* [PATCH v6 0/5] Display IO topology when PXM data is available (plus some cleanup)
@ 2015-04-06 22:12 Boris Ostrovsky
2015-04-06 22:12 ` [PATCH v6 1/5] sysctl: Make XEN_SYSCTL_numainfo a little more efficient Boris Ostrovsky
` (4 more replies)
0 siblings, 5 replies; 19+ messages in thread
From: Boris Ostrovsky @ 2015-04-06 22:12 UTC (permalink / raw)
To: ian.jackson, ian.campbell, wei.liu2, stefano.stabellini, dgdegra,
jbeulich, andrew.cooper3, keir
Cc: elena.ufimtseva, dario.faggioli, boris.ostrovsky, xen-devel
Changes in v6:
* PCI topology interface changes: no continuations, userspace will be dealing
with "unfinished" sysctl (patches 2 and 5)
* Unknown device will cause ENODEV in sysctl
* No NULL tests in libxc
* Loop control initialization fix (similar to commit 26da081ac91a)
* Other minor changes (see per-patch notes)
Changes in v5:
* Make CPU topology and NUMA info sysctls behave more like XEN_DOMCTL_get_vcpu_msrs
when passed NULL buffers. This required toolstack changes as well
* Don't use 8-bit data types in interfaces
* Fold interface version update into patch#3
Changes in v4:
* Split cputopology and NUMA info changes into separate patches
* Added patch#1 (partly because patch#4 needs to know when when distance is invalid,
i.e. NUMA_NO_DISTANCE)
* Split sysctl version update into a separate patch
* Other changes are listed in each patch
* NOTE: I did not test python's xc changes since I don't think I know how.
Changes in v3:
* Added patch #1 to more consistently define nodes as a u8 and properly
use NUMA_NO_NODE.
* Make changes to xen_sysctl_numainfo, similar to those made to
xen_sysctl_topologyinfo. (Q: I kept both sets of changes in the same
patch #3 to avoid bumping interface version twice. Perhaps it's better
to split it into two?)
* Instead of copying data for each loop index allocate a buffer and copy
once for all three queries in sysctl.c.
* Move hypercall buffer management from libxl to libxc (as requested by
Dario, patches #5 and #6).
* Report topology info for offlined CPUs as well
* Added LIBXL_HAVE_PCITOPO macro
Changes in v2:
* Split topology sysctls into two --- one for CPU topology and the other
for devices
* Avoid long loops in the hypervisor by using continuations. (I am not
particularly happy about using first_dev in the interface, suggestions
for a better interface would be appreciated)
* Use proper libxl conventions for interfaces
* Avoid hypervisor stack corruption when copying PXM data from guest
A few patches that add interface for querying hypervisor about device
topology and allow 'xl info -n' display this information if PXM object
is provided by ACPI.
This series also makes some optimizations and cleanup of current CPU
topology and NUMA sysctl queries.
Boris Ostrovsky (5):
sysctl: Make XEN_SYSCTL_numainfo a little more efficient
sysctl: Add sysctl interface for querying PCI topology
libxl/libxc: Move libxl_get_cpu_topology()'s hypercall buffer
management to libxc
libxl/libxc: Move libxl_get_numainfo()'s hypercall buffer management
to libxc
libxl: Add interface for querying hypervisor about PCI topology
docs/misc/xsm-flask.txt | 1 +
tools/libxc/include/xenctrl.h | 12 ++-
tools/libxc/xc_misc.c | 103 +++++++++++++++++++---
tools/libxl/libxl.c | 160 ++++++++++++++++++-----------------
tools/libxl/libxl.h | 12 +++
tools/libxl/libxl_freebsd.c | 12 +++
tools/libxl/libxl_internal.h | 5 +
tools/libxl/libxl_linux.c | 69 +++++++++++++++
tools/libxl/libxl_netbsd.c | 12 +++
tools/libxl/libxl_types.idl | 7 ++
tools/libxl/libxl_utils.c | 8 ++
tools/libxl/xl_cmdimpl.c | 40 +++++++--
tools/misc/xenpm.c | 51 +++++------
tools/python/xen/lowlevel/xc/xc.c | 74 ++++++----------
xen/common/sysctl.c | 136 ++++++++++++++++++++++--------
xen/include/public/sysctl.h | 83 +++++++++++++-----
xen/xsm/flask/hooks.c | 1 +
xen/xsm/flask/policy/access_vectors | 1 +
18 files changed, 554 insertions(+), 233 deletions(-)
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v6 1/5] sysctl: Make XEN_SYSCTL_numainfo a little more efficient
2015-04-06 22:12 [PATCH v6 0/5] Display IO topology when PXM data is available (plus some cleanup) Boris Ostrovsky
@ 2015-04-06 22:12 ` Boris Ostrovsky
2015-04-07 16:04 ` Andrew Cooper
2015-04-06 22:12 ` [PATCH v6 2/5] sysctl: Add sysctl interface for querying PCI topology Boris Ostrovsky
` (3 subsequent siblings)
4 siblings, 1 reply; 19+ messages in thread
From: Boris Ostrovsky @ 2015-04-06 22:12 UTC (permalink / raw)
To: ian.jackson, ian.campbell, wei.liu2, stefano.stabellini, dgdegra,
jbeulich, andrew.cooper3, keir
Cc: elena.ufimtseva, dario.faggioli, boris.ostrovsky, xen-devel
A number of changes to XEN_SYSCTL_numainfo interface:
* Make sysctl NUMA topology query use fewer copies by combining some
fields into a single structure and copying distances for each node
in a single copy.
* NULL meminfo and distance handles are a request for maximum number
of nodes (num_nodes). If those handles are valid and num_nodes is
is smaller than the number of nodes in the system then -ENOBUFS is
returned (and correct num_nodes is provided)
* Instead of using max_node_index for passing number of nodes keep this
value in num_nodes: almost all uses of max_node_index required adding
or subtracting one to eventually get to number of nodes anyway.
* Replace INVALID_NUMAINFO_ID with XEN_INVALID_MEM_SZ and add
XEN_INVALID_NODE_DIST.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
---
Changes in v6:
* updated uint32 to unsigned in sysctl
* updated syctl.h comment to reflect right logic for meminfo/distance test
* declared distance[] array static to move it off the stack in sysctl
* Fixed loop control variable initialization in sysctl
tools/libxl/libxl.c | 66 ++++++++++++++-----------------
tools/python/xen/lowlevel/xc/xc.c | 58 +++++++++++++---------------
xen/common/sysctl.c | 78 +++++++++++++++++++++----------------
xen/include/public/sysctl.h | 53 ++++++++++++++-----------
4 files changed, 131 insertions(+), 124 deletions(-)
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index 2a735b3..b7d6bb0 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -5154,65 +5154,59 @@ libxl_numainfo *libxl_get_numainfo(libxl_ctx *ctx, int *nr)
{
GC_INIT(ctx);
xc_numainfo_t ninfo;
- DECLARE_HYPERCALL_BUFFER(xc_node_to_memsize_t, memsize);
- DECLARE_HYPERCALL_BUFFER(xc_node_to_memfree_t, memfree);
- DECLARE_HYPERCALL_BUFFER(uint32_t, node_dists);
+ DECLARE_HYPERCALL_BUFFER(xen_sysctl_meminfo_t, meminfo);
+ DECLARE_HYPERCALL_BUFFER(uint32_t, distance);
libxl_numainfo *ret = NULL;
- int i, j, max_nodes;
+ int i, j;
- max_nodes = libxl_get_max_nodes(ctx);
- if (max_nodes < 0)
- {
+ set_xen_guest_handle(ninfo.meminfo, HYPERCALL_BUFFER_NULL);
+ set_xen_guest_handle(ninfo.distance, HYPERCALL_BUFFER_NULL);
+ if (xc_numainfo(ctx->xch, &ninfo) != 0) {
LIBXL__LOG(ctx, XTL_ERROR, "Unable to determine number of NODES");
ret = NULL;
goto out;
}
- memsize = xc_hypercall_buffer_alloc
- (ctx->xch, memsize, sizeof(*memsize) * max_nodes);
- memfree = xc_hypercall_buffer_alloc
- (ctx->xch, memfree, sizeof(*memfree) * max_nodes);
- node_dists = xc_hypercall_buffer_alloc
- (ctx->xch, node_dists, sizeof(*node_dists) * max_nodes * max_nodes);
- if ((memsize == NULL) || (memfree == NULL) || (node_dists == NULL)) {
+ meminfo = xc_hypercall_buffer_alloc(ctx->xch, meminfo,
+ sizeof(*meminfo) * ninfo.num_nodes);
+ distance = xc_hypercall_buffer_alloc(ctx->xch, distance,
+ sizeof(*distance) *
+ ninfo.num_nodes * ninfo.num_nodes);
+ if ((meminfo == NULL) || (distance == NULL)) {
LIBXL__LOG_ERRNOVAL(ctx, XTL_ERROR, ENOMEM,
"Unable to allocate hypercall arguments");
goto fail;
}
- set_xen_guest_handle(ninfo.node_to_memsize, memsize);
- set_xen_guest_handle(ninfo.node_to_memfree, memfree);
- set_xen_guest_handle(ninfo.node_to_node_distance, node_dists);
- ninfo.max_node_index = max_nodes - 1;
+ set_xen_guest_handle(ninfo.meminfo, meminfo);
+ set_xen_guest_handle(ninfo.distance, distance);
if (xc_numainfo(ctx->xch, &ninfo) != 0) {
LIBXL__LOG_ERRNO(ctx, LIBXL__LOG_ERROR, "getting numainfo");
goto fail;
}
- if (ninfo.max_node_index < max_nodes - 1)
- max_nodes = ninfo.max_node_index + 1;
+ *nr = ninfo.num_nodes;
- *nr = max_nodes;
+ ret = libxl__zalloc(NOGC, sizeof(libxl_numainfo) * ninfo.num_nodes);
+ for (i = 0; i < ninfo.num_nodes; i++)
+ ret[i].dists = libxl__calloc(NOGC, ninfo.num_nodes, sizeof(*distance));
- ret = libxl__zalloc(NOGC, sizeof(libxl_numainfo) * max_nodes);
- for (i = 0; i < max_nodes; i++)
- ret[i].dists = libxl__calloc(NOGC, max_nodes, sizeof(*node_dists));
-
- for (i = 0; i < max_nodes; i++) {
-#define V(mem, i) (mem[i] == INVALID_NUMAINFO_ID) ? \
- LIBXL_NUMAINFO_INVALID_ENTRY : mem[i]
- ret[i].size = V(memsize, i);
- ret[i].free = V(memfree, i);
- ret[i].num_dists = max_nodes;
- for (j = 0; j < ret[i].num_dists; j++)
- ret[i].dists[j] = V(node_dists, i * max_nodes + j);
+ for (i = 0; i < ninfo.num_nodes; i++) {
+#define V(val, invalid) (val == invalid) ? \
+ LIBXL_NUMAINFO_INVALID_ENTRY : val
+ ret[i].size = V(meminfo[i].memsize, XEN_INVALID_MEM_SZ);
+ ret[i].free = V(meminfo[i].memfree, XEN_INVALID_MEM_SZ);
+ ret[i].num_dists = ninfo.num_nodes;
+ for (j = 0; j < ret[i].num_dists; j++) {
+ unsigned idx = i * ninfo.num_nodes + j;
+ ret[i].dists[j] = V(distance[idx], XEN_INVALID_NODE_DIST);
+ }
#undef V
}
fail:
- xc_hypercall_buffer_free(ctx->xch, memsize);
- xc_hypercall_buffer_free(ctx->xch, memfree);
- xc_hypercall_buffer_free(ctx->xch, node_dists);
+ xc_hypercall_buffer_free(ctx->xch, meminfo);
+ xc_hypercall_buffer_free(ctx->xch, distance);
out:
GC_FREE;
diff --git a/tools/python/xen/lowlevel/xc/xc.c b/tools/python/xen/lowlevel/xc/xc.c
index 5e81c4a..ba66d55 100644
--- a/tools/python/xen/lowlevel/xc/xc.c
+++ b/tools/python/xen/lowlevel/xc/xc.c
@@ -1297,55 +1297,52 @@ out:
static PyObject *pyxc_numainfo(XcObject *self)
{
-#define MAX_NODE_INDEX 31
xc_numainfo_t ninfo = { 0 };
- int i, j, max_node_index;
+ unsigned i, j;
uint64_t free_heap;
PyObject *ret_obj = NULL, *node_to_node_dist_list_obj;
PyObject *node_to_memsize_obj, *node_to_memfree_obj;
PyObject *node_to_dma32_mem_obj, *node_to_node_dist_obj;
- DECLARE_HYPERCALL_BUFFER(xc_node_to_memsize_t, node_memsize);
- DECLARE_HYPERCALL_BUFFER(xc_node_to_memfree_t, node_memfree);
- DECLARE_HYPERCALL_BUFFER(xc_node_to_node_dist_t, nodes_dist);
+ DECLARE_HYPERCALL_BUFFER(xen_sysctl_meminfo_t, meminfo);
+ DECLARE_HYPERCALL_BUFFER(uint32_t, distance);
- node_memsize = xc_hypercall_buffer_alloc(self->xc_handle, node_memsize, sizeof(*node_memsize)*(MAX_NODE_INDEX+1));
- if ( node_memsize == NULL )
+ set_xen_guest_handle(ninfo.meminfo, HYPERCALL_BUFFER_NULL);
+ set_xen_guest_handle(ninfo.distance, HYPERCALL_BUFFER_NULL);
+ if ( xc_numainfo(self->xc_handle, &ninfo) != 0 )
goto out;
- node_memfree = xc_hypercall_buffer_alloc(self->xc_handle, node_memfree, sizeof(*node_memfree)*(MAX_NODE_INDEX+1));
- if ( node_memfree == NULL )
+
+ meminfo = xc_hypercall_buffer_alloc(self->xc_handle, meminfo,
+ sizeof(*meminfo) * ninfo.num_nodes);
+ if ( meminfo == NULL )
goto out;
- nodes_dist = xc_hypercall_buffer_alloc(self->xc_handle, nodes_dist, sizeof(*nodes_dist)*(MAX_NODE_INDEX+1)*(MAX_NODE_INDEX+1));
- if ( nodes_dist == NULL )
+ distance = xc_hypercall_buffer_alloc(self->xc_handle, distance,
+ sizeof(*distance) *
+ ninfo.num_nodes * ninfo.num_nodes);
+ if ( distance == NULL )
goto out;
- set_xen_guest_handle(ninfo.node_to_memsize, node_memsize);
- set_xen_guest_handle(ninfo.node_to_memfree, node_memfree);
- set_xen_guest_handle(ninfo.node_to_node_distance, nodes_dist);
- ninfo.max_node_index = MAX_NODE_INDEX;
-
+ set_xen_guest_handle(ninfo.meminfo, meminfo);
