From: Narsimhulu Musini <nmusini@cisco.com>
To: JBottomley@Parallels.com, linux-scsi@vger.kernel.org,
hare@suse.de, hch@infradead.org
Cc: Narsimhulu Musini <nmusini@cisco.com>,
Sesidhar Baddela <sebaddel@cisco.com>
Subject: [PATCH v4 9/9] snic:Add Makefile, patch Kconfig, MAINTAINERS
Date: Thu, 9 Apr 2015 04:49:49 -0700 [thread overview]
Message-ID: <1428580189-22785-10-git-send-email-nmusini@cisco.com> (raw)
In-Reply-To: <1428580189-22785-1-git-send-email-nmusini@cisco.com>
Kconfig for kbuild
Makefile to build snic module
Updated MAINTAINERS file
Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
---
* v3
- Added additional config section (CONFIG_SNIC_DEBUG_FS) for enabling debugging
functionality.
* v2
- Added compile time flags for debugfs dependent functionality.
MAINTAINERS | 7 +++++++
drivers/scsi/Kconfig | 17 +++++++++++++++++
drivers/scsi/Makefile | 1 +
drivers/scsi/snic/Makefile | 21 +++++++++++++++++++++
4 files changed, 46 insertions(+)
create mode 100644 drivers/scsi/snic/Makefile
diff --git a/MAINTAINERS b/MAINTAINERS
index 2a97e05..368fb76 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2536,6 +2536,13 @@ L: linux-scsi@vger.kernel.org
S: Supported
F: drivers/scsi/fnic/
+CISCO SCSI HBA DRIVER
+M: Narsimhulu Musini <nmusini@cisco.com>
+M: Sesidhar Baddela <sebaddel@cisco.com>
+L: linux-scsi@vger.kernel.org
+S: Supported
+F: drivers/scsi/snic/
+
CMPC ACPI DRIVER
M: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
M: Daniel Oliveira Nascimento <don@syst.com.br>
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 9c92f41..a6d3901 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -634,6 +634,23 @@ config FCOE_FNIC
<file:Documentation/scsi/scsi.txt>.
The module will be called fnic.
+config SCSI_SNIC
+ tristate "Cisco SNIC Driver"
+ depends on PCI && SCSI && X86
+ help
+ This is support for the Cisco PCI-Express SCSI HBA.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.txt>.
+ The module will be called snic.
+
+config SCSI_SNIC_DEBUG_FS
+ bool "Cisco SNIC Driver Debugfs Support"
+ depends on SCSI_SNIC && DEBUG_FS
+ help
+ This enables to list debugging information from SNIC Driver
+ available via debugfs file system
+
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
depends on PCI && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 58158f1..f643942 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_LIBFC) += libfc/
obj-$(CONFIG_LIBFCOE) += fcoe/
obj-$(CONFIG_FCOE) += fcoe/
obj-$(CONFIG_FCOE_FNIC) += fnic/
+obj-$(CONFIG_SCSI_SNIC) += snic/
obj-$(CONFIG_SCSI_BNX2X_FCOE) += libfc/ fcoe/ bnx2fc/
obj-$(CONFIG_ISCSI_TCP) += libiscsi.o libiscsi_tcp.o iscsi_tcp.o
obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o
diff --git a/drivers/scsi/snic/Makefile b/drivers/scsi/snic/Makefile
new file mode 100644
index 0000000..572102a
--- /dev/null
+++ b/drivers/scsi/snic/Makefile
@@ -0,0 +1,21 @@
+obj-$(CONFIG_SCSI_SNIC) += snic.o
+
+snic-y := \
+ snic_attrs.o \
+ snic_main.o \
+ snic_res.o \
+ snic_isr.o \
+ snic_ctl.o \
+ snic_io.o \
+ snic_scsi.o \
+ snic_disc.o \
+ vnic_cq.o \
+ vnic_intr.o \
+ vnic_dev.o \
+ vnic_wq.o
+
+ifeq ($(CONFIG_SCSI_SNIC_DEBUG_FS), y)
+ccflags-y += -DSNIC_DEBUG_FS
+snic-y += snic_debugfs.o \
+ snic_trc.o
+endif
--
1.8.5.4
next prev parent reply other threads:[~2015-04-09 11:53 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-09 11:49 [PATCH v4 0/9] snic:initial submission of snic driver for Cisco SCSI HBA Narsimhulu Musini
2015-04-09 11:49 ` [PATCH v4 1/9] snic: snic module infrastructure Narsimhulu Musini
2015-04-09 12:40 ` Hannes Reinecke
2015-04-09 11:49 ` [PATCH v4 2/9] snic:Add interrupt, resource firmware interfaces Narsimhulu Musini
2015-04-09 12:46 ` Hannes Reinecke
2015-04-09 11:49 ` [PATCH v4 3/9] snic:Add meta request, handling of meta requests Narsimhulu Musini
2015-04-09 12:50 ` Hannes Reinecke
2015-04-09 11:49 ` [PATCH v4 4/9] snic:Add snic target discovery Narsimhulu Musini
2015-04-09 12:59 ` Hannes Reinecke
2015-04-13 5:25 ` Narsimhulu Musini (nmusini)
2015-04-13 14:29 ` Hannes Reinecke
2015-04-14 10:15 ` Narsimhulu Musini (nmusini)
2015-04-09 11:49 ` [PATCH v4 5/9] snic:add SCSI handling, AEN, and fwreset handling Narsimhulu Musini
2015-04-09 13:16 ` Hannes Reinecke
2015-04-13 5:37 ` Narsimhulu Musini (nmusini)
2015-04-09 11:49 ` [PATCH v4 6/9] snic:Add low level queuing interfaces Narsimhulu Musini
2015-04-09 13:23 ` Hannes Reinecke
2015-04-13 5:40 ` Narsimhulu Musini (nmusini)
2015-04-09 11:49 ` [PATCH v4 7/9] snic:Add sysfs entries to list stats and trace data Narsimhulu Musini
2015-04-09 13:23 ` Hannes Reinecke
2015-04-09 11:49 ` [PATCH v4 8/9] snic:Add event tracing to capture IO events Narsimhulu Musini
2015-04-09 13:24 ` Hannes Reinecke
2015-04-09 11:49 ` Narsimhulu Musini [this message]
2015-04-09 13:25 ` [PATCH v4 9/9] snic:Add Makefile, patch Kconfig, MAINTAINERS Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1428580189-22785-10-git-send-email-nmusini@cisco.com \
--to=nmusini@cisco.com \
--cc=JBottomley@Parallels.com \
--cc=hare@suse.de \
--cc=hch@infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=sebaddel@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.