[PATCH 3.4 000/172] 3.4.108-rc1 review

[PATCH 3.4 000/172] 3.4.108-rc1 review

[lizf]

From: Zefan Li <lizefan@huawei.com>

This is the start of the stable review cycle for the 3.4.108 release.
There are 172 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Jun 18 08:30:58 UTC 2015.
Anything received after that time might be too late.

A combined patch relative to 3.4.107 will be posted as an additional
response to this.  A shortlog and diffstat can be found below.

thanks,

Zefan Li

--------------------

Adrian Knoth (1):
  ALSA: hdspm - Constrain periods to 2 on older cards

Al Viro (6):
  debugfs: leave freeing a symlink body until inode eviction
  autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for
    allocation
  sunrpc: fix braino in ->poll()
  gadgetfs: use-after-free in ->aio_read()
  ocfs2: _really_ sync the right range
  don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()

Alan Stern (3):
  USB: add flag for HCDs that can't receive wakeup requests
    (isp1760-hcd)
  USB: fix use-after-free bug in usb_hcd_unlink_urb()
  USB: usbfs: don't leak kernel data in siginfo

Aleksander Morgado (1):
  xhci: fix reporting of 0-sized URBs in control endpoint

Alex Deucher (6):
  drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessary
  drm/radeon: do a posting read in r100_set_irq
  drm/radeon: do a posting read in rs600_set_irq
  drm/radeon: do a posting read in r600_set_irq
  drm/radeon: do a posting read in evergreen_set_irq
  drm/radeon: do a posting read in si_set_irq

Alexandre Belloni (1):
  ARM: at91: pm: fix at91rm9200 standby

Andrey Ryabinin (1):
  smack: fix possible use after frees in task_security() callers

Andy Lutomirski (2):
  x86/asm/entry/64: Remove a bogus 'ret_from_fork' optimization
  x86/asm/entry/32: Fix user_mode() misuses

Arik Nemtsov (1):
  mac80211: set only VO as a U-APSD enabled AC

Bart Van Assche (1):
  Defer processing of REQ_PREEMPT requests for blocked devices

Ben Greear (1):
  Fix lockup related to stop_machine being stuck in __do_softirq.

Ben Hutchings (2):
  splice: Apply generic position and size checks to each write
  xen-pciback: Add name prefix to global 'permissive' variable

Benjamin Tissoires (1):
  Input: synaptics - handle spurious release of trackstick buttons

Bob Copeland (1):
  mac80211: drop unencrypted frames in mesh fwding

Brian King (1):
  bnx2x: Force fundamental reset for EEH recovery

Brian Silverman (1):
  sched: Fix RLIMIT_RTTIME when PI-boosting to RT

Chen Jie (1):
  jffs2: fix handling of corrupted summary length

Chris Wilson (1):
  ACPI / video: Load the module even if ACPI is disabled

Chuck Lever (1):
  xprtrdma: Free the pd if ib_query_qp() fails

Dan Carpenter (3):
  ALSA: off by one bug in snd_riptide_joystick_probe()
  tcm_fc: missing curly braces in ft_invl_hw_context()
  ipvs: uninitialized data with IP_VS_IPV6

Daniel Borkmann (1):
  rtnetlink: ifla_vf_policy: fix misuses of NLA_BINARY

Daniel Mack (1):
  ALSA: snd-usb: add quirks for Roland UA-22

Daniel Martin (1):
  Input: synaptics - query min dimensions for fw v8.1

Darrick J. Wong (2):
  dm io: reject unsupported DISCARD requests with EOPNOTSUPP
  dm io: deal with wandering queue limits when handling REQ_DISCARD and
    REQ_WRITE_SAME

David Disseldorp (1):
  cifs: fix use-after-free bug in find_writable_file

David Hildenbrand (1):
  KVM: s390: base hrtimer on a monotonic clock

David Miller (1):
  radeon: Do not directly dereference pointers to BIOS area.

Dmitry Eremin-Solenikov (4):
  ARM: pxa: add regulator_has_full_constraints to corgi board file
  ARM: pxa: add regulator_has_full_constraints to poodle board file
  ARM: pxa: add regulator_has_full_constraints to spitz board file
  ARM: 8284/1: sa1100: clear RCSR_SMR on resume

Dmitry M. Fedin (1):
  ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support

Dmitry Torokhov (1):
  Input: synaptics - fix middle button on Lenovo 2015 products

Dmitry Tunin (1):
  Bluetooth: ath3k: Add support of AR3012 bluetooth 13d3:3423 device

Doug Goldstein (2):
  USB: ftdi_sio: Added custom PID for Synapse Wireless product
  USB: ftdi_sio: Use jtag quirk for SNAP Connect E10

Eli Cohen (1):
  IB/core: Avoid leakage from kernel to user space

Eric Dumazet (2):
  netfilter: xt_socket: fix a stack corruption bug
  softirq: reduce latencies

Eric Nelson (1):
  ASoC: sgtl5000: remove useless register write clearing
    CHRGPUMP_POWERUP

Feng Tang (1):
  x86/reboot: Fix a warning message triggered by stop_other_cpus()

Florian Westphal (1):
  net: make skb_gso_segment error handling more robust

Grazvydas Ignotas (1):
  mm/memory.c: actually remap enough memory

Hui Wang (1):
  ALSA: hda - Add one more node in the EAPD supporting candidate list

Ian Abbott (2):
  staging: comedi: comedi_compat32.c: fix COMEDI_CMD copy back
  spi: spidev: fix possible arithmetic overflow for multi-transfer
    message

James Bottomley (1):
  libsas: Fix Kernel Crash in smp_execute_task

Jan Beulich (1):
  xen-pciback: limit guest control of command register

Jan Kara (1):
  fsnotify: fix handling of renames in audit

Jann Horn (1):
  fs: take i_mutex during prepare_binprm for set[ug]id executables

Jay Lan (1):
  kdb: fix incorrect counts in KDB summary command output

Jim Snow (1):
  sb_edac: Fix erroneous bytes->gigabytes conversion

Jiri Pirko (1):
  team: fix possible null pointer dereference in team_handle_frame

Jiri Slaby (2):
  tty: fix up atime/mtime mess, take four
  x86/vdso: Fix the build on GCC5

Joe Perches (1):
  selinux: fix sel_write_enforce broken return value

Johan Hovold (4):
  USB: serial: fix potential use-after-free after failed probe
  USB: serial: fix tty-device error handling at probe
  net: irda: fix wait_until_sent poll timeout
  TTY: fix tty_wait_until_sent on 64-bit machines

Johannes Berg (2):
  nl80211: ignore HT/VHT capabilities without QoS/WMM
  mac80211: fix RX A-MPDU session reorder timer deletion

John Soni Jose (1):
  be2iscsi: Fix kernel panic when device initialization fails

Joonsoo Kim (1):
  slub: refactoring unfreeze_partials()

Jouni Malinen (1):
  mac80211: Send EAPOL frames at lowest rate

Julian Anastasov (1):
  ipvs: add missing ip_vs_pe_put in sync code

Kirill A. Shutemov (1):
  perf tools: Fix build with perl 5.18

Konrad Rzeszutek Wilk (1):
  config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected

Lennart Sorensen (1):
  USB: cp210x: add ID for RUGGEDCOM USB Serial Console

Lu Baolu (2):
  usb: xhci: handle Config Error Change (CEC) in xhci driver
  usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers

Majd Dibbiny (1):
  IB/mlx4: Saturate RoCE port PMA counters in case of overflow

Malcolm Priestley (1):
  vt6655: RFbSetPower fix missing rate RATE_12M

Mark Glover (1):
  USB: ftdi_sio: add PIDs for Actisense USB devices

Markos Chandras (1):
  net: ethernet: pcnet32: Setup the SRAM and NOUFLO on Am79C97{3, 5}

Martin KaFai Lau (1):
  ipv6: fix ipv6_cow_metrics for non DST_HOST case

Martin Vajnar (1):
  hx4700: regulator: declare full constraints

Mathias Nyman (2):
  xhci: Allocate correct amount of scratchpad buffers
  xhci: Workaround for PME stuck issues in Intel xhci

Matthew Wilcox (1):
  axonram: Fix bug in direct_access

Max Mansfield (1):
  usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boards

Michael S. Tsirkin (2):
  virtio_console: init work unconditionally
  virtio_console: avoid config access from irq

Michal Kazior (1):
  mac80211: disable u-APSD queues by default

Michel Dänzer (1):
  PCI: Fix infinite loop with ROM image of size 0

Michiel vd Garde (1):
  USB: serial: cp210x: Adding Seletek device id's

Miklos Szeredi (2):
  fuse: notify: don't move pages
  fuse: set stolen page uptodate

Mikulas Patocka (5):
  cpufreq: speedstep-smi: enable interrupts when waiting
  dm mirror: do not degrade the mirror on discard error
  dm: fix a race condition in dm_get_md
  dm snapshot: fix a possible invalid memory access on unload
  dm: hold suspend_lock while suspending device during device deletion

Minh Duc Tran (1):
  fixed invalid assignment of 64bit mask to host dma_boundary for
    scatter gather segment boundary limit.

Mitko Haralanov (1):
  IB/qib: Do not write EEPROM

Naoya Horiguchi (3):
  mm/hugetlb: fix getting refcount 0 page in hugetlb_fault()
  mm/hugetlb: add migration/hwpoisoned entry check in
    hugetlb_change_protection
  mm/hugetlb: add migration entry check in __unmap_hugepage_range

Nicholas Bellinger (2):
  iscsi-target: Drop problematic active_ts_list usage
  target/pscsi: Fix NULL pointer dereference in get_device_type

Nicolas Pitre (1):
  vt: provide notifications on selection changes

Nicolas Saenz Julienne (1):
  gpio: tps65912: fix wrong container_of arguments

Oliver Hartkopp (1):
  can: add missing initialisations in CAN related skbuffs

Oliver Neukum (1):
  cdc-acm: add sanity checks

Paolo Bonzini (1):
  KVM: emulate: fix CMPXCHG8B on 32-bit hosts

Peter Hurley (2):
  tty: Prevent untrappable signals from malicious program
  console: Fix console name size mismatch

Peter Ujfalusi (1):
  ASoC: omap-pcm: Correct dma mask

Peter Zijlstra (1):
  perf: Fix irq_work 'tail' recursion

Pratyush Anand (1):
  ftrace: Fix en(dis)able graph caller when en(dis)abling record via
    sysctl

Pravin B Shelar (1):
  openvswitch: Check currect return value from skb_gso_segment()

Quentin Casasnovas (1):
  cdc-acm: prevent infinite loop when parsing CDC headers.

Ricardo Ribalda Delgado (1):
  PCI: Generate uppercase hex for modalias var in uevent

Roman Gushchin (2):
  mm/mmap.c: fix arithmetic overflow in __vm_enough_memory()
  mm/nommu.c: fix arithmetic overflow in __vm_enough_memory()

Russell King (1):
  Change email address for 8250_pci

Ryusuke Konishi (1):
  nilfs2: fix potential memory overrun on inode

Sasha Levin (1):
  autofs4: check dev ioctl size before allocating

Scott Wood (1):
  powerpc/mpc85xx: Add ranges to etsec2 nodes

Sebastian Andrzej Siewior (1):
  usb: core: buffer: smallest buffer should start at ARCH_DMA_MINALIGN

Sergei Antonov (1):
  hfsplus: fix B-tree corruption after insertion at position 0

Sergey Ryazanov (1):
  ath5k: fix spontaneus AR5312 freezes

Shachar Raindel (1):
  IB/uverbs: Prevent integer overflow in ib_umem_get address arithmetic

Stefan Lippers-Hollmann (1):
  x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirk

Stephan Mueller (1):
  crypto: aesni - fix memory usage in GCM decryption

Steven Rostedt (Red Hat) (1):
  ftrace: Fix ftrace enable ordering of sysctl ftrace_enabled

Sudip Mukherjee (1):
  nbd: fix possible memory leak

Takashi Iwai (11):
  ALSA: pcm: Don't leave PREPARED state after draining
  ALSA: control: Add sanity checks for user ctl id name string
  ASoC: adav80x: Fix wrong value references for boolean kctl
  ASoC: ak4641: Fix wrong value references for boolean kctl
  ASoC: cs4271: Fix wrong value references for boolean kctl
  ASoC: wm2000: Fix wrong value references for boolean kctl
  ASoC: wm8731: Fix wrong value references for boolean kctl
  ASoC: wm8903: Fix wrong value references for boolean kctl
  ASoC: wm8904: Fix wrong value references for boolean kctl
  ASoC: wm8955: Fix wrong value references for boolean kctl
  ASoC: wm8960: Fix wrong value references for boolean kctl

Tejun Heo (3):
  writeback: add missing INITIAL_JIFFIES init in
    global_update_bandwidth()
  writeback: fix possible underflow in write bandwidth calculation
  writeback: use |1 instead of +1 to protect against div by zero

Thomas Hellstrom (1):
  drm/vmwgfx: Reorder device takedown somewhat

Tomas Henzl (4):
  hpsa: refine the pci enable/disable handling
  hpsa: add missing pci_set_master in kdump path
  hpsa: turn off interrupts when kdump starts
  hpsa: fix memory leak in kdump hard reset

Tommi Rantala (1):
  drm/radeon: fix DRM_IOCTL_RADEON_CS oops

Tony Battersby (1):
  sg: fix read() error reporting

Trond Myklebust (2):
  NFSv4.1: Fix a kfree() of uninitialised pointers in
    decode_cb_sequence_args
  NFSv4: Don't call put_rpccred() under the rcu_read_lock()

Tyler Hicks (1):
  eCryptfs: don't pass fs-specific ioctl commands through

WANG Cong (1):
  net: use for_each_netdev_safe() in rtnl_group_changelink()

Yann Droneaud (1):
  IB/core: don't disallow registering region starting at 0x0

Yinghai Lu (1):
  PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a
    pci_dev

hujianyang (1):
  UBI: fix soft lockup in ubi_check_volume()

 arch/alpha/kernel/pci-sysfs.c                    |   4 +-
 arch/arm/mach-at91/pm.h                          |   2 +-
 arch/arm/mach-pxa/corgi.c                        |   3 +
 arch/arm/mach-pxa/hx4700.c                       |   2 +
 arch/arm/mach-pxa/poodle.c                       |   2 +
 arch/arm/mach-pxa/spitz.c                        |   2 +
 arch/arm/mach-sa1100/pm.c                        |   1 +
 arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi      |   1 +
 arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi      |   1 +
 arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi      |   1 +
 arch/powerpc/kernel/pci_of_scan.c                |   4 +-
 arch/powerpc/platforms/powernv/pci-ioda.c        |   4 +-
 arch/powerpc/sysdev/axonram.c                    |   2 +-
 arch/s390/kvm/kvm-s390.c                         |   2 +-
 arch/sparc/kernel/pci.c                          |  12 +-
 arch/x86/Kconfig                                 |   2 +-
 arch/x86/crypto/aesni-intel_glue.c               |   4 +-
 arch/x86/kernel/entry_64.S                       |  13 +-
 arch/x86/kernel/reboot.c                         |  18 ++-
 arch/x86/kernel/traps.c                          |   2 +-
 arch/x86/kvm/emulate.c                           |   3 +-
 arch/x86/vdso/vdso32/sigreturn.S                 |   1 +
 drivers/acpi/video.c                             |  11 ++
 drivers/block/nbd.c                              |   8 +-
 drivers/bluetooth/ath3k.c                        |   2 +
 drivers/bluetooth/btusb.c                        |   1 +
 drivers/char/virtio_console.c                    |  19 ++-
 drivers/cpufreq/speedstep-lib.c                  |   3 +
 drivers/cpufreq/speedstep-smi.c                  |  12 ++
 drivers/edac/sb_edac.c                           |  38 ++---
 drivers/gpio/gpio-tps65912.c                     |  14 +-
 drivers/gpu/drm/radeon/atombios_dp.c             |   4 +-
 drivers/gpu/drm/radeon/evergreen.c               |   3 +
 drivers/gpu/drm/radeon/r100.c                    |   4 +
 drivers/gpu/drm/radeon/r600.c                    |   3 +
 drivers/gpu/drm/radeon/radeon_bios.c             |  10 +-
 drivers/gpu/drm/radeon/radeon_cs.c               |   4 +-
 drivers/gpu/drm/radeon/rs600.c                   |   4 +
 drivers/gpu/drm/radeon/si.c                      |   3 +
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c              |  46 +++---
 drivers/infiniband/core/umem.c                   |   8 +
 drivers/infiniband/core/uverbs_main.c            |   1 +
 drivers/infiniband/hw/mlx4/mad.c                 |  20 ++-
 drivers/infiniband/hw/qib/qib.h                  |   9 +-
 drivers/infiniband/hw/qib/qib_eeprom.c           | 181 -----------------------
 drivers/infiniband/hw/qib/qib_iba6120.c          |   2 -
 drivers/infiniband/hw/qib/qib_iba7220.c          |   2 -
 drivers/infiniband/hw/qib/qib_iba7322.c          |   2 -
 drivers/infiniband/hw/qib/qib_init.c             |   1 -
 drivers/infiniband/hw/qib/qib_sysfs.c            |  24 ---
 drivers/input/mouse/synaptics.c                  |  73 +++++----
 drivers/md/dm-io.c                               |  14 +-
 drivers/md/dm-raid1.c                            |   9 ++
 drivers/md/dm-snap.c                             |   4 +-
 drivers/md/dm.c                                  |  33 ++---
 drivers/mtd/ubi/misc.c                           |   2 +
 drivers/net/can/dev.c                            |   5 +
 drivers/net/ethernet/amd/pcnet32.c               |  31 +++-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c |   4 +
 drivers/net/team/team.c                          |   4 +-
 drivers/net/wireless/ath/ath5k/reset.c           |   2 +-
 drivers/pci/hotplug.c                            |   2 +-
 drivers/pci/probe.c                              |  32 ++--
 drivers/pci/quirks.c                             |   2 +-
 drivers/pci/rom.c                                |   9 +-
 drivers/pci/setup-bus.c                          |  14 +-
 drivers/pci/setup-res.c                          |   2 +-
 drivers/pcmcia/i82092.c                          |   2 +-
 drivers/pcmcia/yenta_socket.c                    |   6 +-
 drivers/scsi/be2iscsi/be_main.c                  |   3 +-
 drivers/scsi/hpsa.c                              |  54 +++++--
 drivers/scsi/libsas/sas_discover.c               |   6 +-
 drivers/scsi/scsi_lib.c                          |   4 +-
 drivers/scsi/sg.c                                |   6 +-
 drivers/scsi/sym53c8xx_2/sym_glue.c              |   5 +-
 drivers/spi/spidev.c                             |   5 +-
 drivers/staging/comedi/comedi_compat32.c         |  12 +-
 drivers/staging/vt6655/rf.c                      |   1 +
 drivers/target/iscsi/iscsi_target_tq.c           |  28 +---
 drivers/target/target_core_pscsi.c               |   2 +-
 drivers/target/tcm_fc/tfc_io.c                   |   3 +-
 drivers/tty/pty.c                                |   3 +
 drivers/tty/serial/8250/8250_pci.c               |   2 +-
 drivers/tty/tty_io.c                             |   4 +-
 drivers/tty/tty_ioctl.c                          |  12 +-
 drivers/tty/vt/vt.c                              |   4 +-
 drivers/usb/class/cdc-acm.c                      |  26 +++-
 drivers/usb/core/buffer.c                        |  26 ++--
 drivers/usb/core/devio.c                         |   2 +
 drivers/usb/core/driver.c                        |  12 ++
 drivers/usb/core/hcd.c                           |  16 +-
 drivers/usb/core/usb.c                           |   1 +
 drivers/usb/gadget/inode.c                       |  15 +-
 drivers/usb/host/isp1760-hcd.c                   |   3 +
 drivers/usb/host/xhci-hub.c                      |   9 +-
 drivers/usb/host/xhci-pci.c                      |  33 ++++-
 drivers/usb/host/xhci-ring.c                     |  10 +-
 drivers/usb/host/xhci.h                          |   9 +-
 drivers/usb/serial/bus.c                         |  13 +-
 drivers/usb/serial/cp210x.c                      |   3 +
 drivers/usb/serial/ftdi_sio.c                    |  28 +++-
 drivers/usb/serial/ftdi_sio_ids.h                |  29 ++++
 drivers/video/arkfb.c                            |   2 +-
 drivers/video/s3fb.c                             |   2 +-
 drivers/video/vt8623fb.c                         |   2 +-
 drivers/xen/xen-pciback/conf_space.c             |   6 +-
 drivers/xen/xen-pciback/conf_space.h             |   2 +
 drivers/xen/xen-pciback/conf_space_header.c      |  61 ++++++--
 fs/autofs4/dev-ioctl.c                           |  11 +-
 fs/cifs/file.c                                   |   1 +
 fs/debugfs/inode.c                               |  34 ++---
 fs/ecryptfs/file.c                               |  34 ++++-
 fs/exec.c                                        |  65 ++++----
 fs/fuse/dev.c                                    |   7 +-
 fs/hfsplus/brec.c                                |  20 +--
 fs/jffs2/scan.c                                  |   5 +
 fs/namei.c                                       |   3 +-
 fs/nfs/callback_xdr.c                            |   4 +-
 fs/nfs/delegation.c                              |   2 +-
 fs/nilfs2/btree.c                                |  47 +++++-
 fs/ocfs2/file.c                                  |  22 ++-
 fs/splice.c                                      |   8 +-
 include/linux/blk_types.h                        |   4 +-
 include/linux/fsnotify.h                         |   6 +-
 include/linux/pci.h                              |   4 +-
 include/linux/usb/hcd.h                          |   2 +
 kernel/debug/kdb/kdb_main.c                      |   2 +-
 kernel/events/core.c                             |  10 ++
 kernel/printk.c                                  |   3 +-
 kernel/sched/core.c                              |   7 +-
 kernel/softirq.c                                 |  22 ++-
 kernel/trace/ftrace.c                            |  31 +++-
 mm/hugetlb.c                                     |  58 ++++++--
 mm/memory.c                                      |   2 +-
 mm/mmap.c                                        |   2 +-
 mm/nommu.c                                       |   2 +-
 mm/page-writeback.c                              |   9 +-
 mm/slub.c                                        |  48 ++----
 net/can/af_can.c                                 |   3 +
 net/core/rtnetlink.c                             |  16 +-
 net/ipv6/route.c                                 |   2 +-
 net/irda/ircomm/ircomm_tty.c                     |   4 +-
 net/mac80211/agg-rx.c                            |   8 +-
 net/mac80211/ieee80211_i.h                       |  24 ++-
 net/mac80211/rx.c                                |  10 +-
 net/mac80211/sta_info.h                          |   2 +
 net/mac80211/tx.c                                |   8 +-
 net/netfilter/ipvs/ip_vs_ftp.c                   |  10 +-
 net/netfilter/ipvs/ip_vs_sync.c                  |   3 +
 net/netfilter/nf_queue.c                         |   2 +-
 net/netfilter/xt_socket.c                        |  21 +--
 net/openvswitch/datapath.c                       |   6 +-
 net/sunrpc/cache.c                               |   2 +-
 net/sunrpc/xprtrdma/verbs.c                      |   8 +-
 net/wireless/nl80211.c                           |   8 +
 net/xfrm/xfrm_output.c                           |   2 +
 security/selinux/selinuxfs.c                     |   2 +-
 security/smack/smack.h                           |  10 ++
 security/smack/smack_lsm.c                       |  24 +--
 sound/core/control.c                             |   4 +
 sound/core/pcm_native.c                          |   2 +
 sound/pci/hda/patch_realtek.c                    |   2 +-
 sound/pci/riptide/riptide.c                      |  27 +++-
 sound/pci/rme9652/hdspm.c                        |   6 +
 sound/soc/codecs/adav80x.c                       |   4 +-
 sound/soc/codecs/ak4641.c                        |   4 +-
 sound/soc/codecs/cs4271.c                        |   4 +-
 sound/soc/codecs/sgtl5000.c                      |   8 +-
 sound/soc/codecs/wm2000.c                        |   8 +-
 sound/soc/codecs/wm8731.c                        |   4 +-
 sound/soc/codecs/wm8903.c                        |   4 +-
 sound/soc/codecs/wm8904.c                        |   4 +-
 sound/soc/codecs/wm8955.c                        |   4 +-
 sound/soc/codecs/wm8960.c                        |   4 +-
 sound/soc/omap/omap-pcm.c                        |   4 +-
 sound/usb/mixer_quirks.c                         |   1 +
 sound/usb/quirks-table.h                         |  30 ++++
 tools/perf/Makefile                              |   4 +-
 178 files changed, 1265 insertions(+), 752 deletions(-)

-- 
1.9.1

[PATCH 3.4 001/172] ARM: pxa: add regulator_has_full_constraints to corgi board file

[lizf]

From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 271e80176aae4e5b481f4bb92df9768c6075bbca upstream.

Add regulator_has_full_constraints() call to corgi board file to let
regulator core know that we do not have any additional regulators left.
This lets it substitute unprovided regulators with dummy ones.

This fixes the following warnings that can be seen on corgi if
regulators are enabled:

ads7846 spi1.0: unable to get regulator: -517
spi spi1.0: Driver ads7846 requests probe deferral
wm8731 0-001b: Failed to get supply 'AVDD': -517
wm8731 0-001b: Failed to request supplies: -517
wm8731 0-001b: ASoC: failed to probe component -517
corgi-audio corgi-audio: ASoC: failed to instantiate card -517

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/arm/mach-pxa/corgi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index c1fe32d..f801fe8 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/io.h>
+#include <linux/regulator/machine.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
@@ -711,6 +712,8 @@ static void __init corgi_init(void)
 		sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	regulator_has_full_constraints();
 }
 
 static void __init fixup_corgi(struct tag *tags, char **cmdline,
-- 
1.9.1

[PATCH 3.4 002/172] ARM: pxa: add regulator_has_full_constraints to poodle board file

[lizf]

From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 9bc78f32c2e430aebf6def965b316aa95e37a20c upstream.

Add regulator_has_full_constraints() call to poodle board file to let
regulator core know that we do not have any additional regulators left.
This lets it substitute unprovided regulators with dummy ones.

This fixes the following warnings that can be seen on poodle if
regulators are enabled:

ads7846 spi1.0: unable to get regulator: -517
spi spi1.0: Driver ads7846 requests probe deferral
wm8731 0-001b: Failed to get supply 'AVDD': -517
wm8731 0-001b: Failed to request supplies: -517
wm8731 0-001b: ASoC: failed to probe component -517

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/arm/mach-pxa/poodle.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 89d98c8..39d1068 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <linux/regulator/machine.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/pxa2xx_spi.h>
@@ -452,6 +453,7 @@ static void __init poodle_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
 	poodle_init_spi();
+	regulator_has_full_constraints();
 }
 
 static void __init fixup_poodle(struct tag *tags, char **cmdline,
-- 
1.9.1

[PATCH 3.4 003/172] ARM: pxa: add regulator_has_full_constraints to spitz board file

[lizf]

From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit baad2dc49c5d970ea881d92981a1b76c94a7b7a1 upstream.

Add regulator_has_full_constraints() call to spitz board file to let
regulator core know that we do not have any additional regulators left.
This lets it substitute unprovided regulators with dummy ones.

This fixes the following warnings that can be seen on spitz if
regulators are enabled:

ads7846 spi2.0: unable to get regulator: -517
spi spi2.0: Driver ads7846 requests probe deferral

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/arm/mach-pxa/spitz.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index df2ab0f..a1647d0 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -968,6 +968,8 @@ static void __init spitz_init(void)
 	spitz_nor_init();
 	spitz_nand_init();
 	spitz_i2c_init();
+
+	regulator_has_full_constraints();
 }
 
 static void __init spitz_fixup(struct tag *tags, char **cmdline,
-- 
1.9.1

[PATCH 3.4 004/172] hx4700: regulator: declare full constraints

[lizf]

From: Martin Vajnar <martin.vajnar@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit a52d209336f8fc7483a8c7f4a8a7d2a8e1692a6c upstream.

Since the removal of CONFIG_REGULATOR_DUMMY option, the touchscreen stopped
working. This patch enables the "replacement" for REGULATOR_DUMMY and
allows the touchscreen to work even though there is no regulator for "vcc".

Signed-off-by: Martin Vajnar <martin.vajnar@gmail.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/arm/mach-pxa/hx4700.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index b83b95a..f35a30f 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -881,6 +881,8 @@ static void __init hx4700_init(void)
 	mdelay(10);
 	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
 	mdelay(10);
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(H4700, "HP iPAQ HX4700")
-- 
1.9.1

[PATCH 3.4 005/172] PCI: Generate uppercase hex for modalias var in uevent

[lizf]

From: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 145b3fe579db66fbe999a2bc3fd5b63dffe9636d upstream.

Some implementations of modprobe fail to load the driver for a PCI device
automatically because the "interface" part of the modalias from the kernel
is lowercase, and the modalias from file2alias is uppercase.

The "interface" is the low-order byte of the Class Code, defined in PCI
r3.0, Appendix D.  Most interface types defined in the spec do not use
alpha characters, so they won't be affected.  For example, 00h, 01h, 10h,
20h, etc. are unaffected.

Print the "interface" byte of the Class Code in uppercase hex, as we
already do for the Vendor ID, Device ID, Class, etc.

Commit 89ec3dcf17fd ("PCI: Generate uppercase hex for modalias interface
class") fixed only half of the problem.  Some udev implementations rely on
the uevent file and not the modalias file.

Fixes: d1ded203adf1 ("PCI: add MODALIAS to hotplug event for pci devices")
Fixes: 89ec3dcf17fd ("PCI: Generate uppercase hex for modalias interface class")
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[lizf: Backported to 3.4: adjust filename]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/pci/hotplug.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/hotplug.c b/drivers/pci/hotplug.c
index 2b5352a..3b70f5c 100644
--- a/drivers/pci/hotplug.c
+++ b/drivers/pci/hotplug.c
@@ -27,7 +27,7 @@ int pci_uevent(struct device *dev, struct kobj_uevent_env *env)
 	if (add_uevent_var(env, "PCI_SLOT_NAME=%s", pci_name(pdev)))
 		return -ENOMEM;
 
-	if (add_uevent_var(env, "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x",
+	if (add_uevent_var(env, "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02X",
 			   pdev->vendor, pdev->device,
 			   pdev->subsystem_vendor, pdev->subsystem_device,
 			   (u8)(pdev->class >> 16), (u8)(pdev->class >> 8),
-- 
1.9.1

[PATCH 3.4 006/172] usb: core: buffer: smallest buffer should start at ARCH_DMA_MINALIGN

[lizf]

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 5efd2ea8c9f4f12916ffc8ba636792ce052f6911 upstream.

the following error pops up during "testusb -a -t 10"
| musb-hdrc musb-hdrc.1.auto: dma_pool_free buffer-128,	f134e000/be842000 (bad dma)
hcd_buffer_create() creates a few buffers, the smallest has 32 bytes of
size. ARCH_KMALLOC_MINALIGN is set to 64 bytes. This combo results in
hcd_buffer_alloc() returning memory which is 32 bytes aligned and it
might by identified by buffer_offset() as another buffer. This means the
buffer which is on a 32 byte boundary will not get freed, instead it
tries to free another buffer with the error message.

This patch fixes the issue by creating the smallest DMA buffer with the
size of ARCH_KMALLOC_MINALIGN (or 32 in case ARCH_KMALLOC_MINALIGN is
smaller). This might be 32, 64 or even 128 bytes. The next three pools
will have the size 128, 512 and 2048.
In case the smallest pool is 128 bytes then we have only three pools
instead of four (and zero the first entry in the array).
The last pool size is always 2048 bytes which is the assumed PAGE_SIZE /
2 of 4096. I doubt it makes sense to continue using PAGE_SIZE / 2 where
we would end up with 8KiB buffer in case we have 16KiB pages.
Instead I think it makes sense to have a common size(s) and extend them
if there is need to.
There is a BUILD_BUG_ON() now in case someone has a minalign of more than
128 bytes.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/core/buffer.c | 26 +++++++++++++++++---------
 drivers/usb/core/usb.c    |  1 +
 include/linux/usb/hcd.h   |  1 +
 3 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index b0585e6..19fa68a 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -22,17 +22,25 @@
  */
 
 /* FIXME tune these based on pool statistics ... */
-static const size_t	pool_max[HCD_BUFFER_POOLS] = {
-	/* platforms without dma-friendly caches might need to
-	 * prevent cacheline sharing...
-	 */
-	32,
-	128,
-	512,
-	PAGE_SIZE / 2
-	/* bigger --> allocate pages */
+static size_t pool_max[HCD_BUFFER_POOLS] = {
+	32, 128, 512, 2048,
 };
 
+void __init usb_init_pool_max(void)
+{
+	/*
+	 * The pool_max values must never be smaller than
+	 * ARCH_KMALLOC_MINALIGN.
+	 */
+	if (ARCH_KMALLOC_MINALIGN <= 32)
+		;			/* Original value is okay */
+	else if (ARCH_KMALLOC_MINALIGN <= 64)
+		pool_max[0] = 64;
+	else if (ARCH_KMALLOC_MINALIGN <= 128)
+		pool_max[0] = 0;	/* Don't use this pool */
+	else
+		BUILD_BUG();		/* We don't allow this */
+}
 
 /* SETUP primitives */
 
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index c74ba7b..8966960 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1010,6 +1010,7 @@ static int __init usb_init(void)
 		pr_info("%s: USB support disabled\n", usbcore_name);
 		return 0;
 	}
+	usb_init_pool_max();
 
 	retval = usb_debugfs_init();
 	if (retval)
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 815cc4b..6674ec0 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -399,6 +399,7 @@ extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
 #endif /* CONFIG_PCI */
 
 /* pci-ish (pdev null is ok) buffer alloc/mapping support */
+void usb_init_pool_max(void);
 int hcd_buffer_create(struct usb_hcd *hcd);
 void hcd_buffer_destroy(struct usb_hcd *hcd);
 
-- 
1.9.1

[PATCH 3.4 007/172] axonram: Fix bug in direct_access

[lizf]

From: Matthew Wilcox <matthew.r.wilcox@intel.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 91117a20245b59f70b563523edbf998a62fc6383 upstream.

