* [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform
@ 2015-05-18 13:06 Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 01/11] dm: gpio: uclass: Add flag to control sequence numbering Bhuvanchandra DV
` (12 more replies)
0 siblings, 13 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-05-18 13:06 UTC (permalink / raw)
To: u-boot
This patch-set adds GPIO driver, DSPI and device tree support
for Freescale Vybrid platform and Toradex Colibri Vybrid VF50,
VF61 modules.
Following cases are tested with Vybrid GPIO driver:
- with DM, without DT
- with DM and DT
Both the above cases were tested on Toradex Colibri Vybrid VF50, VF61
modules and both works fine.
- The patchset is based and tested on the latest master branch.
Bhuvanchandra DV (9):
dm: gpio: uclass: Add flag to control sequence numbering
dm: gpio: vf610: Add GPIO driver support
colibri_vf: Add pinmux entries for GPIOs
colibri_vf: Enable GPIO support
arm: vf610: Add clock support for DSPI
arm: vf610: Add iomux support for DSPI
vf610: dts: Add device tree support
colibri-vf: Enable SPI support
colibri_vf: Add separate defconfig for device tree support
Sanchayan Maity (2):
usb: ehci-vf: Add weak function for board specific initialisation
colibri_vf: Enable board specific USB initialisation for USB pen gpio
arch/arm/cpu/armv7/vf610/generic.c | 7 ++
arch/arm/dts/Makefile | 3 +
arch/arm/dts/vf-colibri.dtsi | 21 ++++
arch/arm/dts/vf.dtsi | 100 +++++++++++++++
arch/arm/dts/vf500-colibri.dts | 18 +++
arch/arm/dts/vf610-colibri.dts | 18 +++
arch/arm/imx-common/iomux-v3.c | 26 ++++
arch/arm/include/asm/arch-vf610/clock.h | 1 +
arch/arm/include/asm/arch-vf610/crm_regs.h | 4 +
arch/arm/include/asm/arch-vf610/gpio.h | 29 +++++
arch/arm/include/asm/arch-vf610/imx-regs.h | 5 +
arch/arm/include/asm/arch-vf610/iomux-vf610.h | 59 +++++++++
arch/arm/include/asm/imx-common/iomux-v3.h | 6 +
board/toradex/colibri_vf/colibri_vf.c | 106 ++++++++++++++++
configs/colibri_vf_defconfig | 1 +
configs/colibri_vf_dtb_defconfig | 6 +
drivers/gpio/Kconfig | 7 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-uclass.c | 1 +
drivers/gpio/vybrid_gpio.c | 169 ++++++++++++++++++++++++++
drivers/usb/host/ehci-vf.c | 8 ++
include/configs/colibri_vf.h | 16 +++
22 files changed, 612 insertions(+)
create mode 100644 arch/arm/dts/vf-colibri.dtsi
create mode 100644 arch/arm/dts/vf.dtsi
create mode 100644 arch/arm/dts/vf500-colibri.dts
create mode 100644 arch/arm/dts/vf610-colibri.dts
create mode 100644 arch/arm/include/asm/arch-vf610/gpio.h
create mode 100644 configs/colibri_vf_dtb_defconfig
create mode 100644 drivers/gpio/vybrid_gpio.c
--
2.1.0
^ permalink raw reply [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 01/11] dm: gpio: uclass: Add flag to control sequence numbering
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
@ 2015-05-18 13:06 ` Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 02/11] dm: gpio: vf610: Add GPIO driver support Bhuvanchandra DV
` (11 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-05-18 13:06 UTC (permalink / raw)
To: u-boot
Like SPI and I2C few GPIO controllers also have
multiple chip instances. This patch adds the
flag 'DM_UC_FLAG_SEQ_ALIAS' in gpio_uclass driver
to control device sequence numbering. By defalut
the dev->r_seq for gpio_uclass will alwalys
returns -1, which leads the gpio driver probe
failure when using the driver with device trees.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
drivers/gpio/gpio-uclass.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c
index 530bb3e..bf982b9 100644
--- a/drivers/gpio/gpio-uclass.c
+++ b/drivers/gpio/gpio-uclass.c
@@ -757,6 +757,7 @@ static int gpio_pre_remove(struct udevice *dev)
UCLASS_DRIVER(gpio) = {
.id = UCLASS_GPIO,
.name = "gpio",
+ .flags = DM_UC_FLAG_SEQ_ALIAS,
.post_probe = gpio_post_probe,
.pre_remove = gpio_pre_remove,
.per_device_auto_alloc_size = sizeof(struct gpio_dev_priv),
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 02/11] dm: gpio: vf610: Add GPIO driver support
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 01/11] dm: gpio: uclass: Add flag to control sequence numbering Bhuvanchandra DV
@ 2015-05-18 13:06 ` Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 03/11] colibri_vf: Add pinmux entries for GPIOs Bhuvanchandra DV
` (10 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-05-18 13:06 UTC (permalink / raw)
To: u-boot
Add GPIO driver support to Freescale VF610
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
arch/arm/imx-common/iomux-v3.c | 26 +++++
arch/arm/include/asm/arch-vf610/gpio.h | 29 +++++
arch/arm/include/asm/arch-vf610/imx-regs.h | 5 +
arch/arm/include/asm/imx-common/iomux-v3.h | 6 +
drivers/gpio/Kconfig | 7 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/vybrid_gpio.c | 169 +++++++++++++++++++++++++++++
7 files changed, 243 insertions(+)
create mode 100644 arch/arm/include/asm/arch-vf610/gpio.h
create mode 100644 drivers/gpio/vybrid_gpio.c
diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index e88e6e2..7fb23dd 100644
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -92,3 +92,29 @@ void imx_iomux_set_gpr_register(int group, int start_bit,
reg |= (value << start_bit);
writel(reg, base + group * 4);
}
+
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+void imx_iomux_gpio_set_direction(unsigned int gpio,
+ unsigned int direction)
+{
+ u32 reg;
+ /*
+ * Only on Vybrid the input/output buffer enable flags
+ * are part of the shared mux/conf register.
+ */
+ reg = readl(base + (gpio << 2));
+
+ if (direction)
+ reg |= 0x2;
+ else
+ reg &= ~0x2;
+
+ writel(reg, base + (gpio << 2));
+}
+
+void imx_iomux_gpio_get_function(unsigned int gpio, u32 *gpio_state)
+{
+ *gpio_state = readl(base + (gpio << 2)) &
+ ((0X07 << PAD_MUX_MODE_SHIFT) | PAD_CTL_OBE_IBE_ENABLE);
+}
+#endif
diff --git a/arch/arm/include/asm/arch-vf610/gpio.h b/arch/arm/include/asm/arch-vf610/gpio.h
new file mode 100644
index 0000000..622b8f0
--- /dev/null
+++ b/arch/arm/include/asm/arch-vf610/gpio.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2015
+ * Bhuvanchandra DV, Toradex, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __ASM_ARCH_VF610_GPIO_H
+#define __ASM_ARCH_VF610_GPIO_H
+
+#define VYBRID_GPIO_COUNT 32
+#define VF610_GPIO_DIRECTION_IN 0x0
+#define VF610_GPIO_DIRECTION_OUT 0x1
+
+/* GPIO registers */
+struct vybrid_gpio_regs {
+ u32 gpio_pdor;
+ u32 gpio_psor;
+ u32 gpio_pcor;
+ u32 gpio_ptor;
+ u32 gpio_pdir;
+};
+
+struct vybrid_gpio_platdata {
+ unsigned int chip;
+ u32 base;
+ const char *port_name;
+};
+#endif /* __ASM_ARCH_VF610_GPIO_H */
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index a7d765a..5a37193 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -81,6 +81,11 @@
#define VREG_DIG_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006D000)
#define SRC_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006E000)
#define CMU_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006F000)
+#define GPIO0_BASE_ADDR (AIPS0_BASE_ADDR + 0x000FF000)
+#define GPIO1_BASE_ADDR (AIPS0_BASE_ADDR + 0x000FF040)
+#define GPIO2_BASE_ADDR (AIPS0_BASE_ADDR + 0x000FF080)
+#define GPIO3_BASE_ADDR (AIPS0_BASE_ADDR + 0x000FF0C0)
+#define GPIO4_BASE_ADDR (AIPS0_BASE_ADDR + 0x000FF100)
/* AIPS 1 */
#define OCOTP_BASE_ADDR (AIPS1_BASE_ADDR + 0x00025000)
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index e0a49be..2581019 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -187,6 +187,12 @@ void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
*/
void imx_iomux_set_gpr_register(int group, int start_bit,
int num_bits, int value);
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+void imx_iomux_gpio_set_direction(unsigned int gpio,
+ unsigned int direction);
+void imx_iomux_gpio_get_function(unsigned int gpio,
+ u32 *gpio_state);
+#endif
/* macros for declaring and using pinmux array */
#if defined(CONFIG_MX6QDL)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 0840a30..0c43777 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -35,3 +35,10 @@ config SANDBOX_GPIO_COUNT
are specified using the device tree. But you can also have a number
of 'anonymous' GPIOs that do not belong to any device or bank.
Select a suitable value depending on your needs.
+
+config VYBRID_GPIO
+ bool "Vybrid GPIO driver"
+ depends on DM
+ default n
+ help
+ Say yes here to support Vybrid vf610 GPIOs.
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ba9efe8..5864850 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -45,3 +45,4 @@ obj-$(CONFIG_SUNXI_GPIO) += sunxi_gpio.o
obj-$(CONFIG_LPC32XX_GPIO) += lpc32xx_gpio.o
obj-$(CONFIG_STM32_GPIO) += stm32_gpio.o
obj-$(CONFIG_ZYNQ_GPIO) += zynq_gpio.o
+obj-$(CONFIG_VYBRID_GPIO) += vybrid_gpio.o
diff --git a/drivers/gpio/vybrid_gpio.c b/drivers/gpio/vybrid_gpio.c
new file mode 100644
index 0000000..6eaf0a9
--- /dev/null
+++ b/drivers/gpio/vybrid_gpio.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 2015
+ * Bhuvanchandra DV, Toradex, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/io.h>
+#include <malloc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct vybrid_gpios {
+ unsigned int chip;
+ struct vybrid_gpio_regs *reg;
+};
+
+static int vybrid_gpio_direction_input(struct udevice *dev, unsigned gpio)
+{
+ const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
+ gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
+ imx_iomux_gpio_set_direction(gpio, VF610_GPIO_DIRECTION_IN);
+
+ return 0;
+}
+
+static int vybrid_gpio_direction_output(struct udevice *dev, unsigned gpio,
+ int value)
+{
+ const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
+ gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
+ gpio_set_value(gpio, value);
+ imx_iomux_gpio_set_direction(gpio, VF610_GPIO_DIRECTION_OUT);
+
+ return 0;
+}
+
+static int vybrid_gpio_get_value(struct udevice *dev, unsigned gpio)
+{
+ const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
+ return ((readl(&gpios->reg->gpio_pdir) & (1 << gpio))) ? 1 : 0;
+}
+
+static int vybrid_gpio_set_value(struct udevice *dev, unsigned gpio,
+ int value)
+{
+ const struct vybrid_gpios *gpios = dev_get_priv(dev);
+ if (value)
+ writel((1 << gpio), &gpios->reg->gpio_psor);
+ else
+ writel((1 << gpio), &gpios->reg->gpio_pcor);
+
+ return 0;
+}
+
+static int vybrid_gpio_get_function(struct udevice *dev, unsigned gpio)
+{
+ const struct vybrid_gpios *gpios = dev_get_priv(dev);
+ u32 g_state = 0;
+
+ gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
+
+ imx_iomux_gpio_get_function(gpio, &g_state);
+
+ if (((g_state & (0x07 << PAD_MUX_MODE_SHIFT)) >> PAD_MUX_MODE_SHIFT) > 0)
+ return GPIOF_FUNC;
+ if (g_state & PAD_CTL_OBE_ENABLE)
+ return GPIOF_OUTPUT;
+ if (g_state & PAD_CTL_IBE_ENABLE)
+ return GPIOF_INPUT;
+ if (!(g_state & PAD_CTL_OBE_IBE_ENABLE))
+ return GPIOF_UNUSED;
+
+ return GPIOF_UNKNOWN;
+}
+
+static const struct dm_gpio_ops gpio_vybrid_ops = {
+ .direction_input = vybrid_gpio_direction_input,
+ .direction_output = vybrid_gpio_direction_output,
+ .get_value = vybrid_gpio_get_value,
+ .set_value = vybrid_gpio_set_value,
+ .get_function = vybrid_gpio_get_function,
+};
+
+static int vybrid_gpio_probe(struct udevice *dev)
+{
+ struct vybrid_gpios *gpios = dev_get_priv(dev);
+ struct vybrid_gpio_platdata *plat = dev_get_platdata(dev);
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ uc_priv->bank_name = plat->port_name;
+ uc_priv->gpio_count = VYBRID_GPIO_COUNT;
+ gpios->reg = (struct vybrid_gpio_regs *)plat->base;
+ gpios->chip = plat->chip;
+
+ return 0;
+}
+
+static int vybrid_gpio_bind(struct udevice *dev)
+{
+ struct vybrid_gpio_platdata *plat = dev->platdata;
+ fdt_addr_t base_addr;
+
+ if (plat)
+ return 0;
+
+ base_addr = dev_get_addr(dev);
+ if (base_addr == FDT_ADDR_T_NONE)
+ return -ENODEV;
+
+ /*
+ * TODO:
+ * When every board is converted to driver model and DT is
+ * supported, this can be done by auto-alloc feature, but
+ * not using calloc to alloc memory for platdata.
