[PATCH 1/2] ixgbe: silence noisy log messages

[Stephen Hemminger <stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>]

The ixgbe driver likes to be far to chatty in the system log
which is good for the original developer but not good for a production
product.

Reduce the log spam by doing:
 * All the normal messages should be changed from INFO to DEBUG.
 * The log messages should be done with RTE_LOG so that they can be
   compiled out if RTE_LOG_LEVEL is set.
 * The link state print routine prints more than is necessary
   PCI information is already known (earlier in log) and has
   no purpose here.

Signed-off-by: Stephen Hemminger <stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
---
 lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 41 ++++++++++++++++---------------------
 lib/librte_pmd_ixgbe/ixgbe_fdir.c   |  2 +-
 lib/librte_pmd_ixgbe/ixgbe_logs.h   |  3 +--
 lib/librte_pmd_ixgbe/ixgbe_rxtx.c   | 14 ++++++-------
 4 files changed, 27 insertions(+), 33 deletions(-)

diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index 5caee22..adc0fb9 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -569,8 +569,8 @@ ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev *eth_dev,
 		(hw->mac.type != ixgbe_mac_X550EM_x))
 		return -ENOSYS;
 
-	PMD_INIT_LOG(INFO, "Setting port %d, %s queue_id %d to stat index %d",
-		     (int)(eth_dev->data->port_id), is_rx ? "RX" : "TX",
+	PMD_INIT_LOG(DEBUG, "Setting port %u, %s queue_id %d to stat index %d",
+		     eth_dev->data->port_id, is_rx ? "RX" : "TX",
 		     queue_id, stat_idx);
 
 	n = (uint8_t)(queue_id / NB_QMAP_FIELDS_PER_QSM_REG);
@@ -595,20 +595,20 @@ ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev *eth_dev,
 	else
 		stat_mappings->rqsmr[n] |= qsmr_mask;
 
-	PMD_INIT_LOG(INFO, "Set port %d, %s queue_id %d to stat index %d",
-		     (int)(eth_dev->data->port_id), is_rx ? "RX" : "TX",
+	PMD_INIT_LOG(DEBUG, "Set port %u, %s queue_id %d to stat index %d",
+		     eth_dev->data->port_id, is_rx ? "RX" : "TX",
 		     queue_id, stat_idx);
-	PMD_INIT_LOG(INFO, "%s[%d] = 0x%08x", is_rx ? "RQSMR" : "TQSM", n,
+	PMD_INIT_LOG(DEBUG, "%s[%d] = 0x%08x", is_rx ? "RQSMR" : "TQSM", n,
 		     is_rx ? stat_mappings->rqsmr[n] : stat_mappings->tqsm[n]);
 
 	/* Now write the mapping in the appropriate register */
 	if (is_rx) {
-		PMD_INIT_LOG(INFO, "Write 0x%x to RX IXGBE stat mapping reg:%d",
+		PMD_INIT_LOG(DEBUG, "Write 0x%x to RX IXGBE stat mapping reg:%d",
 			     stat_mappings->rqsmr[n], n);
 		IXGBE_WRITE_REG(hw, IXGBE_RQSMR(n), stat_mappings->rqsmr[n]);
 	}
 	else {
-		PMD_INIT_LOG(INFO, "Write 0x%x to TX IXGBE stat mapping reg:%d",
+		PMD_INIT_LOG(DEBUG, "Write 0x%x to TX IXGBE stat mapping reg:%d",
 			     stat_mappings->tqsm[n], n);
 		IXGBE_WRITE_REG(hw, IXGBE_TQSM(n), stat_mappings->tqsm[n]);
 	}
@@ -752,7 +752,7 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev)
 			ixgbe_set_tx_function(eth_dev, txq);
 		} else {
 			/* Use default TX function if we get here */
-			PMD_INIT_LOG(INFO, "No TX queues configured yet. "
+			PMD_INIT_LOG(DEBUG, "No TX queues configured yet. "
 			                   "Using default TX function.");
 		}
 