+ set_xen_guest_handle(ninfo.distance, distance);
if ( xc_numainfo(self->xc_handle, &ninfo) != 0 )
goto out;
- max_node_index = ninfo.max_node_index;
- if ( max_node_index > MAX_NODE_INDEX )
- max_node_index = MAX_NODE_INDEX;
-
/* Construct node-to-* lists. */
node_to_memsize_obj = PyList_New(0);
node_to_memfree_obj = PyList_New(0);
node_to_dma32_mem_obj = PyList_New(0);
node_to_node_dist_list_obj = PyList_New(0);
- for ( i = 0; i <= max_node_index; i++ )
+ for ( i = 0; i < ninfo.num_nodes; i++ )
{
PyObject *pyint;
+ unsigned invalid_node;
/* Total Memory */
- pyint = PyInt_FromLong(node_memsize[i] >> 20); /* MB */
+ pyint = PyInt_FromLong(meminfo[i].memsize >> 20); /* MB */
PyList_Append(node_to_memsize_obj, pyint);
Py_DECREF(pyint);
/* Free Memory */
- pyint = PyInt_FromLong(node_memfree[i] >> 20); /* MB */
+ pyint = PyInt_FromLong(meminfo[i].memfree >> 20); /* MB */
PyList_Append(node_to_memfree_obj, pyint);
Py_DECREF(pyint);
@@ -1357,10 +1354,11 @@ static PyObject *pyxc_numainfo(XcObject *self)
/* Node to Node Distance */
node_to_node_dist_obj = PyList_New(0);
- for ( j = 0; j <= max_node_index; j++ )
+ invalid_node = (meminfo[i].memsize == XEN_INVALID_MEM_SZ);
+ for ( j = 0; j < ninfo.num_nodes; j++ )
{
- uint32_t dist = nodes_dist[i*(max_node_index+1) + j];
- if ( dist == ~0u )
+ uint32_t dist = distance[i * ninfo.num_nodes + j];
+ if ( invalid_node || (dist == XEN_INVALID_NODE_DIST) )
{
PyList_Append(node_to_node_dist_obj, Py_None);
}
@@ -1375,7 +1373,7 @@ static PyObject *pyxc_numainfo(XcObject *self)
Py_DECREF(node_to_node_dist_obj);
}
- ret_obj = Py_BuildValue("{s:i}", "max_node_index", max_node_index);
+ ret_obj = Py_BuildValue("{s:i}", "max_node_index", ninfo.num_nodes + 1);
PyDict_SetItemString(ret_obj, "node_memsize", node_to_memsize_obj);
Py_DECREF(node_to_memsize_obj);
@@ -1391,11 +1389,9 @@ static PyObject *pyxc_numainfo(XcObject *self)
Py_DECREF(node_to_node_dist_list_obj);
out:
- xc_hypercall_buffer_free(self->xc_handle, node_memsize);
- xc_hypercall_buffer_free(self->xc_handle, node_memfree);
- xc_hypercall_buffer_free(self->xc_handle, nodes_dist);
+ xc_hypercall_buffer_free(self->xc_handle, meminfo);
+ xc_hypercall_buffer_free(self->xc_handle, distance);
return ret_obj ? ret_obj : pyxc_error_to_exception(self->xc_handle);
-#undef MAX_NODE_INDEX
}
static PyObject *pyxc_xeninfo(XcObject *self)
diff --git a/xen/common/sysctl.c b/xen/common/sysctl.c
index 70413cc..d75440e 100644
--- a/xen/common/sysctl.c
+++ b/xen/common/sysctl.c
@@ -274,54 +274,64 @@ long do_sysctl(XEN_GUEST_HANDLE_PARAM(xen_sysctl_t) u_sysctl)
case XEN_SYSCTL_numainfo:
{
- uint32_t i, j, max_node_index, last_online_node;
+ unsigned int i, j, num_nodes;
xen_sysctl_numainfo_t *ni = &op->u.numainfo;
- last_online_node = last_node(node_online_map);
- max_node_index = min_t(uint32_t, ni->max_node_index, last_online_node);
- ni->max_node_index = last_online_node;
+ num_nodes = last_node(node_online_map) + 1;
- for ( i = 0; i <= max_node_index; i++ )
+ if ( !guest_handle_is_null(ni->meminfo) &&
+ !guest_handle_is_null(ni->distance) )
{
- if ( !guest_handle_is_null(ni->node_to_memsize) )
+ if ( ni->num_nodes < num_nodes )
{
- uint64_t memsize = node_online(i) ?
- node_spanned_pages(i) << PAGE_SHIFT : 0ul;
- if ( copy_to_guest_offset(ni->node_to_memsize, i, &memsize, 1) )
- break;
- }
- if ( !guest_handle_is_null(ni->node_to_memfree) )
- {
- uint64_t memfree = node_online(i) ?
- avail_node_heap_pages(i) << PAGE_SHIFT : 0ul;
- if ( copy_to_guest_offset(ni->node_to_memfree, i, &memfree, 1) )
- break;
+ ret = -ENOBUFS;
+ i = num_nodes;
}
+ else
+ i = 0;
- if ( !guest_handle_is_null(ni->node_to_node_distance) )
+ for ( ; i < num_nodes; i++ )
{
- for ( j = 0; j <= max_node_index; j++)
+ xen_sysctl_meminfo_t meminfo;
+ static uint32_t distance[MAX_NUMNODES];
+
+ if ( node_online(i) )
+ {
+ meminfo.memsize = node_spanned_pages(i) << PAGE_SHIFT;
+ meminfo.memfree = avail_node_heap_pages(i) << PAGE_SHIFT;
+ }
+ else
+ meminfo.memsize = meminfo.memfree = XEN_INVALID_MEM_SZ;
+
+ for ( j = 0; j < num_nodes; j++ )
{
- uint32_t distance = ~0u;
- if ( node_online(i) && node_online(j) )
- {
- u8 d = __node_distance(i, j);
-
- if ( d != NUMA_NO_DISTANCE )
- distance = d;
- }
- if ( copy_to_guest_offset(
- ni->node_to_node_distance,
- i*(max_node_index+1) + j, &distance, 1) )
- break;
+ distance[j] = __node_distance(i, j);
+ if ( distance[j] == NUMA_NO_DISTANCE )
+ distance[j] = XEN_INVALID_NODE_DIST;
}
- if ( j <= max_node_index )
+
+ if ( copy_to_guest_offset(ni->distance, i * num_nodes,
+ distance, num_nodes) ||
+ copy_to_guest_offset(ni->meminfo, i, &meminfo, 1) )
+ {
+ ret = -EFAULT;
break;
+ }
}
}
+ else
+ i = num_nodes;
- ret = ((i <= max_node_index) || copy_to_guest(u_sysctl, op, 1))
- ? -EFAULT : 0;
+ if ( (!ret || (ret = -ENOBUFS)) && (ni->num_nodes != i) )
+ {
+ ni->num_nodes = i;
+ if ( __copy_field_to_guest(u_sysctl, op,
+ u.numainfo.num_nodes) )
+ {
+ ret = -EFAULT;
+ break;
+ }
+ }
}
break;
diff --git a/xen/include/public/sysctl.h b/xen/include/public/sysctl.h
index 711441f..5aa3708 100644
--- a/xen/include/public/sysctl.h
+++ b/xen/include/public/sysctl.h
@@ -494,34 +494,41 @@ typedef struct xen_sysctl_cputopoinfo xen_sysctl_cputopoinfo_t;
DEFINE_XEN_GUEST_HANDLE(xen_sysctl_cputopoinfo_t);
/* XEN_SYSCTL_numainfo */
-#define INVALID_NUMAINFO_ID (~0U)
+#define XEN_INVALID_MEM_SZ (~0U)
+#define XEN_INVALID_NODE_DIST (~0U)
+
+struct xen_sysctl_meminfo {
+ uint64_t memsize;
+ uint64_t memfree;
+};
+typedef struct xen_sysctl_meminfo xen_sysctl_meminfo_t;
+DEFINE_XEN_GUEST_HANDLE(xen_sysctl_meminfo_t);
+
+/*
+ * IN:
+ * - NULL 'meminfo' or 'distance' handles is a request for maximun
+ * 'num_nodes'.
+ * - otherwise it's the number of entries in 'meminfo' (and square root
+ * of number of entries in 'distance')
+ *
+ * OUT:
+ * - If 'num_nodes' is less than the number Xen needs to write, -ENOBUFS shall
+ * be returned and 'num_nodes' updated to reflect the intended number.
+ * - On success, 'num_nodes' shall indicate the number of entries written, which
+ * may be less than the maximum.
+ */
+
struct xen_sysctl_numainfo {
- /*
- * IN: maximum addressable entry in the caller-provided arrays.
- * OUT: largest node identifier in the system.
- * If OUT is greater than IN then the arrays are truncated!
- */
- uint32_t max_node_index;
+ uint32_t num_nodes;
- /* NB. Entries are 0 if node is not present. */
- XEN_GUEST_HANDLE_64(uint64) node_to_memsize;
- XEN_GUEST_HANDLE_64(uint64) node_to_memfree;
+ XEN_GUEST_HANDLE_64(xen_sysctl_meminfo_t) meminfo;
/*
- * Array, of size (max_node_index+1)^2, listing memory access distances
- * between nodes. If an entry has no node distance information (e.g., node
- * not present) then the value ~0u is written.
- *
- * Note that the array rows must be indexed by multiplying by the minimum
- * of the caller-provided max_node_index and the returned value of
- * max_node_index. That is, if the largest node index in the system is
- * smaller than the caller can handle, a smaller 2-d array is constructed
- * within the space provided by the caller. When this occurs, trailing
- * space provided by the caller is not modified. If the largest node index
- * in the system is larger than the caller can handle, then a 2-d array of
- * the maximum size handleable by the caller is constructed.
+ * Distance between nodes 'i' and 'j' is stored in index 'i*N + j',
+ * where N is the number of nodes that will be returned in 'num_nodes'
+ * (i.e. not 'num_nodes' provided by the caller)
*/
- XEN_GUEST_HANDLE_64(uint32) node_to_node_distance;
+ XEN_GUEST_HANDLE_64(uint32) distance;
};
typedef struct xen_sysctl_numainfo xen_sysctl_numainfo_t;
DEFINE_XEN_GUEST_HANDLE(xen_sysctl_numainfo_t);
--
1.7.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v6 2/5] sysctl: Add sysctl interface for querying PCI topology
2015-04-06 22:12 [PATCH v6 0/5] Display IO topology when PXM data is available (plus some cleanup) Boris Ostrovsky
2015-04-06 22:12 ` [PATCH v6 1/5] sysctl: Make XEN_SYSCTL_numainfo a little more efficient Boris Ostrovsky
@ 2015-04-06 22:12 ` Boris Ostrovsky
2015-04-07 16:09 ` Andrew Cooper
2015-04-07 17:22 ` Daniel De Graaf
2015-04-06 22:12 ` [PATCH v6 3/5] libxl/libxc: Move libxl_get_cpu_topology()'s hypercall buffer management to libxc Boris Ostrovsky
` (2 subsequent siblings)
4 siblings, 2 replies; 19+ messages in thread
From: Boris Ostrovsky @ 2015-04-06 22:12 UTC (permalink / raw)
To: ian.jackson, ian.campbell, wei.liu2, stefano.stabellini, dgdegra,
jbeulich, andrew.cooper3, keir
Cc: elena.ufimtseva, dario.faggioli, boris.ostrovsky, xen-devel
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
---
Changes in v6:
* Dropped continuations, the sysctl now returns after 64 iteration if necessary
* -ENODEV returned if device is not found
* sysctl's first_dev is now expected to be used by userspace to continue the query
* Added XSM hooks
docs/misc/xsm-flask.txt | 1 +
xen/common/sysctl.c | 58 +++++++++++++++++++++++++++++++++++
xen/include/public/sysctl.h | 30 ++++++++++++++++++
xen/xsm/flask/hooks.c | 1 +
xen/xsm/flask/policy/access_vectors | 1 +
5 files changed, 91 insertions(+), 0 deletions(-)
diff --git a/docs/misc/xsm-flask.txt b/docs/misc/xsm-flask.txt
index 90a2aef..4e0f14f 100644
--- a/docs/misc/xsm-flask.txt
+++ b/docs/misc/xsm-flask.txt
@@ -121,6 +121,7 @@ __HYPERVISOR_sysctl (xen/include/public/sysctl.h)
* XEN_SYSCTL_cpupool_op
* XEN_SYSCTL_scheduler_op
* XEN_SYSCTL_coverage_op
+ * XEN_SYSCTL_pcitopoinfo
__HYPERVISOR_memory_op (xen/include/public/memory.h)
diff --git a/xen/common/sysctl.c b/xen/common/sysctl.c
index d75440e..449ff70 100644
--- a/xen/common/sysctl.c
+++ b/xen/common/sysctl.c
@@ -399,6 +399,64 @@ long do_sysctl(XEN_GUEST_HANDLE_PARAM(xen_sysctl_t) u_sysctl)
break;
#endif
+#ifdef HAS_PCI
+ case XEN_SYSCTL_pcitopoinfo:
+ {
+ xen_sysctl_pcitopoinfo_t *ti = &op->u.pcitopoinfo;
+ unsigned dev_cnt = 0;
+
+ if ( guest_handle_is_null(ti->devs) ||
+ guest_handle_is_null(ti->nodes) ||
+ (ti->first_dev > ti->num_devs) )
+ {
+ ret = -EINVAL;
+ break;
+ }
+
+ while ( ti->first_dev < ti->num_devs )
+ {
+ physdev_pci_device_t dev;
+ uint32_t node;
+ struct pci_dev *pdev;
+
+ if ( copy_from_guest_offset(&dev, ti->devs, ti->first_dev, 1) )
+ {
+ ret = -EFAULT;
+ break;
+ }
+
+ spin_lock(&pcidevs_lock);
+ pdev = pci_get_pdev(dev.seg, dev.bus, dev.devfn);
+ if ( !pdev )
+ {
+ ret = -ENODEV;
+ node = XEN_INVALID_NODE_ID;
+ }
+ else if ( pdev->node == NUMA_NO_NODE )
+ node = XEN_INVALID_NODE_ID;
+ else
+ node = pdev->node;
+ spin_unlock(&pcidevs_lock);
+
+ if ( copy_to_guest_offset(ti->nodes, ti->first_dev, &node, 1) )
+ {
+ ret = -EFAULT;
+ break;
+ }
+
+ ti->first_dev++;
+
+ if ( (++dev_cnt > 0x3f) && hypercall_preempt_check() )
+ break;
+ }
+
+ if ( (ret != -EFAULT) &&
+ __copy_field_to_guest(u_sysctl, op, u.pcitopoinfo.first_dev) )
+ ret = -EFAULT;
+ }
+ break;
+#endif
+
default:
ret = arch_do_sysctl(op, u_sysctl);
copyback = 0;
diff --git a/xen/include/public/sysctl.h b/xen/include/public/sysctl.h
index 5aa3708..877b661 100644
--- a/xen/include/public/sysctl.h
+++ b/xen/include/public/sysctl.h
@@ -33,6 +33,7 @@
#include "xen.h"
#include "domctl.h"
+#include "physdev.h"
#define XEN_SYSCTL_INTERFACE_VERSION 0x0000000C
@@ -668,6 +669,33 @@ struct xen_sysctl_psr_cmt_op {
typedef struct xen_sysctl_psr_cmt_op xen_sysctl_psr_cmt_op_t;
DEFINE_XEN_GUEST_HANDLE(xen_sysctl_psr_cmt_op_t);
+/* XEN_SYSCTL_pcitopoinfo */
+struct xen_sysctl_pcitopoinfo {
+ /* IN: Number of elements in 'pcitopo' and 'nodes' arrays. */
+ uint32_t num_devs;
+
+ /*
+ * IN/OUT:
+ * IN: First element of pcitopo array that needs to be processed by
+ * the hypervisor.