+ */
+ plat = calloc(1, sizeof(*plat));
+ if (!plat)
+ return -ENOMEM;
+
+ plat->base = base_addr;
+ plat->chip = dev->req_seq;
+ plat->port_name = fdt_get_name(gd->fdt_blob, dev->of_offset, NULL);
+ dev->platdata = plat;
+
+ return 0;
+}
+
+#ifndef CONFIG_OF_CONTROL
+static const struct vybrid_gpio_platdata vybrid_gpio[] = {
+ {0, GPIO0_BASE_ADDR, "GPIO0 "},
+ {1, GPIO1_BASE_ADDR, "GPIO1 "},
+ {2, GPIO2_BASE_ADDR, "GPIO2 "},
+ {3, GPIO3_BASE_ADDR, "GPIO3 "},
+ {4, GPIO4_BASE_ADDR, "GPIO4 "},
+};
+
+U_BOOT_DEVICES(vybrid_gpio) = {
+ { "gpio_vybrid", &vybrid_gpio[0] },
+ { "gpio_vybrid", &vybrid_gpio[1] },
+ { "gpio_vybrid", &vybrid_gpio[2] },
+ { "gpio_vybrid", &vybrid_gpio[3] },
+ { "gpio_vybrid", &vybrid_gpio[4] },
+};
+#endif
+
+static const struct udevice_id vybrid_gpio_ids[] = {
+ { .compatible = "fsl,vf610-gpio" },
+ { }
+};
+
+U_BOOT_DRIVER(gpio_vybrid) = {
+ .name = "gpio_vybrid",
+ .id = UCLASS_GPIO,
+ .ops = &gpio_vybrid_ops,
+ .probe = vybrid_gpio_probe,
+ .priv_auto_alloc_size = sizeof(struct vybrid_gpios),
+ .of_match = vybrid_gpio_ids,
+ .bind = vybrid_gpio_bind,
+};
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 03/11] colibri_vf: Add pinmux entries for GPIOs
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 01/11] dm: gpio: uclass: Add flag to control sequence numbering Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 02/11] dm: gpio: vf610: Add GPIO driver support Bhuvanchandra DV
@ 2015-05-18 13:06 ` Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 04/11] colibri_vf: Enable GPIO support Bhuvanchandra DV
` (9 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-05-18 13:06 UTC (permalink / raw)
To: u-boot
Inorder to use the pins as GPIO, apart from setting the alt-function,
pinmuxing need to be done, this patch adds pinmux entries of
few GPIOs.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
arch/arm/include/asm/arch-vf610/iomux-vf610.h | 49 ++++++++++++++++++++++
board/toradex/colibri_vf/colibri_vf.c | 60 +++++++++++++++++++++++++++
2 files changed, 109 insertions(+)
diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
index 9226e69..e22e3f9 100644
--- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -32,22 +32,56 @@
#define VF610_QSPI_PAD_CTRL (PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_150ohm | \
PAD_CTL_PUS_22K_UP | PAD_CTL_OBE_IBE_ENABLE)
+#define VF610_GPIO_PAD_CTRL (PAD_CTL_SPEED_MED | PAD_CTL_DSE_50ohm | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_IBE_ENABLE)
+
enum {
VF610_PAD_PTA6__RMII0_CLKIN = IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTA6__RMII0_CLKOUT = IOMUX_PAD(0x0000, 0x0000, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTA7__GPIO_134 = IOMUX_PAD(0x0218, 0x0218, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTA17__GPIO_7 = IOMUX_PAD(0x001c, 0x001c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTA20__GPIO_10 = IOMUX_PAD(0x0028, 0x0028, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTA21__GPIO_11 = IOMUX_PAD(0x002c, 0x002c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTA30__GPIO_20 = IOMUX_PAD(0x0050, 0x0050, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTA31__GPIO_21 = IOMUX_PAD(0x0054, 0x0054, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB0__GPIO_22 = IOMUX_PAD(0x0058, 0x0058, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB1__GPIO_23 = IOMUX_PAD(0x005C, 0x005C, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTB4__UART1_TX = IOMUX_PAD(0x0068, 0x0068, 2, 0x0380, 0, VF610_UART_PAD_CTRL),
VF610_PAD_PTB5__UART1_RX = IOMUX_PAD(0x006c, 0x006c, 2, 0x037c, 0, VF610_UART_PAD_CTRL),
+ VF610_PAD_PTB6__GPIO_28 = IOMUX_PAD(0x0070, 0x0070, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB7__GPIO_29 = IOMUX_PAD(0x0074, 0x0074, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB8__GPIO_30 = IOMUX_PAD(0x0078, 0x0078, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB9__GPIO_31 = IOMUX_PAD(0x007C, 0x007C, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTB10__UART0_TX = IOMUX_PAD(0x0080, 0x0080, 1, __NA_, 0, VF610_UART_PAD_CTRL),
VF610_PAD_PTB11__UART0_RX = IOMUX_PAD(0x0084, 0x0084, 1, __NA_, 0, VF610_UART_PAD_CTRL),
+ VF610_PAD_PTB12__GPIO_34 = IOMUX_PAD(0x0088, 0x0088, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB13__GPIO_35 = IOMUX_PAD(0x008c, 0x008c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB16__GPIO_38 = IOMUX_PAD(0x0098, 0x0098, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB17__GPIO_39 = IOMUX_PAD(0x009c, 0x009c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB18__GPIO_40 = IOMUX_PAD(0x00a0, 0x00a0, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB21__GPIO_43 = IOMUX_PAD(0x00ac, 0x00ac, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB22__GPIO_44 = IOMUX_PAD(0x00b0, 0x00b0, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB23__GPIO_93 = IOMUX_PAD(0x0174, 0x0174, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB26__GPIO_96 = IOMUX_PAD(0x0180, 0x0180, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB28__GPIO_98 = IOMUX_PAD(0x0188, 0x0188, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTC1__GPIO_46 = IOMUX_PAD(0x00b8, 0x00b8, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC1__RMII0_MDIO = IOMUX_PAD(0x00b8, 0x00b8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC0__GPIO_45 = IOMUX_PAD(0x00b4, 0x00b4, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC0__RMII0_MDC = IOMUX_PAD(0x00b4, 0x00b4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTC2__RMII0_CRS_DV = IOMUX_PAD(0x00bc, 0x00bc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC2__GPIO_47 = IOMUX_PAD(0x00bc, 0x00bc, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC3__RMII0_RD1 = IOMUX_PAD(0x00c0, 0x00c0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC3__GPIO_48 = IOMUX_PAD(0x00c0, 0x00c0, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC4__RMII0_RD0 = IOMUX_PAD(0x00c4, 0x00c4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC4__GPIO_49 = IOMUX_PAD(0x00c4, 0x00c4, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC5__RMII0_RXER = IOMUX_PAD(0x00c8, 0x00c8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC5__GPIO_50 = IOMUX_PAD(0x00c8, 0x00c8, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC6__RMII0_TD1 = IOMUX_PAD(0x00cc, 0x00cc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC6__GPIO_51 = IOMUX_PAD(0x00cc, 0x00cc, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC7__RMII0_TD0 = IOMUX_PAD(0x00D0, 0x00D0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC7__GPIO_52 = IOMUX_PAD(0x00D0, 0x00D0, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC8__RMII0_TXEN = IOMUX_PAD(0x00D4, 0x00D4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC8__GPIO_53 = IOMUX_PAD(0x00D4, 0x00D4, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC10__RMII1_MDIO = IOMUX_PAD(0x00dc, 0x00dc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTC9__RMII1_MDC = IOMUX_PAD(0x00d8, 0x00d8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTC11__RMII1_CRS_DV = IOMUX_PAD(0x00e0, 0x00e0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
@@ -57,6 +91,8 @@ enum {
VF610_PAD_PTC15__RMII1_TD1 = IOMUX_PAD(0x00f0, 0x00f0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTC16__RMII1_TD0 = IOMUX_PAD(0x00f4, 0x00f4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTC17__RMII1_TXEN = IOMUX_PAD(0x00f8, 0x00f8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC29__GPIO_102 = IOMUX_PAD(0x0198, 0x0198, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTC30__GPIO_103 = IOMUX_PAD(0x019c, 0x019c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTA24__ESDHC1_CLK = IOMUX_PAD(0x0038, 0x0038, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
VF610_PAD_PTA25__ESDHC1_CMD = IOMUX_PAD(0x003c, 0x003c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
VF610_PAD_PTA26__ESDHC1_DAT0 = IOMUX_PAD(0x0040, 0x0040, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
@@ -66,13 +102,21 @@ enum {
VF610_PAD_PTB14__I2C0_SCL = IOMUX_PAD(0x0090, 0x0090, 2, 0x033c, 1, VF610_I2C_PAD_CTRL),
VF610_PAD_PTB15__I2C0_SDA = IOMUX_PAD(0x0094, 0x0094, 2, 0x0340, 1, VF610_I2C_PAD_CTRL),
VF610_PAD_PTD31__NF_IO15 = IOMUX_PAD(0x00fc, 0x00fc, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD31__GPIO_63 = IOMUX_PAD(0x00fc, 0x00fc, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD30__NF_IO14 = IOMUX_PAD(0x0100, 0x0100, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD30__GPIO_64 = IOMUX_PAD(0x0100, 0x0100, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD29__NF_IO13 = IOMUX_PAD(0x0104, 0x0104, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD29__GPIO_65 = IOMUX_PAD(0x0104, 0x0104, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD28__NF_IO12 = IOMUX_PAD(0x0108, 0x0108, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD28__GPIO_66 = IOMUX_PAD(0x0108, 0x0108, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD27__NF_IO11 = IOMUX_PAD(0x010c, 0x010c, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD27__GPIO_67 = IOMUX_PAD(0x010c, 0x010c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD26__NF_IO10 = IOMUX_PAD(0x0110, 0x0110, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD26__GPIO_68 = IOMUX_PAD(0x0110, 0x0110, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD25__NF_IO9 = IOMUX_PAD(0x0114, 0x0114, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD25__GPIO_69 = IOMUX_PAD(0x0114, 0x0114, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD24__NF_IO8 = IOMUX_PAD(0x0118, 0x0118, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD24__GPIO_70 = IOMUX_PAD(0x0118, 0x0118, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD23__NF_IO7 = IOMUX_PAD(0x011c, 0x011c, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
VF610_PAD_PTD0__QSPI0_A_QSCK = IOMUX_PAD(0x013c, 0x013c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
VF610_PAD_PTD1__QSPI0_A_CS0 = IOMUX_PAD(0x0140, 0x0140, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
@@ -83,9 +127,14 @@ enum {
VF610_PAD_PTD7__QSPI0_B_QSCK = IOMUX_PAD(0x0158, 0x0158, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
VF610_PAD_PTD8__QSPI0_B_CS0 = IOMUX_PAD(0x015c, 0x015c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
VF610_PAD_PTD9__QSPI0_B_DATA3 = IOMUX_PAD(0x0160, 0x0160, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+ VF610_PAD_PTD9__GPIO_88 = IOMUX_PAD(0x0160, 0x0160, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD10__QSPI0_B_DATA2 = IOMUX_PAD(0x0164, 0x0164, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+ VF610_PAD_PTD10__GPIO_89 = IOMUX_PAD(0x0164, 0x0164, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD11__QSPI0_B_DATA1 = IOMUX_PAD(0x0168, 0x0168, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+ VF610_PAD_PTD11__GPIO_90 = IOMUX_PAD(0x0168, 0x0168, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD12__QSPI0_B_DATA0 = IOMUX_PAD(0x016c, 0x016c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+ VF610_PAD_PTD12__GPIO_91 = IOMUX_PAD(0x016c, 0x016c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTD13__GPIO_92 = IOMUX_PAD(0x0170, 0x0170, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD22__NF_IO6 = IOMUX_PAD(0x0120, 0x0120, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
VF610_PAD_PTD21__NF_IO5 = IOMUX_PAD(0x0124, 0x0124, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
VF610_PAD_PTD20__NF_IO4 = IOMUX_PAD(0x0128, 0x0128, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index 31ebb19..e354c6d 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -146,6 +146,62 @@ static void setup_iomux_nfc(void)
}
#endif
+#ifdef CONFIG_VYBRID_GPIO
+static void setup_iomux_gpio(void)
+{
+ static const iomux_v3_cfg_t gpio_pads[] = {
+ VF610_PAD_PTA17__GPIO_7,
+ VF610_PAD_PTA20__GPIO_10,
+ VF610_PAD_PTA21__GPIO_11,
+ VF610_PAD_PTA30__GPIO_20,
+ VF610_PAD_PTA31__GPIO_21,
+ VF610_PAD_PTB0__GPIO_22,
+ VF610_PAD_PTB1__GPIO_23,
+ VF610_PAD_PTB6__GPIO_28,
+ VF610_PAD_PTB7__GPIO_29,
+ VF610_PAD_PTB8__GPIO_30,
+ VF610_PAD_PTB9__GPIO_31,
+ VF610_PAD_PTB12__GPIO_34,
+ VF610_PAD_PTB13__GPIO_35,
+ VF610_PAD_PTB16__GPIO_38,
+ VF610_PAD_PTB17__GPIO_39,
+ VF610_PAD_PTB18__GPIO_40,
+ VF610_PAD_PTB21__GPIO_43,
+ VF610_PAD_PTB22__GPIO_44,
+ VF610_PAD_PTC0__GPIO_45,
+ VF610_PAD_PTC1__GPIO_46,
+ VF610_PAD_PTC2__GPIO_47,
+ VF610_PAD_PTC3__GPIO_48,
+ VF610_PAD_PTC4__GPIO_49,
+ VF610_PAD_PTC5__GPIO_50,
+ VF610_PAD_PTC6__GPIO_51,
+ VF610_PAD_PTC7__GPIO_52,
+ VF610_PAD_PTC8__GPIO_53,
+ VF610_PAD_PTD31__GPIO_63,
+ VF610_PAD_PTD30__GPIO_64,
+ VF610_PAD_PTD29__GPIO_65,
+ VF610_PAD_PTD28__GPIO_66,
+ VF610_PAD_PTD27__GPIO_67,
+ VF610_PAD_PTD26__GPIO_68,
+ VF610_PAD_PTD25__GPIO_69,
+ VF610_PAD_PTD24__GPIO_70,
+ VF610_PAD_PTD9__GPIO_88,
+ VF610_PAD_PTD10__GPIO_89,
+ VF610_PAD_PTD11__GPIO_90,
+ VF610_PAD_PTD12__GPIO_91,
+ VF610_PAD_PTD13__GPIO_92,
+ VF610_PAD_PTB23__GPIO_93,
+ VF610_PAD_PTB26__GPIO_96,
+ VF610_PAD_PTB28__GPIO_98,
+ VF610_PAD_PTC29__GPIO_102,
+ VF610_PAD_PTC30__GPIO_103,
+ VF610_PAD_PTA7__GPIO_134,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
+}
+#endif
+
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg esdhc_cfg[1] = {
{ESDHC1_BASE_ADDR},
@@ -304,6 +360,10 @@ int board_early_init_f(void)
setup_iomux_nfc();
#endif
+#ifdef CONFIG_VYBRID_GPIO
+ setup_iomux_gpio();
+#endif
+
return 0;
}
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 04/11] colibri_vf: Enable GPIO support
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
` (2 preceding siblings ...)
2015-05-18 13:06 ` [U-Boot] [PATCH 03/11] colibri_vf: Add pinmux entries for GPIOs Bhuvanchandra DV
@ 2015-05-18 13:06 ` Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 05/11] arm: vf610: Add clock support for DSPI Bhuvanchandra DV
` (8 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-05-18 13:06 UTC (permalink / raw)
To: u-boot
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
configs/colibri_vf_defconfig | 1 +
include/configs/colibri_vf.h | 5 +++++
2 files changed, 6 insertions(+)
diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index 0df337c..a527086 100644
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -1,3 +1,4 @@
CONFIG_ARM=y
CONFIG_TARGET_COLIBRI_VF=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND"
+CONFIG_DM=y
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 414600a..42555fb 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -55,6 +55,11 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
+/* GPIO support */
+#define CONFIG_DM_GPIO
+#define CONFIG_CMD_GPIO
+#define CONFIG_VYBRID_GPIO
+
/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
#define CONFIG_MTD_PARTITIONS
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 05/11] arm: vf610: Add clock support for DSPI
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
` (3 preceding siblings ...)
2015-05-18 13:06 ` [U-Boot] [PATCH 04/11] colibri_vf: Enable GPIO support Bhuvanchandra DV
@ 2015-05-18 13:06 ` Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 06/11] arm: vf610: Add iomux " Bhuvanchandra DV
` (7 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-05-18 13:06 UTC (permalink / raw)
To: u-boot
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
arch/arm/cpu/armv7/vf610/generic.c | 7 +++++++
arch/arm/include/asm/arch-vf610/clock.h | 1 +
arch/arm/include/asm/arch-vf610/crm_regs.h | 4 ++++
3 files changed, 12 insertions(+)
diff --git a/arch/arm/cpu/armv7/vf610/generic.c b/arch/arm/cpu/armv7/vf610/generic.c
index 1bb9b8e..05c401d 100644
--- a/arch/arm/cpu/armv7/vf610/generic.c
+++ b/arch/arm/cpu/armv7/vf610/generic.c
@@ -198,6 +198,11 @@ static u32 get_i2c_clk(void)
return get_ipg_clk();
}
+static u32 get_dspi_clk(void)
+{
+ return get_ipg_clk();
+}
+
unsigned int mxc_get_clock(enum mxc_clock clk)
{
switch (clk) {
@@ -215,6 +220,8 @@ unsigned int mxc_get_clock(enum mxc_clock clk)
return get_fec_clk();
case MXC_I2C_CLK:
return get_i2c_clk();
+ case MXC_DSPI_CLK:
+ return get_dspi_clk();
default:
break;
}
diff --git a/arch/arm/include/asm/arch-vf610/clock.h b/arch/arm/include/asm/arch-vf610/clock.h
index 535adad..e5a5c6d 100644
--- a/arch/arm/include/asm/arch-vf610/clock.h
+++ b/arch/arm/include/asm/arch-vf610/clock.h
@@ -17,6 +17,7 @@ enum mxc_clock {
MXC_ESDHC_CLK,
MXC_FEC_CLK,
MXC_I2C_CLK,
+ MXC_DSPI_CLK,
};
void enable_ocotp_clk(unsigned char enable);
diff --git a/arch/arm/include/asm/arch-vf610/crm_regs.h b/arch/arm/include/asm/arch-vf610/crm_regs.h
index bc6db2a..fdb45e9 100644
--- a/arch/arm/include/asm/arch-vf610/crm_regs.h
+++ b/arch/arm/include/asm/arch-vf610/crm_regs.h
@@ -189,6 +189,8 @@ struct anadig_reg {
#define CCM_REG_CTRL_MASK 0xffffffff
#define CCM_CCGR0_UART0_CTRL_MASK (0x3 << 14)
#define CCM_CCGR0_UART1_CTRL_MASK (0x3 << 16)
+#define CCM_CCGR0_DSPI0_CTRL_MASK (0x3 << 24)
+#define CCM_CCGR0_DSPI1_CTRL_MASK (0x3 << 26)
#define CCM_CCGR1_USBC0_CTRL_MASK (0x3 << 8)
#define CCM_CCGR1_PIT_CTRL_MASK (0x3 << 14)
#define CCM_CCGR1_WDOGA5_CTRL_MASK (0x3 << 28)
@@ -206,6 +208,8 @@ struct anadig_reg {
#define CCM_CCGR4_GPC_CTRL_MASK (0x3 << 24)
#define CCM_CCGR4_I2C0_CTRL_MASK (0x3 << 12)
#define CCM_CCGR6_OCOTP_CTRL_MASK (0x3 << 10)
+#define CCM_CCGR6_DSPI2_CTRL_MASK (0x3 << 24)
+#define CCM_CCGR6_DSPI3_CTRL_MASK (0x3 << 26)
#define CCM_CCGR6_DDRMC_CTRL_MASK (0x3 << 28)
#define CCM_CCGR7_SDHC1_CTRL_MASK (0x3 << 4)
#define CCM_CCGR7_USBC1_CTRL_MASK (0x3 << 8)
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 06/11] arm: vf610: Add iomux support for DSPI
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
` (4 preceding siblings ...)
2015-05-18 13:06 ` [U-Boot] [PATCH 05/11] arm: vf610: Add clock support for DSPI Bhuvanchandra DV
@ 2015-05-18 13:06 ` Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 07/11] vf610: dts: Add device tree support Bhuvanchandra DV
` (6 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-05-18 13:06 UTC (permalink / raw)
To: u-boot
Add iomux definitions for DSPI second instance.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
arch/arm/include/asm/arch-vf610/iomux-vf610.h | 9 +++++++++
board/toradex/colibri_vf/colibri_vf.c | 21 +++++++++++++++++++++
2 files changed, 30 insertions(+)
diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
index e22e3f9..b8b22b1 100644
--- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -35,6 +35,11 @@
#define VF610_GPIO_PAD_CTRL (PAD_CTL_SPEED_MED | PAD_CTL_DSE_50ohm | \
PAD_CTL_PUS_47K_UP | PAD_CTL_IBE_ENABLE)
+#define VF610_DSPI_PAD_CTRL (PAD_CTL_OBE_ENABLE | PAD_CTL_DSE_20ohm | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH)
+#define VF610_DSPI_SIN_PAD_CTRL (PAD_CTL_IBE_ENABLE | PAD_CTL_DSE_20ohm | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH)
+
enum {
VF610_PAD_PTA6__RMII0_CLKIN = IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTA6__RMII0_CLKOUT = IOMUX_PAD(0x0000, 0x0000, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
@@ -91,6 +96,10 @@ enum {
VF610_PAD_PTC15__RMII1_TD1 = IOMUX_PAD(0x00f0, 0x00f0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTC16__RMII1_TD0 = IOMUX_PAD(0x00f4, 0x00f4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTC17__RMII1_TXEN = IOMUX_PAD(0x00f8, 0x00f8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTD5__DSPI1_CS0 = IOMUX_PAD(0x0150, 0x0150, 3, 0x300, 1, VF610_DSPI_PAD_CTRL),
+ VF610_PAD_PTD6__DSPI1_SIN = IOMUX_PAD(0x0154, 0x0154, 3, 0x2fc, 1, VF610_DSPI_SIN_PAD_CTRL),
+ VF610_PAD_PTD7__DSPI1_SOUT = IOMUX_PAD(0x0158, 0x0158, 3, __NA_, 0, VF610_DSPI_PAD_CTRL),
+ VF610_PAD_PTD8__DSPI1_SCK = IOMUX_PAD(0x015c, 0x015c, 3, 0x2f8, 1, VF610_DSPI_PAD_CTRL),
VF610_PAD_PTC29__GPIO_102 = IOMUX_PAD(0x0198, 0x0198, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC30__GPIO_103 = IOMUX_PAD(0x019c, 0x019c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTA24__ESDHC1_CLK = IOMUX_PAD(0x0038, 0x0038, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index e354c6d..7173022 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -146,6 +146,20 @@ static void setup_iomux_nfc(void)
}
#endif
+#ifdef CONFIG_FSL_DSPI
+static void setup_iomux_dspi(void)
+{
+ static const iomux_v3_cfg_t dspi1_pads[] = {
+ VF610_PAD_PTD5__DSPI1_CS0,
+ VF610_PAD_PTD6__DSPI1_SIN,
+ VF610_PAD_PTD7__DSPI1_SOUT,
+ VF610_PAD_PTD8__DSPI1_SCK,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(dspi1_pads, ARRAY_SIZE(dspi1_pads));
+}
+#endif
+
#ifdef CONFIG_VYBRID_GPIO
static void setup_iomux_gpio(void)
{
@@ -252,6 +266,9 @@ static void clock_init(void)
clrsetbits_le32(&ccm->ccgr0, CCM_REG_CTRL_MASK,
CCM_CCGR0_UART0_CTRL_MASK);
+#ifdef CONFIG_FSL_DSPI
+ setbits_le32(&ccm->ccgr0, CCM_CCGR0_DSPI1_CTRL_MASK);
+#endif
clrsetbits_le32(&ccm->ccgr1, CCM_REG_CTRL_MASK,
CCM_CCGR1_PIT_CTRL_MASK | CCM_CCGR1_WDOGA5_CTRL_MASK);
clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK,
@@ -364,6 +381,10 @@ int board_early_init_f(void)
setup_iomux_gpio();
#endif
+#ifdef CONFIG_FSL_DSPI
+ setup_iomux_dspi();
+#endif
+
return 0;
}
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 07/11] vf610: dts: Add device tree support
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
` (5 preceding siblings ...)