The 'pfn' returned by axonram was completely bogus, and has been since
2008.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/powerpc/sysdev/axonram.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 1c16141..1fea249 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -155,7 +155,7 @@ axon_ram_direct_access(struct block_device *device, sector_t sector,
 	}
 
 	*kaddr = (void *)(bank->ph_addr + offset);
-	*pfn = virt_to_phys(kaddr) >> PAGE_SHIFT;
+	*pfn = virt_to_phys(*kaddr) >> PAGE_SHIFT;
 
 	return 0;
 }
-- 
1.9.1

[PATCH 3.4 008/172] Bluetooth: ath3k: Add support of AR3012 bluetooth 13d3:3423 device

[lizf]

From: Dmitry Tunin <hanipouspilot@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 033efa920a7f22a8caf7a38d851a2f451781bbf7 upstream.

Add support of 13d3:3423 device.

BugLink: https://bugs.launchpad.net/bugs/1411193

T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3423 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/bluetooth/ath3k.c | 2 ++
 drivers/bluetooth/btusb.c | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 02fbbf7..8a084bf 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -101,6 +101,7 @@ static struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3393) },
 	{ USB_DEVICE(0x13d3, 0x3402) },
 	{ USB_DEVICE(0x13d3, 0x3408) },
+	{ USB_DEVICE(0x13d3, 0x3423) },
 	{ USB_DEVICE(0x13d3, 0x3432) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
@@ -149,6 +150,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index ddb2b87..7c0b21e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -179,6 +179,7 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
-- 
1.9.1

[PATCH 3.4 009/172] smack: fix possible use after frees in task_security() callers

[lizf]

From: Andrey Ryabinin <a.ryabinin@samsung.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 6d1cff2a885850b78b40c34777b46cf5da5d1050 upstream.

We hit use after free on dereferncing pointer to task_smack struct in
smk_of_task() called from smack_task_to_inode().

task_security() macro uses task_cred_xxx() to get pointer to the task_smack.
task_cred_xxx() could be used only for non-pointer members of task's
credentials. It cannot be used for pointer members since what they point
to may disapper after dropping RCU read lock.

Mainly task_security() used this way:
	smk_of_task(task_security(p))

Intead of this introduce function smk_of_task_struct() which
takes task_struct as argument and returns pointer to smk_known struct
and do this under RCU read lock.
Bogus task_security() macro is not used anymore, so remove it.

KASan's report for this:

	AddressSanitizer: use after free in smack_task_to_inode+0x50/0x70 at addr c4635600
	=============================================================================
	BUG kmalloc-64 (Tainted: PO): kasan error
	-----------------------------------------------------------------------------

	Disabling lock debugging due to kernel taint
	INFO: Allocated in new_task_smack+0x44/0xd8 age=39 cpu=0 pid=1866
		kmem_cache_alloc_trace+0x88/0x1bc
		new_task_smack+0x44/0xd8
		smack_cred_prepare+0x48/0x21c
		security_prepare_creds+0x44/0x4c
		prepare_creds+0xdc/0x110
		smack_setprocattr+0x104/0x150
		security_setprocattr+0x4c/0x54
		proc_pid_attr_write+0x12c/0x194
		vfs_write+0x1b0/0x370
		SyS_write+0x5c/0x94
		ret_fast_syscall+0x0/0x48
	INFO: Freed in smack_cred_free+0xc4/0xd0 age=27 cpu=0 pid=1564
		kfree+0x270/0x290
		smack_cred_free+0xc4/0xd0
		security_cred_free+0x34/0x3c
		put_cred_rcu+0x58/0xcc
		rcu_process_callbacks+0x738/0x998
		__do_softirq+0x264/0x4cc
		do_softirq+0x94/0xf4
		irq_exit+0xbc/0x120
		handle_IRQ+0x104/0x134
		gic_handle_irq+0x70/0xac
		__irq_svc+0x44/0x78
		_raw_spin_unlock+0x18/0x48
		sync_inodes_sb+0x17c/0x1d8
		sync_filesystem+0xac/0xfc
		vdfs_file_fsync+0x90/0xc0
		vfs_fsync_range+0x74/0x7c
	INFO: Slab 0xd3b23f50 objects=32 used=31 fp=0xc4635600 flags=0x4080
	INFO: Object 0xc4635600 @offset=5632 fp=0x  (null)

	Bytes b4 c46355f0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
	Object c4635600: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
	Object c4635610: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
	Object c4635620: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
	Object c4635630: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5  kkkkkkkkkkkkkkk.
	Redzone c4635640: bb bb bb bb                                      ....
	Padding c46356e8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
	Padding c46356f8: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ
	CPU: 5 PID: 834 Comm: launchpad_prelo Tainted: PBO 3.10.30 #1
	Backtrace:
	[<c00233a4>] (dump_backtrace+0x0/0x158) from [<c0023dec>] (show_stack+0x20/0x24)
	 r7:c4634010 r6:d3b23f50 r5:c4635600 r4:d1002140
	[<c0023dcc>] (show_stack+0x0/0x24) from [<c06d6d7c>] (dump_stack+0x20/0x28)
	[<c06d6d5c>] (dump_stack+0x0/0x28) from [<c01c1d50>] (print_trailer+0x124/0x144)
	[<c01c1c2c>] (print_trailer+0x0/0x144) from [<c01c1e88>] (object_err+0x3c/0x44)
	 r7:c4635600 r6:d1002140 r5:d3b23f50 r4:c4635600
	[<c01c1e4c>] (object_err+0x0/0x44) from [<c01cac18>] (kasan_report_error+0x2b8/0x538)
	 r6:d1002140 r5:d3b23f50 r4:c6429cf8 r3:c09e1aa7
	[<c01ca960>] (kasan_report_error+0x0/0x538) from [<c01c9430>] (__asan_load4+0xd4/0xf8)
	[<c01c935c>] (__asan_load4+0x0/0xf8) from [<c031e168>] (smack_task_to_inode+0x50/0x70)
	 r5:c4635600 r4:ca9da000
	[<c031e118>] (smack_task_to_inode+0x0/0x70) from [<c031af64>] (security_task_to_inode+0x3c/0x44)
	 r5:cca25e80 r4:c0ba9780
	[<c031af28>] (security_task_to_inode+0x0/0x44) from [<c023d614>] (pid_revalidate+0x124/0x178)
	 r6:00000000 r5:cca25e80 r4:cbabe3c0 r3:00008124
	[<c023d4f0>] (pid_revalidate+0x0/0x178) from [<c01db98c>] (lookup_fast+0x35c/0x43y4)
	 r9:c6429efc r8:00000101 r7:c079d940 r6:c6429e90 r5:c6429ed8 r4:c83c4148
	[<c01db630>] (lookup_fast+0x0/0x434) from [<c01deec8>] (do_last.isra.24+0x1c0/0x1108)
	[<c01ded08>] (do_last.isra.24+0x0/0x1108) from [<c01dff04>] (path_openat.isra.25+0xf4/0x648)
	[<c01dfe10>] (path_openat.isra.25+0x0/0x648) from [<c01e1458>] (do_filp_open+0x3c/0x88)
	[<c01e141c>] (do_filp_open+0x0/0x88) from [<c01ccb28>] (do_sys_open+0xf0/0x198)
	 r7:00000001 r6:c0ea2180 r5:0000000b r4:00000000
	[<c01cca38>] (do_sys_open+0x0/0x198) from [<c01ccc00>] (SyS_open+0x30/0x34)
	[<c01ccbd0>] (SyS_open+0x0/0x34) from [<c001db80>] (ret_fast_syscall+0x0/0x48)
	Read of size 4 by thread T834:
	Memory state around the buggy address:
	 c4635380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
	 c4635400: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
	 c4635480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
	 c4635500: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
	 c4635580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
	>c4635600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
	           ^
	 c4635680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
	 c4635700: 00 00 00 00 04 fc fc fc fc fc fc fc fc fc fc fc
	 c4635780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
	 c4635800: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc
	 c4635880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
	==================================================================

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
[lizf: Backported to 3.4:
 - smk_of_task() returns char* instead of smack_known *
 - replace task_security() with smk_of_task() with smk_of_task_struct()
   manually]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 security/smack/smack.h     | 10 ++++++++++
 security/smack/smack_lsm.c | 24 +++++++++++++-----------
 2 files changed, 23 insertions(+), 11 deletions(-)

diff --git a/security/smack/smack.h b/security/smack/smack.h
index 4ede719..cde4cc1 100644
--- a/security/smack/smack.h
+++ b/security/smack/smack.h
@@ -298,6 +298,16 @@ static inline char *smk_of_current(void)
 	return smk_of_task(current_security());
 }
 
+static inline char *smk_of_task_struct(const struct task_struct *t)
+{
+	char *skp;
+
+	rcu_read_lock();
+	skp = smk_of_task(__task_cred(t)->security);
+	rcu_read_unlock();
+	return skp;
+}
+
 /*
  * logging functions
  */
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 45c32f0..82df24d 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -41,8 +41,6 @@
 #include <linux/binfmts.h>
 #include "smack.h"
 
-#define task_security(task)	(task_cred_xxx((task), security))
-
 #define TRANS_TRUE	"TRUE"
 #define TRANS_TRUE_SIZE	4
 
@@ -164,7 +162,7 @@ static int smack_ptrace_access_check(struct task_struct *ctp, unsigned int mode)
 	if (rc != 0)
 		return rc;
 
-	tsp = smk_of_task(task_security(ctp));
+	tsp = smk_of_task_struct(ctp);
 	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK);
 	smk_ad_setfield_u_tsk(&ad, ctp);
 
@@ -190,7 +188,7 @@ static int smack_ptrace_traceme(struct task_struct *ptp)
 	if (rc != 0)
 		return rc;
 
-	tsp = smk_of_task(task_security(ptp));
+	tsp = smk_of_task_struct(ptp);
 	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK);
 	smk_ad_setfield_u_tsk(&ad, ptp);
 
@@ -1518,7 +1516,7 @@ static int smk_curacc_on_task(struct task_struct *p, int access,
 
 	smk_ad_init(&ad, caller, LSM_AUDIT_DATA_TASK);
 	smk_ad_setfield_u_tsk(&ad, p);
-	return smk_curacc(smk_of_task(task_security(p)), access, &ad);
+	return smk_curacc(smk_of_task_struct(p), access, &ad);
 }
 
 /**
@@ -1564,7 +1562,7 @@ static int smack_task_getsid(struct task_struct *p)
  */
 static void smack_task_getsecid(struct task_struct *p, u32 *secid)
 {
-	*secid = smack_to_secid(smk_of_task(task_security(p)));
+	*secid = smack_to_secid(smk_of_task_struct(p));
 }
 
 /**
@@ -1676,7 +1674,7 @@ static int smack_task_kill(struct task_struct *p, struct siginfo *info,
 	 * can write the receiver.
 	 */
 	if (secid == 0)
-		return smk_curacc(smk_of_task(task_security(p)), MAY_WRITE,
+		return smk_curacc(smk_of_task_struct(p), MAY_WRITE,
 				  &ad);
 	/*
 	 * If the secid isn't 0 we're dealing with some USB IO
@@ -1684,7 +1682,7 @@ static int smack_task_kill(struct task_struct *p, struct siginfo *info,
 	 * we can't take privilege into account.
 	 */
 	return smk_access(smack_from_secid(secid),
-			  smk_of_task(task_security(p)), MAY_WRITE, &ad);
+			  smk_of_task_struct(p), MAY_WRITE, &ad);
 }
 
 /**
@@ -1697,9 +1695,13 @@ static int smack_task_wait(struct task_struct *p)
 {
 	struct smk_audit_info ad;
 	char *sp = smk_of_current();
-	char *tsp = smk_of_forked(task_security(p));
+	char *tsp;
 	int rc;
 
+	rcu_read_lock();
+	tsp = smk_of_forked(__task_cred(p)->security);
+	rcu_read_unlock();
+
 	/* we don't log here, we can be overriden */
 	rc = smk_access(tsp, sp, MAY_WRITE, NULL);
 	if (rc == 0)
@@ -1736,7 +1738,7 @@ static int smack_task_wait(struct task_struct *p)
 static void smack_task_to_inode(struct task_struct *p, struct inode *inode)
 {
 	struct inode_smack *isp = inode->i_security;
-	isp->smk_inode = smk_of_task(task_security(p));
+	isp->smk_inode = smk_of_task_struct(p);
 }
 
 /*
@@ -2719,7 +2721,7 @@ static int smack_getprocattr(struct task_struct *p, char *name, char **value)
 	if (strcmp(name, "current") != 0)
 		return -EINVAL;
 
-	cp = kstrdup(smk_of_task(task_security(p)), GFP_KERNEL);
+	cp = kstrdup(smk_of_task_struct(p), GFP_KERNEL);
 	if (cp == NULL)
 		return -ENOMEM;
 
-- 
1.9.1

[PATCH 3.4 010/172] KVM: s390: base hrtimer on a monotonic clock

[lizf]

From: David Hildenbrand <dahi@linux.vnet.ibm.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 0ac96caf0f9381088c673a16d910b1d329670edf upstream.

The hrtimer that handles the wait with enabled timer interrupts
should not be disturbed by changes of the host time.

This patch changes our hrtimer to be based on a monotonic clock.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/s390/kvm/kvm-s390.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 0f250d1..7e6ac1f 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -347,7 +347,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 	vcpu->arch.sie_block->ecb   = 6;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
 	vcpu->arch.sie_block->fac   = (int) (long) facilities;
-	hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+	hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet,
 		     (unsigned long) vcpu);
 	vcpu->arch.ckc_timer.function = kvm_s390_idle_wakeup;
-- 
1.9.1

[PATCH 3.4 011/172] PCI: Fix infinite loop with ROM image of size 0

[lizf]

From: Michel Dänzer <michel.daenzer@amd.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 16b036af31e1456cb69243a5a0c9ef801ecd1f17 upstream.

If the image size would ever read as 0, pci_get_rom_size() could keep
processing the same image over and over again.  Exit the loop if we ever
read a length of zero.

This fixes a soft lockup on boot when the radeon driver calls
pci_get_rom_size() on an AMD Radeon R7 250X PCIe discrete graphics card.

[bhelgaas: changelog, reference]
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1386973
Reported-by: Federico <federicotg@gmail.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/pci/rom.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index 48ebdb2..e31659c 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -69,6 +69,7 @@ size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size)
 {
 	void __iomem *image;
 	int last_image;
+	unsigned length;
 
 	image = rom;
 	do {
@@ -91,9 +92,9 @@ size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size)
 		if (readb(pds + 3) != 'R')
 			break;
 		last_image = readb(pds + 21) & 0x80;
-		/* this length is reliable */
-		image += readw(pds + 16) * 512;
-	} while (!last_image);
+		length = readw(pds + 16);
+		image += length * 512;
+	} while (length && !last_image);
 
 	/* never return a size larger than the PCI resource window */
 	/* there are known ROMs that get the size wrong */
-- 
1.9.1

[PATCH 3.4 012/172] USB: cp210x: add ID for RUGGEDCOM USB Serial Console

[lizf]

From: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit a6f0331236fa75afba14bbcf6668d42cebb55c43 upstream.

Added the USB serial console device ID for Siemens Ruggedcom devices
which have a USB port for their serial console.

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/serial/cp210x.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 8137937..a455343 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -63,6 +63,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
 	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
 	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
+	{ USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
 	{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
 	{ USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
 	{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
-- 
1.9.1

[PATCH 3.4 013/172] staging: comedi: comedi_compat32.c: fix COMEDI_CMD copy back

[lizf]

From: Ian Abbott <abbotti@mev.co.uk>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 42b8ce6f55facfa101462e694d33fc6bca471138 upstream.

`do_cmd_ioctl()` in "comedi_fops.c" handles the `COMEDI_CMD` ioctl.
This returns `-EAGAIN` if it has copied a modified `struct comedi_cmd`
back to user-space.  (This occurs when the low-level Comedi driver's
`do_cmdtest()` handler returns non-zero to indicate a problem with the
contents of the `struct comedi_cmd`, or when the `struct comedi_cmd` has
the `CMDF_BOGUS` flag set.)

`compat_cmd()` in "comedi_compat32.c" handles the 32-bit compatible
version of the `COMEDI_CMD` ioctl.  Currently, it never copies a 32-bit
compatible version of `struct comedi_cmd` back to user-space, which is
at odds with the way the regular `COMEDI_CMD` ioctl is handled.  To fix
it, change `compat_cmd()` to copy a 32-bit compatible version of the
`struct comedi_cmd` back to user-space when the main ioctl handler
returns `-EAGAIN`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/staging/comedi/comedi_compat32.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/comedi/comedi_compat32.c b/drivers/staging/comedi/comedi_compat32.c
index 41a7a62..a8a0c0f 100644
--- a/drivers/staging/comedi/comedi_compat32.c
+++ b/drivers/staging/comedi/comedi_compat32.c
@@ -271,7 +271,7 @@ static int compat_cmd(struct file *file, unsigned long arg)
 {
 	struct comedi_cmd __user *cmd;
 	struct comedi32_cmd_struct __user *cmd32;
-	int rc;
+	int rc, err;
 
 	cmd32 = compat_ptr(arg);
 	cmd = compat_alloc_user_space(sizeof(*cmd));
@@ -280,7 +280,15 @@ static int compat_cmd(struct file *file, unsigned long arg)
 	if (rc)
 		return rc;
 
-	return translated_ioctl(file, COMEDI_CMD, (unsigned long)cmd);
+	rc = translated_ioctl(file, COMEDI_CMD, (unsigned long)cmd);
+	if (rc == -EAGAIN) {
+		/* Special case: copy cmd back to user. */
+		err = put_compat_cmd(cmd32, cmd);
+		if (err)
+			rc = err;
+	}
+
+	return rc;
 }
 
 /* Handle 32-bit COMEDI_CMDTEST ioctl. */
-- 
1.9.1

[PATCH 3.4 014/172] ARM: 8284/1: sa1100: clear RCSR_SMR on resume

[lizf]

From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit e461894dc2ce7778ccde1c3483c9b15a85a7fc5f upstream.

StrongARM core uses RCSR SMR bit to tell to bootloader that it was reset
by entering the sleep mode. After we have resumed, there is little point
in having that bit enabled. Moreover, if this bit is set before reboot,
the bootloader can become confused. Thus clear the SMR bit on resume
just before clearing the scratchpad (resume address) register.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/arm/mach-sa1100/pm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 2fa499e..69bbe4e 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -80,6 +80,7 @@ static int sa11x0_pm_enter(suspend_state_t state)
 	/*
 	 * Ensure not to come back here if it wasn't intended
 	 */
+	RCSR = RCSR_SMR;
 	PSPR = 0;
 
 	/*
-- 
1.9.1

[PATCH 3.4 015/172] xprtrdma: Free the pd if ib_query_qp() fails

[lizf]

From: Chuck Lever <chuck.lever@oracle.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 5ae711a24601257f395c1f8746ac95be0cbd75e5 upstream.

If ib_query_qp() fails or the memory registration mode isn't
supported, don't leak the PD. An orphaned IB/core resource will
cause IB module removal to hang.

Fixes: bd7ed1d13304 ("RPC/RDMA: check selected memory registration ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
[lizf: Backported to 3.4: only two goto statements need to be changed]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/sunrpc/xprtrdma/verbs.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 745973b..5547bd8 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -485,7 +485,7 @@ rpcrdma_ia_open(struct rpcrdma_xprt *xprt, struct sockaddr *addr, int memreg)
 	if (rc) {
 		dprintk("RPC:       %s: ib_query_device failed %d\n",
 			__func__, rc);
-		goto out2;
+		goto out3;
 	}
 
 	if (devattr.device_cap_flags & IB_DEVICE_LOCAL_DMA_LKEY) {
@@ -587,7 +587,7 @@ rpcrdma_ia_open(struct rpcrdma_xprt *xprt, struct sockaddr *addr, int memreg)
 		printk(KERN_ERR "%s: invalid memory registration mode %d\n",
 				__func__, memreg);
 		rc = -EINVAL;
-		goto out2;
+		goto out3;
 	}
 	dprintk("RPC:       %s: memory registration strategy is %d\n",
 		__func__, memreg);
@@ -596,6 +596,10 @@ rpcrdma_ia_open(struct rpcrdma_xprt *xprt, struct sockaddr *addr, int memreg)
 	ia->ri_memreg_strategy = memreg;
 
 	return 0;
+
+out3:
+	ib_dealloc_pd(ia->ri_pd);
+	ia->ri_pd = NULL;
 out2:
 	rdma_destroy_id(ia->ri_id);
 	ia->ri_id = NULL;
-- 
1.9.1

[PATCH 3.4 016/172] cdc-acm: add sanity checks

[lizf]

From: Oliver Neukum <oneukum@suse.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 7e860a6e7aa62b337a61110430cd633db5b0d2dd upstream.

Check the special CDC headers for a plausible minimum length.
Another big operating systems ignores such garbage.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Reviewed-by: Adam Lee <adam8157@gmail.com>
Tested-by: Adam Lee <adam8157@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/class/cdc-acm.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 0532577..57877a9 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1008,6 +1008,7 @@ static int acm_probe(struct usb_interface *intf,
 	unsigned long quirks;
 	int num_rx_buf;
 	int i;
+	unsigned int elength = 0;
 	int combined_interfaces = 0;
 
 	/* normal quirks */
@@ -1047,9 +1048,12 @@ static int acm_probe(struct usb_interface *intf,
 			dev_err(&intf->dev, "skipping garbage\n");
 			goto next_desc;
 		}
+		elength = buffer[0];
 
 		switch (buffer[2]) {
 		case USB_CDC_UNION_TYPE: /* we've found it */
+			if (elength < sizeof(struct usb_cdc_union_desc))
+				goto next_desc;
 			if (union_header) {
 				dev_err(&intf->dev, "More than one "
 					"union descriptor, skipping ...\n");
@@ -1058,31 +1062,38 @@ static int acm_probe(struct usb_interface *intf,
 			union_header = (struct usb_cdc_union_desc *)buffer;
 			break;
 		case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/
+			if (elength < sizeof(struct usb_cdc_country_functional_desc))
+				goto next_desc;
 			cfd = (struct usb_cdc_country_functional_desc *)buffer;
 			break;
 		case USB_CDC_HEADER_TYPE: /* maybe check version */
 			break; /* for now we ignore it */
 		case USB_CDC_ACM_TYPE:
+			if (elength < 4)
+				goto next_desc;
 			ac_management_function = buffer[3];
 			break;
 		case USB_CDC_CALL_MANAGEMENT_TYPE:
+			if (elength < 5)
+				goto next_desc;
 			call_management_function = buffer[3];
 			call_interface_num = buffer[4];
 			if ( (quirks & NOT_A_MODEM) == 0 && (call_management_function & 3) != 3)
 				dev_err(&intf->dev, "This device cannot do calls on its own. It is not a modem.\n");
 			break;
 		default:
-			/* there are LOTS more CDC descriptors that
+			/*
+			 * there are LOTS more CDC descriptors that
 			 * could legitimately be found here.
 			 */
 			dev_dbg(&intf->dev, "Ignoring descriptor: "
-					"type %02x, length %d\n",
-					buffer[2], buffer[0]);
+					"type %02x, length %ud\n",
+					buffer[2], elength);
 			break;
 		}
 next_desc:
-		buflen -= buffer[0];
-		buffer += buffer[0];
+		buflen -= elength;
+		buffer += elength;
 	}
 
 	if (!union_header) {
-- 
1.9.1

[PATCH 3.4 017/172] USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd)

[lizf]

From: Alan Stern <stern@rowland.harvard.edu>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 074f9dd55f9cab1b82690ed7e44bcf38b9616ce0 upstream.

Currently the USB stack assumes that all host controller drivers are
capable of receiving wakeup requests from downstream devices.
However, this isn't true for the isp1760-hcd driver, which means that
it isn't safe to do a runtime suspend of any device attached to a
root-hub port if the device requires wakeup.

This patch adds a "cant_recv_wakeups" flag to the usb_hcd structure
and sets the flag in isp1760-hcd.  The core is modified to prevent a
direct child of the root hub from being put into runtime suspend with
wakeup enabled if the flag is set.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/core/driver.c      | 12 ++++++++++++
 drivers/usb/host/isp1760-hcd.c |  3 +++
 include/linux/usb/hcd.h        |  1 +
 3 files changed, 16 insertions(+)

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 35bc3ba..621ea00 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1686,6 +1686,18 @@ static int autosuspend_check(struct usb_device *udev)
 		dev_dbg(&udev->dev, "remote wakeup needed for autosuspend\n");
 		return -EOPNOTSUPP;
 	}
+
+	/*
+	 * If the device is a direct child of the root hub and the HCD
+	 * doesn't handle wakeup requests, don't allow autosuspend when
+	 * wakeup is needed.
+	 */
+	if (w && udev->parent == udev->bus->root_hub &&
+			bus_to_hcd(udev->bus)->cant_recv_wakeups) {
+		dev_dbg(&udev->dev, "HCD doesn't handle wakeup requests\n");
+		return -EOPNOTSUPP;
+	}
+
 	udev->do_remote_wakeup = w;
 	return 0;
 }
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index fc72d44..949303f 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -2242,6 +2242,9 @@ struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
 	hcd->rsrc_start = res_start;
 	hcd->rsrc_len = res_len;
 
+	/* This driver doesn't support wakeup requests */
+	hcd->cant_recv_wakeups = 1;
+
 	ret = usb_add_hcd(hcd, irq, irqflags);
 	if (ret)
 		goto err_unmap;
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 6674ec0..feb77716 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -126,6 +126,7 @@ struct usb_hcd {
 	unsigned		wireless:1;	/* Wireless USB HCD */
 	unsigned		authorized_default:1;
 	unsigned		has_tt:1;	/* Integrated TT in root hub */
+	unsigned		cant_recv_wakeups:1;
 
 	unsigned int		irq;		/* irq allocated */
 	void __iomem		*regs;		/* device memory/io */
-- 
1.9.1

[PATCH 3.4 018/172] USB: fix use-after-free bug in usb_hcd_unlink_urb()

[lizf]

From: Alan Stern <stern@rowland.harvard.edu>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit c99197902da284b4b723451c1471c45b18537cde upstream.

The usb_hcd_unlink_urb() routine in hcd.c contains two possible
use-after-free errors.  The dev_dbg() statement at the end of the
routine dereferences urb and urb->dev even though both structures may
have been deallocated.

This patch fixes the problem by storing urb->dev in a local variable
(avoiding the dereference of urb) and moving the dev_dbg() up before
the usb_put_dev() call.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/core/hcd.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 6baeada..f1d0e3c 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1528,6 +1528,7 @@ static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
 int usb_hcd_unlink_urb (struct urb *urb, int status)
 {
 	struct usb_hcd		*hcd;
+	struct usb_device	*udev = urb->dev;
 	int			retval = -EIDRM;
 	unsigned long		flags;
 
@@ -1539,20 +1540,19 @@ int usb_hcd_unlink_urb (struct urb *urb, int status)
 	spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
 	if (atomic_read(&urb->use_count) > 0) {
 		retval = 0;
-		usb_get_dev(urb->dev);
+		usb_get_dev(udev);
 	}
 	spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
 	if (retval == 0) {
 		hcd = bus_to_hcd(urb->dev->bus);
 		retval = unlink1(hcd, urb, status);
-		usb_put_dev(urb->dev);
+		if (retval == 0)
+			retval = -EINPROGRESS;
+		else if (retval != -EIDRM && retval != -EBUSY)
+			dev_dbg(&udev->dev, "hcd_unlink_urb %p fail %d\n",
+					urb, retval);
+		usb_put_dev(udev);
 	}
-
-	if (retval == 0)
-		retval = -EINPROGRESS;
-	else if (retval != -EIDRM && retval != -EBUSY)
-		dev_dbg(&urb->dev->dev, "hcd_unlink_urb %p fail %d\n",
-				urb, retval);
 	return retval;
 }
 
-- 
1.9.1

[PATCH 3.4 019/172] vt: provide notifications on selection changes

[lizf]

From: Nicolas Pitre <nicolas.pitre@linaro.org>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 19e3ae6b4f07a87822c1c9e7ed99d31860e701af upstream.

The vcs device's poll/fasync support relies on the vt notifier to signal
changes to the screen content.  Notifier invocations were missing for
changes that comes through the selection interface though.  Fix that.

Tested with BRLTTY 5.2.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: Dave Mielke <dave@mielke.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/tty/vt/vt.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 268294c..334a7b2 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -498,6 +498,7 @@ void invert_screen(struct vc_data *vc, int offset, int count, int viewed)
 #endif
 	if (DO_UPDATE(vc))
 		do_update_region(vc, (unsigned long) p, count);
+	notify_update(vc);
 }
 
 /* used by selection: complement pointer position */
@@ -514,6 +515,7 @@ void complement_pos(struct vc_data *vc, int offset)
 		scr_writew(old, screenpos(vc, old_offset, 1));
 		if (DO_UPDATE(vc))
 			vc->vc_sw->con_putc(vc, old, oldy, oldx);
+		notify_update(vc);
 	}
 
 	old_offset = offset;
@@ -531,8 +533,8 @@ void complement_pos(struct vc_data *vc, int offset)
 			oldy = (offset >> 1) / vc->vc_cols;
 			vc->vc_sw->con_putc(vc, new, oldy, oldx);
 		}
+		notify_update(vc);
 	}
-
 }
 
 static void insert_char(struct vc_data *vc, unsigned int nr)
-- 
1.9.1

[PATCH 3.4 020/172] tty: Prevent untrappable signals from malicious program

[lizf]

From: Peter Hurley <peter@hurleysoftware.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 37480a05685ed5b8e1b9bf5e5c53b5810258b149 upstream.

Commit 26df6d13406d1a5 ("tty: Add EXTPROC support for LINEMODE")
allows a process which has opened a pty master to send _any_ signal
to the process group of the pty slave. Although potentially
exploitable by a malicious program running a setuid program on
a pty slave, it's unknown if this exploit currently exists.

Limit to signals actually used.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Howard Chu <hyc@symas.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/tty/pty.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index cf9a191..bc955d7 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -173,6 +173,9 @@ static int pty_signal(struct tty_struct *tty, int sig)
 	unsigned long flags;
 	struct pid *pgrp;
 
+	if (sig != SIGINT && sig != SIGQUIT && sig != SIGTSTP)
+		return -EINVAL;
+
 	if (tty->link) {
 		spin_lock_irqsave(&tty->link->ctrl_lock, flags);
 		pgrp = get_pid(tty->link->pgrp);
-- 
1.9.1

[PATCH 3.4 021/172] ath5k: fix spontaneus AR5312 freezes

[lizf]

From: Sergey Ryazanov <ryazanov.s.a@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 8bfae4f9938b6c1f033a5159febe97e441d6d526 upstream.

Sometimes while CPU have some load and ath5k doing the wireless
interface reset the whole WiSoC completely freezes. Set of tests shows
that using atomic delay function while we wait interface reset helps to
avoid such freezes.

The easiest way to reproduce this issue: create a station interface,
start continous scan with wpa_supplicant and load CPU by something. Or
just create multiple station interfaces and put them all in continous
scan.

This patch partially reverts the commit 1846ac3dbec0 ("ath5k: Use
usleep_range where possible"), which replaces initial udelay()
by usleep_range().

I do not know actual source of this issue, but all looks like that HW
freeze is caused by transaction on internal SoC bus, while wireless
block is in reset state.

Also I should note that I do not know how many chips are affected, but I
did not see this issue with chips, other than AR5312.

CC: Jiri Slaby <jirislaby@gmail.com>
CC: Nick Kossifidis <mickflemm@gmail.com>
CC: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Fixes: 1846ac3dbec0 ("ath5k: Use usleep_range where possible")
Reported-by: Christophe Prevotaux <c.prevotaux@rural-networks.com>
Tested-by: Christophe Prevotaux <c.prevotaux@rural-networks.com>
Tested-by: Eric Bree <ebree@nltinc.com>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/net/wireless/ath/ath5k/reset.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 200f165..2cc3f41 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -476,7 +476,7 @@ ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags)
 	regval = ioread32(reg);
 	iowrite32(regval | val, reg);
 	regval = ioread32(reg);
-	usleep_range(100, 150);
+	udelay(100);	/* NB: should be atomic */
 
 	/* Bring BB/MAC out of reset */
 	iowrite32(regval & ~val, reg);
-- 
1.9.1

[PATCH 3.4 022/172] rtnetlink: ifla_vf_policy: fix misuses of NLA_BINARY

[lizf]

From: Daniel Borkmann <daniel@iogearbox.net>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 364d5716a7adb91b731a35765d369602d68d2881 upstream.

ifla_vf_policy[] is wrong in advertising its individual member types as
NLA_BINARY since .type = NLA_BINARY in combination with .len declares the
len member as *max* attribute length [0, len].