+ * OUT: Index of the first still unprocessed element of pcitopo array.
+ */
+ uint32_t first_dev;
+
+ /* IN: list of devices for which node IDs are requested. */
+ XEN_GUEST_HANDLE_64(physdev_pci_device_t) devs;
+
+ /*
+ * OUT: node identifier for each device.
+ * If information for a particular device is not avalable then set
+ * to XEN_INVALID_NODE_ID. In addition, if device is not known to the
+ * hypervisor, sysctl will stop further processing and return -ENODEV.
+ */
+ XEN_GUEST_HANDLE_64(uint32) nodes;
+};
+typedef struct xen_sysctl_pcitopoinfo xen_sysctl_pcitopoinfo_t;
+DEFINE_XEN_GUEST_HANDLE(xen_sysctl_pcitopoinfo_t);
+
struct xen_sysctl {
uint32_t cmd;
#define XEN_SYSCTL_readconsole 1
@@ -690,12 +718,14 @@ struct xen_sysctl {
#define XEN_SYSCTL_scheduler_op 19
#define XEN_SYSCTL_coverage_op 20
#define XEN_SYSCTL_psr_cmt_op 21
+#define XEN_SYSCTL_pcitopoinfo 22
uint32_t interface_version; /* XEN_SYSCTL_INTERFACE_VERSION */
union {
struct xen_sysctl_readconsole readconsole;
struct xen_sysctl_tbuf_op tbuf_op;
struct xen_sysctl_physinfo physinfo;
struct xen_sysctl_cputopoinfo cputopoinfo;
+ struct xen_sysctl_pcitopoinfo pcitopoinfo;
struct xen_sysctl_numainfo numainfo;
struct xen_sysctl_sched_id sched_id;
struct xen_sysctl_perfc_op perfc_op;
diff --git a/xen/xsm/flask/hooks.c b/xen/xsm/flask/hooks.c
index 4e2c1b7..da7cdfd 100644
--- a/xen/xsm/flask/hooks.c
+++ b/xen/xsm/flask/hooks.c
@@ -785,6 +785,7 @@ static int flask_sysctl(int cmd)
case XEN_SYSCTL_physinfo:
case XEN_SYSCTL_cputopoinfo:
case XEN_SYSCTL_numainfo:
+ case XEN_SYSCTL_pcitopoinfo:
return domain_has_xen(current->domain, XEN__PHYSINFO);
case XEN_SYSCTL_psr_cmt_op:
diff --git a/xen/xsm/flask/policy/access_vectors b/xen/xsm/flask/policy/access_vectors
index fe5406d..6e24a6e 100644
--- a/xen/xsm/flask/policy/access_vectors
+++ b/xen/xsm/flask/policy/access_vectors
@@ -28,6 +28,7 @@ class xen
# XENPF_microcode_update
microcode
# XEN_SYSCTL_physinfo, XEN_SYSCTL_cputopoinfo, XEN_SYSCTL_numainfo
+# XEN_SYSCTL_pcitopoinfo
physinfo
# XENPF_platform_quirk
quirk
--
1.7.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v6 3/5] libxl/libxc: Move libxl_get_cpu_topology()'s hypercall buffer management to libxc
2015-04-06 22:12 [PATCH v6 0/5] Display IO topology when PXM data is available (plus some cleanup) Boris Ostrovsky
2015-04-06 22:12 ` [PATCH v6 1/5] sysctl: Make XEN_SYSCTL_numainfo a little more efficient Boris Ostrovsky
2015-04-06 22:12 ` [PATCH v6 2/5] sysctl: Add sysctl interface for querying PCI topology Boris Ostrovsky
@ 2015-04-06 22:12 ` Boris Ostrovsky
2015-04-15 12:31 ` Ian Campbell
2015-04-06 22:12 ` [PATCH v6 4/5] libxl/libxc: Move libxl_get_numainfo()'s " Boris Ostrovsky
2015-04-06 22:12 ` [PATCH v6 5/5] libxl: Add interface for querying hypervisor about PCI topology Boris Ostrovsky
4 siblings, 1 reply; 19+ messages in thread
From: Boris Ostrovsky @ 2015-04-06 22:12 UTC (permalink / raw)
To: ian.jackson, ian.campbell, wei.liu2, stefano.stabellini, dgdegra,
jbeulich, andrew.cooper3, keir
Cc: elena.ufimtseva, dario.faggioli, boris.ostrovsky, xen-devel
xc_cputopoinfo() is not expected to be used on a hot path and therefore
hypercall buffer management can be pushed into libxc. This will simplify
life for callers.
Also update error reporting macros.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
---
Changes in v6:
* Dropped NULL buffer test in xc_cputopoinfo()
tools/libxc/include/xenctrl.h | 5 ++-
tools/libxc/xc_misc.c | 23 +++++++++++-----
tools/libxl/libxl.c | 37 ++++++++------------------
tools/misc/xenpm.c | 51 ++++++++++++++++---------------------
tools/python/xen/lowlevel/xc/xc.c | 20 ++++++--------
5 files changed, 61 insertions(+), 75 deletions(-)
diff --git a/tools/libxc/include/xenctrl.h b/tools/libxc/include/xenctrl.h
index 552ace8..f298702 100644
--- a/tools/libxc/include/xenctrl.h
+++ b/tools/libxc/include/xenctrl.h
@@ -1226,7 +1226,7 @@ int xc_readconsolering(xc_interface *xch,
int xc_send_debug_keys(xc_interface *xch, char *keys);
typedef xen_sysctl_physinfo_t xc_physinfo_t;
-typedef xen_sysctl_cputopoinfo_t xc_cputopoinfo_t;
+typedef xen_sysctl_cputopo_t xc_cputopo_t;
typedef xen_sysctl_numainfo_t xc_numainfo_t;
typedef uint32_t xc_cpu_to_node_t;
@@ -1237,7 +1237,8 @@ typedef uint64_t xc_node_to_memfree_t;
typedef uint32_t xc_node_to_node_dist_t;
int xc_physinfo(xc_interface *xch, xc_physinfo_t *info);
-int xc_cputopoinfo(xc_interface *xch, xc_cputopoinfo_t *info);
+int xc_cputopoinfo(xc_interface *xch, unsigned *max_cpus,
+ xc_cputopo_t *cputopo);
int xc_numainfo(xc_interface *xch, xc_numainfo_t *info);
int xc_sched_id(xc_interface *xch,
diff --git a/tools/libxc/xc_misc.c b/tools/libxc/xc_misc.c
index be68291..630a86c 100644
--- a/tools/libxc/xc_misc.c
+++ b/tools/libxc/xc_misc.c
@@ -177,22 +177,31 @@ int xc_physinfo(xc_interface *xch,
return 0;
}
-int xc_cputopoinfo(xc_interface *xch,
- xc_cputopoinfo_t *put_info)
+int xc_cputopoinfo(xc_interface *xch, unsigned *max_cpus,
+ xc_cputopo_t *cputopo)
{
int ret;
DECLARE_SYSCTL;
+ DECLARE_HYPERCALL_BOUNCE(cputopo, *max_cpus * sizeof(*cputopo),
+ XC_HYPERCALL_BUFFER_BOUNCE_OUT);
- sysctl.cmd = XEN_SYSCTL_cputopoinfo;
+ if ( (ret = xc_hypercall_bounce_pre(xch, cputopo)) )
+ goto out;
- memcpy(&sysctl.u.cputopoinfo, put_info, sizeof(*put_info));
+ sysctl.u.cputopoinfo.num_cpus = *max_cpus;
+ set_xen_guest_handle(sysctl.u.cputopoinfo.cputopo, cputopo);
+
+ sysctl.cmd = XEN_SYSCTL_cputopoinfo;
if ( (ret = do_sysctl(xch, &sysctl)) != 0 )
- return ret;
+ goto out;
- memcpy(put_info, &sysctl.u.cputopoinfo, sizeof(*put_info));
+ *max_cpus = sysctl.u.cputopoinfo.num_cpus;
- return 0;
+out:
+ xc_hypercall_bounce_post(xch, cputopo);
+
+ return ret;
}
int xc_numainfo(xc_interface *xch,
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index b7d6bb0..697c86d 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -5100,37 +5100,28 @@ int libxl_get_physinfo(libxl_ctx *ctx, libxl_physinfo *physinfo)
libxl_cputopology *libxl_get_cpu_topology(libxl_ctx *ctx, int *nb_cpu_out)
{
GC_INIT(ctx);
- xc_cputopoinfo_t tinfo;
- DECLARE_HYPERCALL_BUFFER(xen_sysctl_cputopo_t, cputopo);
+ xc_cputopo_t *cputopo;
libxl_cputopology *ret = NULL;
int i;
+ unsigned num_cpus;
- /* Setting buffer to NULL makes the hypercall return number of CPUs */
- set_xen_guest_handle(tinfo.cputopo, HYPERCALL_BUFFER_NULL);
- if (xc_cputopoinfo(ctx->xch, &tinfo) != 0)
+ /* Setting buffer to NULL makes the call return number of CPUs */
+ if (xc_cputopoinfo(ctx->xch, &num_cpus, NULL))
{
- LIBXL__LOG(ctx, XTL_ERROR, "Unable to determine number of CPUS");
- ret = NULL;
+ LOGEV(ERROR, errno, "Unable to determine number of CPUS");
goto out;
}
- cputopo = xc_hypercall_buffer_alloc(ctx->xch, cputopo,
- sizeof(*cputopo) * tinfo.num_cpus);
- if (cputopo == NULL) {
- LIBXL__LOG_ERRNOVAL(ctx, XTL_ERROR, ENOMEM,
- "Unable to allocate hypercall arguments");
- goto fail;
- }
- set_xen_guest_handle(tinfo.cputopo, cputopo);
+ cputopo = libxl__zalloc(gc, sizeof(*cputopo) * num_cpus);
- if (xc_cputopoinfo(ctx->xch, &tinfo) != 0) {
- LIBXL__LOG_ERRNO(ctx, XTL_ERROR, "CPU topology info hypercall failed");
- goto fail;
+ if (xc_cputopoinfo(ctx->xch, &num_cpus, cputopo)) {
+ LOGEV(ERROR, errno, "CPU topology info hypercall failed");
+ goto out;
}
- ret = libxl__zalloc(NOGC, sizeof(libxl_cputopology) * tinfo.num_cpus);
+ ret = libxl__zalloc(NOGC, sizeof(libxl_cputopology) * num_cpus);
- for (i = 0; i < tinfo.num_cpus; i++) {
+ for (i = 0; i < num_cpus; i++) {
#define V(map, i, invalid) ( cputopo[i].map == invalid) ? \
LIBXL_CPUTOPOLOGY_INVALID_ENTRY : cputopo[i].map
ret[i].core = V(core, i, XEN_INVALID_CORE_ID);
@@ -5139,11 +5130,7 @@ libxl_cputopology *libxl_get_cpu_topology(libxl_ctx *ctx, int *nb_cpu_out)
#undef V
}
-fail:
- xc_hypercall_buffer_free(ctx->xch, cputopo);
-
- if (ret)
- *nb_cpu_out = tinfo.num_cpus;
+ *nb_cpu_out = num_cpus;
out:
GC_FREE;
diff --git a/tools/misc/xenpm.c b/tools/misc/xenpm.c
index a5d07de..24ee6ef 100644
--- a/tools/misc/xenpm.c
+++ b/tools/misc/xenpm.c
@@ -355,20 +355,17 @@ static void signal_int_handler(int signo)
int i, j, k;
struct timeval tv;
int cx_cap = 0, px_cap = 0;
- DECLARE_HYPERCALL_BUFFER(xen_sysctl_cputopo_t, cputopo);
- xc_cputopoinfo_t info = { 0 };
+ xc_cputopo_t *cputopo;
+ unsigned max_cpus;
- set_xen_guest_handle(info.cputopo, HYPERCALL_BUFFER_NULL);
- if ( xc_cputopoinfo(xc_handle, &info) != 0 )
+ if ( xc_cputopoinfo(xc_handle, &max_cpus, NULL) != 0 )
{
fprintf(stderr, "failed to discover number of CPUs: %s\n",
strerror(errno));
goto out;
}
- cputopo = xc_hypercall_buffer_alloc(xc_handle, cputopo,
- sizeof(*cputopo) * info.num_cpus);
-
+ cputopo = calloc(max_cpus, sizeof(*cputopo));
if ( cputopo == NULL )
{
fprintf(stderr, "failed to allocate hypercall buffers\n");
@@ -453,28 +450,26 @@ static void signal_int_handler(int signo)
printf(" Avg freq\t%d\tKHz\n", avgfreq[i]);
}
- set_xen_guest_handle(info.cputopo, cputopo);
-
- if ( cx_cap && !xc_cputopoinfo(xc_handle, &info) )
+ if ( cx_cap && !xc_cputopoinfo(xc_handle, &max_cpus, cputopo) )
{
uint32_t socket_ids[MAX_NR_CPU];
uint32_t core_ids[MAX_NR_CPU];
uint32_t socket_nr = 0;
uint32_t core_nr = 0;
- if ( info.num_cpus > MAX_NR_CPU )
- info.num_cpus = MAX_NR_CPU;
+ if ( max_cpus > MAX_NR_CPU )
+ max_cpus = MAX_NR_CPU;
/* check validity */
- for ( i = 0; i < info.num_cpus; i++ )
+ for ( i = 0; i < max_cpus; i++ )
{
if ( cputopo[i].core == XEN_INVALID_CORE_ID ||
cputopo[i].socket == XEN_INVALID_SOCKET_ID )
break;
}
- if ( i >= info.num_cpus )
+ if ( i >= max_cpus )
{
/* find socket nr & core nr per socket */
- for ( i = 0; i < info.num_cpus; i++ )
+ for ( i = 0; i < max_cpus; i++ )
{
for ( j = 0; j < socket_nr; j++ )
if ( cputopo[i].socket == socket_ids[j] )
@@ -501,7 +496,7 @@ static void signal_int_handler(int signo)
unsigned int n;
uint64_t res;
