From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Frederic Danis To: linux-bluetooth@vger.kernel.org Subject: [RFC 5/5] Bluetooth: hci_uart: Add BCM specific UART speed management Date: Thu, 2 Apr 2015 16:37:36 +0200 Message-Id: <1427985456-31536-6-git-send-email-frederic.danis@linux.intel.com> In-Reply-To: <1427985456-31536-1-git-send-email-frederic.danis@linux.intel.com> References: <1427985456-31536-1-git-send-email-frederic.danis@linux.intel.com> Content-Type: text/plain; charset="utf-8" Sender: linux-bluetooth-owner@vger.kernel.org List-ID: This allows to setup the final speed for UART communication. This also allows to load firmware at final speed. Signed-off-by: Frederic Danis --- drivers/bluetooth/hci_bcm.c | 111 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 111 insertions(+) diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c index 7cec648..7501732 100644 --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c @@ -11,6 +11,7 @@ */ #include +#include #include #include #include @@ -20,6 +21,9 @@ #include "hci_uart.h" +#define BCM43XX_CLOCK_48 1 +#define BCM43XX_CLOCK_24 2 + static int hci_bcm_reset(struct hci_uart *hu) { struct hci_dev *hdev = hu->hdev; @@ -113,6 +117,87 @@ static int hci_bcm_read_local_version(struct hci_uart *hu, char *name, return 0; } +static int hci_bcm_set_clock(struct hci_uart *hu, unsigned char clock) +{ + struct hci_dev *hdev = hu->hdev; + struct sk_buff *skb; + + BT_DBG("%s: Set Controller clock (%d)", hdev->name, clock); + + skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: failed to write update clock command (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->data[0]) { + u8 evt_status = skb->data[0]; + + BT_ERR("%s: write update clock event failed (%02x)", + hdev->name, evt_status); + kfree_skb(skb); + return -bt_to_errno(evt_status); + } + + kfree_skb(skb); + + return 0; +} + +static int hci_bcm_set_speed(struct hci_uart *hu, uint32_t speed) +{ + struct hci_dev *hdev = hu->hdev; + struct sk_buff *skb; + unsigned char param[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + struct ktermios ktermios; + + if (speed > 3000000 && hci_bcm_set_clock(hu, BCM43XX_CLOCK_48)) + return -EINVAL; + + param[2] = (uint8_t) (speed); + param[3] = (uint8_t) (speed >> 8); + param[4] = (uint8_t) (speed >> 16); + param[5] = (uint8_t) (speed >> 24); + + BT_DBG("%s: Set Controller UART speed to %d bit/s", hdev->name, speed); + + skb = __hci_cmd_sync(hdev, 0xfc18, sizeof(param), param, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: failed to write update baudrate command (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->data[0]) { + u8 evt_status = skb->data[0]; + + BT_ERR("%s: write update baudrate event failed (%02x)", + hdev->name, evt_status); + kfree_skb(skb); + return -bt_to_errno(evt_status); + } + + kfree_skb(skb); + + if (!hu->tty) { + BT_ERR("%s: Can't set host baud rate", hdev->name); + return -EIO; + } + + ktermios = hu->tty->termios; + ktermios.c_cflag &= ~CBAUD; + ktermios.c_cflag |= BOTHER; + tty_termios_encode_baud_rate(&ktermios, speed, speed); + + tty_set_termios(hu->tty, &ktermios); + + BT_DBG("%s: New tty speed: %d", hdev->name, hu->tty->termios.c_ispeed); + + return 0; +} + static const struct firmware *hci_bcm_get_fw(struct hci_uart *hu, const char *fwname) { @@ -223,15 +308,41 @@ int hci_bcm_setup(struct hci_uart *hu) fw = hci_bcm_get_fw(hu, fwname); if (fw) { + struct ktermios ktermios; + speed_t init_speed = hu->tty->termios.c_ispeed; + + BT_DBG("%s: tty speed: %d", + hu->hdev->name, hu->tty->termios.c_ispeed); + + if (hu->speed) { + err = hci_bcm_set_speed(hu, hu->speed); + if (err) + goto failed; + } + err = hci_bcm_load_firmware(hu, fw); if (err) goto failed; + /* Controller speed has been reset to default speed */ + if (hu->speed) { + ktermios = hu->tty->termios; + tty_termios_encode_baud_rate(&ktermios, init_speed, + init_speed); + tty_set_termios(hu->tty, &ktermios); + + BT_DBG("%s: New tty speed: %d", + hu->hdev->name, hu->tty->termios.c_ispeed); + } + err = hci_bcm_reset(hu); if (err) goto failed; } + if (hu->speed) + err = hci_bcm_set_speed(hu, hu->speed); + failed: if (fw) release_firmware(fw); -- 1.9.1