The issue is that when do_setvfinfo() is being called to set up a VF
through ndo handler, we could set corrupted data if the attribute length
is less than the size of the related structure itself.

The intent is exactly the opposite, namely to make sure to pass at least
data of minimum size of len.

Fixes: ebc08a6f47ee ("rtnetlink: Add VF config code to rtnetlink")
Cc: Mitch Williams <mitch.a.williams@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
[lizf: Backported to 3.4: drop changes to IFLA_VF_RATE and IFLA_VF_LINK_STATE]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/core/rtnetlink.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 3cd37e9..42c2596 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1144,14 +1144,10 @@ static const struct nla_policy ifla_vfinfo_policy[IFLA_VF_INFO_MAX+1] = {
 };
 
 static const struct nla_policy ifla_vf_policy[IFLA_VF_MAX+1] = {
-	[IFLA_VF_MAC]		= { .type = NLA_BINARY,
-				    .len = sizeof(struct ifla_vf_mac) },
-	[IFLA_VF_VLAN]		= { .type = NLA_BINARY,
-				    .len = sizeof(struct ifla_vf_vlan) },
-	[IFLA_VF_TX_RATE]	= { .type = NLA_BINARY,
-				    .len = sizeof(struct ifla_vf_tx_rate) },
-	[IFLA_VF_SPOOFCHK]	= { .type = NLA_BINARY,
-				    .len = sizeof(struct ifla_vf_spoofchk) },
+	[IFLA_VF_MAC]		= { .len = sizeof(struct ifla_vf_mac) },
+	[IFLA_VF_VLAN]		= { .len = sizeof(struct ifla_vf_vlan) },
+	[IFLA_VF_TX_RATE]	= { .len = sizeof(struct ifla_vf_tx_rate) },
+	[IFLA_VF_SPOOFCHK]	= { .len = sizeof(struct ifla_vf_spoofchk) },
 };
 
 static const struct nla_policy ifla_port_policy[IFLA_PORT_MAX+1] = {
-- 
1.9.1

[PATCH 3.4 023/172] ALSA: off by one bug in snd_riptide_joystick_probe()

[lizf]

From: Dan Carpenter <dan.carpenter@oracle.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit e4940626defdf6c92da1052ad3f12741c1a28c90 upstream.

The problem here is that we check:

	if (dev >= SNDRV_CARDS)

Then we increment "dev".

       if (!joystick_port[dev++])

Then we use it as an offset into a array with SNDRV_CARDS elements.

	if (!request_region(joystick_port[dev], 8, "Riptide gameport")) {

This has 3 effects:
1) If you use the module option to specify the joystick port then it has
   to be shifted one space over.
2) The wrong error message will be printed on failure if you have over
   32 cards.
3) Static checkers will correctly complain that are off by one.

Fixes: db1005ec6ff8 ('ALSA: riptide - Fix joystick resource handling')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/pci/riptide/riptide.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 0481d94..c1cdd02 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -2026,32 +2026,43 @@ snd_riptide_joystick_probe(struct pci_dev *pci, const struct pci_device_id *id)
 {
 	static int dev;
 	struct gameport *gameport;
+	int ret;
 
 	if (dev >= SNDRV_CARDS)
 		return -ENODEV;
+
 	if (!enable[dev]) {
-		dev++;
-		return -ENOENT;
+		ret = -ENOENT;
+		goto inc_dev;
 	}
 
-	if (!joystick_port[dev++])
-		return 0;
+	if (!joystick_port[dev]) {
+		ret = 0;
+		goto inc_dev;
+	}
 
 	gameport = gameport_allocate_port();
-	if (!gameport)
-		return -ENOMEM;
+	if (!gameport) {
+		ret = -ENOMEM;
+		goto inc_dev;
+	}
 	if (!request_region(joystick_port[dev], 8, "Riptide gameport")) {
 		snd_printk(KERN_WARNING
 			   "Riptide: cannot grab gameport 0x%x\n",
 			   joystick_port[dev]);
 		gameport_free_port(gameport);
-		return -EBUSY;
+		ret = -EBUSY;
+		goto inc_dev;
 	}
 
 	gameport->io = joystick_port[dev];
 	gameport_register_port(gameport);
 	pci_set_drvdata(pci, gameport);
-	return 0;
+
+	ret = 0;
+inc_dev:
+	dev++;
+	return ret;
 }
 
 static void __devexit snd_riptide_joystick_remove(struct pci_dev *pci)
-- 
1.9.1

[PATCH 3.4 024/172] fsnotify: fix handling of renames in audit

[lizf]

From: Jan Kara <jack@suse.cz>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 6ee8e25fc3e916193bce4ebb43d5439e1e2144ab upstream.

Commit e9fd702a58c4 ("audit: convert audit watches to use fsnotify
instead of inotify") broke handling of renames in audit.  Audit code
wants to update inode number of an inode corresponding to watched name
in a directory.  When something gets renamed into a directory to a
watched name, inotify previously passed moved inode to audit code
however new fsnotify code passes directory inode where the change
happened.  That confuses audit and it starts watching parent directory
instead of a file in a directory.

This can be observed for example by doing:

  cd /tmp
  touch foo bar
  auditctl -w /tmp/foo
  touch foo
  mv bar foo
  touch foo

In audit log we see events like:

  type=CONFIG_CHANGE msg=audit(1423563584.155:90): auid=1000 ses=2 op="updated rules" path="/tmp/foo" key=(null) list=4 res=1
  ...
  type=PATH msg=audit(1423563584.155:91): item=2 name="bar" inode=1046884 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=DELETE
  type=PATH msg=audit(1423563584.155:91): item=3 name="foo" inode=1046842 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=DELETE
  type=PATH msg=audit(1423563584.155:91): item=4 name="foo" inode=1046884 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=CREATE
  ...

and that's it - we see event for the first touch after creating the
audit rule, we see events for rename but we don't see any event for the
last touch.  However we start seeing events for unrelated stuff
happening in /tmp.

Fix the problem by passing moved inode as data in the FS_MOVED_FROM and
FS_MOVED_TO events instead of the directory where the change happens.
This doesn't introduce any new problems because noone besides
audit_watch.c cares about the passed value:

  fs/notify/fanotify/fanotify.c cares only about FSNOTIFY_EVENT_PATH events.
  fs/notify/dnotify/dnotify.c doesn't care about passed 'data' value at all.
  fs/notify/inotify/inotify_fsnotify.c uses 'data' only for FSNOTIFY_EVENT_PATH.
  kernel/audit_tree.c doesn't care about passed 'data' at all.
  kernel/audit_watch.c expects moved inode as 'data'.

Fixes: e9fd702a58c49db ("audit: convert audit watches to use fsnotify instead of inotify")
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 include/linux/fsnotify.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index a6dfe69..fac26cb 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -101,8 +101,10 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir,
 		new_dir_mask |= FS_ISDIR;
 	}
 
-	fsnotify(old_dir, old_dir_mask, old_dir, FSNOTIFY_EVENT_INODE, old_name, fs_cookie);
-	fsnotify(new_dir, new_dir_mask, new_dir, FSNOTIFY_EVENT_INODE, new_name, fs_cookie);
+	fsnotify(old_dir, old_dir_mask, source, FSNOTIFY_EVENT_INODE, old_name,
+		 fs_cookie);
+	fsnotify(new_dir, new_dir_mask, source, FSNOTIFY_EVENT_INODE, new_name,
+		 fs_cookie);
 
 	if (target)
 		fsnotify_link_count(target);
-- 
1.9.1

[PATCH 3.4 025/172] NFSv4.1: Fix a kfree() of uninitialised pointers in decode_cb_sequence_args

[lizf]

From: Trond Myklebust <trond.myklebust@primarydata.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit d8ba1f971497c19cf80da1ea5391a46a5f9fbd41 upstream.

If the call to decode_rc_list() fails due to a memory allocation error,
then we need to truncate the array size to ensure that we only call
kfree() on those pointer that were allocated.

Reported-by: David Ramos <daramos@stanford.edu>
Fixes: 4aece6a19cf7f ("nfs41: cb_sequence xdr implementation")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/nfs/callback_xdr.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index 27c2969..3abfd5a 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -463,8 +463,10 @@ static __be32 decode_cb_sequence_args(struct svc_rqst *rqstp,
 
 		for (i = 0; i < args->csa_nrclists; i++) {
 			status = decode_rc_list(xdr, &args->csa_rclists[i]);
-			if (status)
+			if (status) {
+				args->csa_nrclists = i;
 				goto out_free;
+			}
 		}
 	}
 	status = 0;
-- 
1.9.1

[PATCH 3.4 026/172] cpufreq: speedstep-smi: enable interrupts when waiting

[lizf]

From: Mikulas Patocka <mpatocka@redhat.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit d4d4eda23794c701442e55129dd4f8f2fefd5e4d upstream.

On Dell Latitude C600 laptop with Pentium 3 850MHz processor, the
speedstep-smi driver sometimes loads and sometimes doesn't load with
"change to state X failed" message.

The hardware sometimes refuses to change frequency and in this case, we
need to retry later. I found out that we need to enable interrupts while
waiting. When we enable interrupts, the hardware blockage that prevents
frequency transition resolves and the transition is possible. With
disabled interrupts, the blockage doesn't resolve (no matter how long do
we wait). The exact reasons for this hardware behavior are unknown.

This patch enables interrupts in the function speedstep_set_state that can
be called with disabled interrupts. However, this function is called with
disabled interrupts only from speedstep_get_freqs, so it shouldn't cause
any problem.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/cpufreq/speedstep-lib.c |  3 +++
 drivers/cpufreq/speedstep-smi.c | 12 ++++++++++++
 2 files changed, 15 insertions(+)

diff --git a/drivers/cpufreq/speedstep-lib.c b/drivers/cpufreq/speedstep-lib.c
index 7047821..4ab7a21 100644
--- a/drivers/cpufreq/speedstep-lib.c
+++ b/drivers/cpufreq/speedstep-lib.c
@@ -400,6 +400,7 @@ unsigned int speedstep_get_freqs(enum speedstep_processor processor,
 
 	pr_debug("previous speed is %u\n", prev_speed);
 
+	preempt_disable();
 	local_irq_save(flags);
 
 	/* switch to low state */
@@ -464,6 +465,8 @@ unsigned int speedstep_get_freqs(enum speedstep_processor processor,
 
 out:
 	local_irq_restore(flags);
+	preempt_enable();
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(speedstep_get_freqs);
diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c
index 6a457fc..b01926d 100644
--- a/drivers/cpufreq/speedstep-smi.c
+++ b/drivers/cpufreq/speedstep-smi.c
@@ -188,6 +188,7 @@ static void speedstep_set_state(unsigned int state)
 		return;
 
 	/* Disable IRQs */
+	preempt_disable();
 	local_irq_save(flags);
 
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
@@ -198,9 +199,19 @@ static void speedstep_set_state(unsigned int state)
 
 	do {
 		if (retry) {
+			/*
+			 * We need to enable interrupts, otherwise the blockage
+			 * won't resolve.
+			 *
+			 * We disable preemption so that other processes don't
+			 * run. If other processes were running, they could
+			 * submit more DMA requests, making the blockage worse.
+			 */
 			pr_debug("retry %u, previous result %u, waiting...\n",
 					retry, result);
+			local_irq_enable();
 			mdelay(retry * 50);
+			local_irq_disable();
 		}
 		retry++;
 		__asm__ __volatile__(
@@ -217,6 +228,7 @@ static void speedstep_set_state(unsigned int state)
 
 	/* enable IRQs */
 	local_irq_restore(flags);
+	preempt_enable();
 
 	if (new_state == state)
 		pr_debug("change to %u MHz succeeded after %u tries "
-- 
1.9.1

[PATCH 3.4 027/172] mm/hugetlb: fix getting refcount 0 page in hugetlb_fault()

[lizf]

From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 0f792cf949a0be506c2aa8bfac0605746b146dda upstream.

When running the test which causes the race as shown in the previous patch,
we can hit the BUG "get_page() on refcount 0 page" in hugetlb_fault().

This race happens when pte turns into migration entry just after the first
check of is_hugetlb_entry_migration() in hugetlb_fault() passed with false.
To fix this, we need to check pte_present() again after huge_ptep_get().

This patch also reorders taking ptl and doing pte_page(), because
pte_page() should be done in ptl.  Due to this reordering, we need use
trylock_page() in page != pagecache_page case to respect locking order.

Fixes: 66aebce747ea ("hugetlb: fix race condition in hugetlb_fault()")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[lizf: Backported to 3.4:
 - adjust context
 - there's no huge_pte_lock, so lock mm->page_table_lock directly
 - the lable should be out_page_table_lock instead of out_ptl]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 mm/hugetlb.c | 36 +++++++++++++++++++++++++++---------
 1 file changed, 27 insertions(+), 9 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index efd6820..d02fbbc 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2813,6 +2813,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	struct page *pagecache_page = NULL;
 	static DEFINE_MUTEX(hugetlb_instantiation_mutex);
 	struct hstate *h = hstate_vma(vma);
+	int need_wait_lock = 0;
 
 	address &= huge_page_mask(h);
 
@@ -2846,6 +2847,16 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	ret = 0;
 
 	/*
+	 * entry could be a migration/hwpoison entry at this point, so this
+	 * check prevents the kernel from going below assuming that we have
+	 * a active hugepage in pagecache. This goto expects the 2nd page fault,
+	 * and is_hugetlb_entry_(migration|hwpoisoned) check will properly
+	 * handle it.
+	 */
+	if (!pte_present(entry))
+		goto out_mutex;
+
+	/*
 	 * If we are going to COW the mapping later, we examine the pending
 	 * reservations for this page now. This will ensure that any
 	 * allocations necessary to record that reservation occur outside the
@@ -2864,29 +2875,32 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 								vma, address);
 	}
 
+	spin_lock(&mm->page_table_lock);
+
+	/* Check for a racing update before calling hugetlb_cow */
+	if (unlikely(!pte_same(entry, huge_ptep_get(ptep))))
+		goto out_page_table_lock;
+
 	/*
 	 * hugetlb_cow() requires page locks of pte_page(entry) and
 	 * pagecache_page, so here we need take the former one
 	 * when page != pagecache_page or !pagecache_page.
-	 * Note that locking order is always pagecache_page -> page,
-	 * so no worry about deadlock.
 	 */
 	page = pte_page(entry);
-	get_page(page);
 	if (page != pagecache_page)
-		lock_page(page);
+		if (!trylock_page(page)) {
+			need_wait_lock = 1;
+			goto out_page_table_lock;
+	}
 
-	spin_lock(&mm->page_table_lock);
-	/* Check for a racing update before calling hugetlb_cow */
-	if (unlikely(!pte_same(entry, huge_ptep_get(ptep))))
-		goto out_page_table_lock;
+	get_page(page);
 
 
 	if (flags & FAULT_FLAG_WRITE) {
 		if (!pte_write(entry)) {
 			ret = hugetlb_cow(mm, vma, address, ptep, entry,
 							pagecache_page);
-			goto out_page_table_lock;
+			goto out_put_page;
 		}
 		entry = pte_mkdirty(entry);
 	}
@@ -2895,6 +2909,10 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 						flags & FAULT_FLAG_WRITE))
 		update_mmu_cache(vma, address, ptep);
 
+out_put_page:
+	if (page != pagecache_page)
+		unlock_page(page);
+	put_page(page);
 out_page_table_lock:
 	spin_unlock(&mm->page_table_lock);
 
-- 
1.9.1

[PATCH 3.4 028/172] mm/hugetlb: add migration/hwpoisoned entry check in hugetlb_change_protection

[lizf]

From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit a8bda28d87c38c6aa93de28ba5d30cc18e865a11 upstream.

There is a race condition between hugepage migration and
change_protection(), where hugetlb_change_protection() doesn't care about
migration entries and wrongly overwrites them.  That causes unexpected
results like kernel crash.  HWPoison entries also can cause the same
problem.

This patch adds is_hugetlb_entry_(migration|hwpoisoned) check in this
function to do proper actions.

Fixes: 290408d4a2 ("hugetlb: hugepage migration core")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[lizf: Backported to 3.4:
 - remove locking of ptl
 - remove counting of pages]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 mm/hugetlb.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index d02fbbc..5f12dba 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -3052,7 +3052,22 @@ void hugetlb_change_protection(struct vm_area_struct *vma,
 			continue;
 		if (huge_pmd_unshare(mm, &address, ptep))
 			continue;
-		if (!huge_pte_none(huge_ptep_get(ptep))) {
+		pte = huge_ptep_get(ptep);
+		if (unlikely(is_hugetlb_entry_hwpoisoned(pte)))
+			continue;
+		if (unlikely(is_hugetlb_entry_migration(pte))) {
+			swp_entry_t entry = pte_to_swp_entry(pte);
+
+			if (is_write_migration_entry(entry)) {
+				pte_t newpte;
+
+				make_migration_entry_read(&entry);
+				newpte = swp_entry_to_pte(entry);
+				set_huge_pte_at(mm, address, ptep, newpte);
+			}
+			continue;
+		}
+		if (!huge_pte_none(pte)) {
 			pte = huge_ptep_get_and_clear(mm, address, ptep);
 			pte = pte_mkhuge(pte_modify(pte, newprot));
 			set_huge_pte_at(mm, address, ptep, pte);
-- 
1.9.1

[PATCH 3.4 029/172] mm/hugetlb: add migration entry check in __unmap_hugepage_range

[lizf]

From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 9fbc1f635fd0bd28cb32550211bf095753ac637a upstream.

If __unmap_hugepage_range() tries to unmap the address range over which
hugepage migration is on the way, we get the wrong page because pte_page()
doesn't work for migration entries.  This patch simply clears the pte for
migration entries as we do for hwpoison entries.

Fixes: 290408d4a2 ("hugetlb: hugepage migration core")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[lizf: Backported to 3.4:
 - adjust context
 - update the comment that we doesn't clear pte here]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 mm/hugetlb.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 5f12dba..bc36e28 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2401,9 +2401,10 @@ void __unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
 			continue;
 
 		/*
-		 * HWPoisoned hugepage is already unmapped and dropped reference
+		 * Migrating hugepage or HWPoisoned hugepage is already
+		 * unmapped and its refcount is dropped
 		 */
-		if (unlikely(is_hugetlb_entry_hwpoisoned(pte)))
+		if (unlikely(!pte_present(pte)))
 			continue;
 
 		page = pte_page(pte);
-- 
1.9.1

[PATCH 3.4 030/172] mm/mmap.c: fix arithmetic overflow in __vm_enough_memory()

[lizf]

From: Roman Gushchin <klamm@yandex-team.ru>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 5703b087dc8eaf47bfb399d6cf512d471beff405 upstream.

I noticed, that "allowed" can easily overflow by falling below 0,
because (total_vm / 32) can be larger than "allowed".  The problem
occurs in OVERCOMMIT_NONE mode.

In this case, a huge allocation can success and overcommit the system
(despite OVERCOMMIT_NONE mode).  All subsequent allocations will fall
(system-wide), so system become unusable.

The problem was masked out by commit c9b1d0981fcc
("mm: limit growth of 3% hardcoded other user reserve"),
but it's easy to reproduce it on older kernels:
1) set overcommit_memory sysctl to 2
2) mmap() large file multiple times (with VM_SHARED flag)
3) try to malloc() large amount of memory

It also can be reproduced on newer kernels, but miss-configured
sysctl_user_reserve_kbytes is required.

Fix this issue by switching to signed arithmetic here.

[akpm@linux-foundation.org: use min_t]
Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Cc: Andrew Shewmaker <agshew@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[lizf: Backported to 3.4:
 - adjust context
 - there's no variable reserve]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 mm/mmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/mmap.c b/mm/mmap.c
index 208e70f..cb6456d 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -112,7 +112,7 @@ struct percpu_counter vm_committed_as ____cacheline_aligned_in_smp;
  */
 int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin)
 {
-	unsigned long free, allowed;
+	long free, allowed;
 
 	vm_acct_memory(pages);
 
-- 
1.9.1

[PATCH 3.4 031/172] mm/nommu.c: fix arithmetic overflow in __vm_enough_memory()

[lizf]

From: Roman Gushchin <klamm@yandex-team.ru>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 8138a67a5557ffea3a21dfd6f037842d4e748513 upstream.

I noticed that "allowed" can easily overflow by falling below 0, because
(total_vm / 32) can be larger than "allowed".  The problem occurs in
OVERCOMMIT_NONE mode.

In this case, a huge allocation can success and overcommit the system
(despite OVERCOMMIT_NONE mode).  All subsequent allocations will fall
(system-wide), so system become unusable.

The problem was masked out by commit c9b1d0981fcc
("mm: limit growth of 3% hardcoded other user reserve"),
but it's easy to reproduce it on older kernels:
1) set overcommit_memory sysctl to 2
2) mmap() large file multiple times (with VM_SHARED flag)
3) try to malloc() large amount of memory

It also can be reproduced on newer kernels, but miss-configured
sysctl_user_reserve_kbytes is required.

Fix this issue by switching to signed arithmetic here.

Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Cc: Andrew Shewmaker <agshew@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[lizf: Backported to 3.4:
 - adjust context
 - there's no variable reserve]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 mm/nommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/nommu.c b/mm/nommu.c
index d3afb47..3f282f9 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1916,7 +1916,7 @@ EXPORT_SYMBOL(unmap_mapping_range);
  */
 int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin)
 {
-	unsigned long free, allowed;
+	long free, allowed;
 
 	vm_acct_memory(pages);
 
-- 
1.9.1

[PATCH 3.4 032/172] iscsi-target: Drop problematic active_ts_list usage

[lizf]

From: Nicholas Bellinger <nab@linux-iscsi.org>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 3fd7b60f2c7418239d586e359e0c6d8503e10646 upstream.

This patch drops legacy active_ts_list usage within iscsi_target_tq.c
code.  It was originally used to track the active thread sets during
iscsi-target shutdown, and is no longer used by modern upstream code.

Two people have reported list corruption using traditional iscsi-target
and iser-target with the following backtrace, that appears to be related
to iscsi_thread_set->ts_list being used across both active_ts_list and
inactive_ts_list.

[   60.782534] ------------[ cut here ]------------
[   60.782543] WARNING: CPU: 0 PID: 9430 at lib/list_debug.c:53 __list_del_entry+0x63/0xd0()
[   60.782545] list_del corruption, ffff88045b00d180->next is LIST_POISON1 (dead000000100100)
[   60.782546] Modules linked in: ib_srpt tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc scsi_tgt ib_isert rdma_cm iw_cm ib_addr iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc autofs4 sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ib_ipoib ib_cm ib_uverbs ib_umad mlx4_en mlx4_ib ib_sa ib_mad ib_core mlx4_core dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan vhost tun kvm_intel kvm uinput iTCO_wdt iTCO_vendor_support microcode serio_raw pcspkr sb_edac edac_core sg i2c_i801 lpc_ich mfd_core mtip32xx igb i2c_algo_bit i2c_core ptp pps_core ioatdma dca wmi ext3(F) jbd(F) mbcache(F) sd_mod(F) crc_t10dif(F) crct10dif_common(F) ahci(F) libahci(F) isci(F) libsas(F) scsi_trans
 port_sas(F) [last unloaded: speedstep_lib]
[   60.782597] CPU: 0 PID: 9430 Comm: iscsi_ttx Tainted: GF 3.12.19+ #2
[   60.782598] Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013
[   60.782599]  0000000000000035 ffff88044de31d08 ffffffff81553ae7 0000000000000035
[   60.782602]  ffff88044de31d58 ffff88044de31d48 ffffffff8104d1cc 0000000000000002
[   60.782605]  ffff88045b00d180 ffff88045b00d0c0 ffff88045b00d0c0 ffff88044de31e58
[   60.782607] Call Trace:
[   60.782611]  [<ffffffff81553ae7>] dump_stack+0x49/0x62
[   60.782615]  [<ffffffff8104d1cc>] warn_slowpath_common+0x8c/0xc0
[   60.782618]  [<ffffffff8104d2b6>] warn_slowpath_fmt+0x46/0x50
[   60.782620]  [<ffffffff81280933>] __list_del_entry+0x63/0xd0
[   60.782622]  [<ffffffff812809b1>] list_del+0x11/0x40
[   60.782630]  [<ffffffffa06e7cf9>] iscsi_del_ts_from_active_list+0x29/0x50 [iscsi_target_mod]
[   60.782635]  [<ffffffffa06e87b1>] iscsi_tx_thread_pre_handler+0xa1/0x180 [iscsi_target_mod]
[   60.782642]  [<ffffffffa06fb9ae>] iscsi_target_tx_thread+0x4e/0x220 [iscsi_target_mod]
[   60.782647]  [<ffffffffa06fb960>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[   60.782652]  [<ffffffffa06fb960>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[   60.782655]  [<ffffffff8106f99e>] kthread+0xce/0xe0
[   60.782657]  [<ffffffff8106f8d0>] ? kthread_freezable_should_stop+0x70/0x70
[   60.782660]  [<ffffffff8156026c>] ret_from_fork+0x7c/0xb0
[   60.782662]  [<ffffffff8106f8d0>] ? kthread_freezable_should_stop+0x70/0x70
[   60.782663] ---[ end trace 9662f4a661d33965 ]---

Since this code is no longer used, go ahead and drop the problematic usage
all-together.

Reported-by: Gavin Guo <gavin.guo@canonical.com>
Reported-by: Moussa Ba <moussaba@micron.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/target/iscsi/iscsi_target_tq.c | 28 +++++-----------------------
 1 file changed, 5 insertions(+), 23 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target_tq.c b/drivers/target/iscsi/iscsi_target_tq.c
index 977e1cf..4f447fd 100644
--- a/drivers/target/iscsi/iscsi_target_tq.c
+++ b/drivers/target/iscsi/iscsi_target_tq.c
@@ -26,36 +26,22 @@
 #include "iscsi_target_tq.h"
 #include "iscsi_target.h"
 
-static LIST_HEAD(active_ts_list);
 static LIST_HEAD(inactive_ts_list);
-static DEFINE_SPINLOCK(active_ts_lock);
 static DEFINE_SPINLOCK(inactive_ts_lock);
 static DEFINE_SPINLOCK(ts_bitmap_lock);
 
-static void iscsi_add_ts_to_active_list(struct iscsi_thread_set *ts)
-{
-	spin_lock(&active_ts_lock);
-	list_add_tail(&ts->ts_list, &active_ts_list);
-	iscsit_global->active_ts++;
-	spin_unlock(&active_ts_lock);
-}
-
 extern void iscsi_add_ts_to_inactive_list(struct iscsi_thread_set *ts)
 {
+	if (!list_empty(&ts->ts_list)) {
+		WARN_ON(1);
+		return;
+	}
 	spin_lock(&inactive_ts_lock);
 	list_add_tail(&ts->ts_list, &inactive_ts_list);
 	iscsit_global->inactive_ts++;
 	spin_unlock(&inactive_ts_lock);
 }
 
-static void iscsi_del_ts_from_active_list(struct iscsi_thread_set *ts)
-{
-	spin_lock(&active_ts_lock);
-	list_del(&ts->ts_list);
-	iscsit_global->active_ts--;
-	spin_unlock(&active_ts_lock);
-}
-
 static struct iscsi_thread_set *iscsi_get_ts_from_inactive_list(void)
 {
 	struct iscsi_thread_set *ts;
@@ -69,7 +55,7 @@ static struct iscsi_thread_set *iscsi_get_ts_from_inactive_list(void)
 	list_for_each_entry(ts, &inactive_ts_list, ts_list)
 		break;
 
-	list_del(&ts->ts_list);
+	list_del_init(&ts->ts_list);
 	iscsit_global->inactive_ts--;
 	spin_unlock(&inactive_ts_lock);
 
@@ -220,8 +206,6 @@ static void iscsi_deallocate_extra_thread_sets(void)
 
 void iscsi_activate_thread_set(struct iscsi_conn *conn, struct iscsi_thread_set *ts)
 {
-	iscsi_add_ts_to_active_list(ts);
-
 	spin_lock_bh(&ts->ts_state_lock);
 	conn->thread_set = ts;
 	ts->conn = conn;
@@ -424,7 +408,6 @@ struct iscsi_conn *iscsi_rx_thread_pre_handler(struct iscsi_thread_set *ts)
 
 	if (ts->delay_inactive && (--ts->thread_count == 0)) {
 		spin_unlock_bh(&ts->ts_state_lock);
-		iscsi_del_ts_from_active_list(ts);
 
 		if (!iscsit_global->in_shutdown)
 			iscsi_deallocate_extra_thread_sets();
@@ -477,7 +460,6 @@ struct iscsi_conn *iscsi_tx_thread_pre_handler(struct iscsi_thread_set *ts)
 
 	if (ts->delay_inactive && (--ts->thread_count == 0)) {
 		spin_unlock_bh(&ts->ts_state_lock);
-		iscsi_del_ts_from_active_list(ts);
 
 		if (!iscsit_global->in_shutdown)
 			iscsi_deallocate_extra_thread_sets();
-- 
1.9.1

[PATCH 3.4 033/172] mm/memory.c: actually remap enough memory

[lizf]

From: Grazvydas Ignotas <notasas@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 9cb12d7b4ccaa976f97ce0c5fd0f1b6a83bc2a75 upstream.

For whatever reason, generic_access_phys() only remaps one page, but
actually allows to access arbitrary size.  It's quite easy to trigger
large reads, like printing out large structure with gdb, which leads to a
crash.  Fix it by remapping correct size.

Fixes: 28b2ee20c7cb ("access_process_vm device memory infrastructure")
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 mm/memory.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/memory.c b/mm/memory.c
index 45cd14f..02aef93 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3845,7 +3845,7 @@ int generic_access_phys(struct vm_area_struct *vma, unsigned long addr,
 	if (follow_phys(vma, addr, write, &prot, &phys_addr))
 		return -EINVAL;
 
-	maddr = ioremap_prot(phys_addr, PAGE_SIZE, prot);
+	maddr = ioremap_prot(phys_addr, PAGE_ALIGN(len + offset), prot);
 	if (write)
 		memcpy_toio(maddr + offset, buf, len);
 	else
-- 
1.9.1

[PATCH 3.4 034/172] drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessary

[lizf]

From: Alex Deucher <alexander.deucher@amd.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 66c2b84ba6256bc5399eed45582af9ebb3ba2c15 upstream.

Don't restrict it to just eDP panels.  Some LVDS bridge chips require
this.  Fixes blank panels on resume on certain laptops.  Noticed
by mrnuke on IRC.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=42960

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/gpu/drm/radeon/atombios_dp.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 8d1724c..5325c20 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -777,10 +777,8 @@ static int radeon_dp_link_train_init(struct radeon_dp_link_train_info *dp_info)
 		radeon_write_dpcd_reg(dp_info->radeon_connector,
 				      DP_DOWNSPREAD_CTRL, 0);
 
-	if ((dp_info->connector->connector_type == DRM_MODE_CONNECTOR_eDP) &&
-	    (dig->panel_mode == DP_PANEL_MODE_INTERNAL_DP2_MODE)) {
+	if (dig->panel_mode == DP_PANEL_MODE_INTERNAL_DP2_MODE)
 		radeon_write_dpcd_reg(dp_info->radeon_connector, DP_EDP_CONFIGURATION_SET, 1);
-	}
 
 	/* set the lane count on the sink */
 	tmp = dp_info->dp_lane_count;
-- 
1.9.1

[PATCH 3.4 035/172] ALSA: hdspm - Constrain periods to 2 on older cards

[lizf]

From: Adrian Knoth <adi@drcomp.erfurt.thur.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit f0153c3d948c1764f6c920a0675d86fc1d75813e upstream.

RME RayDAT and AIO use a fixed buffer size of 16384 samples. With period
sizes of 32-4096, this translates to 4-512 periods.

The older RME cards have a variable buffer size but require exactly two
periods.

This patch enforces nperiods=2 on those cards.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/pci/rme9652/hdspm.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index bc030a2..0627ffe 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -6042,6 +6042,12 @@ static int snd_hdspm_capture_open(struct snd_pcm_substream *substream)
 		snd_pcm_hw_constraint_minmax(runtime,
 					     SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
 					     64, 8192);
+		snd_pcm_hw_constraint_minmax(runtime,
+					     SNDRV_PCM_HW_PARAM_PERIODS,
+					     2, 2);
+		snd_pcm_hw_constraint_minmax(runtime,
+					     SNDRV_PCM_HW_PARAM_PERIODS,
+					     2, 2);
 		break;
 	}
 
-- 
1.9.1

[PATCH 3.4 036/172] jffs2: fix handling of corrupted summary length

[lizf]

From: Chen Jie <chenjie6@huawei.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 164c24063a3eadee11b46575c5482b2f1417be49 upstream.

sm->offset maybe wrong but magic maybe right, the offset do not have CRC.