@@ -1249,7 +1249,7 @@ ixgbe_vlan_hw_strip_disable(struct rte_eth_dev *dev, uint16_t queue)
 
 	if (hw->mac.type == ixgbe_mac_82598EB) {
 		/* No queue level support */
-		PMD_INIT_LOG(INFO, "82598EB not support queue level hw strip");
+		PMD_INIT_LOG(NOTICE, "82598EB not support queue level hw strip");
 		return;
 	}
 	else {
@@ -1273,7 +1273,7 @@ ixgbe_vlan_hw_strip_enable(struct rte_eth_dev *dev, uint16_t queue)
 
 	if (hw->mac.type == ixgbe_mac_82598EB) {
 		/* No queue level supported */
-		PMD_INIT_LOG(INFO, "82598EB not support queue level hw strip");
+		PMD_INIT_LOG(NOTICE, "82598EB not support queue level hw strip");
 		return;
 	}
 	else {
@@ -2265,7 +2265,7 @@ ixgbe_dev_interrupt_get_status(struct rte_eth_dev *dev)
 
 	/* read-on-clear nic registers here */
 	eicr = IXGBE_READ_REG(hw, IXGBE_EICR);
-	PMD_DRV_LOG(INFO, "eicr %x", eicr);
+	PMD_DRV_LOG(DEBUG, "eicr %x", eicr);
 
 	intr->flags = 0;
 	if (eicr & IXGBE_EICR_LSC) {
@@ -2297,20 +2297,15 @@ ixgbe_dev_link_status_print(struct rte_eth_dev *dev)
 	memset(&link, 0, sizeof(link));
 	rte_ixgbe_dev_atomic_read_link_status(dev, &link);
 	if (link.link_status) {
-		PMD_INIT_LOG(INFO, "Port %d: Link Up - speed %u Mbps - %s",
-					(int)(dev->data->port_id),
+		PMD_INIT_LOG(DEBUG, "Port %u: Link Up - speed %u Mbps - %s",
+					dev->data->port_id,
 					(unsigned)link.link_speed,
 			link.link_duplex == ETH_LINK_FULL_DUPLEX ?
 					"full-duplex" : "half-duplex");
 	} else {
-		PMD_INIT_LOG(INFO, " Port %d: Link Down",
-				(int)(dev->data->port_id));
-	}
-	PMD_INIT_LOG(INFO, "PCI Address: %04d:%02d:%02d:%d",
-				dev->pci_dev->addr.domain,
-				dev->pci_dev->addr.bus,
-				dev->pci_dev->addr.devid,
-				dev->pci_dev->addr.function);
+		PMD_INIT_LOG(DEBUG, "Port %d: Link Down",
+				dev->data->port_id);
+	}
 }
 
 /*
@@ -2947,12 +2942,12 @@ ixgbevf_dev_configure(struct rte_eth_dev *dev)
 	 */
 #ifndef RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC
 	if (!conf->rxmode.hw_strip_crc) {
-		PMD_INIT_LOG(INFO, "VF can't disable HW CRC Strip");
+		PMD_INIT_LOG(NOTICE, "VF can't disable HW CRC Strip");
 		conf->rxmode.hw_strip_crc = 1;
 	}
 #else
 	if (conf->rxmode.hw_strip_crc) {
-		PMD_INIT_LOG(INFO, "VF can't enable HW CRC Strip");
+		PMD_INIT_LOG(NOTICE, "VF can't enable HW CRC Strip");
 		conf->rxmode.hw_strip_crc = 0;
 	}
 #endif
diff --git a/lib/librte_pmd_ixgbe/ixgbe_fdir.c b/lib/librte_pmd_ixgbe/ixgbe_fdir.c
index afc53cb..df6aaee 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_fdir.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_fdir.c
@@ -384,7 +384,7 @@ ixgbe_set_fdir_flex_conf(struct rte_eth_dev *dev,
 	fdirm = IXGBE_READ_REG(hw, IXGBE_FDIRM);
 