- for ( j = 0; j < info.num_cpus; j++ )
+ for ( j = 0; j < max_cpus; j++ )
{
if ( cputopo[j].socket == socket_ids[i] )
break;
@@ -520,7 +515,7 @@ static void signal_int_handler(int signo)
}
for ( k = 0; k < core_nr; k++ )
{
- for ( j = 0; j < info.num_cpus; j++ )
+ for ( j = 0; j < max_cpus; j++ )
{
if ( cputopo[j].socket == socket_ids[i] &&
cputopo[j].core == core_ids[k] )
@@ -558,7 +553,7 @@ static void signal_int_handler(int signo)
free(sum);
free(avgfreq);
out:
- xc_hypercall_buffer_free(xc_handle, cputopo);
+ free(cputopo);
xc_interface_close(xc_handle);
exit(0);
}
@@ -965,12 +960,11 @@ void scaling_governor_func(int argc, char *argv[])
void cpu_topology_func(int argc, char *argv[])
{
- DECLARE_HYPERCALL_BUFFER(xen_sysctl_cputopo_t, cputopo);
- xc_cputopoinfo_t info = { 0 };
- int i, rc = ENOMEM;
+ xc_cputopo_t *cputopo;
+ unsigned max_cpus;
+ int i, rc;
- set_xen_guest_handle(info.cputopo, HYPERCALL_BUFFER_NULL);
- if ( xc_cputopoinfo(xc_handle, &info) )
+ if ( xc_cputopoinfo(xc_handle, &max_cpus, NULL) != 0 )
{
rc = errno;
fprintf(stderr, "failed to discover number of CPUs (%d - %s)\n",
@@ -978,16 +972,15 @@ void cpu_topology_func(int argc, char *argv[])
goto out;
}
- cputopo = xc_hypercall_buffer_alloc(xc_handle, cputopo,
- sizeof(*cputopo) * info.num_cpus);
+ cputopo = calloc(max_cpus, sizeof(*cputopo));
if ( cputopo == NULL )
{
+ rc = ENOMEM;
fprintf(stderr, "failed to allocate hypercall buffers\n");
goto out;
}
- set_xen_guest_handle(info.cputopo, cputopo);
- if ( xc_cputopoinfo(xc_handle, &info) )
+ if ( xc_cputopoinfo(xc_handle, &max_cpus, cputopo) )
{
rc = errno;
fprintf(stderr, "Cannot get Xen CPU topology (%d - %s)\n",
@@ -996,7 +989,7 @@ void cpu_topology_func(int argc, char *argv[])
}
printf("CPU\tcore\tsocket\tnode\n");
- for ( i = 0; i < info.num_cpus; i++ )
+ for ( i = 0; i < max_cpus; i++ )
{
if ( cputopo[i].core == XEN_INVALID_CORE_ID )
continue;
@@ -1005,7 +998,7 @@ void cpu_topology_func(int argc, char *argv[])
}
rc = 0;
out:
- xc_hypercall_buffer_free(xc_handle, cputopo);
+ free(cputopo);
if ( rc )
exit(rc);
}
diff --git a/tools/python/xen/lowlevel/xc/xc.c b/tools/python/xen/lowlevel/xc/xc.c
index ba66d55..21ba57d 100644
--- a/tools/python/xen/lowlevel/xc/xc.c
+++ b/tools/python/xen/lowlevel/xc/xc.c
@@ -1220,30 +1220,26 @@ static PyObject *pyxc_getcpuinfo(XcObject *self, PyObject *args, PyObject *kwds)
static PyObject *pyxc_topologyinfo(XcObject *self)
{
- xc_cputopoinfo_t tinfo = { 0 };
- unsigned i;
+ xc_cputopo_t *cputopo = NULL;
+ unsigned i, num_cpus;
PyObject *ret_obj = NULL;
PyObject *cpu_to_core_obj, *cpu_to_socket_obj, *cpu_to_node_obj;
- DECLARE_HYPERCALL_BUFFER(xen_sysctl_cputopo_t, cputopo);
- set_xen_guest_handle(tinfo.cputopo, HYPERCALL_BUFFER_NULL);
- if ( xc_cputopoinfo(self->xc_handle, &tinfo) != 0 )
+ if ( xc_cputopoinfo(self->xc_handle, &num_cpus, NULL) != 0 )
goto out;
- cputopo = xc_hypercall_buffer_alloc(self->xc_handle, cputopo,
- sizeof(*cputopo) * tinfo.num_cpus);
+ cputopo = calloc(num_cpus, sizeof(*cputopo));
if ( cputopo == NULL )
goto out;
- set_xen_guest_handle(tinfo.cputopo, cputopo);
- if ( xc_cputopoinfo(self->xc_handle, &tinfo) != 0 )
+ if ( xc_cputopoinfo(self->xc_handle, &num_cpus, cputopo) != 0 )
goto out;
/* Construct cpu-to-* lists. */
cpu_to_core_obj = PyList_New(0);
cpu_to_socket_obj = PyList_New(0);
cpu_to_node_obj = PyList_New(0);
- for ( i = 0; i < tinfo.num_cpus; i++ )
+ for ( i = 0; i < num_cpus; i++ )
{
if ( cputopo[i].core == XEN_INVALID_CORE_ID )
{
@@ -1279,7 +1275,7 @@ static PyObject *pyxc_topologyinfo(XcObject *self)
}
}
- ret_obj = Py_BuildValue("{s:i}", "max_cpu_index", tinfo.num_cpus + 1);
+ ret_obj = Py_BuildValue("{s:i}", "max_cpu_index", num_cpus + 1);
PyDict_SetItemString(ret_obj, "cpu_to_core", cpu_to_core_obj);
Py_DECREF(cpu_to_core_obj);
@@ -1291,7 +1287,7 @@ static PyObject *pyxc_topologyinfo(XcObject *self)
Py_DECREF(cpu_to_node_obj);
out:
- xc_hypercall_buffer_free(self->xc_handle, cputopo);
+ free(cputopo);
return ret_obj ? ret_obj : pyxc_error_to_exception(self->xc_handle);
}
--
1.7.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v6 4/5] libxl/libxc: Move libxl_get_numainfo()'s hypercall buffer management to libxc
2015-04-06 22:12 [PATCH v6 0/5] Display IO topology when PXM data is available (plus some cleanup) Boris Ostrovsky
` (2 preceding siblings ...)
2015-04-06 22:12 ` [PATCH v6 3/5] libxl/libxc: Move libxl_get_cpu_topology()'s hypercall buffer management to libxc Boris Ostrovsky
@ 2015-04-06 22:12 ` Boris Ostrovsky
2015-04-15 12:33 ` Ian Campbell
2015-04-06 22:12 ` [PATCH v6 5/5] libxl: Add interface for querying hypervisor about PCI topology Boris Ostrovsky
4 siblings, 1 reply; 19+ messages in thread
From: Boris Ostrovsky @ 2015-04-06 22:12 UTC (permalink / raw)
To: ian.jackson, ian.campbell, wei.liu2, stefano.stabellini, dgdegra,
jbeulich, andrew.cooper3, keir
Cc: elena.ufimtseva, dario.faggioli, boris.ostrovsky, xen-devel
xc_numainfo() is not expected to be used on a hot path and therefore
hypercall buffer management can be pushed into libxc. This will simplify
life for callers.
Also update error logging macros.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
---
Changes in v6:
* Dropped separate NULL buffer tests in xc_numainfo()
* Moved test for buffers validity (either both or neither are NULL) to be the
the first thing to do in xc_numainfo()
tools/libxc/include/xenctrl.h | 4 ++-
tools/libxc/xc_misc.c | 36 +++++++++++++++++++++-----
tools/libxl/libxl.c | 51 ++++++++++++------------------------
tools/python/xen/lowlevel/xc/xc.c | 38 ++++++++++-----------------
4 files changed, 63 insertions(+), 66 deletions(-)
diff --git a/tools/libxc/include/xenctrl.h b/tools/libxc/include/xenctrl.h
index f298702..4cf8daf 100644
--- a/tools/libxc/include/xenctrl.h
+++ b/tools/libxc/include/xenctrl.h
@@ -1228,6 +1228,7 @@ int xc_send_debug_keys(xc_interface *xch, char *keys);
typedef xen_sysctl_physinfo_t xc_physinfo_t;
typedef xen_sysctl_cputopo_t xc_cputopo_t;
typedef xen_sysctl_numainfo_t xc_numainfo_t;
+typedef xen_sysctl_meminfo_t xc_meminfo_t;
typedef uint32_t xc_cpu_to_node_t;
typedef uint32_t xc_cpu_to_socket_t;
@@ -1239,7 +1240,8 @@ typedef uint32_t xc_node_to_node_dist_t;
int xc_physinfo(xc_interface *xch, xc_physinfo_t *info);
int xc_cputopoinfo(xc_interface *xch, unsigned *max_cpus,
xc_cputopo_t *cputopo);
-int xc_numainfo(xc_interface *xch, xc_numainfo_t *info);
+int xc_numainfo(xc_interface *xch, unsigned *max_nodes,
+ xc_meminfo_t *meminfo, uint32_t *distance);
int xc_sched_id(xc_interface *xch,
int *sched_id);
diff --git a/tools/libxc/xc_misc.c b/tools/libxc/xc_misc.c
index 630a86c..97cbe63 100644
--- a/tools/libxc/xc_misc.c
+++ b/tools/libxc/xc_misc.c
@@ -204,22 +204,44 @@ out:
return ret;
}
-int xc_numainfo(xc_interface *xch,
- xc_numainfo_t *put_info)
+int xc_numainfo(xc_interface *xch, unsigned *max_nodes,
+ xc_meminfo_t *meminfo, uint32_t *distance)
{
int ret;
DECLARE_SYSCTL;
+ DECLARE_HYPERCALL_BOUNCE(meminfo, *max_nodes * sizeof(*meminfo),
+ XC_HYPERCALL_BUFFER_BOUNCE_OUT);
+ DECLARE_HYPERCALL_BOUNCE(distance,
+ *max_nodes * *max_nodes * sizeof(*distance),
+ XC_HYPERCALL_BUFFER_BOUNCE_OUT);
+
+ if ( !!meminfo ^ !!distance )
+ {
+ errno = EINVAL;
+ return -1;
+ }
+
+ if ( (ret = xc_hypercall_bounce_pre(xch, meminfo)) )
+ goto out;
+ if ((ret = xc_hypercall_bounce_pre(xch, distance)) )
+ goto out;
+
+ sysctl.u.numainfo.num_nodes = *max_nodes;
+ set_xen_guest_handle(sysctl.u.numainfo.meminfo, meminfo);
+ set_xen_guest_handle(sysctl.u.numainfo.distance, distance);
sysctl.cmd = XEN_SYSCTL_numainfo;
- memcpy(&sysctl.u.numainfo, put_info, sizeof(*put_info));
+ if ( (ret = do_sysctl(xch, &sysctl)) != 0 )
+ goto out;
- if ((ret = do_sysctl(xch, &sysctl)) != 0)
- return ret;
+ *max_nodes = sysctl.u.numainfo.num_nodes;
- memcpy(put_info, &sysctl.u.numainfo, sizeof(*put_info));
+out:
+ xc_hypercall_bounce_post(xch, meminfo);
+ xc_hypercall_bounce_post(xch, distance);
- return 0;
+ return ret;
}
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index 697c86d..45cd318 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -5140,61 +5140,44 @@ libxl_cputopology *libxl_get_cpu_topology(libxl_ctx *ctx, int *nb_cpu_out)
libxl_numainfo *libxl_get_numainfo(libxl_ctx *ctx, int *nr)
{
GC_INIT(ctx);
- xc_numainfo_t ninfo;
- DECLARE_HYPERCALL_BUFFER(xen_sysctl_meminfo_t, meminfo);
- DECLARE_HYPERCALL_BUFFER(uint32_t, distance);
+ xc_meminfo_t *meminfo;
+ uint32_t *distance;
libxl_numainfo *ret = NULL;
int i, j;
+ unsigned num_nodes;
- set_xen_guest_handle(ninfo.meminfo, HYPERCALL_BUFFER_NULL);
- set_xen_guest_handle(ninfo.distance, HYPERCALL_BUFFER_NULL);
- if (xc_numainfo(ctx->xch, &ninfo) != 0) {
- LIBXL__LOG(ctx, XTL_ERROR, "Unable to determine number of NODES");
- ret = NULL;
+ if (xc_numainfo(ctx->xch, &num_nodes, NULL, NULL)) {
+ LOGEV(ERROR, errno, "Unable to determine number of nodes");
goto out;
}
- meminfo = xc_hypercall_buffer_alloc(ctx->xch, meminfo,
- sizeof(*meminfo) * ninfo.num_nodes);
- distance = xc_hypercall_buffer_alloc(ctx->xch, distance,
- sizeof(*distance) *
- ninfo.num_nodes * ninfo.num_nodes);
- if ((meminfo == NULL) || (distance == NULL)) {
- LIBXL__LOG_ERRNOVAL(ctx, XTL_ERROR, ENOMEM,
- "Unable to allocate hypercall arguments");
- goto fail;
- }
+ meminfo = libxl__zalloc(gc, sizeof(*meminfo) * num_nodes);
+ distance = libxl__zalloc(gc, sizeof(*distance) * num_nodes * num_nodes);
- set_xen_guest_handle(ninfo.meminfo, meminfo);
- set_xen_guest_handle(ninfo.distance, distance);
- if (xc_numainfo(ctx->xch, &ninfo) != 0) {
- LIBXL__LOG_ERRNO(ctx, LIBXL__LOG_ERROR, "getting numainfo");
- goto fail;
+ if (xc_numainfo(ctx->xch, &num_nodes, meminfo, distance)) {
+ LOGEV(ERROR, errno, "getting numainfo");
+ goto out;
}
- *nr = ninfo.num_nodes;
+ *nr = num_nodes;
- ret = libxl__zalloc(NOGC, sizeof(libxl_numainfo) * ninfo.num_nodes);
