitmap contents to the
- * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * zone contents. We iterate over the bits (MAS) in the zone and set the
* bits that are set in the given MAS bitmap.
*/
static
diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
index d4e7684e7045..501bc08dc125 100644
--- a/drivers/video/fbdev/omap/sossi.c
+++ b/drivers/video/fbdev/omap/sossi.c
@@ -370,7 +370,7 @@ static void sossi_set_bits_per_cycle(int bpc)
int bus_pick_count, bus_pick_width;
/*
- * We set explicitly the the bus_pick_count as well, although
+ * We set explicitly the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
diff --git a/drivers/video/fbdev/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c
index ceb434c95c0d..9177b8056356 100644
--- a/drivers/video/fbdev/sis/sis_accel.c
+++ b/drivers/video/fbdev/sis/sis_accel.c
@@ -215,7 +215,7 @@ SiS310SubsequentScreenToScreenCopy(struct sis_video_info *ivideo, int src_x, int
* and destination blitting areas overlap and
* adapt the bitmap addresses synchronously
* if the coordinates exceed the valid range.
- * The the areas do not overlap, we do our
+ * If the areas do not overlap, we do our
* normal check.
*/
if((mymax - mymin) < height) {
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 5b570b6efa28..ecbd6b7b6c9a 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -507,7 +507,7 @@ static int autofs_dev_ioctl_askumount(struct file *fp,
* located path is the root of a mount we return 1 along with
* the super magic of the mount or 0 otherwise.
*
- * In both cases the the device number (as returned by
+ * In both cases the device number (as returned by
* new_encode_dev()) is also returned.
*/
static int autofs_dev_ioctl_ismountpoint(struct file *fp,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index eea26e1b2fda..8ae32564e6d7 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -849,7 +849,7 @@ int btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace)
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
- * not called and the the filesystem is remounted
+ * not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancelation is wanted.
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index 6528aa662181..6c5ce8e50f32 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -3402,7 +3402,7 @@ verbose_printk("btrfs: process_recorded_refs %llu\n", sctx->cur_ino);
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
- * the the current inum. To handle this case, we create the
+ * than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 1d1ba083ca6e..3d5b414003b3 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2654,7 +2654,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
mutex_unlock(&log_root_tree->log_mutex);
/*
- * nobody else is going to jump in and write the the ctree
+ * nobody else is going to jump in and write the ctree
* super here because the log_commit atomic below is protecting
* us. We must be called with a transaction handle pinning
* the running transaction open, so a full commit can't hop
diff --git a/fs/dcache.c b/fs/dcache.c
index cb25a1a5e307..4a327e47b6b0 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1885,8 +1885,8 @@ EXPORT_SYMBOL(d_obtain_root);
* same inode, only the actual correct case is stored in the dcache for
* case-insensitive filesystems.
*
- * For a case-insensitive lookup match and if the the case-exact dentry
- * already exists in in the dcache, use it and return it.
+ * For a case-insensitive lookup match and if the case-exact dentry
+ * already exists in the dcache, use it and return it.
*
* If no entry exists with the exact case name, allocate new dentry with
* the exact case, and return the spliced entry.
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 4725a07f003c..bcdfbc7568d7 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -900,7 +900,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack {
* @filename: This function kmalloc's the memory for the filename
* @filename_size: This function sets this to the amount of memory
* kmalloc'd for the filename
- * @packet_size: This function sets this to the the number of octets
+ * @packet_size: This function sets this to the number of octets
* in the packet parsed
* @mount_crypt_stat: The mount-wide cryptographic context
* @data: The memory location containing the start of the tag 70
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index d9a17d0b124d..c9c6f2e5a0a0 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -51,7 +51,7 @@ struct ext2_block_alloc_info {
/*
* Was i_next_alloc_goal in ext2_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it is the physical block number of the block which was most-recently
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index bea662bd0ca6..3b94971b7b9b 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -271,7 +271,7 @@ static int ext4_create_inline_data(handle_t *handle,
len = 0;
}
- /* Insert the the xttr entry. */
+ /* Insert the xttr entry. */
i.value = value;
i.value_len = len;
@@ -829,7 +829,7 @@ out:
/*
* Prepare the write for the inline data.
- * If the the data can be written into the inode, we just read
+ * If the data can be written into the inode, we just read
* the page and make it uptodate, and start the journal.
* Otherwise read the page, makes it dirty so that it can be
* handle in writepages(the i_disksize update is left to the
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index ff483257283b..5b3f3135fb0a 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -150,7 +150,7 @@ struct seg_entry {
unsigned short valid_blocks; /* # of valid blocks */
unsigned char *cur_valid_map; /* validity bitmap of blocks */
/*
- * # of valid blocks and the validity bitmap stored in the the last
+ * # of valid blocks and the validity bitmap stored in the last
* checkpoint pack. This information is used by the SSR mode.
*/
unsigned short ckpt_valid_blocks;
diff --git a/fs/kernfs/file.c b/fs/kernfs/file.c
index 4429d6d9217f..2d4e4ef09b73 100644
--- a/fs/kernfs/file.c
+++ b/fs/kernfs/file.c
@@ -259,7 +259,7 @@ static ssize_t kernfs_fop_read(struct file *file, char __user *user_buf,
* There is no easy way for us to know if userspace is only doing a partial
* write, so we don't support them. We expect the entire buffer to come on
* the first write. Hint: if you're writing a value, first read the file,
- * modify only the the value you're changing, then write entire buffer
+ * modify only the value you're changing, then write entire buffer
* back.
*/
static ssize_t kernfs_fop_write(struct file *file, const char __user *user_buf,
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 044013455621..c0aa12bdb106 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -690,7 +690,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb,
/*
* Under certain conditions, the window slide code
* might have reduced the number of bits available or
- * disabled the the local alloc entirely. Re-check
+ * disabled the local alloc entirely. Re-check
* here and return -ENOSPC if necessary.
*/
status = -ENOSPC;
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index 5a6bd5d8779a..85438d16e633 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -71,7 +71,7 @@ xfs_fs_encode_fh(
fileid_type = FILEID_INO32_GEN_PARENT;
/*
- * If the the filesystem may contain 64bit inode numbers, we need
+ * If the filesystem may contain 64bit inode numbers, we need
* to use larger file handles that can represent them.
*
* While we only allocate inodes that do not fit into 32 bits any
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index 26bb55e9e8b6..37cdb83e1e24 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -120,7 +120,7 @@ static inline int drm_rect_height(const struct drm_rect *r)
}
/**
- * drm_rect_visible - determine if the the rectangle is visible
+ * drm_rect_visible - determine if the rectangle is visible
* @r: rectangle whose visibility is returned
*
* RETURNS:
diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h
index d5b5f76d57ef..91c32b80c6d1 100644
--- a/include/linux/mic_bus.h
+++ b/include/linux/mic_bus.h
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ include/linux/virtio.h.
*/
#ifndef _MIC_BUS_H_
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 8981cc882ed2..0b3da6784a66 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -196,7 +196,7 @@ extern pgprot_t protection_map[16];
#define FAULT_FLAG_USER 0x80 /* The fault originated in userspace */
/*
- * vm_fault is filled by the the pagefault handler and passed to the vma's
+ * vm_fault is filled by the pagefault handler and passed to the vma's
* ->fault function. The vma's ->fault is responsible for returning a bitmask
* of VM_FAULT_xxx flags that give details about how the fault was handled.
*
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 494f99e852da..f9f20ca81f51 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -94,7 +94,7 @@ struct kparam_array
* ".") the kernel commandline parameter. Note that - is changed to _, so
* the user can use "foo-bar=1" even for variable "foo_bar".
*
- * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * @perm is 0 if the variable is not to appear in sysfs, or 0444
* for world-readable, 0644 for root-writable, etc. Note that if it
* is writable, you may need to use kparam_block_sysfs_write() around
* accesses (esp. charp, which can be kfreed when it changes).
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index abde271c18ae..51301dc8c0c5 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2697,7 +2697,7 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
* must call this function to return the skb back to the stack, with
* or without a timestamp.
*
- * @skb: clone of the the original outgoing packet
+ * @skb: clone of the original outgoing packet
* @hwtstamps: hardware time stamps, may be NULL if not available
*
*/
diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h
index 94e5ed64dc6d..e9a8d524ab06 100644
--- a/include/net/caif/caif_layer.h
+++ b/include/net/caif/caif_layer.h
@@ -184,7 +184,7 @@ struct cflayer {
* CAIF packet downwards in the stack.
* Packet handling rules:
* - The CAIF packet (cfpkt) ownership is passed to the
- * transmit function. This means that the the packet
+ * transmit function. This means that the packet
* cannot be accessed after passing it to the below
* layer using dn->transmit().
*
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 9bcb220bd4ad..f422729b30c3 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -100,7 +100,7 @@ struct rt6_info {
struct in6_addr rt6i_gateway;
/* Multipath routes:
- * siblings is a list of rt6_info that have the the same metric/weight,
+ * siblings is a list of rt6_info that have the same metric/weight,
* destination, but not the same gateway. nsiblings is just a cache
* to speed up lookup.
*/
diff --git a/include/net/wimax.h b/include/net/wimax.h
index c52b68577cb0..c9705a3eb3b7 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -43,7 +43,7 @@
*
* USAGE
*
- * Embed a `struct wimax_dev` at the beginning of the the device's
+ * Embed a `struct wimax_dev` at the beginning of the device's
* private structure, initialize and register it. For details, see
* `struct wimax_dev`s documentation.
*
diff --git a/include/uapi/asm-generic/fcntl.h b/include/uapi/asm-generic/fcntl.h
index 7543b3e51331..3c8f396825b8 100644
--- a/include/uapi/asm-generic/fcntl.h
+++ b/include/uapi/asm-generic/fcntl.h
@@ -142,7 +142,7 @@
* record locks, but are "owned" by the open file description, not the
* process. This means that they are inherited across fork() like BSD (flock)
* locks, and they are only released automatically when the last reference to
- * the the open file against which they were acquired is put.
+ * the open file against which they were acquired is put.
*/
#define F_OFD_GETLK 36
#define F_OFD_SETLK 37
diff --git a/init/Kconfig b/init/Kconfig
index e84c6423a2e5..19e94edc0ac8 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -848,8 +848,8 @@ config LOG_CPU_MAX_BUF_SHIFT
used as it forces an exact (power of two) size of the ring buffer.
The number of possible CPUs is used for this computation ignoring
- hotplugging making the compuation optimal for the the worst case
- scenerio while allowing a simple algorithm to be used from bootup.
+ hotplugging making the computation optimal for the worst case
+ scenario while allowing a simple algorithm to be used from bootup.
Examples shift values and their meaning:
17 => 128 KB for each CPU
diff --git a/init/main.c b/init/main.c
index bb1aed928f21..ceb26e85e416 100644
--- a/init/main.c
+++ b/init/main.c
@@ -512,7 +512,7 @@ asmlinkage __visible void __init start_kernel(void)
debug_objects_early_init();
/*
- * Set up the the initial canary ASAP:
+ * Set up the initial canary ASAP:
*/
boot_init_stack_canary();
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 9019f15deab2..6e82ca9e2735 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -17,7 +17,7 @@
#ifdef HAVE_JUMP_LABEL
-/* mutex to protect coming/going of the the jump_label table */
+/* mutex to protect coming/going of the jump_label table */
static DEFINE_MUTEX(jump_label_mutex);
void jump_label_lock(void)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 1ce770687ea8..8cd9ce2a6bcc 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2878,7 +2878,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
- * with as many of the the *youngest* kmsg records that fit into it.
+ * with as many of the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
diff --git a/kernel/smp.c b/kernel/smp.c
index aff8aa14f547..c6174667d632 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -622,7 +622,7 @@ EXPORT_SYMBOL(on_each_cpu_mask);
* for all the required CPUs to finish. This may include the local
* processor.
* @cond_func: A callback function that is passed a cpu id and
- * the the info parameter. The function is called
+ * the info parameter. The function is called
* with preemption disabled. The function should
* return a blooean value indicating whether to IPI
* the specified CPU.
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index b38fb2b9e237..612b68cd4599 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2881,7 +2881,7 @@ rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
* This function lets the user discard an event in the ring buffer
* and then that event will not be read later.
*
- * This function only works if it is called before the the item has been
+ * This function only works if it is called before the item has been
* committed. It will try to free the event from the ring buffer
* if another event has not been added behind it.
*
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 1e031f2c9aba..6a76a7f29c3f 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -884,7 +884,7 @@ EXPORT_SYMBOL(bitmap_bitremap);
* read it, you're overqualified for your current job.)
*
* In other words, @orig is mapped onto (surjectively) @dst,
- * using the the map { <n, m> | the n-th bit of @relmap is the
+ * using the map { <n, m> | the n-th bit of @relmap is the
* m-th set bit of @relmap }.
*
* Any set bits in @orig above bit number W, where W is the
diff --git a/lib/dynamic_queue_limits.c b/lib/dynamic_queue_limits.c
index 0777c5a45fa0..2ad6fc394f07 100644
--- a/lib/dynamic_queue_limits.c
+++ b/lib/dynamic_queue_limits.c
@@ -60,7 +60,7 @@ void dql_completed(struct dql *dql, unsigned int count)
* the whole interval (the check above).
*
* If there is slack, the amount of execess data queued above
- * the the amount needed to prevent starvation, the queue limit
+ * the amount needed to prevent starvation, the queue limit
* can be decreased. To avoid hysteresis we consider the
* minimum amount of slack found over several iterations of the
* completion routine.
diff --git a/lib/earlycpio.c b/lib/earlycpio.c
index 3eb3e4722b8e..9d4da0a6a6ed 100644
--- a/lib/earlycpio.c
+++ b/lib/earlycpio.c
@@ -50,7 +50,7 @@ enum cpio_fields {
/**
* cpio_data find_cpio_data - Search for files in an uncompressed cpio
* @path: The directory to search for, including a slash at the end
- * @data: Pointer to the the cpio archive or a header inside
+ * @data: Pointer to the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @nextoff: When a matching file is found, this is the offset from the
* beginning of the cpio to the beginning of the next file, not the
diff --git a/lib/syscall.c b/lib/syscall.c
index e30e03932480..624d80430969 100644
--- a/lib/syscall.c
+++ b/lib/syscall.c
@@ -31,7 +31,7 @@ static int collect_syscall(struct task_struct *target, long *callno,
* @pc: filled with user PC
*
* If @target is blocked in a system call, returns zero with *@callno
- * set to the the call's number and @args filled in with its arguments.
+ * set to the call's number and @args filled in with its arguments.
* Registers not used for system call arguments may not be available and
* it is not kosher to use &struct user_regset calls while the system
* call is still in progress. Note we may get this result if @target
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index eeceeeb09019..fdd76586e1a4 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1308,7 +1308,7 @@ static void return_unused_surplus_pages(struct hstate *h,
* evenly across all nodes with memory. Iterate across these nodes
* until we can no longer free unreserved surplus pages. This occurs
* when the nodes with surplus pages have no free pages.
- * free_pool_huge_page() will balance the the freed pages across the
+ * free_pool_huge_page() will balance the freed pages across the
* on-line nodes with memory and will handle the hstate accounting.
*/
while (nr_pages--) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 18cee0d4c8a2..c9c9b33608f3 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4222,7 +4222,7 @@ static int zone_batchsize(struct zone *zone)
* locking.
*
* Any new users of pcp->batch and pcp->high should ensure they can cope with
- * those fields changing asynchronously (acording the the above rule).
+ * those fields changing asynchronously (according to the above rule).
*
* mutex_is_locked(&pcp_batch_high_lock) required when calling this function
* outside of boot time (or some other assurance that no concurrent updaters
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index faff6247ac8f..9f4c71ba8dd1 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -966,7 +966,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
return 0;
}
-/* Encrypt the the link */
+/* Encrypt the link */
static void hci_conn_encrypt(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 1d9c29a00568..5b2b17522561 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1674,7 +1674,7 @@ static void hci_init3_req(struct hci_request *req, unsigned long opt)
* Delete Stored Link Key command. They are clearly indicating its
* absence in the bit mask of supported commands.
*
- * Check the supported commands and only if the the command is marked
+ * Check the supported commands and only if the command is marked
* as supported send it. If not supported assume that the controller
* does not have actual support for stored link keys which makes this
* command redundant anyway.
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index a88b8524846e..9d83a2e05baf 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1349,7 +1349,7 @@ static void sctp_select_active_and_retran_path(struct sctp_association *asoc)
}
/* We did not find anything useful for a possible retransmission
- * path; either primary path that we found is the the same as
+ * path; either primary path that we found is the same as
* the current one, or we didn't generally find an active one.
*/
if (trans_sec == NULL)
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index 158701da2d31..f0424e16beb7 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -199,7 +199,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3;
max = asoc->frag_point;
- /* If the the peer requested that we authenticate DATA chunks
+ /* If the peer requested that we authenticate DATA chunks
* we need to account for bundling of the AUTH chunks along with
* DATA.
*/
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 6f6b829c9e8e..1ef370a9f675 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -190,7 +190,7 @@ void rpc_destroy_generic_auth(void)
}
/*
- * Test the the current time (now) against the underlying credential key expiry
+ * Test the current time (now) against the underlying credential key expiry
* minus a timeout and setup notification.
*
* The normal case:
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 403078d670a9..b21863009913 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
* @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
* %WIMAX_RF_OFF radio off.
*
- * Reports changes in the software RF switch state to the the WiMAX
+ * Reports changes in the software RF switch state to the WiMAX
* stack.
*
* The main use is during initialization, so the driver can query the
diff --git a/scripts/coccinelle/misc/badty.cocci b/scripts/coccinelle/misc/badty.cocci
index 2fc06fc71927..7bde383f577b 100644
--- a/scripts/coccinelle/misc/badty.cocci
+++ b/scripts/coccinelle/misc/badty.cocci
@@ -3,7 +3,7 @@
//# This makes an effort to find cases where the argument to sizeof is wrong
//# in memory allocation functions by checking the type of the allocated memory
//# when it is a double pointer and ensuring the sizeof argument takes a pointer
-//# to the the memory being allocated. There are false positives in cases the
+//# to the memory being allocated. There are false positives in cases the
//# sizeof argument is not used in constructing the return value. The result
//# may need some reformatting.
//
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index db40fa04cd51..9eb8c74b69a1 100644
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in
kernel/trace/trace_functions.c
The resulted trace is processed into a tree to produce a more human
view of the call stack by drawing textual but hierarchical tree of
-calls. Only the functions's names and the the call time are provided.
+calls. Only the functions's names and the call time are provided.
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
index 3064c6ced87c..7b9769e7985a 100644
--- a/security/apparmor/context.c
+++ b/security/apparmor/context.c
@@ -13,7 +13,7 @@
* License.
*
*
- * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * AppArmor sets confinement on every task, via the aa_task_cxt and
* the aa_task_cxt.profile, both of which are required and are not allowed
* to be NULL. The aa_task_cxt is not reference counted and is unique
* to each cred (which is reference count). The profile pointed to by
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index e26f860e5f2e..112d40974504 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -474,7 +474,7 @@ error:
* keyring, otherwise replace the link to the matching key with a link to the
* new key.
*
- * The key must grant the caller Link permission and the the keyring must grant
+ * The key must grant the caller Link permission and the keyring must grant
* the caller Write permission. Furthermore, if an additional link is created,
* the keyring's quota will be extended.
*
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index ec6a7d0d1886..e3ecc7538f8e 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -5110,7 +5110,7 @@ EXPORT_SYMBOL_GPL(snd_hda_power_save);
* @nid: NID to check / update
*
* Check whether the given NID is in the amp list. If it's in the list,
- * check the current AMP status, and update the the power-status according
+ * check the current AMP status, and update the power-status according
* to the mute status.
*
* This function is supposed to be set or called from the check_power_status
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 98cd1908c039..f193b73de0f2 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -887,7 +887,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec,
static struct snd_kcontrol_new beep_vol_ctl =
HDA_CODEC_VOLUME(NULL, 0, 0, 0);
- /* check for mute support for the the amp */
+ /* check for mute support for the amp */
if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
const struct snd_kcontrol_new *temp;
if (spec->anabeep_nid == nid)
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index f3b491aa3e22..df5cb3b4b6e2 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -31,7 +31,7 @@
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
- * sampling rate. That means the the FPGA doubles the
+ * sampling rate. That means that the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index bddee30a4bc7..eaac777ee91d 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -694,7 +694,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int source)
u64 Kpart;
unsigned int K, Ndiv, Nmod, target;
- /* The the PLL output is always 98.304MHz. */
+ /* The PLL output is always 98.304MHz. */
target = 98304000;
/* If the input frequency is over 14.4MHz then scale it down. */
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index a609aafc994d..3c1c7b71e69b 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -164,7 +164,7 @@ static void fsl_dma_abort_stream(struct snd_pcm_substream *substream)
/**
* fsl_dma_update_pointers - update LD pointers to point to the next period
*
- * As each period is completed, this function changes the the link
+ * As each period is completed, this function changes the link
* descriptor pointers for that period to point to the next period.
*/
static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private)
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index b2c3d0d5dca3..8dc8cc9b8348 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -615,7 +615,7 @@ A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. The DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index b3b8abae62b8..6acad619044b 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -196,7 +196,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
- period being the hist entry period value
- - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option
+ - WEIGHT-A/WEIGHT-B being user suplied weights in the '-c' option
behind ':' separator like '-c wdiff:1,2'.
- WIEGHT-A being the weight of the data file
- WIEGHT-B being the weight of the baseline data file
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index 56bfb523c5bb..6940d8849434 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -35,9 +35,9 @@ The \fB-c MSR#\fP option includes the delta of the specified 32-bit MSR counter.
.PP
The \fB-C MSR#\fP option includes the delta of the specified 64-bit MSR counter.
.PP
-The \fB-m MSR#\fP option includes the the specified 32-bit MSR value.
+The \fB-m MSR#\fP option includes the specified 32-bit MSR value.
.PP
-The \fB-M MSR#\fP option includes the the specified 64-bit MSR value.
+The \fB-M MSR#\fP option includes the specified 64-bit MSR value.
.PP
The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
The default is 5 seconds.
diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
index fd7e9e9d6f4a..1aa7faa0e0e0 100644
--- a/tools/thermal/tmon/pid.c
+++ b/tools/thermal/tmon/pid.c
@@ -38,7 +38,7 @@
/**************************************************************************
* PID (Proportional-Integral-Derivative) controller is commonly used in
- * linear control system, consider the the process.
+ * linear control system, consider the process.
* G(s) = U(s)/E(s)
* kp = proportional gain
* ki = integral gain
--
1.9.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-02 19:24 ` Michael Opdenacker
@ 2014-10-02 20:00 ` Randy Dunlap
2014-10-02 20:06 ` Joe Perches
2014-10-02 20:07 ` Michael Opdenacker
0 siblings, 2 replies; 35+ messages in thread
From: Randy Dunlap @ 2014-10-02 20:00 UTC (permalink / raw)
To: Michael Opdenacker, trivial, joe, akpm, arend, gregkh; +Cc: linux-kernel
One more then I'm done.
Thanks.
On 10/02/14 12:24, Michael Opdenacker wrote:
> diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
> index 82bbfa5a05b3..ccadbfd6645e 100644
> --- a/arch/xtensa/kernel/entry.S
> +++ b/arch/xtensa/kernel/entry.S
> @@ -384,7 +384,7 @@ common_exception:
> /* Save optional registers. */
>
> save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
> -
> +
> #ifdef CONFIG_TRACE_IRQFLAGS
> l32i a4, a1, PT_DEPC
> /* Double exception means we came here with an exception
> @@ -433,7 +433,7 @@ common_exception_return:
> * We need to check some flags for signal handling and rescheduling,
> * and have to restore WB and WS, extra states, and all registers
> * in the register file that were in use in the user task.
> - * Note that we don't disable interrupts here.
> + * Note that we don't disable interrupts here.
> */
>
> _bbsi.l a4, TIF_NEED_RESCHED, 3f
> @@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
> * of the proper size instead.
> *
> * This algorithm simply backs out the register changes started by the user
> - * excpetion handler, makes it appear that we have started a window underflow
> + * exception handler, makes it appear that we have started a window underflow
> * by rotating the window back and then setting the old window base (OWB) in
> * the 'ps' register with the rolled back window base. The 'movsp' instruction
> * will be re-executed and this time since the next window frames is in the
> * active AR registers it won't cause an exception.
> *
> * If the WindowUnderflow code gets a TLB miss the page will get mapped
> - * the the partial windeowUnderflow will be handeled in the double exception
> + * and the partial windeowUnderflow will be handled in the double exception
windowUnderflow
> * handler.
> *
> * Entry condition:
--
~Randy
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-02 20:00 ` Randy Dunlap
@ 2014-10-02 20:06 ` Joe Perches
2014-10-02 20:11 ` Michael Opdenacker
2014-10-02 20:07 ` Michael Opdenacker
1 sibling, 1 reply; 35+ messages in thread
From: Joe Perches @ 2014-10-02 20:06 UTC (permalink / raw)
To: Randy Dunlap
Cc: Michael Opdenacker, trivial, akpm, arend, gregkh, linux-kernel
On Thu, 2014-10-02 at 13:00 -0700, Randy Dunlap wrote:
> One more then I'm done.
[]
> On 10/02/14 12:24, Michael Opdenacker wrote:
[]
> > diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
[]
> > @@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
> > * of the proper size instead.
> > *
> > * This algorithm simply backs out the register changes started by the user
> > - * excpetion handler, makes it appear that we have started a window underflow
> > + * exception handler, makes it appear that we have started a window underflow
> > * by rotating the window back and then setting the old window base (OWB) in
> > * the 'ps' register with the rolled back window base. The 'movsp' instruction
> > * will be re-executed and this time since the next window frames is in the
> > * active AR registers it won't cause an exception.
> > *
> > * If the WindowUnderflow code gets a TLB miss the page will get mapped
> > - * the the partial windeowUnderflow will be handeled in the double exception
> > + * and the partial windeowUnderflow will be handled in the double exception
>
> windowUnderflow
I think both of these might be better as "window underflow"
as it's used in the second line of the previous paragraph.
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-02 20:00 ` Randy Dunlap
2014-10-02 20:06 ` Joe Perches
@ 2014-10-02 20:07 ` Michael Opdenacker
1 sibling, 0 replies; 35+ messages in thread
From: Michael Opdenacker @ 2014-10-02 20:07 UTC (permalink / raw)
To: Randy Dunlap, trivial, joe, akpm, arend, gregkh
Cc: linux-kernel, Michael Opdenacker
On 10/02/2014 10:00 PM, Randy Dunlap wrote:
>> diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
>> index 82bbfa5a05b3..ccadbfd6645e 100644
>> --- a/arch/xtensa/kernel/entry.S
>> +++ b/arch/xtensa/kernel/entry.S
>> @@ -384,7 +384,7 @@ common_exception:
>> /* Save optional registers. */
>>
>> save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
>> -
>> +
>> #ifdef CONFIG_TRACE_IRQFLAGS
>> l32i a4, a1, PT_DEPC
>> /* Double exception means we came here with an exception
>> @@ -433,7 +433,7 @@ common_exception_return:
>> * We need to check some flags for signal handling and rescheduling,
>> * and have to restore WB and WS, extra states, and all registers
>> * in the register file that were in use in the user task.
>> - * Note that we don't disable interrupts here.
>> + * Note that we don't disable interrupts here.
>> */
>>
>> _bbsi.l a4, TIF_NEED_RESCHED, 3f
>> @@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
>> * of the proper size instead.
>> *
>> * This algorithm simply backs out the register changes started by the user
>> - * excpetion handler, makes it appear that we have started a window underflow
>> + * exception handler, makes it appear that we have started a window underflow
>> * by rotating the window back and then setting the old window base (OWB) in
>> * the 'ps' register with the rolled back window base. The 'movsp' instruction
>> * will be re-executed and this time since the next window frames is in the
>> * active AR registers it won't cause an exception.
>> *
>> * If the WindowUnderflow code gets a TLB miss the page will get mapped
>> - * the the partial windeowUnderflow will be handeled in the double exception
>> + * and the partial windeowUnderflow will be handled in the double exception
> windowUnderflow
Great, new patch ready on the launch site!
Thanks,
Mike.
--
Michael Opdenacker, CEO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
+33 484 258 098
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-02 19:18 ` Michael Opdenacker
2014-10-02 19:24 ` Michael Opdenacker
@ 2014-10-02 20:07 ` Michael Opdenacker
1 sibling, 0 replies; 35+ messages in thread
From: Michael Opdenacker @ 2014-10-02 20:07 UTC (permalink / raw)
To: rdunlap, trivial, joe, akpm, arend, gregkh
Cc: linux-kernel, Michael Opdenacker
Fix all occurrences of "the the ", and occasionally "in in ",
in the source code, comments and documentation.
The replacement couldn't be automated because sometimes
the first "the" was meant to be another word.
Example: "according the the"
meaning: "according to the"
Note that I sometimes took the opportunity to fix
other spelling issues or typos in the same sentences,
and to reformat some comments impacted by the changes.
I also fixed a few checkpatch errors in the same
lines, but not all of them (should be addressed by
separate patches).
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Reviewed-by: rdunlap@infradead.org
---
Documentation/ABI/testing/sysfs-devices-memory | 2 +-
Documentation/DocBook/media/v4l/controls.xml | 2 +-
Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
Documentation/devicetree/bindings/arm/msm/timer.txt | 2 +-
.../devicetree/bindings/ata/cavium-compact-flash.txt | 2 +-
Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt | 2 +-
Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt | 2 +-
Documentation/devicetree/bindings/mtd/fsmc-nand.txt | 2 +-
.../devicetree/bindings/net/broadcom-systemport.txt | 2 +-
Documentation/filesystems/autofs4-mount-control.txt | 4 ++--
Documentation/phy.txt | 2 +-
Documentation/vm/unevictable-lru.txt | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/unwind.h | 2 +-
arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
arch/arm/mach-pxa/stargate2.c | 2 +-
arch/arm64/crypto/aes-neon.S | 2 +-
arch/blackfin/mach-common/entry.S | 2 +-
arch/c6x/platforms/cache.c | 2 +-
arch/ia64/include/asm/spinlock.h | 2 +-
arch/ia64/include/asm/uv/uv_hub.h | 2 +-
arch/m68k/platform/coldfire/intc-2.c | 2 +-
arch/metag/kernel/process.c | 2 +-
arch/microblaze/kernel/entry.S | 2 +-
arch/mips/alchemy/devboards/pm.c | 2 +-
arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
arch/mips/include/asm/spinlock.h | 2 +-
arch/mips/kvm/mips.c | 2 +-
arch/mips/mm/c-octeon.c | 4 ++--
arch/mips/netlogic/xlr/fmn.c | 2 +-
arch/powerpc/include/asm/cache.h | 2 +-
arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
arch/powerpc/kernel/head_64.S | 2 +-
arch/powerpc/mm/gup.c | 2 +-
arch/powerpc/mm/hugetlbpage.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/platforms/chrp/setup.c | 2 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
arch/s390/kernel/perf_cpum_sf.c | 2 +-
arch/s390/mm/gup.c | 2 +-
arch/sparc/kernel/pci.c | 2 +-
arch/sparc/mm/gup.c | 2 +-
arch/tile/include/asm/irqflags.h | 2 +-
arch/tile/include/gxio/trio.h | 2 +-
arch/tile/kernel/single_step.c | 2 +-
arch/x86/include/asm/spinlock.h | 2 +-
arch/x86/include/asm/uv/uv_hub.h | 2 +-
arch/x86/kvm/x86.c | 2 +-
arch/x86/mm/gup.c | 4 ++--
arch/x86/xen/setup.c | 2 +-
arch/xtensa/include/asm/initialize_mmu.h | 2 +-
arch/xtensa/kernel/entry.S | 12 ++++++------
crypto/asymmetric_keys/pkcs7_parser.h | 2 +-
drivers/acpi/acpica/accommon.h | 2 +-
drivers/acpi/acpica/tbfadt.c | 2 +-
drivers/char/apm-emulation.c | 2 +-
drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
drivers/cpuidle/driver.c | 2 +-
drivers/crypto/picoxcell_crypto.c | 2 +-
drivers/crypto/ux500/hash/hash_core.c | 2 +-
drivers/gpio/gpio-ich.c | 2 +-
drivers/gpio/gpio-sch.c | 4 ++--
drivers/gpu/drm/drm_mm.c | 4 ++--
drivers/gpu/drm/i915/i915_gem.c | 2 +-
drivers/gpu/drm/i915/i915_gem_userptr.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 4 ++--
drivers/gpu/drm/radeon/atombios.h | 4 ++--
drivers/gpu/drm/radeon/r300_reg.h | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 2 +-
drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
drivers/gpu/drm/radeon/radeon_vm.c | 4 ++--
drivers/hv/channel.c | 4 ++--
drivers/hv/vmbus_drv.c | 4 ++--
drivers/hwmon/pmbus/ucd9200.c | 2 +-
drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
drivers/infiniband/hw/qib/qib.h | 2 +-
drivers/input/mouse/gpio_mouse.c | 2 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
drivers/lguest/core.c | 2 +-
drivers/media/dvb-frontends/tda1002x.h | 2 +-
drivers/media/dvb-frontends/tda10048.c | 2 +-
drivers/media/pci/cx88/cx88-dsp.c | 2 +-
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/saa7164/saa7164-core.c | 2 +-
drivers/media/platform/davinci/vpbe.c | 2 +-
drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
drivers/media/usb/dvb-usb/friio.c | 2 +-
drivers/media/usb/dvb-usb/friio.h | 2 +-
drivers/media/usb/gspca/finepix.c | 2 +-
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 2 +-
drivers/memory/emif.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/mfd/db8500-prcmu.c | 2 +-
drivers/misc/mic/bus/mic_bus.c | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/ubi/ubi.h | 4 ++--
drivers/mtd/ubi/wl.c | 2 +-
drivers/net/can/xilinx_can.c | 2 +-
drivers/net/ethernet/calxeda/xgmac.c | 2 +-
drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
drivers/net/wimax/i2400m/i2400m.h | 4 ++--
drivers/net/wimax/i2400m/rx.c | 2 +-
drivers/net/wimax/i2400m/tx.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/wcn36xx/hal.h | 8 ++++----
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++--
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 ++--
drivers/net/wireless/mwifiex/debugfs.c | 2 +-
drivers/net/wireless/rsi/rsi_91x_sdio.c | 4 ++--
drivers/net/wireless/ti/wl1251/acx.h | 2 +-
drivers/of/base.c | 2 +-
drivers/pci/hotplug/acpiphp_glue.c | 2 +-
drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 2 +-
drivers/pinctrl/pinctrl-at91.c | 2 +-
drivers/power/power_supply_sysfs.c | 5 +++--
drivers/rtc/rtc-rs5c372.c | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 6 +++---
drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++--
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/remote_device.h | 2 +-
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/spi/spi-ppc4xx.c | 2 +-
drivers/staging/android/ion/ion.c | 2 +-
drivers/staging/android/uapi/binder.h | 2 +-
drivers/staging/et131x/et131x.c | 2 +-
drivers/staging/lustre/lustre/llite/file.c | 2 +-
drivers/staging/lustre/lustre/ptlrpc/pinger.c | 2 +-
drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/rtl8712/rtl871x_cmd.c | 2 +-
drivers/staging/rtl8723au/core/rtw_cmd.c | 2 +-
.../staging/unisys/common-spar/include/channels/iochannel.h | 4 ++--
.../unisys/common-spar/include/channels/vbuschannel.h | 6 +++---
drivers/staging/unisys/virtpci/virtpci.c | 2 +-
drivers/target/target_core_alua.c | 2 +-
drivers/thunderbolt/ctl.h | 2 +-
drivers/usb/host/max3421-hcd.c | 3 +--
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/mos7720.c | 2 +-
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/uwb/drp-ie.c | 2 +-
drivers/video/fbdev/omap/sossi.c | 2 +-
drivers/video/fbdev/sis/sis_accel.c | 2 +-
fs/autofs4/dev-ioctl.c | 2 +-
fs/btrfs/dev-replace.c | 2 +-
fs/btrfs/send.c | 2 +-
fs/btrfs/tree-log.c | 2 +-
fs/dcache.c | 4 ++--
fs/ecryptfs/keystore.c | 2 +-
fs/ext2/ext2.h | 2 +-
fs/ext4/inline.c | 4 ++--
fs/f2fs/segment.h | 2 +-
fs/kernfs/file.c | 2 +-
fs/ocfs2/localalloc.c | 2 +-
fs/xfs/xfs_export.c | 2 +-
include/drm/drm_rect.h | 2 +-
include/linux/mic_bus.h | 2 +-
include/linux/mm.h | 2 +-
include/linux/moduleparam.h | 2 +-
include/linux/skbuff.h | 2 +-
include/net/caif/caif_layer.h | 2 +-
include/net/ip6_fib.h | 2 +-
include/net/wimax.h | 2 +-
include/uapi/asm-generic/fcntl.h | 2 +-
init/Kconfig | 4 ++--
init/main.c | 2 +-
kernel/jump_label.c | 2 +-
kernel/printk/printk.c | 2 +-
kernel/smp.c | 2 +-
kernel/trace/ring_buffer.c | 2 +-
lib/bitmap.c | 2 +-
lib/dynamic_queue_limits.c | 2 +-
lib/earlycpio.c | 2 +-
lib/syscall.c | 2 +-
mm/hugetlb.c | 2 +-
mm/page_alloc.c | 2 +-
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/hci_core.c | 2 +-
net/sctp/associola.c | 2 +-
net/sctp/chunk.c | 2 +-
net/sunrpc/auth_generic.c | 2 +-
net/wimax/op-rfkill.c | 2 +-
scripts/coccinelle/misc/badty.cocci | 2 +-
scripts/tracing/draw_functrace.py | 2 +-
security/apparmor/context.c | 2 +-
security/keys/keyctl.c | 2 +-
sound/pci/hda/hda_codec.c | 2 +-
sound/pci/hda/patch_sigmatel.c | 2 +-
sound/pci/ice1712/prodigy192.c | 2 +-
sound/soc/codecs/wm9713.c | 2 +-
sound/soc/fsl/fsl_dma.c | 2 +-
sound/sparc/dbri.c | 2 +-
tools/perf/Documentation/perf-diff.txt | 2 +-
tools/power/x86/turbostat/turbostat.8 | 4 ++--
tools/thermal/tmon/pid.c | 2 +-
225 files changed, 266 insertions(+), 266 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index 7405de26ee60..4b3c0208d0a5 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -45,7 +45,7 @@ Description:
The file /sys/devices/system/memory/memoryX/state
is read-write. When read, its contents show the
online/offline state of the memory section. When written,
- root can toggle the the online/offline state of a removable
+ root can toggle the online/offline state of a removable
memory section (see removable file description above)
using the following commands.
# echo online > /sys/devices/system/memory/memoryX/state
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 9f5ffd85560b..a232065a7c6a 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3415,7 +3415,7 @@ giving priority to the center of the metered area.</entry>
<row>
<entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant> </entry>
<entry>A multi-zone metering. The light intensity is measured
-in several points of the frame and the the results are combined. The
+in several points of the frame and the results are combined. The
algorithm of the zones selection and their significance in calculating the
final value is device dependent.</entry>
</row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
index f4e28e7d4751..721728745407 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
@@ -267,7 +267,7 @@ is intended for still imaging applications. The idea is to get the
best possible image quality that the hardware can deliver. It is not
defined how the driver writer may achieve that; it will depend on the
hardware and the ingenuity of the driver writer. High quality mode is
-a different mode from the the regular motion video capture modes. In
+a different mode from the regular motion video capture modes. In
high quality mode:<itemizedlist>
<listitem>
<para>The driver may be able to capture higher
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
index c6ef8f13dc7e..74607b6c1117 100644
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -8,7 +8,7 @@ Properties:
"qcom,kpss-timer" - krait subsystem
"qcom,scss-timer" - scorpion subsystem
-- interrupts : Interrupts for the the debug timer, the first general purpose
+- interrupts : Interrupts for the debug timer, the first general purpose
timer, and optionally a second general purpose timer in that
order.
diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
index 93986a5a8018..3bacc8e0931e 100644
--- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
+++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -9,7 +9,7 @@ Properties:
Compatibility with many Cavium evaluation boards.
-- reg: The base address of the the CF chip select banks. Depending on
+- reg: The base address of the CF chip select banks. Depending on
the device configuration, there may be one or two banks.
- cavium,bus-width: The width of the connection to the CF devices. Valid
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
index d63194a2c848..ada4e2973323 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
@@ -39,7 +39,7 @@ Optional Properties:
- lines-initial-states: Bitmask that specifies the initial state of each
line. When a bit is set to zero, the corresponding line will be initialized to
the input (pulled-up) state. When the bit is set to one, the line will be
- initialized the the low-level output state. If the property is not specified
+ initialized the low-level output state. If the property is not specified
all lines will be initialized to the input state.
The I/O expander can detect input state changes, and thus optionally act as
diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
index d9ee909d2b78..d71258e2d456 100644
--- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
@@ -59,7 +59,7 @@ Optional properties:
Each child node represents one channel and has the following
properties:
Required properties:
- * reg: Pair of pins the the channel is connected to.
+ * reg: Pair of pins the channel is connected to.
0: VP/VN
1: VAUXP[0]/VAUXN[0]
2: VAUXP[1]/VAUXN[1]
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index ec42935f3908..5235cbc551b0 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -9,7 +9,7 @@ Required properties:
Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width
defaults to 1 byte
-- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+- nand-skip-bbtscan: Indicates the BBT scanning should be skipped
- timings: array of 6 bytes for NAND timings. The meanings of these bytes
are:
byte 0 TCLR : CLE to RE delay in number of AHB clock cycles, only 4 bits
diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
index aa7ad622259d..877da34145b0 100644
--- a/Documentation/devicetree/bindings/net/broadcom-systemport.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
@@ -3,7 +3,7 @@
Required properties:
- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the the rx
+- interrupts: interrupts for the device, first cell must be for the rx
interrupts, and the second cell should be for the transmit queues. An
optional third interrupt cell for Wake-on-LAN can be specified
- local-mac-address: Ethernet MAC address (48 bits) of this adapter
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index aff22113a986..e54896427b4a 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -373,7 +373,7 @@ variation uses the path and optionally arg1 set to an autofs mount type.
The call returns 1 if this is a mount point and sets arg1 to the device
number of the mount and field arg2 to the relevant super block magic
number (described below) or 0 if it isn't a mountpoint. In both cases
-the the device number (as returned by new_encode_dev()) is returned
+the device number (as returned by new_encode_dev()) is returned
in field arg1.
If supplied with a file descriptor we're looking for a specific mount,
@@ -387,7 +387,7 @@ is one or 0 if it isn't a mountpoint.
If a path is supplied (and the ioctlfd field is set to -1) then the path
is looked up and is checked to see if it is the root of a mount. If a
type is also given we are looking for a particular autofs mount and if
-a match isn't found a fail is returned. If the the located path is the
+a match isn't found a fail is returned. If the located path is the
root of a mount 1 is returned along with the super magic of the mount
or 0 otherwise.
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index c6594af94d25..27fb3656ec8e 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -87,7 +87,7 @@ should contain the phy name as given in the dt data and in the case of
non-dt boot, it should contain the label of the PHY. The two
devm_phy_get associates the device with the PHY using devres on
successful PHY get. On driver detach, release function is invoked on
-the the devres data and devres data is freed. phy_optional_get and
+the devres data and devres data is freed. phy_optional_get and
devm_phy_optional_get should be used when the phy is optional. These
two functions will never return -ENODEV, but instead returns NULL when
the phy cannot be found.
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index 744f82f86c58..441dd2266531 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -453,7 +453,7 @@ putback_lru_page() function to add migrated pages back to the LRU.
mmap(MAP_LOCKED) SYSTEM CALL HANDLING
-------------------------------------
-In addition the mlock()/mlockall() system calls, an application can request
+In addition to the mlock()/mlockall() system calls, an application can request
that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 32cbbd565902..df27c39b2488 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1909,7 +1909,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
+ appended to the device tree bootargs property.
endchoice
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index d1c3f3a71c94..4f697edd0bad 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -22,7 +22,7 @@
#ifndef __ASSEMBLY__
-/* Unwind reason code according the the ARM EABI documents */
+/* Unwind reason code according to the ARM EABI documents */
enum unwind_reason_code {
URC_OK = 0, /* operation completed successfully */
URC_CONTINUE_UNWIND = 8,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 9e91a4e7519a..300bd6c004de 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -753,7 +753,7 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
}
/**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * _init_main_clk - get a struct clk * for the hwmod's main functional clk
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
@@ -791,7 +791,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
}
/**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
@@ -835,7 +835,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
}
/**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 01de542432a6..6f92e75b6c35 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -423,7 +423,7 @@ static void __init imote2_stargate2_init(void)
}
#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
+/* As the imote2 doesn't currently have a conventional SD slot
* there is no option to hotplug cards, making all this rather simple
*/
static int imote2_mci_get_ro(struct device *dev)
diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S
index b93170e1cc93..d0f01cff23b3 100644
--- a/arch/arm64/crypto/aes-neon.S
+++ b/arch/arm64/crypto/aes-neon.S
@@ -47,7 +47,7 @@
prepare .LReverse_Sbox, .LReverse_ShiftRows, \temp
.endm
- /* apply SubBytes transformation using the the preloaded Sbox */
+ /* apply SubBytes transformation using the preloaded Sbox */
.macro sub_bytes, in
sub v9.16b, \in\().16b, v12.16b
tbl \in\().16b, {v16.16b-v19.16b}, \in\().16b
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 86b5a095c5a1..9c8612385e00 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -480,7 +480,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
#ifdef CONFIG_EXACT_HWERR
/* Make sure all pending read/writes complete. This will ensure any
* accesses which could cause hardware errors completes, and signal
- * the the hardware before we do something silly, like crash the
+ * the hardware before we do something silly, like crash the
* kernel. We don't need to work around anomaly 05000312, since
* we are already atomic
*/
diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c
index 86318a16a252..dc21f94aaaaf 100644
--- a/arch/c6x/platforms/cache.c
+++ b/arch/c6x/platforms/cache.c
@@ -437,7 +437,7 @@ void __init c6x_cache_init(void)
if (!cache_base)
return;
- /* Set L2 caches on the the whole L2 SRAM memory */
+ /* Set L2 caches on the whole L2 SRAM memory */
L2_cache_set_mode(L2MODE_SIZE);
/* Enable L1 */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 45698cd15b7b..bd6ea40f3ef9 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -23,7 +23,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
* The pad bits in the middle are used to prevent the next_ticket number
* overflowing into the now_serving number.
*
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index 53e9dfacd073..3ea4168f28f7 100644
--- a/arch/ia64/include/asm/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -257,7 +257,7 @@ static inline int uv_numa_blade_id(void)
return 0;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return 0;
diff --git a/arch/m68k/platform/coldfire/intc-2.c b/arch/m68k/platform/coldfire/intc-2.c
index 995093357c59..f74f0e473119 100644
--- a/arch/m68k/platform/coldfire/intc-2.c
+++ b/arch/m68k/platform/coldfire/intc-2.c
@@ -7,7 +7,7 @@
* family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
* controllers, and the 547x and 548x families which have only one of them.
*
- * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * The external 7 fixed interrupts are part of the Edge Port unit of these
* ColdFire parts. They can be configured as level or edge triggered.
*
* (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff986a23..30052da1f1a4 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -211,7 +211,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
/*
* Get a pointer to where the new child's register block should have
* been pushed.
- * The Meta's stack grows upwards, and the context is the the first
+ * The Meta's stack grows upwards, and the context is the first
* thing to be pushed by TBX (phew)
*/
*childregs = *current_pt_regs();
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 0536bc021cc6..b417be09196d 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -445,7 +445,7 @@ TRAP_return: /* Make global symbol for debugging */
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look like the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index bfeb8f3c0be6..203767dbeb64 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -16,7 +16,7 @@
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
* is to trigger a wakeup.
*/
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index df69bfd2b006..4ec669f5b0d4 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index)
* offsetof() to determine the offsets into packet headers.
* For example, offsetof(ethhdr, protocol) returns the offset
* of the ethernet protocol field. The bitmask selects which
- * bytes to include the the tag, with bit offset X selecting
+ * bytes to include in the tag, with bit offset X selecting
* byte at offset X from the beginning of the packet data.
* @len: Number of bytes to include. Usually this is the sizeof()
* the field.
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index 78d201fb6c87..b6f41f6b6c70 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -31,7 +31,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*/
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index cd7114147ae7..6660ac807d5a 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -1191,7 +1191,7 @@ int __init kvm_mips_init(void)
* requires TLBs. The TLB handling code is statically linked with
* the rest of the kernel (tlb.c) to avoid the possibility of
* double faulting. The issue is that the TLB code references
- * routines that are part of the the KVM module, which are only
+ * routines that are part of the KVM module, which are only
* available once the module is loaded.
*/
kvm_mips_gfn_to_pfn = gfn_to_pfn;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 05b1d7cf9514..1647426364b9 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -350,7 +350,7 @@ static void co_cache_error_call_notifiers(unsigned long val)
}
/*
- * Called when the the exception is recoverable
+ * Called when the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -359,7 +359,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
}
/**
- * Called when the the exception is not recoverable
+ * Called when the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d428e8471eec..1d1eb1e10ae2 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -144,7 +144,7 @@ void xlr_percpu_fmn_init(void)
* For sending FMN messages, we need credits on the destination
* bucket. Program the credits this core has on the 128 possible
* destination buckets.
- * We cannot use a loop here, because the the first argument has
+ * We cannot use a loop here, because the first argument has
* to be a constant integer value.
*/
COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 34a05a1a990b..af6f17b32531 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -52,7 +52,7 @@ static inline void logmpp(u64 x)
/*
* For a snooping icache, we still need a dummy icbi to purge all the
* prefetched instructions from the ifetch buffers. We also need a sync
- * before the icbi to order the the actual stores to memory that might
+ * before the icbi to order the actual stores to memory that might
* have modified instructions with the icbi.
*/
#define PURGE_PREFETCHED_INS \
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index 334459ad145b..b3219b0ca2c4 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -246,7 +246,7 @@ static inline unsigned int ev_int_get_mask(unsigned int interrupt,
* ev_int_eoi - signal the end of interrupt processing
* @interrupt: the interrupt number
*
- * This function signals the end of processing for the the specified
+ * This function signals the end of processing for the specified
* interrupt, which must be the interrupt currently in service. By
* definition, this is also the highest-priority interrupt.
*
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index ac6432d9be46..a18702780733 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -30,7 +30,7 @@ struct arch_hw_breakpoint {
u16 len; /* length of the target data symbol */
};
-/* Note: Don't change the the first 6 bits below as they are in the same order
+/* Note: Don't change the first 6 bits below as they are in the same order
* as the dabr and dabrx.
*/
#define HW_BRK_TYPE_READ 0x01
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index d48125d0c048..01ecece4ca83 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -94,7 +94,7 @@ __secondary_hold_acknowledge:
#ifdef CONFIG_RELOCATABLE
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
- * is used by kexec-tools to keep the the kdump kernel in the
+ * is used by kexec-tools to keep the kdump kernel in the
* crash_kernel region. The loader is responsible for
* observing the alignment requirement.
*/
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index d8746684f606..a97b81d5cfa6 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -168,7 +168,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on powerpc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 7e70ae968e5f..bf66090de7cc 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -933,7 +933,7 @@ void flush_dcache_icache_hugepage(struct page *page)
* (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table
*
* So long as we atomically load page table pointers we are safe against teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 692998244d2c..a2ce00831362 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -9,7 +9,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * This file is a driver for the the General Purpose Timer (gpt) devices
+ * This file is a driver for the General Purpose Timer (gpt) devices
* found on the MPC5200 SoC. Each timer has an IO pin which can be used
* for GPIO or can be used to raise interrupts. The timer function can
* be used independently from the IO pin, or it can be used to control
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 7044fd36197b..864ced973445 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -251,7 +251,7 @@ static void briq_restart(char *cmd)
* Per default, input/output-device points to the keyboard/screen
* If no card is installed, the built-in serial port is used as a fallback.
* But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
- * the the built-in serial node. Instead, a /failsafe node is created.
+ * to the built-in serial node. Instead, a /failsafe node is created.
*/
static void chrp_init_early(void)
{
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index df241b11d4f7..b7bb2977e87a 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1421,7 +1421,7 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
/*
* This function is supposed to be called on basis of PE from top
- * to bottom style. So the the I/O or MMIO segment assigned to
+ * to bottom style. So the I/O or MMIO segment assigned to
* parent PE could be overrided by its child PEs if necessary.
*/
static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index ea0c7b2ef030..a0b4797a296d 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1128,7 +1128,7 @@ static void debug_sample_entry(struct hws_combined_entry *sample,
* combined-sampling data entry consists of a basic- and a diagnostic-sampling
* data entry. The sampling function is determined by the flags in the perf
* event hardware structure. The function always works with a combined-sampling
- * data entry but ignores the the diagnostic portion if it is not available.
+ * data entry but ignores the diagnostic portion if it is not available.
*
* Note that the implementation focuses on basic-sampling data entries and, if
* such an entry is not valid, the entire combined-sampling data entry is
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 639fce464008..2f03d7badf95 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -187,7 +187,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* prevent the pagetables from being freed on s390.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f49478..ef36086d3db1 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -306,7 +306,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
+ * firmware can sample the value before the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index 1aed0432c64b..74ed2d607036 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -189,7 +189,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on sparc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_disable();
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 71af5747874d..f7f64c80c5b2 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -116,7 +116,7 @@
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
* Likewise, INTCTRL_K is removed and re-added during device
- * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * interrupts, as is the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
* to know our current state.
diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h
index df10a662cc25..50a3d5cbad20 100644
--- a/arch/tile/include/gxio/trio.h
+++ b/arch/tile/include/gxio/trio.h
@@ -206,7 +206,7 @@ typedef struct {
/* Initialize a TRIO context.
*
* This function allocates a TRIO "service domain" and maps the MMIO
- * registers into the the caller's VA space.
+ * registers into the caller's VA space.
*
* @param trio_index Which TRIO shim; Gx36 must pass 0.
* @param context Context object to be initialized.
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index de07fa7d1315..c554ffbb50f7 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -277,7 +277,7 @@ P("\n");
/*
* Called after execve() has started the new image. This allows us
- * to reset the info state. Note that the the mmap'ed memory, if there
+ * to reset the info state. Note that the mmap'ed memory, if there
* was any, has already been unmapped by the exec.
*/
void single_step_execve(void)
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index 54f1c8068c02..04266c294db1 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -71,7 +71,7 @@ static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*
* We use an xadd covering *both* parts of the lock, to increment the tail and
* also load the position of the head, which takes care of memory ordering
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index c63e925fd6b7..361144223ed7 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -512,7 +512,7 @@ static inline int uv_numa_blade_id(void)
return uv_hub_info->numa_blade_id;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return uv_cpu_to_blade[cpu];
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 8f1e22d3b286..5dc89fb405be 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7219,7 +7219,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
if (current->mm == kvm->mm) {
/*
* Free memory regions allocated on behalf of userspace,
- * unless the the memory map has changed due to process exit
+ * unless the memory map has changed due to process exit
* or fd copying.
*/
struct kvm_userspace_memory_region mem;
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 207d9aef662d..a1f84cebb9aa 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -288,7 +288,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
@@ -360,7 +360,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_disable();
pgdp = pgd_offset(mm, addr);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 2e555163c2fe..80e25d7659a2 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -472,7 +472,7 @@ char * __init xen_memory_setup(void)
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
- * We tried to make the the memblock_reserve more selective so
+ * We tried to make the memblock_reserve more selective so
* that it would be clear what region is reserved. Sadly we ran
* in the problem wherein on a 64-bit hypervisor with a 32-bit
* initial domain, the pt_base has the cr3 value which is not
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 600781edc8a3..2e1d20d0b71f 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -6,7 +6,7 @@
* For the new V3 MMU we remap the TLB from virtual == physical
* to the standard Linux mapping used in earlier MMU's.
*
- * The the MMU we also support a new configuration register that
+ * In the MMU we also support a new configuration register that
* specifies how the S32C1I instruction operates with the cache
* controller.
*
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 82bbfa5a05b3..7cb1512849e4 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -384,7 +384,7 @@ common_exception:
/* Save optional registers. */
save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
-
+
#ifdef CONFIG_TRACE_IRQFLAGS
l32i a4, a1, PT_DEPC
/* Double exception means we came here with an exception
@@ -433,7 +433,7 @@ common_exception_return:
* We need to check some flags for signal handling and rescheduling,
* and have to restore WB and WS, extra states, and all registers
* in the register file that were in use in the user task.
- * Note that we don't disable interrupts here.
+ * Note that we don't disable interrupts here.
*/
_bbsi.l a4, TIF_NEED_RESCHED, 3f
@@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
* of the proper size instead.
*
* This algorithm simply backs out the register changes started by the user
- * excpetion handler, makes it appear that we have started a window underflow
+ * exception handler, makes it appear that we have started a window underflow
* by rotating the window back and then setting the old window base (OWB) in
* the 'ps' register with the rolled back window base. The 'movsp' instruction
* will be re-executed and this time since the next window frames is in the
* active AR registers it won't cause an exception.
*
* If the WindowUnderflow code gets a TLB miss the page will get mapped
- * the the partial windeowUnderflow will be handeled in the double exception
+ * and the partial windowUnderflow will be handled in the double exception
* handler.
*
* Entry condition:
@@ -1567,8 +1567,8 @@ ENTRY(fast_second_level_miss)
2: /* Special case for cache aliasing.
* We (should) only get here if a clear_user_page, copy_user_page
- * or the aliased cache flush functions got preemptively interrupted
- * by another task. Re-establish temporary mapping to the
+ * or the aliased cache flush functions got preemptively interrupted
+ * by another task. Re-establish temporary mapping to the
* TLBTEMP_BASE areas.
*/
diff --git a/crypto/asymmetric_keys/pkcs7_parser.h b/crypto/asymmetric_keys/pkcs7_parser.h
index d25f4d15370f..31a2ee79dae7 100644
--- a/crypto/asymmetric_keys/pkcs7_parser.h
+++ b/crypto/asymmetric_keys/pkcs7_parser.h
@@ -42,7 +42,7 @@ struct pkcs7_signed_info {
*
* This contains the generated digest of _either_ the Content Data or
* the Authenticated Attributes [RFC2315 9.3]. If the latter, one of
- * the attributes contains the digest of the the Content Data within
+ * the attributes contains the digest of the Content Data within
* it.
*/
struct public_key_signature sig;
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 6f1c616910ac..826a754954f3 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -47,7 +47,7 @@
/*
* Common set of includes for all ACPICA source files.
* We put them here because we don't want to duplicate them
- * in the the source code again and again.
+ * in the source code again and again.
*
* Note: The order of these include files is important.
*/
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 41519a958083..75e61da5d998 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -435,7 +435,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
* The 64-bit X fields are optional extensions to the original 32-bit FADT
* V1.0 fields. Even if they are present in the FADT, they are optional and
* are unused if the BIOS sets them to zero. Therefore, we must copy/expand
- * 32-bit V1.0 fields to the 64-bit X fields if the the 64-bit X field is
+ * 32-bit V1.0 fields to the 64-bit X fields if the 64-bit X field is
* originally zero.
*
* For ACPI 1.0 FADTs (that contain no 64-bit addresses), all 32-bit address
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index dd9dfa15e9d1..d086acf9562f 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -563,7 +563,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
wake_up_interruptible(&apm_waitqueue);
/*
- * Wait for the the suspend_acks_pending variable to drop to
+ * Wait for the suspend_acks_pending variable to drop to
* zero, meaning everybody acked the suspend event (or the
* process was killed.)
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 02225eb19cf6..619f3a30ec55 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -111,7 +111,7 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
}
/**
- * fifo_icap_set_read_size - Set the the size register.
+ * fifo_icap_set_read_size - Set the size register.
* @drvdata: a pointer to the drvdata.
* @data: the size of the following read transaction, in words.
**/
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index e431d11abf8d..231f0149c540 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -168,7 +168,7 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv)
/*
* Look for the timer stop flag in the different states, so that we know
* if the broadcast timer has to be set up. The loop is in the reverse
- * order, because usually one of the deeper states have this flag set.
+ * order, because usually one of the deeper states has this flag set.
*/
for (i = drv->state_count - 1; i >= 0 ; i--) {
if (drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP) {
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 5da5b98b8f29..60f2267c1350 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -53,7 +53,7 @@
#define CMD0_IRQ_THRESHOLD 1
/*
- * The timeout period (in jiffies) for a PDU. When the the number of PDUs in
+ * The timeout period (in jiffies) for a PDU. When the number of PDUs in
* flight is greater than the STAT_IRQ_THRESHOLD or 0 the timer is disabled.
* When there are packets in flight but lower than the threshold, we enable
* the timer and at expiry, attempt to remove any processed packets from the
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 1c73f4fbc252..2f2a4276a014 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -435,7 +435,7 @@ static int hash_get_device_data(struct hash_ctx *ctx,
* @keylen: The lengt of the key.
*
* Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the the hw design spec. Either due to incorrect info in the
+ * specified in the hw design spec. Either due to incorrect info in the
* spec or due to a bug in the hw.
*/
static void hash_hw_write_key(struct hash_device_data *device_data,
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 3784e81e7762..d548a717d5b9 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -471,7 +471,7 @@ static int ichx_gpio_probe(struct platform_device *pdev)
/*
* If necessary, determine the I/O address of ACPI/power management
- * registers which are needed to read the the GPE0 register for GPI pins
+ * registers which are needed to read the GPE0 register for GPI pins
* 0 - 15 on some chipsets.
*/
if (!ichx_priv.desc->uses_gpe0)
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 41e91d70301e..9b43e701db28 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -111,7 +111,7 @@ static int sch_gpio_core_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
@@ -201,7 +201,7 @@ static int sch_gpio_resume_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 04a209e2b66d..ff92d4c5e379 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -529,12 +529,12 @@ EXPORT_SYMBOL(drm_mm_replace_node);
*
* The DRM range allocator supports this use-case through the scanning
* interfaces. First a scan operation needs to be initialized with
- * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The the driver adds
+ * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The driver adds
* objects to the roaster (probably by walking an LRU list, but this can be
* freely implemented) until a suitable hole is found or there's no further
* evitable object.
*
- * The the driver must walk through all objects again in exactly the reverse
+ * The driver must walk through all objects again in exactly the reverse
* order to restore the allocator state. Note that while the allocator is used
* in the scan mode no other operation is allowed.
*
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ad55b06a3cb1..a73c82dff95f 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2366,7 +2366,7 @@ int __i915_add_request(struct intel_engine_cs *ring,
/* Whilst this request exists, batch_obj will be on the
* active_list, and so will hold the active reference. Only when this
- * request is retired will the the batch_obj be moved onto the
+ * request is retired will the batch_obj be moved onto the
* inactive_list and lose its active reference. Hence we do not need
* to explicitly hold another reference here.
*/
diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c
index d38413997379..7a6a4fed2833 100644
--- a/drivers/gpu/drm/i915/i915_gem_userptr.c
+++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
@@ -225,7 +225,7 @@ i915_mmu_notifier_add(struct drm_device *dev,
* either has cancelled gup work queued and we need to
* return back to the user to give time for the gup-workers
* to flush their object references upon which the object will
- * be removed from the interval-tree, or the the range is
+ * be removed from the interval-tree, or the range is
* still in use by another client and the overlap is invalid.
*
* If we do have an overlap, we cannot use the interval tree
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d8324c69fa86..7b3d64f2ad3f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2607,7 +2607,7 @@ void intel_display_handle_reset(struct drm_device *dev)
* will get its events and not get stuck.
*
* Also update the base address of all primary
- * planes to the the last fb to make sure we're
+ * planes to the last fb to make sure we're
* showing the correct fb after a reset.
*
* Need to make two loops over the crtcs so that we
@@ -10854,7 +10854,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
}
/* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
+ * update the output configuration. */
intel_modeset_update_state(dev, prepare_pipes);
if (dev_priv->display.modeset_global_resources)
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 92be50c39ffd..2be3040b28f1 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -2802,8 +2802,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t
ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 00c0d2ba22d3..36af5f14f622 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -353,7 +353,7 @@
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 12c8329644c4..212cc45defc7 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -379,7 +379,7 @@ void radeon_doorbell_free(struct radeon_device *rdev, u32 doorbell)
/*
* radeon_wb_*()
- * Writeback is the the method by which the the GPU updates special pages
+ * Writeback is the method by which the GPU updates special pages
* in memory with the status of certain GPU events (fences, ring pointers,
* etc.).
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 913787085dfa..d616aea4a52c 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -45,7 +45,7 @@
* for GPU/CPU synchronization. When the fence is written,
* it is expected that all buffers associated with that fence
* are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed. Whether
+ * that the relevant GPU caches have been flushed. Whether
* we use a scratch register or memory location depends on the asic
* and whether writeback is enabled.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c
index 088ffdc2f577..6dbaac58c81e 100644
--- a/drivers/gpu/drm/radeon/radeon_vm.c
+++ b/drivers/gpu/drm/radeon/radeon_vm.c
@@ -40,8 +40,8 @@
* can be mapped as snooped (cached system pages) or unsnooped
* (uncached system pages).
* Each VM has an ID associated with it and there is a page table
- * associated with each VMID. When execting a command buffer,
- * the kernel tells the the ring what VMID to use for that command
+ * associated with each VMID. When executing a command buffer,
+ * the kernel tells the ring what VMID to use for that command
* buffer. VMIDs are allocated dynamically as commands are submitted.
* The userspace drivers maintain their own address space and the kernel
* sets up their pages tables accordingly when they submit their
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 531a593912ec..90947e08e44d 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -553,7 +553,7 @@ EXPORT_SYMBOL_GPL(vmbus_close);
* vmbus_sendpacket() - Send the specified buffer on the given channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @requestid: Identifier of the request
* @type: Type of packet that is being send e.g. negotiate, time
* packet etc.
@@ -730,7 +730,7 @@ EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
* vmbus_recvpacket() - Retrieve the user packet on the specified channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @buffer_actual_len: The actual size of the data after it was received
* @requestid: Identifier of the request
*
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 4d6b26979fbd..5a358e591403 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -849,8 +849,8 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the information we
- * need from DSDT.
+ * VMBUS is an acpi enumerated device. Get the IRQ information
+ * from DSDT.
*/
static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index 033d6aca47d3..d41d7e3bf31c 100644
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -117,7 +117,7 @@ static int ucd9200_probe(struct i2c_client *client,
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
- * for the the phases of the rail.
+ * for the phases of the rail.
*/
for (i = 0; i < info->pages; i++) {
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 28cfe97cf1e9..231b54591e2b 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -87,7 +87,7 @@
* These 3 values (SDR and DDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
+ * are also the possible values for ipath_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define IPATH_IB_SDR 1
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index c00ae093b6f8..6b6499a690af 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -333,7 +333,7 @@ struct qib_verbs_txreq {
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for qib_link_speed_enabled and active
+ * are also the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 8c7d94200bdb..c1418e619f0c 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -17,7 +17,7 @@
/*
* Timer function which is run every scan_ms ms when the device is opened.
- * The dev input variable is set to the the input_dev pointer.
+ * The dev input variable is set to the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_polled_dev *dev)
{
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 114f3bcba1b0..24c15bfb2199 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1566,7 +1566,7 @@ reset_hfcsusb(struct hfcsusb *hw)
write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
((hw->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 6590558d1d31..010d3c6cd5f4 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -202,7 +202,7 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
/*:*/
/*H:030
- * Let's jump straight to the the main loop which runs the Guest.
+ * Let's jump straight to the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
* going around and around until something interesting happens.
*/
diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h
index e404b6e44802..ce0fb855c705 100644
--- a/drivers/media/dvb-frontends/tda1002x.h
+++ b/drivers/media/dvb-frontends/tda1002x.h
@@ -1,6 +1,6 @@
/*
TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index 71fb63299de7..17534ff576ca 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1134,7 +1134,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
state->pll_pfactor = 0;
}
- /* Establish any defaults the the user didn't pass */
+ /* Establish any defaults the user didn't pass */
tda10048_establish_defaults(&state->frontend);
/* Set the xtal and freq defaults */
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..1f8820f5f8c0 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -37,7 +37,7 @@
(compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
/* We calculate the baseband frequencies of the carrier and the pilot tones
- * based on the the sampling rate of the audio rds fifo. */
+ * based on the sampling rate of the audio rds fifo. */
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index 2ad65eb29832..00e0818abfc9 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -555,7 +555,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f)
reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94);
/* Okay, we've wasted time working out the correct value,
- but if we use it, it fouls the the window alignment.
+ but if we use it, it fouls the window alignment.
Fudge it to what we want... */
reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16));
reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16));
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 1bf06970ca3e..ab627dfd7b28 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -636,7 +636,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
}
/* Check that the hardware is accessible. If the status bytes are
- * 0xFF then the device is not accessible, the the IRQ belongs
+ * 0xFF then the device is not accessible, the IRQ belongs
* to another driver.
* 4 x u32 interrupt registers.
*/
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 33b9660b7f77..6ea16e20449d 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -316,7 +316,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
* vpbe_get_output - Get output
* @vpbe_dev - vpbe device ptr
*
- * return current vpbe output to the the index
+ * return current vpbe output to the index
*/
static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
{
diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 3d2babd5067a..b8181874a149 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -505,7 +505,7 @@ static int fimc_capture_open(struct file *file)
if (ret == 0 && vc->user_subdev_api && vc->inh_sensor_ctrls) {
/*
- * Recreate controls of the the video node to drop
+ * Recreate controls of the video node to drop
* any controls inherited from the sensor subdev.
*/
fimc_ctrls_delete(vc->ctx);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 2c7aa6720569..5b8a0e779d0f 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1710,7 +1710,7 @@ void omap3isp_print_status(struct isp_device *isp)
* To solve this problem power management support is split into prepare/complete
* and suspend/resume operations. The pipelines are stopped in prepare() and the
* ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
- * resume(), and the the pipelines are restarted in complete().
+ * resume(), and the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not modelled explicitly
* yet.
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index d56f927fc31a..b5d2e805380d 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 474a17e4db0c..4c7f8fed8046 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h
index 0f461ca10cb9..82d19dcdebc0 100644
--- a/drivers/media/usb/dvb-usb/friio.h
+++ b/drivers/media/usb/dvb-usb/friio.h
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
index 52bdb569760b..414c1b752911 100644
--- a/drivers/media/usb/gspca/finepix.c
+++ b/drivers/media/usb/gspca/finepix.c
@@ -143,7 +143,7 @@ again:
* for, then it's the end of the
* frame. Sometimes the jpeg is not complete,
* but there's nothing we can do. We also end
- * here if the the jpeg ends right at the end
+ * here if the jpeg ends right at the end
* of the frame. */
gspca_frame_add(gspca_dev, LAST_PACKET,
data, len);
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 2e8c3afe4ec4..b7b5a1f630af 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1313,7 +1313,7 @@ static int tm6000_usb_probe(struct usb_interface *interface,
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
-/* check if the the device has the iso in endpoint at the correct place */
+/* check if the device has the iso in endpoint at the correct place */
if (!dev->isoc_in.endp) {
printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
rc = -ENODEV;
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 9144a2f3ed82..62adffa2bd50 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1000,7 +1000,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
}
/* Synchronize to the input stream by waiting for the FID bit to be
- * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE.
* stream->last_fid is initialized to -1, so the first isochronous
* frame will always be in sync.
*
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index d15e16737eef..32d8d6a07e99 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -981,7 +981,7 @@ static void v4l_sanitize_format(struct v4l2_format *fmt)
/*
* The v4l2_pix_format structure has been extended with fields that were
* not previously required to be set to zero by applications. The priv
- * field, when set to a magic value, indicates the the extended fields
+ * field, when set to a magic value, indicates that the extended fields
* are valid. Otherwise they will contain undefined values. To simplify
* the API towards drivers zero the extended fields and set the priv
* field to the magic value when the extended pixel format structure
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 04644e7b42b1..303b322756c7 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -373,7 +373,7 @@ static const struct lpddr2_addressing *get_addressing_table(
}
/*
- * Find the the right timing table from the array of timing
+ * Find the right timing table from the array of timing
* tables of the device using DDR clock frequency
*/
static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 787933d43d32..4328cf6ecf13 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
* @target: per target private data
* @sdev: SCSI device
*
- * Update the target negotiation parameters based on the the Inquiry
+ * Update the target negotiation parameters based on the Inquiry
* data, adapter capabilities, and NVRAM settings.
**/
static void
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 193cf168ba84..5d03af1f5103 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -898,7 +898,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
- * This function sets the the operating point of the ARM.
+ * This function sets the operating point of the ARM.
*/
int db8500_prcmu_set_arm_opp(u8 opp)
{
diff --git a/drivers/misc/mic/bus/mic_bus.c b/drivers/misc/mic/bus/mic_bus.c
index 961ae90aae47..1b15af8c5101 100644
--- a/drivers/misc/mic/bus/mic_bus.c
+++ b/drivers/misc/mic/bus/mic_bus.c
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ drivers/virtio/virtio.c
*/
#include <linux/slab.h>
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 913de07e577c..6482a9c4eb44 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -48,7 +48,7 @@
* kernel/user requirements.
*
* Blade percpu resources reserved for kernel use. These resources are
- * reserved whenever the the kernel context for the blade is loaded. Note
+ * reserved whenever the kernel context for the blade is loaded. Note
* that the kernel context is not guaranteed to be always available. It is
* loaded on demand & can be stolen by a user if the user demand exceeds the
* kernel demand. The kernel can always reload the kernel context but
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 95c894482fdd..f87520cfb787 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1594,7 +1594,7 @@ out_2:
* by xpc_notify_senders_of_disconnect_uv(), and to also get an
* error returned here will confuse them. Additionally, since
* in this case the channel is being disconnected we don't need
- * to put the the msg_slot back on the free list.
+ * to put the msg_slot back on the free list.
*/
if (cmpxchg(&msg_slot->func, func, NULL) != func) {
ret = xpSuccess;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 959cb9b70310..c5b1237ecb33 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -942,7 +942,7 @@ static uint8_t gpmi_read_byte(struct mtd_info *mtd)
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
- * because the the operations are the same.
+ * because the operations are the same.
*/
static void block_mark_swapping(struct gpmi_nand_data *this,
void *payload, void *auxiliary)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 7bf416329c19..3430b17875b5 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -252,7 +252,7 @@ struct ubi_fm_pool {
/**
* struct ubi_volume - UBI volume description data structure.
- * @dev: device object to make use of the the Linux device model
+ * @dev: device object to make use of the Linux device model
* @cdev: character device object to create character device
* @ubi: reference to the UBI device description object
* @vol_id: volume ID
@@ -380,7 +380,7 @@ struct ubi_debug_info {
/**
* struct ubi_device - UBI device description structure
- * @dev: UBI device object to use the the Linux device model
+ * @dev: UBI device object to use for the Linux device model
* @cdev: character device object to create character device
* @ubi_num: UBI device number
* @ubi_name: UBI device name
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 20f491713145..72b64109a22f 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -727,7 +727,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
/**
* sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
- * @e: the the physical eraseblock to erase
+ * @e: the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
*
* This function returns zero in case of success and a negative error code in
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 5e8b5609c067..ad5bfe8618a6 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -532,7 +532,7 @@ static int xcan_rx(struct net_device *ndev)
* @isr: interrupt status register value
*
* This is the CAN error interrupt and it will
- * check the the type of error and forward the error
+ * check the type of error and forward the error
* frame to upper layers.
*/
static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index 25d6b2a10e4e..a6fa3c211f69 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1234,7 +1234,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
* @budget : maximum number of packets that the current CPU can receive from
* all interfaces.
* Description :
- * This function implements the the reception process.
+ * This function implements the reception process.
* Also it runs the TX completion thread
*/
static int xgmac_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 93ff8ef39352..50a7353a85c8 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2363,7 +2363,7 @@ static irqreturn_t be_intx(int irq, void *dev)
}
be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- /* Return IRQ_HANDLED only for the the first spurious intr
+ /* Return IRQ_HANDLED only for the first spurious intr
* after a valid intr to stop the kernel from branding
* this irq as a bad one!
*/
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 1acf5034db10..ee82072b4c08 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -3986,7 +3986,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
* @hw: Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*/
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 48b74a549155..392eb5748897 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3892,7 +3892,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
* @hw: pointer to the HW structure
*
* ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
- * register, so the the bus width is hard coded.
+ * register, so the bus width is hard coded.
**/
static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 236a6183a865..0172e6b70eee 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2166,7 +2166,7 @@ out:
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 87bd53fdd209..81e6836f38ee 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -229,7 +229,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
struct pci_dev *pdev;
- /* determine whether to use the the parent device
+ /* determine whether to use the parent device
*/
if (ixgbe_pcie_from_parent(&adapter->hw))
pdev = adapter->pdev->bus->parent->self;
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index f5e4b820128b..aad8fdb4dfc6 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2158,7 +2158,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
/*
* In PCI 33 mode, the P_PLL is not used, and therefore,
- * the the P_PLL_LOCK bit in the adapter_status register will
+ * the P_PLL_LOCK bit in the adapter_status register will
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 3b67d60d4378..b8da6e89059a 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -83,7 +83,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* returns: 0 on success, -ETIMEDOUT on a timeout
*
* Writes the value to the requested register by first writing the value
- * into MWD register. The the MCR register is then appropriately setup
+ * into MWD register. The MCR register is then appropriately setup
* to finish the write operation.
*/
static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 5a34e72bab9a..6113a29f01bc 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -250,14 +250,14 @@ struct i2400m_barker_db;
*
* @bus_setup: [optional fill] Function called by the bus-generic code
* [i2400m_setup()] to setup the basic bus-specific communications
- * to the the device needed to load firmware. See LIFE CYCLE above.
+ * to the device needed to load firmware. See LIFE CYCLE above.
*
* NOTE: Doesn't need to upload the firmware, as that is taken
* care of by the bus-generic code.
*
* @bus_release: [optional fill] Function called by the bus-generic
* code [i2400m_release()] to shutdown the basic bus-specific
- * communications to the the device needed to load firmware. See
+ * communications to the device needed to load firmware. See
* LIFE CYCLE above.
*
* This function does not need to reset the device, just tear down
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 0b602951ff6b..4466ee71d1e4 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -693,7 +693,7 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq,
* right spot where to insert the packet; we know the queue is
* not empty, so we are not the first ones; we also know we
* are not going to be the last ones. The list is sorted, so
- * we have to insert before the the first guy with an nsn_itr
+ * we have to insert before the first guy with an nsn_itr
* greater that our nsn. */
skb_queue_walk(&roq->queue, skb_itr) {
roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb;
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index f20886ade1cc..1f7b2b922fae 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -233,7 +233,7 @@
* i2400m_tx_skip_tail() Marks unusable FIFO tail space
* i2400m->bus_tx_kick()
*
- * Now i2400m->bus_tx_kick() is the the bus-specific driver backend
+ * Now i2400m->bus_tx_kick() is the bus-specific driver backend
* implementation; that would do:
*
* i2400m->bus_tx_kick()
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index 1c584c4b019c..f34f24d362ed 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -77,7 +77,7 @@ struct rx_attention {
* first_msdu is set.
*
* peer_idx_invalid
- * Indicates no matching entries within the the max search
+ * Indicates no matching entries within the max search
* count. Only set when first_msdu is set.
*
* peer_idx_timeout
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index dc6bd8cd9b83..e32154fe1732 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -98,7 +98,7 @@ struct bus_request {
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- * implemented using the asynchronous mode allowing the the bus
+ * implemented using the asynchronous mode allowing the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 339d89f14d32..8c866de2fe43 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1173,7 +1173,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
* Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
+ * response is available in the FIFO
*
* CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index 9a2afa2c690b..5184d6cbcb90 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -638,7 +638,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN,
AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT);
- /* on AR92xx, the highest bit of count will make the the chip send
+ /* on AR92xx, the highest bit of count will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 542a8d51d3b0..5c8f1e6da5dc 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1627,7 +1627,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
- /* on AR93xx and newer, count = 0 will make the the chip send
+ /* on AR93xx and newer, count = 0 will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index a1f1127d7808..24cce9db3ce0 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -1609,7 +1609,7 @@ struct wcn36xx_hal_config_bss_params {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -1746,7 +1746,7 @@ struct wcn36xx_hal_config_bss_params_v1 {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -3736,10 +3736,10 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
/* success or failure */
u32 status;
- /* Length of the responce message */
+ /* Length of the response message */
u32 rsp_length;
- /* FIXME: Currently considering the the responce will be less than
+ /* FIXME: Currently considering that the response will be less than
* 100bytes */
u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
} __packed;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 1b474828d5b8..46a0d6575454 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3819,7 +3819,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
}
/*
- * Suspend the the MAC and update the slot timing
+ * Suspend the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index d6073f67b212..c2f550cfbf41 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -189,7 +189,7 @@ enum iwl_tx_flags {
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
+ * @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @key: security key
* @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
@@ -552,7 +552,7 @@ struct iwl_extended_beacon_notif {
/**
* enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
+ * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
index 6cc243f7cf60..8357397cf7d0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
@@ -65,7 +65,7 @@
#include "fw-api.h"
#include "mvm.h"
-/* Maps the driver specific channel width definition to the the fw values */
+/* Maps the driver specific channel width definition to the fw values */
static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
{
switch (chandef->width) {
@@ -86,7 +86,7 @@ static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
/*
* Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
+ * freq) definitions to the fw values
*/
static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index 2713f7acd35e..53618b0e29c0 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -262,7 +262,7 @@ free_and_exit:
* This function is called when the 'fw_dump' file is opened for
* reading.
* This function dumps firmware memory in different files
- * (ex. DTCM, ITCM, SQRAM etc.) based on the the segments for
+ * (ex. DTCM, ITCM, SQRAM etc.) based on the segments for
* debugging.
*/
static ssize_t
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 8428858204a6..e1f05ad89d9e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -596,7 +596,7 @@ static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
* rsi_sdio_host_intf_read_pkt() - This function reads the packet
from the device.
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
* @length: Length of the data to be read from the device.
*
* Return: 0 on success, -1 on failure.
@@ -627,7 +627,7 @@ int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter,
* rsi_init_sdio_interface() - This function does init specific to SDIO.
*
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
*
* Return: 0 on success, -1 on failure.
*/
diff --git a/drivers/net/wireless/ti/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h
index 2bdec38699f4..bfe998947957 100644
--- a/drivers/net/wireless/ti/wl1251/acx.h
+++ b/drivers/net/wireless/ti/wl1251/acx.h
@@ -1243,7 +1243,7 @@ struct wl1251_acx_arp_filter {
u8 address[16]; /* The IP address used to filter ARP packets.
ARP packets that do not match this address are
dropped. When the IP Version is 4, the last 12
- bytes of the the address are ignored. */
+ bytes of the address are ignored. */
} __attribute__((packed));
struct wl1251_acx_ac_cfg {
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 293ed4b687ba..be53777b9f3d 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1849,7 +1849,7 @@ static void of_alias_add(struct alias_prop *ap, struct device_node *np,
* of_alias_scan - Scan all properties of 'aliases' node
*
* The function scans all the properties of 'aliases' node and populate
- * the the global lookup table with the properties. It returns the
+ * the global lookup table with the properties. It returns the
* number of alias_prop found, or error code in error case.
*
* @dt_alloc: An allocator that provides a virtual address to memory
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 6cd5160fc057..89f16d320ead 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -36,7 +36,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#define pr_fmt(fmt) "acpiphp_glue: " fmt
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
index 7dfef3ee5b53..40511e39cea5 100644
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ b/drivers/pcmcia/pxa2xx_hx4700.c
@@ -33,7 +33,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/*
* IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
* The asic3 default IRQ type is level trigger low level detect, exactly
- * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+ * the signal present on GPIOD4_CF_nCD when a CF card is inserted.
* If the IRQ type is not changed, the asic3 interrupt handler will loop
* repeatedly because it is unable to clear the level trigger interrupt.
*/
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index e7cab07eef47..37060a07f260 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1250,7 +1250,7 @@ static int nmk_gpio_probe(struct platform_device *dev)
platform_set_drvdata(dev, nmk_chip);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 60464a2648aa..67a538ebea90 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1461,7 +1461,7 @@ static int at91_gpio_of_irq_setup(struct device_node *node,
writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 750a20275664..b01c7698df02 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -298,8 +298,9 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
ret = power_supply_show_property(dev, attr, prop_buf);
if (ret == -ENODEV || ret == -ENODATA) {
- /* When a battery is absent, we expect -ENODEV. Don't abort;
- send the uevent with at least the the PRESENT=0 property */
+ /* When a battery is absent, we expect -ENODEV.
+ * Don't abort; send the uevent with at least
+ * the PRESENT=0 property */
ret = 0;
continue;
}
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index ccf54f06396b..2108302cc965 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -122,7 +122,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
- * configurations, so we use the the first method there, stripping off
+ * configurations, so we use the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index fd22c811cbe1..8a84e2e42ca2 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3454,7 +3454,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 2035b0d64351..e62a7346428a 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1983,7 +1983,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
/*
* Device's PID has changed. We need to cleanup
* and re-login. If there is another device with
- * the the newly discovered pid, send an scn notice
+ * the newly discovered pid, send an scn notice
* so that its new pid can be discovered.
*/
list_for_each(qe, &rport->port->rport_q) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 00ee0ed642aa..0b88610b9795 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -510,7 +510,7 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
* @skb: The receive skb
* @netdev: The associated net device
* @ptype: The packet_type structure which was used to register this handler
- * @orig_dev: The original net_device the the skb was received on.
+ * @orig_dev: The original net_device that the skb was received on.
* (in case dev is a bond)
*
* Returns: 0 for success
@@ -2727,7 +2727,7 @@ module_exit(fcoe_exit);
* fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
* @seq: active sequence in the FLOGI or FDISC exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
@@ -2756,7 +2756,7 @@ done:
* fcoe_logo_resp() - FCoE specific LOGO response handler
* @seq: active sequence in the LOGO exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 34a1b1f333b4..65a53a9eb059 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -213,7 +213,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new)
* that doesn't have a priv (fcf was deleted). However,
* libfcoe will always delete FCFs before trying to add
* them. This is ensured because both recv_adv and
- * age_fcfs are protected by the the fcoe_ctlr's mutex.
+ * age_fcfs are protected by the fcoe_ctlr's mutex.
* This means that we should never get a FCF with a
* non-NULL priv pointer.
*/
@@ -694,7 +694,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
*
* The caller must check that the length is a multiple of 4.
* The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
- * The the skb must also be an fc_frame.
+ * The skb must also be an fc_frame.
*
* This is called from the lower-level driver with spinlocks held,
* so we must not take a mutex here.
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 22a9bb1abae1..025ec5c10978 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -244,7 +244,7 @@ enum sci_controller_states {
SCIC_INITIALIZED,
/**
- * This state indicates the the controller is in the process of becoming
+ * This state indicates that the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 47a013fffae7..07af745220eb 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete(
* permitted. This state is entered from the INITIAL state. This state
* is entered from the STOPPING state.
*
- * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * @SCI_DEV_STARTING: This state indicates that the remote device is in
* the process of becoming ready (i.e. starting). In this state no new
* IO operations are permitted. This state is entered from the STOPPED
* state.
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
index c7ee81d01125..f22950b12b8b 100644
--- a/drivers/scsi/isci/remote_node_context.h
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state {
/**
* struct sci_remote_node_context - This structure contains the data
* associated with the remote node context object. The remote node context
- * (RNC) object models the the remote device information necessary to manage
+ * (RNC) object models the remote device information necessary to manage
* the silicon RNC.
*/
struct sci_remote_node_context {
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 5d6fda72d659..ba330e56bfe7 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -67,7 +67,7 @@
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
-* @ihost: host on which the the request was queued
+* @ihost: host on which the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 6eed9e76a166..20bdd0603108 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1680,7 +1680,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -1713,7 +1713,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -1846,7 +1846,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -1878,7 +1878,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 7a5d81a65be8..5a447c2c6522 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5813,7 +5813,7 @@ reject_out:
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful, the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 2a17e31265b8..fbad2c534691 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2012,7 +2012,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so that the round robin selection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
@@ -5727,7 +5727,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
}
/* This routine decrements the reference count for a ndlp structure. If the
- * count goes to 0, this indicates the the associated nodelist should be
+ * count goes to 0, this indicates that the associated nodelist should be
* freed. Returning 1 indicates the ndlp resource has been released; on the
* other hand, returning 0 indicates the ndlp resource has not been released
* yet.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index a5769a9960ac..ae2d01f7e67d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3903,7 +3903,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelevant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 1f292e29d566..d9a9ddbf1771 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2265,7 +2265,7 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * that the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 32ada0505576..a24a0b1e59d4 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -16748,7 +16748,7 @@ out:
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index dd12c6fe57a6..7508ee4810a8 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3212,7 +3212,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when HBA driver received the identify done event or initiate FIS received
* event(for SATA), it will invoke this function to notify the sas layer that
- * the sas toplogy has formed, please discover the the whole sas domain,
+ * the sas toplogy has formed, please discover the whole sas domain,
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 80b8408ac3e3..4cbdc43d509c 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -354,7 +354,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
{
/*
* On all 4xx PPC's the SPI bus is shared/multiplexed with
- * the 2nd I2C bus. We need to enable the the SPI bus before
+ * the 2nd I2C bus. We need to enable the SPI bus before
* using it.
*/
diff --git a/drivers/staging/android/ion/ion.c b/drivers/staging/android/ion/ion.c
index 270360912b2c..200ea0ccf7c4 100644
--- a/drivers/staging/android/ion/ion.c
+++ b/drivers/staging/android/ion/ion.c
@@ -901,7 +901,7 @@ void ion_pages_sync_for_device(struct device *dev, struct page *page,
sg_set_page(&sg, page, size, 0);
/*
* This is not correct - sg_dma_address needs a dma_addr_t that is valid
- * for the the targeted device, but this works on the currently targeted
+ * for the targeted device, but this works on the currently targeted
* hardware.
*/
sg_dma_address(&sg) = page_to_phys(page);
diff --git a/drivers/staging/android/uapi/binder.h b/drivers/staging/android/uapi/binder.h
index 904adb7600cf..1dd36442263e 100644
--- a/drivers/staging/android/uapi/binder.h
+++ b/drivers/staging/android/uapi/binder.h
@@ -265,7 +265,7 @@ enum binder_driver_return_protocol {
BR_FAILED_REPLY = _IO('r', 17),
/*
- * The the last transaction (either a bcTRANSACTION or
+ * The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
};
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 831b7c6fe494..3f1f28e2dce2 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -1234,7 +1234,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
/* Initialize the Space Available Register */
writel(0, &rxmac->space_avail);
- /* Initialize the the mif_ctrl register
+ /* Initialize the mif_ctrl register
* bit 3: Receive code error. One or more nibbles were signaled as
* errors during the reception of the packet. Clear this
* bit in Gigabit, set it in 100Mbit. This was derived
diff --git a/drivers/staging/lustre/lustre/llite/file.c b/drivers/staging/lustre/lustre/llite/file.c
index fd1b75a3a569..6c40b3665521 100644
--- a/drivers/staging/lustre/lustre/llite/file.c
+++ b/drivers/staging/lustre/lustre/llite/file.c
@@ -364,7 +364,7 @@ int ll_file_release(struct inode *inode, struct file *file)
fd = LUSTRE_FPRIVATE(file);
LASSERT(fd != NULL);
- /* The last ref on @file, maybe not the the owner pid of statahead.
+ /* The last ref on @file, maybe not the owner pid of statahead.
* Different processes can open the same dir, "ll_opendir_key" means:
* it is me that should stop the statahead thread. */
if (S_ISDIR(inode->i_mode) && lli->lli_opendir_key == fd &&
diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
index 5e4e49fab63c..815c5866cb4b 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
@@ -447,7 +447,7 @@ struct timeout_item* ptlrpc_new_timeout(int time, enum timeout_event event,
}
/**
- * Register timeout event on the the pinger thread.
+ * Register timeout event on the pinger thread.
* Note: the timeout list is an sorted list with increased timeout value.
*/
static struct timeout_item*
diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index 104b01fa0fad..803ddfb8d065 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -453,7 +453,7 @@ u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network *pnetwork)
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the connection. */
+ /* If the driver wants to use the bssid to create the connection. */
/* If not, we have to copy the connecting AP's MAC address to it so that */
/* the driver just has the bssid information for PMKIDList searching. */
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 73410ccfb1ec..ebefffd2e96a 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -920,7 +920,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
int i;
struct ieee80211_rxb *rxb = NULL;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.c b/drivers/staging/rtl8712/rtl871x_cmd.c
index d9c1561e3272..5aae4cce8477 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -527,7 +527,7 @@ u8 r8712_joinbss_cmd(struct _adapter *padapter, struct wlan_network *pnetwork)
memcpy(&psecuritypriv->authenticator_ie[1],
&psecnetwork->IEs[12], (256-1));
psecnetwork->IELength = 0;
- /* If the the driver wants to use the bssid to create the connection.
+ /* If the driver wants to use the bssid to create the connection.
* If not, we copy the connecting AP's MAC address to it so that
* the driver just has the bssid information for PMKIDList searching.
*/
diff --git a/drivers/staging/rtl8723au/core/rtw_cmd.c b/drivers/staging/rtl8723au/core/rtw_cmd.c
index 7241a5a8731c..611cd1f6c555 100644
--- a/drivers/staging/rtl8723au/core/rtw_cmd.c
+++ b/drivers/staging/rtl8723au/core/rtw_cmd.c
@@ -518,7 +518,7 @@ int rtw_joinbss_cmd23a(struct rtw_adapter *padapter,
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the
+ /* If the driver wants to use the bssid to create the
* connection. If not, we have to copy the connecting AP's
* MAC address to it so that the driver just has the bssid
* information for PMKIDList searching. */
diff --git a/drivers/staging/unisys/common-spar/include/channels/iochannel.h b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
index 24e11858e0ee..0fce4fd54ce9 100644
--- a/drivers/staging/unisys/common-spar/include/channels/iochannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
@@ -595,7 +595,7 @@ struct uiscmdrsp_scsitaskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
@@ -642,7 +642,7 @@ struct uiscmdrsp_vdiskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
diff --git a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
index 8facb51143ae..9dc629f36cc1 100644
--- a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
@@ -68,11 +68,11 @@ typedef struct _ULTRA_VBUS_HEADERINFO {
u32 devInfoCount; /* num of items in DevInfo member */
/* (this is the allocated size) */
u32 chpInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the ChpInfo struct (below) */
+ /* to the ChpInfo struct (below) */
u32 busInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the BusInfo struct (below) */
+ /* to the BusInfo struct (below) */
u32 devInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the DevInfo array (below) */
+ /* to the DevInfo array (below) */
u8 reserved[104];
} ULTRA_VBUS_HEADERINFO;
diff --git a/drivers/staging/unisys/virtpci/virtpci.c b/drivers/staging/unisys/virtpci/virtpci.c
index d9443a968ddf..97f3d823c688 100644
--- a/drivers/staging/unisys/virtpci/virtpci.c
+++ b/drivers/staging/unisys/virtpci/virtpci.c
@@ -745,7 +745,7 @@ static int virtpci_device_resume(struct device *dev)
/* For a child device just created on a client bus, fill in
* information about the driver that is controlling this device into
- * the the appropriate slot within the vbus channel of the bus
+ * the appropriate slot within the vbus channel of the bus
* instance.
*/
static void fix_vbus_devInfo(struct device *dev, int devNo, int devType,
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index fbc5ebb5f761..c0664ec01fc2 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -411,7 +411,7 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
} else {
/*
* Extract the RELATIVE TARGET PORT IDENTIFIER to identify
- * the Target Port in question for the the incoming
+ * the Target Port in question for the incoming
* SET_TARGET_PORT_GROUPS op.
*/
rtpi = get_unaligned_be16(ptr + 2);
diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h
index ba87d6e731dd..1a4ba247f160 100644
--- a/drivers/thunderbolt/ctl.h
+++ b/drivers/thunderbolt/ctl.h
@@ -44,7 +44,7 @@ struct tb_cfg_result {
* If err = 1 then this is the port that send the
* error.
* If err = 0 and if this was a cfg_read/write then
- * this is the the upstream port of the responding
+ * this is the upstream port of the responding
* switch.
* Otherwise the field is set to zero.
*/
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 6234c75da33f..50294f31f227 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -313,8 +313,7 @@ static const int hrsl_to_error[] = {
/*
* See http://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a
- * reasonable overview of how control transfers use the the IN/OUT
- * tokens.
+ * reasonable overview of how control transfers use the IN/OUT tokens.
*/
#define MAX3421_HXFR_BULK_IN(ep) (0x00 | (ep)) /* bulk or interrupt */
#define MAX3421_HXFR_SETUP 0x10
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index abed30b82905..54674c03d22b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1652,7 +1652,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
- * RExit to a disconnect state). If so, let the the driver know it's
+ * RExit to a disconnect state). If so, let the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED(temp) &&
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 01bf53392819..1b99a08ca2de 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -261,7 +261,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
* Cypress app note that describes this mechanism
- * states the the low-speed part can't handle more
+ * states that the low-speed part can't handle more
* than 800 bytes/sec, in which case 4800 baud is the
* safest speed for a part like that.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index dfd728a263d2..71636a617d89 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -429,7 +429,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
}
/*
- * This is the the common top part of all parallel port callback operations that
+ * This is the common top part of all parallel port callback operations that
* send synchronous messages to the device. This implements convoluted locking
* that avoids two scenarios: (1) a port operation is called after usbserial
* has called our release function, at which point struct mos7715_parport has
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 0677139c6065..d435940d5598 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -46,7 +46,7 @@
*
* ASSUMPTIONS:
*
- * - We use the the as device address the port number where it is
+ * - We use as device address the port number where it is
* connected (port 0 doesn't exist). For unauth, it is 128 + that.
*
* ROADMAP:
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
index b7d4f6b75eef..caa4cb40334d 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/uwb/drp-ie.c
@@ -262,7 +262,7 @@ int uwb_drp_ie_update(struct uwb_rsv *rsv)
* We are given a zone id and the MAS bitmap of bits that need to be set in
* this zone. Note that this zone may already have bits set and this only
* adds settings - we cannot simply assign the MAS bitmap contents to the
- * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * zone contents. We iterate over the bits (MAS) in the zone and set the
* bits that are set in the given MAS bitmap.
*/
static
diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
index d4e7684e7045..501bc08dc125 100644
--- a/drivers/video/fbdev/omap/sossi.c
+++ b/drivers/video/fbdev/omap/sossi.c
@@ -370,7 +370,7 @@ static void sossi_set_bits_per_cycle(int bpc)
int bus_pick_count, bus_pick_width;
/*
- * We set explicitly the the bus_pick_count as well, although
+ * We set explicitly the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
diff --git a/drivers/video/fbdev/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c
index ceb434c95c0d..9177b8056356 100644
--- a/drivers/video/fbdev/sis/sis_accel.c
+++ b/drivers/video/fbdev/sis/sis_accel.c
@@ -215,7 +215,7 @@ SiS310SubsequentScreenToScreenCopy(struct sis_video_info *ivideo, int src_x, int
* and destination blitting areas overlap and
* adapt the bitmap addresses synchronously
* if the coordinates exceed the valid range.
- * The the areas do not overlap, we do our
+ * If the areas do not overlap, we do our
* normal check.
*/
if((mymax - mymin) < height) {
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 5b570b6efa28..ecbd6b7b6c9a 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -507,7 +507,7 @@ static int autofs_dev_ioctl_askumount(struct file *fp,
* located path is the root of a mount we return 1 along with
* the super magic of the mount or 0 otherwise.
*
- * In both cases the the device number (as returned by
+ * In both cases the device number (as returned by
* new_encode_dev()) is also returned.
*/
static int autofs_dev_ioctl_ismountpoint(struct file *fp,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index eea26e1b2fda..8ae32564e6d7 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -849,7 +849,7 @@ int btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace)
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
- * not called and the the filesystem is remounted
+ * not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancelation is wanted.
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index 6528aa662181..6c5ce8e50f32 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -3402,7 +3402,7 @@ verbose_printk("btrfs: process_recorded_refs %llu\n", sctx->cur_ino);
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
- * the the current inum. To handle this case, we create the
+ * than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 1d1ba083ca6e..3d5b414003b3 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2654,7 +2654,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
mutex_unlock(&log_root_tree->log_mutex);
/*
- * nobody else is going to jump in and write the the ctree
+ * nobody else is going to jump in and write the ctree
* super here because the log_commit atomic below is protecting
* us. We must be called with a transaction handle pinning
* the running transaction open, so a full commit can't hop
diff --git a/fs/dcache.c b/fs/dcache.c
index cb25a1a5e307..4a327e47b6b0 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1885,8 +1885,8 @@ EXPORT_SYMBOL(d_obtain_root);
* same inode, only the actual correct case is stored in the dcache for
* case-insensitive filesystems.
