All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sreekanth Reddy <sreekanth.reddy@avagotech.com>
To: jejb@kernel.org, hch@infradead.org
Cc: martin.petersen@oracle.com, linux-scsi@vger.kernel.org,
	JBottomley@Parallels.com, Sathya.Prakash@avagotech.com,
	kashyap.desai@avagotech.com, linux-kernel@vger.kernel.org,
	thenzl@redhat.com,
	Sreekanth Reddy <Sreekanth.Reddy@avagotech.com>
Subject: [PATCH 13/20] [SCSI] mpt3sas: MPI 2.5 Rev K (2.5.6) specifications
Date: Mon, 30 Mar 2015 19:25:16 +0530	[thread overview]
Message-ID: <1427723723-12676-14-git-send-email-Sreekanth.Reddy@avagotech.com> (raw)
In-Reply-To: <1427723723-12676-1-git-send-email-Sreekanth.Reddy@avagotech.com>

Below are the new changes to MPI 2.5 Rev K(2.5.6) specification and 2.00.35 header files
1) Added a minimum size requirement for target mode command buffers.
2) Added MinMSIxIndex and MaxMSIxIndex fields to CommandBufferPostBase Request.
3) For BIOS Page 1, added SSUTimeout field, and added Product Name String Format bits to the BiosOptions field

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com>
---
 drivers/scsi/mpt3sas/mpi/mpi2.h      |  5 +++--
 drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 17 ++++++++++++++---
 2 files changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
index c2d127c..ec27ad2 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
@@ -8,7 +8,7 @@
  *                 scatter/gather formats.
  * Creation Date:  June 21, 2006
  *
- * mpi2.h Version:  02.00.34
+ * mpi2.h Version:  02.00.35
  *
  * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
  *       prefix are for use only on MPI v2.5 products, and must not be used
@@ -91,6 +91,7 @@
  * 08-19-13  02.00.32  Bumped MPI2_HEADER_VERSION_UNIT.
  * 12-05-13  02.00.33  Bumped MPI2_HEADER_VERSION_UNIT.
  * 01-08-14  02.00.34  Bumped MPI2_HEADER_VERSION_UNIT
+ * 06-13-14  02.00.35  Bumped MPI2_HEADER_VERSION_UNIT.
  * --------------------------------------------------------------------------
  */
 
@@ -124,7 +125,7 @@
 #define MPI2_VERSION_02_05                  (0x0205)
 
 /*Unit and Dev versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT            (0x22)
+#define MPI2_HEADER_VERSION_UNIT            (0x23)
 #define MPI2_HEADER_VERSION_DEV             (0x00)
 #define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
 #define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index 66f2cc1..c337a85 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
  *         Title:  MPI Configuration messages and pages
  * Creation Date:  November 10, 2006
  *
- *   mpi2_cnfg.h Version:  02.00.28
+ *   mpi2_cnfg.h Version:  02.00.29
  *
  * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
  *       prefix are for use only on MPI v2.5 products, and must not be used
@@ -177,6 +177,8 @@
  *		       MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
  * 01-08-14  02.00.28  Added more defines for the BiosOptions field of
  *		       MPI2_CONFIG_PAGE_BIOS_1.
+ * 06-13-14  02.00.29  Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and
+ *		       more defines for the BiosOptions field..
  * --------------------------------------------------------------------------
  */
 
@@ -1324,7 +1326,9 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
 	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
 	U32                     BiosOptions;                /*0x04 */
 	U32                     IOCSettings;                /*0x08 */
-	U32                     Reserved1;                  /*0x0C */
+	U8                      SSUTimeout;                 /*0x0C */
+	U8                      Reserved1;                  /*0x0D */
+	U16                     Reserved2;                  /*0x0E */
 	U32                     DeviceSettings;             /*0x10 */
 	U16                     NumberOfDevices;            /*0x14 */
 	U16                     UEFIVersion;                /*0x16 */
@@ -1336,9 +1340,16 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
 	*PTR_MPI2_CONFIG_PAGE_BIOS_1,
 	Mpi2BiosPage1_t, *pMpi2BiosPage1_t;
 