Badness at c00c7580 [verbose debug info unavailable]
NIP: c00c7580 LR: c00c718c CTR: 00000014
REGS: df07bb40 TRAP: 0700   Not tainted  (2.6.34.13-WR4.3.0.0_standard)
MSR: 00029000 <EE,ME,CE>  CR: 22084f84  XER: 00000000
TASK = df84d6e0[908] 'mount' THREAD: df07a000
GPR00: 00000001 df07bbf0 df84d6e0 00000000 00000001 00000000 df07bb58 00000041
GPR08: 00000041 c0638860 00000000 00000010 22084f88 100636c8 df814ff8 00000000
GPR16: df84d6e0 dfa558cc c05adb90 00000048 c0452d30 00000000 000240d0 000040d0
GPR24: 00000014 c05ae734 c05be2e0 00000000 00000001 00000000 00000000 c05ae730
NIP [c00c7580] __alloc_pages_nodemask+0x4d0/0x638
LR [c00c718c] __alloc_pages_nodemask+0xdc/0x638
Call Trace:
[df07bbf0] [c00c718c] __alloc_pages_nodemask+0xdc/0x638 (unreliable)
[df07bc90] [c00c7708] __get_free_pages+0x20/0x48
[df07bca0] [c00f4a40] __kmalloc+0x15c/0x1ec
[df07bcd0] [c01fc880] jffs2_scan_medium+0xa58/0x14d0
[df07bd70] [c01ff38c] jffs2_do_mount_fs+0x1f4/0x6b4
[df07bdb0] [c020144c] jffs2_do_fill_super+0xa8/0x260
[df07bdd0] [c020230c] jffs2_fill_super+0x104/0x184
[df07be00] [c0335814] get_sb_mtd_aux+0x9c/0xec
[df07be20] [c033596c] get_sb_mtd+0x84/0x1e8
[df07be60] [c0201ed0] jffs2_get_sb+0x1c/0x2c
[df07be70] [c0103898] vfs_kern_mount+0x78/0x1e8
[df07bea0] [c0103a58] do_kern_mount+0x40/0x100
[df07bec0] [c011fe90] do_mount+0x240/0x890
[df07bf10] [c0120570] sys_mount+0x90/0xd8
[df07bf40] [c00110d8] ret_from_syscall+0x0/0x4

=== Exception: c01 at 0xff61a34
    LR = 0x100135f0
Instruction dump:
38800005 38600000 48010f41 4bfffe1c 4bfc2d15 4bfffe8c 72e90200 4082fc28
3d20c064 39298860 8809000d 68000001 <0f000000> 2f800000 419efc0c 38000001
mount: mounting /dev/mtdblock3 on /common failed: Input/output error

Signed-off-by: Chen Jie <chenjie6@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/jffs2/scan.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
index 7654e87..9ad5ba4 100644
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -510,6 +510,10 @@ static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblo
 				sumlen = c->sector_size - je32_to_cpu(sm->offset);
 				sumptr = buf + buf_size - sumlen;
 
+				/* sm->offset maybe wrong but MAGIC maybe right */
+				if (sumlen > c->sector_size)
+					goto full_scan;
+
 				/* Now, make sure the summary itself is available */
 				if (sumlen > buf_size) {
 					/* Need to kmalloc for this. */
@@ -544,6 +548,7 @@ static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblo
 		}
 	}
 
+full_scan:
 	buf_ofs = jeb->offset;
 
 	if (!buf_size) {
-- 
1.9.1

[PATCH 3.4 037/172] dm mirror: do not degrade the mirror on discard error

[lizf]

From: Mikulas Patocka <mpatocka@redhat.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit f2ed51ac64611d717d1917820a01930174c2f236 upstream.

It may be possible that a device claims discard support but it rejects
discards with -EOPNOTSUPP.  It happens when using loopback on ext2/ext3
filesystem driven by the ext4 driver.  It may also happen if the
underlying devices are moved from one disk on another.

If discard error happens, we reject the bio with -EOPNOTSUPP, but we do
not degrade the array.

This patch fixes failed test shell/lvconvert-repair-transient.sh in the
lvm2 testsuite if the testsuite is extracted on an ext2 or ext3
filesystem and it is being driven by the ext4 driver.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/md/dm-raid1.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index a3cf259..3afb9cd 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -603,6 +603,15 @@ static void write_callback(unsigned long error, void *context)
 		return;
 	}
 
+	/*
+	 * If the bio is discard, return an error, but do not
+	 * degrade the array.
+	 */
+	if (bio->bi_rw & REQ_DISCARD) {
+		bio_endio(bio, -EOPNOTSUPP);
+		return;
+	}
+
 	for (i = 0; i < ms->nr_mirrors; i++)
 		if (test_bit(i, &error))
 			fail_mirror(ms->mirror + i, DM_RAID1_WRITE_ERROR);
-- 
1.9.1

[PATCH 3.4 038/172] dm io: reject unsupported DISCARD requests with EOPNOTSUPP

[lizf]

From: "Darrick J. Wong" <darrick.wong@oracle.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 37527b869207ad4c208b1e13967d69b8bba1fbf9 upstream.

I created a dm-raid1 device backed by a device that supports DISCARD
and another device that does NOT support DISCARD with the following
dm configuration:

 #  echo '0 2048 mirror core 1 512 2 /dev/sda 0 /dev/sdb 0' | dmsetup create moo
 # lsblk -D
 NAME         DISC-ALN DISC-GRAN DISC-MAX DISC-ZERO
 sda                 0        4K       1G         0
 `-moo (dm-0)        0        4K       1G         0
 sdb                 0        0B       0B         0
 `-moo (dm-0)        0        4K       1G         0

Notice that the mirror device /dev/mapper/moo advertises DISCARD
support even though one of the mirror halves doesn't.

If I issue a DISCARD request (via fstrim, mount -o discard, or ioctl
BLKDISCARD) through the mirror, kmirrord gets stuck in an infinite
loop in do_region() when it tries to issue a DISCARD request to sdb.
The problem is that when we call do_region() against sdb, num_sectors
is set to zero because q->limits.max_discard_sectors is zero.
Therefore, "remaining" never decreases and the loop never terminates.

To fix this: before entering the loop, check for the combination of
REQ_DISCARD and no discard and return -EOPNOTSUPP to avoid hanging up
the mirror device.

This bug was found by the unfortunate coincidence of pvmove and a
discard operation in the RHEL 6.5 kernel; upstream is also affected.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/md/dm-io.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index ea5dd28..d3b1b54 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -299,6 +299,12 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where,
 	struct request_queue *q = bdev_get_queue(where->bdev);
 	sector_t discard_sectors;
 
+	/* Reject unsupported discard requests */
+	if ((rw & REQ_DISCARD) && !blk_queue_discard(q)) {
+		dec_count(io, region, -EOPNOTSUPP);
+		return;
+	}
+
 	/*
 	 * where->count may be zero if rw holds a flush and we need to
 	 * send a zero-sized flush.
-- 
1.9.1

[PATCH 3.4 039/172] ipv6: fix ipv6_cow_metrics for non DST_HOST case

[lizf]

From: Martin KaFai Lau <kafai@fb.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 3b4711757d7903ab6fa88a9e7ab8901b8227da60 upstream.

ipv6_cow_metrics() currently assumes only DST_HOST routes require
dynamic metrics allocation from inetpeer.  The assumption breaks
when ndisc discovered router with RTAX_MTU and RTAX_HOPLIMIT metric.
Refer to ndisc_router_discovery() in ndisc.c and note that dst_metric_set()
is called after the route is created.

This patch creates the metrics array (by calling dst_cow_metrics_generic) in
ipv6_cow_metrics().

Test:
radvd.conf:
interface qemubr0
{
	AdvLinkMTU 1300;
	AdvCurHopLimit 30;

	prefix fd00:face:face:face::/64
	{
		AdvOnLink on;
		AdvAutonomous on;
		AdvRouterAddr off;
	};
};

Before:
[root@qemu1 ~]# ip -6 r show | egrep -v unreachable
fd00:face:face:face::/64 dev eth0  proto kernel  metric 256  expires 27sec
fe80::/64 dev eth0  proto kernel  metric 256
default via fe80::74df:d0ff:fe23:8ef2 dev eth0  proto ra  metric 1024  expires 27sec

After:
[root@qemu1 ~]# ip -6 r show | egrep -v unreachable
fd00:face:face:face::/64 dev eth0  proto kernel  metric 256  expires 27sec mtu 1300
fe80::/64 dev eth0  proto kernel  metric 256  mtu 1300
default via fe80::74df:d0ff:fe23:8ef2 dev eth0  proto ra  metric 1024  expires 27sec mtu 1300 hoplimit 30

Fixes: 8e2ec639173f325 (ipv6: don't use inetpeer to store metrics for routes.)
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/ipv6/route.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index c8643a3..4cfba3d 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -95,7 +95,7 @@ static u32 *ipv6_cow_metrics(struct dst_entry *dst, unsigned long old)
 	u32 *p = NULL;
 
 	if (!(rt->dst.flags & DST_HOST))
-		return NULL;
+		return dst_cow_metrics_generic(dst, old);
 
 	if (!rt->rt6i_peer)
 		rt6_bind_peer(rt, 1);
-- 
1.9.1

[PATCH 3.4 040/172] fixed invalid assignment of 64bit mask to host dma_boundary for scatter gather segment boundary limit.

[lizf]

From: Minh Duc Tran <MinhDuc.Tran@Emulex.Com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit f76a610a8b4b6280eaedf48f3af9d5d74e418b66 upstream.

In reference to bug https://bugzilla.redhat.com/show_bug.cgi?id=1097141
Assert is seen with AMD cpu whenever calling pci_alloc_consistent.

[   29.406183] ------------[ cut here ]------------
[   29.410505] kernel BUG at lib/iommu-helper.c:13!

Signed-off-by: Minh Tran <minh.tran@emulex.com>
Fixes: 6733b39a1301b0b020bbcbf3295852e93e624cb1
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/scsi/be2iscsi/be_main.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 375756f..e88da8d 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -424,7 +424,6 @@ static struct beiscsi_hba *beiscsi_hba_alloc(struct pci_dev *pcidev)
 			"iscsi_host_alloc failed\n");
 		return NULL;
 	}
-	shost->dma_boundary = pcidev->dma_mask;
 	shost->max_id = BE2_MAX_SESSIONS;
 	shost->max_channel = 0;
 	shost->max_cmd_len = BEISCSI_MAX_CMD_LEN;
-- 
1.9.1

[PATCH 3.4 041/172] sg: fix read() error reporting

[lizf]

From: Tony Battersby <tonyb@cybernetics.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 3b524a683af8991b4eab4182b947c65f0ce1421b upstream.

Fix SCSI generic read() incorrectly returning success after detecting an
error.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/scsi/sg.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index eacd46b..fb119ce 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -498,7 +498,7 @@ static ssize_t
 sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp)
 {
 	sg_io_hdr_t *hp = &srp->header;
-	int err = 0;
+	int err = 0, err2;
 	int len;
 
 	if (count < SZ_SG_IO_HDR) {
@@ -527,8 +527,8 @@ sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp)
 		goto err_out;
 	}
 err_out:
-	err = sg_finish_rem_req(srp);
-	return (0 == err) ? count : err;
+	err2 = sg_finish_rem_req(srp);
+	return err ? : err2 ? : count;
 }
 
 static ssize_t
-- 
1.9.1

[PATCH 3.4 042/172] IB/qib: Do not write EEPROM

[lizf]

From: Mitko Haralanov <mitko.haralanov@intel.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 18c0b82a3e4501511b08d0e8676fb08ac08734a3 upstream.

This changeset removes all the code that allows the driver to write to
the EEPROM and update the recorded error counters and power on hours.

These two stats are unused and writing them exposes a timing risk
which could leave the EEPROM in a bad state preventing further normal
operation of the HCA.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/infiniband/hw/qib/qib.h         |   9 +-
 drivers/infiniband/hw/qib/qib_eeprom.c  | 181 --------------------------------
 drivers/infiniband/hw/qib/qib_iba6120.c |   2 -
 drivers/infiniband/hw/qib/qib_iba7220.c |   2 -
 drivers/infiniband/hw/qib/qib_iba7322.c |   2 -
 drivers/infiniband/hw/qib/qib_init.c    |   1 -
 drivers/infiniband/hw/qib/qib_sysfs.c   |  24 -----
 7 files changed, 1 insertion(+), 220 deletions(-)

diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index 6b811e3..c7d4ef1 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -1013,12 +1013,6 @@ struct qib_devdata {
 	/* control high-level access to EEPROM */
 	struct mutex eep_lock;
 	uint64_t traffic_wds;
-	/* active time is kept in seconds, but logged in hours */
-	atomic_t active_time;
-	/* Below are nominal shadow of EEPROM, new since last EEPROM update */
-	uint8_t eep_st_errs[QIB_EEP_LOG_CNT];
-	uint8_t eep_st_new_errs[QIB_EEP_LOG_CNT];
-	uint16_t eep_hrs;
 	/*
 	 * masks for which bits of errs, hwerrs that cause
 	 * each of the counters to increment.
@@ -1235,8 +1229,7 @@ int qib_twsi_blk_rd(struct qib_devdata *dd, int dev, int addr, void *buffer,
 int qib_twsi_blk_wr(struct qib_devdata *dd, int dev, int addr,
 		    const void *buffer, int len);
 void qib_get_eeprom_info(struct qib_devdata *);
-int qib_update_eeprom_log(struct qib_devdata *dd);
-void qib_inc_eeprom_err(struct qib_devdata *dd, u32 eidx, u32 incr);
+#define qib_inc_eeprom_err(dd, eidx, incr)
 void qib_dump_lookup_output_queue(struct qib_devdata *);
 void qib_force_pio_avail_update(struct qib_devdata *);
 void qib_clear_symerror_on_linkup(unsigned long opaque);
diff --git a/drivers/infiniband/hw/qib/qib_eeprom.c b/drivers/infiniband/hw/qib/qib_eeprom.c
index 92d9cfe..161ef71 100644
--- a/drivers/infiniband/hw/qib/qib_eeprom.c
+++ b/drivers/infiniband/hw/qib/qib_eeprom.c
@@ -263,189 +263,8 @@ void qib_get_eeprom_info(struct qib_devdata *dd)
 		qib_dev_err(dd, "Board SN %s did not pass functional "
 			    "test: %s\n", dd->serial, ifp->if_comment);
 
-	memcpy(&dd->eep_st_errs, &ifp->if_errcntp, QIB_EEP_LOG_CNT);
-	/*
-	 * Power-on (actually "active") hours are kept as little-endian value
-	 * in EEPROM, but as seconds in a (possibly as small as 24-bit)
-	 * atomic_t while running.
-	 */
-	atomic_set(&dd->active_time, 0);
-	dd->eep_hrs = ifp->if_powerhour[0] | (ifp->if_powerhour[1] << 8);
-
 done:
 	vfree(buf);
 
 bail:;
 }
-
-/**
- * qib_update_eeprom_log - copy active-time and error counters to eeprom
- * @dd: the qlogic_ib device
- *
- * Although the time is kept as seconds in the qib_devdata struct, it is
- * rounded to hours for re-write, as we have only 16 bits in EEPROM.
- * First-cut code reads whole (expected) struct qib_flash, modifies,
- * re-writes. Future direction: read/write only what we need, assuming
- * that the EEPROM had to have been "good enough" for driver init, and
- * if not, we aren't making it worse.
- *
- */
-int qib_update_eeprom_log(struct qib_devdata *dd)
-{
-	void *buf;
-	struct qib_flash *ifp;
-	int len, hi_water;
-	uint32_t new_time, new_hrs;
-	u8 csum;
-	int ret, idx;
-	unsigned long flags;
-
-	/* first, check if we actually need to do anything. */
-	ret = 0;
-	for (idx = 0; idx < QIB_EEP_LOG_CNT; ++idx) {
-		if (dd->eep_st_new_errs[idx]) {
-			ret = 1;
-			break;
-		}
-	}
-	new_time = atomic_read(&dd->active_time);
-
-	if (ret == 0 && new_time < 3600)
-		goto bail;
-
-	/*
-	 * The quick-check above determined that there is something worthy
-	 * of logging, so get current contents and do a more detailed idea.
-	 * read full flash, not just currently used part, since it may have
-	 * been written with a newer definition
-	 */
-	len = sizeof(struct qib_flash);
-	buf = vmalloc(len);
-	ret = 1;
-	if (!buf) {
-		qib_dev_err(dd, "Couldn't allocate memory to read %u "
-			    "bytes from eeprom for logging\n", len);
-		goto bail;
-	}
-
-	/* Grab semaphore and read current EEPROM. If we get an
-	 * error, let go, but if not, keep it until we finish write.
-	 */
-	ret = mutex_lock_interruptible(&dd->eep_lock);
-	if (ret) {
-		qib_dev_err(dd, "Unable to acquire EEPROM for logging\n");
-		goto free_bail;
-	}
-	ret = qib_twsi_blk_rd(dd, dd->twsi_eeprom_dev, 0, buf, len);
-	if (ret) {
-		mutex_unlock(&dd->eep_lock);
-		qib_dev_err(dd, "Unable read EEPROM for logging\n");
-		goto free_bail;
-	}
-	ifp = (struct qib_flash *)buf;
-
-	csum = flash_csum(ifp, 0);
-	if (csum != ifp->if_csum) {
-		mutex_unlock(&dd->eep_lock);
-		qib_dev_err(dd, "EEPROM cks err (0x%02X, S/B 0x%02X)\n",
-			    csum, ifp->if_csum);
-		ret = 1;
-		goto free_bail;
-	}
-	hi_water = 0;
-	spin_lock_irqsave(&dd->eep_st_lock, flags);
-	for (idx = 0; idx < QIB_EEP_LOG_CNT; ++idx) {
-		int new_val = dd->eep_st_new_errs[idx];
-		if (new_val) {
-			/*
-			 * If we have seen any errors, add to EEPROM values
-			 * We need to saturate at 0xFF (255) and we also
-			 * would need to adjust the checksum if we were
-			 * trying to minimize EEPROM traffic
-			 * Note that we add to actual current count in EEPROM,
-			 * in case it was altered while we were running.
-			 */
-			new_val += ifp->if_errcntp[idx];
-			if (new_val > 0xFF)
-				new_val = 0xFF;
-			if (ifp->if_errcntp[idx] != new_val) {
-				ifp->if_errcntp[idx] = new_val;
-				hi_water = offsetof(struct qib_flash,
-						    if_errcntp) + idx;
-			}
-			/*
-			 * update our shadow (used to minimize EEPROM
-			 * traffic), to match what we are about to write.
-			 */
-			dd->eep_st_errs[idx] = new_val;
-			dd->eep_st_new_errs[idx] = 0;
-		}
-	}
-	/*
-	 * Now update active-time. We would like to round to the nearest hour
-	 * but unless atomic_t are sure to be proper signed ints we cannot,
-	 * because we need to account for what we "transfer" to EEPROM and
-	 * if we log an hour at 31 minutes, then we would need to set
-	 * active_time to -29 to accurately count the _next_ hour.
-	 */
-	if (new_time >= 3600) {
-		new_hrs = new_time / 3600;
-		atomic_sub((new_hrs * 3600), &dd->active_time);
-		new_hrs += dd->eep_hrs;
-		if (new_hrs > 0xFFFF)
-			new_hrs = 0xFFFF;
-		dd->eep_hrs = new_hrs;
-		if ((new_hrs & 0xFF) != ifp->if_powerhour[0]) {
-			ifp->if_powerhour[0] = new_hrs & 0xFF;
-			hi_water = offsetof(struct qib_flash, if_powerhour);
-		}
-		if ((new_hrs >> 8) != ifp->if_powerhour[1]) {
-			ifp->if_powerhour[1] = new_hrs >> 8;
-			hi_water = offsetof(struct qib_flash, if_powerhour) + 1;
-		}
-	}
-	/*
-	 * There is a tiny possibility that we could somehow fail to write
-	 * the EEPROM after updating our shadows, but problems from holding
-	 * the spinlock too long are a much bigger issue.
-	 */
-	spin_unlock_irqrestore(&dd->eep_st_lock, flags);
-	if (hi_water) {
-		/* we made some change to the data, uopdate cksum and write */
-		csum = flash_csum(ifp, 1);
-		ret = eeprom_write_with_enable(dd, 0, buf, hi_water + 1);
-	}
-	mutex_unlock(&dd->eep_lock);
-	if (ret)
-		qib_dev_err(dd, "Failed updating EEPROM\n");
-
-free_bail:
-	vfree(buf);
-bail:
-	return ret;
-}
-
-/**
- * qib_inc_eeprom_err - increment one of the four error counters
- * that are logged to EEPROM.
- * @dd: the qlogic_ib device
- * @eidx: 0..3, the counter to increment
- * @incr: how much to add
- *
- * Each counter is 8-bits, and saturates at 255 (0xFF). They
- * are copied to the EEPROM (aka flash) whenever qib_update_eeprom_log()
- * is called, but it can only be called in a context that allows sleep.
- * This function can be called even at interrupt level.
- */
-void qib_inc_eeprom_err(struct qib_devdata *dd, u32 eidx, u32 incr)
-{
-	uint new_val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dd->eep_st_lock, flags);
-	new_val = dd->eep_st_new_errs[eidx] + incr;
-	if (new_val > 255)
-		new_val = 255;
-	dd->eep_st_new_errs[eidx] = new_val;
-	spin_unlock_irqrestore(&dd->eep_st_lock, flags);
-}
diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c
index d0c64d5..eb60abd 100644
--- a/drivers/infiniband/hw/qib/qib_iba6120.c
+++ b/drivers/infiniband/hw/qib/qib_iba6120.c
@@ -2674,8 +2674,6 @@ static void qib_get_6120_faststats(unsigned long opaque)
 	spin_lock_irqsave(&dd->eep_st_lock, flags);
 	traffic_wds -= dd->traffic_wds;
 	dd->traffic_wds += traffic_wds;
-	if (traffic_wds  >= QIB_TRAFFIC_ACTIVE_THRESHOLD)
-		atomic_add(5, &dd->active_time); /* S/B #define */
 	spin_unlock_irqrestore(&dd->eep_st_lock, flags);
 
 	qib_chk_6120_errormask(dd);
diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c
index 3c722f7..b62c7f2 100644
--- a/drivers/infiniband/hw/qib/qib_iba7220.c
+++ b/drivers/infiniband/hw/qib/qib_iba7220.c
@@ -3292,8 +3292,6 @@ static void qib_get_7220_faststats(unsigned long opaque)
 	spin_lock_irqsave(&dd->eep_st_lock, flags);
 	traffic_wds -= dd->traffic_wds;
 	dd->traffic_wds += traffic_wds;
-	if (traffic_wds  >= QIB_TRAFFIC_ACTIVE_THRESHOLD)
-		atomic_add(5, &dd->active_time); /* S/B #define */
 	spin_unlock_irqrestore(&dd->eep_st_lock, flags);
 done:
 	mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER);
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index d252053..0d8e348 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -4841,8 +4841,6 @@ static void qib_get_7322_faststats(unsigned long opaque)
 		spin_lock_irqsave(&ppd->dd->eep_st_lock, flags);
 		traffic_wds -= ppd->dd->traffic_wds;
 		ppd->dd->traffic_wds += traffic_wds;
-		if (traffic_wds >= QIB_TRAFFIC_ACTIVE_THRESHOLD)
-			atomic_add(ACTIVITY_TIMER, &ppd->dd->active_time);
 		spin_unlock_irqrestore(&ppd->dd->eep_st_lock, flags);
 		if (ppd->cpspec->qdr_dfe_on && (ppd->link_speed_active &
 						QIB_IB_QDR) &&
diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c
index cf0cd30..0776dd0 100644
--- a/drivers/infiniband/hw/qib/qib_init.c
+++ b/drivers/infiniband/hw/qib/qib_init.c
@@ -765,7 +765,6 @@ static void qib_shutdown_device(struct qib_devdata *dd)
 		dd->f_quiet_serdes(ppd);
 	}
 
-	qib_update_eeprom_log(dd);
 }
 
 /**
diff --git a/drivers/infiniband/hw/qib/qib_sysfs.c b/drivers/infiniband/hw/qib/qib_sysfs.c
index dae5160..c01cb11 100644
--- a/drivers/infiniband/hw/qib/qib_sysfs.c
+++ b/drivers/infiniband/hw/qib/qib_sysfs.c
@@ -550,28 +550,6 @@ bail:
 	return ret < 0 ? ret : count;
 }
 
-static ssize_t show_logged_errs(struct device *device,
-				struct device_attribute *attr, char *buf)
-{
-	struct qib_ibdev *dev =
-		container_of(device, struct qib_ibdev, ibdev.dev);
-	struct qib_devdata *dd = dd_from_dev(dev);
-	int idx, count;
-
-	/* force consistency with actual EEPROM */
-	if (qib_update_eeprom_log(dd) != 0)
-		return -ENXIO;
-
-	count = 0;
-	for (idx = 0; idx < QIB_EEP_LOG_CNT; ++idx) {
-		count += scnprintf(buf + count, PAGE_SIZE - count, "%d%c",
-				   dd->eep_st_errs[idx],
-				   idx == (QIB_EEP_LOG_CNT - 1) ? '\n' : ' ');
-	}
-
-	return count;
-}
-
 /*
  * Dump tempsense regs. in decimal, to ease shell-scripts.
  */
@@ -618,7 +596,6 @@ static DEVICE_ATTR(nctxts, S_IRUGO, show_nctxts, NULL);
 static DEVICE_ATTR(nfreectxts, S_IRUGO, show_nfreectxts, NULL);
 static DEVICE_ATTR(serial, S_IRUGO, show_serial, NULL);
 static DEVICE_ATTR(boardversion, S_IRUGO, show_boardversion, NULL);
-static DEVICE_ATTR(logged_errors, S_IRUGO, show_logged_errs, NULL);
 static DEVICE_ATTR(tempsense, S_IRUGO, show_tempsense, NULL);
 static DEVICE_ATTR(localbus_info, S_IRUGO, show_localbus_info, NULL);
 static DEVICE_ATTR(chip_reset, S_IWUSR, NULL, store_chip_reset);
@@ -632,7 +609,6 @@ static struct device_attribute *qib_attributes[] = {
 	&dev_attr_nfreectxts,
 	&dev_attr_serial,
 	&dev_attr_boardversion,
-	&dev_attr_logged_errors,
 	&dev_attr_tempsense,
 	&dev_attr_localbus_info,
 	&dev_attr_chip_reset,
-- 
1.9.1

[PATCH 3.4 043/172] dm: fix a race condition in dm_get_md

[lizf]

From: Mikulas Patocka <mpatocka@redhat.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 2bec1f4a8832e74ebbe859f176d8a9cb20dd97f4 upstream.

The function dm_get_md finds a device mapper device with a given dev_t,
increases the reference count and returns the pointer.

dm_get_md calls dm_find_md, dm_find_md takes _minor_lock, finds the
device, tests that the device doesn't have DMF_DELETING or DMF_FREEING
flag, drops _minor_lock and returns pointer to the device. dm_get_md then
calls dm_get. dm_get calls BUG if the device has the DMF_FREEING flag,
otherwise it increments the reference count.

There is a possible race condition - after dm_find_md exits and before
dm_get is called, there are no locks held, so the device may disappear or
DMF_FREEING flag may be set, which results in BUG.

To fix this bug, we need to call dm_get while we hold _minor_lock. This
patch renames dm_find_md to dm_get_md and changes it so that it calls
dm_get while holding the lock.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/md/dm.c | 27 ++++++++++-----------------
 1 file changed, 10 insertions(+), 17 deletions(-)

diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 0cf8c51..8780a22 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2232,7 +2232,7 @@ int dm_setup_md_queue(struct mapped_device *md)
 	return 0;
 }
 
-static struct mapped_device *dm_find_md(dev_t dev)
+struct mapped_device *dm_get_md(dev_t dev)
 {
 	struct mapped_device *md;
 	unsigned minor = MINOR(dev);
@@ -2243,12 +2243,15 @@ static struct mapped_device *dm_find_md(dev_t dev)
 	spin_lock(&_minor_lock);
 
 	md = idr_find(&_minor_idr, minor);
-	if (md && (md == MINOR_ALLOCED ||
-		   (MINOR(disk_devt(dm_disk(md))) != minor) ||
-		   dm_deleting_md(md) ||
-		   test_bit(DMF_FREEING, &md->flags))) {
-		md = NULL;
-		goto out;
+	if (md) {
+		if ((md == MINOR_ALLOCED ||
+		     (MINOR(disk_devt(dm_disk(md))) != minor) ||
+		     dm_deleting_md(md) ||
+		     test_bit(DMF_FREEING, &md->flags))) {
+			md = NULL;
+			goto out;
+		}
+		dm_get(md);
 	}
 
 out:
@@ -2256,16 +2259,6 @@ out:
 
 	return md;
 }
-
-struct mapped_device *dm_get_md(dev_t dev)
-{
-	struct mapped_device *md = dm_find_md(dev);
-
-	if (md)
-		dm_get(md);
-
-	return md;
-}
 EXPORT_SYMBOL_GPL(dm_get_md);
 
 void *dm_get_mdptr(struct mapped_device *md)
-- 
1.9.1

[PATCH 3.4 044/172] dm snapshot: fix a possible invalid memory access on unload

[lizf]

From: Mikulas Patocka <mpatocka@redhat.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 22aa66a3ee5b61e0f4a0bfeabcaa567861109ec3 upstream.

When the snapshot target is unloaded, snapshot_dtr() waits until
pending_exceptions_count drops to zero.  Then, it destroys the snapshot.
Therefore, the function that decrements pending_exceptions_count
should not touch the snapshot structure after the decrement.

pending_complete() calls free_pending_exception(), which decrements
pending_exceptions_count, and then it performs up_write(&s->lock) and it
calls retry_origin_bios() which dereferences  s->origin.  These two
memory accesses to the fields of the snapshot may touch the dm_snapshot
struture after it is freed.

This patch moves the call to free_pending_exception() to the end of
pending_complete(), so that the snapshot will not be destroyed while
pending_complete() is in progress.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/md/dm-snap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c
index b092338..696a16b 100644
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -1444,8 +1444,6 @@ out:
 		full_bio->bi_end_io = pe->full_bio_end_io;
 		full_bio->bi_private = pe->full_bio_private;
 	}
-	free_pending_exception(pe);
-
 	increment_pending_exceptions_done_count();
 
 	up_write(&s->lock);
@@ -1462,6 +1460,8 @@ out:
 	}
 
 	retry_origin_bios(s, origin_bios);
+
+	free_pending_exception(pe);
 }
 
 static void commit_callback(void *context, int success)
-- 
1.9.1

[PATCH 3.4 045/172] kdb: fix incorrect counts in KDB summary command output

[lizf]

From: Jay Lan <jlan@sgi.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 146755923262037fc4c54abc28c04b1103f3cc51 upstream.

The output of KDB 'summary' command should report MemTotal, MemFree
and Buffers output in kB. Current codes report in unit of pages.

A define of K(x) as
is defined in the code, but not used.

This patch would apply the define to convert the values to kB.
Please include me on Cc on replies. I do not subscribe to linux-kernel.

Signed-off-by: Jay Lan <jlan@sgi.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 kernel/debug/kdb/kdb_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index 67b847d..d1342c2 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -2598,7 +2598,7 @@ static int kdb_summary(int argc, const char **argv)
 #define K(x) ((x) << (PAGE_SHIFT - 10))
 	kdb_printf("\nMemTotal:       %8lu kB\nMemFree:        %8lu kB\n"
 		   "Buffers:        %8lu kB\n",
-		   val.totalram, val.freeram, val.bufferram);
+		   K(val.totalram), K(val.freeram), K(val.bufferram));
 	return 0;
 }
 
-- 
1.9.1

[PATCH 3.4 046/172] debugfs: leave freeing a symlink body until inode eviction

[lizf]

From: Al Viro <viro@zeniv.linux.org.uk>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 0db59e59299f0b67450c5db21f7f316c8fb04e84 upstream.

As it is, we have debugfs_remove() racing with symlink traversals.
Supply ->evict_inode() and do freeing there - inode will remain
pinned until we are done with the symlink body.

And rip the idiocy with checking if dentry is positive right after
we'd verified debugfs_positive(), which is a stronger check...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[lizf: Backported to 3.4:
 - call end_writeback() instead of clear_inode()
 - call truncate_inode_pages() instead of truncate_inode_pages_final()]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/debugfs/inode.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index 47d64e9..7b65755 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -238,10 +238,19 @@ static int debugfs_show_options(struct seq_file *m, struct dentry *root)
 	return 0;
 }
 
+static void debugfs_evict_inode(struct inode *inode)
+{
+	truncate_inode_pages(&inode->i_data, 0);
+	end_writeback(inode);
+	if (S_ISLNK(inode->i_mode))
+		kfree(inode->i_private);
+}
+
 static const struct super_operations debugfs_super_operations = {
 	.statfs		= simple_statfs,
 	.remount_fs	= debugfs_remount,
 	.show_options	= debugfs_show_options,
+	.evict_inode	= debugfs_evict_inode,
 };
 
 static int debug_fill_super(struct super_block *sb, void *data, int silent)
@@ -459,23 +468,14 @@ static int __debugfs_remove(struct dentry *dentry, struct dentry *parent)
 	int ret = 0;
 
 	if (debugfs_positive(dentry)) {
-		if (dentry->d_inode) {
-			dget(dentry);
-			switch (dentry->d_inode->i_mode & S_IFMT) {
-			case S_IFDIR:
-				ret = simple_rmdir(parent->d_inode, dentry);
-				break;
-			case S_IFLNK:
-				kfree(dentry->d_inode->i_private);
-				/* fall through */
-			default:
-				simple_unlink(parent->d_inode, dentry);
-				break;
-			}
-			if (!ret)
-				d_delete(dentry);
-			dput(dentry);
-		}
+		dget(dentry);
+		if (S_ISDIR(dentry->d_inode->i_mode))
+			ret = simple_rmdir(parent->d_inode, dentry);
+		else
+			simple_unlink(parent->d_inode, dentry);
+		if (!ret)
+			d_delete(dentry);
+		dput(dentry);
 	}
 	return ret;
 }
-- 
1.9.1

[PATCH 3.4 047/172] autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation

[lizf]

From: Al Viro <viro@zeniv.linux.org.uk>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 0a280962dc6e117e0e4baa668453f753579265d9 upstream.

