[PATCH v2 09/19] video: sunxi: de2: switch to public uclass functions

["Jernej Škrabec" <jernej.skrabec@siol.net>]

Dne nedelja, 07. marec 2021 ob 02:32:52 CET je Andre Przywara napisal(a):
> On Sat,  6 Mar 2021 20:54:27 +0100
> 
> Jernej Skrabec <jernej.skrabec@siol.net> wrote:
> > Currently DE2 driver uses functions which are defined in internal
> > headers. They are not meant to be used outside of uclass framework.
> > Switch DE2 driver to public ones. This has additional benefit that
> > device_probe doesn't need to be called manually.
> 
> Indeed, good solution: for the calls in _probe(), we call de2_init()
> right afterwards, which would explicitly call probe for the display, so
> this both saves this call and the usage of the internal function.
> For the calls in simplefb_setup: the DM framework checks if a device
> has already been activated, so there is no problem with double probes.
> 
> However, actually testing this on a Pine64-LTS revealed that this breaks
> on the A64: I only get a black screen (bisecting down to this commit).
> 
> I didn't investigate any further yet, just wanted to give a heads up.

Thanks! I'll check what's going on.

Best regards,
Jernej

> 
> Cheers,
> Andre
> 
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> > ---
> > 
> >  drivers/video/sunxi/sunxi_de2.c | 29 ++++++++++-------------------
> >  1 file changed, 10 insertions(+), 19 deletions(-)
> > 
> > diff --git a/drivers/video/sunxi/sunxi_de2.c
> > b/drivers/video/sunxi/sunxi_de2.c index 6b836a011944..e02d359cd259 100644
> > --- a/drivers/video/sunxi/sunxi_de2.c
> > +++ b/drivers/video/sunxi/sunxi_de2.c
> > @@ -19,8 +19,6 @@
> > 
> >  #include <asm/io.h>
> >  #include <asm/arch/clock.h>
> >  #include <asm/arch/display2.h>
> > 
> > -#include <dm/device-internal.h>
> > -#include <dm/uclass-internal.h>
> > 
> >  #include <linux/bitops.h>
> >  #include "simplefb_common.h"
> > 
> > @@ -198,13 +196,6 @@ static int sunxi_de2_init(struct udevice *dev, ulong
> > fbbase,> 
> >  	disp_uc_plat->source_id = mux;
> > 
> > -	ret = device_probe(disp);
> > -	if (ret) {
> > -		debug("%s: device '%s' display won't probe (ret=%d)\n",
> > -		      __func__, dev->name, ret);
> > -		return ret;
> > -	}
> > -
> > 
> >  	ret = display_read_timing(disp, &timing);
> >  	if (ret) {
> >  	
> >  		debug("%s: Failed to read timings\n", __func__);
> > 
> > @@ -245,8 +236,8 @@ static int sunxi_de2_probe(struct udevice *dev)
> > 
> >  	if (!(gd->flags & GD_FLG_RELOC))
> >  	
> >  		return 0;
> > 
> > -	ret = uclass_find_device_by_name(UCLASS_DISPLAY,
> > -					 "sunxi_lcd", &disp);
> > +	ret = uclass_get_device_by_driver(UCLASS_DISPLAY,
> > +					  
DM_DRIVER_GET(sunxi_lcd), &disp);
> > 
> >  	if (!ret) {
> >  	
> >  		int mux;
> > 
> > @@ -262,8 +253,8 @@ static int sunxi_de2_probe(struct udevice *dev)
> > 
> >  	debug("%s: lcd display not found (ret=%d)\n", __func__, ret);
> > 
> > -	ret = uclass_find_device_by_name(UCLASS_DISPLAY,
> > -					 "sunxi_dw_hdmi", 
&disp);
> > +	ret = uclass_get_device_by_driver(UCLASS_DISPLAY,
> > +					  
DM_DRIVER_GET(sunxi_dw_hdmi), &disp);
> > 
> >  	if (!ret) {
> >  	
> >  		int mux;
> >  		if (IS_ENABLED(CONFIG_MACH_SUNXI_H3_H5))
> > 
> > @@ -332,8 +323,8 @@ int sunxi_simplefb_setup(void *blob)
> > 
> >  		mux = 1;
> >  	
> >  	/* Skip simplefb setting if DE2 / HDMI is not present */
> > 
> > -	ret = uclass_find_device_by_name(UCLASS_VIDEO,
> > -					 "sunxi_de2", &de2);
> > +	ret = uclass_get_device_by_driver(UCLASS_VIDEO,
> > +					  
DM_DRIVER_GET(sunxi_de2), &de2);
> > 
> >  	if (ret) {
> >  	
> >  		debug("DE2 not present\n");
> >  		return 0;
> > 
> > @@ -342,8 +333,8 @@ int sunxi_simplefb_setup(void *blob)
> > 
> >  		return 0;
> >  	
> >  	}
> > 
> > -	ret = uclass_find_device_by_name(UCLASS_DISPLAY,
> > -					 "sunxi_dw_hdmi", 
&hdmi);
> > +	ret = uclass_get_device_by_driver(UCLASS_DISPLAY,
> > +					  
DM_DRIVER_GET(sunxi_dw_hdmi), &hdmi);
> > 
> >  	if (ret) {
> >  	
> >  		debug("HDMI not present\n");
> >  	
> >  	} else if (device_active(hdmi)) {
> > 
> > @@ -355,8 +346,8 @@ int sunxi_simplefb_setup(void *blob)
> > 
> >  		debug("HDMI present but not probed\n");
> >  	
> >  	}
> > 
> > -	ret = uclass_find_device_by_name(UCLASS_DISPLAY,
> > -					 "sunxi_lcd", &lcd);
> > +	ret = uclass_get_device_by_driver(UCLASS_DISPLAY,
> > +					  
DM_DRIVER_GET(sunxi_lcd), &lcd);
> > 
> >  	if (ret)
> >  	
> >  		debug("LCD not present\n");
> >  	
> >  	else if (device_active(lcd))