*
- * For a case-insensitive lookup match and if the the case-exact dentry
- * already exists in in the dcache, use it and return it.
+ * For a case-insensitive lookup match and if the case-exact dentry
+ * already exists in the dcache, use it and return it.
*
* If no entry exists with the exact case name, allocate new dentry with
* the exact case, and return the spliced entry.
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 4725a07f003c..bcdfbc7568d7 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -900,7 +900,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack {
* @filename: This function kmalloc's the memory for the filename
* @filename_size: This function sets this to the amount of memory
* kmalloc'd for the filename
- * @packet_size: This function sets this to the the number of octets
+ * @packet_size: This function sets this to the number of octets
* in the packet parsed
* @mount_crypt_stat: The mount-wide cryptographic context
* @data: The memory location containing the start of the tag 70
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index d9a17d0b124d..c9c6f2e5a0a0 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -51,7 +51,7 @@ struct ext2_block_alloc_info {
/*
* Was i_next_alloc_goal in ext2_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it is the physical block number of the block which was most-recently
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index bea662bd0ca6..3b94971b7b9b 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -271,7 +271,7 @@ static int ext4_create_inline_data(handle_t *handle,
len = 0;
}
- /* Insert the the xttr entry. */
+ /* Insert the xttr entry. */
i.value = value;
i.value_len = len;
@@ -829,7 +829,7 @@ out:
/*
* Prepare the write for the inline data.
- * If the the data can be written into the inode, we just read
+ * If the data can be written into the inode, we just read
* the page and make it uptodate, and start the journal.
* Otherwise read the page, makes it dirty so that it can be
* handle in writepages(the i_disksize update is left to the
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index ff483257283b..5b3f3135fb0a 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -150,7 +150,7 @@ struct seg_entry {
unsigned short valid_blocks; /* # of valid blocks */
unsigned char *cur_valid_map; /* validity bitmap of blocks */
/*
- * # of valid blocks and the validity bitmap stored in the the last
+ * # of valid blocks and the validity bitmap stored in the last
* checkpoint pack. This information is used by the SSR mode.
*/
unsigned short ckpt_valid_blocks;
diff --git a/fs/kernfs/file.c b/fs/kernfs/file.c
index 4429d6d9217f..2d4e4ef09b73 100644
--- a/fs/kernfs/file.c
+++ b/fs/kernfs/file.c
@@ -259,7 +259,7 @@ static ssize_t kernfs_fop_read(struct file *file, char __user *user_buf,
* There is no easy way for us to know if userspace is only doing a partial
* write, so we don't support them. We expect the entire buffer to come on
* the first write. Hint: if you're writing a value, first read the file,
- * modify only the the value you're changing, then write entire buffer
+ * modify only the value you're changing, then write entire buffer
* back.
*/
static ssize_t kernfs_fop_write(struct file *file, const char __user *user_buf,
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 044013455621..c0aa12bdb106 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -690,7 +690,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb,
/*
* Under certain conditions, the window slide code
* might have reduced the number of bits available or
- * disabled the the local alloc entirely. Re-check
+ * disabled the local alloc entirely. Re-check
* here and return -ENOSPC if necessary.
*/
status = -ENOSPC;
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index 5a6bd5d8779a..85438d16e633 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -71,7 +71,7 @@ xfs_fs_encode_fh(
fileid_type = FILEID_INO32_GEN_PARENT;
/*
- * If the the filesystem may contain 64bit inode numbers, we need
+ * If the filesystem may contain 64bit inode numbers, we need
* to use larger file handles that can represent them.
*
* While we only allocate inodes that do not fit into 32 bits any
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index 26bb55e9e8b6..37cdb83e1e24 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -120,7 +120,7 @@ static inline int drm_rect_height(const struct drm_rect *r)
}
/**
- * drm_rect_visible - determine if the the rectangle is visible
+ * drm_rect_visible - determine if the rectangle is visible
* @r: rectangle whose visibility is returned
*
* RETURNS:
diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h
index d5b5f76d57ef..91c32b80c6d1 100644
--- a/include/linux/mic_bus.h
+++ b/include/linux/mic_bus.h
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ include/linux/virtio.h.
*/
#ifndef _MIC_BUS_H_
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 8981cc882ed2..0b3da6784a66 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -196,7 +196,7 @@ extern pgprot_t protection_map[16];
#define FAULT_FLAG_USER 0x80 /* The fault originated in userspace */
/*
- * vm_fault is filled by the the pagefault handler and passed to the vma's
+ * vm_fault is filled by the pagefault handler and passed to the vma's
* ->fault function. The vma's ->fault is responsible for returning a bitmask
* of VM_FAULT_xxx flags that give details about how the fault was handled.
*
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 494f99e852da..f9f20ca81f51 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -94,7 +94,7 @@ struct kparam_array
* ".") the kernel commandline parameter. Note that - is changed to _, so
* the user can use "foo-bar=1" even for variable "foo_bar".
*
- * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * @perm is 0 if the variable is not to appear in sysfs, or 0444
* for world-readable, 0644 for root-writable, etc. Note that if it
* is writable, you may need to use kparam_block_sysfs_write() around
* accesses (esp. charp, which can be kfreed when it changes).
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index abde271c18ae..51301dc8c0c5 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2697,7 +2697,7 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
* must call this function to return the skb back to the stack, with
* or without a timestamp.
*
- * @skb: clone of the the original outgoing packet
+ * @skb: clone of the original outgoing packet
* @hwtstamps: hardware time stamps, may be NULL if not available
*
*/
diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h
index 94e5ed64dc6d..e9a8d524ab06 100644
--- a/include/net/caif/caif_layer.h
+++ b/include/net/caif/caif_layer.h
@@ -184,7 +184,7 @@ struct cflayer {
* CAIF packet downwards in the stack.
* Packet handling rules:
* - The CAIF packet (cfpkt) ownership is passed to the
- * transmit function. This means that the the packet
+ * transmit function. This means that the packet
* cannot be accessed after passing it to the below
* layer using dn->transmit().
*
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 9bcb220bd4ad..f422729b30c3 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -100,7 +100,7 @@ struct rt6_info {
struct in6_addr rt6i_gateway;
/* Multipath routes:
- * siblings is a list of rt6_info that have the the same metric/weight,
+ * siblings is a list of rt6_info that have the same metric/weight,
* destination, but not the same gateway. nsiblings is just a cache
* to speed up lookup.
*/
diff --git a/include/net/wimax.h b/include/net/wimax.h
index c52b68577cb0..c9705a3eb3b7 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -43,7 +43,7 @@
*
* USAGE
*
- * Embed a `struct wimax_dev` at the beginning of the the device's
+ * Embed a `struct wimax_dev` at the beginning of the device's
* private structure, initialize and register it. For details, see
* `struct wimax_dev`s documentation.
*
diff --git a/include/uapi/asm-generic/fcntl.h b/include/uapi/asm-generic/fcntl.h
index 7543b3e51331..3c8f396825b8 100644
--- a/include/uapi/asm-generic/fcntl.h
+++ b/include/uapi/asm-generic/fcntl.h
@@ -142,7 +142,7 @@
* record locks, but are "owned" by the open file description, not the
* process. This means that they are inherited across fork() like BSD (flock)
* locks, and they are only released automatically when the last reference to
- * the the open file against which they were acquired is put.
+ * the open file against which they were acquired is put.
*/
#define F_OFD_GETLK 36
#define F_OFD_SETLK 37
diff --git a/init/Kconfig b/init/Kconfig
index e84c6423a2e5..19e94edc0ac8 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -848,8 +848,8 @@ config LOG_CPU_MAX_BUF_SHIFT
used as it forces an exact (power of two) size of the ring buffer.
The number of possible CPUs is used for this computation ignoring
- hotplugging making the compuation optimal for the the worst case
- scenerio while allowing a simple algorithm to be used from bootup.
+ hotplugging making the computation optimal for the worst case
+ scenario while allowing a simple algorithm to be used from bootup.
Examples shift values and their meaning:
17 => 128 KB for each CPU
diff --git a/init/main.c b/init/main.c
index bb1aed928f21..ceb26e85e416 100644
--- a/init/main.c
+++ b/init/main.c
@@ -512,7 +512,7 @@ asmlinkage __visible void __init start_kernel(void)
debug_objects_early_init();
/*
- * Set up the the initial canary ASAP:
+ * Set up the initial canary ASAP:
*/
boot_init_stack_canary();
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 9019f15deab2..6e82ca9e2735 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -17,7 +17,7 @@
#ifdef HAVE_JUMP_LABEL
-/* mutex to protect coming/going of the the jump_label table */
+/* mutex to protect coming/going of the jump_label table */
static DEFINE_MUTEX(jump_label_mutex);
void jump_label_lock(void)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 1ce770687ea8..8cd9ce2a6bcc 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2878,7 +2878,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
- * with as many of the the *youngest* kmsg records that fit into it.
+ * with as many of the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
diff --git a/kernel/smp.c b/kernel/smp.c
index aff8aa14f547..c6174667d632 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -622,7 +622,7 @@ EXPORT_SYMBOL(on_each_cpu_mask);
* for all the required CPUs to finish. This may include the local
* processor.
* @cond_func: A callback function that is passed a cpu id and
- * the the info parameter. The function is called
+ * the info parameter. The function is called
* with preemption disabled. The function should
* return a blooean value indicating whether to IPI
* the specified CPU.
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index b38fb2b9e237..612b68cd4599 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2881,7 +2881,7 @@ rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
* This function lets the user discard an event in the ring buffer
* and then that event will not be read later.
*
- * This function only works if it is called before the the item has been
+ * This function only works if it is called before the item has been
* committed. It will try to free the event from the ring buffer
* if another event has not been added behind it.
*
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 1e031f2c9aba..6a76a7f29c3f 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -884,7 +884,7 @@ EXPORT_SYMBOL(bitmap_bitremap);
* read it, you're overqualified for your current job.)
*
* In other words, @orig is mapped onto (surjectively) @dst,
- * using the the map { <n, m> | the n-th bit of @relmap is the
+ * using the map { <n, m> | the n-th bit of @relmap is the
* m-th set bit of @relmap }.
*
* Any set bits in @orig above bit number W, where W is the
diff --git a/lib/dynamic_queue_limits.c b/lib/dynamic_queue_limits.c
index 0777c5a45fa0..2ad6fc394f07 100644
--- a/lib/dynamic_queue_limits.c
+++ b/lib/dynamic_queue_limits.c
@@ -60,7 +60,7 @@ void dql_completed(struct dql *dql, unsigned int count)
* the whole interval (the check above).
*
* If there is slack, the amount of execess data queued above
- * the the amount needed to prevent starvation, the queue limit
+ * the amount needed to prevent starvation, the queue limit
* can be decreased. To avoid hysteresis we consider the
* minimum amount of slack found over several iterations of the
* completion routine.
diff --git a/lib/earlycpio.c b/lib/earlycpio.c
index 3eb3e4722b8e..9d4da0a6a6ed 100644
--- a/lib/earlycpio.c
+++ b/lib/earlycpio.c
@@ -50,7 +50,7 @@ enum cpio_fields {
/**
* cpio_data find_cpio_data - Search for files in an uncompressed cpio
* @path: The directory to search for, including a slash at the end
- * @data: Pointer to the the cpio archive or a header inside
+ * @data: Pointer to the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @nextoff: When a matching file is found, this is the offset from the
* beginning of the cpio to the beginning of the next file, not the
diff --git a/lib/syscall.c b/lib/syscall.c
index e30e03932480..624d80430969 100644
--- a/lib/syscall.c
+++ b/lib/syscall.c
@@ -31,7 +31,7 @@ static int collect_syscall(struct task_struct *target, long *callno,
* @pc: filled with user PC
*
* If @target is blocked in a system call, returns zero with *@callno
- * set to the the call's number and @args filled in with its arguments.
+ * set to the call's number and @args filled in with its arguments.
* Registers not used for system call arguments may not be available and
* it is not kosher to use &struct user_regset calls while the system
* call is still in progress. Note we may get this result if @target
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index eeceeeb09019..fdd76586e1a4 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1308,7 +1308,7 @@ static void return_unused_surplus_pages(struct hstate *h,
* evenly across all nodes with memory. Iterate across these nodes
* until we can no longer free unreserved surplus pages. This occurs
* when the nodes with surplus pages have no free pages.
- * free_pool_huge_page() will balance the the freed pages across the
+ * free_pool_huge_page() will balance the freed pages across the
* on-line nodes with memory and will handle the hstate accounting.
*/
while (nr_pages--) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 18cee0d4c8a2..c9c9b33608f3 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4222,7 +4222,7 @@ static int zone_batchsize(struct zone *zone)
* locking.
*
* Any new users of pcp->batch and pcp->high should ensure they can cope with
- * those fields changing asynchronously (acording the the above rule).
+ * those fields changing asynchronously (according to the above rule).
*
* mutex_is_locked(&pcp_batch_high_lock) required when calling this function
* outside of boot time (or some other assurance that no concurrent updaters
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index faff6247ac8f..9f4c71ba8dd1 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -966,7 +966,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
return 0;
}
-/* Encrypt the the link */
+/* Encrypt the link */
static void hci_conn_encrypt(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 1d9c29a00568..5b2b17522561 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1674,7 +1674,7 @@ static void hci_init3_req(struct hci_request *req, unsigned long opt)
* Delete Stored Link Key command. They are clearly indicating its
* absence in the bit mask of supported commands.
*
- * Check the supported commands and only if the the command is marked
+ * Check the supported commands and only if the command is marked
* as supported send it. If not supported assume that the controller
* does not have actual support for stored link keys which makes this
* command redundant anyway.
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index a88b8524846e..9d83a2e05baf 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1349,7 +1349,7 @@ static void sctp_select_active_and_retran_path(struct sctp_association *asoc)
}
/* We did not find anything useful for a possible retransmission
- * path; either primary path that we found is the the same as
+ * path; either primary path that we found is the same as
* the current one, or we didn't generally find an active one.
*/
if (trans_sec == NULL)
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index 158701da2d31..f0424e16beb7 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -199,7 +199,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3;
max = asoc->frag_point;
- /* If the the peer requested that we authenticate DATA chunks
+ /* If the peer requested that we authenticate DATA chunks
* we need to account for bundling of the AUTH chunks along with
* DATA.
*/
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 6f6b829c9e8e..1ef370a9f675 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -190,7 +190,7 @@ void rpc_destroy_generic_auth(void)
}
/*
- * Test the the current time (now) against the underlying credential key expiry
+ * Test the current time (now) against the underlying credential key expiry
* minus a timeout and setup notification.
*
* The normal case:
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 403078d670a9..b21863009913 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
* @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
* %WIMAX_RF_OFF radio off.
*
- * Reports changes in the software RF switch state to the the WiMAX
+ * Reports changes in the software RF switch state to the WiMAX
* stack.
*
* The main use is during initialization, so the driver can query the
diff --git a/scripts/coccinelle/misc/badty.cocci b/scripts/coccinelle/misc/badty.cocci
index 2fc06fc71927..7bde383f577b 100644
--- a/scripts/coccinelle/misc/badty.cocci
+++ b/scripts/coccinelle/misc/badty.cocci
@@ -3,7 +3,7 @@
//# This makes an effort to find cases where the argument to sizeof is wrong
//# in memory allocation functions by checking the type of the allocated memory
//# when it is a double pointer and ensuring the sizeof argument takes a pointer
-//# to the the memory being allocated. There are false positives in cases the
+//# to the memory being allocated. There are false positives in cases the
//# sizeof argument is not used in constructing the return value. The result
//# may need some reformatting.
//
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index db40fa04cd51..9eb8c74b69a1 100644
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in
kernel/trace/trace_functions.c
The resulted trace is processed into a tree to produce a more human
view of the call stack by drawing textual but hierarchical tree of
-calls. Only the functions's names and the the call time are provided.
+calls. Only the functions's names and the call time are provided.
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
index 3064c6ced87c..7b9769e7985a 100644
--- a/security/apparmor/context.c
+++ b/security/apparmor/context.c
@@ -13,7 +13,7 @@
* License.
*
*
- * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * AppArmor sets confinement on every task, via the aa_task_cxt and
* the aa_task_cxt.profile, both of which are required and are not allowed
* to be NULL. The aa_task_cxt is not reference counted and is unique
* to each cred (which is reference count). The profile pointed to by
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index e26f860e5f2e..112d40974504 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -474,7 +474,7 @@ error:
* keyring, otherwise replace the link to the matching key with a link to the
* new key.
*
- * The key must grant the caller Link permission and the the keyring must grant
+ * The key must grant the caller Link permission and the keyring must grant
* the caller Write permission. Furthermore, if an additional link is created,
* the keyring's quota will be extended.
*
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index ec6a7d0d1886..e3ecc7538f8e 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -5110,7 +5110,7 @@ EXPORT_SYMBOL_GPL(snd_hda_power_save);
* @nid: NID to check / update
*
* Check whether the given NID is in the amp list. If it's in the list,
- * check the current AMP status, and update the the power-status according
+ * check the current AMP status, and update the power-status according
* to the mute status.
*
* This function is supposed to be set or called from the check_power_status
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 98cd1908c039..f193b73de0f2 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -887,7 +887,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec,
static struct snd_kcontrol_new beep_vol_ctl =
HDA_CODEC_VOLUME(NULL, 0, 0, 0);
- /* check for mute support for the the amp */
+ /* check for mute support for the amp */
if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
const struct snd_kcontrol_new *temp;
if (spec->anabeep_nid == nid)
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index f3b491aa3e22..df5cb3b4b6e2 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -31,7 +31,7 @@
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
- * sampling rate. That means the the FPGA doubles the
+ * sampling rate. That means that the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index bddee30a4bc7..eaac777ee91d 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -694,7 +694,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int source)
u64 Kpart;
unsigned int K, Ndiv, Nmod, target;
- /* The the PLL output is always 98.304MHz. */
+ /* The PLL output is always 98.304MHz. */
target = 98304000;
/* If the input frequency is over 14.4MHz then scale it down. */
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index a609aafc994d..3c1c7b71e69b 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -164,7 +164,7 @@ static void fsl_dma_abort_stream(struct snd_pcm_substream *substream)
/**
* fsl_dma_update_pointers - update LD pointers to point to the next period
*
- * As each period is completed, this function changes the the link
+ * As each period is completed, this function changes the link
* descriptor pointers for that period to point to the next period.
*/
static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private)
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index b2c3d0d5dca3..8dc8cc9b8348 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -615,7 +615,7 @@ A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. The DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index b3b8abae62b8..6acad619044b 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -196,7 +196,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
- period being the hist entry period value
- - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option
+ - WEIGHT-A/WEIGHT-B being user suplied weights in the '-c' option
behind ':' separator like '-c wdiff:1,2'.
- WIEGHT-A being the weight of the data file
- WIEGHT-B being the weight of the baseline data file
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index 56bfb523c5bb..6940d8849434 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -35,9 +35,9 @@ The \fB-c MSR#\fP option includes the delta of the specified 32-bit MSR counter.
.PP
The \fB-C MSR#\fP option includes the delta of the specified 64-bit MSR counter.
.PP
-The \fB-m MSR#\fP option includes the the specified 32-bit MSR value.
+The \fB-m MSR#\fP option includes the specified 32-bit MSR value.
.PP
-The \fB-M MSR#\fP option includes the the specified 64-bit MSR value.
+The \fB-M MSR#\fP option includes the specified 64-bit MSR value.
.PP
The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
The default is 5 seconds.
diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
index fd7e9e9d6f4a..1aa7faa0e0e0 100644
--- a/tools/thermal/tmon/pid.c
+++ b/tools/thermal/tmon/pid.c
@@ -38,7 +38,7 @@
/**************************************************************************
* PID (Proportional-Integral-Derivative) controller is commonly used in
- * linear control system, consider the the process.
+ * linear control system, consider the process.
* G(s) = U(s)/E(s)
* kp = proportional gain
* ki = integral gain
--
1.9.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-02 20:06 ` Joe Perches
@ 2014-10-02 20:11 ` Michael Opdenacker
2014-10-02 20:13 ` Michael Opdenacker
0 siblings, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2014-10-02 20:11 UTC (permalink / raw)
To: rdunlap, trivial, joe, akpm, arend, gregkh
Cc: linux-kernel, Michael Opdenacker
Fix all occurrences of "the the ", and occasionally "in in ",
in the source code, comments and documentation.
The replacement couldn't be automated because sometimes
the first "the" was meant to be another word.
Example: "according the the"
meaning: "according to the"
Note that I sometimes took the opportunity to fix
other spelling issues or typos in the same sentences,
and to reformat some comments impacted by the changes.
I also fixed a few checkpatch errors in the same
lines, but not all of them (should be addressed by
separate patches).
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Reviewed-by: rdunlap@infradead.org
---
Documentation/ABI/testing/sysfs-devices-memory | 2 +-
Documentation/DocBook/media/v4l/controls.xml | 2 +-
Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
Documentation/devicetree/bindings/arm/msm/timer.txt | 2 +-
.../devicetree/bindings/ata/cavium-compact-flash.txt | 2 +-
Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt | 2 +-
Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt | 2 +-
Documentation/devicetree/bindings/mtd/fsmc-nand.txt | 2 +-
.../devicetree/bindings/net/broadcom-systemport.txt | 2 +-
Documentation/filesystems/autofs4-mount-control.txt | 4 ++--
Documentation/phy.txt | 2 +-
Documentation/vm/unevictable-lru.txt | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/unwind.h | 2 +-
arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
arch/arm/mach-pxa/stargate2.c | 2 +-
arch/arm64/crypto/aes-neon.S | 2 +-
arch/blackfin/mach-common/entry.S | 2 +-
arch/c6x/platforms/cache.c | 2 +-
arch/ia64/include/asm/spinlock.h | 2 +-
arch/ia64/include/asm/uv/uv_hub.h | 2 +-
arch/m68k/platform/coldfire/intc-2.c | 2 +-
arch/metag/kernel/process.c | 2 +-
arch/microblaze/kernel/entry.S | 2 +-
arch/mips/alchemy/devboards/pm.c | 2 +-
arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
arch/mips/include/asm/spinlock.h | 2 +-
arch/mips/kvm/mips.c | 2 +-
arch/mips/mm/c-octeon.c | 4 ++--
arch/mips/netlogic/xlr/fmn.c | 2 +-
arch/powerpc/include/asm/cache.h | 2 +-
arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
arch/powerpc/kernel/head_64.S | 2 +-
arch/powerpc/mm/gup.c | 2 +-
arch/powerpc/mm/hugetlbpage.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/platforms/chrp/setup.c | 2 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
arch/s390/kernel/perf_cpum_sf.c | 2 +-
arch/s390/mm/gup.c | 2 +-
arch/sparc/kernel/pci.c | 2 +-
arch/sparc/mm/gup.c | 2 +-
arch/tile/include/asm/irqflags.h | 2 +-
arch/tile/include/gxio/trio.h | 2 +-
arch/tile/kernel/single_step.c | 2 +-
arch/x86/include/asm/spinlock.h | 2 +-
arch/x86/include/asm/uv/uv_hub.h | 2 +-
arch/x86/kvm/x86.c | 2 +-
arch/x86/mm/gup.c | 4 ++--
arch/x86/xen/setup.c | 2 +-
arch/xtensa/include/asm/initialize_mmu.h | 2 +-
arch/xtensa/kernel/entry.S | 12 ++++++------
crypto/asymmetric_keys/pkcs7_parser.h | 2 +-
drivers/acpi/acpica/accommon.h | 2 +-
drivers/acpi/acpica/tbfadt.c | 2 +-
drivers/char/apm-emulation.c | 2 +-
drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
drivers/cpuidle/driver.c | 2 +-
drivers/crypto/picoxcell_crypto.c | 2 +-
drivers/crypto/ux500/hash/hash_core.c | 2 +-
drivers/gpio/gpio-ich.c | 2 +-
drivers/gpio/gpio-sch.c | 4 ++--
drivers/gpu/drm/drm_mm.c | 4 ++--
drivers/gpu/drm/i915/i915_gem.c | 2 +-
drivers/gpu/drm/i915/i915_gem_userptr.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 4 ++--
drivers/gpu/drm/radeon/atombios.h | 4 ++--
drivers/gpu/drm/radeon/r300_reg.h | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 2 +-
drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
drivers/gpu/drm/radeon/radeon_vm.c | 4 ++--
drivers/hv/channel.c | 4 ++--
drivers/hv/vmbus_drv.c | 4 ++--
drivers/hwmon/pmbus/ucd9200.c | 2 +-
drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
drivers/infiniband/hw/qib/qib.h | 2 +-
drivers/input/mouse/gpio_mouse.c | 2 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
drivers/lguest/core.c | 2 +-
drivers/media/dvb-frontends/tda1002x.h | 2 +-
drivers/media/dvb-frontends/tda10048.c | 2 +-
drivers/media/pci/cx88/cx88-dsp.c | 2 +-
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/saa7164/saa7164-core.c | 2 +-
drivers/media/platform/davinci/vpbe.c | 2 +-
drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
drivers/media/usb/dvb-usb/friio.c | 2 +-
drivers/media/usb/dvb-usb/friio.h | 2 +-
drivers/media/usb/gspca/finepix.c | 2 +-
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 2 +-
drivers/memory/emif.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/mfd/db8500-prcmu.c | 2 +-
drivers/misc/mic/bus/mic_bus.c | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/ubi/ubi.h | 4 ++--
drivers/mtd/ubi/wl.c | 2 +-
drivers/net/can/xilinx_can.c | 2 +-
drivers/net/ethernet/calxeda/xgmac.c | 2 +-
drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
drivers/net/wimax/i2400m/i2400m.h | 4 ++--
drivers/net/wimax/i2400m/rx.c | 2 +-
drivers/net/wimax/i2400m/tx.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/wcn36xx/hal.h | 8 ++++----
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++--
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 ++--
drivers/net/wireless/mwifiex/debugfs.c | 2 +-
drivers/net/wireless/rsi/rsi_91x_sdio.c | 4 ++--
drivers/net/wireless/ti/wl1251/acx.h | 2 +-
drivers/of/base.c | 2 +-
drivers/pci/hotplug/acpiphp_glue.c | 2 +-
drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 2 +-
drivers/pinctrl/pinctrl-at91.c | 2 +-
drivers/power/power_supply_sysfs.c | 5 +++--
drivers/rtc/rtc-rs5c372.c | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 6 +++---
drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++--
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/remote_device.h | 2 +-
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/spi/spi-ppc4xx.c | 2 +-
drivers/staging/android/ion/ion.c | 2 +-
drivers/staging/android/uapi/binder.h | 2 +-
drivers/staging/et131x/et131x.c | 2 +-
drivers/staging/lustre/lustre/llite/file.c | 2 +-
drivers/staging/lustre/lustre/ptlrpc/pinger.c | 2 +-
drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/rtl8712/rtl871x_cmd.c | 2 +-
drivers/staging/rtl8723au/core/rtw_cmd.c | 2 +-
.../staging/unisys/common-spar/include/channels/iochannel.h | 4 ++--
.../unisys/common-spar/include/channels/vbuschannel.h | 6 +++---
drivers/staging/unisys/virtpci/virtpci.c | 2 +-
drivers/target/target_core_alua.c | 2 +-
drivers/thunderbolt/ctl.h | 2 +-
drivers/usb/host/max3421-hcd.c | 3 +--
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/mos7720.c | 2 +-
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/uwb/drp-ie.c | 2 +-
drivers/video/fbdev/omap/sossi.c | 2 +-
drivers/video/fbdev/sis/sis_accel.c | 2 +-
fs/autofs4/dev-ioctl.c | 2 +-
fs/btrfs/dev-replace.c | 2 +-
fs/btrfs/send.c | 2 +-
fs/btrfs/tree-log.c | 2 +-
fs/dcache.c | 4 ++--
fs/ecryptfs/keystore.c | 2 +-
fs/ext2/ext2.h | 2 +-
fs/ext4/inline.c | 4 ++--
fs/f2fs/segment.h | 2 +-
fs/kernfs/file.c | 2 +-
fs/ocfs2/localalloc.c | 2 +-
fs/xfs/xfs_export.c | 2 +-
include/drm/drm_rect.h | 2 +-
include/linux/mic_bus.h | 2 +-
include/linux/mm.h | 2 +-
include/linux/moduleparam.h | 2 +-
include/linux/skbuff.h | 2 +-
include/net/caif/caif_layer.h | 2 +-
include/net/ip6_fib.h | 2 +-
include/net/wimax.h | 2 +-
include/uapi/asm-generic/fcntl.h | 2 +-
init/Kconfig | 4 ++--
init/main.c | 2 +-
kernel/jump_label.c | 2 +-
kernel/printk/printk.c | 2 +-
kernel/smp.c | 2 +-
kernel/trace/ring_buffer.c | 2 +-
lib/bitmap.c | 2 +-
lib/dynamic_queue_limits.c | 2 +-
lib/earlycpio.c | 2 +-
lib/syscall.c | 2 +-
mm/hugetlb.c | 2 +-
mm/page_alloc.c | 2 +-
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/hci_core.c | 2 +-
net/sctp/associola.c | 2 +-
net/sctp/chunk.c | 2 +-
net/sunrpc/auth_generic.c | 2 +-
net/wimax/op-rfkill.c | 2 +-
scripts/coccinelle/misc/badty.cocci | 2 +-
scripts/tracing/draw_functrace.py | 2 +-
security/apparmor/context.c | 2 +-
security/keys/keyctl.c | 2 +-
sound/pci/hda/hda_codec.c | 2 +-
sound/pci/hda/patch_sigmatel.c | 2 +-
sound/pci/ice1712/prodigy192.c | 2 +-
sound/soc/codecs/wm9713.c | 2 +-
sound/soc/fsl/fsl_dma.c | 2 +-
sound/sparc/dbri.c | 2 +-
tools/perf/Documentation/perf-diff.txt | 2 +-
tools/power/x86/turbostat/turbostat.8 | 4 ++--
tools/thermal/tmon/pid.c | 2 +-
225 files changed, 266 insertions(+), 266 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index 7405de26ee60..4b3c0208d0a5 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -45,7 +45,7 @@ Description:
The file /sys/devices/system/memory/memoryX/state
is read-write. When read, its contents show the
online/offline state of the memory section. When written,
- root can toggle the the online/offline state of a removable
+ root can toggle the online/offline state of a removable
memory section (see removable file description above)
using the following commands.
# echo online > /sys/devices/system/memory/memoryX/state
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 9f5ffd85560b..a232065a7c6a 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3415,7 +3415,7 @@ giving priority to the center of the metered area.</entry>
<row>
<entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant> </entry>
<entry>A multi-zone metering. The light intensity is measured
-in several points of the frame and the the results are combined. The
+in several points of the frame and the results are combined. The
algorithm of the zones selection and their significance in calculating the
final value is device dependent.</entry>
</row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
index f4e28e7d4751..721728745407 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
@@ -267,7 +267,7 @@ is intended for still imaging applications. The idea is to get the
best possible image quality that the hardware can deliver. It is not
defined how the driver writer may achieve that; it will depend on the
hardware and the ingenuity of the driver writer. High quality mode is
-a different mode from the the regular motion video capture modes. In
+a different mode from the regular motion video capture modes. In
high quality mode:<itemizedlist>
<listitem>
<para>The driver may be able to capture higher
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
index c6ef8f13dc7e..74607b6c1117 100644
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -8,7 +8,7 @@ Properties:
"qcom,kpss-timer" - krait subsystem
"qcom,scss-timer" - scorpion subsystem
-- interrupts : Interrupts for the the debug timer, the first general purpose
+- interrupts : Interrupts for the debug timer, the first general purpose
timer, and optionally a second general purpose timer in that
order.
diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
index 93986a5a8018..3bacc8e0931e 100644
--- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
+++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -9,7 +9,7 @@ Properties:
Compatibility with many Cavium evaluation boards.
-- reg: The base address of the the CF chip select banks. Depending on
+- reg: The base address of the CF chip select banks. Depending on
the device configuration, there may be one or two banks.
- cavium,bus-width: The width of the connection to the CF devices. Valid
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
index d63194a2c848..ada4e2973323 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
@@ -39,7 +39,7 @@ Optional Properties:
- lines-initial-states: Bitmask that specifies the initial state of each
line. When a bit is set to zero, the corresponding line will be initialized to
the input (pulled-up) state. When the bit is set to one, the line will be
- initialized the the low-level output state. If the property is not specified
+ initialized the low-level output state. If the property is not specified
all lines will be initialized to the input state.
The I/O expander can detect input state changes, and thus optionally act as
diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
index d9ee909d2b78..d71258e2d456 100644
--- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
@@ -59,7 +59,7 @@ Optional properties:
Each child node represents one channel and has the following
properties:
Required properties:
- * reg: Pair of pins the the channel is connected to.
+ * reg: Pair of pins the channel is connected to.
0: VP/VN
1: VAUXP[0]/VAUXN[0]
2: VAUXP[1]/VAUXN[1]
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index ec42935f3908..5235cbc551b0 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -9,7 +9,7 @@ Required properties:
Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width
defaults to 1 byte
-- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+- nand-skip-bbtscan: Indicates the BBT scanning should be skipped
- timings: array of 6 bytes for NAND timings. The meanings of these bytes
are:
byte 0 TCLR : CLE to RE delay in number of AHB clock cycles, only 4 bits
diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
index aa7ad622259d..877da34145b0 100644
--- a/Documentation/devicetree/bindings/net/broadcom-systemport.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
@@ -3,7 +3,7 @@
Required properties:
- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the the rx
+- interrupts: interrupts for the device, first cell must be for the rx
interrupts, and the second cell should be for the transmit queues. An
optional third interrupt cell for Wake-on-LAN can be specified
- local-mac-address: Ethernet MAC address (48 bits) of this adapter
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index aff22113a986..e54896427b4a 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -373,7 +373,7 @@ variation uses the path and optionally arg1 set to an autofs mount type.
The call returns 1 if this is a mount point and sets arg1 to the device
number of the mount and field arg2 to the relevant super block magic
number (described below) or 0 if it isn't a mountpoint. In both cases
-the the device number (as returned by new_encode_dev()) is returned
+the device number (as returned by new_encode_dev()) is returned
in field arg1.
If supplied with a file descriptor we're looking for a specific mount,
@@ -387,7 +387,7 @@ is one or 0 if it isn't a mountpoint.
If a path is supplied (and the ioctlfd field is set to -1) then the path
is looked up and is checked to see if it is the root of a mount. If a
type is also given we are looking for a particular autofs mount and if
-a match isn't found a fail is returned. If the the located path is the
+a match isn't found a fail is returned. If the located path is the
root of a mount 1 is returned along with the super magic of the mount
or 0 otherwise.
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index c6594af94d25..27fb3656ec8e 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -87,7 +87,7 @@ should contain the phy name as given in the dt data and in the case of
non-dt boot, it should contain the label of the PHY. The two
devm_phy_get associates the device with the PHY using devres on
successful PHY get. On driver detach, release function is invoked on
-the the devres data and devres data is freed. phy_optional_get and
+the devres data and devres data is freed. phy_optional_get and
devm_phy_optional_get should be used when the phy is optional. These
two functions will never return -ENODEV, but instead returns NULL when
the phy cannot be found.
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index 744f82f86c58..441dd2266531 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -453,7 +453,7 @@ putback_lru_page() function to add migrated pages back to the LRU.
mmap(MAP_LOCKED) SYSTEM CALL HANDLING
-------------------------------------
-In addition the mlock()/mlockall() system calls, an application can request
+In addition to the mlock()/mlockall() system calls, an application can request
that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 32cbbd565902..df27c39b2488 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1909,7 +1909,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
+ appended to the device tree bootargs property.
endchoice
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index d1c3f3a71c94..4f697edd0bad 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -22,7 +22,7 @@
#ifndef __ASSEMBLY__
-/* Unwind reason code according the the ARM EABI documents */
+/* Unwind reason code according to the ARM EABI documents */
enum unwind_reason_code {
URC_OK = 0, /* operation completed successfully */
URC_CONTINUE_UNWIND = 8,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 9e91a4e7519a..300bd6c004de 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -753,7 +753,7 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
}
/**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * _init_main_clk - get a struct clk * for the hwmod's main functional clk
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
@@ -791,7 +791,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
}
/**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
@@ -835,7 +835,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
}
/**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 01de542432a6..6f92e75b6c35 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -423,7 +423,7 @@ static void __init imote2_stargate2_init(void)
}
#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
+/* As the imote2 doesn't currently have a conventional SD slot
* there is no option to hotplug cards, making all this rather simple
*/
static int imote2_mci_get_ro(struct device *dev)
diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S
index b93170e1cc93..d0f01cff23b3 100644
--- a/arch/arm64/crypto/aes-neon.S
+++ b/arch/arm64/crypto/aes-neon.S
@@ -47,7 +47,7 @@
prepare .LReverse_Sbox, .LReverse_ShiftRows, \temp
.endm
- /* apply SubBytes transformation using the the preloaded Sbox */
+ /* apply SubBytes transformation using the preloaded Sbox */
.macro sub_bytes, in
sub v9.16b, \in\().16b, v12.16b
tbl \in\().16b, {v16.16b-v19.16b}, \in\().16b
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 86b5a095c5a1..9c8612385e00 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -480,7 +480,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
#ifdef CONFIG_EXACT_HWERR
/* Make sure all pending read/writes complete. This will ensure any
* accesses which could cause hardware errors completes, and signal
- * the the hardware before we do something silly, like crash the
+ * the hardware before we do something silly, like crash the
* kernel. We don't need to work around anomaly 05000312, since
* we are already atomic
*/
diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c
index 86318a16a252..dc21f94aaaaf 100644
--- a/arch/c6x/platforms/cache.c
+++ b/arch/c6x/platforms/cache.c
@@ -437,7 +437,7 @@ void __init c6x_cache_init(void)
if (!cache_base)
return;
- /* Set L2 caches on the the whole L2 SRAM memory */
+ /* Set L2 caches on the whole L2 SRAM memory */
L2_cache_set_mode(L2MODE_SIZE);
/* Enable L1 */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 45698cd15b7b..bd6ea40f3ef9 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -23,7 +23,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
* The pad bits in the middle are used to prevent the next_ticket number
* overflowing into the now_serving number.
*
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index 53e9dfacd073..3ea4168f28f7 100644
--- a/arch/ia64/include/asm/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -257,7 +257,7 @@ static inline int uv_numa_blade_id(void)
return 0;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return 0;
diff --git a/arch/m68k/platform/coldfire/intc-2.c b/arch/m68k/platform/coldfire/intc-2.c
index 995093357c59..f74f0e473119 100644
--- a/arch/m68k/platform/coldfire/intc-2.c
+++ b/arch/m68k/platform/coldfire/intc-2.c
@@ -7,7 +7,7 @@
* family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
* controllers, and the 547x and 548x families which have only one of them.
*
- * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * The external 7 fixed interrupts are part of the Edge Port unit of these
* ColdFire parts. They can be configured as level or edge triggered.
*
* (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff986a23..30052da1f1a4 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -211,7 +211,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
/*
* Get a pointer to where the new child's register block should have
* been pushed.
- * The Meta's stack grows upwards, and the context is the the first
+ * The Meta's stack grows upwards, and the context is the first
* thing to be pushed by TBX (phew)
*/
*childregs = *current_pt_regs();
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 0536bc021cc6..b417be09196d 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -445,7 +445,7 @@ TRAP_return: /* Make global symbol for debugging */
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look like the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index bfeb8f3c0be6..203767dbeb64 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -16,7 +16,7 @@
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
* is to trigger a wakeup.
*/
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index df69bfd2b006..4ec669f5b0d4 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index)
* offsetof() to determine the offsets into packet headers.
* For example, offsetof(ethhdr, protocol) returns the offset
* of the ethernet protocol field. The bitmask selects which
- * bytes to include the the tag, with bit offset X selecting
+ * bytes to include in the tag, with bit offset X selecting
* byte at offset X from the beginning of the packet data.
* @len: Number of bytes to include. Usually this is the sizeof()
* the field.
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index 78d201fb6c87..b6f41f6b6c70 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -31,7 +31,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*/
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index cd7114147ae7..6660ac807d5a 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -1191,7 +1191,7 @@ int __init kvm_mips_init(void)
* requires TLBs. The TLB handling code is statically linked with
* the rest of the kernel (tlb.c) to avoid the possibility of
* double faulting. The issue is that the TLB code references
- * routines that are part of the the KVM module, which are only
+ * routines that are part of the KVM module, which are only
* available once the module is loaded.
*/
kvm_mips_gfn_to_pfn = gfn_to_pfn;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 05b1d7cf9514..1647426364b9 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -350,7 +350,7 @@ static void co_cache_error_call_notifiers(unsigned long val)
}
/*
- * Called when the the exception is recoverable
+ * Called when the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -359,7 +359,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
}
/**
- * Called when the the exception is not recoverable
+ * Called when the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d428e8471eec..1d1eb1e10ae2 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -144,7 +144,7 @@ void xlr_percpu_fmn_init(void)
* For sending FMN messages, we need credits on the destination
* bucket. Program the credits this core has on the 128 possible
* destination buckets.
- * We cannot use a loop here, because the the first argument has
+ * We cannot use a loop here, because the first argument has
* to be a constant integer value.
*/
COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 34a05a1a990b..af6f17b32531 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -52,7 +52,7 @@ static inline void logmpp(u64 x)
/*
* For a snooping icache, we still need a dummy icbi to purge all the
* prefetched instructions from the ifetch buffers. We also need a sync
- * before the icbi to order the the actual stores to memory that might
+ * before the icbi to order the actual stores to memory that might
* have modified instructions with the icbi.
*/
#define PURGE_PREFETCHED_INS \
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index 334459ad145b..b3219b0ca2c4 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -246,7 +246,7 @@ static inline unsigned int ev_int_get_mask(unsigned int interrupt,
* ev_int_eoi - signal the end of interrupt processing
* @interrupt: the interrupt number
*
- * This function signals the end of processing for the the specified
+ * This function signals the end of processing for the specified
* interrupt, which must be the interrupt currently in service. By
* definition, this is also the highest-priority interrupt.
*
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index ac6432d9be46..a18702780733 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -30,7 +30,7 @@ struct arch_hw_breakpoint {
u16 len; /* length of the target data symbol */
};
-/* Note: Don't change the the first 6 bits below as they are in the same order
+/* Note: Don't change the first 6 bits below as they are in the same order
* as the dabr and dabrx.
*/
#define HW_BRK_TYPE_READ 0x01
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index d48125d0c048..01ecece4ca83 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -94,7 +94,7 @@ __secondary_hold_acknowledge:
#ifdef CONFIG_RELOCATABLE
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
- * is used by kexec-tools to keep the the kdump kernel in the
+ * is used by kexec-tools to keep the kdump kernel in the
* crash_kernel region. The loader is responsible for
* observing the alignment requirement.
*/
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index d8746684f606..a97b81d5cfa6 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -168,7 +168,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on powerpc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 7e70ae968e5f..bf66090de7cc 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -933,7 +933,7 @@ void flush_dcache_icache_hugepage(struct page *page)
* (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table
*
* So long as we atomically load page table pointers we are safe against teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 692998244d2c..a2ce00831362 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -9,7 +9,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * This file is a driver for the the General Purpose Timer (gpt) devices
+ * This file is a driver for the General Purpose Timer (gpt) devices
* found on the MPC5200 SoC. Each timer has an IO pin which can be used
* for GPIO or can be used to raise interrupts. The timer function can
* be used independently from the IO pin, or it can be used to control
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 7044fd36197b..864ced973445 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -251,7 +251,7 @@ static void briq_restart(char *cmd)
* Per default, input/output-device points to the keyboard/screen
* If no card is installed, the built-in serial port is used as a fallback.
* But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
- * the the built-in serial node. Instead, a /failsafe node is created.
+ * to the built-in serial node. Instead, a /failsafe node is created.
*/
static void chrp_init_early(void)
{
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index df241b11d4f7..b7bb2977e87a 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1421,7 +1421,7 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
/*
* This function is supposed to be called on basis of PE from top
- * to bottom style. So the the I/O or MMIO segment assigned to
+ * to bottom style. So the I/O or MMIO segment assigned to
* parent PE could be overrided by its child PEs if necessary.
*/
static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index ea0c7b2ef030..a0b4797a296d 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1128,7 +1128,7 @@ static void debug_sample_entry(struct hws_combined_entry *sample,
* combined-sampling data entry consists of a basic- and a diagnostic-sampling
* data entry. The sampling function is determined by the flags in the perf
* event hardware structure. The function always works with a combined-sampling
- * data entry but ignores the the diagnostic portion if it is not available.
+ * data entry but ignores the diagnostic portion if it is not available.
*
* Note that the implementation focuses on basic-sampling data entries and, if
* such an entry is not valid, the entire combined-sampling data entry is
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 639fce464008..2f03d7badf95 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -187,7 +187,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* prevent the pagetables from being freed on s390.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f49478..ef36086d3db1 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -306,7 +306,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
+ * firmware can sample the value before the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index 1aed0432c64b..74ed2d607036 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -189,7 +189,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on sparc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_disable();
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 71af5747874d..f7f64c80c5b2 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -116,7 +116,7 @@
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
* Likewise, INTCTRL_K is removed and re-added during device
- * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * interrupts, as is the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
* to know our current state.
diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h
index df10a662cc25..50a3d5cbad20 100644
--- a/arch/tile/include/gxio/trio.h
+++ b/arch/tile/include/gxio/trio.h
@@ -206,7 +206,7 @@ typedef struct {
/* Initialize a TRIO context.
*
* This function allocates a TRIO "service domain" and maps the MMIO
- * registers into the the caller's VA space.
+ * registers into the caller's VA space.
*
* @param trio_index Which TRIO shim; Gx36 must pass 0.
* @param context Context object to be initialized.
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index de07fa7d1315..c554ffbb50f7 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -277,7 +277,7 @@ P("\n");
/*
* Called after execve() has started the new image. This allows us
- * to reset the info state. Note that the the mmap'ed memory, if there
+ * to reset the info state. Note that the mmap'ed memory, if there
* was any, has already been unmapped by the exec.
*/
void single_step_execve(void)
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index 54f1c8068c02..04266c294db1 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -71,7 +71,7 @@ static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*
* We use an xadd covering *both* parts of the lock, to increment the tail and
* also load the position of the head, which takes care of memory ordering
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index c63e925fd6b7..361144223ed7 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -512,7 +512,7 @@ static inline int uv_numa_blade_id(void)
return uv_hub_info->numa_blade_id;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return uv_cpu_to_blade[cpu];
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 8f1e22d3b286..5dc89fb405be 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7219,7 +7219,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
if (current->mm == kvm->mm) {
/*
* Free memory regions allocated on behalf of userspace,
- * unless the the memory map has changed due to process exit
+ * unless the memory map has changed due to process exit
* or fd copying.
*/
struct kvm_userspace_memory_region mem;
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 207d9aef662d..a1f84cebb9aa 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -288,7 +288,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
@@ -360,7 +360,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_disable();
pgdp = pgd_offset(mm, addr);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 2e555163c2fe..80e25d7659a2 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -472,7 +472,7 @@ char * __init xen_memory_setup(void)
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
- * We tried to make the the memblock_reserve more selective so
+ * We tried to make the memblock_reserve more selective so
* that it would be clear what region is reserved. Sadly we ran
* in the problem wherein on a 64-bit hypervisor with a 32-bit
* initial domain, the pt_base has the cr3 value which is not
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 600781edc8a3..2e1d20d0b71f 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -6,7 +6,7 @@
* For the new V3 MMU we remap the TLB from virtual == physical
* to the standard Linux mapping used in earlier MMU's.
*
- * The the MMU we also support a new configuration register that
+ * In the MMU we also support a new configuration register that
* specifies how the S32C1I instruction operates with the cache
* controller.
*
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 82bbfa5a05b3..7cb1512849e4 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -384,7 +384,7 @@ common_exception:
/* Save optional registers. */
save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
-
+
#ifdef CONFIG_TRACE_IRQFLAGS
l32i a4, a1, PT_DEPC
/* Double exception means we came here with an exception
@@ -433,7 +433,7 @@ common_exception_return:
* We need to check some flags for signal handling and rescheduling,
* and have to restore WB and WS, extra states, and all registers
* in the register file that were in use in the user task.
- * Note that we don't disable interrupts here.
+ * Note that we don't disable interrupts here.
*/
_bbsi.l a4, TIF_NEED_RESCHED, 3f
@@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
* of the proper size instead.
*
* This algorithm simply backs out the register changes started by the user
- * excpetion handler, makes it appear that we have started a window underflow
+ * exception handler, makes it appear that we have started a window underflow
* by rotating the window back and then setting the old window base (OWB) in
* the 'ps' register with the rolled back window base. The 'movsp' instruction
* will be re-executed and this time since the next window frames is in the
* active AR registers it won't cause an exception.
*
* If the WindowUnderflow code gets a TLB miss the page will get mapped
- * the the partial windeowUnderflow will be handeled in the double exception
+ * and the partial windowUnderflow will be handled in the double exception
* handler.
*
* Entry condition:
@@ -1567,8 +1567,8 @@ ENTRY(fast_second_level_miss)
2: /* Special case for cache aliasing.
* We (should) only get here if a clear_user_page, copy_user_page
- * or the aliased cache flush functions got preemptively interrupted
- * by another task. Re-establish temporary mapping to the
+ * or the aliased cache flush functions got preemptively interrupted
+ * by another task. Re-establish temporary mapping to the
* TLBTEMP_BASE areas.
*/
diff --git a/crypto/asymmetric_keys/pkcs7_parser.h b/crypto/asymmetric_keys/pkcs7_parser.h
index d25f4d15370f..31a2ee79dae7 100644
--- a/crypto/asymmetric_keys/pkcs7_parser.h
+++ b/crypto/asymmetric_keys/pkcs7_parser.h
@@ -42,7 +42,7 @@ struct pkcs7_signed_info {
*
* This contains the generated digest of _either_ the Content Data or
* the Authenticated Attributes [RFC2315 9.3]. If the latter, one of
- * the attributes contains the digest of the the Content Data within
+ * the attributes contains the digest of the Content Data within
* it.
*/
struct public_key_signature sig;
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 6f1c616910ac..826a754954f3 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -47,7 +47,7 @@
/*
* Common set of includes for all ACPICA source files.
* We put them here because we don't want to duplicate them
- * in the the source code again and again.
+ * in the source code again and again.
*
* Note: The order of these include files is important.
*/
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 41519a958083..75e61da5d998 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -435,7 +435,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
* The 64-bit X fields are optional extensions to the original 32-bit FADT
* V1.0 fields. Even if they are present in the FADT, they are optional and
* are unused if the BIOS sets them to zero. Therefore, we must copy/expand
- * 32-bit V1.0 fields to the 64-bit X fields if the the 64-bit X field is
+ * 32-bit V1.0 fields to the 64-bit X fields if the 64-bit X field is
* originally zero.
*
* For ACPI 1.0 FADTs (that contain no 64-bit addresses), all 32-bit address
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index dd9dfa15e9d1..d086acf9562f 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -563,7 +563,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
wake_up_interruptible(&apm_waitqueue);
/*
- * Wait for the the suspend_acks_pending variable to drop to
+ * Wait for the suspend_acks_pending variable to drop to
* zero, meaning everybody acked the suspend event (or the
* process was killed.)
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 02225eb19cf6..619f3a30ec55 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -111,7 +111,7 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
}
/**
- * fifo_icap_set_read_size - Set the the size register.
+ * fifo_icap_set_read_size - Set the size register.
* @drvdata: a pointer to the drvdata.
* @data: the size of the following read transaction, in words.
**/
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index e431d11abf8d..231f0149c540 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -168,7 +168,7 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv)
/*
* Look for the timer stop flag in the different states, so that we know
* if the broadcast timer has to be set up. The loop is in the reverse
- * order, because usually one of the deeper states have this flag set.
+ * order, because usually one of the deeper states has this flag set.
*/
for (i = drv->state_count - 1; i >= 0 ; i--) {
if (drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP) {
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 5da5b98b8f29..60f2267c1350 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -53,7 +53,7 @@
#define CMD0_IRQ_THRESHOLD 1
/*
- * The timeout period (in jiffies) for a PDU. When the the number of PDUs in
+ * The timeout period (in jiffies) for a PDU. When the number of PDUs in
* flight is greater than the STAT_IRQ_THRESHOLD or 0 the timer is disabled.
* When there are packets in flight but lower than the threshold, we enable
* the timer and at expiry, attempt to remove any processed packets from the
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 1c73f4fbc252..2f2a4276a014 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -435,7 +435,7 @@ static int hash_get_device_data(struct hash_ctx *ctx,
* @keylen: The lengt of the key.
*
* Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the the hw design spec. Either due to incorrect info in the
+ * specified in the hw design spec. Either due to incorrect info in the
* spec or due to a bug in the hw.
*/
static void hash_hw_write_key(struct hash_device_data *device_data,
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 3784e81e7762..d548a717d5b9 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -471,7 +471,7 @@ static int ichx_gpio_probe(struct platform_device *pdev)
/*
* If necessary, determine the I/O address of ACPI/power management
- * registers which are needed to read the the GPE0 register for GPI pins
+ * registers which are needed to read the GPE0 register for GPI pins
* 0 - 15 on some chipsets.
*/
if (!ichx_priv.desc->uses_gpe0)
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 41e91d70301e..9b43e701db28 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -111,7 +111,7 @@ static int sch_gpio_core_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
@@ -201,7 +201,7 @@ static int sch_gpio_resume_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 04a209e2b66d..ff92d4c5e379 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -529,12 +529,12 @@ EXPORT_SYMBOL(drm_mm_replace_node);
*
* The DRM range allocator supports this use-case through the scanning
* interfaces. First a scan operation needs to be initialized with
- * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The the driver adds
+ * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The driver adds
* objects to the roaster (probably by walking an LRU list, but this can be
* freely implemented) until a suitable hole is found or there's no further
* evitable object.
*
- * The the driver must walk through all objects again in exactly the reverse
+ * The driver must walk through all objects again in exactly the reverse
* order to restore the allocator state. Note that while the allocator is used
* in the scan mode no other operation is allowed.
*
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ad55b06a3cb1..a73c82dff95f 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2366,7 +2366,7 @@ int __i915_add_request(struct intel_engine_cs *ring,
/* Whilst this request exists, batch_obj will be on the
* active_list, and so will hold the active reference. Only when this
- * request is retired will the the batch_obj be moved onto the
+ * request is retired will the batch_obj be moved onto the
* inactive_list and lose its active reference. Hence we do not need
* to explicitly hold another reference here.
*/
diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c
index d38413997379..7a6a4fed2833 100644
--- a/drivers/gpu/drm/i915/i915_gem_userptr.c
+++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
@@ -225,7 +225,7 @@ i915_mmu_notifier_add(struct drm_device *dev,
* either has cancelled gup work queued and we need to
* return back to the user to give time for the gup-workers
* to flush their object references upon which the object will
- * be removed from the interval-tree, or the the range is
+ * be removed from the interval-tree, or the range is
* still in use by another client and the overlap is invalid.
*
* If we do have an overlap, we cannot use the interval tree
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d8324c69fa86..7b3d64f2ad3f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2607,7 +2607,7 @@ void intel_display_handle_reset(struct drm_device *dev)
* will get its events and not get stuck.
*
* Also update the base address of all primary
- * planes to the the last fb to make sure we're
+ * planes to the last fb to make sure we're
* showing the correct fb after a reset.
*
* Need to make two loops over the crtcs so that we
@@ -10854,7 +10854,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
}
/* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
+ * update the output configuration. */
intel_modeset_update_state(dev, prepare_pipes);
if (dev_priv->display.modeset_global_resources)
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 92be50c39ffd..2be3040b28f1 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -2802,8 +2802,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t
ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 00c0d2ba22d3..36af5f14f622 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -353,7 +353,7 @@
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 12c8329644c4..212cc45defc7 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -379,7 +379,7 @@ void radeon_doorbell_free(struct radeon_device *rdev, u32 doorbell)
/*
* radeon_wb_*()
- * Writeback is the the method by which the the GPU updates special pages
+ * Writeback is the method by which the GPU updates special pages
* in memory with the status of certain GPU events (fences, ring pointers,
* etc.).
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 913787085dfa..d616aea4a52c 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -45,7 +45,7 @@
* for GPU/CPU synchronization. When the fence is written,
* it is expected that all buffers associated with that fence
* are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed. Whether
+ * that the relevant GPU caches have been flushed. Whether
* we use a scratch register or memory location depends on the asic
* and whether writeback is enabled.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c
index 088ffdc2f577..6dbaac58c81e 100644
--- a/drivers/gpu/drm/radeon/radeon_vm.c
+++ b/drivers/gpu/drm/radeon/radeon_vm.c
@@ -40,8 +40,8 @@
* can be mapped as snooped (cached system pages) or unsnooped
* (uncached system pages).
* Each VM has an ID associated with it and there is a page table
- * associated with each VMID. When execting a command buffer,
- * the kernel tells the the ring what VMID to use for that command
+ * associated with each VMID. When executing a command buffer,
+ * the kernel tells the ring what VMID to use for that command
* buffer. VMIDs are allocated dynamically as commands are submitted.
* The userspace drivers maintain their own address space and the kernel
* sets up their pages tables accordingly when they submit their
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 531a593912ec..90947e08e44d 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -553,7 +553,7 @@ EXPORT_SYMBOL_GPL(vmbus_close);
* vmbus_sendpacket() - Send the specified buffer on the given channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @requestid: Identifier of the request
* @type: Type of packet that is being send e.g. negotiate, time
* packet etc.
@@ -730,7 +730,7 @@ EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
* vmbus_recvpacket() - Retrieve the user packet on the specified channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @buffer_actual_len: The actual size of the data after it was received
* @requestid: Identifier of the request
*
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 4d6b26979fbd..5a358e591403 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -849,8 +849,8 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the information we
- * need from DSDT.
+ * VMBUS is an acpi enumerated device. Get the IRQ information
+ * from DSDT.
*/
static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index 033d6aca47d3..d41d7e3bf31c 100644
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -117,7 +117,7 @@ static int ucd9200_probe(struct i2c_client *client,
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
- * for the the phases of the rail.
+ * for the phases of the rail.
*/
for (i = 0; i < info->pages; i++) {
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 28cfe97cf1e9..231b54591e2b 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -87,7 +87,7 @@
* These 3 values (SDR and DDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
+ * are also the possible values for ipath_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define IPATH_IB_SDR 1
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index c00ae093b6f8..6b6499a690af 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -333,7 +333,7 @@ struct qib_verbs_txreq {
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for qib_link_speed_enabled and active
+ * are also the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 8c7d94200bdb..c1418e619f0c 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -17,7 +17,7 @@
/*
* Timer function which is run every scan_ms ms when the device is opened.
- * The dev input variable is set to the the input_dev pointer.
+ * The dev input variable is set to the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_polled_dev *dev)
{
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 114f3bcba1b0..24c15bfb2199 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1566,7 +1566,7 @@ reset_hfcsusb(struct hfcsusb *hw)
write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
((hw->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 6590558d1d31..010d3c6cd5f4 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -202,7 +202,7 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
/*:*/
/*H:030
- * Let's jump straight to the the main loop which runs the Guest.
+ * Let's jump straight to the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
* going around and around until something interesting happens.
*/
diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h
index e404b6e44802..ce0fb855c705 100644
--- a/drivers/media/dvb-frontends/tda1002x.h
+++ b/drivers/media/dvb-frontends/tda1002x.h
@@ -1,6 +1,6 @@
/*
TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index 71fb63299de7..17534ff576ca 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1134,7 +1134,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
state->pll_pfactor = 0;
}
- /* Establish any defaults the the user didn't pass */
+ /* Establish any defaults the user didn't pass */
tda10048_establish_defaults(&state->frontend);
/* Set the xtal and freq defaults */
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..1f8820f5f8c0 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -37,7 +37,7 @@
(compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
/* We calculate the baseband frequencies of the carrier and the pilot tones
- * based on the the sampling rate of the audio rds fifo. */
+ * based on the sampling rate of the audio rds fifo. */
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index 2ad65eb29832..00e0818abfc9 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -555,7 +555,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f)
reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94);
/* Okay, we've wasted time working out the correct value,
- but if we use it, it fouls the the window alignment.
+ but if we use it, it fouls the window alignment.
Fudge it to what we want... */
reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16));
reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16));
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 1bf06970ca3e..ab627dfd7b28 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -636,7 +636,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
}
/* Check that the hardware is accessible. If the status bytes are
- * 0xFF then the device is not accessible, the the IRQ belongs
+ * 0xFF then the device is not accessible, the IRQ belongs
* to another driver.
* 4 x u32 interrupt registers.
*/
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 33b9660b7f77..6ea16e20449d 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -316,7 +316,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
* vpbe_get_output - Get output
* @vpbe_dev - vpbe device ptr
*
- * return current vpbe output to the the index
+ * return current vpbe output to the index
*/
static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
{
diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 3d2babd5067a..b8181874a149 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -505,7 +505,7 @@ static int fimc_capture_open(struct file *file)
if (ret == 0 && vc->user_subdev_api && vc->inh_sensor_ctrls) {
/*
- * Recreate controls of the the video node to drop
+ * Recreate controls of the video node to drop
* any controls inherited from the sensor subdev.
*/
fimc_ctrls_delete(vc->ctx);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 2c7aa6720569..5b8a0e779d0f 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1710,7 +1710,7 @@ void omap3isp_print_status(struct isp_device *isp)
* To solve this problem power management support is split into prepare/complete
* and suspend/resume operations. The pipelines are stopped in prepare() and the
* ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
- * resume(), and the the pipelines are restarted in complete().
+ * resume(), and the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not modelled explicitly
* yet.
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index d56f927fc31a..b5d2e805380d 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 474a17e4db0c..4c7f8fed8046 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h
index 0f461ca10cb9..82d19dcdebc0 100644
--- a/drivers/media/usb/dvb-usb/friio.h
+++ b/drivers/media/usb/dvb-usb/friio.h
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
index 52bdb569760b..414c1b752911 100644
--- a/drivers/media/usb/gspca/finepix.c
+++ b/drivers/media/usb/gspca/finepix.c
@@ -143,7 +143,7 @@ again:
* for, then it's the end of the
* frame. Sometimes the jpeg is not complete,
* but there's nothing we can do. We also end
- * here if the the jpeg ends right at the end
+ * here if the jpeg ends right at the end
* of the frame. */
gspca_frame_add(gspca_dev, LAST_PACKET,
data, len);
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 2e8c3afe4ec4..b7b5a1f630af 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1313,7 +1313,7 @@ static int tm6000_usb_probe(struct usb_interface *interface,
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
-/* check if the the device has the iso in endpoint at the correct place */
+/* check if the device has the iso in endpoint at the correct place */
if (!dev->isoc_in.endp) {
printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
rc = -ENODEV;
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 9144a2f3ed82..62adffa2bd50 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1000,7 +1000,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
}
/* Synchronize to the input stream by waiting for the FID bit to be
- * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE.
* stream->last_fid is initialized to -1, so the first isochronous
* frame will always be in sync.
*
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index d15e16737eef..32d8d6a07e99 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -981,7 +981,7 @@ static void v4l_sanitize_format(struct v4l2_format *fmt)
/*
* The v4l2_pix_format structure has been extended with fields that were
* not previously required to be set to zero by applications. The priv
- * field, when set to a magic value, indicates the the extended fields
+ * field, when set to a magic value, indicates that the extended fields
* are valid. Otherwise they will contain undefined values. To simplify
* the API towards drivers zero the extended fields and set the priv
* field to the magic value when the extended pixel format structure
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 04644e7b42b1..303b322756c7 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -373,7 +373,7 @@ static const struct lpddr2_addressing *get_addressing_table(
}
/*
- * Find the the right timing table from the array of timing
+ * Find the right timing table from the array of timing
* tables of the device using DDR clock frequency
*/
static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 787933d43d32..4328cf6ecf13 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
* @target: per target private data
* @sdev: SCSI device
*
- * Update the target negotiation parameters based on the the Inquiry
+ * Update the target negotiation parameters based on the Inquiry
* data, adapter capabilities, and NVRAM settings.
**/
static void
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 193cf168ba84..5d03af1f5103 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -898,7 +898,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
- * This function sets the the operating point of the ARM.
+ * This function sets the operating point of the ARM.
*/
int db8500_prcmu_set_arm_opp(u8 opp)
{
diff --git a/drivers/misc/mic/bus/mic_bus.c b/drivers/misc/mic/bus/mic_bus.c
index 961ae90aae47..1b15af8c5101 100644
--- a/drivers/misc/mic/bus/mic_bus.c
+++ b/drivers/misc/mic/bus/mic_bus.c
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ drivers/virtio/virtio.c
*/
#include <linux/slab.h>
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 913de07e577c..6482a9c4eb44 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -48,7 +48,7 @@
* kernel/user requirements.
*
* Blade percpu resources reserved for kernel use. These resources are
- * reserved whenever the the kernel context for the blade is loaded. Note
+ * reserved whenever the kernel context for the blade is loaded. Note
* that the kernel context is not guaranteed to be always available. It is
* loaded on demand & can be stolen by a user if the user demand exceeds the
* kernel demand. The kernel can always reload the kernel context but
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 95c894482fdd..f87520cfb787 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1594,7 +1594,7 @@ out_2:
* by xpc_notify_senders_of_disconnect_uv(), and to also get an
* error returned here will confuse them. Additionally, since
* in this case the channel is being disconnected we don't need
- * to put the the msg_slot back on the free list.
+ * to put the msg_slot back on the free list.
*/
if (cmpxchg(&msg_slot->func, func, NULL) != func) {
ret = xpSuccess;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 959cb9b70310..c5b1237ecb33 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -942,7 +942,7 @@ static uint8_t gpmi_read_byte(struct mtd_info *mtd)
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
- * because the the operations are the same.
+ * because the operations are the same.
*/
static void block_mark_swapping(struct gpmi_nand_data *this,
void *payload, void *auxiliary)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 7bf416329c19..3430b17875b5 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -252,7 +252,7 @@ struct ubi_fm_pool {
/**
* struct ubi_volume - UBI volume description data structure.
- * @dev: device object to make use of the the Linux device model
+ * @dev: device object to make use of the Linux device model
* @cdev: character device object to create character device
* @ubi: reference to the UBI device description object
* @vol_id: volume ID
@@ -380,7 +380,7 @@ struct ubi_debug_info {
/**
* struct ubi_device - UBI device description structure
- * @dev: UBI device object to use the the Linux device model
+ * @dev: UBI device object to use for the Linux device model
* @cdev: character device object to create character device
* @ubi_num: UBI device number
* @ubi_name: UBI device name
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 20f491713145..72b64109a22f 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -727,7 +727,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
/**
* sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
- * @e: the the physical eraseblock to erase
+ * @e: the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
*
* This function returns zero in case of success and a negative error code in
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 5e8b5609c067..ad5bfe8618a6 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -532,7 +532,7 @@ static int xcan_rx(struct net_device *ndev)
* @isr: interrupt status register value
*
* This is the CAN error interrupt and it will
- * check the the type of error and forward the error
+ * check the type of error and forward the error
* frame to upper layers.
*/
static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index 25d6b2a10e4e..a6fa3c211f69 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1234,7 +1234,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
* @budget : maximum number of packets that the current CPU can receive from
* all interfaces.
* Description :
- * This function implements the the reception process.
+ * This function implements the reception process.
* Also it runs the TX completion thread
*/
static int xgmac_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 93ff8ef39352..50a7353a85c8 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2363,7 +2363,7 @@ static irqreturn_t be_intx(int irq, void *dev)
}
be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- /* Return IRQ_HANDLED only for the the first spurious intr
+ /* Return IRQ_HANDLED only for the first spurious intr
* after a valid intr to stop the kernel from branding
* this irq as a bad one!
*/
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 1acf5034db10..ee82072b4c08 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -3986,7 +3986,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
* @hw: Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*/
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 48b74a549155..392eb5748897 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3892,7 +3892,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
* @hw: pointer to the HW structure
*
* ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
- * register, so the the bus width is hard coded.
+ * register, so the bus width is hard coded.
**/
static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 236a6183a865..0172e6b70eee 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2166,7 +2166,7 @@ out:
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 87bd53fdd209..81e6836f38ee 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -229,7 +229,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
struct pci_dev *pdev;
- /* determine whether to use the the parent device
+ /* determine whether to use the parent device
*/
if (ixgbe_pcie_from_parent(&adapter->hw))
pdev = adapter->pdev->bus->parent->self;
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index f5e4b820128b..aad8fdb4dfc6 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2158,7 +2158,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
/*
* In PCI 33 mode, the P_PLL is not used, and therefore,
- * the the P_PLL_LOCK bit in the adapter_status register will
+ * the P_PLL_LOCK bit in the adapter_status register will
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 3b67d60d4378..b8da6e89059a 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -83,7 +83,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* returns: 0 on success, -ETIMEDOUT on a timeout
*
* Writes the value to the requested register by first writing the value
- * into MWD register. The the MCR register is then appropriately setup
+ * into MWD register. The MCR register is then appropriately setup
* to finish the write operation.
*/
static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 5a34e72bab9a..6113a29f01bc 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -250,14 +250,14 @@ struct i2400m_barker_db;
*
* @bus_setup: [optional fill] Function called by the bus-generic code
* [i2400m_setup()] to setup the basic bus-specific communications
- * to the the device needed to load firmware. See LIFE CYCLE above.
+ * to the device needed to load firmware. See LIFE CYCLE above.
*
* NOTE: Doesn't need to upload the firmware, as that is taken
* care of by the bus-generic code.
*
* @bus_release: [optional fill] Function called by the bus-generic
* code [i2400m_release()] to shutdown the basic bus-specific
- * communications to the the device needed to load firmware. See
+ * communications to the device needed to load firmware. See
* LIFE CYCLE above.
*
* This function does not need to reset the device, just tear down
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 0b602951ff6b..4466ee71d1e4 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -693,7 +693,7 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq,
* right spot where to insert the packet; we know the queue is
* not empty, so we are not the first ones; we also know we
* are not going to be the last ones. The list is sorted, so
- * we have to insert before the the first guy with an nsn_itr
+ * we have to insert before the first guy with an nsn_itr
* greater that our nsn. */
skb_queue_walk(&roq->queue, skb_itr) {
roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb;
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index f20886ade1cc..1f7b2b922fae 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -233,7 +233,7 @@
* i2400m_tx_skip_tail() Marks unusable FIFO tail space
* i2400m->bus_tx_kick()
*
- * Now i2400m->bus_tx_kick() is the the bus-specific driver backend
+ * Now i2400m->bus_tx_kick() is the bus-specific driver backend
* implementation; that would do:
*
* i2400m->bus_tx_kick()
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index 1c584c4b019c..f34f24d362ed 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -77,7 +77,7 @@ struct rx_attention {
* first_msdu is set.
*
* peer_idx_invalid
- * Indicates no matching entries within the the max search
+ * Indicates no matching entries within the max search
* count. Only set when first_msdu is set.
*
* peer_idx_timeout
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index dc6bd8cd9b83..e32154fe1732 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -98,7 +98,7 @@ struct bus_request {
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- * implemented using the asynchronous mode allowing the the bus
+ * implemented using the asynchronous mode allowing the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 339d89f14d32..8c866de2fe43 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1173,7 +1173,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
* Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
+ * response is available in the FIFO
*
* CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index 9a2afa2c690b..5184d6cbcb90 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -638,7 +638,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN,
AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT);
- /* on AR92xx, the highest bit of count will make the the chip send
+ /* on AR92xx, the highest bit of count will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 542a8d51d3b0..5c8f1e6da5dc 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1627,7 +1627,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
- /* on AR93xx and newer, count = 0 will make the the chip send
+ /* on AR93xx and newer, count = 0 will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index a1f1127d7808..24cce9db3ce0 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -1609,7 +1609,7 @@ struct wcn36xx_hal_config_bss_params {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -1746,7 +1746,7 @@ struct wcn36xx_hal_config_bss_params_v1 {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -3736,10 +3736,10 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
/* success or failure */
u32 status;
- /* Length of the responce message */
+ /* Length of the response message */
u32 rsp_length;
- /* FIXME: Currently considering the the responce will be less than
+ /* FIXME: Currently considering that the response will be less than
* 100bytes */
u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
} __packed;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 1b474828d5b8..46a0d6575454 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3819,7 +3819,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
}
/*
- * Suspend the the MAC and update the slot timing
+ * Suspend the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index d6073f67b212..c2f550cfbf41 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -189,7 +189,7 @@ enum iwl_tx_flags {
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
+ * @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @key: security key
* @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
@@ -552,7 +552,7 @@ struct iwl_extended_beacon_notif {
/**
* enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
+ * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
index 6cc243f7cf60..8357397cf7d0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
@@ -65,7 +65,7 @@
#include "fw-api.h"
#include "mvm.h"
-/* Maps the driver specific channel width definition to the the fw values */
+/* Maps the driver specific channel width definition to the fw values */
static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
{
switch (chandef->width) {
@@ -86,7 +86,7 @@ static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
/*
* Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
+ * freq) definitions to the fw values
*/
static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index 2713f7acd35e..53618b0e29c0 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -262,7 +262,7 @@ free_and_exit:
* This function is called when the 'fw_dump' file is opened for
* reading.
* This function dumps firmware memory in different files
- * (ex. DTCM, ITCM, SQRAM etc.) based on the the segments for
+ * (ex. DTCM, ITCM, SQRAM etc.) based on the segments for
* debugging.
*/
static ssize_t
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 8428858204a6..e1f05ad89d9e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -596,7 +596,7 @@ static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
* rsi_sdio_host_intf_read_pkt() - This function reads the packet
from the device.
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
* @length: Length of the data to be read from the device.
*
* Return: 0 on success, -1 on failure.
@@ -627,7 +627,7 @@ int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter,
* rsi_init_sdio_interface() - This function does init specific to SDIO.
*
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
*
* Return: 0 on success, -1 on failure.
*/
diff --git a/drivers/net/wireless/ti/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h
index 2bdec38699f4..bfe998947957 100644
--- a/drivers/net/wireless/ti/wl1251/acx.h
+++ b/drivers/net/wireless/ti/wl1251/acx.h
@@ -1243,7 +1243,7 @@ struct wl1251_acx_arp_filter {
u8 address[16]; /* The IP address used to filter ARP packets.
ARP packets that do not match this address are
dropped. When the IP Version is 4, the last 12
- bytes of the the address are ignored. */
+ bytes of the address are ignored. */
} __attribute__((packed));
struct wl1251_acx_ac_cfg {
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 293ed4b687ba..be53777b9f3d 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1849,7 +1849,7 @@ static void of_alias_add(struct alias_prop *ap, struct device_node *np,
* of_alias_scan - Scan all properties of 'aliases' node
*
* The function scans all the properties of 'aliases' node and populate
- * the the global lookup table with the properties. It returns the
+ * the global lookup table with the properties. It returns the
* number of alias_prop found, or error code in error case.
*
* @dt_alloc: An allocator that provides a virtual address to memory
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 6cd5160fc057..89f16d320ead 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -36,7 +36,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#define pr_fmt(fmt) "acpiphp_glue: " fmt
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
index 7dfef3ee5b53..40511e39cea5 100644
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ b/drivers/pcmcia/pxa2xx_hx4700.c
@@ -33,7 +33,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/*
* IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
* The asic3 default IRQ type is level trigger low level detect, exactly
- * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+ * the signal present on GPIOD4_CF_nCD when a CF card is inserted.
* If the IRQ type is not changed, the asic3 interrupt handler will loop
* repeatedly because it is unable to clear the level trigger interrupt.
*/
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index e7cab07eef47..37060a07f260 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1250,7 +1250,7 @@ static int nmk_gpio_probe(struct platform_device *dev)
platform_set_drvdata(dev, nmk_chip);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 60464a2648aa..67a538ebea90 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1461,7 +1461,7 @@ static int at91_gpio_of_irq_setup(struct device_node *node,
writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 750a20275664..b01c7698df02 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -298,8 +298,9 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
ret = power_supply_show_property(dev, attr, prop_buf);
if (ret == -ENODEV || ret == -ENODATA) {
- /* When a battery is absent, we expect -ENODEV. Don't abort;
- send the uevent with at least the the PRESENT=0 property */
+ /* When a battery is absent, we expect -ENODEV.
+ * Don't abort; send the uevent with at least
+ * the PRESENT=0 property */
ret = 0;
continue;
}
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index ccf54f06396b..2108302cc965 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -122,7 +122,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
- * configurations, so we use the the first method there, stripping off
+ * configurations, so we use the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index fd22c811cbe1..8a84e2e42ca2 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3454,7 +3454,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 2035b0d64351..e62a7346428a 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1983,7 +1983,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
/*
* Device's PID has changed. We need to cleanup
* and re-login. If there is another device with
- * the the newly discovered pid, send an scn notice
+ * the newly discovered pid, send an scn notice
* so that its new pid can be discovered.
*/
list_for_each(qe, &rport->port->rport_q) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 00ee0ed642aa..0b88610b9795 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -510,7 +510,7 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
* @skb: The receive skb
* @netdev: The associated net device
* @ptype: The packet_type structure which was used to register this handler
- * @orig_dev: The original net_device the the skb was received on.
+ * @orig_dev: The original net_device that the skb was received on.
* (in case dev is a bond)
*
* Returns: 0 for success
@@ -2727,7 +2727,7 @@ module_exit(fcoe_exit);
* fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
* @seq: active sequence in the FLOGI or FDISC exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
@@ -2756,7 +2756,7 @@ done:
* fcoe_logo_resp() - FCoE specific LOGO response handler
* @seq: active sequence in the LOGO exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 34a1b1f333b4..65a53a9eb059 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -213,7 +213,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new)
* that doesn't have a priv (fcf was deleted). However,
* libfcoe will always delete FCFs before trying to add
* them. This is ensured because both recv_adv and
- * age_fcfs are protected by the the fcoe_ctlr's mutex.
+ * age_fcfs are protected by the fcoe_ctlr's mutex.
* This means that we should never get a FCF with a
* non-NULL priv pointer.
*/
@@ -694,7 +694,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
*
* The caller must check that the length is a multiple of 4.
* The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
- * The the skb must also be an fc_frame.
+ * The skb must also be an fc_frame.
*
* This is called from the lower-level driver with spinlocks held,
* so we must not take a mutex here.
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 22a9bb1abae1..025ec5c10978 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -244,7 +244,7 @@ enum sci_controller_states {
SCIC_INITIALIZED,
/**
- * This state indicates the the controller is in the process of becoming
+ * This state indicates that the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 47a013fffae7..07af745220eb 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete(
* permitted. This state is entered from the INITIAL state. This state
* is entered from the STOPPING state.
*
- * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * @SCI_DEV_STARTING: This state indicates that the remote device is in
* the process of becoming ready (i.e. starting). In this state no new
* IO operations are permitted. This state is entered from the STOPPED
* state.
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
index c7ee81d01125..f22950b12b8b 100644
--- a/drivers/scsi/isci/remote_node_context.h
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state {
/**
* struct sci_remote_node_context - This structure contains the data
* associated with the remote node context object. The remote node context
- * (RNC) object models the the remote device information necessary to manage
+ * (RNC) object models the remote device information necessary to manage
* the silicon RNC.
*/
struct sci_remote_node_context {
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 5d6fda72d659..ba330e56bfe7 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -67,7 +67,7 @@
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
-* @ihost: host on which the the request was queued
+* @ihost: host on which the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 6eed9e76a166..20bdd0603108 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1680,7 +1680,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -1713,7 +1713,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -1846,7 +1846,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -1878,7 +1878,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 7a5d81a65be8..5a447c2c6522 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5813,7 +5813,7 @@ reject_out:
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful, the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 2a17e31265b8..fbad2c534691 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2012,7 +2012,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so that the round robin selection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
@@ -5727,7 +5727,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
}
/* This routine decrements the reference count for a ndlp structure. If the
- * count goes to 0, this indicates the the associated nodelist should be
+ * count goes to 0, this indicates that the associated nodelist should be
* freed. Returning 1 indicates the ndlp resource has been released; on the
* other hand, returning 0 indicates the ndlp resource has not been released
* yet.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index a5769a9960ac..ae2d01f7e67d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3903,7 +3903,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelevant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 1f292e29d566..d9a9ddbf1771 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2265,7 +2265,7 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * that the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 32ada0505576..a24a0b1e59d4 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -16748,7 +16748,7 @@ out:
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index dd12c6fe57a6..7508ee4810a8 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3212,7 +3212,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when HBA driver received the identify done event or initiate FIS received
* event(for SATA), it will invoke this function to notify the sas layer that
- * the sas toplogy has formed, please discover the the whole sas domain,
+ * the sas toplogy has formed, please discover the whole sas domain,
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 80b8408ac3e3..4cbdc43d509c 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -354,7 +354,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
{
/*
* On all 4xx PPC's the SPI bus is shared/multiplexed with
- * the 2nd I2C bus. We need to enable the the SPI bus before
+ * the 2nd I2C bus. We need to enable the SPI bus before
* using it.
*/
diff --git a/drivers/staging/android/ion/ion.c b/drivers/staging/android/ion/ion.c
index 270360912b2c..200ea0ccf7c4 100644
--- a/drivers/staging/android/ion/ion.c
+++ b/drivers/staging/android/ion/ion.c
@@ -901,7 +901,7 @@ void ion_pages_sync_for_device(struct device *dev, struct page *page,
sg_set_page(&sg, page, size, 0);
/*
* This is not correct - sg_dma_address needs a dma_addr_t that is valid
- * for the the targeted device, but this works on the currently targeted
+ * for the targeted device, but this works on the currently targeted
* hardware.
*/
sg_dma_address(&sg) = page_to_phys(page);
diff --git a/drivers/staging/android/uapi/binder.h b/drivers/staging/android/uapi/binder.h
index 904adb7600cf..1dd36442263e 100644
--- a/drivers/staging/android/uapi/binder.h
+++ b/drivers/staging/android/uapi/binder.h
@@ -265,7 +265,7 @@ enum binder_driver_return_protocol {
BR_FAILED_REPLY = _IO('r', 17),
/*
- * The the last transaction (either a bcTRANSACTION or
+ * The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
};
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 831b7c6fe494..3f1f28e2dce2 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -1234,7 +1234,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
/* Initialize the Space Available Register */
writel(0, &rxmac->space_avail);
- /* Initialize the the mif_ctrl register
+ /* Initialize the mif_ctrl register
* bit 3: Receive code error. One or more nibbles were signaled as
* errors during the reception of the packet. Clear this
* bit in Gigabit, set it in 100Mbit. This was derived
diff --git a/drivers/staging/lustre/lustre/llite/file.c b/drivers/staging/lustre/lustre/llite/file.c
index fd1b75a3a569..6c40b3665521 100644
--- a/drivers/staging/lustre/lustre/llite/file.c
+++ b/drivers/staging/lustre/lustre/llite/file.c
@@ -364,7 +364,7 @@ int ll_file_release(struct inode *inode, struct file *file)
fd = LUSTRE_FPRIVATE(file);
LASSERT(fd != NULL);
- /* The last ref on @file, maybe not the the owner pid of statahead.
+ /* The last ref on @file, maybe not the owner pid of statahead.
* Different processes can open the same dir, "ll_opendir_key" means:
* it is me that should stop the statahead thread. */
if (S_ISDIR(inode->i_mode) && lli->lli_opendir_key == fd &&
diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
index 5e4e49fab63c..815c5866cb4b 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
@@ -447,7 +447,7 @@ struct timeout_item* ptlrpc_new_timeout(int time, enum timeout_event event,
}
/**
- * Register timeout event on the the pinger thread.
+ * Register timeout event on the pinger thread.
* Note: the timeout list is an sorted list with increased timeout value.
*/
static struct timeout_item*
diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index 104b01fa0fad..803ddfb8d065 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -453,7 +453,7 @@ u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network *pnetwork)
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the connection. */
+ /* If the driver wants to use the bssid to create the connection. */
/* If not, we have to copy the connecting AP's MAC address to it so that */
/* the driver just has the bssid information for PMKIDList searching. */
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 73410ccfb1ec..ebefffd2e96a 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -920,7 +920,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
int i;
struct ieee80211_rxb *rxb = NULL;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.c b/drivers/staging/rtl8712/rtl871x_cmd.c
index d9c1561e3272..5aae4cce8477 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -527,7 +527,7 @@ u8 r8712_joinbss_cmd(struct _adapter *padapter, struct wlan_network *pnetwork)
memcpy(&psecuritypriv->authenticator_ie[1],
&psecnetwork->IEs[12], (256-1));
psecnetwork->IELength = 0;
- /* If the the driver wants to use the bssid to create the connection.
+ /* If the driver wants to use the bssid to create the connection.
* If not, we copy the connecting AP's MAC address to it so that
* the driver just has the bssid information for PMKIDList searching.
*/
diff --git a/drivers/staging/rtl8723au/core/rtw_cmd.c b/drivers/staging/rtl8723au/core/rtw_cmd.c
index 7241a5a8731c..611cd1f6c555 100644
--- a/drivers/staging/rtl8723au/core/rtw_cmd.c
+++ b/drivers/staging/rtl8723au/core/rtw_cmd.c
@@ -518,7 +518,7 @@ int rtw_joinbss_cmd23a(struct rtw_adapter *padapter,
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the
+ /* If the driver wants to use the bssid to create the
* connection. If not, we have to copy the connecting AP's
* MAC address to it so that the driver just has the bssid
* information for PMKIDList searching. */
diff --git a/drivers/staging/unisys/common-spar/include/channels/iochannel.h b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
index 24e11858e0ee..0fce4fd54ce9 100644
--- a/drivers/staging/unisys/common-spar/include/channels/iochannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
@@ -595,7 +595,7 @@ struct uiscmdrsp_scsitaskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
@@ -642,7 +642,7 @@ struct uiscmdrsp_vdiskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
diff --git a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
index 8facb51143ae..9dc629f36cc1 100644
--- a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
@@ -68,11 +68,11 @@ typedef struct _ULTRA_VBUS_HEADERINFO {
u32 devInfoCount; /* num of items in DevInfo member */
/* (this is the allocated size) */
u32 chpInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the ChpInfo struct (below) */
+ /* to the ChpInfo struct (below) */
u32 busInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the BusInfo struct (below) */
+ /* to the BusInfo struct (below) */
u32 devInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the DevInfo array (below) */
+ /* to the DevInfo array (below) */
u8 reserved[104];
} ULTRA_VBUS_HEADERINFO;
diff --git a/drivers/staging/unisys/virtpci/virtpci.c b/drivers/staging/unisys/virtpci/virtpci.c
index d9443a968ddf..97f3d823c688 100644
--- a/drivers/staging/unisys/virtpci/virtpci.c
+++ b/drivers/staging/unisys/virtpci/virtpci.c
@@ -745,7 +745,7 @@ static int virtpci_device_resume(struct device *dev)
/* For a child device just created on a client bus, fill in
* information about the driver that is controlling this device into
- * the the appropriate slot within the vbus channel of the bus
+ * the appropriate slot within the vbus channel of the bus
* instance.
*/
static void fix_vbus_devInfo(struct device *dev, int devNo, int devType,
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index fbc5ebb5f761..c0664ec01fc2 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -411,7 +411,7 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
} else {
/*
* Extract the RELATIVE TARGET PORT IDENTIFIER to identify
- * the Target Port in question for the the incoming
+ * the Target Port in question for the incoming
* SET_TARGET_PORT_GROUPS op.
*/
rtpi = get_unaligned_be16(ptr + 2);
diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h
index ba87d6e731dd..1a4ba247f160 100644
--- a/drivers/thunderbolt/ctl.h
+++ b/drivers/thunderbolt/ctl.h
@@ -44,7 +44,7 @@ struct tb_cfg_result {
* If err = 1 then this is the port that send the
* error.
* If err = 0 and if this was a cfg_read/write then
- * this is the the upstream port of the responding
+ * this is the upstream port of the responding
* switch.
* Otherwise the field is set to zero.
*/
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 6234c75da33f..50294f31f227 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -313,8 +313,7 @@ static const int hrsl_to_error[] = {
/*
* See http://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a
- * reasonable overview of how control transfers use the the IN/OUT
- * tokens.
+ * reasonable overview of how control transfers use the IN/OUT tokens.
*/
#define MAX3421_HXFR_BULK_IN(ep) (0x00 | (ep)) /* bulk or interrupt */
#define MAX3421_HXFR_SETUP 0x10
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index abed30b82905..54674c03d22b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1652,7 +1652,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
- * RExit to a disconnect state). If so, let the the driver know it's
+ * RExit to a disconnect state). If so, let the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED(temp) &&
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 01bf53392819..1b99a08ca2de 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -261,7 +261,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
* Cypress app note that describes this mechanism
- * states the the low-speed part can't handle more
+ * states that the low-speed part can't handle more
* than 800 bytes/sec, in which case 4800 baud is the
* safest speed for a part like that.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index dfd728a263d2..71636a617d89 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -429,7 +429,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
}
/*
- * This is the the common top part of all parallel port callback operations that
+ * This is the common top part of all parallel port callback operations that
* send synchronous messages to the device. This implements convoluted locking
* that avoids two scenarios: (1) a port operation is called after usbserial
* has called our release function, at which point struct mos7715_parport has
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 0677139c6065..d435940d5598 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -46,7 +46,7 @@
*
* ASSUMPTIONS:
*
- * - We use the the as device address the port number where it is
+ * - We use as device address the port number where it is
* connected (port 0 doesn't exist). For unauth, it is 128 + that.
*
* ROADMAP:
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
index b7d4f6b75eef..caa4cb40334d 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/uwb/drp-ie.c
@@ -262,7 +262,7 @@ int uwb_drp_ie_update(struct uwb_rsv *rsv)
* We are given a zone id and the MAS bitmap of bits that need to be set in
* this zone. Note that this zone may already have bits set and this only
* adds settings - we cannot simply assign the MAS bitmap contents to the
- * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * zone contents. We iterate over the bits (MAS) in the zone and set the
* bits that are set in the given MAS bitmap.
*/
static
diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
index d4e7684e7045..501bc08dc125 100644
--- a/drivers/video/fbdev/omap/sossi.c
+++ b/drivers/video/fbdev/omap/sossi.c
@@ -370,7 +370,7 @@ static void sossi_set_bits_per_cycle(int bpc)
int bus_pick_count, bus_pick_width;
/*
- * We set explicitly the the bus_pick_count as well, although
+ * We set explicitly the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
diff --git a/drivers/video/fbdev/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c
index ceb434c95c0d..9177b8056356 100644
--- a/drivers/video/fbdev/sis/sis_accel.c
+++ b/drivers/video/fbdev/sis/sis_accel.c
@@ -215,7 +215,7 @@ SiS310SubsequentScreenToScreenCopy(struct sis_video_info *ivideo, int src_x, int
* and destination blitting areas overlap and
* adapt the bitmap addresses synchronously
* if the coordinates exceed the valid range.
- * The the areas do not overlap, we do our
+ * If the areas do not overlap, we do our
* normal check.
*/
if((mymax - mymin) < height) {
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 5b570b6efa28..ecbd6b7b6c9a 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -507,7 +507,7 @@ static int autofs_dev_ioctl_askumount(struct file *fp,
* located path is the root of a mount we return 1 along with
* the super magic of the mount or 0 otherwise.
*
- * In both cases the the device number (as returned by
+ * In both cases the device number (as returned by
* new_encode_dev()) is also returned.
*/
static int autofs_dev_ioctl_ismountpoint(struct file *fp,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index eea26e1b2fda..8ae32564e6d7 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -849,7 +849,7 @@ int btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace)
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
- * not called and the the filesystem is remounted
+ * not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancelation is wanted.
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index 6528aa662181..6c5ce8e50f32 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -3402,7 +3402,7 @@ verbose_printk("btrfs: process_recorded_refs %llu\n", sctx->cur_ino);
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
- * the the current inum. To handle this case, we create the
+ * than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 1d1ba083ca6e..3d5b414003b3 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2654,7 +2654,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
mutex_unlock(&log_root_tree->log_mutex);
/*
- * nobody else is going to jump in and write the the ctree
+ * nobody else is going to jump in and write the ctree
* super here because the log_commit atomic below is protecting
* us. We must be called with a transaction handle pinning
* the running transaction open, so a full commit can't hop
diff --git a/fs/dcache.c b/fs/dcache.c
index cb25a1a5e307..4a327e47b6b0 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1885,8 +1885,8 @@ EXPORT_SYMBOL(d_obtain_root);
* same inode, only the actual correct case is stored in the dcache for
* case-insensitive filesystems.
*
- * For a case-insensitive lookup match and if the the case-exact dentry
- * already exists in in the dcache, use it and return it.
+ * For a case-insensitive lookup match and if the case-exact dentry
+ * already exists in the dcache, use it and return it.
*
* If no entry exists with the exact case name, allocate new dentry with
* the exact case, and return the spliced entry.
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 4725a07f003c..bcdfbc7568d7 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -900,7 +900,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack {
* @filename: This function kmalloc's the memory for the filename
* @filename_size: This function sets this to the amount of memory
* kmalloc'd for the filename
- * @packet_size: This function sets this to the the number of octets
+ * @packet_size: This function sets this to the number of octets
* in the packet parsed
* @mount_crypt_stat: The mount-wide cryptographic context
* @data: The memory location containing the start of the tag 70
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index d9a17d0b124d..c9c6f2e5a0a0 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -51,7 +51,7 @@ struct ext2_block_alloc_info {
/*
* Was i_next_alloc_goal in ext2_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it is the physical block number of the block which was most-recently
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index bea662bd0ca6..3b94971b7b9b 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -271,7 +271,7 @@ static int ext4_create_inline_data(handle_t *handle,
len = 0;
}
- /* Insert the the xttr entry. */
+ /* Insert the xttr entry. */
i.value = value;
i.value_len = len;
@@ -829,7 +829,7 @@ out:
/*
* Prepare the write for the inline data.
- * If the the data can be written into the inode, we just read
+ * If the data can be written into the inode, we just read
* the page and make it uptodate, and start the journal.
* Otherwise read the page, makes it dirty so that it can be
* handle in writepages(the i_disksize update is left to the
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index ff483257283b..5b3f3135fb0a 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -150,7 +150,7 @@ struct seg_entry {
unsigned short valid_blocks; /* # of valid blocks */
unsigned char *cur_valid_map; /* validity bitmap of blocks */
/*
- * # of valid blocks and the validity bitmap stored in the the last
+ * # of valid blocks and the validity bitmap stored in the last
* checkpoint pack. This information is used by the SSR mode.
*/
unsigned short ckpt_valid_blocks;
diff --git a/fs/kernfs/file.c b/fs/kernfs/file.c
index 4429d6d9217f..2d4e4ef09b73 100644
--- a/fs/kernfs/file.c
+++ b/fs/kernfs/file.c
@@ -259,7 +259,7 @@ static ssize_t kernfs_fop_read(struct file *file, char __user *user_buf,
* There is no easy way for us to know if userspace is only doing a partial
* write, so we don't support them. We expect the entire buffer to come on
* the first write. Hint: if you're writing a value, first read the file,
- * modify only the the value you're changing, then write entire buffer
+ * modify only the value you're changing, then write entire buffer
* back.
*/
static ssize_t kernfs_fop_write(struct file *file, const char __user *user_buf,
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 044013455621..c0aa12bdb106 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -690,7 +690,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb,
/*
* Under certain conditions, the window slide code
* might have reduced the number of bits available or
- * disabled the the local alloc entirely. Re-check
+ * disabled the local alloc entirely. Re-check
* here and return -ENOSPC if necessary.
*/
status = -ENOSPC;
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index 5a6bd5d8779a..85438d16e633 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -71,7 +71,7 @@ xfs_fs_encode_fh(
fileid_type = FILEID_INO32_GEN_PARENT;
/*
- * If the the filesystem may contain 64bit inode numbers, we need
+ * If the filesystem may contain 64bit inode numbers, we need
* to use larger file handles that can represent them.
*
* While we only allocate inodes that do not fit into 32 bits any
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index 26bb55e9e8b6..37cdb83e1e24 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -120,7 +120,7 @@ static inline int drm_rect_height(const struct drm_rect *r)
}
/**
- * drm_rect_visible - determine if the the rectangle is visible
+ * drm_rect_visible - determine if the rectangle is visible
* @r: rectangle whose visibility is returned
*
* RETURNS:
diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h
index d5b5f76d57ef..91c32b80c6d1 100644
--- a/include/linux/mic_bus.h
+++ b/include/linux/mic_bus.h
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ include/linux/virtio.h.
*/
#ifndef _MIC_BUS_H_
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 8981cc882ed2..0b3da6784a66 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -196,7 +196,7 @@ extern pgprot_t protection_map[16];
#define FAULT_FLAG_USER 0x80 /* The fault originated in userspace */
/*
- * vm_fault is filled by the the pagefault handler and passed to the vma's
+ * vm_fault is filled by the pagefault handler and passed to the vma's
* ->fault function. The vma's ->fault is responsible for returning a bitmask
* of VM_FAULT_xxx flags that give details about how the fault was handled.
*
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 494f99e852da..f9f20ca81f51 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -94,7 +94,7 @@ struct kparam_array
* ".") the kernel commandline parameter. Note that - is changed to _, so
* the user can use "foo-bar=1" even for variable "foo_bar".
*
- * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * @perm is 0 if the variable is not to appear in sysfs, or 0444
* for world-readable, 0644 for root-writable, etc. Note that if it
* is writable, you may need to use kparam_block_sysfs_write() around
* accesses (esp. charp, which can be kfreed when it changes).
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index abde271c18ae..51301dc8c0c5 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2697,7 +2697,7 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
* must call this function to return the skb back to the stack, with
* or without a timestamp.
*
- * @skb: clone of the the original outgoing packet
+ * @skb: clone of the original outgoing packet
* @hwtstamps: hardware time stamps, may be NULL if not available
*
*/
diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h
index 94e5ed64dc6d..e9a8d524ab06 100644
--- a/include/net/caif/caif_layer.h
+++ b/include/net/caif/caif_layer.h
@@ -184,7 +184,7 @@ struct cflayer {
* CAIF packet downwards in the stack.
* Packet handling rules:
* - The CAIF packet (cfpkt) ownership is passed to the
- * transmit function. This means that the the packet
+ * transmit function. This means that the packet
* cannot be accessed after passing it to the below
* layer using dn->transmit().
*
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 9bcb220bd4ad..f422729b30c3 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -100,7 +100,7 @@ struct rt6_info {
struct in6_addr rt6i_gateway;
/* Multipath routes:
- * siblings is a list of rt6_info that have the the same metric/weight,
+ * siblings is a list of rt6_info that have the same metric/weight,
* destination, but not the same gateway. nsiblings is just a cache
* to speed up lookup.
*/
diff --git a/include/net/wimax.h b/include/net/wimax.h
index c52b68577cb0..c9705a3eb3b7 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -43,7 +43,7 @@
*
* USAGE
*
- * Embed a `struct wimax_dev` at the beginning of the the device's
+ * Embed a `struct wimax_dev` at the beginning of the device's
* private structure, initialize and register it. For details, see
* `struct wimax_dev`s documentation.
*
diff --git a/include/uapi/asm-generic/fcntl.h b/include/uapi/asm-generic/fcntl.h
index 7543b3e51331..3c8f396825b8 100644
--- a/include/uapi/asm-generic/fcntl.h
+++ b/include/uapi/asm-generic/fcntl.h
@@ -142,7 +142,7 @@
* record locks, but are "owned" by the open file description, not the
* process. This means that they are inherited across fork() like BSD (flock)
* locks, and they are only released automatically when the last reference to
- * the the open file against which they were acquired is put.
+ * the open file against which they were acquired is put.
*/
#define F_OFD_GETLK 36
#define F_OFD_SETLK 37
diff --git a/init/Kconfig b/init/Kconfig
index e84c6423a2e5..19e94edc0ac8 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -848,8 +848,8 @@ config LOG_CPU_MAX_BUF_SHIFT
used as it forces an exact (power of two) size of the ring buffer.
The number of possible CPUs is used for this computation ignoring
- hotplugging making the compuation optimal for the the worst case
- scenerio while allowing a simple algorithm to be used from bootup.
+ hotplugging making the computation optimal for the worst case
+ scenario while allowing a simple algorithm to be used from bootup.
Examples shift values and their meaning:
17 => 128 KB for each CPU
diff --git a/init/main.c b/init/main.c
index bb1aed928f21..ceb26e85e416 100644
--- a/init/main.c
+++ b/init/main.c
@@ -512,7 +512,7 @@ asmlinkage __visible void __init start_kernel(void)
debug_objects_early_init();
/*
- * Set up the the initial canary ASAP:
+ * Set up the initial canary ASAP:
*/
boot_init_stack_canary();
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 9019f15deab2..6e82ca9e2735 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -17,7 +17,7 @@
#ifdef HAVE_JUMP_LABEL
-/* mutex to protect coming/going of the the jump_label table */
+/* mutex to protect coming/going of the jump_label table */
static DEFINE_MUTEX(jump_label_mutex);
void jump_label_lock(void)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 1ce770687ea8..8cd9ce2a6bcc 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2878,7 +2878,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
- * with as many of the the *youngest* kmsg records that fit into it.