-#define MPI2_BIOSPAGE1_PAGEVERSION                      (0x06)
+#define MPI2_BIOSPAGE1_PAGEVERSION                      (0x07)
 
 /*values for BIOS Page 1 BiosOptions field */
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK                         (0x00003800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL                        (0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE                   (0x00000800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID                        (0x00001000)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS                        (0x00001800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY                        (0x00002000)
+
 #define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS		    (0x00000400)
 
 #define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD	(0x00000300)
-- 
2.0.2


  parent reply	other threads:[~2015-03-30 13:56 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-30 13:55 [PATCH 00/20] mpt3sas: driver update Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 01/20] [SCSI] mpt3sas: Added Combined Reply Queue feature to extend up-to 96 MSIX vector support Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 02/20] [SCSI] mpt3sas: Get IOC_FACTS information using handshake protocol only after HBA card gets into READY or Operational state Sreekanth Reddy
2015-06-18 10:00   ` Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 03/20] [SCSI] mpt3sas: Added module parameter 'unblock_io' to unblock IO's during disk addition Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 04/20] [SCSI] mpt3sas: Remove redundancy code while freeing the controller resources Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 05/20] [SCSI] mpt3sas: MPI 2.5 Rev I (2.5.4) specifications Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 06/20] [SCSI] mpt3sas: Provides the physical location of sas drives Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 07/20] [SCSI] mpt3sas: Bump mpt3sas Driver version to v5.100.00.00 Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 08/20] [SCSI] mpt3sas: Update MPI2 strings to MPI2.5 Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 09/20] [SCSI] mpt3sas: MPI 2.5 Rev J (2.5.5) specification and 2.00.34 header files Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 10/20] [SCSI] mpt3sas: Add branding string support for OEM's HBA Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 11/20] [SCSI] mpt3sas: Add branding string support for OEM custom HBA Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 12/20] [SCSI] mpt3sas: Bump mpt3sas driver version to v6.100.00.00 Sreekanth Reddy
2015-03-30 13:55 ` Sreekanth Reddy [this message]
2015-03-30 13:55 ` [PATCH 14/20] [SCSI] mpt3sas: Complete the SCSI command with DID_RESET status for log_info value 0x0x32010081 Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 15/20] [SCSI] mpt3sas: Return host busy error status to SML when DMA mapping of scatter gather list fails for a SCSI command Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 16/20] [SCSI] mpt3sas: Added support for customer specific branding Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 17/20] [SCSI] mpt3sas: Use alloc_ordered_workqueue() API instead of create_singlethread_workqueue() API Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 18/20] [SCSI] mpt3sas: Call dma_mapping_error() API after mapping an address with dma_map_single() API Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 19/20] [SCSI] mpt3sas: When device is blocked followed by unblock fails, unfreeze the I/Os Sreekanth Reddy
2015-03-30 13:55 ` [PATCH 20/20] [SCSI] mpt3sas : Bump mpt3sas driver version to 9.100.00.00 Sreekanth Reddy
2015-04-05 16:09 ` [PATCH 00/20] mpt3sas: driver update Christoph Hellwig
2015-04-08  5:43   ` Sreekanth Reddy
2015-04-21 12:13     ` Christoph Hellwig
2015-04-24 21:27       ` Sathya Prakash
2015-06-12  9:42 Sreekanth Reddy
2015-06-12  9:42 ` [PATCH 13/20] [SCSI] mpt3sas: MPI 2.5 Rev K (2.5.6) specifications Sreekanth Reddy
2015-06-15  9:54   ` Johannes Thumshirn
2015-06-15  9:54     ` Johannes Thumshirn
2015-06-19 20:36   ` Martin K. Petersen
2015-06-19 20:36     ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1427723723-12676-14-git-send-email-Sreekanth.Reddy@avagotech.com \
    --to=sreekanth.reddy@avagotech.com \
    --cc=JBottomley@Parallels.com \
    --cc=Sathya.Prakash@avagotech.com \
    --cc=hch@infradead.org \
    --cc=jejb@kernel.org \
    --cc=kashyap.desai@avagotech.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=thenzl@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.