X-Coverup: just ask spender
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/autofs4/dev-ioctl.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index aa9103f..fbaa428 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -95,7 +95,7 @@ static int check_dev_ioctl_version(int cmd, struct autofs_dev_ioctl *param)
  */
 static struct autofs_dev_ioctl *copy_dev_ioctl(struct autofs_dev_ioctl __user *in)
 {
-	struct autofs_dev_ioctl tmp;
+	struct autofs_dev_ioctl tmp, *res;
 
 	if (copy_from_user(&tmp, in, sizeof(tmp)))
 		return ERR_PTR(-EFAULT);
@@ -103,7 +103,11 @@ static struct autofs_dev_ioctl *copy_dev_ioctl(struct autofs_dev_ioctl __user *i
 	if (tmp.size < sizeof(tmp))
 		return ERR_PTR(-EINVAL);
 
-	return memdup_user(in, tmp.size);
+	res = memdup_user(in, tmp.size);
+	if (!IS_ERR(res))
+		res->size = tmp.size;
+
+	return res;
 }
 
 static inline void free_dev_ioctl(struct autofs_dev_ioctl *param)
-- 
1.9.1

[PATCH 3.4 048/172] gpio: tps65912: fix wrong container_of arguments

[lizf]

From: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 2f97c20e5f7c3582c7310f65a04465bfb0fd0e85 upstream.

The gpio_chip operations receive a pointer the gpio_chip struct which is
contained in the driver's private struct, yet the container_of call in those
functions point to the mfd struct defined in include/linux/mfd/tps65912.h.

Signed-off-by: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/gpio/gpio-tps65912.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-tps65912.c b/drivers/gpio/gpio-tps65912.c
index 79e66c0..2712680 100644
--- a/drivers/gpio/gpio-tps65912.c
+++ b/drivers/gpio/gpio-tps65912.c
@@ -26,9 +26,12 @@ struct tps65912_gpio_data {
 	struct gpio_chip gpio_chip;
 };
 
+#define to_tgd(gc) container_of(gc, struct tps65912_gpio_data, gpio_chip)
+
 static int tps65912_gpio_get(struct gpio_chip *gc, unsigned offset)
 {
-	struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+	struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+	struct tps65912 *tps65912 = tps65912_gpio->tps65912;
 	int val;
 
 	val = tps65912_reg_read(tps65912, TPS65912_GPIO1 + offset);
@@ -42,7 +45,8 @@ static int tps65912_gpio_get(struct gpio_chip *gc, unsigned offset)
 static void tps65912_gpio_set(struct gpio_chip *gc, unsigned offset,
 			      int value)
 {
-	struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+	struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+	struct tps65912 *tps65912 = tps65912_gpio->tps65912;
 
 	if (value)
 		tps65912_set_bits(tps65912, TPS65912_GPIO1 + offset,
@@ -55,7 +59,8 @@ static void tps65912_gpio_set(struct gpio_chip *gc, unsigned offset,
 static int tps65912_gpio_output(struct gpio_chip *gc, unsigned offset,
 				int value)
 {
-	struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+	struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+	struct tps65912 *tps65912 = tps65912_gpio->tps65912;
 
 	/* Set the initial value */
 	tps65912_gpio_set(gc, offset, value);
@@ -66,7 +71,8 @@ static int tps65912_gpio_output(struct gpio_chip *gc, unsigned offset,
 
 static int tps65912_gpio_input(struct gpio_chip *gc, unsigned offset)
 {
-	struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+	struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+	struct tps65912 *tps65912 = tps65912_gpio->tps65912;
 
 	return tps65912_clear_bits(tps65912, TPS65912_GPIO1 + offset,
 								GPIO_CFG_MASK);
-- 
1.9.1

[PATCH 3.4 049/172] ALSA: pcm: Don't leave PREPARED state after draining

[lizf]

From: Takashi Iwai <tiwai@suse.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 70372a7566b5e552dbe48abdac08c275081d8558 upstream.

When a PCM draining is performed to an empty stream that has been
already in PREPARED state, the current code just ignores and leaves as
it is, although the drain is supposed to set all such streams to SETUP
state.  This patch covers that overlooked case.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/core/pcm_native.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 3a90793..65195a1 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1382,6 +1382,8 @@ static int snd_pcm_do_drain_init(struct snd_pcm_substream *substream, int state)
 			if (! snd_pcm_playback_empty(substream)) {
 				snd_pcm_do_start(substream, SNDRV_PCM_STATE_DRAINING);
 				snd_pcm_post_start(substream, SNDRV_PCM_STATE_DRAINING);
+			} else {
+				runtime->status->state = SNDRV_PCM_STATE_SETUP;
 			}
 			break;
 		case SNDRV_PCM_STATE_RUNNING:
-- 
1.9.1

[PATCH 3.4 050/172] nilfs2: fix potential memory overrun on inode

[lizf]

From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 957ed60b53b519064a54988c4e31e0087e47d091 upstream.

Each inode of nilfs2 stores a root node of a b-tree, and it turned out to
have a memory overrun issue:

Each b-tree node of nilfs2 stores a set of key-value pairs and the number
of them (in "bn_nchildren" member of nilfs_btree_node struct), as well as
a few other "bn_*" members.

Since the value of "bn_nchildren" is used for operations on the key-values
within the b-tree node, it can cause memory access overrun if a large
number is incorrectly set to "bn_nchildren".

For instance, nilfs_btree_node_lookup() function determines the range of
binary search with it, and too large "bn_nchildren" leads
nilfs_btree_node_get_key() in that function to overrun.

As for intermediate b-tree nodes, this is prevented by a sanity check
performed when each node is read from a drive, however, no sanity check
has been done for root nodes stored in inodes.

This patch fixes the issue by adding missing sanity check against b-tree
root nodes so that it's called when on-memory inodes are read from ifile,
inode metadata file.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/nilfs2/btree.c | 47 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 44 insertions(+), 3 deletions(-)

diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c
index b2e3ff3..ecdbae1 100644
--- a/fs/nilfs2/btree.c
+++ b/fs/nilfs2/btree.c
@@ -31,6 +31,8 @@
 #include "alloc.h"
 #include "dat.h"
 
+static void __nilfs_btree_init(struct nilfs_bmap *bmap);
+
 static struct nilfs_btree_path *nilfs_btree_alloc_path(void)
 {
 	struct nilfs_btree_path *path;
@@ -368,6 +370,34 @@ static int nilfs_btree_node_broken(const struct nilfs_btree_node *node,
 	return ret;
 }
 
+/**
+ * nilfs_btree_root_broken - verify consistency of btree root node
+ * @node: btree root node to be examined
+ * @ino: inode number
+ *
+ * Return Value: If node is broken, 1 is returned. Otherwise, 0 is returned.
+ */
+static int nilfs_btree_root_broken(const struct nilfs_btree_node *node,
+				   unsigned long ino)
+{
+	int level, flags, nchildren;
+	int ret = 0;
+
+	level = nilfs_btree_node_get_level(node);
+	flags = nilfs_btree_node_get_flags(node);
+	nchildren = nilfs_btree_node_get_nchildren(node);
+
+	if (unlikely(level < NILFS_BTREE_LEVEL_NODE_MIN ||
+		     level > NILFS_BTREE_LEVEL_MAX ||
+		     nchildren < 0 ||
+		     nchildren > NILFS_BTREE_ROOT_NCHILDREN_MAX)) {
+		pr_crit("NILFS: bad btree root (inode number=%lu): level = %d, flags = 0x%x, nchildren = %d\n",
+			ino, level, flags, nchildren);
+		ret = 1;
+	}
+	return ret;
+}
+
 int nilfs_btree_broken_node_block(struct buffer_head *bh)
 {
 	int ret;
@@ -1713,7 +1743,7 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *btree,
 
 	/* convert and insert */
 	dat = NILFS_BMAP_USE_VBN(btree) ? nilfs_bmap_get_dat(btree) : NULL;
-	nilfs_btree_init(btree);
+	__nilfs_btree_init(btree);
 	if (nreq != NULL) {
 		nilfs_bmap_commit_alloc_ptr(btree, dreq, dat);
 		nilfs_bmap_commit_alloc_ptr(btree, nreq, dat);
@@ -2294,12 +2324,23 @@ static const struct nilfs_bmap_operations nilfs_btree_ops_gc = {
 	.bop_gather_data	=	NULL,
 };
 
-int nilfs_btree_init(struct nilfs_bmap *bmap)
+static void __nilfs_btree_init(struct nilfs_bmap *bmap)
 {
 	bmap->b_ops = &nilfs_btree_ops;
 	bmap->b_nchildren_per_block =
 		NILFS_BTREE_NODE_NCHILDREN_MAX(nilfs_btree_node_size(bmap));
-	return 0;
+}
+
+int nilfs_btree_init(struct nilfs_bmap *bmap)
+{
+	int ret = 0;
+
+	__nilfs_btree_init(bmap);
+
+	if (nilfs_btree_root_broken(nilfs_btree_get_root(bmap),
+				    bmap->b_inode->i_ino))
+		ret = -EIO;
+	return ret;
 }
 
 void nilfs_btree_init_gc(struct nilfs_bmap *bmap)
-- 
1.9.1

[PATCH 3.4 051/172] netfilter: xt_socket: fix a stack corruption bug

[lizf]

From: Eric Dumazet <edumazet@google.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 78296c97ca1fd3b104f12e1f1fbc06c46635990b upstream.

As soon as extract_icmp6_fields() returns, its local storage (automatic
variables) is deallocated and can be overwritten.

Lets add an additional parameter to make sure storage is valid long
enough.

While we are at it, adds some const qualifiers.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: b64c9256a9b76 ("tproxy: added IPv6 support to the socket match")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/netfilter/xt_socket.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/net/netfilter/xt_socket.c b/net/netfilter/xt_socket.c
index 72bb07f..eb5086c 100644
--- a/net/netfilter/xt_socket.c
+++ b/net/netfilter/xt_socket.c
@@ -205,12 +205,13 @@ static int
 extract_icmp6_fields(const struct sk_buff *skb,
 		     unsigned int outside_hdrlen,
 		     int *protocol,
-		     struct in6_addr **raddr,
-		     struct in6_addr **laddr,
+		     const struct in6_addr **raddr,
+		     const struct in6_addr **laddr,
 		     __be16 *rport,
-		     __be16 *lport)
+		     __be16 *lport,
+		     struct ipv6hdr *ipv6_var)
 {
-	struct ipv6hdr *inside_iph, _inside_iph;
+	const struct ipv6hdr *inside_iph;
 	struct icmp6hdr *icmph, _icmph;
 	__be16 *ports, _ports[2];
 	u8 inside_nexthdr;
@@ -225,12 +226,14 @@ extract_icmp6_fields(const struct sk_buff *skb,
 	if (icmph->icmp6_type & ICMPV6_INFOMSG_MASK)
 		return 1;
 
-	inside_iph = skb_header_pointer(skb, outside_hdrlen + sizeof(_icmph), sizeof(_inside_iph), &_inside_iph);
+	inside_iph = skb_header_pointer(skb, outside_hdrlen + sizeof(_icmph),
+					sizeof(*ipv6_var), ipv6_var);
 	if (inside_iph == NULL)
 		return 1;
 	inside_nexthdr = inside_iph->nexthdr;
 
-	inside_hdrlen = ipv6_skip_exthdr(skb, outside_hdrlen + sizeof(_icmph) + sizeof(_inside_iph),
+	inside_hdrlen = ipv6_skip_exthdr(skb, outside_hdrlen + sizeof(_icmph) +
+					      sizeof(*ipv6_var),
 					 &inside_nexthdr, &inside_fragoff);
 	if (inside_hdrlen < 0)
 		return 1; /* hjm: Packet has no/incomplete transport layer headers. */
@@ -258,10 +261,10 @@ extract_icmp6_fields(const struct sk_buff *skb,
 static bool
 socket_mt6_v1(const struct sk_buff *skb, struct xt_action_param *par)
 {
-	struct ipv6hdr *iph = ipv6_hdr(skb);
+	struct ipv6hdr ipv6_var, *iph = ipv6_hdr(skb);
 	struct udphdr _hdr, *hp = NULL;
 	struct sock *sk;
-	struct in6_addr *daddr, *saddr;
+	const struct in6_addr *daddr, *saddr;
 	__be16 dport, sport;
 	int thoff, tproto;
 	const struct xt_socket_mtinfo1 *info = (struct xt_socket_mtinfo1 *) par->matchinfo;
@@ -285,7 +288,7 @@ socket_mt6_v1(const struct sk_buff *skb, struct xt_action_param *par)
 
 	} else if (tproto == IPPROTO_ICMPV6) {
 		if (extract_icmp6_fields(skb, thoff, &tproto, &saddr, &daddr,
-					 &sport, &dport))
+					 &sport, &dport, &ipv6_var))
 			return false;
 	} else {
 		return false;
-- 
1.9.1

[PATCH 3.4 052/172] team: fix possible null pointer dereference in team_handle_frame

[lizf]

From: Jiri Pirko <jiri@resnulli.us>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 57e595631904c827cfa1a0f7bbd7cc9a49da5745 upstream.

Currently following race is possible in team:

CPU0                                        CPU1
                                            team_port_del
                                              team_upper_dev_unlink
                                                priv_flags &= ~IFF_TEAM_PORT
team_handle_frame
  team_port_get_rcu
    team_port_exists
      priv_flags & IFF_TEAM_PORT == 0
    return NULL (instead of port got
                 from rx_handler_data)
                                              netdev_rx_handler_unregister

The thing is that the flag is removed before rx_handler is unregistered.
If team_handle_frame is called in between, team_port_exists returns 0
and team_port_get_rcu will return NULL.
So do not check the flag here. It is guaranteed by netdev_rx_handler_unregister
that team_handle_frame will always see valid rx_handler_data pointer.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/net/team/team.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index d16800f..56299e9 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -39,9 +39,7 @@
 
 static struct team_port *team_port_get_rcu(const struct net_device *dev)
 {
-	struct team_port *port = rcu_dereference(dev->rx_handler_data);
-
-	return team_port_exists(dev) ? port : NULL;
+	return rcu_dereference(dev->rx_handler_data);
 }
 
 static struct team_port *team_port_get_rtnl(const struct net_device *dev)
-- 
1.9.1

[PATCH 3.4 053/172] KVM: emulate: fix CMPXCHG8B on 32-bit hosts

[lizf]

From: Paolo Bonzini <pbonzini@redhat.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 4ff6f8e61eb7f96d3ca535c6d240f863ccd6fb7d upstream.

This has been broken for a long time: it broke first in 2.6.35, then was
almost fixed in 2.6.36 but this one-liner slipped through the cracks.
The bug shows up as an infinite loop in Windows 7 (and newer) boot on
32-bit hosts without EPT.

Windows uses CMPXCHG8B to write to page tables, which causes a
page fault if running without EPT; the emulator is then called from
kvm_mmu_page_fault.  The loop then happens if the higher 4 bytes are
not 0; the common case for this is that the NX bit (bit 63) is 1.

Fixes: 6550e1f165f384f3a46b60a1be9aba4bc3c2adad
Fixes: 16518d5ada690643453eb0aef3cc7841d3623c2d
Reported-by: Erik Rull <erik.rull@rdsoftware.de>
Tested-by: Erik Rull <erik.rull@rdsoftware.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/x86/kvm/emulate.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 91e8680..db08e66 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -4246,7 +4246,8 @@ int x86_emulate_insn(struct x86_emulate_ctxt *ctxt)
 		if (rc != X86EMUL_CONTINUE)
 			goto done;
 	}
-	ctxt->dst.orig_val = ctxt->dst.val;
+	/* Copy full 64-bit value for CMPXCHG8B.  */
+	ctxt->dst.orig_val64 = ctxt->dst.val64;
 
 special_insn:
 
-- 
1.9.1

[PATCH 3.4 054/172] xhci: Allocate correct amount of scratchpad buffers

[lizf]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 6596a926b0b6c80b730a1dd2fa91908e0a539c37 upstream.

Include the high order bit fields for Max scratchpad buffers when
calculating how many scratchpad buffers are needed.

I'm suprised this hasn't caused more issues, we never allocated more than
32 buffers even if xhci needed more. Either we got lucky and xhci never
really used past that area, or then we got enough zeroed dma memory anyway.

Should be backported as far back as possible

Reported-by: Tim Chen <tim.c.chen@linux.intel.com>
Tested-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/host/xhci.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 6c809350..ed20062 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -88,9 +88,10 @@ struct xhci_cap_regs {
 #define HCS_IST(p)		(((p) >> 0) & 0xf)
 /* bits 4:7, max number of Event Ring segments */
 #define HCS_ERST_MAX(p)		(((p) >> 4) & 0xf)
+/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */
 /* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
-/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
-#define HCS_MAX_SCRATCHPAD(p)   (((p) >> 27) & 0x1f)
+/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */
+#define HCS_MAX_SCRATCHPAD(p)   ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f))
 
 /* HCSPARAMS3 - hcs_params3 - bitmasks */
 /* bits 0:7, Max U1 to U0 latency for the roothub ports */
-- 
1.9.1

[PATCH 3.4 055/172] USB: usbfs: don't leak kernel data in siginfo

[lizf]

From: Alan Stern <stern@rowland.harvard.edu>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit f0c2b68198589249afd2b1f2c4e8de8c03e19c16 upstream.

When a signal is delivered, the information in the siginfo structure
is copied to userspace.  Good security practice dicatates that the
unused fields in this structure should be initialized to 0 so that
random kernel stack data isn't exposed to the user.  This patch adds
such an initialization to the two places where usbfs raises signals.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Dave Mielke <dave@mielke.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/core/devio.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 371fe69..d2ae3d9 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -444,6 +444,7 @@ static void async_completed(struct urb *urb)
 	as->status = urb->status;
 	signr = as->signr;
 	if (signr) {
+		memset(&sinfo, 0, sizeof(sinfo));
 		sinfo.si_signo = as->signr;
 		sinfo.si_errno = as->status;
 		sinfo.si_code = SI_ASYNCIO;
@@ -2091,6 +2092,7 @@ static void usbdev_remove(struct usb_device *udev)
 		wake_up_all(&ps->wait);
 		list_del_init(&ps->list);
 		if (ps->discsignr) {
+			memset(&sinfo, 0, sizeof(sinfo));
 			sinfo.si_signo = ps->discsignr;
 			sinfo.si_errno = EPIPE;
 			sinfo.si_code = SI_ASYNCIO;
-- 
1.9.1

[PATCH 3.4 056/172] USB: ftdi_sio: add PIDs for Actisense USB devices

[lizf]

From: Mark Glover <mark@actisense.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit f6950344d3cf4a1e231b5828b50c4ac168db3886 upstream.

These product identifiers (PID) all deal with marine NMEA format data
used on motor boats and yachts. We supply the programmed devices to
Chetco, for use inside their equipment. The PIDs are a direct copy of
our Windows device drivers (FTDI drivers with altered PIDs).

Signed-off-by: Mark Glover <mark@actisense.com>
[johan: edit commit message slightly ]
Signed-off-by: Johan Hovold <johan@kernel.org>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/serial/ftdi_sio.c     | 17 +++++++++++++++++
 drivers/usb/serial/ftdi_sio_ids.h | 20 ++++++++++++++++++++
 2 files changed, 37 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4bfcfa7..8441cec 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1000,6 +1000,23 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
 	/* GE Healthcare devices */
 	{ USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
+	/* Active Research (Actisense) devices */
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_NDC_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_USG_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_NGT_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_NGW_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AC_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AD_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AE_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AF_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEAGAUGE_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASWITCH_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_NMEA2000_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ETHERNET_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_WIFI_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index ecb4dee..eba7360 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1432,3 +1432,23 @@
  */
 #define GE_HEALTHCARE_VID		0x1901
 #define GE_HEALTHCARE_NEMO_TRACKER_PID	0x0015
+
+/*
+ * Active Research (Actisense) devices
+ */
+#define ACTISENSE_NDC_PID		0xD9A8 /* NDC USB Serial Adapter */
+#define ACTISENSE_USG_PID		0xD9A9 /* USG USB Serial Adapter */
+#define ACTISENSE_NGT_PID		0xD9AA /* NGT NMEA2000 Interface */
+#define ACTISENSE_NGW_PID		0xD9AB /* NGW NMEA2000 Gateway */
+#define ACTISENSE_D9AC_PID		0xD9AC /* Actisense Reserved */
+#define ACTISENSE_D9AD_PID		0xD9AD /* Actisense Reserved */
+#define ACTISENSE_D9AE_PID		0xD9AE /* Actisense Reserved */
+#define ACTISENSE_D9AF_PID		0xD9AF /* Actisense Reserved */
+#define CHETCO_SEAGAUGE_PID		0xA548 /* SeaGauge USB Adapter */
+#define CHETCO_SEASWITCH_PID		0xA549 /* SeaSwitch USB Adapter */
+#define CHETCO_SEASMART_NMEA2000_PID	0xA54A /* SeaSmart NMEA2000 Gateway */
+#define CHETCO_SEASMART_ETHERNET_PID	0xA54B /* SeaSmart Ethernet Gateway */
+#define CHETCO_SEASMART_WIFI_PID	0xA5AC /* SeaSmart Wifi Gateway */
+#define CHETCO_SEASMART_DISPLAY_PID	0xA5AD /* SeaSmart NMEA2000 Display */
+#define CHETCO_SEASMART_LITE_PID	0xA5AE /* SeaSmart Lite USB Adapter */
+#define CHETCO_SEASMART_ANALOG_PID	0xA5AF /* SeaSmart Analog Adapter */
-- 
1.9.1

[PATCH 3.4 057/172] USB: serial: fix potential use-after-free after failed probe

[lizf]

From: Johan Hovold <johan@kernel.org>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 07fdfc5e9f1c966be8722e8fa927e5ea140df5ce upstream.

Fix return value in probe error path, which could end up returning
success (0) on errors. This could in turn lead to use-after-free or
double free (e.g. in port_remove) when the port device is removed.

Fixes: c706ebdfc895 ("USB: usb-serial: call port_probe and port_remove
at the right times")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Greg Kroah-Hartman <greg@kroah.com>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/serial/bus.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index ed8adb0..1b59665 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -71,7 +71,7 @@ static int usb_serial_device_probe(struct device *dev)
 	retval = device_create_file(dev, &dev_attr_port_number);
 	if (retval) {
 		if (driver->port_remove)
-			retval = driver->port_remove(port);
+			driver->port_remove(port);
 		goto exit;
 	}
 
-- 
1.9.1

[PATCH 3.4 058/172] USB: serial: fix tty-device error handling at probe

[lizf]

From: Johan Hovold <johan@kernel.org>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit ca4383a3947a83286bc9b9c598a1f55e867871d7 upstream.

Add missing error handling when registering the tty device at port
probe. This avoids trying to remove an uninitialised character device
when the port device is removed.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Greg Kroah-Hartman <greg@kroah.com>
[lizf: Backported to 3.4:
 - adjust context
 - s/goto exit_with_autopm/goto exit]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/serial/bus.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 1b59665..358d2d6 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -52,6 +52,7 @@ static int usb_serial_device_probe(struct device *dev)
 {
 	struct usb_serial_driver *driver;
 	struct usb_serial_port *port;
+	struct device *tty_dev;
 	int retval = 0;
 	int minor;
 
@@ -76,7 +77,15 @@ static int usb_serial_device_probe(struct device *dev)
 	}
 
 	minor = port->number;
-	tty_register_device(usb_serial_tty_driver, minor, dev);
+	tty_dev = tty_register_device(usb_serial_tty_driver, minor, dev);
+	if (IS_ERR(tty_dev)) {
+		retval = PTR_ERR(tty_dev);
+		device_remove_file(dev, &dev_attr_port_number);
+		if (driver->port_remove)
+			driver->port_remove(port);
+		goto exit;
+	}
+
 	dev_info(&port->serial->dev->dev,
 		 "%s converter now attached to ttyUSB%d\n",
 		 driver->description, minor);
-- 
1.9.1

[PATCH 3.4 059/172] mac80211: Send EAPOL frames at lowest rate

[lizf]

From: Jouni Malinen <jouni@qca.qualcomm.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 9c1c98a3bb7b7593b60264b9a07e001e68b46697 upstream.

The current minstrel_ht rate control behavior is somewhat optimistic in
trying to find optimum TX rate. While this is usually fine for normal
Data frames, there are cases where a more conservative set of retry
parameters would be beneficial to make the connection more robust.

EAPOL frames are critical to the authentication and especially the
EAPOL-Key message 4/4 (the last message in the 4-way handshake) is
important to get through to the AP. If that message is lost, the only
recovery mechanism in many cases is to reassociate with the AP and start
from scratch. This can often be avoided by trying to send the frame with
more conservative rate and/or with more link layer retries.

In most cases, minstrel_ht is currently using the initial EAPOL-Key
frames for probing higher rates and this results in only five link layer
transmission attempts (one at high(ish) MCS and four at MCS0). While
this works with most APs, it looks like there are some deployed APs that
may have issues with the EAPOL frames using HT MCS immediately after
association. Similarly, there may be issues in cases where the signal
strength or radio environment is not good enough to be able to get
frames through even at couple of MCS 0 tries.

The best approach for this would likely to be to reduce the TX rate for
the last rate (3rd rate parameter in the set) to a low basic rate (say,
6 Mbps on 5 GHz and 2 or 5.5 Mbps on 2.4 GHz), but doing that cleanly
requires some more effort. For now, we can start with a simple one-liner
that forces the minimum rate to be used for EAPOL frames similarly how
the TX rate is selected for the IEEE 802.11 Management frames. This does
result in a small extra latency added to the cases where the AP would be
able to receive the higher rate, but taken into account how small number
of EAPOL frames are used, this is likely to be insignificant. A future
optimization in the minstrel_ht design can also allow this patch to be
reverted to get back to the more optimized initial TX rate.

It should also be noted that many drivers that do not use minstrel as
the rate control algorithm are already doing similar workarounds by
forcing the lowest TX rate to be used for EAPOL frames.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[lizf: Backported to 3.4: adjust the if statement]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/mac80211/tx.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index b7fc3dd..f4f24be 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -544,9 +544,11 @@ ieee80211_tx_h_check_control_port_protocol(struct ieee80211_tx_data *tx)
 {
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
 
-	if (unlikely(tx->sdata->control_port_protocol == tx->skb->protocol &&
-		     tx->sdata->control_port_no_encrypt))
-		info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+	if (unlikely(tx->sdata->control_port_protocol == tx->skb->protocol)) {
+		if (tx->sdata->control_port_no_encrypt)
+			info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+		info->flags |= IEEE80211_TX_CTL_USE_MINRATE;
+	}
 
 	return TX_CONTINUE;
 }
-- 
1.9.1

[PATCH 3.4 060/172] USB: serial: cp210x: Adding Seletek device id's

[lizf]

From: Michiel vd Garde <mgparser@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 675af70856d7cc026be8b6ea7a8b9db10b8b38a1 upstream.

These device ID's are not associated with the cp210x module currently,
but should be. This patch allows the devices to operate upon connecting
them to the usb bus as intended.

Signed-off-by: Michiel van de Garde <mgparser@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/serial/cp210x.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index a455343..5c289fc 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -153,6 +153,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
 	{ USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
 	{ USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
+	{ USB_DEVICE(0x16C0, 0x09B0) }, /* Lunatico Seletek */
+	{ USB_DEVICE(0x16C0, 0x09B1) }, /* Lunatico Seletek */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
 	{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
-- 
1.9.1

[PATCH 3.4 061/172] NFSv4: Don't call put_rpccred() under the rcu_read_lock()

[lizf]

From: Trond Myklebust <trond.myklebust@primarydata.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 7c0af9ffb7bb4e5355470fa60b3eb711ddf226fa upstream.

put_rpccred() can sleep.

Fixes: 8f649c3762547 ("NFSv4: Fix the locking in nfs_inode_reclaim_delegation()")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/nfs/delegation.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index 16d16e5..62261de 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -148,8 +148,8 @@ void nfs_inode_reclaim_delegation(struct inode *inode, struct rpc_cred *cred,
 				  &delegation->flags);
 			NFS_I(inode)->delegation_state = delegation->type;
 			spin_unlock(&delegation->lock);
-			put_rpccred(oldcred);
 			rcu_read_unlock();
+			put_rpccred(oldcred);
 		} else {
 			/* We appear to have raced with a delegation return. */
 			spin_unlock(&delegation->lock);
-- 
1.9.1

[PATCH 3.4 062/172] usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boards

[lizf]

From: Max Mansfield <max.m.mansfield@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit c7d373c3f0da2b2b78c4b1ce5ae41485b3ef848c upstream.

This patch integrates Cyber Cortex AV boards with the existing
ftdi_jtag_quirk in order to use serial port 0 with JTAG which is
required by the manufacturers' software.

Steps: 2

[ftdi_sio_ids.h]
1. Defined the device PID

[ftdi_sio.c]
2. Added a macro declaration to the ids array, in order to enable the
jtag quirk for the device.

Signed-off-by: Max Mansfield <max.m.mansfield@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/serial/ftdi_sio.c     | 2 ++
 drivers/usb/serial/ftdi_sio_ids.h | 3 +++
 2 files changed, 5 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8441cec..13420bc 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -823,6 +823,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
+	{ USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID),
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index eba7360..261875e 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -38,6 +38,9 @@
 
 #define FTDI_LUMEL_PD12_PID	0x6002
 
+/* Cyber Cortex AV by Fabulous Silicon (http://fabuloussilicon.com) */
+#define CYBER_CORTEX_AV_PID	0x8698
+
 /*
  * Marvell OpenRD Base, Client
  * http://www.open-rd.org
-- 
1.9.1

[PATCH 3.4 063/172] eCryptfs: don't pass fs-specific ioctl commands through

[lizf]

From: Tyler Hicks <tyhicks@canonical.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 6d65261a09adaa374c05de807f73a144d783669e upstream.

eCryptfs can't be aware of what to expect when after passing an
arbitrary ioctl command through to the lower filesystem. The ioctl
command may trigger an action in the lower filesystem that is
incompatible with eCryptfs.

One specific example is when one attempts to use the Btrfs clone
ioctl command when the source file is in the Btrfs filesystem that
eCryptfs is mounted on top of and the destination fd is from a new file
created in the eCryptfs mount. The ioctl syscall incorrectly returns
success because the command is passed down to Btrfs which thinks that it
was able to do the clone operation. However, the result is an empty
eCryptfs file.