+ * with as many of the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
diff --git a/kernel/smp.c b/kernel/smp.c
index aff8aa14f547..c6174667d632 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -622,7 +622,7 @@ EXPORT_SYMBOL(on_each_cpu_mask);
* for all the required CPUs to finish. This may include the local
* processor.
* @cond_func: A callback function that is passed a cpu id and
- * the the info parameter. The function is called
+ * the info parameter. The function is called
* with preemption disabled. The function should
* return a blooean value indicating whether to IPI
* the specified CPU.
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index b38fb2b9e237..612b68cd4599 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2881,7 +2881,7 @@ rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
* This function lets the user discard an event in the ring buffer
* and then that event will not be read later.
*
- * This function only works if it is called before the the item has been
+ * This function only works if it is called before the item has been
* committed. It will try to free the event from the ring buffer
* if another event has not been added behind it.
*
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 1e031f2c9aba..6a76a7f29c3f 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -884,7 +884,7 @@ EXPORT_SYMBOL(bitmap_bitremap);
* read it, you're overqualified for your current job.)
*
* In other words, @orig is mapped onto (surjectively) @dst,
- * using the the map { <n, m> | the n-th bit of @relmap is the
+ * using the map { <n, m> | the n-th bit of @relmap is the
* m-th set bit of @relmap }.
*
* Any set bits in @orig above bit number W, where W is the
diff --git a/lib/dynamic_queue_limits.c b/lib/dynamic_queue_limits.c
index 0777c5a45fa0..2ad6fc394f07 100644
--- a/lib/dynamic_queue_limits.c
+++ b/lib/dynamic_queue_limits.c
@@ -60,7 +60,7 @@ void dql_completed(struct dql *dql, unsigned int count)
* the whole interval (the check above).
*
* If there is slack, the amount of execess data queued above
- * the the amount needed to prevent starvation, the queue limit
+ * the amount needed to prevent starvation, the queue limit
* can be decreased. To avoid hysteresis we consider the
* minimum amount of slack found over several iterations of the
* completion routine.
diff --git a/lib/earlycpio.c b/lib/earlycpio.c
index 3eb3e4722b8e..9d4da0a6a6ed 100644
--- a/lib/earlycpio.c
+++ b/lib/earlycpio.c
@@ -50,7 +50,7 @@ enum cpio_fields {
/**
* cpio_data find_cpio_data - Search for files in an uncompressed cpio
* @path: The directory to search for, including a slash at the end
- * @data: Pointer to the the cpio archive or a header inside
+ * @data: Pointer to the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @nextoff: When a matching file is found, this is the offset from the
* beginning of the cpio to the beginning of the next file, not the
diff --git a/lib/syscall.c b/lib/syscall.c
index e30e03932480..624d80430969 100644
--- a/lib/syscall.c
+++ b/lib/syscall.c
@@ -31,7 +31,7 @@ static int collect_syscall(struct task_struct *target, long *callno,
* @pc: filled with user PC
*
* If @target is blocked in a system call, returns zero with *@callno
- * set to the the call's number and @args filled in with its arguments.
+ * set to the call's number and @args filled in with its arguments.
* Registers not used for system call arguments may not be available and
* it is not kosher to use &struct user_regset calls while the system
* call is still in progress. Note we may get this result if @target
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index eeceeeb09019..fdd76586e1a4 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1308,7 +1308,7 @@ static void return_unused_surplus_pages(struct hstate *h,
* evenly across all nodes with memory. Iterate across these nodes
* until we can no longer free unreserved surplus pages. This occurs
* when the nodes with surplus pages have no free pages.
- * free_pool_huge_page() will balance the the freed pages across the
+ * free_pool_huge_page() will balance the freed pages across the
* on-line nodes with memory and will handle the hstate accounting.
*/
while (nr_pages--) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 18cee0d4c8a2..c9c9b33608f3 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4222,7 +4222,7 @@ static int zone_batchsize(struct zone *zone)
* locking.
*
* Any new users of pcp->batch and pcp->high should ensure they can cope with
- * those fields changing asynchronously (acording the the above rule).
+ * those fields changing asynchronously (according to the above rule).
*
* mutex_is_locked(&pcp_batch_high_lock) required when calling this function
* outside of boot time (or some other assurance that no concurrent updaters
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index faff6247ac8f..9f4c71ba8dd1 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -966,7 +966,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
return 0;
}
-/* Encrypt the the link */
+/* Encrypt the link */
static void hci_conn_encrypt(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 1d9c29a00568..5b2b17522561 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1674,7 +1674,7 @@ static void hci_init3_req(struct hci_request *req, unsigned long opt)
* Delete Stored Link Key command. They are clearly indicating its
* absence in the bit mask of supported commands.
*
- * Check the supported commands and only if the the command is marked
+ * Check the supported commands and only if the command is marked
* as supported send it. If not supported assume that the controller
* does not have actual support for stored link keys which makes this
* command redundant anyway.
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index a88b8524846e..9d83a2e05baf 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1349,7 +1349,7 @@ static void sctp_select_active_and_retran_path(struct sctp_association *asoc)
}
/* We did not find anything useful for a possible retransmission
- * path; either primary path that we found is the the same as
+ * path; either primary path that we found is the same as
* the current one, or we didn't generally find an active one.
*/
if (trans_sec == NULL)
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index 158701da2d31..f0424e16beb7 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -199,7 +199,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3;
max = asoc->frag_point;
- /* If the the peer requested that we authenticate DATA chunks
+ /* If the peer requested that we authenticate DATA chunks
* we need to account for bundling of the AUTH chunks along with
* DATA.
*/
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 6f6b829c9e8e..1ef370a9f675 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -190,7 +190,7 @@ void rpc_destroy_generic_auth(void)
}
/*
- * Test the the current time (now) against the underlying credential key expiry
+ * Test the current time (now) against the underlying credential key expiry
* minus a timeout and setup notification.
*
* The normal case:
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 403078d670a9..b21863009913 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
* @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
* %WIMAX_RF_OFF radio off.
*
- * Reports changes in the software RF switch state to the the WiMAX
+ * Reports changes in the software RF switch state to the WiMAX
* stack.
*
* The main use is during initialization, so the driver can query the
diff --git a/scripts/coccinelle/misc/badty.cocci b/scripts/coccinelle/misc/badty.cocci
index 2fc06fc71927..7bde383f577b 100644
--- a/scripts/coccinelle/misc/badty.cocci
+++ b/scripts/coccinelle/misc/badty.cocci
@@ -3,7 +3,7 @@
//# This makes an effort to find cases where the argument to sizeof is wrong
//# in memory allocation functions by checking the type of the allocated memory
//# when it is a double pointer and ensuring the sizeof argument takes a pointer
-//# to the the memory being allocated. There are false positives in cases the
+//# to the memory being allocated. There are false positives in cases the
//# sizeof argument is not used in constructing the return value. The result
//# may need some reformatting.
//
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index db40fa04cd51..9eb8c74b69a1 100644
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in
kernel/trace/trace_functions.c
The resulted trace is processed into a tree to produce a more human
view of the call stack by drawing textual but hierarchical tree of
-calls. Only the functions's names and the the call time are provided.
+calls. Only the functions's names and the call time are provided.
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
index 3064c6ced87c..7b9769e7985a 100644
--- a/security/apparmor/context.c
+++ b/security/apparmor/context.c
@@ -13,7 +13,7 @@
* License.
*
*
- * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * AppArmor sets confinement on every task, via the aa_task_cxt and
* the aa_task_cxt.profile, both of which are required and are not allowed
* to be NULL. The aa_task_cxt is not reference counted and is unique
* to each cred (which is reference count). The profile pointed to by
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index e26f860e5f2e..112d40974504 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -474,7 +474,7 @@ error:
* keyring, otherwise replace the link to the matching key with a link to the
* new key.
*
- * The key must grant the caller Link permission and the the keyring must grant
+ * The key must grant the caller Link permission and the keyring must grant
* the caller Write permission. Furthermore, if an additional link is created,
* the keyring's quota will be extended.
*
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index ec6a7d0d1886..e3ecc7538f8e 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -5110,7 +5110,7 @@ EXPORT_SYMBOL_GPL(snd_hda_power_save);
* @nid: NID to check / update
*
* Check whether the given NID is in the amp list. If it's in the list,
- * check the current AMP status, and update the the power-status according
+ * check the current AMP status, and update the power-status according
* to the mute status.
*
* This function is supposed to be set or called from the check_power_status
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 98cd1908c039..f193b73de0f2 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -887,7 +887,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec,
static struct snd_kcontrol_new beep_vol_ctl =
HDA_CODEC_VOLUME(NULL, 0, 0, 0);
- /* check for mute support for the the amp */
+ /* check for mute support for the amp */
if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
const struct snd_kcontrol_new *temp;
if (spec->anabeep_nid == nid)
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index f3b491aa3e22..df5cb3b4b6e2 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -31,7 +31,7 @@
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
- * sampling rate. That means the the FPGA doubles the
+ * sampling rate. That means that the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index bddee30a4bc7..eaac777ee91d 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -694,7 +694,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int source)
u64 Kpart;
unsigned int K, Ndiv, Nmod, target;
- /* The the PLL output is always 98.304MHz. */
+ /* The PLL output is always 98.304MHz. */
target = 98304000;
/* If the input frequency is over 14.4MHz then scale it down. */
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index a609aafc994d..3c1c7b71e69b 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -164,7 +164,7 @@ static void fsl_dma_abort_stream(struct snd_pcm_substream *substream)
/**
* fsl_dma_update_pointers - update LD pointers to point to the next period
*
- * As each period is completed, this function changes the the link
+ * As each period is completed, this function changes the link
* descriptor pointers for that period to point to the next period.
*/
static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private)
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index b2c3d0d5dca3..8dc8cc9b8348 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -615,7 +615,7 @@ A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. The DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index b3b8abae62b8..6acad619044b 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -196,7 +196,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
- period being the hist entry period value
- - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option
+ - WEIGHT-A/WEIGHT-B being user suplied weights in the '-c' option
behind ':' separator like '-c wdiff:1,2'.
- WIEGHT-A being the weight of the data file
- WIEGHT-B being the weight of the baseline data file
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index 56bfb523c5bb..6940d8849434 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -35,9 +35,9 @@ The \fB-c MSR#\fP option includes the delta of the specified 32-bit MSR counter.
.PP
The \fB-C MSR#\fP option includes the delta of the specified 64-bit MSR counter.
.PP
-The \fB-m MSR#\fP option includes the the specified 32-bit MSR value.
+The \fB-m MSR#\fP option includes the specified 32-bit MSR value.
.PP
-The \fB-M MSR#\fP option includes the the specified 64-bit MSR value.
+The \fB-M MSR#\fP option includes the specified 64-bit MSR value.
.PP
The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
The default is 5 seconds.
diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
index fd7e9e9d6f4a..1aa7faa0e0e0 100644
--- a/tools/thermal/tmon/pid.c
+++ b/tools/thermal/tmon/pid.c
@@ -38,7 +38,7 @@
/**************************************************************************
* PID (Proportional-Integral-Derivative) controller is commonly used in
- * linear control system, consider the the process.
+ * linear control system, consider the process.
* G(s) = U(s)/E(s)
* kp = proportional gain
* ki = integral gain
--
1.9.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-02 20:11 ` Michael Opdenacker
@ 2014-10-02 20:13 ` Michael Opdenacker
2014-10-02 20:15 ` Michael Opdenacker
0 siblings, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2014-10-02 20:13 UTC (permalink / raw)
To: rdunlap, trivial, joe, akpm, arend, gregkh; +Cc: linux-kernel
On 10/02/2014 10:11 PM, Michael Opdenacker wrote:
....
Oops, bad version of the patch. Resending... Time to get a little sleep :}
--
Michael Opdenacker, CEO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
+33 484 258 098
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-02 20:13 ` Michael Opdenacker
@ 2014-10-02 20:15 ` Michael Opdenacker
2014-10-02 22:37 ` Eduardo Valentin
0 siblings, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2014-10-02 20:15 UTC (permalink / raw)
To: rdunlap, trivial, joe, akpm, arend, gregkh
Cc: linux-kernel, Michael Opdenacker
Fix all occurrences of "the the ", and occasionally "in in ",
in the source code, comments and documentation.
The replacement couldn't be automated because sometimes
the first "the" was meant to be another word.
Example: "according the the"
meaning: "according to the"
Note that I sometimes took the opportunity to fix
other spelling issues or typos in the same sentences,
and to reformat some comments impacted by the changes.
I also fixed a few checkpatch errors in the same
lines, but not all of them (should be addressed by
separate patches).
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Reviewed-by: rdunlap@infradead.org
---
Documentation/ABI/testing/sysfs-devices-memory | 2 +-
Documentation/DocBook/media/v4l/controls.xml | 2 +-
Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
Documentation/devicetree/bindings/arm/msm/timer.txt | 2 +-
.../devicetree/bindings/ata/cavium-compact-flash.txt | 2 +-
Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt | 2 +-
Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt | 2 +-
Documentation/devicetree/bindings/mtd/fsmc-nand.txt | 2 +-
.../devicetree/bindings/net/broadcom-systemport.txt | 2 +-
Documentation/filesystems/autofs4-mount-control.txt | 4 ++--
Documentation/phy.txt | 2 +-
Documentation/vm/unevictable-lru.txt | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/unwind.h | 2 +-
arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
arch/arm/mach-pxa/stargate2.c | 2 +-
arch/arm64/crypto/aes-neon.S | 2 +-
arch/blackfin/mach-common/entry.S | 2 +-
arch/c6x/platforms/cache.c | 2 +-
arch/ia64/include/asm/spinlock.h | 2 +-
arch/ia64/include/asm/uv/uv_hub.h | 2 +-
arch/m68k/platform/coldfire/intc-2.c | 2 +-
arch/metag/kernel/process.c | 2 +-
arch/microblaze/kernel/entry.S | 2 +-
arch/mips/alchemy/devboards/pm.c | 2 +-
arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
arch/mips/include/asm/spinlock.h | 2 +-
arch/mips/kvm/mips.c | 2 +-
arch/mips/mm/c-octeon.c | 4 ++--
arch/mips/netlogic/xlr/fmn.c | 2 +-
arch/powerpc/include/asm/cache.h | 2 +-
arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
arch/powerpc/kernel/head_64.S | 2 +-
arch/powerpc/mm/gup.c | 2 +-
arch/powerpc/mm/hugetlbpage.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/platforms/chrp/setup.c | 2 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
arch/s390/kernel/perf_cpum_sf.c | 2 +-
arch/s390/mm/gup.c | 2 +-
arch/sparc/kernel/pci.c | 2 +-
arch/sparc/mm/gup.c | 2 +-
arch/tile/include/asm/irqflags.h | 2 +-
arch/tile/include/gxio/trio.h | 2 +-
arch/tile/kernel/single_step.c | 2 +-
arch/x86/include/asm/spinlock.h | 2 +-
arch/x86/include/asm/uv/uv_hub.h | 2 +-
arch/x86/kvm/x86.c | 2 +-
arch/x86/mm/gup.c | 4 ++--
arch/x86/xen/setup.c | 2 +-
arch/xtensa/include/asm/initialize_mmu.h | 2 +-
arch/xtensa/kernel/entry.S | 12 ++++++------
crypto/asymmetric_keys/pkcs7_parser.h | 2 +-
drivers/acpi/acpica/accommon.h | 2 +-
drivers/acpi/acpica/tbfadt.c | 2 +-
drivers/char/apm-emulation.c | 2 +-
drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
drivers/cpuidle/driver.c | 2 +-
drivers/crypto/picoxcell_crypto.c | 2 +-
drivers/crypto/ux500/hash/hash_core.c | 2 +-
drivers/gpio/gpio-ich.c | 2 +-
drivers/gpio/gpio-sch.c | 4 ++--
drivers/gpu/drm/drm_mm.c | 4 ++--
drivers/gpu/drm/i915/i915_gem.c | 2 +-
drivers/gpu/drm/i915/i915_gem_userptr.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 4 ++--
drivers/gpu/drm/radeon/atombios.h | 4 ++--
drivers/gpu/drm/radeon/r300_reg.h | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 2 +-
drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
drivers/gpu/drm/radeon/radeon_vm.c | 4 ++--
drivers/hv/channel.c | 4 ++--
drivers/hv/vmbus_drv.c | 4 ++--
drivers/hwmon/pmbus/ucd9200.c | 2 +-
drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
drivers/infiniband/hw/qib/qib.h | 2 +-
drivers/input/mouse/gpio_mouse.c | 2 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
drivers/lguest/core.c | 2 +-
drivers/media/dvb-frontends/tda1002x.h | 2 +-
drivers/media/dvb-frontends/tda10048.c | 2 +-
drivers/media/pci/cx88/cx88-dsp.c | 2 +-
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/saa7164/saa7164-core.c | 2 +-
drivers/media/platform/davinci/vpbe.c | 2 +-
drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
drivers/media/usb/dvb-usb/friio.c | 2 +-
drivers/media/usb/dvb-usb/friio.h | 2 +-
drivers/media/usb/gspca/finepix.c | 2 +-
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 2 +-
drivers/memory/emif.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/mfd/db8500-prcmu.c | 2 +-
drivers/misc/mic/bus/mic_bus.c | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/ubi/ubi.h | 4 ++--
drivers/mtd/ubi/wl.c | 2 +-
drivers/net/can/xilinx_can.c | 2 +-
drivers/net/ethernet/calxeda/xgmac.c | 2 +-
drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
drivers/net/wimax/i2400m/i2400m.h | 4 ++--
drivers/net/wimax/i2400m/rx.c | 2 +-
drivers/net/wimax/i2400m/tx.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/wcn36xx/hal.h | 8 ++++----
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++--
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 ++--
drivers/net/wireless/mwifiex/debugfs.c | 2 +-
drivers/net/wireless/rsi/rsi_91x_sdio.c | 4 ++--
drivers/net/wireless/ti/wl1251/acx.h | 2 +-
drivers/of/base.c | 2 +-
drivers/pci/hotplug/acpiphp_glue.c | 2 +-
drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 2 +-
drivers/pinctrl/pinctrl-at91.c | 2 +-
drivers/power/power_supply_sysfs.c | 5 +++--
drivers/rtc/rtc-rs5c372.c | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 6 +++---
drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++--
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/remote_device.h | 2 +-
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/spi/spi-ppc4xx.c | 2 +-
drivers/staging/android/ion/ion.c | 2 +-
drivers/staging/android/uapi/binder.h | 2 +-
drivers/staging/et131x/et131x.c | 2 +-
drivers/staging/lustre/lustre/llite/file.c | 2 +-
drivers/staging/lustre/lustre/ptlrpc/pinger.c | 2 +-
drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/rtl8712/rtl871x_cmd.c | 2 +-
drivers/staging/rtl8723au/core/rtw_cmd.c | 2 +-
.../staging/unisys/common-spar/include/channels/iochannel.h | 4 ++--
.../unisys/common-spar/include/channels/vbuschannel.h | 6 +++---
drivers/staging/unisys/virtpci/virtpci.c | 2 +-
drivers/target/target_core_alua.c | 2 +-
drivers/thunderbolt/ctl.h | 2 +-
drivers/usb/host/max3421-hcd.c | 3 +--
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/mos7720.c | 2 +-
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/uwb/drp-ie.c | 2 +-
drivers/video/fbdev/omap/sossi.c | 2 +-
drivers/video/fbdev/sis/sis_accel.c | 2 +-
fs/autofs4/dev-ioctl.c | 2 +-
fs/btrfs/dev-replace.c | 2 +-
fs/btrfs/send.c | 2 +-
fs/btrfs/tree-log.c | 2 +-
fs/dcache.c | 4 ++--
fs/ecryptfs/keystore.c | 2 +-
fs/ext2/ext2.h | 2 +-
fs/ext4/inline.c | 4 ++--
fs/f2fs/segment.h | 2 +-
fs/kernfs/file.c | 2 +-
fs/ocfs2/localalloc.c | 2 +-
fs/xfs/xfs_export.c | 2 +-
include/drm/drm_rect.h | 2 +-
include/linux/mic_bus.h | 2 +-
include/linux/mm.h | 2 +-
include/linux/moduleparam.h | 2 +-
include/linux/skbuff.h | 2 +-
include/net/caif/caif_layer.h | 2 +-
include/net/ip6_fib.h | 2 +-
include/net/wimax.h | 2 +-
include/uapi/asm-generic/fcntl.h | 2 +-
init/Kconfig | 4 ++--
init/main.c | 2 +-
kernel/jump_label.c | 2 +-
kernel/printk/printk.c | 2 +-
kernel/smp.c | 2 +-
kernel/trace/ring_buffer.c | 2 +-
lib/bitmap.c | 2 +-
lib/dynamic_queue_limits.c | 2 +-
lib/earlycpio.c | 2 +-
lib/syscall.c | 2 +-
mm/hugetlb.c | 2 +-
mm/page_alloc.c | 2 +-
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/hci_core.c | 2 +-
net/sctp/associola.c | 2 +-
net/sctp/chunk.c | 2 +-
net/sunrpc/auth_generic.c | 2 +-
net/wimax/op-rfkill.c | 2 +-
scripts/coccinelle/misc/badty.cocci | 2 +-
scripts/tracing/draw_functrace.py | 2 +-
security/apparmor/context.c | 2 +-
security/keys/keyctl.c | 2 +-
sound/pci/hda/hda_codec.c | 2 +-
sound/pci/hda/patch_sigmatel.c | 2 +-
sound/pci/ice1712/prodigy192.c | 2 +-
sound/soc/codecs/wm9713.c | 2 +-
sound/soc/fsl/fsl_dma.c | 2 +-
sound/sparc/dbri.c | 2 +-
tools/perf/Documentation/perf-diff.txt | 2 +-
tools/power/x86/turbostat/turbostat.8 | 4 ++--
tools/thermal/tmon/pid.c | 2 +-
225 files changed, 266 insertions(+), 266 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index 7405de26ee60..4b3c0208d0a5 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -45,7 +45,7 @@ Description:
The file /sys/devices/system/memory/memoryX/state
is read-write. When read, its contents show the
online/offline state of the memory section. When written,
- root can toggle the the online/offline state of a removable
+ root can toggle the online/offline state of a removable
memory section (see removable file description above)
using the following commands.
# echo online > /sys/devices/system/memory/memoryX/state
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 9f5ffd85560b..a232065a7c6a 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3415,7 +3415,7 @@ giving priority to the center of the metered area.</entry>
<row>
<entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant> </entry>
<entry>A multi-zone metering. The light intensity is measured
-in several points of the frame and the the results are combined. The
+in several points of the frame and the results are combined. The
algorithm of the zones selection and their significance in calculating the
final value is device dependent.</entry>
</row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
index f4e28e7d4751..721728745407 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
@@ -267,7 +267,7 @@ is intended for still imaging applications. The idea is to get the
best possible image quality that the hardware can deliver. It is not
defined how the driver writer may achieve that; it will depend on the
hardware and the ingenuity of the driver writer. High quality mode is
-a different mode from the the regular motion video capture modes. In
+a different mode from the regular motion video capture modes. In
high quality mode:<itemizedlist>
<listitem>
<para>The driver may be able to capture higher
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
index c6ef8f13dc7e..74607b6c1117 100644
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -8,7 +8,7 @@ Properties:
"qcom,kpss-timer" - krait subsystem
"qcom,scss-timer" - scorpion subsystem
-- interrupts : Interrupts for the the debug timer, the first general purpose
+- interrupts : Interrupts for the debug timer, the first general purpose
timer, and optionally a second general purpose timer in that
order.
diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
index 93986a5a8018..3bacc8e0931e 100644
--- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
+++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -9,7 +9,7 @@ Properties:
Compatibility with many Cavium evaluation boards.
-- reg: The base address of the the CF chip select banks. Depending on
+- reg: The base address of the CF chip select banks. Depending on
the device configuration, there may be one or two banks.
- cavium,bus-width: The width of the connection to the CF devices. Valid
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
index d63194a2c848..ada4e2973323 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
@@ -39,7 +39,7 @@ Optional Properties:
- lines-initial-states: Bitmask that specifies the initial state of each
line. When a bit is set to zero, the corresponding line will be initialized to
the input (pulled-up) state. When the bit is set to one, the line will be
- initialized the the low-level output state. If the property is not specified
+ initialized the low-level output state. If the property is not specified
all lines will be initialized to the input state.
The I/O expander can detect input state changes, and thus optionally act as
diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
index d9ee909d2b78..d71258e2d456 100644
--- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
@@ -59,7 +59,7 @@ Optional properties:
Each child node represents one channel and has the following
properties:
Required properties:
- * reg: Pair of pins the the channel is connected to.
+ * reg: Pair of pins the channel is connected to.
0: VP/VN
1: VAUXP[0]/VAUXN[0]
2: VAUXP[1]/VAUXN[1]
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index ec42935f3908..5235cbc551b0 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -9,7 +9,7 @@ Required properties:
Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width
defaults to 1 byte
-- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+- nand-skip-bbtscan: Indicates the BBT scanning should be skipped
- timings: array of 6 bytes for NAND timings. The meanings of these bytes
are:
byte 0 TCLR : CLE to RE delay in number of AHB clock cycles, only 4 bits
diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
index aa7ad622259d..877da34145b0 100644
--- a/Documentation/devicetree/bindings/net/broadcom-systemport.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
@@ -3,7 +3,7 @@
Required properties:
- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the the rx
+- interrupts: interrupts for the device, first cell must be for the rx
interrupts, and the second cell should be for the transmit queues. An
optional third interrupt cell for Wake-on-LAN can be specified
- local-mac-address: Ethernet MAC address (48 bits) of this adapter
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index aff22113a986..e54896427b4a 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -373,7 +373,7 @@ variation uses the path and optionally arg1 set to an autofs mount type.
The call returns 1 if this is a mount point and sets arg1 to the device
number of the mount and field arg2 to the relevant super block magic
number (described below) or 0 if it isn't a mountpoint. In both cases
-the the device number (as returned by new_encode_dev()) is returned
+the device number (as returned by new_encode_dev()) is returned
in field arg1.
If supplied with a file descriptor we're looking for a specific mount,
@@ -387,7 +387,7 @@ is one or 0 if it isn't a mountpoint.
If a path is supplied (and the ioctlfd field is set to -1) then the path
is looked up and is checked to see if it is the root of a mount. If a
type is also given we are looking for a particular autofs mount and if
-a match isn't found a fail is returned. If the the located path is the
+a match isn't found a fail is returned. If the located path is the
root of a mount 1 is returned along with the super magic of the mount
or 0 otherwise.
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index c6594af94d25..27fb3656ec8e 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -87,7 +87,7 @@ should contain the phy name as given in the dt data and in the case of
non-dt boot, it should contain the label of the PHY. The two
devm_phy_get associates the device with the PHY using devres on
successful PHY get. On driver detach, release function is invoked on
-the the devres data and devres data is freed. phy_optional_get and
+the devres data and devres data is freed. phy_optional_get and
devm_phy_optional_get should be used when the phy is optional. These
two functions will never return -ENODEV, but instead returns NULL when
the phy cannot be found.
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index 744f82f86c58..441dd2266531 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -453,7 +453,7 @@ putback_lru_page() function to add migrated pages back to the LRU.
mmap(MAP_LOCKED) SYSTEM CALL HANDLING
-------------------------------------
-In addition the mlock()/mlockall() system calls, an application can request
+In addition to the mlock()/mlockall() system calls, an application can request
that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 32cbbd565902..df27c39b2488 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1909,7 +1909,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
+ appended to the device tree bootargs property.
endchoice
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index d1c3f3a71c94..4f697edd0bad 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -22,7 +22,7 @@
#ifndef __ASSEMBLY__
-/* Unwind reason code according the the ARM EABI documents */
+/* Unwind reason code according to the ARM EABI documents */
enum unwind_reason_code {
URC_OK = 0, /* operation completed successfully */
URC_CONTINUE_UNWIND = 8,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 9e91a4e7519a..300bd6c004de 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -753,7 +753,7 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
}
/**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * _init_main_clk - get a struct clk * for the hwmod's main functional clk
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
@@ -791,7 +791,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
}
/**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
@@ -835,7 +835,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
}
/**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 01de542432a6..6f92e75b6c35 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -423,7 +423,7 @@ static void __init imote2_stargate2_init(void)
}
#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
+/* As the imote2 doesn't currently have a conventional SD slot
* there is no option to hotplug cards, making all this rather simple
*/
static int imote2_mci_get_ro(struct device *dev)
diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S
index b93170e1cc93..d0f01cff23b3 100644
--- a/arch/arm64/crypto/aes-neon.S
+++ b/arch/arm64/crypto/aes-neon.S
@@ -47,7 +47,7 @@
prepare .LReverse_Sbox, .LReverse_ShiftRows, \temp
.endm
- /* apply SubBytes transformation using the the preloaded Sbox */
+ /* apply SubBytes transformation using the preloaded Sbox */
.macro sub_bytes, in
sub v9.16b, \in\().16b, v12.16b
tbl \in\().16b, {v16.16b-v19.16b}, \in\().16b
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 86b5a095c5a1..9c8612385e00 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -480,7 +480,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
#ifdef CONFIG_EXACT_HWERR
/* Make sure all pending read/writes complete. This will ensure any
* accesses which could cause hardware errors completes, and signal
- * the the hardware before we do something silly, like crash the
+ * the hardware before we do something silly, like crash the
* kernel. We don't need to work around anomaly 05000312, since
* we are already atomic
*/
diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c
index 86318a16a252..dc21f94aaaaf 100644
--- a/arch/c6x/platforms/cache.c
+++ b/arch/c6x/platforms/cache.c
@@ -437,7 +437,7 @@ void __init c6x_cache_init(void)
if (!cache_base)
return;
- /* Set L2 caches on the the whole L2 SRAM memory */
+ /* Set L2 caches on the whole L2 SRAM memory */
L2_cache_set_mode(L2MODE_SIZE);
/* Enable L1 */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 45698cd15b7b..bd6ea40f3ef9 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -23,7 +23,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
* The pad bits in the middle are used to prevent the next_ticket number
* overflowing into the now_serving number.
*
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index 53e9dfacd073..3ea4168f28f7 100644
--- a/arch/ia64/include/asm/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -257,7 +257,7 @@ static inline int uv_numa_blade_id(void)
return 0;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return 0;
diff --git a/arch/m68k/platform/coldfire/intc-2.c b/arch/m68k/platform/coldfire/intc-2.c
index 995093357c59..f74f0e473119 100644
--- a/arch/m68k/platform/coldfire/intc-2.c
+++ b/arch/m68k/platform/coldfire/intc-2.c
@@ -7,7 +7,7 @@
* family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
* controllers, and the 547x and 548x families which have only one of them.
*
- * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * The external 7 fixed interrupts are part of the Edge Port unit of these
* ColdFire parts. They can be configured as level or edge triggered.
*
* (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff986a23..30052da1f1a4 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -211,7 +211,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
/*
* Get a pointer to where the new child's register block should have
* been pushed.
- * The Meta's stack grows upwards, and the context is the the first
+ * The Meta's stack grows upwards, and the context is the first
* thing to be pushed by TBX (phew)
*/
*childregs = *current_pt_regs();
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 0536bc021cc6..b417be09196d 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -445,7 +445,7 @@ TRAP_return: /* Make global symbol for debugging */
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look like the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index bfeb8f3c0be6..203767dbeb64 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -16,7 +16,7 @@
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
* is to trigger a wakeup.
*/
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index df69bfd2b006..4ec669f5b0d4 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index)
* offsetof() to determine the offsets into packet headers.
* For example, offsetof(ethhdr, protocol) returns the offset
* of the ethernet protocol field. The bitmask selects which
- * bytes to include the the tag, with bit offset X selecting
+ * bytes to include in the tag, with bit offset X selecting
* byte at offset X from the beginning of the packet data.
* @len: Number of bytes to include. Usually this is the sizeof()
* the field.
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index 78d201fb6c87..b6f41f6b6c70 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -31,7 +31,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*/
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index cd7114147ae7..6660ac807d5a 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -1191,7 +1191,7 @@ int __init kvm_mips_init(void)
* requires TLBs. The TLB handling code is statically linked with
* the rest of the kernel (tlb.c) to avoid the possibility of
* double faulting. The issue is that the TLB code references
- * routines that are part of the the KVM module, which are only
+ * routines that are part of the KVM module, which are only
* available once the module is loaded.
*/
kvm_mips_gfn_to_pfn = gfn_to_pfn;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 05b1d7cf9514..1647426364b9 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -350,7 +350,7 @@ static void co_cache_error_call_notifiers(unsigned long val)
}
/*
- * Called when the the exception is recoverable
+ * Called when the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -359,7 +359,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
}
/**
- * Called when the the exception is not recoverable
+ * Called when the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d428e8471eec..1d1eb1e10ae2 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -144,7 +144,7 @@ void xlr_percpu_fmn_init(void)
* For sending FMN messages, we need credits on the destination
* bucket. Program the credits this core has on the 128 possible
* destination buckets.
- * We cannot use a loop here, because the the first argument has
+ * We cannot use a loop here, because the first argument has
* to be a constant integer value.
*/
COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 34a05a1a990b..af6f17b32531 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -52,7 +52,7 @@ static inline void logmpp(u64 x)
/*
* For a snooping icache, we still need a dummy icbi to purge all the
* prefetched instructions from the ifetch buffers. We also need a sync
- * before the icbi to order the the actual stores to memory that might
+ * before the icbi to order the actual stores to memory that might
* have modified instructions with the icbi.
*/
#define PURGE_PREFETCHED_INS \
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index 334459ad145b..b3219b0ca2c4 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -246,7 +246,7 @@ static inline unsigned int ev_int_get_mask(unsigned int interrupt,
* ev_int_eoi - signal the end of interrupt processing
* @interrupt: the interrupt number
*
- * This function signals the end of processing for the the specified
+ * This function signals the end of processing for the specified
* interrupt, which must be the interrupt currently in service. By
* definition, this is also the highest-priority interrupt.
*
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index ac6432d9be46..a18702780733 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -30,7 +30,7 @@ struct arch_hw_breakpoint {
u16 len; /* length of the target data symbol */
};
-/* Note: Don't change the the first 6 bits below as they are in the same order
+/* Note: Don't change the first 6 bits below as they are in the same order
* as the dabr and dabrx.
*/
#define HW_BRK_TYPE_READ 0x01
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index d48125d0c048..01ecece4ca83 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -94,7 +94,7 @@ __secondary_hold_acknowledge:
#ifdef CONFIG_RELOCATABLE
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
- * is used by kexec-tools to keep the the kdump kernel in the
+ * is used by kexec-tools to keep the kdump kernel in the
* crash_kernel region. The loader is responsible for
* observing the alignment requirement.
*/
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index d8746684f606..a97b81d5cfa6 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -168,7 +168,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on powerpc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 7e70ae968e5f..bf66090de7cc 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -933,7 +933,7 @@ void flush_dcache_icache_hugepage(struct page *page)
* (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table
*
* So long as we atomically load page table pointers we are safe against teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 692998244d2c..a2ce00831362 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -9,7 +9,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * This file is a driver for the the General Purpose Timer (gpt) devices
+ * This file is a driver for the General Purpose Timer (gpt) devices
* found on the MPC5200 SoC. Each timer has an IO pin which can be used
* for GPIO or can be used to raise interrupts. The timer function can
* be used independently from the IO pin, or it can be used to control
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 7044fd36197b..864ced973445 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -251,7 +251,7 @@ static void briq_restart(char *cmd)
* Per default, input/output-device points to the keyboard/screen
* If no card is installed, the built-in serial port is used as a fallback.
* But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
- * the the built-in serial node. Instead, a /failsafe node is created.
+ * to the built-in serial node. Instead, a /failsafe node is created.
*/
static void chrp_init_early(void)
{
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index df241b11d4f7..b7bb2977e87a 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1421,7 +1421,7 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
/*
* This function is supposed to be called on basis of PE from top
- * to bottom style. So the the I/O or MMIO segment assigned to
+ * to bottom style. So the I/O or MMIO segment assigned to
* parent PE could be overrided by its child PEs if necessary.
*/
static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index ea0c7b2ef030..a0b4797a296d 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1128,7 +1128,7 @@ static void debug_sample_entry(struct hws_combined_entry *sample,
* combined-sampling data entry consists of a basic- and a diagnostic-sampling
* data entry. The sampling function is determined by the flags in the perf
* event hardware structure. The function always works with a combined-sampling
- * data entry but ignores the the diagnostic portion if it is not available.
+ * data entry but ignores the diagnostic portion if it is not available.
*
* Note that the implementation focuses on basic-sampling data entries and, if
* such an entry is not valid, the entire combined-sampling data entry is
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 639fce464008..2f03d7badf95 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -187,7 +187,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* prevent the pagetables from being freed on s390.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f49478..ef36086d3db1 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -306,7 +306,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
+ * firmware can sample the value before the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index 1aed0432c64b..74ed2d607036 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -189,7 +189,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on sparc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_disable();
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 71af5747874d..f7f64c80c5b2 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -116,7 +116,7 @@
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
* Likewise, INTCTRL_K is removed and re-added during device
- * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * interrupts, as is the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
* to know our current state.
diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h
index df10a662cc25..50a3d5cbad20 100644
--- a/arch/tile/include/gxio/trio.h
+++ b/arch/tile/include/gxio/trio.h
@@ -206,7 +206,7 @@ typedef struct {
/* Initialize a TRIO context.
*
* This function allocates a TRIO "service domain" and maps the MMIO
- * registers into the the caller's VA space.
+ * registers into the caller's VA space.
*
* @param trio_index Which TRIO shim; Gx36 must pass 0.
* @param context Context object to be initialized.
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index de07fa7d1315..c554ffbb50f7 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -277,7 +277,7 @@ P("\n");
/*
* Called after execve() has started the new image. This allows us
- * to reset the info state. Note that the the mmap'ed memory, if there
+ * to reset the info state. Note that the mmap'ed memory, if there
* was any, has already been unmapped by the exec.
*/
void single_step_execve(void)
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index 54f1c8068c02..04266c294db1 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -71,7 +71,7 @@ static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*
* We use an xadd covering *both* parts of the lock, to increment the tail and
* also load the position of the head, which takes care of memory ordering
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index c63e925fd6b7..361144223ed7 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -512,7 +512,7 @@ static inline int uv_numa_blade_id(void)
return uv_hub_info->numa_blade_id;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return uv_cpu_to_blade[cpu];
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 8f1e22d3b286..5dc89fb405be 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7219,7 +7219,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
if (current->mm == kvm->mm) {
/*
* Free memory regions allocated on behalf of userspace,
- * unless the the memory map has changed due to process exit
+ * unless the memory map has changed due to process exit
* or fd copying.
*/
struct kvm_userspace_memory_region mem;
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 207d9aef662d..a1f84cebb9aa 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -288,7 +288,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
@@ -360,7 +360,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_disable();
pgdp = pgd_offset(mm, addr);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 2e555163c2fe..80e25d7659a2 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -472,7 +472,7 @@ char * __init xen_memory_setup(void)
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
- * We tried to make the the memblock_reserve more selective so
+ * We tried to make the memblock_reserve more selective so
* that it would be clear what region is reserved. Sadly we ran
* in the problem wherein on a 64-bit hypervisor with a 32-bit
* initial domain, the pt_base has the cr3 value which is not
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 600781edc8a3..2e1d20d0b71f 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -6,7 +6,7 @@
* For the new V3 MMU we remap the TLB from virtual == physical
* to the standard Linux mapping used in earlier MMU's.
*
- * The the MMU we also support a new configuration register that
+ * In the MMU we also support a new configuration register that
* specifies how the S32C1I instruction operates with the cache
* controller.
*
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 82bbfa5a05b3..94044cc958c2 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -384,7 +384,7 @@ common_exception:
/* Save optional registers. */
save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
-
+
#ifdef CONFIG_TRACE_IRQFLAGS
l32i a4, a1, PT_DEPC
/* Double exception means we came here with an exception
@@ -433,7 +433,7 @@ common_exception_return:
* We need to check some flags for signal handling and rescheduling,
* and have to restore WB and WS, extra states, and all registers
* in the register file that were in use in the user task.
- * Note that we don't disable interrupts here.
+ * Note that we don't disable interrupts here.
*/
_bbsi.l a4, TIF_NEED_RESCHED, 3f
@@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
* of the proper size instead.
*
* This algorithm simply backs out the register changes started by the user
- * excpetion handler, makes it appear that we have started a window underflow
+ * exception handler, makes it appear that we have started a window underflow
* by rotating the window back and then setting the old window base (OWB) in
* the 'ps' register with the rolled back window base. The 'movsp' instruction
* will be re-executed and this time since the next window frames is in the
* active AR registers it won't cause an exception.
*
* If the WindowUnderflow code gets a TLB miss the page will get mapped
- * the the partial windeowUnderflow will be handeled in the double exception
+ * and the partial window underflow will be handled in the double exception
* handler.
*
* Entry condition:
@@ -1567,8 +1567,8 @@ ENTRY(fast_second_level_miss)
2: /* Special case for cache aliasing.
* We (should) only get here if a clear_user_page, copy_user_page
- * or the aliased cache flush functions got preemptively interrupted
- * by another task. Re-establish temporary mapping to the
+ * or the aliased cache flush functions got preemptively interrupted
+ * by another task. Re-establish temporary mapping to the
* TLBTEMP_BASE areas.
*/
diff --git a/crypto/asymmetric_keys/pkcs7_parser.h b/crypto/asymmetric_keys/pkcs7_parser.h
index d25f4d15370f..31a2ee79dae7 100644
--- a/crypto/asymmetric_keys/pkcs7_parser.h
+++ b/crypto/asymmetric_keys/pkcs7_parser.h
@@ -42,7 +42,7 @@ struct pkcs7_signed_info {
*
* This contains the generated digest of _either_ the Content Data or
* the Authenticated Attributes [RFC2315 9.3]. If the latter, one of
- * the attributes contains the digest of the the Content Data within
+ * the attributes contains the digest of the Content Data within
* it.
*/
struct public_key_signature sig;
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 6f1c616910ac..826a754954f3 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -47,7 +47,7 @@
/*
* Common set of includes for all ACPICA source files.
* We put them here because we don't want to duplicate them
- * in the the source code again and again.
+ * in the source code again and again.
*
* Note: The order of these include files is important.
*/
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 41519a958083..75e61da5d998 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -435,7 +435,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
* The 64-bit X fields are optional extensions to the original 32-bit FADT
* V1.0 fields. Even if they are present in the FADT, they are optional and
* are unused if the BIOS sets them to zero. Therefore, we must copy/expand
- * 32-bit V1.0 fields to the 64-bit X fields if the the 64-bit X field is
+ * 32-bit V1.0 fields to the 64-bit X fields if the 64-bit X field is
* originally zero.
*
* For ACPI 1.0 FADTs (that contain no 64-bit addresses), all 32-bit address
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index dd9dfa15e9d1..d086acf9562f 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -563,7 +563,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
wake_up_interruptible(&apm_waitqueue);
/*
- * Wait for the the suspend_acks_pending variable to drop to
+ * Wait for the suspend_acks_pending variable to drop to
* zero, meaning everybody acked the suspend event (or the
* process was killed.)
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 02225eb19cf6..619f3a30ec55 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -111,7 +111,7 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
}
/**
- * fifo_icap_set_read_size - Set the the size register.
+ * fifo_icap_set_read_size - Set the size register.
* @drvdata: a pointer to the drvdata.
* @data: the size of the following read transaction, in words.
**/
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index e431d11abf8d..231f0149c540 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -168,7 +168,7 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv)
/*
* Look for the timer stop flag in the different states, so that we know
* if the broadcast timer has to be set up. The loop is in the reverse
- * order, because usually one of the deeper states have this flag set.
+ * order, because usually one of the deeper states has this flag set.
*/
for (i = drv->state_count - 1; i >= 0 ; i--) {
if (drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP) {
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 5da5b98b8f29..60f2267c1350 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -53,7 +53,7 @@
#define CMD0_IRQ_THRESHOLD 1
/*
- * The timeout period (in jiffies) for a PDU. When the the number of PDUs in
+ * The timeout period (in jiffies) for a PDU. When the number of PDUs in
* flight is greater than the STAT_IRQ_THRESHOLD or 0 the timer is disabled.
* When there are packets in flight but lower than the threshold, we enable
* the timer and at expiry, attempt to remove any processed packets from the
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 1c73f4fbc252..2f2a4276a014 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -435,7 +435,7 @@ static int hash_get_device_data(struct hash_ctx *ctx,
* @keylen: The lengt of the key.
*
* Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the the hw design spec. Either due to incorrect info in the
+ * specified in the hw design spec. Either due to incorrect info in the
* spec or due to a bug in the hw.
*/
static void hash_hw_write_key(struct hash_device_data *device_data,
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 3784e81e7762..d548a717d5b9 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -471,7 +471,7 @@ static int ichx_gpio_probe(struct platform_device *pdev)
/*
* If necessary, determine the I/O address of ACPI/power management
- * registers which are needed to read the the GPE0 register for GPI pins
+ * registers which are needed to read the GPE0 register for GPI pins
* 0 - 15 on some chipsets.
*/
if (!ichx_priv.desc->uses_gpe0)
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 41e91d70301e..9b43e701db28 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -111,7 +111,7 @@ static int sch_gpio_core_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
@@ -201,7 +201,7 @@ static int sch_gpio_resume_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 04a209e2b66d..ff92d4c5e379 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -529,12 +529,12 @@ EXPORT_SYMBOL(drm_mm_replace_node);
*
* The DRM range allocator supports this use-case through the scanning
* interfaces. First a scan operation needs to be initialized with
- * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The the driver adds
+ * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The driver adds
* objects to the roaster (probably by walking an LRU list, but this can be
* freely implemented) until a suitable hole is found or there's no further
* evitable object.
*
- * The the driver must walk through all objects again in exactly the reverse
+ * The driver must walk through all objects again in exactly the reverse
* order to restore the allocator state. Note that while the allocator is used
* in the scan mode no other operation is allowed.
*
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ad55b06a3cb1..a73c82dff95f 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2366,7 +2366,7 @@ int __i915_add_request(struct intel_engine_cs *ring,
/* Whilst this request exists, batch_obj will be on the
* active_list, and so will hold the active reference. Only when this
- * request is retired will the the batch_obj be moved onto the
+ * request is retired will the batch_obj be moved onto the
* inactive_list and lose its active reference. Hence we do not need
* to explicitly hold another reference here.
*/
diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c
index d38413997379..7a6a4fed2833 100644
--- a/drivers/gpu/drm/i915/i915_gem_userptr.c
+++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
@@ -225,7 +225,7 @@ i915_mmu_notifier_add(struct drm_device *dev,
* either has cancelled gup work queued and we need to
* return back to the user to give time for the gup-workers
* to flush their object references upon which the object will
- * be removed from the interval-tree, or the the range is
+ * be removed from the interval-tree, or the range is
* still in use by another client and the overlap is invalid.
*
* If we do have an overlap, we cannot use the interval tree
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d8324c69fa86..7b3d64f2ad3f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2607,7 +2607,7 @@ void intel_display_handle_reset(struct drm_device *dev)
* will get its events and not get stuck.
*
* Also update the base address of all primary
- * planes to the the last fb to make sure we're
+ * planes to the last fb to make sure we're
* showing the correct fb after a reset.
*
* Need to make two loops over the crtcs so that we
@@ -10854,7 +10854,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
}
/* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
+ * update the output configuration. */
intel_modeset_update_state(dev, prepare_pipes);
if (dev_priv->display.modeset_global_resources)
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 92be50c39ffd..2be3040b28f1 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -2802,8 +2802,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t
ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 00c0d2ba22d3..36af5f14f622 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -353,7 +353,7 @@
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 12c8329644c4..212cc45defc7 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -379,7 +379,7 @@ void radeon_doorbell_free(struct radeon_device *rdev, u32 doorbell)
/*
* radeon_wb_*()
- * Writeback is the the method by which the the GPU updates special pages
+ * Writeback is the method by which the GPU updates special pages
* in memory with the status of certain GPU events (fences, ring pointers,
* etc.).
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 913787085dfa..d616aea4a52c 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -45,7 +45,7 @@
* for GPU/CPU synchronization. When the fence is written,
* it is expected that all buffers associated with that fence
* are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed. Whether
+ * that the relevant GPU caches have been flushed. Whether
* we use a scratch register or memory location depends on the asic
* and whether writeback is enabled.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c
index 088ffdc2f577..6dbaac58c81e 100644
--- a/drivers/gpu/drm/radeon/radeon_vm.c
+++ b/drivers/gpu/drm/radeon/radeon_vm.c
@@ -40,8 +40,8 @@
* can be mapped as snooped (cached system pages) or unsnooped
* (uncached system pages).
* Each VM has an ID associated with it and there is a page table
- * associated with each VMID. When execting a command buffer,
- * the kernel tells the the ring what VMID to use for that command
+ * associated with each VMID. When executing a command buffer,
+ * the kernel tells the ring what VMID to use for that command
* buffer. VMIDs are allocated dynamically as commands are submitted.
* The userspace drivers maintain their own address space and the kernel
* sets up their pages tables accordingly when they submit their
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 531a593912ec..90947e08e44d 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -553,7 +553,7 @@ EXPORT_SYMBOL_GPL(vmbus_close);
* vmbus_sendpacket() - Send the specified buffer on the given channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @requestid: Identifier of the request
* @type: Type of packet that is being send e.g. negotiate, time
* packet etc.
@@ -730,7 +730,7 @@ EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
* vmbus_recvpacket() - Retrieve the user packet on the specified channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @buffer_actual_len: The actual size of the data after it was received
* @requestid: Identifier of the request
*
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 4d6b26979fbd..5a358e591403 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -849,8 +849,8 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the information we
- * need from DSDT.
+ * VMBUS is an acpi enumerated device. Get the IRQ information
+ * from DSDT.
*/
static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index 033d6aca47d3..d41d7e3bf31c 100644
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -117,7 +117,7 @@ static int ucd9200_probe(struct i2c_client *client,
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
- * for the the phases of the rail.
+ * for the phases of the rail.
*/
for (i = 0; i < info->pages; i++) {
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 28cfe97cf1e9..231b54591e2b 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -87,7 +87,7 @@
* These 3 values (SDR and DDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
+ * are also the possible values for ipath_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define IPATH_IB_SDR 1
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index c00ae093b6f8..6b6499a690af 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -333,7 +333,7 @@ struct qib_verbs_txreq {
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for qib_link_speed_enabled and active
+ * are also the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 8c7d94200bdb..c1418e619f0c 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -17,7 +17,7 @@
/*
* Timer function which is run every scan_ms ms when the device is opened.
- * The dev input variable is set to the the input_dev pointer.
+ * The dev input variable is set to the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_polled_dev *dev)
{
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 114f3bcba1b0..24c15bfb2199 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1566,7 +1566,7 @@ reset_hfcsusb(struct hfcsusb *hw)
write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
((hw->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 6590558d1d31..010d3c6cd5f4 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -202,7 +202,7 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
/*:*/
/*H:030
- * Let's jump straight to the the main loop which runs the Guest.
+ * Let's jump straight to the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
* going around and around until something interesting happens.
*/
diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h
index e404b6e44802..ce0fb855c705 100644
--- a/drivers/media/dvb-frontends/tda1002x.h
+++ b/drivers/media/dvb-frontends/tda1002x.h
@@ -1,6 +1,6 @@
/*
TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index 71fb63299de7..17534ff576ca 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1134,7 +1134,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
state->pll_pfactor = 0;
}
- /* Establish any defaults the the user didn't pass */
+ /* Establish any defaults the user didn't pass */
tda10048_establish_defaults(&state->frontend);
/* Set the xtal and freq defaults */
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..1f8820f5f8c0 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -37,7 +37,7 @@
(compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
/* We calculate the baseband frequencies of the carrier and the pilot tones
- * based on the the sampling rate of the audio rds fifo. */
+ * based on the sampling rate of the audio rds fifo. */
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index 2ad65eb29832..00e0818abfc9 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -555,7 +555,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f)
reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94);
/* Okay, we've wasted time working out the correct value,
- but if we use it, it fouls the the window alignment.
+ but if we use it, it fouls the window alignment.
Fudge it to what we want... */
reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16));
reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16));
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 1bf06970ca3e..ab627dfd7b28 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -636,7 +636,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
}
/* Check that the hardware is accessible. If the status bytes are
- * 0xFF then the device is not accessible, the the IRQ belongs
+ * 0xFF then the device is not accessible, the IRQ belongs
* to another driver.
* 4 x u32 interrupt registers.
*/
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 33b9660b7f77..6ea16e20449d 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -316,7 +316,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
* vpbe_get_output - Get output
* @vpbe_dev - vpbe device ptr
*
- * return current vpbe output to the the index
+ * return current vpbe output to the index
*/
static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
{
diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 3d2babd5067a..b8181874a149 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -505,7 +505,7 @@ static int fimc_capture_open(struct file *file)
if (ret == 0 && vc->user_subdev_api && vc->inh_sensor_ctrls) {
/*
- * Recreate controls of the the video node to drop
+ * Recreate controls of the video node to drop
* any controls inherited from the sensor subdev.
*/
fimc_ctrls_delete(vc->ctx);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 2c7aa6720569..5b8a0e779d0f 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1710,7 +1710,7 @@ void omap3isp_print_status(struct isp_device *isp)
* To solve this problem power management support is split into prepare/complete
* and suspend/resume operations. The pipelines are stopped in prepare() and the
* ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
- * resume(), and the the pipelines are restarted in complete().
+ * resume(), and the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not modelled explicitly
* yet.
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index d56f927fc31a..b5d2e805380d 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 474a17e4db0c..4c7f8fed8046 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h
index 0f461ca10cb9..82d19dcdebc0 100644
--- a/drivers/media/usb/dvb-usb/friio.h
+++ b/drivers/media/usb/dvb-usb/friio.h
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
index 52bdb569760b..414c1b752911 100644
--- a/drivers/media/usb/gspca/finepix.c
+++ b/drivers/media/usb/gspca/finepix.c
@@ -143,7 +143,7 @@ again:
* for, then it's the end of the
* frame. Sometimes the jpeg is not complete,
* but there's nothing we can do. We also end
- * here if the the jpeg ends right at the end
+ * here if the jpeg ends right at the end
* of the frame. */
gspca_frame_add(gspca_dev, LAST_PACKET,
data, len);
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 2e8c3afe4ec4..b7b5a1f630af 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1313,7 +1313,7 @@ static int tm6000_usb_probe(struct usb_interface *interface,
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
-/* check if the the device has the iso in endpoint at the correct place */
+/* check if the device has the iso in endpoint at the correct place */
if (!dev->isoc_in.endp) {
printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
rc = -ENODEV;
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 9144a2f3ed82..62adffa2bd50 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1000,7 +1000,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
}
/* Synchronize to the input stream by waiting for the FID bit to be
- * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE.
* stream->last_fid is initialized to -1, so the first isochronous
* frame will always be in sync.
*
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index d15e16737eef..32d8d6a07e99 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -981,7 +981,7 @@ static void v4l_sanitize_format(struct v4l2_format *fmt)
/*
* The v4l2_pix_format structure has been extended with fields that were
* not previously required to be set to zero by applications. The priv
- * field, when set to a magic value, indicates the the extended fields
+ * field, when set to a magic value, indicates that the extended fields
* are valid. Otherwise they will contain undefined values. To simplify
* the API towards drivers zero the extended fields and set the priv
* field to the magic value when the extended pixel format structure
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 04644e7b42b1..303b322756c7 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -373,7 +373,7 @@ static const struct lpddr2_addressing *get_addressing_table(
}
/*
- * Find the the right timing table from the array of timing
+ * Find the right timing table from the array of timing
* tables of the device using DDR clock frequency
*/
static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 787933d43d32..4328cf6ecf13 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
* @target: per target private data
* @sdev: SCSI device
*
- * Update the target negotiation parameters based on the the Inquiry
+ * Update the target negotiation parameters based on the Inquiry
* data, adapter capabilities, and NVRAM settings.
**/
static void
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 193cf168ba84..5d03af1f5103 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -898,7 +898,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
- * This function sets the the operating point of the ARM.
+ * This function sets the operating point of the ARM.
*/
int db8500_prcmu_set_arm_opp(u8 opp)
{
diff --git a/drivers/misc/mic/bus/mic_bus.c b/drivers/misc/mic/bus/mic_bus.c
index 961ae90aae47..1b15af8c5101 100644
--- a/drivers/misc/mic/bus/mic_bus.c
+++ b/drivers/misc/mic/bus/mic_bus.c
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ drivers/virtio/virtio.c
*/
#include <linux/slab.h>
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 913de07e577c..6482a9c4eb44 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -48,7 +48,7 @@
* kernel/user requirements.
*
* Blade percpu resources reserved for kernel use. These resources are
- * reserved whenever the the kernel context for the blade is loaded. Note
+ * reserved whenever the kernel context for the blade is loaded. Note
* that the kernel context is not guaranteed to be always available. It is
* loaded on demand & can be stolen by a user if the user demand exceeds the
* kernel demand. The kernel can always reload the kernel context but
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 95c894482fdd..f87520cfb787 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1594,7 +1594,7 @@ out_2:
* by xpc_notify_senders_of_disconnect_uv(), and to also get an
* error returned here will confuse them. Additionally, since
* in this case the channel is being disconnected we don't need
- * to put the the msg_slot back on the free list.
+ * to put the msg_slot back on the free list.
*/
if (cmpxchg(&msg_slot->func, func, NULL) != func) {
ret = xpSuccess;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 959cb9b70310..c5b1237ecb33 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -942,7 +942,7 @@ static uint8_t gpmi_read_byte(struct mtd_info *mtd)
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
- * because the the operations are the same.
+ * because the operations are the same.
*/
static void block_mark_swapping(struct gpmi_nand_data *this,
void *payload, void *auxiliary)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 7bf416329c19..3430b17875b5 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -252,7 +252,7 @@ struct ubi_fm_pool {
/**
* struct ubi_volume - UBI volume description data structure.
- * @dev: device object to make use of the the Linux device model
+ * @dev: device object to make use of the Linux device model
* @cdev: character device object to create character device
* @ubi: reference to the UBI device description object
* @vol_id: volume ID
@@ -380,7 +380,7 @@ struct ubi_debug_info {
/**
* struct ubi_device - UBI device description structure
- * @dev: UBI device object to use the the Linux device model
+ * @dev: UBI device object to use for the Linux device model
* @cdev: character device object to create character device
* @ubi_num: UBI device number
* @ubi_name: UBI device name
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 20f491713145..72b64109a22f 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -727,7 +727,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
/**
* sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
- * @e: the the physical eraseblock to erase
+ * @e: the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
*
* This function returns zero in case of success and a negative error code in
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 5e8b5609c067..ad5bfe8618a6 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -532,7 +532,7 @@ static int xcan_rx(struct net_device *ndev)
* @isr: interrupt status register value
*
* This is the CAN error interrupt and it will
- * check the the type of error and forward the error
+ * check the type of error and forward the error
* frame to upper layers.
*/
static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index 25d6b2a10e4e..a6fa3c211f69 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1234,7 +1234,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
* @budget : maximum number of packets that the current CPU can receive from
* all interfaces.
* Description :
- * This function implements the the reception process.
+ * This function implements the reception process.
* Also it runs the TX completion thread
*/
static int xgmac_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 93ff8ef39352..50a7353a85c8 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2363,7 +2363,7 @@ static irqreturn_t be_intx(int irq, void *dev)
}
be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- /* Return IRQ_HANDLED only for the the first spurious intr
+ /* Return IRQ_HANDLED only for the first spurious intr
* after a valid intr to stop the kernel from branding
* this irq as a bad one!
*/
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 1acf5034db10..ee82072b4c08 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -3986,7 +3986,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
* @hw: Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*/
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 48b74a549155..392eb5748897 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3892,7 +3892,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
* @hw: pointer to the HW structure
*
* ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
- * register, so the the bus width is hard coded.
+ * register, so the bus width is hard coded.
**/
static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 236a6183a865..0172e6b70eee 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2166,7 +2166,7 @@ out:
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 87bd53fdd209..81e6836f38ee 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -229,7 +229,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
struct pci_dev *pdev;
- /* determine whether to use the the parent device
+ /* determine whether to use the parent device
*/
if (ixgbe_pcie_from_parent(&adapter->hw))
pdev = adapter->pdev->bus->parent->self;
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index f5e4b820128b..aad8fdb4dfc6 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2158,7 +2158,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
/*
* In PCI 33 mode, the P_PLL is not used, and therefore,
- * the the P_PLL_LOCK bit in the adapter_status register will
+ * the P_PLL_LOCK bit in the adapter_status register will
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 3b67d60d4378..b8da6e89059a 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -83,7 +83,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* returns: 0 on success, -ETIMEDOUT on a timeout
*
* Writes the value to the requested register by first writing the value
- * into MWD register. The the MCR register is then appropriately setup
+ * into MWD register. The MCR register is then appropriately setup
* to finish the write operation.
*/
static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 5a34e72bab9a..6113a29f01bc 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -250,14 +250,14 @@ struct i2400m_barker_db;
*
* @bus_setup: [optional fill] Function called by the bus-generic code
* [i2400m_setup()] to setup the basic bus-specific communications
- * to the the device needed to load firmware. See LIFE CYCLE above.
+ * to the device needed to load firmware. See LIFE CYCLE above.
*
* NOTE: Doesn't need to upload the firmware, as that is taken
* care of by the bus-generic code.
*
* @bus_release: [optional fill] Function called by the bus-generic
* code [i2400m_release()] to shutdown the basic bus-specific
- * communications to the the device needed to load firmware. See
+ * communications to the device needed to load firmware. See
* LIFE CYCLE above.
*
* This function does not need to reset the device, just tear down
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 0b602951ff6b..4466ee71d1e4 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -693,7 +693,7 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq,
* right spot where to insert the packet; we know the queue is
* not empty, so we are not the first ones; we also know we
* are not going to be the last ones. The list is sorted, so
- * we have to insert before the the first guy with an nsn_itr
+ * we have to insert before the first guy with an nsn_itr
* greater that our nsn. */
skb_queue_walk(&roq->queue, skb_itr) {
roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb;
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index f20886ade1cc..1f7b2b922fae 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -233,7 +233,7 @@
* i2400m_tx_skip_tail() Marks unusable FIFO tail space
* i2400m->bus_tx_kick()
*
- * Now i2400m->bus_tx_kick() is the the bus-specific driver backend
+ * Now i2400m->bus_tx_kick() is the bus-specific driver backend
* implementation; that would do:
*
* i2400m->bus_tx_kick()
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index 1c584c4b019c..f34f24d362ed 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -77,7 +77,7 @@ struct rx_attention {
* first_msdu is set.
*
* peer_idx_invalid
- * Indicates no matching entries within the the max search
+ * Indicates no matching entries within the max search
* count. Only set when first_msdu is set.
*
* peer_idx_timeout
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index dc6bd8cd9b83..e32154fe1732 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -98,7 +98,7 @@ struct bus_request {
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- * implemented using the asynchronous mode allowing the the bus
+ * implemented using the asynchronous mode allowing the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 339d89f14d32..8c866de2fe43 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1173,7 +1173,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
* Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
+ * response is available in the FIFO
*
* CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index 9a2afa2c690b..5184d6cbcb90 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -638,7 +638,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN,
AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT);
- /* on AR92xx, the highest bit of count will make the the chip send
+ /* on AR92xx, the highest bit of count will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 542a8d51d3b0..5c8f1e6da5dc 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1627,7 +1627,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
- /* on AR93xx and newer, count = 0 will make the the chip send
+ /* on AR93xx and newer, count = 0 will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index a1f1127d7808..24cce9db3ce0 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -1609,7 +1609,7 @@ struct wcn36xx_hal_config_bss_params {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -1746,7 +1746,7 @@ struct wcn36xx_hal_config_bss_params_v1 {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -3736,10 +3736,10 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
/* success or failure */
u32 status;
- /* Length of the responce message */
+ /* Length of the response message */
u32 rsp_length;
- /* FIXME: Currently considering the the responce will be less than
+ /* FIXME: Currently considering that the response will be less than
* 100bytes */
u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
} __packed;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 1b474828d5b8..46a0d6575454 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3819,7 +3819,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
}
/*
- * Suspend the the MAC and update the slot timing
+ * Suspend the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index d6073f67b212..c2f550cfbf41 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -189,7 +189,7 @@ enum iwl_tx_flags {
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
+ * @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @key: security key
* @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
@@ -552,7 +552,7 @@ struct iwl_extended_beacon_notif {
/**
* enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
+ * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
index 6cc243f7cf60..8357397cf7d0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
@@ -65,7 +65,7 @@
#include "fw-api.h"
#include "mvm.h"
-/* Maps the driver specific channel width definition to the the fw values */
+/* Maps the driver specific channel width definition to the fw values */
static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
{
switch (chandef->width) {
@@ -86,7 +86,7 @@ static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
/*
* Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
+ * freq) definitions to the fw values
*/
static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index 2713f7acd35e..53618b0e29c0 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -262,7 +262,7 @@ free_and_exit:
* This function is called when the 'fw_dump' file is opened for
* reading.
* This function dumps firmware memory in different files
- * (ex. DTCM, ITCM, SQRAM etc.) based on the the segments for
+ * (ex. DTCM, ITCM, SQRAM etc.) based on the segments for
* debugging.
*/
static ssize_t
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 8428858204a6..e1f05ad89d9e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -596,7 +596,7 @@ static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
* rsi_sdio_host_intf_read_pkt() - This function reads the packet
from the device.
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
* @length: Length of the data to be read from the device.
*
* Return: 0 on success, -1 on failure.
@@ -627,7 +627,7 @@ int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter,
* rsi_init_sdio_interface() - This function does init specific to SDIO.
*
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
*
* Return: 0 on success, -1 on failure.
*/
diff --git a/drivers/net/wireless/ti/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h
index 2bdec38699f4..bfe998947957 100644
--- a/drivers/net/wireless/ti/wl1251/acx.h
+++ b/drivers/net/wireless/ti/wl1251/acx.h
@@ -1243,7 +1243,7 @@ struct wl1251_acx_arp_filter {
u8 address[16]; /* The IP address used to filter ARP packets.
ARP packets that do not match this address are
dropped. When the IP Version is 4, the last 12
- bytes of the the address are ignored. */
+ bytes of the address are ignored. */
} __attribute__((packed));
struct wl1251_acx_ac_cfg {
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 293ed4b687ba..be53777b9f3d 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1849,7 +1849,7 @@ static void of_alias_add(struct alias_prop *ap, struct device_node *np,
* of_alias_scan - Scan all properties of 'aliases' node
*
* The function scans all the properties of 'aliases' node and populate
- * the the global lookup table with the properties. It returns the
+ * the global lookup table with the properties. It returns the
* number of alias_prop found, or error code in error case.
*
* @dt_alloc: An allocator that provides a virtual address to memory
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 6cd5160fc057..89f16d320ead 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -36,7 +36,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#define pr_fmt(fmt) "acpiphp_glue: " fmt
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
index 7dfef3ee5b53..40511e39cea5 100644
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ b/drivers/pcmcia/pxa2xx_hx4700.c
@@ -33,7 +33,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/*
* IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
* The asic3 default IRQ type is level trigger low level detect, exactly
- * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+ * the signal present on GPIOD4_CF_nCD when a CF card is inserted.
* If the IRQ type is not changed, the asic3 interrupt handler will loop
* repeatedly because it is unable to clear the level trigger interrupt.
*/
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index e7cab07eef47..37060a07f260 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1250,7 +1250,7 @@ static int nmk_gpio_probe(struct platform_device *dev)
platform_set_drvdata(dev, nmk_chip);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 60464a2648aa..67a538ebea90 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1461,7 +1461,7 @@ static int at91_gpio_of_irq_setup(struct device_node *node,
writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 750a20275664..b01c7698df02 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -298,8 +298,9 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
ret = power_supply_show_property(dev, attr, prop_buf);
if (ret == -ENODEV || ret == -ENODATA) {
- /* When a battery is absent, we expect -ENODEV. Don't abort;
- send the uevent with at least the the PRESENT=0 property */
+ /* When a battery is absent, we expect -ENODEV.
+ * Don't abort; send the uevent with at least
+ * the PRESENT=0 property */
ret = 0;
continue;
}
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index ccf54f06396b..2108302cc965 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -122,7 +122,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
- * configurations, so we use the the first method there, stripping off
+ * configurations, so we use the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index fd22c811cbe1..8a84e2e42ca2 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3454,7 +3454,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 2035b0d64351..e62a7346428a 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1983,7 +1983,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
/*
* Device's PID has changed. We need to cleanup
* and re-login. If there is another device with
- * the the newly discovered pid, send an scn notice
+ * the newly discovered pid, send an scn notice
* so that its new pid can be discovered.
*/
list_for_each(qe, &rport->port->rport_q) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 00ee0ed642aa..0b88610b9795 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -510,7 +510,7 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
* @skb: The receive skb
* @netdev: The associated net device
* @ptype: The packet_type structure which was used to register this handler
- * @orig_dev: The original net_device the the skb was received on.
+ * @orig_dev: The original net_device that the skb was received on.
* (in case dev is a bond)
*
* Returns: 0 for success
@@ -2727,7 +2727,7 @@ module_exit(fcoe_exit);
* fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
* @seq: active sequence in the FLOGI or FDISC exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
@@ -2756,7 +2756,7 @@ done:
* fcoe_logo_resp() - FCoE specific LOGO response handler
* @seq: active sequence in the LOGO exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 34a1b1f333b4..65a53a9eb059 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -213,7 +213,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new)
* that doesn't have a priv (fcf was deleted). However,
* libfcoe will always delete FCFs before trying to add
* them. This is ensured because both recv_adv and
- * age_fcfs are protected by the the fcoe_ctlr's mutex.
+ * age_fcfs are protected by the fcoe_ctlr's mutex.
* This means that we should never get a FCF with a
* non-NULL priv pointer.
*/
@@ -694,7 +694,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
*
* The caller must check that the length is a multiple of 4.
* The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
- * The the skb must also be an fc_frame.
+ * The skb must also be an fc_frame.
*
* This is called from the lower-level driver with spinlocks held,
* so we must not take a mutex here.
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 22a9bb1abae1..025ec5c10978 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -244,7 +244,7 @@ enum sci_controller_states {
SCIC_INITIALIZED,
/**
- * This state indicates the the controller is in the process of becoming
+ * This state indicates that the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 47a013fffae7..07af745220eb 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete(
* permitted. This state is entered from the INITIAL state. This state
* is entered from the STOPPING state.
*
- * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * @SCI_DEV_STARTING: This state indicates that the remote device is in
* the process of becoming ready (i.e. starting). In this state no new
* IO operations are permitted. This state is entered from the STOPPED
* state.
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
index c7ee81d01125..f22950b12b8b 100644
--- a/drivers/scsi/isci/remote_node_context.h
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state {
/**
* struct sci_remote_node_context - This structure contains the data
* associated with the remote node context object. The remote node context
- * (RNC) object models the the remote device information necessary to manage
+ * (RNC) object models the remote device information necessary to manage
* the silicon RNC.
*/
struct sci_remote_node_context {
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 5d6fda72d659..ba330e56bfe7 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -67,7 +67,7 @@
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
-* @ihost: host on which the the request was queued
+* @ihost: host on which the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 6eed9e76a166..20bdd0603108 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1680,7 +1680,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -1713,7 +1713,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -1846,7 +1846,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -1878,7 +1878,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 7a5d81a65be8..5a447c2c6522 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5813,7 +5813,7 @@ reject_out:
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful, the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 2a17e31265b8..fbad2c534691 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2012,7 +2012,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so that the round robin selection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
@@ -5727,7 +5727,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
}
/* This routine decrements the reference count for a ndlp structure. If the
- * count goes to 0, this indicates the the associated nodelist should be
+ * count goes to 0, this indicates that the associated nodelist should be
* freed. Returning 1 indicates the ndlp resource has been released; on the
* other hand, returning 0 indicates the ndlp resource has not been released
* yet.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index a5769a9960ac..ae2d01f7e67d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3903,7 +3903,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelevant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 1f292e29d566..d9a9ddbf1771 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2265,7 +2265,7 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * that the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 32ada0505576..a24a0b1e59d4 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -16748,7 +16748,7 @@ out:
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index dd12c6fe57a6..7508ee4810a8 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3212,7 +3212,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when HBA driver received the identify done event or initiate FIS received
* event(for SATA), it will invoke this function to notify the sas layer that
- * the sas toplogy has formed, please discover the the whole sas domain,
+ * the sas toplogy has formed, please discover the whole sas domain,
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 80b8408ac3e3..4cbdc43d509c 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -354,7 +354,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
{
/*
* On all 4xx PPC's the SPI bus is shared/multiplexed with
- * the 2nd I2C bus. We need to enable the the SPI bus before
+ * the 2nd I2C bus. We need to enable the SPI bus before
* using it.
*/
diff --git a/drivers/staging/android/ion/ion.c b/drivers/staging/android/ion/ion.c
index 270360912b2c..200ea0ccf7c4 100644
--- a/drivers/staging/android/ion/ion.c
+++ b/drivers/staging/android/ion/ion.c
@@ -901,7 +901,7 @@ void ion_pages_sync_for_device(struct device *dev, struct page *page,
sg_set_page(&sg, page, size, 0);
/*
* This is not correct - sg_dma_address needs a dma_addr_t that is valid
- * for the the targeted device, but this works on the currently targeted
+ * for the targeted device, but this works on the currently targeted
* hardware.
*/
sg_dma_address(&sg) = page_to_phys(page);
diff --git a/drivers/staging/android/uapi/binder.h b/drivers/staging/android/uapi/binder.h
index 904adb7600cf..1dd36442263e 100644
--- a/drivers/staging/android/uapi/binder.h
+++ b/drivers/staging/android/uapi/binder.h
@@ -265,7 +265,7 @@ enum binder_driver_return_protocol {
BR_FAILED_REPLY = _IO('r', 17),
/*
- * The the last transaction (either a bcTRANSACTION or
+ * The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
};
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 831b7c6fe494..3f1f28e2dce2 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -1234,7 +1234,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
/* Initialize the Space Available Register */
writel(0, &rxmac->space_avail);
- /* Initialize the the mif_ctrl register
+ /* Initialize the mif_ctrl register
* bit 3: Receive code error. One or more nibbles were signaled as
* errors during the reception of the packet. Clear this
* bit in Gigabit, set it in 100Mbit. This was derived
diff --git a/drivers/staging/lustre/lustre/llite/file.c b/drivers/staging/lustre/lustre/llite/file.c
index fd1b75a3a569..6c40b3665521 100644
--- a/drivers/staging/lustre/lustre/llite/file.c
+++ b/drivers/staging/lustre/lustre/llite/file.c
@@ -364,7 +364,7 @@ int ll_file_release(struct inode *inode, struct file *file)
fd = LUSTRE_FPRIVATE(file);
LASSERT(fd != NULL);
- /* The last ref on @file, maybe not the the owner pid of statahead.
+ /* The last ref on @file, maybe not the owner pid of statahead.
* Different processes can open the same dir, "ll_opendir_key" means:
* it is me that should stop the statahead thread. */
if (S_ISDIR(inode->i_mode) && lli->lli_opendir_key == fd &&
diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
index 5e4e49fab63c..815c5866cb4b 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
@@ -447,7 +447,7 @@ struct timeout_item* ptlrpc_new_timeout(int time, enum timeout_event event,
}
/**
- * Register timeout event on the the pinger thread.
+ * Register timeout event on the pinger thread.
* Note: the timeout list is an sorted list with increased timeout value.
*/
static struct timeout_item*
diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index 104b01fa0fad..803ddfb8d065 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -453,7 +453,7 @@ u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network *pnetwork)
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the connection. */
+ /* If the driver wants to use the bssid to create the connection. */
/* If not, we have to copy the connecting AP's MAC address to it so that */
/* the driver just has the bssid information for PMKIDList searching. */
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 73410ccfb1ec..ebefffd2e96a 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -920,7 +920,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
int i;
struct ieee80211_rxb *rxb = NULL;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.c b/drivers/staging/rtl8712/rtl871x_cmd.c
index d9c1561e3272..5aae4cce8477 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -527,7 +527,7 @@ u8 r8712_joinbss_cmd(struct _adapter *padapter, struct wlan_network *pnetwork)
memcpy(&psecuritypriv->authenticator_ie[1],
&psecnetwork->IEs[12], (256-1));
psecnetwork->IELength = 0;
- /* If the the driver wants to use the bssid to create the connection.
+ /* If the driver wants to use the bssid to create the connection.
* If not, we copy the connecting AP's MAC address to it so that
* the driver just has the bssid information for PMKIDList searching.
*/
diff --git a/drivers/staging/rtl8723au/core/rtw_cmd.c b/drivers/staging/rtl8723au/core/rtw_cmd.c
index 7241a5a8731c..611cd1f6c555 100644
--- a/drivers/staging/rtl8723au/core/rtw_cmd.c
+++ b/drivers/staging/rtl8723au/core/rtw_cmd.c
@@ -518,7 +518,7 @@ int rtw_joinbss_cmd23a(struct rtw_adapter *padapter,
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the
+ /* If the driver wants to use the bssid to create the
* connection. If not, we have to copy the connecting AP's
* MAC address to it so that the driver just has the bssid
* information for PMKIDList searching. */
diff --git a/drivers/staging/unisys/common-spar/include/channels/iochannel.h b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
index 24e11858e0ee..0fce4fd54ce9 100644
--- a/drivers/staging/unisys/common-spar/include/channels/iochannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
@@ -595,7 +595,7 @@ struct uiscmdrsp_scsitaskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
@@ -642,7 +642,7 @@ struct uiscmdrsp_vdiskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
diff --git a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
index 8facb51143ae..9dc629f36cc1 100644
--- a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
@@ -68,11 +68,11 @@ typedef struct _ULTRA_VBUS_HEADERINFO {
u32 devInfoCount; /* num of items in DevInfo member */
/* (this is the allocated size) */
u32 chpInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the ChpInfo struct (below) */
+ /* to the ChpInfo struct (below) */
u32 busInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the BusInfo struct (below) */
+ /* to the BusInfo struct (below) */
u32 devInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the DevInfo array (below) */
+ /* to the DevInfo array (below) */
u8 reserved[104];
} ULTRA_VBUS_HEADERINFO;
diff --git a/drivers/staging/unisys/virtpci/virtpci.c b/drivers/staging/unisys/virtpci/virtpci.c
index d9443a968ddf..97f3d823c688 100644
--- a/drivers/staging/unisys/virtpci/virtpci.c
+++ b/drivers/staging/unisys/virtpci/virtpci.c
@@ -745,7 +745,7 @@ static int virtpci_device_resume(struct device *dev)
/* For a child device just created on a client bus, fill in
* information about the driver that is controlling this device into
- * the the appropriate slot within the vbus channel of the bus
+ * the appropriate slot within the vbus channel of the bus
* instance.
*/
static void fix_vbus_devInfo(struct device *dev, int devNo, int devType,
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index fbc5ebb5f761..c0664ec01fc2 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -411,7 +411,7 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
} else {
/*
* Extract the RELATIVE TARGET PORT IDENTIFIER to identify
- * the Target Port in question for the the incoming
+ * the Target Port in question for the incoming
* SET_TARGET_PORT_GROUPS op.
*/
rtpi = get_unaligned_be16(ptr + 2);
diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h
index ba87d6e731dd..1a4ba247f160 100644
--- a/drivers/thunderbolt/ctl.h
+++ b/drivers/thunderbolt/ctl.h
@@ -44,7 +44,7 @@ struct tb_cfg_result {
* If err = 1 then this is the port that send the
* error.
* If err = 0 and if this was a cfg_read/write then
- * this is the the upstream port of the responding
+ * this is the upstream port of the responding
* switch.
* Otherwise the field is set to zero.
*/
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 6234c75da33f..50294f31f227 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -313,8 +313,7 @@ static const int hrsl_to_error[] = {
/*
* See http://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a
- * reasonable overview of how control transfers use the the IN/OUT
- * tokens.
+ * reasonable overview of how control transfers use the IN/OUT tokens.
*/
#define MAX3421_HXFR_BULK_IN(ep) (0x00 | (ep)) /* bulk or interrupt */
#define MAX3421_HXFR_SETUP 0x10
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index abed30b82905..54674c03d22b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1652,7 +1652,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
- * RExit to a disconnect state). If so, let the the driver know it's
+ * RExit to a disconnect state). If so, let the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED(temp) &&
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 01bf53392819..1b99a08ca2de 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -261,7 +261,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
* Cypress app note that describes this mechanism
- * states the the low-speed part can't handle more
+ * states that the low-speed part can't handle more
* than 800 bytes/sec, in which case 4800 baud is the
* safest speed for a part like that.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index dfd728a263d2..71636a617d89 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -429,7 +429,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
}
/*
- * This is the the common top part of all parallel port callback operations that
+ * This is the common top part of all parallel port callback operations that
* send synchronous messages to the device. This implements convoluted locking
* that avoids two scenarios: (1) a port operation is called after usbserial
* has called our release function, at which point struct mos7715_parport has
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 0677139c6065..d435940d5598 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -46,7 +46,7 @@
*
* ASSUMPTIONS:
*
- * - We use the the as device address the port number where it is
+ * - We use as device address the port number where it is
* connected (port 0 doesn't exist). For unauth, it is 128 + that.
*
* ROADMAP:
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
index b7d4f6b75eef..caa4cb40334d 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/uwb/drp-ie.c
@@ -262,7 +262,7 @@ int uwb_drp_ie_update(struct uwb_rsv *rsv)
* We are given a zone id and the MAS bitmap of bits that need to be set in
* this zone. Note that this zone may already have bits set and this only
* adds settings - we cannot simply assign the MAS bitmap contents to the
- * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * zone contents. We iterate over the bits (MAS) in the zone and set the
* bits that are set in the given MAS bitmap.
*/
static
diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
index d4e7684e7045..501bc08dc125 100644
--- a/drivers/video/fbdev/omap/sossi.c
+++ b/drivers/video/fbdev/omap/sossi.c
@@ -370,7 +370,7 @@ static void sossi_set_bits_per_cycle(int bpc)
int bus_pick_count, bus_pick_width;
/*
- * We set explicitly the the bus_pick_count as well, although
+ * We set explicitly the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
diff --git a/drivers/video/fbdev/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c
index ceb434c95c0d..9177b8056356 100644
--- a/drivers/video/fbdev/sis/sis_accel.c
+++ b/drivers/video/fbdev/sis/sis_accel.c
@@ -215,7 +215,7 @@ SiS310SubsequentScreenToScreenCopy(struct sis_video_info *ivideo, int src_x, int
* and destination blitting areas overlap and
* adapt the bitmap addresses synchronously
* if the coordinates exceed the valid range.
- * The the areas do not overlap, we do our
+ * If the areas do not overlap, we do our
* normal check.
*/
if((mymax - mymin) < height) {
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 5b570b6efa28..ecbd6b7b6c9a 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -507,7 +507,7 @@ static int autofs_dev_ioctl_askumount(struct file *fp,
* located path is the root of a mount we return 1 along with
* the super magic of the mount or 0 otherwise.
*
- * In both cases the the device number (as returned by
+ * In both cases the device number (as returned by
* new_encode_dev()) is also returned.
*/
static int autofs_dev_ioctl_ismountpoint(struct file *fp,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index eea26e1b2fda..8ae32564e6d7 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -849,7 +849,7 @@ int btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace)
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
- * not called and the the filesystem is remounted
+ * not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancelation is wanted.
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index 6528aa662181..6c5ce8e50f32 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -3402,7 +3402,7 @@ verbose_printk("btrfs: process_recorded_refs %llu\n", sctx->cur_ino);
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
- * the the current inum. To handle this case, we create the
+ * than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 1d1ba083ca6e..3d5b414003b3 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2654,7 +2654,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
mutex_unlock(&log_root_tree->log_mutex);
/*
- * nobody else is going to jump in and write the the ctree
+ * nobody else is going to jump in and write the ctree
* super here because the log_commit atomic below is protecting
* us. We must be called with a transaction handle pinning
* the running transaction open, so a full commit can't hop
diff --git a/fs/dcache.c b/fs/dcache.c
index cb25a1a5e307..4a327e47b6b0 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1885,8 +1885,8 @@ EXPORT_SYMBOL(d_obtain_root);
* same inode, only the actual correct case is stored in the dcache for
* case-insensitive filesystems.
*
- * For a case-insensitive lookup match and if the the case-exact dentry
- * already exists in in the dcache, use it and return it.
+ * For a case-insensitive lookup match and if the case-exact dentry
+ * already exists in the dcache, use it and return it.
*
* If no entry exists with the exact case name, allocate new dentry with
* the exact case, and return the spliced entry.
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 4725a07f003c..bcdfbc7568d7 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -900,7 +900,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack {
* @filename: This function kmalloc's the memory for the filename
* @filename_size: This function sets this to the amount of memory
* kmalloc'd for the filename
- * @packet_size: This function sets this to the the number of octets
+ * @packet_size: This function sets this to the number of octets
* in the packet parsed
* @mount_crypt_stat: The mount-wide cryptographic context
* @data: The memory location containing the start of the tag 70
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index d9a17d0b124d..c9c6f2e5a0a0 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -51,7 +51,7 @@ struct ext2_block_alloc_info {
/*
* Was i_next_alloc_goal in ext2_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it is the physical block number of the block which was most-recently
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index bea662bd0ca6..3b94971b7b9b 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -271,7 +271,7 @@ static int ext4_create_inline_data(handle_t *handle,
len = 0;
}
- /* Insert the the xttr entry. */
+ /* Insert the xttr entry. */
i.value = value;
i.value_len = len;
@@ -829,7 +829,7 @@ out:
/*
* Prepare the write for the inline data.
- * If the the data can be written into the inode, we just read
+ * If the data can be written into the inode, we just read
* the page and make it uptodate, and start the journal.
* Otherwise read the page, makes it dirty so that it can be
* handle in writepages(the i_disksize update is left to the
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index ff483257283b..5b3f3135fb0a 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -150,7 +150,7 @@ struct seg_entry {
unsigned short valid_blocks; /* # of valid blocks */
unsigned char *cur_valid_map; /* validity bitmap of blocks */
/*
- * # of valid blocks and the validity bitmap stored in the the last
+ * # of valid blocks and the validity bitmap stored in the last
* checkpoint pack. This information is used by the SSR mode.
*/
unsigned short ckpt_valid_blocks;
diff --git a/fs/kernfs/file.c b/fs/kernfs/file.c
index 4429d6d9217f..2d4e4ef09b73 100644
--- a/fs/kernfs/file.c
+++ b/fs/kernfs/file.c
@@ -259,7 +259,7 @@ static ssize_t kernfs_fop_read(struct file *file, char __user *user_buf,
* There is no easy way for us to know if userspace is only doing a partial
* write, so we don't support them. We expect the entire buffer to come on
* the first write. Hint: if you're writing a value, first read the file,
- * modify only the the value you're changing, then write entire buffer
+ * modify only the value you're changing, then write entire buffer
* back.
*/
static ssize_t kernfs_fop_write(struct file *file, const char __user *user_buf,
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 044013455621..c0aa12bdb106 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -690,7 +690,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb,
/*
* Under certain conditions, the window slide code
* might have reduced the number of bits available or
- * disabled the the local alloc entirely. Re-check
+ * disabled the local alloc entirely. Re-check
* here and return -ENOSPC if necessary.
*/
status = -ENOSPC;
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index 5a6bd5d8779a..85438d16e633 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -71,7 +71,7 @@ xfs_fs_encode_fh(
fileid_type = FILEID_INO32_GEN_PARENT;
/*
- * If the the filesystem may contain 64bit inode numbers, we need
+ * If the filesystem may contain 64bit inode numbers, we need
* to use larger file handles that can represent them.
*
* While we only allocate inodes that do not fit into 32 bits any
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index 26bb55e9e8b6..37cdb83e1e24 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -120,7 +120,7 @@ static inline int drm_rect_height(const struct drm_rect *r)
}
/**
- * drm_rect_visible - determine if the the rectangle is visible
+ * drm_rect_visible - determine if the rectangle is visible
* @r: rectangle whose visibility is returned
*
* RETURNS:
diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h
index d5b5f76d57ef..91c32b80c6d1 100644
--- a/include/linux/mic_bus.h
+++ b/include/linux/mic_bus.h
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ include/linux/virtio.h.
*/
#ifndef _MIC_BUS_H_
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 8981cc882ed2..0b3da6784a66 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -196,7 +196,7 @@ extern pgprot_t protection_map[16];
#define FAULT_FLAG_USER 0x80 /* The fault originated in userspace */
/*
- * vm_fault is filled by the the pagefault handler and passed to the vma's
+ * vm_fault is filled by the pagefault handler and passed to the vma's
* ->fault function. The vma's ->fault is responsible for returning a bitmask
* of VM_FAULT_xxx flags that give details about how the fault was handled.
*
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 494f99e852da..f9f20ca81f51 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -94,7 +94,7 @@ struct kparam_array
* ".") the kernel commandline parameter. Note that - is changed to _, so
* the user can use "foo-bar=1" even for variable "foo_bar".
*
- * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * @perm is 0 if the variable is not to appear in sysfs, or 0444
* for world-readable, 0644 for root-writable, etc. Note that if it
* is writable, you may need to use kparam_block_sysfs_write() around
* accesses (esp. charp, which can be kfreed when it changes).
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index abde271c18ae..51301dc8c0c5 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2697,7 +2697,7 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
* must call this function to return the skb back to the stack, with
* or without a timestamp.
*
- * @skb: clone of the the original outgoing packet
+ * @skb: clone of the original outgoing packet
* @hwtstamps: hardware time stamps, may be NULL if not available
*
*/
diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h
index 94e5ed64dc6d..e9a8d524ab06 100644
--- a/include/net/caif/caif_layer.h
+++ b/include/net/caif/caif_layer.h
@@ -184,7 +184,7 @@ struct cflayer {
* CAIF packet downwards in the stack.
* Packet handling rules:
* - The CAIF packet (cfpkt) ownership is passed to the
- * transmit function. This means that the the packet
+ * transmit function. This means that the packet
* cannot be accessed after passing it to the below
* layer using dn->transmit().
*
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 9bcb220bd4ad..f422729b30c3 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -100,7 +100,7 @@ struct rt6_info {
struct in6_addr rt6i_gateway;
/* Multipath routes:
- * siblings is a list of rt6_info that have the the same metric/weight,
+ * siblings is a list of rt6_info that have the same metric/weight,
* destination, but not the same gateway. nsiblings is just a cache
* to speed up lookup.
*/
diff --git a/include/net/wimax.h b/include/net/wimax.h
index c52b68577cb0..c9705a3eb3b7 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -43,7 +43,7 @@
*
* USAGE
*
- * Embed a `struct wimax_dev` at the beginning of the the device's
+ * Embed a `struct wimax_dev` at the beginning of the device's
* private structure, initialize and register it. For details, see
* `struct wimax_dev`s documentation.
*
diff --git a/include/uapi/asm-generic/fcntl.h b/include/uapi/asm-generic/fcntl.h
index 7543b3e51331..3c8f396825b8 100644
--- a/include/uapi/asm-generic/fcntl.h
+++ b/include/uapi/asm-generic/fcntl.h
@@ -142,7 +142,7 @@
* record locks, but are "owned" by the open file description, not the
* process. This means that they are inherited across fork() like BSD (flock)
* locks, and they are only released automatically when the last reference to
- * the the open file against which they were acquired is put.
+ * the open file against which they were acquired is put.
*/
#define F_OFD_GETLK 36
#define F_OFD_SETLK 37
diff --git a/init/Kconfig b/init/Kconfig
index e84c6423a2e5..19e94edc0ac8 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -848,8 +848,8 @@ config LOG_CPU_MAX_BUF_SHIFT
used as it forces an exact (power of two) size of the ring buffer.
The number of possible CPUs is used for this computation ignoring
- hotplugging making the compuation optimal for the the worst case
- scenerio while allowing a simple algorithm to be used from bootup.
+ hotplugging making the computation optimal for the worst case
+ scenario while allowing a simple algorithm to be used from bootup.
Examples shift values and their meaning:
17 => 128 KB for each CPU
diff --git a/init/main.c b/init/main.c
index bb1aed928f21..ceb26e85e416 100644
--- a/init/main.c
+++ b/init/main.c
@@ -512,7 +512,7 @@ asmlinkage __visible void __init start_kernel(void)
debug_objects_early_init();
/*
- * Set up the the initial canary ASAP:
+ * Set up the initial canary ASAP:
*/
boot_init_stack_canary();
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 9019f15deab2..6e82ca9e2735 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -17,7 +17,7 @@
#ifdef HAVE_JUMP_LABEL
-/* mutex to protect coming/going of the the jump_label table */
+/* mutex to protect coming/going of the jump_label table */
static DEFINE_MUTEX(jump_label_mutex);
void jump_label_lock(void)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 1ce770687ea8..8cd9ce2a6bcc 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2878,7 +2878,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
- * with as many of the the *youngest* kmsg records that fit into it.
+ * with as many of the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
diff --git a/kernel/smp.c b/kernel/smp.c
index aff8aa14f547..c6174667d632 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -622,7 +622,7 @@ EXPORT_SYMBOL(on_each_cpu_mask);
* for all the required CPUs to finish. This may include the local
* processor.
* @cond_func: A callback function that is passed a cpu id and
- * the the info parameter. The function is called
+ * the info parameter. The function is called
* with preemption disabled. The function should
* return a blooean value indicating whether to IPI
* the specified CPU.
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index b38fb2b9e237..612b68cd4599 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2881,7 +2881,7 @@ rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
* This function lets the user discard an event in the ring buffer
* and then that event will not be read later.
*
- * This function only works if it is called before the the item has been
+ * This function only works if it is called before the item has been
* committed. It will try to free the event from the ring buffer
* if another event has not been added behind it.
*
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 1e031f2c9aba..6a76a7f29c3f 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -884,7 +884,7 @@ EXPORT_SYMBOL(bitmap_bitremap);
* read it, you're overqualified for your current job.)
*
* In other words, @orig is mapped onto (surjectively) @dst,
- * using the the map { <n, m> | the n-th bit of @relmap is the
+ * using the map { <n, m> | the n-th bit of @relmap is the
* m-th set bit of @relmap }.
*
* Any set bits in @orig above bit number W, where W is the
diff --git a/lib/dynamic_queue_limits.c b/lib/dynamic_queue_limits.c
index 0777c5a45fa0..2ad6fc394f07 100644
--- a/lib/dynamic_queue_limits.c
+++ b/lib/dynamic_queue_limits.c
@@ -60,7 +60,7 @@ void dql_completed(struct dql *dql, unsigned int count)
* the whole interval (the check above).
*
* If there is slack, the amount of execess data queued above
- * the the amount needed to prevent starvation, the queue limit
+ * the amount needed to prevent starvation, the queue limit
* can be decreased. To avoid hysteresis we consider the
* minimum amount of slack found over several iterations of the
* completion routine.
diff --git a/lib/earlycpio.c b/lib/earlycpio.c
index 3eb3e4722b8e..9d4da0a6a6ed 100644
--- a/lib/earlycpio.c
+++ b/lib/earlycpio.c
@@ -50,7 +50,7 @@ enum cpio_fields {
/**
* cpio_data find_cpio_data - Search for files in an uncompressed cpio
* @path: The directory to search for, including a slash at the end
- * @data: Pointer to the the cpio archive or a header inside
+ * @data: Pointer to the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @nextoff: When a matching file is found, this is the offset from the
* beginning of the cpio to the beginning of the next file, not the
diff --git a/lib/syscall.c b/lib/syscall.c
index e30e03932480..624d80430969 100644
--- a/lib/syscall.c
+++ b/lib/syscall.c
@@ -31,7 +31,7 @@ static int collect_syscall(struct task_struct *target, long *callno,
* @pc: filled with user PC
*
* If @target is blocked in a system call, returns zero with *@callno
- * set to the the call's number and @args filled in with its arguments.
+ * set to the call's number and @args filled in with its arguments.
* Registers not used for system call arguments may not be available and
* it is not kosher to use &struct user_regset calls while the system
* call is still in progress. Note we may get this result if @target
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index eeceeeb09019..fdd76586e1a4 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1308,7 +1308,7 @@ static void return_unused_surplus_pages(struct hstate *h,
* evenly across all nodes with memory. Iterate across these nodes
* until we can no longer free unreserved surplus pages. This occurs
* when the nodes with surplus pages have no free pages.
- * free_pool_huge_page() will balance the the freed pages across the
+ * free_pool_huge_page() will balance the freed pages across the
* on-line nodes with memory and will handle the hstate accounting.
*/
while (nr_pages--) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 18cee0d4c8a2..c9c9b33608f3 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4222,7 +4222,7 @@ static int zone_batchsize(struct zone *zone)
* locking.
*
* Any new users of pcp->batch and pcp->high should ensure they can cope with
- * those fields changing asynchronously (acording the the above rule).
+ * those fields changing asynchronously (according to the above rule).
*
* mutex_is_locked(&pcp_batch_high_lock) required when calling this function
* outside of boot time (or some other assurance that no concurrent updaters
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index faff6247ac8f..9f4c71ba8dd1 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -966,7 +966,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
return 0;
}
-/* Encrypt the the link */
+/* Encrypt the link */
static void hci_conn_encrypt(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 1d9c29a00568..5b2b17522561 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1674,7 +1674,7 @@ static void hci_init3_req(struct hci_request *req, unsigned long opt)
* Delete Stored Link Key command. They are clearly indicating its
* absence in the bit mask of supported commands.
*
- * Check the supported commands and only if the the command is marked
+ * Check the supported commands and only if the command is marked
* as supported send it. If not supported assume that the controller
* does not have actual support for stored link keys which makes this
* command redundant anyway.
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index a88b8524846e..9d83a2e05baf 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1349,7 +1349,7 @@ static void sctp_select_active_and_retran_path(struct sctp_association *asoc)
}
/* We did not find anything useful for a possible retransmission
- * path; either primary path that we found is the the same as
+ * path; either primary path that we found is the same as
* the current one, or we didn't generally find an active one.
*/
if (trans_sec == NULL)
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index 158701da2d31..f0424e16beb7 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -199,7 +199,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3;
max = asoc->frag_point;
- /* If the the peer requested that we authenticate DATA chunks
+ /* If the peer requested that we authenticate DATA chunks
* we need to account for bundling of the AUTH chunks along with
* DATA.
*/
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 6f6b829c9e8e..1ef370a9f675 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -190,7 +190,7 @@ void rpc_destroy_generic_auth(void)
}
/*
- * Test the the current time (now) against the underlying credential key expiry
+ * Test the current time (now) against the underlying credential key expiry
* minus a timeout and setup notification.
*
* The normal case:
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 403078d670a9..b21863009913 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
* @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
* %WIMAX_RF_OFF radio off.
*
- * Reports changes in the software RF switch state to the the WiMAX
+ * Reports changes in the software RF switch state to the WiMAX
* stack.
*
* The main use is during initialization, so the driver can query the
diff --git a/scripts/coccinelle/misc/badty.cocci b/scripts/coccinelle/misc/badty.cocci
index 2fc06fc71927..7bde383f577b 100644
--- a/scripts/coccinelle/misc/badty.cocci
+++ b/scripts/coccinelle/misc/badty.cocci
@@ -3,7 +3,7 @@
//# This makes an effort to find cases where the argument to sizeof is wrong
//# in memory allocation functions by checking the type of the allocated memory
//# when it is a double pointer and ensuring the sizeof argument takes a pointer
-//# to the the memory being allocated. There are false positives in cases the
+//# to the memory being allocated. There are false positives in cases the
//# sizeof argument is not used in constructing the return value. The result
//# may need some reformatting.
//
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index db40fa04cd51..9eb8c74b69a1 100644
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in
kernel/trace/trace_functions.c
The resulted trace is processed into a tree to produce a more human
view of the call stack by drawing textual but hierarchical tree of
-calls. Only the functions's names and the the call time are provided.
+calls. Only the functions's names and the call time are provided.
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
index 3064c6ced87c..7b9769e7985a 100644
--- a/security/apparmor/context.c
+++ b/security/apparmor/context.c
@@ -13,7 +13,7 @@
* License.
*
*
- * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * AppArmor sets confinement on every task, via the aa_task_cxt and
* the aa_task_cxt.profile, both of which are required and are not allowed
* to be NULL. The aa_task_cxt is not reference counted and is unique
* to each cred (which is reference count). The profile pointed to by
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index e26f860e5f2e..112d40974504 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -474,7 +474,7 @@ error:
* keyring, otherwise replace the link to the matching key with a link to the
* new key.
*
- * The key must grant the caller Link permission and the the keyring must grant
+ * The key must grant the caller Link permission and the keyring must grant
* the caller Write permission. Furthermore, if an additional link is created,
* the keyring's quota will be extended.