2015-05-18 13:06 ` [U-Boot] [PATCH 06/11] arm: vf610: Add iomux " Bhuvanchandra DV
@ 2015-05-18 13:06 ` Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 08/11] colibri-vf: Enable SPI support Bhuvanchandra DV
` (5 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-05-18 13:06 UTC (permalink / raw)
To: u-boot
Add device tree files for Freescale Vybrid platform and
Toradex Colibri VF50, VF61 modules.
Device tree files are taken from upstream Kernel.
Removed the stuff which are not used/supported yet in U-Boot.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
arch/arm/dts/Makefile | 3 ++
arch/arm/dts/vf-colibri.dtsi | 21 +++++++++
arch/arm/dts/vf.dtsi | 100 +++++++++++++++++++++++++++++++++++++++++
arch/arm/dts/vf500-colibri.dts | 18 ++++++++
arch/arm/dts/vf610-colibri.dts | 18 ++++++++
5 files changed, 160 insertions(+)
create mode 100644 arch/arm/dts/vf-colibri.dtsi
create mode 100644 arch/arm/dts/vf.dtsi
create mode 100644 arch/arm/dts/vf500-colibri.dts
create mode 100644 arch/arm/dts/vf610-colibri.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 267fd17..55039df 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -130,6 +130,9 @@ dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
+ vf610-colibri.dtb
+
targets += $(dtb-y)
DTC_FLAGS += -R 4 -p 0x1000
diff --git a/arch/arm/dts/vf-colibri.dtsi b/arch/arm/dts/vf-colibri.dtsi
new file mode 100644
index 0000000..7a8e9bee
--- /dev/null
+++ b/arch/arm/dts/vf-colibri.dtsi
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+ or X11
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include "vf.dtsi"
+
+&dspi1 {
+ status = "okay";
+ bus-num = <1>;
+
+ spi_cmd: sspi at 0 {
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
diff --git a/arch/arm/dts/vf.dtsi b/arch/arm/dts/vf.dtsi
new file mode 100644
index 0000000..78706e1
--- /dev/null
+++ b/arch/arm/dts/vf.dtsi
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+ or X11
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ spi0 = &dspi0;
+ spi1 = &dspi1;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ aips0: aips-bus at 40000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dspi0: dspi0 at 4002c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x4002c000 0x1000>;
+ num-cs = <5>;
+ status = "disabled";
+ };
+
+ dspi1: dspi1 at 4002d000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x4002d000 0x1000>;
+ num-cs = <5>;
+ status = "disabled";
+ };
+
+ qspi0: quadspi at 40044000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-qspi";
+ reg = <0x40044000 0x1000>;
+ status = "disabled";
+ };
+
+ gpio0: gpio at 40049000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x400ff000 0x40>;
+ #gpio-cells = <2>;
+ };
+
+ gpio1: gpio at 4004a000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x400ff040 0x40>;
+ #gpio-cells = <2>;
+ };
+
+ gpio2: gpio at 4004b000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x400ff080 0x40>;
+ #gpio-cells = <2>;
+ };
+
+ gpio3: gpio at 4004c000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x400ff0c0 0x40>;
+ #gpio-cells = <2>;
+ };
+
+ gpio4: gpio at 4004d000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x400ff100 0x40>;
+ #gpio-cells = <2>;
+ };
+ };
+
+ aips1: aips-bus at 40080000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
+ };
+};
diff --git a/arch/arm/dts/vf500-colibri.dts b/arch/arm/dts/vf500-colibri.dts
new file mode 100644
index 0000000..e383306
--- /dev/null
+++ b/arch/arm/dts/vf500-colibri.dts
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+ or X11
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf-colibri.dtsi"
+
+/ {
+ model = "Toradex Colibri VF50";
+ compatible = "toradex,vf500-colibri_vf50", "toradex,vf500-colibri_vf50", "fsl,vf500";
+};
diff --git a/arch/arm/dts/vf610-colibri.dts b/arch/arm/dts/vf610-colibri.dts
new file mode 100644
index 0000000..63bb3f4
--- /dev/null
+++ b/arch/arm/dts/vf610-colibri.dts
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+ or X11
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf-colibri.dtsi"
+
+/ {
+ model = "Toradex Colibri VF61";
+ compatible = "toradex,vf610-colibri_vf61", "toradex,vf610-colibri_vf61", "fsl,vf610";
+};
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 08/11] colibri-vf: Enable SPI support
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
` (6 preceding siblings ...)
2015-05-18 13:06 ` [U-Boot] [PATCH 07/11] vf610: dts: Add device tree support Bhuvanchandra DV
@ 2015-05-18 13:06 ` Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 09/11] colibri_vf: Add separate defconfig for device tree support Bhuvanchandra DV
` (4 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-05-18 13:06 UTC (permalink / raw)
To: u-boot
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
include/configs/colibri_vf.h | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 42555fb..25a9bf9 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -273,4 +273,15 @@
#define CONFIG_USB_GADGET_MASS_STORAGE
#define CONFIG_CMD_USB_MASS_STORAGE
+/* Enable SPI support */
+#define CONFIG_DM_SPI
+#define CONFIG_CMD_SPI
+#define CONFIG_FSL_DSPI
+
+#ifndef CONFIG_OF_CONTROL
+#undef CONFIG_DM_SPI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_FSL_DSPI
+#endif
+
#endif /* __CONFIG_H */
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 09/11] colibri_vf: Add separate defconfig for device tree support
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
` (7 preceding siblings ...)
2015-05-18 13:06 ` [U-Boot] [PATCH 08/11] colibri-vf: Enable SPI support Bhuvanchandra DV
@ 2015-05-18 13:06 ` Bhuvanchandra DV
2015-06-01 7:45 ` Stefano Babic
2015-05-18 13:06 ` [U-Boot] [PATCH 10/11] usb: ehci-vf: Add weak function for board specific initialisation Bhuvanchandra DV
` (3 subsequent siblings)
12 siblings, 1 reply; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-05-18 13:06 UTC (permalink / raw)
To: u-boot
Most of the drivers available for Vybrid are not yet converted
to OF model to use device tree model, only few drivers
like SPI and GPIO drivers use device trees.
Add separate defconfig for who needs to use device tree model.
Later this can be integrated to single defconfig.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
configs/colibri_vf_dtb_defconfig | 6 ++++++
1 file changed, 6 insertions(+)
create mode 100644 configs/colibri_vf_dtb_defconfig
diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
new file mode 100644
index 0000000..28ff1e9
--- /dev/null
+++ b/configs/colibri_vf_dtb_defconfig
@@ -0,0 +1,6 @@
+CONFIG_ARM=y
+CONFIG_TARGET_COLIBRI_VF=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND"
+CONFIG_DM=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 10/11] usb: ehci-vf: Add weak function for board specific initialisation
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
` (8 preceding siblings ...)
2015-05-18 13:06 ` [U-Boot] [PATCH 09/11] colibri_vf: Add separate defconfig for device tree support Bhuvanchandra DV
@ 2015-05-18 13:06 ` Bhuvanchandra DV
2015-05-18 17:09 ` Marek Vasut
2015-05-18 13:06 ` [U-Boot] [PATCH 11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio Bhuvanchandra DV
` (2 subsequent siblings)
12 siblings, 1 reply; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-05-18 13:06 UTC (permalink / raw)
To: u-boot
From: Sanchayan Maity <maitysanchayan@gmail.com>
Add a weak function board_ehci_hcd_init which can be used by the board
file for board specific initialisation.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
---
drivers/usb/host/ehci-vf.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/usb/host/ehci-vf.c b/drivers/usb/host/ehci-vf.c
index 5454855..98e0fc6 100644
--- a/drivers/usb/host/ehci-vf.c
+++ b/drivers/usb/host/ehci-vf.c
@@ -121,6 +121,11 @@ static void usb_oc_config(int index)
setbits_le32(ctrl, UCTRL_OVER_CUR_DIS);
}
+int __weak board_ehci_hcd_init(int port)
+{
+ return 0;
+}
+
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
@@ -136,6 +141,9 @@ int ehci_hcd_init(int index, enum usb_init_type init,
ehci = (struct usb_ehci *)nc_reg_bases[index];
+ /* Do board specific initialisation */
+ board_ehci_hcd_init(index);
+
usb_power_config(index);
usb_oc_config(index);
usb_internal_phy_clock_gate(index);
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
` (9 preceding siblings ...)
2015-05-18 13:06 ` [U-Boot] [PATCH 10/11] usb: ehci-vf: Add weak function for board specific initialisation Bhuvanchandra DV
@ 2015-05-18 13:06 ` Bhuvanchandra DV
2015-05-24 19:34 ` [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
12 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-05-18 13:06 UTC (permalink / raw)
To: u-boot
From: Sanchayan Maity <maitysanchayan@gmail.com>
Add IOMUX for the pad used as USB pen. This needs to be driven low for
the Iris and Viola boards where it is pulled up high by default. This is
required for the USB host functionality to work on these boards. Use the
board specific weak initialisation function, to drive the pin low which
would be called on "usb start".
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
---
arch/arm/include/asm/arch-vf610/iomux-vf610.h | 1 +
board/toradex/colibri_vf/colibri_vf.c | 25 +++++++++++++++++++++++++
2 files changed, 26 insertions(+)
diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
index b8b22b1..019307b 100644
--- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -131,6 +131,7 @@ enum {
VF610_PAD_PTD1__QSPI0_A_CS0 = IOMUX_PAD(0x0140, 0x0140, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
VF610_PAD_PTD2__QSPI0_A_DATA3 = IOMUX_PAD(0x0144, 0x0144, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
VF610_PAD_PTD3__QSPI0_A_DATA2 = IOMUX_PAD(0x0148, 0x0148, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+ VF610_PAD_PTD4__GPIO_83 = IOMUX_PAD(0x014C, 0x014C, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD4__QSPI0_A_DATA1 = IOMUX_PAD(0x014c, 0x014c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
VF610_PAD_PTD5__QSPI0_A_DATA0 = IOMUX_PAD(0x0150, 0x0150, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
VF610_PAD_PTD7__QSPI0_B_QSCK = IOMUX_PAD(0x0158, 0x0158, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index 7173022..8618fd0 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -20,6 +20,7 @@
#include <netdev.h>
#include <i2c.h>
#include <g_dnl.h>
+#include <asm/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -32,6 +33,12 @@ DECLARE_GLOBAL_DATA_PTR;
#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE)
+#define USB_PEN_GPIO 83
+
+static const iomux_v3_cfg_t usb_pads[] = {
+ VF610_PAD_PTD4__GPIO_83,
+};
+
int dram_init(void)
{
static const struct ddr3_jedec_timings timings = {
@@ -464,3 +471,21 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
return 0;
}
+
+#ifdef CONFIG_USB_EHCI_VF
+int board_ehci_hcd_init(int port)
+{
+ imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
+
+ switch (port) {
+ case 0:
+ /* USBC does not have PEN, also configured as USB client only */
+ break;
+ case 1:
+ gpio_request(USB_PEN_GPIO, "usb-pen-gpio");
+ gpio_direction_output(USB_PEN_GPIO, 0);
+ break;
+ }
+ return 0;
+}
+#endif
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 10/11] usb: ehci-vf: Add weak function for board specific initialisation
2015-05-18 13:06 ` [U-Boot] [PATCH 10/11] usb: ehci-vf: Add weak function for board specific initialisation Bhuvanchandra DV
@ 2015-05-18 17:09 ` Marek Vasut
2015-05-18 18:52 ` maitysanchayan at gmail.com
0 siblings, 1 reply; 39+ messages in thread
From: Marek Vasut @ 2015-05-18 17:09 UTC (permalink / raw)
To: u-boot
On Monday, May 18, 2015 at 03:06:28 PM, Bhuvanchandra DV wrote:
> From: Sanchayan Maity <maitysanchayan@gmail.com>
>
> Add a weak function board_ehci_hcd_init which can be used by the board
> file for board specific initialisation.
>
> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
What I do not like is that you're sending a patch series which affects
multiple subsystems and which contains patches which should go through
multiple trees. Yet, you submit it all in one huge series.
I guess the best way out of this is to push all this stuff via u-boot-imx now?
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 10/11] usb: ehci-vf: Add weak function for board specific initialisation
2015-05-18 17:09 ` Marek Vasut
@ 2015-05-18 18:52 ` maitysanchayan at gmail.com
2015-05-18 19:04 ` Marek Vasut
0 siblings, 1 reply; 39+ messages in thread
From: maitysanchayan at gmail.com @ 2015-05-18 18:52 UTC (permalink / raw)
To: u-boot
Hello Marek,
On 15-05-18 19:09:58, Marek Vasut wrote:
> On Monday, May 18, 2015 at 03:06:28 PM, Bhuvanchandra DV wrote:
> > From: Sanchayan Maity <maitysanchayan@gmail.com>
> >
> > Add a weak function board_ehci_hcd_init which can be used by the board
> > file for board specific initialisation.
> >
> > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
>
> Acked-by: Marek Vasut <marex@denx.de>
>
> What I do not like is that you're sending a patch series which affects
> multiple subsystems and which contains patches which should go through
> multiple trees. Yet, you submit it all in one huge series.
If required I can send in the last two patches affecting the USB
susbsystem later once the rest of the patchset gets merged, if this is
not acceptable?.
Since these last two were dependent on the GPIO patches I thought
perhaps it is better that they go along with the GPIO patches as a
coherent whole.
>
> I guess the best way out of this is to push all this stuff via u-boot-imx now?
>
> Best regards,
> Marek Vasut
Thanks & Regards,
Sanchayan Maity.
^ permalink raw reply [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 10/11] usb: ehci-vf: Add weak function for board specific initialisation
2015-05-18 18:52 ` maitysanchayan at gmail.com
@ 2015-05-18 19:04 ` Marek Vasut
0 siblings, 0 replies; 39+ messages in thread
From: Marek Vasut @ 2015-05-18 19:04 UTC (permalink / raw)
To: u-boot
On Monday, May 18, 2015 at 08:52:59 PM, maitysanchayan at gmail.com wrote:
> Hello Marek,
Hi!
> On 15-05-18 19:09:58, Marek Vasut wrote:
> > On Monday, May 18, 2015 at 03:06:28 PM, Bhuvanchandra DV wrote:
> > > From: Sanchayan Maity <maitysanchayan@gmail.com>
> > >
> > > Add a weak function board_ehci_hcd_init which can be used by the board
> > > file for board specific initialisation.
> > >
> > > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
> >
> > Acked-by: Marek Vasut <marex@denx.de>
> >
> > What I do not like is that you're sending a patch series which affects
> > multiple subsystems and which contains patches which should go through
> > multiple trees. Yet, you submit it all in one huge series.
>
> If required I can send in the last two patches affecting the USB
> susbsystem later once the rest of the patchset gets merged, if this is
> not acceptable?.
>
> Since these last two were dependent on the GPIO patches I thought
> perhaps it is better that they go along with the GPIO patches as a
> coherent whole.
I think if there's no oposition, just push this all via u-boot-imx .
I don't plan to block it, but subsystem stuff should usually go though
subsystem trees.
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
` (10 preceding siblings ...)
2015-05-18 13:06 ` [U-Boot] [PATCH 11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio Bhuvanchandra DV
@ 2015-05-24 19:34 ` Bhuvanchandra DV
2015-05-26 11:27 ` Stefano Babic
2015-06-01 8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
12 siblings, 1 reply; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-05-24 19:34 UTC (permalink / raw)
To: u-boot
Hello Stefano,
On 05/18/2015 06:36 PM, Bhuvanchandra DV wrote:
> This patch-set adds GPIO driver, DSPI and device tree support
> for Freescale Vybrid platform and Toradex Colibri Vybrid VF50,
> VF61 modules.
>
> Following cases are tested with Vybrid GPIO driver:
> - with DM, without DT
> - with DM and DT
> Both the above cases were tested on Toradex Colibri Vybrid VF50, VF61
> modules and both works fine.
>
> - The patchset is based and tested on the latest master branch.
>
> Bhuvanchandra DV (9):
> dm: gpio: uclass: Add flag to control sequence numbering
> dm: gpio: vf610: Add GPIO driver support
> colibri_vf: Add pinmux entries for GPIOs
> colibri_vf: Enable GPIO support
> arm: vf610: Add clock support for DSPI
> arm: vf610: Add iomux support for DSPI
> vf610: dts: Add device tree support
> colibri-vf: Enable SPI support
> colibri_vf: Add separate defconfig for device tree support
>
> Sanchayan Maity (2):
> usb: ehci-vf: Add weak function for board specific initialisation
> colibri_vf: Enable board specific USB initialisation for USB pen gpio
Submitted these patches in single series, as few of the patches are
interdependent, thought it would be easy to keep them in same series.
Shall we split this patchset as per the custodian maintainers to pick?
Patchset 1: Add GPIO driver support for Freescale Vybrid platform,
enable support for GPIO support on Toradex Colibri VF50, VF61 modules.
Patchset 2: Add device tree support for Freescale Vybrid Platform,
Toradex Colibri VF50, VF61 modules.
Patchset 3: Add DSPI support for Toradex Colibri VF50, VF61 modules.
Patchset 4: Add weak function for board specific USB initialization
for Freescale Vybrid platform.
