All of lore.kernel.org
 help / color / mirror / Atom feed
From: Helin Zhang <helin.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: dev-VfR2kkLFssw@public.gmane.org
Subject: [PATCH RFC 4/6] ethdev: add QinQ offload capability flags
Date: Tue,  5 May 2015 10:32:21 +0800	[thread overview]
Message-ID: <1430793143-3610-5-git-send-email-helin.zhang@intel.com> (raw)
In-Reply-To: <1430793143-3610-1-git-send-email-helin.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

As offload capabilities of QinQ stripping and insertion are
supported by some of the supported hardware, the offload capability
flags should be added accordingly.

Signed-off-by: Helin Zhang <helin.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
 lib/librte_ether/rte_ethdev.h | 28 +++++++++++++++-------------
 1 file changed, 15 insertions(+), 13 deletions(-)

diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 4648290..1855b2e 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -881,23 +881,25 @@ struct rte_eth_conf {
 /**
  * RX offload capabilities of a device.
  */
-#define DEV_RX_OFFLOAD_VLAN_STRIP  0x00000001
-#define DEV_RX_OFFLOAD_IPV4_CKSUM  0x00000002
-#define DEV_RX_OFFLOAD_UDP_CKSUM   0x00000004
-#define DEV_RX_OFFLOAD_TCP_CKSUM   0x00000008
-#define DEV_RX_OFFLOAD_TCP_LRO     0x00000010
+#define DEV_RX_OFFLOAD_VLAN_STRIP       0x00000001
+#define DEV_RX_OFFLOAD_QINQ_STRIP       0x00000002
+#define DEV_RX_OFFLOAD_IPV4_CKSUM       0x00000004
+#define DEV_RX_OFFLOAD_UDP_CKSUM        0x00000008
+#define DEV_RX_OFFLOAD_TCP_CKSUM        0x00000010
+#define DEV_RX_OFFLOAD_TCP_LRO          0x00000020
 
 /**
  * TX offload capabilities of a device.
  */
-#define DEV_TX_OFFLOAD_VLAN_INSERT 0x00000001
-#define DEV_TX_OFFLOAD_IPV4_CKSUM  0x00000002
-#define DEV_TX_OFFLOAD_UDP_CKSUM   0x00000004
-#define DEV_TX_OFFLOAD_TCP_CKSUM   0x00000008
-#define DEV_TX_OFFLOAD_SCTP_CKSUM  0x00000010
-#define DEV_TX_OFFLOAD_TCP_TSO     0x00000020
-#define DEV_TX_OFFLOAD_UDP_TSO     0x00000040
-#define DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000080 /**< Used for tunneling packet. */
+#define DEV_TX_OFFLOAD_VLAN_INSERT      0x00000001
+#define DEV_TX_OFFLOAD_QINQ_INSERT      0x00000002
+#define DEV_TX_OFFLOAD_IPV4_CKSUM       0x00000004
+#define DEV_TX_OFFLOAD_UDP_CKSUM        0x00000008
+#define DEV_TX_OFFLOAD_TCP_CKSUM        0x00000010
+#define DEV_TX_OFFLOAD_SCTP_CKSUM       0x00000020
+#define DEV_TX_OFFLOAD_TCP_TSO          0x00000040
+#define DEV_TX_OFFLOAD_UDP_TSO          0x00000080
+#define DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000100
 
 struct rte_eth_dev_info {
 	struct rte_pci_device *pci_dev; /**< Device PCI information. */
-- 
1.9.3

