From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932449AbbDHQBu (ORCPT ); Wed, 8 Apr 2015 12:01:50 -0400 Received: from opensource.wolfsonmicro.com ([80.75.67.52]:36452 "EHLO opensource.wolfsonmicro.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932233AbbDHQBo (ORCPT ); Wed, 8 Apr 2015 12:01:44 -0400 From: Charles Keepax To: lee.jones@linaro.org Cc: sameo@linux.intel.com, broonie@kernel.org, lgirdwood@gmail.com, patches@opensource.wolfsonmicro.com, linux-kernel@vger.kernel.org Subject: [PATCH 0/9] wm5110 Boot Fixups Date: Wed, 8 Apr 2015 16:56:09 +0100 Message-Id: <1428508578-21022-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> X-Mailer: git-send-email 1.7.2.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Ok so I have completed the rework to the second of the two patch chains on this and pulled them back together into one series. Note the main difference is I have pulled a couple patches from the second series to the start of the chain. This is because of patch 3 which is a bug fix for 5102 I have discovered whilst working through this better system suspend support stuff. Thanks, Charles Charles Keepax (9): mfd: arizona: Use devres to manage reset GPIO mfd: arizona: Factor out hard reset into helper functions mfd: wm5102: Ensure we always boot the device fully mfd: arizona: Factor out SYSCLK enable from wm5102 hardware patch mfd: wm5110: Add register patch required for low power sleep regulator: arizona-ldo1: Add additional supported voltage mfd: wm5110: Set DCVDD voltage to 1.175V before entering sleep mode mfd: arizona: Add better support for system suspend mfd: wm5110: Add delay before releasing reset line drivers/mfd/arizona-core.c | 338 ++++++++++++++++++++++++++++++++------ drivers/regulator/arizona-ldo1.c | 15 ++ include/linux/mfd/arizona/core.h | 1 + 3 files changed, 302 insertions(+), 52 deletions(-) -- 1.7.2.5