>
> arch/arm/cpu/armv7/vf610/generic.c | 7 ++
> arch/arm/dts/Makefile | 3 +
> arch/arm/dts/vf-colibri.dtsi | 21 ++++
> arch/arm/dts/vf.dtsi | 100 +++++++++++++++
> arch/arm/dts/vf500-colibri.dts | 18 +++
> arch/arm/dts/vf610-colibri.dts | 18 +++
> arch/arm/imx-common/iomux-v3.c | 26 ++++
> arch/arm/include/asm/arch-vf610/clock.h | 1 +
> arch/arm/include/asm/arch-vf610/crm_regs.h | 4 +
> arch/arm/include/asm/arch-vf610/gpio.h | 29 +++++
> arch/arm/include/asm/arch-vf610/imx-regs.h | 5 +
> arch/arm/include/asm/arch-vf610/iomux-vf610.h | 59 +++++++++
> arch/arm/include/asm/imx-common/iomux-v3.h | 6 +
> board/toradex/colibri_vf/colibri_vf.c | 106 ++++++++++++++++
> configs/colibri_vf_defconfig | 1 +
> configs/colibri_vf_dtb_defconfig | 6 +
> drivers/gpio/Kconfig | 7 ++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-uclass.c | 1 +
> drivers/gpio/vybrid_gpio.c | 169 ++++++++++++++++++++++++++
> drivers/usb/host/ehci-vf.c | 8 ++
> include/configs/colibri_vf.h | 16 +++
> 22 files changed, 612 insertions(+)
> create mode 100644 arch/arm/dts/vf-colibri.dtsi
> create mode 100644 arch/arm/dts/vf.dtsi
> create mode 100644 arch/arm/dts/vf500-colibri.dts
> create mode 100644 arch/arm/dts/vf610-colibri.dts
> create mode 100644 arch/arm/include/asm/arch-vf610/gpio.h
> create mode 100644 configs/colibri_vf_dtb_defconfig
> create mode 100644 drivers/gpio/vybrid_gpio.c
>
Best regards,
Bhuvan
^ permalink raw reply [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform
2015-05-24 19:34 ` [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
@ 2015-05-26 11:27 ` Stefano Babic
2015-06-01 5:34 ` Bhuvanchandra DV
0 siblings, 1 reply; 39+ messages in thread
From: Stefano Babic @ 2015-05-26 11:27 UTC (permalink / raw)
To: u-boot
Hi,
On 24/05/2015 21:34, Bhuvanchandra DV wrote:
> Hello Stefano,
>
> On 05/18/2015 06:36 PM, Bhuvanchandra DV wrote:
>> This patch-set adds GPIO driver, DSPI and device tree support
>> for Freescale Vybrid platform and Toradex Colibri Vybrid VF50,
>> VF61 modules.
>>
>> Following cases are tested with Vybrid GPIO driver:
>> - with DM, without DT
>> - with DM and DT
>> Both the above cases were tested on Toradex Colibri Vybrid VF50, VF61
>> modules and both works fine.
>>
>> - The patchset is based and tested on the latest master branch.
>>
>> Bhuvanchandra DV (9):
>> dm: gpio: uclass: Add flag to control sequence numbering
>> dm: gpio: vf610: Add GPIO driver support
>> colibri_vf: Add pinmux entries for GPIOs
>> colibri_vf: Enable GPIO support
>> arm: vf610: Add clock support for DSPI
>> arm: vf610: Add iomux support for DSPI
>> vf610: dts: Add device tree support
>> colibri-vf: Enable SPI support
>> colibri_vf: Add separate defconfig for device tree support
>>
>> Sanchayan Maity (2):
>> usb: ehci-vf: Add weak function for board specific initialisation
>> colibri_vf: Enable board specific USB initialisation for USB pen gpio
>
> Submitted these patches in single series, as few of the patches are
> interdependent, thought it would be easy to keep them in same series.
>
> Shall we split this patchset as per the custodian maintainers to pick?
>
> Patchset 1: Add GPIO driver support for Freescale Vybrid platform,
> enable support for GPIO support on Toradex Colibri VF50, VF61 modules.
>
> Patchset 2: Add device tree support for Freescale Vybrid Platform,
> Toradex Colibri VF50, VF61 modules.
>
> Patchset 3: Add DSPI support for Toradex Colibri VF50, VF61 modules.
>
> Patchset 4: Add weak function for board specific USB initialization
> for Freescale Vybrid platform.
Generally, if a maintainer acks a patch, the patch could then be applied
into another tree if this makes sense and avoid to introduce breakage,
maybe in both trees. You patchset is related to u-boot-imx with
exception for the USB part, but Marek has already acked it. I will check
you patches soon, but I think it is ok if the whole patchset flows into
u-boot-imx.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform
2015-05-26 11:27 ` Stefano Babic
@ 2015-06-01 5:34 ` Bhuvanchandra DV
2015-06-01 7:17 ` Stefano Babic
0 siblings, 1 reply; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 5:34 UTC (permalink / raw)
To: u-boot
Hello,
On 05/26/2015 04:57 PM, Stefano Babic wrote:
> Hi,
>
> On 24/05/2015 21:34, Bhuvanchandra DV wrote:
>> Hello Stefano,
>>
>> On 05/18/2015 06:36 PM, Bhuvanchandra DV wrote:
>>> This patch-set adds GPIO driver, DSPI and device tree support
>>> for Freescale Vybrid platform and Toradex Colibri Vybrid VF50,
>>> VF61 modules.
>>>
>>> Following cases are tested with Vybrid GPIO driver:
>>> - with DM, without DT
>>> - with DM and DT
>>> Both the above cases were tested on Toradex Colibri Vybrid VF50, VF61
>>> modules and both works fine.
>>>
>>> - The patchset is based and tested on the latest master branch.
>>>
>>> Bhuvanchandra DV (9):
>>> dm: gpio: uclass: Add flag to control sequence numbering
>>> dm: gpio: vf610: Add GPIO driver support
>>> colibri_vf: Add pinmux entries for GPIOs
>>> colibri_vf: Enable GPIO support
>>> arm: vf610: Add clock support for DSPI
>>> arm: vf610: Add iomux support for DSPI
>>> vf610: dts: Add device tree support
>>> colibri-vf: Enable SPI support
>>> colibri_vf: Add separate defconfig for device tree support
>>>
>>> Sanchayan Maity (2):
>>> usb: ehci-vf: Add weak function for board specific initialisation
>>> colibri_vf: Enable board specific USB initialisation for USB pen gpio
>>
>> Submitted these patches in single series, as few of the patches are
>> interdependent, thought it would be easy to keep them in same series.
>>
>> Shall we split this patchset as per the custodian maintainers to pick?
>>
>> Patchset 1: Add GPIO driver support for Freescale Vybrid platform,
>> enable support for GPIO support on Toradex Colibri VF50, VF61 modules.
>>
>> Patchset 2: Add device tree support for Freescale Vybrid Platform,
>> Toradex Colibri VF50, VF61 modules.
>>
>> Patchset 3: Add DSPI support for Toradex Colibri VF50, VF61 modules.
>>
>> Patchset 4: Add weak function for board specific USB initialization
>> for Freescale Vybrid platform.
>
> Generally, if a maintainer acks a patch, the patch could then be applied
> into another tree if this makes sense and avoid to introduce breakage,
> maybe in both trees. You patchset is related to u-boot-imx with
> exception for the USB part, but Marek has already acked it. I will check
> you patches soon, but I think it is ok if the whole patchset flows into
> u-boot-imx.
>
Ping!
> Best regards,
> Stefano Babic
>
Best regards,
Bhuvan
^ permalink raw reply [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform
2015-06-01 5:34 ` Bhuvanchandra DV
@ 2015-06-01 7:17 ` Stefano Babic
0 siblings, 0 replies; 39+ messages in thread
From: Stefano Babic @ 2015-06-01 7:17 UTC (permalink / raw)
To: u-boot
Hi,
On 01/06/2015 07:34, Bhuvanchandra DV wrote:
>> Generally, if a maintainer acks a patch, the patch could then be applied
>> into another tree if this makes sense and avoid to introduce breakage,
>> maybe in both trees. You patchset is related to u-boot-imx with
>> exception for the USB part, but Marek has already acked it. I will check
>> you patches soon, but I think it is ok if the whole patchset flows into
>> u-boot-imx.
>>
> Ping!
>
Ready for merge - patches will flow in today.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 09/11] colibri_vf: Add separate defconfig for device tree support
2015-05-18 13:06 ` [U-Boot] [PATCH 09/11] colibri_vf: Add separate defconfig for device tree support Bhuvanchandra DV
@ 2015-06-01 7:45 ` Stefano Babic
2015-06-01 8:07 ` Bhuvanchandra DV
0 siblings, 1 reply; 39+ messages in thread
From: Stefano Babic @ 2015-06-01 7:45 UTC (permalink / raw)
To: u-boot
Hi Bhuvanchandra,
On 18/05/2015 15:06, Bhuvanchandra DV wrote:
> Most of the drivers available for Vybrid are not yet converted
> to OF model to use device tree model, only few drivers
> like SPI and GPIO drivers use device trees.
> Add separate defconfig for who needs to use device tree model.
> Later this can be integrated to single defconfig.
>
> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
> ---
> configs/colibri_vf_dtb_defconfig | 6 ++++++
> 1 file changed, 6 insertions(+)
> create mode 100644 configs/colibri_vf_dtb_defconfig
>
> diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
> new file mode 100644
> index 0000000..28ff1e9
> --- /dev/null
> +++ b/configs/colibri_vf_dtb_defconfig
> @@ -0,0 +1,6 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_COLIBRI_VF=y
> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND"
> +CONFIG_DM=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
>
This patch is broken because NAND setup is missing and the board
colibri_vf_dtp is not built.
Indeed, it is fixed with:
diff --git a/configs/colibri_vf_dtb_defconfig
b/configs/colibri_vf_dtb_defconfig
index 28ff1e9..88ecbdc 100644
--- a/configs/colibri_vf_dtb_defconfig
+++ b/configs/colibri_vf_dtb_defconfig
@@ -4,3 +4,5 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_I
CONFIG_DM=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
+CONFIG_NAND_VF610_NFC=y
+CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
Please add these to your patch and resubmit, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH 09/11] colibri_vf: Add separate defconfig for device tree support
2015-06-01 7:45 ` Stefano Babic
@ 2015-06-01 8:07 ` Bhuvanchandra DV
0 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 8:07 UTC (permalink / raw)
To: u-boot
Hello Stefano,
On 06/01/2015 01:15 PM, Stefano Babic wrote:
> Hi Bhuvanchandra,
>
> On 18/05/2015 15:06, Bhuvanchandra DV wrote:
>> Most of the drivers available for Vybrid are not yet converted
>> to OF model to use device tree model, only few drivers
>> like SPI and GPIO drivers use device trees.
>> Add separate defconfig for who needs to use device tree model.
>> Later this can be integrated to single defconfig.
>>
>> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
>> ---
>> configs/colibri_vf_dtb_defconfig | 6 ++++++
>> 1 file changed, 6 insertions(+)
>> create mode 100644 configs/colibri_vf_dtb_defconfig
>>
>> diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
>> new file mode 100644
>> index 0000000..28ff1e9
>> --- /dev/null
>> +++ b/configs/colibri_vf_dtb_defconfig
>> @@ -0,0 +1,6 @@
>> +CONFIG_ARM=y
>> +CONFIG_TARGET_COLIBRI_VF=y
>> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND"
>> +CONFIG_DM=y
>> +CONFIG_OF_CONTROL=y
>> +CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
>>
>
> This patch is broken because NAND setup is missing and the board
> colibri_vf_dtp is not built.
>
> Indeed, it is fixed with:
>
> diff --git a/configs/colibri_vf_dtb_defconfig
> b/configs/colibri_vf_dtb_defconfig
> index 28ff1e9..88ecbdc 100644
> --- a/configs/colibri_vf_dtb_defconfig
> +++ b/configs/colibri_vf_dtb_defconfig
> @@ -4,3 +4,5 @@
> CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_I
> CONFIG_DM=y
> CONFIG_OF_CONTROL=y
> CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
> +CONFIG_NAND_VF610_NFC=y
> +CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
>
>
> Please add these to your patch and resubmit, thanks !
Will add this and resubmit the patchset.
>
> Best regards,
> Stefano Babic
>
Best regards,
Bhuvan
^ permalink raw reply [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 00/11] Add GPIO driver for Freescale Vybrid platform
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
` (11 preceding siblings ...)
2015-05-24 19:34 ` [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
@ 2015-06-01 8:51 ` Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 01/11] dm: gpio: uclass: Add flag to control sequence numbering Bhuvanchandra DV
` (10 more replies)
12 siblings, 11 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 8:51 UTC (permalink / raw)
To: u-boot
Changes since V1:
Fix the broken patches
Bhuvanchandra DV (9):
dm: gpio: uclass: Add flag to control sequence numbering
dm: gpio: vf610: Add GPIO driver support
colibri_vf: Add pinmux entries for GPIOs
colibri_vf: Enable GPIO support
arm: vf610: Add clock support for DSPI
arm: vf610: Add iomux support for DSPI
vf610: dts: Add device tree support
colibri-vf: Enable SPI support
colibri_vf: Add separate defconfig for device tree support
Sanchayan Maity (2):
usb: ehci-vf: Add weak function for board specific initialisation
colibri_vf: Enable board specific USB initialisation for USB pen gpio
arch/arm/cpu/armv7/vf610/generic.c | 7 ++
arch/arm/dts/Makefile | 3 +
arch/arm/dts/vf-colibri.dtsi | 21 ++++
arch/arm/dts/vf.dtsi | 100 +++++++++++++++
arch/arm/dts/vf500-colibri.dts | 18 +++
arch/arm/dts/vf610-colibri.dts | 18 +++
arch/arm/imx-common/iomux-v3.c | 26 ++++
arch/arm/include/asm/arch-vf610/clock.h | 1 +
arch/arm/include/asm/arch-vf610/crm_regs.h | 4 +
arch/arm/include/asm/arch-vf610/gpio.h | 29 +++++
arch/arm/include/asm/arch-vf610/imx-regs.h | 5 +
arch/arm/include/asm/arch-vf610/iomux-vf610.h | 59 +++++++++
arch/arm/include/asm/imx-common/iomux-v3.h | 6 +
board/toradex/colibri_vf/colibri_vf.c | 106 ++++++++++++++++
configs/colibri_vf_defconfig | 1 +
configs/colibri_vf_dtb_defconfig | 8 ++
drivers/gpio/Kconfig | 7 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-uclass.c | 1 +
drivers/gpio/vybrid_gpio.c | 169 ++++++++++++++++++++++++++
drivers/usb/host/ehci-vf.c | 8 ++
include/configs/colibri_vf.h | 16 +++
22 files changed, 614 insertions(+)
create mode 100644 arch/arm/dts/vf-colibri.dtsi
create mode 100644 arch/arm/dts/vf.dtsi
create mode 100644 arch/arm/dts/vf500-colibri.dts
create mode 100644 arch/arm/dts/vf610-colibri.dts
create mode 100644 arch/arm/include/asm/arch-vf610/gpio.h
create mode 100644 configs/colibri_vf_dtb_defconfig
create mode 100644 drivers/gpio/vybrid_gpio.c
--
2.1.0
^ permalink raw reply [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 01/11] dm: gpio: uclass: Add flag to control sequence numbering
2015-06-01 8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
@ 2015-06-01 8:51 ` Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 02/11] dm: gpio: vf610: Add GPIO driver support Bhuvanchandra DV
` (9 subsequent siblings)
10 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 8:51 UTC (permalink / raw)
To: u-boot
Like SPI and I2C few GPIO controllers also have
multiple chip instances. This patch adds the
flag 'DM_UC_FLAG_SEQ_ALIAS' in gpio_uclass driver
to control device sequence numbering. By defalut
the dev->r_seq for gpio_uclass will alwalys
returns -1, which leads the gpio driver probe
failure when using the driver with device trees.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
drivers/gpio/gpio-uclass.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c
index 530bb3e..bf982b9 100644
--- a/drivers/gpio/gpio-uclass.c
+++ b/drivers/gpio/gpio-uclass.c
@@ -757,6 +757,7 @@ static int gpio_pre_remove(struct udevice *dev)
UCLASS_DRIVER(gpio) = {
.id = UCLASS_GPIO,
.name = "gpio",
+ .flags = DM_UC_FLAG_SEQ_ALIAS,
.post_probe = gpio_post_probe,
.pre_remove = gpio_pre_remove,
.per_device_auto_alloc_size = sizeof(struct gpio_dev_priv),
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 02/11] dm: gpio: vf610: Add GPIO driver support
2015-06-01 8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 01/11] dm: gpio: uclass: Add flag to control sequence numbering Bhuvanchandra DV
@ 2015-06-01 8:51 ` Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 03/11] colibri_vf: Add pinmux entries for GPIOs Bhuvanchandra DV
` (8 subsequent siblings)
10 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 8:51 UTC (permalink / raw)
To: u-boot
Add GPIO driver support to Freescale VF610
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
arch/arm/imx-common/iomux-v3.c | 26 +++++
arch/arm/include/asm/arch-vf610/gpio.h | 29 +++++
arch/arm/include/asm/arch-vf610/imx-regs.h | 5 +
arch/arm/include/asm/imx-common/iomux-v3.h | 6 +
drivers/gpio/Kconfig | 7 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/vybrid_gpio.c | 169 +++++++++++++++++++++++++++++
7 files changed, 243 insertions(+)
create mode 100644 arch/arm/include/asm/arch-vf610/gpio.h
create mode 100644 drivers/gpio/vybrid_gpio.c
diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index e88e6e2..7fb23dd 100644
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -92,3 +92,29 @@ void imx_iomux_set_gpr_register(int group, int start_bit,
reg |= (value << start_bit);
writel(reg, base + group * 4);
}
+
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+void imx_iomux_gpio_set_direction(unsigned int gpio,
+ unsigned int direction)
+{
+ u32 reg;
+ /*
+ * Only on Vybrid the input/output buffer enable flags
+ * are part of the shared mux/conf register.
