From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from ip4-83-240-67-251.cust.nbox.cz ([83.240.67.251]:51297 "EHLO ip4-83-240-18-248.cust.nbox.cz" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752882AbbEDMiI (ORCPT ); Mon, 4 May 2015 08:38:08 -0400 From: Jiri Slaby To: stable@vger.kernel.org Cc: James Bottomley , Jiri Slaby Subject: [patch added to the 3.12 stable tree] mvsas: fix panic on expander attached SATA devices Date: Mon, 4 May 2015 14:37:45 +0200 Message-Id: <1430743082-6957-54-git-send-email-jslaby@suse.cz> In-Reply-To: <1430743082-6957-1-git-send-email-jslaby@suse.cz> References: <1430743082-6957-1-git-send-email-jslaby@suse.cz> Sender: stable-owner@vger.kernel.org List-ID: From: James Bottomley This patch has been added to the 3.12 stable tree. If you have any objections, please let us know. =============== commit 56cbd0ccc1b508de19561211d7ab9e1c77e6b384 upstream. mvsas is giving a General protection fault when it encounters an expander attached ATA device. Analysis of mvs_task_prep_ata() shows that the driver is assuming all ATA devices are locally attached and obtaining the phy mask by indexing the local phy table (in the HBA structure) with the phy id. Since expanders have many more phys than the HBA, this is causing the index into the HBA phy table to overflow and returning rubbish as the pointer. mvs_task_prep_ssp() instead does the phy mask using the port properties. Mirror this in mvs_task_prep_ata() to fix the panic. Reported-by: Adam Talbot Tested-by: Adam Talbot Signed-off-by: James Bottomley Signed-off-by: Jiri Slaby --- drivers/scsi/mvsas/mv_sas.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c index 6b1b4e91e53f..1aa2a8cbb4df 100644 --- a/drivers/scsi/mvsas/mv_sas.c +++ b/drivers/scsi/mvsas/mv_sas.c @@ -441,14 +441,11 @@ static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag) static int mvs_task_prep_ata(struct mvs_info *mvi, struct mvs_task_exec_info *tei) { - struct sas_ha_struct *sha = mvi->sas; struct sas_task *task = tei->task; struct domain_device *dev = task->dev; struct mvs_device *mvi_dev = dev->lldd_dev; struct mvs_cmd_hdr *hdr = tei->hdr; struct asd_sas_port *sas_port = dev->port; - struct sas_phy *sphy = dev->phy; - struct asd_sas_phy *sas_phy = sha->sas_phy[sphy->number]; struct mvs_slot_info *slot; void *buf_prd; u32 tag = tei->tag, hdr_tag; @@ -468,7 +465,7 @@ static int mvs_task_prep_ata(struct mvs_info *mvi, slot->tx = mvi->tx_prod; del_q = TXQ_MODE_I | tag | (TXQ_CMD_STP << TXQ_CMD_SHIFT) | - (MVS_PHY_ID << TXQ_PHY_SHIFT) | + ((sas_port->phy_mask & TXQ_PHY_MASK) << TXQ_PHY_SHIFT) | (mvi_dev->taskfileset << TXQ_SRS_SHIFT); mvi->tx[mvi->tx_prod] = cpu_to_le32(del_q); -- 2.3.5