*
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index ec6a7d0d1886..e3ecc7538f8e 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -5110,7 +5110,7 @@ EXPORT_SYMBOL_GPL(snd_hda_power_save);
* @nid: NID to check / update
*
* Check whether the given NID is in the amp list. If it's in the list,
- * check the current AMP status, and update the the power-status according
+ * check the current AMP status, and update the power-status according
* to the mute status.
*
* This function is supposed to be set or called from the check_power_status
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 98cd1908c039..f193b73de0f2 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -887,7 +887,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec,
static struct snd_kcontrol_new beep_vol_ctl =
HDA_CODEC_VOLUME(NULL, 0, 0, 0);
- /* check for mute support for the the amp */
+ /* check for mute support for the amp */
if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
const struct snd_kcontrol_new *temp;
if (spec->anabeep_nid == nid)
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index f3b491aa3e22..df5cb3b4b6e2 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -31,7 +31,7 @@
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
- * sampling rate. That means the the FPGA doubles the
+ * sampling rate. That means that the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index bddee30a4bc7..eaac777ee91d 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -694,7 +694,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int source)
u64 Kpart;
unsigned int K, Ndiv, Nmod, target;
- /* The the PLL output is always 98.304MHz. */
+ /* The PLL output is always 98.304MHz. */
target = 98304000;
/* If the input frequency is over 14.4MHz then scale it down. */
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index a609aafc994d..3c1c7b71e69b 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -164,7 +164,7 @@ static void fsl_dma_abort_stream(struct snd_pcm_substream *substream)
/**
* fsl_dma_update_pointers - update LD pointers to point to the next period
*
- * As each period is completed, this function changes the the link
+ * As each period is completed, this function changes the link
* descriptor pointers for that period to point to the next period.
*/
static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private)
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index b2c3d0d5dca3..8dc8cc9b8348 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -615,7 +615,7 @@ A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. The DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index b3b8abae62b8..6acad619044b 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -196,7 +196,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
- period being the hist entry period value
- - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option
+ - WEIGHT-A/WEIGHT-B being user suplied weights in the '-c' option
behind ':' separator like '-c wdiff:1,2'.
- WIEGHT-A being the weight of the data file
- WIEGHT-B being the weight of the baseline data file
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index 56bfb523c5bb..6940d8849434 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -35,9 +35,9 @@ The \fB-c MSR#\fP option includes the delta of the specified 32-bit MSR counter.
.PP
The \fB-C MSR#\fP option includes the delta of the specified 64-bit MSR counter.
.PP
-The \fB-m MSR#\fP option includes the the specified 32-bit MSR value.
+The \fB-m MSR#\fP option includes the specified 32-bit MSR value.
.PP
-The \fB-M MSR#\fP option includes the the specified 64-bit MSR value.
+The \fB-M MSR#\fP option includes the specified 64-bit MSR value.
.PP
The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
The default is 5 seconds.
diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
index fd7e9e9d6f4a..1aa7faa0e0e0 100644
--- a/tools/thermal/tmon/pid.c
+++ b/tools/thermal/tmon/pid.c
@@ -38,7 +38,7 @@
/**************************************************************************
* PID (Proportional-Integral-Derivative) controller is commonly used in
- * linear control system, consider the the process.
+ * linear control system, consider the process.
* G(s) = U(s)/E(s)
* kp = proportional gain
* ki = integral gain
--
1.9.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-02 20:15 ` Michael Opdenacker
@ 2014-10-02 22:37 ` Eduardo Valentin
2014-10-16 12:35 ` Michael Opdenacker
0 siblings, 1 reply; 35+ messages in thread
From: Eduardo Valentin @ 2014-10-02 22:37 UTC (permalink / raw)
To: Michael Opdenacker
Cc: rdunlap, trivial, joe, akpm, arend, gregkh, linux-kernel
On Thu, Oct 02, 2014 at 10:15:03PM +0200, Michael Opdenacker wrote:
> Fix all occurrences of "the the ", and occasionally "in in ",
> in the source code, comments and documentation.
>
> The replacement couldn't be automated because sometimes
> the first "the" was meant to be another word.
>
> Example: "according the the"
> meaning: "according to the"
>
> Note that I sometimes took the opportunity to fix
> other spelling issues or typos in the same sentences,
> and to reformat some comments impacted by the changes.
>
> I also fixed a few checkpatch errors in the same
> lines, but not all of them (should be addressed by
> separate patches).
>
> Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
> Reviewed-by: rdunlap@infradead.org
> ---
<cut>
> tools/thermal/tmon/pid.c | 2 +-
> 225 files changed, 266 insertions(+), 266 deletions(-)
>
<big cut>
> diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
> index fd7e9e9d6f4a..1aa7faa0e0e0 100644
> --- a/tools/thermal/tmon/pid.c
> +++ b/tools/thermal/tmon/pid.c
> @@ -38,7 +38,7 @@
>
> /**************************************************************************
> * PID (Proportional-Integral-Derivative) controller is commonly used in
> - * linear control system, consider the the process.
> + * linear control system, consider the process.
On Tmon behalf:
Acked-by: Eduardo Valentin <edubezval@gmail.com>
> * G(s) = U(s)/E(s)
> * kp = proportional gain
> * ki = integral gain
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-02 22:37 ` Eduardo Valentin
@ 2014-10-16 12:35 ` Michael Opdenacker
2014-10-16 12:39 ` Michael Opdenacker
2014-10-16 19:38 ` Michael Opdenacker
0 siblings, 2 replies; 35+ messages in thread
From: Michael Opdenacker @ 2014-10-16 12:35 UTC (permalink / raw)
To: trivial; +Cc: Eduardo Valentin, rdunlap, joe, akpm, arend, gregkh, linux-kernel
Greetings,
On 10/03/2014 12:37 AM, Eduardo Valentin wrote:
>
> On Tmon behalf:
>
> Acked-by: Eduardo Valentin <edubezval@gmail.com>
Any chance to get this perged before the end of the current merge window
(Linus said it would last until sometime next week)? I'm posting a new
update with fixes for new issues that accumulated... Otherwise, there
will be even more the next time, and current reviews may get obsolete.
And I'd also hate to have to send commits to individual maintainers,
polluting the history tree with loads of commits for the same trivial
change...
Cheers,
Michael.
--
Michael Opdenacker, CEO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
+33 484 258 098
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-16 12:35 ` Michael Opdenacker
@ 2014-10-16 12:39 ` Michael Opdenacker
2014-10-16 19:38 ` Michael Opdenacker
1 sibling, 0 replies; 35+ messages in thread
From: Michael Opdenacker @ 2014-10-16 12:39 UTC (permalink / raw)
To: edubezval, rdunlap, joe, akpm, arend, gregkh
Cc: linux-kernel, Michael Opdenacker
Fix all occurrences of "the the ", and occasionally "in in ",
in the source code, comments and documentation.
The replacement couldn't be automated because sometimes
the first "the" was meant to be another word.
Example: "according the the"
meaning: "according to the"
Note that I sometimes took the opportunity to fix
other spelling issues or typos in the same sentences,
and to reformat some comments impacted by the changes.
I also fixed a few checkpatch errors in the same
lines, but not all of them (should be addressed by
separate patches).
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Reviewed-by: rdunlap@infradead.org
Acked-by: Eduardo Valentin <edubezval@gmail.com>
---
Documentation/ABI/testing/sysfs-class-cxl | 4 ++--
Documentation/ABI/testing/sysfs-devices-memory | 2 +-
Documentation/DocBook/media/v4l/controls.xml | 2 +-
Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
Documentation/devicetree/bindings/arm/msm/timer.txt | 2 +-
.../devicetree/bindings/ata/cavium-compact-flash.txt | 2 +-
Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt | 2 +-
Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt | 2 +-
Documentation/devicetree/bindings/mtd/fsmc-nand.txt | 2 +-
.../devicetree/bindings/net/broadcom-systemport.txt | 2 +-
.../devicetree/bindings/power/rockchip-io-domain.txt | 2 +-
Documentation/filesystems/autofs4-mount-control.txt | 4 ++--
Documentation/phy.txt | 2 +-
Documentation/vm/unevictable-lru.txt | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/unwind.h | 2 +-
arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
arch/arm/mach-pxa/stargate2.c | 2 +-
arch/arm64/crypto/aes-neon.S | 2 +-
arch/blackfin/mach-common/entry.S | 2 +-
arch/c6x/platforms/cache.c | 2 +-
arch/ia64/include/asm/spinlock.h | 2 +-
arch/ia64/include/asm/uv/uv_hub.h | 2 +-
arch/m68k/coldfire/intc-2.c | 2 +-
arch/metag/kernel/process.c | 2 +-
arch/microblaze/kernel/entry.S | 2 +-
arch/mips/alchemy/devboards/pm.c | 2 +-
arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
arch/mips/include/asm/spinlock.h | 2 +-
arch/mips/kvm/mips.c | 2 +-
arch/mips/mm/c-octeon.c | 4 ++--
arch/mips/netlogic/xlr/fmn.c | 2 +-
arch/powerpc/include/asm/cache.h | 2 +-
arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
arch/powerpc/kernel/head_64.S | 2 +-
arch/powerpc/mm/gup.c | 2 +-
arch/powerpc/mm/hugetlbpage.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/platforms/chrp/setup.c | 2 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
arch/s390/kernel/perf_cpum_sf.c | 2 +-
arch/s390/mm/gup.c | 2 +-
arch/sparc/kernel/pci.c | 2 +-
arch/sparc/mm/gup.c | 2 +-
arch/tile/include/asm/irqflags.h | 2 +-
arch/tile/include/gxio/trio.h | 2 +-
arch/tile/kernel/single_step.c | 2 +-
arch/x86/include/asm/spinlock.h | 2 +-
arch/x86/include/asm/uv/uv_hub.h | 2 +-
arch/x86/kvm/x86.c | 2 +-
arch/x86/mm/gup.c | 4 ++--
arch/x86/xen/setup.c | 2 +-
arch/xtensa/include/asm/initialize_mmu.h | 2 +-
arch/xtensa/kernel/entry.S | 12 ++++++------
crypto/asymmetric_keys/pkcs7_parser.h | 2 +-
drivers/acpi/acpica/accommon.h | 2 +-
drivers/acpi/acpica/tbfadt.c | 2 +-
drivers/char/apm-emulation.c | 2 +-
drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
drivers/cpuidle/driver.c | 2 +-
drivers/crypto/picoxcell_crypto.c | 2 +-
drivers/crypto/ux500/hash/hash_core.c | 2 +-
drivers/gpio/gpio-ich.c | 2 +-
drivers/gpio/gpio-sch.c | 4 ++--
drivers/gpu/drm/drm_mm.c | 4 ++--
drivers/gpu/drm/i915/i915_gem.c | 2 +-
drivers/gpu/drm/i915/i915_gem_userptr.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 4 ++--
drivers/gpu/drm/radeon/atombios.h | 4 ++--
drivers/gpu/drm/radeon/r300_reg.h | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 2 +-
drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
drivers/gpu/drm/radeon/radeon_vm.c | 4 ++--
drivers/hv/channel.c | 4 ++--
drivers/hv/vmbus_drv.c | 4 ++--
drivers/hwmon/pmbus/ucd9200.c | 2 +-
drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
drivers/infiniband/hw/qib/qib.h | 2 +-
drivers/input/mouse/gpio_mouse.c | 2 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
drivers/lguest/core.c | 2 +-
drivers/media/dvb-frontends/tda1002x.h | 2 +-
drivers/media/dvb-frontends/tda10048.c | 2 +-
drivers/media/pci/cx88/cx88-dsp.c | 2 +-
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/saa7164/saa7164-core.c | 2 +-
drivers/media/platform/davinci/vpbe.c | 2 +-
drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
drivers/media/usb/dvb-usb/friio.c | 2 +-
drivers/media/usb/dvb-usb/friio.h | 2 +-
drivers/media/usb/gspca/finepix.c | 2 +-
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 2 +-
drivers/memory/emif.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/mfd/db8500-prcmu.c | 2 +-
drivers/misc/mic/bus/mic_bus.c | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/ubi/ubi.h | 4 ++--
drivers/mtd/ubi/wl.c | 2 +-
drivers/net/can/xilinx_can.c | 2 +-
drivers/net/ethernet/agere/et131x.c | 2 +-
drivers/net/ethernet/calxeda/xgmac.c | 2 +-
drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
drivers/net/ethernet/intel/fm10k/fm10k_mbx.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
drivers/net/wimax/i2400m/i2400m.h | 4 ++--
drivers/net/wimax/i2400m/rx.c | 2 +-
drivers/net/wimax/i2400m/tx.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/wcn36xx/hal.h | 8 ++++----
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++--
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 ++--
drivers/net/wireless/mwifiex/debugfs.c | 2 +-
drivers/net/wireless/rsi/rsi_91x_sdio.c | 4 ++--
drivers/net/wireless/ti/wl1251/acx.h | 2 +-
drivers/of/base.c | 2 +-
drivers/pci/hotplug/acpiphp_glue.c | 2 +-
drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 2 +-
drivers/pinctrl/pinctrl-at91.c | 2 +-
drivers/power/power_supply_sysfs.c | 5 +++--
drivers/rtc/rtc-rs5c372.c | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 6 +++---
drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++--
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/remote_device.h | 2 +-
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/spi/spi-ppc4xx.c | 2 +-
drivers/staging/android/ion/ion.c | 2 +-
drivers/staging/android/uapi/binder.h | 2 +-
drivers/staging/comedi/drivers/amplc_pci230.c | 2 +-
drivers/staging/lustre/lustre/llite/file.c | 2 +-
drivers/staging/lustre/lustre/ptlrpc/pinger.c | 2 +-
drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/rtl8712/rtl871x_cmd.c | 2 +-
drivers/staging/rtl8723au/core/rtw_cmd.c | 2 +-
.../staging/unisys/common-spar/include/channels/iochannel.h | 4 ++--
.../unisys/common-spar/include/channels/vbuschannel.h | 6 +++---
drivers/staging/unisys/virtpci/virtpci.c | 2 +-
drivers/target/target_core_alua.c | 2 +-
drivers/thunderbolt/ctl.h | 2 +-
drivers/usb/host/max3421-hcd.c | 3 +--
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/mos7720.c | 2 +-
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/uwb/drp-ie.c | 2 +-
drivers/video/fbdev/omap/sossi.c | 2 +-
drivers/video/fbdev/sis/sis_accel.c | 2 +-
fs/autofs4/dev-ioctl.c | 2 +-
fs/btrfs/dev-replace.c | 2 +-
fs/btrfs/send.c | 2 +-
fs/btrfs/tree-log.c | 2 +-
fs/dcache.c | 4 ++--
fs/ecryptfs/keystore.c | 2 +-
fs/ext2/ext2.h | 2 +-
fs/ext4/inline.c | 4 ++--
fs/f2fs/segment.h | 2 +-
fs/kernfs/file.c | 2 +-
fs/ocfs2/localalloc.c | 2 +-
fs/xfs/xfs_export.c | 2 +-
include/drm/drm_rect.h | 2 +-
include/linux/mic_bus.h | 2 +-
include/linux/mm.h | 2 +-
include/linux/moduleparam.h | 2 +-
include/linux/skbuff.h | 2 +-
include/net/caif/caif_layer.h | 2 +-
include/net/ip6_fib.h | 2 +-
include/net/wimax.h | 2 +-
include/uapi/asm-generic/fcntl.h | 2 +-
init/Kconfig | 4 ++--
init/main.c | 2 +-
kernel/jump_label.c | 2 +-
kernel/printk/printk.c | 2 +-
kernel/smp.c | 2 +-
kernel/trace/ring_buffer.c | 2 +-
lib/dynamic_queue_limits.c | 2 +-
lib/earlycpio.c | 2 +-
lib/syscall.c | 2 +-
mm/hugetlb.c | 2 +-
mm/page_alloc.c | 2 +-
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/hci_core.c | 2 +-
net/ethernet/eth.c | 2 +-
net/sctp/associola.c | 2 +-
net/sctp/chunk.c | 2 +-
net/sunrpc/auth_generic.c | 2 +-
net/wimax/op-rfkill.c | 2 +-
scripts/coccinelle/misc/badty.cocci | 2 +-
scripts/tracing/draw_functrace.py | 2 +-
security/apparmor/context.c | 2 +-
security/keys/keyctl.c | 2 +-
sound/pci/hda/hda_codec.c | 2 +-
sound/pci/hda/patch_sigmatel.c | 2 +-
sound/pci/ice1712/prodigy192.c | 2 +-
sound/soc/codecs/wm9713.c | 2 +-
sound/soc/fsl/fsl_dma.c | 2 +-
sound/sparc/dbri.c | 2 +-
tools/perf/Documentation/perf-diff.txt | 2 +-
tools/power/x86/turbostat/turbostat.8 | 4 ++--
tools/thermal/tmon/pid.c | 2 +-
229 files changed, 271 insertions(+), 271 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index 554405ec1955..9d5902e9d674 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -71,8 +71,8 @@ What: /sys/class/cxl/<afu>/api_version_com
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
- Decimal value of the the lowest version of the userspace API
- this this kernel supports.
+ Decimal value of the lowest version of the userspace API
+ this kernel supports.
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index deef3b5723cf..9767745b99bd 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -45,7 +45,7 @@ Description:
The file /sys/devices/system/memory/memoryX/state
is read-write. When read, its contents show the
online/offline state of the memory section. When written,
- root can toggle the the online/offline state of a removable
+ root can toggle the online/offline state of a removable
memory section (see removable file description above)
using the following commands.
# echo online > /sys/devices/system/memory/memoryX/state
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index e013e4bf244c..324efa8042f9 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3415,7 +3415,7 @@ giving priority to the center of the metered area.</entry>
<row>
<entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant> </entry>
<entry>A multi-zone metering. The light intensity is measured
-in several points of the frame and the the results are combined. The
+in several points of the frame and the results are combined. The
algorithm of the zones selection and their significance in calculating the
final value is device dependent.</entry>
</row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
index f4e28e7d4751..721728745407 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
@@ -267,7 +267,7 @@ is intended for still imaging applications. The idea is to get the
best possible image quality that the hardware can deliver. It is not
defined how the driver writer may achieve that; it will depend on the
hardware and the ingenuity of the driver writer. High quality mode is
-a different mode from the the regular motion video capture modes. In
+a different mode from the regular motion video capture modes. In
high quality mode:<itemizedlist>
<listitem>
<para>The driver may be able to capture higher
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
index c6ef8f13dc7e..74607b6c1117 100644
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -8,7 +8,7 @@ Properties:
"qcom,kpss-timer" - krait subsystem
"qcom,scss-timer" - scorpion subsystem
-- interrupts : Interrupts for the the debug timer, the first general purpose
+- interrupts : Interrupts for the debug timer, the first general purpose
timer, and optionally a second general purpose timer in that
order.
diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
index 93986a5a8018..3bacc8e0931e 100644
--- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
+++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -9,7 +9,7 @@ Properties:
Compatibility with many Cavium evaluation boards.
-- reg: The base address of the the CF chip select banks. Depending on
+- reg: The base address of the CF chip select banks. Depending on
the device configuration, there may be one or two banks.
- cavium,bus-width: The width of the connection to the CF devices. Valid
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
index d63194a2c848..ada4e2973323 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
@@ -39,7 +39,7 @@ Optional Properties:
- lines-initial-states: Bitmask that specifies the initial state of each
line. When a bit is set to zero, the corresponding line will be initialized to
the input (pulled-up) state. When the bit is set to one, the line will be
- initialized the the low-level output state. If the property is not specified
+ initialized the low-level output state. If the property is not specified
all lines will be initialized to the input state.
The I/O expander can detect input state changes, and thus optionally act as
diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
index d9ee909d2b78..d71258e2d456 100644
--- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
@@ -59,7 +59,7 @@ Optional properties:
Each child node represents one channel and has the following
properties:
Required properties:
- * reg: Pair of pins the the channel is connected to.
+ * reg: Pair of pins the channel is connected to.
0: VP/VN
1: VAUXP[0]/VAUXN[0]
2: VAUXP[1]/VAUXN[1]
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index ec42935f3908..5235cbc551b0 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -9,7 +9,7 @@ Required properties:
Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width
defaults to 1 byte
-- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+- nand-skip-bbtscan: Indicates the BBT scanning should be skipped
- timings: array of 6 bytes for NAND timings. The meanings of these bytes
are:
byte 0 TCLR : CLE to RE delay in number of AHB clock cycles, only 4 bits
diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
index aa7ad622259d..877da34145b0 100644
--- a/Documentation/devicetree/bindings/net/broadcom-systemport.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
@@ -3,7 +3,7 @@
Required properties:
- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the the rx
+- interrupts: interrupts for the device, first cell must be for the rx
interrupts, and the second cell should be for the transmit queues. An
optional third interrupt cell for Wake-on-LAN can be specified
- local-mac-address: Ethernet MAC address (48 bits) of this adapter
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
index 6fbf6e7ecde6..4679bde972c6 100644
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
@@ -37,7 +37,7 @@ Required properties:
You specify supplies using the standard regulator bindings by including
-a phandle the the relevant regulator. All specified supplies must be able
+a phandle to the relevant regulator. All specified supplies must be able
to report their voltage. The IO Voltage Domain for any non-specified
supplies will be not be touched.
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index aff22113a986..e54896427b4a 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -373,7 +373,7 @@ variation uses the path and optionally arg1 set to an autofs mount type.
The call returns 1 if this is a mount point and sets arg1 to the device
number of the mount and field arg2 to the relevant super block magic
number (described below) or 0 if it isn't a mountpoint. In both cases
-the the device number (as returned by new_encode_dev()) is returned
+the device number (as returned by new_encode_dev()) is returned
in field arg1.
If supplied with a file descriptor we're looking for a specific mount,
@@ -387,7 +387,7 @@ is one or 0 if it isn't a mountpoint.
If a path is supplied (and the ioctlfd field is set to -1) then the path
is looked up and is checked to see if it is the root of a mount. If a
type is also given we are looking for a particular autofs mount and if
-a match isn't found a fail is returned. If the the located path is the
+a match isn't found a fail is returned. If the located path is the
root of a mount 1 is returned along with the super magic of the mount
or 0 otherwise.
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index c6594af94d25..27fb3656ec8e 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -87,7 +87,7 @@ should contain the phy name as given in the dt data and in the case of
non-dt boot, it should contain the label of the PHY. The two
devm_phy_get associates the device with the PHY using devres on
successful PHY get. On driver detach, release function is invoked on
-the the devres data and devres data is freed. phy_optional_get and
+the devres data and devres data is freed. phy_optional_get and
devm_phy_optional_get should be used when the phy is optional. These
two functions will never return -ENODEV, but instead returns NULL when
the phy cannot be found.
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index 744f82f86c58..441dd2266531 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -453,7 +453,7 @@ putback_lru_page() function to add migrated pages back to the LRU.
mmap(MAP_LOCKED) SYSTEM CALL HANDLING
-------------------------------------
-In addition the mlock()/mlockall() system calls, an application can request
+In addition to the mlock()/mlockall() system calls, an application can request
that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 89c4b5ccc68d..da43a1704033 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1930,7 +1930,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
+ appended to the device tree bootargs property.
endchoice
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index d1c3f3a71c94..4f697edd0bad 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -22,7 +22,7 @@
#ifndef __ASSEMBLY__
-/* Unwind reason code according the the ARM EABI documents */
+/* Unwind reason code according to the ARM EABI documents */
enum unwind_reason_code {
URC_OK = 0, /* operation completed successfully */
URC_CONTINUE_UNWIND = 8,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 716247ed9e0c..b1479ce8b4f1 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -753,7 +753,7 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
}
/**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * _init_main_clk - get a struct clk * for the hwmod's main functional clk
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
@@ -791,7 +791,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
}
/**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
@@ -835,7 +835,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
}
/**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 01de542432a6..6f92e75b6c35 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -423,7 +423,7 @@ static void __init imote2_stargate2_init(void)
}
#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
+/* As the imote2 doesn't currently have a conventional SD slot
* there is no option to hotplug cards, making all this rather simple
*/
static int imote2_mci_get_ro(struct device *dev)
diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S
index b93170e1cc93..d0f01cff23b3 100644
--- a/arch/arm64/crypto/aes-neon.S
+++ b/arch/arm64/crypto/aes-neon.S
@@ -47,7 +47,7 @@
prepare .LReverse_Sbox, .LReverse_ShiftRows, \temp
.endm
- /* apply SubBytes transformation using the the preloaded Sbox */
+ /* apply SubBytes transformation using the preloaded Sbox */
.macro sub_bytes, in
sub v9.16b, \in\().16b, v12.16b
tbl \in\().16b, {v16.16b-v19.16b}, \in\().16b
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 86b5a095c5a1..9c8612385e00 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -480,7 +480,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
#ifdef CONFIG_EXACT_HWERR
/* Make sure all pending read/writes complete. This will ensure any
* accesses which could cause hardware errors completes, and signal
- * the the hardware before we do something silly, like crash the
+ * the hardware before we do something silly, like crash the
* kernel. We don't need to work around anomaly 05000312, since
* we are already atomic
*/
diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c
index 86318a16a252..dc21f94aaaaf 100644
--- a/arch/c6x/platforms/cache.c
+++ b/arch/c6x/platforms/cache.c
@@ -437,7 +437,7 @@ void __init c6x_cache_init(void)
if (!cache_base)
return;
- /* Set L2 caches on the the whole L2 SRAM memory */
+ /* Set L2 caches on the whole L2 SRAM memory */
L2_cache_set_mode(L2MODE_SIZE);
/* Enable L1 */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 45698cd15b7b..bd6ea40f3ef9 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -23,7 +23,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
* The pad bits in the middle are used to prevent the next_ticket number
* overflowing into the now_serving number.
*
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index 2a88c7204e52..809ddb6896db 100644
--- a/arch/ia64/include/asm/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -257,7 +257,7 @@ static inline int uv_numa_blade_id(void)
return 0;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return 0;
diff --git a/arch/m68k/coldfire/intc-2.c b/arch/m68k/coldfire/intc-2.c
index 995093357c59..f74f0e473119 100644
--- a/arch/m68k/coldfire/intc-2.c
+++ b/arch/m68k/coldfire/intc-2.c
@@ -7,7 +7,7 @@
* family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
* controllers, and the 547x and 548x families which have only one of them.
*
- * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * The external 7 fixed interrupts are part of the Edge Port unit of these
* ColdFire parts. They can be configured as level or edge triggered.
*
* (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff986a23..30052da1f1a4 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -211,7 +211,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
/*
* Get a pointer to where the new child's register block should have
* been pushed.
- * The Meta's stack grows upwards, and the context is the the first
+ * The Meta's stack grows upwards, and the context is the first
* thing to be pushed by TBX (phew)
*/
*childregs = *current_pt_regs();
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 0536bc021cc6..b417be09196d 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -445,7 +445,7 @@ TRAP_return: /* Make global symbol for debugging */
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look like the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index bfeb8f3c0be6..203767dbeb64 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -16,7 +16,7 @@
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
* is to trigger a wakeup.
*/
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index df69bfd2b006..4ec669f5b0d4 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index)
* offsetof() to determine the offsets into packet headers.
* For example, offsetof(ethhdr, protocol) returns the offset
* of the ethernet protocol field. The bitmask selects which
- * bytes to include the the tag, with bit offset X selecting
+ * bytes to include in the tag, with bit offset X selecting
* byte at offset X from the beginning of the packet data.
* @len: Number of bytes to include. Usually this is the sizeof()
* the field.
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index 78d201fb6c87..b6f41f6b6c70 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -31,7 +31,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*/
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index e3b21e51ff7e..56e68844d90c 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -1153,7 +1153,7 @@ int __init kvm_mips_init(void)
* requires TLBs. The TLB handling code is statically linked with
* the rest of the kernel (tlb.c) to avoid the possibility of
* double faulting. The issue is that the TLB code references
- * routines that are part of the the KVM module, which are only
+ * routines that are part of the KVM module, which are only
* available once the module is loaded.
*/
kvm_mips_gfn_to_pfn = gfn_to_pfn;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 05b1d7cf9514..1647426364b9 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -350,7 +350,7 @@ static void co_cache_error_call_notifiers(unsigned long val)
}
/*
- * Called when the the exception is recoverable
+ * Called when the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -359,7 +359,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
}
/**
- * Called when the the exception is not recoverable
+ * Called when the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d428e8471eec..1d1eb1e10ae2 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -144,7 +144,7 @@ void xlr_percpu_fmn_init(void)
* For sending FMN messages, we need credits on the destination
* bucket. Program the credits this core has on the 128 possible
* destination buckets.
- * We cannot use a loop here, because the the first argument has
+ * We cannot use a loop here, because the first argument has
* to be a constant integer value.
*/
COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 34a05a1a990b..af6f17b32531 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -52,7 +52,7 @@ static inline void logmpp(u64 x)
/*
* For a snooping icache, we still need a dummy icbi to purge all the
* prefetched instructions from the ifetch buffers. We also need a sync
- * before the icbi to order the the actual stores to memory that might
+ * before the icbi to order the actual stores to memory that might
* have modified instructions with the icbi.
*/
#define PURGE_PREFETCHED_INS \
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index 334459ad145b..b3219b0ca2c4 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -246,7 +246,7 @@ static inline unsigned int ev_int_get_mask(unsigned int interrupt,
* ev_int_eoi - signal the end of interrupt processing
* @interrupt: the interrupt number
*
- * This function signals the end of processing for the the specified
+ * This function signals the end of processing for the specified
* interrupt, which must be the interrupt currently in service. By
* definition, this is also the highest-priority interrupt.
*
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index ac6432d9be46..a18702780733 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -30,7 +30,7 @@ struct arch_hw_breakpoint {
u16 len; /* length of the target data symbol */
};
-/* Note: Don't change the the first 6 bits below as they are in the same order
+/* Note: Don't change the first 6 bits below as they are in the same order
* as the dabr and dabrx.
*/
#define HW_BRK_TYPE_READ 0x01
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index d48125d0c048..01ecece4ca83 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -94,7 +94,7 @@ __secondary_hold_acknowledge:
#ifdef CONFIG_RELOCATABLE
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
- * is used by kexec-tools to keep the the kdump kernel in the
+ * is used by kexec-tools to keep the kdump kernel in the
* crash_kernel region. The loader is responsible for
* observing the alignment requirement.
*/
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index d8746684f606..a97b81d5cfa6 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -168,7 +168,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on powerpc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 7e70ae968e5f..bf66090de7cc 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -933,7 +933,7 @@ void flush_dcache_icache_hugepage(struct page *page)
* (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table
*
* So long as we atomically load page table pointers we are safe against teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 692998244d2c..a2ce00831362 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -9,7 +9,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * This file is a driver for the the General Purpose Timer (gpt) devices
+ * This file is a driver for the General Purpose Timer (gpt) devices
* found on the MPC5200 SoC. Each timer has an IO pin which can be used
* for GPIO or can be used to raise interrupts. The timer function can
* be used independently from the IO pin, or it can be used to control
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 5b77b1919fd2..b6281b22d9b7 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -251,7 +251,7 @@ static void briq_restart(char *cmd)
* Per default, input/output-device points to the keyboard/screen
* If no card is installed, the built-in serial port is used as a fallback.
* But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
- * the the built-in serial node. Instead, a /failsafe node is created.
+ * to the built-in serial node. Instead, a /failsafe node is created.
*/
static void chrp_init_early(void)
{
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 468a0f23c7f2..09f4e2caf18f 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1602,7 +1602,7 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
/*
* This function is supposed to be called on basis of PE from top
- * to bottom style. So the the I/O or MMIO segment assigned to
+ * to bottom style. So the I/O or MMIO segment assigned to
* parent PE could be overrided by its child PEs if necessary.
*/
static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index 08e761318c17..8bedb3c6211b 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1128,7 +1128,7 @@ static void debug_sample_entry(struct hws_combined_entry *sample,
* combined-sampling data entry consists of a basic- and a diagnostic-sampling
* data entry. The sampling function is determined by the flags in the perf
* event hardware structure. The function always works with a combined-sampling
- * data entry but ignores the the diagnostic portion if it is not available.
+ * data entry but ignores the diagnostic portion if it is not available.
*
* Note that the implementation focuses on basic-sampling data entries and, if
* such an entry is not valid, the entire combined-sampling data entry is
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 639fce464008..2f03d7badf95 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -187,7 +187,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* prevent the pagetables from being freed on s390.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f49478..ef36086d3db1 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -306,7 +306,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
+ * firmware can sample the value before the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index 1aed0432c64b..74ed2d607036 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -189,7 +189,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on sparc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_disable();
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 60d62a292fce..a9554b167e96 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -116,7 +116,7 @@
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
* Likewise, INTCTRL_K is removed and re-added during device
- * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * interrupts, as is the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
* to know our current state.
diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h
index df10a662cc25..50a3d5cbad20 100644
--- a/arch/tile/include/gxio/trio.h
+++ b/arch/tile/include/gxio/trio.h
@@ -206,7 +206,7 @@ typedef struct {
/* Initialize a TRIO context.
*
* This function allocates a TRIO "service domain" and maps the MMIO
- * registers into the the caller's VA space.
+ * registers into the caller's VA space.
*
* @param trio_index Which TRIO shim; Gx36 must pass 0.
* @param context Context object to be initialized.
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index 6cb2ce31b5a2..4a75a6be8fa0 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -277,7 +277,7 @@ P("\n");
/*
* Called after execve() has started the new image. This allows us
- * to reset the info state. Note that the the mmap'ed memory, if there
+ * to reset the info state. Note that the mmap'ed memory, if there
* was any, has already been unmapped by the exec.
*/
void single_step_execve(void)
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index 9295016485c9..78a40082f654 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -71,7 +71,7 @@ static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*
* We use an xadd covering *both* parts of the lock, to increment the tail and
* also load the position of the head, which takes care of memory ordering
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index a00ad8f2a657..3260b75fd427 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -512,7 +512,7 @@ static inline int uv_numa_blade_id(void)
return uv_hub_info->numa_blade_id;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return uv_cpu_to_blade[cpu];
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 34c8f94331f8..3f52b5743ee5 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7294,7 +7294,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
if (current->mm == kvm->mm) {
/*
* Free memory regions allocated on behalf of userspace,
- * unless the the memory map has changed due to process exit
+ * unless the memory map has changed due to process exit
* or fd copying.
*/
struct kvm_userspace_memory_region mem;
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 207d9aef662d..a1f84cebb9aa 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -288,7 +288,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
@@ -360,7 +360,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_disable();
pgdp = pgd_offset(mm, addr);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index af7216128d93..b2ab7e9dd3f1 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -686,7 +686,7 @@ char * __init xen_memory_setup(void)
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
- * We tried to make the the memblock_reserve more selective so
+ * We tried to make the memblock_reserve more selective so
* that it would be clear what region is reserved. Sadly we ran
* in the problem wherein on a 64-bit hypervisor with a 32-bit
* initial domain, the pt_base has the cr3 value which is not
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 600781edc8a3..2e1d20d0b71f 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -6,7 +6,7 @@
* For the new V3 MMU we remap the TLB from virtual == physical
* to the standard Linux mapping used in earlier MMU's.
*
- * The the MMU we also support a new configuration register that
+ * In the MMU we also support a new configuration register that
* specifies how the S32C1I instruction operates with the cache
* controller.
*
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 82bbfa5a05b3..94044cc958c2 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -384,7 +384,7 @@ common_exception:
/* Save optional registers. */
save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
-
+
#ifdef CONFIG_TRACE_IRQFLAGS
l32i a4, a1, PT_DEPC
/* Double exception means we came here with an exception
@@ -433,7 +433,7 @@ common_exception_return:
* We need to check some flags for signal handling and rescheduling,
* and have to restore WB and WS, extra states, and all registers
* in the register file that were in use in the user task.
- * Note that we don't disable interrupts here.
+ * Note that we don't disable interrupts here.
*/
_bbsi.l a4, TIF_NEED_RESCHED, 3f
@@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
* of the proper size instead.
*
* This algorithm simply backs out the register changes started by the user
- * excpetion handler, makes it appear that we have started a window underflow
+ * exception handler, makes it appear that we have started a window underflow
* by rotating the window back and then setting the old window base (OWB) in
* the 'ps' register with the rolled back window base. The 'movsp' instruction
* will be re-executed and this time since the next window frames is in the
* active AR registers it won't cause an exception.
*
* If the WindowUnderflow code gets a TLB miss the page will get mapped
- * the the partial windeowUnderflow will be handeled in the double exception
+ * and the partial window underflow will be handled in the double exception
* handler.
*
* Entry condition:
@@ -1567,8 +1567,8 @@ ENTRY(fast_second_level_miss)
2: /* Special case for cache aliasing.
* We (should) only get here if a clear_user_page, copy_user_page
- * or the aliased cache flush functions got preemptively interrupted
- * by another task. Re-establish temporary mapping to the
+ * or the aliased cache flush functions got preemptively interrupted
+ * by another task. Re-establish temporary mapping to the
* TLBTEMP_BASE areas.
*/
diff --git a/crypto/asymmetric_keys/pkcs7_parser.h b/crypto/asymmetric_keys/pkcs7_parser.h
index efc7dc9b8f9c..0e51bec18672 100644
--- a/crypto/asymmetric_keys/pkcs7_parser.h
+++ b/crypto/asymmetric_keys/pkcs7_parser.h
@@ -40,7 +40,7 @@ struct pkcs7_signed_info {
*
* This contains the generated digest of _either_ the Content Data or
* the Authenticated Attributes [RFC2315 9.3]. If the latter, one of
- * the attributes contains the digest of the the Content Data within
+ * the attributes contains the digest of the Content Data within
* it.
*/
struct public_key_signature sig;
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 6f1c616910ac..826a754954f3 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -47,7 +47,7 @@
/*
* Common set of includes for all ACPICA source files.
* We put them here because we don't want to duplicate them
- * in the the source code again and again.
+ * in the source code again and again.
*
* Note: The order of these include files is important.
*/
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 41519a958083..75e61da5d998 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -435,7 +435,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
* The 64-bit X fields are optional extensions to the original 32-bit FADT
* V1.0 fields. Even if they are present in the FADT, they are optional and
* are unused if the BIOS sets them to zero. Therefore, we must copy/expand
- * 32-bit V1.0 fields to the 64-bit X fields if the the 64-bit X field is
+ * 32-bit V1.0 fields to the 64-bit X fields if the 64-bit X field is
* originally zero.
*
* For ACPI 1.0 FADTs (that contain no 64-bit addresses), all 32-bit address
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index dd9dfa15e9d1..d086acf9562f 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -563,7 +563,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
wake_up_interruptible(&apm_waitqueue);
/*
- * Wait for the the suspend_acks_pending variable to drop to
+ * Wait for the suspend_acks_pending variable to drop to
* zero, meaning everybody acked the suspend event (or the
* process was killed.)
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 02225eb19cf6..619f3a30ec55 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -111,7 +111,7 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
}
/**
- * fifo_icap_set_read_size - Set the the size register.
+ * fifo_icap_set_read_size - Set the size register.
* @drvdata: a pointer to the drvdata.
* @data: the size of the following read transaction, in words.
**/
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index e431d11abf8d..231f0149c540 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -168,7 +168,7 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv)
/*
* Look for the timer stop flag in the different states, so that we know
* if the broadcast timer has to be set up. The loop is in the reverse
- * order, because usually one of the deeper states have this flag set.
+ * order, because usually one of the deeper states has this flag set.
*/
for (i = drv->state_count - 1; i >= 0 ; i--) {
if (drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP) {
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 5da5b98b8f29..60f2267c1350 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -53,7 +53,7 @@
#define CMD0_IRQ_THRESHOLD 1
/*
- * The timeout period (in jiffies) for a PDU. When the the number of PDUs in
+ * The timeout period (in jiffies) for a PDU. When the number of PDUs in
* flight is greater than the STAT_IRQ_THRESHOLD or 0 the timer is disabled.
* When there are packets in flight but lower than the threshold, we enable
* the timer and at expiry, attempt to remove any processed packets from the
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 1c73f4fbc252..2f2a4276a014 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -435,7 +435,7 @@ static int hash_get_device_data(struct hash_ctx *ctx,
* @keylen: The lengt of the key.
*
* Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the the hw design spec. Either due to incorrect info in the
+ * specified in the hw design spec. Either due to incorrect info in the
* spec or due to a bug in the hw.
*/
static void hash_hw_write_key(struct hash_device_data *device_data,
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 3784e81e7762..d548a717d5b9 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -471,7 +471,7 @@ static int ichx_gpio_probe(struct platform_device *pdev)
/*
* If necessary, determine the I/O address of ACPI/power management
- * registers which are needed to read the the GPE0 register for GPI pins
+ * registers which are needed to read the GPE0 register for GPI pins
* 0 - 15 on some chipsets.
*/
if (!ichx_priv.desc->uses_gpe0)
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 41e91d70301e..9b43e701db28 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -111,7 +111,7 @@ static int sch_gpio_core_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
@@ -201,7 +201,7 @@ static int sch_gpio_resume_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 04a209e2b66d..ff92d4c5e379 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -529,12 +529,12 @@ EXPORT_SYMBOL(drm_mm_replace_node);
*
* The DRM range allocator supports this use-case through the scanning
* interfaces. First a scan operation needs to be initialized with
- * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The the driver adds
+ * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The driver adds
* objects to the roaster (probably by walking an LRU list, but this can be
* freely implemented) until a suitable hole is found or there's no further
* evitable object.
*
- * The the driver must walk through all objects again in exactly the reverse
+ * The driver must walk through all objects again in exactly the reverse
* order to restore the allocator state. Note that while the allocator is used
* in the scan mode no other operation is allowed.
*
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 28f91df2604d..6b33655226ed 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2387,7 +2387,7 @@ int __i915_add_request(struct intel_engine_cs *ring,
/* Whilst this request exists, batch_obj will be on the
* active_list, and so will hold the active reference. Only when this
- * request is retired will the the batch_obj be moved onto the
+ * request is retired will the batch_obj be moved onto the
* inactive_list and lose its active reference. Hence we do not need
* to explicitly hold another reference here.
*/
diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c
index d182058383a9..e6646df95744 100644
--- a/drivers/gpu/drm/i915/i915_gem_userptr.c
+++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
@@ -225,7 +225,7 @@ i915_mmu_notifier_add(struct drm_device *dev,
* either has cancelled gup work queued and we need to
* return back to the user to give time for the gup-workers
* to flush their object references upon which the object will
- * be removed from the interval-tree, or the the range is
+ * be removed from the interval-tree, or the range is
* still in use by another client and the overlap is invalid.
*
* If we do have an overlap, we cannot use the interval tree
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 507370513f3d..eb3e21942866 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2703,7 +2703,7 @@ void intel_display_handle_reset(struct drm_device *dev)
* will get its events and not get stuck.
*
* Also update the base address of all primary
- * planes to the the last fb to make sure we're
+ * planes to the last fb to make sure we're
* showing the correct fb after a reset.
*
* Need to make two loops over the crtcs so that we
@@ -11164,7 +11164,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
}
/* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
+ * update the output configuration. */
intel_modeset_update_state(dev, prepare_pipes);
if (dev_priv->display.modeset_global_resources)
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 92be50c39ffd..2be3040b28f1 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -2802,8 +2802,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t
ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 00c0d2ba22d3..36af5f14f622 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -353,7 +353,7 @@
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index f41cc1538e48..e66b086c2edc 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -379,7 +379,7 @@ void radeon_doorbell_free(struct radeon_device *rdev, u32 doorbell)
/*
* radeon_wb_*()
- * Writeback is the the method by which the the GPU updates special pages
+ * Writeback is the method by which the GPU updates special pages
* in memory with the status of certain GPU events (fences, ring pointers,
* etc.).
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 995167025282..f76b9c4f95ea 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -45,7 +45,7 @@
* for GPU/CPU synchronization. When the fence is written,
* it is expected that all buffers associated with that fence
* are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed. Whether
+ * that the relevant GPU caches have been flushed. Whether
* we use a scratch register or memory location depends on the asic
* and whether writeback is enabled.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c
index 4532cc76a0a6..37fca1da4ba1 100644
--- a/drivers/gpu/drm/radeon/radeon_vm.c
+++ b/drivers/gpu/drm/radeon/radeon_vm.c
@@ -40,8 +40,8 @@
* can be mapped as snooped (cached system pages) or unsnooped
* (uncached system pages).
* Each VM has an ID associated with it and there is a page table
- * associated with each VMID. When execting a command buffer,
- * the kernel tells the the ring what VMID to use for that command
+ * associated with each VMID. When executing a command buffer,
+ * the kernel tells the ring what VMID to use for that command
* buffer. VMIDs are allocated dynamically as commands are submitted.
* The userspace drivers maintain their own address space and the kernel
* sets up their pages tables accordingly when they submit their
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 433f72a1c006..2d60954c5247 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -573,7 +573,7 @@ EXPORT_SYMBOL_GPL(vmbus_close);
* vmbus_sendpacket() - Send the specified buffer on the given channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @requestid: Identifier of the request
* @type: Type of packet that is being send e.g. negotiate, time
* packet etc.
@@ -750,7 +750,7 @@ EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
* vmbus_recvpacket() - Retrieve the user packet on the specified channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @buffer_actual_len: The actual size of the data after it was received
* @requestid: Identifier of the request
*
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 4d6b26979fbd..5a358e591403 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -849,8 +849,8 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the information we
- * need from DSDT.
+ * VMBUS is an acpi enumerated device. Get the IRQ information
+ * from DSDT.
*/
static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index 033d6aca47d3..d41d7e3bf31c 100644
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -117,7 +117,7 @@ static int ucd9200_probe(struct i2c_client *client,
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
- * for the the phases of the rail.
+ * for the phases of the rail.
*/
for (i = 0; i < info->pages; i++) {
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 28cfe97cf1e9..231b54591e2b 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -87,7 +87,7 @@
* These 3 values (SDR and DDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
+ * are also the possible values for ipath_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define IPATH_IB_SDR 1
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index c00ae093b6f8..6b6499a690af 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -333,7 +333,7 @@ struct qib_verbs_txreq {
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for qib_link_speed_enabled and active
+ * are also the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 8c7d94200bdb..c1418e619f0c 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -17,7 +17,7 @@
/*
* Timer function which is run every scan_ms ms when the device is opened.
- * The dev input variable is set to the the input_dev pointer.
+ * The dev input variable is set to the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_polled_dev *dev)
{
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 114f3bcba1b0..24c15bfb2199 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1566,7 +1566,7 @@ reset_hfcsusb(struct hfcsusb *hw)
write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
((hw->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 6590558d1d31..010d3c6cd5f4 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -202,7 +202,7 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
/*:*/
/*H:030
- * Let's jump straight to the the main loop which runs the Guest.
+ * Let's jump straight to the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
* going around and around until something interesting happens.
*/
diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h
index e404b6e44802..ce0fb855c705 100644
--- a/drivers/media/dvb-frontends/tda1002x.h
+++ b/drivers/media/dvb-frontends/tda1002x.h
@@ -1,6 +1,6 @@
/*
TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index 71fb63299de7..17534ff576ca 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1134,7 +1134,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
state->pll_pfactor = 0;
}
- /* Establish any defaults the the user didn't pass */
+ /* Establish any defaults the user didn't pass */
tda10048_establish_defaults(&state->frontend);
/* Set the xtal and freq defaults */
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..1f8820f5f8c0 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -37,7 +37,7 @@
(compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
/* We calculate the baseband frequencies of the carrier and the pilot tones
- * based on the the sampling rate of the audio rds fifo. */
+ * based on the sampling rate of the audio rds fifo. */
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index 2ad65eb29832..00e0818abfc9 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -555,7 +555,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f)
reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94);
/* Okay, we've wasted time working out the correct value,
- but if we use it, it fouls the the window alignment.
+ but if we use it, it fouls the window alignment.
Fudge it to what we want... */
reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16));
reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16));
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index cc1be8a7a451..bee06f31869d 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -636,7 +636,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
}
/* Check that the hardware is accessible. If the status bytes are
- * 0xFF then the device is not accessible, the the IRQ belongs
+ * 0xFF then the device is not accessible, the IRQ belongs
* to another driver.
* 4 x u32 interrupt registers.
*/
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 33b9660b7f77..6ea16e20449d 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -316,7 +316,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
* vpbe_get_output - Get output
* @vpbe_dev - vpbe device ptr
*
- * return current vpbe output to the the index
+ * return current vpbe output to the index
*/
static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
{
diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 3d2babd5067a..b8181874a149 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -505,7 +505,7 @@ static int fimc_capture_open(struct file *file)
if (ret == 0 && vc->user_subdev_api && vc->inh_sensor_ctrls) {
/*
- * Recreate controls of the the video node to drop
+ * Recreate controls of the video node to drop
* any controls inherited from the sensor subdev.
*/
fimc_ctrls_delete(vc->ctx);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 72265e58ca60..2beb186d24ed 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1698,7 +1698,7 @@ void omap3isp_print_status(struct isp_device *isp)
* To solve this problem power management support is split into prepare/complete
* and suspend/resume operations. The pipelines are stopped in prepare() and the
* ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
- * resume(), and the the pipelines are restarted in complete().
+ * resume(), and the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not modelled explicitly
* yet.
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index d56f927fc31a..b5d2e805380d 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 474a17e4db0c..4c7f8fed8046 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h
index 0f461ca10cb9..82d19dcdebc0 100644
--- a/drivers/media/usb/dvb-usb/friio.h
+++ b/drivers/media/usb/dvb-usb/friio.h
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
index 52bdb569760b..414c1b752911 100644
--- a/drivers/media/usb/gspca/finepix.c
+++ b/drivers/media/usb/gspca/finepix.c
@@ -143,7 +143,7 @@ again:
* for, then it's the end of the
* frame. Sometimes the jpeg is not complete,
* but there's nothing we can do. We also end
- * here if the the jpeg ends right at the end
+ * here if the jpeg ends right at the end
* of the frame. */
gspca_frame_add(gspca_dev, LAST_PACKET,
data, len);
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 2e8c3afe4ec4..b7b5a1f630af 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1313,7 +1313,7 @@ static int tm6000_usb_probe(struct usb_interface *interface,
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
-/* check if the the device has the iso in endpoint at the correct place */
+/* check if the device has the iso in endpoint at the correct place */
if (!dev->isoc_in.endp) {
printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
rc = -ENODEV;
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 9ace520bb079..454ef64f836b 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1000,7 +1000,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
}
/* Synchronize to the input stream by waiting for the FID bit to be
- * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE.
* stream->last_fid is initialized to -1, so the first isochronous
* frame will always be in sync.
*
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index 9ccb19a435ef..fabf4f6b5d40 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -981,7 +981,7 @@ static void v4l_sanitize_format(struct v4l2_format *fmt)
/*
* The v4l2_pix_format structure has been extended with fields that were
* not previously required to be set to zero by applications. The priv
- * field, when set to a magic value, indicates the the extended fields
+ * field, when set to a magic value, indicates that the extended fields
* are valid. Otherwise they will contain undefined values. To simplify
* the API towards drivers zero the extended fields and set the priv
* field to the magic value when the extended pixel format structure
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 04644e7b42b1..303b322756c7 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -373,7 +373,7 @@ static const struct lpddr2_addressing *get_addressing_table(
}
/*
- * Find the the right timing table from the array of timing
+ * Find the right timing table from the array of timing
* tables of the device using DDR clock frequency
*/
static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 613231c16194..4591bd235a00 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
* @target: per target private data
* @sdev: SCSI device
*
- * Update the target negotiation parameters based on the the Inquiry
+ * Update the target negotiation parameters based on the Inquiry
* data, adapter capabilities, and NVRAM settings.
**/
static void
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 193cf168ba84..5d03af1f5103 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -898,7 +898,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
- * This function sets the the operating point of the ARM.
+ * This function sets the operating point of the ARM.
*/
int db8500_prcmu_set_arm_opp(u8 opp)
{
diff --git a/drivers/misc/mic/bus/mic_bus.c b/drivers/misc/mic/bus/mic_bus.c
index 961ae90aae47..1b15af8c5101 100644
--- a/drivers/misc/mic/bus/mic_bus.c
+++ b/drivers/misc/mic/bus/mic_bus.c
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ drivers/virtio/virtio.c
*/
#include <linux/slab.h>
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 913de07e577c..6482a9c4eb44 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -48,7 +48,7 @@
* kernel/user requirements.
*
* Blade percpu resources reserved for kernel use. These resources are
- * reserved whenever the the kernel context for the blade is loaded. Note
+ * reserved whenever the kernel context for the blade is loaded. Note
* that the kernel context is not guaranteed to be always available. It is
* loaded on demand & can be stolen by a user if the user demand exceeds the
* kernel demand. The kernel can always reload the kernel context but
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 95c894482fdd..f87520cfb787 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1594,7 +1594,7 @@ out_2:
* by xpc_notify_senders_of_disconnect_uv(), and to also get an
* error returned here will confuse them. Additionally, since
* in this case the channel is being disconnected we don't need
- * to put the the msg_slot back on the free list.
+ * to put the msg_slot back on the free list.
*/
if (cmpxchg(&msg_slot->func, func, NULL) != func) {
ret = xpSuccess;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 959cb9b70310..c5b1237ecb33 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -942,7 +942,7 @@ static uint8_t gpmi_read_byte(struct mtd_info *mtd)
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
- * because the the operations are the same.
+ * because the operations are the same.
*/
static void block_mark_swapping(struct gpmi_nand_data *this,
void *payload, void *auxiliary)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 320fc38fa2a1..ba2cd98a2d6c 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -252,7 +252,7 @@ struct ubi_fm_pool {
/**
* struct ubi_volume - UBI volume description data structure.
- * @dev: device object to make use of the the Linux device model
+ * @dev: device object to make use of the Linux device model
* @cdev: character device object to create character device
* @ubi: reference to the UBI device description object
* @vol_id: volume ID
@@ -380,7 +380,7 @@ struct ubi_debug_info {
/**
* struct ubi_device - UBI device description structure
- * @dev: UBI device object to use the the Linux device model
+ * @dev: UBI device object to use for the Linux device model
* @cdev: character device object to create character device
* @ubi_num: UBI device number
* @ubi_name: UBI device name
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 6654f191868e..c1271ed881c4 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -727,7 +727,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
/**
* sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
- * @e: the the physical eraseblock to erase
+ * @e: the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
*
* This function returns zero in case of success and a negative error code in
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 5e8b5609c067..ad5bfe8618a6 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -532,7 +532,7 @@ static int xcan_rx(struct net_device *ndev)
* @isr: interrupt status register value
*
* This is the CAN error interrupt and it will
- * check the the type of error and forward the error
+ * check the type of error and forward the error
* frame to upper layers.
*/
static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c
index 384dc163851b..1d7d13caae92 100644
--- a/drivers/net/ethernet/agere/et131x.c
+++ b/drivers/net/ethernet/agere/et131x.c
@@ -1109,7 +1109,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
writel(0, &rxmac->mif_ctrl);
writel(0, &rxmac->space_avail);
- /* Initialize the the mif_ctrl register
+ /* Initialize the mif_ctrl register
* bit 3: Receive code error. One or more nibbles were signaled as
* errors during the reception of the packet. Clear this
* bit in Gigabit, set it in 100Mbit. This was derived
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index 47bfea24b9e1..b93c11cd3b73 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1234,7 +1234,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
* @budget : maximum number of packets that the current CPU can receive from
* all interfaces.
* Description :
- * This function implements the the reception process.
+ * This function implements the reception process.
* Also it runs the TX completion thread
*/
static int xgmac_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 9a18e7930b31..92c4c46d2f0b 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2353,7 +2353,7 @@ static irqreturn_t be_intx(int irq, void *dev)
}
be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- /* Return IRQ_HANDLED only for the the first spurious intr
+ /* Return IRQ_HANDLED only for the first spurious intr
* after a valid intr to stop the kernel from branding
* this irq as a bad one!
*/
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 45c8c864104e..960e5fa4fb7b 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -3986,7 +3986,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
* @hw: Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*/
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 48b74a549155..392eb5748897 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3892,7 +3892,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
* @hw: pointer to the HW structure
*
* ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
- * register, so the the bus width is hard coded.
+ * register, so the bus width is hard coded.
**/
static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
index 14a4ea795c01..dd6254921e20 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
@@ -809,7 +809,7 @@ static s32 fm10k_mbx_read(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
* @hw: pointer to hardware structure
* @mbx: pointer to mailbox
*
- * This function copies the message from the the message array to mbmem
+ * This function copies the message from the message array to mbmem
**/
static void fm10k_mbx_write(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
{
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 051ea94bdcd3..49c5a37e01b2 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2166,7 +2166,7 @@ out:
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index fec5212d4337..f9595241b269 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -229,7 +229,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
struct pci_dev *pdev;
- /* determine whether to use the the parent device
+ /* determine whether to use the parent device
*/
if (ixgbe_pcie_from_parent(&adapter->hw))
pdev = adapter->pdev->bus->parent->self;
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index f5e4b820128b..aad8fdb4dfc6 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2158,7 +2158,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
/*
* In PCI 33 mode, the P_PLL is not used, and therefore,
- * the the P_PLL_LOCK bit in the adapter_status register will
+ * the P_PLL_LOCK bit in the adapter_status register will
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 3b67d60d4378..b8da6e89059a 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -83,7 +83,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* returns: 0 on success, -ETIMEDOUT on a timeout
*
* Writes the value to the requested register by first writing the value
- * into MWD register. The the MCR register is then appropriately setup
+ * into MWD register. The MCR register is then appropriately setup
* to finish the write operation.
*/
static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 5a34e72bab9a..6113a29f01bc 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -250,14 +250,14 @@ struct i2400m_barker_db;
*
* @bus_setup: [optional fill] Function called by the bus-generic code
* [i2400m_setup()] to setup the basic bus-specific communications
- * to the the device needed to load firmware. See LIFE CYCLE above.
+ * to the device needed to load firmware. See LIFE CYCLE above.
*
* NOTE: Doesn't need to upload the firmware, as that is taken
* care of by the bus-generic code.
*
* @bus_release: [optional fill] Function called by the bus-generic
* code [i2400m_release()] to shutdown the basic bus-specific
- * communications to the the device needed to load firmware. See
+ * communications to the device needed to load firmware. See
* LIFE CYCLE above.
*
* This function does not need to reset the device, just tear down
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 0b602951ff6b..4466ee71d1e4 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -693,7 +693,7 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq,
* right spot where to insert the packet; we know the queue is
* not empty, so we are not the first ones; we also know we
* are not going to be the last ones. The list is sorted, so
- * we have to insert before the the first guy with an nsn_itr
+ * we have to insert before the first guy with an nsn_itr
* greater that our nsn. */
skb_queue_walk(&roq->queue, skb_itr) {
roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb;
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index f20886ade1cc..1f7b2b922fae 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -233,7 +233,7 @@
* i2400m_tx_skip_tail() Marks unusable FIFO tail space
* i2400m->bus_tx_kick()
*
- * Now i2400m->bus_tx_kick() is the the bus-specific driver backend
+ * Now i2400m->bus_tx_kick() is the bus-specific driver backend
* implementation; that would do:
*
* i2400m->bus_tx_kick()
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index e1ffdd57a18c..2e3c004641cd 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -77,7 +77,7 @@ struct rx_attention {
* first_msdu is set.
*
* peer_idx_invalid
- * Indicates no matching entries within the the max search
+ * Indicates no matching entries within the max search
* count. Only set when first_msdu is set.
*
* peer_idx_timeout
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index dc6bd8cd9b83..e32154fe1732 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -98,7 +98,7 @@ struct bus_request {
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- * implemented using the asynchronous mode allowing the the bus
+ * implemented using the asynchronous mode allowing the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index eab0ab976af2..9963faaa465f 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1173,7 +1173,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
* Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
+ * response is available in the FIFO
*
* CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index 9a2afa2c690b..5184d6cbcb90 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -638,7 +638,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN,
AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT);
- /* on AR92xx, the highest bit of count will make the the chip send
+ /* on AR92xx, the highest bit of count will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 697c4ae90af0..c8bb48cc410d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1644,7 +1644,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
- /* on AR93xx and newer, count = 0 will make the the chip send
+ /* on AR93xx and newer, count = 0 will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index a1f1127d7808..24cce9db3ce0 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -1609,7 +1609,7 @@ struct wcn36xx_hal_config_bss_params {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -1746,7 +1746,7 @@ struct wcn36xx_hal_config_bss_params_v1 {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -3736,10 +3736,10 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
/* success or failure */
u32 status;
- /* Length of the responce message */
+ /* Length of the response message */
u32 rsp_length;
- /* FIXME: Currently considering the the responce will be less than
+ /* FIXME: Currently considering that the response will be less than
* 100bytes */
u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
} __packed;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 1b474828d5b8..46a0d6575454 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3819,7 +3819,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
}
/*
- * Suspend the the MAC and update the slot timing
+ * Suspend the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index 5bca1f8bfebf..42dda815783f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -191,7 +191,7 @@ enum iwl_tx_flags {
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
+ * @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @key: security key
* @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
@@ -554,7 +554,7 @@ struct iwl_extended_beacon_notif {
/**
* enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
+ * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
index 12283b55ee84..e79ba0a6ad41 100644
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
@@ -67,7 +67,7 @@
#include "fw-api.h"
#include "mvm.h"
-/* Maps the driver specific channel width definition to the the fw values */
+/* Maps the driver specific channel width definition to the fw values */
static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
{
switch (chandef->width) {
@@ -88,7 +88,7 @@ static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
/*
* Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
+ * freq) definitions to the fw values
*/
static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index 2713f7acd35e..53618b0e29c0 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -262,7 +262,7 @@ free_and_exit:
* This function is called when the 'fw_dump' file is opened for
* reading.
* This function dumps firmware memory in different files
- * (ex. DTCM, ITCM, SQRAM etc.) based on the the segments for
+ * (ex. DTCM, ITCM, SQRAM etc.) based on the segments for
* debugging.
*/
static ssize_t
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 8428858204a6..e1f05ad89d9e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -596,7 +596,7 @@ static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
* rsi_sdio_host_intf_read_pkt() - This function reads the packet
from the device.
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
* @length: Length of the data to be read from the device.
*
* Return: 0 on success, -1 on failure.
@@ -627,7 +627,7 @@ int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter,
* rsi_init_sdio_interface() - This function does init specific to SDIO.
*
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
*
* Return: 0 on success, -1 on failure.
*/
diff --git a/drivers/net/wireless/ti/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h
index 2bdec38699f4..bfe998947957 100644
--- a/drivers/net/wireless/ti/wl1251/acx.h
+++ b/drivers/net/wireless/ti/wl1251/acx.h
@@ -1243,7 +1243,7 @@ struct wl1251_acx_arp_filter {
u8 address[16]; /* The IP address used to filter ARP packets.
ARP packets that do not match this address are
dropped. When the IP Version is 4, the last 12
- bytes of the the address are ignored. */
+ bytes of the address are ignored. */
} __attribute__((packed));
struct wl1251_acx_ac_cfg {
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 2305dc0382bc..26a51bdecd44 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1852,7 +1852,7 @@ static void of_alias_add(struct alias_prop *ap, struct device_node *np,
* of_alias_scan - Scan all properties of 'aliases' node
*
* The function scans all the properties of 'aliases' node and populate
- * the the global lookup table with the properties. It returns the
+ * the global lookup table with the properties. It returns the
* number of alias_prop found, or error code in error case.
*
* @dt_alloc: An allocator that provides a virtual address to memory
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index bcb90e4888dd..c1dc11893cea 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -36,7 +36,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#define pr_fmt(fmt) "acpiphp_glue: " fmt
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
index 7dfef3ee5b53..40511e39cea5 100644
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ b/drivers/pcmcia/pxa2xx_hx4700.c
@@ -33,7 +33,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/*
* IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
* The asic3 default IRQ type is level trigger low level detect, exactly
- * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+ * the signal present on GPIOD4_CF_nCD when a CF card is inserted.
* If the IRQ type is not changed, the asic3 interrupt handler will loop
* repeatedly because it is unable to clear the level trigger interrupt.
*/
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index 746db6acf648..ca1f9f5bdd61 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1265,7 +1265,7 @@ static int nmk_gpio_probe(struct platform_device *dev)
platform_set_drvdata(dev, nmk_chip);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 354a81d40925..fcdc83a9ade2 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1627,7 +1627,7 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 62653f50a524..6f0afdff9402 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -302,8 +302,9 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
ret = power_supply_show_property(dev, attr, prop_buf);
if (ret == -ENODEV || ret == -ENODATA) {
- /* When a battery is absent, we expect -ENODEV. Don't abort;
- send the uevent with at least the the PRESENT=0 property */
+ /* When a battery is absent, we expect -ENODEV.
+ * Don't abort; send the uevent with at least
+ * the PRESENT=0 property */
ret = 0;
continue;
}
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index 28871cd7e3b5..f224020e14d8 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -122,7 +122,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
- * configurations, so we use the the first method there, stripping off
+ * configurations, so we use the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index fd22c811cbe1..8a84e2e42ca2 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3454,7 +3454,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 2035b0d64351..e62a7346428a 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1983,7 +1983,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
/*
* Device's PID has changed. We need to cleanup
* and re-login. If there is another device with
- * the the newly discovered pid, send an scn notice
+ * the newly discovered pid, send an scn notice
* so that its new pid can be discovered.
*/
list_for_each(qe, &rport->port->rport_q) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 4a8ac7d8c76b..32ae141449ff 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -510,7 +510,7 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
* @skb: The receive skb
* @netdev: The associated net device
* @ptype: The packet_type structure which was used to register this handler
- * @orig_dev: The original net_device the the skb was received on.
+ * @orig_dev: The original net_device that the skb was received on.
* (in case dev is a bond)
*
* Returns: 0 for success
@@ -2726,7 +2726,7 @@ module_exit(fcoe_exit);
* fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
* @seq: active sequence in the FLOGI or FDISC exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
@@ -2755,7 +2755,7 @@ done:
* fcoe_logo_resp() - FCoE specific LOGO response handler
* @seq: active sequence in the LOGO exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 34a1b1f333b4..65a53a9eb059 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -213,7 +213,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new)
* that doesn't have a priv (fcf was deleted). However,
* libfcoe will always delete FCFs before trying to add
* them. This is ensured because both recv_adv and
- * age_fcfs are protected by the the fcoe_ctlr's mutex.
+ * age_fcfs are protected by the fcoe_ctlr's mutex.
* This means that we should never get a FCF with a
* non-NULL priv pointer.
*/
@@ -694,7 +694,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
*
* The caller must check that the length is a multiple of 4.
* The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
- * The the skb must also be an fc_frame.
+ * The skb must also be an fc_frame.
*
* This is called from the lower-level driver with spinlocks held,
* so we must not take a mutex here.
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 22a9bb1abae1..025ec5c10978 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -244,7 +244,7 @@ enum sci_controller_states {
SCIC_INITIALIZED,
/**
- * This state indicates the the controller is in the process of becoming
+ * This state indicates that the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 47a013fffae7..07af745220eb 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete(
* permitted. This state is entered from the INITIAL state. This state
* is entered from the STOPPING state.
*
- * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * @SCI_DEV_STARTING: This state indicates that the remote device is in
* the process of becoming ready (i.e. starting). In this state no new
* IO operations are permitted. This state is entered from the STOPPED
* state.
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
index c7ee81d01125..f22950b12b8b 100644
--- a/drivers/scsi/isci/remote_node_context.h
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state {
/**
* struct sci_remote_node_context - This structure contains the data
* associated with the remote node context object. The remote node context
- * (RNC) object models the the remote device information necessary to manage
+ * (RNC) object models the remote device information necessary to manage
* the silicon RNC.
*/
struct sci_remote_node_context {
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 5d6fda72d659..ba330e56bfe7 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -67,7 +67,7 @@
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
-* @ihost: host on which the the request was queued
+* @ihost: host on which the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 2f9b96826ac0..8a76261d8915 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1680,7 +1680,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -1713,7 +1713,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -1846,7 +1846,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -1878,7 +1878,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 4c25485aa934..33f0cd6baf2d 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5806,7 +5806,7 @@ reject_out:
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful, the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 5452f1f4220e..69ff3f9fa92b 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2040,7 +2040,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so that the round robin selection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
@@ -5746,7 +5746,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
}
/* This routine decrements the reference count for a ndlp structure. If the
- * count goes to 0, this indicates the the associated nodelist should be
+ * count goes to 0, this indicates that the associated nodelist should be
* freed. Returning 1 indicates the ndlp resource has been released; on the
* other hand, returning 0 indicates the ndlp resource has not been released
* yet.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0b2c53af85c7..015cc6f07dff 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3917,7 +3917,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelevant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 06241f590c1e..f1666cdcb02c 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2265,7 +2265,7 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * that the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 207a43d952fa..94826050e89e 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -16743,7 +16743,7 @@ out:
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 933f21471951..50291d5ec1d9 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3220,7 +3220,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when HBA driver received the identify done event or initiate FIS received
* event(for SATA), it will invoke this function to notify the sas layer that
- * the sas toplogy has formed, please discover the the whole sas domain,
+ * the sas toplogy has formed, please discover the whole sas domain,
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 80b8408ac3e3..4cbdc43d509c 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -354,7 +354,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
{
/*
* On all 4xx PPC's the SPI bus is shared/multiplexed with
- * the 2nd I2C bus. We need to enable the the SPI bus before
+ * the 2nd I2C bus. We need to enable the SPI bus before
* using it.
*/
diff --git a/drivers/staging/android/ion/ion.c b/drivers/staging/android/ion/ion.c
index 56604f41ec48..290d4d22c102 100644
--- a/drivers/staging/android/ion/ion.c
+++ b/drivers/staging/android/ion/ion.c
@@ -902,7 +902,7 @@ void ion_pages_sync_for_device(struct device *dev, struct page *page,
sg_set_page(&sg, page, size, 0);
/*
* This is not correct - sg_dma_address needs a dma_addr_t that is valid
- * for the the targeted device, but this works on the currently targeted
+ * for the targeted device, but this works on the currently targeted
* hardware.
*/
sg_dma_address(&sg) = page_to_phys(page);
diff --git a/drivers/staging/android/uapi/binder.h b/drivers/staging/android/uapi/binder.h
index dba4cef3a8d3..1faba0154a9d 100644
--- a/drivers/staging/android/uapi/binder.h
+++ b/drivers/staging/android/uapi/binder.h
@@ -265,7 +265,7 @@ enum binder_driver_return_protocol {
BR_FAILED_REPLY = _IO('r', 17),
/*
- * The the last transaction (either a bcTRANSACTION or
+ * The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
};
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index 01796cd28e5b..8ed150689f97 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -35,7 +35,7 @@
* automatically.
*
* The PCI230+ and PCI260+ have the same PCI device IDs as the PCI230 and
- * PCI260, but can be distinguished by the the size of the PCI regions. A
+ * PCI260, but can be distinguished by the size of the PCI regions. A
* card will be configured as a "+" model if detected as such.
*
* Subdevices:
diff --git a/drivers/staging/lustre/lustre/llite/file.c b/drivers/staging/lustre/lustre/llite/file.c
index c99b74117152..f1f75c7edee0 100644
--- a/drivers/staging/lustre/lustre/llite/file.c
+++ b/drivers/staging/lustre/lustre/llite/file.c
@@ -368,7 +368,7 @@ int ll_file_release(struct inode *inode, struct file *file)
fd = LUSTRE_FPRIVATE(file);
LASSERT(fd != NULL);
- /* The last ref on @file, maybe not the the owner pid of statahead.
+ /* The last ref on @file, maybe not the owner pid of statahead.
* Different processes can open the same dir, "ll_opendir_key" means:
* it is me that should stop the statahead thread. */
if (S_ISDIR(inode->i_mode) && lli->lli_opendir_key == fd &&
diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
index 20341b27a06a..e8d00408117a 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
@@ -448,7 +448,7 @@ struct timeout_item* ptlrpc_new_timeout(int time, enum timeout_event event,
}
/**
- * Register timeout event on the the pinger thread.
+ * Register timeout event on the pinger thread.
* Note: the timeout list is an sorted list with increased timeout value.
*/
static struct timeout_item*
diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index 9935e66935af..350d2e73b419 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -456,7 +456,7 @@ u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network *pnetwork)
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the connection. */
+ /* If the driver wants to use the bssid to create the connection. */
/* If not, we have to copy the connecting AP's MAC address to it so that */
/* the driver just has the bssid information for PMKIDList searching. */
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 73de9e9669f6..7487b970b670 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -922,7 +922,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
int i;
struct ieee80211_rxb *rxb = NULL;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.c b/drivers/staging/rtl8712/rtl871x_cmd.c
index d9c1561e3272..5aae4cce8477 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -527,7 +527,7 @@ u8 r8712_joinbss_cmd(struct _adapter *padapter, struct wlan_network *pnetwork)
memcpy(&psecuritypriv->authenticator_ie[1],
&psecnetwork->IEs[12], (256-1));
psecnetwork->IELength = 0;
- /* If the the driver wants to use the bssid to create the connection.
+ /* If the driver wants to use the bssid to create the connection.
* If not, we copy the connecting AP's MAC address to it so that
* the driver just has the bssid information for PMKIDList searching.
*/
diff --git a/drivers/staging/rtl8723au/core/rtw_cmd.c b/drivers/staging/rtl8723au/core/rtw_cmd.c
index 4eaa50297b95..ad32384e54ea 100644
--- a/drivers/staging/rtl8723au/core/rtw_cmd.c
+++ b/drivers/staging/rtl8723au/core/rtw_cmd.c
@@ -518,7 +518,7 @@ int rtw_joinbss_cmd23a(struct rtw_adapter *padapter,
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the
+ /* If the driver wants to use the bssid to create the
* connection. If not, we have to copy the connecting AP's
* MAC address to it so that the driver just has the bssid
* information for PMKIDList searching. */
diff --git a/drivers/staging/unisys/common-spar/include/channels/iochannel.h b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
index b1dd73d1f42c..806d5b3bca48 100644
--- a/drivers/staging/unisys/common-spar/include/channels/iochannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
@@ -594,7 +594,7 @@ struct uiscmdrsp_scsitaskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
@@ -641,7 +641,7 @@ struct uiscmdrsp_vdiskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
diff --git a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
index 1231c454176f..bc5cd2951a33 100644
--- a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
@@ -67,11 +67,11 @@ typedef struct _ULTRA_VBUS_HEADERINFO {
u32 devInfoCount; /* num of items in DevInfo member */
/* (this is the allocated size) */
u32 chpInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the ChpInfo struct (below) */
+ /* to the ChpInfo struct (below) */
u32 busInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the BusInfo struct (below) */
+ /* to the BusInfo struct (below) */
u32 devInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the DevInfo array (below) */
+ /* to the DevInfo array (below) */
u8 reserved[104];
} ULTRA_VBUS_HEADERINFO;
diff --git a/drivers/staging/unisys/virtpci/virtpci.c b/drivers/staging/unisys/virtpci/virtpci.c
index ee9f8260cd15..058ecc2440ea 100644
--- a/drivers/staging/unisys/virtpci/virtpci.c
+++ b/drivers/staging/unisys/virtpci/virtpci.c
@@ -752,7 +752,7 @@ static int virtpci_device_resume(struct device *dev)
/* For a child device just created on a client bus, fill in
* information about the driver that is controlling this device into
- * the the appropriate slot within the vbus channel of the bus
+ * the appropriate slot within the vbus channel of the bus
* instance.
*/
static void fix_vbus_devInfo(struct device *dev, int devNo, int devType,
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index fbc5ebb5f761..c0664ec01fc2 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -411,7 +411,7 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
} else {
/*
* Extract the RELATIVE TARGET PORT IDENTIFIER to identify
- * the Target Port in question for the the incoming
+ * the Target Port in question for the incoming
* SET_TARGET_PORT_GROUPS op.
*/
rtpi = get_unaligned_be16(ptr + 2);
diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h
index ba87d6e731dd..1a4ba247f160 100644
--- a/drivers/thunderbolt/ctl.h
+++ b/drivers/thunderbolt/ctl.h
@@ -44,7 +44,7 @@ struct tb_cfg_result {
* If err = 1 then this is the port that send the
* error.
* If err = 0 and if this was a cfg_read/write then
- * this is the the upstream port of the responding
+ * this is the upstream port of the responding
* switch.
* Otherwise the field is set to zero.
*/
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 6234c75da33f..50294f31f227 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -313,8 +313,7 @@ static const int hrsl_to_error[] = {
/*
* See http://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a
- * reasonable overview of how control transfers use the the IN/OUT
- * tokens.
+ * reasonable overview of how control transfers use the IN/OUT tokens.
*/
#define MAX3421_HXFR_BULK_IN(ep) (0x00 | (ep)) /* bulk or interrupt */
#define MAX3421_HXFR_SETUP 0x10
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index bc6fcbc16f61..3671975e3272 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1613,7 +1613,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
- * RExit to a disconnect state). If so, let the the driver know it's
+ * RExit to a disconnect state). If so, let the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED(temp) &&
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 01bf53392819..1b99a08ca2de 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -261,7 +261,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
* Cypress app note that describes this mechanism
- * states the the low-speed part can't handle more
+ * states that the low-speed part can't handle more
* than 800 bytes/sec, in which case 4800 baud is the
* safest speed for a part like that.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index dfd728a263d2..71636a617d89 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -429,7 +429,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
}
/*
- * This is the the common top part of all parallel port callback operations that
+ * This is the common top part of all parallel port callback operations that
* send synchronous messages to the device. This implements convoluted locking
* that avoids two scenarios: (1) a port operation is called after usbserial
* has called our release function, at which point struct mos7715_parport has
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 3f4f5fbded55..fe4447f3f2ea 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -46,7 +46,7 @@
*
* ASSUMPTIONS:
*
- * - We use the the as device address the port number where it is
+ * - We use as device address the port number where it is
* connected (port 0 doesn't exist). For unauth, it is 128 + that.
*
* ROADMAP:
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
index b7d4f6b75eef..caa4cb40334d 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/uwb/drp-ie.c
@@ -262,7 +262,7 @@ int uwb_drp_ie_update(struct uwb_rsv *rsv)
* We are given a zone id and the MAS bitmap of bits that need to be set in
* this zone. Note that this zone may already have bits set and this only
* adds settings - we cannot simply assign the MAS bitmap contents to the
- * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * zone contents. We iterate over the bits (MAS) in the zone and set the
* bits that are set in the given MAS bitmap.
*/
static
diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
index d4e7684e7045..501bc08dc125 100644
--- a/drivers/video/fbdev/omap/sossi.c
+++ b/drivers/video/fbdev/omap/sossi.c
@@ -370,7 +370,7 @@ static void sossi_set_bits_per_cycle(int bpc)
int bus_pick_count, bus_pick_width;
/*
- * We set explicitly the the bus_pick_count as well, although
+ * We set explicitly the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
diff --git a/drivers/video/fbdev/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c
index ceb434c95c0d..9177b8056356 100644
--- a/drivers/video/fbdev/sis/sis_accel.c
+++ b/drivers/video/fbdev/sis/sis_accel.c
@@ -215,7 +215,7 @@ SiS310SubsequentScreenToScreenCopy(struct sis_video_info *ivideo, int src_x, int
* and destination blitting areas overlap and
* adapt the bitmap addresses synchronously
* if the coordinates exceed the valid range.
- * The the areas do not overlap, we do our
+ * If the areas do not overlap, we do our
* normal check.
*/
if((mymax - mymin) < height) {
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index aaf96cb25452..52c38b9025c1 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -507,7 +507,7 @@ static int autofs_dev_ioctl_askumount(struct file *fp,
* located path is the root of a mount we return 1 along with
* the super magic of the mount or 0 otherwise.
*
- * In both cases the the device number (as returned by
+ * In both cases the device number (as returned by
* new_encode_dev()) is also returned.
*/
static int autofs_dev_ioctl_ismountpoint(struct file *fp,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index 6f662b34ba0e..bb6a3057a592 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -861,7 +861,7 @@ int btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace)
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
- * not called and the the filesystem is remounted
+ * not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancelation is wanted.
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index 874828dd0a86..ae4a297a513b 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -3427,7 +3427,7 @@ verbose_printk("btrfs: process_recorded_refs %llu\n", sctx->cur_ino);
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
- * the the current inum. To handle this case, we create the
+ * than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 1475979e5718..813e83e6c3f1 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2656,7 +2656,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
mutex_unlock(&log_root_tree->log_mutex);
/*
- * nobody else is going to jump in and write the the ctree
+ * nobody else is going to jump in and write the ctree
* super here because the log_commit atomic below is protecting
* us. We must be called with a transaction handle pinning
* the running transaction open, so a full commit can't hop
diff --git a/fs/dcache.c b/fs/dcache.c
index d5a23fd0da90..a16894acdb11 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1871,8 +1871,8 @@ EXPORT_SYMBOL(d_obtain_root);
* same inode, only the actual correct case is stored in the dcache for
* case-insensitive filesystems.
*
- * For a case-insensitive lookup match and if the the case-exact dentry
- * already exists in in the dcache, use it and return it.
+ * For a case-insensitive lookup match and if the case-exact dentry
+ * already exists in the dcache, use it and return it.
*
* If no entry exists with the exact case name, allocate new dentry with
* the exact case, and return the spliced entry.
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 635e8e16a5b7..baa529767d71 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -899,7 +899,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack {
* @filename: This function kmalloc's the memory for the filename
* @filename_size: This function sets this to the amount of memory
* kmalloc'd for the filename
- * @packet_size: This function sets this to the the number of octets
+ * @packet_size: This function sets this to the number of octets
* in the packet parsed
* @mount_crypt_stat: The mount-wide cryptographic context
* @data: The memory location containing the start of the tag 70
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index d9a17d0b124d..c9c6f2e5a0a0 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -51,7 +51,7 @@ struct ext2_block_alloc_info {
/*
* Was i_next_alloc_goal in ext2_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it is the physical block number of the block which was most-recently
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index bea662bd0ca6..3b94971b7b9b 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -271,7 +271,7 @@ static int ext4_create_inline_data(handle_t *handle,
len = 0;
}
- /* Insert the the xttr entry. */
+ /* Insert the xttr entry. */
i.value = value;
i.value_len = len;
@@ -829,7 +829,7 @@ out:
/*
* Prepare the write for the inline data.
- * If the the data can be written into the inode, we just read
+ * If the data can be written into the inode, we just read
* the page and make it uptodate, and start the journal.
* Otherwise read the page, makes it dirty so that it can be
* handle in writepages(the i_disksize update is left to the
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index 2495bec1c621..dcb02afd6203 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -158,7 +158,7 @@ struct seg_entry {
unsigned short valid_blocks; /* # of valid blocks */
unsigned char *cur_valid_map; /* validity bitmap of blocks */
/*
- * # of valid blocks and the validity bitmap stored in the the last
+ * # of valid blocks and the validity bitmap stored in the last
* checkpoint pack. This information is used by the SSR mode.
*/
unsigned short ckpt_valid_blocks;
diff --git a/fs/kernfs/file.c b/fs/kernfs/file.c
index 4429d6d9217f..2d4e4ef09b73 100644
--- a/fs/kernfs/file.c
+++ b/fs/kernfs/file.c
@@ -259,7 +259,7 @@ static ssize_t kernfs_fop_read(struct file *file, char __user *user_buf,
* There is no easy way for us to know if userspace is only doing a partial
* write, so we don't support them. We expect the entire buffer to come on
* the first write. Hint: if you're writing a value, first read the file,
- * modify only the the value you're changing, then write entire buffer
+ * modify only the value you're changing, then write entire buffer
* back.
*/
static ssize_t kernfs_fop_write(struct file *file, const char __user *user_buf,
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 044013455621..c0aa12bdb106 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -690,7 +690,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb,
/*
* Under certain conditions, the window slide code
* might have reduced the number of bits available or
- * disabled the the local alloc entirely. Re-check
+ * disabled the local alloc entirely. Re-check
* here and return -ENOSPC if necessary.
*/
status = -ENOSPC;
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index 5a6bd5d8779a..85438d16e633 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -71,7 +71,7 @@ xfs_fs_encode_fh(
fileid_type = FILEID_INO32_GEN_PARENT;
/*
- * If the the filesystem may contain 64bit inode numbers, we need
+ * If the filesystem may contain 64bit inode numbers, we need
* to use larger file handles that can represent them.
*
* While we only allocate inodes that do not fit into 32 bits any
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index 26bb55e9e8b6..37cdb83e1e24 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -120,7 +120,7 @@ static inline int drm_rect_height(const struct drm_rect *r)
}
/**
- * drm_rect_visible - determine if the the rectangle is visible
+ * drm_rect_visible - determine if the rectangle is visible
* @r: rectangle whose visibility is returned
*
* RETURNS:
diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h
index d5b5f76d57ef..91c32b80c6d1 100644
--- a/include/linux/mic_bus.h
+++ b/include/linux/mic_bus.h
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ include/linux/virtio.h.
*/
#ifndef _MIC_BUS_H_
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 02d11ee7f19d..8230369b0cca 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -197,7 +197,7 @@ extern pgprot_t protection_map[16];
#define FAULT_FLAG_USER 0x80 /* The fault originated in userspace */
/*
- * vm_fault is filled by the the pagefault handler and passed to the vma's
+ * vm_fault is filled by the pagefault handler and passed to the vma's
* ->fault function. The vma's ->fault is responsible for returning a bitmask
* of VM_FAULT_xxx flags that give details about how the fault was handled.
*
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 1c9effa25e26..85a8edc122bf 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -106,7 +106,7 @@ struct kparam_array
* ".") the kernel commandline parameter. Note that - is changed to _, so
* the user can use "foo-bar=1" even for variable "foo_bar".
*
- * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * @perm is 0 if the variable is not to appear in sysfs, or 0444
* for world-readable, 0644 for root-writable, etc. Note that if it
* is writable, you may need to use kparam_block_sysfs_write() around
* accesses (esp. charp, which can be kfreed when it changes).
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 3ab0749d6875..f2fc82c14c97 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2797,7 +2797,7 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
* must call this function to return the skb back to the stack, with
* or without a timestamp.
*
- * @skb: clone of the the original outgoing packet
+ * @skb: clone of the original outgoing packet
* @hwtstamps: hardware time stamps, may be NULL if not available
*
*/
diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h
index 94e5ed64dc6d..e9a8d524ab06 100644
--- a/include/net/caif/caif_layer.h
+++ b/include/net/caif/caif_layer.h
@@ -184,7 +184,7 @@ struct cflayer {
* CAIF packet downwards in the stack.
* Packet handling rules:
* - The CAIF packet (cfpkt) ownership is passed to the
- * transmit function. This means that the the packet
+ * transmit function. This means that the packet
* cannot be accessed after passing it to the below
* layer using dn->transmit().
*
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 8eea35d32a75..951d1c2fe664 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -100,7 +100,7 @@ struct rt6_info {
struct in6_addr rt6i_gateway;
/* Multipath routes:
- * siblings is a list of rt6_info that have the the same metric/weight,
+ * siblings is a list of rt6_info that have the same metric/weight,
* destination, but not the same gateway. nsiblings is just a cache
* to speed up lookup.
*/
diff --git a/include/net/wimax.h b/include/net/wimax.h
index c52b68577cb0..c9705a3eb3b7 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -43,7 +43,7 @@
*
* USAGE
*
- * Embed a `struct wimax_dev` at the beginning of the the device's
+ * Embed a `struct wimax_dev` at the beginning of the device's
* private structure, initialize and register it. For details, see
* `struct wimax_dev`s documentation.
*
diff --git a/include/uapi/asm-generic/fcntl.h b/include/uapi/asm-generic/fcntl.h
index 7543b3e51331..3c8f396825b8 100644
--- a/include/uapi/asm-generic/fcntl.h
+++ b/include/uapi/asm-generic/fcntl.h
@@ -142,7 +142,7 @@
* record locks, but are "owned" by the open file description, not the
* process. This means that they are inherited across fork() like BSD (flock)
* locks, and they are only released automatically when the last reference to
- * the the open file against which they were acquired is put.
+ * the open file against which they were acquired is put.
*/
#define F_OFD_GETLK 36
#define F_OFD_SETLK 37
diff --git a/init/Kconfig b/init/Kconfig
index 3ee28ae02cc8..59255136af34 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -861,8 +861,8 @@ config LOG_CPU_MAX_BUF_SHIFT
used as it forces an exact (power of two) size of the ring buffer.
The number of possible CPUs is used for this computation ignoring
- hotplugging making the compuation optimal for the the worst case
- scenerio while allowing a simple algorithm to be used from bootup.
+ hotplugging making the computation optimal for the worst case
+ scenario while allowing a simple algorithm to be used from bootup.
Examples shift values and their meaning:
17 => 128 KB for each CPU
diff --git a/init/main.c b/init/main.c
index 800a0daede7e..ba9cbd64b716 100644
--- a/init/main.c
+++ b/init/main.c
@@ -512,7 +512,7 @@ asmlinkage __visible void __init start_kernel(void)
debug_objects_early_init();
/*
- * Set up the the initial canary ASAP:
+ * Set up the initial canary ASAP:
*/
boot_init_stack_canary();
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 9019f15deab2..6e82ca9e2735 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -17,7 +17,7 @@
#ifdef HAVE_JUMP_LABEL
-/* mutex to protect coming/going of the the jump_label table */
+/* mutex to protect coming/going of the jump_label table */
static DEFINE_MUTEX(jump_label_mutex);
void jump_label_lock(void)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index ced2b84b1cb7..060342f1e729 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2872,7 +2872,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
- * with as many of the the *youngest* kmsg records that fit into it.
+ * with as many of the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
diff --git a/kernel/smp.c b/kernel/smp.c
index f38a1e692259..2a2865ab3ec6 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -623,7 +623,7 @@ EXPORT_SYMBOL(on_each_cpu_mask);
* for all the required CPUs to finish. This may include the local
* processor.
* @cond_func: A callback function that is passed a cpu id and
- * the the info parameter. The function is called
+ * the info parameter. The function is called
* with preemption disabled. The function should
* return a blooean value indicating whether to IPI
* the specified CPU.
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 2d75c94ae87d..f3b69288737f 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2881,7 +2881,7 @@ rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
* This function lets the user discard an event in the ring buffer
* and then that event will not be read later.
*
- * This function only works if it is called before the the item has been
+ * This function only works if it is called before the item has been
* committed. It will try to free the event from the ring buffer
* if another event has not been added behind it.
*
diff --git a/lib/dynamic_queue_limits.c b/lib/dynamic_queue_limits.c
index 0777c5a45fa0..2ad6fc394f07 100644
--- a/lib/dynamic_queue_limits.c
+++ b/lib/dynamic_queue_limits.c
@@ -60,7 +60,7 @@ void dql_completed(struct dql *dql, unsigned int count)
* the whole interval (the check above).
*
* If there is slack, the amount of execess data queued above
- * the the amount needed to prevent starvation, the queue limit
+ * the amount needed to prevent starvation, the queue limit
* can be decreased. To avoid hysteresis we consider the
* minimum amount of slack found over several iterations of the
* completion routine.
diff --git a/lib/earlycpio.c b/lib/earlycpio.c
index 3eb3e4722b8e..9d4da0a6a6ed 100644
--- a/lib/earlycpio.c
+++ b/lib/earlycpio.c
@@ -50,7 +50,7 @@ enum cpio_fields {
/**
* cpio_data find_cpio_data - Search for files in an uncompressed cpio
* @path: The directory to search for, including a slash at the end
- * @data: Pointer to the the cpio archive or a header inside
+ * @data: Pointer to the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @nextoff: When a matching file is found, this is the offset from the
* beginning of the cpio to the beginning of the next file, not the
diff --git a/lib/syscall.c b/lib/syscall.c
index e30e03932480..624d80430969 100644
--- a/lib/syscall.c
+++ b/lib/syscall.c
@@ -31,7 +31,7 @@ static int collect_syscall(struct task_struct *target, long *callno,
* @pc: filled with user PC
*
* If @target is blocked in a system call, returns zero with *@callno
- * set to the the call's number and @args filled in with its arguments.
+ * set to the call's number and @args filled in with its arguments.
* Registers not used for system call arguments may not be available and
* it is not kosher to use &struct user_regset calls while the system
* call is still in progress. Note we may get this result if @target
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 9fd722769927..37a949b7466f 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1308,7 +1308,7 @@ static void return_unused_surplus_pages(struct hstate *h,
* evenly across all nodes with memory. Iterate across these nodes
* until we can no longer free unreserved surplus pages. This occurs
* when the nodes with surplus pages have no free pages.
- * free_pool_huge_page() will balance the the freed pages across the
+ * free_pool_huge_page() will balance the freed pages across the
* on-line nodes with memory and will handle the hstate accounting.
*/
while (nr_pages--) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 736d8e1b6381..b8e09f18934f 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4217,7 +4217,7 @@ static int zone_batchsize(struct zone *zone)
* locking.
*
* Any new users of pcp->batch and pcp->high should ensure they can cope with
- * those fields changing asynchronously (acording the the above rule).
+ * those fields changing asynchronously (according to the above rule).
*
* mutex_is_locked(&pcp_batch_high_lock) required when calling this function
* outside of boot time (or some other assurance that no concurrent updaters
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index b9517bd17190..dcd81626850c 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -972,7 +972,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
return 0;
}
-/* Encrypt the the link */
+/* Encrypt the link */
static void hci_conn_encrypt(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index cb05d7f16a34..c3677d01e751 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1674,7 +1674,7 @@ static void hci_init3_req(struct hci_request *req, unsigned long opt)
* Delete Stored Link Key command. They are clearly indicating its
* absence in the bit mask of supported commands.
*
- * Check the supported commands and only if the the command is marked
+ * Check the supported commands and only if the command is marked
* as supported send it. If not supported assume that the controller
* does not have actual support for stored link keys which makes this
* command redundant anyway.
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 33a140e15834..c964855b0248 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -146,7 +146,7 @@ int eth_rebuild_header(struct sk_buff *skb)
EXPORT_SYMBOL(eth_rebuild_header);
/**
- * eth_get_headlen - determine the the length of header for an ethernet frame
+ * eth_get_headlen - determine the length of header for an ethernet frame
* @data: pointer to start of frame
* @len: total length of frame
*
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index a88b8524846e..9d83a2e05baf 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1349,7 +1349,7 @@ static void sctp_select_active_and_retran_path(struct sctp_association *asoc)
}
/* We did not find anything useful for a possible retransmission
- * path; either primary path that we found is the the same as
+ * path; either primary path that we found is the same as
* the current one, or we didn't generally find an active one.
*/
if (trans_sec == NULL)
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index 158701da2d31..f0424e16beb7 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -199,7 +199,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3;
max = asoc->frag_point;
- /* If the the peer requested that we authenticate DATA chunks
+ /* If the peer requested that we authenticate DATA chunks
* we need to account for bundling of the AUTH chunks along with
* DATA.
*/
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 6f6b829c9e8e..1ef370a9f675 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -190,7 +190,7 @@ void rpc_destroy_generic_auth(void)
}
/*
- * Test the the current time (now) against the underlying credential key expiry
+ * Test the current time (now) against the underlying credential key expiry
* minus a timeout and setup notification.
*
* The normal case:
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 7d730543f243..53d5e7a8753b 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
* @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
* %WIMAX_RF_OFF radio off.
*
- * Reports changes in the software RF switch state to the the WiMAX
+ * Reports changes in the software RF switch state to the WiMAX
* stack.
*
* The main use is during initialization, so the driver can query the
diff --git a/scripts/coccinelle/misc/badty.cocci b/scripts/coccinelle/misc/badty.cocci
index 2fc06fc71927..7bde383f577b 100644
--- a/scripts/coccinelle/misc/badty.cocci
+++ b/scripts/coccinelle/misc/badty.cocci
@@ -3,7 +3,7 @@
//# This makes an effort to find cases where the argument to sizeof is wrong
//# in memory allocation functions by checking the type of the allocated memory
//# when it is a double pointer and ensuring the sizeof argument takes a pointer
-//# to the the memory being allocated. There are false positives in cases the
+//# to the memory being allocated. There are false positives in cases the
//# sizeof argument is not used in constructing the return value. The result
//# may need some reformatting.
//
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index db40fa04cd51..9eb8c74b69a1 100755
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in
kernel/trace/trace_functions.c
The resulted trace is processed into a tree to produce a more human
view of the call stack by drawing textual but hierarchical tree of
-calls. Only the functions's names and the the call time are provided.
+calls. Only the functions's names and the call time are provided.
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
index 3064c6ced87c..7b9769e7985a 100644
--- a/security/apparmor/context.c
+++ b/security/apparmor/context.c
@@ -13,7 +13,7 @@
* License.
*
*
- * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * AppArmor sets confinement on every task, via the aa_task_cxt and
* the aa_task_cxt.profile, both of which are required and are not allowed
* to be NULL. The aa_task_cxt is not reference counted and is unique
* to each cred (which is reference count). The profile pointed to by
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index eff88a5f5d40..50b40f78fc0f 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -476,7 +476,7 @@ error:
* keyring, otherwise replace the link to the matching key with a link to the
* new key.
*
- * The key must grant the caller Link permission and the the keyring must grant
+ * The key must grant the caller Link permission and the keyring must grant
* the caller Write permission. Furthermore, if an additional link is created,
* the keyring's quota will be extended.
*
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 15e0089492f7..e0e4118e0d23 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -5015,7 +5015,7 @@ EXPORT_SYMBOL_GPL(snd_hda_power_save);
* @nid: NID to check / update
*
* Check whether the given NID is in the amp list. If it's in the list,
- * check the current AMP status, and update the the power-status according
+ * check the current AMP status, and update the power-status according
* to the mute status.
*
* This function is supposed to be set or called from the check_power_status
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 4f6413e01c13..a4b23c4105f8 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -855,7 +855,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec,
static struct snd_kcontrol_new beep_vol_ctl =
HDA_CODEC_VOLUME(NULL, 0, 0, 0);
- /* check for mute support for the the amp */
+ /* check for mute support for the amp */
if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
const struct snd_kcontrol_new *temp;
if (spec->anabeep_nid == nid)
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index f3b491aa3e22..df5cb3b4b6e2 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -31,7 +31,7 @@
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
- * sampling rate. That means the the FPGA doubles the
+ * sampling rate. That means that the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index bddee30a4bc7..eaac777ee91d 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -694,7 +694,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int source)
u64 Kpart;
unsigned int K, Ndiv, Nmod, target;
- /* The the PLL output is always 98.304MHz. */
+ /* The PLL output is always 98.304MHz. */
target = 98304000;
/* If the input frequency is over 14.4MHz then scale it down. */
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index a609aafc994d..3c1c7b71e69b 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -164,7 +164,7 @@ static void fsl_dma_abort_stream(struct snd_pcm_substream *substream)
/**
* fsl_dma_update_pointers - update LD pointers to point to the next period
*
- * As each period is completed, this function changes the the link
+ * As each period is completed, this function changes the link
* descriptor pointers for that period to point to the next period.
*/
static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private)
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index b2c3d0d5dca3..8dc8cc9b8348 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -615,7 +615,7 @@ A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. The DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index b3b8abae62b8..6ba27f21847c 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -196,7 +196,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
- period being the hist entry period value
- - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option
+ - WEIGHT-A/WEIGHT-B being user supplied weights in the '-c' option
behind ':' separator like '-c wdiff:1,2'.
- WIEGHT-A being the weight of the data file
- WIEGHT-B being the weight of the baseline data file
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index 56bfb523c5bb..6940d8849434 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -35,9 +35,9 @@ The \fB-c MSR#\fP option includes the delta of the specified 32-bit MSR counter.
.PP
The \fB-C MSR#\fP option includes the delta of the specified 64-bit MSR counter.
.PP
-The \fB-m MSR#\fP option includes the the specified 32-bit MSR value.
+The \fB-m MSR#\fP option includes the specified 32-bit MSR value.
.PP
-The \fB-M MSR#\fP option includes the the specified 64-bit MSR value.
+The \fB-M MSR#\fP option includes the specified 64-bit MSR value.
.PP
The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
The default is 5 seconds.
diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
index fd7e9e9d6f4a..1aa7faa0e0e0 100644
--- a/tools/thermal/tmon/pid.c
+++ b/tools/thermal/tmon/pid.c
@@ -38,7 +38,7 @@
/**************************************************************************
* PID (Proportional-Integral-Derivative) controller is commonly used in
- * linear control system, consider the the process.
+ * linear control system, consider the process.
* G(s) = U(s)/E(s)
* kp = proportional gain
* ki = integral gain
--
1.9.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-16 12:35 ` Michael Opdenacker
2014-10-16 12:39 ` Michael Opdenacker
@ 2014-10-16 19:38 ` Michael Opdenacker
2014-10-16 19:42 ` Michael Opdenacker
1 sibling, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2014-10-16 19:38 UTC (permalink / raw)
To: trivial
Cc: Eduardo Valentin, rdunlap, joe, akpm, arend, gregkh,
linux-kernel, torvalds
On 10/16/2014 02:35 PM, Michael Opdenacker wrote:
> Greetings,
>
> On 10/03/2014 12:37 AM, Eduardo Valentin wrote:
>
>> On Tmon behalf:
>>
>> Acked-by: Eduardo Valentin <edubezval@gmail.com>
> Any chance to get this perged before the end of the current merge window
> (Linus said it would last until sometime next week)? I'm posting a new
> update with fixes for new issues that accumulated... Otherwise, there
> will be even more the next time, and current reviews may get obsolete.