+ */
+ reg = readl(base + (gpio << 2));
+
+ if (direction)
+ reg |= 0x2;
+ else
+ reg &= ~0x2;
+
+ writel(reg, base + (gpio << 2));
+}
+
+void imx_iomux_gpio_get_function(unsigned int gpio, u32 *gpio_state)
+{
+ *gpio_state = readl(base + (gpio << 2)) &
+ ((0X07 << PAD_MUX_MODE_SHIFT) | PAD_CTL_OBE_IBE_ENABLE);
+}
+#endif
diff --git a/arch/arm/include/asm/arch-vf610/gpio.h b/arch/arm/include/asm/arch-vf610/gpio.h
new file mode 100644
index 0000000..622b8f0
--- /dev/null
+++ b/arch/arm/include/asm/arch-vf610/gpio.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2015
+ * Bhuvanchandra DV, Toradex, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __ASM_ARCH_VF610_GPIO_H
+#define __ASM_ARCH_VF610_GPIO_H
+
+#define VYBRID_GPIO_COUNT 32
+#define VF610_GPIO_DIRECTION_IN 0x0
+#define VF610_GPIO_DIRECTION_OUT 0x1
+
+/* GPIO registers */
+struct vybrid_gpio_regs {
+ u32 gpio_pdor;
+ u32 gpio_psor;
+ u32 gpio_pcor;
+ u32 gpio_ptor;
+ u32 gpio_pdir;
+};
+
+struct vybrid_gpio_platdata {
+ unsigned int chip;
+ u32 base;
+ const char *port_name;
+};
+#endif /* __ASM_ARCH_VF610_GPIO_H */
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index 2021981..7df3b1e 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -81,6 +81,11 @@
#define VREG_DIG_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006D000)
#define SRC_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006E000)
#define CMU_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006F000)
+#define GPIO0_BASE_ADDR (AIPS0_BASE_ADDR + 0x000FF000)
+#define GPIO1_BASE_ADDR (AIPS0_BASE_ADDR + 0x000FF040)
+#define GPIO2_BASE_ADDR (AIPS0_BASE_ADDR + 0x000FF080)
+#define GPIO3_BASE_ADDR (AIPS0_BASE_ADDR + 0x000FF0C0)
+#define GPIO4_BASE_ADDR (AIPS0_BASE_ADDR + 0x000FF100)
/* AIPS 1 */
#define OCOTP_BASE_ADDR (AIPS1_BASE_ADDR + 0x00025000)
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index e0a49be..2581019 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -187,6 +187,12 @@ void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
*/
void imx_iomux_set_gpr_register(int group, int start_bit,
int num_bits, int value);
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+void imx_iomux_gpio_set_direction(unsigned int gpio,
+ unsigned int direction);
+void imx_iomux_gpio_get_function(unsigned int gpio,
+ u32 *gpio_state);
+#endif
/* macros for declaring and using pinmux array */
#if defined(CONFIG_MX6QDL)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 0840a30..0c43777 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -35,3 +35,10 @@ config SANDBOX_GPIO_COUNT
are specified using the device tree. But you can also have a number
of 'anonymous' GPIOs that do not belong to any device or bank.
Select a suitable value depending on your needs.
+
+config VYBRID_GPIO
+ bool "Vybrid GPIO driver"
+ depends on DM
+ default n
+ help
+ Say yes here to support Vybrid vf610 GPIOs.
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ba9efe8..5864850 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -45,3 +45,4 @@ obj-$(CONFIG_SUNXI_GPIO) += sunxi_gpio.o
obj-$(CONFIG_LPC32XX_GPIO) += lpc32xx_gpio.o
obj-$(CONFIG_STM32_GPIO) += stm32_gpio.o
obj-$(CONFIG_ZYNQ_GPIO) += zynq_gpio.o
+obj-$(CONFIG_VYBRID_GPIO) += vybrid_gpio.o
diff --git a/drivers/gpio/vybrid_gpio.c b/drivers/gpio/vybrid_gpio.c
new file mode 100644
index 0000000..6eaf0a9
--- /dev/null
+++ b/drivers/gpio/vybrid_gpio.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 2015
+ * Bhuvanchandra DV, Toradex, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/io.h>
+#include <malloc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct vybrid_gpios {
+ unsigned int chip;
+ struct vybrid_gpio_regs *reg;
+};
+
+static int vybrid_gpio_direction_input(struct udevice *dev, unsigned gpio)
+{
+ const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
+ gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
+ imx_iomux_gpio_set_direction(gpio, VF610_GPIO_DIRECTION_IN);
+
+ return 0;
+}
+
+static int vybrid_gpio_direction_output(struct udevice *dev, unsigned gpio,
+ int value)
+{
+ const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
+ gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
+ gpio_set_value(gpio, value);
+ imx_iomux_gpio_set_direction(gpio, VF610_GPIO_DIRECTION_OUT);
+
+ return 0;
+}
+
+static int vybrid_gpio_get_value(struct udevice *dev, unsigned gpio)
+{
+ const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
+ return ((readl(&gpios->reg->gpio_pdir) & (1 << gpio))) ? 1 : 0;
+}
+
+static int vybrid_gpio_set_value(struct udevice *dev, unsigned gpio,
+ int value)
+{
+ const struct vybrid_gpios *gpios = dev_get_priv(dev);
+ if (value)
+ writel((1 << gpio), &gpios->reg->gpio_psor);
+ else
+ writel((1 << gpio), &gpios->reg->gpio_pcor);
+
+ return 0;
+}
+
+static int vybrid_gpio_get_function(struct udevice *dev, unsigned gpio)
+{
+ const struct vybrid_gpios *gpios = dev_get_priv(dev);
+ u32 g_state = 0;
+
+ gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
+
+ imx_iomux_gpio_get_function(gpio, &g_state);
+
+ if (((g_state & (0x07 << PAD_MUX_MODE_SHIFT)) >> PAD_MUX_MODE_SHIFT) > 0)
+ return GPIOF_FUNC;
+ if (g_state & PAD_CTL_OBE_ENABLE)
+ return GPIOF_OUTPUT;
+ if (g_state & PAD_CTL_IBE_ENABLE)
+ return GPIOF_INPUT;
+ if (!(g_state & PAD_CTL_OBE_IBE_ENABLE))
+ return GPIOF_UNUSED;
+
+ return GPIOF_UNKNOWN;
+}
+
+static const struct dm_gpio_ops gpio_vybrid_ops = {
+ .direction_input = vybrid_gpio_direction_input,
+ .direction_output = vybrid_gpio_direction_output,
+ .get_value = vybrid_gpio_get_value,
+ .set_value = vybrid_gpio_set_value,
+ .get_function = vybrid_gpio_get_function,
+};
+
+static int vybrid_gpio_probe(struct udevice *dev)
+{
+ struct vybrid_gpios *gpios = dev_get_priv(dev);
+ struct vybrid_gpio_platdata *plat = dev_get_platdata(dev);
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ uc_priv->bank_name = plat->port_name;
+ uc_priv->gpio_count = VYBRID_GPIO_COUNT;
+ gpios->reg = (struct vybrid_gpio_regs *)plat->base;
+ gpios->chip = plat->chip;
+
+ return 0;
+}
+
+static int vybrid_gpio_bind(struct udevice *dev)
+{
+ struct vybrid_gpio_platdata *plat = dev->platdata;
+ fdt_addr_t base_addr;
+
+ if (plat)
+ return 0;
+
+ base_addr = dev_get_addr(dev);
+ if (base_addr == FDT_ADDR_T_NONE)
+ return -ENODEV;
+
+ /*
+ * TODO:
+ * When every board is converted to driver model and DT is
+ * supported, this can be done by auto-alloc feature, but
+ * not using calloc to alloc memory for platdata.
+ */
+ plat = calloc(1, sizeof(*plat));
+ if (!plat)
+ return -ENOMEM;
+
+ plat->base = base_addr;
+ plat->chip = dev->req_seq;
+ plat->port_name = fdt_get_name(gd->fdt_blob, dev->of_offset, NULL);
+ dev->platdata = plat;
+
+ return 0;
+}
+
+#ifndef CONFIG_OF_CONTROL
+static const struct vybrid_gpio_platdata vybrid_gpio[] = {
+ {0, GPIO0_BASE_ADDR, "GPIO0 "},
+ {1, GPIO1_BASE_ADDR, "GPIO1 "},
+ {2, GPIO2_BASE_ADDR, "GPIO2 "},
+ {3, GPIO3_BASE_ADDR, "GPIO3 "},
+ {4, GPIO4_BASE_ADDR, "GPIO4 "},
+};
+
+U_BOOT_DEVICES(vybrid_gpio) = {
+ { "gpio_vybrid", &vybrid_gpio[0] },
+ { "gpio_vybrid", &vybrid_gpio[1] },
+ { "gpio_vybrid", &vybrid_gpio[2] },
+ { "gpio_vybrid", &vybrid_gpio[3] },
+ { "gpio_vybrid", &vybrid_gpio[4] },
+};
+#endif
+
+static const struct udevice_id vybrid_gpio_ids[] = {
+ { .compatible = "fsl,vf610-gpio" },
+ { }
+};
+
+U_BOOT_DRIVER(gpio_vybrid) = {
+ .name = "gpio_vybrid",
+ .id = UCLASS_GPIO,
+ .ops = &gpio_vybrid_ops,
+ .probe = vybrid_gpio_probe,
+ .priv_auto_alloc_size = sizeof(struct vybrid_gpios),
+ .of_match = vybrid_gpio_ids,
+ .bind = vybrid_gpio_bind,
+};
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 03/11] colibri_vf: Add pinmux entries for GPIOs
2015-06-01 8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 01/11] dm: gpio: uclass: Add flag to control sequence numbering Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 02/11] dm: gpio: vf610: Add GPIO driver support Bhuvanchandra DV
@ 2015-06-01 8:51 ` Bhuvanchandra DV
2015-06-01 10:26 ` Stefan Agner
2015-06-01 8:51 ` [U-Boot] [PATCH V2 04/11] colibri_vf: Enable GPIO support Bhuvanchandra DV
` (7 subsequent siblings)
10 siblings, 1 reply; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 8:51 UTC (permalink / raw)
To: u-boot
Inorder to use the pins as GPIO, apart from setting the alt-function,
pinmuxing need to be done, this patch adds pinmux entries of
few GPIOs.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
arch/arm/include/asm/arch-vf610/iomux-vf610.h | 49 ++++++++++++++++++++++
board/toradex/colibri_vf/colibri_vf.c | 60 +++++++++++++++++++++++++++
2 files changed, 109 insertions(+)
diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
index 9226e69..e22e3f9 100644
--- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -32,22 +32,56 @@
#define VF610_QSPI_PAD_CTRL (PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_150ohm | \
PAD_CTL_PUS_22K_UP | PAD_CTL_OBE_IBE_ENABLE)
+#define VF610_GPIO_PAD_CTRL (PAD_CTL_SPEED_MED | PAD_CTL_DSE_50ohm | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_IBE_ENABLE)
+
enum {
VF610_PAD_PTA6__RMII0_CLKIN = IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTA6__RMII0_CLKOUT = IOMUX_PAD(0x0000, 0x0000, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTA7__GPIO_134 = IOMUX_PAD(0x0218, 0x0218, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTA17__GPIO_7 = IOMUX_PAD(0x001c, 0x001c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTA20__GPIO_10 = IOMUX_PAD(0x0028, 0x0028, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTA21__GPIO_11 = IOMUX_PAD(0x002c, 0x002c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTA30__GPIO_20 = IOMUX_PAD(0x0050, 0x0050, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTA31__GPIO_21 = IOMUX_PAD(0x0054, 0x0054, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB0__GPIO_22 = IOMUX_PAD(0x0058, 0x0058, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB1__GPIO_23 = IOMUX_PAD(0x005C, 0x005C, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTB4__UART1_TX = IOMUX_PAD(0x0068, 0x0068, 2, 0x0380, 0, VF610_UART_PAD_CTRL),
VF610_PAD_PTB5__UART1_RX = IOMUX_PAD(0x006c, 0x006c, 2, 0x037c, 0, VF610_UART_PAD_CTRL),
+ VF610_PAD_PTB6__GPIO_28 = IOMUX_PAD(0x0070, 0x0070, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB7__GPIO_29 = IOMUX_PAD(0x0074, 0x0074, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB8__GPIO_30 = IOMUX_PAD(0x0078, 0x0078, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB9__GPIO_31 = IOMUX_PAD(0x007C, 0x007C, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTB10__UART0_TX = IOMUX_PAD(0x0080, 0x0080, 1, __NA_, 0, VF610_UART_PAD_CTRL),
VF610_PAD_PTB11__UART0_RX = IOMUX_PAD(0x0084, 0x0084, 1, __NA_, 0, VF610_UART_PAD_CTRL),
+ VF610_PAD_PTB12__GPIO_34 = IOMUX_PAD(0x0088, 0x0088, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB13__GPIO_35 = IOMUX_PAD(0x008c, 0x008c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB16__GPIO_38 = IOMUX_PAD(0x0098, 0x0098, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB17__GPIO_39 = IOMUX_PAD(0x009c, 0x009c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB18__GPIO_40 = IOMUX_PAD(0x00a0, 0x00a0, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB21__GPIO_43 = IOMUX_PAD(0x00ac, 0x00ac, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB22__GPIO_44 = IOMUX_PAD(0x00b0, 0x00b0, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB23__GPIO_93 = IOMUX_PAD(0x0174, 0x0174, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB26__GPIO_96 = IOMUX_PAD(0x0180, 0x0180, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTB28__GPIO_98 = IOMUX_PAD(0x0188, 0x0188, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTC1__GPIO_46 = IOMUX_PAD(0x00b8, 0x00b8, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC1__RMII0_MDIO = IOMUX_PAD(0x00b8, 0x00b8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC0__GPIO_45 = IOMUX_PAD(0x00b4, 0x00b4, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC0__RMII0_MDC = IOMUX_PAD(0x00b4, 0x00b4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTC2__RMII0_CRS_DV = IOMUX_PAD(0x00bc, 0x00bc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC2__GPIO_47 = IOMUX_PAD(0x00bc, 0x00bc, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC3__RMII0_RD1 = IOMUX_PAD(0x00c0, 0x00c0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC3__GPIO_48 = IOMUX_PAD(0x00c0, 0x00c0, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC4__RMII0_RD0 = IOMUX_PAD(0x00c4, 0x00c4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC4__GPIO_49 = IOMUX_PAD(0x00c4, 0x00c4, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC5__RMII0_RXER = IOMUX_PAD(0x00c8, 0x00c8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC5__GPIO_50 = IOMUX_PAD(0x00c8, 0x00c8, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC6__RMII0_TD1 = IOMUX_PAD(0x00cc, 0x00cc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC6__GPIO_51 = IOMUX_PAD(0x00cc, 0x00cc, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC7__RMII0_TD0 = IOMUX_PAD(0x00D0, 0x00D0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC7__GPIO_52 = IOMUX_PAD(0x00D0, 0x00D0, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC8__RMII0_TXEN = IOMUX_PAD(0x00D4, 0x00D4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC8__GPIO_53 = IOMUX_PAD(0x00D4, 0x00D4, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC10__RMII1_MDIO = IOMUX_PAD(0x00dc, 0x00dc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTC9__RMII1_MDC = IOMUX_PAD(0x00d8, 0x00d8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTC11__RMII1_CRS_DV = IOMUX_PAD(0x00e0, 0x00e0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
@@ -57,6 +91,8 @@ enum {
VF610_PAD_PTC15__RMII1_TD1 = IOMUX_PAD(0x00f0, 0x00f0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTC16__RMII1_TD0 = IOMUX_PAD(0x00f4, 0x00f4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTC17__RMII1_TXEN = IOMUX_PAD(0x00f8, 0x00f8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTC29__GPIO_102 = IOMUX_PAD(0x0198, 0x0198, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTC30__GPIO_103 = IOMUX_PAD(0x019c, 0x019c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTA24__ESDHC1_CLK = IOMUX_PAD(0x0038, 0x0038, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
VF610_PAD_PTA25__ESDHC1_CMD = IOMUX_PAD(0x003c, 0x003c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
VF610_PAD_PTA26__ESDHC1_DAT0 = IOMUX_PAD(0x0040, 0x0040, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
@@ -66,13 +102,21 @@ enum {
VF610_PAD_PTB14__I2C0_SCL = IOMUX_PAD(0x0090, 0x0090, 2, 0x033c, 1, VF610_I2C_PAD_CTRL),
VF610_PAD_PTB15__I2C0_SDA = IOMUX_PAD(0x0094, 0x0094, 2, 0x0340, 1, VF610_I2C_PAD_CTRL),
VF610_PAD_PTD31__NF_IO15 = IOMUX_PAD(0x00fc, 0x00fc, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD31__GPIO_63 = IOMUX_PAD(0x00fc, 0x00fc, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD30__NF_IO14 = IOMUX_PAD(0x0100, 0x0100, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD30__GPIO_64 = IOMUX_PAD(0x0100, 0x0100, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD29__NF_IO13 = IOMUX_PAD(0x0104, 0x0104, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD29__GPIO_65 = IOMUX_PAD(0x0104, 0x0104, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD28__NF_IO12 = IOMUX_PAD(0x0108, 0x0108, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD28__GPIO_66 = IOMUX_PAD(0x0108, 0x0108, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD27__NF_IO11 = IOMUX_PAD(0x010c, 0x010c, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD27__GPIO_67 = IOMUX_PAD(0x010c, 0x010c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD26__NF_IO10 = IOMUX_PAD(0x0110, 0x0110, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD26__GPIO_68 = IOMUX_PAD(0x0110, 0x0110, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD25__NF_IO9 = IOMUX_PAD(0x0114, 0x0114, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD25__GPIO_69 = IOMUX_PAD(0x0114, 0x0114, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD24__NF_IO8 = IOMUX_PAD(0x0118, 0x0118, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
+ VF610_PAD_PTD24__GPIO_70 = IOMUX_PAD(0x0118, 0x0118, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD23__NF_IO7 = IOMUX_PAD(0x011c, 0x011c, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
VF610_PAD_PTD0__QSPI0_A_QSCK = IOMUX_PAD(0x013c, 0x013c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
VF610_PAD_PTD1__QSPI0_A_CS0 = IOMUX_PAD(0x0140, 0x0140, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
@@ -83,9 +127,14 @@ enum {
VF610_PAD_PTD7__QSPI0_B_QSCK = IOMUX_PAD(0x0158, 0x0158, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
VF610_PAD_PTD8__QSPI0_B_CS0 = IOMUX_PAD(0x015c, 0x015c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
VF610_PAD_PTD9__QSPI0_B_DATA3 = IOMUX_PAD(0x0160, 0x0160, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+ VF610_PAD_PTD9__GPIO_88 = IOMUX_PAD(0x0160, 0x0160, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD10__QSPI0_B_DATA2 = IOMUX_PAD(0x0164, 0x0164, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+ VF610_PAD_PTD10__GPIO_89 = IOMUX_PAD(0x0164, 0x0164, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD11__QSPI0_B_DATA1 = IOMUX_PAD(0x0168, 0x0168, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+ VF610_PAD_PTD11__GPIO_90 = IOMUX_PAD(0x0168, 0x0168, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD12__QSPI0_B_DATA0 = IOMUX_PAD(0x016c, 0x016c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+ VF610_PAD_PTD12__GPIO_91 = IOMUX_PAD(0x016c, 0x016c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+ VF610_PAD_PTD13__GPIO_92 = IOMUX_PAD(0x0170, 0x0170, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD22__NF_IO6 = IOMUX_PAD(0x0120, 0x0120, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
VF610_PAD_PTD21__NF_IO5 = IOMUX_PAD(0x0124, 0x0124, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
VF610_PAD_PTD20__NF_IO4 = IOMUX_PAD(0x0128, 0x0128, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index 31ebb19..e354c6d 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -146,6 +146,62 @@ static void setup_iomux_nfc(void)
}
#endif
+#ifdef CONFIG_VYBRID_GPIO
+static void setup_iomux_gpio(void)
+{
+ static const iomux_v3_cfg_t gpio_pads[] = {
+ VF610_PAD_PTA17__GPIO_7,
+ VF610_PAD_PTA20__GPIO_10,
+ VF610_PAD_PTA21__GPIO_11,
+ VF610_PAD_PTA30__GPIO_20,
+ VF610_PAD_PTA31__GPIO_21,
+ VF610_PAD_PTB0__GPIO_22,
+ VF610_PAD_PTB1__GPIO_23,
+ VF610_PAD_PTB6__GPIO_28,
+ VF610_PAD_PTB7__GPIO_29,
+ VF610_PAD_PTB8__GPIO_30,
+ VF610_PAD_PTB9__GPIO_31,
+ VF610_PAD_PTB12__GPIO_34,
+ VF610_PAD_PTB13__GPIO_35,
+ VF610_PAD_PTB16__GPIO_38,
+ VF610_PAD_PTB17__GPIO_39,
+ VF610_PAD_PTB18__GPIO_40,
+ VF610_PAD_PTB21__GPIO_43,
+ VF610_PAD_PTB22__GPIO_44,
+ VF610_PAD_PTC0__GPIO_45,
+ VF610_PAD_PTC1__GPIO_46,
+ VF610_PAD_PTC2__GPIO_47,
+ VF610_PAD_PTC3__GPIO_48,
+ VF610_PAD_PTC4__GPIO_49,
+ VF610_PAD_PTC5__GPIO_50,
+ VF610_PAD_PTC6__GPIO_51,
+ VF610_PAD_PTC7__GPIO_52,
+ VF610_PAD_PTC8__GPIO_53,
+ VF610_PAD_PTD31__GPIO_63,
+ VF610_PAD_PTD30__GPIO_64,
+ VF610_PAD_PTD29__GPIO_65,
+ VF610_PAD_PTD28__GPIO_66,
+ VF610_PAD_PTD27__GPIO_67,
+ VF610_PAD_PTD26__GPIO_68,
+ VF610_PAD_PTD25__GPIO_69,
+ VF610_PAD_PTD24__GPIO_70,
+ VF610_PAD_PTD9__GPIO_88,
+ VF610_PAD_PTD10__GPIO_89,
+ VF610_PAD_PTD11__GPIO_90,
+ VF610_PAD_PTD12__GPIO_91,
+ VF610_PAD_PTD13__GPIO_92,
+ VF610_PAD_PTB23__GPIO_93,
+ VF610_PAD_PTB26__GPIO_96,
+ VF610_PAD_PTB28__GPIO_98,
+ VF610_PAD_PTC29__GPIO_102,
+ VF610_PAD_PTC30__GPIO_103,
+ VF610_PAD_PTA7__GPIO_134,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
+}
+#endif
+
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg esdhc_cfg[1] = {
{ESDHC1_BASE_ADDR},
@@ -304,6 +360,10 @@ int board_early_init_f(void)
setup_iomux_nfc();
#endif
+#ifdef CONFIG_VYBRID_GPIO
+ setup_iomux_gpio();
+#endif
+
return 0;
}
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 04/11] colibri_vf: Enable GPIO support
2015-06-01 8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
` (2 preceding siblings ...)