 	if (conf == NULL) {
-		PMD_DRV_LOG(INFO, "NULL pointer.");
+		PMD_DRV_LOG(ERR, "NULL pointer.");
 		return -EINVAL;
 	}
 
diff --git a/lib/librte_pmd_ixgbe/ixgbe_logs.h b/lib/librte_pmd_ixgbe/ixgbe_logs.h
index 572e030..53ba42d 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_logs.h
+++ b/lib/librte_pmd_ixgbe/ixgbe_logs.h
@@ -35,8 +35,7 @@
 #define _IXGBE_LOGS_H_
 
 #define PMD_INIT_LOG(level, fmt, args...) \
-	rte_log(RTE_LOG_ ## level, RTE_LOGTYPE_PMD, \
-		"PMD: %s(): " fmt "\n", __func__, ##args)
+	RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ##args)
 
 #ifdef RTE_LIBRTE_IXGBE_DEBUG_INIT
 #define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
index 9da2c7e..34e3b9a 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -1781,23 +1781,23 @@ ixgbe_set_tx_function(struct rte_eth_dev *dev, struct ixgbe_tx_queue *txq)
 	/* Use a simple Tx queue (no offloads, no multi segs) if possible */
 	if (((txq->txq_flags & IXGBE_SIMPLE_FLAGS) == IXGBE_SIMPLE_FLAGS)
 			&& (txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) {
-		PMD_INIT_LOG(INFO, "Using simple tx code path");
+		PMD_INIT_LOG(DEBUG, "Using simple tx code path");
 #ifdef RTE_IXGBE_INC_VECTOR
 		if (txq->tx_rs_thresh <= RTE_IXGBE_TX_MAX_FREE_BUF_SZ &&
 				(rte_eal_process_type() != RTE_PROC_PRIMARY ||
 					ixgbe_txq_vec_setup(txq) == 0)) {
-			PMD_INIT_LOG(INFO, "Vector tx enabled.");
+			PMD_INIT_LOG(DEBUG, "Vector tx enabled.");
 			dev->tx_pkt_burst = ixgbe_xmit_pkts_vec;
 		} else
 #endif
 		dev->tx_pkt_burst = ixgbe_xmit_pkts_simple;
 	} else {
-		PMD_INIT_LOG(INFO, "Using full-featured tx code path");
-		PMD_INIT_LOG(INFO,
+		PMD_INIT_LOG(DEBUG, "Using full-featured tx code path");
+		PMD_INIT_LOG(DEBUG,
 				" - txq_flags = %lx " "[IXGBE_SIMPLE_FLAGS=%lx]",
 				(unsigned long)txq->txq_flags,
 				(unsigned long)IXGBE_SIMPLE_FLAGS);
-		PMD_INIT_LOG(INFO,
+		PMD_INIT_LOG(DEBUG,
 				" - tx_rs_thresh = %lu " "[RTE_PMD_IXGBE_TX_MAX_BURST=%lu]",
 				(unsigned long)txq->tx_rs_thresh,
 				(unsigned long)RTE_PMD_IXGBE_TX_MAX_BURST);
@@ -3549,8 +3549,8 @@ void ixgbe_set_rx_function(struct rte_eth_dev *dev)
 	 *    - Single buffer allocation (the simplest one)
 	 */
 	} else if (hw->rx_vec_allowed) {
-		PMD_INIT_LOG(INFO, "Vector rx enabled, please make sure RX "
-				   "burst size no less than 32.");
+		PMD_INIT_LOG(DEBUG, "Vector rx enabled, please make sure RX "
+				    "burst size no less than 32.");
 
 		dev->rx_pkt_burst = ixgbe_recv_pkts_vec;
 	} else if (hw->rx_bulk_alloc_allowed) {
-- 
2.1.4