>
> And I'd also hate to have to send commits to individual maintainers,
> polluting the history tree with loads of commits for the same trivial
> change...
As I was advised, I will resent once more and copy Linus this time, in
case he is available to help with this ever-growing treewide patch.
Michael.
--
Michael Opdenacker, CEO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
+33 484 258 098
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-16 19:38 ` Michael Opdenacker
@ 2014-10-16 19:42 ` Michael Opdenacker
2015-03-27 1:55 ` Michael Opdenacker
0 siblings, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2014-10-16 19:42 UTC (permalink / raw)
To: edubezval, rdunlap, joe, akpm, arend, gregkh, torvalds
Cc: linux-kernel, Michael Opdenacker
Fix all occurrences of "the the ", and occasionally "in in ",
in the source code, comments and documentation.
The replacement couldn't be automated because sometimes
the first "the" was meant to be another word.
Example: "according the the"
meaning: "according to the"
Note that I sometimes took the opportunity to fix
other spelling issues or typos in the same sentences,
and to reformat some comments impacted by the changes.
I also fixed a few checkpatch errors in the same
lines, but not all of them (should be addressed by
separate patches).
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Reviewed-by: rdunlap@infradead.org
Acked-by: Eduardo Valentin <edubezval@gmail.com>
---
Documentation/ABI/testing/sysfs-class-cxl | 4 ++--
Documentation/ABI/testing/sysfs-devices-memory | 2 +-
Documentation/DocBook/media/v4l/controls.xml | 2 +-
Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
Documentation/devicetree/bindings/arm/msm/timer.txt | 2 +-
.../devicetree/bindings/ata/cavium-compact-flash.txt | 2 +-
Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt | 2 +-
Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt | 2 +-
Documentation/devicetree/bindings/mtd/fsmc-nand.txt | 2 +-
.../devicetree/bindings/net/broadcom-systemport.txt | 2 +-
.../devicetree/bindings/power/rockchip-io-domain.txt | 2 +-
Documentation/filesystems/autofs4-mount-control.txt | 4 ++--
Documentation/phy.txt | 2 +-
Documentation/vm/unevictable-lru.txt | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/unwind.h | 2 +-
arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
arch/arm/mach-pxa/stargate2.c | 2 +-
arch/arm64/crypto/aes-neon.S | 2 +-
arch/blackfin/mach-common/entry.S | 2 +-
arch/c6x/platforms/cache.c | 2 +-
arch/ia64/include/asm/spinlock.h | 2 +-
arch/ia64/include/asm/uv/uv_hub.h | 2 +-
arch/m68k/coldfire/intc-2.c | 2 +-
arch/metag/kernel/process.c | 2 +-
arch/microblaze/kernel/entry.S | 2 +-
arch/mips/alchemy/devboards/pm.c | 2 +-
arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
arch/mips/include/asm/spinlock.h | 2 +-
arch/mips/kvm/mips.c | 2 +-
arch/mips/mm/c-octeon.c | 4 ++--
arch/mips/netlogic/xlr/fmn.c | 2 +-
arch/powerpc/include/asm/cache.h | 2 +-
arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
arch/powerpc/kernel/head_64.S | 2 +-
arch/powerpc/mm/gup.c | 2 +-
arch/powerpc/mm/hugetlbpage.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/platforms/chrp/setup.c | 2 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
arch/s390/kernel/perf_cpum_sf.c | 2 +-
arch/s390/mm/gup.c | 2 +-
arch/sparc/kernel/pci.c | 2 +-
arch/sparc/mm/gup.c | 2 +-
arch/tile/include/asm/irqflags.h | 2 +-
arch/tile/include/gxio/trio.h | 2 +-
arch/tile/kernel/single_step.c | 2 +-
arch/x86/include/asm/spinlock.h | 2 +-
arch/x86/include/asm/uv/uv_hub.h | 2 +-
arch/x86/kvm/x86.c | 2 +-
arch/x86/mm/gup.c | 4 ++--
arch/x86/xen/setup.c | 2 +-
arch/xtensa/include/asm/initialize_mmu.h | 2 +-
arch/xtensa/kernel/entry.S | 12 ++++++------
crypto/asymmetric_keys/pkcs7_parser.h | 2 +-
drivers/acpi/acpica/accommon.h | 2 +-
drivers/acpi/acpica/tbfadt.c | 2 +-
drivers/char/apm-emulation.c | 2 +-
drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
drivers/cpuidle/driver.c | 2 +-
drivers/crypto/picoxcell_crypto.c | 2 +-
drivers/crypto/ux500/hash/hash_core.c | 2 +-
drivers/gpio/gpio-ich.c | 2 +-
drivers/gpio/gpio-sch.c | 4 ++--
drivers/gpu/drm/drm_mm.c | 4 ++--
drivers/gpu/drm/i915/i915_gem.c | 2 +-
drivers/gpu/drm/i915/i915_gem_userptr.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 4 ++--
drivers/gpu/drm/radeon/atombios.h | 4 ++--
drivers/gpu/drm/radeon/r300_reg.h | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 2 +-
drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
drivers/gpu/drm/radeon/radeon_vm.c | 4 ++--
drivers/hv/channel.c | 4 ++--
drivers/hv/vmbus_drv.c | 4 ++--
drivers/hwmon/pmbus/ucd9200.c | 2 +-
drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
drivers/infiniband/hw/qib/qib.h | 2 +-
drivers/input/mouse/gpio_mouse.c | 2 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
drivers/lguest/core.c | 2 +-
drivers/media/dvb-frontends/tda1002x.h | 2 +-
drivers/media/dvb-frontends/tda10048.c | 2 +-
drivers/media/pci/cx88/cx88-dsp.c | 2 +-
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/saa7164/saa7164-core.c | 2 +-
drivers/media/platform/davinci/vpbe.c | 2 +-
drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
drivers/media/usb/dvb-usb/friio.c | 2 +-
drivers/media/usb/dvb-usb/friio.h | 2 +-
drivers/media/usb/gspca/finepix.c | 2 +-
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 2 +-
drivers/memory/emif.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/mfd/db8500-prcmu.c | 2 +-
drivers/misc/mic/bus/mic_bus.c | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/ubi/ubi.h | 4 ++--
drivers/mtd/ubi/wl.c | 2 +-
drivers/net/can/xilinx_can.c | 2 +-
drivers/net/ethernet/agere/et131x.c | 2 +-
drivers/net/ethernet/calxeda/xgmac.c | 2 +-
drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
drivers/net/ethernet/intel/fm10k/fm10k_mbx.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
drivers/net/wimax/i2400m/i2400m.h | 4 ++--
drivers/net/wimax/i2400m/rx.c | 2 +-
drivers/net/wimax/i2400m/tx.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/wcn36xx/hal.h | 8 ++++----
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++--
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 ++--
drivers/net/wireless/mwifiex/debugfs.c | 2 +-
drivers/net/wireless/rsi/rsi_91x_sdio.c | 4 ++--
drivers/net/wireless/ti/wl1251/acx.h | 2 +-
drivers/of/base.c | 2 +-
drivers/pci/hotplug/acpiphp_glue.c | 2 +-
drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 2 +-
drivers/pinctrl/pinctrl-at91.c | 2 +-
drivers/power/power_supply_sysfs.c | 5 +++--
drivers/rtc/rtc-rs5c372.c | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 6 +++---
drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++--
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/remote_device.h | 2 +-
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/spi/spi-ppc4xx.c | 2 +-
drivers/staging/android/ion/ion.c | 2 +-
drivers/staging/android/uapi/binder.h | 2 +-
drivers/staging/comedi/drivers/amplc_pci230.c | 2 +-
drivers/staging/lustre/lustre/llite/file.c | 2 +-
drivers/staging/lustre/lustre/ptlrpc/pinger.c | 2 +-
drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/rtl8712/rtl871x_cmd.c | 2 +-
drivers/staging/rtl8723au/core/rtw_cmd.c | 2 +-
.../staging/unisys/common-spar/include/channels/iochannel.h | 4 ++--
.../unisys/common-spar/include/channels/vbuschannel.h | 6 +++---
drivers/staging/unisys/virtpci/virtpci.c | 2 +-
drivers/target/target_core_alua.c | 2 +-
drivers/thunderbolt/ctl.h | 2 +-
drivers/usb/host/max3421-hcd.c | 3 +--
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/mos7720.c | 2 +-
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/uwb/drp-ie.c | 2 +-
drivers/video/fbdev/omap/sossi.c | 2 +-
drivers/video/fbdev/sis/sis_accel.c | 2 +-
fs/autofs4/dev-ioctl.c | 2 +-
fs/btrfs/dev-replace.c | 2 +-
fs/btrfs/send.c | 2 +-
fs/btrfs/tree-log.c | 2 +-
fs/dcache.c | 4 ++--
fs/ecryptfs/keystore.c | 2 +-
fs/ext2/ext2.h | 2 +-
fs/ext4/inline.c | 4 ++--
fs/f2fs/segment.h | 2 +-
fs/kernfs/file.c | 2 +-
fs/ocfs2/localalloc.c | 2 +-
fs/xfs/xfs_export.c | 2 +-
include/drm/drm_rect.h | 2 +-
include/linux/mic_bus.h | 2 +-
include/linux/mm.h | 2 +-
include/linux/moduleparam.h | 2 +-
include/linux/skbuff.h | 2 +-
include/net/caif/caif_layer.h | 2 +-
include/net/ip6_fib.h | 2 +-
include/net/wimax.h | 2 +-
include/uapi/asm-generic/fcntl.h | 2 +-
init/Kconfig | 4 ++--
init/main.c | 2 +-
kernel/jump_label.c | 2 +-
kernel/printk/printk.c | 2 +-
kernel/smp.c | 2 +-
kernel/trace/ring_buffer.c | 2 +-
lib/dynamic_queue_limits.c | 2 +-
lib/earlycpio.c | 2 +-
lib/syscall.c | 2 +-
mm/hugetlb.c | 2 +-
mm/page_alloc.c | 2 +-
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/hci_core.c | 2 +-
net/ethernet/eth.c | 2 +-
net/sctp/associola.c | 2 +-
net/sctp/chunk.c | 2 +-
net/sunrpc/auth_generic.c | 2 +-
net/wimax/op-rfkill.c | 2 +-
scripts/coccinelle/misc/badty.cocci | 2 +-
scripts/tracing/draw_functrace.py | 2 +-
security/apparmor/context.c | 2 +-
security/keys/keyctl.c | 2 +-
sound/pci/hda/hda_codec.c | 2 +-
sound/pci/hda/patch_sigmatel.c | 2 +-
sound/pci/ice1712/prodigy192.c | 2 +-
sound/soc/codecs/wm9713.c | 2 +-
sound/soc/fsl/fsl_dma.c | 2 +-
sound/sparc/dbri.c | 2 +-
tools/perf/Documentation/perf-diff.txt | 2 +-
tools/power/x86/turbostat/turbostat.8 | 4 ++--
tools/thermal/tmon/pid.c | 2 +-
229 files changed, 271 insertions(+), 271 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index 554405ec1955..9d5902e9d674 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -71,8 +71,8 @@ What: /sys/class/cxl/<afu>/api_version_com
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
- Decimal value of the the lowest version of the userspace API
- this this kernel supports.
+ Decimal value of the lowest version of the userspace API
+ this kernel supports.
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index deef3b5723cf..9767745b99bd 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -45,7 +45,7 @@ Description:
The file /sys/devices/system/memory/memoryX/state
is read-write. When read, its contents show the
online/offline state of the memory section. When written,
- root can toggle the the online/offline state of a removable
+ root can toggle the online/offline state of a removable
memory section (see removable file description above)
using the following commands.
# echo online > /sys/devices/system/memory/memoryX/state
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index e013e4bf244c..324efa8042f9 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3415,7 +3415,7 @@ giving priority to the center of the metered area.</entry>
<row>
<entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant> </entry>
<entry>A multi-zone metering. The light intensity is measured
-in several points of the frame and the the results are combined. The
+in several points of the frame and the results are combined. The
algorithm of the zones selection and their significance in calculating the
final value is device dependent.</entry>
</row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
index f4e28e7d4751..721728745407 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
@@ -267,7 +267,7 @@ is intended for still imaging applications. The idea is to get the
best possible image quality that the hardware can deliver. It is not
defined how the driver writer may achieve that; it will depend on the
hardware and the ingenuity of the driver writer. High quality mode is
-a different mode from the the regular motion video capture modes. In
+a different mode from the regular motion video capture modes. In
high quality mode:<itemizedlist>
<listitem>
<para>The driver may be able to capture higher
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
index c6ef8f13dc7e..74607b6c1117 100644
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -8,7 +8,7 @@ Properties:
"qcom,kpss-timer" - krait subsystem
"qcom,scss-timer" - scorpion subsystem
-- interrupts : Interrupts for the the debug timer, the first general purpose
+- interrupts : Interrupts for the debug timer, the first general purpose
timer, and optionally a second general purpose timer in that
order.
diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
index 93986a5a8018..3bacc8e0931e 100644
--- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
+++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -9,7 +9,7 @@ Properties:
Compatibility with many Cavium evaluation boards.
-- reg: The base address of the the CF chip select banks. Depending on
+- reg: The base address of the CF chip select banks. Depending on
the device configuration, there may be one or two banks.
- cavium,bus-width: The width of the connection to the CF devices. Valid
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
index d63194a2c848..ada4e2973323 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
@@ -39,7 +39,7 @@ Optional Properties:
- lines-initial-states: Bitmask that specifies the initial state of each
line. When a bit is set to zero, the corresponding line will be initialized to
the input (pulled-up) state. When the bit is set to one, the line will be
- initialized the the low-level output state. If the property is not specified
+ initialized the low-level output state. If the property is not specified
all lines will be initialized to the input state.
The I/O expander can detect input state changes, and thus optionally act as
diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
index d9ee909d2b78..d71258e2d456 100644
--- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
@@ -59,7 +59,7 @@ Optional properties:
Each child node represents one channel and has the following
properties:
Required properties:
- * reg: Pair of pins the the channel is connected to.
+ * reg: Pair of pins the channel is connected to.
0: VP/VN
1: VAUXP[0]/VAUXN[0]
2: VAUXP[1]/VAUXN[1]
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index ec42935f3908..5235cbc551b0 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -9,7 +9,7 @@ Required properties:
Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width
defaults to 1 byte
-- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+- nand-skip-bbtscan: Indicates the BBT scanning should be skipped
- timings: array of 6 bytes for NAND timings. The meanings of these bytes
are:
byte 0 TCLR : CLE to RE delay in number of AHB clock cycles, only 4 bits
diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
index aa7ad622259d..877da34145b0 100644
--- a/Documentation/devicetree/bindings/net/broadcom-systemport.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
@@ -3,7 +3,7 @@
Required properties:
- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the the rx
+- interrupts: interrupts for the device, first cell must be for the rx
interrupts, and the second cell should be for the transmit queues. An
optional third interrupt cell for Wake-on-LAN can be specified
- local-mac-address: Ethernet MAC address (48 bits) of this adapter
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
index 6fbf6e7ecde6..4679bde972c6 100644
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
@@ -37,7 +37,7 @@ Required properties:
You specify supplies using the standard regulator bindings by including
-a phandle the the relevant regulator. All specified supplies must be able
+a phandle to the relevant regulator. All specified supplies must be able
to report their voltage. The IO Voltage Domain for any non-specified
supplies will be not be touched.
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index aff22113a986..e54896427b4a 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -373,7 +373,7 @@ variation uses the path and optionally arg1 set to an autofs mount type.
The call returns 1 if this is a mount point and sets arg1 to the device
number of the mount and field arg2 to the relevant super block magic
number (described below) or 0 if it isn't a mountpoint. In both cases
-the the device number (as returned by new_encode_dev()) is returned
+the device number (as returned by new_encode_dev()) is returned
in field arg1.
If supplied with a file descriptor we're looking for a specific mount,
@@ -387,7 +387,7 @@ is one or 0 if it isn't a mountpoint.
If a path is supplied (and the ioctlfd field is set to -1) then the path
is looked up and is checked to see if it is the root of a mount. If a
type is also given we are looking for a particular autofs mount and if
-a match isn't found a fail is returned. If the the located path is the
+a match isn't found a fail is returned. If the located path is the
root of a mount 1 is returned along with the super magic of the mount
or 0 otherwise.
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index c6594af94d25..27fb3656ec8e 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -87,7 +87,7 @@ should contain the phy name as given in the dt data and in the case of
non-dt boot, it should contain the label of the PHY. The two
devm_phy_get associates the device with the PHY using devres on
successful PHY get. On driver detach, release function is invoked on
-the the devres data and devres data is freed. phy_optional_get and
+the devres data and devres data is freed. phy_optional_get and
devm_phy_optional_get should be used when the phy is optional. These
two functions will never return -ENODEV, but instead returns NULL when
the phy cannot be found.
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index 744f82f86c58..441dd2266531 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -453,7 +453,7 @@ putback_lru_page() function to add migrated pages back to the LRU.
mmap(MAP_LOCKED) SYSTEM CALL HANDLING
-------------------------------------
-In addition the mlock()/mlockall() system calls, an application can request
+In addition to the mlock()/mlockall() system calls, an application can request
that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 89c4b5ccc68d..da43a1704033 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1930,7 +1930,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
+ appended to the device tree bootargs property.
endchoice
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index d1c3f3a71c94..4f697edd0bad 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -22,7 +22,7 @@
#ifndef __ASSEMBLY__
-/* Unwind reason code according the the ARM EABI documents */
+/* Unwind reason code according to the ARM EABI documents */
enum unwind_reason_code {
URC_OK = 0, /* operation completed successfully */
URC_CONTINUE_UNWIND = 8,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 716247ed9e0c..b1479ce8b4f1 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -753,7 +753,7 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
}
/**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * _init_main_clk - get a struct clk * for the hwmod's main functional clk
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
@@ -791,7 +791,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
}
/**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
@@ -835,7 +835,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
}
/**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 01de542432a6..6f92e75b6c35 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -423,7 +423,7 @@ static void __init imote2_stargate2_init(void)
}
#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
+/* As the imote2 doesn't currently have a conventional SD slot
* there is no option to hotplug cards, making all this rather simple
*/
static int imote2_mci_get_ro(struct device *dev)
diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S
index b93170e1cc93..d0f01cff23b3 100644
--- a/arch/arm64/crypto/aes-neon.S
+++ b/arch/arm64/crypto/aes-neon.S
@@ -47,7 +47,7 @@
prepare .LReverse_Sbox, .LReverse_ShiftRows, \temp
.endm
- /* apply SubBytes transformation using the the preloaded Sbox */
+ /* apply SubBytes transformation using the preloaded Sbox */
.macro sub_bytes, in
sub v9.16b, \in\().16b, v12.16b
tbl \in\().16b, {v16.16b-v19.16b}, \in\().16b
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 86b5a095c5a1..9c8612385e00 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -480,7 +480,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
#ifdef CONFIG_EXACT_HWERR
/* Make sure all pending read/writes complete. This will ensure any
* accesses which could cause hardware errors completes, and signal
- * the the hardware before we do something silly, like crash the
+ * the hardware before we do something silly, like crash the
* kernel. We don't need to work around anomaly 05000312, since
* we are already atomic
*/
diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c
index 86318a16a252..dc21f94aaaaf 100644
--- a/arch/c6x/platforms/cache.c
+++ b/arch/c6x/platforms/cache.c
@@ -437,7 +437,7 @@ void __init c6x_cache_init(void)
if (!cache_base)
return;
- /* Set L2 caches on the the whole L2 SRAM memory */
+ /* Set L2 caches on the whole L2 SRAM memory */
L2_cache_set_mode(L2MODE_SIZE);
/* Enable L1 */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 45698cd15b7b..bd6ea40f3ef9 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -23,7 +23,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
* The pad bits in the middle are used to prevent the next_ticket number
* overflowing into the now_serving number.
*
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index 2a88c7204e52..809ddb6896db 100644
--- a/arch/ia64/include/asm/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -257,7 +257,7 @@ static inline int uv_numa_blade_id(void)
return 0;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return 0;
diff --git a/arch/m68k/coldfire/intc-2.c b/arch/m68k/coldfire/intc-2.c
index 995093357c59..f74f0e473119 100644
--- a/arch/m68k/coldfire/intc-2.c
+++ b/arch/m68k/coldfire/intc-2.c
@@ -7,7 +7,7 @@
* family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
* controllers, and the 547x and 548x families which have only one of them.
*
- * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * The external 7 fixed interrupts are part of the Edge Port unit of these
* ColdFire parts. They can be configured as level or edge triggered.
*
* (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff986a23..30052da1f1a4 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -211,7 +211,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
/*
* Get a pointer to where the new child's register block should have
* been pushed.
- * The Meta's stack grows upwards, and the context is the the first
+ * The Meta's stack grows upwards, and the context is the first
* thing to be pushed by TBX (phew)
*/
*childregs = *current_pt_regs();
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 0536bc021cc6..b417be09196d 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -445,7 +445,7 @@ TRAP_return: /* Make global symbol for debugging */
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look like the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index bfeb8f3c0be6..203767dbeb64 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -16,7 +16,7 @@
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
* is to trigger a wakeup.
*/
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index df69bfd2b006..4ec669f5b0d4 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index)
* offsetof() to determine the offsets into packet headers.
* For example, offsetof(ethhdr, protocol) returns the offset
* of the ethernet protocol field. The bitmask selects which
- * bytes to include the the tag, with bit offset X selecting
+ * bytes to include in the tag, with bit offset X selecting
* byte at offset X from the beginning of the packet data.
* @len: Number of bytes to include. Usually this is the sizeof()
* the field.
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index 78d201fb6c87..b6f41f6b6c70 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -31,7 +31,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*/
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index e3b21e51ff7e..56e68844d90c 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -1153,7 +1153,7 @@ int __init kvm_mips_init(void)
* requires TLBs. The TLB handling code is statically linked with
* the rest of the kernel (tlb.c) to avoid the possibility of
* double faulting. The issue is that the TLB code references
- * routines that are part of the the KVM module, which are only
+ * routines that are part of the KVM module, which are only
* available once the module is loaded.
*/
kvm_mips_gfn_to_pfn = gfn_to_pfn;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 05b1d7cf9514..1647426364b9 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -350,7 +350,7 @@ static void co_cache_error_call_notifiers(unsigned long val)
}
/*
- * Called when the the exception is recoverable
+ * Called when the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -359,7 +359,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
}
/**
- * Called when the the exception is not recoverable
+ * Called when the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d428e8471eec..1d1eb1e10ae2 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -144,7 +144,7 @@ void xlr_percpu_fmn_init(void)
* For sending FMN messages, we need credits on the destination
* bucket. Program the credits this core has on the 128 possible
* destination buckets.
- * We cannot use a loop here, because the the first argument has
+ * We cannot use a loop here, because the first argument has
* to be a constant integer value.
*/
COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 34a05a1a990b..af6f17b32531 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -52,7 +52,7 @@ static inline void logmpp(u64 x)
/*
* For a snooping icache, we still need a dummy icbi to purge all the
* prefetched instructions from the ifetch buffers. We also need a sync
- * before the icbi to order the the actual stores to memory that might
+ * before the icbi to order the actual stores to memory that might
* have modified instructions with the icbi.
*/
#define PURGE_PREFETCHED_INS \
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index 334459ad145b..b3219b0ca2c4 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -246,7 +246,7 @@ static inline unsigned int ev_int_get_mask(unsigned int interrupt,
* ev_int_eoi - signal the end of interrupt processing
* @interrupt: the interrupt number
*
- * This function signals the end of processing for the the specified
+ * This function signals the end of processing for the specified
* interrupt, which must be the interrupt currently in service. By
* definition, this is also the highest-priority interrupt.
*
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index ac6432d9be46..a18702780733 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -30,7 +30,7 @@ struct arch_hw_breakpoint {
u16 len; /* length of the target data symbol */
};
-/* Note: Don't change the the first 6 bits below as they are in the same order
+/* Note: Don't change the first 6 bits below as they are in the same order
* as the dabr and dabrx.
*/
#define HW_BRK_TYPE_READ 0x01
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index d48125d0c048..01ecece4ca83 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -94,7 +94,7 @@ __secondary_hold_acknowledge:
#ifdef CONFIG_RELOCATABLE
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
- * is used by kexec-tools to keep the the kdump kernel in the
+ * is used by kexec-tools to keep the kdump kernel in the
* crash_kernel region. The loader is responsible for
* observing the alignment requirement.
*/
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index d8746684f606..a97b81d5cfa6 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -168,7 +168,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on powerpc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 7e70ae968e5f..bf66090de7cc 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -933,7 +933,7 @@ void flush_dcache_icache_hugepage(struct page *page)
* (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table
*
* So long as we atomically load page table pointers we are safe against teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 692998244d2c..a2ce00831362 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -9,7 +9,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * This file is a driver for the the General Purpose Timer (gpt) devices
+ * This file is a driver for the General Purpose Timer (gpt) devices
* found on the MPC5200 SoC. Each timer has an IO pin which can be used
* for GPIO or can be used to raise interrupts. The timer function can
* be used independently from the IO pin, or it can be used to control
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 5b77b1919fd2..b6281b22d9b7 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -251,7 +251,7 @@ static void briq_restart(char *cmd)
* Per default, input/output-device points to the keyboard/screen
* If no card is installed, the built-in serial port is used as a fallback.
* But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
- * the the built-in serial node. Instead, a /failsafe node is created.
+ * to the built-in serial node. Instead, a /failsafe node is created.
*/
static void chrp_init_early(void)
{
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 468a0f23c7f2..09f4e2caf18f 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1602,7 +1602,7 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
/*
* This function is supposed to be called on basis of PE from top
- * to bottom style. So the the I/O or MMIO segment assigned to
+ * to bottom style. So the I/O or MMIO segment assigned to
* parent PE could be overrided by its child PEs if necessary.
*/
static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index 08e761318c17..8bedb3c6211b 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1128,7 +1128,7 @@ static void debug_sample_entry(struct hws_combined_entry *sample,
* combined-sampling data entry consists of a basic- and a diagnostic-sampling
* data entry. The sampling function is determined by the flags in the perf
* event hardware structure. The function always works with a combined-sampling
- * data entry but ignores the the diagnostic portion if it is not available.
+ * data entry but ignores the diagnostic portion if it is not available.
*
* Note that the implementation focuses on basic-sampling data entries and, if
* such an entry is not valid, the entire combined-sampling data entry is
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 639fce464008..2f03d7badf95 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -187,7 +187,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* prevent the pagetables from being freed on s390.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f49478..ef36086d3db1 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -306,7 +306,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
+ * firmware can sample the value before the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index 1aed0432c64b..74ed2d607036 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -189,7 +189,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on sparc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_disable();
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 60d62a292fce..a9554b167e96 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -116,7 +116,7 @@
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
* Likewise, INTCTRL_K is removed and re-added during device
- * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * interrupts, as is the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
* to know our current state.
diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h
index df10a662cc25..50a3d5cbad20 100644
--- a/arch/tile/include/gxio/trio.h
+++ b/arch/tile/include/gxio/trio.h
@@ -206,7 +206,7 @@ typedef struct {
/* Initialize a TRIO context.
*
* This function allocates a TRIO "service domain" and maps the MMIO
- * registers into the the caller's VA space.
+ * registers into the caller's VA space.
*
* @param trio_index Which TRIO shim; Gx36 must pass 0.
* @param context Context object to be initialized.
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index 6cb2ce31b5a2..4a75a6be8fa0 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -277,7 +277,7 @@ P("\n");
/*
* Called after execve() has started the new image. This allows us
- * to reset the info state. Note that the the mmap'ed memory, if there
+ * to reset the info state. Note that the mmap'ed memory, if there
* was any, has already been unmapped by the exec.
*/
void single_step_execve(void)
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index 9295016485c9..78a40082f654 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -71,7 +71,7 @@ static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*
* We use an xadd covering *both* parts of the lock, to increment the tail and
* also load the position of the head, which takes care of memory ordering
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index a00ad8f2a657..3260b75fd427 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -512,7 +512,7 @@ static inline int uv_numa_blade_id(void)
return uv_hub_info->numa_blade_id;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return uv_cpu_to_blade[cpu];
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 34c8f94331f8..3f52b5743ee5 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7294,7 +7294,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
if (current->mm == kvm->mm) {
/*
* Free memory regions allocated on behalf of userspace,
- * unless the the memory map has changed due to process exit
+ * unless the memory map has changed due to process exit
* or fd copying.
*/
struct kvm_userspace_memory_region mem;
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 207d9aef662d..a1f84cebb9aa 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -288,7 +288,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
@@ -360,7 +360,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_disable();
pgdp = pgd_offset(mm, addr);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index af7216128d93..b2ab7e9dd3f1 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -686,7 +686,7 @@ char * __init xen_memory_setup(void)
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
- * We tried to make the the memblock_reserve more selective so
+ * We tried to make the memblock_reserve more selective so
* that it would be clear what region is reserved. Sadly we ran
* in the problem wherein on a 64-bit hypervisor with a 32-bit
* initial domain, the pt_base has the cr3 value which is not
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 600781edc8a3..2e1d20d0b71f 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -6,7 +6,7 @@
* For the new V3 MMU we remap the TLB from virtual == physical
* to the standard Linux mapping used in earlier MMU's.
*
- * The the MMU we also support a new configuration register that
+ * In the MMU we also support a new configuration register that
* specifies how the S32C1I instruction operates with the cache
* controller.
*
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 82bbfa5a05b3..94044cc958c2 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -384,7 +384,7 @@ common_exception:
/* Save optional registers. */
save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
-
+
#ifdef CONFIG_TRACE_IRQFLAGS
l32i a4, a1, PT_DEPC
/* Double exception means we came here with an exception
@@ -433,7 +433,7 @@ common_exception_return:
* We need to check some flags for signal handling and rescheduling,
* and have to restore WB and WS, extra states, and all registers
* in the register file that were in use in the user task.
- * Note that we don't disable interrupts here.
+ * Note that we don't disable interrupts here.
*/
_bbsi.l a4, TIF_NEED_RESCHED, 3f
@@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
* of the proper size instead.
*
* This algorithm simply backs out the register changes started by the user
- * excpetion handler, makes it appear that we have started a window underflow
+ * exception handler, makes it appear that we have started a window underflow
* by rotating the window back and then setting the old window base (OWB) in
* the 'ps' register with the rolled back window base. The 'movsp' instruction
* will be re-executed and this time since the next window frames is in the
* active AR registers it won't cause an exception.
*
* If the WindowUnderflow code gets a TLB miss the page will get mapped
- * the the partial windeowUnderflow will be handeled in the double exception
+ * and the partial window underflow will be handled in the double exception
* handler.
*
* Entry condition:
@@ -1567,8 +1567,8 @@ ENTRY(fast_second_level_miss)
2: /* Special case for cache aliasing.
* We (should) only get here if a clear_user_page, copy_user_page
- * or the aliased cache flush functions got preemptively interrupted
- * by another task. Re-establish temporary mapping to the
+ * or the aliased cache flush functions got preemptively interrupted
+ * by another task. Re-establish temporary mapping to the
* TLBTEMP_BASE areas.
*/
diff --git a/crypto/asymmetric_keys/pkcs7_parser.h b/crypto/asymmetric_keys/pkcs7_parser.h
index efc7dc9b8f9c..0e51bec18672 100644
--- a/crypto/asymmetric_keys/pkcs7_parser.h
+++ b/crypto/asymmetric_keys/pkcs7_parser.h
@@ -40,7 +40,7 @@ struct pkcs7_signed_info {
*
* This contains the generated digest of _either_ the Content Data or
* the Authenticated Attributes [RFC2315 9.3]. If the latter, one of
- * the attributes contains the digest of the the Content Data within
+ * the attributes contains the digest of the Content Data within
* it.
*/
struct public_key_signature sig;
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 6f1c616910ac..826a754954f3 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -47,7 +47,7 @@
/*
* Common set of includes for all ACPICA source files.
* We put them here because we don't want to duplicate them
- * in the the source code again and again.
+ * in the source code again and again.
*
* Note: The order of these include files is important.
*/
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 41519a958083..75e61da5d998 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -435,7 +435,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
* The 64-bit X fields are optional extensions to the original 32-bit FADT
* V1.0 fields. Even if they are present in the FADT, they are optional and
* are unused if the BIOS sets them to zero. Therefore, we must copy/expand
- * 32-bit V1.0 fields to the 64-bit X fields if the the 64-bit X field is
+ * 32-bit V1.0 fields to the 64-bit X fields if the 64-bit X field is
* originally zero.
*
* For ACPI 1.0 FADTs (that contain no 64-bit addresses), all 32-bit address
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index dd9dfa15e9d1..d086acf9562f 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -563,7 +563,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
wake_up_interruptible(&apm_waitqueue);
/*
- * Wait for the the suspend_acks_pending variable to drop to
+ * Wait for the suspend_acks_pending variable to drop to
* zero, meaning everybody acked the suspend event (or the
* process was killed.)
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 02225eb19cf6..619f3a30ec55 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -111,7 +111,7 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
}
/**
- * fifo_icap_set_read_size - Set the the size register.
+ * fifo_icap_set_read_size - Set the size register.
* @drvdata: a pointer to the drvdata.
* @data: the size of the following read transaction, in words.
**/
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index e431d11abf8d..231f0149c540 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -168,7 +168,7 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv)
/*
* Look for the timer stop flag in the different states, so that we know
* if the broadcast timer has to be set up. The loop is in the reverse
- * order, because usually one of the deeper states have this flag set.
+ * order, because usually one of the deeper states has this flag set.
*/
for (i = drv->state_count - 1; i >= 0 ; i--) {
if (drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP) {
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 5da5b98b8f29..60f2267c1350 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -53,7 +53,7 @@
#define CMD0_IRQ_THRESHOLD 1
/*
- * The timeout period (in jiffies) for a PDU. When the the number of PDUs in
+ * The timeout period (in jiffies) for a PDU. When the number of PDUs in
* flight is greater than the STAT_IRQ_THRESHOLD or 0 the timer is disabled.
* When there are packets in flight but lower than the threshold, we enable
* the timer and at expiry, attempt to remove any processed packets from the
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 1c73f4fbc252..2f2a4276a014 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -435,7 +435,7 @@ static int hash_get_device_data(struct hash_ctx *ctx,
* @keylen: The lengt of the key.
*
* Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the the hw design spec. Either due to incorrect info in the
+ * specified in the hw design spec. Either due to incorrect info in the
* spec or due to a bug in the hw.
*/
static void hash_hw_write_key(struct hash_device_data *device_data,
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 3784e81e7762..d548a717d5b9 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -471,7 +471,7 @@ static int ichx_gpio_probe(struct platform_device *pdev)
/*
* If necessary, determine the I/O address of ACPI/power management
- * registers which are needed to read the the GPE0 register for GPI pins
+ * registers which are needed to read the GPE0 register for GPI pins
* 0 - 15 on some chipsets.
*/
if (!ichx_priv.desc->uses_gpe0)
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 41e91d70301e..9b43e701db28 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -111,7 +111,7 @@ static int sch_gpio_core_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
@@ -201,7 +201,7 @@ static int sch_gpio_resume_direction_out(struct gpio_chip *gc,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 04a209e2b66d..ff92d4c5e379 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -529,12 +529,12 @@ EXPORT_SYMBOL(drm_mm_replace_node);
*
* The DRM range allocator supports this use-case through the scanning
* interfaces. First a scan operation needs to be initialized with
- * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The the driver adds
+ * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The driver adds
* objects to the roaster (probably by walking an LRU list, but this can be
* freely implemented) until a suitable hole is found or there's no further
* evitable object.
*
- * The the driver must walk through all objects again in exactly the reverse
+ * The driver must walk through all objects again in exactly the reverse
* order to restore the allocator state. Note that while the allocator is used
* in the scan mode no other operation is allowed.
*
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 28f91df2604d..6b33655226ed 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2387,7 +2387,7 @@ int __i915_add_request(struct intel_engine_cs *ring,
/* Whilst this request exists, batch_obj will be on the
* active_list, and so will hold the active reference. Only when this
- * request is retired will the the batch_obj be moved onto the
+ * request is retired will the batch_obj be moved onto the
* inactive_list and lose its active reference. Hence we do not need
* to explicitly hold another reference here.
*/
diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c
index d182058383a9..e6646df95744 100644
--- a/drivers/gpu/drm/i915/i915_gem_userptr.c
+++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
@@ -225,7 +225,7 @@ i915_mmu_notifier_add(struct drm_device *dev,
* either has cancelled gup work queued and we need to
* return back to the user to give time for the gup-workers
* to flush their object references upon which the object will
- * be removed from the interval-tree, or the the range is
+ * be removed from the interval-tree, or the range is
* still in use by another client and the overlap is invalid.
*
* If we do have an overlap, we cannot use the interval tree
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 507370513f3d..eb3e21942866 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2703,7 +2703,7 @@ void intel_display_handle_reset(struct drm_device *dev)
* will get its events and not get stuck.
*
* Also update the base address of all primary
- * planes to the the last fb to make sure we're
+ * planes to the last fb to make sure we're
* showing the correct fb after a reset.
*
* Need to make two loops over the crtcs so that we
@@ -11164,7 +11164,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
}
/* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
+ * update the output configuration. */
intel_modeset_update_state(dev, prepare_pipes);
if (dev_priv->display.modeset_global_resources)
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 92be50c39ffd..2be3040b28f1 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -2802,8 +2802,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t
ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 00c0d2ba22d3..36af5f14f622 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -353,7 +353,7 @@
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index f41cc1538e48..e66b086c2edc 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -379,7 +379,7 @@ void radeon_doorbell_free(struct radeon_device *rdev, u32 doorbell)
/*
* radeon_wb_*()
- * Writeback is the the method by which the the GPU updates special pages
+ * Writeback is the method by which the GPU updates special pages
* in memory with the status of certain GPU events (fences, ring pointers,
* etc.).
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 995167025282..f76b9c4f95ea 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -45,7 +45,7 @@
* for GPU/CPU synchronization. When the fence is written,
* it is expected that all buffers associated with that fence
* are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed. Whether
+ * that the relevant GPU caches have been flushed. Whether
* we use a scratch register or memory location depends on the asic
* and whether writeback is enabled.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c
index 4532cc76a0a6..37fca1da4ba1 100644
--- a/drivers/gpu/drm/radeon/radeon_vm.c
+++ b/drivers/gpu/drm/radeon/radeon_vm.c
@@ -40,8 +40,8 @@
* can be mapped as snooped (cached system pages) or unsnooped
* (uncached system pages).
* Each VM has an ID associated with it and there is a page table
- * associated with each VMID. When execting a command buffer,
- * the kernel tells the the ring what VMID to use for that command
+ * associated with each VMID. When executing a command buffer,
+ * the kernel tells the ring what VMID to use for that command
* buffer. VMIDs are allocated dynamically as commands are submitted.
* The userspace drivers maintain their own address space and the kernel
* sets up their pages tables accordingly when they submit their
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 433f72a1c006..2d60954c5247 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -573,7 +573,7 @@ EXPORT_SYMBOL_GPL(vmbus_close);
* vmbus_sendpacket() - Send the specified buffer on the given channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @requestid: Identifier of the request
* @type: Type of packet that is being send e.g. negotiate, time
* packet etc.
@@ -750,7 +750,7 @@ EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
* vmbus_recvpacket() - Retrieve the user packet on the specified channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @buffer_actual_len: The actual size of the data after it was received
* @requestid: Identifier of the request
*
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 4d6b26979fbd..5a358e591403 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -849,8 +849,8 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the information we
- * need from DSDT.
+ * VMBUS is an acpi enumerated device. Get the IRQ information
+ * from DSDT.
*/
static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index 033d6aca47d3..d41d7e3bf31c 100644
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -117,7 +117,7 @@ static int ucd9200_probe(struct i2c_client *client,
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
- * for the the phases of the rail.
+ * for the phases of the rail.
*/
for (i = 0; i < info->pages; i++) {
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 28cfe97cf1e9..231b54591e2b 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -87,7 +87,7 @@
* These 3 values (SDR and DDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
+ * are also the possible values for ipath_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define IPATH_IB_SDR 1
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index c00ae093b6f8..6b6499a690af 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -333,7 +333,7 @@ struct qib_verbs_txreq {
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for qib_link_speed_enabled and active
+ * are also the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 8c7d94200bdb..c1418e619f0c 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -17,7 +17,7 @@
/*
* Timer function which is run every scan_ms ms when the device is opened.
- * The dev input variable is set to the the input_dev pointer.
+ * The dev input variable is set to the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_polled_dev *dev)
{
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 114f3bcba1b0..24c15bfb2199 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1566,7 +1566,7 @@ reset_hfcsusb(struct hfcsusb *hw)
write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
((hw->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 6590558d1d31..010d3c6cd5f4 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -202,7 +202,7 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
/*:*/
/*H:030
- * Let's jump straight to the the main loop which runs the Guest.
+ * Let's jump straight to the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
* going around and around until something interesting happens.
*/
diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h
index e404b6e44802..ce0fb855c705 100644
--- a/drivers/media/dvb-frontends/tda1002x.h
+++ b/drivers/media/dvb-frontends/tda1002x.h
@@ -1,6 +1,6 @@
/*
TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index 71fb63299de7..17534ff576ca 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1134,7 +1134,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
state->pll_pfactor = 0;
}
- /* Establish any defaults the the user didn't pass */
+ /* Establish any defaults the user didn't pass */
tda10048_establish_defaults(&state->frontend);
/* Set the xtal and freq defaults */
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..1f8820f5f8c0 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -37,7 +37,7 @@
(compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
/* We calculate the baseband frequencies of the carrier and the pilot tones
- * based on the the sampling rate of the audio rds fifo. */
+ * based on the sampling rate of the audio rds fifo. */
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index 2ad65eb29832..00e0818abfc9 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -555,7 +555,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f)
reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94);
/* Okay, we've wasted time working out the correct value,
- but if we use it, it fouls the the window alignment.
+ but if we use it, it fouls the window alignment.
Fudge it to what we want... */
reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16));
reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16));
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index cc1be8a7a451..bee06f31869d 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -636,7 +636,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
}
/* Check that the hardware is accessible. If the status bytes are
- * 0xFF then the device is not accessible, the the IRQ belongs
+ * 0xFF then the device is not accessible, the IRQ belongs
* to another driver.
* 4 x u32 interrupt registers.
*/
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 33b9660b7f77..6ea16e20449d 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -316,7 +316,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
* vpbe_get_output - Get output
* @vpbe_dev - vpbe device ptr
*
- * return current vpbe output to the the index
+ * return current vpbe output to the index
*/
static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
{
diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 3d2babd5067a..b8181874a149 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -505,7 +505,7 @@ static int fimc_capture_open(struct file *file)
if (ret == 0 && vc->user_subdev_api && vc->inh_sensor_ctrls) {
/*
- * Recreate controls of the the video node to drop
+ * Recreate controls of the video node to drop
* any controls inherited from the sensor subdev.
*/
fimc_ctrls_delete(vc->ctx);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 72265e58ca60..2beb186d24ed 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1698,7 +1698,7 @@ void omap3isp_print_status(struct isp_device *isp)
* To solve this problem power management support is split into prepare/complete
* and suspend/resume operations. The pipelines are stopped in prepare() and the
* ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
- * resume(), and the the pipelines are restarted in complete().
+ * resume(), and the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not modelled explicitly
* yet.
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index d56f927fc31a..b5d2e805380d 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 474a17e4db0c..4c7f8fed8046 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h
index 0f461ca10cb9..82d19dcdebc0 100644
--- a/drivers/media/usb/dvb-usb/friio.h
+++ b/drivers/media/usb/dvb-usb/friio.h
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
index 52bdb569760b..414c1b752911 100644
--- a/drivers/media/usb/gspca/finepix.c
+++ b/drivers/media/usb/gspca/finepix.c
@@ -143,7 +143,7 @@ again:
* for, then it's the end of the
* frame. Sometimes the jpeg is not complete,
* but there's nothing we can do. We also end
- * here if the the jpeg ends right at the end
+ * here if the jpeg ends right at the end
* of the frame. */
gspca_frame_add(gspca_dev, LAST_PACKET,
data, len);
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 2e8c3afe4ec4..b7b5a1f630af 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1313,7 +1313,7 @@ static int tm6000_usb_probe(struct usb_interface *interface,
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
-/* check if the the device has the iso in endpoint at the correct place */
+/* check if the device has the iso in endpoint at the correct place */
if (!dev->isoc_in.endp) {
printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
rc = -ENODEV;
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 9ace520bb079..454ef64f836b 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1000,7 +1000,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
}
/* Synchronize to the input stream by waiting for the FID bit to be
- * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE.
* stream->last_fid is initialized to -1, so the first isochronous
* frame will always be in sync.
*
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index 9ccb19a435ef..fabf4f6b5d40 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -981,7 +981,7 @@ static void v4l_sanitize_format(struct v4l2_format *fmt)
/*
* The v4l2_pix_format structure has been extended with fields that were
* not previously required to be set to zero by applications. The priv
- * field, when set to a magic value, indicates the the extended fields
+ * field, when set to a magic value, indicates that the extended fields
* are valid. Otherwise they will contain undefined values. To simplify
* the API towards drivers zero the extended fields and set the priv
* field to the magic value when the extended pixel format structure
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 04644e7b42b1..303b322756c7 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -373,7 +373,7 @@ static const struct lpddr2_addressing *get_addressing_table(
}
/*
- * Find the the right timing table from the array of timing
+ * Find the right timing table from the array of timing
* tables of the device using DDR clock frequency
*/
static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 613231c16194..4591bd235a00 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
* @target: per target private data
* @sdev: SCSI device
*
- * Update the target negotiation parameters based on the the Inquiry
+ * Update the target negotiation parameters based on the Inquiry
* data, adapter capabilities, and NVRAM settings.
**/
static void
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 193cf168ba84..5d03af1f5103 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -898,7 +898,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
- * This function sets the the operating point of the ARM.
+ * This function sets the operating point of the ARM.
*/
int db8500_prcmu_set_arm_opp(u8 opp)
{
diff --git a/drivers/misc/mic/bus/mic_bus.c b/drivers/misc/mic/bus/mic_bus.c
index 961ae90aae47..1b15af8c5101 100644
--- a/drivers/misc/mic/bus/mic_bus.c
+++ b/drivers/misc/mic/bus/mic_bus.c
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ drivers/virtio/virtio.c
*/
#include <linux/slab.h>
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 913de07e577c..6482a9c4eb44 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -48,7 +48,7 @@
* kernel/user requirements.
*
* Blade percpu resources reserved for kernel use. These resources are
- * reserved whenever the the kernel context for the blade is loaded. Note
+ * reserved whenever the kernel context for the blade is loaded. Note
* that the kernel context is not guaranteed to be always available. It is
* loaded on demand & can be stolen by a user if the user demand exceeds the
* kernel demand. The kernel can always reload the kernel context but
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 95c894482fdd..f87520cfb787 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1594,7 +1594,7 @@ out_2:
* by xpc_notify_senders_of_disconnect_uv(), and to also get an
* error returned here will confuse them. Additionally, since
* in this case the channel is being disconnected we don't need
- * to put the the msg_slot back on the free list.
+ * to put the msg_slot back on the free list.
*/
if (cmpxchg(&msg_slot->func, func, NULL) != func) {
ret = xpSuccess;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 959cb9b70310..c5b1237ecb33 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -942,7 +942,7 @@ static uint8_t gpmi_read_byte(struct mtd_info *mtd)
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
- * because the the operations are the same.
+ * because the operations are the same.
*/
static void block_mark_swapping(struct gpmi_nand_data *this,
void *payload, void *auxiliary)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 320fc38fa2a1..ba2cd98a2d6c 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -252,7 +252,7 @@ struct ubi_fm_pool {
/**
* struct ubi_volume - UBI volume description data structure.
- * @dev: device object to make use of the the Linux device model
+ * @dev: device object to make use of the Linux device model
* @cdev: character device object to create character device
* @ubi: reference to the UBI device description object
* @vol_id: volume ID
@@ -380,7 +380,7 @@ struct ubi_debug_info {
/**
* struct ubi_device - UBI device description structure
- * @dev: UBI device object to use the the Linux device model
+ * @dev: UBI device object to use for the Linux device model
* @cdev: character device object to create character device
* @ubi_num: UBI device number
* @ubi_name: UBI device name
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 6654f191868e..c1271ed881c4 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -727,7 +727,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
/**
* sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
- * @e: the the physical eraseblock to erase
+ * @e: the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
*
* This function returns zero in case of success and a negative error code in
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 5e8b5609c067..ad5bfe8618a6 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -532,7 +532,7 @@ static int xcan_rx(struct net_device *ndev)
* @isr: interrupt status register value
*
* This is the CAN error interrupt and it will
- * check the the type of error and forward the error
+ * check the type of error and forward the error
* frame to upper layers.
*/
static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c
index 384dc163851b..1d7d13caae92 100644
--- a/drivers/net/ethernet/agere/et131x.c
+++ b/drivers/net/ethernet/agere/et131x.c
@@ -1109,7 +1109,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
writel(0, &rxmac->mif_ctrl);
writel(0, &rxmac->space_avail);
- /* Initialize the the mif_ctrl register
+ /* Initialize the mif_ctrl register
* bit 3: Receive code error. One or more nibbles were signaled as
* errors during the reception of the packet. Clear this
* bit in Gigabit, set it in 100Mbit. This was derived
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index 47bfea24b9e1..b93c11cd3b73 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1234,7 +1234,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
* @budget : maximum number of packets that the current CPU can receive from
* all interfaces.
* Description :
- * This function implements the the reception process.
+ * This function implements the reception process.
* Also it runs the TX completion thread
*/
static int xgmac_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 9a18e7930b31..92c4c46d2f0b 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2353,7 +2353,7 @@ static irqreturn_t be_intx(int irq, void *dev)
}
be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- /* Return IRQ_HANDLED only for the the first spurious intr
+ /* Return IRQ_HANDLED only for the first spurious intr
* after a valid intr to stop the kernel from branding
* this irq as a bad one!
*/
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 45c8c864104e..960e5fa4fb7b 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -3986,7 +3986,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
* @hw: Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*/
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 48b74a549155..392eb5748897 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3892,7 +3892,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
* @hw: pointer to the HW structure
*
* ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
- * register, so the the bus width is hard coded.
+ * register, so the bus width is hard coded.
**/
static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
index 14a4ea795c01..dd6254921e20 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
@@ -809,7 +809,7 @@ static s32 fm10k_mbx_read(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
* @hw: pointer to hardware structure
* @mbx: pointer to mailbox
*
- * This function copies the message from the the message array to mbmem
+ * This function copies the message from the message array to mbmem
**/
static void fm10k_mbx_write(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
{
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 051ea94bdcd3..49c5a37e01b2 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2166,7 +2166,7 @@ out:
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index fec5212d4337..f9595241b269 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -229,7 +229,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
struct pci_dev *pdev;
- /* determine whether to use the the parent device
+ /* determine whether to use the parent device
*/
if (ixgbe_pcie_from_parent(&adapter->hw))
pdev = adapter->pdev->bus->parent->self;
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index f5e4b820128b..aad8fdb4dfc6 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2158,7 +2158,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
/*
* In PCI 33 mode, the P_PLL is not used, and therefore,
- * the the P_PLL_LOCK bit in the adapter_status register will
+ * the P_PLL_LOCK bit in the adapter_status register will
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 3b67d60d4378..b8da6e89059a 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -83,7 +83,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* returns: 0 on success, -ETIMEDOUT on a timeout
*
* Writes the value to the requested register by first writing the value
- * into MWD register. The the MCR register is then appropriately setup
+ * into MWD register. The MCR register is then appropriately setup
* to finish the write operation.
*/
static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 5a34e72bab9a..6113a29f01bc 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -250,14 +250,14 @@ struct i2400m_barker_db;
*
* @bus_setup: [optional fill] Function called by the bus-generic code
* [i2400m_setup()] to setup the basic bus-specific communications
- * to the the device needed to load firmware. See LIFE CYCLE above.
+ * to the device needed to load firmware. See LIFE CYCLE above.
*
* NOTE: Doesn't need to upload the firmware, as that is taken
* care of by the bus-generic code.
*
* @bus_release: [optional fill] Function called by the bus-generic
* code [i2400m_release()] to shutdown the basic bus-specific
- * communications to the the device needed to load firmware. See
+ * communications to the device needed to load firmware. See
* LIFE CYCLE above.
*
* This function does not need to reset the device, just tear down
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 0b602951ff6b..4466ee71d1e4 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -693,7 +693,7 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq,
* right spot where to insert the packet; we know the queue is
* not empty, so we are not the first ones; we also know we
* are not going to be the last ones. The list is sorted, so
- * we have to insert before the the first guy with an nsn_itr
+ * we have to insert before the first guy with an nsn_itr
* greater that our nsn. */
skb_queue_walk(&roq->queue, skb_itr) {
roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb;
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index f20886ade1cc..1f7b2b922fae 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -233,7 +233,7 @@
* i2400m_tx_skip_tail() Marks unusable FIFO tail space
* i2400m->bus_tx_kick()
*
- * Now i2400m->bus_tx_kick() is the the bus-specific driver backend
+ * Now i2400m->bus_tx_kick() is the bus-specific driver backend
* implementation; that would do:
*
* i2400m->bus_tx_kick()
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index e1ffdd57a18c..2e3c004641cd 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -77,7 +77,7 @@ struct rx_attention {
* first_msdu is set.
*
* peer_idx_invalid
- * Indicates no matching entries within the the max search
+ * Indicates no matching entries within the max search
* count. Only set when first_msdu is set.
*
* peer_idx_timeout
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index dc6bd8cd9b83..e32154fe1732 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -98,7 +98,7 @@ struct bus_request {
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- * implemented using the asynchronous mode allowing the the bus
+ * implemented using the asynchronous mode allowing the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index eab0ab976af2..9963faaa465f 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1173,7 +1173,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
* Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
+ * response is available in the FIFO
*
* CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index 9a2afa2c690b..5184d6cbcb90 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -638,7 +638,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN,
AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT);
- /* on AR92xx, the highest bit of count will make the the chip send
+ /* on AR92xx, the highest bit of count will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 697c4ae90af0..c8bb48cc410d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1644,7 +1644,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
- /* on AR93xx and newer, count = 0 will make the the chip send
+ /* on AR93xx and newer, count = 0 will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index a1f1127d7808..24cce9db3ce0 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -1609,7 +1609,7 @@ struct wcn36xx_hal_config_bss_params {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -1746,7 +1746,7 @@ struct wcn36xx_hal_config_bss_params_v1 {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -3736,10 +3736,10 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
/* success or failure */
u32 status;
- /* Length of the responce message */
+ /* Length of the response message */
u32 rsp_length;
- /* FIXME: Currently considering the the responce will be less than
+ /* FIXME: Currently considering that the response will be less than
* 100bytes */
u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
} __packed;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 1b474828d5b8..46a0d6575454 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3819,7 +3819,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
}
/*
- * Suspend the the MAC and update the slot timing
+ * Suspend the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index 5bca1f8bfebf..42dda815783f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -191,7 +191,7 @@ enum iwl_tx_flags {
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
+ * @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @key: security key
* @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
@@ -554,7 +554,7 @@ struct iwl_extended_beacon_notif {
/**
* enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
+ * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
index 12283b55ee84..e79ba0a6ad41 100644
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
@@ -67,7 +67,7 @@
#include "fw-api.h"
#include "mvm.h"
-/* Maps the driver specific channel width definition to the the fw values */
+/* Maps the driver specific channel width definition to the fw values */
static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
{
switch (chandef->width) {
@@ -88,7 +88,7 @@ static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
/*
* Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
+ * freq) definitions to the fw values
*/
static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index 2713f7acd35e..53618b0e29c0 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -262,7 +262,7 @@ free_and_exit:
* This function is called when the 'fw_dump' file is opened for
* reading.
* This function dumps firmware memory in different files
- * (ex. DTCM, ITCM, SQRAM etc.) based on the the segments for
+ * (ex. DTCM, ITCM, SQRAM etc.) based on the segments for
* debugging.
*/
static ssize_t
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 8428858204a6..e1f05ad89d9e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -596,7 +596,7 @@ static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
* rsi_sdio_host_intf_read_pkt() - This function reads the packet
from the device.
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
* @length: Length of the data to be read from the device.
*
* Return: 0 on success, -1 on failure.
@@ -627,7 +627,7 @@ int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter,
* rsi_init_sdio_interface() - This function does init specific to SDIO.
*
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
*
* Return: 0 on success, -1 on failure.
*/
diff --git a/drivers/net/wireless/ti/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h
index 2bdec38699f4..bfe998947957 100644
--- a/drivers/net/wireless/ti/wl1251/acx.h
+++ b/drivers/net/wireless/ti/wl1251/acx.h
@@ -1243,7 +1243,7 @@ struct wl1251_acx_arp_filter {
u8 address[16]; /* The IP address used to filter ARP packets.
ARP packets that do not match this address are
dropped. When the IP Version is 4, the last 12
- bytes of the the address are ignored. */
+ bytes of the address are ignored. */
} __attribute__((packed));
struct wl1251_acx_ac_cfg {
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 2305dc0382bc..26a51bdecd44 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1852,7 +1852,7 @@ static void of_alias_add(struct alias_prop *ap, struct device_node *np,
* of_alias_scan - Scan all properties of 'aliases' node
*
* The function scans all the properties of 'aliases' node and populate
- * the the global lookup table with the properties. It returns the
+ * the global lookup table with the properties. It returns the
* number of alias_prop found, or error code in error case.
*
* @dt_alloc: An allocator that provides a virtual address to memory
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index bcb90e4888dd..c1dc11893cea 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -36,7 +36,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#define pr_fmt(fmt) "acpiphp_glue: " fmt
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
index 7dfef3ee5b53..40511e39cea5 100644
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ b/drivers/pcmcia/pxa2xx_hx4700.c
@@ -33,7 +33,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/*
* IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
* The asic3 default IRQ type is level trigger low level detect, exactly
- * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+ * the signal present on GPIOD4_CF_nCD when a CF card is inserted.
* If the IRQ type is not changed, the asic3 interrupt handler will loop
* repeatedly because it is unable to clear the level trigger interrupt.
*/
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index 746db6acf648..ca1f9f5bdd61 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1265,7 +1265,7 @@ static int nmk_gpio_probe(struct platform_device *dev)
platform_set_drvdata(dev, nmk_chip);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 354a81d40925..fcdc83a9ade2 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1627,7 +1627,7 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 62653f50a524..6f0afdff9402 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -302,8 +302,9 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
ret = power_supply_show_property(dev, attr, prop_buf);
if (ret == -ENODEV || ret == -ENODATA) {
- /* When a battery is absent, we expect -ENODEV. Don't abort;
- send the uevent with at least the the PRESENT=0 property */
+ /* When a battery is absent, we expect -ENODEV.
+ * Don't abort; send the uevent with at least
+ * the PRESENT=0 property */
ret = 0;
continue;
}
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index 28871cd7e3b5..f224020e14d8 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -122,7 +122,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
- * configurations, so we use the the first method there, stripping off
+ * configurations, so we use the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index fd22c811cbe1..8a84e2e42ca2 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3454,7 +3454,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 2035b0d64351..e62a7346428a 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1983,7 +1983,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
/*
* Device's PID has changed. We need to cleanup
* and re-login. If there is another device with
- * the the newly discovered pid, send an scn notice
+ * the newly discovered pid, send an scn notice
* so that its new pid can be discovered.
*/
list_for_each(qe, &rport->port->rport_q) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 4a8ac7d8c76b..32ae141449ff 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -510,7 +510,7 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
* @skb: The receive skb
* @netdev: The associated net device
* @ptype: The packet_type structure which was used to register this handler
- * @orig_dev: The original net_device the the skb was received on.
+ * @orig_dev: The original net_device that the skb was received on.
* (in case dev is a bond)
*
* Returns: 0 for success
@@ -2726,7 +2726,7 @@ module_exit(fcoe_exit);
* fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
* @seq: active sequence in the FLOGI or FDISC exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
@@ -2755,7 +2755,7 @@ done:
* fcoe_logo_resp() - FCoE specific LOGO response handler
* @seq: active sequence in the LOGO exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 34a1b1f333b4..65a53a9eb059 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -213,7 +213,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new)
* that doesn't have a priv (fcf was deleted). However,
* libfcoe will always delete FCFs before trying to add
* them. This is ensured because both recv_adv and
- * age_fcfs are protected by the the fcoe_ctlr's mutex.
+ * age_fcfs are protected by the fcoe_ctlr's mutex.
* This means that we should never get a FCF with a
* non-NULL priv pointer.
*/
@@ -694,7 +694,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
*
* The caller must check that the length is a multiple of 4.
* The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
- * The the skb must also be an fc_frame.
+ * The skb must also be an fc_frame.
*
* This is called from the lower-level driver with spinlocks held,
* so we must not take a mutex here.
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 22a9bb1abae1..025ec5c10978 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -244,7 +244,7 @@ enum sci_controller_states {
SCIC_INITIALIZED,
/**
- * This state indicates the the controller is in the process of becoming
+ * This state indicates that the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 47a013fffae7..07af745220eb 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete(
* permitted. This state is entered from the INITIAL state. This state
* is entered from the STOPPING state.
*
- * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * @SCI_DEV_STARTING: This state indicates that the remote device is in
* the process of becoming ready (i.e. starting). In this state no new
* IO operations are permitted. This state is entered from the STOPPED
* state.
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
index c7ee81d01125..f22950b12b8b 100644
--- a/drivers/scsi/isci/remote_node_context.h
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state {
/**
* struct sci_remote_node_context - This structure contains the data
* associated with the remote node context object. The remote node context
- * (RNC) object models the the remote device information necessary to manage
+ * (RNC) object models the remote device information necessary to manage
* the silicon RNC.
*/
struct sci_remote_node_context {
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 5d6fda72d659..ba330e56bfe7 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -67,7 +67,7 @@
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
-* @ihost: host on which the the request was queued
+* @ihost: host on which the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 2f9b96826ac0..8a76261d8915 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1680,7 +1680,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -1713,7 +1713,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -1846,7 +1846,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -1878,7 +1878,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 4c25485aa934..33f0cd6baf2d 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5806,7 +5806,7 @@ reject_out:
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful, the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 5452f1f4220e..69ff3f9fa92b 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2040,7 +2040,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so that the round robin selection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
@@ -5746,7 +5746,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
}
/* This routine decrements the reference count for a ndlp structure. If the
- * count goes to 0, this indicates the the associated nodelist should be
+ * count goes to 0, this indicates that the associated nodelist should be
* freed. Returning 1 indicates the ndlp resource has been released; on the
* other hand, returning 0 indicates the ndlp resource has not been released
* yet.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0b2c53af85c7..015cc6f07dff 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3917,7 +3917,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelevant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 06241f590c1e..f1666cdcb02c 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2265,7 +2265,7 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * that the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 207a43d952fa..94826050e89e 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -16743,7 +16743,7 @@ out:
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 933f21471951..50291d5ec1d9 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3220,7 +3220,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when HBA driver received the identify done event or initiate FIS received
* event(for SATA), it will invoke this function to notify the sas layer that
- * the sas toplogy has formed, please discover the the whole sas domain,
+ * the sas toplogy has formed, please discover the whole sas domain,
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 80b8408ac3e3..4cbdc43d509c 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -354,7 +354,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
{
/*
* On all 4xx PPC's the SPI bus is shared/multiplexed with
- * the 2nd I2C bus. We need to enable the the SPI bus before
+ * the 2nd I2C bus. We need to enable the SPI bus before
* using it.
*/
diff --git a/drivers/staging/android/ion/ion.c b/drivers/staging/android/ion/ion.c
index 56604f41ec48..290d4d22c102 100644
--- a/drivers/staging/android/ion/ion.c
+++ b/drivers/staging/android/ion/ion.c
@@ -902,7 +902,7 @@ void ion_pages_sync_for_device(struct device *dev, struct page *page,
sg_set_page(&sg, page, size, 0);
/*
* This is not correct - sg_dma_address needs a dma_addr_t that is valid
- * for the the targeted device, but this works on the currently targeted
+ * for the targeted device, but this works on the currently targeted
* hardware.
*/
sg_dma_address(&sg) = page_to_phys(page);
diff --git a/drivers/staging/android/uapi/binder.h b/drivers/staging/android/uapi/binder.h
index dba4cef3a8d3..1faba0154a9d 100644
--- a/drivers/staging/android/uapi/binder.h
+++ b/drivers/staging/android/uapi/binder.h
@@ -265,7 +265,7 @@ enum binder_driver_return_protocol {
BR_FAILED_REPLY = _IO('r', 17),
/*
- * The the last transaction (either a bcTRANSACTION or
+ * The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
};
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index 01796cd28e5b..8ed150689f97 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -35,7 +35,7 @@
* automatically.
*
* The PCI230+ and PCI260+ have the same PCI device IDs as the PCI230 and
- * PCI260, but can be distinguished by the the size of the PCI regions. A
+ * PCI260, but can be distinguished by the size of the PCI regions. A
* card will be configured as a "+" model if detected as such.
*
* Subdevices:
diff --git a/drivers/staging/lustre/lustre/llite/file.c b/drivers/staging/lustre/lustre/llite/file.c
index c99b74117152..f1f75c7edee0 100644
--- a/drivers/staging/lustre/lustre/llite/file.c
+++ b/drivers/staging/lustre/lustre/llite/file.c
@@ -368,7 +368,7 @@ int ll_file_release(struct inode *inode, struct file *file)
fd = LUSTRE_FPRIVATE(file);
LASSERT(fd != NULL);
- /* The last ref on @file, maybe not the the owner pid of statahead.
+ /* The last ref on @file, maybe not the owner pid of statahead.
* Different processes can open the same dir, "ll_opendir_key" means:
* it is me that should stop the statahead thread. */
if (S_ISDIR(inode->i_mode) && lli->lli_opendir_key == fd &&
diff --git a/drivers/staging/lustre/lustre/ptlrpc/pinger.c b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
index 20341b27a06a..e8d00408117a 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/pinger.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/pinger.c
@@ -448,7 +448,7 @@ struct timeout_item* ptlrpc_new_timeout(int time, enum timeout_event event,
}
/**
- * Register timeout event on the the pinger thread.
+ * Register timeout event on the pinger thread.
* Note: the timeout list is an sorted list with increased timeout value.
*/
static struct timeout_item*
diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index 9935e66935af..350d2e73b419 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -456,7 +456,7 @@ u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network *pnetwork)
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the connection. */
+ /* If the driver wants to use the bssid to create the connection. */
/* If not, we have to copy the connecting AP's MAC address to it so that */
/* the driver just has the bssid information for PMKIDList searching. */
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 73de9e9669f6..7487b970b670 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -922,7 +922,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
int i;
struct ieee80211_rxb *rxb = NULL;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.c b/drivers/staging/rtl8712/rtl871x_cmd.c
index d9c1561e3272..5aae4cce8477 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -527,7 +527,7 @@ u8 r8712_joinbss_cmd(struct _adapter *padapter, struct wlan_network *pnetwork)
memcpy(&psecuritypriv->authenticator_ie[1],
&psecnetwork->IEs[12], (256-1));
psecnetwork->IELength = 0;
- /* If the the driver wants to use the bssid to create the connection.
+ /* If the driver wants to use the bssid to create the connection.
* If not, we copy the connecting AP's MAC address to it so that
* the driver just has the bssid information for PMKIDList searching.
*/
diff --git a/drivers/staging/rtl8723au/core/rtw_cmd.c b/drivers/staging/rtl8723au/core/rtw_cmd.c
index 4eaa50297b95..ad32384e54ea 100644
--- a/drivers/staging/rtl8723au/core/rtw_cmd.c
+++ b/drivers/staging/rtl8723au/core/rtw_cmd.c
@@ -518,7 +518,7 @@ int rtw_joinbss_cmd23a(struct rtw_adapter *padapter,
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the
+ /* If the driver wants to use the bssid to create the
* connection. If not, we have to copy the connecting AP's
* MAC address to it so that the driver just has the bssid
* information for PMKIDList searching. */
diff --git a/drivers/staging/unisys/common-spar/include/channels/iochannel.h b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
index b1dd73d1f42c..806d5b3bca48 100644
--- a/drivers/staging/unisys/common-spar/include/channels/iochannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
@@ -594,7 +594,7 @@ struct uiscmdrsp_scsitaskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
@@ -641,7 +641,7 @@ struct uiscmdrsp_vdiskmgmt {
* For windows guests, this is a pointer to a location that a waiting
* thread is testing to see if the taskmgmt command has completed.
* When the rsp is received by guest, the thread receiving the
- * response uses this to notify the the thread waiting for taskmgmt
+ * response uses this to notify the thread waiting for taskmgmt
* command completion. Its value is preserved by iopart & returned
* as is in the task mgmt rsp. */
void *notifyresult;
diff --git a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
index 1231c454176f..bc5cd2951a33 100644
--- a/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/vbuschannel.h
@@ -67,11 +67,11 @@ typedef struct _ULTRA_VBUS_HEADERINFO {
u32 devInfoCount; /* num of items in DevInfo member */
/* (this is the allocated size) */
u32 chpInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the ChpInfo struct (below) */
+ /* to the ChpInfo struct (below) */
u32 busInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the BusInfo struct (below) */
+ /* to the BusInfo struct (below) */
u32 devInfoByteOffset; /* byte offset from beginning of this struct */
- /* to the the DevInfo array (below) */
+ /* to the DevInfo array (below) */
u8 reserved[104];
} ULTRA_VBUS_HEADERINFO;
diff --git a/drivers/staging/unisys/virtpci/virtpci.c b/drivers/staging/unisys/virtpci/virtpci.c
index ee9f8260cd15..058ecc2440ea 100644
--- a/drivers/staging/unisys/virtpci/virtpci.c
+++ b/drivers/staging/unisys/virtpci/virtpci.c
@@ -752,7 +752,7 @@ static int virtpci_device_resume(struct device *dev)
/* For a child device just created on a client bus, fill in
* information about the driver that is controlling this device into
- * the the appropriate slot within the vbus channel of the bus
+ * the appropriate slot within the vbus channel of the bus
* instance.
*/
static void fix_vbus_devInfo(struct device *dev, int devNo, int devType,
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index fbc5ebb5f761..c0664ec01fc2 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -411,7 +411,7 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
} else {
/*
* Extract the RELATIVE TARGET PORT IDENTIFIER to identify
- * the Target Port in question for the the incoming
+ * the Target Port in question for the incoming
* SET_TARGET_PORT_GROUPS op.
*/
rtpi = get_unaligned_be16(ptr + 2);
diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h
index ba87d6e731dd..1a4ba247f160 100644
--- a/drivers/thunderbolt/ctl.h
+++ b/drivers/thunderbolt/ctl.h
@@ -44,7 +44,7 @@ struct tb_cfg_result {
* If err = 1 then this is the port that send the
* error.
* If err = 0 and if this was a cfg_read/write then
- * this is the the upstream port of the responding
+ * this is the upstream port of the responding
* switch.
* Otherwise the field is set to zero.
*/
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 6234c75da33f..50294f31f227 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -313,8 +313,7 @@ static const int hrsl_to_error[] = {
/*
* See http://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a
- * reasonable overview of how control transfers use the the IN/OUT
- * tokens.
+ * reasonable overview of how control transfers use the IN/OUT tokens.
*/
#define MAX3421_HXFR_BULK_IN(ep) (0x00 | (ep)) /* bulk or interrupt */
#define MAX3421_HXFR_SETUP 0x10
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index bc6fcbc16f61..3671975e3272 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1613,7 +1613,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
- * RExit to a disconnect state). If so, let the the driver know it's
+ * RExit to a disconnect state). If so, let the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED(temp) &&
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 01bf53392819..1b99a08ca2de 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -261,7 +261,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
* Cypress app note that describes this mechanism
- * states the the low-speed part can't handle more
+ * states that the low-speed part can't handle more
* than 800 bytes/sec, in which case 4800 baud is the
* safest speed for a part like that.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index dfd728a263d2..71636a617d89 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -429,7 +429,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
}
/*
- * This is the the common top part of all parallel port callback operations that
+ * This is the common top part of all parallel port callback operations that
* send synchronous messages to the device. This implements convoluted locking
* that avoids two scenarios: (1) a port operation is called after usbserial
* has called our release function, at which point struct mos7715_parport has
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 3f4f5fbded55..fe4447f3f2ea 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -46,7 +46,7 @@
*
* ASSUMPTIONS:
*
- * - We use the the as device address the port number where it is
+ * - We use as device address the port number where it is
* connected (port 0 doesn't exist). For unauth, it is 128 + that.
*
* ROADMAP:
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
index b7d4f6b75eef..caa4cb40334d 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/uwb/drp-ie.c
@@ -262,7 +262,7 @@ int uwb_drp_ie_update(struct uwb_rsv *rsv)
* We are given a zone id and the MAS bitmap of bits that need to be set in
* this zone. Note that this zone may already have bits set and this only
* adds settings - we cannot simply assign the MAS bitmap contents to the
- * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * zone contents. We iterate over the bits (MAS) in the zone and set the
* bits that are set in the given MAS bitmap.
*/
static
diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
index d4e7684e7045..501bc08dc125 100644
--- a/drivers/video/fbdev/omap/sossi.c
+++ b/drivers/video/fbdev/omap/sossi.c
@@ -370,7 +370,7 @@ static void sossi_set_bits_per_cycle(int bpc)
int bus_pick_count, bus_pick_width;
/*
- * We set explicitly the the bus_pick_count as well, although
+ * We set explicitly the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
diff --git a/drivers/video/fbdev/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c
index ceb434c95c0d..9177b8056356 100644
--- a/drivers/video/fbdev/sis/sis_accel.c
+++ b/drivers/video/fbdev/sis/sis_accel.c
@@ -215,7 +215,7 @@ SiS310SubsequentScreenToScreenCopy(struct sis_video_info *ivideo, int src_x, int
* and destination blitting areas overlap and
* adapt the bitmap addresses synchronously
* if the coordinates exceed the valid range.
- * The the areas do not overlap, we do our
+ * If the areas do not overlap, we do our
* normal check.
*/
if((mymax - mymin) < height) {
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index aaf96cb25452..52c38b9025c1 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -507,7 +507,7 @@ static int autofs_dev_ioctl_askumount(struct file *fp,
* located path is the root of a mount we return 1 along with
* the super magic of the mount or 0 otherwise.
*
- * In both cases the the device number (as returned by
+ * In both cases the device number (as returned by
* new_encode_dev()) is also returned.
*/
static int autofs_dev_ioctl_ismountpoint(struct file *fp,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index 6f662b34ba0e..bb6a3057a592 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -861,7 +861,7 @@ int btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace)
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
- * not called and the the filesystem is remounted
+ * not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancelation is wanted.
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index 874828dd0a86..ae4a297a513b 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -3427,7 +3427,7 @@ verbose_printk("btrfs: process_recorded_refs %llu\n", sctx->cur_ino);
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
- * the the current inum. To handle this case, we create the
+ * than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 1475979e5718..813e83e6c3f1 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2656,7 +2656,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
mutex_unlock(&log_root_tree->log_mutex);
/*
- * nobody else is going to jump in and write the the ctree
+ * nobody else is going to jump in and write the ctree
* super here because the log_commit atomic below is protecting
* us. We must be called with a transaction handle pinning
* the running transaction open, so a full commit can't hop
diff --git a/fs/dcache.c b/fs/dcache.c
index d5a23fd0da90..a16894acdb11 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1871,8 +1871,8 @@ EXPORT_SYMBOL(d_obtain_root);
* same inode, only the actual correct case is stored in the dcache for
* case-insensitive filesystems.
*
- * For a case-insensitive lookup match and if the the case-exact dentry
- * already exists in in the dcache, use it and return it.
+ * For a case-insensitive lookup match and if the case-exact dentry
+ * already exists in the dcache, use it and return it.
*
* If no entry exists with the exact case name, allocate new dentry with
* the exact case, and return the spliced entry.
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 635e8e16a5b7..baa529767d71 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -899,7 +899,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack {
* @filename: This function kmalloc's the memory for the filename
* @filename_size: This function sets this to the amount of memory
* kmalloc'd for the filename
- * @packet_size: This function sets this to the the number of octets
+ * @packet_size: This function sets this to the number of octets
* in the packet parsed
* @mount_crypt_stat: The mount-wide cryptographic context
* @data: The memory location containing the start of the tag 70
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index d9a17d0b124d..c9c6f2e5a0a0 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -51,7 +51,7 @@ struct ext2_block_alloc_info {
/*
* Was i_next_alloc_goal in ext2_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it is the physical block number of the block which was most-recently
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index bea662bd0ca6..3b94971b7b9b 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -271,7 +271,7 @@ static int ext4_create_inline_data(handle_t *handle,
len = 0;
}
- /* Insert the the xttr entry. */
+ /* Insert the xttr entry. */
i.value = value;
i.value_len = len;
@@ -829,7 +829,7 @@ out:
/*
* Prepare the write for the inline data.
- * If the the data can be written into the inode, we just read
+ * If the data can be written into the inode, we just read
* the page and make it uptodate, and start the journal.
* Otherwise read the page, makes it dirty so that it can be
* handle in writepages(the i_disksize update is left to the
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index 2495bec1c621..dcb02afd6203 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -158,7 +158,7 @@ struct seg_entry {
unsigned short valid_blocks; /* # of valid blocks */
unsigned char *cur_valid_map; /* validity bitmap of blocks */
/*
- * # of valid blocks and the validity bitmap stored in the the last
+ * # of valid blocks and the validity bitmap stored in the last
* checkpoint pack. This information is used by the SSR mode.
*/
unsigned short ckpt_valid_blocks;
diff --git a/fs/kernfs/file.c b/fs/kernfs/file.c
index 4429d6d9217f..2d4e4ef09b73 100644
--- a/fs/kernfs/file.c
+++ b/fs/kernfs/file.c
@@ -259,7 +259,7 @@ static ssize_t kernfs_fop_read(struct file *file, char __user *user_buf,
* There is no easy way for us to know if userspace is only doing a partial
* write, so we don't support them. We expect the entire buffer to come on
* the first write. Hint: if you're writing a value, first read the file,
- * modify only the the value you're changing, then write entire buffer
+ * modify only the value you're changing, then write entire buffer
* back.
*/
static ssize_t kernfs_fop_write(struct file *file, const char __user *user_buf,
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 044013455621..c0aa12bdb106 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -690,7 +690,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb,
/*
* Under certain conditions, the window slide code
* might have reduced the number of bits available or
- * disabled the the local alloc entirely. Re-check
+ * disabled the local alloc entirely. Re-check
* here and return -ENOSPC if necessary.
*/
status = -ENOSPC;
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index 5a6bd5d8779a..85438d16e633 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -71,7 +71,7 @@ xfs_fs_encode_fh(
fileid_type = FILEID_INO32_GEN_PARENT;
/*
- * If the the filesystem may contain 64bit inode numbers, we need
+ * If the filesystem may contain 64bit inode numbers, we need
* to use larger file handles that can represent them.
*
* While we only allocate inodes that do not fit into 32 bits any
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index 26bb55e9e8b6..37cdb83e1e24 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -120,7 +120,7 @@ static inline int drm_rect_height(const struct drm_rect *r)
}
/**
- * drm_rect_visible - determine if the the rectangle is visible
+ * drm_rect_visible - determine if the rectangle is visible
* @r: rectangle whose visibility is returned
*
* RETURNS:
diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h
index d5b5f76d57ef..91c32b80c6d1 100644
--- a/include/linux/mic_bus.h
+++ b/include/linux/mic_bus.h
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ include/linux/virtio.h.
*/
#ifndef _MIC_BUS_H_
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 02d11ee7f19d..8230369b0cca 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -197,7 +197,7 @@ extern pgprot_t protection_map[16];
#define FAULT_FLAG_USER 0x80 /* The fault originated in userspace */
/*
- * vm_fault is filled by the the pagefault handler and passed to the vma's
+ * vm_fault is filled by the pagefault handler and passed to the vma's
* ->fault function. The vma's ->fault is responsible for returning a bitmask
* of VM_FAULT_xxx flags that give details about how the fault was handled.
*
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 1c9effa25e26..85a8edc122bf 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -106,7 +106,7 @@ struct kparam_array
* ".") the kernel commandline parameter. Note that - is changed to _, so
* the user can use "foo-bar=1" even for variable "foo_bar".
*
- * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * @perm is 0 if the variable is not to appear in sysfs, or 0444
* for world-readable, 0644 for root-writable, etc. Note that if it
* is writable, you may need to use kparam_block_sysfs_write() around
* accesses (esp. charp, which can be kfreed when it changes).
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 3ab0749d6875..f2fc82c14c97 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2797,7 +2797,7 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
* must call this function to return the skb back to the stack, with
* or without a timestamp.
*
- * @skb: clone of the the original outgoing packet
+ * @skb: clone of the original outgoing packet
* @hwtstamps: hardware time stamps, may be NULL if not available
*
*/
diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h
index 94e5ed64dc6d..e9a8d524ab06 100644
--- a/include/net/caif/caif_layer.h
+++ b/include/net/caif/caif_layer.h
@@ -184,7 +184,7 @@ struct cflayer {
* CAIF packet downwards in the stack.
* Packet handling rules:
* - The CAIF packet (cfpkt) ownership is passed to the
- * transmit function. This means that the the packet
+ * transmit function. This means that the packet
* cannot be accessed after passing it to the below
* layer using dn->transmit().
*
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 8eea35d32a75..951d1c2fe664 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -100,7 +100,7 @@ struct rt6_info {
struct in6_addr rt6i_gateway;
/* Multipath routes:
- * siblings is a list of rt6_info that have the the same metric/weight,
+ * siblings is a list of rt6_info that have the same metric/weight,
* destination, but not the same gateway. nsiblings is just a cache
* to speed up lookup.
*/
diff --git a/include/net/wimax.h b/include/net/wimax.h
index c52b68577cb0..c9705a3eb3b7 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -43,7 +43,7 @@
*
* USAGE
*
- * Embed a `struct wimax_dev` at the beginning of the the device's
+ * Embed a `struct wimax_dev` at the beginning of the device's
* private structure, initialize and register it. For details, see
* `struct wimax_dev`s documentation.
*
diff --git a/include/uapi/asm-generic/fcntl.h b/include/uapi/asm-generic/fcntl.h
index 7543b3e51331..3c8f396825b8 100644
--- a/include/uapi/asm-generic/fcntl.h
+++ b/include/uapi/asm-generic/fcntl.h
@@ -142,7 +142,7 @@
* record locks, but are "owned" by the open file description, not the
* process. This means that they are inherited across fork() like BSD (flock)
* locks, and they are only released automatically when the last reference to
- * the the open file against which they were acquired is put.
+ * the open file against which they were acquired is put.
*/
#define F_OFD_GETLK 36
#define F_OFD_SETLK 37
diff --git a/init/Kconfig b/init/Kconfig
index 3ee28ae02cc8..59255136af34 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -861,8 +861,8 @@ config LOG_CPU_MAX_BUF_SHIFT
used as it forces an exact (power of two) size of the ring buffer.
The number of possible CPUs is used for this computation ignoring
- hotplugging making the compuation optimal for the the worst case
- scenerio while allowing a simple algorithm to be used from bootup.
+ hotplugging making the computation optimal for the worst case
+ scenario while allowing a simple algorithm to be used from bootup.
Examples shift values and their meaning:
17 => 128 KB for each CPU
diff --git a/init/main.c b/init/main.c
index 800a0daede7e..ba9cbd64b716 100644
--- a/init/main.c
+++ b/init/main.c
@@ -512,7 +512,7 @@ asmlinkage __visible void __init start_kernel(void)
debug_objects_early_init();
/*
- * Set up the the initial canary ASAP:
+ * Set up the initial canary ASAP:
*/
boot_init_stack_canary();
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 9019f15deab2..6e82ca9e2735 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -17,7 +17,7 @@
#ifdef HAVE_JUMP_LABEL
-/* mutex to protect coming/going of the the jump_label table */
+/* mutex to protect coming/going of the jump_label table */
static DEFINE_MUTEX(jump_label_mutex);
void jump_label_lock(void)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index ced2b84b1cb7..060342f1e729 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2872,7 +2872,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
- * with as many of the the *youngest* kmsg records that fit into it.
+ * with as many of the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
diff --git a/kernel/smp.c b/kernel/smp.c
index f38a1e692259..2a2865ab3ec6 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -623,7 +623,7 @@ EXPORT_SYMBOL(on_each_cpu_mask);
* for all the required CPUs to finish. This may include the local
* processor.
* @cond_func: A callback function that is passed a cpu id and
- * the the info parameter. The function is called
+ * the info parameter. The function is called
* with preemption disabled. The function should
* return a blooean value indicating whether to IPI
* the specified CPU.
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 2d75c94ae87d..f3b69288737f 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2881,7 +2881,7 @@ rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
* This function lets the user discard an event in the ring buffer
* and then that event will not be read later.
*
- * This function only works if it is called before the the item has been
+ * This function only works if it is called before the item has been
* committed. It will try to free the event from the ring buffer
* if another event has not been added behind it.
*
diff --git a/lib/dynamic_queue_limits.c b/lib/dynamic_queue_limits.c
index 0777c5a45fa0..2ad6fc394f07 100644
--- a/lib/dynamic_queue_limits.c
+++ b/lib/dynamic_queue_limits.c
@@ -60,7 +60,7 @@ void dql_completed(struct dql *dql, unsigned int count)
* the whole interval (the check above).
*
* If there is slack, the amount of execess data queued above
- * the the amount needed to prevent starvation, the queue limit
+ * the amount needed to prevent starvation, the queue limit
* can be decreased. To avoid hysteresis we consider the
* minimum amount of slack found over several iterations of the
* completion routine.
diff --git a/lib/earlycpio.c b/lib/earlycpio.c
index 3eb3e4722b8e..9d4da0a6a6ed 100644
--- a/lib/earlycpio.c
+++ b/lib/earlycpio.c
@@ -50,7 +50,7 @@ enum cpio_fields {
/**
* cpio_data find_cpio_data - Search for files in an uncompressed cpio
* @path: The directory to search for, including a slash at the end
- * @data: Pointer to the the cpio archive or a header inside
+ * @data: Pointer to the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @nextoff: When a matching file is found, this is the offset from the
* beginning of the cpio to the beginning of the next file, not the
diff --git a/lib/syscall.c b/lib/syscall.c
index e30e03932480..624d80430969 100644
--- a/lib/syscall.c
+++ b/lib/syscall.c
@@ -31,7 +31,7 @@ static int collect_syscall(struct task_struct *target, long *callno,
* @pc: filled with user PC
*
* If @target is blocked in a system call, returns zero with *@callno
- * set to the the call's number and @args filled in with its arguments.
+ * set to the call's number and @args filled in with its arguments.
* Registers not used for system call arguments may not be available and
* it is not kosher to use &struct user_regset calls while the system
* call is still in progress. Note we may get this result if @target
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 9fd722769927..37a949b7466f 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1308,7 +1308,7 @@ static void return_unused_surplus_pages(struct hstate *h,
* evenly across all nodes with memory. Iterate across these nodes
* until we can no longer free unreserved surplus pages. This occurs
* when the nodes with surplus pages have no free pages.
- * free_pool_huge_page() will balance the the freed pages across the
+ * free_pool_huge_page() will balance the freed pages across the
* on-line nodes with memory and will handle the hstate accounting.
*/
while (nr_pages--) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 736d8e1b6381..b8e09f18934f 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4217,7 +4217,7 @@ static int zone_batchsize(struct zone *zone)
* locking.
*
* Any new users of pcp->batch and pcp->high should ensure they can cope with
- * those fields changing asynchronously (acording the the above rule).
+ * those fields changing asynchronously (according to the above rule).
*
* mutex_is_locked(&pcp_batch_high_lock) required when calling this function
* outside of boot time (or some other assurance that no concurrent updaters
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index b9517bd17190..dcd81626850c 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -972,7 +972,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
return 0;
}
-/* Encrypt the the link */
+/* Encrypt the link */
static void hci_conn_encrypt(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index cb05d7f16a34..c3677d01e751 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1674,7 +1674,7 @@ static void hci_init3_req(struct hci_request *req, unsigned long opt)
* Delete Stored Link Key command. They are clearly indicating its
* absence in the bit mask of supported commands.
*
- * Check the supported commands and only if the the command is marked
+ * Check the supported commands and only if the command is marked
* as supported send it. If not supported assume that the controller
* does not have actual support for stored link keys which makes this
* command redundant anyway.
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 33a140e15834..c964855b0248 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -146,7 +146,7 @@ int eth_rebuild_header(struct sk_buff *skb)
EXPORT_SYMBOL(eth_rebuild_header);
/**
- * eth_get_headlen - determine the the length of header for an ethernet frame
+ * eth_get_headlen - determine the length of header for an ethernet frame
* @data: pointer to start of frame
* @len: total length of frame
*
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index a88b8524846e..9d83a2e05baf 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1349,7 +1349,7 @@ static void sctp_select_active_and_retran_path(struct sctp_association *asoc)
}
/* We did not find anything useful for a possible retransmission
- * path; either primary path that we found is the the same as
+ * path; either primary path that we found is the same as
* the current one, or we didn't generally find an active one.
*/
if (trans_sec == NULL)
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index 158701da2d31..f0424e16beb7 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -199,7 +199,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3;
max = asoc->frag_point;
- /* If the the peer requested that we authenticate DATA chunks
+ /* If the peer requested that we authenticate DATA chunks
* we need to account for bundling of the AUTH chunks along with
* DATA.
*/
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 6f6b829c9e8e..1ef370a9f675 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -190,7 +190,7 @@ void rpc_destroy_generic_auth(void)
}
/*
- * Test the the current time (now) against the underlying credential key expiry
+ * Test the current time (now) against the underlying credential key expiry
* minus a timeout and setup notification.
*
* The normal case:
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 7d730543f243..53d5e7a8753b 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
* @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
* %WIMAX_RF_OFF radio off.
*
- * Reports changes in the software RF switch state to the the WiMAX
+ * Reports changes in the software RF switch state to the WiMAX
* stack.
*
* The main use is during initialization, so the driver can query the
diff --git a/scripts/coccinelle/misc/badty.cocci b/scripts/coccinelle/misc/badty.cocci
index 2fc06fc71927..7bde383f577b 100644
--- a/scripts/coccinelle/misc/badty.cocci
+++ b/scripts/coccinelle/misc/badty.cocci
@@ -3,7 +3,7 @@
//# This makes an effort to find cases where the argument to sizeof is wrong
//# in memory allocation functions by checking the type of the allocated memory
//# when it is a double pointer and ensuring the sizeof argument takes a pointer
-//# to the the memory being allocated. There are false positives in cases the
+//# to the memory being allocated. There are false positives in cases the
//# sizeof argument is not used in constructing the return value. The result
//# may need some reformatting.
//
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index db40fa04cd51..9eb8c74b69a1 100755
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in
kernel/trace/trace_functions.c
The resulted trace is processed into a tree to produce a more human
view of the call stack by drawing textual but hierarchical tree of
-calls. Only the functions's names and the the call time are provided.
+calls. Only the functions's names and the call time are provided.
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
index 3064c6ced87c..7b9769e7985a 100644
--- a/security/apparmor/context.c
+++ b/security/apparmor/context.c
@@ -13,7 +13,7 @@
* License.
*
*
- * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * AppArmor sets confinement on every task, via the aa_task_cxt and
* the aa_task_cxt.profile, both of which are required and are not allowed
* to be NULL. The aa_task_cxt is not reference counted and is unique
* to each cred (which is reference count). The profile pointed to by
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index eff88a5f5d40..50b40f78fc0f 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -476,7 +476,7 @@ error:
* keyring, otherwise replace the link to the matching key with a link to the
* new key.
*
- * The key must grant the caller Link permission and the the keyring must grant
+ * The key must grant the caller Link permission and the keyring must grant
* the caller Write permission. Furthermore, if an additional link is created,
* the keyring's quota will be extended.
*
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 15e0089492f7..e0e4118e0d23 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -5015,7 +5015,7 @@ EXPORT_SYMBOL_GPL(snd_hda_power_save);
* @nid: NID to check / update
*
* Check whether the given NID is in the amp list. If it's in the list,
- * check the current AMP status, and update the the power-status according
+ * check the current AMP status, and update the power-status according
* to the mute status.
*
* This function is supposed to be set or called from the check_power_status
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 4f6413e01c13..a4b23c4105f8 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -855,7 +855,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec,
static struct snd_kcontrol_new beep_vol_ctl =
HDA_CODEC_VOLUME(NULL, 0, 0, 0);
- /* check for mute support for the the amp */
+ /* check for mute support for the amp */
if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
const struct snd_kcontrol_new *temp;
if (spec->anabeep_nid == nid)
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index f3b491aa3e22..df5cb3b4b6e2 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -31,7 +31,7 @@
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
- * sampling rate. That means the the FPGA doubles the
+ * sampling rate. That means that the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index bddee30a4bc7..eaac777ee91d 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -694,7 +694,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int source)
u64 Kpart;
unsigned int K, Ndiv, Nmod, target;
- /* The the PLL output is always 98.304MHz. */
+ /* The PLL output is always 98.304MHz. */
target = 98304000;
/* If the input frequency is over 14.4MHz then scale it down. */
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index a609aafc994d..3c1c7b71e69b 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -164,7 +164,7 @@ static void fsl_dma_abort_stream(struct snd_pcm_substream *substream)
/**
* fsl_dma_update_pointers - update LD pointers to point to the next period
*
- * As each period is completed, this function changes the the link
+ * As each period is completed, this function changes the link
* descriptor pointers for that period to point to the next period.
*/
static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private)
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index b2c3d0d5dca3..8dc8cc9b8348 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -615,7 +615,7 @@ A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. The DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index b3b8abae62b8..6ba27f21847c 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -196,7 +196,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
- period being the hist entry period value
- - WEIGHT-A/WEIGHT-B being user suplied weights in the the '-c' option
+ - WEIGHT-A/WEIGHT-B being user supplied weights in the '-c' option
behind ':' separator like '-c wdiff:1,2'.
- WIEGHT-A being the weight of the data file
- WIEGHT-B being the weight of the baseline data file
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index 56bfb523c5bb..6940d8849434 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -35,9 +35,9 @@ The \fB-c MSR#\fP option includes the delta of the specified 32-bit MSR counter.
.PP
The \fB-C MSR#\fP option includes the delta of the specified 64-bit MSR counter.
.PP
-The \fB-m MSR#\fP option includes the the specified 32-bit MSR value.
+The \fB-m MSR#\fP option includes the specified 32-bit MSR value.
.PP
-The \fB-M MSR#\fP option includes the the specified 64-bit MSR value.
+The \fB-M MSR#\fP option includes the specified 64-bit MSR value.
.PP
The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
The default is 5 seconds.
diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
index fd7e9e9d6f4a..1aa7faa0e0e0 100644
--- a/tools/thermal/tmon/pid.c
+++ b/tools/thermal/tmon/pid.c
@@ -38,7 +38,7 @@
/**************************************************************************
* PID (Proportional-Integral-Derivative) controller is commonly used in
- * linear control system, consider the the process.
+ * linear control system, consider the process.
* G(s) = U(s)/E(s)
* kp = proportional gain
* ki = integral gain
--
1.9.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2014-10-16 19:42 ` Michael Opdenacker
@ 2015-03-27 1:55 ` Michael Opdenacker
2015-03-27 2:16 ` Michael Opdenacker
2015-03-27 2:23 ` Joe Perches
0 siblings, 2 replies; 35+ messages in thread
From: Michael Opdenacker @ 2015-03-27 1:55 UTC (permalink / raw)
To: edubezval, rdunlap, joe, akpm, arend, gregkh, torvalds
Cc: linux-kernel, Michael Opdenacker
Fix all occurrences of "the the ", and occasionally "in in ",
in the source code, comments and documentation.
The replacement couldn't be automated because sometimes
the first "the" was meant to be another word.
Example: "according the the"
meaning: "according to the"
Note that I sometimes took the opportunity to fix
other spelling issues or typos in the same sentences,
and to reformat some comments impacted by the changes.
I also fixed a few checkpatch errors in the same
lines, but not all of them (should be addressed by
separate patches).