2015-06-01 8:51 ` [U-Boot] [PATCH V2 03/11] colibri_vf: Add pinmux entries for GPIOs Bhuvanchandra DV
@ 2015-06-01 8:51 ` Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 05/11] arm: vf610: Add clock support for DSPI Bhuvanchandra DV
` (6 subsequent siblings)
10 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 8:51 UTC (permalink / raw)
To: u-boot
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
configs/colibri_vf_defconfig | 1 +
include/configs/colibri_vf.h | 5 +++++
2 files changed, 6 insertions(+)
diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index 3b1f66a..0715267 100644
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -3,3 +3,4 @@ CONFIG_TARGET_COLIBRI_VF=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND"
CONFIG_NAND_VF610_NFC=y
CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
+CONFIG_DM=y
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 804291d..195102b 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -54,6 +54,11 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
+/* GPIO support */
+#define CONFIG_DM_GPIO
+#define CONFIG_CMD_GPIO
+#define CONFIG_VYBRID_GPIO
+
/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
#define CONFIG_MTD_PARTITIONS
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 05/11] arm: vf610: Add clock support for DSPI
2015-06-01 8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
` (3 preceding siblings ...)
2015-06-01 8:51 ` [U-Boot] [PATCH V2 04/11] colibri_vf: Enable GPIO support Bhuvanchandra DV
@ 2015-06-01 8:51 ` Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 06/11] arm: vf610: Add iomux " Bhuvanchandra DV
` (5 subsequent siblings)
10 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 8:51 UTC (permalink / raw)
To: u-boot
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
arch/arm/cpu/armv7/vf610/generic.c | 7 +++++++
arch/arm/include/asm/arch-vf610/clock.h | 1 +
arch/arm/include/asm/arch-vf610/crm_regs.h | 4 ++++
3 files changed, 12 insertions(+)
diff --git a/arch/arm/cpu/armv7/vf610/generic.c b/arch/arm/cpu/armv7/vf610/generic.c
index 1bb9b8e..05c401d 100644
--- a/arch/arm/cpu/armv7/vf610/generic.c
+++ b/arch/arm/cpu/armv7/vf610/generic.c
@@ -198,6 +198,11 @@ static u32 get_i2c_clk(void)
return get_ipg_clk();
}
+static u32 get_dspi_clk(void)
+{
+ return get_ipg_clk();
+}
+
unsigned int mxc_get_clock(enum mxc_clock clk)
{
switch (clk) {
@@ -215,6 +220,8 @@ unsigned int mxc_get_clock(enum mxc_clock clk)
return get_fec_clk();
case MXC_I2C_CLK:
return get_i2c_clk();
+ case MXC_DSPI_CLK:
+ return get_dspi_clk();
default:
break;
}
diff --git a/arch/arm/include/asm/arch-vf610/clock.h b/arch/arm/include/asm/arch-vf610/clock.h
index 535adad..e5a5c6d 100644
--- a/arch/arm/include/asm/arch-vf610/clock.h
+++ b/arch/arm/include/asm/arch-vf610/clock.h
@@ -17,6 +17,7 @@ enum mxc_clock {
MXC_ESDHC_CLK,
MXC_FEC_CLK,
MXC_I2C_CLK,
+ MXC_DSPI_CLK,
};
void enable_ocotp_clk(unsigned char enable);
diff --git a/arch/arm/include/asm/arch-vf610/crm_regs.h b/arch/arm/include/asm/arch-vf610/crm_regs.h
index bc6db2a..fdb45e9 100644
--- a/arch/arm/include/asm/arch-vf610/crm_regs.h
+++ b/arch/arm/include/asm/arch-vf610/crm_regs.h
@@ -189,6 +189,8 @@ struct anadig_reg {
#define CCM_REG_CTRL_MASK 0xffffffff
#define CCM_CCGR0_UART0_CTRL_MASK (0x3 << 14)
#define CCM_CCGR0_UART1_CTRL_MASK (0x3 << 16)
+#define CCM_CCGR0_DSPI0_CTRL_MASK (0x3 << 24)
+#define CCM_CCGR0_DSPI1_CTRL_MASK (0x3 << 26)
#define CCM_CCGR1_USBC0_CTRL_MASK (0x3 << 8)
#define CCM_CCGR1_PIT_CTRL_MASK (0x3 << 14)
#define CCM_CCGR1_WDOGA5_CTRL_MASK (0x3 << 28)
@@ -206,6 +208,8 @@ struct anadig_reg {
#define CCM_CCGR4_GPC_CTRL_MASK (0x3 << 24)
#define CCM_CCGR4_I2C0_CTRL_MASK (0x3 << 12)
#define CCM_CCGR6_OCOTP_CTRL_MASK (0x3 << 10)
+#define CCM_CCGR6_DSPI2_CTRL_MASK (0x3 << 24)
+#define CCM_CCGR6_DSPI3_CTRL_MASK (0x3 << 26)
#define CCM_CCGR6_DDRMC_CTRL_MASK (0x3 << 28)
#define CCM_CCGR7_SDHC1_CTRL_MASK (0x3 << 4)
#define CCM_CCGR7_USBC1_CTRL_MASK (0x3 << 8)
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 06/11] arm: vf610: Add iomux support for DSPI
2015-06-01 8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
` (4 preceding siblings ...)
2015-06-01 8:51 ` [U-Boot] [PATCH V2 05/11] arm: vf610: Add clock support for DSPI Bhuvanchandra DV
@ 2015-06-01 8:51 ` Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 07/11] vf610: dts: Add device tree support Bhuvanchandra DV
` (4 subsequent siblings)
10 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 8:51 UTC (permalink / raw)
To: u-boot
Add iomux definitions for DSPI second instance.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
arch/arm/include/asm/arch-vf610/iomux-vf610.h | 9 +++++++++
board/toradex/colibri_vf/colibri_vf.c | 21 +++++++++++++++++++++
2 files changed, 30 insertions(+)
diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
index e22e3f9..b8b22b1 100644
--- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -35,6 +35,11 @@
#define VF610_GPIO_PAD_CTRL (PAD_CTL_SPEED_MED | PAD_CTL_DSE_50ohm | \
PAD_CTL_PUS_47K_UP | PAD_CTL_IBE_ENABLE)
+#define VF610_DSPI_PAD_CTRL (PAD_CTL_OBE_ENABLE | PAD_CTL_DSE_20ohm | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH)
+#define VF610_DSPI_SIN_PAD_CTRL (PAD_CTL_IBE_ENABLE | PAD_CTL_DSE_20ohm | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH)
+
enum {
VF610_PAD_PTA6__RMII0_CLKIN = IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTA6__RMII0_CLKOUT = IOMUX_PAD(0x0000, 0x0000, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
@@ -91,6 +96,10 @@ enum {
VF610_PAD_PTC15__RMII1_TD1 = IOMUX_PAD(0x00f0, 0x00f0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTC16__RMII1_TD0 = IOMUX_PAD(0x00f4, 0x00f4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
VF610_PAD_PTC17__RMII1_TXEN = IOMUX_PAD(0x00f8, 0x00f8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+ VF610_PAD_PTD5__DSPI1_CS0 = IOMUX_PAD(0x0150, 0x0150, 3, 0x300, 1, VF610_DSPI_PAD_CTRL),
+ VF610_PAD_PTD6__DSPI1_SIN = IOMUX_PAD(0x0154, 0x0154, 3, 0x2fc, 1, VF610_DSPI_SIN_PAD_CTRL),
+ VF610_PAD_PTD7__DSPI1_SOUT = IOMUX_PAD(0x0158, 0x0158, 3, __NA_, 0, VF610_DSPI_PAD_CTRL),
+ VF610_PAD_PTD8__DSPI1_SCK = IOMUX_PAD(0x015c, 0x015c, 3, 0x2f8, 1, VF610_DSPI_PAD_CTRL),
VF610_PAD_PTC29__GPIO_102 = IOMUX_PAD(0x0198, 0x0198, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTC30__GPIO_103 = IOMUX_PAD(0x019c, 0x019c, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTA24__ESDHC1_CLK = IOMUX_PAD(0x0038, 0x0038, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index e354c6d..7173022 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -146,6 +146,20 @@ static void setup_iomux_nfc(void)
}
#endif
+#ifdef CONFIG_FSL_DSPI
+static void setup_iomux_dspi(void)
+{
+ static const iomux_v3_cfg_t dspi1_pads[] = {
+ VF610_PAD_PTD5__DSPI1_CS0,
+ VF610_PAD_PTD6__DSPI1_SIN,
+ VF610_PAD_PTD7__DSPI1_SOUT,
+ VF610_PAD_PTD8__DSPI1_SCK,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(dspi1_pads, ARRAY_SIZE(dspi1_pads));
+}
+#endif
+
#ifdef CONFIG_VYBRID_GPIO
static void setup_iomux_gpio(void)
{
@@ -252,6 +266,9 @@ static void clock_init(void)
clrsetbits_le32(&ccm->ccgr0, CCM_REG_CTRL_MASK,
CCM_CCGR0_UART0_CTRL_MASK);
+#ifdef CONFIG_FSL_DSPI
+ setbits_le32(&ccm->ccgr0, CCM_CCGR0_DSPI1_CTRL_MASK);
+#endif
clrsetbits_le32(&ccm->ccgr1, CCM_REG_CTRL_MASK,
CCM_CCGR1_PIT_CTRL_MASK | CCM_CCGR1_WDOGA5_CTRL_MASK);
clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK,
@@ -364,6 +381,10 @@ int board_early_init_f(void)
setup_iomux_gpio();
#endif
+#ifdef CONFIG_FSL_DSPI
+ setup_iomux_dspi();
+#endif
+
return 0;
}
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 07/11] vf610: dts: Add device tree support
2015-06-01 8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
` (5 preceding siblings ...)
2015-06-01 8:51 ` [U-Boot] [PATCH V2 06/11] arm: vf610: Add iomux " Bhuvanchandra DV
@ 2015-06-01 8:51 ` Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 08/11] colibri-vf: Enable SPI support Bhuvanchandra DV
` (3 subsequent siblings)
10 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 8:51 UTC (permalink / raw)
To: u-boot
Add device tree files for Freescale Vybrid platform and
Toradex Colibri VF50, VF61 modules.
Device tree files are taken from upstream Kernel.
Removed the stuff which are not used/supported yet in U-Boot.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
arch/arm/dts/Makefile | 3 ++
arch/arm/dts/vf-colibri.dtsi | 21 +++++++++
arch/arm/dts/vf.dtsi | 100 +++++++++++++++++++++++++++++++++++++++++
arch/arm/dts/vf500-colibri.dts | 18 ++++++++
arch/arm/dts/vf610-colibri.dts | 18 ++++++++
5 files changed, 160 insertions(+)
create mode 100644 arch/arm/dts/vf-colibri.dtsi
create mode 100644 arch/arm/dts/vf.dtsi
create mode 100644 arch/arm/dts/vf500-colibri.dts
create mode 100644 arch/arm/dts/vf610-colibri.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 267fd17..55039df 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -130,6 +130,9 @@ dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
+ vf610-colibri.dtb
+
targets += $(dtb-y)
DTC_FLAGS += -R 4 -p 0x1000
diff --git a/arch/arm/dts/vf-colibri.dtsi b/arch/arm/dts/vf-colibri.dtsi
new file mode 100644
index 0000000..7a8e9bee
--- /dev/null
+++ b/arch/arm/dts/vf-colibri.dtsi
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+ or X11
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include "vf.dtsi"
+
+&dspi1 {
+ status = "okay";
+ bus-num = <1>;
+
+ spi_cmd: sspi at 0 {
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
diff --git a/arch/arm/dts/vf.dtsi b/arch/arm/dts/vf.dtsi
new file mode 100644
index 0000000..78706e1
--- /dev/null
+++ b/arch/arm/dts/vf.dtsi
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+ or X11
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ spi0 = &dspi0;
+ spi1 = &dspi1;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ aips0: aips-bus at 40000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dspi0: dspi0 at 4002c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x4002c000 0x1000>;
+ num-cs = <5>;
+ status = "disabled";
+ };
+
+ dspi1: dspi1 at 4002d000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x4002d000 0x1000>;
+ num-cs = <5>;
+ status = "disabled";
+ };
+
+ qspi0: quadspi at 40044000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-qspi";
+ reg = <0x40044000 0x1000>;
+ status = "disabled";
+ };
+
+ gpio0: gpio at 40049000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x400ff000 0x40>;
+ #gpio-cells = <2>;
+ };
+
+ gpio1: gpio at 4004a000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x400ff040 0x40>;
+ #gpio-cells = <2>;
+ };
+
+ gpio2: gpio at 4004b000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x400ff080 0x40>;
+ #gpio-cells = <2>;
+ };
+
+ gpio3: gpio at 4004c000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x400ff0c0 0x40>;
+ #gpio-cells = <2>;
+ };
+
+ gpio4: gpio at 4004d000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x400ff100 0x40>;
+ #gpio-cells = <2>;
+ };
+ };
+
+ aips1: aips-bus at 40080000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
+ };
+};
diff --git a/arch/arm/dts/vf500-colibri.dts b/arch/arm/dts/vf500-colibri.dts
new file mode 100644
index 0000000..e383306
--- /dev/null
+++ b/arch/arm/dts/vf500-colibri.dts
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+ or X11
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf-colibri.dtsi"
+
+/ {
+ model = "Toradex Colibri VF50";
+ compatible = "toradex,vf500-colibri_vf50", "toradex,vf500-colibri_vf50", "fsl,vf500";
+};
diff --git a/arch/arm/dts/vf610-colibri.dts b/arch/arm/dts/vf610-colibri.dts
new file mode 100644
index 0000000..63bb3f4
--- /dev/null
+++ b/arch/arm/dts/vf610-colibri.dts
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+ or X11
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf-colibri.dtsi"
+
+/ {
+ model = "Toradex Colibri VF61";
+ compatible = "toradex,vf610-colibri_vf61", "toradex,vf610-colibri_vf61", "fsl,vf610";
+};
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 08/11] colibri-vf: Enable SPI support
2015-06-01 8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
` (6 preceding siblings ...)
2015-06-01 8:51 ` [U-Boot] [PATCH V2 07/11] vf610: dts: Add device tree support Bhuvanchandra DV
@ 2015-06-01 8:51 ` Bhuvanchandra DV
2015-06-01 10:32 ` Stefan Agner
2015-06-01 8:51 ` [U-Boot] [PATCH V2 09/11] colibri_vf: Add separate defconfig for device tree support Bhuvanchandra DV
` (2 subsequent siblings)
10 siblings, 1 reply; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 8:51 UTC (permalink / raw)
To: u-boot
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
include/configs/colibri_vf.h | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 195102b..3e57417 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -272,4 +272,15 @@
#define CONFIG_USB_GADGET_MASS_STORAGE
#define CONFIG_CMD_USB_MASS_STORAGE
+/* Enable SPI support */
+#define CONFIG_DM_SPI
+#define CONFIG_CMD_SPI
+#define CONFIG_FSL_DSPI
+
+#ifndef CONFIG_OF_CONTROL
+#undef CONFIG_DM_SPI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_FSL_DSPI
+#endif
+
#endif /* __CONFIG_H */
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 09/11] colibri_vf: Add separate defconfig for device tree support
2015-06-01 8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
` (7 preceding siblings ...)
