All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Subject: [PATCH] drm/i915: Don't check modeset state in the hw state force restore path
Date: Mon,  1 Jun 2015 15:41:23 +0300	[thread overview]
Message-ID: <1433162483-25476-1-git-send-email-ander.conselvan.de.oliveira@intel.com> (raw)

Since the force restore logic will restore the CRTCs state one at a
time, it is possible that the state will be inconsistent until the whole
operation finishes. A call to intel_modeset_check_state() is done once
it's over, so don't check the state multiple times in between. This
regression was introduced in:

commit 7f27126ea3db6ade886f18fd39caf0ff0cd1d37f
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Wed Nov 5 14:26:06 2014 -0800

    drm/i915: factor out compute_config from __intel_set_mode v3

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94431
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
---

Hi,

This patch applies on top of nightly, but it is only relevant without
Maarten's "drm/i915: Convert to atomic, part 2" series, because of the
changes to the hw state read out and force restore logic.

The regression exists since 3.19.

---
 drivers/gpu/drm/i915/intel_display.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 16e159d..24fb7ce 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -87,7 +87,8 @@ static void ironlake_pch_clock_get(struct intel_crtc *crtc,
 				   struct intel_crtc_state *pipe_config);
 
 static int intel_set_mode(struct drm_crtc *crtc,
-			  struct drm_atomic_state *state);
+			  struct drm_atomic_state *state,
+			  bool check);
 static int intel_framebuffer_init(struct drm_device *dev,
 				  struct intel_framebuffer *ifb,
 				  struct drm_mode_fb_cmd2 *mode_cmd,
@@ -10282,7 +10283,7 @@ retry:
 
 	drm_mode_copy(&crtc_state->base.mode, mode);
 
-	if (intel_set_mode(crtc, state)) {
+	if (intel_set_mode(crtc, state, true)) {
 		DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
 		if (old->release_fb)
 			old->release_fb->funcs->destroy(old->release_fb);
@@ -10356,7 +10357,7 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
 		if (ret)
 			goto fail;
 
-		ret = intel_set_mode(crtc, state);
+		ret = intel_set_mode(crtc, state, true);
 		if (ret)
 			goto fail;
 
@@ -12832,20 +12833,22 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
 }
 
 static int intel_set_mode_with_config(struct drm_crtc *crtc,
-				      struct intel_crtc_state *pipe_config)
+				      struct intel_crtc_state *pipe_config,
+				      bool check)
 {
 	int ret;
 
 	ret = __intel_set_mode(crtc, pipe_config);
 
-	if (ret == 0)
+	if (ret == 0 && check)
 		intel_modeset_check_state(crtc->dev);
 
 	return ret;
 }
 
 static int intel_set_mode(struct drm_crtc *crtc,
-			  struct drm_atomic_state *state)
+			  struct drm_atomic_state *state,
+			  bool check)
 {
 	struct intel_crtc_state *pipe_config;
 	int ret = 0;
@@ -12856,7 +12859,7 @@ static int intel_set_mode(struct drm_crtc *crtc,
 		goto out;
 	}
 
-	ret = intel_set_mode_with_config(crtc, pipe_config);
+	ret = intel_set_mode_with_config(crtc, pipe_config, check);
 	if (ret)
 		goto out;
 
@@ -12933,7 +12936,7 @@ void intel_crtc_restore_mode(struct drm_crtc *crtc)
 	intel_modeset_setup_plane_state(state, crtc, &crtc->mode,
 					crtc->primary->fb, crtc->x, crtc->y);
 
-	ret = intel_set_mode(crtc, state);
+	ret = intel_set_mode(crtc, state, false);
 	if (ret)
 		drm_atomic_state_free(state);
 }
@@ -13133,7 +13136,7 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
 
 	primary_plane_was_visible = primary_plane_visible(set->crtc);
 
-	ret = intel_set_mode_with_config(set->crtc, pipe_config);
+	ret = intel_set_mode_with_config(set->crtc, pipe_config, true);
 
 	if (ret == 0 &&
 	    pipe_config->base.enable &&
-- 
2.1.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2015-06-01 12:41 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-01 12:41 Ander Conselvan de Oliveira [this message]
2015-06-01 12:45 ` [PATCH] drm/i915: Don't check modeset state in the hw state force restore path Conselvan De Oliveira, Ander
2015-06-01 23:47 ` shuang.he
2015-06-02  7:12 ` Jani Nikula
2015-06-02  7:27   ` Maarten Lankhorst
2015-06-02  7:30     ` Ander Conselvan De Oliveira
2015-06-04 11:13       ` Jani Nikula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433162483-25476-1-git-send-email-ander.conselvan.de.oliveira@intel.com \
    --to=ander.conselvan.de.oliveira@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.