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Reviewed-by: rdunlap@infradead.org
Acked-by: Eduardo Valentin <edubezval@gmail.com>
---
Documentation/ABI/testing/sysfs-class-cxl | 4 +-
Documentation/ABI/testing/sysfs-devices-memory | 2 +-
Documentation/DocBook/crypto-API.tmpl | 2 +-
Documentation/DocBook/media/v4l/controls.xml | 2 +-
Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
Documentation/devicetree/bindings/arm/arm-boards | 2 +-
.../bindings/power/rockchip-io-domain.txt | 2 +-
.../filesystems/autofs4-mount-control.txt | 4 +-
Documentation/filesystems/overlayfs.txt | 2 +-
Documentation/phy.txt | 2 +-
Documentation/vm/unevictable-lru.txt | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/unwind.h | 2 +-
arch/arm/mach-omap2/omap_hwmod.c | 6 +-
arch/arm/mach-pxa/stargate2.c | 2 +-
arch/arm64/crypto/aes-neon.S | 2 +-
arch/blackfin/mach-common/entry.S | 2 +-
arch/c6x/platforms/cache.c | 2 +-
arch/ia64/include/asm/spinlock.h | 2 +-
arch/ia64/include/asm/uv/uv_hub.h | 2 +-
arch/m68k/coldfire/intc-2.c | 2 +-
arch/metag/kernel/process.c | 2 +-
arch/microblaze/kernel/entry.S | 2 +-
arch/mips/alchemy/devboards/pm.c | 2 +-
arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
arch/mips/include/asm/spinlock.h | 2 +-
arch/mips/kvm/mips.c | 2 +-
arch/mips/mm/c-octeon.c | 4 +-
arch/mips/netlogic/xlr/fmn.c | 2 +-
arch/powerpc/include/asm/cache.h | 2 +-
arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
arch/powerpc/kernel/head_64.S | 2 +-
arch/powerpc/mm/gup.c | 235 +++++++++++++++++++++
arch/powerpc/mm/hugetlbpage.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/platforms/chrp/setup.c | 2 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
arch/powerpc/xmon/xmon.c | 2 +-
arch/s390/kernel/perf_cpum_sf.c | 2 +-
arch/s390/mm/gup.c | 2 +-
arch/sparc/kernel/pci.c | 2 +-
arch/sparc/mm/gup.c | 2 +-
arch/tile/include/asm/irqflags.h | 2 +-
arch/tile/include/gxio/trio.h | 2 +-
arch/tile/kernel/single_step.c | 2 +-
arch/x86/include/asm/spinlock.h | 2 +-
arch/x86/include/asm/uv/uv_hub.h | 2 +-
arch/x86/kernel/entry_64.S | 2 +-
arch/x86/kvm/x86.c | 2 +-
arch/x86/mm/gup.c | 4 +-
arch/x86/platform/efi/efi_thunk_64.S | 2 +-
arch/x86/xen/setup.c | 2 +-
arch/xtensa/include/asm/initialize_mmu.h | 2 +-
arch/xtensa/kernel/entry.S | 12 +-
crypto/asymmetric_keys/pkcs7_parser.h | 2 +-
drivers/acpi/acpica/accommon.h | 2 +-
drivers/acpi/acpica/tbfadt.c | 2 +-
drivers/char/apm-emulation.c | 2 +-
drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
drivers/cpuidle/driver.c | 2 +-
drivers/crypto/picoxcell_crypto.c | 2 +-
drivers/crypto/ux500/hash/hash_core.c | 2 +-
drivers/firmware/efi/runtime-wrappers.c | 2 +-
drivers/gpio/gpio-ich.c | 2 +-
drivers/gpio/gpio-sch.c | 2 +-
.../gpu/drm/amd/amdkfd/kfd_device_queue_manager.h | 2 +-
drivers/gpu/drm/drm_crtc.c | 2 +-
drivers/gpu/drm/drm_mm.c | 4 +-
drivers/gpu/drm/i915/i915_gem.c | 2 +-
drivers/gpu/drm/i915/i915_gem_userptr.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 4 +-
drivers/gpu/drm/radeon/atombios.h | 4 +-
drivers/gpu/drm/radeon/r300_reg.h | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 2 +-
drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
drivers/gpu/drm/radeon/radeon_vm.c | 4 +-
drivers/hv/channel.c | 4 +-
drivers/hv/vmbus_drv.c | 4 +-
drivers/hwmon/pmbus/ucd9200.c | 2 +-
drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
drivers/infiniband/hw/qib/qib.h | 2 +-
drivers/input/mouse/gpio_mouse.c | 2 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
drivers/lguest/core.c | 2 +-
drivers/media/dvb-frontends/tda1002x.h | 2 +-
drivers/media/dvb-frontends/tda10048.c | 2 +-
drivers/media/pci/cx88/cx88-dsp.c | 2 +-
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/saa7164/saa7164-core.c | 2 +-
drivers/media/platform/davinci/vpbe.c | 2 +-
drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
drivers/media/usb/dvb-usb/friio.c | 2 +-
drivers/media/usb/dvb-usb/friio.h | 2 +-
drivers/media/usb/gspca/finepix.c | 2 +-
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 2 +-
drivers/memory/emif.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/mfd/db8500-prcmu.c | 2 +-
drivers/misc/mic/bus/mic_bus.c | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/ubi/ubi.h | 4 +-
drivers/mtd/ubi/wl.c | 2 +-
drivers/net/can/xilinx_can.c | 2 +-
drivers/net/ethernet/agere/et131x.c | 2 +-
drivers/net/ethernet/calxeda/xgmac.c | 2 +-
drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
drivers/net/ethernet/intel/fm10k/fm10k_mbx.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
drivers/net/wimax/i2400m/i2400m.h | 4 +-
drivers/net/wimax/i2400m/rx.c | 2 +-
drivers/net/wimax/i2400m/tx.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/wcn36xx/hal.h | 8 +-
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 +-
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 +-
drivers/net/wireless/mwifiex/debugfs.c | 2 +-
drivers/net/wireless/rsi/rsi_91x_sdio.c | 4 +-
drivers/net/wireless/ti/wl1251/acx.h | 2 +-
drivers/pci/hotplug/acpiphp_glue.c | 2 +-
drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 2 +-
drivers/pinctrl/pinctrl-at91.c | 2 +-
drivers/power/power_supply_sysfs.c | 5 +-
drivers/rtc/rtc-rs5c372.c | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 6 +-
drivers/scsi/fcoe/fcoe_ctlr.c | 4 +-
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/remote_device.h | 2 +-
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 8 +-
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 4 +-
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/spi/spi-ppc4xx.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/rtl8723au/core/rtw_cmd.c | 2 +-
drivers/target/target_core_alua.c | 2 +-
drivers/thunderbolt/ctl.h | 2 +-
drivers/usb/host/max3421-hcd.c | 3 +-
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/mos7720.c | 2 +-
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/uwb/drp-ie.c | 2 +-
drivers/video/fbdev/omap/sossi.c | 2 +-
drivers/video/fbdev/sis/sis_accel.c | 2 +-
fs/autofs4/dev-ioctl.c | 2 +-
fs/btrfs/dev-replace.c | 2 +-
fs/btrfs/send.c | 2 +-
fs/btrfs/tree-log.c | 2 +-
fs/dcache.c | 4 +-
fs/ecryptfs/keystore.c | 2 +-
fs/ext2/ext2.h | 2 +-
fs/ext4/inline.c | 4 +-
fs/f2fs/segment.h | 2 +-
fs/kernfs/file.c | 2 +-
fs/ocfs2/localalloc.c | 2 +-
fs/xfs/xfs_export.c | 2 +-
include/drm/drm_rect.h | 2 +-
include/linux/ieee80211.h | 2 +-
include/linux/mic_bus.h | 2 +-
include/linux/mm.h | 2 +-
include/linux/moduleparam.h | 2 +-
include/linux/skbuff.h | 2 +-
include/net/caif/caif_layer.h | 2 +-
include/net/ip6_fib.h | 2 +-
include/net/wimax.h | 2 +-
include/uapi/asm-generic/fcntl.h | 2 +-
include/uapi/linux/android/binder.h | 2 +-
init/Kconfig | 4 +-
init/main.c | 2 +-
kernel/jump_label.c | 2 +-
kernel/printk/printk.c | 2 +-
kernel/smp.c | 2 +-
kernel/trace/ring_buffer.c | 2 +-
lib/dynamic_queue_limits.c | 2 +-
lib/earlycpio.c | 2 +-
lib/syscall.c | 2 +-
mm/hugetlb.c | 2 +-
mm/page_alloc.c | 2 +-
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/hci_core.c | 2 +-
net/ethernet/eth.c | 2 +-
net/sctp/associola.c | 2 +-
net/sctp/chunk.c | 2 +-
net/sunrpc/auth_generic.c | 2 +-
net/wimax/op-rfkill.c | 2 +-
scripts/coccinelle/misc/badty.cocci | 2 +-
scripts/tracing/draw_functrace.py | 2 +-
security/apparmor/context.c | 2 +-
security/keys/keyctl.c | 2 +-
sound/pci/hda/hda_codec.c | 2 +-
sound/pci/hda/patch_sigmatel.c | 2 +-
sound/pci/ice1712/prodigy192.c | 2 +-
sound/soc/codecs/wm9713.c | 2 +-
sound/soc/fsl/fsl_dma.c | 2 +-
sound/sparc/dbri.c | 2 +-
tools/perf/Documentation/perf-diff.txt | 2 +-
tools/thermal/tmon/pid.c | 2 +-
222 files changed, 493 insertions(+), 258 deletions(-)
create mode 100644 arch/powerpc/mm/gup.c
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index 3680364b4048..4838a5751eeb 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -77,8 +77,8 @@ What: /sys/class/cxl/<afu>/api_version_compatible
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
- Decimal value of the the lowest version of the userspace API
- this this kernel supports.
+ Decimal value of the lowest version of the userspace API
+ this kernel supports.
AFU configuration records (eg. /sys/class/cxl/afu0.0/cr0):
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index deef3b5723cf..9767745b99bd 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -45,7 +45,7 @@ Description:
The file /sys/devices/system/memory/memoryX/state
is read-write. When read, its contents show the
online/offline state of the memory section. When written,
- root can toggle the the online/offline state of a removable
+ root can toggle the online/offline state of a removable
memory section (see removable file description above)
using the following commands.
# echo online > /sys/devices/system/memory/memoryX/state
diff --git a/Documentation/DocBook/crypto-API.tmpl b/Documentation/DocBook/crypto-API.tmpl
index 04a8c24ead47..818c3c813223 100644
--- a/Documentation/DocBook/crypto-API.tmpl
+++ b/Documentation/DocBook/crypto-API.tmpl
@@ -443,7 +443,7 @@
The type flag specifies the type of the cipher algorithm.
The caller usually provides a 0 when the caller wants the
default handling. Otherwise, the caller may provide the
- following selections which match the the aforementioned
+ following selections which match the aforementioned
cipher types:
</para>
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 4e9462f1ab4c..b018892f56da 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3414,7 +3414,7 @@ giving priority to the center of the metered area.</entry>
<row>
<entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant> </entry>
<entry>A multi-zone metering. The light intensity is measured
-in several points of the frame and the the results are combined. The
+in several points of the frame and the results are combined. The
algorithm of the zones selection and their significance in calculating the
final value is device dependent.</entry>
</row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
index f4e28e7d4751..721728745407 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
@@ -267,7 +267,7 @@ is intended for still imaging applications. The idea is to get the
best possible image quality that the hardware can deliver. It is not
defined how the driver writer may achieve that; it will depend on the
hardware and the ingenuity of the driver writer. High quality mode is
-a different mode from the the regular motion video capture modes. In
+a different mode from the regular motion video capture modes. In
high quality mode:<itemizedlist>
<listitem>
<para>The driver may be able to capture higher
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index b78564b2b201..3c473ec1c885 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -113,7 +113,7 @@ Required properties (in root node):
Required nodes:
- soc: some node of the RealView platforms must be the SoC
- node that contain the SoC-specific devices, withe the compatible
+ node that contain the SoC-specific devices, with the compatible
string set to one of these tuples:
"arm,realview-eb-soc", "simple-bus"
"arm,realview-pb1176-soc", "simple-bus"
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
index 8b70db103ca7..4679bde972c6 100644
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
@@ -37,7 +37,7 @@ Required properties:
You specify supplies using the standard regulator bindings by including
-a phandle the relevant regulator. All specified supplies must be able
+a phandle to the relevant regulator. All specified supplies must be able
to report their voltage. The IO Voltage Domain for any non-specified
supplies will be not be touched.
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index aff22113a986..e54896427b4a 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -373,7 +373,7 @@ variation uses the path and optionally arg1 set to an autofs mount type.
The call returns 1 if this is a mount point and sets arg1 to the device
number of the mount and field arg2 to the relevant super block magic
number (described below) or 0 if it isn't a mountpoint. In both cases
-the the device number (as returned by new_encode_dev()) is returned
+the device number (as returned by new_encode_dev()) is returned
in field arg1.
If supplied with a file descriptor we're looking for a specific mount,
@@ -387,7 +387,7 @@ is one or 0 if it isn't a mountpoint.
If a path is supplied (and the ioctlfd field is set to -1) then the path
is looked up and is checked to see if it is the root of a mount. If a
type is also given we are looking for a particular autofs mount and if
-a match isn't found a fail is returned. If the the located path is the
+a match isn't found a fail is returned. If the located path is the
root of a mount 1 is returned along with the super magic of the mount
or 0 otherwise.
diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.txt
index 6db0e5d1da07..570ab727b379 100644
--- a/Documentation/filesystems/overlayfs.txt
+++ b/Documentation/filesystems/overlayfs.txt
@@ -162,7 +162,7 @@ rename or unlink will of course be noticed and handled).
Multiple lower layers
---------------------
-Multiple lower layers can now be given using the the colon (":") as a
+Multiple lower layers can now be given using the colon (":") as a
separator character between the directory names. For example:
mount -t overlay overlay -olowerdir=/lower1:/lower2:/lower3 /merged
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index 371361c69a4b..6bce2443f9fc 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -83,7 +83,7 @@ should contain the phy name as given in the dt data and in the case of
non-dt boot, it should contain the label of the PHY. The two
devm_phy_get associates the device with the PHY using devres on
successful PHY get. On driver detach, release function is invoked on
-the the devres data and devres data is freed. phy_optional_get and
+the devres data and devres data is freed. phy_optional_get and
devm_phy_optional_get should be used when the phy is optional. These
two functions will never return -ENODEV, but instead returns NULL when
the phy cannot be found.
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index 744f82f86c58..441dd2266531 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -453,7 +453,7 @@ putback_lru_page() function to add migrated pages back to the LRU.
mmap(MAP_LOCKED) SYSTEM CALL HANDLING
-------------------------------------
-In addition the mlock()/mlockall() system calls, an application can request
+In addition to the mlock()/mlockall() system calls, an application can request
that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9f1f09a2bc9b..6510a0fd7031 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1924,7 +1924,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
+ appended to the device tree bootargs property.
endchoice
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index d1c3f3a71c94..4f697edd0bad 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -22,7 +22,7 @@
#ifndef __ASSEMBLY__
-/* Unwind reason code according the the ARM EABI documents */
+/* Unwind reason code according to the ARM EABI documents */
enum unwind_reason_code {
URC_OK = 0, /* operation completed successfully */
URC_CONTINUE_UNWIND = 8,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 355b08936871..2a7ffd01065e 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -752,7 +752,7 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
}
/**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * _init_main_clk - get a struct clk * for the hwmod's main functional clk
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
@@ -790,7 +790,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
}
/**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
@@ -834,7 +834,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
}
/**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 01de542432a6..6f92e75b6c35 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -423,7 +423,7 @@ static void __init imote2_stargate2_init(void)
}
#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
+/* As the imote2 doesn't currently have a conventional SD slot
* there is no option to hotplug cards, making all this rather simple
*/
static int imote2_mci_get_ro(struct device *dev)
diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S
index b93170e1cc93..d0f01cff23b3 100644
--- a/arch/arm64/crypto/aes-neon.S
+++ b/arch/arm64/crypto/aes-neon.S
@@ -47,7 +47,7 @@
prepare .LReverse_Sbox, .LReverse_ShiftRows, \temp
.endm
- /* apply SubBytes transformation using the the preloaded Sbox */
+ /* apply SubBytes transformation using the preloaded Sbox */
.macro sub_bytes, in
sub v9.16b, \in\().16b, v12.16b
tbl \in\().16b, {v16.16b-v19.16b}, \in\().16b
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 86b5a095c5a1..9c8612385e00 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -480,7 +480,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
#ifdef CONFIG_EXACT_HWERR
/* Make sure all pending read/writes complete. This will ensure any
* accesses which could cause hardware errors completes, and signal
- * the the hardware before we do something silly, like crash the
+ * the hardware before we do something silly, like crash the
* kernel. We don't need to work around anomaly 05000312, since
* we are already atomic
*/
diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c
index 86318a16a252..dc21f94aaaaf 100644
--- a/arch/c6x/platforms/cache.c
+++ b/arch/c6x/platforms/cache.c
@@ -437,7 +437,7 @@ void __init c6x_cache_init(void)
if (!cache_base)
return;
- /* Set L2 caches on the the whole L2 SRAM memory */
+ /* Set L2 caches on the whole L2 SRAM memory */
L2_cache_set_mode(L2MODE_SIZE);
/* Enable L1 */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 45698cd15b7b..bd6ea40f3ef9 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -23,7 +23,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
* The pad bits in the middle are used to prevent the next_ticket number
* overflowing into the now_serving number.
*
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index 2a88c7204e52..809ddb6896db 100644
--- a/arch/ia64/include/asm/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -257,7 +257,7 @@ static inline int uv_numa_blade_id(void)
return 0;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return 0;
diff --git a/arch/m68k/coldfire/intc-2.c b/arch/m68k/coldfire/intc-2.c
index 995093357c59..f74f0e473119 100644
--- a/arch/m68k/coldfire/intc-2.c
+++ b/arch/m68k/coldfire/intc-2.c
@@ -7,7 +7,7 @@
* family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
* controllers, and the 547x and 548x families which have only one of them.
*
- * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * The external 7 fixed interrupts are part of the Edge Port unit of these
* ColdFire parts. They can be configured as level or edge triggered.
*
* (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff986a23..30052da1f1a4 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -211,7 +211,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
/*
* Get a pointer to where the new child's register block should have
* been pushed.
- * The Meta's stack grows upwards, and the context is the the first
+ * The Meta's stack grows upwards, and the context is the first
* thing to be pushed by TBX (phew)
*/
*childregs = *current_pt_regs();
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index ef548510b951..d0c28f6863b4 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -446,7 +446,7 @@ TRAP_return: /* Make global symbol for debugging */
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look like the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index bfeb8f3c0be6..203767dbeb64 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -16,7 +16,7 @@
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
* is to trigger a wakeup.
*/
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index df69bfd2b006..4ec669f5b0d4 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index)
* offsetof() to determine the offsets into packet headers.
* For example, offsetof(ethhdr, protocol) returns the offset
* of the ethernet protocol field. The bitmask selects which
- * bytes to include the the tag, with bit offset X selecting
+ * bytes to include in the tag, with bit offset X selecting
* byte at offset X from the beginning of the packet data.
* @len: Number of bytes to include. Usually this is the sizeof()
* the field.
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index b4548690ade9..98bea1038f46 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -32,7 +32,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*/
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index c9eccf5df912..d7ef0ef31b09 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -1166,7 +1166,7 @@ int __init kvm_mips_init(void)
* requires TLBs. The TLB handling code is statically linked with
* the rest of the kernel (tlb.c) to avoid the possibility of
* double faulting. The issue is that the TLB code references
- * routines that are part of the the KVM module, which are only
+ * routines that are part of the KVM module, which are only
* available once the module is loaded.
*/
kvm_mips_gfn_to_pfn = gfn_to_pfn;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 05b1d7cf9514..1647426364b9 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -350,7 +350,7 @@ static void co_cache_error_call_notifiers(unsigned long val)
}
/*
- * Called when the the exception is recoverable
+ * Called when the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -359,7 +359,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
}
/**
- * Called when the the exception is not recoverable
+ * Called when the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d428e8471eec..1d1eb1e10ae2 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -144,7 +144,7 @@ void xlr_percpu_fmn_init(void)
* For sending FMN messages, we need credits on the destination
* bucket. Program the credits this core has on the 128 possible
* destination buckets.
- * We cannot use a loop here, because the the first argument has
+ * We cannot use a loop here, because the first argument has
* to be a constant integer value.
*/
COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 34a05a1a990b..af6f17b32531 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -52,7 +52,7 @@ static inline void logmpp(u64 x)
/*
* For a snooping icache, we still need a dummy icbi to purge all the
* prefetched instructions from the ifetch buffers. We also need a sync
- * before the icbi to order the the actual stores to memory that might
+ * before the icbi to order the actual stores to memory that might
* have modified instructions with the icbi.
*/
#define PURGE_PREFETCHED_INS \
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index 334459ad145b..b3219b0ca2c4 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -246,7 +246,7 @@ static inline unsigned int ev_int_get_mask(unsigned int interrupt,
* ev_int_eoi - signal the end of interrupt processing
* @interrupt: the interrupt number
*
- * This function signals the end of processing for the the specified
+ * This function signals the end of processing for the specified
* interrupt, which must be the interrupt currently in service. By
* definition, this is also the highest-priority interrupt.
*
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index ac6432d9be46..a18702780733 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -30,7 +30,7 @@ struct arch_hw_breakpoint {
u16 len; /* length of the target data symbol */
};
-/* Note: Don't change the the first 6 bits below as they are in the same order
+/* Note: Don't change the first 6 bits below as they are in the same order
* as the dabr and dabrx.
*/
#define HW_BRK_TYPE_READ 0x01
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index d48125d0c048..01ecece4ca83 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -94,7 +94,7 @@ __secondary_hold_acknowledge:
#ifdef CONFIG_RELOCATABLE
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
- * is used by kexec-tools to keep the the kdump kernel in the
+ * is used by kexec-tools to keep the kdump kernel in the
* crash_kernel region. The loader is responsible for
* observing the alignment requirement.
*/
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
new file mode 100644
index 000000000000..a97b81d5cfa6
--- /dev/null
+++ b/arch/powerpc/mm/gup.c
@@ -0,0 +1,235 @@
+/*
+ * Lockless get_user_pages_fast for powerpc
+ *
+ * Copyright (C) 2008 Nick Piggin
+ * Copyright (C) 2008 Novell Inc.
+ */
+#undef DEBUG
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/vmstat.h>
+#include <linux/pagemap.h>
+#include <linux/rwsem.h>
+#include <asm/pgtable.h>
+
+#ifdef __HAVE_ARCH_PTE_SPECIAL
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+ unsigned long end, int write, struct page **pages, int *nr)
+{
+ unsigned long mask, result;
+ pte_t *ptep;
+
+ result = _PAGE_PRESENT|_PAGE_USER;
+ if (write)
+ result |= _PAGE_RW;
+ mask = result | _PAGE_SPECIAL;
+
+ ptep = pte_offset_kernel(&pmd, addr);
+ do {
+ pte_t pte = ACCESS_ONCE(*ptep);
+ struct page *page;
+ /*
+ * Similar to the PMD case, NUMA hinting must take slow path
+ */
+ if (pte_numa(pte))
+ return 0;
+
+ if ((pte_val(pte) & mask) != result)
+ return 0;
+ VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+ page = pte_page(pte);
+ if (!page_cache_get_speculative(page))
+ return 0;
+ if (unlikely(pte_val(pte) != pte_val(*ptep))) {
+ put_page(page);
+ return 0;
+ }
+ pages[*nr] = page;
+ (*nr)++;
+
+ } while (ptep++, addr += PAGE_SIZE, addr != end);
+
+ return 1;
+}
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+ int write, struct page **pages, int *nr)
+{
+ unsigned long next;
+ pmd_t *pmdp;
+
+ pmdp = pmd_offset(&pud, addr);
+ do {
+ pmd_t pmd = ACCESS_ONCE(*pmdp);
+
+ next = pmd_addr_end(addr, end);
+ /*
+ * If we find a splitting transparent hugepage we
+ * return zero. That will result in taking the slow
+ * path which will call wait_split_huge_page()
+ * if the pmd is still in splitting state
+ */
+ if (pmd_none(pmd) || pmd_trans_splitting(pmd))
+ return 0;
+ if (pmd_huge(pmd) || pmd_large(pmd)) {
+ /*
+ * NUMA hinting faults need to be handled in the GUP
+ * slowpath for accounting purposes and so that they
+ * can be serialised against THP migration.
+ */
+ if (pmd_numa(pmd))
+ return 0;
+
+ if (!gup_hugepte((pte_t *)pmdp, PMD_SIZE, addr, next,
+ write, pages, nr))
+ return 0;
+ } else if (is_hugepd(pmdp)) {
+ if (!gup_hugepd((hugepd_t *)pmdp, PMD_SHIFT,
+ addr, next, write, pages, nr))
+ return 0;
+ } else if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+ return 0;
+ } while (pmdp++, addr = next, addr != end);
+
+ return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+ int write, struct page **pages, int *nr)
+{
+ unsigned long next;
+ pud_t *pudp;
+
+ pudp = pud_offset(&pgd, addr);
+ do {
+ pud_t pud = ACCESS_ONCE(*pudp);
+
+ next = pud_addr_end(addr, end);
+ if (pud_none(pud))
+ return 0;
+ if (pud_huge(pud)) {
+ if (!gup_hugepte((pte_t *)pudp, PUD_SIZE, addr, next,
+ write, pages, nr))
+ return 0;
+ } else if (is_hugepd(pudp)) {
+ if (!gup_hugepd((hugepd_t *)pudp, PUD_SHIFT,
+ addr, next, write, pages, nr))
+ return 0;
+ } else if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+ return 0;
+ } while (pudp++, addr = next, addr != end);
+
+ return 1;
+}
+
+int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
+ struct page **pages)
+{
+ struct mm_struct *mm = current->mm;
+ unsigned long addr, len, end;
+ unsigned long next;
+ unsigned long flags;
+ pgd_t *pgdp;
+ int nr = 0;
+
+ pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+
+ start &= PAGE_MASK;
+ addr = start;
+ len = (unsigned long) nr_pages << PAGE_SHIFT;
+ end = start + len;
+
+ if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+ start, len)))
+ return 0;
+
+ pr_devel(" aligned: %lx .. %lx\n", start, end);
+
+ /*
+ * XXX: batch / limit 'nr', to avoid large irq off latency
+ * needs some instrumenting to determine the common sizes used by
+ * important workloads (eg. DB2), and whether limiting the batch size
+ * will decrease performance.
+ *
+ * It seems like we're in the clear for the moment. Direct-IO is
+ * the main guy that batches up lots of get_user_pages, and even
+ * they are limited to 64-at-a-time which is not so many.
+ */
+ /*
+ * This doesn't prevent pagetable teardown, but does prevent
+ * the pagetables from being freed on powerpc.
+ *
+ * So long as we atomically load page table pointers versus teardown,
+ * we can follow the address down to the page and take a ref on it.
+ */
+ local_irq_save(flags);
+
+ pgdp = pgd_offset(mm, addr);
+ do {
+ pgd_t pgd = ACCESS_ONCE(*pgdp);
+
+ pr_devel(" %016lx: normal pgd %p\n", addr,
+ (void *)pgd_val(pgd));
+ next = pgd_addr_end(addr, end);
+ if (pgd_none(pgd))
+ break;
+ if (pgd_huge(pgd)) {
+ if (!gup_hugepte((pte_t *)pgdp, PGDIR_SIZE, addr, next,
+ write, pages, &nr))
+ break;
+ } else if (is_hugepd(pgdp)) {
+ if (!gup_hugepd((hugepd_t *)pgdp, PGDIR_SHIFT,
+ addr, next, write, pages, &nr))
+ break;
+ } else if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+ break;
+ } while (pgdp++, addr = next, addr != end);
+
+ local_irq_restore(flags);
+
+ return nr;
+}
+
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+ struct page **pages)
+{
+ struct mm_struct *mm = current->mm;
+ int nr, ret;
+
+ start &= PAGE_MASK;
+ nr = __get_user_pages_fast(start, nr_pages, write, pages);
+ ret = nr;
+
+ if (nr < nr_pages) {
+ pr_devel(" slow path ! nr = %d\n", nr);
+
+ /* Try to get the remaining pages with get_user_pages */
+ start += nr << PAGE_SHIFT;
+ pages += nr;
+
+ down_read(&mm->mmap_sem);
+ ret = get_user_pages(current, mm, start,
+ nr_pages - nr, write, 0, pages, NULL);
+ up_read(&mm->mmap_sem);
+
+ /* Have to be a bit careful with return values */
+ if (nr > 0) {
+ if (ret < 0)
+ ret = nr;
+ else
+ ret += nr;
+ }
+ }
+
+ return ret;
+}
+
+#endif /* __HAVE_ARCH_PTE_SPECIAL */
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 7e408bfc7948..5b381759bbf0 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -948,7 +948,7 @@ void flush_dcache_icache_hugepage(struct page *page)
* (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table
*
* So long as we atomically load page table pointers we are safe against teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index c949ca055712..27cc1a222295 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -9,7 +9,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * This file is a driver for the the General Purpose Timer (gpt) devices
+ * This file is a driver for the General Purpose Timer (gpt) devices
* found on the MPC5200 SoC. Each timer has an IO pin which can be used
* for GPIO or can be used to raise interrupts. The timer function can
* be used independently from the IO pin, or it can be used to control
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 860a59eb8ea2..08d0a3c447a0 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -251,7 +251,7 @@ static void briq_restart(char *cmd)
* Per default, input/output-device points to the keyboard/screen
* If no card is installed, the built-in serial port is used as a fallback.
* But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
- * the the built-in serial node. Instead, a /failsafe node is created.
+ * to the built-in serial node. Instead, a /failsafe node is created.
*/
static void chrp_init_early(void)
{
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 6c9ff2b95119..f3c0a7ace5bf 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1733,7 +1733,7 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
/*
* This function is supposed to be called on basis of PE from top
- * to bottom style. So the the I/O or MMIO segment assigned to
+ * to bottom style. So the I/O or MMIO segment assigned to
* parent PE could be overrided by its child PEs if necessary.
*/
static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index e599259d84fc..e1766153202e 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -293,7 +293,7 @@ static void write_ciabr(unsigned long ciabr)
* set_ciabr() - set the CIABR
* @addr: The value to set.
*
- * This function sets the correct privilege value into the the HW
+ * This function sets the correct privilege value into the HW
* breakpoint address before writing it up in the CIABR register.
*/
static void set_ciabr(unsigned long addr)
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index c3f8d157cb0d..318ce6ad46cd 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1128,7 +1128,7 @@ static void debug_sample_entry(struct hws_combined_entry *sample,
* combined-sampling data entry consists of a basic- and a diagnostic-sampling
* data entry. The sampling function is determined by the flags in the perf
* event hardware structure. The function always works with a combined-sampling
- * data entry but ignores the the diagnostic portion if it is not available.
+ * data entry but ignores the diagnostic portion if it is not available.
*
* Note that the implementation focuses on basic-sampling data entries and, if
* such an entry is not valid, the entire combined-sampling data entry is
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 5c586c78ca8d..5d4376f117d2 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -187,7 +187,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* prevent the pagetables from being freed on s390.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 9ce5afe167ff..ec780d885a4c 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -306,7 +306,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
+ * firmware can sample the value before the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index 2e5c4fc2daa9..d2154ab0bfe2 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -219,7 +219,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on sparc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_disable();
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 60d62a292fce..a9554b167e96 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -116,7 +116,7 @@
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
* Likewise, INTCTRL_K is removed and re-added during device
- * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * interrupts, as is the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
* to know our current state.
diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h
index df10a662cc25..50a3d5cbad20 100644
--- a/arch/tile/include/gxio/trio.h
+++ b/arch/tile/include/gxio/trio.h
@@ -206,7 +206,7 @@ typedef struct {
/* Initialize a TRIO context.
*
* This function allocates a TRIO "service domain" and maps the MMIO
- * registers into the the caller's VA space.
+ * registers into the caller's VA space.
*
* @param trio_index Which TRIO shim; Gx36 must pass 0.
* @param context Context object to be initialized.
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index 862973074bf9..b4b9ddfb737d 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -275,7 +275,7 @@ P("\n");
/*
* Called after execve() has started the new image. This allows us
- * to reset the info state. Note that the the mmap'ed memory, if there
+ * to reset the info state. Note that the mmap'ed memory, if there
* was any, has already been unmapped by the exec.
*/
void single_step_execve(void)
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index cf87de3fc390..15d1b0a8eff8 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -91,7 +91,7 @@ static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*
* We use an xadd covering *both* parts of the lock, to increment the tail and
* also load the position of the head, which takes care of memory ordering
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index a00ad8f2a657..3260b75fd427 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -512,7 +512,7 @@ static inline int uv_numa_blade_id(void)
return uv_hub_info->numa_blade_id;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return uv_cpu_to_blade[cpu];
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 1d74d161687c..bd0c61cf5991 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -365,7 +365,7 @@ system_call_fastpath:
*/
ret_from_sys_call:
testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
- jnz int_ret_from_sys_call_fixup /* Go the the slow path */
+ jnz int_ret_from_sys_call_fixup /* Go to the slow path */
LOCKDEP_SYS_EXIT
DISABLE_INTERRUPTS(CLBR_NONE)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 32bf19ef3115..f4b39a837846 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7400,7 +7400,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
if (current->mm == kvm->mm) {
/*
* Free memory regions allocated on behalf of userspace,
- * unless the the memory map has changed due to process exit
+ * unless the memory map has changed due to process exit
* or fd copying.
*/
struct kvm_userspace_memory_region mem;
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 81bf3d2af3eb..5862a503e0fa 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -288,7 +288,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
@@ -360,7 +360,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_disable();
pgdp = pgd_offset(mm, addr);
diff --git a/arch/x86/platform/efi/efi_thunk_64.S b/arch/x86/platform/efi/efi_thunk_64.S
index ff85d28c50f2..13f24526ccd0 100644
--- a/arch/x86/platform/efi/efi_thunk_64.S
+++ b/arch/x86/platform/efi/efi_thunk_64.S
@@ -7,7 +7,7 @@
* The below thunking functions are only used after ExitBootServices()
* has been called. This simplifies things considerably as compared with
* the early EFI thunking because we can leave all the kernel state
- * intact (GDT, IDT, etc) and simply invoke the the 32-bit EFI runtime
+ * intact (GDT, IDT, etc) and simply invoke the 32-bit EFI runtime
* services from __KERNEL32_CS. This means we can continue to service
* interrupts across an EFI mixed mode call.
*
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 55f388ef481a..e0adc53e9645 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -689,7 +689,7 @@ char * __init xen_memory_setup(void)
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
- * We tried to make the the memblock_reserve more selective so
+ * We tried to make the memblock_reserve more selective so
* that it would be clear what region is reserved. Sadly we ran
* in the problem wherein on a 64-bit hypervisor with a 32-bit
* initial domain, the pt_base has the cr3 value which is not
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index e256f2270ec9..23f291682f84 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -6,7 +6,7 @@
* For the new V3 MMU we remap the TLB from virtual == physical
* to the standard Linux mapping used in earlier MMU's.
*
- * The the MMU we also support a new configuration register that
+ * In the MMU we also support a new configuration register that
* specifies how the S32C1I instruction operates with the cache
* controller.
*
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 82bbfa5a05b3..94044cc958c2 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -384,7 +384,7 @@ common_exception:
/* Save optional registers. */
save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
-
+
#ifdef CONFIG_TRACE_IRQFLAGS
l32i a4, a1, PT_DEPC
/* Double exception means we came here with an exception
@@ -433,7 +433,7 @@ common_exception_return:
* We need to check some flags for signal handling and rescheduling,
* and have to restore WB and WS, extra states, and all registers
* in the register file that were in use in the user task.
- * Note that we don't disable interrupts here.
+ * Note that we don't disable interrupts here.
*/
_bbsi.l a4, TIF_NEED_RESCHED, 3f
@@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
* of the proper size instead.
*
* This algorithm simply backs out the register changes started by the user
- * excpetion handler, makes it appear that we have started a window underflow
+ * exception handler, makes it appear that we have started a window underflow
* by rotating the window back and then setting the old window base (OWB) in
* the 'ps' register with the rolled back window base. The 'movsp' instruction
* will be re-executed and this time since the next window frames is in the
* active AR registers it won't cause an exception.
*
* If the WindowUnderflow code gets a TLB miss the page will get mapped
- * the the partial windeowUnderflow will be handeled in the double exception
+ * and the partial window underflow will be handled in the double exception
* handler.
*
* Entry condition:
@@ -1567,8 +1567,8 @@ ENTRY(fast_second_level_miss)
2: /* Special case for cache aliasing.
* We (should) only get here if a clear_user_page, copy_user_page
- * or the aliased cache flush functions got preemptively interrupted
- * by another task. Re-establish temporary mapping to the
+ * or the aliased cache flush functions got preemptively interrupted
+ * by another task. Re-establish temporary mapping to the
* TLBTEMP_BASE areas.
*/
diff --git a/crypto/asymmetric_keys/pkcs7_parser.h b/crypto/asymmetric_keys/pkcs7_parser.h
index efc7dc9b8f9c..0e51bec18672 100644
--- a/crypto/asymmetric_keys/pkcs7_parser.h
+++ b/crypto/asymmetric_keys/pkcs7_parser.h
@@ -40,7 +40,7 @@ struct pkcs7_signed_info {
*
* This contains the generated digest of _either_ the Content Data or
* the Authenticated Attributes [RFC2315 9.3]. If the latter, one of
- * the attributes contains the digest of the the Content Data within
+ * the attributes contains the digest of the Content Data within
* it.
*/
struct public_key_signature sig;
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 853aa2dbdb61..898c59164ec6 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -47,7 +47,7 @@
/*
* Common set of includes for all ACPICA source files.
* We put them here because we don't want to duplicate them
- * in the the source code again and again.
+ * in the source code again and again.
*
* Note: The order of these include files is important.
*/
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 7d2486005e3f..b9b082980926 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -435,7 +435,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
* The 64-bit X fields are optional extensions to the original 32-bit FADT
* V1.0 fields. Even if they are present in the FADT, they are optional and
* are unused if the BIOS sets them to zero. Therefore, we must copy/expand
- * 32-bit V1.0 fields to the 64-bit X fields if the the 64-bit X field is
+ * 32-bit V1.0 fields to the 64-bit X fields if the 64-bit X field is
* originally zero.
*
* For ACPI 1.0 FADTs (that contain no 64-bit addresses), all 32-bit address
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index dd9dfa15e9d1..d086acf9562f 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -563,7 +563,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
wake_up_interruptible(&apm_waitqueue);
/*
- * Wait for the the suspend_acks_pending variable to drop to
+ * Wait for the suspend_acks_pending variable to drop to
* zero, meaning everybody acked the suspend event (or the
* process was killed.)
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 02225eb19cf6..619f3a30ec55 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -111,7 +111,7 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
}
/**
- * fifo_icap_set_read_size - Set the the size register.
+ * fifo_icap_set_read_size - Set the size register.
* @drvdata: a pointer to the drvdata.
* @data: the size of the following read transaction, in words.
**/
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index 2697e87d5b34..0cf96de565c1 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -168,7 +168,7 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv)
/*
* Look for the timer stop flag in the different states, so that we know
* if the broadcast timer has to be set up. The loop is in the reverse
- * order, because usually one of the deeper states have this flag set.
+ * order, because usually one of the deeper states has this flag set.
*/
for (i = drv->state_count - 1; i >= 0 ; i--) {
if (drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP) {
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 5da5b98b8f29..60f2267c1350 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -53,7 +53,7 @@
#define CMD0_IRQ_THRESHOLD 1
/*
- * The timeout period (in jiffies) for a PDU. When the the number of PDUs in
+ * The timeout period (in jiffies) for a PDU. When the number of PDUs in
* flight is greater than the STAT_IRQ_THRESHOLD or 0 the timer is disabled.
* When there are packets in flight but lower than the threshold, we enable
* the timer and at expiry, attempt to remove any processed packets from the
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 187a8fd7eee7..75b0d3dce17c 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -435,7 +435,7 @@ static int hash_get_device_data(struct hash_ctx *ctx,
* @keylen: The lengt of the key.
*
* Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the the hw design spec. Either due to incorrect info in the
+ * specified in the hw design spec. Either due to incorrect info in the
* spec or due to a bug in the hw.
*/
static void hash_hw_write_key(struct hash_device_data *device_data,
diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c
index 228bbf910461..d028f44916cc 100644
--- a/drivers/firmware/efi/runtime-wrappers.c
+++ b/drivers/firmware/efi/runtime-wrappers.c
@@ -82,7 +82,7 @@ static DEFINE_SPINLOCK(efi_runtime_lock);
* In order to prevent deadlocks under NMI, the wrappers for these functions
* may only grab the efi_runtime_lock or rtc_lock spinlocks if !efi_in_nmi().
* However, not all of the services listed are reachable through NMI code paths,
- * so the the special handling as suggested by the UEFI spec is only implemented
+ * so the special handling as suggested by the UEFI spec is only implemented
* for QueryVariableInfo() and SetVariable(), as these can be reached in NMI
* context through efi_pstore_write().
*/
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 7818cd1453ae..950d02ab6e61 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -471,7 +471,7 @@ static int ichx_gpio_probe(struct platform_device *pdev)
/*
* If necessary, determine the I/O address of ACPI/power management
- * registers which are needed to read the the GPE0 register for GPI pins
+ * registers which are needed to read the GPE0 register for GPI pins
* 0 - 15 on some chipsets.
*/
if (!ichx_priv.desc->uses_gpe0)
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index b72906f5b999..1c24057610c3 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -131,7 +131,7 @@ static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned gpio_num,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
index 488f51d19427..96e6f204f66c 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
@@ -64,7 +64,7 @@ struct device_process_node {
*
* @initialize: Initializes the pipelines and memory module for that device.
*
- * @start: Initializes the resources/modules the the device needs for queues
+ * @start: Initializes the resources/modules that the device needs for queues
* execution. This function is called on device initialization and after the
* system woke up after suspension.
*
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index f6d04c7b5115..f7a369f579fc 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1634,7 +1634,7 @@ EXPORT_SYMBOL(drm_mode_create_dirty_info_property);
* drm_mode_create_suggested_offset_properties - create suggests offset properties
* @dev: DRM device
*
- * Create the the suggested x/y offset property for connectors.
+ * Create the suggested x/y offset property for connectors.
*/
int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
{
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 1134526286c8..8fbb82448a16 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -537,12 +537,12 @@ EXPORT_SYMBOL(drm_mm_replace_node);
*
* The DRM range allocator supports this use-case through the scanning
* interfaces. First a scan operation needs to be initialized with
- * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The the driver adds
+ * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The driver adds
* objects to the roaster (probably by walking an LRU list, but this can be
* freely implemented) until a suitable hole is found or there's no further
* evitable object.
*
- * The the driver must walk through all objects again in exactly the reverse
+ * The driver must walk through all objects again in exactly the reverse
* order to restore the allocator state. Note that while the allocator is used
* in the scan mode no other operation is allowed.
*
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 5b205863b659..0562b9593062 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2465,7 +2465,7 @@ int __i915_add_request(struct intel_engine_cs *ring,
/* Whilst this request exists, batch_obj will be on the
* active_list, and so will hold the active reference. Only when this
- * request is retired will the the batch_obj be moved onto the
+ * request is retired will the batch_obj be moved onto the
* inactive_list and lose its active reference. Hence we do not need
* to explicitly hold another reference here.
*/
diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c
index 1719078c763a..9f61665e9cb1 100644
--- a/drivers/gpu/drm/i915/i915_gem_userptr.c
+++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
@@ -241,7 +241,7 @@ i915_mmu_notifier_add(struct drm_device *dev,
* either has cancelled gup work queued and we need to
* return back to the user to give time for the gup-workers
* to flush their object references upon which the object will
- * be removed from the interval-tree, or the the range is
+ * be removed from the interval-tree, or the range is
* still in use by another client and the overlap is invalid.
*
* If we do have an overlap, we cannot use the interval tree
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 6d22128d97b1..1d50e2e2822e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2904,7 +2904,7 @@ void intel_finish_reset(struct drm_device *dev)
/*
* Flips in the rings have been nuked by the reset,
* so update the base address of all primary
- * planes to the the last fb to make sure we're
+ * planes to the last fb to make sure we're
* showing the correct fb after a reset.
*/
intel_update_primary_planes(dev);
@@ -11162,7 +11162,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
}
/* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
+ * update the output configuration. */
intel_modeset_update_state(dev, prepare_pipes);
modeset_update_crtc_power_domains(dev);
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 92be50c39ffd..2be3040b28f1 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -2802,8 +2802,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t
ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 00c0d2ba22d3..36af5f14f622 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -353,7 +353,7 @@
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index bd7519fdd3f4..fa3512763c50 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -410,7 +410,7 @@ void radeon_doorbell_get_kfd_info(struct radeon_device *rdev,
/*
* radeon_wb_*()
- * Writeback is the the method by which the the GPU updates special pages
+ * Writeback is the method by which the GPU updates special pages
* in memory with the status of certain GPU events (fences, ring pointers,
* etc.).
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index df09ca7c4889..98311ab2b5ba 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -45,7 +45,7 @@
* for GPU/CPU synchronization. When the fence is written,
* it is expected that all buffers associated with that fence
* are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed. Whether
+ * that the relevant GPU caches have been flushed. Whether
* we use a scratch register or memory location depends on the asic
* and whether writeback is enabled.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c
index 2a5a4a9e772d..9c987173cd81 100644
--- a/drivers/gpu/drm/radeon/radeon_vm.c
+++ b/drivers/gpu/drm/radeon/radeon_vm.c
@@ -40,8 +40,8 @@
* can be mapped as snooped (cached system pages) or unsnooped
* (uncached system pages).
* Each VM has an ID associated with it and there is a page table
- * associated with each VMID. When execting a command buffer,
- * the kernel tells the the ring what VMID to use for that command
+ * associated with each VMID. When executing a command buffer,
+ * the kernel tells the ring what VMID to use for that command
* buffer. VMIDs are allocated dynamically as commands are submitted.
* The userspace drivers maintain their own address space and the kernel
* sets up their pages tables accordingly when they submit their
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 2978f5ee8d2a..865ad3093211 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -573,7 +573,7 @@ EXPORT_SYMBOL_GPL(vmbus_close);
* vmbus_sendpacket() - Send the specified buffer on the given channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @requestid: Identifier of the request
* @type: Type of packet that is being send e.g. negotiate, time
* packet etc.
@@ -794,7 +794,7 @@ EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
* vmbus_recvpacket() - Retrieve the user packet on the specified channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @buffer_actual_len: The actual size of the data after it was received
* @requestid: Identifier of the request
*
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index f518b8d7a5b5..f9196aabf890 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -882,8 +882,8 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the information we
- * need from DSDT.
+ * VMBUS is an acpi enumerated device. Get the IRQ information
+ * from DSDT.
*/
static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index 033d6aca47d3..d41d7e3bf31c 100644
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -117,7 +117,7 @@ static int ucd9200_probe(struct i2c_client *client,
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
- * for the the phases of the rail.
+ * for the phases of the rail.
*/
for (i = 0; i < info->pages; i++) {
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 28cfe97cf1e9..231b54591e2b 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -87,7 +87,7 @@
* These 3 values (SDR and DDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
+ * are also the possible values for ipath_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define IPATH_IB_SDR 1
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index ffd48bfc4923..43b6e64411d1 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -333,7 +333,7 @@ struct qib_verbs_txreq {
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for qib_link_speed_enabled and active
+ * are also the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index ced07391304b..a4ab4452e19b 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -17,7 +17,7 @@
/*
* Timer function which is run every scan_ms ms when the device is opened.
- * The dev input variable is set to the the input_dev pointer.
+ * The dev input variable is set to the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_polled_dev *dev)
{
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 114f3bcba1b0..24c15bfb2199 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1566,7 +1566,7 @@ reset_hfcsusb(struct hfcsusb *hw)
write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
((hw->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 7dc93aa004c8..ff8e9a523b64 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -202,7 +202,7 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
/*:*/
/*H:030
- * Let's jump straight to the the main loop which runs the Guest.
+ * Let's jump straight to the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
* going around and around until something interesting happens.
*/
diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h
index e404b6e44802..ce0fb855c705 100644
--- a/drivers/media/dvb-frontends/tda1002x.h
+++ b/drivers/media/dvb-frontends/tda1002x.h
@@ -1,6 +1,6 @@
/*
TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index 71fb63299de7..17534ff576ca 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1134,7 +1134,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
state->pll_pfactor = 0;
}
- /* Establish any defaults the the user didn't pass */
+ /* Establish any defaults the user didn't pass */
tda10048_establish_defaults(&state->frontend);
/* Set the xtal and freq defaults */
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..1f8820f5f8c0 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -37,7 +37,7 @@
(compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
/* We calculate the baseband frequencies of the carrier and the pilot tones
- * based on the the sampling rate of the audio rds fifo. */
+ * based on the sampling rate of the audio rds fifo. */
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index 2ad65eb29832..00e0818abfc9 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -555,7 +555,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f)
reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94);
/* Okay, we've wasted time working out the correct value,
- but if we use it, it fouls the the window alignment.
+ but if we use it, it fouls the window alignment.
Fudge it to what we want... */
reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16));
reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16));
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 4b0bec3766ed..100d81e1b770 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -635,7 +635,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
}
/* Check that the hardware is accessible. If the status bytes are
- * 0xFF then the device is not accessible, the the IRQ belongs
+ * 0xFF then the device is not accessible, the IRQ belongs
* to another driver.
* 4 x u32 interrupt registers.
*/
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 9a6c2cc38acb..add8613b4e05 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -316,7 +316,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
* vpbe_get_output - Get output
* @vpbe_dev - vpbe device ptr
*
- * return current vpbe output to the the index
+ * return current vpbe output to the index
*/
static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
{
diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 8a2fd8c33d42..d92eb5634d04 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -505,7 +505,7 @@ static int fimc_capture_open(struct file *file)
if (ret == 0 && vc->user_subdev_api && vc->inh_sensor_ctrls) {
/*
- * Recreate controls of the the video node to drop
+ * Recreate controls of the video node to drop
* any controls inherited from the sensor subdev.
*/
fimc_ctrls_delete(vc->ctx);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index deca80903c3a..27b8c49da605 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1701,7 +1701,7 @@ void omap3isp_print_status(struct isp_device *isp)
* To solve this problem power management support is split into prepare/complete
* and suspend/resume operations. The pipelines are stopped in prepare() and the
* ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
- * resume(), and the the pipelines are restarted in complete().
+ * resume(), and the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not modelled explicitly
* yet.
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index d56f927fc31a..b5d2e805380d 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 474a17e4db0c..4c7f8fed8046 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h
index 0f461ca10cb9..82d19dcdebc0 100644
--- a/drivers/media/usb/dvb-usb/friio.h
+++ b/drivers/media/usb/dvb-usb/friio.h
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
index 52bdb569760b..414c1b752911 100644
--- a/drivers/media/usb/gspca/finepix.c
+++ b/drivers/media/usb/gspca/finepix.c
@@ -143,7 +143,7 @@ again:
* for, then it's the end of the
* frame. Sometimes the jpeg is not complete,
* but there's nothing we can do. We also end
- * here if the the jpeg ends right at the end
+ * here if the jpeg ends right at the end
* of the frame. */
gspca_frame_add(gspca_dev, LAST_PACKET,
data, len);
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 2e8c3afe4ec4..b7b5a1f630af 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1313,7 +1313,7 @@ static int tm6000_usb_probe(struct usb_interface *interface,
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
-/* check if the the device has the iso in endpoint at the correct place */
+/* check if the device has the iso in endpoint at the correct place */
if (!dev->isoc_in.endp) {
printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
rc = -ENODEV;
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 20ccc9d315dc..9ababe952b56 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1000,7 +1000,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
}
/* Synchronize to the input stream by waiting for the FID bit to be
- * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE.
* stream->last_fid is initialized to -1, so the first isochronous
* frame will always be in sync.
*
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index b08407225db1..2c8ce861e6ea 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -984,7 +984,7 @@ static void v4l_sanitize_format(struct v4l2_format *fmt)
/*
* The v4l2_pix_format structure has been extended with fields that were
* not previously required to be set to zero by applications. The priv
- * field, when set to a magic value, indicates the the extended fields
+ * field, when set to a magic value, indicates that the extended fields
* are valid. Otherwise they will contain undefined values. To simplify
* the API towards drivers zero the extended fields and set the priv
* field to the magic value when the extended pixel format structure
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 04644e7b42b1..303b322756c7 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -373,7 +373,7 @@ static const struct lpddr2_addressing *get_addressing_table(
}
/*
- * Find the the right timing table from the array of timing
+ * Find the right timing table from the array of timing
* tables of the device using DDR clock frequency
*/
static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 613231c16194..4591bd235a00 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
* @target: per target private data
* @sdev: SCSI device
*
- * Update the target negotiation parameters based on the the Inquiry
+ * Update the target negotiation parameters based on the Inquiry
* data, adapter capabilities, and NVRAM settings.
**/
static void
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index cc1a404328c2..69f256d6a3ed 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -889,7 +889,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
- * This function sets the the operating point of the ARM.
+ * This function sets the operating point of the ARM.
*/
int db8500_prcmu_set_arm_opp(u8 opp)
{
diff --git a/drivers/misc/mic/bus/mic_bus.c b/drivers/misc/mic/bus/mic_bus.c
index 961ae90aae47..1b15af8c5101 100644
--- a/drivers/misc/mic/bus/mic_bus.c
+++ b/drivers/misc/mic/bus/mic_bus.c
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ drivers/virtio/virtio.c
*/
#include <linux/slab.h>
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 913de07e577c..6482a9c4eb44 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -48,7 +48,7 @@
* kernel/user requirements.
*
* Blade percpu resources reserved for kernel use. These resources are
- * reserved whenever the the kernel context for the blade is loaded. Note
+ * reserved whenever the kernel context for the blade is loaded. Note
* that the kernel context is not guaranteed to be always available. It is
* loaded on demand & can be stolen by a user if the user demand exceeds the
* kernel demand. The kernel can always reload the kernel context but
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 95c894482fdd..f87520cfb787 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1594,7 +1594,7 @@ out_2:
* by xpc_notify_senders_of_disconnect_uv(), and to also get an
* error returned here will confuse them. Additionally, since
* in this case the channel is being disconnected we don't need
- * to put the the msg_slot back on the free list.
+ * to put the msg_slot back on the free list.
*/
if (cmpxchg(&msg_slot->func, func, NULL) != func) {
ret = xpSuccess;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 33f3c3c54dbc..6429d9cc6aa1 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -946,7 +946,7 @@ static uint8_t gpmi_read_byte(struct mtd_info *mtd)
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
- * because the the operations are the same.
+ * because the operations are the same.
*/
static void block_mark_swapping(struct gpmi_nand_data *this,
void *payload, void *auxiliary)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index c5be82d9d345..397daa315e45 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -253,7 +253,7 @@ struct ubi_fm_pool {
/**
* struct ubi_volume - UBI volume description data structure.
- * @dev: device object to make use of the the Linux device model
+ * @dev: device object to make use of the Linux device model
* @cdev: character device object to create character device
* @ubi: reference to the UBI device description object
* @vol_id: volume ID
@@ -384,7 +384,7 @@ struct ubi_debug_info {
/**
* struct ubi_device - UBI device description structure
- * @dev: UBI device object to use the the Linux device model
+ * @dev: UBI device object to use for the Linux device model
* @cdev: character device object to create character device
* @ubi_num: UBI device number
* @ubi_name: UBI device name
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 8f7bde6a85d6..679e90915895 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -728,7 +728,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
/**
* sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
- * @e: the the physical eraseblock to erase
+ * @e: the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
*
* This function returns zero in case of success and a negative error code in
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 6c6764312285..82af8c28ca5c 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -533,7 +533,7 @@ static int xcan_rx(struct net_device *ndev)
* @isr: interrupt status register value
*
* This is the CAN error interrupt and it will
- * check the the type of error and forward the error
+ * check the type of error and forward the error
* frame to upper layers.
*/
static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c
index e0f3d197e7f2..e02ffda21bce 100644
--- a/drivers/net/ethernet/agere/et131x.c
+++ b/drivers/net/ethernet/agere/et131x.c
@@ -1109,7 +1109,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
writel(0, &rxmac->mif_ctrl);
writel(0, &rxmac->space_avail);
- /* Initialize the the mif_ctrl register
+ /* Initialize the mif_ctrl register
* bit 3: Receive code error. One or more nibbles were signaled as
* errors during the reception of the packet. Clear this
* bit in Gigabit, set it in 100Mbit. This was derived
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index 47bfea24b9e1..b93c11cd3b73 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1234,7 +1234,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
* @budget : maximum number of packets that the current CPU can receive from
* all interfaces.
* Description :
- * This function implements the the reception process.
+ * This function implements the reception process.
* Also it runs the TX completion thread
*/
static int xgmac_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index e6b790f0d9dc..a3b5c3de146b 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2465,7 +2465,7 @@ static irqreturn_t be_intx(int irq, void *dev)
}
be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- /* Return IRQ_HANDLED only for the the first spurious intr
+ /* Return IRQ_HANDLED only for the first spurious intr
* after a valid intr to stop the kernel from branding
* this irq as a bad one!
*/
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 45c8c864104e..960e5fa4fb7b 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -3986,7 +3986,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
* @hw: Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*/
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 48b74a549155..392eb5748897 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3892,7 +3892,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
* @hw: pointer to the HW structure
*
* ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
- * register, so the the bus width is hard coded.
+ * register, so the bus width is hard coded.
**/
static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
index 9f5457c9e627..bfaf4099c9a6 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
@@ -809,7 +809,7 @@ static s32 fm10k_mbx_read(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
* @hw: pointer to hardware structure
* @mbx: pointer to mailbox
*
- * This function copies the message from the the message array to mbmem
+ * This function copies the message from the message array to mbmem
**/
static void fm10k_mbx_write(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
{
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 0f69ef81751a..b8c3e7880e23 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2166,7 +2166,7 @@ out:
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 70cc4c5c0a01..c006a48e03cd 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -245,7 +245,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
struct pci_dev *pdev;
- /* determine whether to use the the parent device
+ /* determine whether to use the parent device
*/
if (ixgbe_pcie_from_parent(&adapter->hw))
pdev = adapter->pdev->bus->parent->self;
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index a4cdf2f8041a..59244c553c47 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2158,7 +2158,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
/*
* In PCI 33 mode, the P_PLL is not used, and therefore,
- * the the P_PLL_LOCK bit in the adapter_status register will
+ * the P_PLL_LOCK bit in the adapter_status register will
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 3b67d60d4378..b8da6e89059a 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -83,7 +83,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* returns: 0 on success, -ETIMEDOUT on a timeout
*
* Writes the value to the requested register by first writing the value
- * into MWD register. The the MCR register is then appropriately setup
+ * into MWD register. The MCR register is then appropriately setup
* to finish the write operation.
*/
static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 5a34e72bab9a..6113a29f01bc 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -250,14 +250,14 @@ struct i2400m_barker_db;
*
* @bus_setup: [optional fill] Function called by the bus-generic code
* [i2400m_setup()] to setup the basic bus-specific communications
- * to the the device needed to load firmware. See LIFE CYCLE above.
+ * to the device needed to load firmware. See LIFE CYCLE above.
*
* NOTE: Doesn't need to upload the firmware, as that is taken
* care of by the bus-generic code.
*
* @bus_release: [optional fill] Function called by the bus-generic
* code [i2400m_release()] to shutdown the basic bus-specific
- * communications to the the device needed to load firmware. See
+ * communications to the device needed to load firmware. See
* LIFE CYCLE above.
*
* This function does not need to reset the device, just tear down
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 0b602951ff6b..4466ee71d1e4 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -693,7 +693,7 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq,
* right spot where to insert the packet; we know the queue is
* not empty, so we are not the first ones; we also know we
* are not going to be the last ones. The list is sorted, so
- * we have to insert before the the first guy with an nsn_itr
+ * we have to insert before the first guy with an nsn_itr
* greater that our nsn. */
skb_queue_walk(&roq->queue, skb_itr) {
roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb;
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index f20886ade1cc..1f7b2b922fae 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -233,7 +233,7 @@
* i2400m_tx_skip_tail() Marks unusable FIFO tail space
* i2400m->bus_tx_kick()
*
- * Now i2400m->bus_tx_kick() is the the bus-specific driver backend
+ * Now i2400m->bus_tx_kick() is the bus-specific driver backend
* implementation; that would do:
*
* i2400m->bus_tx_kick()
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index e9cc7787bf5f..fab813d0d6cb 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -77,7 +77,7 @@ struct rx_attention {
* first_msdu is set.
*
* peer_idx_invalid
- * Indicates no matching entries within the the max search
+ * Indicates no matching entries within the max search
* count. Only set when first_msdu is set.
*
* peer_idx_timeout
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index dc6bd8cd9b83..e32154fe1732 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -98,7 +98,7 @@ struct bus_request {
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- * implemented using the asynchronous mode allowing the the bus
+ * implemented using the asynchronous mode allowing the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index eab0ab976af2..9963faaa465f 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1173,7 +1173,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
* Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
+ * response is available in the FIFO
*
* CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index fc08162b5820..68a96e3a0044 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -638,7 +638,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN,
AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT);
- /* on AR92xx, the highest bit of count will make the the chip send
+ /* on AR92xx, the highest bit of count will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 1ad66b76749b..c559e7576141 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1766,7 +1766,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
- /* on AR93xx and newer, count = 0 will make the the chip send
+ /* on AR93xx and newer, count = 0 will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index a1f1127d7808..24cce9db3ce0 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -1609,7 +1609,7 @@ struct wcn36xx_hal_config_bss_params {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -1746,7 +1746,7 @@ struct wcn36xx_hal_config_bss_params_v1 {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -3736,10 +3736,10 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
/* success or failure */
u32 status;
- /* Length of the responce message */
+ /* Length of the response message */
u32 rsp_length;
- /* FIXME: Currently considering the the responce will be less than
+ /* FIXME: Currently considering that the response will be less than
* 100bytes */
u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
} __packed;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index eb8584a9c49a..935f43619c8a 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3818,7 +3818,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
}
/*
- * Suspend the the MAC and update the slot timing
+ * Suspend the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index 81c4ea3c6958..be4f3ade1ae8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -191,7 +191,7 @@ enum iwl_tx_flags {
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
+ * @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @key: security key
* @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
@@ -554,7 +554,7 @@ struct iwl_extended_beacon_notif {
/**
* enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
+ * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
index 5b43616eeb06..939c05b8b854 100644
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
@@ -67,7 +67,7 @@
#include "fw-api.h"
#include "mvm.h"
-/* Maps the driver specific channel width definition to the the fw values */
+/* Maps the driver specific channel width definition to the fw values */
u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
{
switch (chandef->width) {
@@ -88,7 +88,7 @@ u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
/*
* Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
+ * freq) definitions to the fw values
*/
u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index 1fb329dc6744..8462076cf744 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -157,7 +157,7 @@ free_and_exit:
* This function is called when the 'fw_dump' file is opened for
* reading.
* This function dumps firmware memory in different files
- * (ex. DTCM, ITCM, SQRAM etc.) based on the the segments for
+ * (ex. DTCM, ITCM, SQRAM etc.) based on the segments for
* debugging.
*/
static ssize_t
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 8428858204a6..e1f05ad89d9e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -596,7 +596,7 @@ static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
* rsi_sdio_host_intf_read_pkt() - This function reads the packet
from the device.
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
* @length: Length of the data to be read from the device.
*
* Return: 0 on success, -1 on failure.
@@ -627,7 +627,7 @@ int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter,
* rsi_init_sdio_interface() - This function does init specific to SDIO.
*
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
*
* Return: 0 on success, -1 on failure.
*/
diff --git a/drivers/net/wireless/ti/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h
index 2bdec38699f4..bfe998947957 100644
--- a/drivers/net/wireless/ti/wl1251/acx.h
+++ b/drivers/net/wireless/ti/wl1251/acx.h
@@ -1243,7 +1243,7 @@ struct wl1251_acx_arp_filter {
u8 address[16]; /* The IP address used to filter ARP packets.
ARP packets that do not match this address are
dropped. When the IP Version is 4, the last 12
- bytes of the the address are ignored. */
+ bytes of the address are ignored. */
} __attribute__((packed));
struct wl1251_acx_ac_cfg {
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index bcb90e4888dd..c1dc11893cea 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -36,7 +36,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#define pr_fmt(fmt) "acpiphp_glue: " fmt
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
index 7dfef3ee5b53..40511e39cea5 100644
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ b/drivers/pcmcia/pxa2xx_hx4700.c
@@ -33,7 +33,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/*
* IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
* The asic3 default IRQ type is level trigger low level detect, exactly
- * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+ * the signal present on GPIOD4_CF_nCD when a CF card is inserted.
* If the IRQ type is not changed, the asic3 interrupt handler will loop
* repeatedly because it is unable to clear the level trigger interrupt.
*/
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index a6a22054c0ba..ff28b7bce456 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1265,7 +1265,7 @@ static int nmk_gpio_probe(struct platform_device *dev)
platform_set_drvdata(dev, nmk_chip);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index a4814066ea08..53a219d7d6ea 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1636,7 +1636,7 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 62653f50a524..6f0afdff9402 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -302,8 +302,9 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
ret = power_supply_show_property(dev, attr, prop_buf);
if (ret == -ENODEV || ret == -ENODATA) {
- /* When a battery is absent, we expect -ENODEV. Don't abort;
- send the uevent with at least the the PRESENT=0 property */
+ /* When a battery is absent, we expect -ENODEV.
+ * Don't abort; send the uevent with at least
+ * the PRESENT=0 property */
ret = 0;
continue;
}
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index 28871cd7e3b5..f224020e14d8 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -122,7 +122,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
- * configurations, so we use the the first method there, stripping off
+ * configurations, so we use the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 642c77c76b84..a458529e1c61 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3519,7 +3519,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 2035b0d64351..e62a7346428a 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1983,7 +1983,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
/*
* Device's PID has changed. We need to cleanup
* and re-login. If there is another device with
- * the the newly discovered pid, send an scn notice
+ * the newly discovered pid, send an scn notice
* so that its new pid can be discovered.
*/
list_for_each(qe, &rport->port->rport_q) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index ec193a8357d7..8dd83bca7d8f 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -511,7 +511,7 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
* @skb: The receive skb
* @netdev: The associated net device
* @ptype: The packet_type structure which was used to register this handler
- * @orig_dev: The original net_device the the skb was received on.
+ * @orig_dev: The original net_device that the skb was received on.
* (in case dev is a bond)
*
* Returns: 0 for success
@@ -2725,7 +2725,7 @@ module_exit(fcoe_exit);
* fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
* @seq: active sequence in the FLOGI or FDISC exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
@@ -2754,7 +2754,7 @@ done:
* fcoe_logo_resp() - FCoE specific LOGO response handler
* @seq: active sequence in the LOGO exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 34a1b1f333b4..65a53a9eb059 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -213,7 +213,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new)
* that doesn't have a priv (fcf was deleted). However,
* libfcoe will always delete FCFs before trying to add
* them. This is ensured because both recv_adv and
- * age_fcfs are protected by the the fcoe_ctlr's mutex.
+ * age_fcfs are protected by the fcoe_ctlr's mutex.
* This means that we should never get a FCF with a
* non-NULL priv pointer.
*/
@@ -694,7 +694,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
*
* The caller must check that the length is a multiple of 4.
* The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
- * The the skb must also be an fc_frame.
+ * The skb must also be an fc_frame.
*
* This is called from the lower-level driver with spinlocks held,
* so we must not take a mutex here.
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 22a9bb1abae1..025ec5c10978 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -244,7 +244,7 @@ enum sci_controller_states {
SCIC_INITIALIZED,
/**
- * This state indicates the the controller is in the process of becoming
+ * This state indicates that the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 47a013fffae7..07af745220eb 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete(
* permitted. This state is entered from the INITIAL state. This state
* is entered from the STOPPING state.
*
- * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * @SCI_DEV_STARTING: This state indicates that the remote device is in
* the process of becoming ready (i.e. starting). In this state no new
* IO operations are permitted. This state is entered from the STOPPED
* state.
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
index c7ee81d01125..f22950b12b8b 100644
--- a/drivers/scsi/isci/remote_node_context.h
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state {
/**
* struct sci_remote_node_context - This structure contains the data
* associated with the remote node context object. The remote node context
- * (RNC) object models the the remote device information necessary to manage
+ * (RNC) object models the remote device information necessary to manage
* the silicon RNC.
*/
struct sci_remote_node_context {
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 6dcaed0c1fc8..53f17367fd71 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -67,7 +67,7 @@
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
-* @ihost: host on which the the request was queued
+* @ihost: host on which the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 2f9b96826ac0..8a76261d8915 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1680,7 +1680,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -1713,7 +1713,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -1846,7 +1846,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -1878,7 +1878,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index c66088d0fd2a..5f3f42f3671a 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5815,7 +5815,7 @@ reject_out:
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful, the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 5452f1f4220e..69ff3f9fa92b 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2040,7 +2040,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so that the round robin selection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
@@ -5746,7 +5746,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
}
/* This routine decrements the reference count for a ndlp structure. If the
- * count goes to 0, this indicates the the associated nodelist should be
+ * count goes to 0, this indicates that the associated nodelist should be
* freed. Returning 1 indicates the ndlp resource has been released; on the
* other hand, returning 0 indicates the ndlp resource has not been released
* yet.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0b2c53af85c7..015cc6f07dff 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3917,7 +3917,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelevant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 06241f590c1e..f1666cdcb02c 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2265,7 +2265,7 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * that the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 207a43d952fa..94826050e89e 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -16743,7 +16743,7 @@ out:
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 96dcc097a463..bea660c7fba6 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3220,7 +3220,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when HBA driver received the identify done event or initiate FIS received
* event(for SATA), it will invoke this function to notify the sas layer that
- * the sas toplogy has formed, please discover the the whole sas domain,
+ * the sas toplogy has formed, please discover the whole sas domain,
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 54fb984a3e17..87d239240463 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -354,7 +354,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
{
/*
* On all 4xx PPC's the SPI bus is shared/multiplexed with
- * the 2nd I2C bus. We need to enable the the SPI bus before
+ * the 2nd I2C bus. We need to enable the SPI bus before
* using it.
*/
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index d401dbf4c7c6..6db362a23ca3 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -921,7 +921,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
int i;
struct ieee80211_rxb *rxb = NULL;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8723au/core/rtw_cmd.c b/drivers/staging/rtl8723au/core/rtw_cmd.c
index 2447a56df838..97d4e940f2b0 100644
--- a/drivers/staging/rtl8723au/core/rtw_cmd.c
+++ b/drivers/staging/rtl8723au/core/rtw_cmd.c
@@ -509,7 +509,7 @@ int rtw_joinbss_cmd23a(struct rtw_adapter *padapter,
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the
+ /* If the driver wants to use the bssid to create the
* connection. If not, we have to copy the connecting AP's
* MAC address to it so that the driver just has the bssid
* information for PMKIDList searching. */
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 75cbde1f7c5b..caa782ca2456 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -409,7 +409,7 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
} else {
/*
* Extract the RELATIVE TARGET PORT IDENTIFIER to identify
- * the Target Port in question for the the incoming
+ * the Target Port in question for the incoming
* SET_TARGET_PORT_GROUPS op.
*/
rtpi = get_unaligned_be16(ptr + 2);
diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h
index ba87d6e731dd..1a4ba247f160 100644
--- a/drivers/thunderbolt/ctl.h
+++ b/drivers/thunderbolt/ctl.h
@@ -44,7 +44,7 @@ struct tb_cfg_result {
* If err = 1 then this is the port that send the
* error.
* If err = 0 and if this was a cfg_read/write then
- * this is the the upstream port of the responding
+ * this is the upstream port of the responding
* switch.
* Otherwise the field is set to zero.
*/
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index a98833cbfcf3..4d0df064684f 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -314,8 +314,7 @@ static const int hrsl_to_error[] = {
/*
* See http://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a
- * reasonable overview of how control transfers use the the IN/OUT
- * tokens.
+ * reasonable overview of how control transfers use the IN/OUT tokens.
*/
#define MAX3421_HXFR_BULK_IN(ep) (0x00 | (ep)) /* bulk or interrupt */
#define MAX3421_HXFR_SETUP 0x10
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 73485fa4372f..bad2191fbd26 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1610,7 +1610,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
- * RExit to a disconnect state). If so, let the the driver know it's
+ * RExit to a disconnect state). If so, let the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED(temp) &&
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 01bf53392819..1b99a08ca2de 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -261,7 +261,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
* Cypress app note that describes this mechanism
- * states the the low-speed part can't handle more
+ * states that the low-speed part can't handle more
* than 800 bytes/sec, in which case 4800 baud is the
* safest speed for a part like that.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 4f70df33975a..fe5e40b8141a 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -429,7 +429,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
}
/*
- * This is the the common top part of all parallel port callback operations that
+ * This is the common top part of all parallel port callback operations that
* send synchronous messages to the device. This implements convoluted locking
* that avoids two scenarios: (1) a port operation is called after usbserial
* has called our release function, at which point struct mos7715_parport has
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 3f4f5fbded55..fe4447f3f2ea 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -46,7 +46,7 @@
*
* ASSUMPTIONS:
*
- * - We use the the as device address the port number where it is
+ * - We use as device address the port number where it is
* connected (port 0 doesn't exist). For unauth, it is 128 + that.
*
* ROADMAP:
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
index b7d4f6b75eef..caa4cb40334d 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/uwb/drp-ie.c
@@ -262,7 +262,7 @@ int uwb_drp_ie_update(struct uwb_rsv *rsv)
* We are given a zone id and the MAS bitmap of bits that need to be set in
* this zone. Note that this zone may already have bits set and this only
* adds settings - we cannot simply assign the MAS bitmap contents to the
- * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * zone contents. We iterate over the bits (MAS) in the zone and set the
* bits that are set in the given MAS bitmap.
*/
static
diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
index d4e7684e7045..501bc08dc125 100644
--- a/drivers/video/fbdev/omap/sossi.c
+++ b/drivers/video/fbdev/omap/sossi.c
@@ -370,7 +370,7 @@ static void sossi_set_bits_per_cycle(int bpc)
int bus_pick_count, bus_pick_width;
/*
- * We set explicitly the the bus_pick_count as well, although
+ * We set explicitly the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
diff --git a/drivers/video/fbdev/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c
index ceb434c95c0d..9177b8056356 100644
--- a/drivers/video/fbdev/sis/sis_accel.c
+++ b/drivers/video/fbdev/sis/sis_accel.c
@@ -215,7 +215,7 @@ SiS310SubsequentScreenToScreenCopy(struct sis_video_info *ivideo, int src_x, int
* and destination blitting areas overlap and
* adapt the bitmap addresses synchronously
* if the coordinates exceed the valid range.
- * The the areas do not overlap, we do our
+ * If the areas do not overlap, we do our
* normal check.
*/
if((mymax - mymin) < height) {
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index ac7d921ed984..b3179b482529 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -511,7 +511,7 @@ static int autofs_dev_ioctl_askumount(struct file *fp,
* located path is the root of a mount we return 1 along with
* the super magic of the mount or 0 otherwise.
*
- * In both cases the the device number (as returned by
+ * In both cases the device number (as returned by
* new_encode_dev()) is also returned.
*/
static int autofs_dev_ioctl_ismountpoint(struct file *fp,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index 5ec03d999c37..b7173d53ca8b 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -854,7 +854,7 @@ int btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace)
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
- * not called and the the filesystem is remounted
+ * not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancelation is wanted.
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index d6033f540cc7..141ab13a538c 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -3555,7 +3555,7 @@ verbose_printk("btrfs: process_recorded_refs %llu\n", sctx->cur_ino);
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
- * the the current inum. To handle this case, we create the
+ * than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index c5b8ba37f88e..8f22f791cff9 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2710,7 +2710,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
mutex_unlock(&log_root_tree->log_mutex);
/*
- * nobody else is going to jump in and write the the ctree
+ * nobody else is going to jump in and write the ctree
* super here because the log_commit atomic below is protecting
* us. We must be called with a transaction handle pinning
* the running transaction open, so a full commit can't hop
diff --git a/fs/dcache.c b/fs/dcache.c
index c71e3732e53b..215f9c5db3a3 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -2011,8 +2011,8 @@ EXPORT_SYMBOL(d_obtain_root);
* same inode, only the actual correct case is stored in the dcache for
* case-insensitive filesystems.
*
- * For a case-insensitive lookup match and if the the case-exact dentry
- * already exists in in the dcache, use it and return it.
+ * For a case-insensitive lookup match and if the case-exact dentry
+ * already exists in the dcache, use it and return it.
*
* If no entry exists with the exact case name, allocate new dentry with
* the exact case, and return the spliced entry.
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 6bd67e2011f0..70a39a6e0bc7 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -899,7 +899,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack {
* @filename: This function kmalloc's the memory for the filename
* @filename_size: This function sets this to the amount of memory
* kmalloc'd for the filename
- * @packet_size: This function sets this to the the number of octets
+ * @packet_size: This function sets this to the number of octets
* in the packet parsed
* @mount_crypt_stat: The mount-wide cryptographic context
* @data: The memory location containing the start of the tag 70
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index 678f9ab08c48..4d5173e2051a 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -51,7 +51,7 @@ struct ext2_block_alloc_info {
/*
* Was i_next_alloc_goal in ext2_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it is the physical block number of the block which was most-recently
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index 4b143febf21f..79a4f7bef77e 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -271,7 +271,7 @@ static int ext4_create_inline_data(handle_t *handle,
len = 0;
}
- /* Insert the the xttr entry. */
+ /* Insert the xttr entry. */
i.value = value;
i.value_len = len;
@@ -834,7 +834,7 @@ out:
/*
* Prepare the write for the inline data.
- * If the the data can be written into the inode, we just read
+ * If the data can be written into the inode, we just read
* the page and make it uptodate, and start the journal.
* Otherwise read the page, makes it dirty so that it can be
* handle in writepages(the i_disksize update is left to the
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index 7fd35111cf62..358511fa1285 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -158,7 +158,7 @@ struct seg_entry {
unsigned short valid_blocks; /* # of valid blocks */
unsigned char *cur_valid_map; /* validity bitmap of blocks */
/*
- * # of valid blocks and the validity bitmap stored in the the last
+ * # of valid blocks and the validity bitmap stored in the last
* checkpoint pack. This information is used by the SSR mode.
*/
unsigned short ckpt_valid_blocks;
diff --git a/fs/kernfs/file.c b/fs/kernfs/file.c
index 2bacb9988566..5a46b04f071a 100644
--- a/fs/kernfs/file.c
+++ b/fs/kernfs/file.c
@@ -264,7 +264,7 @@ static ssize_t kernfs_fop_read(struct file *file, char __user *user_buf,
* There is no easy way for us to know if userspace is only doing a partial
* write, so we don't support them. We expect the entire buffer to come on
* the first write. Hint: if you're writing a value, first read the file,
- * modify only the the value you're changing, then write entire buffer
+ * modify only the value you're changing, then write entire buffer
* back.
*/
static ssize_t kernfs_fop_write(struct file *file, const char __user *user_buf,
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 044013455621..c0aa12bdb106 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -690,7 +690,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb,
/*
* Under certain conditions, the window slide code
* might have reduced the number of bits available or
- * disabled the the local alloc entirely. Re-check
+ * disabled the local alloc entirely. Re-check
* here and return -ENOSPC if necessary.
*/
status = -ENOSPC;
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index b97359ba2648..e05c80d4705d 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -71,7 +71,7 @@ xfs_fs_encode_fh(
fileid_type = FILEID_INO32_GEN_PARENT;
/*
- * If the the filesystem may contain 64bit inode numbers, we need
+ * If the filesystem may contain 64bit inode numbers, we need
* to use larger file handles that can represent them.
*
* While we only allocate inodes that do not fit into 32 bits any
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index 26bb55e9e8b6..37cdb83e1e24 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -120,7 +120,7 @@ static inline int drm_rect_height(const struct drm_rect *r)
}
/**
- * drm_rect_visible - determine if the the rectangle is visible
+ * drm_rect_visible - determine if the rectangle is visible
* @r: rectangle whose visibility is returned
*
* RETURNS:
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index b9c7897dc566..c871164f6c89 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -2056,7 +2056,7 @@ enum ieee80211_tdls_actioncode {
*/
#define WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING BIT(2)
-/* TDLS capabilities in the the 4th byte of @WLAN_EID_EXT_CAPABILITY */
+/* TDLS capabilities in the 4th byte of @WLAN_EID_EXT_CAPABILITY */
#define WLAN_EXT_CAPA4_TDLS_BUFFER_STA BIT(4)
#define WLAN_EXT_CAPA4_TDLS_PEER_PSM BIT(5)
#define WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH BIT(6)
diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h
index d5b5f76d57ef..91c32b80c6d1 100644
--- a/include/linux/mic_bus.h
+++ b/include/linux/mic_bus.h
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ include/linux/virtio.h.
*/
#ifndef _MIC_BUS_H_
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 47a93928b90f..9d0916bf5320 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -213,7 +213,7 @@ extern pgprot_t protection_map[16];
#define FAULT_FLAG_USER 0x40 /* The fault originated in userspace */
/*
- * vm_fault is filled by the the pagefault handler and passed to the vma's
+ * vm_fault is filled by the pagefault handler and passed to the vma's
* ->fault function. The vma's ->fault is responsible for returning a bitmask
* of VM_FAULT_xxx flags that give details about how the fault was handled.
*
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 1c9effa25e26..85a8edc122bf 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -106,7 +106,7 @@ struct kparam_array
* ".") the kernel commandline parameter. Note that - is changed to _, so
* the user can use "foo-bar=1" even for variable "foo_bar".
*
- * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * @perm is 0 if the variable is not to appear in sysfs, or 0444
* for world-readable, 0644 for root-writable, etc. Note that if it
* is writable, you may need to use kparam_block_sysfs_write() around
* accesses (esp. charp, which can be kfreed when it changes).
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index f54d6659713a..c7b908411527 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2862,7 +2862,7 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
* must call this function to return the skb back to the stack, with
* or without a timestamp.
*
- * @skb: clone of the the original outgoing packet
+ * @skb: clone of the original outgoing packet
* @hwtstamps: hardware time stamps, may be NULL if not available
*
*/
diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h
index 94e5ed64dc6d..e9a8d524ab06 100644
--- a/include/net/caif/caif_layer.h
+++ b/include/net/caif/caif_layer.h
@@ -184,7 +184,7 @@ struct cflayer {
* CAIF packet downwards in the stack.
* Packet handling rules:
* - The CAIF packet (cfpkt) ownership is passed to the
- * transmit function. This means that the the packet
+ * transmit function. This means that the packet
* cannot be accessed after passing it to the below
* layer using dn->transmit().
*
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 20e80fa7bbdd..a99fdfcc894d 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -105,7 +105,7 @@ struct rt6_info {
struct in6_addr rt6i_gateway;
/* Multipath routes:
- * siblings is a list of rt6_info that have the the same metric/weight,
+ * siblings is a list of rt6_info that have the same metric/weight,
* destination, but not the same gateway. nsiblings is just a cache
* to speed up lookup.
*/
diff --git a/include/net/wimax.h b/include/net/wimax.h
index c52b68577cb0..c9705a3eb3b7 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -43,7 +43,7 @@
*
* USAGE
*
- * Embed a `struct wimax_dev` at the beginning of the the device's
+ * Embed a `struct wimax_dev` at the beginning of the device's
* private structure, initialize and register it. For details, see
* `struct wimax_dev`s documentation.
*
diff --git a/include/uapi/asm-generic/fcntl.h b/include/uapi/asm-generic/fcntl.h
index e063effe0cc1..04616a36f82a 100644
--- a/include/uapi/asm-generic/fcntl.h
+++ b/include/uapi/asm-generic/fcntl.h
@@ -142,7 +142,7 @@
* record locks, but are "owned" by the open file description, not the
* process. This means that they are inherited across fork() like BSD (flock)
* locks, and they are only released automatically when the last reference to
- * the the open file against which they were acquired is put.
+ * the open file against which they were acquired is put.
*/
#define F_OFD_GETLK 36
#define F_OFD_SETLK 37
diff --git a/include/uapi/linux/android/binder.h b/include/uapi/linux/android/binder.h
index 41420e341e75..92d7f52ddb10 100644
--- a/include/uapi/linux/android/binder.h
+++ b/include/uapi/linux/android/binder.h
@@ -266,7 +266,7 @@ enum binder_driver_return_protocol {
BR_FAILED_REPLY = _IO('r', 17),
/*
- * The the last transaction (either a bcTRANSACTION or
+ * The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
};
diff --git a/init/Kconfig b/init/Kconfig
index f5dbc6d4261b..70c23e6f1ea4 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -861,8 +861,8 @@ config LOG_CPU_MAX_BUF_SHIFT
used as it forces an exact (power of two) size of the ring buffer.
The number of possible CPUs is used for this computation ignoring
- hotplugging making the compuation optimal for the the worst case
- scenerio while allowing a simple algorithm to be used from bootup.
+ hotplugging making the computation optimal for the worst case
+ scenario while allowing a simple algorithm to be used from bootup.
Examples shift values and their meaning:
17 => 128 KB for each CPU
diff --git a/init/main.c b/init/main.c
index 6f0f1c5ff8cc..a0bb4ac95592 100644
--- a/init/main.c
+++ b/init/main.c
@@ -501,7 +501,7 @@ asmlinkage __visible void __init start_kernel(void)
debug_objects_early_init();
/*
- * Set up the the initial canary ASAP:
+ * Set up the initial canary ASAP:
*/
boot_init_stack_canary();
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 9019f15deab2..6e82ca9e2735 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -17,7 +17,7 @@
#ifdef HAVE_JUMP_LABEL
-/* mutex to protect coming/going of the the jump_label table */
+/* mutex to protect coming/going of the jump_label table */
static DEFINE_MUTEX(jump_label_mutex);
void jump_label_lock(void)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index bb0635bd74f2..2a1ea3c18eca 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2897,7 +2897,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
- * with as many of the the *youngest* kmsg records that fit into it.
+ * with as many of the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
diff --git a/kernel/smp.c b/kernel/smp.c
index f38a1e692259..2a2865ab3ec6 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -623,7 +623,7 @@ EXPORT_SYMBOL(on_each_cpu_mask);
* for all the required CPUs to finish. This may include the local
* processor.
* @cond_func: A callback function that is passed a cpu id and
- * the the info parameter. The function is called
+ * the info parameter. The function is called
* with preemption disabled. The function should
* return a blooean value indicating whether to IPI
* the specified CPU.
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 5040d44fe5a3..a96cf7a91325 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2933,7 +2933,7 @@ rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
* This function lets the user discard an event in the ring buffer
* and then that event will not be read later.
*
- * This function only works if it is called before the the item has been
+ * This function only works if it is called before the item has been
* committed. It will try to free the event from the ring buffer
* if another event has not been added behind it.
*
diff --git a/lib/dynamic_queue_limits.c b/lib/dynamic_queue_limits.c
index f346715e2255..3b9f82164f7d 100644
--- a/lib/dynamic_queue_limits.c
+++ b/lib/dynamic_queue_limits.c
@@ -60,7 +60,7 @@ void dql_completed(struct dql *dql, unsigned int count)
* the whole interval (the check above).
*
* If there is slack, the amount of execess data queued above
- * the the amount needed to prevent starvation, the queue limit
+ * the amount needed to prevent starvation, the queue limit
* can be decreased. To avoid hysteresis we consider the
* minimum amount of slack found over several iterations of the
* completion routine.
diff --git a/lib/earlycpio.c b/lib/earlycpio.c
index 3eb3e4722b8e..9d4da0a6a6ed 100644
--- a/lib/earlycpio.c
+++ b/lib/earlycpio.c
@@ -50,7 +50,7 @@ enum cpio_fields {
/**
* cpio_data find_cpio_data - Search for files in an uncompressed cpio
* @path: The directory to search for, including a slash at the end
- * @data: Pointer to the the cpio archive or a header inside
+ * @data: Pointer to the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @nextoff: When a matching file is found, this is the offset from the
* beginning of the cpio to the beginning of the next file, not the
diff --git a/lib/syscall.c b/lib/syscall.c
index e30e03932480..624d80430969 100644
--- a/lib/syscall.c
+++ b/lib/syscall.c
@@ -31,7 +31,7 @@ static int collect_syscall(struct task_struct *target, long *callno,
* @pc: filled with user PC
*
* If @target is blocked in a system call, returns zero with *@callno
- * set to the the call's number and @args filled in with its arguments.
+ * set to the call's number and @args filled in with its arguments.
* Registers not used for system call arguments may not be available and
* it is not kosher to use &struct user_regset calls while the system
* call is still in progress. Note we may get this result if @target
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index c41b2a0ee273..7fcd19c43c05 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1310,7 +1310,7 @@ static void return_unused_surplus_pages(struct hstate *h,
* evenly across all nodes with memory. Iterate across these nodes
* until we can no longer free unreserved surplus pages. This occurs
* when the nodes with surplus pages have no free pages.
- * free_pool_huge_page() will balance the the freed pages across the
+ * free_pool_huge_page() will balance the freed pages across the
* on-line nodes with memory and will handle the hstate accounting.
*/
while (nr_pages--) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 40e29429e7b0..a2a5857ef502 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4251,7 +4251,7 @@ static int zone_batchsize(struct zone *zone)
* locking.
*
* Any new users of pcp->batch and pcp->high should ensure they can cope with
- * those fields changing asynchronously (acording the the above rule).
+ * those fields changing asynchronously (according to the above rule).
*
* mutex_is_locked(&pcp_batch_high_lock) required when calling this function
* outside of boot time (or some other assurance that no concurrent updaters
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index c9b8fa544785..2658d6089f70 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -981,7 +981,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
return 0;
}
-/* Encrypt the the link */
+/* Encrypt the link */
static void hci_conn_encrypt(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 3322d3f4c85a..ed06d9b4fac0 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -835,7 +835,7 @@ static void hci_init4_req(struct hci_request *req, unsigned long opt)
* Delete Stored Link Key command. They are clearly indicating its
* absence in the bit mask of supported commands.
*
- * Check the supported commands and only if the the command is marked
+ * Check the supported commands and only if the command is marked
* as supported send it. If not supported assume that the controller
* does not have actual support for stored link keys which makes this
* command redundant anyway.
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 238f38d21641..6cd9ec0eed47 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -146,7 +146,7 @@ int eth_rebuild_header(struct sk_buff *skb)
EXPORT_SYMBOL(eth_rebuild_header);
/**
- * eth_get_headlen - determine the the length of header for an ethernet frame
+ * eth_get_headlen - determine the length of header for an ethernet frame
* @data: pointer to start of frame
* @len: total length of frame
*
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 197c3f59ecbf..545f842eb4ab 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1347,7 +1347,7 @@ static void sctp_select_active_and_retran_path(struct sctp_association *asoc)
}
/* We did not find anything useful for a possible retransmission
- * path; either primary path that we found is the the same as
+ * path; either primary path that we found is the same as
* the current one, or we didn't generally find an active one.
*/
if (trans_sec == NULL)
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index a3380917f197..a31060a7f3cc 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -200,7 +200,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3;
max = asoc->frag_point;
- /* If the the peer requested that we authenticate DATA chunks
+ /* If the peer requested that we authenticate DATA chunks
* we need to account for bundling of the AUTH chunks along with
* DATA.
*/
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 41248b1820c7..507ee9d91bd1 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -190,7 +190,7 @@ void rpc_destroy_generic_auth(void)
}
/*
- * Test the the current time (now) against the underlying credential key expiry
+ * Test the current time (now) against the underlying credential key expiry
* minus a timeout and setup notification.
*
* The normal case:
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 7d730543f243..53d5e7a8753b 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
* @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
* %WIMAX_RF_OFF radio off.
*
- * Reports changes in the software RF switch state to the the WiMAX
+ * Reports changes in the software RF switch state to the WiMAX
* stack.
*
* The main use is during initialization, so the driver can query the
diff --git a/scripts/coccinelle/misc/badty.cocci b/scripts/coccinelle/misc/badty.cocci
index 2fc06fc71927..7bde383f577b 100644
--- a/scripts/coccinelle/misc/badty.cocci
+++ b/scripts/coccinelle/misc/badty.cocci
@@ -3,7 +3,7 @@
//# This makes an effort to find cases where the argument to sizeof is wrong
//# in memory allocation functions by checking the type of the allocated memory
//# when it is a double pointer and ensuring the sizeof argument takes a pointer
-//# to the the memory being allocated. There are false positives in cases the
+//# to the memory being allocated. There are false positives in cases the
//# sizeof argument is not used in constructing the return value. The result
//# may need some reformatting.
//
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index db40fa04cd51..9eb8c74b69a1 100755
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in
kernel/trace/trace_functions.c
The resulted trace is processed into a tree to produce a more human
view of the call stack by drawing textual but hierarchical tree of
-calls. Only the functions's names and the the call time are provided.
+calls. Only the functions's names and the call time are provided.
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
index 3064c6ced87c..7b9769e7985a 100644
--- a/security/apparmor/context.c
+++ b/security/apparmor/context.c
@@ -13,7 +13,7 @@
* License.
*
*
- * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * AppArmor sets confinement on every task, via the aa_task_cxt and
* the aa_task_cxt.profile, both of which are required and are not allowed
* to be NULL. The aa_task_cxt is not reference counted and is unique
* to each cred (which is reference count). The profile pointed to by
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 4743d71e4aa6..5d2686fba107 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -478,7 +478,7 @@ error:
* keyring, otherwise replace the link to the matching key with a link to the
* new key.
*
- * The key must grant the caller Link permission and the the keyring must grant
+ * The key must grant the caller Link permission and the keyring must grant
* the caller Write permission. Furthermore, if an additional link is created,
* the keyring's quota will be extended.
*
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 2fe86d2e1b09..28078d7004da 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -5158,7 +5158,7 @@ EXPORT_SYMBOL_GPL(snd_hda_power_save);
* @nid: NID to check / update
*
* Check whether the given NID is in the amp list. If it's in the list,
- * check the current AMP status, and update the the power-status according
+ * check the current AMP status, and update the power-status according
* to the mute status.
*
* This function is supposed to be set or called from the check_power_status
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 87eff3173ce9..5dbd4c73c862 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -857,7 +857,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec,
static struct snd_kcontrol_new beep_vol_ctl =
HDA_CODEC_VOLUME(NULL, 0, 0, 0);
- /* check for mute support for the the amp */
+ /* check for mute support for the amp */
if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
const struct snd_kcontrol_new *temp;
if (spec->anabeep_nid == nid)
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index 3919aed39ca0..5e52086d7b98 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -31,7 +31,7 @@
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
- * sampling rate. That means the the FPGA doubles the
+ * sampling rate. That means that the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index 79552953e1bd..ec5624bf1e13 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -725,7 +725,7 @@ static void pll_factors(struct snd_soc_codec *codec,
u64 Kpart;
unsigned int K, Ndiv, Nmod, target;
- /* The the PLL output is always 98.304MHz. */
+ /* The PLL output is always 98.304MHz. */
target = 98304000;
/* If the input frequency is over 14.4MHz then scale it down. */
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index 93d7e56c6066..37100b38b377 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -157,7 +157,7 @@ static void fsl_dma_abort_stream(struct snd_pcm_substream *substream)
/**
* fsl_dma_update_pointers - update LD pointers to point to the next period
*
- * As each period is completed, this function changes the the link
+ * As each period is completed, this function changes the link
* descriptor pointers for that period to point to the next period.
*/
static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private)
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index 0190cb6332f2..635b5cc6b56d 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -615,7 +615,7 @@ A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. The DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index e463caa3eb49..501d00446568 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -196,7 +196,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
- period being the hist entry period value
- - WEIGHT-A/WEIGHT-B being user supplied weights in the the '-c' option
+ - WEIGHT-A/WEIGHT-B being user supplied weights in the '-c' option
behind ':' separator like '-c wdiff:1,2'.
- WEIGHT-A being the weight of the data file
- WEIGHT-B being the weight of the baseline data file
diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
index fd7e9e9d6f4a..1aa7faa0e0e0 100644
--- a/tools/thermal/tmon/pid.c
+++ b/tools/thermal/tmon/pid.c
@@ -38,7 +38,7 @@
/**************************************************************************
* PID (Proportional-Integral-Derivative) controller is commonly used in
- * linear control system, consider the the process.
+ * linear control system, consider the process.
* G(s) = U(s)/E(s)
* kp = proportional gain
* ki = integral gain
--
2.1.0
^ permalink raw reply related [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2015-03-27 1:55 ` Michael Opdenacker
@ 2015-03-27 2:16 ` Michael Opdenacker
2015-03-27 9:34 ` Jiri Kosina
2015-03-27 2:23 ` Joe Perches
1 sibling, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2015-03-27 2:16 UTC (permalink / raw)
To: edubezval, rdunlap, joe, akpm, arend, gregkh, torvalds
Cc: linux-kernel, Jiri Kosina
On 03/26/2015 06:55 PM, Michael Opdenacker wrote:
> 222 files changed, 493 insertions(+), 258 deletions(-)
Is this patch getting too big (and getting bigger and bigger) to be ever
merged?
Unless you tell me otherwise, I'm thinking about splitting it into
several patches, one for each subsystem. That would unnecessarily
increase the number of commits for the same thing, what else can we do?
Michael.
--
Michael Opdenacker, CEO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
+33 484 258 098
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2015-03-27 1:55 ` Michael Opdenacker
2015-03-27 2:16 ` Michael Opdenacker
@ 2015-03-27 2:23 ` Joe Perches
2015-03-27 2:52 ` Michael Opdenacker
1 sibling, 1 reply; 35+ messages in thread
From: Joe Perches @ 2015-03-27 2:23 UTC (permalink / raw)
To: Michael Opdenacker
Cc: edubezval, rdunlap, akpm, arend, gregkh, torvalds, linux-kernel
On Thu, 2015-03-26 at 18:55 -0700, Michael Opdenacker wrote:
> Fix all occurrences of "the the ", and occasionally "in in ",
> in the source code, comments and documentation.
[]
> arch/powerpc/mm/gup.c | 235 +++++++++++++++++++++
I think that one snuck in unintentionally.
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2015-03-27 2:23 ` Joe Perches
@ 2015-03-27 2:52 ` Michael Opdenacker
2015-03-27 2:55 ` Michael Opdenacker
0 siblings, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2015-03-27 2:52 UTC (permalink / raw)
To: Joe Perches
Cc: edubezval, rdunlap, akpm, arend, gregkh, torvalds, linux-kernel
On 03/26/2015 07:23 PM, Joe Perches wrote:
> On Thu, 2015-03-26 at 18:55 -0700, Michael Opdenacker wrote:
>> Fix all occurrences of "the the ", and occasionally "in in ",
>> in the source code, comments and documentation.
> []
>
>> arch/powerpc/mm/gup.c | 235 +++++++++++++++++++++
> I think that one snuck in unintentionally.
Oops, I should look better next time. This one was quite obvious.
Many thanks!
Michael.
--
Michael Opdenacker, CEO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
+33 484 258 098
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2015-03-27 2:52 ` Michael Opdenacker
@ 2015-03-27 2:55 ` Michael Opdenacker
0 siblings, 0 replies; 35+ messages in thread
From: Michael Opdenacker @ 2015-03-27 2:55 UTC (permalink / raw)
To: trivial, edubezval, rdunlap, joe, akpm, arend, gregkh, torvalds
Cc: linux-kernel, Michael Opdenacker
Fix all occurrences of "the the ", and occasionally "in in ",
in the source code, comments and documentation.
The replacement couldn't be automated because sometimes
the first "the" was meant to be another word.
Example: "according the the"
meaning: "according to the"
Note that I sometimes took the opportunity to fix
other spelling issues or typos in the same sentences,
and to reformat some comments impacted by the changes.
I also fixed a few checkpatch errors in the same
lines, but not all of them (should be addressed by
separate patches).
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Reviewed-by: rdunlap@infradead.org
Acked-by: Eduardo Valentin <edubezval@gmail.com>
---
Documentation/ABI/testing/sysfs-class-cxl | 4 ++--
Documentation/ABI/testing/sysfs-devices-memory | 2 +-
Documentation/DocBook/crypto-API.tmpl | 2 +-
Documentation/DocBook/media/v4l/controls.xml | 2 +-
Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
Documentation/devicetree/bindings/arm/arm-boards | 2 +-
.../devicetree/bindings/power/rockchip-io-domain.txt | 2 +-
Documentation/filesystems/autofs4-mount-control.txt | 4 ++--
Documentation/filesystems/overlayfs.txt | 2 +-
Documentation/phy.txt | 2 +-
Documentation/vm/unevictable-lru.txt | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/unwind.h | 2 +-
arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
arch/arm/mach-pxa/stargate2.c | 2 +-
arch/arm64/crypto/aes-neon.S | 2 +-
arch/blackfin/mach-common/entry.S | 2 +-
arch/c6x/platforms/cache.c | 2 +-
arch/ia64/include/asm/spinlock.h | 2 +-
arch/ia64/include/asm/uv/uv_hub.h | 2 +-
arch/m68k/coldfire/intc-2.c | 2 +-
arch/metag/kernel/process.c | 2 +-
arch/microblaze/kernel/entry.S | 2 +-
arch/mips/alchemy/devboards/pm.c | 2 +-
arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
arch/mips/include/asm/spinlock.h | 2 +-
arch/mips/kvm/mips.c | 2 +-
arch/mips/mm/c-octeon.c | 4 ++--
arch/mips/netlogic/xlr/fmn.c | 2 +-
arch/powerpc/include/asm/cache.h | 2 +-
arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
arch/powerpc/kernel/head_64.S | 2 +-
arch/powerpc/mm/hugetlbpage.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/platforms/chrp/setup.c | 2 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
arch/powerpc/xmon/xmon.c | 2 +-
arch/s390/kernel/perf_cpum_sf.c | 2 +-
arch/s390/mm/gup.c | 2 +-
arch/sparc/kernel/pci.c | 2 +-
arch/sparc/mm/gup.c | 2 +-
arch/tile/include/asm/irqflags.h | 2 +-
arch/tile/include/gxio/trio.h | 2 +-
arch/tile/kernel/single_step.c | 2 +-
arch/x86/include/asm/spinlock.h | 2 +-
arch/x86/include/asm/uv/uv_hub.h | 2 +-
arch/x86/kernel/entry_64.S | 2 +-
arch/x86/kvm/x86.c | 2 +-
arch/x86/mm/gup.c | 4 ++--
arch/x86/platform/efi/efi_thunk_64.S | 2 +-
arch/x86/xen/setup.c | 2 +-
arch/xtensa/include/asm/initialize_mmu.h | 2 +-
arch/xtensa/kernel/entry.S | 12 ++++++------
crypto/asymmetric_keys/pkcs7_parser.h | 2 +-
drivers/acpi/acpica/accommon.h | 2 +-
drivers/acpi/acpica/tbfadt.c | 2 +-
drivers/char/apm-emulation.c | 2 +-
drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
drivers/cpuidle/driver.c | 2 +-
drivers/crypto/picoxcell_crypto.c | 2 +-
drivers/crypto/ux500/hash/hash_core.c | 2 +-
drivers/firmware/efi/runtime-wrappers.c | 2 +-
drivers/gpio/gpio-ich.c | 2 +-
drivers/gpio/gpio-sch.c | 2 +-
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h | 2 +-
drivers/gpu/drm/drm_crtc.c | 2 +-
drivers/gpu/drm/drm_mm.c | 4 ++--
drivers/gpu/drm/i915/i915_gem.c | 2 +-
drivers/gpu/drm/i915/i915_gem_userptr.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 4 ++--
drivers/gpu/drm/radeon/atombios.h | 4 ++--
drivers/gpu/drm/radeon/r300_reg.h | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 2 +-
drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
drivers/gpu/drm/radeon/radeon_vm.c | 4 ++--
drivers/hv/channel.c | 4 ++--
drivers/hv/vmbus_drv.c | 4 ++--
drivers/hwmon/pmbus/ucd9200.c | 2 +-
drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
drivers/infiniband/hw/qib/qib.h | 2 +-
drivers/input/mouse/gpio_mouse.c | 2 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
drivers/lguest/core.c | 2 +-
drivers/media/dvb-frontends/tda1002x.h | 2 +-
drivers/media/dvb-frontends/tda10048.c | 2 +-
drivers/media/pci/cx88/cx88-dsp.c | 2 +-
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/saa7164/saa7164-core.c | 2 +-
drivers/media/platform/davinci/vpbe.c | 2 +-
drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
drivers/media/usb/dvb-usb/friio.c | 2 +-
drivers/media/usb/dvb-usb/friio.h | 2 +-
drivers/media/usb/gspca/finepix.c | 2 +-
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 2 +-
drivers/memory/emif.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/mfd/db8500-prcmu.c | 2 +-
drivers/misc/mic/bus/mic_bus.c | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/ubi/ubi.h | 4 ++--
drivers/mtd/ubi/wl.c | 2 +-
drivers/net/can/xilinx_can.c | 2 +-
drivers/net/ethernet/agere/et131x.c | 2 +-
drivers/net/ethernet/calxeda/xgmac.c | 2 +-
drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
drivers/net/ethernet/intel/fm10k/fm10k_mbx.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
drivers/net/wimax/i2400m/i2400m.h | 4 ++--
drivers/net/wimax/i2400m/rx.c | 2 +-
drivers/net/wimax/i2400m/tx.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/wcn36xx/hal.h | 8 ++++----
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++--
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 4 ++--
drivers/net/wireless/mwifiex/debugfs.c | 2 +-
drivers/net/wireless/rsi/rsi_91x_sdio.c | 4 ++--
drivers/net/wireless/ti/wl1251/acx.h | 2 +-
drivers/pci/hotplug/acpiphp_glue.c | 2 +-
drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 2 +-
drivers/pinctrl/pinctrl-at91.c | 2 +-
drivers/power/power_supply_sysfs.c | 5 +++--
drivers/rtc/rtc-rs5c372.c | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 6 +++---
drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++--
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/remote_device.h | 2 +-
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/spi/spi-ppc4xx.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/rtl8723au/core/rtw_cmd.c | 2 +-
drivers/target/target_core_alua.c | 2 +-
drivers/thunderbolt/ctl.h | 2 +-
drivers/usb/host/max3421-hcd.c | 3 +--
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/mos7720.c | 2 +-
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/uwb/drp-ie.c | 2 +-
drivers/video/fbdev/omap/sossi.c | 2 +-
drivers/video/fbdev/sis/sis_accel.c | 2 +-
fs/autofs4/dev-ioctl.c | 2 +-
fs/btrfs/dev-replace.c | 2 +-
fs/btrfs/send.c | 2 +-
fs/btrfs/tree-log.c | 2 +-
fs/dcache.c | 4 ++--
fs/ecryptfs/keystore.c | 2 +-
fs/ext2/ext2.h | 2 +-
fs/ext4/inline.c | 4 ++--
fs/f2fs/segment.h | 2 +-
fs/kernfs/file.c | 2 +-
fs/ocfs2/localalloc.c | 2 +-
fs/xfs/xfs_export.c | 2 +-
include/drm/drm_rect.h | 2 +-
include/linux/ieee80211.h | 2 +-
include/linux/mic_bus.h | 2 +-
include/linux/mm.h | 2 +-
include/linux/moduleparam.h | 2 +-
include/linux/skbuff.h | 2 +-
include/net/caif/caif_layer.h | 2 +-
include/net/ip6_fib.h | 2 +-
include/net/wimax.h | 2 +-
include/uapi/asm-generic/fcntl.h | 2 +-
include/uapi/linux/android/binder.h | 2 +-
init/Kconfig | 4 ++--
init/main.c | 2 +-
kernel/jump_label.c | 2 +-
kernel/printk/printk.c | 2 +-
kernel/smp.c | 2 +-
kernel/trace/ring_buffer.c | 2 +-
lib/dynamic_queue_limits.c | 2 +-
lib/earlycpio.c | 2 +-
lib/syscall.c | 2 +-
mm/hugetlb.c | 2 +-
mm/page_alloc.c | 2 +-
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/hci_core.c | 2 +-
net/ethernet/eth.c | 2 +-
net/sctp/associola.c | 2 +-
net/sctp/chunk.c | 2 +-
net/sunrpc/auth_generic.c | 2 +-
net/wimax/op-rfkill.c | 2 +-
scripts/coccinelle/misc/badty.cocci | 2 +-
scripts/tracing/draw_functrace.py | 2 +-
security/apparmor/context.c | 2 +-
security/keys/keyctl.c | 2 +-
sound/pci/hda/hda_codec.c | 2 +-
sound/pci/hda/patch_sigmatel.c | 2 +-
sound/pci/ice1712/prodigy192.c | 2 +-
sound/soc/codecs/wm9713.c | 2 +-
sound/soc/fsl/fsl_dma.c | 2 +-
sound/sparc/dbri.c | 2 +-
tools/perf/Documentation/perf-diff.txt | 2 +-
tools/thermal/tmon/pid.c | 2 +-
221 files changed, 258 insertions(+), 258 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index 3680364b4048..4838a5751eeb 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -77,8 +77,8 @@ What: /sys/class/cxl/<afu>/api_version_compatible
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
- Decimal value of the the lowest version of the userspace API
- this this kernel supports.