- for (i = 0; i < ninfo.num_nodes; i++)
- ret[i].dists = libxl__calloc(NOGC, ninfo.num_nodes, sizeof(*distance));
+ ret = libxl__zalloc(NOGC, sizeof(libxl_numainfo) * num_nodes);
+ for (i = 0; i < num_nodes; i++)
+ ret[i].dists = libxl__calloc(NOGC, num_nodes, sizeof(*distance));
- for (i = 0; i < ninfo.num_nodes; i++) {
+ for (i = 0; i < num_nodes; i++) {
#define V(val, invalid) (val == invalid) ? \
LIBXL_NUMAINFO_INVALID_ENTRY : val
ret[i].size = V(meminfo[i].memsize, XEN_INVALID_MEM_SZ);
ret[i].free = V(meminfo[i].memfree, XEN_INVALID_MEM_SZ);
- ret[i].num_dists = ninfo.num_nodes;
+ ret[i].num_dists = num_nodes;
for (j = 0; j < ret[i].num_dists; j++) {
- unsigned idx = i * ninfo.num_nodes + j;
+ unsigned idx = i * num_nodes + j;
ret[i].dists[j] = V(distance[idx], XEN_INVALID_NODE_DIST);
}
#undef V
}
- fail:
- xc_hypercall_buffer_free(ctx->xch, meminfo);
- xc_hypercall_buffer_free(ctx->xch, distance);
-
out:
GC_FREE;
return ret;
diff --git a/tools/python/xen/lowlevel/xc/xc.c b/tools/python/xen/lowlevel/xc/xc.c
index 21ba57d..fbd93db 100644
--- a/tools/python/xen/lowlevel/xc/xc.c
+++ b/tools/python/xen/lowlevel/xc/xc.c
@@ -1293,33 +1293,23 @@ out:
static PyObject *pyxc_numainfo(XcObject *self)
{
- xc_numainfo_t ninfo = { 0 };
- unsigned i, j;
+ unsigned i, j, num_nodes;
uint64_t free_heap;
PyObject *ret_obj = NULL, *node_to_node_dist_list_obj;
PyObject *node_to_memsize_obj, *node_to_memfree_obj;
PyObject *node_to_dma32_mem_obj, *node_to_node_dist_obj;
- DECLARE_HYPERCALL_BUFFER(xen_sysctl_meminfo_t, meminfo);
- DECLARE_HYPERCALL_BUFFER(uint32_t, distance);
+ xc_meminfo_t *meminfo = NULL;
+ uint32_t *distance = NULL;
- set_xen_guest_handle(ninfo.meminfo, HYPERCALL_BUFFER_NULL);
- set_xen_guest_handle(ninfo.distance, HYPERCALL_BUFFER_NULL);
- if ( xc_numainfo(self->xc_handle, &ninfo) != 0 )
+ if ( xc_numainfo(self->xc_handle, &num_nodes, NULL, NULL) != 0 )
goto out;
- meminfo = xc_hypercall_buffer_alloc(self->xc_handle, meminfo,
- sizeof(*meminfo) * ninfo.num_nodes);
- if ( meminfo == NULL )
- goto out;
- distance = xc_hypercall_buffer_alloc(self->xc_handle, distance,
- sizeof(*distance) *
- ninfo.num_nodes * ninfo.num_nodes);
- if ( distance == NULL )
+ meminfo = calloc(num_nodes, sizeof(*meminfo));
+ distance = calloc(num_nodes * num_nodes, sizeof(*distance));
+ if ( (meminfo == NULL) || (distance == NULL) )
goto out;
- set_xen_guest_handle(ninfo.meminfo, meminfo);
- set_xen_guest_handle(ninfo.distance, distance);
- if ( xc_numainfo(self->xc_handle, &ninfo) != 0 )
+ if ( xc_numainfo(self->xc_handle, &num_nodes, meminfo, distance) != 0 )
goto out;
/* Construct node-to-* lists. */
@@ -1327,7 +1317,7 @@ static PyObject *pyxc_numainfo(XcObject *self)
node_to_memfree_obj = PyList_New(0);
node_to_dma32_mem_obj = PyList_New(0);
node_to_node_dist_list_obj = PyList_New(0);
- for ( i = 0; i < ninfo.num_nodes; i++ )
+ for ( i = 0; i < num_nodes; i++ )
{
PyObject *pyint;
unsigned invalid_node;
@@ -1351,9 +1341,9 @@ static PyObject *pyxc_numainfo(XcObject *self)
/* Node to Node Distance */
node_to_node_dist_obj = PyList_New(0);
invalid_node = (meminfo[i].memsize == XEN_INVALID_MEM_SZ);
- for ( j = 0; j < ninfo.num_nodes; j++ )
+ for ( j = 0; j < num_nodes; j++ )
{
- uint32_t dist = distance[i * ninfo.num_nodes + j];
+ uint32_t dist = distance[i * num_nodes + j];
if ( invalid_node || (dist == XEN_INVALID_NODE_DIST) )
{
PyList_Append(node_to_node_dist_obj, Py_None);
@@ -1369,7 +1359,7 @@ static PyObject *pyxc_numainfo(XcObject *self)
Py_DECREF(node_to_node_dist_obj);
}
- ret_obj = Py_BuildValue("{s:i}", "max_node_index", ninfo.num_nodes + 1);
+ ret_obj = Py_BuildValue("{s:i}", "max_node_index", num_nodes + 1);
PyDict_SetItemString(ret_obj, "node_memsize", node_to_memsize_obj);
Py_DECREF(node_to_memsize_obj);
@@ -1385,8 +1375,8 @@ static PyObject *pyxc_numainfo(XcObject *self)
Py_DECREF(node_to_node_dist_list_obj);
out:
- xc_hypercall_buffer_free(self->xc_handle, meminfo);
- xc_hypercall_buffer_free(self->xc_handle, distance);
+ free(meminfo);
+ free(distance);
return ret_obj ? ret_obj : pyxc_error_to_exception(self->xc_handle);
}
--
1.7.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v6 5/5] libxl: Add interface for querying hypervisor about PCI topology
2015-04-06 22:12 [PATCH v6 0/5] Display IO topology when PXM data is available (plus some cleanup) Boris Ostrovsky
` (3 preceding siblings ...)
2015-04-06 22:12 ` [PATCH v6 4/5] libxl/libxc: Move libxl_get_numainfo()'s " Boris Ostrovsky
@ 2015-04-06 22:12 ` Boris Ostrovsky
2015-04-15 12:35 ` Ian Campbell
4 siblings, 1 reply; 19+ messages in thread
From: Boris Ostrovsky @ 2015-04-06 22:12 UTC (permalink / raw)
To: ian.jackson, ian.campbell, wei.liu2, stefano.stabellini, dgdegra,
jbeulich, andrew.cooper3, keir
Cc: elena.ufimtseva, dario.faggioli, boris.ostrovsky, xen-devel
.. and use this new interface to display it along with CPU topology
and NUMA information when 'xl info -n' command is issued
The output will look like
...
cpu_topology :
cpu: core socket node
0: 0 0 0
...
device topology :
device node
0000:00:00.0 0
0000:00:01.0 0
...
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
---
Changes in v6:
* xc_pcitopoinfo() now has to deal with hypercall not finishing processing whole
array (due to changes in patch 2): do_sysctl() is now called in a loop).
tools/libxc/include/xenctrl.h | 3 ++
tools/libxc/xc_misc.c | 44 ++++++++++++++++++++++++++
tools/libxl/libxl.c | 42 +++++++++++++++++++++++++
tools/libxl/libxl.h | 12 +++++++
tools/libxl/libxl_freebsd.c | 12 +++++++
tools/libxl/libxl_internal.h | 5 +++
tools/libxl/libxl_linux.c | 69 +++++++++++++++++++++++++++++++++++++++++
tools/libxl/libxl_netbsd.c | 12 +++++++
tools/libxl/libxl_types.idl | 7 ++++
tools/libxl/libxl_utils.c | 8 +++++
tools/libxl/xl_cmdimpl.c | 40 +++++++++++++++++++----
11 files changed, 247 insertions(+), 7 deletions(-)
diff --git a/tools/libxc/include/xenctrl.h b/tools/libxc/include/xenctrl.h
index 4cf8daf..787c29d 100644
--- a/tools/libxc/include/xenctrl.h
+++ b/tools/libxc/include/xenctrl.h
@@ -1229,6 +1229,7 @@ typedef xen_sysctl_physinfo_t xc_physinfo_t;
typedef xen_sysctl_cputopo_t xc_cputopo_t;
typedef xen_sysctl_numainfo_t xc_numainfo_t;
typedef xen_sysctl_meminfo_t xc_meminfo_t;
+typedef xen_sysctl_pcitopoinfo_t xc_pcitopoinfo_t;
typedef uint32_t xc_cpu_to_node_t;
typedef uint32_t xc_cpu_to_socket_t;
@@ -1242,6 +1243,8 @@ int xc_cputopoinfo(xc_interface *xch, unsigned *max_cpus,
xc_cputopo_t *cputopo);
int xc_numainfo(xc_interface *xch, unsigned *max_nodes,
xc_meminfo_t *meminfo, uint32_t *distance);
+int xc_pcitopoinfo(xc_interface *xch, unsigned num_devs,
+ physdev_pci_device_t *devs, uint32_t *nodes);
int xc_sched_id(xc_interface *xch,
int *sched_id);
diff --git a/tools/libxc/xc_misc.c b/tools/libxc/xc_misc.c
index 97cbe63..6e1d50e 100644
--- a/tools/libxc/xc_misc.c
+++ b/tools/libxc/xc_misc.c
@@ -244,6 +244,50 @@ out:
return ret;
}
+int xc_pcitopoinfo(xc_interface *xch, unsigned num_devs,
+ physdev_pci_device_t *devs,
+ uint32_t *nodes)
+{
+ int ret = 0;
+ DECLARE_SYSCTL;
+ DECLARE_HYPERCALL_BOUNCE(devs, num_devs * sizeof(*devs),
+ XC_HYPERCALL_BUFFER_BOUNCE_IN);
+ DECLARE_HYPERCALL_BOUNCE(nodes, num_devs* sizeof(*nodes),
+ XC_HYPERCALL_BUFFER_BOUNCE_BOTH);
+
+ if ( (ret = xc_hypercall_bounce_pre(xch, devs)) )
+ goto out;
+ if ( (ret = xc_hypercall_bounce_pre(xch, nodes)) )
+ goto out;
+
+ sysctl.u.pcitopoinfo.first_dev = 0;
+ sysctl.u.pcitopoinfo.num_devs = num_devs;
+ set_xen_guest_handle(sysctl.u.pcitopoinfo.devs, devs);
+ set_xen_guest_handle(sysctl.u.pcitopoinfo.nodes, nodes);
+
+ sysctl.cmd = XEN_SYSCTL_pcitopoinfo;
+
+ while ( sysctl.u.pcitopoinfo.first_dev < num_devs )
+ {
+ if ( (ret = do_sysctl(xch, &sysctl)) != 0 )
+ {
+ /*
+ * node[] is set to XEN_INVALID_NODE_ID for invalid devices,
+ * we can just skip those entries.
+ */
+ if ( errno == ENODEV )
+ errno = ret = 0;
+ else
+ break;
+ }
+ }
+
+ out:
+ xc_hypercall_bounce_post(xch, devs);
+ xc_hypercall_bounce_post(xch, nodes);
+
+ return ret;
+}
int xc_sched_id(xc_interface *xch,
int *sched_id)
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index 45cd318..5b3423d 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -5137,6 +5137,48 @@ libxl_cputopology *libxl_get_cpu_topology(libxl_ctx *ctx, int *nb_cpu_out)
return ret;
}
+libxl_pcitopology *libxl_get_pci_topology(libxl_ctx *ctx, int *num_devs)
+{
+ GC_INIT(ctx);
+ physdev_pci_device_t *devs;
+ uint32_t *nodes;
+ libxl_pcitopology *ret = NULL;
+ int i;
+
+ *num_devs = libxl__pci_numdevs(gc);
+ if (*num_devs < 0) {
+ LOG(ERROR, "Unable to determine number of PCI devices");
+ goto out;
+ }
+
+ devs = libxl__zalloc(gc, sizeof(*devs) * *num_devs);
+ nodes = libxl__zalloc(gc, sizeof(*nodes) * *num_devs);
+
+ if (libxl__pci_topology_init(gc, devs, *num_devs)) {
+ LOGE(ERROR, "Cannot initialize PCI hypercall structure");
+ goto out;
+ }
+
+ if (xc_pcitopoinfo(ctx->xch, *num_devs, devs, nodes) != 0) {
+ LOGE(ERROR, "PCI topology info hypercall failed");
+ goto out;
+ }
+
+ ret = libxl__zalloc(NOGC, sizeof(libxl_pcitopology) * *num_devs);
+
+ for (i = 0; i < *num_devs; i++) {
+ ret[i].seg = devs[i].seg;
+ ret[i].bus = devs[i].bus;
+ ret[i].devfn = devs[i].devfn;
+ ret[i].node = (nodes[i] == XEN_INVALID_NODE_ID) ?
+ LIBXL_PCITOPOLOGY_INVALID_ENTRY : nodes[i];
+ }
+
+ out:
+ GC_FREE;
+ return ret;
+}
+
libxl_numainfo *libxl_get_numainfo(libxl_ctx *ctx, int *nr)
{
GC_INIT(ctx);
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index 6bc75c5..f0db4d5 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -736,6 +736,14 @@ void libxl_mac_copy(libxl_ctx *ctx, libxl_mac *dst, libxl_mac *src);
#define LIBXL_HAVE_PSR_MBM 1
#endif
+/*
+ * LIBXL_HAVE_PCITOPOLOGY
+ *
+ * If this is defined, then interface to query hypervisor about PCI device
+ * topology is available.