This patch allows the trim, {g,s}etflags, and {g,s}etversion ioctl
commands through and then copies up the inode metadata from the lower
inode to the eCryptfs inode to catch any changes made to the lower
inode's metadata. Those five ioctl commands are mostly common across all
filesystems but the whitelist may need to be further pruned in the
future.

https://bugzilla.kernel.org/show_bug.cgi?id=93691
https://launchpad.net/bugs/1305335

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Rocko <rockorequin@hotmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
[lizf: Backported to 3.4:
 - adjust context
 - there's no file_inode(), so open-code it]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/ecryptfs/file.c | 34 ++++++++++++++++++++++++++++++----
 1 file changed, 30 insertions(+), 4 deletions(-)

diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index f04aa33..e33e0e4 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -306,9 +306,22 @@ ecryptfs_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 	if (ecryptfs_file_to_private(file))
 		lower_file = ecryptfs_file_to_lower(file);
-	if (lower_file && lower_file->f_op && lower_file->f_op->unlocked_ioctl)
+	if (!(lower_file && lower_file->f_op && lower_file->f_op->unlocked_ioctl))
+		return rc;
+
+	switch (cmd) {
+	case FITRIM:
+	case FS_IOC_GETFLAGS:
+	case FS_IOC_SETFLAGS:
+	case FS_IOC_GETVERSION:
+	case FS_IOC_SETVERSION:
 		rc = lower_file->f_op->unlocked_ioctl(lower_file, cmd, arg);
-	return rc;
+		fsstack_copy_attr_all(file->f_path.dentry->d_inode,
+				      lower_file->f_path.dentry->d_inode);
+		return rc;
+	default:
+		return rc;
+	}
 }
 
 #ifdef CONFIG_COMPAT
@@ -320,9 +333,22 @@ ecryptfs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 	if (ecryptfs_file_to_private(file))
 		lower_file = ecryptfs_file_to_lower(file);
-	if (lower_file && lower_file->f_op && lower_file->f_op->compat_ioctl)
+	if (!(lower_file && lower_file->f_op && lower_file->f_op->compat_ioctl))
+		return rc;
+
+	switch (cmd) {
+	case FITRIM:
+	case FS_IOC32_GETFLAGS:
+	case FS_IOC32_SETFLAGS:
+	case FS_IOC32_GETVERSION:
+	case FS_IOC32_SETVERSION:
 		rc = lower_file->f_op->compat_ioctl(lower_file, cmd, arg);
-	return rc;
+		fsstack_copy_attr_all(file->f_path.dentry->d_inode,
+				      lower_file->f_path.dentry->d_inode);
+		return rc;
+	default:
+		return rc;
+	}
 }
 #endif
 
-- 
1.9.1

[PATCH 3.4 064/172] drm/radeon: do a posting read in r100_set_irq

[lizf]

From: Alex Deucher <alexander.deucher@amd.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit f957063fee6392bb9365370db6db74dc0b2dce0a upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/gpu/drm/radeon/r100.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 40ed0e5..8ec5b85 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -726,6 +726,10 @@ int r100_irq_set(struct radeon_device *rdev)
 		tmp |= RADEON_FP2_DETECT_MASK;
 	}
 	WREG32(RADEON_GEN_INT_CNTL, tmp);
+
+	/* read back to post the write */
+	RREG32(RADEON_GEN_INT_CNTL);
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH 3.4 065/172] drm/radeon: do a posting read in rs600_set_irq

[lizf]

From: Alex Deucher <alexander.deucher@amd.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 54acf107e4e66d1f4a697e08a7f60dba9fcf07c3 upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/gpu/drm/radeon/rs600.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 739eb0d..07b6dbf 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -585,6 +585,10 @@ int rs600_irq_set(struct radeon_device *rdev)
 	WREG32(R_006540_DxMODE_INT_MASK, mode_int);
 	WREG32(R_007D08_DC_HOT_PLUG_DETECT1_INT_CONTROL, hpd1);
 	WREG32(R_007D18_DC_HOT_PLUG_DETECT2_INT_CONTROL, hpd2);
+
+	/* posting read */
+	RREG32(R_000040_GEN_INT_CNTL);
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH 3.4 066/172] drm/radeon: do a posting read in r600_set_irq

[lizf]

From: Alex Deucher <alexander.deucher@amd.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 9d1393f23d5656cdd5f368efd60694d4aeed81d3 upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/gpu/drm/radeon/r600.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 1555cd6..9c7062d 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -3184,6 +3184,9 @@ int r600_irq_set(struct radeon_device *rdev)
 		WREG32(DC_HOT_PLUG_DETECT3_INT_CONTROL, hpd3);
 	}
 
+	/* posting read */
+	RREG32(R_000E50_SRBM_STATUS);
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH 3.4 067/172] drm/radeon: do a posting read in evergreen_set_irq

[lizf]

From: Alex Deucher <alexander.deucher@amd.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit c320bb5f6dc0cb88a811cbaf839303e0a3916a92 upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/gpu/drm/radeon/evergreen.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 01434ef..c5fe79e 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -3474,6 +3474,9 @@ int evergreen_init(struct radeon_device *rdev)
 		}
 	}
 
+	/* posting read */
+	RREG32(SRBM_STATUS);
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH 3.4 068/172] drm/radeon: do a posting read in si_set_irq

[lizf]

From: Alex Deucher <alexander.deucher@amd.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 0586915ec10d0ae60de5cd3381ad25a704760402 upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/gpu/drm/radeon/si.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index e710073..068b21f 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -4126,6 +4126,9 @@ int si_init(struct radeon_device *rdev)
 		return -EINVAL;
 	}
 
+	/* posting read */
+	RREG32(SRBM_STATUS);
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH 3.4 069/172] drm/radeon: fix DRM_IOCTL_RADEON_CS oops

[lizf]

From: Tommi Rantala <tt.rantala@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit a28b2a47edcd0cb7c051b445f71a426000394606 upstream.

Passing zeroed drm_radeon_cs struct to DRM_IOCTL_RADEON_CS produces the
following oops.

Fix by always calling INIT_LIST_HEAD() to avoid the crash in list_sort().

----------------------------------

 #include <stdint.h>
 #include <fcntl.h>
 #include <unistd.h>
 #include <sys/ioctl.h>
 #include <drm/radeon_drm.h>

 static const struct drm_radeon_cs cs;

 int main(int argc, char **argv)
 {
         return ioctl(open(argv[1], O_RDWR), DRM_IOCTL_RADEON_CS, &cs);
 }

----------------------------------

[ttrantal@test2 ~]$ ./main /dev/dri/card0
[   46.904650] BUG: unable to handle kernel NULL pointer dereference at           (null)
[   46.905022] IP: [<ffffffff814d6df2>] list_sort+0x42/0x240
[   46.905022] PGD 68f29067 PUD 688b5067 PMD 0
[   46.905022] Oops: 0002 [#1] SMP
[   46.905022] CPU: 0 PID: 2413 Comm: main Not tainted 4.0.0-rc1+ #58
[   46.905022] Hardware name: Hewlett-Packard HP Compaq dc5750 Small Form Factor/0A64h, BIOS 786E3 v02.10 01/25/2007
[   46.905022] task: ffff880058e2bcc0 ti: ffff880058e64000 task.ti: ffff880058e64000
[   46.905022] RIP: 0010:[<ffffffff814d6df2>]  [<ffffffff814d6df2>] list_sort+0x42/0x240
[   46.905022] RSP: 0018:ffff880058e67998  EFLAGS: 00010246
[   46.905022] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   46.905022] RDX: ffffffff81644410 RSI: ffff880058e67b40 RDI: ffff880058e67a58
[   46.905022] RBP: ffff880058e67a88 R08: 0000000000000000 R09: 0000000000000000
[   46.905022] R10: ffff880058e2bcc0 R11: ffffffff828e6ca0 R12: ffffffff81644410
[   46.905022] R13: ffff8800694b8018 R14: 0000000000000000 R15: ffff880058e679b0
[   46.905022] FS:  00007fdc65a65700(0000) GS:ffff88006d600000(0000) knlGS:0000000000000000
[   46.905022] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   46.905022] CR2: 0000000000000000 CR3: 0000000058dd9000 CR4: 00000000000006f0
[   46.905022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   46.905022] DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
[   46.905022] Stack:
[   46.905022]  ffff880058e67b40 ffff880058e2bcc0 ffff880058e67a78 0000000000000000
[   46.905022]  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[   46.905022]  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[   46.905022] Call Trace:
[   46.905022]  [<ffffffff81644a65>] radeon_cs_parser_fini+0x195/0x220
[   46.905022]  [<ffffffff81645069>] radeon_cs_ioctl+0xa9/0x960
[   46.905022]  [<ffffffff815e1f7c>] drm_ioctl+0x19c/0x640
[   46.905022]  [<ffffffff810f8fdd>] ? trace_hardirqs_on_caller+0xfd/0x1c0
[   46.905022]  [<ffffffff810f90ad>] ? trace_hardirqs_on+0xd/0x10
[   46.905022]  [<ffffffff8160c066>] radeon_drm_ioctl+0x46/0x80
[   46.905022]  [<ffffffff81211868>] do_vfs_ioctl+0x318/0x570
[   46.905022]  [<ffffffff81462ef6>] ? selinux_file_ioctl+0x56/0x110
[   46.905022]  [<ffffffff81211b41>] SyS_ioctl+0x81/0xa0
[   46.905022]  [<ffffffff81dc6312>] system_call_fastpath+0x12/0x17
[   46.905022] Code: 48 89 b5 10 ff ff ff 0f 84 03 01 00 00 4c 8d bd 28 ff ff
ff 31 c0 48 89 fb b9 15 00 00 00 49 89 d4 4c 89 ff f3 48 ab 48 8b 46 08 <48> c7
00 00 00 00 00 48 8b 0e 48 85 c9 0f 84 7d 00 00 00 c7 85
[   46.905022] RIP  [<ffffffff814d6df2>] list_sort+0x42/0x240
[   46.905022]  RSP <ffff880058e67998>
[   46.905022] CR2: 0000000000000000
[   47.149253] ---[ end trace 09576b4e8b2c20b8 ]---

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/gpu/drm/radeon/radeon_cs.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index cf723c4..f3ee360 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -167,11 +167,13 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data)
 	u32 ring = RADEON_CS_RING_GFX;
 	s32 priority = 0;
 
+	INIT_LIST_HEAD(&p->validated);
+
 	if (!cs->num_chunks) {
 		return 0;
 	}
+
 	/* get chunks */
-	INIT_LIST_HEAD(&p->validated);
 	p->idx = 0;
 	p->chunk_ib_idx = -1;
 	p->chunk_relocs_idx = -1;
-- 
1.9.1

[PATCH 3.4 070/172] ACPI / video: Load the module even if ACPI is disabled

[lizf]

From: Chris Wilson <chris@chris-wilson.co.uk>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 6e17cb12881ba8d5e456b89f072dc6b70048af36 upstream.

i915.ko depends upon the acpi/video.ko module and so refuses to load if
ACPI is disabled at runtime if for example the BIOS is broken beyond
repair. acpi/video provides an optional service for i915.ko and so we
should just allow the modules to load, but do no nothing in order to let
the machines boot correctly.

Reported-by: Bill Augur <bill-auger@programmer.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Aaron Lu <aaron.lu@intel.com>
[ rjw: Fixed up the new comment in acpi_video_init() ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/acpi/video.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 8c5ad89..89cff37 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1872,6 +1872,17 @@ EXPORT_SYMBOL(acpi_video_unregister);
 
 static int __init acpi_video_init(void)
 {
+	/*
+	 * Let the module load even if ACPI is disabled (e.g. due to
+	 * a broken BIOS) so that i915.ko can still be loaded on such
+	 * old systems without an AcpiOpRegion.
+	 *
+	 * acpi_video_register() will report -ENODEV later as well due
+	 * to acpi_disabled when i915.ko tries to register itself afterwards.
+	 */
+	if (acpi_disabled)
+		return 0;
+
 	dmi_check_system(video_dmi_table);
 
 	if (intel_opregion_present())
-- 
1.9.1

[PATCH 3.4 071/172] ASoC: omap-pcm: Correct dma mask

[lizf]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit d51199a83a2cf82a291d19ee852c44caa511427d upstream.

DMA_BIT_MASK of 64 is not valid dma address mask for OMAPs, it should be
set to 32.
The 64 was introduced by commit (in 2009):
a152ff24b978 ASoC: OMAP: Make DMA 64 aligned

But the dma_mask and coherent_dma_mask can not be used to specify alignment.

Fixes: a152ff24b978 (ASoC: OMAP: Make DMA 64 aligned)
Reported-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
[lizf: Backported to 3.4: there's no dma_coerce_mask_and_coherent()]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/soc/omap/omap-pcm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 5a649da..96bce55a 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -333,7 +333,7 @@ static struct snd_pcm_ops omap_pcm_ops = {
 	.mmap		= omap_pcm_mmap,
 };
 
-static u64 omap_pcm_dmamask = DMA_BIT_MASK(64);
+static u64 omap_pcm_dmamask = DMA_BIT_MASK(32);
 
 static int omap_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
 	int stream)
@@ -384,7 +384,7 @@ static int omap_pcm_new(struct snd_soc_pcm_runtime *rtd)
 	if (!card->dev->dma_mask)
 		card->dev->dma_mask = &omap_pcm_dmamask;
 	if (!card->dev->coherent_dma_mask)
-		card->dev->coherent_dma_mask = DMA_BIT_MASK(64);
+		card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
 
 	if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
 		ret = omap_pcm_preallocate_dma_buffer(pcm,
-- 
1.9.1

[PATCH 3.4 072/172] x86/asm/entry/64: Remove a bogus 'ret_from_fork' optimization

[lizf]

From: Andy Lutomirski <luto@amacapital.net>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 956421fbb74c3a6261903f3836c0740187cf038b upstream.

'ret_from_fork' checks TIF_IA32 to determine whether 'pt_regs' and
the related state make sense for 'ret_from_sys_call'.  This is
entirely the wrong check.  TS_COMPAT would make a little more
sense, but there's really no point in keeping this optimization
at all.

This fixes a return to the wrong user CS if we came from int
0x80 in a 64-bit task.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/4710be56d76ef994ddf59087aad98c000fbab9a4.1424989793.git.luto@amacapital.net
[ Backported from tip:x86/asm. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/x86/kernel/entry_64.S | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 45f9c70..8b49131 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -414,11 +414,14 @@ ENTRY(ret_from_fork)
 	testl $3, CS-ARGOFFSET(%rsp)		# from kernel_thread?
 	jz   retint_restore_args
 
-	testl $_TIF_IA32, TI_flags(%rcx)	# 32-bit compat task needs IRET
-	jnz  int_ret_from_sys_call
-
-	RESTORE_TOP_OF_STACK %rdi, -ARGOFFSET
-	jmp ret_from_sys_call			# go to the SYSRET fastpath
+	/*
+	 * By the time we get here, we have no idea whether our pt_regs,
+	 * ti flags, and ti status came from the 64-bit SYSCALL fast path,
+	 * the slow path, or one of the ia32entry paths.
+	 * Use int_ret_from_sys_call to return, since it can safely handle
+	 * all of the above.
+	 */
+	jmp  int_ret_from_sys_call
 
 	CFI_ENDPROC
 END(ret_from_fork)
-- 
1.9.1

[PATCH 3.4 073/172] xhci: fix reporting of 0-sized URBs in control endpoint

[lizf]

From: Aleksander Morgado <aleksander@aleksander.es>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 45ba2154d12fc43b70312198ec47085f10be801a upstream.

When a control transfer has a short data stage, the xHCI controller generates
two transfer events: a COMP_SHORT_TX event that specifies the untransferred
amount, and a COMP_SUCCESS event. But when the data stage is not short, only the
COMP_SUCCESS event occurs. Therefore, xhci-hcd must set urb->actual_length to
urb->transfer_buffer_length while processing the COMP_SUCCESS event, unless
urb->actual_length was set already by a previous COMP_SHORT_TX event.

The driver checks this by seeing whether urb->actual_length == 0, but this alone
is the wrong test, as it is entirely possible for a short transfer to have an
urb->actual_length = 0.

This patch changes the xhci driver to rely on a new td->urb_length_set flag,
which is set to true when a COMP_SHORT_TX event is received and the URB length
updated at that stage.

This fixes a bug which affected the HSO plugin, which relies on URBs with
urb->actual_length == 0 to halt re-submitting the RX URB in the control
endpoint.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/host/xhci-ring.c | 10 ++++++++--
 drivers/usb/host/xhci.h      |  3 +++
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 950edeb..e47a4e1 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2049,7 +2049,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	if (event_trb != ep_ring->dequeue) {
 		/* The event was for the status stage */
 		if (event_trb == td->last_trb) {
-			if (td->urb->actual_length != 0) {
+			if (td->urb_length_set) {
 				/* Don't overwrite a previously set error code
 				 */
 				if ((*status == -EINPROGRESS || *status == 0) &&
@@ -2063,7 +2063,13 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 					td->urb->transfer_buffer_length;
 			}
 		} else {
-		/* Maybe the event was for the data stage? */
+			/*
+			 * Maybe the event was for the data stage? If so, update
+			 * already the actual_length of the URB and flag it as
+			 * set, so that it is not overwritten in the event for
+			 * the last TRB.
+			 */
+			td->urb_length_set = true;
 			td->urb->actual_length =
 				td->urb->transfer_buffer_length -
 				EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ed20062..5d294ac 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1,3 +1,4 @@
+
 /*
  * xHCI host controller driver
  *
@@ -1255,6 +1256,8 @@ struct xhci_td {
 	struct xhci_segment	*start_seg;
 	union xhci_trb		*first_trb;
 	union xhci_trb		*last_trb;
+	/* actual_length of the URB has already been set */
+	bool			urb_length_set;
 };
 
 /* xHCI command default timeout value */
-- 
1.9.1

[PATCH 3.4 074/172] xhci: Workaround for PME stuck issues in Intel xhci

[lizf]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit b8cb91e058cd0c0f02059c1207293c5b31d350fa upstream.

The xhci in Intel Sunrisepoint and Cherryview platforms need a driver
workaround for a Stuck PME that might either block PME events in suspend,
or create spurious PME events preventing runtime suspend.

Workaround is to clear a internal PME flag, BIT(28) in a vendor specific
PMCTRL register at offset 0x80a4, in both suspend resume callbacks

Without this, xhci connected usb devices might never be able to wake up the
system from suspend, or prevent device from going to suspend (xhci d3)

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/host/xhci-pci.c | 30 ++++++++++++++++++++++++++++++
 drivers/usb/host/xhci.h     |  1 +
 2 files changed, 31 insertions(+)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c9e39d4..037185d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -36,6 +36,9 @@
 
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI	0x8c31
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
+#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI		0x22b5
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI		0xa12f
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI	0x9d2f
 
 static const char hcd_name[] = "xhci_hcd";
 
@@ -118,6 +121,12 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 		xhci->quirks |= XHCI_AVOID_BEI;
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) {
+		xhci->quirks |= XHCI_PME_STUCK_QUIRK;
+	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
@@ -131,6 +140,21 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 }
 
+/*
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct xhci_hcd *xhci)
+{
+	u32 val;
+	void __iomem *reg;
+
+	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+	val = readl(reg);
+	writel(val | BIT(28), reg);
+	readl(reg);
+}
+
 /* called during probe() after chip reset completes */
 static int xhci_pci_setup(struct usb_hcd *hcd)
 {
@@ -238,6 +262,9 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
 		return -EINVAL;
 
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(xhci);
+
 	retval = xhci_suspend(xhci, do_wakeup);
 
 	return retval;
@@ -268,6 +295,9 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	if (usb_is_intel_switchable_xhci(pdev))
 		usb_enable_xhci_ports(pdev);
 
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(xhci);
+
 	retval = xhci_resume(xhci, hibernated);
 	return retval;
 }
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 5d294ac..80b3d85 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1515,6 +1515,7 @@ struct xhci_hcd {
 #define XHCI_PLAT		(1 << 16)
 #define XHCI_SLOW_SUSPEND	(1 << 17)
 #define XHCI_SPURIOUS_WAKEUP	(1 << 18)
+#define XHCI_PME_STUCK_QUIRK	(1 << 20)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */
-- 
1.9.1

[PATCH 3.4 075/172] Change email address for 8250_pci

[lizf]

From: Russell King <rmk+kernel@arm.linux.org.uk>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit f2e0ea861117bda073d1d7ffbd3120c07c0d5d34 upstream.

I'm still receiving reports to my email address, so let's point this
at the linux-serial mailing list instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/tty/serial/8250/8250_pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 6f8f985..e4aada5 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -67,7 +67,7 @@ static void moan_device(const char *str, struct pci_dev *dev)
 	       "Please send the output of lspci -vv, this\n"
 	       "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
 	       "manufacturer and name of serial board or\n"
-	       "modem board to rmk+serial@arm.linux.org.uk.\n",
+	       "modem board to <linux-serial@vger.kernel.org>.\n",
 	       pci_name(dev), str, dev->vendor, dev->device,
 	       dev->subsystem_vendor, dev->subsystem_device);
 }
-- 
1.9.1

[PATCH 3.4 076/172] tty: fix up atime/mtime mess, take four

[lizf]

From: Jiri Slaby <jslaby@suse.cz>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit f0bf0bd07943bfde8f5ac39a32664810a379c7d3 upstream.

This problem was taken care of three times already in
* b0de59b5733d18b0d1974a060860a8b5c1b36a2e (TTY: do not update
  atime/mtime on read/write),
* 37b7f3c76595e23257f61bd80b223de8658617ee (TTY: fix atime/mtime
  regression), and
* b0b885657b6c8ef63a46bc9299b2a7715d19acde (tty: fix up atime/mtime
  mess, take three)

But it still misses one point. As John Paul correctly points out, we
do not care about setting date. If somebody ever changes wall
time backwards (by mistake for example), tty timestamps are never
updated until the original wall time passes.

So check the absolute difference of times and if it large than "8
seconds or so", always update the time. That means we will update
immediatelly when changing time. Ergo, CAP_SYS_TIME can foul the
check, but it was always that way.

Thanks John for serving me this so nicely debugged.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: John Paul Perry <john_paul.perry@alcatel-lucent.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/tty/tty_io.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index a07eb4c..5f0b4a4 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -941,8 +941,8 @@ EXPORT_SYMBOL(start_tty);
 /* We limit tty time update visibility to every 8 seconds or so. */
 static void tty_update_time(struct timespec *time)
 {
-	unsigned long sec = get_seconds() & ~7;
-	if ((long)(sec - time->tv_sec) > 0)
+	unsigned long sec = get_seconds();
+	if (abs(sec - time->tv_sec) & ~7)
 		time->tv_sec = sec;
 }
 
-- 
1.9.1

[PATCH 3.4 077/172] console: Fix console name size mismatch

[lizf]

From: Peter Hurley <peter@hurleysoftware.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 30a22c215a0007603ffc08021f2e8b64018517dd upstream.

commit 6ae9200f2cab7 ("enlarge console.name") increased the storage
for the console name to 16 bytes, but not the corresponding
struct console_cmdline::name storage. Console names longer than
8 bytes cause read beyond end-of-string and failure to match
console; I'm not sure if there are other unexpected consequences.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[lizf: Backported to 3.4:
 - adjust filename
 - s/c->name/console_cmdline[i].name/]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 kernel/printk.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/printk.c b/kernel/printk.c
index 544c021..cb72d9c 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -126,7 +126,7 @@ static struct console *exclusive_console;
  */
 struct console_cmdline
 {
-	char	name[8];			/* Name of the driver	    */
+	char	name[16];			/* Name of the driver	    */
 	int	index;				/* Minor dev. to use	    */
 	char	*options;			/* Options for the driver   */
 #ifdef CONFIG_A11Y_BRAILLE_CONSOLE
@@ -1498,6 +1498,7 @@ void register_console(struct console *newcon)
 	 */
 	for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0];
 			i++) {
+		BUILD_BUG_ON(sizeof(console_cmdline[i].name) != sizeof(newcon->name));
 		if (strcmp(console_cmdline[i].name, newcon->name) != 0)
 			continue;
 		if (newcon->index >= 0 &&
-- 
1.9.1

[PATCH 3.4 078/172] net: irda: fix wait_until_sent poll timeout

[lizf]

From: Johan Hovold <johan@kernel.org>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 2c3fbe3cf28fbd7001545a92a83b4f8acfd9fa36 upstream.

In case an infinite timeout (0) is requested, the irda wait_until_sent
implementation would use a zero poll timeout rather than the default
200ms.

Note that wait_until_sent is currently never called with a 0-timeout
argument due to a bug in tty_wait_until_sent.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/irda/ircomm/ircomm_tty.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index 6b9d5a0..20fec0d 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -843,7 +843,9 @@ static void ircomm_tty_wait_until_sent(struct tty_struct *tty, int timeout)
 	orig_jiffies = jiffies;
 
 	/* Set poll time to 200 ms */
-	poll_time = IRDA_MIN(timeout, msecs_to_jiffies(200));
+	poll_time = msecs_to_jiffies(200);
+	if (timeout)
+		poll_time = min_t(unsigned long, timeout, poll_time);
 
 	spin_lock_irqsave(&self->spinlock, flags);
 	while (self->tx_skb && self->tx_skb->len) {
-- 
1.9.1

[PATCH 3.4 079/172] TTY: fix tty_wait_until_sent on 64-bit machines

[lizf]

From: Johan Hovold <johan@kernel.org>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 79fbf4a550ed6a22e1ae1516113e6c7fa5d56a53 upstream.

Fix overflow bug in tty_wait_until_sent on 64-bit machines, where an
infinite timeout (0) would be passed to the underlying tty-driver's
wait_until_sent-operation as a negative timeout (-1), causing it to
return immediately.

This manifests itself for example as tcdrain() returning immediately,
drivers not honouring the drain flags when setting terminal attributes,
or even dropped data on close as a requested infinite closing-wait
timeout would be ignored.

The first symptom  was reported by Asier LLANO who noted that tcdrain()
returned prematurely when using the ftdi_sio usb-serial driver.

Fix this by passing 0 rather than MAX_SCHEDULE_TIMEOUT (LONG_MAX) to the
underlying tty driver.

Note that the serial-core wait_until_sent-implementation is not affected
by this bug due to a lucky chance (comparison to an unsigned maximum
timeout), and neither is the cyclades one that had an explicit check for
negative timeouts, but all other tty drivers appear to be affected.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: ZIV-Asier Llano Palacios <asier.llano@cgglobal.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/tty/tty_ioctl.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index f8d03da..9ab33c7 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -153,11 +153,17 @@ void tty_wait_until_sent(struct tty_struct *tty, long timeout)
 #endif
 	if (!timeout)
 		timeout = MAX_SCHEDULE_TIMEOUT;
+
 	if (wait_event_interruptible_timeout(tty->write_wait,
-			!tty_chars_in_buffer(tty), timeout) >= 0) {
-		if (tty->ops->wait_until_sent)
-			tty->ops->wait_until_sent(tty, timeout);
+			!tty_chars_in_buffer(tty), timeout) < 0) {
+		return;
 	}
+
+	if (timeout == MAX_SCHEDULE_TIMEOUT)
+		timeout = 0;
+
+	if (tty->ops->wait_until_sent)
+		tty->ops->wait_until_sent(tty, timeout);
 }
 EXPORT_SYMBOL(tty_wait_until_sent);
 
-- 
1.9.1

[PATCH 3.4 080/172] sunrpc: fix braino in ->poll()

[lizf]

From: Al Viro <viro@ZenIV.linux.org.uk>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 1711fd9addf214823b993468567cab1f8254fc51 upstream.

POLL_OUT isn't what callers of ->poll() are expecting to see; it's
actually __SI_POLL | 2 and it's a siginfo code, not a poll bitmap
bit...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/sunrpc/cache.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index 76cb304..af4dd9e 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -911,7 +911,7 @@ static unsigned int cache_poll(struct file *filp, poll_table *wait,
 	poll_wait(filp, &queue_wait, wait);
 
 	/* alway allow write */
-	mask = POLL_OUT | POLLWRNORM;
+	mask = POLLOUT | POLLWRNORM;
 
 	if (!rp)
 		return mask;
-- 
1.9.1

[PATCH 3.4 081/172] gadgetfs: use-after-free in ->aio_read()

[lizf]

From: Al Viro <viro@zeniv.linux.org.uk>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit f01d35a15fa04162a58b95970fc01fa70ec9dacd upstream.

AIO_PREAD requests call ->aio_read() with iovec on caller's stack, so if
we are going to access it asynchronously, we'd better get ourselves
a copy - the one on kernel stack of aio_run_iocb() won't be there
anymore.  function/f_fs.c take care of doing that, legacy/inode.c
doesn't...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[lizf: Backproted to 3.4:
 - adjust context
 - need kfree() after calling get_ready_ep()]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/gadget/inode.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index d9eaaa3..093e907 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -570,6 +570,7 @@ static ssize_t ep_aio_read_retry(struct kiocb *iocb)
 			break;
 	}
 	kfree(priv->buf);
+	kfree(priv->iv);
 	kfree(priv);
 	return len;
 }
@@ -591,6 +592,7 @@ static void ep_aio_complete(struct usb_ep *ep, struct usb_request *req)
 	 */
 	if (priv->iv == NULL || unlikely(req->actual == 0)) {
 		kfree(req->buf);
+		kfree(priv->iv);
 		kfree(priv);
 		iocb->private = NULL;
 		/* aio_complete() reports bytes-transferred _and_ faults */
@@ -626,7 +628,7 @@ ep_aio_rwtail(
 	struct usb_request	*req;
 	ssize_t			value;
 
-	priv = kmalloc(sizeof *priv, GFP_KERNEL);
+	priv = kzalloc(sizeof *priv, GFP_KERNEL);
 	if (!priv) {
 		value = -ENOMEM;
 fail:
@@ -634,11 +636,19 @@ fail:
 		return value;
 	}
 	iocb->private = priv;
-	priv->iv = iv;
+	if (iv) {
+		priv->iv = kmemdup(iv, nr_segs * sizeof(struct iovec),
+				   GFP_KERNEL);
+		if (!priv->iv) {
+			kfree(priv);
+			goto fail;
+		}
+	}
 	priv->nr_segs = nr_segs;
 
 	value = get_ready_ep(iocb->ki_filp->f_flags, epdata);
 	if (unlikely(value < 0)) {
+		kfree(priv->iv);
 		kfree(priv);
 		goto fail;
 	}
@@ -672,6 +682,7 @@ fail:
 	mutex_unlock(&epdata->lock);
 
 	if (unlikely(value)) {
+		kfree(priv->iv);
 		kfree(priv);
 		put_ep(epdata);
 	} else
-- 
1.9.1

[PATCH 3.4 082/172] ipvs: add missing ip_vs_pe_put in sync code

[lizf]

From: Julian Anastasov <ja@ssi.bg>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 528c943f3bb919aef75ab2fff4f00176f09a4019 upstream.

ip_vs_conn_fill_param_sync() gets in param.pe a module
reference for persistence engine from __ip_vs_pe_getbyname()
but forgets to put it. Problem occurs in backup for
sync protocol v1 (2.6.39).

Also, pe_data usually comes in sync messages for
connection templates and ip_vs_conn_new() copies
the pointer only in this case. Make sure pe_data
is not leaked if it comes unexpectedly for normal
connections. Leak can happen only if bogus messages
are sent to backup server.

Fixes: fe5e7a1efb66 ("IPVS: Backup, Adding Version 1 receive capability")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/netfilter/ipvs/ip_vs_sync.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index 8a0d6d6..6a5555c 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -763,6 +763,8 @@ static void ip_vs_proc_conn(struct net *net, struct ip_vs_conn_param *param,
 			IP_VS_DBG(2, "BACKUP, add new conn. failed\n");
 			return;
 		}
+		if (!(flags & IP_VS_CONN_F_TEMPLATE))
+			kfree(param->pe_data);
 	} else if (!cp->dest) {
 		dest = ip_vs_try_bind_dest(cp);
 		if (dest)
@@ -1064,6 +1066,7 @@ static inline int ip_vs_proc_sync_conn(struct net *net, __u8 *p, __u8 *msg_end)
 				(opt_flags & IPVS_OPT_F_SEQ_DATA ? &opt : NULL)
 				);
 #endif
+	ip_vs_pe_put(param.pe);
 	return 0;
 	/* Error exit */
 out:
-- 
1.9.1

[PATCH 3.4 083/172] ARM: at91: pm: fix at91rm9200 standby

[lizf]

From: Alexandre Belloni <alexandre.belloni@free-electrons.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 84e871660bebfddb9a62ebd6f19d02536e782f0a upstream.

at91rm9200 standby and suspend to ram has been broken since
00482a4078f4. It is wrongly using AT91_BASE_SYS which is a physical address
and actually doesn't correspond to any register on at91rm9200.

Use the correct at91_ramc_base[0] instead.

Fixes: 00482a4078f4 (ARM: at91: implement the standby function for pm/cpuidle)

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/arm/mach-at91/pm.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 89f56f3..8c3f8e8 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -38,7 +38,7 @@ static inline void at91rm9200_standby(void)
 		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
 		"    str    %5, [%1, %2]"
 		:
-		: "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
+		: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
 		  "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
 		  "r" (lpr));
 }
-- 
1.9.1

[PATCH 3.4 084/172] bnx2x: Force fundamental reset for EEH recovery

[lizf]

From: Brian King <brking@linux.vnet.ibm.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit da293700568ed3d96fcf062ac15d7d7c41377f11 upstream.

EEH recovery for bnx2x based adapters is not reliable on all Power
systems using the default hot reset, which can result in an
unrecoverable EEH error. Forcing the use of fundamental reset
during EEH recovery fixes this.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index b8e7f3e..1e274e7 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -10934,6 +10934,10 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 	/* clean indirect addresses */
 	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
 			       PCICFG_VENDOR_ID_OFFSET);
+
+	/* Set PCIe reset type to fundamental for EEH recovery */
+	pdev->needs_freset = 1;
+
 	/*
 	 * Clean the following indirect addresses for all functions since it
 	 * is not used by the driver.
-- 
1.9.1

[PATCH 3.4 085/172] libsas: Fix Kernel Crash in smp_execute_task

[lizf]

From: James Bottomley <JBottomley@Parallels.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 6302ce4d80aa82b3fdb5c5cd68e7268037091b47 upstream.