+ Decimal value of the lowest version of the userspace API
+ this kernel supports.
AFU configuration records (eg. /sys/class/cxl/afu0.0/cr0):
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index deef3b5723cf..9767745b99bd 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -45,7 +45,7 @@ Description:
The file /sys/devices/system/memory/memoryX/state
is read-write. When read, its contents show the
online/offline state of the memory section. When written,
- root can toggle the the online/offline state of a removable
+ root can toggle the online/offline state of a removable
memory section (see removable file description above)
using the following commands.
# echo online > /sys/devices/system/memory/memoryX/state
diff --git a/Documentation/DocBook/crypto-API.tmpl b/Documentation/DocBook/crypto-API.tmpl
index 04a8c24ead47..818c3c813223 100644
--- a/Documentation/DocBook/crypto-API.tmpl
+++ b/Documentation/DocBook/crypto-API.tmpl
@@ -443,7 +443,7 @@
The type flag specifies the type of the cipher algorithm.
The caller usually provides a 0 when the caller wants the
default handling. Otherwise, the caller may provide the
- following selections which match the the aforementioned
+ following selections which match the aforementioned
cipher types:
</para>
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 4e9462f1ab4c..b018892f56da 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3414,7 +3414,7 @@ giving priority to the center of the metered area.</entry>
<row>
<entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant> </entry>
<entry>A multi-zone metering. The light intensity is measured
-in several points of the frame and the the results are combined. The
+in several points of the frame and the results are combined. The
algorithm of the zones selection and their significance in calculating the
final value is device dependent.</entry>
</row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
index f4e28e7d4751..721728745407 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
@@ -267,7 +267,7 @@ is intended for still imaging applications. The idea is to get the
best possible image quality that the hardware can deliver. It is not
defined how the driver writer may achieve that; it will depend on the
hardware and the ingenuity of the driver writer. High quality mode is
-a different mode from the the regular motion video capture modes. In
+a different mode from the regular motion video capture modes. In
high quality mode:<itemizedlist>
<listitem>
<para>The driver may be able to capture higher
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index b78564b2b201..3c473ec1c885 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -113,7 +113,7 @@ Required properties (in root node):
Required nodes:
- soc: some node of the RealView platforms must be the SoC
- node that contain the SoC-specific devices, withe the compatible
+ node that contain the SoC-specific devices, with the compatible
string set to one of these tuples:
"arm,realview-eb-soc", "simple-bus"
"arm,realview-pb1176-soc", "simple-bus"
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
index 8b70db103ca7..4679bde972c6 100644
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
@@ -37,7 +37,7 @@ Required properties:
You specify supplies using the standard regulator bindings by including
-a phandle the relevant regulator. All specified supplies must be able
+a phandle to the relevant regulator. All specified supplies must be able
to report their voltage. The IO Voltage Domain for any non-specified
supplies will be not be touched.
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index aff22113a986..e54896427b4a 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -373,7 +373,7 @@ variation uses the path and optionally arg1 set to an autofs mount type.
The call returns 1 if this is a mount point and sets arg1 to the device
number of the mount and field arg2 to the relevant super block magic
number (described below) or 0 if it isn't a mountpoint. In both cases
-the the device number (as returned by new_encode_dev()) is returned
+the device number (as returned by new_encode_dev()) is returned
in field arg1.
If supplied with a file descriptor we're looking for a specific mount,
@@ -387,7 +387,7 @@ is one or 0 if it isn't a mountpoint.
If a path is supplied (and the ioctlfd field is set to -1) then the path
is looked up and is checked to see if it is the root of a mount. If a
type is also given we are looking for a particular autofs mount and if
-a match isn't found a fail is returned. If the the located path is the
+a match isn't found a fail is returned. If the located path is the
root of a mount 1 is returned along with the super magic of the mount
or 0 otherwise.
diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.txt
index 6db0e5d1da07..570ab727b379 100644
--- a/Documentation/filesystems/overlayfs.txt
+++ b/Documentation/filesystems/overlayfs.txt
@@ -162,7 +162,7 @@ rename or unlink will of course be noticed and handled).
Multiple lower layers
---------------------
-Multiple lower layers can now be given using the the colon (":") as a
+Multiple lower layers can now be given using the colon (":") as a
separator character between the directory names. For example:
mount -t overlay overlay -olowerdir=/lower1:/lower2:/lower3 /merged
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index 371361c69a4b..6bce2443f9fc 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -83,7 +83,7 @@ should contain the phy name as given in the dt data and in the case of
non-dt boot, it should contain the label of the PHY. The two
devm_phy_get associates the device with the PHY using devres on
successful PHY get. On driver detach, release function is invoked on
-the the devres data and devres data is freed. phy_optional_get and
+the devres data and devres data is freed. phy_optional_get and
devm_phy_optional_get should be used when the phy is optional. These
two functions will never return -ENODEV, but instead returns NULL when
the phy cannot be found.
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index 744f82f86c58..441dd2266531 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -453,7 +453,7 @@ putback_lru_page() function to add migrated pages back to the LRU.
mmap(MAP_LOCKED) SYSTEM CALL HANDLING
-------------------------------------
-In addition the mlock()/mlockall() system calls, an application can request
+In addition to the mlock()/mlockall() system calls, an application can request
that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9f1f09a2bc9b..6510a0fd7031 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1924,7 +1924,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
+ appended to the device tree bootargs property.
endchoice
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index d1c3f3a71c94..4f697edd0bad 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -22,7 +22,7 @@
#ifndef __ASSEMBLY__
-/* Unwind reason code according the the ARM EABI documents */
+/* Unwind reason code according to the ARM EABI documents */
enum unwind_reason_code {
URC_OK = 0, /* operation completed successfully */
URC_CONTINUE_UNWIND = 8,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 355b08936871..2a7ffd01065e 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -752,7 +752,7 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
}
/**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * _init_main_clk - get a struct clk * for the hwmod's main functional clk
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
@@ -790,7 +790,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
}
/**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
@@ -834,7 +834,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
}
/**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 01de542432a6..6f92e75b6c35 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -423,7 +423,7 @@ static void __init imote2_stargate2_init(void)
}
#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
+/* As the imote2 doesn't currently have a conventional SD slot
* there is no option to hotplug cards, making all this rather simple
*/
static int imote2_mci_get_ro(struct device *dev)
diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S
index b93170e1cc93..d0f01cff23b3 100644
--- a/arch/arm64/crypto/aes-neon.S
+++ b/arch/arm64/crypto/aes-neon.S
@@ -47,7 +47,7 @@
prepare .LReverse_Sbox, .LReverse_ShiftRows, \temp
.endm
- /* apply SubBytes transformation using the the preloaded Sbox */
+ /* apply SubBytes transformation using the preloaded Sbox */
.macro sub_bytes, in
sub v9.16b, \in\().16b, v12.16b
tbl \in\().16b, {v16.16b-v19.16b}, \in\().16b
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 86b5a095c5a1..9c8612385e00 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -480,7 +480,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
#ifdef CONFIG_EXACT_HWERR
/* Make sure all pending read/writes complete. This will ensure any
* accesses which could cause hardware errors completes, and signal
- * the the hardware before we do something silly, like crash the
+ * the hardware before we do something silly, like crash the
* kernel. We don't need to work around anomaly 05000312, since
* we are already atomic
*/
diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c
index 86318a16a252..dc21f94aaaaf 100644
--- a/arch/c6x/platforms/cache.c
+++ b/arch/c6x/platforms/cache.c
@@ -437,7 +437,7 @@ void __init c6x_cache_init(void)
if (!cache_base)
return;
- /* Set L2 caches on the the whole L2 SRAM memory */
+ /* Set L2 caches on the whole L2 SRAM memory */
L2_cache_set_mode(L2MODE_SIZE);
/* Enable L1 */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 45698cd15b7b..bd6ea40f3ef9 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -23,7 +23,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
* The pad bits in the middle are used to prevent the next_ticket number
* overflowing into the now_serving number.
*
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index 2a88c7204e52..809ddb6896db 100644
--- a/arch/ia64/include/asm/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -257,7 +257,7 @@ static inline int uv_numa_blade_id(void)
return 0;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return 0;
diff --git a/arch/m68k/coldfire/intc-2.c b/arch/m68k/coldfire/intc-2.c
index 995093357c59..f74f0e473119 100644
--- a/arch/m68k/coldfire/intc-2.c
+++ b/arch/m68k/coldfire/intc-2.c
@@ -7,7 +7,7 @@
* family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
* controllers, and the 547x and 548x families which have only one of them.
*
- * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * The external 7 fixed interrupts are part of the Edge Port unit of these
* ColdFire parts. They can be configured as level or edge triggered.
*
* (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff986a23..30052da1f1a4 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -211,7 +211,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
/*
* Get a pointer to where the new child's register block should have
* been pushed.
- * The Meta's stack grows upwards, and the context is the the first
+ * The Meta's stack grows upwards, and the context is the first
* thing to be pushed by TBX (phew)
*/
*childregs = *current_pt_regs();
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index ef548510b951..d0c28f6863b4 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -446,7 +446,7 @@ TRAP_return: /* Make global symbol for debugging */
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look like the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index bfeb8f3c0be6..203767dbeb64 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -16,7 +16,7 @@
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
* is to trigger a wakeup.
*/
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index df69bfd2b006..4ec669f5b0d4 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index)
* offsetof() to determine the offsets into packet headers.
* For example, offsetof(ethhdr, protocol) returns the offset
* of the ethernet protocol field. The bitmask selects which
- * bytes to include the the tag, with bit offset X selecting
+ * bytes to include in the tag, with bit offset X selecting
* byte at offset X from the beginning of the packet data.
* @len: Number of bytes to include. Usually this is the sizeof()
* the field.
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index b4548690ade9..98bea1038f46 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -32,7 +32,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*/
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index c9eccf5df912..d7ef0ef31b09 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -1166,7 +1166,7 @@ int __init kvm_mips_init(void)
* requires TLBs. The TLB handling code is statically linked with
* the rest of the kernel (tlb.c) to avoid the possibility of
* double faulting. The issue is that the TLB code references
- * routines that are part of the the KVM module, which are only
+ * routines that are part of the KVM module, which are only
* available once the module is loaded.
*/
kvm_mips_gfn_to_pfn = gfn_to_pfn;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 05b1d7cf9514..1647426364b9 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -350,7 +350,7 @@ static void co_cache_error_call_notifiers(unsigned long val)
}
/*
- * Called when the the exception is recoverable
+ * Called when the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -359,7 +359,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
}
/**
- * Called when the the exception is not recoverable
+ * Called when the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d428e8471eec..1d1eb1e10ae2 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -144,7 +144,7 @@ void xlr_percpu_fmn_init(void)
* For sending FMN messages, we need credits on the destination
* bucket. Program the credits this core has on the 128 possible
* destination buckets.
- * We cannot use a loop here, because the the first argument has
+ * We cannot use a loop here, because the first argument has
* to be a constant integer value.
*/
COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 34a05a1a990b..af6f17b32531 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -52,7 +52,7 @@ static inline void logmpp(u64 x)
/*
* For a snooping icache, we still need a dummy icbi to purge all the
* prefetched instructions from the ifetch buffers. We also need a sync
- * before the icbi to order the the actual stores to memory that might
+ * before the icbi to order the actual stores to memory that might
* have modified instructions with the icbi.
*/
#define PURGE_PREFETCHED_INS \
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index 334459ad145b..b3219b0ca2c4 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -246,7 +246,7 @@ static inline unsigned int ev_int_get_mask(unsigned int interrupt,
* ev_int_eoi - signal the end of interrupt processing
* @interrupt: the interrupt number
*
- * This function signals the end of processing for the the specified
+ * This function signals the end of processing for the specified
* interrupt, which must be the interrupt currently in service. By
* definition, this is also the highest-priority interrupt.
*
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index ac6432d9be46..a18702780733 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -30,7 +30,7 @@ struct arch_hw_breakpoint {
u16 len; /* length of the target data symbol */
};
-/* Note: Don't change the the first 6 bits below as they are in the same order
+/* Note: Don't change the first 6 bits below as they are in the same order
* as the dabr and dabrx.
*/
#define HW_BRK_TYPE_READ 0x01
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index d48125d0c048..01ecece4ca83 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -94,7 +94,7 @@ __secondary_hold_acknowledge:
#ifdef CONFIG_RELOCATABLE
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
- * is used by kexec-tools to keep the the kdump kernel in the
+ * is used by kexec-tools to keep the kdump kernel in the
* crash_kernel region. The loader is responsible for
* observing the alignment requirement.
*/
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 7e408bfc7948..5b381759bbf0 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -948,7 +948,7 @@ void flush_dcache_icache_hugepage(struct page *page)
* (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table
*
* So long as we atomically load page table pointers we are safe against teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index c949ca055712..27cc1a222295 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -9,7 +9,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * This file is a driver for the the General Purpose Timer (gpt) devices
+ * This file is a driver for the General Purpose Timer (gpt) devices
* found on the MPC5200 SoC. Each timer has an IO pin which can be used
* for GPIO or can be used to raise interrupts. The timer function can
* be used independently from the IO pin, or it can be used to control
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 860a59eb8ea2..08d0a3c447a0 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -251,7 +251,7 @@ static void briq_restart(char *cmd)
* Per default, input/output-device points to the keyboard/screen
* If no card is installed, the built-in serial port is used as a fallback.
* But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
- * the the built-in serial node. Instead, a /failsafe node is created.
+ * to the built-in serial node. Instead, a /failsafe node is created.
*/
static void chrp_init_early(void)
{
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 6c9ff2b95119..f3c0a7ace5bf 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1733,7 +1733,7 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
/*
* This function is supposed to be called on basis of PE from top
- * to bottom style. So the the I/O or MMIO segment assigned to
+ * to bottom style. So the I/O or MMIO segment assigned to
* parent PE could be overrided by its child PEs if necessary.
*/
static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index e599259d84fc..e1766153202e 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -293,7 +293,7 @@ static void write_ciabr(unsigned long ciabr)
* set_ciabr() - set the CIABR
* @addr: The value to set.
*
- * This function sets the correct privilege value into the the HW
+ * This function sets the correct privilege value into the HW
* breakpoint address before writing it up in the CIABR register.
*/
static void set_ciabr(unsigned long addr)
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index e6a1578fc000..c14898e820ba 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1128,7 +1128,7 @@ static void debug_sample_entry(struct hws_combined_entry *sample,
* combined-sampling data entry consists of a basic- and a diagnostic-sampling
* data entry. The sampling function is determined by the flags in the perf
* event hardware structure. The function always works with a combined-sampling
- * data entry but ignores the the diagnostic portion if it is not available.
+ * data entry but ignores the diagnostic portion if it is not available.
*
* Note that the implementation focuses on basic-sampling data entries and, if
* such an entry is not valid, the entire combined-sampling data entry is
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 5c586c78ca8d..5d4376f117d2 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -187,7 +187,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* prevent the pagetables from being freed on s390.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 9ce5afe167ff..ec780d885a4c 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -306,7 +306,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
+ * firmware can sample the value before the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index 2e5c4fc2daa9..d2154ab0bfe2 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -219,7 +219,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on sparc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_disable();
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 60d62a292fce..a9554b167e96 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -116,7 +116,7 @@
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
* Likewise, INTCTRL_K is removed and re-added during device
- * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * interrupts, as is the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
* to know our current state.
diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h
index df10a662cc25..50a3d5cbad20 100644
--- a/arch/tile/include/gxio/trio.h
+++ b/arch/tile/include/gxio/trio.h
@@ -206,7 +206,7 @@ typedef struct {
/* Initialize a TRIO context.
*
* This function allocates a TRIO "service domain" and maps the MMIO
- * registers into the the caller's VA space.
+ * registers into the caller's VA space.
*
* @param trio_index Which TRIO shim; Gx36 must pass 0.
* @param context Context object to be initialized.
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index 862973074bf9..b4b9ddfb737d 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -275,7 +275,7 @@ P("\n");
/*
* Called after execve() has started the new image. This allows us
- * to reset the info state. Note that the the mmap'ed memory, if there
+ * to reset the info state. Note that the mmap'ed memory, if there
* was any, has already been unmapped by the exec.
*/
void single_step_execve(void)
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index cf87de3fc390..15d1b0a8eff8 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -91,7 +91,7 @@ static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*
* We use an xadd covering *both* parts of the lock, to increment the tail and
* also load the position of the head, which takes care of memory ordering
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index a00ad8f2a657..3260b75fd427 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -512,7 +512,7 @@ static inline int uv_numa_blade_id(void)
return uv_hub_info->numa_blade_id;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return uv_cpu_to_blade[cpu];
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 1d74d161687c..bd0c61cf5991 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -365,7 +365,7 @@ system_call_fastpath:
*/
ret_from_sys_call:
testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
- jnz int_ret_from_sys_call_fixup /* Go the the slow path */
+ jnz int_ret_from_sys_call_fixup /* Go to the slow path */
LOCKDEP_SYS_EXIT
DISABLE_INTERRUPTS(CLBR_NONE)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 32bf19ef3115..f4b39a837846 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7400,7 +7400,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
if (current->mm == kvm->mm) {
/*
* Free memory regions allocated on behalf of userspace,
- * unless the the memory map has changed due to process exit
+ * unless the memory map has changed due to process exit
* or fd copying.
*/
struct kvm_userspace_memory_region mem;
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 81bf3d2af3eb..5862a503e0fa 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -288,7 +288,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
@@ -360,7 +360,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_disable();
pgdp = pgd_offset(mm, addr);
diff --git a/arch/x86/platform/efi/efi_thunk_64.S b/arch/x86/platform/efi/efi_thunk_64.S
index ff85d28c50f2..13f24526ccd0 100644
--- a/arch/x86/platform/efi/efi_thunk_64.S
+++ b/arch/x86/platform/efi/efi_thunk_64.S
@@ -7,7 +7,7 @@
* The below thunking functions are only used after ExitBootServices()
* has been called. This simplifies things considerably as compared with
* the early EFI thunking because we can leave all the kernel state
- * intact (GDT, IDT, etc) and simply invoke the the 32-bit EFI runtime
+ * intact (GDT, IDT, etc) and simply invoke the 32-bit EFI runtime
* services from __KERNEL32_CS. This means we can continue to service
* interrupts across an EFI mixed mode call.
*
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 55f388ef481a..e0adc53e9645 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -689,7 +689,7 @@ char * __init xen_memory_setup(void)
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
- * We tried to make the the memblock_reserve more selective so
+ * We tried to make the memblock_reserve more selective so
* that it would be clear what region is reserved. Sadly we ran
* in the problem wherein on a 64-bit hypervisor with a 32-bit
* initial domain, the pt_base has the cr3 value which is not
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index e256f2270ec9..23f291682f84 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -6,7 +6,7 @@
* For the new V3 MMU we remap the TLB from virtual == physical
* to the standard Linux mapping used in earlier MMU's.
*
- * The the MMU we also support a new configuration register that
+ * In the MMU we also support a new configuration register that
* specifies how the S32C1I instruction operates with the cache
* controller.
*
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 82bbfa5a05b3..94044cc958c2 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -384,7 +384,7 @@ common_exception:
/* Save optional registers. */
save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
-
+
#ifdef CONFIG_TRACE_IRQFLAGS
l32i a4, a1, PT_DEPC
/* Double exception means we came here with an exception
@@ -433,7 +433,7 @@ common_exception_return:
* We need to check some flags for signal handling and rescheduling,
* and have to restore WB and WS, extra states, and all registers
* in the register file that were in use in the user task.
- * Note that we don't disable interrupts here.
+ * Note that we don't disable interrupts here.
*/
_bbsi.l a4, TIF_NEED_RESCHED, 3f
@@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
* of the proper size instead.
*
* This algorithm simply backs out the register changes started by the user
- * excpetion handler, makes it appear that we have started a window underflow
+ * exception handler, makes it appear that we have started a window underflow
* by rotating the window back and then setting the old window base (OWB) in
* the 'ps' register with the rolled back window base. The 'movsp' instruction
* will be re-executed and this time since the next window frames is in the
* active AR registers it won't cause an exception.
*
* If the WindowUnderflow code gets a TLB miss the page will get mapped
- * the the partial windeowUnderflow will be handeled in the double exception
+ * and the partial window underflow will be handled in the double exception
* handler.
*
* Entry condition:
@@ -1567,8 +1567,8 @@ ENTRY(fast_second_level_miss)
2: /* Special case for cache aliasing.
* We (should) only get here if a clear_user_page, copy_user_page
- * or the aliased cache flush functions got preemptively interrupted
- * by another task. Re-establish temporary mapping to the
+ * or the aliased cache flush functions got preemptively interrupted
+ * by another task. Re-establish temporary mapping to the
* TLBTEMP_BASE areas.
*/
diff --git a/crypto/asymmetric_keys/pkcs7_parser.h b/crypto/asymmetric_keys/pkcs7_parser.h
index efc7dc9b8f9c..0e51bec18672 100644
--- a/crypto/asymmetric_keys/pkcs7_parser.h
+++ b/crypto/asymmetric_keys/pkcs7_parser.h
@@ -40,7 +40,7 @@ struct pkcs7_signed_info {
*
* This contains the generated digest of _either_ the Content Data or
* the Authenticated Attributes [RFC2315 9.3]. If the latter, one of
- * the attributes contains the digest of the the Content Data within
+ * the attributes contains the digest of the Content Data within
* it.
*/
struct public_key_signature sig;
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 853aa2dbdb61..898c59164ec6 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -47,7 +47,7 @@
/*
* Common set of includes for all ACPICA source files.
* We put them here because we don't want to duplicate them
- * in the the source code again and again.
+ * in the source code again and again.
*
* Note: The order of these include files is important.
*/
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 7d2486005e3f..b9b082980926 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -435,7 +435,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
* The 64-bit X fields are optional extensions to the original 32-bit FADT
* V1.0 fields. Even if they are present in the FADT, they are optional and
* are unused if the BIOS sets them to zero. Therefore, we must copy/expand
- * 32-bit V1.0 fields to the 64-bit X fields if the the 64-bit X field is
+ * 32-bit V1.0 fields to the 64-bit X fields if the 64-bit X field is
* originally zero.
*
* For ACPI 1.0 FADTs (that contain no 64-bit addresses), all 32-bit address
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index dd9dfa15e9d1..d086acf9562f 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -563,7 +563,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
wake_up_interruptible(&apm_waitqueue);
/*
- * Wait for the the suspend_acks_pending variable to drop to
+ * Wait for the suspend_acks_pending variable to drop to
* zero, meaning everybody acked the suspend event (or the
* process was killed.)
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 02225eb19cf6..619f3a30ec55 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -111,7 +111,7 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
}
/**
- * fifo_icap_set_read_size - Set the the size register.
+ * fifo_icap_set_read_size - Set the size register.
* @drvdata: a pointer to the drvdata.
* @data: the size of the following read transaction, in words.
**/
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index 2697e87d5b34..0cf96de565c1 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -168,7 +168,7 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv)
/*
* Look for the timer stop flag in the different states, so that we know
* if the broadcast timer has to be set up. The loop is in the reverse
- * order, because usually one of the deeper states have this flag set.
+ * order, because usually one of the deeper states has this flag set.
*/
for (i = drv->state_count - 1; i >= 0 ; i--) {
if (drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP) {
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 5da5b98b8f29..60f2267c1350 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -53,7 +53,7 @@
#define CMD0_IRQ_THRESHOLD 1
/*
- * The timeout period (in jiffies) for a PDU. When the the number of PDUs in
+ * The timeout period (in jiffies) for a PDU. When the number of PDUs in
* flight is greater than the STAT_IRQ_THRESHOLD or 0 the timer is disabled.
* When there are packets in flight but lower than the threshold, we enable
* the timer and at expiry, attempt to remove any processed packets from the
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 187a8fd7eee7..75b0d3dce17c 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -435,7 +435,7 @@ static int hash_get_device_data(struct hash_ctx *ctx,
* @keylen: The lengt of the key.
*
* Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the the hw design spec. Either due to incorrect info in the
+ * specified in the hw design spec. Either due to incorrect info in the
* spec or due to a bug in the hw.
*/
static void hash_hw_write_key(struct hash_device_data *device_data,
diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c
index 228bbf910461..d028f44916cc 100644
--- a/drivers/firmware/efi/runtime-wrappers.c
+++ b/drivers/firmware/efi/runtime-wrappers.c
@@ -82,7 +82,7 @@ static DEFINE_SPINLOCK(efi_runtime_lock);
* In order to prevent deadlocks under NMI, the wrappers for these functions
* may only grab the efi_runtime_lock or rtc_lock spinlocks if !efi_in_nmi().
* However, not all of the services listed are reachable through NMI code paths,
- * so the the special handling as suggested by the UEFI spec is only implemented
+ * so the special handling as suggested by the UEFI spec is only implemented
* for QueryVariableInfo() and SetVariable(), as these can be reached in NMI
* context through efi_pstore_write().
*/
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 7818cd1453ae..950d02ab6e61 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -471,7 +471,7 @@ static int ichx_gpio_probe(struct platform_device *pdev)
/*
* If necessary, determine the I/O address of ACPI/power management
- * registers which are needed to read the the GPE0 register for GPI pins
+ * registers which are needed to read the GPE0 register for GPI pins
* 0 - 15 on some chipsets.
*/
if (!ichx_priv.desc->uses_gpe0)
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index b72906f5b999..1c24057610c3 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -131,7 +131,7 @@ static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned gpio_num,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
index 488f51d19427..96e6f204f66c 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
@@ -64,7 +64,7 @@ struct device_process_node {
*
* @initialize: Initializes the pipelines and memory module for that device.
*
- * @start: Initializes the resources/modules the the device needs for queues
+ * @start: Initializes the resources/modules that the device needs for queues
* execution. This function is called on device initialization and after the
* system woke up after suspension.
*
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 679b10e34fb5..9d9e5d7d505b 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1623,7 +1623,7 @@ EXPORT_SYMBOL(drm_mode_create_dirty_info_property);
* drm_mode_create_suggested_offset_properties - create suggests offset properties
* @dev: DRM device
*
- * Create the the suggested x/y offset property for connectors.
+ * Create the suggested x/y offset property for connectors.
*/
int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
{
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 1134526286c8..8fbb82448a16 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -537,12 +537,12 @@ EXPORT_SYMBOL(drm_mm_replace_node);
*
* The DRM range allocator supports this use-case through the scanning
* interfaces. First a scan operation needs to be initialized with
- * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The the driver adds
+ * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The driver adds
* objects to the roaster (probably by walking an LRU list, but this can be
* freely implemented) until a suitable hole is found or there's no further
* evitable object.
*
- * The the driver must walk through all objects again in exactly the reverse
+ * The driver must walk through all objects again in exactly the reverse
* order to restore the allocator state. Note that while the allocator is used
* in the scan mode no other operation is allowed.
*
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 27ea6bdebce7..085b6edba9ed 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2465,7 +2465,7 @@ int __i915_add_request(struct intel_engine_cs *ring,
/* Whilst this request exists, batch_obj will be on the
* active_list, and so will hold the active reference. Only when this
- * request is retired will the the batch_obj be moved onto the
+ * request is retired will the batch_obj be moved onto the
* inactive_list and lose its active reference. Hence we do not need
* to explicitly hold another reference here.
*/
diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c
index 1719078c763a..9f61665e9cb1 100644
--- a/drivers/gpu/drm/i915/i915_gem_userptr.c
+++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
@@ -241,7 +241,7 @@ i915_mmu_notifier_add(struct drm_device *dev,
* either has cancelled gup work queued and we need to
* return back to the user to give time for the gup-workers
* to flush their object references upon which the object will
- * be removed from the interval-tree, or the the range is
+ * be removed from the interval-tree, or the range is
* still in use by another client and the overlap is invalid.
*
* If we do have an overlap, we cannot use the interval tree
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f75173c20f47..30702cd7a74d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2915,7 +2915,7 @@ void intel_finish_reset(struct drm_device *dev)
/*
* Flips in the rings have been nuked by the reset,
* so update the base address of all primary
- * planes to the the last fb to make sure we're
+ * planes to the last fb to make sure we're
* showing the correct fb after a reset.
*/
intel_update_primary_planes(dev);
@@ -11170,7 +11170,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
}
/* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
+ * update the output configuration. */
intel_modeset_update_state(dev, prepare_pipes);
modeset_update_crtc_power_domains(dev);
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 92be50c39ffd..2be3040b28f1 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -2802,8 +2802,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t
ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 00c0d2ba22d3..36af5f14f622 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -353,7 +353,7 @@
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index bd7519fdd3f4..fa3512763c50 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -410,7 +410,7 @@ void radeon_doorbell_get_kfd_info(struct radeon_device *rdev,
/*
* radeon_wb_*()
- * Writeback is the the method by which the the GPU updates special pages
+ * Writeback is the method by which the GPU updates special pages
* in memory with the status of certain GPU events (fences, ring pointers,
* etc.).
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index df09ca7c4889..98311ab2b5ba 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -45,7 +45,7 @@
* for GPU/CPU synchronization. When the fence is written,
* it is expected that all buffers associated with that fence
* are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed. Whether
+ * that the relevant GPU caches have been flushed. Whether
* we use a scratch register or memory location depends on the asic
* and whether writeback is enabled.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c
index 2a5a4a9e772d..9c987173cd81 100644
--- a/drivers/gpu/drm/radeon/radeon_vm.c
+++ b/drivers/gpu/drm/radeon/radeon_vm.c
@@ -40,8 +40,8 @@
* can be mapped as snooped (cached system pages) or unsnooped
* (uncached system pages).
* Each VM has an ID associated with it and there is a page table
- * associated with each VMID. When execting a command buffer,
- * the kernel tells the the ring what VMID to use for that command
+ * associated with each VMID. When executing a command buffer,
+ * the kernel tells the ring what VMID to use for that command
* buffer. VMIDs are allocated dynamically as commands are submitted.
* The userspace drivers maintain their own address space and the kernel
* sets up their pages tables accordingly when they submit their
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 2978f5ee8d2a..865ad3093211 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -573,7 +573,7 @@ EXPORT_SYMBOL_GPL(vmbus_close);
* vmbus_sendpacket() - Send the specified buffer on the given channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @requestid: Identifier of the request
* @type: Type of packet that is being send e.g. negotiate, time
* packet etc.
@@ -794,7 +794,7 @@ EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
* vmbus_recvpacket() - Retrieve the user packet on the specified channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @buffer_actual_len: The actual size of the data after it was received
* @requestid: Identifier of the request
*
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index f518b8d7a5b5..f9196aabf890 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -882,8 +882,8 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the information we
- * need from DSDT.
+ * VMBUS is an acpi enumerated device. Get the IRQ information
+ * from DSDT.
*/
static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index 033d6aca47d3..d41d7e3bf31c 100644
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -117,7 +117,7 @@ static int ucd9200_probe(struct i2c_client *client,
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
- * for the the phases of the rail.
+ * for the phases of the rail.
*/
for (i = 0; i < info->pages; i++) {
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 28cfe97cf1e9..231b54591e2b 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -87,7 +87,7 @@
* These 3 values (SDR and DDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
+ * are also the possible values for ipath_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define IPATH_IB_SDR 1
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index ffd48bfc4923..43b6e64411d1 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -333,7 +333,7 @@ struct qib_verbs_txreq {
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for qib_link_speed_enabled and active
+ * are also the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index ced07391304b..a4ab4452e19b 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -17,7 +17,7 @@
/*
* Timer function which is run every scan_ms ms when the device is opened.
- * The dev input variable is set to the the input_dev pointer.
+ * The dev input variable is set to the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_polled_dev *dev)
{
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 114f3bcba1b0..24c15bfb2199 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1566,7 +1566,7 @@ reset_hfcsusb(struct hfcsusb *hw)
write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
((hw->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 7dc93aa004c8..ff8e9a523b64 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -202,7 +202,7 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
/*:*/
/*H:030
- * Let's jump straight to the the main loop which runs the Guest.
+ * Let's jump straight to the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
* going around and around until something interesting happens.
*/
diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h
index e404b6e44802..ce0fb855c705 100644
--- a/drivers/media/dvb-frontends/tda1002x.h
+++ b/drivers/media/dvb-frontends/tda1002x.h
@@ -1,6 +1,6 @@
/*
TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index 71fb63299de7..17534ff576ca 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1134,7 +1134,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
state->pll_pfactor = 0;
}
- /* Establish any defaults the the user didn't pass */
+ /* Establish any defaults the user didn't pass */
tda10048_establish_defaults(&state->frontend);
/* Set the xtal and freq defaults */
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..1f8820f5f8c0 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -37,7 +37,7 @@
(compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
/* We calculate the baseband frequencies of the carrier and the pilot tones
- * based on the the sampling rate of the audio rds fifo. */
+ * based on the sampling rate of the audio rds fifo. */
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index 2ad65eb29832..00e0818abfc9 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -555,7 +555,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f)
reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94);
/* Okay, we've wasted time working out the correct value,
- but if we use it, it fouls the the window alignment.
+ but if we use it, it fouls the window alignment.
Fudge it to what we want... */
reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16));
reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16));
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 4b0bec3766ed..100d81e1b770 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -635,7 +635,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
}
/* Check that the hardware is accessible. If the status bytes are
- * 0xFF then the device is not accessible, the the IRQ belongs
+ * 0xFF then the device is not accessible, the IRQ belongs
* to another driver.
* 4 x u32 interrupt registers.
*/
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 9a6c2cc38acb..add8613b4e05 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -316,7 +316,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
* vpbe_get_output - Get output
* @vpbe_dev - vpbe device ptr
*
- * return current vpbe output to the the index
+ * return current vpbe output to the index
*/
static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
{
diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 8a2fd8c33d42..d92eb5634d04 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -505,7 +505,7 @@ static int fimc_capture_open(struct file *file)
if (ret == 0 && vc->user_subdev_api && vc->inh_sensor_ctrls) {
/*
- * Recreate controls of the the video node to drop
+ * Recreate controls of the video node to drop
* any controls inherited from the sensor subdev.
*/
fimc_ctrls_delete(vc->ctx);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index deca80903c3a..27b8c49da605 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1701,7 +1701,7 @@ void omap3isp_print_status(struct isp_device *isp)
* To solve this problem power management support is split into prepare/complete
* and suspend/resume operations. The pipelines are stopped in prepare() and the
* ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
- * resume(), and the the pipelines are restarted in complete().
+ * resume(), and the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not modelled explicitly
* yet.
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index d56f927fc31a..b5d2e805380d 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 474a17e4db0c..4c7f8fed8046 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h
index 0f461ca10cb9..82d19dcdebc0 100644
--- a/drivers/media/usb/dvb-usb/friio.h
+++ b/drivers/media/usb/dvb-usb/friio.h
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
index 52bdb569760b..414c1b752911 100644
--- a/drivers/media/usb/gspca/finepix.c
+++ b/drivers/media/usb/gspca/finepix.c
@@ -143,7 +143,7 @@ again:
* for, then it's the end of the
* frame. Sometimes the jpeg is not complete,
* but there's nothing we can do. We also end
- * here if the the jpeg ends right at the end
+ * here if the jpeg ends right at the end
* of the frame. */
gspca_frame_add(gspca_dev, LAST_PACKET,
data, len);
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 2e8c3afe4ec4..b7b5a1f630af 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1313,7 +1313,7 @@ static int tm6000_usb_probe(struct usb_interface *interface,
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
-/* check if the the device has the iso in endpoint at the correct place */
+/* check if the device has the iso in endpoint at the correct place */
if (!dev->isoc_in.endp) {
printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
rc = -ENODEV;
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 20ccc9d315dc..9ababe952b56 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1000,7 +1000,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
}
/* Synchronize to the input stream by waiting for the FID bit to be
- * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE.
* stream->last_fid is initialized to -1, so the first isochronous
* frame will always be in sync.
*
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index b08407225db1..2c8ce861e6ea 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -984,7 +984,7 @@ static void v4l_sanitize_format(struct v4l2_format *fmt)
/*
* The v4l2_pix_format structure has been extended with fields that were
* not previously required to be set to zero by applications. The priv
- * field, when set to a magic value, indicates the the extended fields
+ * field, when set to a magic value, indicates that the extended fields
* are valid. Otherwise they will contain undefined values. To simplify
* the API towards drivers zero the extended fields and set the priv
* field to the magic value when the extended pixel format structure
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 04644e7b42b1..303b322756c7 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -373,7 +373,7 @@ static const struct lpddr2_addressing *get_addressing_table(
}
/*
- * Find the the right timing table from the array of timing
+ * Find the right timing table from the array of timing
* tables of the device using DDR clock frequency
*/
static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 613231c16194..4591bd235a00 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
* @target: per target private data
* @sdev: SCSI device
*
- * Update the target negotiation parameters based on the the Inquiry
+ * Update the target negotiation parameters based on the Inquiry
* data, adapter capabilities, and NVRAM settings.
**/
static void
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index cc1a404328c2..69f256d6a3ed 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -889,7 +889,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
- * This function sets the the operating point of the ARM.
+ * This function sets the operating point of the ARM.
*/
int db8500_prcmu_set_arm_opp(u8 opp)
{
diff --git a/drivers/misc/mic/bus/mic_bus.c b/drivers/misc/mic/bus/mic_bus.c
index 961ae90aae47..1b15af8c5101 100644
--- a/drivers/misc/mic/bus/mic_bus.c
+++ b/drivers/misc/mic/bus/mic_bus.c
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ drivers/virtio/virtio.c
*/
#include <linux/slab.h>
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 913de07e577c..6482a9c4eb44 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -48,7 +48,7 @@
* kernel/user requirements.
*
* Blade percpu resources reserved for kernel use. These resources are
- * reserved whenever the the kernel context for the blade is loaded. Note
+ * reserved whenever the kernel context for the blade is loaded. Note
* that the kernel context is not guaranteed to be always available. It is
* loaded on demand & can be stolen by a user if the user demand exceeds the
* kernel demand. The kernel can always reload the kernel context but
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 95c894482fdd..f87520cfb787 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1594,7 +1594,7 @@ out_2:
* by xpc_notify_senders_of_disconnect_uv(), and to also get an
* error returned here will confuse them. Additionally, since
* in this case the channel is being disconnected we don't need
- * to put the the msg_slot back on the free list.
+ * to put the msg_slot back on the free list.
*/
if (cmpxchg(&msg_slot->func, func, NULL) != func) {
ret = xpSuccess;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 33f3c3c54dbc..6429d9cc6aa1 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -946,7 +946,7 @@ static uint8_t gpmi_read_byte(struct mtd_info *mtd)
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
- * because the the operations are the same.
+ * because the operations are the same.
*/
static void block_mark_swapping(struct gpmi_nand_data *this,
void *payload, void *auxiliary)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index c5be82d9d345..397daa315e45 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -253,7 +253,7 @@ struct ubi_fm_pool {
/**
* struct ubi_volume - UBI volume description data structure.
- * @dev: device object to make use of the the Linux device model
+ * @dev: device object to make use of the Linux device model
* @cdev: character device object to create character device
* @ubi: reference to the UBI device description object
* @vol_id: volume ID
@@ -384,7 +384,7 @@ struct ubi_debug_info {
/**
* struct ubi_device - UBI device description structure
- * @dev: UBI device object to use the the Linux device model
+ * @dev: UBI device object to use for the Linux device model
* @cdev: character device object to create character device
* @ubi_num: UBI device number
* @ubi_name: UBI device name
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 8f7bde6a85d6..679e90915895 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -728,7 +728,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
/**
* sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
- * @e: the the physical eraseblock to erase
+ * @e: the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
*
* This function returns zero in case of success and a negative error code in
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 6c6764312285..82af8c28ca5c 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -533,7 +533,7 @@ static int xcan_rx(struct net_device *ndev)
* @isr: interrupt status register value
*
* This is the CAN error interrupt and it will
- * check the the type of error and forward the error
+ * check the type of error and forward the error
* frame to upper layers.
*/
static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c
index e0f3d197e7f2..e02ffda21bce 100644
--- a/drivers/net/ethernet/agere/et131x.c
+++ b/drivers/net/ethernet/agere/et131x.c
@@ -1109,7 +1109,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
writel(0, &rxmac->mif_ctrl);
writel(0, &rxmac->space_avail);
- /* Initialize the the mif_ctrl register
+ /* Initialize the mif_ctrl register
* bit 3: Receive code error. One or more nibbles were signaled as
* errors during the reception of the packet. Clear this
* bit in Gigabit, set it in 100Mbit. This was derived
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index 47bfea24b9e1..b93c11cd3b73 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1234,7 +1234,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
* @budget : maximum number of packets that the current CPU can receive from
* all interfaces.
* Description :
- * This function implements the the reception process.
+ * This function implements the reception process.
* Also it runs the TX completion thread
*/
static int xgmac_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index e6b790f0d9dc..a3b5c3de146b 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2465,7 +2465,7 @@ static irqreturn_t be_intx(int irq, void *dev)
}
be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- /* Return IRQ_HANDLED only for the the first spurious intr
+ /* Return IRQ_HANDLED only for the first spurious intr
* after a valid intr to stop the kernel from branding
* this irq as a bad one!
*/
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 45c8c864104e..960e5fa4fb7b 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -3986,7 +3986,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
* @hw: Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*/
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 48b74a549155..392eb5748897 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3892,7 +3892,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
* @hw: pointer to the HW structure
*
* ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
- * register, so the the bus width is hard coded.
+ * register, so the bus width is hard coded.
**/
static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
index 9f5457c9e627..bfaf4099c9a6 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
@@ -809,7 +809,7 @@ static s32 fm10k_mbx_read(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
* @hw: pointer to hardware structure
* @mbx: pointer to mailbox
*
- * This function copies the message from the the message array to mbmem
+ * This function copies the message from the message array to mbmem
**/
static void fm10k_mbx_write(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
{
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 0f69ef81751a..b8c3e7880e23 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2166,7 +2166,7 @@ out:
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 70cc4c5c0a01..c006a48e03cd 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -245,7 +245,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
struct pci_dev *pdev;
- /* determine whether to use the the parent device
+ /* determine whether to use the parent device
*/
if (ixgbe_pcie_from_parent(&adapter->hw))
pdev = adapter->pdev->bus->parent->self;
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index a4cdf2f8041a..59244c553c47 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2158,7 +2158,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
/*
* In PCI 33 mode, the P_PLL is not used, and therefore,
- * the the P_PLL_LOCK bit in the adapter_status register will
+ * the P_PLL_LOCK bit in the adapter_status register will
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 3b67d60d4378..b8da6e89059a 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -83,7 +83,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* returns: 0 on success, -ETIMEDOUT on a timeout
*
* Writes the value to the requested register by first writing the value
- * into MWD register. The the MCR register is then appropriately setup
+ * into MWD register. The MCR register is then appropriately setup
* to finish the write operation.
*/
static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 5a34e72bab9a..6113a29f01bc 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -250,14 +250,14 @@ struct i2400m_barker_db;
*
* @bus_setup: [optional fill] Function called by the bus-generic code
* [i2400m_setup()] to setup the basic bus-specific communications
- * to the the device needed to load firmware. See LIFE CYCLE above.
+ * to the device needed to load firmware. See LIFE CYCLE above.
*
* NOTE: Doesn't need to upload the firmware, as that is taken
* care of by the bus-generic code.
*
* @bus_release: [optional fill] Function called by the bus-generic
* code [i2400m_release()] to shutdown the basic bus-specific
- * communications to the the device needed to load firmware. See
+ * communications to the device needed to load firmware. See
* LIFE CYCLE above.
*
* This function does not need to reset the device, just tear down
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 0b602951ff6b..4466ee71d1e4 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -693,7 +693,7 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq,
* right spot where to insert the packet; we know the queue is
* not empty, so we are not the first ones; we also know we
* are not going to be the last ones. The list is sorted, so
- * we have to insert before the the first guy with an nsn_itr
+ * we have to insert before the first guy with an nsn_itr
* greater that our nsn. */
skb_queue_walk(&roq->queue, skb_itr) {
roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb;
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index f20886ade1cc..1f7b2b922fae 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -233,7 +233,7 @@
* i2400m_tx_skip_tail() Marks unusable FIFO tail space
* i2400m->bus_tx_kick()
*
- * Now i2400m->bus_tx_kick() is the the bus-specific driver backend
+ * Now i2400m->bus_tx_kick() is the bus-specific driver backend
* implementation; that would do:
*
* i2400m->bus_tx_kick()
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index e9cc7787bf5f..fab813d0d6cb 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -77,7 +77,7 @@ struct rx_attention {
* first_msdu is set.
*
* peer_idx_invalid
- * Indicates no matching entries within the the max search
+ * Indicates no matching entries within the max search
* count. Only set when first_msdu is set.
*
* peer_idx_timeout
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index dc6bd8cd9b83..e32154fe1732 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -98,7 +98,7 @@ struct bus_request {
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- * implemented using the asynchronous mode allowing the the bus
+ * implemented using the asynchronous mode allowing the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index eab0ab976af2..9963faaa465f 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1173,7 +1173,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
* Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
+ * response is available in the FIFO
*
* CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index fc08162b5820..68a96e3a0044 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -638,7 +638,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN,
AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT);
- /* on AR92xx, the highest bit of count will make the the chip send
+ /* on AR92xx, the highest bit of count will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 1ad66b76749b..c559e7576141 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1766,7 +1766,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
- /* on AR93xx and newer, count = 0 will make the the chip send
+ /* on AR93xx and newer, count = 0 will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index a1f1127d7808..24cce9db3ce0 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -1609,7 +1609,7 @@ struct wcn36xx_hal_config_bss_params {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -1746,7 +1746,7 @@ struct wcn36xx_hal_config_bss_params_v1 {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -3736,10 +3736,10 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
/* success or failure */
u32 status;
- /* Length of the responce message */
+ /* Length of the response message */
u32 rsp_length;
- /* FIXME: Currently considering the the responce will be less than
+ /* FIXME: Currently considering that the response will be less than
* 100bytes */
u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
} __packed;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index eb8584a9c49a..935f43619c8a 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3818,7 +3818,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
}
/*
- * Suspend the the MAC and update the slot timing
+ * Suspend the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index 81c4ea3c6958..be4f3ade1ae8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -191,7 +191,7 @@ enum iwl_tx_flags {
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
+ * @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @key: security key
* @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
@@ -554,7 +554,7 @@ struct iwl_extended_beacon_notif {
/**
* enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
+ * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
index 5b43616eeb06..939c05b8b854 100644
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
@@ -67,7 +67,7 @@
#include "fw-api.h"
#include "mvm.h"
-/* Maps the driver specific channel width definition to the the fw values */
+/* Maps the driver specific channel width definition to the fw values */
u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
{
switch (chandef->width) {
@@ -88,7 +88,7 @@ u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
/*
* Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
+ * freq) definitions to the fw values
*/
u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index 1fb329dc6744..8462076cf744 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -157,7 +157,7 @@ free_and_exit:
* This function is called when the 'fw_dump' file is opened for
* reading.
* This function dumps firmware memory in different files
- * (ex. DTCM, ITCM, SQRAM etc.) based on the the segments for
+ * (ex. DTCM, ITCM, SQRAM etc.) based on the segments for
* debugging.
*/
static ssize_t
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 8428858204a6..e1f05ad89d9e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -596,7 +596,7 @@ static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
* rsi_sdio_host_intf_read_pkt() - This function reads the packet
from the device.
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
* @length: Length of the data to be read from the device.
*
* Return: 0 on success, -1 on failure.
@@ -627,7 +627,7 @@ int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter,
* rsi_init_sdio_interface() - This function does init specific to SDIO.
*
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
*
* Return: 0 on success, -1 on failure.
*/
diff --git a/drivers/net/wireless/ti/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h
index 2bdec38699f4..bfe998947957 100644
--- a/drivers/net/wireless/ti/wl1251/acx.h
+++ b/drivers/net/wireless/ti/wl1251/acx.h
@@ -1243,7 +1243,7 @@ struct wl1251_acx_arp_filter {
u8 address[16]; /* The IP address used to filter ARP packets.
ARP packets that do not match this address are
dropped. When the IP Version is 4, the last 12
- bytes of the the address are ignored. */
+ bytes of the address are ignored. */
} __attribute__((packed));
struct wl1251_acx_ac_cfg {
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index bcb90e4888dd..c1dc11893cea 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -36,7 +36,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#define pr_fmt(fmt) "acpiphp_glue: " fmt
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
index 7dfef3ee5b53..40511e39cea5 100644
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ b/drivers/pcmcia/pxa2xx_hx4700.c
@@ -33,7 +33,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/*
* IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
* The asic3 default IRQ type is level trigger low level detect, exactly
- * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+ * the signal present on GPIOD4_CF_nCD when a CF card is inserted.
* If the IRQ type is not changed, the asic3 interrupt handler will loop
* repeatedly because it is unable to clear the level trigger interrupt.
*/
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index a6a22054c0ba..ff28b7bce456 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1265,7 +1265,7 @@ static int nmk_gpio_probe(struct platform_device *dev)
platform_set_drvdata(dev, nmk_chip);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index a4814066ea08..53a219d7d6ea 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1636,7 +1636,7 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 62653f50a524..6f0afdff9402 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -302,8 +302,9 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
ret = power_supply_show_property(dev, attr, prop_buf);
if (ret == -ENODEV || ret == -ENODATA) {
- /* When a battery is absent, we expect -ENODEV. Don't abort;
- send the uevent with at least the the PRESENT=0 property */
+ /* When a battery is absent, we expect -ENODEV.
+ * Don't abort; send the uevent with at least
+ * the PRESENT=0 property */
ret = 0;
continue;
}
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index 28871cd7e3b5..f224020e14d8 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -122,7 +122,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
- * configurations, so we use the the first method there, stripping off
+ * configurations, so we use the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 642c77c76b84..a458529e1c61 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3519,7 +3519,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 2035b0d64351..e62a7346428a 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1983,7 +1983,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
/*
* Device's PID has changed. We need to cleanup
* and re-login. If there is another device with
- * the the newly discovered pid, send an scn notice
+ * the newly discovered pid, send an scn notice
* so that its new pid can be discovered.
*/
list_for_each(qe, &rport->port->rport_q) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index ec193a8357d7..8dd83bca7d8f 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -511,7 +511,7 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
* @skb: The receive skb
* @netdev: The associated net device
* @ptype: The packet_type structure which was used to register this handler
- * @orig_dev: The original net_device the the skb was received on.
+ * @orig_dev: The original net_device that the skb was received on.
* (in case dev is a bond)
*
* Returns: 0 for success
@@ -2725,7 +2725,7 @@ module_exit(fcoe_exit);
* fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
* @seq: active sequence in the FLOGI or FDISC exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
@@ -2754,7 +2754,7 @@ done:
* fcoe_logo_resp() - FCoE specific LOGO response handler
* @seq: active sequence in the LOGO exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 34a1b1f333b4..65a53a9eb059 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -213,7 +213,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new)
* that doesn't have a priv (fcf was deleted). However,
* libfcoe will always delete FCFs before trying to add
* them. This is ensured because both recv_adv and
- * age_fcfs are protected by the the fcoe_ctlr's mutex.
+ * age_fcfs are protected by the fcoe_ctlr's mutex.
* This means that we should never get a FCF with a
* non-NULL priv pointer.
*/
@@ -694,7 +694,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
*
* The caller must check that the length is a multiple of 4.
* The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
- * The the skb must also be an fc_frame.
+ * The skb must also be an fc_frame.
*
* This is called from the lower-level driver with spinlocks held,
* so we must not take a mutex here.
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 22a9bb1abae1..025ec5c10978 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -244,7 +244,7 @@ enum sci_controller_states {
SCIC_INITIALIZED,
/**
- * This state indicates the the controller is in the process of becoming
+ * This state indicates that the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 47a013fffae7..07af745220eb 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete(
* permitted. This state is entered from the INITIAL state. This state
* is entered from the STOPPING state.
*
- * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * @SCI_DEV_STARTING: This state indicates that the remote device is in
* the process of becoming ready (i.e. starting). In this state no new
* IO operations are permitted. This state is entered from the STOPPED
* state.
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
index c7ee81d01125..f22950b12b8b 100644
--- a/drivers/scsi/isci/remote_node_context.h
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state {
/**
* struct sci_remote_node_context - This structure contains the data
* associated with the remote node context object. The remote node context
- * (RNC) object models the the remote device information necessary to manage
+ * (RNC) object models the remote device information necessary to manage
* the silicon RNC.
*/
struct sci_remote_node_context {
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 6dcaed0c1fc8..53f17367fd71 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -67,7 +67,7 @@
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
-* @ihost: host on which the the request was queued
+* @ihost: host on which the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 2f9b96826ac0..8a76261d8915 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1680,7 +1680,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -1713,7 +1713,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -1846,7 +1846,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -1878,7 +1878,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index c66088d0fd2a..5f3f42f3671a 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5815,7 +5815,7 @@ reject_out:
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful, the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 5452f1f4220e..69ff3f9fa92b 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2040,7 +2040,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so that the round robin selection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
@@ -5746,7 +5746,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
}
/* This routine decrements the reference count for a ndlp structure. If the
- * count goes to 0, this indicates the the associated nodelist should be
+ * count goes to 0, this indicates that the associated nodelist should be
* freed. Returning 1 indicates the ndlp resource has been released; on the
* other hand, returning 0 indicates the ndlp resource has not been released
* yet.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0b2c53af85c7..015cc6f07dff 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3917,7 +3917,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelevant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 06241f590c1e..f1666cdcb02c 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2265,7 +2265,7 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * that the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 207a43d952fa..94826050e89e 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -16743,7 +16743,7 @@ out:
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 96dcc097a463..bea660c7fba6 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3220,7 +3220,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when HBA driver received the identify done event or initiate FIS received
* event(for SATA), it will invoke this function to notify the sas layer that
- * the sas toplogy has formed, please discover the the whole sas domain,
+ * the sas toplogy has formed, please discover the whole sas domain,
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 54fb984a3e17..87d239240463 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -354,7 +354,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
{
/*
* On all 4xx PPC's the SPI bus is shared/multiplexed with
- * the 2nd I2C bus. We need to enable the the SPI bus before
+ * the 2nd I2C bus. We need to enable the SPI bus before
* using it.
*/
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index d401dbf4c7c6..6db362a23ca3 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -921,7 +921,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
int i;
struct ieee80211_rxb *rxb = NULL;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8723au/core/rtw_cmd.c b/drivers/staging/rtl8723au/core/rtw_cmd.c
index 2447a56df838..97d4e940f2b0 100644
--- a/drivers/staging/rtl8723au/core/rtw_cmd.c
+++ b/drivers/staging/rtl8723au/core/rtw_cmd.c
@@ -509,7 +509,7 @@ int rtw_joinbss_cmd23a(struct rtw_adapter *padapter,
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the
+ /* If the driver wants to use the bssid to create the
* connection. If not, we have to copy the connecting AP's
* MAC address to it so that the driver just has the bssid
* information for PMKIDList searching. */
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 75cbde1f7c5b..caa782ca2456 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -409,7 +409,7 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
} else {
/*
* Extract the RELATIVE TARGET PORT IDENTIFIER to identify
- * the Target Port in question for the the incoming
+ * the Target Port in question for the incoming
* SET_TARGET_PORT_GROUPS op.
*/
rtpi = get_unaligned_be16(ptr + 2);
diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h
index ba87d6e731dd..1a4ba247f160 100644
--- a/drivers/thunderbolt/ctl.h
+++ b/drivers/thunderbolt/ctl.h
@@ -44,7 +44,7 @@ struct tb_cfg_result {
* If err = 1 then this is the port that send the
* error.
* If err = 0 and if this was a cfg_read/write then
- * this is the the upstream port of the responding
+ * this is the upstream port of the responding
* switch.
* Otherwise the field is set to zero.
*/
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index a98833cbfcf3..4d0df064684f 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -314,8 +314,7 @@ static const int hrsl_to_error[] = {
/*
* See http://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a
- * reasonable overview of how control transfers use the the IN/OUT
- * tokens.
+ * reasonable overview of how control transfers use the IN/OUT tokens.
*/
#define MAX3421_HXFR_BULK_IN(ep) (0x00 | (ep)) /* bulk or interrupt */
#define MAX3421_HXFR_SETUP 0x10
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 73485fa4372f..bad2191fbd26 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1610,7 +1610,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
- * RExit to a disconnect state). If so, let the the driver know it's
+ * RExit to a disconnect state). If so, let the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED(temp) &&
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 01bf53392819..1b99a08ca2de 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -261,7 +261,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
* Cypress app note that describes this mechanism
- * states the the low-speed part can't handle more
+ * states that the low-speed part can't handle more
* than 800 bytes/sec, in which case 4800 baud is the
* safest speed for a part like that.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 4f70df33975a..fe5e40b8141a 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -429,7 +429,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
}
/*
- * This is the the common top part of all parallel port callback operations that
+ * This is the common top part of all parallel port callback operations that
* send synchronous messages to the device. This implements convoluted locking
* that avoids two scenarios: (1) a port operation is called after usbserial
* has called our release function, at which point struct mos7715_parport has
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 3f4f5fbded55..fe4447f3f2ea 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -46,7 +46,7 @@
*
* ASSUMPTIONS:
*
- * - We use the the as device address the port number where it is
+ * - We use as device address the port number where it is
* connected (port 0 doesn't exist). For unauth, it is 128 + that.
*
* ROADMAP:
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
index b7d4f6b75eef..caa4cb40334d 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/uwb/drp-ie.c
@@ -262,7 +262,7 @@ int uwb_drp_ie_update(struct uwb_rsv *rsv)
* We are given a zone id and the MAS bitmap of bits that need to be set in
* this zone. Note that this zone may already have bits set and this only
* adds settings - we cannot simply assign the MAS bitmap contents to the
- * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * zone contents. We iterate over the bits (MAS) in the zone and set the
* bits that are set in the given MAS bitmap.
*/
static
diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
index d4e7684e7045..501bc08dc125 100644
--- a/drivers/video/fbdev/omap/sossi.c
+++ b/drivers/video/fbdev/omap/sossi.c
@@ -370,7 +370,7 @@ static void sossi_set_bits_per_cycle(int bpc)
int bus_pick_count, bus_pick_width;
/*
- * We set explicitly the the bus_pick_count as well, although
+ * We set explicitly the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
diff --git a/drivers/video/fbdev/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c
index ceb434c95c0d..9177b8056356 100644
--- a/drivers/video/fbdev/sis/sis_accel.c
+++ b/drivers/video/fbdev/sis/sis_accel.c
@@ -215,7 +215,7 @@ SiS310SubsequentScreenToScreenCopy(struct sis_video_info *ivideo, int src_x, int
* and destination blitting areas overlap and
* adapt the bitmap addresses synchronously
* if the coordinates exceed the valid range.
- * The the areas do not overlap, we do our
+ * If the areas do not overlap, we do our
* normal check.
*/
if((mymax - mymin) < height) {
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index ac7d921ed984..b3179b482529 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -511,7 +511,7 @@ static int autofs_dev_ioctl_askumount(struct file *fp,
* located path is the root of a mount we return 1 along with
* the super magic of the mount or 0 otherwise.
*
- * In both cases the the device number (as returned by
+ * In both cases the device number (as returned by
* new_encode_dev()) is also returned.
*/
static int autofs_dev_ioctl_ismountpoint(struct file *fp,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index 5ec03d999c37..b7173d53ca8b 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -854,7 +854,7 @@ int btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace)
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
- * not called and the the filesystem is remounted
+ * not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancelation is wanted.
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index d6033f540cc7..141ab13a538c 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -3555,7 +3555,7 @@ verbose_printk("btrfs: process_recorded_refs %llu\n", sctx->cur_ino);
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
- * the the current inum. To handle this case, we create the
+ * than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index c5b8ba37f88e..8f22f791cff9 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2710,7 +2710,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
mutex_unlock(&log_root_tree->log_mutex);
/*
- * nobody else is going to jump in and write the the ctree
+ * nobody else is going to jump in and write the ctree
* super here because the log_commit atomic below is protecting
* us. We must be called with a transaction handle pinning
* the running transaction open, so a full commit can't hop
diff --git a/fs/dcache.c b/fs/dcache.c
index c71e3732e53b..215f9c5db3a3 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -2011,8 +2011,8 @@ EXPORT_SYMBOL(d_obtain_root);
* same inode, only the actual correct case is stored in the dcache for
* case-insensitive filesystems.
*
- * For a case-insensitive lookup match and if the the case-exact dentry
- * already exists in in the dcache, use it and return it.
+ * For a case-insensitive lookup match and if the case-exact dentry
+ * already exists in the dcache, use it and return it.
*
* If no entry exists with the exact case name, allocate new dentry with
* the exact case, and return the spliced entry.
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 6bd67e2011f0..70a39a6e0bc7 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -899,7 +899,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack {
* @filename: This function kmalloc's the memory for the filename
* @filename_size: This function sets this to the amount of memory
* kmalloc'd for the filename
- * @packet_size: This function sets this to the the number of octets
+ * @packet_size: This function sets this to the number of octets
* in the packet parsed
* @mount_crypt_stat: The mount-wide cryptographic context
* @data: The memory location containing the start of the tag 70
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index 678f9ab08c48..4d5173e2051a 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -51,7 +51,7 @@ struct ext2_block_alloc_info {
/*
* Was i_next_alloc_goal in ext2_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it is the physical block number of the block which was most-recently
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index 4b143febf21f..79a4f7bef77e 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -271,7 +271,7 @@ static int ext4_create_inline_data(handle_t *handle,
len = 0;
}
- /* Insert the the xttr entry. */
+ /* Insert the xttr entry. */
i.value = value;
i.value_len = len;
@@ -834,7 +834,7 @@ out:
/*
* Prepare the write for the inline data.
- * If the the data can be written into the inode, we just read
+ * If the data can be written into the inode, we just read
* the page and make it uptodate, and start the journal.
* Otherwise read the page, makes it dirty so that it can be
* handle in writepages(the i_disksize update is left to the
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index 7fd35111cf62..358511fa1285 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -158,7 +158,7 @@ struct seg_entry {
unsigned short valid_blocks; /* # of valid blocks */
unsigned char *cur_valid_map; /* validity bitmap of blocks */
/*
- * # of valid blocks and the validity bitmap stored in the the last
+ * # of valid blocks and the validity bitmap stored in the last
* checkpoint pack. This information is used by the SSR mode.
*/
unsigned short ckpt_valid_blocks;
diff --git a/fs/kernfs/file.c b/fs/kernfs/file.c
index 2bacb9988566..5a46b04f071a 100644
--- a/fs/kernfs/file.c
+++ b/fs/kernfs/file.c
@@ -264,7 +264,7 @@ static ssize_t kernfs_fop_read(struct file *file, char __user *user_buf,
* There is no easy way for us to know if userspace is only doing a partial
* write, so we don't support them. We expect the entire buffer to come on
* the first write. Hint: if you're writing a value, first read the file,
- * modify only the the value you're changing, then write entire buffer
+ * modify only the value you're changing, then write entire buffer
* back.
*/
static ssize_t kernfs_fop_write(struct file *file, const char __user *user_buf,
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 044013455621..c0aa12bdb106 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -690,7 +690,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb,
/*
* Under certain conditions, the window slide code
* might have reduced the number of bits available or
- * disabled the the local alloc entirely. Re-check
+ * disabled the local alloc entirely. Re-check
* here and return -ENOSPC if necessary.
*/
status = -ENOSPC;
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index b97359ba2648..e05c80d4705d 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -71,7 +71,7 @@ xfs_fs_encode_fh(
fileid_type = FILEID_INO32_GEN_PARENT;
/*
- * If the the filesystem may contain 64bit inode numbers, we need
+ * If the filesystem may contain 64bit inode numbers, we need
* to use larger file handles that can represent them.
*
* While we only allocate inodes that do not fit into 32 bits any
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index 26bb55e9e8b6..37cdb83e1e24 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -120,7 +120,7 @@ static inline int drm_rect_height(const struct drm_rect *r)
}
/**
- * drm_rect_visible - determine if the the rectangle is visible
+ * drm_rect_visible - determine if the rectangle is visible
* @r: rectangle whose visibility is returned
*
* RETURNS:
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index b9c7897dc566..c871164f6c89 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -2056,7 +2056,7 @@ enum ieee80211_tdls_actioncode {
*/
#define WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING BIT(2)
-/* TDLS capabilities in the the 4th byte of @WLAN_EID_EXT_CAPABILITY */
+/* TDLS capabilities in the 4th byte of @WLAN_EID_EXT_CAPABILITY */
#define WLAN_EXT_CAPA4_TDLS_BUFFER_STA BIT(4)
#define WLAN_EXT_CAPA4_TDLS_PEER_PSM BIT(5)
#define WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH BIT(6)
diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h
index d5b5f76d57ef..91c32b80c6d1 100644
--- a/include/linux/mic_bus.h
+++ b/include/linux/mic_bus.h
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ include/linux/virtio.h.
*/
#ifndef _MIC_BUS_H_
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 47a93928b90f..9d0916bf5320 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -213,7 +213,7 @@ extern pgprot_t protection_map[16];
#define FAULT_FLAG_USER 0x40 /* The fault originated in userspace */
/*
- * vm_fault is filled by the the pagefault handler and passed to the vma's
+ * vm_fault is filled by the pagefault handler and passed to the vma's
* ->fault function. The vma's ->fault is responsible for returning a bitmask
* of VM_FAULT_xxx flags that give details about how the fault was handled.
*
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 1c9effa25e26..85a8edc122bf 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -106,7 +106,7 @@ struct kparam_array
* ".") the kernel commandline parameter. Note that - is changed to _, so
* the user can use "foo-bar=1" even for variable "foo_bar".
*
- * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * @perm is 0 if the variable is not to appear in sysfs, or 0444
* for world-readable, 0644 for root-writable, etc. Note that if it
* is writable, you may need to use kparam_block_sysfs_write() around
* accesses (esp. charp, which can be kfreed when it changes).
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index f54d6659713a..c7b908411527 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2862,7 +2862,7 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
* must call this function to return the skb back to the stack, with
* or without a timestamp.
*
- * @skb: clone of the the original outgoing packet
+ * @skb: clone of the original outgoing packet
* @hwtstamps: hardware time stamps, may be NULL if not available
*
*/
diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h
index 94e5ed64dc6d..e9a8d524ab06 100644
--- a/include/net/caif/caif_layer.h
+++ b/include/net/caif/caif_layer.h
@@ -184,7 +184,7 @@ struct cflayer {
* CAIF packet downwards in the stack.
* Packet handling rules:
* - The CAIF packet (cfpkt) ownership is passed to the
- * transmit function. This means that the the packet
+ * transmit function. This means that the packet
* cannot be accessed after passing it to the below
* layer using dn->transmit().
*
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 20e80fa7bbdd..a99fdfcc894d 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -105,7 +105,7 @@ struct rt6_info {
struct in6_addr rt6i_gateway;
/* Multipath routes:
- * siblings is a list of rt6_info that have the the same metric/weight,
+ * siblings is a list of rt6_info that have the same metric/weight,
* destination, but not the same gateway. nsiblings is just a cache
* to speed up lookup.
*/
diff --git a/include/net/wimax.h b/include/net/wimax.h
index c52b68577cb0..c9705a3eb3b7 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -43,7 +43,7 @@
*
* USAGE
*
- * Embed a `struct wimax_dev` at the beginning of the the device's
+ * Embed a `struct wimax_dev` at the beginning of the device's
* private structure, initialize and register it. For details, see
* `struct wimax_dev`s documentation.
*
diff --git a/include/uapi/asm-generic/fcntl.h b/include/uapi/asm-generic/fcntl.h
index e063effe0cc1..04616a36f82a 100644
--- a/include/uapi/asm-generic/fcntl.h
+++ b/include/uapi/asm-generic/fcntl.h
@@ -142,7 +142,7 @@
* record locks, but are "owned" by the open file description, not the
* process. This means that they are inherited across fork() like BSD (flock)
* locks, and they are only released automatically when the last reference to
- * the the open file against which they were acquired is put.
+ * the open file against which they were acquired is put.
*/
#define F_OFD_GETLK 36
#define F_OFD_SETLK 37
diff --git a/include/uapi/linux/android/binder.h b/include/uapi/linux/android/binder.h
index 41420e341e75..92d7f52ddb10 100644
--- a/include/uapi/linux/android/binder.h
+++ b/include/uapi/linux/android/binder.h
@@ -266,7 +266,7 @@ enum binder_driver_return_protocol {
BR_FAILED_REPLY = _IO('r', 17),
/*
- * The the last transaction (either a bcTRANSACTION or
+ * The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
};
diff --git a/init/Kconfig b/init/Kconfig
index f5dbc6d4261b..70c23e6f1ea4 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -861,8 +861,8 @@ config LOG_CPU_MAX_BUF_SHIFT
used as it forces an exact (power of two) size of the ring buffer.
The number of possible CPUs is used for this computation ignoring
- hotplugging making the compuation optimal for the the worst case
- scenerio while allowing a simple algorithm to be used from bootup.
+ hotplugging making the computation optimal for the worst case
+ scenario while allowing a simple algorithm to be used from bootup.
Examples shift values and their meaning:
17 => 128 KB for each CPU
diff --git a/init/main.c b/init/main.c
index 6f0f1c5ff8cc..a0bb4ac95592 100644
--- a/init/main.c
+++ b/init/main.c
@@ -501,7 +501,7 @@ asmlinkage __visible void __init start_kernel(void)
debug_objects_early_init();
/*
- * Set up the the initial canary ASAP:
+ * Set up the initial canary ASAP:
*/
boot_init_stack_canary();
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 9019f15deab2..6e82ca9e2735 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -17,7 +17,7 @@
#ifdef HAVE_JUMP_LABEL
-/* mutex to protect coming/going of the the jump_label table */
+/* mutex to protect coming/going of the jump_label table */
static DEFINE_MUTEX(jump_label_mutex);
void jump_label_lock(void)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index bb0635bd74f2..2a1ea3c18eca 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2897,7 +2897,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
- * with as many of the the *youngest* kmsg records that fit into it.
+ * with as many of the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
diff --git a/kernel/smp.c b/kernel/smp.c
index f38a1e692259..2a2865ab3ec6 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -623,7 +623,7 @@ EXPORT_SYMBOL(on_each_cpu_mask);
* for all the required CPUs to finish. This may include the local
* processor.
* @cond_func: A callback function that is passed a cpu id and
- * the the info parameter. The function is called
+ * the info parameter. The function is called
* with preemption disabled. The function should
* return a blooean value indicating whether to IPI
* the specified CPU.
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 5040d44fe5a3..a96cf7a91325 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2933,7 +2933,7 @@ rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
* This function lets the user discard an event in the ring buffer
* and then that event will not be read later.
*
- * This function only works if it is called before the the item has been
+ * This function only works if it is called before the item has been
* committed. It will try to free the event from the ring buffer
* if another event has not been added behind it.
*
diff --git a/lib/dynamic_queue_limits.c b/lib/dynamic_queue_limits.c
index f346715e2255..3b9f82164f7d 100644
--- a/lib/dynamic_queue_limits.c
+++ b/lib/dynamic_queue_limits.c
@@ -60,7 +60,7 @@ void dql_completed(struct dql *dql, unsigned int count)
* the whole interval (the check above).
*
* If there is slack, the amount of execess data queued above
- * the the amount needed to prevent starvation, the queue limit
+ * the amount needed to prevent starvation, the queue limit
* can be decreased. To avoid hysteresis we consider the
* minimum amount of slack found over several iterations of the
* completion routine.
diff --git a/lib/earlycpio.c b/lib/earlycpio.c
index 3eb3e4722b8e..9d4da0a6a6ed 100644
--- a/lib/earlycpio.c
+++ b/lib/earlycpio.c
@@ -50,7 +50,7 @@ enum cpio_fields {
/**
* cpio_data find_cpio_data - Search for files in an uncompressed cpio
* @path: The directory to search for, including a slash at the end
- * @data: Pointer to the the cpio archive or a header inside
+ * @data: Pointer to the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @nextoff: When a matching file is found, this is the offset from the
* beginning of the cpio to the beginning of the next file, not the
diff --git a/lib/syscall.c b/lib/syscall.c
index e30e03932480..624d80430969 100644
--- a/lib/syscall.c
+++ b/lib/syscall.c
@@ -31,7 +31,7 @@ static int collect_syscall(struct task_struct *target, long *callno,
* @pc: filled with user PC
*
* If @target is blocked in a system call, returns zero with *@callno
- * set to the the call's number and @args filled in with its arguments.
+ * set to the call's number and @args filled in with its arguments.
* Registers not used for system call arguments may not be available and
* it is not kosher to use &struct user_regset calls while the system
* call is still in progress. Note we may get this result if @target
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index c41b2a0ee273..7fcd19c43c05 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1310,7 +1310,7 @@ static void return_unused_surplus_pages(struct hstate *h,
* evenly across all nodes with memory. Iterate across these nodes
* until we can no longer free unreserved surplus pages. This occurs
* when the nodes with surplus pages have no free pages.
- * free_pool_huge_page() will balance the the freed pages across the
+ * free_pool_huge_page() will balance the freed pages across the
* on-line nodes with memory and will handle the hstate accounting.
*/
while (nr_pages--) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 40e29429e7b0..a2a5857ef502 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4251,7 +4251,7 @@ static int zone_batchsize(struct zone *zone)
* locking.
*
* Any new users of pcp->batch and pcp->high should ensure they can cope with
- * those fields changing asynchronously (acording the the above rule).
+ * those fields changing asynchronously (according to the above rule).
*
* mutex_is_locked(&pcp_batch_high_lock) required when calling this function
* outside of boot time (or some other assurance that no concurrent updaters
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index c9b8fa544785..2658d6089f70 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -981,7 +981,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
return 0;
}
-/* Encrypt the the link */
+/* Encrypt the link */
static void hci_conn_encrypt(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 3322d3f4c85a..ed06d9b4fac0 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -835,7 +835,7 @@ static void hci_init4_req(struct hci_request *req, unsigned long opt)
* Delete Stored Link Key command. They are clearly indicating its
* absence in the bit mask of supported commands.
*
- * Check the supported commands and only if the the command is marked
+ * Check the supported commands and only if the command is marked
* as supported send it. If not supported assume that the controller
* does not have actual support for stored link keys which makes this
* command redundant anyway.
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 238f38d21641..6cd9ec0eed47 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -146,7 +146,7 @@ int eth_rebuild_header(struct sk_buff *skb)
EXPORT_SYMBOL(eth_rebuild_header);
/**
- * eth_get_headlen - determine the the length of header for an ethernet frame
+ * eth_get_headlen - determine the length of header for an ethernet frame
* @data: pointer to start of frame
* @len: total length of frame
*
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 197c3f59ecbf..545f842eb4ab 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1347,7 +1347,7 @@ static void sctp_select_active_and_retran_path(struct sctp_association *asoc)
}
/* We did not find anything useful for a possible retransmission
- * path; either primary path that we found is the the same as
+ * path; either primary path that we found is the same as
* the current one, or we didn't generally find an active one.
*/
if (trans_sec == NULL)
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index a3380917f197..a31060a7f3cc 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -200,7 +200,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3;
max = asoc->frag_point;
- /* If the the peer requested that we authenticate DATA chunks
+ /* If the peer requested that we authenticate DATA chunks
* we need to account for bundling of the AUTH chunks along with
* DATA.
*/
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 41248b1820c7..507ee9d91bd1 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -190,7 +190,7 @@ void rpc_destroy_generic_auth(void)
}
/*
- * Test the the current time (now) against the underlying credential key expiry
+ * Test the current time (now) against the underlying credential key expiry
* minus a timeout and setup notification.
*
* The normal case:
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 7d730543f243..53d5e7a8753b 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
* @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
* %WIMAX_RF_OFF radio off.
*
- * Reports changes in the software RF switch state to the the WiMAX
+ * Reports changes in the software RF switch state to the WiMAX
* stack.
*
* The main use is during initialization, so the driver can query the
diff --git a/scripts/coccinelle/misc/badty.cocci b/scripts/coccinelle/misc/badty.cocci
index 2fc06fc71927..7bde383f577b 100644
--- a/scripts/coccinelle/misc/badty.cocci
+++ b/scripts/coccinelle/misc/badty.cocci
@@ -3,7 +3,7 @@
//# This makes an effort to find cases where the argument to sizeof is wrong
//# in memory allocation functions by checking the type of the allocated memory
//# when it is a double pointer and ensuring the sizeof argument takes a pointer
-//# to the the memory being allocated. There are false positives in cases the
+//# to the memory being allocated. There are false positives in cases the
//# sizeof argument is not used in constructing the return value. The result
//# may need some reformatting.
//
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index db40fa04cd51..9eb8c74b69a1 100755
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in
kernel/trace/trace_functions.c
The resulted trace is processed into a tree to produce a more human
view of the call stack by drawing textual but hierarchical tree of
-calls. Only the functions's names and the the call time are provided.
+calls. Only the functions's names and the call time are provided.
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
index 3064c6ced87c..7b9769e7985a 100644
--- a/security/apparmor/context.c
+++ b/security/apparmor/context.c
@@ -13,7 +13,7 @@
* License.
*
*
- * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * AppArmor sets confinement on every task, via the aa_task_cxt and
* the aa_task_cxt.profile, both of which are required and are not allowed
* to be NULL. The aa_task_cxt is not reference counted and is unique
* to each cred (which is reference count). The profile pointed to by
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 4743d71e4aa6..5d2686fba107 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -478,7 +478,7 @@ error:
* keyring, otherwise replace the link to the matching key with a link to the
* new key.
*
- * The key must grant the caller Link permission and the the keyring must grant
+ * The key must grant the caller Link permission and the keyring must grant
* the caller Write permission. Furthermore, if an additional link is created,
* the keyring's quota will be extended.
*
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 2fe86d2e1b09..28078d7004da 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -5158,7 +5158,7 @@ EXPORT_SYMBOL_GPL(snd_hda_power_save);
* @nid: NID to check / update
*
* Check whether the given NID is in the amp list. If it's in the list,
- * check the current AMP status, and update the the power-status according
+ * check the current AMP status, and update the power-status according
* to the mute status.
*
* This function is supposed to be set or called from the check_power_status
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 87eff3173ce9..5dbd4c73c862 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -857,7 +857,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec,
static struct snd_kcontrol_new beep_vol_ctl =
HDA_CODEC_VOLUME(NULL, 0, 0, 0);
- /* check for mute support for the the amp */
+ /* check for mute support for the amp */
if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
const struct snd_kcontrol_new *temp;
if (spec->anabeep_nid == nid)
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index 3919aed39ca0..5e52086d7b98 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -31,7 +31,7 @@
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
- * sampling rate. That means the the FPGA doubles the
+ * sampling rate. That means that the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index 79552953e1bd..ec5624bf1e13 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -725,7 +725,7 @@ static void pll_factors(struct snd_soc_codec *codec,
u64 Kpart;
unsigned int K, Ndiv, Nmod, target;
- /* The the PLL output is always 98.304MHz. */
+ /* The PLL output is always 98.304MHz. */
target = 98304000;
/* If the input frequency is over 14.4MHz then scale it down. */
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index 93d7e56c6066..37100b38b377 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -157,7 +157,7 @@ static void fsl_dma_abort_stream(struct snd_pcm_substream *substream)
/**
* fsl_dma_update_pointers - update LD pointers to point to the next period
*
- * As each period is completed, this function changes the the link
+ * As each period is completed, this function changes the link
* descriptor pointers for that period to point to the next period.
*/
static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private)
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index 0190cb6332f2..635b5cc6b56d 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -615,7 +615,7 @@ A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. The DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index e463caa3eb49..501d00446568 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -196,7 +196,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
- period being the hist entry period value
- - WEIGHT-A/WEIGHT-B being user supplied weights in the the '-c' option
+ - WEIGHT-A/WEIGHT-B being user supplied weights in the '-c' option
behind ':' separator like '-c wdiff:1,2'.
- WEIGHT-A being the weight of the data file
- WEIGHT-B being the weight of the baseline data file
diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
index fd7e9e9d6f4a..1aa7faa0e0e0 100644
--- a/tools/thermal/tmon/pid.c
+++ b/tools/thermal/tmon/pid.c
@@ -38,7 +38,7 @@
/**************************************************************************
* PID (Proportional-Integral-Derivative) controller is commonly used in
- * linear control system, consider the the process.
+ * linear control system, consider the process.
* G(s) = U(s)/E(s)
* kp = proportional gain
* ki = integral gain
--
2.1.0
^ permalink raw reply related [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2015-03-27 2:16 ` Michael Opdenacker
@ 2015-03-27 9:34 ` Jiri Kosina
2015-04-20 4:55 ` Michael Opdenacker
0 siblings, 1 reply; 35+ messages in thread
From: Jiri Kosina @ 2015-03-27 9:34 UTC (permalink / raw)
To: Michael Opdenacker
Cc: edubezval, rdunlap, joe, akpm, arend, gregkh, torvalds, linux-kernel
On Thu, 26 Mar 2015, Michael Opdenacker wrote:
> > 222 files changed, 493 insertions(+), 258 deletions(-)
>
> Is this patch getting too big (and getting bigger and bigger) to be ever
> merged?
>
> Unless you tell me otherwise, I'm thinking about splitting it into
> several patches, one for each subsystem. That would unnecessarily
> increase the number of commits for the same thing, what else can we do?
Quite frankly, this is quite painful (compared to the "importance" of the
patch) to maintain over several months in trivial.git, because it's going
to get conflicts to no good avail all over the place over time.
I think the best thing to do is to send patches like this directly to
Linus at the end of merge window and see if he's willing to accept it or
not.
Thanks,
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2015-03-27 9:34 ` Jiri Kosina
@ 2015-04-20 4:55 ` Michael Opdenacker
2015-04-20 5:02 ` Michael Opdenacker
0 siblings, 1 reply; 35+ messages in thread
From: Michael Opdenacker @ 2015-04-20 4:55 UTC (permalink / raw)
To: Jiri Kosina
Cc: edubezval, rdunlap, joe, akpm, arend, gregkh, torvalds, linux-kernel
Hi Jiri,
On 03/27/2015 10:34 AM, Jiri Kosina wrote:
> On Thu, 26 Mar 2015, Michael Opdenacker wrote:
>
>>> 222 files changed, 493 insertions(+), 258 deletions(-)
>> Is this patch getting too big (and getting bigger and bigger) to be ever
>> merged?
>>
>> Unless you tell me otherwise, I'm thinking about splitting it into
>> several patches, one for each subsystem. That would unnecessarily
>> increase the number of commits for the same thing, what else can we do?
> Quite frankly, this is quite painful (compared to the "importance" of the
> patch) to maintain over several months in trivial.git, because it's going
> to get conflicts to no good avail all over the place over time.
>
> I think the best thing to do is to send patches like this directly to
> Linus at the end of merge window and see if he's willing to accept it or
> not.
Thanks for the sound advice.
Linus, as we are getting closer to the end of the merge window, here's a
patch (in my next e-mail) against your current tree removing many
occurrences of "the the " in the kernel source code. I hope you can
merge it at this stage. This way we will just have one commit in the
tree instead of many more if I had to go through multiple maintainers.
Thanks in advance,
Michael.
--
Michael Opdenacker, CEO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
+33 484 258 098
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the "
2015-04-20 4:55 ` Michael Opdenacker
@ 2015-04-20 5:02 ` Michael Opdenacker
0 siblings, 0 replies; 35+ messages in thread
From: Michael Opdenacker @ 2015-04-20 5:02 UTC (permalink / raw)
To: torvalds, jkosina
Cc: edubezval, rdunlap, joe, akpm, arend, gregkh, linux-kernel,
Michael Opdenacker
Fix all occurrences of "the the ", and occasionally "in in ",
in the source code, comments and documentation.
The replacement couldn't be automated because sometimes
the first "the" was meant to be another word.
Example: "according the the"
meaning: "according to the"
Note that I sometimes took the opportunity to fix
other spelling issues or typos in the same sentences,
and to reformat some comments impacted by the changes.
I also fixed a few checkpatch errors in the same
lines, but not all of them (should be addressed by
separate patches).
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Reviewed-by: rdunlap@infradead.org
Acked-by: Eduardo Valentin <edubezval@gmail.com>
---
Documentation/ABI/testing/sysfs-class-cxl | 4 ++--
Documentation/ABI/testing/sysfs-devices-memory | 2 +-
Documentation/ABI/testing/sysfs-devices-soc | 2 +-
Documentation/ABI/testing/sysfs-wusb_cbaf | 2 +-
Documentation/DocBook/crypto-API.tmpl | 2 +-
Documentation/DocBook/media/v4l/controls.xml | 2 +-
Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +-
Documentation/PCI/pci-error-recovery.txt | 4 ++--
Documentation/devicetree/bindings/arm/arm-boards | 2 +-
.../devicetree/bindings/power/rockchip-io-domain.txt | 2 +-
Documentation/filesystems/autofs4-mount-control.txt | 4 ++--
Documentation/filesystems/overlayfs.txt | 2 +-
Documentation/filesystems/sysfs-tagging.txt | 2 +-
Documentation/hwmon/lm93 | 2 +-
Documentation/i2c/dev-interface | 2 +-
Documentation/kernel-parameters.txt | 2 +-
Documentation/networking/rxrpc.txt | 2 +-
Documentation/networking/vxlan.txt | 2 +-
Documentation/phy.txt | 2 +-
Documentation/sysfs-rules.txt | 4 ++--
Documentation/vm/ksm.txt | 2 +-
Documentation/vm/unevictable-lru.txt | 2 +-
Documentation/xillybus.txt | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/unwind.h | 2 +-
arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
arch/arm/mach-pxa/stargate2.c | 2 +-
arch/arm64/crypto/aes-neon.S | 2 +-
arch/blackfin/mach-common/entry.S | 2 +-
arch/c6x/platforms/cache.c | 2 +-
arch/ia64/include/asm/spinlock.h | 2 +-
arch/ia64/include/asm/uv/uv_hub.h | 2 +-
arch/m68k/coldfire/intc-2.c | 2 +-
arch/metag/kernel/process.c | 2 +-
arch/microblaze/kernel/entry.S | 2 +-
arch/mips/alchemy/devboards/pm.c | 2 +-
arch/mips/cavium-octeon/Kconfig | 2 +-
arch/mips/include/asm/octeon/cvmx-pip.h | 2 +-
arch/mips/include/asm/spinlock.h | 2 +-
arch/mips/kvm/mips.c | 2 +-
arch/mips/mm/c-octeon.c | 4 ++--
arch/mips/netlogic/xlr/fmn.c | 2 +-
arch/powerpc/include/asm/cache.h | 2 +-
arch/powerpc/include/asm/epapr_hcalls.h | 2 +-
arch/powerpc/include/asm/hw_breakpoint.h | 2 +-
arch/powerpc/kernel/head_64.S | 2 +-
arch/powerpc/mm/hugetlbpage.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/platforms/chrp/setup.c | 2 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
arch/powerpc/xmon/xmon.c | 2 +-
arch/s390/kernel/perf_cpum_sf.c | 2 +-
arch/s390/mm/gup.c | 2 +-
arch/sparc/kernel/pci.c | 2 +-
arch/sparc/mm/gup.c | 2 +-
arch/tile/Kconfig | 2 +-
arch/tile/include/asm/irqflags.h | 2 +-
arch/tile/include/gxio/trio.h | 2 +-
arch/tile/kernel/single_step.c | 2 +-
arch/x86/Kconfig | 2 +-
arch/x86/include/asm/spinlock.h | 2 +-
arch/x86/include/asm/uv/uv_hub.h | 2 +-
arch/x86/kernel/cpu/perf_event_intel_cqm.c | 2 +-
arch/x86/kvm/x86.c | 2 +-
arch/x86/mm/gup.c | 4 ++--
arch/x86/platform/efi/efi_thunk_64.S | 2 +-
arch/x86/xen/setup.c | 2 +-
arch/xtensa/include/asm/initialize_mmu.h | 2 +-
arch/xtensa/kernel/entry.S | 12 ++++++------
crypto/asymmetric_keys/pkcs7_parser.h | 2 +-
drivers/acpi/acpica/accommon.h | 2 +-
drivers/acpi/acpica/tbfadt.c | 2 +-
drivers/char/apm-emulation.c | 2 +-
drivers/char/xilinx_hwicap/fifo_icap.c | 2 +-
drivers/cpuidle/driver.c | 2 +-
drivers/crypto/picoxcell_crypto.c | 2 +-
drivers/crypto/ux500/hash/hash_core.c | 2 +-
drivers/firmware/efi/runtime-wrappers.c | 2 +-
drivers/gpio/gpio-ich.c | 2 +-
drivers/gpio/gpio-sch.c | 2 +-
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h | 2 +-
drivers/gpu/drm/drm_crtc.c | 2 +-
drivers/gpu/drm/drm_mm.c | 4 ++--
drivers/gpu/drm/i915/i915_gem.c | 2 +-
drivers/gpu/drm/i915/i915_gem_userptr.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 4 ++--
drivers/gpu/drm/radeon/atombios.h | 4 ++--
drivers/gpu/drm/radeon/r300_reg.h | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 2 +-
drivers/gpu/drm/radeon/radeon_fence.c | 2 +-
drivers/gpu/drm/radeon/radeon_vm.c | 4 ++--
drivers/hv/channel.c | 4 ++--
drivers/hv/vmbus_drv.c | 4 ++--
drivers/hwmon/pmbus/ucd9200.c | 2 +-
drivers/infiniband/hw/ipath/ipath_common.h | 2 +-
drivers/infiniband/hw/qib/qib.h | 2 +-
drivers/input/mouse/gpio_mouse.c | 2 +-
drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +-
drivers/lguest/core.c | 2 +-
drivers/media/dvb-frontends/tda1002x.h | 2 +-
drivers/media/dvb-frontends/tda10048.c | 2 +-
drivers/media/pci/cx88/cx88-dsp.c | 2 +-
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/saa7164/saa7164-core.c | 2 +-
drivers/media/platform/davinci/vpbe.c | 2 +-
drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
drivers/media/usb/dvb-usb/friio.c | 2 +-
drivers/media/usb/dvb-usb/friio.h | 2 +-
drivers/media/usb/gspca/finepix.c | 2 +-
drivers/media/usb/tm6000/tm6000-cards.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 2 +-
drivers/memory/emif.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/mfd/db8500-prcmu.c | 2 +-
drivers/misc/mic/bus/mic_bus.c | 2 +-
drivers/misc/sgi-gru/grukservices.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
drivers/mmc/host/dw_mmc.c | 2 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/ubi/ubi.h | 4 ++--
drivers/mtd/ubi/wl.c | 2 +-
drivers/net/can/xilinx_can.c | 2 +-
drivers/net/ethernet/agere/et131x.c | 2 +-
drivers/net/ethernet/calxeda/xgmac.c | 2 +-
drivers/net/ethernet/emulex/benet/be_main.c | 2 +-
drivers/net/ethernet/fujitsu/Kconfig | 2 +-
drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +-
drivers/net/ethernet/intel/fm10k/fm10k_mbx.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
drivers/net/ethernet/neterion/s2io.c | 2 +-
drivers/net/ethernet/rdc/Kconfig | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +-
drivers/net/wimax/i2400m/i2400m.h | 4 ++--
drivers/net/wimax/i2400m/rx.c | 2 +-
drivers/net/wimax/i2400m/tx.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
drivers/net/wireless/ath/ath6kl/hif.h | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/wcn36xx/hal.h | 8 ++++----
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++--
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 2 +-
drivers/net/wireless/mwifiex/debugfs.c | 2 +-
drivers/net/wireless/mwifiex/sdio.c | 2 +-
drivers/net/wireless/rsi/rsi_91x_sdio.c | 4 ++--
drivers/net/wireless/ti/wl1251/acx.h | 2 +-
drivers/pci/hotplug/acpiphp_glue.c | 2 +-
drivers/pcmcia/pxa2xx_hx4700.c | 2 +-
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 2 +-
drivers/pinctrl/pinctrl-at91.c | 2 +-
drivers/power/power_supply_sysfs.c | 5 +++--
drivers/rtc/rtc-rs5c372.c | 2 +-
drivers/s390/net/qeth_core_main.c | 2 +-
drivers/scsi/aacraid/aachba.c | 2 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 6 +++---
drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++--
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/remote_device.h | 2 +-
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 8 ++++----
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++--
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/spi/spi-ppc4xx.c | 2 +-
drivers/staging/iio/magnetometer/hmc5843_core.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
drivers/staging/rtl8723au/core/rtw_cmd.c | 2 +-
drivers/target/target_core_alua.c | 2 +-
drivers/thunderbolt/ctl.h | 2 +-
drivers/tty/hvc/Kconfig | 2 +-
drivers/usb/host/max3421-hcd.c | 3 +--
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/mos7720.c | 2 +-
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/uwb/drp-ie.c | 2 +-
drivers/video/fbdev/omap/sossi.c | 2 +-
drivers/video/fbdev/sis/sis_accel.c | 2 +-
fs/autofs4/dev-ioctl.c | 2 +-
fs/btrfs/dev-replace.c | 2 +-
fs/btrfs/send.c | 2 +-
fs/btrfs/tree-log.c | 2 +-
fs/dcache.c | 4 ++--
fs/ecryptfs/keystore.c | 2 +-
fs/ext2/ext2.h | 2 +-
fs/ext4/inline.c | 4 ++--
fs/f2fs/segment.h | 2 +-
fs/kernfs/file.c | 2 +-
fs/ocfs2/localalloc.c | 2 +-
fs/xfs/xfs_export.c | 2 +-
include/drm/drm_rect.h | 2 +-
include/linux/ieee80211.h | 2 +-
include/linux/mic_bus.h | 2 +-
include/linux/mm.h | 2 +-
include/linux/moduleparam.h | 2 +-
include/linux/skbuff.h | 2 +-
include/media/v4l2-subdev.h | 4 ++--
include/net/caif/caif_layer.h | 2 +-
include/net/ip6_fib.h | 2 +-
include/net/wimax.h | 2 +-
include/uapi/asm-generic/fcntl.h | 2 +-
include/uapi/linux/android/binder.h | 2 +-
init/Kconfig | 4 ++--
init/main.c | 2 +-
kernel/jump_label.c | 2 +-
kernel/printk/printk.c | 2 +-
kernel/smp.c | 2 +-
kernel/time/timekeeping.c | 2 +-
kernel/trace/ring_buffer.c | 2 +-
lib/Kconfig.debug | 2 +-
lib/dynamic_queue_limits.c | 2 +-
lib/earlycpio.c | 2 +-
lib/syscall.c | 2 +-
mm/hugetlb.c | 2 +-
mm/page_alloc.c | 2 +-
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/hci_core.c | 2 +-
net/ethernet/eth.c | 2 +-
net/sctp/associola.c | 2 +-
net/sctp/chunk.c | 2 +-
net/sunrpc/auth_generic.c | 2 +-
net/wimax/op-rfkill.c | 2 +-
scripts/coccinelle/misc/badty.cocci | 2 +-
scripts/tracing/draw_functrace.py | 2 +-
security/apparmor/context.c | 2 +-
security/keys/keyctl.c | 2 +-
sound/pci/hda/hda_codec.c | 2 +-
sound/pci/hda/hda_generic.c | 2 +-
sound/pci/hda/patch_sigmatel.c | 2 +-
sound/pci/ice1712/prodigy192.c | 2 +-
sound/soc/codecs/wm9713.c | 2 +-
sound/soc/fsl/fsl_dma.c | 2 +-
sound/sparc/dbri.c | 2 +-
tools/perf/Documentation/perf-diff.txt | 2 +-
tools/thermal/tmon/pid.c | 2 +-
247 files changed, 286 insertions(+), 286 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index d46bba801aac..c2a3e2ed8bac 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -77,8 +77,8 @@ What: /sys/class/cxl/<afu>/api_version_compatible
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
- Decimal value of the the lowest version of the userspace API
- this this kernel supports.
+ Decimal value of the lowest version of the userspace API
+ this kernel supports.
AFU configuration records (eg. /sys/class/cxl/afu0.0/cr0):
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index deef3b5723cf..9767745b99bd 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -45,7 +45,7 @@ Description:
The file /sys/devices/system/memory/memoryX/state
is read-write. When read, its contents show the
online/offline state of the memory section. When written,
- root can toggle the the online/offline state of a removable
+ root can toggle the online/offline state of a removable
memory section (see removable file description above)
using the following commands.
# echo online > /sys/devices/system/memory/memoryX/state
diff --git a/Documentation/ABI/testing/sysfs-devices-soc b/Documentation/ABI/testing/sysfs-devices-soc
index 6d9cc253f2b2..331d8a12d506 100644
--- a/Documentation/ABI/testing/sysfs-devices-soc
+++ b/Documentation/ABI/testing/sysfs-devices-soc
@@ -44,7 +44,7 @@ What: /sys/devices/socX/process
Date: January 2012
contact: Lee Jones <lee.jones@linaro.org>
Description:
- Read-only attribute supported ST-Ericsson's silicon. Contains the
+ Read-only attribute supported ST-Ericsson's silicon. Contains
the process by which the silicon chip was manufactured.