2015-06-01 8:51 ` [U-Boot] [PATCH V2 08/11] colibri-vf: Enable SPI support Bhuvanchandra DV
@ 2015-06-01 8:51 ` Bhuvanchandra DV
2015-06-01 10:35 ` Stefan Agner
2015-06-01 8:51 ` [U-Boot] [PATCH V2 10/11] usb: ehci-vf: Add weak function for board specific initialisation Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio Bhuvanchandra DV
10 siblings, 1 reply; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 8:51 UTC (permalink / raw)
To: u-boot
Most of the drivers available for Vybrid are not yet converted
to OF model to use device tree model, only few drivers
like SPI and GPIO drivers use device trees.
Add separate defconfig for who needs to use device tree model.
Later this can be integrated to single defconfig.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
configs/colibri_vf_dtb_defconfig | 8 ++++++++
1 file changed, 8 insertions(+)
create mode 100644 configs/colibri_vf_dtb_defconfig
diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
new file mode 100644
index 0000000..d4c8c58
--- /dev/null
+++ b/configs/colibri_vf_dtb_defconfig
@@ -0,0 +1,8 @@
+CONFIG_ARM=y
+CONFIG_TARGET_COLIBRI_VF=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND"
+CONFIG_NAND_VF610_NFC=y
+CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
+CONFIG_DM=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 10/11] usb: ehci-vf: Add weak function for board specific initialisation
2015-06-01 8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
` (8 preceding siblings ...)
2015-06-01 8:51 ` [U-Boot] [PATCH V2 09/11] colibri_vf: Add separate defconfig for device tree support Bhuvanchandra DV
@ 2015-06-01 8:51 ` Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio Bhuvanchandra DV
10 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 8:51 UTC (permalink / raw)
To: u-boot
From: Sanchayan Maity <maitysanchayan@gmail.com>
Add a weak function board_ehci_hcd_init which can be used by the board
file for board specific initialisation.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
---
drivers/usb/host/ehci-vf.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/usb/host/ehci-vf.c b/drivers/usb/host/ehci-vf.c
index 5454855..98e0fc6 100644
--- a/drivers/usb/host/ehci-vf.c
+++ b/drivers/usb/host/ehci-vf.c
@@ -121,6 +121,11 @@ static void usb_oc_config(int index)
setbits_le32(ctrl, UCTRL_OVER_CUR_DIS);
}
+int __weak board_ehci_hcd_init(int port)
+{
+ return 0;
+}
+
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
@@ -136,6 +141,9 @@ int ehci_hcd_init(int index, enum usb_init_type init,
ehci = (struct usb_ehci *)nc_reg_bases[index];
+ /* Do board specific initialisation */
+ board_ehci_hcd_init(index);
+
usb_power_config(index);
usb_oc_config(index);
usb_internal_phy_clock_gate(index);
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio
2015-06-01 8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
` (9 preceding siblings ...)
2015-06-01 8:51 ` [U-Boot] [PATCH V2 10/11] usb: ehci-vf: Add weak function for board specific initialisation Bhuvanchandra DV
@ 2015-06-01 8:51 ` Bhuvanchandra DV
2015-06-01 10:25 ` Stefan Agner
10 siblings, 1 reply; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 8:51 UTC (permalink / raw)
To: u-boot
From: Sanchayan Maity <maitysanchayan@gmail.com>
Add IOMUX for the pad used as USB pen. This needs to be driven low for
the Iris and Viola boards where it is pulled up high by default. This is
required for the USB host functionality to work on these boards. Use the
board specific weak initialisation function, to drive the pin low which
would be called on "usb start".
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
---
arch/arm/include/asm/arch-vf610/iomux-vf610.h | 1 +
board/toradex/colibri_vf/colibri_vf.c | 25 +++++++++++++++++++++++++
2 files changed, 26 insertions(+)
diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
index b8b22b1..019307b 100644
--- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -131,6 +131,7 @@ enum {
VF610_PAD_PTD1__QSPI0_A_CS0 = IOMUX_PAD(0x0140, 0x0140, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
VF610_PAD_PTD2__QSPI0_A_DATA3 = IOMUX_PAD(0x0144, 0x0144, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
VF610_PAD_PTD3__QSPI0_A_DATA2 = IOMUX_PAD(0x0148, 0x0148, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+ VF610_PAD_PTD4__GPIO_83 = IOMUX_PAD(0x014C, 0x014C, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
VF610_PAD_PTD4__QSPI0_A_DATA1 = IOMUX_PAD(0x014c, 0x014c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
VF610_PAD_PTD5__QSPI0_A_DATA0 = IOMUX_PAD(0x0150, 0x0150, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
VF610_PAD_PTD7__QSPI0_B_QSCK = IOMUX_PAD(0x0158, 0x0158, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index 7173022..8618fd0 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -20,6 +20,7 @@
#include <netdev.h>
#include <i2c.h>
#include <g_dnl.h>
+#include <asm/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -32,6 +33,12 @@ DECLARE_GLOBAL_DATA_PTR;
#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE)
+#define USB_PEN_GPIO 83
+
+static const iomux_v3_cfg_t usb_pads[] = {
+ VF610_PAD_PTD4__GPIO_83,
+};
+
int dram_init(void)
{
static const struct ddr3_jedec_timings timings = {
@@ -464,3 +471,21 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
return 0;
}
+
+#ifdef CONFIG_USB_EHCI_VF
+int board_ehci_hcd_init(int port)
+{
+ imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
+
+ switch (port) {
+ case 0:
+ /* USBC does not have PEN, also configured as USB client only */
+ break;
+ case 1:
+ gpio_request(USB_PEN_GPIO, "usb-pen-gpio");
+ gpio_direction_output(USB_PEN_GPIO, 0);
+ break;
+ }
+ return 0;
+}
+#endif
--
2.1.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio
2015-06-01 8:51 ` [U-Boot] [PATCH V2 11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio Bhuvanchandra DV
@ 2015-06-01 10:25 ` Stefan Agner
0 siblings, 0 replies; 39+ messages in thread
From: Stefan Agner @ 2015-06-01 10:25 UTC (permalink / raw)
To: u-boot
On 2015-06-01 10:51, Bhuvanchandra DV wrote:
> From: Sanchayan Maity <maitysanchayan@gmail.com>
>
> Add IOMUX for the pad used as USB pen. This needs to be driven low for
> the Iris and Viola boards where it is pulled up high by default. This is
> required for the USB host functionality to work on these boards. Use the
> board specific weak initialisation function, to drive the pin low which
> would be called on "usb start".
>
> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
> ---
> arch/arm/include/asm/arch-vf610/iomux-vf610.h | 1 +
> board/toradex/colibri_vf/colibri_vf.c | 25 +++++++++++++++++++++++++
> 2 files changed, 26 insertions(+)
>
> diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
> b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
> index b8b22b1..019307b 100644
> --- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
> +++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
> @@ -131,6 +131,7 @@ enum {
> VF610_PAD_PTD1__QSPI0_A_CS0 = IOMUX_PAD(0x0140, 0x0140, 1, __NA_,
> 0, VF610_QSPI_PAD_CTRL),
> VF610_PAD_PTD2__QSPI0_A_DATA3 = IOMUX_PAD(0x0144, 0x0144, 1, __NA_,
> 0, VF610_QSPI_PAD_CTRL),
> VF610_PAD_PTD3__QSPI0_A_DATA2 = IOMUX_PAD(0x0148, 0x0148, 1, __NA_,
> 0, VF610_QSPI_PAD_CTRL),
> + VF610_PAD_PTD4__GPIO_83 = IOMUX_PAD(0x014C, 0x014C, 0,
> __NA_, 0, VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTD4__QSPI0_A_DATA1 = IOMUX_PAD(0x014c, 0x014c, 1, __NA_,
> 0, VF610_QSPI_PAD_CTRL),
> VF610_PAD_PTD5__QSPI0_A_DATA0 = IOMUX_PAD(0x0150, 0x0150, 1, __NA_,
> 0, VF610_QSPI_PAD_CTRL),
> VF610_PAD_PTD7__QSPI0_B_QSCK = IOMUX_PAD(0x0158, 0x0158, 1, __NA_,
> 0, VF610_QSPI_PAD_CTRL),
> diff --git a/board/toradex/colibri_vf/colibri_vf.c
> b/board/toradex/colibri_vf/colibri_vf.c
> index 7173022..8618fd0 100644
> --- a/board/toradex/colibri_vf/colibri_vf.c
> +++ b/board/toradex/colibri_vf/colibri_vf.c
> @@ -20,6 +20,7 @@
> #include <netdev.h>
> #include <i2c.h>
> #include <g_dnl.h>
> +#include <asm/gpio.h>
>
> DECLARE_GLOBAL_DATA_PTR;
>
> @@ -32,6 +33,12 @@ DECLARE_GLOBAL_DATA_PTR;
> #define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
> PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE)
>
> +#define USB_PEN_GPIO 83
> +
> +static const iomux_v3_cfg_t usb_pads[] = {
> + VF610_PAD_PTD4__GPIO_83,
> +};
> +
> int dram_init(void)
> {
> static const struct ddr3_jedec_timings timings = {
> @@ -464,3 +471,21 @@ int g_dnl_bind_fixup(struct usb_device_descriptor
> *dev, const char *name)
>
> return 0;
> }
> +
> +#ifdef CONFIG_USB_EHCI_VF
> +int board_ehci_hcd_init(int port)
> +{
> + imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
> +
> + switch (port) {
> + case 0:
> + /* USBC does not have PEN, also configured as USB client only */
> + break;
> + case 1:
> + gpio_request(USB_PEN_GPIO, "usb-pen-gpio");
> + gpio_direction_output(USB_PEN_GPIO, 0);
> + break;
> + }
> + return 0;
> +}
> +#endif
Acked-by: Stefan Agner <stefan@agner.ch>
--
Stefan
^ permalink raw reply [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 03/11] colibri_vf: Add pinmux entries for GPIOs
2015-06-01 8:51 ` [U-Boot] [PATCH V2 03/11] colibri_vf: Add pinmux entries for GPIOs Bhuvanchandra DV
@ 2015-06-01 10:26 ` Stefan Agner
0 siblings, 0 replies; 39+ messages in thread
From: Stefan Agner @ 2015-06-01 10:26 UTC (permalink / raw)
To: u-boot
On 2015-06-01 10:51, Bhuvanchandra DV wrote:
> Inorder to use the pins as GPIO, apart from setting the alt-function,
> pinmuxing need to be done, this patch adds pinmux entries of
> few GPIOs.
>
> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
> ---
> arch/arm/include/asm/arch-vf610/iomux-vf610.h | 49 ++++++++++++++++++++++
> board/toradex/colibri_vf/colibri_vf.c | 60 +++++++++++++++++++++++++++
> 2 files changed, 109 insertions(+)
>
> diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
> b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
> index 9226e69..e22e3f9 100644
> --- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
> +++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
> @@ -32,22 +32,56 @@
> #define VF610_QSPI_PAD_CTRL (PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_150ohm | \
> PAD_CTL_PUS_22K_UP | PAD_CTL_OBE_IBE_ENABLE)
>
> +#define VF610_GPIO_PAD_CTRL (PAD_CTL_SPEED_MED | PAD_CTL_DSE_50ohm | \
> + PAD_CTL_PUS_47K_UP | PAD_CTL_IBE_ENABLE)
> +
> enum {
> VF610_PAD_PTA6__RMII0_CLKIN = IOMUX_PAD(0x0000, 0x0000, 2, __NA_,
> 0, VF610_ENET_PAD_CTRL),
> VF610_PAD_PTA6__RMII0_CLKOUT = IOMUX_PAD(0x0000, 0x0000, 1, __NA_,
> 0, VF610_ENET_PAD_CTRL),
> + VF610_PAD_PTA7__GPIO_134 = IOMUX_PAD(0x0218, 0x0218, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTA17__GPIO_7 = IOMUX_PAD(0x001c, 0x001c, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTA20__GPIO_10 = IOMUX_PAD(0x0028, 0x0028, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTA21__GPIO_11 = IOMUX_PAD(0x002c, 0x002c, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTA30__GPIO_20 = IOMUX_PAD(0x0050, 0x0050, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTA31__GPIO_21 = IOMUX_PAD(0x0054, 0x0054, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTB0__GPIO_22 = IOMUX_PAD(0x0058, 0x0058, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTB1__GPIO_23 = IOMUX_PAD(0x005C, 0x005C, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTB4__UART1_TX = IOMUX_PAD(0x0068, 0x0068, 2, 0x0380, 0,
> VF610_UART_PAD_CTRL),
> VF610_PAD_PTB5__UART1_RX = IOMUX_PAD(0x006c, 0x006c, 2, 0x037c, 0,
> VF610_UART_PAD_CTRL),
> + VF610_PAD_PTB6__GPIO_28 = IOMUX_PAD(0x0070, 0x0070, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTB7__GPIO_29 = IOMUX_PAD(0x0074, 0x0074, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTB8__GPIO_30 = IOMUX_PAD(0x0078, 0x0078, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTB9__GPIO_31 = IOMUX_PAD(0x007C, 0x007C, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTB10__UART0_TX = IOMUX_PAD(0x0080, 0x0080, 1, __NA_, 0,
> VF610_UART_PAD_CTRL),
> VF610_PAD_PTB11__UART0_RX = IOMUX_PAD(0x0084, 0x0084, 1, __NA_, 0,
> VF610_UART_PAD_CTRL),
> + VF610_PAD_PTB12__GPIO_34 = IOMUX_PAD(0x0088, 0x0088, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTB13__GPIO_35 = IOMUX_PAD(0x008c, 0x008c, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTB16__GPIO_38 = IOMUX_PAD(0x0098, 0x0098, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTB17__GPIO_39 = IOMUX_PAD(0x009c, 0x009c, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTB18__GPIO_40 = IOMUX_PAD(0x00a0, 0x00a0, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTB21__GPIO_43 = IOMUX_PAD(0x00ac, 0x00ac, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTB22__GPIO_44 = IOMUX_PAD(0x00b0, 0x00b0, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTB23__GPIO_93 = IOMUX_PAD(0x0174, 0x0174, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTB26__GPIO_96 = IOMUX_PAD(0x0180, 0x0180, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTB28__GPIO_98 = IOMUX_PAD(0x0188, 0x0188, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTC1__GPIO_46 = IOMUX_PAD(0x00b8, 0x00b8, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTC1__RMII0_MDIO = IOMUX_PAD(0x00b8, 0x00b8, 1, __NA_, 0,
> VF610_ENET_PAD_CTRL),
> + VF610_PAD_PTC0__GPIO_45 = IOMUX_PAD(0x00b4, 0x00b4, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTC0__RMII0_MDC = IOMUX_PAD(0x00b4, 0x00b4, 1, __NA_, 0,
> VF610_ENET_PAD_CTRL),
> VF610_PAD_PTC2__RMII0_CRS_DV = IOMUX_PAD(0x00bc, 0x00bc, 1, __NA_,
> 0, VF610_ENET_PAD_CTRL),
> + VF610_PAD_PTC2__GPIO_47 = IOMUX_PAD(0x00bc, 0x00bc, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTC3__RMII0_RD1 = IOMUX_PAD(0x00c0, 0x00c0, 1, __NA_, 0,
> VF610_ENET_PAD_CTRL),
> + VF610_PAD_PTC3__GPIO_48 = IOMUX_PAD(0x00c0, 0x00c0, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTC4__RMII0_RD0 = IOMUX_PAD(0x00c4, 0x00c4, 1, __NA_, 0,
> VF610_ENET_PAD_CTRL),
> + VF610_PAD_PTC4__GPIO_49 = IOMUX_PAD(0x00c4, 0x00c4, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTC5__RMII0_RXER = IOMUX_PAD(0x00c8, 0x00c8, 1, __NA_, 0,
> VF610_ENET_PAD_CTRL),
> + VF610_PAD_PTC5__GPIO_50 = IOMUX_PAD(0x00c8, 0x00c8, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTC6__RMII0_TD1 = IOMUX_PAD(0x00cc, 0x00cc, 1, __NA_, 0,
> VF610_ENET_PAD_CTRL),
> + VF610_PAD_PTC6__GPIO_51 = IOMUX_PAD(0x00cc, 0x00cc, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTC7__RMII0_TD0 = IOMUX_PAD(0x00D0, 0x00D0, 1, __NA_, 0,
> VF610_ENET_PAD_CTRL),
> + VF610_PAD_PTC7__GPIO_52 = IOMUX_PAD(0x00D0, 0x00D0, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTC8__RMII0_TXEN = IOMUX_PAD(0x00D4, 0x00D4, 1, __NA_, 0,
> VF610_ENET_PAD_CTRL),
> + VF610_PAD_PTC8__GPIO_53 = IOMUX_PAD(0x00D4, 0x00D4, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTC10__RMII1_MDIO = IOMUX_PAD(0x00dc, 0x00dc, 1, __NA_,
> 0, VF610_ENET_PAD_CTRL),
> VF610_PAD_PTC9__RMII1_MDC = IOMUX_PAD(0x00d8, 0x00d8, 1, __NA_, 0,
> VF610_ENET_PAD_CTRL),
> VF610_PAD_PTC11__RMII1_CRS_DV = IOMUX_PAD(0x00e0, 0x00e0, 1, __NA_,
> 0, VF610_ENET_PAD_CTRL),
> @@ -57,6 +91,8 @@ enum {
> VF610_PAD_PTC15__RMII1_TD1 = IOMUX_PAD(0x00f0, 0x00f0, 1, __NA_, 0,
> VF610_ENET_PAD_CTRL),
> VF610_PAD_PTC16__RMII1_TD0 = IOMUX_PAD(0x00f4, 0x00f4, 1, __NA_, 0,
> VF610_ENET_PAD_CTRL),
> VF610_PAD_PTC17__RMII1_TXEN = IOMUX_PAD(0x00f8, 0x00f8, 1, __NA_,
> 0, VF610_ENET_PAD_CTRL),