This crash was reported:

[  366.947370] sd 3:0:1:0: [sdb] Spinning up disk....
[  368.804046] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  368.804072] IP: [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b
[  368.804098] PGD 0
[  368.804114] Oops: 0002 [#1] SMP
[  368.804143] CPU 1
[  368.804151] Modules linked in: sg netconsole s3g(PO) uinput joydev hid_multitouch usbhid hid snd_hda_codec_via cpufreq_userspace cpufreq_powersave cpufreq_stats uhci_hcd cpufreq_conservative snd_hda_intel snd_hda_codec snd_hwdep snd_pcm sdhci_pci snd_page_alloc sdhci snd_timer snd psmouse evdev serio_raw pcspkr soundcore xhci_hcd shpchp s3g_drm(O) mvsas mmc_core ahci libahci drm i2c_core acpi_cpufreq mperf video processor button thermal_sys dm_dmirror exfat_fs exfat_core dm_zcache dm_mod padlock_aes aes_generic padlock_sha iscsi_target_mod target_core_mod configfs sswipe libsas libata scsi_transport_sas picdev via_cputemp hwmon_vid fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sd_mod crc_t10dif usb_storage scsi_mod ehci_hcd usbcore usb_common
[  368.804749]
[  368.804764] Pid: 392, comm: kworker/u:3 Tainted: P        W  O 3.4.87-logicube-ng.22 #1 To be filled by O.E.M. To be filled by O.E.M./EPIA-M920
[  368.804802] RIP: 0010:[<ffffffff81358457>]  [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b
[  368.804827] RSP: 0018:ffff880117001cc0  EFLAGS: 00010246
[  368.804842] RAX: 0000000000000000 RBX: ffff8801185030d0 RCX: ffff88008edcb420
[  368.804857] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8801185030d4
[  368.804873] RBP: ffff8801181531c0 R08: 0000000000000020 R09: 00000000fffffffe
[  368.804885] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801185030d4
[  368.804899] R13: 0000000000000002 R14: ffff880117001fd8 R15: ffff8801185030d8
[  368.804916] FS:  0000000000000000(0000) GS:ffff88011fc80000(0000) knlGS:0000000000000000
[  368.804931] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  368.804946] CR2: 0000000000000000 CR3: 000000000160b000 CR4: 00000000000006e0
[  368.804962] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  368.804978] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  368.804995] Process kworker/u:3 (pid: 392, threadinfo ffff880117000000, task ffff8801181531c0)
[  368.805009] Stack:
[  368.805017]  ffff8801185030d8 0000000000000000 ffffffff8161ddf0 ffffffff81056f7c
[  368.805062]  000000000000b503 ffff8801185030d0 ffff880118503000 0000000000000000
[  368.805100]  ffff8801185030d0 ffff8801188b8000 ffff88008edcb420 ffffffff813583ac
[  368.805135] Call Trace:
[  368.805153]  [<ffffffff81056f7c>] ? up+0xb/0x33
[  368.805168]  [<ffffffff813583ac>] ? mutex_lock+0x16/0x25
[  368.805194]  [<ffffffffa018c414>] ? smp_execute_task+0x4e/0x222 [libsas]
[  368.805217]  [<ffffffffa018ce1c>] ? sas_find_bcast_dev+0x3c/0x15d [libsas]
[  368.805240]  [<ffffffffa018ce4f>] ? sas_find_bcast_dev+0x6f/0x15d [libsas]
[  368.805264]  [<ffffffffa018e989>] ? sas_ex_revalidate_domain+0x37/0x2ec [libsas]
[  368.805280]  [<ffffffff81355a2a>] ? printk+0x43/0x48
[  368.805296]  [<ffffffff81359a65>] ? _raw_spin_unlock_irqrestore+0xc/0xd
[  368.805318]  [<ffffffffa018b767>] ? sas_revalidate_domain+0x85/0xb6 [libsas]
[  368.805336]  [<ffffffff8104e5d9>] ? process_one_work+0x151/0x27c
[  368.805351]  [<ffffffff8104f6cd>] ? worker_thread+0xbb/0x152
[  368.805366]  [<ffffffff8104f612>] ? manage_workers.isra.29+0x163/0x163
[  368.805382]  [<ffffffff81052c4e>] ? kthread+0x79/0x81
[  368.805399]  [<ffffffff8135fea4>] ? kernel_thread_helper+0x4/0x10
[  368.805416]  [<ffffffff81052bd5>] ? kthread_flush_work_fn+0x9/0x9
[  368.805431]  [<ffffffff8135fea0>] ? gs_change+0x13/0x13
[  368.805442] Code: 83 7d 30 63 7e 04 f3 90 eb ab 4c 8d 63 04 4c 8d 7b 08 4c 89 e7 e8 fa 15 00 00 48 8b 43 10 4c 89 3c 24 48 89 63 10 48 89 44 24 08 <48> 89 20 83 c8 ff 48 89 6c 24 10 87 03 ff c8 74 35 4d 89 ee 41
[  368.805851] RIP  [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b
[  368.805877]  RSP <ffff880117001cc0>
[  368.805886] CR2: 0000000000000000
[  368.805899] ---[ end trace b720682065d8f4cc ]---

It's directly caused by 89d3cf6 [SCSI] libsas: add mutex for SMP task
execution, but shows a deeper cause: expander functions expect to be able to
cast to and treat domain devices as expanders.  The correct fix is to only do
expander discover when we know we've got an expander device to avoid wrongly
casting a non-expander device.

Reported-by: Praveen Murali <pmurali@logicube.com>
Tested-by: Praveen Murali <pmurali@logicube.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/scsi/libsas/sas_discover.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index 629a086..5fbacde 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -446,6 +446,7 @@ static void sas_revalidate_domain(struct work_struct *work)
 	struct sas_discovery_event *ev = to_sas_discovery_event(work);
 	struct asd_sas_port *port = ev->port;
 	struct sas_ha_struct *ha = port->ha;
+	struct domain_device *ddev = port->port_dev;
 
 	/* prevent revalidation from finding sata links in recovery */
 	mutex_lock(&ha->disco_mutex);
@@ -460,8 +461,9 @@ static void sas_revalidate_domain(struct work_struct *work)
 	SAS_DPRINTK("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
 		    task_pid_nr(current));
 
-	if (port->port_dev)
-		res = sas_ex_revalidate_domain(port->port_dev);
+	if (ddev && (ddev->dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
+		     ddev->dev_type == SAS_EDGE_EXPANDER_DEVICE))
+		res = sas_ex_revalidate_domain(ddev);
 
 	SAS_DPRINTK("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",
 		    port->id, task_pid_nr(current), res);
-- 
1.9.1

[PATCH 3.4 086/172] can: add missing initialisations in CAN related skbuffs

[lizf]

From: Oliver Hartkopp <socketcan@hartkopp.net>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 969439016d2cf61fef53a973d7e6d2061c3793b1 upstream.

When accessing CAN network interfaces with AF_PACKET sockets e.g. by dhclient
this can lead to a skb_under_panic due to missing skb initialisations.

Add the missing initialisations at the CAN skbuff creation times on driver
level (rx path) and in the network layer (tx path).

Reported-by: Austin Schuh <austin@peloton-tech.com>
Reported-by: Daniel Steer <daniel.steer@mclaren.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[lizf: Backported to 3.4:
 - adjust context
 - drop changes to alloc_canfd_skb(), as there's no such function]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/net/can/dev.c | 5 +++++
 net/can/af_can.c      | 3 +++
 2 files changed, 8 insertions(+)

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 88c39e4..81a00e4 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -475,6 +475,11 @@ struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf)
 	skb->protocol = htons(ETH_P_CAN);
 	skb->pkt_type = PACKET_BROADCAST;
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+	skb_reset_mac_header(skb);
+	skb_reset_network_header(skb);
+	skb_reset_transport_header(skb);
+
 	*cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
 	memset(*cf, 0, sizeof(struct can_frame));
 
diff --git a/net/can/af_can.c b/net/can/af_can.c
index 0ce2ad0..7d9dff222 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -244,6 +244,9 @@ int can_send(struct sk_buff *skb, int loop)
 	}
 
 	skb->protocol = htons(ETH_P_CAN);
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 	skb_reset_transport_header(skb);
 
-- 
1.9.1

[PATCH 3.4 087/172] ftrace: Fix en(dis)able graph caller when en(dis)abling record via sysctl

[lizf]

From: Pratyush Anand <panand@redhat.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 1619dc3f8f555ee1cdd3c75db3885d5715442b12 upstream.

When ftrace is enabled globally through the proc interface, we must check if
ftrace_graph_active is set. If it is set, then we should also pass the
FTRACE_START_FUNC_RET command to ftrace_run_update_code(). Similarly, when
ftrace is disabled globally through the proc interface, we must check if
ftrace_graph_active is set. If it is set, then we should also pass the
FTRACE_STOP_FUNC_RET command to ftrace_run_update_code().

Consider the following situation.

 # echo 0 > /proc/sys/kernel/ftrace_enabled

After this ftrace_enabled = 0.

 # echo function_graph > /sys/kernel/debug/tracing/current_tracer

Since ftrace_enabled = 0, ftrace_enable_ftrace_graph_caller() is never
called.

 # echo 1 > /proc/sys/kernel/ftrace_enabled

Now ftrace_enabled will be set to true, but still
ftrace_enable_ftrace_graph_caller() will not be called, which is not
desired.

Further if we execute the following after this:
  # echo nop > /sys/kernel/debug/tracing/current_tracer

Now since ftrace_enabled is set it will call
ftrace_disable_ftrace_graph_caller(), which causes a kernel warning on
the ARM platform.

On the ARM platform, when ftrace_enable_ftrace_graph_caller() is called,
it checks whether the old instruction is a nop or not. If it's not a nop,
then it returns an error. If it is a nop then it replaces instruction at
that address with a branch to ftrace_graph_caller.
ftrace_disable_ftrace_graph_caller() behaves just the opposite. Therefore,
if generic ftrace code ever calls either ftrace_enable_ftrace_graph_caller()
or ftrace_disable_ftrace_graph_caller() consecutively two times in a row,
then it will return an error, which will cause the generic ftrace code to
raise a warning.

Note, x86 does not have an issue with this because the architecture
specific code for ftrace_enable_ftrace_graph_caller() and
ftrace_disable_ftrace_graph_caller() does not check the previous state,
and calling either of these functions twice in a row has no ill effect.

Link: http://lkml.kernel.org/r/e4fbe64cdac0dd0e86a3bf914b0f83c0b419f146.1425666454.git.panand@redhat.com

Signed-off-by: Pratyush Anand <panand@redhat.com>
[
  removed extra if (ftrace_start_up) and defined ftrace_graph_active as 0
  if CONFIG_FUNCTION_GRAPH_TRACER is not set.
]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 kernel/trace/ftrace.c | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 5b6bd45..d73d0b7 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1014,6 +1014,12 @@ ftrace_filter_lseek(struct file *file, loff_t offset, int whence)
 	return ret;
 }
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static int ftrace_graph_active;
+#else
+# define ftrace_graph_active 0
+#endif
+
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 #ifndef CONFIG_FTRACE_MCOUNT_RECORD
@@ -2056,24 +2062,36 @@ static int ftrace_shutdown(struct ftrace_ops *ops, int command)
 
 static void ftrace_startup_sysctl(void)
 {
+	int command;
+
 	if (unlikely(ftrace_disabled))
 		return;
 
 	/* Force update next time */
 	saved_ftrace_func = NULL;
 	/* ftrace_start_up is true if we want ftrace running */
-	if (ftrace_start_up)
-		ftrace_run_update_code(FTRACE_UPDATE_CALLS);
+	if (ftrace_start_up) {
+		command = FTRACE_UPDATE_CALLS;
+		if (ftrace_graph_active)
+			command |= FTRACE_START_FUNC_RET;
+		ftrace_run_update_code(command);
+	}
 }
 
 static void ftrace_shutdown_sysctl(void)
 {
+	int command;
+
 	if (unlikely(ftrace_disabled))
 		return;
 
 	/* ftrace_start_up is true if ftrace is running */
-	if (ftrace_start_up)
-		ftrace_run_update_code(FTRACE_DISABLE_CALLS);
+	if (ftrace_start_up) {
+		command = FTRACE_DISABLE_CALLS;
+		if (ftrace_graph_active)
+			command |= FTRACE_STOP_FUNC_RET;
+		ftrace_run_update_code(command);
+	}
 }
 
 static cycle_t		ftrace_update_time;
@@ -4465,7 +4483,6 @@ ftrace_enable_sysctl(struct ctl_table *table, int write,
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
-static int ftrace_graph_active;
 static struct notifier_block ftrace_suspend_notifier;
 
 int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace)
-- 
1.9.1

[PATCH 3.4 088/172] ftrace: Fix ftrace enable ordering of sysctl ftrace_enabled

[lizf]

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 524a38682573b2e15ab6317ccfe50280441514be upstream.

Some archs (specifically PowerPC), are sensitive with the ordering of
the enabling of the calls to function tracing and setting of the
function to use to be traced.

That is, update_ftrace_function() sets what function the ftrace_caller
trampoline should call. Some archs require this to be set before
calling ftrace_run_update_code().

Another bug was discovered, that ftrace_startup_sysctl() called
ftrace_run_update_code() directly. If the function the ftrace_caller
trampoline changes, then it will not be updated. Instead a call
to ftrace_startup_enable() should be called because it tests to see
if the callback changed since the code was disabled, and will
tell the arch to update appropriately. Most archs do not need this
notification, but PowerPC does.

The problem could be seen by the following commands:

 # echo 0 > /proc/sys/kernel/ftrace_enabled
 # echo function > /sys/kernel/debug/tracing/current_tracer
 # echo 1 > /proc/sys/kernel/ftrace_enabled
 # cat /sys/kernel/debug/tracing/trace

The trace will show that function tracing was not active.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 kernel/trace/ftrace.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index d73d0b7..ffea326 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -2074,7 +2074,7 @@ static void ftrace_startup_sysctl(void)
 		command = FTRACE_UPDATE_CALLS;
 		if (ftrace_graph_active)
 			command |= FTRACE_START_FUNC_RET;
-		ftrace_run_update_code(command);
+		ftrace_startup_enable(command);
 	}
 }
 
@@ -4463,12 +4463,12 @@ ftrace_enable_sysctl(struct ctl_table *table, int write,
 
 	if (ftrace_enabled) {
 
-		ftrace_startup_sysctl();
-
 		/* we are starting ftrace again */
 		if (ftrace_ops_list != &ftrace_list_end)
 			update_ftrace_function();
 
+		ftrace_startup_sysctl();
+
 	} else {
 		/* stopping ftrace calls (just send to ftrace_stub) */
 		ftrace_trace_function = ftrace_stub;
-- 
1.9.1

[PATCH 3.4 089/172] xen-pciback: limit guest control of command register

[lizf]

From: Jan Beulich <JBeulich@suse.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit af6fc858a35b90e89ea7a7ee58e66628c55c776b upstream.

Otherwise the guest can abuse that control to cause e.g. PCIe
Unsupported Request responses by disabling memory and/or I/O decoding
and subsequently causing (CPU side) accesses to the respective address
ranges, which (depending on system configuration) may be fatal to the
host.

Note that to alter any of the bits collected together as
PCI_COMMAND_GUEST permissive mode is now required to be enabled
globally or on the specific device.

This is CVE-2015-2150 / XSA-120.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/xen/xen-pciback/conf_space.c        |  2 +-
 drivers/xen/xen-pciback/conf_space.h        |  2 +
 drivers/xen/xen-pciback/conf_space_header.c | 61 +++++++++++++++++++++++------
 3 files changed, 51 insertions(+), 14 deletions(-)

diff --git a/drivers/xen/xen-pciback/conf_space.c b/drivers/xen/xen-pciback/conf_space.c
index 30d7be0..82ab1c3 100644
--- a/drivers/xen/xen-pciback/conf_space.c
+++ b/drivers/xen/xen-pciback/conf_space.c
@@ -16,7 +16,7 @@
 #include "conf_space.h"
 #include "conf_space_quirks.h"
 
-static bool permissive;
+bool permissive;
 module_param(permissive, bool, 0644);
 
 /* This is where xen_pcibk_read_config_byte, xen_pcibk_read_config_word,
diff --git a/drivers/xen/xen-pciback/conf_space.h b/drivers/xen/xen-pciback/conf_space.h
index e56c934..2e1d73d 100644
--- a/drivers/xen/xen-pciback/conf_space.h
+++ b/drivers/xen/xen-pciback/conf_space.h
@@ -64,6 +64,8 @@ struct config_field_entry {
 	void *data;
 };
 
+extern bool permissive;
+
 #define OFFSET(cfg_entry) ((cfg_entry)->base_offset+(cfg_entry)->field->offset)
 
 /* Add fields to a device - the add_fields macro expects to get a pointer to
diff --git a/drivers/xen/xen-pciback/conf_space_header.c b/drivers/xen/xen-pciback/conf_space_header.c
index 3daf862..a5bb81a 100644
--- a/drivers/xen/xen-pciback/conf_space_header.c
+++ b/drivers/xen/xen-pciback/conf_space_header.c
@@ -9,6 +9,10 @@
 #include "pciback.h"
 #include "conf_space.h"
 
+struct pci_cmd_info {
+	u16 val;
+};
+
 struct pci_bar_info {
 	u32 val;
 	u32 len_val;
@@ -18,22 +22,36 @@ struct pci_bar_info {
 #define is_enable_cmd(value) ((value)&(PCI_COMMAND_MEMORY|PCI_COMMAND_IO))
 #define is_master_cmd(value) ((value)&PCI_COMMAND_MASTER)
 
-static int command_read(struct pci_dev *dev, int offset, u16 *value, void *data)
+/* Bits guests are allowed to control in permissive mode. */
+#define PCI_COMMAND_GUEST (PCI_COMMAND_MASTER|PCI_COMMAND_SPECIAL| \
+			   PCI_COMMAND_INVALIDATE|PCI_COMMAND_VGA_PALETTE| \
+			   PCI_COMMAND_WAIT|PCI_COMMAND_FAST_BACK)
+
+static void *command_init(struct pci_dev *dev, int offset)
 {
-	int i;
-	int ret;
-
-	ret = xen_pcibk_read_config_word(dev, offset, value, data);
-	if (!pci_is_enabled(dev))
-		return ret;
-
-	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
-		if (dev->resource[i].flags & IORESOURCE_IO)
-			*value |= PCI_COMMAND_IO;
-		if (dev->resource[i].flags & IORESOURCE_MEM)
-			*value |= PCI_COMMAND_MEMORY;
+	struct pci_cmd_info *cmd = kmalloc(sizeof(*cmd), GFP_KERNEL);
+	int err;
+
+	if (!cmd)
+		return ERR_PTR(-ENOMEM);
+
+	err = pci_read_config_word(dev, PCI_COMMAND, &cmd->val);
+	if (err) {
+		kfree(cmd);
+		return ERR_PTR(err);
 	}
 
+	return cmd;
+}
+
+static int command_read(struct pci_dev *dev, int offset, u16 *value, void *data)
+{
+	int ret = pci_read_config_word(dev, offset, value);
+	const struct pci_cmd_info *cmd = data;
+
+	*value &= PCI_COMMAND_GUEST;
+	*value |= cmd->val & ~PCI_COMMAND_GUEST;
+
 	return ret;
 }
 
@@ -41,6 +59,8 @@ static int command_write(struct pci_dev *dev, int offset, u16 value, void *data)
 {
 	struct xen_pcibk_dev_data *dev_data;
 	int err;
+	u16 val;
+	struct pci_cmd_info *cmd = data;
 
 	dev_data = pci_get_drvdata(dev);
 	if (!pci_is_enabled(dev) && is_enable_cmd(value)) {
@@ -83,6 +103,19 @@ static int command_write(struct pci_dev *dev, int offset, u16 value, void *data)
 		}
 	}
 
+	cmd->val = value;
+
+	if (!permissive && (!dev_data || !dev_data->permissive))
+		return 0;
+
+	/* Only allow the guest to control certain bits. */
+	err = pci_read_config_word(dev, offset, &val);
+	if (err || val == value)
+		return err;
+
+	value &= PCI_COMMAND_GUEST;
+	value |= val & ~PCI_COMMAND_GUEST;
+
 	return pci_write_config_word(dev, offset, value);
 }
 
@@ -282,6 +315,8 @@ static const struct config_field header_common[] = {
 	{
 	 .offset    = PCI_COMMAND,
 	 .size      = 2,
+	 .init      = command_init,
+	 .release   = bar_release,
 	 .u.w.read  = command_read,
 	 .u.w.write = command_write,
 	},
-- 
1.9.1

[PATCH 3.4 090/172] drm/vmwgfx: Reorder device takedown somewhat

[lizf]

From: Thomas Hellstrom <thellstrom@vmware.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 3458390b9f0ba784481d23134798faee27b5f16f upstream.

To take down the MOB and GMR memory types, the driver may have to issue
fence objects and thus make sure that the fence manager is taken down
after those memory types.
Reorder device init accordingly.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 46 ++++++++++++++++++++-----------------
 1 file changed, 25 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index db50604..e43341a 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -547,21 +547,6 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 		goto out_err1;
 	}
 
-	ret = ttm_bo_init_mm(&dev_priv->bdev, TTM_PL_VRAM,
-			     (dev_priv->vram_size >> PAGE_SHIFT));
-	if (unlikely(ret != 0)) {
-		DRM_ERROR("Failed initializing memory manager for VRAM.\n");
-		goto out_err2;
-	}
-
-	dev_priv->has_gmr = true;
-	if (ttm_bo_init_mm(&dev_priv->bdev, VMW_PL_GMR,
-			   dev_priv->max_gmr_ids) != 0) {
-		DRM_INFO("No GMR memory available. "
-			 "Graphics memory resources are very limited.\n");
-		dev_priv->has_gmr = false;
-	}
-
 	dev_priv->mmio_mtrr = drm_mtrr_add(dev_priv->mmio_start,
 					   dev_priv->mmio_size, DRM_MTRR_WC);
 
@@ -618,6 +603,22 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 	ret = vmw_3d_resource_inc(dev_priv, true);
 	if (unlikely(ret != 0))
 		goto out_no_fifo;
+
+	ret = ttm_bo_init_mm(&dev_priv->bdev, TTM_PL_VRAM,
+			     (dev_priv->vram_size >> PAGE_SHIFT));
+	if (unlikely(ret != 0)) {
+		DRM_ERROR("Failed initializing memory manager for VRAM.\n");
+		goto out_no_vram;
+	}
+
+	dev_priv->has_gmr = true;
+	if (ttm_bo_init_mm(&dev_priv->bdev, VMW_PL_GMR,
+			   dev_priv->max_gmr_ids) != 0) {
+		DRM_INFO("No GMR memory available. "
+			 "Graphics memory resources are very limited.\n");
+		dev_priv->has_gmr = false;
+	}
+
 	vmw_kms_save_vga(dev_priv);
 
 	/* Start kms and overlay systems, needs fifo. */
@@ -663,6 +664,10 @@ out_no_kms:
 		vmw_kms_restore_vga(dev_priv);
 		vmw_3d_resource_dec(dev_priv, false);
 	}
+out_no_vram:
+	if (dev_priv->has_gmr)
+		(void) ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_GMR);
+	(void)ttm_bo_clean_mm(&dev_priv->bdev, TTM_PL_VRAM);
 out_no_fifo:
 	vmw_fence_manager_takedown(dev_priv->fman);
 out_no_fman:
@@ -677,9 +682,6 @@ out_err4:
 out_err3:
 	drm_mtrr_del(dev_priv->mmio_mtrr, dev_priv->mmio_start,
 		     dev_priv->mmio_size, DRM_MTRR_WC);
-	if (dev_priv->has_gmr)
-		(void) ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_GMR);
-	(void)ttm_bo_clean_mm(&dev_priv->bdev, TTM_PL_VRAM);
 out_err2:
 	(void)ttm_bo_device_release(&dev_priv->bdev);
 out_err1:
@@ -709,6 +711,11 @@ static int vmw_driver_unload(struct drm_device *dev)
 	}
 	vmw_kms_close(dev_priv);
 	vmw_overlay_close(dev_priv);
+
+	if (dev_priv->has_gmr)
+		(void)ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_GMR);
+	(void)ttm_bo_clean_mm(&dev_priv->bdev, TTM_PL_VRAM);
+
 	vmw_fence_manager_takedown(dev_priv->fman);
 	if (dev_priv->stealth)
 		pci_release_region(dev->pdev, 2);
@@ -719,9 +726,6 @@ static int vmw_driver_unload(struct drm_device *dev)
 	iounmap(dev_priv->mmio_virt);
 	drm_mtrr_del(dev_priv->mmio_mtrr, dev_priv->mmio_start,
 		     dev_priv->mmio_size, DRM_MTRR_WC);
-	if (dev_priv->has_gmr)
-		(void)ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_GMR);
-	(void)ttm_bo_clean_mm(&dev_priv->bdev, TTM_PL_VRAM);
 	(void)ttm_bo_device_release(&dev_priv->bdev);
 	vmw_ttm_global_release(dev_priv);
 	idr_destroy(&dev_priv->surface_idr);
-- 
1.9.1

[PATCH 3.4 091/172] ALSA: control: Add sanity checks for user ctl id name string

[lizf]

From: Takashi Iwai <tiwai@suse.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit be3bb8236db2d0fcd705062ae2e2a9d75131222f upstream.

There was no check about the id string of user control elements, so we
accepted even a control element with an empty string, which is
obviously bogus.  This patch adds more sanity checks of id strings.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/core/control.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/core/control.c b/sound/core/control.c
index e773d5e..8fb4d24 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -1164,6 +1164,10 @@ static int snd_ctl_elem_add(struct snd_ctl_file *file,
 
 	if (info->count < 1)
 		return -EINVAL;
+	if (!*info->id.name)
+		return -EINVAL;
+	if (strnlen(info->id.name, sizeof(info->id.name)) >= sizeof(info->id.name))
+		return -EINVAL;
 	access = info->access == 0 ? SNDRV_CTL_ELEM_ACCESS_READWRITE :
 		(info->access & (SNDRV_CTL_ELEM_ACCESS_READWRITE|
 				 SNDRV_CTL_ELEM_ACCESS_INACTIVE|
-- 
1.9.1

[PATCH 3.4 092/172] ALSA: snd-usb: add quirks for Roland UA-22

[lizf]

From: Daniel Mack <daniel@zonque.org>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit fcdcd1dec6d2c7b718385ec743ae5a9a233edad4 upstream.

The device complies to the UAC1 standard but hides that fact with
proprietary descriptors. The autodetect quirk for Roland devices
catches the audio interface but misses the MIDI part, so a specific
quirk is needed.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Reported-by: Rafa Lafuente <rafalafuente@gmail.com>
Tested-by: Raphaël Doursenaud <raphael@doursenaud.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/usb/quirks-table.h | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 5ef3579..2ad5d77 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -1871,6 +1871,36 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 		}
 	}
 },
+{
+	USB_DEVICE(0x0582, 0x0159),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		/* .vendor_name = "Roland", */
+		/* .product_name = "UA-22", */
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 1,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 2,
+				.type = QUIRK_MIDI_FIXED_ENDPOINT,
+				.data = & (const struct snd_usb_midi_endpoint_info) {
+					.out_cables = 0x0001,
+					.in_cables = 0x0001
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 
 /* Guillemot devices */
 {
-- 
1.9.1

[PATCH 3.4 093/172] fuse: notify: don't move pages

[lizf]

From: Miklos Szeredi <mszeredi@suse.cz>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 0d2783626a53d4c922f82d51fa675cb5d13f0d36 upstream.

fuse_try_move_page() is not prepared for replacing pages that have already
been read.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/fuse/dev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index f4246cf..8b3fd48 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1634,6 +1634,9 @@ copy_finish:
 static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code,
 		       unsigned int size, struct fuse_copy_state *cs)
 {
+	/* Don't try to move pages (yet) */
+	cs->move_pages = 0;
+
 	switch (code) {
 	case FUSE_NOTIFY_POLL:
 		return fuse_notify_poll(fc, size, cs);
-- 
1.9.1

[PATCH 3.4 094/172] fuse: set stolen page uptodate

[lizf]

From: Miklos Szeredi <mszeredi@suse.cz>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit aa991b3b267e24f578bac7b09cc57579b660304b upstream.

Regular pipe buffers' ->steal method (generic_pipe_buf_steal()) doesn't set
PG_uptodate.

Don't warn on this condition, just set the uptodate flag.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/fuse/dev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 8b3fd48..0949b83 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -717,8 +717,8 @@ static int fuse_try_move_page(struct fuse_copy_state *cs, struct page **pagep)
 
 	newpage = buf->page;
 
-	if (WARN_ON(!PageUptodate(newpage)))
-		return -EIO;
+	if (!PageUptodate(newpage))
+		SetPageUptodate(newpage);
 
 	ClearPageMappedToDisk(newpage);
 
-- 
1.9.1

[PATCH 3.4 095/172] dm: hold suspend_lock while suspending device during device deletion

[lizf]

From: Mikulas Patocka <mpatocka@redhat.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit ab7c7bb6f4ab95dbca96fcfc4463cd69843e3e24 upstream.

__dm_destroy() must take the suspend_lock so that its presuspend and
postsuspend calls do not race with an internal suspend.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/md/dm.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 8780a22..3bfbccc 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2295,10 +2295,16 @@ static void __dm_destroy(struct mapped_device *md, bool wait)
 	set_bit(DMF_FREEING, &md->flags);
 	spin_unlock(&_minor_lock);
 
+	/*
+	 * Take suspend_lock so that presuspend and postsuspend methods
+	 * do not race with internal suspend.
+	 */
+	mutex_lock(&md->suspend_lock);
 	if (!dm_suspended_md(md)) {
 		dm_table_presuspend_targets(map);
 		dm_table_postsuspend_targets(map);
 	}
+	mutex_unlock(&md->suspend_lock);
 
 	/*
 	 * Rare, but there may be I/O requests still going to complete,
-- 
1.9.1

[PATCH 3.4 096/172] dm io: deal with wandering queue limits when handling REQ_DISCARD and REQ_WRITE_SAME

[lizf]

From: "Darrick J. Wong" <darrick.wong@oracle.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit e5db29806b99ce2b2640d2e4d4fcb983cea115c5 upstream.

Since it's possible for the discard and write same queue limits to
change while the upper level command is being sliced and diced, fix up
both of them (a) to reject IO if the special command is unsupported at
the start of the function and (b) read the limits once and let the
commands error out on their own if the status happens to change.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
[lizf: Backported to 3.4:
 - adjust context
 - 3.4 doesn't support REQ_WRITE_SAME]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/md/dm-io.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index d3b1b54..489d7fb 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -298,11 +298,17 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where,
 	sector_t remaining = where->count;
 	struct request_queue *q = bdev_get_queue(where->bdev);
 	sector_t discard_sectors;
+	unsigned int uninitialized_var(special_cmd_max_sectors);
 
-	/* Reject unsupported discard requests */
-	if ((rw & REQ_DISCARD) && !blk_queue_discard(q)) {
-		dec_count(io, region, -EOPNOTSUPP);
-		return;
+	/*
+	 * Reject unsupported discard and write same requests.
+	 */
+	if (rw & REQ_DISCARD) {
+		special_cmd_max_sectors = q->limits.max_discard_sectors;
+		if (special_cmd_max_sectors == 0) {
+			dec_count(io, region, -EOPNOTSUPP);
+			return;
+		}
 	}
 
 	/*
@@ -327,7 +333,7 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where,
 		store_io_and_region_in_bio(bio, io, region);
 
 		if (rw & REQ_DISCARD) {
-			discard_sectors = min_t(sector_t, q->limits.max_discard_sectors, remaining);
+			discard_sectors = min_t(sector_t, special_cmd_max_sectors, remaining);
 			bio->bi_size = discard_sectors << SECTOR_SHIFT;
 			remaining -= discard_sectors;
 		} else while (remaining) {
-- 
1.9.1

[PATCH 3.4 097/172] mac80211: drop unencrypted frames in mesh fwding

[lizf]

From: Bob Copeland <me@bobcopeland.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit d0c22119f574b851e63360c6b8660fe9593bbc3c upstream.

The mesh forwarding path was not checking that data
frames were protected when running an encrypted network;
add the necessary check.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/mac80211/rx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 24f2a41..dcd632f 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1926,6 +1926,9 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
 	hdr = (struct ieee80211_hdr *) skb->data;
 	mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen);
 
+	if (ieee80211_drop_unencrypted(rx, hdr->frame_control))
+		return RX_DROP_MONITOR;
+
 	/* frame is in RMC, don't forward */
 	if (ieee80211_is_data(hdr->frame_control) &&
 	    is_multicast_ether_addr(hdr->addr1) &&
-- 
1.9.1

[PATCH 3.4 098/172] mac80211: set only VO as a U-APSD enabled AC

[lizf]

From: Arik Nemtsov <arik@wizery.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit d6a4ed6fe0a0d4790941e7f13e56630b8b9b053d upstream.

Some APs experience problems when working with U-APSD. Decrease the
probability of that happening by using legacy mode for all ACs but VO.

The AP that caused us troubles was a Cisco 4410N. It ignores our
setting, and always treats non-VO ACs as legacy.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/mac80211/ieee80211_i.h | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 226be13..f5a0a96 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -54,11 +54,14 @@ struct ieee80211_local;
 
 #define TU_TO_EXP_TIME(x)	(jiffies + usecs_to_jiffies((x) * 1024))
 
+/*
+ * Some APs experience problems when working with U-APSD. Decrease the
+ * probability of that happening by using legacy mode for all ACs but VO.
+ * The AP that caused us trouble was a Cisco 4410N. It ignores our
+ * setting, and always treats non-VO ACs as legacy.
+ */
 #define IEEE80211_DEFAULT_UAPSD_QUEUES \
-	(IEEE80211_WMM_IE_STA_QOSINFO_AC_BK |	\
-	 IEEE80211_WMM_IE_STA_QOSINFO_AC_BE |	\
-	 IEEE80211_WMM_IE_STA_QOSINFO_AC_VI |	\
-	 IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
+	IEEE80211_WMM_IE_STA_QOSINFO_AC_VO
 
 #define IEEE80211_DEFAULT_MAX_SP_LEN		\
 	IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL
-- 
1.9.1

[PATCH 3.4 099/172] mac80211: disable u-APSD queues by default

[lizf]

From: Michal Kazior <michal.kazior@tieto.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit aa75ebc275b2a91b193654a177daf900ad6703f0 upstream.

Some APs experience problems when working with
U-APSD. Decreasing the probability of that
happening by using legacy mode for all ACs but VO
isn't enough.

Cisco 4410N originally forced us to enable VO by
default only because it treated non-VO ACs as
legacy.

However some APs (notably Netgear R7000) silently
reclassify packets to different ACs. Since u-APSD
ACs require trigger frames for frame retrieval
clients would never see some frames (e.g. ARP
responses) or would fetch them accidentally after
a long time.