  parent reply	other threads:[~2015-05-05  2:32 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-05  2:32 [PATCH RFC 0/6] support of QinQ stripping and insertion of i40e Helin Zhang
     [not found] ` <1430793143-3610-1-git-send-email-helin.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2015-05-05  2:32   ` [PATCH RFC 1/6] mbuf: update mbuf structure for QinQ support Helin Zhang
     [not found]     ` <1430793143-3610-2-git-send-email-helin.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2015-05-05 11:04       ` Ananyev, Konstantin
     [not found]         ` <2601191342CEEE43887BDE71AB97725821424AF9-pww93C2UFcwu0RiL9chJVbfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2015-05-05 15:42           ` Chilikin, Andrey
     [not found]             ` <AAC06825A3B29643AF5372F5E0DDF053350C7510-kPTMFJFq+rFT4JjzTwqWc7fspsVTdybXVpNB7YpNyf8@public.gmane.org>
2015-05-05 22:37               ` Ananyev, Konstantin
     [not found]                 ` <2601191342CEEE43887BDE71AB97725821424E6C-pww93C2UFcwu0RiL9chJVbfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2015-05-06  4:07                   ` Zhang, Helin
2015-05-06  4:06           ` Zhang, Helin
     [not found]             ` <F35DEAC7BCE34641BA9FAC6BCA4A12E70A859453-0J0gbvR4kTg/UvCtAeCM4rfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2015-05-06  8:39               ` Bruce Richardson
2015-05-06  8:48                 ` Zhang, Helin
2015-05-05  2:32   ` [PATCH RFC 2/6] i40e: reconfigure the hardware to support QinQ stripping/insertion Helin Zhang
2015-05-05  2:32   ` [PATCH RFC 3/6] i40e: support of QinQ stripping/insertion in RX/TX Helin Zhang
2015-05-05  2:32   ` Helin Zhang [this message]
2015-05-05  2:32   ` [PATCH RFC 5/6] i40e: update of offload capability flags Helin Zhang
2015-05-05  2:32   ` [PATCH RFC 6/6] app/testpmd: support of QinQ stripping and insertion Helin Zhang
2015-05-26  8:36 ` [PATCH 0/5] support i40e " Helin Zhang
2015-05-26  8:36   ` [PATCH 1/5] ixgbe: remove a discarded source line Helin Zhang
2015-06-01  8:50     ` Olivier MATZ
2015-06-02  1:45       ` Zhang, Helin
2015-05-26  8:36   ` [PATCH 2/5] mbuf: use the reserved 16 bits for double vlan Helin Zhang
2015-05-26 14:55     ` Stephen Hemminger
2015-05-26 15:00       ` Zhang, Helin
2015-05-26 15:02       ` Ananyev, Konstantin
2015-05-26 15:35         ` Stephen Hemminger
2015-05-26 15:46           ` Ananyev, Konstantin
2015-05-27  1:07             ` Zhang, Helin
2015-06-01  8:50     ` Olivier MATZ
2015-06-02  2:37       ` Zhang, Helin
2015-05-26  8:36   ` [PATCH 3/5] i40e: support double vlan stripping and insertion Helin Zhang
2015-06-01  8:50     ` Olivier MATZ
2015-06-02  2:45       ` Zhang, Helin
2015-05-26  8:36   ` [PATCH 4/5] i40evf: add supported offload capability flags Helin Zhang
2015-05-26  8:36   ` [PATCH 5/5] app/testpmd: add test cases for qinq stripping and insertion Helin Zhang
2015-06-02  3:16   ` [PATCH v2 0/6] support i40e QinQ " Helin Zhang
2015-06-02  3:16     ` [PATCH v2 1/6] ixgbe: remove a discarded source line Helin Zhang
2015-06-02  3:16     ` [PATCH v2 2/6] mbuf: use the reserved 16 bits for double vlan Helin Zhang
2015-06-02  3:16     ` [PATCH v2 3/6] i40e: support double vlan stripping and insertion Helin Zhang
2015-06-02  3:16     ` [PATCH v2 4/6] i40evf: add supported offload capability flags Helin Zhang
2015-06-02  3:16     ` [PATCH v2 5/6] app/testpmd: add test cases for qinq stripping and insertion Helin Zhang
2015-06-02  3:16     ` [PATCH v2 6/6] examples/ipv4_multicast: support double vlan " Helin Zhang
2015-06-02  7:37     ` [PATCH v2 0/6] support i40e QinQ " Liu, Jijiang
2015-06-08  7:32       ` Cao, Min
2015-06-08  7:40     ` Olivier MATZ
2015-06-11  7:03     ` [PATCH v3 0/7] " Helin Zhang
2015-06-11  7:03       ` [PATCH v3 1/7] ixgbe: remove a discarded source line Helin Zhang
2015-06-11  7:03       ` [PATCH v3 2/7] mbuf: use the reserved 16 bits for double vlan Helin Zhang
2015-06-25  8:31         ` Zhang, Helin
2015-06-28 20:36           ` Thomas Monjalon
2015-06-30  7:33             ` Olivier MATZ
2015-06-11  7:03       ` [PATCH v3 3/7] i40e: support double vlan stripping and insertion Helin Zhang
2015-06-11  7:03       ` [PATCH v3 4/7] i40evf: add supported offload capability flags Helin Zhang
2015-06-11  7:03       ` [PATCH v3 5/7] app/testpmd: add test cases for qinq stripping and insertion Helin Zhang
2015-06-11  7:03       ` [PATCH v3 6/7] examples/ipv4_multicast: support double vlan " Helin Zhang
2015-06-11  7:04       ` [PATCH v3 7/7] doc: update testpmd command Helin Zhang
2015-06-11  7:25       ` [PATCH v3 0/7] support i40e QinQ stripping and insertion Wu, Jingjing
2015-07-07 14:43         ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430793143-3610-5-git-send-email-helin.zhang@intel.com \
    --to=helin.zhang-ral2jqcrhueavxtiumwx3w@public.gmane.org \
    --cc=dev-VfR2kkLFssw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.