All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexey Kodanev <alexey.kodanev@oracle.com>
To: ltp-list@lists.sourceforge.net
Cc: vasily.isaenko@oracle.com
Subject: [LTP] [PATCH] syscalls/fallocate04: add new fallocate() test
Date: Fri, 10 Apr 2015 16:32:05 +0300	[thread overview]
Message-ID: <1428672725-13538-1-git-send-email-alexey.kodanev@oracle.com> (raw)

This is a new functional test of fallocate() syscall with the focus on
FALLOC_FL_ZERO_RANGE (since Linux 3.14) and FALLOC_FL_COLLAPSE_RANGE
(since Linux 3.15) modes.

Steps of test-cases:
  * make a hole in the middle of the file with FALLOC_FL_PUNCH_HOLE;
  * fill the hole and adjacent space with FALLOC_FL_ZERO_RANGE;
  * remove a block from a file with FALLOC_FL_COLLAPSE_RANGE

Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
---
 runtest/syscalls                                  |    1 +
 testcases/kernel/syscalls/.gitignore              |    1 +
 testcases/kernel/syscalls/fallocate/fallocate04.c |  282 +++++++++++++++++++++
 3 files changed, 284 insertions(+), 0 deletions(-)
 create mode 100644 testcases/kernel/syscalls/fallocate/fallocate04.c

diff --git a/runtest/syscalls b/runtest/syscalls
index 7703825..126f46f 100644
--- a/runtest/syscalls
+++ b/runtest/syscalls
@@ -154,6 +154,7 @@ faccessat01 faccessat01
 fallocate01 fallocate01
 fallocate02 fallocate02
 fallocate03 fallocate03
+fallocate04 fallocate04
 