> + VF610_PAD_PTC29__GPIO_102 = IOMUX_PAD(0x0198, 0x0198, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTC30__GPIO_103 = IOMUX_PAD(0x019c, 0x019c, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTA24__ESDHC1_CLK = IOMUX_PAD(0x0038, 0x0038, 5, __NA_,
> 0, VF610_SDHC_PAD_CTRL),
> VF610_PAD_PTA25__ESDHC1_CMD = IOMUX_PAD(0x003c, 0x003c, 5, __NA_,
> 0, VF610_SDHC_PAD_CTRL),
> VF610_PAD_PTA26__ESDHC1_DAT0 = IOMUX_PAD(0x0040, 0x0040, 5, __NA_,
> 0, VF610_SDHC_PAD_CTRL),
> @@ -66,13 +102,21 @@ enum {
> VF610_PAD_PTB14__I2C0_SCL = IOMUX_PAD(0x0090, 0x0090, 2, 0x033c, 1,
> VF610_I2C_PAD_CTRL),
> VF610_PAD_PTB15__I2C0_SDA = IOMUX_PAD(0x0094, 0x0094, 2, 0x0340, 1,
> VF610_I2C_PAD_CTRL),
> VF610_PAD_PTD31__NF_IO15 = IOMUX_PAD(0x00fc, 0x00fc, 2, __NA_, 0,
> VF610_NFC_IO_PAD_CTRL),
> + VF610_PAD_PTD31__GPIO_63 = IOMUX_PAD(0x00fc, 0x00fc, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTD30__NF_IO14 = IOMUX_PAD(0x0100, 0x0100, 2, __NA_, 0,
> VF610_NFC_IO_PAD_CTRL),
> + VF610_PAD_PTD30__GPIO_64 = IOMUX_PAD(0x0100, 0x0100, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTD29__NF_IO13 = IOMUX_PAD(0x0104, 0x0104, 2, __NA_, 0,
> VF610_NFC_IO_PAD_CTRL),
> + VF610_PAD_PTD29__GPIO_65 = IOMUX_PAD(0x0104, 0x0104, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTD28__NF_IO12 = IOMUX_PAD(0x0108, 0x0108, 2, __NA_, 0,
> VF610_NFC_IO_PAD_CTRL),
> + VF610_PAD_PTD28__GPIO_66 = IOMUX_PAD(0x0108, 0x0108, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTD27__NF_IO11 = IOMUX_PAD(0x010c, 0x010c, 2, __NA_, 0,
> VF610_NFC_IO_PAD_CTRL),
> + VF610_PAD_PTD27__GPIO_67 = IOMUX_PAD(0x010c, 0x010c, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTD26__NF_IO10 = IOMUX_PAD(0x0110, 0x0110, 2, __NA_, 0,
> VF610_NFC_IO_PAD_CTRL),
> + VF610_PAD_PTD26__GPIO_68 = IOMUX_PAD(0x0110, 0x0110, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTD25__NF_IO9 = IOMUX_PAD(0x0114, 0x0114, 2, __NA_, 0,
> VF610_NFC_IO_PAD_CTRL),
> + VF610_PAD_PTD25__GPIO_69 = IOMUX_PAD(0x0114, 0x0114, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTD24__NF_IO8 = IOMUX_PAD(0x0118, 0x0118, 2, __NA_, 0,
> VF610_NFC_IO_PAD_CTRL),
> + VF610_PAD_PTD24__GPIO_70 = IOMUX_PAD(0x0118, 0x0118, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTD23__NF_IO7 = IOMUX_PAD(0x011c, 0x011c, 2, __NA_, 0,
> VF610_NFC_IO_PAD_CTRL),
> VF610_PAD_PTD0__QSPI0_A_QSCK = IOMUX_PAD(0x013c, 0x013c, 1, __NA_,
> 0, VF610_QSPI_PAD_CTRL),
> VF610_PAD_PTD1__QSPI0_A_CS0 = IOMUX_PAD(0x0140, 0x0140, 1, __NA_,
> 0, VF610_QSPI_PAD_CTRL),
> @@ -83,9 +127,14 @@ enum {
> VF610_PAD_PTD7__QSPI0_B_QSCK = IOMUX_PAD(0x0158, 0x0158, 1, __NA_,
> 0, VF610_QSPI_PAD_CTRL),
> VF610_PAD_PTD8__QSPI0_B_CS0 = IOMUX_PAD(0x015c, 0x015c, 1, __NA_,
> 0, VF610_QSPI_PAD_CTRL),
> VF610_PAD_PTD9__QSPI0_B_DATA3 = IOMUX_PAD(0x0160, 0x0160, 1, __NA_,
> 0, VF610_QSPI_PAD_CTRL),
> + VF610_PAD_PTD9__GPIO_88 = IOMUX_PAD(0x0160, 0x0160, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTD10__QSPI0_B_DATA2 = IOMUX_PAD(0x0164, 0x0164, 1,
> __NA_, 0, VF610_QSPI_PAD_CTRL),
> + VF610_PAD_PTD10__GPIO_89 = IOMUX_PAD(0x0164, 0x0164, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTD11__QSPI0_B_DATA1 = IOMUX_PAD(0x0168, 0x0168, 1,
> __NA_, 0, VF610_QSPI_PAD_CTRL),
> + VF610_PAD_PTD11__GPIO_90 = IOMUX_PAD(0x0168, 0x0168, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTD12__QSPI0_B_DATA0 = IOMUX_PAD(0x016c, 0x016c, 1,
> __NA_, 0, VF610_QSPI_PAD_CTRL),
> + VF610_PAD_PTD12__GPIO_91 = IOMUX_PAD(0x016c, 0x016c, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> + VF610_PAD_PTD13__GPIO_92 = IOMUX_PAD(0x0170, 0x0170, 0, __NA_, 0,
> VF610_GPIO_PAD_CTRL),
> VF610_PAD_PTD22__NF_IO6 = IOMUX_PAD(0x0120, 0x0120, 2, __NA_, 0,
> VF610_NFC_IO_PAD_CTRL),
> VF610_PAD_PTD21__NF_IO5 = IOMUX_PAD(0x0124, 0x0124, 2, __NA_, 0,
> VF610_NFC_IO_PAD_CTRL),
> VF610_PAD_PTD20__NF_IO4 = IOMUX_PAD(0x0128, 0x0128, 2, __NA_, 0,
> VF610_NFC_IO_PAD_CTRL),
> diff --git a/board/toradex/colibri_vf/colibri_vf.c
> b/board/toradex/colibri_vf/colibri_vf.c
> index 31ebb19..e354c6d 100644
> --- a/board/toradex/colibri_vf/colibri_vf.c
> +++ b/board/toradex/colibri_vf/colibri_vf.c
> @@ -146,6 +146,62 @@ static void setup_iomux_nfc(void)
> }
> #endif
>
> +#ifdef CONFIG_VYBRID_GPIO
> +static void setup_iomux_gpio(void)
> +{
> + static const iomux_v3_cfg_t gpio_pads[] = {
> + VF610_PAD_PTA17__GPIO_7,
> + VF610_PAD_PTA20__GPIO_10,
> + VF610_PAD_PTA21__GPIO_11,
> + VF610_PAD_PTA30__GPIO_20,
> + VF610_PAD_PTA31__GPIO_21,
> + VF610_PAD_PTB0__GPIO_22,
> + VF610_PAD_PTB1__GPIO_23,
> + VF610_PAD_PTB6__GPIO_28,
> + VF610_PAD_PTB7__GPIO_29,
> + VF610_PAD_PTB8__GPIO_30,
> + VF610_PAD_PTB9__GPIO_31,
> + VF610_PAD_PTB12__GPIO_34,
> + VF610_PAD_PTB13__GPIO_35,
> + VF610_PAD_PTB16__GPIO_38,
> + VF610_PAD_PTB17__GPIO_39,
> + VF610_PAD_PTB18__GPIO_40,
> + VF610_PAD_PTB21__GPIO_43,
> + VF610_PAD_PTB22__GPIO_44,
> + VF610_PAD_PTC0__GPIO_45,
> + VF610_PAD_PTC1__GPIO_46,
> + VF610_PAD_PTC2__GPIO_47,
> + VF610_PAD_PTC3__GPIO_48,
> + VF610_PAD_PTC4__GPIO_49,
> + VF610_PAD_PTC5__GPIO_50,
> + VF610_PAD_PTC6__GPIO_51,
> + VF610_PAD_PTC7__GPIO_52,
> + VF610_PAD_PTC8__GPIO_53,
> + VF610_PAD_PTD31__GPIO_63,
> + VF610_PAD_PTD30__GPIO_64,
> + VF610_PAD_PTD29__GPIO_65,
> + VF610_PAD_PTD28__GPIO_66,
> + VF610_PAD_PTD27__GPIO_67,
> + VF610_PAD_PTD26__GPIO_68,
> + VF610_PAD_PTD25__GPIO_69,
> + VF610_PAD_PTD24__GPIO_70,
> + VF610_PAD_PTD9__GPIO_88,
> + VF610_PAD_PTD10__GPIO_89,
> + VF610_PAD_PTD11__GPIO_90,
> + VF610_PAD_PTD12__GPIO_91,
> + VF610_PAD_PTD13__GPIO_92,
> + VF610_PAD_PTB23__GPIO_93,
> + VF610_PAD_PTB26__GPIO_96,
> + VF610_PAD_PTB28__GPIO_98,
> + VF610_PAD_PTC29__GPIO_102,
> + VF610_PAD_PTC30__GPIO_103,
> + VF610_PAD_PTA7__GPIO_134,
> + };
> +
> + imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
> +}
> +#endif
> +
> #ifdef CONFIG_FSL_ESDHC
> struct fsl_esdhc_cfg esdhc_cfg[1] = {
> {ESDHC1_BASE_ADDR},
> @@ -304,6 +360,10 @@ int board_early_init_f(void)
> setup_iomux_nfc();
> #endif
>
> +#ifdef CONFIG_VYBRID_GPIO
> + setup_iomux_gpio();
> +#endif
> +
> return 0;
> }
Acked-by: Stefan Agner <stefan@agner.ch>
--
Stefan
^ permalink raw reply [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 08/11] colibri-vf: Enable SPI support
2015-06-01 8:51 ` [U-Boot] [PATCH V2 08/11] colibri-vf: Enable SPI support Bhuvanchandra DV
@ 2015-06-01 10:32 ` Stefan Agner
2015-06-01 12:27 ` Bhuvanchandra DV
0 siblings, 1 reply; 39+ messages in thread
From: Stefan Agner @ 2015-06-01 10:32 UTC (permalink / raw)
To: u-boot
On 2015-06-01 10:51, Bhuvanchandra DV wrote:
> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
> ---
> include/configs/colibri_vf.h | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
> index 195102b..3e57417 100644
> --- a/include/configs/colibri_vf.h
> +++ b/include/configs/colibri_vf.h
> @@ -272,4 +272,15 @@
> #define CONFIG_USB_GADGET_MASS_STORAGE
> #define CONFIG_CMD_USB_MASS_STORAGE
>
> +/* Enable SPI support */
> +#define CONFIG_DM_SPI
> +#define CONFIG_CMD_SPI
> +#define CONFIG_FSL_DSPI
> +
> +#ifndef CONFIG_OF_CONTROL
> +#undef CONFIG_DM_SPI
> +#undef CONFIG_CMD_SPI
> +#undef CONFIG_FSL_DSPI
> +#endif
> +
> #endif /* __CONFIG_H */
Hm, any specific reason we need to define them unconditionally first?
Couldn't we just inverse the logic and safe the undefs?
#ifdef CONFIG_OF_CONTROL
#define CONFIG_DM_SPI
#define CONFIG_CMD_SPI
#define CONFIG_FSL_DSPI
#endif
--
Stefan
^ permalink raw reply [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 09/11] colibri_vf: Add separate defconfig for device tree support
2015-06-01 8:51 ` [U-Boot] [PATCH V2 09/11] colibri_vf: Add separate defconfig for device tree support Bhuvanchandra DV
@ 2015-06-01 10:35 ` Stefan Agner
2015-06-01 12:28 ` Bhuvanchandra DV
0 siblings, 1 reply; 39+ messages in thread
From: Stefan Agner @ 2015-06-01 10:35 UTC (permalink / raw)
To: u-boot
On 2015-06-01 10:51, Bhuvanchandra DV wrote:
> Most of the drivers available for Vybrid are not yet converted
> to OF model to use device tree model, only few drivers
> like SPI and GPIO drivers use device trees.
> Add separate defconfig for who needs to use device tree model.
> Later this can be integrated to single defconfig.
>
> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
> ---
> configs/colibri_vf_dtb_defconfig | 8 ++++++++
> 1 file changed, 8 insertions(+)
> create mode 100644 configs/colibri_vf_dtb_defconfig
>
> diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
> new file mode 100644
> index 0000000..d4c8c58
> --- /dev/null
> +++ b/configs/colibri_vf_dtb_defconfig
> @@ -0,0 +1,8 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_COLIBRI_VF=y
> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND"
> +CONFIG_NAND_VF610_NFC=y
> +CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
> +CONFIG_DM=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
One minor nit: Can you add this new file to the list of files in our
boards maintainer file?
board/toradex/colibri_vf/MAINTAINERS
But otherwise:
Acked-by: Stefan Agner <stefan@agner.ch>
--
Stefan
^ permalink raw reply [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 08/11] colibri-vf: Enable SPI support
2015-06-01 10:32 ` Stefan Agner
@ 2015-06-01 12:27 ` Bhuvanchandra DV
0 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 12:27 UTC (permalink / raw)
To: u-boot
Hello Stefan,
On 06/01/2015 04:02 PM, Stefan Agner wrote:
> On 2015-06-01 10:51, Bhuvanchandra DV wrote:
>> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
>> ---
>> include/configs/colibri_vf.h | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
>> index 195102b..3e57417 100644
>> --- a/include/configs/colibri_vf.h
>> +++ b/include/configs/colibri_vf.h
>> @@ -272,4 +272,15 @@
>> #define CONFIG_USB_GADGET_MASS_STORAGE
>> #define CONFIG_CMD_USB_MASS_STORAGE
>>
>> +/* Enable SPI support */
>> +#define CONFIG_DM_SPI
>> +#define CONFIG_CMD_SPI
>> +#define CONFIG_FSL_DSPI
>> +
>> +#ifndef CONFIG_OF_CONTROL
>> +#undef CONFIG_DM_SPI
>> +#undef CONFIG_CMD_SPI
>> +#undef CONFIG_FSL_DSPI
>> +#endif
>> +
>> #endif /* __CONFIG_H */
>
> Hm, any specific reason we need to define them unconditionally first?
>
> Couldn't we just inverse the logic and safe the undefs?
>
> #ifdef CONFIG_OF_CONTROL
> #define CONFIG_DM_SPI
> #define CONFIG_CMD_SPI
> #define CONFIG_FSL_DSPI
> #endif
>
Agreed to inverse the logic, as in both the above cases DSPI support is
enabled by default when OF_CONTROL was defined. Your suggestion sounds
good. Will update it accordingly, thanks!
> --
> Stefan
>
Best regards,
Bhuvan
^ permalink raw reply [flat|nested] 39+ messages in thread
* [U-Boot] [PATCH V2 09/11] colibri_vf: Add separate defconfig for device tree support
2015-06-01 10:35 ` Stefan Agner
@ 2015-06-01 12:28 ` Bhuvanchandra DV
0 siblings, 0 replies; 39+ messages in thread
From: Bhuvanchandra DV @ 2015-06-01 12:28 UTC (permalink / raw)
To: u-boot
On 06/01/2015 04:05 PM, Stefan Agner wrote:
> On 2015-06-01 10:51, Bhuvanchandra DV wrote:
>> Most of the drivers available for Vybrid are not yet converted
>> to OF model to use device tree model, only few drivers
>> like SPI and GPIO drivers use device trees.
>> Add separate defconfig for who needs to use device tree model.
>> Later this can be integrated to single defconfig.
>>
>> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
>> ---
>> configs/colibri_vf_dtb_defconfig | 8 ++++++++
>> 1 file changed, 8 insertions(+)
>> create mode 100644 configs/colibri_vf_dtb_defconfig
>>
>> diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
>> new file mode 100644
>> index 0000000..d4c8c58
>> --- /dev/null
>> +++ b/configs/colibri_vf_dtb_defconfig
>> @@ -0,0 +1,8 @@
>> +CONFIG_ARM=y
>> +CONFIG_TARGET_COLIBRI_VF=y
>> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND"
>> +CONFIG_NAND_VF610_NFC=y
>> +CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
>> +CONFIG_DM=y
>> +CONFIG_OF_CONTROL=y
>> +CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
>
> One minor nit: Can you add this new file to the list of files in our
> boards maintainer file?
>
> board/toradex/colibri_vf/MAINTAINERS
Sure, will add it.
>
> But otherwise:
> Acked-by: Stefan Agner <stefan@agner.ch>
>
> --
> Stefan
>
Best regards,
Bhuvan
^ permalink raw reply [flat|nested] 39+ messages in thread
end of thread, other threads:[~2015-06-01 12:28 UTC | newest]
Thread overview: 39+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-05-18 13:06 [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 01/11] dm: gpio: uclass: Add flag to control sequence numbering Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 02/11] dm: gpio: vf610: Add GPIO driver support Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 03/11] colibri_vf: Add pinmux entries for GPIOs Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 04/11] colibri_vf: Enable GPIO support Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 05/11] arm: vf610: Add clock support for DSPI Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 06/11] arm: vf610: Add iomux " Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 07/11] vf610: dts: Add device tree support Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 08/11] colibri-vf: Enable SPI support Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 09/11] colibri_vf: Add separate defconfig for device tree support Bhuvanchandra DV
2015-06-01 7:45 ` Stefano Babic
2015-06-01 8:07 ` Bhuvanchandra DV
2015-05-18 13:06 ` [U-Boot] [PATCH 10/11] usb: ehci-vf: Add weak function for board specific initialisation Bhuvanchandra DV
2015-05-18 17:09 ` Marek Vasut
2015-05-18 18:52 ` maitysanchayan at gmail.com
2015-05-18 19:04 ` Marek Vasut
2015-05-18 13:06 ` [U-Boot] [PATCH 11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio Bhuvanchandra DV
2015-05-24 19:34 ` [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
2015-05-26 11:27 ` Stefano Babic
2015-06-01 5:34 ` Bhuvanchandra DV
2015-06-01 7:17 ` Stefano Babic
2015-06-01 8:51 ` [U-Boot] [PATCH V2 " Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 01/11] dm: gpio: uclass: Add flag to control sequence numbering Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 02/11] dm: gpio: vf610: Add GPIO driver support Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 03/11] colibri_vf: Add pinmux entries for GPIOs Bhuvanchandra DV
2015-06-01 10:26 ` Stefan Agner
2015-06-01 8:51 ` [U-Boot] [PATCH V2 04/11] colibri_vf: Enable GPIO support Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 05/11] arm: vf610: Add clock support for DSPI Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 06/11] arm: vf610: Add iomux " Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 07/11] vf610: dts: Add device tree support Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 08/11] colibri-vf: Enable SPI support Bhuvanchandra DV
2015-06-01 10:32 ` Stefan Agner
2015-06-01 12:27 ` Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 09/11] colibri_vf: Add separate defconfig for device tree support Bhuvanchandra DV
2015-06-01 10:35 ` Stefan Agner
2015-06-01 12:28 ` Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 10/11] usb: ehci-vf: Add weak function for board specific initialisation Bhuvanchandra DV
2015-06-01 8:51 ` [U-Boot] [PATCH V2 11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio Bhuvanchandra DV
2015-06-01 10:25 ` Stefan Agner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.