What: /sys/bus/soc
diff --git a/Documentation/ABI/testing/sysfs-wusb_cbaf b/Documentation/ABI/testing/sysfs-wusb_cbaf
index a99c5f86a37a..0f3cf35d6cd8 100644
--- a/Documentation/ABI/testing/sysfs-wusb_cbaf
+++ b/Documentation/ABI/testing/sysfs-wusb_cbaf
@@ -58,7 +58,7 @@ Description:
hex octets.
Writes fetches device's supported band groups and the
- the CDID for any existing association with this host.
+ CDID for any existing association with this host.
What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_host_name
Date: August 2008
diff --git a/Documentation/DocBook/crypto-API.tmpl b/Documentation/DocBook/crypto-API.tmpl
index efc8d90a9a3f..0b05cd0d646f 100644
--- a/Documentation/DocBook/crypto-API.tmpl
+++ b/Documentation/DocBook/crypto-API.tmpl
@@ -443,7 +443,7 @@
The type flag specifies the type of the cipher algorithm.
The caller usually provides a 0 when the caller wants the
default handling. Otherwise, the caller may provide the
- following selections which match the the aforementioned
+ following selections which match the aforementioned
cipher types:
</para>
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 4e9462f1ab4c..b018892f56da 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3414,7 +3414,7 @@ giving priority to the center of the metered area.</entry>
<row>
<entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant> </entry>
<entry>A multi-zone metering. The light intensity is measured
-in several points of the frame and the the results are combined. The
+in several points of the frame and the results are combined. The
algorithm of the zones selection and their significance in calculating the
final value is device dependent.</entry>
</row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
index f4e28e7d4751..721728745407 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
@@ -267,7 +267,7 @@ is intended for still imaging applications. The idea is to get the
best possible image quality that the hardware can deliver. It is not
defined how the driver writer may achieve that; it will depend on the
hardware and the ingenuity of the driver writer. High quality mode is
-a different mode from the the regular motion video capture modes. In
+a different mode from the regular motion video capture modes. In
high quality mode:<itemizedlist>
<listitem>
<para>The driver may be able to capture higher
diff --git a/Documentation/PCI/pci-error-recovery.txt b/Documentation/PCI/pci-error-recovery.txt
index ac26869c7db4..19c3fc5a7c67 100644
--- a/Documentation/PCI/pci-error-recovery.txt
+++ b/Documentation/PCI/pci-error-recovery.txt
@@ -255,8 +255,8 @@ The platform then proceeds to either STEP 4 (Slot Reset) or STEP 5
STEP 4: Slot Reset
------------------
-In response to a return value of PCI_ERS_RESULT_NEED_RESET, the
-the platform will perform a slot reset on the requesting PCI device(s).
+In response to a return value of PCI_ERS_RESULT_NEED_RESET,
+the platform will perform a slot reset on the requesting PCI device(s).
The actual steps taken by a platform to perform a slot reset
will be platform-dependent. Upon completion of slot reset, the
platform will call the device slot_reset() callback.
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index b78564b2b201..3c473ec1c885 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -113,7 +113,7 @@ Required properties (in root node):
Required nodes:
- soc: some node of the RealView platforms must be the SoC
- node that contain the SoC-specific devices, withe the compatible
+ node that contain the SoC-specific devices, with the compatible
string set to one of these tuples:
"arm,realview-eb-soc", "simple-bus"
"arm,realview-pb1176-soc", "simple-bus"
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
index 8b70db103ca7..4679bde972c6 100644
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
@@ -37,7 +37,7 @@ Required properties:
You specify supplies using the standard regulator bindings by including
-a phandle the relevant regulator. All specified supplies must be able
+a phandle to the relevant regulator. All specified supplies must be able
to report their voltage. The IO Voltage Domain for any non-specified
supplies will be not be touched.
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index aff22113a986..e54896427b4a 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -373,7 +373,7 @@ variation uses the path and optionally arg1 set to an autofs mount type.
The call returns 1 if this is a mount point and sets arg1 to the device
number of the mount and field arg2 to the relevant super block magic
number (described below) or 0 if it isn't a mountpoint. In both cases
-the the device number (as returned by new_encode_dev()) is returned
+the device number (as returned by new_encode_dev()) is returned
in field arg1.
If supplied with a file descriptor we're looking for a specific mount,
@@ -387,7 +387,7 @@ is one or 0 if it isn't a mountpoint.
If a path is supplied (and the ioctlfd field is set to -1) then the path
is looked up and is checked to see if it is the root of a mount. If a
type is also given we are looking for a particular autofs mount and if
-a match isn't found a fail is returned. If the the located path is the
+a match isn't found a fail is returned. If the located path is the
root of a mount 1 is returned along with the super magic of the mount
or 0 otherwise.
diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.txt
index 6db0e5d1da07..570ab727b379 100644
--- a/Documentation/filesystems/overlayfs.txt
+++ b/Documentation/filesystems/overlayfs.txt
@@ -162,7 +162,7 @@ rename or unlink will of course be noticed and handled).
Multiple lower layers
---------------------
-Multiple lower layers can now be given using the the colon (":") as a
+Multiple lower layers can now be given using the colon (":") as a
separator character between the directory names. For example:
mount -t overlay overlay -olowerdir=/lower1:/lower2:/lower3 /merged
diff --git a/Documentation/filesystems/sysfs-tagging.txt b/Documentation/filesystems/sysfs-tagging.txt
index eb843e49c5a3..72f1e2709049 100644
--- a/Documentation/filesystems/sysfs-tagging.txt
+++ b/Documentation/filesystems/sysfs-tagging.txt
@@ -12,7 +12,7 @@ To avoid that problem and allow existing applications in network
namespaces to see the same interface that is currently presented in
sysfs, sysfs now has tagging directory support.
-By using the network namespace pointers as tags to separate out the
+By using the network namespace pointers as tags to separate out
the sysfs directory entries we ensure that we don't have conflicts
in the directories and applications only see a limited set of
the network devices.
diff --git a/Documentation/hwmon/lm93 b/Documentation/hwmon/lm93
index f3b2ad2ceb01..29323ecb6b68 100644
--- a/Documentation/hwmon/lm93
+++ b/Documentation/hwmon/lm93
@@ -122,7 +122,7 @@ Smart Tach Mode:
achieved despite the signal corruption. In smart tach mode all
four signals are measured within 4 seconds.
-Smart tach mode is enabled by the driver by writing 1 or 2 (associating the
+Smart tach mode is enabled by the driver by writing 1 or 2 (associating
the fan tachometer with a pwm) to the sysfs file fan<n>_smart_tach. A zero
will disable the function for that fan. Note that Smart tach mode cannot be
enabled if the PWM output frequency is 22500 Hz (see below).
diff --git a/Documentation/i2c/dev-interface b/Documentation/i2c/dev-interface
index 2ac78ae1039d..259dd4ee064d 100644
--- a/Documentation/i2c/dev-interface
+++ b/Documentation/i2c/dev-interface
@@ -113,7 +113,7 @@ ioctl(file, I2C_TENBIT, long select)
ioctl(file, I2C_PEC, long select)
Selects SMBus PEC (packet error checking) generation and verification
if select not equals 0, disables if select equals 0. Default 0.
- Used only for SMBus transactions. This request only has an effect if the
+ Used only for SMBus transactions. This request only has an effect if
the adapter has I2C_FUNC_SMBUS_PEC; it is still safe if not, it just
doesn't have any effect.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 274252f205b7..c94b7d35fb6b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2755,7 +2755,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
windows need to be expanded.
ecrc= Enable/disable PCIe ECRC (transaction layer
end-to-end CRC checking).
- bios: Use BIOS/firmware settings. This is the
+ bios: Use BIOS/firmware settings. This is
the default.
off: Turn ECRC off
on: Turn ECRC on.
diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt
index 16a924c486bf..369deeb194e7 100644
--- a/Documentation/networking/rxrpc.txt
+++ b/Documentation/networking/rxrpc.txt
@@ -233,7 +233,7 @@ Interaction with the user of the RxRPC socket:
without fear of interference.
(*) In the server, a request is received with one or more recvmsgs, then the
- the reply is transmitted with one or more sendmsgs, and then the final ACK
+ reply is transmitted with one or more sendmsgs, and then the final ACK
is received with a last recvmsg.
(*) When sending data for a call, sendmsg is given MSG_MORE if there's more
diff --git a/Documentation/networking/vxlan.txt b/Documentation/networking/vxlan.txt
index 6d993510f091..8c95975dc898 100644
--- a/Documentation/networking/vxlan.txt
+++ b/Documentation/networking/vxlan.txt
@@ -25,7 +25,7 @@ where VXLAN was first merged upstream.
# ip li add vxlan0 type vxlan id 42 group 239.1.1.1 dev eth1
This creates a new device (vxlan0). The device uses the
-the multicast group 239.1.1.1 over eth1 to handle packets where
+multicast group 239.1.1.1 over eth1 to handle packets where
no entry is in the forwarding table.
2. Delete vxlan device
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index 371361c69a4b..6bce2443f9fc 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -83,7 +83,7 @@ should contain the phy name as given in the dt data and in the case of
non-dt boot, it should contain the label of the PHY. The two
devm_phy_get associates the device with the PHY using devres on
successful PHY get. On driver detach, release function is invoked on
-the the devres data and devres data is freed. phy_optional_get and
+the devres data and devres data is freed. phy_optional_get and
devm_phy_optional_get should be used when the phy is optional. These
two functions will never return -ENODEV, but instead returns NULL when
the phy cannot be found.
diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt
index ce60ffa94d2d..9243d0498b2d 100644
--- a/Documentation/sysfs-rules.txt
+++ b/Documentation/sysfs-rules.txt
@@ -176,8 +176,8 @@ versions of the sysfs interface.
-ENXIO: The read or store operation failed
Error codes will not be changed without good reason, and should a change
- to error codes result in user-space breakage, it will be fixed, or the
- the offending change will be reverted.
+ to error codes result in user-space breakage, it will be fixed,
+ or the offending change will be reverted.
Userspace applications can, however, expect the format and contents of
the attribute files to remain consistent in the absence of a version
diff --git a/Documentation/vm/ksm.txt b/Documentation/vm/ksm.txt
index f34a8ee6f860..f0a536cfc0fb 100644
--- a/Documentation/vm/ksm.txt
+++ b/Documentation/vm/ksm.txt
@@ -33,7 +33,7 @@ probably arousing the Out-Of-Memory killer.
If KSM is not configured into the running kernel, madvise MADV_MERGEABLE
and MADV_UNMERGEABLE simply fail with EINVAL. If the running kernel was
built with CONFIG_KSM=y, those calls will normally succeed: even if the
-the KSM daemon is not currently running, MADV_MERGEABLE still registers
+KSM daemon is not currently running, MADV_MERGEABLE still registers
the range for whenever the KSM daemon is started; even if the range
cannot contain any pages which KSM could actually merge; even if
MADV_UNMERGEABLE is applied to a range which was never MADV_MERGEABLE.
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index 3be0bfc4738d..823ad88908f3 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -465,7 +465,7 @@ MLOCKED PAGES will apply.
mmap(MAP_LOCKED) SYSTEM CALL HANDLING
-------------------------------------
-In addition the mlock()/mlockall() system calls, an application can request
+In addition to the mlock()/mlockall() system calls, an application can request
that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
diff --git a/Documentation/xillybus.txt b/Documentation/xillybus.txt
index 81d111b4dc28..7cc1ea9a4215 100644
--- a/Documentation/xillybus.txt
+++ b/Documentation/xillybus.txt
@@ -274,7 +274,7 @@ buffer is full, the FPGA informs the host about that (appending a
XILLYMSG_OPCODE_RELEASEBUF message channel 0 and sending an interrupt if
necessary). The host responds by making the data available for reading through
the character device. When all data has been read, the host writes on the
-the FPGA's buffer control register, allowing the buffer's overwriting. Flow
+FPGA's buffer control register, allowing the buffer's overwriting. Flow
control mechanisms exist on both sides to prevent underflows and overflows.
This is not good enough for creating a TCP/IP-like stream: If the data flow
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 392e7ae69452..36f36818288f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1932,7 +1932,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
+ appended to the device tree bootargs property.
endchoice
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index d1c3f3a71c94..4f697edd0bad 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -22,7 +22,7 @@
#ifndef __ASSEMBLY__
-/* Unwind reason code according the the ARM EABI documents */
+/* Unwind reason code according to the ARM EABI documents */
enum unwind_reason_code {
URC_OK = 0, /* operation completed successfully */
URC_CONTINUE_UNWIND = 8,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 355b08936871..2a7ffd01065e 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -752,7 +752,7 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
}
/**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * _init_main_clk - get a struct clk * for the hwmod's main functional clk
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
@@ -790,7 +790,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
}
/**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
@@ -834,7 +834,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
}
/**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 01de542432a6..6f92e75b6c35 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -423,7 +423,7 @@ static void __init imote2_stargate2_init(void)
}
#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
+/* As the imote2 doesn't currently have a conventional SD slot
* there is no option to hotplug cards, making all this rather simple
*/
static int imote2_mci_get_ro(struct device *dev)
diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S
index b93170e1cc93..d0f01cff23b3 100644
--- a/arch/arm64/crypto/aes-neon.S
+++ b/arch/arm64/crypto/aes-neon.S
@@ -47,7 +47,7 @@
prepare .LReverse_Sbox, .LReverse_ShiftRows, \temp
.endm
- /* apply SubBytes transformation using the the preloaded Sbox */
+ /* apply SubBytes transformation using the preloaded Sbox */
.macro sub_bytes, in
sub v9.16b, \in\().16b, v12.16b
tbl \in\().16b, {v16.16b-v19.16b}, \in\().16b
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 86b5a095c5a1..9c8612385e00 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -480,7 +480,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
#ifdef CONFIG_EXACT_HWERR
/* Make sure all pending read/writes complete. This will ensure any
* accesses which could cause hardware errors completes, and signal
- * the the hardware before we do something silly, like crash the
+ * the hardware before we do something silly, like crash the
* kernel. We don't need to work around anomaly 05000312, since
* we are already atomic
*/
diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c
index 46fd2d530271..2853e4fc2fdf 100644
--- a/arch/c6x/platforms/cache.c
+++ b/arch/c6x/platforms/cache.c
@@ -439,7 +439,7 @@ void __init c6x_cache_init(void)
if (!cache_base)
return;
- /* Set L2 caches on the the whole L2 SRAM memory */
+ /* Set L2 caches on the whole L2 SRAM memory */
L2_cache_set_mode(L2MODE_SIZE);
/* Enable L1 */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 45698cd15b7b..bd6ea40f3ef9 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -23,7 +23,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
* The pad bits in the middle are used to prevent the next_ticket number
* overflowing into the now_serving number.
*
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
index 2a88c7204e52..809ddb6896db 100644
--- a/arch/ia64/include/asm/uv/uv_hub.h
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -257,7 +257,7 @@ static inline int uv_numa_blade_id(void)
return 0;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return 0;
diff --git a/arch/m68k/coldfire/intc-2.c b/arch/m68k/coldfire/intc-2.c
index 995093357c59..f74f0e473119 100644
--- a/arch/m68k/coldfire/intc-2.c
+++ b/arch/m68k/coldfire/intc-2.c
@@ -7,7 +7,7 @@
* family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
* controllers, and the 547x and 548x families which have only one of them.
*
- * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * The external 7 fixed interrupts are part of the Edge Port unit of these
* ColdFire parts. They can be configured as level or edge triggered.
*
* (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff986a23..30052da1f1a4 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -211,7 +211,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
/*
* Get a pointer to where the new child's register block should have
* been pushed.
- * The Meta's stack grows upwards, and the context is the the first
+ * The Meta's stack grows upwards, and the context is the first
* thing to be pushed by TBX (phew)
*/
*childregs = *current_pt_regs();
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index ef548510b951..d0c28f6863b4 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -446,7 +446,7 @@ TRAP_return: /* Make global symbol for debugging */
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look like the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index bfeb8f3c0be6..203767dbeb64 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -16,7 +16,7 @@
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
* is to trigger a wakeup.
*/
diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
index c370426a7322..7f122c1d5d0e 100644
--- a/arch/mips/cavium-octeon/Kconfig
+++ b/arch/mips/cavium-octeon/Kconfig
@@ -90,7 +90,7 @@ config OCTEON_ILM
tristate "Module to measure interrupt latency using Octeon CIU Timer"
help
This driver is a module to measure interrupt latency using the
- the CIU Timers on Octeon.
+ CIU Timers on Octeon.
To compile this driver as a module, choose M here. The module
will be called octeon-ilm
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index df69bfd2b006..4ec669f5b0d4 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index)
* offsetof() to determine the offsets into packet headers.
* For example, offsetof(ethhdr, protocol) returns the offset
* of the ethernet protocol field. The bitmask selects which
- * bytes to include the the tag, with bit offset X selecting
+ * bytes to include in the tag, with bit offset X selecting
* byte at offset X from the beginning of the packet data.
* @len: Number of bytes to include. Usually this is the sizeof()
* the field.
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index 1fca2e0793dc..fe0c7bbf4d5f 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -32,7 +32,7 @@
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*/
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index bb68e8d520e8..ad1ba911a158 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -1629,7 +1629,7 @@ int __init kvm_mips_init(void)
* requires TLBs. The TLB handling code is statically linked with
* the rest of the kernel (tlb.c) to avoid the possibility of
* double faulting. The issue is that the TLB code references
- * routines that are part of the the KVM module, which are only
+ * routines that are part of the KVM module, which are only
* available once the module is loaded.
*/
kvm_mips_gfn_to_pfn = gfn_to_pfn;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 05b1d7cf9514..1647426364b9 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -350,7 +350,7 @@ static void co_cache_error_call_notifiers(unsigned long val)
}
/*
- * Called when the the exception is recoverable
+ * Called when the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -359,7 +359,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
}
/**
- * Called when the the exception is not recoverable
+ * Called when the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d428e8471eec..1d1eb1e10ae2 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -144,7 +144,7 @@ void xlr_percpu_fmn_init(void)
* For sending FMN messages, we need credits on the destination
* bucket. Program the credits this core has on the 128 possible
* destination buckets.
- * We cannot use a loop here, because the the first argument has
+ * We cannot use a loop here, because the first argument has
* to be a constant integer value.
*/
COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 0dc42c5082b7..04b90ad406b4 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -52,7 +52,7 @@ static inline void logmpp(u64 x)
/*
* For a snooping icache, we still need a dummy icbi to purge all the
* prefetched instructions from the ifetch buffers. We also need a sync
- * before the icbi to order the the actual stores to memory that might
+ * before the icbi to order the actual stores to memory that might
* have modified instructions with the icbi.
*/
#define PURGE_PREFETCHED_INS \
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index 334459ad145b..b3219b0ca2c4 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -246,7 +246,7 @@ static inline unsigned int ev_int_get_mask(unsigned int interrupt,
* ev_int_eoi - signal the end of interrupt processing
* @interrupt: the interrupt number
*
- * This function signals the end of processing for the the specified
+ * This function signals the end of processing for the specified
* interrupt, which must be the interrupt currently in service. By
* definition, this is also the highest-priority interrupt.
*
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index ac6432d9be46..a18702780733 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -30,7 +30,7 @@ struct arch_hw_breakpoint {
u16 len; /* length of the target data symbol */
};
-/* Note: Don't change the the first 6 bits below as they are in the same order
+/* Note: Don't change the first 6 bits below as they are in the same order
* as the dabr and dabrx.
*/
#define HW_BRK_TYPE_READ 0x01
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index d48125d0c048..01ecece4ca83 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -94,7 +94,7 @@ __secondary_hold_acknowledge:
#ifdef CONFIG_RELOCATABLE
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
- * is used by kexec-tools to keep the the kdump kernel in the
+ * is used by kexec-tools to keep the kdump kernel in the
* crash_kernel region. The loader is responsible for
* observing the alignment requirement.
*/
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index fa9d5c238d22..ffb5c0fd38b0 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -948,7 +948,7 @@ void flush_dcache_icache_hugepage(struct page *page)
* (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table
*
* So long as we atomically load page table pointers we are safe against teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index c949ca055712..27cc1a222295 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -9,7 +9,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * This file is a driver for the the General Purpose Timer (gpt) devices
+ * This file is a driver for the General Purpose Timer (gpt) devices
* found on the MPC5200 SoC. Each timer has an IO pin which can be used
* for GPIO or can be used to raise interrupts. The timer function can
* be used independently from the IO pin, or it can be used to control
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 15ebc4e8a151..6a0866904818 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -251,7 +251,7 @@ static void briq_restart(char *cmd)
* Per default, input/output-device points to the keyboard/screen
* If no card is installed, the built-in serial port is used as a fallback.
* But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
- * the the built-in serial node. Instead, a /failsafe node is created.
+ * to the built-in serial node. Instead, a /failsafe node is created.
*/
static __init void chrp_init_early(void)
{
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 920c252d1f49..c72ecc21f8f4 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -2418,7 +2418,7 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
/*
* This function is supposed to be called on basis of PE from top
- * to bottom style. So the the I/O or MMIO segment assigned to
+ * to bottom style. So the I/O or MMIO segment assigned to
* parent PE could be overrided by its child PEs if necessary.
*/
static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index e599259d84fc..e1766153202e 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -293,7 +293,7 @@ static void write_ciabr(unsigned long ciabr)
* set_ciabr() - set the CIABR
* @addr: The value to set.
*
- * This function sets the correct privilege value into the the HW
+ * This function sets the correct privilege value into the HW
* breakpoint address before writing it up in the CIABR register.
*/
static void set_ciabr(unsigned long addr)
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index e6a1578fc000..c14898e820ba 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1128,7 +1128,7 @@ static void debug_sample_entry(struct hws_combined_entry *sample,
* combined-sampling data entry consists of a basic- and a diagnostic-sampling
* data entry. The sampling function is determined by the flags in the perf
* event hardware structure. The function always works with a combined-sampling
- * data entry but ignores the the diagnostic portion if it is not available.
+ * data entry but ignores the diagnostic portion if it is not available.
*
* Note that the implementation focuses on basic-sampling data entries and, if
* such an entry is not valid, the entire combined-sampling data entry is
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 1eb41bb3010c..d56b7ddc651d 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -183,7 +183,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* prevent the pagetables from being freed on s390.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 6f7251fd2eab..f9baa6852bd2 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -306,7 +306,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
- * firmware can sample the value before the the IDE
+ * firmware can sample the value before the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index 2e5c4fc2daa9..d2154ab0bfe2 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -219,7 +219,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
* the pagetables from being freed on sparc.
*
* So long as we atomically load page table pointers versus teardown,
- * we can follow the address down to the the page and take a ref on it.
+ * we can follow the address down to the page and take a ref on it.
*/
local_irq_disable();
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index a07e31b50d3f..85abaa483bcf 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -339,7 +339,7 @@ config CMDLINE_BOOL
To compile command line arguments into the kernel,
set this option to 'Y', then fill in the
- the boot arguments in CONFIG_CMDLINE.
+ boot arguments in CONFIG_CMDLINE.
Systems with fully functional boot loaders (e.g. mboot, or
if booting over PCI) should leave this option set to 'N'.
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 60d62a292fce..a9554b167e96 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -116,7 +116,7 @@
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
* Likewise, INTCTRL_K is removed and re-added during device
- * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * interrupts, as is the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
* to know our current state.
diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h
index df10a662cc25..50a3d5cbad20 100644
--- a/arch/tile/include/gxio/trio.h
+++ b/arch/tile/include/gxio/trio.h
@@ -206,7 +206,7 @@ typedef struct {
/* Initialize a TRIO context.
*
* This function allocates a TRIO "service domain" and maps the MMIO
- * registers into the the caller's VA space.
+ * registers into the caller's VA space.
*
* @param trio_index Which TRIO shim; Gx36 must pass 0.
* @param context Context object to be initialized.
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index 53f7b9def07b..ea5e7e84fcf0 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -276,7 +276,7 @@ P("\n");
/*
* Called after execve() has started the new image. This allows us
- * to reset the info state. Note that the the mmap'ed memory, if there
+ * to reset the info state. Note that the mmap'ed memory, if there
* was any, has already been unmapped by the exec.
*/
void single_step_execve(void)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6049d587599e..9cc08595528c 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2013,7 +2013,7 @@ config CMDLINE_BOOL
To compile command line arguments into the kernel,
set this option to 'Y', then fill in the
- the boot arguments in CONFIG_CMDLINE.
+ boot arguments in CONFIG_CMDLINE.
Systems with fully functional boot loaders (i.e. non-embedded)
should leave this option set to 'N'.
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index cf87de3fc390..15d1b0a8eff8 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -91,7 +91,7 @@ static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
* the queue, and the other indicating the current tail. The lock is acquired
* by atomically noting the tail and incrementing it by one (thus adding
* ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
+ * becomes equal to the initial value of the tail.
*
* We use an xadd covering *both* parts of the lock, to increment the tail and
* also load the position of the head, which takes care of memory ordering
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index a00ad8f2a657..3260b75fd427 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -512,7 +512,7 @@ static inline int uv_numa_blade_id(void)
return uv_hub_info->numa_blade_id;
}
-/* Convert a cpu number to the the UV blade number */
+/* Convert a cpu number to the UV blade number */
static inline int uv_cpu_to_blade_id(int cpu)
{
return uv_cpu_to_blade[cpu];
diff --git a/arch/x86/kernel/cpu/perf_event_intel_cqm.c b/arch/x86/kernel/cpu/perf_event_intel_cqm.c
index e4d1b8b738fa..e7ef624e4f47 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_cqm.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_cqm.c
@@ -567,7 +567,7 @@ static bool intel_cqm_rmid_stabilize(unsigned int *available)
/*
* The rotation RMID gets priority if it's
* currently invalid. In which case, skip adding
- * the RMID to the the free lru.
+ * the RMID to the free lru.
*/
if (!__rmid_valid(intel_cqm_rotation_rmid)) {
intel_cqm_rotation_rmid = entry->rmid;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index e1a81267f3f6..8ee569ae7bff 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7446,7 +7446,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
if (current->mm == kvm->mm) {
/*
* Free memory regions allocated on behalf of userspace,
- * unless the the memory map has changed due to process exit
+ * unless the memory map has changed due to process exit
* or fd copying.
*/
struct kvm_userspace_memory_region mem;
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 81bf3d2af3eb..5862a503e0fa 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -288,7 +288,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
@@ -360,7 +360,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
*
* So long as we atomically load page table pointers versus teardown
* (which we do on x86, with the above PAE exception), we can follow the
- * address down to the the page and take a ref on it.
+ * address down to the page and take a ref on it.
*/
local_irq_disable();
pgdp = pgd_offset(mm, addr);
diff --git a/arch/x86/platform/efi/efi_thunk_64.S b/arch/x86/platform/efi/efi_thunk_64.S
index ff85d28c50f2..13f24526ccd0 100644
--- a/arch/x86/platform/efi/efi_thunk_64.S
+++ b/arch/x86/platform/efi/efi_thunk_64.S
@@ -7,7 +7,7 @@
* The below thunking functions are only used after ExitBootServices()
* has been called. This simplifies things considerably as compared with
* the early EFI thunking because we can leave all the kernel state
- * intact (GDT, IDT, etc) and simply invoke the the 32-bit EFI runtime
+ * intact (GDT, IDT, etc) and simply invoke the 32-bit EFI runtime
* services from __KERNEL32_CS. This means we can continue to service
* interrupts across an EFI mixed mode call.
*
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 55f388ef481a..e0adc53e9645 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -689,7 +689,7 @@ char * __init xen_memory_setup(void)
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
- * We tried to make the the memblock_reserve more selective so
+ * We tried to make the memblock_reserve more selective so
* that it would be clear what region is reserved. Sadly we ran
* in the problem wherein on a 64-bit hypervisor with a 32-bit
* initial domain, the pt_base has the cr3 value which is not
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index e256f2270ec9..23f291682f84 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -6,7 +6,7 @@
* For the new V3 MMU we remap the TLB from virtual == physical
* to the standard Linux mapping used in earlier MMU's.
*
- * The the MMU we also support a new configuration register that
+ * In the MMU we also support a new configuration register that
* specifies how the S32C1I instruction operates with the cache
* controller.
*
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 82bbfa5a05b3..94044cc958c2 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -384,7 +384,7 @@ common_exception:
/* Save optional registers. */
save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
-
+
#ifdef CONFIG_TRACE_IRQFLAGS
l32i a4, a1, PT_DEPC
/* Double exception means we came here with an exception
@@ -433,7 +433,7 @@ common_exception_return:
* We need to check some flags for signal handling and rescheduling,
* and have to restore WB and WS, extra states, and all registers
* in the register file that were in use in the user task.
- * Note that we don't disable interrupts here.
+ * Note that we don't disable interrupts here.
*/
_bbsi.l a4, TIF_NEED_RESCHED, 3f
@@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception)
* of the proper size instead.
*
* This algorithm simply backs out the register changes started by the user
- * excpetion handler, makes it appear that we have started a window underflow
+ * exception handler, makes it appear that we have started a window underflow
* by rotating the window back and then setting the old window base (OWB) in
* the 'ps' register with the rolled back window base. The 'movsp' instruction
* will be re-executed and this time since the next window frames is in the
* active AR registers it won't cause an exception.
*
* If the WindowUnderflow code gets a TLB miss the page will get mapped
- * the the partial windeowUnderflow will be handeled in the double exception
+ * and the partial window underflow will be handled in the double exception
* handler.
*
* Entry condition:
@@ -1567,8 +1567,8 @@ ENTRY(fast_second_level_miss)
2: /* Special case for cache aliasing.
* We (should) only get here if a clear_user_page, copy_user_page
- * or the aliased cache flush functions got preemptively interrupted
- * by another task. Re-establish temporary mapping to the
+ * or the aliased cache flush functions got preemptively interrupted
+ * by another task. Re-establish temporary mapping to the
* TLBTEMP_BASE areas.
*/
diff --git a/crypto/asymmetric_keys/pkcs7_parser.h b/crypto/asymmetric_keys/pkcs7_parser.h
index efc7dc9b8f9c..0e51bec18672 100644
--- a/crypto/asymmetric_keys/pkcs7_parser.h
+++ b/crypto/asymmetric_keys/pkcs7_parser.h
@@ -40,7 +40,7 @@ struct pkcs7_signed_info {
*
* This contains the generated digest of _either_ the Content Data or
* the Authenticated Attributes [RFC2315 9.3]. If the latter, one of
- * the attributes contains the digest of the the Content Data within
+ * the attributes contains the digest of the Content Data within
* it.
*/
struct public_key_signature sig;
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 853aa2dbdb61..898c59164ec6 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -47,7 +47,7 @@
/*
* Common set of includes for all ACPICA source files.
* We put them here because we don't want to duplicate them
- * in the the source code again and again.
+ * in the source code again and again.
*
* Note: The order of these include files is important.
*/
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 7d2486005e3f..b9b082980926 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -435,7 +435,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
* The 64-bit X fields are optional extensions to the original 32-bit FADT
* V1.0 fields. Even if they are present in the FADT, they are optional and
* are unused if the BIOS sets them to zero. Therefore, we must copy/expand
- * 32-bit V1.0 fields to the 64-bit X fields if the the 64-bit X field is
+ * 32-bit V1.0 fields to the 64-bit X fields if the 64-bit X field is
* originally zero.
*
* For ACPI 1.0 FADTs (that contain no 64-bit addresses), all 32-bit address
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index dd9dfa15e9d1..d086acf9562f 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -563,7 +563,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
wake_up_interruptible(&apm_waitqueue);
/*
- * Wait for the the suspend_acks_pending variable to drop to
+ * Wait for the suspend_acks_pending variable to drop to
* zero, meaning everybody acked the suspend event (or the
* process was killed.)
*
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 02225eb19cf6..619f3a30ec55 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -111,7 +111,7 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
}
/**
- * fifo_icap_set_read_size - Set the the size register.
+ * fifo_icap_set_read_size - Set the size register.
* @drvdata: a pointer to the drvdata.
* @data: the size of the following read transaction, in words.
**/
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index 5db147859b90..803e5b5536f5 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -167,7 +167,7 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv)
/*
* Look for the timer stop flag in the different states, so that we know
* if the broadcast timer has to be set up. The loop is in the reverse
- * order, because usually one of the deeper states have this flag set.
+ * order, because usually one of the deeper states has this flag set.
*/
for (i = drv->state_count - 1; i >= 0 ; i--) {
if (drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP) {
diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 5da5b98b8f29..60f2267c1350 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -53,7 +53,7 @@
#define CMD0_IRQ_THRESHOLD 1
/*
- * The timeout period (in jiffies) for a PDU. When the the number of PDUs in
+ * The timeout period (in jiffies) for a PDU. When the number of PDUs in
* flight is greater than the STAT_IRQ_THRESHOLD or 0 the timer is disabled.
* When there are packets in flight but lower than the threshold, we enable
* the timer and at expiry, attempt to remove any processed packets from the
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 5f5f360628fc..f7a8f80b40d7 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -435,7 +435,7 @@ static int hash_get_device_data(struct hash_ctx *ctx,
* @keylen: The lengt of the key.
*
* Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the the hw design spec. Either due to incorrect info in the
+ * specified in the hw design spec. Either due to incorrect info in the
* spec or due to a bug in the hw.
*/
static void hash_hw_write_key(struct hash_device_data *device_data,
diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c
index 228bbf910461..d028f44916cc 100644
--- a/drivers/firmware/efi/runtime-wrappers.c
+++ b/drivers/firmware/efi/runtime-wrappers.c
@@ -82,7 +82,7 @@ static DEFINE_SPINLOCK(efi_runtime_lock);
* In order to prevent deadlocks under NMI, the wrappers for these functions
* may only grab the efi_runtime_lock or rtc_lock spinlocks if !efi_in_nmi().
* However, not all of the services listed are reachable through NMI code paths,
- * so the the special handling as suggested by the UEFI spec is only implemented
+ * so the special handling as suggested by the UEFI spec is only implemented
* for QueryVariableInfo() and SetVariable(), as these can be reached in NMI
* context through efi_pstore_write().
*/
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index 4ba7ed502131..1b6a13e37ffa 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -477,7 +477,7 @@ static int ichx_gpio_probe(struct platform_device *pdev)
/*
* If necessary, determine the I/O address of ACPI/power management
- * registers which are needed to read the the GPE0 register for GPI pins
+ * registers which are needed to read the GPE0 register for GPI pins
* 0 - 15 on some chipsets.
*/
if (!ichx_priv.desc->uses_gpe0)
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index b72906f5b999..1c24057610c3 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -131,7 +131,7 @@ static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned gpio_num,
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
+ * Actually the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
index 488f51d19427..96e6f204f66c 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
@@ -64,7 +64,7 @@ struct device_process_node {
*
* @initialize: Initializes the pipelines and memory module for that device.
*
- * @start: Initializes the resources/modules the the device needs for queues
+ * @start: Initializes the resources/modules that the device needs for queues
* execution. This function is called on device initialization and after the
* system woke up after suspension.
*
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index b6f076b213bc..92e267558dff 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1623,7 +1623,7 @@ EXPORT_SYMBOL(drm_mode_create_dirty_info_property);
* drm_mode_create_suggested_offset_properties - create suggests offset properties
* @dev: DRM device
*
- * Create the the suggested x/y offset property for connectors.
+ * Create the suggested x/y offset property for connectors.
*/
int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
{
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 1134526286c8..8fbb82448a16 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -537,12 +537,12 @@ EXPORT_SYMBOL(drm_mm_replace_node);
*
* The DRM range allocator supports this use-case through the scanning
* interfaces. First a scan operation needs to be initialized with
- * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The the driver adds
+ * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The driver adds
* objects to the roaster (probably by walking an LRU list, but this can be
* freely implemented) until a suitable hole is found or there's no further
* evitable object.
*
- * The the driver must walk through all objects again in exactly the reverse
+ * The driver must walk through all objects again in exactly the reverse
* order to restore the allocator state. Note that while the allocator is used
* in the scan mode no other operation is allowed.
*
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 27ea6bdebce7..085b6edba9ed 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2465,7 +2465,7 @@ int __i915_add_request(struct intel_engine_cs *ring,
/* Whilst this request exists, batch_obj will be on the
* active_list, and so will hold the active reference. Only when this
- * request is retired will the the batch_obj be moved onto the
+ * request is retired will the batch_obj be moved onto the
* inactive_list and lose its active reference. Hence we do not need
* to explicitly hold another reference here.
*/
diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c
index 1719078c763a..9f61665e9cb1 100644
--- a/drivers/gpu/drm/i915/i915_gem_userptr.c
+++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
@@ -241,7 +241,7 @@ i915_mmu_notifier_add(struct drm_device *dev,
* either has cancelled gup work queued and we need to
* return back to the user to give time for the gup-workers
* to flush their object references upon which the object will
- * be removed from the interval-tree, or the the range is
+ * be removed from the interval-tree, or the range is
* still in use by another client and the overlap is invalid.
*
* If we do have an overlap, we cannot use the interval tree
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f75173c20f47..30702cd7a74d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2915,7 +2915,7 @@ void intel_finish_reset(struct drm_device *dev)
/*
* Flips in the rings have been nuked by the reset,
* so update the base address of all primary
- * planes to the the last fb to make sure we're
+ * planes to the last fb to make sure we're
* showing the correct fb after a reset.
*/
intel_update_primary_planes(dev);
@@ -11170,7 +11170,7 @@ static int __intel_set_mode(struct drm_crtc *crtc,
}
/* Only after disabling all output pipelines that will be changed can we
- * update the the output configuration. */
+ * update the output configuration. */
intel_modeset_update_state(dev, prepare_pipes);
modeset_update_crtc_power_domains(dev);
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 92be50c39ffd..2be3040b28f1 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -2802,8 +2802,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t
ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
-usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 00c0d2ba22d3..36af5f14f622 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -353,7 +353,7 @@
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index bd7519fdd3f4..fa3512763c50 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -410,7 +410,7 @@ void radeon_doorbell_get_kfd_info(struct radeon_device *rdev,
/*
* radeon_wb_*()
- * Writeback is the the method by which the the GPU updates special pages
+ * Writeback is the method by which the GPU updates special pages
* in memory with the status of certain GPU events (fences, ring pointers,
* etc.).
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index df09ca7c4889..98311ab2b5ba 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -45,7 +45,7 @@
* for GPU/CPU synchronization. When the fence is written,
* it is expected that all buffers associated with that fence
* are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed. Whether
+ * that the relevant GPU caches have been flushed. Whether
* we use a scratch register or memory location depends on the asic
* and whether writeback is enabled.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c
index 2a5a4a9e772d..9c987173cd81 100644
--- a/drivers/gpu/drm/radeon/radeon_vm.c
+++ b/drivers/gpu/drm/radeon/radeon_vm.c
@@ -40,8 +40,8 @@
* can be mapped as snooped (cached system pages) or unsnooped
* (uncached system pages).
* Each VM has an ID associated with it and there is a page table
- * associated with each VMID. When execting a command buffer,
- * the kernel tells the the ring what VMID to use for that command
+ * associated with each VMID. When executing a command buffer,
+ * the kernel tells the ring what VMID to use for that command
* buffer. VMIDs are allocated dynamically as commands are submitted.
* The userspace drivers maintain their own address space and the kernel
* sets up their pages tables accordingly when they submit their
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 2978f5ee8d2a..865ad3093211 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -573,7 +573,7 @@ EXPORT_SYMBOL_GPL(vmbus_close);
* vmbus_sendpacket() - Send the specified buffer on the given channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @requestid: Identifier of the request
* @type: Type of packet that is being send e.g. negotiate, time
* packet etc.
@@ -794,7 +794,7 @@ EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
* vmbus_recvpacket() - Retrieve the user packet on the specified channel
* @channel: Pointer to vmbus_channel structure.
* @buffer: Pointer to the buffer you want to receive the data into.
- * @bufferlen: Maximum size of what the the buffer will hold
+ * @bufferlen: Maximum size of what the buffer will hold
* @buffer_actual_len: The actual size of the data after it was received
* @requestid: Identifier of the request
*
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index f518b8d7a5b5..f9196aabf890 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -882,8 +882,8 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the information we
- * need from DSDT.
+ * VMBUS is an acpi enumerated device. Get the IRQ information
+ * from DSDT.
*/
static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index 033d6aca47d3..d41d7e3bf31c 100644
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -117,7 +117,7 @@ static int ucd9200_probe(struct i2c_client *client,
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
- * for the the phases of the rail.
+ * for the phases of the rail.
*/
for (i = 0; i < info->pages; i++) {
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 28cfe97cf1e9..231b54591e2b 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -87,7 +87,7 @@
* These 3 values (SDR and DDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
+ * are also the possible values for ipath_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define IPATH_IB_SDR 1
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index ffd48bfc4923..43b6e64411d1 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -333,7 +333,7 @@ struct qib_verbs_txreq {
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for qib_link_speed_enabled and active
+ * are also the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index ced07391304b..a4ab4452e19b 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -17,7 +17,7 @@
/*
* Timer function which is run every scan_ms ms when the device is opened.
- * The dev input variable is set to the the input_dev pointer.
+ * The dev input variable is set to the input_dev pointer.
*/
static void gpio_mouse_scan(struct input_polled_dev *dev)
{
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 114f3bcba1b0..24c15bfb2199 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1566,7 +1566,7 @@ reset_hfcsusb(struct hfcsusb *hw)
write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
((hw->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 7dc93aa004c8..ff8e9a523b64 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -202,7 +202,7 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
/*:*/
/*H:030
- * Let's jump straight to the the main loop which runs the Guest.
+ * Let's jump straight to the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
* going around and around until something interesting happens.
*/
diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h
index e404b6e44802..ce0fb855c705 100644
--- a/drivers/media/dvb-frontends/tda1002x.h
+++ b/drivers/media/dvb-frontends/tda1002x.h
@@ -1,6 +1,6 @@
/*
TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c
index 71fb63299de7..17534ff576ca 100644
--- a/drivers/media/dvb-frontends/tda10048.c
+++ b/drivers/media/dvb-frontends/tda10048.c
@@ -1134,7 +1134,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
state->pll_pfactor = 0;
}
- /* Establish any defaults the the user didn't pass */
+ /* Establish any defaults the user didn't pass */
tda10048_establish_defaults(&state->frontend);
/* Set the xtal and freq defaults */
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..1f8820f5f8c0 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -37,7 +37,7 @@
(compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
/* We calculate the baseband frequencies of the carrier and the pilot tones
- * based on the the sampling rate of the audio rds fifo. */
+ * based on the sampling rate of the audio rds fifo. */
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index 2ad65eb29832..00e0818abfc9 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -555,7 +555,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f)
reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94);
/* Okay, we've wasted time working out the correct value,
- but if we use it, it fouls the the window alignment.
+ but if we use it, it fouls the window alignment.
Fudge it to what we want... */
reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16));
reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16));
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 4b0bec3766ed..100d81e1b770 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -635,7 +635,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
}
/* Check that the hardware is accessible. If the status bytes are
- * 0xFF then the device is not accessible, the the IRQ belongs
+ * 0xFF then the device is not accessible, the IRQ belongs
* to another driver.
* 4 x u32 interrupt registers.
*/
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 9a6c2cc38acb..add8613b4e05 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -316,7 +316,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
* vpbe_get_output - Get output
* @vpbe_dev - vpbe device ptr
*
- * return current vpbe output to the the index
+ * return current vpbe output to the index
*/
static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
{
diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 8a2fd8c33d42..d92eb5634d04 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -505,7 +505,7 @@ static int fimc_capture_open(struct file *file)
if (ret == 0 && vc->user_subdev_api && vc->inh_sensor_ctrls) {
/*
- * Recreate controls of the the video node to drop
+ * Recreate controls of the video node to drop
* any controls inherited from the sensor subdev.
*/
fimc_ctrls_delete(vc->ctx);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index deca80903c3a..27b8c49da605 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1701,7 +1701,7 @@ void omap3isp_print_status(struct isp_device *isp)
* To solve this problem power management support is split into prepare/complete
* and suspend/resume operations. The pipelines are stopped in prepare() and the
* ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
- * resume(), and the the pipelines are restarted in complete().
+ * resume(), and the pipelines are restarted in complete().
*
* TODO: PM dependencies between the ISP and sensors are not modelled explicitly
* yet.
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index d56f927fc31a..b5d2e805380d 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 474a17e4db0c..4c7f8fed8046 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h
index 0f461ca10cb9..82d19dcdebc0 100644
--- a/drivers/media/usb/dvb-usb/friio.h
+++ b/drivers/media/usb/dvb-usb/friio.h
@@ -2,7 +2,7 @@
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
- * This module is based off the the gl861 and vp702x modules.
+ * This module is based off the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
index 52bdb569760b..414c1b752911 100644
--- a/drivers/media/usb/gspca/finepix.c
+++ b/drivers/media/usb/gspca/finepix.c
@@ -143,7 +143,7 @@ again:
* for, then it's the end of the
* frame. Sometimes the jpeg is not complete,
* but there's nothing we can do. We also end
- * here if the the jpeg ends right at the end
+ * here if the jpeg ends right at the end
* of the frame. */
gspca_frame_add(gspca_dev, LAST_PACKET,
data, len);
diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c
index 2e8c3afe4ec4..b7b5a1f630af 100644
--- a/drivers/media/usb/tm6000/tm6000-cards.c
+++ b/drivers/media/usb/tm6000/tm6000-cards.c
@@ -1313,7 +1313,7 @@ static int tm6000_usb_probe(struct usb_interface *interface,
le16_to_cpu(dev->udev->descriptor.idProduct),
interface->altsetting->desc.bInterfaceNumber);
-/* check if the the device has the iso in endpoint at the correct place */
+/* check if the device has the iso in endpoint at the correct place */
if (!dev->isoc_in.endp) {
printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
rc = -ENODEV;
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 20ccc9d315dc..9ababe952b56 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1000,7 +1000,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
}
/* Synchronize to the input stream by waiting for the FID bit to be
- * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE.
+ * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE.
* stream->last_fid is initialized to -1, so the first isochronous
* frame will always be in sync.
*
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index b08407225db1..2c8ce861e6ea 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -984,7 +984,7 @@ static void v4l_sanitize_format(struct v4l2_format *fmt)
/*
* The v4l2_pix_format structure has been extended with fields that were
* not previously required to be set to zero by applications. The priv
- * field, when set to a magic value, indicates the the extended fields
+ * field, when set to a magic value, indicates that the extended fields
* are valid. Otherwise they will contain undefined values. To simplify
* the API towards drivers zero the extended fields and set the priv
* field to the magic value when the extended pixel format structure
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 04644e7b42b1..303b322756c7 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -373,7 +373,7 @@ static const struct lpddr2_addressing *get_addressing_table(
}
/*
- * Find the the right timing table from the array of timing
+ * Find the right timing table from the array of timing
* tables of the device using DDR clock frequency
*/
static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 613231c16194..4591bd235a00 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
* @target: per target private data
* @sdev: SCSI device
*
- * Update the target negotiation parameters based on the the Inquiry
+ * Update the target negotiation parameters based on the Inquiry
* data, adapter capabilities, and NVRAM settings.
**/
static void
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index cc1a404328c2..69f256d6a3ed 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -889,7 +889,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
- * This function sets the the operating point of the ARM.
+ * This function sets the operating point of the ARM.
*/
int db8500_prcmu_set_arm_opp(u8 opp)
{
diff --git a/drivers/misc/mic/bus/mic_bus.c b/drivers/misc/mic/bus/mic_bus.c
index 961ae90aae47..1b15af8c5101 100644
--- a/drivers/misc/mic/bus/mic_bus.c
+++ b/drivers/misc/mic/bus/mic_bus.c
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ drivers/virtio/virtio.c
*/
#include <linux/slab.h>
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 913de07e577c..6482a9c4eb44 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -48,7 +48,7 @@
* kernel/user requirements.
*
* Blade percpu resources reserved for kernel use. These resources are
- * reserved whenever the the kernel context for the blade is loaded. Note
+ * reserved whenever the kernel context for the blade is loaded. Note
* that the kernel context is not guaranteed to be always available. It is
* loaded on demand & can be stolen by a user if the user demand exceeds the
* kernel demand. The kernel can always reload the kernel context but
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 95c894482fdd..f87520cfb787 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1594,7 +1594,7 @@ out_2:
* by xpc_notify_senders_of_disconnect_uv(), and to also get an
* error returned here will confuse them. Additionally, since
* in this case the channel is being disconnected we don't need
- * to put the the msg_slot back on the free list.
+ * to put the msg_slot back on the free list.
*/
if (cmpxchg(&msg_slot->func, func, NULL) != func) {
ret = xpSuccess;
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 38b29265cc7c..be08822335d5 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1032,7 +1032,7 @@ static void __dw_mci_start_request(struct dw_mci *host,
* is just about to roll over.
*
* We do this whole thing under spinlock and only if the
- * command hasn't already completed (indicating the the irq
+ * command hasn't already completed (indicating that the irq
* already ran so we don't want the timeout).
*/
spin_lock_irqsave(&host->irq_lock, irqflags);
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 33f3c3c54dbc..6429d9cc6aa1 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -946,7 +946,7 @@ static uint8_t gpmi_read_byte(struct mtd_info *mtd)
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
- * because the the operations are the same.
+ * because the operations are the same.
*/
static void block_mark_swapping(struct gpmi_nand_data *this,
void *payload, void *auxiliary)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index c998212fc680..ac6426820b53 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -264,7 +264,7 @@ struct ubi_fm_pool {
/**
* struct ubi_volume - UBI volume description data structure.
- * @dev: device object to make use of the the Linux device model
+ * @dev: device object to make use of the Linux device model
* @cdev: character device object to create character device
* @ubi: reference to the UBI device description object
* @vol_id: volume ID
@@ -413,7 +413,7 @@ struct ubi_debug_info {
/**
* struct ubi_device - UBI device description structure
- * @dev: UBI device object to use the the Linux device model
+ * @dev: UBI device object to use for the Linux device model
* @cdev: character device object to create character device
* @ubi_num: UBI device number
* @ubi_name: UBI device name
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 16214d3d57a4..5db925061538 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -429,7 +429,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
/**
* sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
- * @e: the the physical eraseblock to erase
+ * @e: the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
*
* This function returns zero in case of success and a negative error code in
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 6bddfe062b51..4da461614f82 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -533,7 +533,7 @@ static int xcan_rx(struct net_device *ndev)
* @isr: interrupt status register value
*
* This is the CAN error interrupt and it will
- * check the the type of error and forward the error
+ * check the type of error and forward the error
* frame to upper layers.
*/
static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c
index e0f3d197e7f2..e02ffda21bce 100644
--- a/drivers/net/ethernet/agere/et131x.c
+++ b/drivers/net/ethernet/agere/et131x.c
@@ -1109,7 +1109,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
writel(0, &rxmac->mif_ctrl);
writel(0, &rxmac->space_avail);
- /* Initialize the the mif_ctrl register
+ /* Initialize the mif_ctrl register
* bit 3: Receive code error. One or more nibbles were signaled as
* errors during the reception of the packet. Clear this
* bit in Gigabit, set it in 100Mbit. This was derived
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index 63efa0dc45ba..1c29e795b320 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -1234,7 +1234,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
* @budget : maximum number of packets that the current CPU can receive from
* all interfaces.
* Description :
- * This function implements the the reception process.
+ * This function implements the reception process.
* Also it runs the TX completion thread
*/
static int xgmac_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index fb0bc3c3620e..0ce057fa573f 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2575,7 +2575,7 @@ static irqreturn_t be_intx(int irq, void *dev)
}
be_eq_notify(adapter, eqo->q.id, false, true, num_evts);
- /* Return IRQ_HANDLED only for the the first spurious intr
+ /* Return IRQ_HANDLED only for the first spurious intr
* after a valid intr to stop the kernel from branding
* this irq as a bad one!
*/
diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig
index 1085257385d2..7063fa533732 100644
--- a/drivers/net/ethernet/fujitsu/Kconfig
+++ b/drivers/net/ethernet/fujitsu/Kconfig
@@ -12,7 +12,7 @@ config NET_VENDOR_FUJITSU
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
- the questions about Fujitsu cards. If you say Y, you will be asked for
+ questions about Fujitsu cards. If you say Y, you will be asked for
your specific card in the following questions.
if NET_VENDOR_FUJITSU
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 45c8c864104e..960e5fa4fb7b 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -3986,7 +3986,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
* @hw: Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*/
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 9d81c0317433..7b96336f5771 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -4493,7 +4493,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
* @hw: pointer to the HW structure
*
* ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
- * register, so the the bus width is hard coded.
+ * register, so the bus width is hard coded.
**/
static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
index 1b2738380518..9c5e3a334724 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c
@@ -820,7 +820,7 @@ static s32 fm10k_mbx_read(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
* @hw: pointer to hardware structure
* @mbx: pointer to mailbox
*
- * This function copies the message from the the message array to mbmem
+ * This function copies the message from the message array to mbmem
**/
static void fm10k_mbx_write(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
{
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 0f69ef81751a..b8c3e7880e23 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2166,7 +2166,7 @@ out:
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index d3f4b0ceb3f7..0ce0c83246a7 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -245,7 +245,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
struct pci_dev *pdev;
- /* determine whether to use the the parent device
+ /* determine whether to use the parent device
*/
if (ixgbe_pcie_from_parent(&adapter->hw))
pdev = adapter->pdev->bus->parent->self;
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 1e0f72b65459..9670e6257b1f 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -2158,7 +2158,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
/*
* In PCI 33 mode, the P_PLL is not used, and therefore,
- * the the P_PLL_LOCK bit in the adapter_status register will
+ * the P_PLL_LOCK bit in the adapter_status register will
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
diff --git a/drivers/net/ethernet/rdc/Kconfig b/drivers/net/ethernet/rdc/Kconfig
index 2055f7eb2ba9..ca81037ab80c 100644
--- a/drivers/net/ethernet/rdc/Kconfig
+++ b/drivers/net/ethernet/rdc/Kconfig
@@ -26,7 +26,7 @@ config R6040
select PHYLIB
---help---
This is a driver for the R6040 Fast Ethernet MACs found in the
- the RDC R-321x System-on-chips.
+ RDC R-321x System-on-chips.
To compile this driver as a module, choose M here: the module
will be called r6040. This is recommended.
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 3b67d60d4378..b8da6e89059a 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -83,7 +83,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* returns: 0 on success, -ETIMEDOUT on a timeout
*
* Writes the value to the requested register by first writing the value
- * into MWD register. The the MCR register is then appropriately setup
+ * into MWD register. The MCR register is then appropriately setup
* to finish the write operation.
*/
static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 5a34e72bab9a..6113a29f01bc 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -250,14 +250,14 @@ struct i2400m_barker_db;
*
* @bus_setup: [optional fill] Function called by the bus-generic code
* [i2400m_setup()] to setup the basic bus-specific communications
- * to the the device needed to load firmware. See LIFE CYCLE above.
+ * to the device needed to load firmware. See LIFE CYCLE above.
*
* NOTE: Doesn't need to upload the firmware, as that is taken
* care of by the bus-generic code.
*
* @bus_release: [optional fill] Function called by the bus-generic
* code [i2400m_release()] to shutdown the basic bus-specific
- * communications to the the device needed to load firmware. See
+ * communications to the device needed to load firmware. See
* LIFE CYCLE above.
*
* This function does not need to reset the device, just tear down
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 0b602951ff6b..4466ee71d1e4 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -693,7 +693,7 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq,
* right spot where to insert the packet; we know the queue is
* not empty, so we are not the first ones; we also know we
* are not going to be the last ones. The list is sorted, so
- * we have to insert before the the first guy with an nsn_itr
+ * we have to insert before the first guy with an nsn_itr
* greater that our nsn. */
skb_queue_walk(&roq->queue, skb_itr) {
roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb;
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index f20886ade1cc..1f7b2b922fae 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -233,7 +233,7 @@
* i2400m_tx_skip_tail() Marks unusable FIFO tail space
* i2400m->bus_tx_kick()
*
- * Now i2400m->bus_tx_kick() is the the bus-specific driver backend
+ * Now i2400m->bus_tx_kick() is the bus-specific driver backend
* implementation; that would do:
*
* i2400m->bus_tx_kick()
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index e9cc7787bf5f..fab813d0d6cb 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -77,7 +77,7 @@ struct rx_attention {
* first_msdu is set.
*
* peer_idx_invalid
- * Indicates no matching entries within the the max search
+ * Indicates no matching entries within the max search
* count. Only set when first_msdu is set.
*
* peer_idx_timeout
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index dc6bd8cd9b83..e32154fe1732 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -98,7 +98,7 @@ struct bus_request {
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- * implemented using the asynchronous mode allowing the the bus
+ * implemented using the asynchronous mode allowing the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index eab0ab976af2..9963faaa465f 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1173,7 +1173,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
* Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
+ * response is available in the FIFO
*
* CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index fc08162b5820..68a96e3a0044 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -638,7 +638,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN,
AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT);
- /* on AR92xx, the highest bit of count will make the the chip send
+ /* on AR92xx, the highest bit of count will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 1ad66b76749b..c559e7576141 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1766,7 +1766,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
- /* on AR93xx and newer, count = 0 will make the the chip send
+ /* on AR93xx and newer, count = 0 will make the chip send
* spectral samples endlessly. Check if this really was intended,
* and fix otherwise.
*/
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index a1f1127d7808..24cce9db3ce0 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -1609,7 +1609,7 @@ struct wcn36xx_hal_config_bss_params {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -1746,7 +1746,7 @@ struct wcn36xx_hal_config_bss_params_v1 {
/* HAL should update the existing BSS entry, if this flag is set.
* UMAC will set this flag in case of reassoc, where we want to
- * resue the the old BSSID and still return success 0 = Add, 1 =
+ * reuse the old BSSID and still return success 0 = Add, 1 =
* Update */
u8 action;
@@ -3736,10 +3736,10 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
/* success or failure */
u32 status;
- /* Length of the responce message */
+ /* Length of the response message */
u32 rsp_length;
- /* FIXME: Currently considering the the responce will be less than
+ /* FIXME: Currently considering that the response will be less than
* 100bytes */
u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
} __packed;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 369527e27689..d5132651847e 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3818,7 +3818,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
}
/*
- * Suspend the the MAC and update the slot timing
+ * Suspend the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index 81c4ea3c6958..be4f3ade1ae8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -191,7 +191,7 @@ enum iwl_tx_flags {
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, TX_CMD_SEC_*
- * @initial_rate_index: index into the the rate table for initial TX attempt.
+ * @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @key: security key
* @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
@@ -554,7 +554,7 @@ struct iwl_extended_beacon_notif {
/**
* enum iwl_dump_control - dump (flush) control flags
- * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
+ * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwl_dump_control {
diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
index e68a475e3071..56a34ac65cbe 100644
--- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c
@@ -88,7 +88,7 @@ u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
/*
* Maps the driver specific control channel position (relative to the center
- * freq) definitions to the the fw values
+ * freq) definitions to the fw values
*/
u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
{
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index 1fb329dc6744..8462076cf744 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -157,7 +157,7 @@ free_and_exit:
* This function is called when the 'fw_dump' file is opened for
* reading.
* This function dumps firmware memory in different files
- * (ex. DTCM, ITCM, SQRAM etc.) based on the the segments for
+ * (ex. DTCM, ITCM, SQRAM etc.) based on the segments for
* debugging.
*/
static ssize_t
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index d10320f89bc1..7dda52bfdaff 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -1044,7 +1044,7 @@ static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter,
/*
* This function decode sdio aggreation pkt.
*
- * Based on the the data block size and pkt_len,
+ * Based on the data block size and pkt_len,
* skb data will be decoded to few packets.
*/
static void mwifiex_deaggr_sdio_pkt(struct mwifiex_adapter *adapter,
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 8428858204a6..e1f05ad89d9e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -596,7 +596,7 @@ static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
* rsi_sdio_host_intf_read_pkt() - This function reads the packet
from the device.
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
* @length: Length of the data to be read from the device.
*
* Return: 0 on success, -1 on failure.
@@ -627,7 +627,7 @@ int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter,
* rsi_init_sdio_interface() - This function does init specific to SDIO.
*
* @adapter: Pointer to the adapter data structure.
- * @pkt: Pointer to the packet data to be read from the the device.
+ * @pkt: Pointer to the packet data to be read from the device.
*
* Return: 0 on success, -1 on failure.
*/
diff --git a/drivers/net/wireless/ti/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h
index 2bdec38699f4..bfe998947957 100644
--- a/drivers/net/wireless/ti/wl1251/acx.h
+++ b/drivers/net/wireless/ti/wl1251/acx.h
@@ -1243,7 +1243,7 @@ struct wl1251_acx_arp_filter {
u8 address[16]; /* The IP address used to filter ARP packets.
ARP packets that do not match this address are
dropped. When the IP Version is 4, the last 12
- bytes of the the address are ignored. */
+ bytes of the address are ignored. */
} __attribute__((packed));
struct wl1251_acx_ac_cfg {
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index bcb90e4888dd..c1dc11893cea 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -36,7 +36,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#define pr_fmt(fmt) "acpiphp_glue: " fmt
diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c
index 7dfef3ee5b53..40511e39cea5 100644
--- a/drivers/pcmcia/pxa2xx_hx4700.c
+++ b/drivers/pcmcia/pxa2xx_hx4700.c
@@ -33,7 +33,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/*
* IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
* The asic3 default IRQ type is level trigger low level detect, exactly
- * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+ * the signal present on GPIOD4_CF_nCD when a CF card is inserted.
* If the IRQ type is not changed, the asic3 interrupt handler will loop
* repeatedly because it is unable to clear the level trigger interrupt.
*/
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index a6a22054c0ba..ff28b7bce456 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1265,7 +1265,7 @@ static int nmk_gpio_probe(struct platform_device *dev)
platform_set_drvdata(dev, nmk_chip);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 2f797cb7e205..a3f00a93a6b0 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1632,7 +1632,7 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
/*
- * Let the generic code handle this edge IRQ, the the chained
+ * Let the generic code handle this edge IRQ, the chained
* handler will perform the actual work of handling the parent
* interrupt.
*/
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 9134e3d2d95e..f215c66ac0fc 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -302,8 +302,9 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
ret = power_supply_show_property(dev, attr, prop_buf);
if (ret == -ENODEV || ret == -ENODATA) {
- /* When a battery is absent, we expect -ENODEV. Don't abort;
- send the uevent with at least the the PRESENT=0 property */
+ /* When a battery is absent, we expect -ENODEV.
+ * Don't abort; send the uevent with at least
+ * the PRESENT=0 property */
ret = 0;
continue;
}
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index 28871cd7e3b5..f224020e14d8 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -122,7 +122,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
- * configurations, so we use the the first method there, stripping off
+ * configurations, so we use the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 3466d3cb7647..c40b7359ce63 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3519,7 +3519,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
if (!atomic_read(&queue->set_pci_flags_count)) {
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 9b3dd6ef6a0b..28a834c9e8b0 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -975,7 +975,7 @@ static void get_container_serial_callback(void *context, struct fib * fibptr)
VPDPage83Data.IdDescriptorType1.ProductId));
/* Convert to ascii based serial number.
- * The LSB is the the end.
+ * The LSB is at the end.
*/
for (i = 0; i < 8; i++) {
u8 temp =
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 2035b0d64351..e62a7346428a 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1983,7 +1983,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
/*
* Device's PID has changed. We need to cleanup
* and re-login. If there is another device with
- * the the newly discovered pid, send an scn notice
+ * the newly discovered pid, send an scn notice
* so that its new pid can be discovered.
*/
list_for_each(qe, &rport->port->rport_q) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index ec193a8357d7..8dd83bca7d8f 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -511,7 +511,7 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
* @skb: The receive skb
* @netdev: The associated net device
* @ptype: The packet_type structure which was used to register this handler
- * @orig_dev: The original net_device the the skb was received on.
+ * @orig_dev: The original net_device that the skb was received on.
* (in case dev is a bond)
*
* Returns: 0 for success
@@ -2725,7 +2725,7 @@ module_exit(fcoe_exit);
* fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
* @seq: active sequence in the FLOGI or FDISC exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
@@ -2754,7 +2754,7 @@ done:
* fcoe_logo_resp() - FCoE specific LOGO response handler
* @seq: active sequence in the LOGO exchange
* @fp: response frame, or error encoded in a pointer (timeout)
- * @arg: pointer the the fcoe_ctlr structure
+ * @arg: pointer to the fcoe_ctlr structure
*
* This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 34a1b1f333b4..65a53a9eb059 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -213,7 +213,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new)
* that doesn't have a priv (fcf was deleted). However,
* libfcoe will always delete FCFs before trying to add
* them. This is ensured because both recv_adv and
- * age_fcfs are protected by the the fcoe_ctlr's mutex.
+ * age_fcfs are protected by the fcoe_ctlr's mutex.
* This means that we should never get a FCF with a
* non-NULL priv pointer.
*/
@@ -694,7 +694,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
*
* The caller must check that the length is a multiple of 4.
* The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
- * The the skb must also be an fc_frame.
+ * The skb must also be an fc_frame.
*
* This is called from the lower-level driver with spinlocks held,
* so we must not take a mutex here.
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 22a9bb1abae1..025ec5c10978 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -244,7 +244,7 @@ enum sci_controller_states {
SCIC_INITIALIZED,
/**
- * This state indicates the the controller is in the process of becoming
+ * This state indicates that the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 47a013fffae7..07af745220eb 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete(
* permitted. This state is entered from the INITIAL state. This state
* is entered from the STOPPING state.
*
- * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * @SCI_DEV_STARTING: This state indicates that the remote device is in
* the process of becoming ready (i.e. starting). In this state no new
* IO operations are permitted. This state is entered from the STOPPED
* state.
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
index c7ee81d01125..f22950b12b8b 100644
--- a/drivers/scsi/isci/remote_node_context.h
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state {
/**
* struct sci_remote_node_context - This structure contains the data
* associated with the remote node context object. The remote node context
- * (RNC) object models the the remote device information necessary to manage
+ * (RNC) object models the remote device information necessary to manage
* the silicon RNC.
*/
struct sci_remote_node_context {
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 6dcaed0c1fc8..53f17367fd71 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -67,7 +67,7 @@
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
-* @ihost: host on which the the request was queued
+* @ihost: host on which the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index d65bd178d131..61dc552a2097 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1685,7 +1685,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
@@ -1718,7 +1718,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
@@ -1851,7 +1851,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
@@ -1883,7 +1883,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 851e8efe364e..c4a37ee39a6b 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5822,7 +5822,7 @@ reject_out:
* @rrq: Pointer to the rrq struct.
*
* Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful, the completion handler will clear the RRQ.
*
* Return codes
* 0 - Successfully sent rrq els iocb.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 2500f15d437f..b2997a427b82 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2040,7 +2040,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
* @phba: pointer to lpfc hba data structure.
* @fcf_index the index of the fcf record to update
* This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so that the round robin selection for the particular priority level
* will try a different fcf record that does not have this bit set.
* If the fcf record is re-read for any reason this flag is cleared brfore
* adding it to the priority list.
@@ -5790,7 +5790,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
}
/* This routine decrements the reference count for a ndlp structure. If the
- * count goes to 0, this indicates the the associated nodelist should be
+ * count goes to 0, this indicates that the associated nodelist should be
* freed. Returning 1 indicates the ndlp resource has been released; on the
* other hand, returning 0 indicates the ndlp resource has not been released
* yet.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index e8c8c1ecc1f5..ebf956761d12 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3972,7 +3972,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
bf_set(lpfc_mbx_read_top_link_spd, la,
lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
- /* Fake the the following irrelvant fields */
+ /* Fake the following irrelevant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
bf_set(lpfc_mbx_read_top_il, la, 0);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 816f596cda60..fe2856ee2db8 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2265,7 +2265,7 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
* information via a READ_FCF mailbox command. This mailbox command also is used
* to indicate where received unsolicited frames from this FCF will be sent. By
* default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * that the RQ ID passed in the @phba. This can be overridden by the caller for
* more complicated setups.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 56f73682d4bd..5b6bb7132703 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -16787,7 +16787,7 @@ out:
* the offset after the write object mailbox has completed. @size is used to
* determine the end of the object and whether the eof bit should be set.
*
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
* for the next write.
* Return negative value for error cases.
**/
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 96dcc097a463..bea660c7fba6 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3220,7 +3220,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
*
* when HBA driver received the identify done event or initiate FIS received
* event(for SATA), it will invoke this function to notify the sas layer that
- * the sas toplogy has formed, please discover the the whole sas domain,
+ * the sas toplogy has formed, please discover the whole sas domain,
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 54fb984a3e17..87d239240463 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -354,7 +354,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
{
/*
* On all 4xx PPC's the SPI bus is shared/multiplexed with
- * the 2nd I2C bus. We need to enable the the SPI bus before
+ * the 2nd I2C bus. We need to enable the SPI bus before
* using it.
*/
diff --git a/drivers/staging/iio/magnetometer/hmc5843_core.c b/drivers/staging/iio/magnetometer/hmc5843_core.c
index fffca3a9f637..3af540417a8b 100644
--- a/drivers/staging/iio/magnetometer/hmc5843_core.c
+++ b/drivers/staging/iio/magnetometer/hmc5843_core.c
@@ -1,5 +1,5 @@
/*
- * Device driver for the the HMC5843 multi-chip module designed
+ * Device driver for the HMC5843 multi-chip module designed
* for low field magnetic sensing.
*
* Copyright (C) 2010 Texas Instruments
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 9fbb53d8c6bf..a476a9f8fac0 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -920,7 +920,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
int i;
struct ieee80211_rxb *rxb = NULL;
- // cheat the the hdr type
+ /* cheat the hdr type */
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
diff --git a/drivers/staging/rtl8723au/core/rtw_cmd.c b/drivers/staging/rtl8723au/core/rtw_cmd.c
index 46aea16cbf78..408888ea6f5c 100644
--- a/drivers/staging/rtl8723au/core/rtw_cmd.c
+++ b/drivers/staging/rtl8723au/core/rtw_cmd.c
@@ -507,7 +507,7 @@ int rtw_joinbss_cmd23a(struct rtw_adapter *padapter,
psecnetwork->IELength = 0;
/* Added by Albert 2009/02/18 */
- /* If the the driver wants to use the bssid to create the
+ /* If the driver wants to use the bssid to create the
* connection. If not, we have to copy the connecting AP's
* MAC address to it so that the driver just has the bssid
* information for PMKIDList searching. */
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 75cbde1f7c5b..caa782ca2456 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -409,7 +409,7 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd)
} else {
/*
* Extract the RELATIVE TARGET PORT IDENTIFIER to identify
- * the Target Port in question for the the incoming
+ * the Target Port in question for the incoming
* SET_TARGET_PORT_GROUPS op.
*/
rtpi = get_unaligned_be16(ptr + 2);
diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h
index ba87d6e731dd..1a4ba247f160 100644
--- a/drivers/thunderbolt/ctl.h
+++ b/drivers/thunderbolt/ctl.h
@@ -44,7 +44,7 @@ struct tb_cfg_result {
* If err = 1 then this is the port that send the
* error.
* If err = 0 and if this was a cfg_read/write then
- * this is the the upstream port of the responding
+ * this is the upstream port of the responding
* switch.
* Otherwise the field is set to zero.
*/
diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
index 8902f9b4df71..c1bcc11633f1 100644
--- a/drivers/tty/hvc/Kconfig
+++ b/drivers/tty/hvc/Kconfig
@@ -101,7 +101,7 @@ config HVC_BFIN_JTAG
select HVC_DRIVER
help
This console uses the Blackfin JTAG to create a console under the
- the HVC driver. If you don't have JTAG, then you probably don't
+ HVC driver. If you don't have JTAG, then you probably don't
want this option.
config HVCS
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index fc1fd403973a..0a5fb52f6d4a 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -314,8 +314,7 @@ static const int hrsl_to_error[] = {
/*
* See http://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a
- * reasonable overview of how control transfers use the the IN/OUT
- * tokens.
+ * reasonable overview of how control transfers use the IN/OUT tokens.
*/
#define MAX3421_HXFR_BULK_IN(ep) (0x00 | (ep)) /* bulk or interrupt */
#define MAX3421_HXFR_SETUP 0x10
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index f5397a517c54..9a380d2755e3 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1610,7 +1610,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
- * RExit to a disconnect state). If so, let the the driver know it's
+ * RExit to a disconnect state). If so, let the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED(temp) &&
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 01bf53392819..1b99a08ca2de 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -261,7 +261,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
* Cypress app note that describes this mechanism
- * states the the low-speed part can't handle more
+ * states that the low-speed part can't handle more
* than 800 bytes/sec, in which case 4800 baud is the
* safest speed for a part like that.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 4f70df33975a..fe5e40b8141a 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -429,7 +429,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
}
/*
- * This is the the common top part of all parallel port callback operations that
+ * This is the common top part of all parallel port callback operations that
* send synchronous messages to the device. This implements convoluted locking
* that avoids two scenarios: (1) a port operation is called after usbserial
* has called our release function, at which point struct mos7715_parport has
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 3f4f5fbded55..fe4447f3f2ea 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -46,7 +46,7 @@
*
* ASSUMPTIONS:
*
- * - We use the the as device address the port number where it is
+ * - We use as device address the port number where it is
* connected (port 0 doesn't exist). For unauth, it is 128 + that.
*
* ROADMAP:
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
index b7d4f6b75eef..caa4cb40334d 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/uwb/drp-ie.c
@@ -262,7 +262,7 @@ int uwb_drp_ie_update(struct uwb_rsv *rsv)
* We are given a zone id and the MAS bitmap of bits that need to be set in
* this zone. Note that this zone may already have bits set and this only
* adds settings - we cannot simply assign the MAS bitmap contents to the
- * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * zone contents. We iterate over the bits (MAS) in the zone and set the
* bits that are set in the given MAS bitmap.
*/
static
diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
index d4e7684e7045..501bc08dc125 100644
--- a/drivers/video/fbdev/omap/sossi.c
+++ b/drivers/video/fbdev/omap/sossi.c
@@ -370,7 +370,7 @@ static void sossi_set_bits_per_cycle(int bpc)
int bus_pick_count, bus_pick_width;
/*
- * We set explicitly the the bus_pick_count as well, although
+ * We set explicitly the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
diff --git a/drivers/video/fbdev/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c
index ceb434c95c0d..9177b8056356 100644
--- a/drivers/video/fbdev/sis/sis_accel.c
+++ b/drivers/video/fbdev/sis/sis_accel.c
@@ -215,7 +215,7 @@ SiS310SubsequentScreenToScreenCopy(struct sis_video_info *ivideo, int src_x, int
* and destination blitting areas overlap and
* adapt the bitmap addresses synchronously
* if the coordinates exceed the valid range.
- * The the areas do not overlap, we do our
+ * If the areas do not overlap, we do our
* normal check.
*/
if((mymax - mymin) < height) {
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index ac7d921ed984..b3179b482529 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -511,7 +511,7 @@ static int autofs_dev_ioctl_askumount(struct file *fp,
* located path is the root of a mount we return 1 along with
* the super magic of the mount or 0 otherwise.
*
- * In both cases the the device number (as returned by
+ * In both cases the device number (as returned by
* new_encode_dev()) is also returned.
*/
static int autofs_dev_ioctl_ismountpoint(struct file *fp,
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index 5ec03d999c37..b7173d53ca8b 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -854,7 +854,7 @@ int btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace)
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
- * not called and the the filesystem is remounted
+ * not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancelation is wanted.
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index d6033f540cc7..141ab13a538c 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -3555,7 +3555,7 @@ verbose_printk("btrfs: process_recorded_refs %llu\n", sctx->cur_ino);
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
- * the the current inum. To handle this case, we create the
+ * than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index c5b8ba37f88e..8f22f791cff9 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2710,7 +2710,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
mutex_unlock(&log_root_tree->log_mutex);
/*
- * nobody else is going to jump in and write the the ctree
+ * nobody else is going to jump in and write the ctree
* super here because the log_commit atomic below is protecting
* us. We must be called with a transaction handle pinning
* the running transaction open, so a full commit can't hop
diff --git a/fs/dcache.c b/fs/dcache.c
index 656ce522a218..3d4f029c6ce0 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -2042,8 +2042,8 @@ EXPORT_SYMBOL(d_obtain_root);
* same inode, only the actual correct case is stored in the dcache for
* case-insensitive filesystems.
*
- * For a case-insensitive lookup match and if the the case-exact dentry
- * already exists in in the dcache, use it and return it.
+ * For a case-insensitive lookup match and if the case-exact dentry
+ * already exists in the dcache, use it and return it.
*
* If no entry exists with the exact case name, allocate new dentry with
* the exact case, and return the spliced entry.
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 6bd67e2011f0..70a39a6e0bc7 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -899,7 +899,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack {
* @filename: This function kmalloc's the memory for the filename
* @filename_size: This function sets this to the amount of memory
* kmalloc'd for the filename
- * @packet_size: This function sets this to the the number of octets
+ * @packet_size: This function sets this to the number of octets
* in the packet parsed
* @mount_crypt_stat: The mount-wide cryptographic context
* @data: The memory location containing the start of the tag 70
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index 8d15febd0aa3..3c4bdea67343 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -51,7 +51,7 @@ struct ext2_block_alloc_info {
/*
* Was i_next_alloc_goal in ext2_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it is the physical block number of the block which was most-recently
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index feb2cafbeace..8999acdd830d 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -273,7 +273,7 @@ static int ext4_create_inline_data(handle_t *handle,
len = 0;
}
- /* Insert the the xttr entry. */
+ /* Insert the xttr entry. */
i.value = value;
i.value_len = len;
@@ -836,7 +836,7 @@ out:
/*
* Prepare the write for the inline data.
- * If the the data can be written into the inode, we just read
+ * If the data can be written into the inode, we just read
* the page and make it uptodate, and start the journal.
* Otherwise read the page, makes it dirty so that it can be
* handle in writepages(the i_disksize update is left to the
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index 85d7fa7514b2..e3fa631beb74 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -158,7 +158,7 @@ struct seg_entry {
unsigned short valid_blocks; /* # of valid blocks */
unsigned char *cur_valid_map; /* validity bitmap of blocks */
/*
- * # of valid blocks and the validity bitmap stored in the the last
+ * # of valid blocks and the validity bitmap stored in the last
* checkpoint pack. This information is used by the SSR mode.
*/
unsigned short ckpt_valid_blocks;
diff --git a/fs/kernfs/file.c b/fs/kernfs/file.c
index 2bacb9988566..5a46b04f071a 100644
--- a/fs/kernfs/file.c
+++ b/fs/kernfs/file.c
@@ -264,7 +264,7 @@ static ssize_t kernfs_fop_read(struct file *file, char __user *user_buf,
* There is no easy way for us to know if userspace is only doing a partial
* write, so we don't support them. We expect the entire buffer to come on
* the first write. Hint: if you're writing a value, first read the file,
- * modify only the the value you're changing, then write entire buffer
+ * modify only the value you're changing, then write entire buffer
* back.
*/
static ssize_t kernfs_fop_write(struct file *file, const char __user *user_buf,
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 857bbbcd39f3..51125321f21a 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -690,7 +690,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb,
/*
* Under certain conditions, the window slide code
* might have reduced the number of bits available or
- * disabled the the local alloc entirely. Re-check
+ * disabled the local alloc entirely. Re-check
* here and return -ENOSPC if necessary.
*/
status = -ENOSPC;
diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c
index b97359ba2648..e05c80d4705d 100644
--- a/fs/xfs/xfs_export.c
+++ b/fs/xfs/xfs_export.c
@@ -71,7 +71,7 @@ xfs_fs_encode_fh(
fileid_type = FILEID_INO32_GEN_PARENT;
/*
- * If the the filesystem may contain 64bit inode numbers, we need
+ * If the filesystem may contain 64bit inode numbers, we need
* to use larger file handles that can represent them.
*
* While we only allocate inodes that do not fit into 32 bits any
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index 26bb55e9e8b6..37cdb83e1e24 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -120,7 +120,7 @@ static inline int drm_rect_height(const struct drm_rect *r)
}
/**
- * drm_rect_visible - determine if the the rectangle is visible
+ * drm_rect_visible - determine if the rectangle is visible
* @r: rectangle whose visibility is returned
*
* RETURNS:
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index b9c7897dc566..c871164f6c89 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -2056,7 +2056,7 @@ enum ieee80211_tdls_actioncode {
*/
#define WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING BIT(2)
-/* TDLS capabilities in the the 4th byte of @WLAN_EID_EXT_CAPABILITY */
+/* TDLS capabilities in the 4th byte of @WLAN_EID_EXT_CAPABILITY */
#define WLAN_EXT_CAPA4_TDLS_BUFFER_STA BIT(4)
#define WLAN_EXT_CAPA4_TDLS_PEER_PSM BIT(5)
#define WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH BIT(6)
diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h
index d5b5f76d57ef..91c32b80c6d1 100644
--- a/include/linux/mic_bus.h
+++ b/include/linux/mic_bus.h
@@ -17,7 +17,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ include/linux/virtio.h.
*/
#ifndef _MIC_BUS_H_
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 8b086070c3a5..216390d7aaa9 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -213,7 +213,7 @@ extern pgprot_t protection_map[16];
#define FAULT_FLAG_USER 0x40 /* The fault originated in userspace */
/*
- * vm_fault is filled by the the pagefault handler and passed to the vma's
+ * vm_fault is filled by the pagefault handler and passed to the vma's
* ->fault function. The vma's ->fault is responsible for returning a bitmask
* of VM_FAULT_xxx flags that give details about how the fault was handled.
*
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 1c9effa25e26..85a8edc122bf 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -106,7 +106,7 @@ struct kparam_array
* ".") the kernel commandline parameter. Note that - is changed to _, so
* the user can use "foo-bar=1" even for variable "foo_bar".
*
- * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * @perm is 0 if the variable is not to appear in sysfs, or 0444
* for world-readable, 0644 for root-writable, etc. Note that if it
* is writable, you may need to use kparam_block_sysfs_write() around
* accesses (esp. charp, which can be kfreed when it changes).
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 0991259643d6..300289fe21a1 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2865,7 +2865,7 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
* must call this function to return the skb back to the stack, with
* or without a timestamp.
*
- * @skb: clone of the the original outgoing packet
+ * @skb: clone of the original outgoing packet
* @hwtstamps: hardware time stamps, may be NULL if not available
*
*/
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 5beeb8744fd1..e51a94b97b30 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -412,10 +412,10 @@ struct v4l2_subdev_sensor_ops {
/*
[rt]x_g_parameters: Get the current operating parameters and state of the
- the IR receiver or transmitter.
+ IR receiver or transmitter.
[rt]x_s_parameters: Set the current operating parameters and state of the
- the IR receiver or transmitter. It is recommended to call
+ IR receiver or transmitter. It is recommended to call
[rt]x_g_parameters first to fill out the current state, and only change
the fields that need to be changed. Upon return, the actual device
operating parameters and state will be returned. Note that hardware
diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h
index 94e5ed64dc6d..e9a8d524ab06 100644
--- a/include/net/caif/caif_layer.h
+++ b/include/net/caif/caif_layer.h
@@ -184,7 +184,7 @@ struct cflayer {
* CAIF packet downwards in the stack.
* Packet handling rules:
* - The CAIF packet (cfpkt) ownership is passed to the
- * transmit function. This means that the the packet
+ * transmit function. This means that the packet
* cannot be accessed after passing it to the below
* layer using dn->transmit().
*
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 20e80fa7bbdd..a99fdfcc894d 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -105,7 +105,7 @@ struct rt6_info {
struct in6_addr rt6i_gateway;
/* Multipath routes:
- * siblings is a list of rt6_info that have the the same metric/weight,
+ * siblings is a list of rt6_info that have the same metric/weight,
* destination, but not the same gateway. nsiblings is just a cache
* to speed up lookup.
*/
diff --git a/include/net/wimax.h b/include/net/wimax.h
index c52b68577cb0..c9705a3eb3b7 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -43,7 +43,7 @@
*
* USAGE
*
- * Embed a `struct wimax_dev` at the beginning of the the device's
+ * Embed a `struct wimax_dev` at the beginning of the device's
* private structure, initialize and register it. For details, see
* `struct wimax_dev`s documentation.
*
diff --git a/include/uapi/asm-generic/fcntl.h b/include/uapi/asm-generic/fcntl.h
index e063effe0cc1..04616a36f82a 100644
--- a/include/uapi/asm-generic/fcntl.h
+++ b/include/uapi/asm-generic/fcntl.h
@@ -142,7 +142,7 @@
* record locks, but are "owned" by the open file description, not the
* process. This means that they are inherited across fork() like BSD (flock)
* locks, and they are only released automatically when the last reference to
- * the the open file against which they were acquired is put.
+ * the open file against which they were acquired is put.
*/
#define F_OFD_GETLK 36
#define F_OFD_SETLK 37
diff --git a/include/uapi/linux/android/binder.h b/include/uapi/linux/android/binder.h
index 41420e341e75..92d7f52ddb10 100644
--- a/include/uapi/linux/android/binder.h
+++ b/include/uapi/linux/android/binder.h
@@ -266,7 +266,7 @@ enum binder_driver_return_protocol {
BR_FAILED_REPLY = _IO('r', 17),
/*
- * The the last transaction (either a bcTRANSACTION or
+ * The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
};
diff --git a/init/Kconfig b/init/Kconfig
index dc24dec60232..5397983bc85c 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -876,8 +876,8 @@ config LOG_CPU_MAX_BUF_SHIFT
used as it forces an exact (power of two) size of the ring buffer.
The number of possible CPUs is used for this computation ignoring
- hotplugging making the compuation optimal for the the worst case
- scenerio while allowing a simple algorithm to be used from bootup.
+ hotplugging making the computation optimal for the worst case
+ scenario while allowing a simple algorithm to be used from bootup.
Examples shift values and their meaning:
17 => 128 KB for each CPU
diff --git a/init/main.c b/init/main.c
index 2115055faeac..683d230aa564 100644
--- a/init/main.c
+++ b/init/main.c
@@ -504,7 +504,7 @@ asmlinkage __visible void __init start_kernel(void)
debug_objects_early_init();
/*
- * Set up the the initial canary ASAP:
+ * Set up the initial canary ASAP:
*/
boot_init_stack_canary();
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 9019f15deab2..6e82ca9e2735 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -17,7 +17,7 @@
#ifdef HAVE_JUMP_LABEL
-/* mutex to protect coming/going of the the jump_label table */
+/* mutex to protect coming/going of the jump_label table */
static DEFINE_MUTEX(jump_label_mutex);
void jump_label_lock(void)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 879edfc5ee52..c28d374307b1 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2897,7 +2897,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
- * with as many of the the *youngest* kmsg records that fit into it.
+ * with as many of the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
diff --git a/kernel/smp.c b/kernel/smp.c
index 07854477c164..1af465316b19 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -641,7 +641,7 @@ EXPORT_SYMBOL(on_each_cpu_mask);
* for all the required CPUs to finish. This may include the local
* processor.
* @cond_func: A callback function that is passed a cpu id and
- * the the info parameter. The function is called
+ * the info parameter. The function is called
* with preemption disabled. The function should
* return a blooean value indicating whether to IPI
* the specified CPU.
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 946acb72179f..71c3e019103a 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -143,7 +143,7 @@ static void timekeeping_check_update(struct timekeeper *tk, cycle_t offset)
printk_deferred(" timekeeping: Your kernel is sick, but tries to cope by capping time updates\n");
} else {
if (offset > (max_cycles >> 1)) {
- printk_deferred("INFO: timekeeping: Cycle offset (%lld) is larger than the the '%s' clock's 50%% safety margin (%lld)\n",
+ printk_deferred("INFO: timekeeping: Cycle offset (%lld) is larger than the '%s' clock's 50%% safety margin (%lld)\n",
offset, name, max_cycles >> 1);
printk_deferred(" timekeeping: Your kernel is still fine, but is feeling a bit nervous\n");
}
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 0315d43176d8..c30179b361b0 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2929,7 +2929,7 @@ rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
* This function lets the user discard an event in the ring buffer
* and then that event will not be read later.
*
- * This function only works if it is called before the the item has been
+ * This function only works if it is called before the item has been
* committed. It will try to free the event from the ring buffer
* if another event has not been added behind it.
*
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 17670573dda8..d642228e5c3b 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -827,7 +827,7 @@ config PANIC_TIMEOUT
int "panic timeout"
default 0
help
- Set the timeout value (in seconds) until a reboot occurs when the
+ Set the timeout value (in seconds) until a reboot occurs when
the kernel panics. If n = 0, then we wait forever. A timeout
value n > 0 will wait n seconds before rebooting, while a timeout
value n < 0 will reboot immediately.
diff --git a/lib/dynamic_queue_limits.c b/lib/dynamic_queue_limits.c
index f346715e2255..3b9f82164f7d 100644
--- a/lib/dynamic_queue_limits.c
+++ b/lib/dynamic_queue_limits.c
@@ -60,7 +60,7 @@ void dql_completed(struct dql *dql, unsigned int count)
* the whole interval (the check above).
*
* If there is slack, the amount of execess data queued above
- * the the amount needed to prevent starvation, the queue limit
+ * the amount needed to prevent starvation, the queue limit
* can be decreased. To avoid hysteresis we consider the
* minimum amount of slack found over several iterations of the
* completion routine.
diff --git a/lib/earlycpio.c b/lib/earlycpio.c
index 3eb3e4722b8e..9d4da0a6a6ed 100644
--- a/lib/earlycpio.c
+++ b/lib/earlycpio.c
@@ -50,7 +50,7 @@ enum cpio_fields {
/**
* cpio_data find_cpio_data - Search for files in an uncompressed cpio
* @path: The directory to search for, including a slash at the end
- * @data: Pointer to the the cpio archive or a header inside
+ * @data: Pointer to the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @nextoff: When a matching file is found, this is the offset from the
* beginning of the cpio to the beginning of the next file, not the
diff --git a/lib/syscall.c b/lib/syscall.c
index e30e03932480..624d80430969 100644
--- a/lib/syscall.c
+++ b/lib/syscall.c
@@ -31,7 +31,7 @@ static int collect_syscall(struct task_struct *target, long *callno,
* @pc: filled with user PC
*
* If @target is blocked in a system call, returns zero with *@callno
- * set to the the call's number and @args filled in with its arguments.
+ * set to the call's number and @args filled in with its arguments.
* Registers not used for system call arguments may not be available and
* it is not kosher to use &struct user_regset calls while the system
* call is still in progress. Note we may get this result if @target
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 271e4432734c..d05f33efcf70 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1412,7 +1412,7 @@ static void return_unused_surplus_pages(struct hstate *h,
* evenly across all nodes with memory. Iterate across these nodes
* until we can no longer free unreserved surplus pages. This occurs
* when the nodes with surplus pages have no free pages.
- * free_pool_huge_page() will balance the the freed pages across the
+ * free_pool_huge_page() will balance the freed pages across the
* on-line nodes with memory and will handle the hstate accounting.
*/
while (nr_pages--) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index ebffa0e4a9c0..33c34fb38700 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4294,7 +4294,7 @@ static int zone_batchsize(struct zone *zone)
* locking.
*
* Any new users of pcp->batch and pcp->high should ensure they can cope with
- * those fields changing asynchronously (acording the the above rule).
+ * those fields changing asynchronously (according to the above rule).
*
* mutex_is_locked(&pcp_batch_high_lock) required when calling this function
* outside of boot time (or some other assurance that no concurrent updaters
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index ee5e59839b02..f0de3d20e304 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -993,7 +993,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
return 0;
}
-/* Encrypt the the link */
+/* Encrypt the link */
static void hci_conn_encrypt(struct hci_conn *conn)
{
BT_DBG("hcon %p", conn);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 476709bd068a..342ef7fbccbf 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -801,7 +801,7 @@ static void hci_init4_req(struct hci_request *req, unsigned long opt)
* Delete Stored Link Key command. They are clearly indicating its
* absence in the bit mask of supported commands.
*
- * Check the supported commands and only if the the command is marked
+ * Check the supported commands and only if the command is marked
* as supported send it. If not supported assume that the controller
* does not have actual support for stored link keys which makes this
* command redundant anyway.
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index f3bad41d725f..2de5e4914bc1 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -113,7 +113,7 @@ int eth_header(struct sk_buff *skb, struct net_device *dev,
EXPORT_SYMBOL(eth_header);
/**
- * eth_get_headlen - determine the the length of header for an ethernet frame
+ * eth_get_headlen - determine the length of header for an ethernet frame
* @data: pointer to start of frame
* @len: total length of frame
*
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 197c3f59ecbf..545f842eb4ab 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1347,7 +1347,7 @@ static void sctp_select_active_and_retran_path(struct sctp_association *asoc)
}
/* We did not find anything useful for a possible retransmission
- * path; either primary path that we found is the the same as
+ * path; either primary path that we found is the same as
* the current one, or we didn't generally find an active one.
*/
if (trans_sec == NULL)
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index a3380917f197..a31060a7f3cc 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -200,7 +200,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc,
sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3;
max = asoc->frag_point;
- /* If the the peer requested that we authenticate DATA chunks
+ /* If the peer requested that we authenticate DATA chunks
* we need to account for bundling of the AUTH chunks along with
* DATA.
*/
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 41248b1820c7..507ee9d91bd1 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -190,7 +190,7 @@ void rpc_destroy_generic_auth(void)
}
/*
- * Test the the current time (now) against the underlying credential key expiry
+ * Test the current time (now) against the underlying credential key expiry
* minus a timeout and setup notification.
*
* The normal case:
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 7d730543f243..53d5e7a8753b 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
* @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
* %WIMAX_RF_OFF radio off.
*
- * Reports changes in the software RF switch state to the the WiMAX
+ * Reports changes in the software RF switch state to the WiMAX
* stack.
*
* The main use is during initialization, so the driver can query the
diff --git a/scripts/coccinelle/misc/badty.cocci b/scripts/coccinelle/misc/badty.cocci
index 2fc06fc71927..7bde383f577b 100644
--- a/scripts/coccinelle/misc/badty.cocci
+++ b/scripts/coccinelle/misc/badty.cocci
@@ -3,7 +3,7 @@
//# This makes an effort to find cases where the argument to sizeof is wrong
//# in memory allocation functions by checking the type of the allocated memory
//# when it is a double pointer and ensuring the sizeof argument takes a pointer
-//# to the the memory being allocated. There are false positives in cases the
+//# to the memory being allocated. There are false positives in cases the
//# sizeof argument is not used in constructing the return value. The result
//# may need some reformatting.
//
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index db40fa04cd51..9eb8c74b69a1 100755
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in
kernel/trace/trace_functions.c
The resulted trace is processed into a tree to produce a more human
view of the call stack by drawing textual but hierarchical tree of
-calls. Only the functions's names and the the call time are provided.
+calls. Only the functions's names and the call time are provided.
Usage:
Be sure that you have CONFIG_FUNCTION_TRACER
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
index 3064c6ced87c..7b9769e7985a 100644
--- a/security/apparmor/context.c
+++ b/security/apparmor/context.c
@@ -13,7 +13,7 @@
* License.
*
*
- * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * AppArmor sets confinement on every task, via the aa_task_cxt and
* the aa_task_cxt.profile, both of which are required and are not allowed
* to be NULL. The aa_task_cxt is not reference counted and is unique
* to each cred (which is reference count). The profile pointed to by
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 0b9ec78a7a7a..9f7bba09a692 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -478,7 +478,7 @@ error:
* keyring, otherwise replace the link to the matching key with a link to the
* new key.
*
- * The key must grant the caller Link permission and the the keyring must grant
+ * The key must grant the caller Link permission and the keyring must grant
* the caller Write permission. Furthermore, if an additional link is created,
* the keyring's quota will be extended.
*
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index e70a7fb393dd..945cdd8aae87 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -3922,7 +3922,7 @@ EXPORT_SYMBOL_GPL(snd_hda_set_power_save);
* @nid: NID to check / update
*
* Check whether the given NID is in the amp list. If it's in the list,
- * check the current AMP status, and update the the power-status according
+ * check the current AMP status, and update the power-status according
* to the mute status.
*
* This function is supposed to be set or called from the check_power_status
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index 3d2597b7037b..a56718dafeea 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -822,7 +822,7 @@ static void activate_amp_in(struct hda_codec *codec, struct nid_path *path,
}
}
-/* sync power of each widget in the the given path */
+/* sync power of each widget in the given path */
static hda_nid_t path_power_update(struct hda_codec *codec,
struct nid_path *path,
bool allow_powerdown)
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 43c99ce4a520..f9052d0cd432 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -859,7 +859,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec,
static struct snd_kcontrol_new beep_vol_ctl =
HDA_CODEC_VOLUME(NULL, 0, 0, 0);
- /* check for mute support for the the amp */
+ /* check for mute support for the amp */
if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
const struct snd_kcontrol_new *temp;
if (spec->anabeep_nid == nid)
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index 3919aed39ca0..5e52086d7b98 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -31,7 +31,7 @@
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
- * sampling rate. That means the the FPGA doubles the
+ * sampling rate. That means that the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index 79552953e1bd..ec5624bf1e13 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -725,7 +725,7 @@ static void pll_factors(struct snd_soc_codec *codec,
u64 Kpart;
unsigned int K, Ndiv, Nmod, target;
- /* The the PLL output is always 98.304MHz. */
+ /* The PLL output is always 98.304MHz. */
target = 98304000;
/* If the input frequency is over 14.4MHz then scale it down. */
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index 93d7e56c6066..37100b38b377 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -157,7 +157,7 @@ static void fsl_dma_abort_stream(struct snd_pcm_substream *substream)
/**
* fsl_dma_update_pointers - update LD pointers to point to the next period
*
- * As each period is completed, this function changes the the link
+ * As each period is completed, this function changes the link
* descriptor pointers for that period to point to the next period.
*/
static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private)
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index 0190cb6332f2..635b5cc6b56d 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -615,7 +615,7 @@ A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. The DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index d1deb573877f..11e718d6510c 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -204,7 +204,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as:
- period being the hist entry period value
- - WEIGHT-A/WEIGHT-B being user supplied weights in the the '-c' option
+ - WEIGHT-A/WEIGHT-B being user supplied weights in the '-c' option
behind ':' separator like '-c wdiff:1,2'.
- WEIGHT-A being the weight of the data file
- WEIGHT-B being the weight of the baseline data file
diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
index fd7e9e9d6f4a..1aa7faa0e0e0 100644
--- a/tools/thermal/tmon/pid.c
+++ b/tools/thermal/tmon/pid.c
@@ -38,7 +38,7 @@
/**************************************************************************
* PID (Proportional-Integral-Derivative) controller is commonly used in
- * linear control system, consider the the process.
+ * linear control system, consider the process.
* G(s) = U(s)/E(s)
* kp = proportional gain
* ki = integral gain
--
2.1.0
^ permalink raw reply related [flat|nested] 35+ messages in thread
end of thread, other threads:[~2015-04-20 5:03 UTC | newest]
Thread overview: 35+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-11-12 5:10 [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the " Michael Opdenacker
2013-11-12 8:32 ` Arend van Spriel
2013-11-13 9:27 ` Michael Opdenacker
2013-12-09 10:36 ` [PATCH][RESEND] [TRIVIAL] " Michael Opdenacker
2014-03-05 5:52 ` [PATCH] [RESEND][TRIVIAL] " Michael Opdenacker
2014-03-05 5:55 ` Michael Opdenacker
2014-03-11 12:25 ` Michael Opdenacker
2014-03-11 12:30 ` Michael Opdenacker
2014-10-01 9:53 ` Michael Opdenacker
2014-10-01 13:32 ` Joe Perches
2014-10-01 19:49 ` Michael Opdenacker
2014-10-01 19:54 ` Michael Opdenacker
2014-10-02 17:25 ` Randy Dunlap
2014-10-02 19:18 ` Michael Opdenacker
2014-10-02 19:24 ` Michael Opdenacker
2014-10-02 20:00 ` Randy Dunlap
2014-10-02 20:06 ` Joe Perches
2014-10-02 20:11 ` Michael Opdenacker
2014-10-02 20:13 ` Michael Opdenacker
2014-10-02 20:15 ` Michael Opdenacker
2014-10-02 22:37 ` Eduardo Valentin
2014-10-16 12:35 ` Michael Opdenacker
2014-10-16 12:39 ` Michael Opdenacker
2014-10-16 19:38 ` Michael Opdenacker
2014-10-16 19:42 ` Michael Opdenacker
2015-03-27 1:55 ` Michael Opdenacker
2015-03-27 2:16 ` Michael Opdenacker
2015-03-27 9:34 ` Jiri Kosina
2015-04-20 4:55 ` Michael Opdenacker
2015-04-20 5:02 ` Michael Opdenacker
2015-03-27 2:23 ` Joe Perches
2015-03-27 2:52 ` Michael Opdenacker
2015-03-27 2:55 ` Michael Opdenacker
2014-10-02 20:07 ` Michael Opdenacker
2014-10-02 20:07 ` Michael Opdenacker
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.