 #posix_fadvise test cases
 posix_fadvise01                      posix_fadvise01
diff --git a/testcases/kernel/syscalls/.gitignore b/testcases/kernel/syscalls/.gitignore
index f10e85e..afe7f3b 100644
--- a/testcases/kernel/syscalls/.gitignore
+++ b/testcases/kernel/syscalls/.gitignore
@@ -135,6 +135,7 @@
 /fallocate/fallocate01
 /fallocate/fallocate02
 /fallocate/fallocate03
+/fallocate/fallocate04
 /fchdir/fchdir01
 /fchdir/fchdir02
 /fchdir/fchdir03
diff --git a/testcases/kernel/syscalls/fallocate/fallocate04.c b/testcases/kernel/syscalls/fallocate/fallocate04.c
new file mode 100644
index 0000000..ccad3f2
--- /dev/null
+++ b/testcases/kernel/syscalls/fallocate/fallocate04.c
@@ -0,0 +1,282 @@
+/*
+ * Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it would be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.
+ *
+ * Author: Alexey Kodanev <alexey.kodanev@oracle.com>
+ */
+
+#define _GNU_SOURCE
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+#include "test.h"
+#include "safe_macros.h"
+
+#define SEEK_HOLE			4
+#define FALLOC_FL_KEEP_SIZE		0x01
+#define FALLOC_FL_PUNCH_HOLE		0x02
+#define FALLOC_FL_COLLAPSE_RANGE	0x08
+#define FALLOC_FL_ZERO_RANGE		0x10
+
+char *TCID = "fallocate04";
+int TST_TOTAL = 3;
+
+static int fd;
+static const char fname[] = "fallocate04.txt";
+static size_t block_size;
+static size_t buf_size;
+enum { NUM_OF_BLOCKS = 3 };
+static int verbose;
+static const option_t options[] = {
+	{"v", &verbose, NULL},
+	{NULL, NULL, NULL}
+};
+
+static void help(void)
+{
+	printf("  -v      Verbose\n");
+}
+
+static void cleanup(void)
+{
+	close(fd);
+	tst_rmdir();
+}
+
+static void get_blocksize(void)
+{
+	struct stat file_stat;
+
+	if (fstat(fd, &file_stat) == -1)
+		tst_brkm(TFAIL | TERRNO, cleanup, "fstat() failed");
+
+	block_size = file_stat.st_blksize;
+	buf_size = NUM_OF_BLOCKS * block_size;
+}
+
+static size_t get_allocsize(void)
+{
+	struct stat file_stat;
+
+	if (fstat(fd, &file_stat) == -1)
+		tst_brkm(TFAIL | TERRNO, cleanup, "fstat() failed");
+
+	return file_stat.st_blocks * 512;
+}
+
+static void fill_tst_buf(char buf[])
+{
+	/* fill the buffer with a, b, c, ... letters on each block */
+	int i;
+
+	for (i = 0; i < NUM_OF_BLOCKS; ++i)
+		memset(buf + i * block_size, 'a' + i, block_size);
+}
+
+static void setup(void)
+{
+	tst_tmpdir();
+
+	fd = open(fname, O_RDWR | O_CREAT, 0700);
+	if (fd == -1)
+		tst_brkm(TBROK | TERRNO, NULL, "open(%s) failed", fname);
+
+	get_blocksize();
+
+	if (fallocate(fd, 0, 0, buf_size) == -1) {
+		if (errno == ENOSYS)
+			tst_brkm(TCONF, cleanup, "fallocate() not supported");
+		tst_brkm(TFAIL | TERRNO, cleanup, "fallocate() failed");
+	}
+
+	char buf[buf_size];
+
+	fill_tst_buf(buf);
+
+	if (write(fd, buf, buf_size) != (ssize_t)buf_size)
+		tst_brkm(TFAIL | TERRNO, cleanup, "can't fill the file");
+}
+
+static void check_file_data(const char exp_buf[])
+{
+	size_t size = sizeof(exp_buf);
+	char rbuf[size];
+
+	tst_resm(TINFO, "reading the file, compare with expected buffer");
+
+	if (lseek(fd, 0, SEEK_SET) != 0)
+		tst_brkm(TFAIL | TERRNO, cleanup, "lseek() failed");
+	if (read(fd, rbuf, size) != (ssize_t)size)
+		tst_brkm(TFAIL | TERRNO, cleanup, "can't read file");
+
+	if (memcmp(exp_buf, rbuf, size)) {
+		if (verbose) {
+			tst_resm_hexd(TINFO, exp_buf, size, "expected:");
+			tst_resm_hexd(TINFO, rbuf, size, "but read:");
+		}
+		tst_brkm(TFAIL, cleanup, "not expected file data");
+	}
+}
+
+static void test01(void)
+{
+	size_t alloc_size0 = get_allocsize();
+
+	tst_resm(TINFO, "read allocated file size '%zu'", alloc_size0);
+	tst_resm(TINFO, "make a hole with FALLOC_FL_PUNCH_HOLE");
+
+	if (fallocate(fd, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
+	    block_size, block_size) == -1) {
+		if (errno == EOPNOTSUPP)
+			tst_brkm(TCONF, cleanup, "operation not supported");
+		tst_brkm(TFAIL | TERRNO, cleanup, "fallocate() failed");
+	}
+
+	tst_resm(TINFO, "check that file has a hole with lseek(,,SEEK_HOLE)");
