[U-Boot] [PATCH 2/4] mtd: vf610_nfc: add Freescale NFC controller configs to Kconfig

[Stefan Agner <stefan@agner.ch>]

This commit allows users to enable/disable the Freescale NFC
controller found in systems like Vybrid (VF610), MPC5125, MCF54418
or Kinetis K70 via Kconfig with more detailed help docs.

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
 configs/vf610twr_defconfig |  2 ++
 drivers/mtd/nand/Kconfig   | 15 +++++++++++++++
 include/configs/vf610twr.h |  3 ---
 3 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig
index 7de374a..5e0ac9f 100644
--- a/configs/vf610twr_defconfig
+++ b/configs/vf610twr_defconfig
@@ -1,3 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_MMC"
 CONFIG_ARM=y
 CONFIG_TARGET_VF610TWR=y
+CONFIG_NAND_VF610_NFC=y
+CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 72825c3..8056c06 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -32,6 +32,21 @@ config NAND_DENALI_SPARE_AREA_SKIP_BYTES
 	  of OOB area before last ECC sector data starts.  This is potentially
 	  used to preserve the bad block marker in the OOB area.
 
+config NAND_VF610_NFC
+	bool "Support for Freescale NFC for VF610/MPC5125"
+	select SYS_NAND_SELF_INIT
+	help
+	  Enables support for NAND Flash Controller on some Freescale
+	  processors like the VF610, MPC5125, MCF54418 or Kinetis K70.
+	  The driver supports a maximum 2k page size. The driver
+	  currently does not support hardware ECC.
+
+config SYS_NAND_BUSWIDTH_16BIT
+	bool "Use 16-bit NAND interface"
+	depends on NAND_VF610_NFC
+	help
+	  Use 16-bit wide NAND flash interface.
+
 if SPL
 
 config SPL_NAND_DENALI
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 05bc7d0..621aa13 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -50,10 +50,7 @@
 #define CONFIG_CMD_NAND_TRIMFFS
 
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_VF610_NFC
-#define CONFIG_SYS_NAND_SELF_INIT
 #define CONFIG_USE_ARCH_MEMCPY
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR
 
-- 
2.3.5