+ */
+#define LIBXL_HAVE_PCITOPOLOGY 1
+
typedef char **libxl_string_list;
void libxl_string_list_dispose(libxl_string_list *sl);
int libxl_string_list_length(const libxl_string_list *sl);
@@ -1126,6 +1134,10 @@ void libxl_vminfo_list_free(libxl_vminfo *list, int nb_vm);
libxl_cputopology *libxl_get_cpu_topology(libxl_ctx *ctx, int *nb_cpu_out);
void libxl_cputopology_list_free(libxl_cputopology *, int nb_cpu);
+#define LIBXL_PCITOPOLOGY_INVALID_ENTRY (~(uint32_t)0)
+libxl_pcitopology *libxl_get_pci_topology(libxl_ctx *ctx, int *num_devs);
+void libxl_pcitopology_list_free(libxl_pcitopology *, int num_devs);
+
#define LIBXL_NUMAINFO_INVALID_ENTRY (~(uint32_t)0)
libxl_numainfo *libxl_get_numainfo(libxl_ctx *ctx, int *nr);
void libxl_numainfo_list_free(libxl_numainfo *, int nr);
diff --git a/tools/libxl/libxl_freebsd.c b/tools/libxl/libxl_freebsd.c
index e8b88b3..47c3391 100644
--- a/tools/libxl/libxl_freebsd.c
+++ b/tools/libxl/libxl_freebsd.c
@@ -131,3 +131,15 @@ libxl_device_model_version libxl__default_device_model(libxl__gc *gc)
{
return LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN;
}
+
+int libxl__pci_numdevs(libxl__gc *gc)
+{
+ return ERROR_NI;
+}
+
+int libxl__pci_topology_init(libxl__gc *gc,
+ physdev_pci_device_t *devs,
+ int num_devs)
+{
+ return ERROR_NI;
+}
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 7f81dd3..c986f6a 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -1190,6 +1190,11 @@ _hidden int libxl__try_phy_backend(mode_t st_mode);
_hidden char *libxl__devid_to_localdev(libxl__gc *gc, int devid);
+_hidden int libxl__pci_numdevs(libxl__gc *gc);
+_hidden int libxl__pci_topology_init(libxl__gc *gc,
+ physdev_pci_device_t *devs,
+ int num_devs);
+
/* from libxl_pci */
_hidden int libxl__device_pci_add(libxl__gc *gc, uint32_t domid, libxl_device_pci *pcidev, int starting);
diff --git a/tools/libxl/libxl_linux.c b/tools/libxl/libxl_linux.c
index b51930c..be76c6f 100644
--- a/tools/libxl/libxl_linux.c
+++ b/tools/libxl/libxl_linux.c
@@ -279,3 +279,72 @@ libxl_device_model_version libxl__default_device_model(libxl__gc *gc)
{
return LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN;
}
+
+int libxl__pci_numdevs(libxl__gc *gc)
+{
+ DIR *dir;
+ struct dirent *entry;
+ int num_devs = 0;
+
+ dir = opendir("/sys/bus/pci/devices");
+ if (!dir) {
+ LOGEV(ERROR, errno, "Cannot open /sys/bus/pci/devices");
+ return ERROR_FAIL;
+ }
+
+ while ((entry = readdir(dir))) {
+ if (entry->d_name[0] == '.')
+ continue;
+ num_devs++;
+ }
+ closedir(dir);
+
+ return num_devs;
+}
+
+int libxl__pci_topology_init(libxl__gc *gc,
+ physdev_pci_device_t *devs,
+ int num_devs)
+{
+
+ DIR *dir;
+ struct dirent *entry;
+ int i, err = 0;
+
+ dir = opendir("/sys/bus/pci/devices");
+ if (!dir) {
+ LOGEV(ERROR, errno, "Cannot open /sys/bus/pci/devices");
+ return ERROR_FAIL;
+ }
+
+ i = 0;
+ while ((entry = readdir(dir))) {
+ unsigned int dom, bus, dev, func;
+
+ if (entry->d_name[0] == '.')
+ continue;
+
+ if (i == num_devs) {
+ LOGE(ERROR, "Too many devices\n");
+ err = ERROR_FAIL;
+ goto out;
+ }
+
+ if (sscanf(entry->d_name, "%x:%x:%x.%d", &dom, &bus, &dev, &func) < 4) {
+ LOGEV(ERROR, errno, "Error processing /sys/bus/pci/devices");
+ err = ERROR_FAIL;
+ goto out;
+ }
+
+ devs[i].seg = dom;
+ devs[i].bus = bus;
+ devs[i].devfn = ((dev & 0x1f) << 3) | (func & 7);
+
+ i++;
+ }
+
+ out:
+ closedir(dir);
+
+ return err;
+}
diff --git a/tools/libxl/libxl_netbsd.c b/tools/libxl/libxl_netbsd.c
index 898e160..a2a962e 100644
--- a/tools/libxl/libxl_netbsd.c
+++ b/tools/libxl/libxl_netbsd.c
@@ -95,3 +95,15 @@ libxl_device_model_version libxl__default_device_model(libxl__gc *gc)
{
return LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN_TRADITIONAL;
}
+
+int libxl__pci_numdevs(libxl__gc *gc)
+{
+ return ERROR_NI;
+}
+
+int libxl__pci_topology_init(libxl__gc *gc,
+ physdev_pci_device_t *devs,
+ int num_devs)
+{
+ return ERROR_NI;
+}
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 0866433..cd6f230 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -655,6 +655,13 @@ libxl_cputopology = Struct("cputopology", [
("node", uint32),
], dir=DIR_OUT)
+libxl_pcitopology = Struct("pcitopology", [
+ ("seg", uint16),
+ ("bus", uint8),
+ ("devfn", uint8),
+ ("node", uint32),
+ ], dir=DIR_OUT)
+
libxl_sched_credit_params = Struct("sched_credit_params", [
("tslice_ms", integer),
("ratelimit_us", integer),
diff --git a/tools/libxl/libxl_utils.c b/tools/libxl/libxl_utils.c
index 9053b27..9108b56 100644
--- a/tools/libxl/libxl_utils.c
+++ b/tools/libxl/libxl_utils.c
@@ -882,6 +882,14 @@ void libxl_cputopology_list_free(libxl_cputopology *list, int nr)
free(list);
}
+void libxl_pcitopology_list_free(libxl_pcitopology *list, int nr)
+{
+ int i;
+ for (i = 0; i < nr; i++)
+ libxl_pcitopology_dispose(&list[i]);
+ free(list);
+}
+
void libxl_numainfo_list_free(libxl_numainfo *list, int nr)
{
int i;
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index 394b55d..64c9961 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -5405,12 +5405,15 @@ static void output_numainfo(void)
static void output_topologyinfo(void)
{
- libxl_cputopology *info;
+ libxl_cputopology *cpuinfo;
int i, nr;
+ libxl_pcitopology *pciinfo;
+ int valid_devs;
- info = libxl_get_cpu_topology(ctx, &nr);
- if (info == NULL) {
- fprintf(stderr, "libxl_get_topologyinfo failed.\n");
+
+ cpuinfo = libxl_get_cpu_topology(ctx, &nr);
+ if (cpuinfo == NULL) {
+ fprintf(stderr, "libxl_get_cpu_topology failed.\n");
return;
}
@@ -5418,12 +5421,35 @@ static void output_topologyinfo(void)
printf("cpu: core socket node\n");
for (i = 0; i < nr; i++) {
- if (info[i].core != LIBXL_CPUTOPOLOGY_INVALID_ENTRY)
+ if (cpuinfo[i].core != LIBXL_CPUTOPOLOGY_INVALID_ENTRY)
printf("%3d: %4d %4d %4d\n", i,
- info[i].core, info[i].socket, info[i].node);
+ cpuinfo[i].core, cpuinfo[i].socket, cpuinfo[i].node);
+ }
+
+ libxl_cputopology_list_free(cpuinfo, nr);
+
+ pciinfo = libxl_get_pci_topology(ctx, &nr);
+ if (cpuinfo == NULL) {
+ fprintf(stderr, "libxl_get_pci_topology failed.\n");
+ return;
}
- libxl_cputopology_list_free(info, nr);
+ printf("device topology :\n");
+ printf("device node\n");
+ for (i = 0; i < nr; i++) {
+ if (pciinfo[i].node != LIBXL_PCITOPOLOGY_INVALID_ENTRY) {
+ printf("%04x:%02x:%02x.%01x %d\n", pciinfo[i].seg,
+ pciinfo[i].bus,
+ ((pciinfo[i].devfn >> 3) & 0x1f), (pciinfo[i].devfn & 7),
+ pciinfo[i].node);
+ valid_devs++;
+ }
+ }
+
+ if (valid_devs == 0)
+ printf("No device topology data available\n");
+
+ libxl_pcitopology_list_free(pciinfo, nr);
return;
}
--
1.7.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* Re: [PATCH v6 1/5] sysctl: Make XEN_SYSCTL_numainfo a little more efficient
2015-04-06 22:12 ` [PATCH v6 1/5] sysctl: Make XEN_SYSCTL_numainfo a little more efficient Boris Ostrovsky
@ 2015-04-07 16:04 ` Andrew Cooper
2015-04-07 16:57 ` Boris Ostrovsky
0 siblings, 1 reply; 19+ messages in thread
From: Andrew Cooper @ 2015-04-07 16:04 UTC (permalink / raw)
To: Boris Ostrovsky, ian.jackson, ian.campbell, wei.liu2,
stefano.stabellini, dgdegra, jbeulich, keir
Cc: elena.ufimtseva, dario.faggioli, xen-devel
On 06/04/15 23:12, Boris Ostrovsky wrote:
> A number of changes to XEN_SYSCTL_numainfo interface:
>
> * Make sysctl NUMA topology query use fewer copies by combining some
> fields into a single structure and copying distances for each node
> in a single copy.
> * NULL meminfo and distance handles are a request for maximum number
> of nodes (num_nodes). If those handles are valid and num_nodes is
> is smaller than the number of nodes in the system then -ENOBUFS is
> returned (and correct num_nodes is provided)
> * Instead of using max_node_index for passing number of nodes keep this
> value in num_nodes: almost all uses of max_node_index required adding
> or subtracting one to eventually get to number of nodes anyway.
> * Replace INVALID_NUMAINFO_ID with XEN_INVALID_MEM_SZ and add
> XEN_INVALID_NODE_DIST.
>
> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
> Acked-by: Ian Campbell <ian.campbell@citrix.com>
This subtly changes the behaviour of XEN_SYSCTL_numainfo with regards to
NULL guest handles.
Previously, a caller was able to select which information they wanted by
choosing which guest handles were non-NULL.
With the new semantics, the caller must pass both ni->meminfo and
ni->distance to get either bit of information. Each
copy_to_guest_offset() should be gated on a !guest_handle_is_null() so a
caller can request meminfo information without distance information.
~Andrew
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v6 2/5] sysctl: Add sysctl interface for querying PCI topology
2015-04-06 22:12 ` [PATCH v6 2/5] sysctl: Add sysctl interface for querying PCI topology Boris Ostrovsky
@ 2015-04-07 16:09 ` Andrew Cooper
2015-04-07 17:05 ` Boris Ostrovsky
2015-04-07 17:22 ` Daniel De Graaf
1 sibling, 1 reply; 19+ messages in thread
From: Andrew Cooper @ 2015-04-07 16:09 UTC (permalink / raw)
To: Boris Ostrovsky, ian.jackson, ian.campbell, wei.liu2,
stefano.stabellini, dgdegra, jbeulich, keir
Cc: elena.ufimtseva, dario.faggioli, xen-devel
On 06/04/15 23:12, Boris Ostrovsky wrote:
> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
> ---
>
> Changes in v6:
> * Dropped continuations, the sysctl now returns after 64 iteration if necessary
Why? The caller should reasonably expect a single hypercall to complete,
not to have to reissue repeated to get all the data they want.
> * -ENODEV returned if device is not found
You don't actually break on -ENODEV, which causes the loop to continue
to new devices and leave no hint as to which device doesn't exist.
~Andrew
> * sysctl's first_dev is now expected to be used by userspace to continue the query
> * Added XSM hooks
>
> docs/misc/xsm-flask.txt | 1 +
> xen/common/sysctl.c | 58 +++++++++++++++++++++++++++++++++++
> xen/include/public/sysctl.h | 30 ++++++++++++++++++
> xen/xsm/flask/hooks.c | 1 +
> xen/xsm/flask/policy/access_vectors | 1 +
> 5 files changed, 91 insertions(+), 0 deletions(-)
>
> diff --git a/docs/misc/xsm-flask.txt b/docs/misc/xsm-flask.txt
> index 90a2aef..4e0f14f 100644
> --- a/docs/misc/xsm-flask.txt
> +++ b/docs/misc/xsm-flask.txt
> @@ -121,6 +121,7 @@ __HYPERVISOR_sysctl (xen/include/public/sysctl.h)
> * XEN_SYSCTL_cpupool_op
> * XEN_SYSCTL_scheduler_op
> * XEN_SYSCTL_coverage_op
> + * XEN_SYSCTL_pcitopoinfo
>
> __HYPERVISOR_memory_op (xen/include/public/memory.h)
>
> diff --git a/xen/common/sysctl.c b/xen/common/sysctl.c
> index d75440e..449ff70 100644
> --- a/xen/common/sysctl.c
> +++ b/xen/common/sysctl.c
> @@ -399,6 +399,64 @@ long do_sysctl(XEN_GUEST_HANDLE_PARAM(xen_sysctl_t) u_sysctl)
> break;
> #endif
>
> +#ifdef HAS_PCI
> + case XEN_SYSCTL_pcitopoinfo:
> + {
> + xen_sysctl_pcitopoinfo_t *ti = &op->u.pcitopoinfo;
> + unsigned dev_cnt = 0;
> +
> + if ( guest_handle_is_null(ti->devs) ||
> + guest_handle_is_null(ti->nodes) ||
> + (ti->first_dev > ti->num_devs) )
> + {
> + ret = -EINVAL;
> + break;
> + }
> +
> + while ( ti->first_dev < ti->num_devs )
> + {
> + physdev_pci_device_t dev;
> + uint32_t node;
> + struct pci_dev *pdev;
> +
> + if ( copy_from_guest_offset(&dev, ti->devs, ti->first_dev, 1) )
> + {
> + ret = -EFAULT;
> + break;
> + }
> +
> + spin_lock(&pcidevs_lock);
> + pdev = pci_get_pdev(dev.seg, dev.bus, dev.devfn);
> + if ( !pdev )
> + {
> + ret = -ENODEV;
> + node = XEN_INVALID_NODE_ID;
> + }
> + else if ( pdev->node == NUMA_NO_NODE )
> + node = XEN_INVALID_NODE_ID;
> + else
> + node = pdev->node;
> + spin_unlock(&pcidevs_lock);
> +
> + if ( copy_to_guest_offset(ti->nodes, ti->first_dev, &node, 1) )
> + {
> + ret = -EFAULT;
> + break;
> + }
> +
> + ti->first_dev++;
> +
> + if ( (++dev_cnt > 0x3f) && hypercall_preempt_check() )
> + break;
> + }
> +
> + if ( (ret != -EFAULT) &&
> + __copy_field_to_guest(u_sysctl, op, u.pcitopoinfo.first_dev) )
> + ret = -EFAULT;
> + }
> + break;
> +#endif
> +
> default:
> ret = arch_do_sysctl(op, u_sysctl);
> copyback = 0;
> diff --git a/xen/include/public/sysctl.h b/xen/include/public/sysctl.h
> index 5aa3708..877b661 100644
> --- a/xen/include/public/sysctl.h
> +++ b/xen/include/public/sysctl.h
> @@ -33,6 +33,7 @@
>
> #include "xen.h"
> #include "domctl.h"
> +#include "physdev.h"
>
> #define XEN_SYSCTL_INTERFACE_VERSION 0x0000000C
>
> @@ -668,6 +669,33 @@ struct xen_sysctl_psr_cmt_op {
> typedef struct xen_sysctl_psr_cmt_op xen_sysctl_psr_cmt_op_t;
> DEFINE_XEN_GUEST_HANDLE(xen_sysctl_psr_cmt_op_t);
>
> +/* XEN_SYSCTL_pcitopoinfo */
> +struct xen_sysctl_pcitopoinfo {
> + /* IN: Number of elements in 'pcitopo' and 'nodes' arrays. */
> + uint32_t num_devs;
> +
> + /*
> + * IN/OUT:
> + * IN: First element of pcitopo array that needs to be processed by
> + * the hypervisor.
