All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 0/3] spi, sf: add mtdparts feature to spi and sf commands
Date: Mon, 20 Apr 2015 07:47:30 +0200	[thread overview]
Message-ID: <1429508853-10139-1-git-send-email-hs@denx.de> (raw)

This patchserie add the popssibility to define mtd partitions on
spi nor flash, and use this settings with the sf commands.

steps:

- add MTD layer driver for spi, original patch from:
http://git.denx.de/?p=u-boot/u-boot-mips.git;a=commitdiff;h=bb246819cdc90493dd7089eaa51b9e639765cced

  and addapted it to current mainline.

- move common functions to get offset and size from
  cmdline nand command to extract offset and size from
  a mtd partition to common place "drivers/mtd/mtd_uboot.c"
  maybe another place is better?

- add to the sf command the possibility to use offset and size from
  the settings in mtdparts

With this patchset, the sf command looks now:

=> sf
sf - SPI flash sub-system

Usage:
sf probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus
                                  and chip select
sf read addr offset|partition len       - read `len' bytes starting at
                                          `offset' to memory at `addr'
sf write addr offset|partition len      - write `len' bytes from memory
                                          at `addr' to flash at `offset'
sf erase offset|partition [+]len        - erase `len' bytes from `offset'
                                          `+len' round up `len' to block size
sf update addr offset|partition len     - erase and write `len' bytes from memory
                                          at `addr' to flash at `offset'
=>
for example "env" is defined in mtdparts:

=> sf read 13000000 env
device 0 offset 0xd0000, size 0x10000
SF: 65536 bytes @ 0xd0000 Read: OK
=>

There are the followings checkpatch warnings:

CHECK: Alignment should match open parenthesis
+               if (arg_off(argv[2], &idx, &addr, &maxsize, &maxsize,
+                   MTD_DEV_TYPE_NAND, nand_info[idx].size)) {

CHECK: Alignment should match open parenthesis
+                       if (arg_off(argv[3], &dev, &off, &size, &maxsize,
+                           MTD_DEV_TYPE_NAND, nand_info[dev].size))

CHECK: Alignment should match open parenthesis
+                       if (arg_off_size(argc - 3, argv + 3, &dev, &off, &size,
+                           &maxsize, MTD_DEV_TYPE_NAND,

total: 0 errors, 0 warnings, 3 checks, 361 lines checked

NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE NETWORKING_BLOCK_COMMENT_STYLE USLEEP_RANGE

20140714_ml_mtdparts/0002-mtd-nand-move-common-functions-from-cmd_nand.c-to-co.patch has style problems, please review.

I see not, why this warning pops up ...

resend rebased version of this series, as v3 is pending since
September 2014...

Changes in v2:
- add comment from Daniel Schwierzeck:
  fix compile error from original patch with
  "static inline" rather than "static __maybe_unused"
Series-changes: 3
- rebase with d6c1ffc7d23f4fe4ae8c91101861055b8e1501b6
Series-changes: 4
- rebased against 385a08a60f042061b004642d6b9bb6cfb794ad5a
Series-changes: 5
- no changes
- none
Series-changes: 3
- add comments from scott wood:
  - align MTD_DEV_TYPE_NAND correct
  - remove unnecessary inline
  - rework "jffs2 header" problem later
- rebase with d6c1ffc7d23f4fe4ae8c91101861055b8e1501b6
Series-changes: 4
- rebased against 385a08a60f042061b004642d6b9bb6cfb794ad5a
Series-changes: 5
- add comment from Scott Wood:
  keep the continuation line aligned with the arguments
- none
Series-changes: 3
- rebase with d6c1ffc7d23f4fe4ae8c91101861055b8e1501b6
Series-changes: 4
- rebased against 385a08a60f042061b004642d6b9bb6cfb794ad5a
Series-changes: 5
- no changes

Daniel Schwierzeck (1):
  mtd, spi: add MTD layer driver

Heiko Schocher (2):
  mtd, nand: move common functions from cmd_nand.c to common place
  spi, sf: use offset and size in sf cmd from mtdpartition

 README                        |   3 +
 common/cmd_nand.c             | 142 ++++++++----------------------------------
 common/cmd_onenand.c          |  19 ++----
 common/cmd_sf.c               |  57 +++++++++--------
 drivers/mtd/Makefile          |   4 +-
 drivers/mtd/mtd_uboot.c       | 114 +++++++++++++++++++++++++++++++++
 drivers/mtd/spi/Makefile      |   1 +
 drivers/mtd/spi/sf_internal.h |  13 ++++
 drivers/mtd/spi/sf_mtd.c      | 104 +++++++++++++++++++++++++++++++
 drivers/mtd/spi/sf_probe.c    |   5 ++
 include/linux/mtd/mtd.h       |   7 +++
 11 files changed, 312 insertions(+), 157 deletions(-)
 create mode 100644 drivers/mtd/mtd_uboot.c
 create mode 100644 drivers/mtd/spi/sf_mtd.c

-- 
2.1.0

             reply	other threads:[~2015-04-20  5:47 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-20  5:47 Heiko Schocher [this message]
2015-04-20  5:47 ` [U-Boot] [PATCH v5 1/3] mtd, spi: add MTD layer driver Heiko Schocher
2015-04-22 10:52   ` Jagan Teki
2015-04-23  5:27     ` Heiko Schocher
2015-04-20  5:47 ` [U-Boot] [PATCH v5 2/3] mtd, nand: move common functions from cmd_nand.c to common place Heiko Schocher
2015-04-22 10:53   ` Jagan Teki
2015-04-22 22:47   ` Scott Wood
2015-04-23  5:57     ` Heiko Schocher
2015-04-23  6:55       ` Scott Wood
2015-04-23 11:12         ` Heiko Schocher
2015-04-23 17:48           ` Scott Wood
2015-04-24  4:59             ` Heiko Schocher
2015-04-24  5:25               ` Scott Wood
2015-04-20  5:47 ` [U-Boot] [PATCH v5 3/3] spi, sf: use offset and size in sf cmd from mtdpartition Heiko Schocher
2015-04-22 10:58   ` Jagan Teki
2015-04-23  5:38     ` Heiko Schocher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1429508853-10139-1-git-send-email-hs@denx.de \
    --to=hs@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.