+	ssize_t ret = lseek(fd, 0, SEEK_HOLE);
+
+	if (ret != (ssize_t)block_size) {
+		/* exclude error when kernel doesn't have SEEK_HOLE support */
+		if (errno != EINVAL) {
+			tst_brkm(TFAIL | TERRNO, cleanup,
+				 "fallocate() or lseek() failed");
+		} else {
+			tst_resm(TWARN | TERRNO, "lseek() failed");
+		}
+	}
+	tst_resm(TINFO, "found a hole at '%d' offset", ret);
+
+	size_t alloc_size1 = get_allocsize();
+
+	tst_resm(TINFO, "allocated file size before '%zu' and after '%zu'",
+		alloc_size0, alloc_size1);
+	if ((alloc_size0 - block_size) != alloc_size1)
+		tst_brkm(TFAIL, cleanup, "not expected allocated size");
+
+	char exp_buf[buf_size];
+
+	fill_tst_buf(exp_buf);
+	memset(exp_buf + block_size, 0, block_size);
+
+	check_file_data(exp_buf);
+
+	tst_resm(TPASS, "test succeeded");
+}
+
+static void test02(void)
+{
+	tst_resm(TINFO, "zeroing file space with FALLOC_FL_ZERO_RANGE");
+
+	if (tst_kvercmp(3, 14, 0) < 0) {
+		tst_brkm(TCONF, NULL,
+			 "Test must be run with kernel 3.14 or newer");
+	}
+
+	size_t alloc_size0 = get_allocsize();
+
+	tst_resm(TINFO, "read current allocated file size '%zu'", alloc_size0);
+
+	if (fallocate(fd, FALLOC_FL_ZERO_RANGE, block_size - 1,
+		block_size + 2) == -1) {
+		if (errno == EOPNOTSUPP)
+			tst_brkm(TCONF, cleanup, "operation not supported");
+		tst_brkm(TFAIL | TERRNO, cleanup, "fallocate failed");
+	}
+
+	/* The file hole in the specified range must be allocated and
+	 * filled with zeros. Check it.
+	 */
+	size_t alloc_size1 = get_allocsize();
+
+	tst_resm(TINFO, "allocated file size before '%zu' and after '%zu'",
+		alloc_size0, alloc_size1);
+	if ((alloc_size0 + block_size) != alloc_size1)
+		tst_brkm(TFAIL, cleanup, "not expected allocated size");
+
+	char exp_buf[buf_size];
+
+	fill_tst_buf(exp_buf);
+	memset(exp_buf + block_size - 1, 0, block_size + 2);
+
+	check_file_data(exp_buf);
+
+	tst_resm(TPASS, "test succeeded");
+}
+
+static void test03(void)
+{
+	tst_resm(TINFO, "collapsing file space with FALLOC_FL_COLLAPSE_RANGE");
+
+	if (tst_kvercmp(3, 15, 0) < 0) {
+		tst_brkm(TCONF, NULL,
+			 "Test must be run with kernel 3.15 or newer");
+	}
+
+	size_t alloc_size0 = get_allocsize();
+
+	tst_resm(TINFO, "read current allocated file size '%zu'", alloc_size0);
+
+	if (fallocate(fd, FALLOC_FL_COLLAPSE_RANGE, block_size,
+		block_size) == -1) {
+		if (errno == EOPNOTSUPP)
+			tst_brkm(TCONF, cleanup, "operation not supported");
+		tst_brkm(TFAIL | TERRNO, cleanup, "fallocate failed");
+	}
+
+	size_t alloc_size1 = get_allocsize();
+
+	tst_resm(TINFO, "allocated file size before '%zu' and after '%zu'",
+		alloc_size0, alloc_size1);
+	if ((alloc_size0 - block_size) != alloc_size1)
+		tst_brkm(TFAIL, cleanup, "not expected allocated size");
+
+	size_t size = buf_size - block_size;
+	char tmp_buf[buf_size];
+	char exp_buf[size];
+
+	fill_tst_buf(tmp_buf);
+
+	memcpy(exp_buf, tmp_buf, block_size);
+	memcpy(exp_buf + block_size, tmp_buf + size, block_size);
+
+	check_file_data(exp_buf);
+
+	tst_resm(TPASS, "test succeeded");
+}
+
+int main(int argc, char *argv[])
+{
+	int lc;
+
+	tst_parse_opts(argc, argv, options, help);
+
+	for (lc = 0; TEST_LOOPING(lc); ++lc) {
+
+		setup();
+
+		test01();
+		test02();
+		test03();
+
+		cleanup();
+	}
+
+	tst_exit();
+}
-- 
1.7.1


------------------------------------------------------------------------------
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list

             reply	other threads:[~2015-04-10 13:29 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-10 13:32 Alexey Kodanev [this message]
2015-04-13  2:33 ` [LTP] [PATCH] syscalls/fallocate04: add new fallocate() test Xiaoguang Wang
2015-04-13 13:42   ` Alexey Kodanev
2015-04-13 14:16     ` Alexey Kodanev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1428672725-13538-1-git-send-email-alexey.kodanev@oracle.com \
    --to=alexey.kodanev@oracle.com \
    --cc=ltp-list@lists.sourceforge.net \
    --cc=vasily.isaenko@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.