> + * OUT: Index of the first still unprocessed element of pcitopo array.
> + */
> + uint32_t first_dev;
> +
> + /* IN: list of devices for which node IDs are requested. */
> + XEN_GUEST_HANDLE_64(physdev_pci_device_t) devs;
> +
> + /*
> + * OUT: node identifier for each device.
> + * If information for a particular device is not avalable then set
> + * to XEN_INVALID_NODE_ID. In addition, if device is not known to the
> + * hypervisor, sysctl will stop further processing and return -ENODEV.
> + */
> + XEN_GUEST_HANDLE_64(uint32) nodes;
> +};
> +typedef struct xen_sysctl_pcitopoinfo xen_sysctl_pcitopoinfo_t;
> +DEFINE_XEN_GUEST_HANDLE(xen_sysctl_pcitopoinfo_t);
> +
> struct xen_sysctl {
> uint32_t cmd;
> #define XEN_SYSCTL_readconsole 1
> @@ -690,12 +718,14 @@ struct xen_sysctl {
> #define XEN_SYSCTL_scheduler_op 19
> #define XEN_SYSCTL_coverage_op 20
> #define XEN_SYSCTL_psr_cmt_op 21
> +#define XEN_SYSCTL_pcitopoinfo 22
> uint32_t interface_version; /* XEN_SYSCTL_INTERFACE_VERSION */
> union {
> struct xen_sysctl_readconsole readconsole;
> struct xen_sysctl_tbuf_op tbuf_op;
> struct xen_sysctl_physinfo physinfo;
> struct xen_sysctl_cputopoinfo cputopoinfo;
> + struct xen_sysctl_pcitopoinfo pcitopoinfo;
> struct xen_sysctl_numainfo numainfo;
> struct xen_sysctl_sched_id sched_id;
> struct xen_sysctl_perfc_op perfc_op;
> diff --git a/xen/xsm/flask/hooks.c b/xen/xsm/flask/hooks.c
> index 4e2c1b7..da7cdfd 100644
> --- a/xen/xsm/flask/hooks.c
> +++ b/xen/xsm/flask/hooks.c
> @@ -785,6 +785,7 @@ static int flask_sysctl(int cmd)
> case XEN_SYSCTL_physinfo:
> case XEN_SYSCTL_cputopoinfo:
> case XEN_SYSCTL_numainfo:
> + case XEN_SYSCTL_pcitopoinfo:
> return domain_has_xen(current->domain, XEN__PHYSINFO);
>
> case XEN_SYSCTL_psr_cmt_op:
> diff --git a/xen/xsm/flask/policy/access_vectors b/xen/xsm/flask/policy/access_vectors
> index fe5406d..6e24a6e 100644
> --- a/xen/xsm/flask/policy/access_vectors
> +++ b/xen/xsm/flask/policy/access_vectors
> @@ -28,6 +28,7 @@ class xen
> # XENPF_microcode_update
> microcode
> # XEN_SYSCTL_physinfo, XEN_SYSCTL_cputopoinfo, XEN_SYSCTL_numainfo
> +# XEN_SYSCTL_pcitopoinfo
> physinfo
> # XENPF_platform_quirk
> quirk
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v6 1/5] sysctl: Make XEN_SYSCTL_numainfo a little more efficient
2015-04-07 16:04 ` Andrew Cooper
@ 2015-04-07 16:57 ` Boris Ostrovsky
2015-04-07 17:04 ` Andrew Cooper
2015-04-13 15:52 ` Jan Beulich
0 siblings, 2 replies; 19+ messages in thread
From: Boris Ostrovsky @ 2015-04-07 16:57 UTC (permalink / raw)
To: Andrew Cooper, ian.jackson, ian.campbell, wei.liu2,
stefano.stabellini, dgdegra, jbeulich, keir
Cc: elena.ufimtseva, dario.faggioli, xen-devel
On 04/07/2015 12:04 PM, Andrew Cooper wrote:
> On 06/04/15 23:12, Boris Ostrovsky wrote:
>> A number of changes to XEN_SYSCTL_numainfo interface:
>>
>> * Make sysctl NUMA topology query use fewer copies by combining some
>> fields into a single structure and copying distances for each node
>> in a single copy.
>> * NULL meminfo and distance handles are a request for maximum number
>> of nodes (num_nodes). If those handles are valid and num_nodes is
>> is smaller than the number of nodes in the system then -ENOBUFS is
>> returned (and correct num_nodes is provided)
>> * Instead of using max_node_index for passing number of nodes keep this
>> value in num_nodes: almost all uses of max_node_index required adding
>> or subtracting one to eventually get to number of nodes anyway.
>> * Replace INVALID_NUMAINFO_ID with XEN_INVALID_MEM_SZ and add
>> XEN_INVALID_NODE_DIST.
>>
>> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
>> Acked-by: Ian Campbell <ian.campbell@citrix.com>
> This subtly changes the behaviour of XEN_SYSCTL_numainfo with regards to
> NULL guest handles.
>
> Previously, a caller was able to select which information they wanted by
> choosing which guest handles were non-NULL.
>
> With the new semantics, the caller must pass both ni->meminfo and
> ni->distance to get either bit of information. Each
> copy_to_guest_offset() should be gated on a !guest_handle_is_null() so a
> caller can request meminfo information without distance information.
Currently the caller, in fact, can have either of three pointers
(node_to_memsize, node_to_memfree or node_to_node_distance) as NULL and
the hypervisor will fill whichever pointer is valid. Because I put the
first two together into a struct we are already changing behavior in
that regard. Not to mention that having all three as NULL now has new
meaning as well.
I thought that either both pointers should be valid or neither. If
people disagree I can change this.
-boris
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v6 1/5] sysctl: Make XEN_SYSCTL_numainfo a little more efficient
2015-04-07 16:57 ` Boris Ostrovsky
@ 2015-04-07 17:04 ` Andrew Cooper
2015-04-07 17:28 ` Boris Ostrovsky
2015-04-13 15:52 ` Jan Beulich
1 sibling, 1 reply; 19+ messages in thread
From: Andrew Cooper @ 2015-04-07 17:04 UTC (permalink / raw)
To: Boris Ostrovsky, ian.jackson, ian.campbell, wei.liu2,
stefano.stabellini, dgdegra, jbeulich, keir
Cc: elena.ufimtseva, dario.faggioli, xen-devel
On 07/04/15 17:57, Boris Ostrovsky wrote:
> On 04/07/2015 12:04 PM, Andrew Cooper wrote:
>> On 06/04/15 23:12, Boris Ostrovsky wrote:
>>> A number of changes to XEN_SYSCTL_numainfo interface:
>>>
>>> * Make sysctl NUMA topology query use fewer copies by combining some
>>> fields into a single structure and copying distances for each node
>>> in a single copy.
>>> * NULL meminfo and distance handles are a request for maximum number
>>> of nodes (num_nodes). If those handles are valid and num_nodes is
>>> is smaller than the number of nodes in the system then -ENOBUFS is
>>> returned (and correct num_nodes is provided)
>>> * Instead of using max_node_index for passing number of nodes keep this
>>> value in num_nodes: almost all uses of max_node_index required
>>> adding
>>> or subtracting one to eventually get to number of nodes anyway.
>>> * Replace INVALID_NUMAINFO_ID with XEN_INVALID_MEM_SZ and add
>>> XEN_INVALID_NODE_DIST.
>>>
>>> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
>>> Acked-by: Ian Campbell <ian.campbell@citrix.com>
>> This subtly changes the behaviour of XEN_SYSCTL_numainfo with regards to
>> NULL guest handles.
>>
>> Previously, a caller was able to select which information they wanted by
>> choosing which guest handles were non-NULL.
>>
>> With the new semantics, the caller must pass both ni->meminfo and
>> ni->distance to get either bit of information. Each
>> copy_to_guest_offset() should be gated on a !guest_handle_is_null() so a
>> caller can request meminfo information without distance information.
>
>
> Currently the caller, in fact, can have either of three pointers
> (node_to_memsize, node_to_memfree or node_to_node_distance) as NULL
> and the hypervisor will fill whichever pointer is valid. Because I put
> the first two together into a struct we are already changing behavior
> in that regard. Not to mention that having all three as NULL now has
> new meaning as well.
>
> I thought that either both pointers should be valid or neither. If
> people disagree I can change this.
I have a usecase (hwloc) which wants meminfo but not distance. In such
a case, the inner for loop can be skipped which is an advantage for Xen.
~Andrew
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v6 2/5] sysctl: Add sysctl interface for querying PCI topology
2015-04-07 16:09 ` Andrew Cooper
@ 2015-04-07 17:05 ` Boris Ostrovsky
0 siblings, 0 replies; 19+ messages in thread
From: Boris Ostrovsky @ 2015-04-07 17:05 UTC (permalink / raw)
To: Andrew Cooper, ian.jackson, ian.campbell, wei.liu2,
stefano.stabellini, dgdegra, jbeulich, keir
Cc: elena.ufimtseva, dario.faggioli, xen-devel
On 04/07/2015 12:09 PM, Andrew Cooper wrote:
> On 06/04/15 23:12, Boris Ostrovsky wrote:
>> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
>> ---
>>
>> Changes in v6:
>> * Dropped continuations, the sysctl now returns after 64 iteration if necessary
> Why? The caller should reasonably expect a single hypercall to complete,
> not to have to reissue repeated to get all the data they want.
The caller is expected to restart from first_dev, not from beginning.
>
>> * -ENODEV returned if device is not found
> You don't actually break on -ENODEV, which causes the loop to continue
> to new devices and leave no hint as to which device doesn't exist.
Doh, I must have lost the break during various merges.
-boris
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v6 2/5] sysctl: Add sysctl interface for querying PCI topology
2015-04-06 22:12 ` [PATCH v6 2/5] sysctl: Add sysctl interface for querying PCI topology Boris Ostrovsky
2015-04-07 16:09 ` Andrew Cooper
@ 2015-04-07 17:22 ` Daniel De Graaf
1 sibling, 0 replies; 19+ messages in thread
From: Daniel De Graaf @ 2015-04-07 17:22 UTC (permalink / raw)
To: Boris Ostrovsky, ian.jackson, ian.campbell, wei.liu2,
stefano.stabellini, jbeulich, andrew.cooper3, keir
Cc: elena.ufimtseva, dario.faggioli, xen-devel
On 04/06/2015 06:12 PM, Boris Ostrovsky wrote:
> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>.
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v6 1/5] sysctl: Make XEN_SYSCTL_numainfo a little more efficient
2015-04-07 17:04 ` Andrew Cooper
@ 2015-04-07 17:28 ` Boris Ostrovsky
2015-04-08 16:31 ` Andrew Cooper
0 siblings, 1 reply; 19+ messages in thread
From: Boris Ostrovsky @ 2015-04-07 17:28 UTC (permalink / raw)
To: Andrew Cooper, ian.jackson, ian.campbell, wei.liu2,
stefano.stabellini, dgdegra, jbeulich, keir
Cc: elena.ufimtseva, dario.faggioli, xen-devel
On 04/07/2015 01:04 PM, Andrew Cooper wrote:
> On 07/04/15 17:57, Boris Ostrovsky wrote:
>> On 04/07/2015 12:04 PM, Andrew Cooper wrote:
>>> On 06/04/15 23:12, Boris Ostrovsky wrote:
>>>> A number of changes to XEN_SYSCTL_numainfo interface:
>>>>
>>>> * Make sysctl NUMA topology query use fewer copies by combining some
>>>> fields into a single structure and copying distances for each node
>>>> in a single copy.
>>>> * NULL meminfo and distance handles are a request for maximum number
>>>> of nodes (num_nodes). If those handles are valid and num_nodes is
>>>> is smaller than the number of nodes in the system then -ENOBUFS is
>>>> returned (and correct num_nodes is provided)
>>>> * Instead of using max_node_index for passing number of nodes keep this
>>>> value in num_nodes: almost all uses of max_node_index required
>>>> adding
>>>> or subtracting one to eventually get to number of nodes anyway.
>>>> * Replace INVALID_NUMAINFO_ID with XEN_INVALID_MEM_SZ and add
>>>> XEN_INVALID_NODE_DIST.
>>>>
>>>> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
>>>> Acked-by: Ian Campbell <ian.campbell@citrix.com>
>>> This subtly changes the behaviour of XEN_SYSCTL_numainfo with regards to
>>> NULL guest handles.
>>>
>>> Previously, a caller was able to select which information they wanted by
>>> choosing which guest handles were non-NULL.
>>>
>>> With the new semantics, the caller must pass both ni->meminfo and
>>> ni->distance to get either bit of information. Each
>>> copy_to_guest_offset() should be gated on a !guest_handle_is_null() so a
>>> caller can request meminfo information without distance information.
>>
>> Currently the caller, in fact, can have either of three pointers
>> (node_to_memsize, node_to_memfree or node_to_node_distance) as NULL
>> and the hypervisor will fill whichever pointer is valid. Because I put
>> the first two together into a struct we are already changing behavior
>> in that regard. Not to mention that having all three as NULL now has
>> new meaning as well.
>>
>> I thought that either both pointers should be valid or neither. If
>> people disagree I can change this.
> I have a usecase (hwloc) which wants meminfo but not distance. In such
> a case, the inner for loop can be skipped which is an advantage for Xen.
Are you planning on calling sysctls directly from your hwloc extension?
Why not go via libxl which is a stable interface AFAIUI.
-boris
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v6 1/5] sysctl: Make XEN_SYSCTL_numainfo a little more efficient
2015-04-07 17:28 ` Boris Ostrovsky
@ 2015-04-08 16:31 ` Andrew Cooper
0 siblings, 0 replies; 19+ messages in thread
From: Andrew Cooper @ 2015-04-08 16:31 UTC (permalink / raw)
To: Boris Ostrovsky, ian.jackson, ian.campbell, wei.liu2,
stefano.stabellini, dgdegra, jbeulich, keir
Cc: elena.ufimtseva, dario.faggioli, xen-devel
On 07/04/15 18:28, Boris Ostrovsky wrote:
> On 04/07/2015 01:04 PM, Andrew Cooper wrote:
>> On 07/04/15 17:57, Boris Ostrovsky wrote:
>>> On 04/07/2015 12:04 PM, Andrew Cooper wrote:
>>>> On 06/04/15 23:12, Boris Ostrovsky wrote:
>>>>> A number of changes to XEN_SYSCTL_numainfo interface:
>>>>>
>>>>> * Make sysctl NUMA topology query use fewer copies by combining some
>>>>> fields into a single structure and copying distances for each
>>>>> node
>>>>> in a single copy.
>>>>> * NULL meminfo and distance handles are a request for maximum number
>>>>> of nodes (num_nodes). If those handles are valid and num_nodes is
>>>>> is smaller than the number of nodes in the system then
>>>>> -ENOBUFS is
>>>>> returned (and correct num_nodes is provided)
>>>>> * Instead of using max_node_index for passing number of nodes keep
>>>>> this
>>>>> value in num_nodes: almost all uses of max_node_index required
>>>>> adding
>>>>> or subtracting one to eventually get to number of nodes anyway.
>>>>> * Replace INVALID_NUMAINFO_ID with XEN_INVALID_MEM_SZ and add
>>>>> XEN_INVALID_NODE_DIST.
>>>>>
>>>>> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
>>>>> Acked-by: Ian Campbell <ian.campbell@citrix.com>
>>>> This subtly changes the behaviour of XEN_SYSCTL_numainfo with
>>>> regards to
>>>> NULL guest handles.
>>>>
>>>> Previously, a caller was able to select which information they
>>>> wanted by
>>>> choosing which guest handles were non-NULL.
>>>>
>>>> With the new semantics, the caller must pass both ni->meminfo and
>>>> ni->distance to get either bit of information. Each
>>>> copy_to_guest_offset() should be gated on a !guest_handle_is_null()
>>>> so a
>>>> caller can request meminfo information without distance information.
>>>
>>> Currently the caller, in fact, can have either of three pointers
>>> (node_to_memsize, node_to_memfree or node_to_node_distance) as NULL
>>> and the hypervisor will fill whichever pointer is valid. Because I put
>>> the first two together into a struct we are already changing behavior
>>> in that regard. Not to mention that having all three as NULL now has
>>> new meaning as well.
>>>
>>> I thought that either both pointers should be valid or neither. If
>>> people disagree I can change this.
>> I have a usecase (hwloc) which wants meminfo but not distance. In such
>> a case, the inner for loop can be skipped which is an advantage for Xen.
>
> Are you planning on calling sysctls directly from your hwloc
> extension? Why not go via libxl which is a stable interface AFAIUI.
I did when experimenting. Not sure going forwards, but probably libxl
for API reasons.
Still, for the sake of two guest_handle_is_null() checks, I think we
should keep the ability to choose a subset of the information returned.
Consider some statistics daemon wanting to periodically poll for memory
usage on certain nodes without wanting the distance matrix each time.
~Andrew
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v6 1/5] sysctl: Make XEN_SYSCTL_numainfo a little more efficient
2015-04-07 16:57 ` Boris Ostrovsky
2015-04-07 17:04 ` Andrew Cooper
@ 2015-04-13 15:52 ` Jan Beulich
2015-04-15 12:29 ` Ian Campbell
1 sibling, 1 reply; 19+ messages in thread
From: Jan Beulich @ 2015-04-13 15:52 UTC (permalink / raw)
To: Andrew Cooper, ian.campbell, wei.liu2, ian.jackson,
stefano.stabellini, Boris Ostrovsky, dgdegra, keir
Cc: elena.ufimtseva, dario.faggioli, xen-devel
>>> On 07.04.15 at 18:57, <boris.ostrovsky@oracle.com> wrote:
> On 04/07/2015 12:04 PM, Andrew Cooper wrote:
>> On 06/04/15 23:12, Boris Ostrovsky wrote:
>>> A number of changes to XEN_SYSCTL_numainfo interface:
>>>
>>> * Make sysctl NUMA topology query use fewer copies by combining some
>>> fields into a single structure and copying distances for each node
>>> in a single copy.
>>> * NULL meminfo and distance handles are a request for maximum number
>>> of nodes (num_nodes). If those handles are valid and num_nodes is
>>> is smaller than the number of nodes in the system then -ENOBUFS is
>>> returned (and correct num_nodes is provided)
>>> * Instead of using max_node_index for passing number of nodes keep this
>>> value in num_nodes: almost all uses of max_node_index required adding
>>> or subtracting one to eventually get to number of nodes anyway.
>>> * Replace INVALID_NUMAINFO_ID with XEN_INVALID_MEM_SZ and add
>>> XEN_INVALID_NODE_DIST.
>>>
>>> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
>>> Acked-by: Ian Campbell <ian.campbell@citrix.com>
>> This subtly changes the behaviour of XEN_SYSCTL_numainfo with regards to
>> NULL guest handles.
>>
>> Previously, a caller was able to select which information they wanted by
>> choosing which guest handles were non-NULL.
>>
>> With the new semantics, the caller must pass both ni->meminfo and
>> ni->distance to get either bit of information. Each
>> copy_to_guest_offset() should be gated on a !guest_handle_is_null() so a
>> caller can request meminfo information without distance information.
>
>
> Currently the caller, in fact, can have either of three pointers
> (node_to_memsize, node_to_memfree or node_to_node_distance) as NULL and
> the hypervisor will fill whichever pointer is valid. Because I put the
> first two together into a struct we are already changing behavior in
> that regard. Not to mention that having all three as NULL now has new
> meaning as well.
>
> I thought that either both pointers should be valid or neither. If
> people disagree I can change this.
I agree with Andrew's view, fwiw.
Jan
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v6 1/5] sysctl: Make XEN_SYSCTL_numainfo a little more efficient
2015-04-13 15:52 ` Jan Beulich
@ 2015-04-15 12:29 ` Ian Campbell
0 siblings, 0 replies; 19+ messages in thread
From: Ian Campbell @ 2015-04-15 12:29 UTC (permalink / raw)
To: Jan Beulich
Cc: elena.ufimtseva, wei.liu2, stefano.stabellini, Andrew Cooper,
dario.faggioli, ian.jackson, xen-devel, keir, dgdegra,
Boris Ostrovsky
On Mon, 2015-04-13 at 16:52 +0100, Jan Beulich wrote:
> >>> On 07.04.15 at 18:57, <boris.ostrovsky@oracle.com> wrote:
> > On 04/07/2015 12:04 PM, Andrew Cooper wrote:
> >> On 06/04/15 23:12, Boris Ostrovsky wrote:
> >>> A number of changes to XEN_SYSCTL_numainfo interface:
> >>>
> >>> * Make sysctl NUMA topology query use fewer copies by combining some
> >>> fields into a single structure and copying distances for each node
> >>> in a single copy.
> >>> * NULL meminfo and distance handles are a request for maximum number
> >>> of nodes (num_nodes). If those handles are valid and num_nodes is
> >>> is smaller than the number of nodes in the system then -ENOBUFS is
> >>> returned (and correct num_nodes is provided)
> >>> * Instead of using max_node_index for passing number of nodes keep this
> >>> value in num_nodes: almost all uses of max_node_index required adding
> >>> or subtracting one to eventually get to number of nodes anyway.
> >>> * Replace INVALID_NUMAINFO_ID with XEN_INVALID_MEM_SZ and add
> >>> XEN_INVALID_NODE_DIST.
> >>>
> >>> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
> >>> Acked-by: Ian Campbell <ian.campbell@citrix.com>
> >> This subtly changes the behaviour of XEN_SYSCTL_numainfo with regards to
> >> NULL guest handles.
> >>
> >> Previously, a caller was able to select which information they wanted by
> >> choosing which guest handles were non-NULL.
> >>
> >> With the new semantics, the caller must pass both ni->meminfo and
> >> ni->distance to get either bit of information. Each
> >> copy_to_guest_offset() should be gated on a !guest_handle_is_null() so a
> >> caller can request meminfo information without distance information.
> >
> >
> > Currently the caller, in fact, can have either of three pointers
> > (node_to_memsize, node_to_memfree or node_to_node_distance) as NULL and
> > the hypervisor will fill whichever pointer is valid. Because I put the
> > first two together into a struct we are already changing behavior in
> > that regard. Not to mention that having all three as NULL now has new
> > meaning as well.
> >
> > I thought that either both pointers should be valid or neither. If
> > people disagree I can change this.
>
> I agree with Andrew's view, fwiw.
So do I, although I wouldn't revoke my ack (which I would normally have
intended to make conditional on the h/v guys being happy, but it seems I
didn't remember on v5).
Ian
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v6 3/5] libxl/libxc: Move libxl_get_cpu_topology()'s hypercall buffer management to libxc
2015-04-06 22:12 ` [PATCH v6 3/5] libxl/libxc: Move libxl_get_cpu_topology()'s hypercall buffer management to libxc Boris Ostrovsky
@ 2015-04-15 12:31 ` Ian Campbell
0 siblings, 0 replies; 19+ messages in thread
From: Ian Campbell @ 2015-04-15 12:31 UTC (permalink / raw)
To: Boris Ostrovsky
Cc: elena.ufimtseva, wei.liu2, stefano.stabellini, andrew.cooper3,
dario.faggioli, ian.jackson, xen-devel, jbeulich, keir, dgdegra
On Mon, 2015-04-06 at 18:12 -0400, Boris Ostrovsky wrote:
> xc_cputopoinfo() is not expected to be used on a hot path and therefore
> hypercall buffer management can be pushed into libxc. This will simplify
> life for callers.
>
> Also update error reporting macros.
>
> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v6 4/5] libxl/libxc: Move libxl_get_numainfo()'s hypercall buffer management to libxc
2015-04-06 22:12 ` [PATCH v6 4/5] libxl/libxc: Move libxl_get_numainfo()'s " Boris Ostrovsky
@ 2015-04-15 12:33 ` Ian Campbell
0 siblings, 0 replies; 19+ messages in thread
From: Ian Campbell @ 2015-04-15 12:33 UTC (permalink / raw)
To: Boris Ostrovsky
Cc: elena.ufimtseva, wei.liu2, stefano.stabellini, andrew.cooper3,
dario.faggioli, ian.jackson, xen-devel, jbeulich, keir, dgdegra
On Mon, 2015-04-06 at 18:12 -0400, Boris Ostrovsky wrote:
> xc_numainfo() is not expected to be used on a hot path and therefore
> hypercall buffer management can be pushed into libxc. This will simplify
> life for callers.
>
> Also update error logging macros.
>
> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
> ---
>
> Changes in v6:
> * Dropped separate NULL buffer tests in xc_numainfo()
> * Moved test for buffers validity (either both or neither are NULL) to be the
> the first thing to do in xc_numainfo()
I suppose this last bit will be impacted by the discussion on #1? In any
case as long as this check ends up matching the hypercall semantics, as
to be agreed with the hypervisor maintainers, then you may add my:
Acked-by: Ian Campbell <ian.campbell@citrix.com>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v6 5/5] libxl: Add interface for querying hypervisor about PCI topology
2015-04-06 22:12 ` [PATCH v6 5/5] libxl: Add interface for querying hypervisor about PCI topology Boris Ostrovsky
@ 2015-04-15 12:35 ` Ian Campbell
0 siblings, 0 replies; 19+ messages in thread
From: Ian Campbell @ 2015-04-15 12:35 UTC (permalink / raw)
To: Boris Ostrovsky
Cc: elena.ufimtseva, wei.liu2, stefano.stabellini, andrew.cooper3,
dario.faggioli, ian.jackson, xen-devel, jbeulich, keir, dgdegra
On Mon, 2015-04-06 at 18:12 -0400, Boris Ostrovsky wrote:
> .. and use this new interface to display it along with CPU topology
> and NUMA information when 'xl info -n' command is issued
>
> The output will look like
> ...
> cpu_topology :
> cpu: core socket node
> 0: 0 0 0
> ...
> device topology :
> device node
> 0000:00:00.0 0
> 0000:00:01.0 0
> ...
>
> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
> ---
>
> Changes in v6:
> * xc_pcitopoinfo() now has to deal with hypercall not finishing processing whole
> array (due to changes in patch 2): do_sysctl() is now called in a loop).
Having looked at that function you can put my ack from before back,
thanks.
Ian.
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2015-04-15 12:35 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-04-06 22:12 [PATCH v6 0/5] Display IO topology when PXM data is available (plus some cleanup) Boris Ostrovsky
2015-04-06 22:12 ` [PATCH v6 1/5] sysctl: Make XEN_SYSCTL_numainfo a little more efficient Boris Ostrovsky
2015-04-07 16:04 ` Andrew Cooper
2015-04-07 16:57 ` Boris Ostrovsky
2015-04-07 17:04 ` Andrew Cooper
2015-04-07 17:28 ` Boris Ostrovsky
2015-04-08 16:31 ` Andrew Cooper
2015-04-13 15:52 ` Jan Beulich
2015-04-15 12:29 ` Ian Campbell
2015-04-06 22:12 ` [PATCH v6 2/5] sysctl: Add sysctl interface for querying PCI topology Boris Ostrovsky
2015-04-07 16:09 ` Andrew Cooper
2015-04-07 17:05 ` Boris Ostrovsky
2015-04-07 17:22 ` Daniel De Graaf
2015-04-06 22:12 ` [PATCH v6 3/5] libxl/libxc: Move libxl_get_cpu_topology()'s hypercall buffer management to libxc Boris Ostrovsky
2015-04-15 12:31 ` Ian Campbell
2015-04-06 22:12 ` [PATCH v6 4/5] libxl/libxc: Move libxl_get_numainfo()'s " Boris Ostrovsky
2015-04-15 12:33 ` Ian Campbell
2015-04-06 22:12 ` [PATCH v6 5/5] libxl: Add interface for querying hypervisor about PCI topology Boris Ostrovsky
2015-04-15 12:35 ` Ian Campbell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.