It makes little sense to enable u-APSD queues by
default because it needs userspace applications to
be aware of it to actually take advantage of the
possible additional powersavings. Implicitly
depending on driver autotrigger frame support
doesn't make much sense.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/mac80211/ieee80211_i.h | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index f5a0a96..ca07c5e 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -55,13 +55,24 @@ struct ieee80211_local;
 #define TU_TO_EXP_TIME(x)	(jiffies + usecs_to_jiffies((x) * 1024))
 
 /*
- * Some APs experience problems when working with U-APSD. Decrease the
- * probability of that happening by using legacy mode for all ACs but VO.
- * The AP that caused us trouble was a Cisco 4410N. It ignores our
- * setting, and always treats non-VO ACs as legacy.
+ * Some APs experience problems when working with U-APSD. Decreasing the
+ * probability of that happening by using legacy mode for all ACs but VO isn't
+ * enough.
+ *
+ * Cisco 4410N originally forced us to enable VO by default only because it
+ * treated non-VO ACs as legacy.
+ *
+ * However some APs (notably Netgear R7000) silently reclassify packets to
+ * different ACs. Since u-APSD ACs require trigger frames for frame retrieval
+ * clients would never see some frames (e.g. ARP responses) or would fetch them
+ * accidentally after a long time.
+ *
+ * It makes little sense to enable u-APSD queues by default because it needs
+ * userspace applications to be aware of it to actually take advantage of the
+ * possible additional powersavings. Implicitly depending on driver autotrigger
+ * frame support doesn't make much sense.
  */
-#define IEEE80211_DEFAULT_UAPSD_QUEUES \
-	IEEE80211_WMM_IE_STA_QOSINFO_AC_VO
+#define IEEE80211_DEFAULT_UAPSD_QUEUES 0
 
 #define IEEE80211_DEFAULT_MAX_SP_LEN		\
 	IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL
-- 
1.9.1

[PATCH 3.4 100/172] virtio_console: init work unconditionally

[lizf]

From: "Michael S. Tsirkin" <mst@redhat.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 4f6e24ed9de8634d6471ef86b382cba6d4e57ca8 upstream.

when multiport is off, we don't initialize config work,
but we then cancel uninitialized control_work on freeze.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/char/virtio_console.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index a81f469..82650b4 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1752,12 +1752,13 @@ static int __devinit virtcons_probe(struct virtio_device *vdev)
 	spin_lock_init(&portdev->ports_lock);
 	INIT_LIST_HEAD(&portdev->ports);
 
+	INIT_WORK(&portdev->control_work, &control_work_handler);
+
 	if (multiport) {
 		unsigned int nr_added_bufs;
 
 		spin_lock_init(&portdev->c_ivq_lock);
 		spin_lock_init(&portdev->c_ovq_lock);
-		INIT_WORK(&portdev->control_work, &control_work_handler);
 
 		nr_added_bufs = fill_queue(portdev->c_ivq,
 					   &portdev->c_ivq_lock);
-- 
1.9.1

[PATCH 3.4 101/172] virtio_console: avoid config access from irq

[lizf]

From: "Michael S. Tsirkin" <mst@redhat.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit eeb8a7e8bb123e84daeef84f5a2eab99ad2839a2 upstream.

when multiport is off, virtio console invokes config access from irq
context, config access is blocking on s390.
Fix this up by scheduling work from config irq - similar to what we do
for multiport configs.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/char/virtio_console.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 82650b4..96f4a50 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -124,6 +124,7 @@ struct ports_device {
 	 * notification
 	 */
 	struct work_struct control_work;
+	struct work_struct config_work;
 
 	struct list_head ports;
 
@@ -1555,10 +1556,21 @@ static void config_intr(struct virtio_device *vdev)
 
 	portdev = vdev->priv;
 
+	if (!use_multiport(portdev))
+		schedule_work(&portdev->config_work);
+}
+
+static void config_work_handler(struct work_struct *work)
+{
+	struct ports_device *portdev;
+
+	portdev = container_of(work, struct ports_device, control_work);
 	if (!use_multiport(portdev)) {
+		struct virtio_device *vdev;
 		struct port *port;
 		u16 rows, cols;
 
+		vdev = portdev->vdev;
 		vdev->config->get(vdev,
 				  offsetof(struct virtio_console_config, cols),
 				  &cols, sizeof(u16));
@@ -1752,6 +1764,7 @@ static int __devinit virtcons_probe(struct virtio_device *vdev)
 	spin_lock_init(&portdev->ports_lock);
 	INIT_LIST_HEAD(&portdev->ports);
 
+	INIT_WORK(&portdev->config_work, &config_work_handler);
 	INIT_WORK(&portdev->control_work, &control_work_handler);
 
 	if (multiport) {
@@ -1826,6 +1839,8 @@ static void virtcons_remove(struct virtio_device *vdev)
 	/* Finish up work that's lined up */
 	if (use_multiport(portdev))
 		cancel_work_sync(&portdev->control_work);
+	else
+		cancel_work_sync(&portdev->config_work);
 
 	list_for_each_entry_safe(port, port2, &portdev->ports, list)
 		unplug_port(port);
@@ -1867,6 +1882,7 @@ static int virtcons_freeze(struct virtio_device *vdev)
 
 	virtqueue_disable_cb(portdev->c_ivq);
 	cancel_work_sync(&portdev->control_work);
+	cancel_work_sync(&portdev->config_work);
 	/*
 	 * Once more: if control_work_handler() was running, it would
 	 * enable the cb as the last step.
-- 
1.9.1

[PATCH 3.4 102/172] x86/vdso: Fix the build on GCC5

[lizf]

From: Jiri Slaby <jslaby@suse.cz>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit e893286918d2cde3a94850d8f7101cd1039e0c62 upstream.

On gcc5 the kernel does not link:

  ld: .eh_frame_hdr table[4] FDE at 0000000000000648 overlaps table[5] FDE at 0000000000000670.

Because prior GCC versions always emitted NOPs on ALIGN directives, but
gcc5 started omitting them.

.LSTARTFDEDLSI1 says:

        /* HACK: The dwarf2 unwind routines will subtract 1 from the
           return address to get an address in the middle of the
           presumed call instruction.  Since we didn't get here via
           a call, we need to include the nop before the real start
           to make up for it.  */
        .long .LSTART_sigreturn-1-.     /* PC-relative start address */

But commit 69d0627a7f6e ("x86 vDSO: reorder vdso32 code") from 2.6.25
replaced .org __kernel_vsyscall+32,0x90 by ALIGN right before
__kernel_sigreturn.

Of course, ALIGN need not generate any NOP in there. Esp. gcc5 collapses
vclock_gettime.o and int80.o together with no generated NOPs as "ALIGN".

So fix this by adding to that point at least a single NOP and make the
function ALIGN possibly with more NOPs then.

Kudos for reporting and diagnosing should go to Richard.

Reported-by: Richard Biener <rguenther@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1425543211-12542-1-git-send-email-jslaby@suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/x86/vdso/vdso32/sigreturn.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/vdso/vdso32/sigreturn.S b/arch/x86/vdso/vdso32/sigreturn.S
index 31776d0..d7ec4e2 100644
--- a/arch/x86/vdso/vdso32/sigreturn.S
+++ b/arch/x86/vdso/vdso32/sigreturn.S
@@ -17,6 +17,7 @@
 	.text
 	.globl __kernel_sigreturn
 	.type __kernel_sigreturn,@function
+	nop /* this guy is needed for .LSTARTFDEDLSI1 below (watch for HACK) */
 	ALIGN
 __kernel_sigreturn:
 .LSTART_sigreturn:
-- 
1.9.1

[PATCH 3.4 103/172] ASoC: sgtl5000: remove useless register write clearing CHRGPUMP_POWERUP

[lizf]

From: Eric Nelson <eric.nelson@boundarydevices.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit c7d910b87d3c8e9fcf4077089ca4327c12eee099 upstream.

The SGTL5000_CHIP_ANA_POWER register is cached. Update the cached
value instead of writing it directly.

Patch inspired by Russell King's more colorful remarks in this
patch:
	https://github.com/SolidRun/linux-imx6-3.14/commit/dd4bf6a

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/soc/codecs/sgtl5000.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 87cbf14..e8a7608f 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1107,13 +1107,7 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
 		/* Enable VDDC charge pump */
 		ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
 	} else if (vddio >= 3100 && vdda >= 3100) {
-		/*
-		 * if vddio and vddd > 3.1v,
-		 * charge pump should be clean before set ana_pwr
-		 */
-		snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
-				SGTL5000_VDDC_CHRGPMP_POWERUP, 0);
-
+		ana_pwr &= ~SGTL5000_VDDC_CHRGPMP_POWERUP;
 		/* VDDC use VDDIO rail */
 		lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
 		lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
-- 
1.9.1

[PATCH 3.4 104/172] Input: synaptics - query min dimensions for fw v8.1

[lizf]

From: Daniel Martin <consume.noise@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit ac097930f0730a9b777737de2b51e0fc49d2be7a upstream.

Query the min dimensions even if the check
SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 fails, but we know that the
firmware version 8.1 is safe.

With that we don't need quirks for post-2013 models anymore as they expose
correct min and max dimensions.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=91541

Signed-off-by: Daniel Martin <consume.noise@gmail.com>
  re-order the tests to check SYN_CAP_MIN_DIMENSIONS even on FW 8.1
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/input/mouse/synaptics.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 97e5f6f..11c732e 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -274,8 +274,14 @@ static int synaptics_resolution(struct psmouse *psmouse)
 		}
 	}
 
-	if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 &&
-	    SYN_CAP_MIN_DIMENSIONS(priv->ext_cap_0c)) {
+	if (SYN_CAP_MIN_DIMENSIONS(priv->ext_cap_0c) &&
+	    (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 ||
+	     /*
+	      * Firmware v8.1 does not report proper number of extended
+	      * capabilities, but has been proven to report correct min
+	      * coordinates.
+	      */
+	     SYN_ID_FULL(priv->identity) == 0x801)) {
 		if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MIN_COORDS, resp)) {
 			psmouse_warn(psmouse,
 				     "device claims to have min coordinates query, but I'm not able to read it.\n");
-- 
1.9.1

[PATCH 3.4 105/172] Input: synaptics - fix middle button on Lenovo 2015 products

[lizf]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit dc5465dc8a6d5cae8a0e1d8826bdcb2e4cb261ab upstream.

On the X1 Carbon 3rd gen (with a 2015 broadwell cpu), the physical middle
button of the trackstick (attached to the touchpad serio device, of course)
seems to get lost.

Actually, the touchpads reports 3 extra buttons, which falls in the switch
below to the '2' case. Let's handle the case of odd numbers also, so that
the middle button finds its way back.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[lizf: Backported to 3.4: open-code GENMASK]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/input/mouse/synaptics.c | 44 ++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 23 deletions(-)

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 11c732e..6524498 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -512,6 +512,18 @@ static void synaptics_parse_agm(const unsigned char buf[],
 	priv->agm_pending = true;
 }
 
+static void synaptics_parse_ext_buttons(const unsigned char buf[],
+					struct synaptics_data *priv,
+					struct synaptics_hw_state *hw)
+{
+	unsigned int ext_bits =
+		(SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) + 1) >> 1;
+	unsigned int ext_mask = (1U << ext_bits) - 1;
+
+	hw->ext_buttons = buf[4] & ext_mask;
+	hw->ext_buttons |= (buf[5] & ext_mask) << ext_bits;
+}
+
 static bool is_forcepad;
 
 static int synaptics_parse_hw_state(const unsigned char buf[],
@@ -598,28 +610,9 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
 			hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0;
 		}
 
-		if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) &&
+		if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) > 0 &&
 		    ((buf[0] ^ buf[3]) & 0x02)) {
-			switch (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) & ~0x01) {
-			default:
-				/*
-				 * if nExtBtn is greater than 8 it should be
-				 * considered invalid and treated as 0
-				 */
-				break;
-			case 8:
-				hw->ext_buttons |= ((buf[5] & 0x08)) ? 0x80 : 0;
-				hw->ext_buttons |= ((buf[4] & 0x08)) ? 0x40 : 0;
-			case 6:
-				hw->ext_buttons |= ((buf[5] & 0x04)) ? 0x20 : 0;
-				hw->ext_buttons |= ((buf[4] & 0x04)) ? 0x10 : 0;
-			case 4:
-				hw->ext_buttons |= ((buf[5] & 0x02)) ? 0x08 : 0;
-				hw->ext_buttons |= ((buf[4] & 0x02)) ? 0x04 : 0;
-			case 2:
-				hw->ext_buttons |= ((buf[5] & 0x01)) ? 0x02 : 0;
-				hw->ext_buttons |= ((buf[4] & 0x01)) ? 0x01 : 0;
-			}
+			synaptics_parse_ext_buttons(buf, priv, hw);
 		}
 	} else {
 		hw->x = (((buf[1] & 0x1f) << 8) | buf[2]);
@@ -686,6 +679,7 @@ static void synaptics_report_buttons(struct psmouse *psmouse,
 {
 	struct input_dev *dev = psmouse->dev;
 	struct synaptics_data *priv = psmouse->private;
+	int ext_bits = (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) + 1) >> 1;
 	int i;
 
 	input_report_key(dev, BTN_LEFT, hw->left);
@@ -699,8 +693,12 @@ static void synaptics_report_buttons(struct psmouse *psmouse,
 		input_report_key(dev, BTN_BACK, hw->down);
 	}
 
-	for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++)
-		input_report_key(dev, BTN_0 + i, hw->ext_buttons & (1 << i));
+	for (i = 0; i < ext_bits; i++) {
+		input_report_key(dev, BTN_0 + 2 * i,
+				 hw->ext_buttons & (1 << i));
+		input_report_key(dev, BTN_1 + 2 * i,
+				 hw->ext_buttons & (1 << (i + ext_bits)));
+	}
 }
 
 static void synaptics_report_slot(struct input_dev *dev, int slot,
-- 
1.9.1

[PATCH 3.4 106/172] Input: synaptics - handle spurious release of trackstick buttons

[lizf]

From: Benjamin Tissoires <benjamin.tissoires@redhat.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit ebc80840b850db72f7ae84fbcf77630ae5409629 upstream.

The Fimware 8.1 has a bug in which the extra buttons are only sent when the
ExtBit is 1.  This should be fixed in a future FW update which should have
a bump of the minor version.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/input/mouse/synaptics.c | 33 +++++++++++++++++++++++++--------
 1 file changed, 25 insertions(+), 8 deletions(-)

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 6524498..6d6198a 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -674,14 +674,36 @@ static void synaptics_report_semi_mt_data(struct input_dev *dev,
 	}
 }
 
-static void synaptics_report_buttons(struct psmouse *psmouse,
-				     const struct synaptics_hw_state *hw)
+static void synaptics_report_ext_buttons(struct psmouse *psmouse,
+					 const struct synaptics_hw_state *hw)
 {
 	struct input_dev *dev = psmouse->dev;
 	struct synaptics_data *priv = psmouse->private;
 	int ext_bits = (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) + 1) >> 1;
 	int i;
 
+	if (!SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap))
+		return;
+
+	/* Bug in FW 8.1, buttons are reported only when ExtBit is 1 */
+	if (SYN_ID_FULL(priv->identity) == 0x801 &&
+	    !((psmouse->packet[0] ^ psmouse->packet[3]) & 0x02))
+		return;
+
+	for (i = 0; i < ext_bits; i++) {
+		input_report_key(dev, BTN_0 + 2 * i,
+			hw->ext_buttons & (1 << i));
+		input_report_key(dev, BTN_1 + 2 * i,
+			hw->ext_buttons & (1 << (i + ext_bits)));
+	}
+}
+
+static void synaptics_report_buttons(struct psmouse *psmouse,
+				     const struct synaptics_hw_state *hw)
+{
+	struct input_dev *dev = psmouse->dev;
+	struct synaptics_data *priv = psmouse->private;
+
 	input_report_key(dev, BTN_LEFT, hw->left);
 	input_report_key(dev, BTN_RIGHT, hw->right);
 
@@ -693,12 +715,7 @@ static void synaptics_report_buttons(struct psmouse *psmouse,
 		input_report_key(dev, BTN_BACK, hw->down);
 	}
 
-	for (i = 0; i < ext_bits; i++) {
-		input_report_key(dev, BTN_0 + 2 * i,
-				 hw->ext_buttons & (1 << i));
-		input_report_key(dev, BTN_1 + 2 * i,
-				 hw->ext_buttons & (1 << (i + ext_bits)));
-	}
+	synaptics_report_ext_buttons(psmouse, hw);
 }
 
 static void synaptics_report_slot(struct input_dev *dev, int slot,
-- 
1.9.1

[PATCH 3.4 107/172] vt6655: RFbSetPower fix missing rate RATE_12M

[lizf]

From: Malcolm Priestley <tvboxspy@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 40c8790bcb7ac74f3038153cd09310e220c6a1df upstream.

When the driver sets this rate a power of zero value is set causing
data flow stoppage until another rate is tried.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[lizf: Backported to 3.4: adjust indentation]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/staging/vt6655/rf.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/vt6655/rf.c b/drivers/staging/vt6655/rf.c
index b8ec783..3003363 100644
--- a/drivers/staging/vt6655/rf.c
+++ b/drivers/staging/vt6655/rf.c
@@ -1029,6 +1029,7 @@ unsigned char byPwrdBm = 0;
 		break;
     case RATE_6M:
     case RATE_9M:
+    case RATE_12M:
     case RATE_18M:
         byPwr = pDevice->abyOFDMPwrTbl[uCH];
         if (pDevice->byRFType == RF_UW2452) {
-- 
1.9.1

[PATCH 3.4 108/172] x86/asm/entry/32: Fix user_mode() misuses

[lizf]

From: Andy Lutomirski <luto@amacapital.net>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 394838c96013ba414a24ffe7a2a593a9154daadf upstream.

The one in do_debug() is probably harmless, but better safe than sorry.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/d67deaa9df5458363623001f252d1aee3215d014.1425948056.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[lizf: Backported to 3.4: drop the change to do_bounds()]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/x86/kernel/traps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 9bfe95f..adc049f 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -435,7 +435,7 @@ dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 	 * then it's very likely the result of an icebp/int01 trap.
 	 * User wants a sigtrap for that.
 	 */
-	if (!dr6 && user_mode(regs))
+	if (!dr6 && user_mode_vm(regs))
 		user_icebp = 1;
 
 	/* Catch kmemcheck conditions first of all! */
-- 
1.9.1

[PATCH 3.4 109/172] ASoC: adav80x: Fix wrong value references for boolean kctl

[lizf]

From: Takashi Iwai <tiwai@suse.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 2bf4c1d483d911cda5dd385527194d23e5cea73d upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/soc/codecs/adav80x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/adav80x.c b/sound/soc/codecs/adav80x.c
index ebd7b37..81e0e27 100644
--- a/sound/soc/codecs/adav80x.c
+++ b/sound/soc/codecs/adav80x.c
@@ -307,7 +307,7 @@ static int adav80x_put_deemph(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct adav80x *adav80x = snd_soc_codec_get_drvdata(codec);
-	unsigned int deemph = ucontrol->value.enumerated.item[0];
+	unsigned int deemph = ucontrol->value.integer.value[0];
 
 	if (deemph > 1)
 		return -EINVAL;
@@ -323,7 +323,7 @@ static int adav80x_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct adav80x *adav80x = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = adav80x->deemph;
+	ucontrol->value.integer.value[0] = adav80x->deemph;
 	return 0;
 };
 
-- 
1.9.1

[PATCH 3.4 110/172] ASoC: ak4641: Fix wrong value references for boolean kctl

[lizf]

From: Takashi Iwai <tiwai@suse.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 08641d9b7bf915144a57a736b42642e13eb1167f upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/soc/codecs/ak4641.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/ak4641.c b/sound/soc/codecs/ak4641.c
index c4d165a..e1773e0 100644
--- a/sound/soc/codecs/ak4641.c
+++ b/sound/soc/codecs/ak4641.c
@@ -74,7 +74,7 @@ static int ak4641_put_deemph(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct ak4641_priv *ak4641 = snd_soc_codec_get_drvdata(codec);
-	int deemph = ucontrol->value.enumerated.item[0];
+	int deemph = ucontrol->value.integer.value[0];
 
 	if (deemph > 1)
 		return -EINVAL;
@@ -90,7 +90,7 @@ static int ak4641_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct ak4641_priv *ak4641 = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = ak4641->deemph;
+	ucontrol->value.integer.value[0] = ak4641->deemph;
 	return 0;
 };
 
-- 
1.9.1

[PATCH 3.4 111/172] ASoC: cs4271: Fix wrong value references for boolean kctl

[lizf]

From: Takashi Iwai <tiwai@suse.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit e8371aa0fecb73fb8a4b2e0296b025b11e7d6229 upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/soc/codecs/cs4271.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c
index bf71412..f9e2bda 100644
--- a/sound/soc/codecs/cs4271.c
+++ b/sound/soc/codecs/cs4271.c
@@ -261,7 +261,7 @@ static int cs4271_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct cs4271_private *cs4271 = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = cs4271->deemph;
+	ucontrol->value.integer.value[0] = cs4271->deemph;
 	return 0;
 }
 
@@ -271,7 +271,7 @@ static int cs4271_put_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct cs4271_private *cs4271 = snd_soc_codec_get_drvdata(codec);
 
-	cs4271->deemph = ucontrol->value.enumerated.item[0];
+	cs4271->deemph = ucontrol->value.integer.value[0];
 	return cs4271_set_deemph(codec);
 }
 
-- 
1.9.1

[PATCH 3.4 112/172] ASoC: wm2000: Fix wrong value references for boolean kctl

[lizf]

From: Takashi Iwai <tiwai@suse.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 00a14c2968e3d55817e0fa35c78106ca840537bf upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/soc/codecs/wm2000.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c
index bb9f070..fb1f0a7 100644
--- a/sound/soc/codecs/wm2000.c
+++ b/sound/soc/codecs/wm2000.c
@@ -581,7 +581,7 @@ static int wm2000_anc_mode_get(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
 
-	ucontrol->value.enumerated.item[0] = wm2000->anc_active;
+	ucontrol->value.integer.value[0] = wm2000->anc_active;
 
 	return 0;
 }
@@ -591,7 +591,7 @@ static int wm2000_anc_mode_put(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
-	int anc_active = ucontrol->value.enumerated.item[0];
+	int anc_active = ucontrol->value.integer.value[0];
 
 	if (anc_active > 1)
 		return -EINVAL;
@@ -607,7 +607,7 @@ static int wm2000_speaker_get(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
 
-	ucontrol->value.enumerated.item[0] = wm2000->spk_ena;
+	ucontrol->value.integer.value[0] = wm2000->spk_ena;
 
 	return 0;
 }
@@ -617,7 +617,7 @@ static int wm2000_speaker_put(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
-	int val = ucontrol->value.enumerated.item[0];
+	int val = ucontrol->value.integer.value[0];
 
 	if (val > 1)
 		return -EINVAL;
-- 
1.9.1

[PATCH 3.4 113/172] ASoC: wm8731: Fix wrong value references for boolean kctl

[lizf]

From: Takashi Iwai <tiwai@suse.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit bd14016fbf31aa199026f1e2358eab695f374eb1 upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/soc/codecs/wm8731.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 8b5afc1..3616b5b 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -120,7 +120,7 @@ static int wm8731_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = wm8731->deemph;
+	ucontrol->value.integer.value[0] = wm8731->deemph;
 
 	return 0;
 }
@@ -130,7 +130,7 @@ static int wm8731_put_deemph(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
-	int deemph = ucontrol->value.enumerated.item[0];
+	int deemph = ucontrol->value.integer.value[0];
 	int ret = 0;
 
 	if (deemph > 1)
-- 
1.9.1

[PATCH 3.4 114/172] ASoC: wm8903: Fix wrong value references for boolean kctl

[lizf]

From: Takashi Iwai <tiwai@suse.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 24cc883c1fd16df34211ae41624aa6d3cd906693 upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/soc/codecs/wm8903.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index 77758542..776653d 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -445,7 +445,7 @@ static int wm8903_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = wm8903->deemph;
+	ucontrol->value.integer.value[0] = wm8903->deemph;
 
 	return 0;
 }
@@ -455,7 +455,7 @@ static int wm8903_put_deemph(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
-	int deemph = ucontrol->value.enumerated.item[0];
+	int deemph = ucontrol->value.integer.value[0];
 	int ret = 0;
 
 	if (deemph > 1)
-- 
1.9.1

[PATCH 3.4 115/172] ASoC: wm8904: Fix wrong value references for boolean kctl

[lizf]

From: Takashi Iwai <tiwai@suse.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit eaddf6fd959074f6a6e71deffe079c71eef35da6 upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/soc/codecs/wm8904.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index c93e360..19f3040 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -528,7 +528,7 @@ static int wm8904_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = wm8904->deemph;
+	ucontrol->value.integer.value[0] = wm8904->deemph;
 	return 0;
 }
 
@@ -537,7 +537,7 @@ static int wm8904_put_deemph(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
-	int deemph = ucontrol->value.enumerated.item[0];
+	int deemph = ucontrol->value.integer.value[0];
 
 	if (deemph > 1)
 		return -EINVAL;
-- 
1.9.1

[PATCH 3.4 116/172] ASoC: wm8955: Fix wrong value references for boolean kctl

[lizf]

From: Takashi Iwai <tiwai@suse.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 07892b10356f17717abdc578acbef72db86c880e upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/soc/codecs/wm8955.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c
index 61fe974..4696f66 100644
--- a/sound/soc/codecs/wm8955.c
+++ b/sound/soc/codecs/wm8955.c
@@ -393,7 +393,7 @@ static int wm8955_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = wm8955->deemph;
+	ucontrol->value.integer.value[0] = wm8955->deemph;
 	return 0;
 }
 
@@ -402,7 +402,7 @@ static int wm8955_put_deemph(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
-	int deemph = ucontrol->value.enumerated.item[0];
+	int deemph = ucontrol->value.integer.value[0];
 
 	if (deemph > 1)
 		return -EINVAL;
-- 
1.9.1

[PATCH 3.4 117/172] ASoC: wm8960: Fix wrong value references for boolean kctl

[lizf]

From: Takashi Iwai <tiwai@suse.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit b4a18c8b1af15ebfa9054a3d2aef7b0a7e6f2a05 upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/soc/codecs/wm8960.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index a09d7eb..a3e4831 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -132,7 +132,7 @@ static int wm8960_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = wm8960->deemph;
+	ucontrol->value.integer.value[0] = wm8960->deemph;
 	return 0;
 }
 
@@ -141,7 +141,7 @@ static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
-	int deemph = ucontrol->value.enumerated.item[0];
+	int deemph = ucontrol->value.integer.value[0];
 
 	if (deemph > 1)
 		return -EINVAL;
-- 
1.9.1

[PATCH 3.4 118/172] crypto: aesni - fix memory usage in GCM decryption

[lizf]

From: Stephan Mueller <smueller@chronox.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit ccfe8c3f7e52ae83155cb038753f4c75b774ca8a upstream.

The kernel crypto API logic requires the caller to provide the
length of (ciphertext || authentication tag) as cryptlen for the
AEAD decryption operation. Thus, the cipher implementation must
calculate the size of the plaintext output itself and cannot simply use
cryptlen.

The RFC4106 GCM decryption operation tries to overwrite cryptlen memory
in req->dst. As the destination buffer for decryption only needs to hold
the plaintext memory but cryptlen references the input buffer holding
(ciphertext || authentication tag), the assumption of the destination
buffer length in RFC4106 GCM operation leads to a too large size. This
patch simply uses the already calculated plaintext size.

In addition, this patch fixes the offset calculation of the AAD buffer
pointer: as mentioned before, cryptlen already includes the size of the
tag. Thus, the tag does not need to be added. With the addition, the AAD
will be written beyond the already allocated buffer.

Note, this fixes a kernel crash that can be triggered from user space
via AF_ALG(aead) -- simply use the libkcapi test application
from [1] and update it to use rfc4106-gcm-aes.

Using [1], the changes were tested using CAVS vectors to demonstrate
that the crypto operation still delivers the right results.

[1] http://www.chronox.de/libkcapi.html

CC: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/x86/crypto/aesni-intel_glue.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index c799352..51afabd 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -1203,7 +1203,7 @@ static int __driver_rfc4106_decrypt(struct aead_request *req)
 		src = kmalloc(req->cryptlen + req->assoclen, GFP_ATOMIC);
 		if (!src)
 			return -ENOMEM;
-		assoc = (src + req->cryptlen + auth_tag_len);
+		assoc = (src + req->cryptlen);
 		scatterwalk_map_and_copy(src, req->src, 0, req->cryptlen, 0);
 		scatterwalk_map_and_copy(assoc, req->assoc, 0,
 			req->assoclen, 0);
@@ -1228,7 +1228,7 @@ static int __driver_rfc4106_decrypt(struct aead_request *req)
 		scatterwalk_done(&src_sg_walk, 0, 0);
 		scatterwalk_done(&assoc_sg_walk, 0, 0);
 	} else {
-		scatterwalk_map_and_copy(dst, req->dst, 0, req->cryptlen, 1);
+		scatterwalk_map_and_copy(dst, req->dst, 0, tempCipherLen, 1);
 		kfree(src);
 	}
 	return retval;
-- 
1.9.1

[PATCH 3.4 119/172] nl80211: ignore HT/VHT capabilities without QoS/WMM

[lizf]

From: Johannes Berg <johannes.berg@intel.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 496fcc294daab18799e190c0264863d653588d1f upstream.

As HT/VHT depend heavily on QoS/WMM, it's not a good idea to
let userspace add clients that have HT/VHT but not QoS/WMM.
Since it does so in certain cases we've observed (client is
using HT IEs but not QoS/WMM) just ignore the HT/VHT info at
this point and don't pass it down to the drivers which might
unconditionally use it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[lizf: Backported to 3.4:
 - adjust context
 - 3.4 doesn't support VHT]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/wireless/nl80211.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 63c1807..263cbd8 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2810,6 +2810,14 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 	if (parse_station_flags(info, dev->ieee80211_ptr->iftype, &params))
 		return -EINVAL;
 
+	/* HT requires QoS, but if we don't have that just ignore HT/VHT
+	 * as userspace might just pass through the capabilities from the IEs
+	 * directly, rather than enforcing this restriction and returning an
+	 * error in this case.
+	 */
+	if (!(params.sta_flags_set & BIT(NL80211_STA_FLAG_WME)))
+		params.ht_capa = NULL;
+
 	switch (dev->ieee80211_ptr->iftype) {
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_AP_VLAN:
-- 
1.9.1

[PATCH 3.4 120/172] IB/mlx4: Saturate RoCE port PMA counters in case of overflow

[lizf]

From: Majd Dibbiny <majd@mellanox.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 61a3855bb726cbb062ef02a31a832dea455456e0 upstream.

For RoCE ports, we set the u32 PMA values based on u64 HCA counters. In case of
overflow, according to the IB spec, we have to saturate a counter to its
max value, do that.

Fixes: c37791349cc7 ('IB/mlx4: Support PMA counters for IBoE')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[lizf: Backported to 3.4:
 - adjust context
 - open-code U32_MAX]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/infiniband/hw/mlx4/mad.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c
index 259b067..df76538 100644
--- a/drivers/infiniband/hw/mlx4/mad.c
+++ b/drivers/infiniband/hw/mlx4/mad.c
@@ -44,6 +44,14 @@ enum {
 	MLX4_IB_VENDOR_CLASS2 = 0xa
 };
 
+/* Counters should be saturate once they reach their maximum value */
+#define ASSIGN_32BIT_COUNTER(counter, value) do {\
+	if ((value) > (u32)~0U)			 \
+		counter = cpu_to_be32((u32)~0U); \
+	else					 \
+		counter = cpu_to_be32(value);	 \
+} while (0)
+
 int mlx4_MAD_IFC(struct mlx4_ib_dev *dev, int ignore_mkey, int ignore_bkey,
 		 int port, struct ib_wc *in_wc, struct ib_grh *in_grh,
 		 void *in_mad, void *response_mad)
@@ -304,10 +312,14 @@ static int ib_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
 static void edit_counter(struct mlx4_counter *cnt,
 					struct ib_pma_portcounters *pma_cnt)
 {
-	pma_cnt->port_xmit_data = cpu_to_be32((be64_to_cpu(cnt->tx_bytes)>>2));
-	pma_cnt->port_rcv_data  = cpu_to_be32((be64_to_cpu(cnt->rx_bytes)>>2));
-	pma_cnt->port_xmit_packets = cpu_to_be32(be64_to_cpu(cnt->tx_frames));
-	pma_cnt->port_rcv_packets  = cpu_to_be32(be64_to_cpu(cnt->rx_frames));
+	ASSIGN_32BIT_COUNTER(pma_cnt->port_xmit_data,
+			     (be64_to_cpu(cnt->tx_bytes) >> 2));
+	ASSIGN_32BIT_COUNTER(pma_cnt->port_rcv_data,
+			     (be64_to_cpu(cnt->rx_bytes) >> 2));
+	ASSIGN_32BIT_COUNTER(pma_cnt->port_xmit_packets,
+			     be64_to_cpu(cnt->tx_frames));
+	ASSIGN_32BIT_COUNTER(pma_cnt->port_rcv_packets,
+			     be64_to_cpu(cnt->rx_frames));
 }
 
 static int iboe_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
-- 
1.9.1

[PATCH 3.4 121/172] tcm_fc: missing curly braces in ft_invl_hw_context()

[lizf]

From: Dan Carpenter <dan.carpenter@oracle.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit d556546e7ecd9fca199df4698943024d40044f8e upstream.

This patch adds a missing set of conditional check braces in
ft_invl_hw_context() originally introduced by commit dcd998ccd
when handling DDP failures in ft_recv_write_data() code.

 commit dcd998ccdbf74a7d8fe0f0a44e85da1ed5975946
 Author: Kiran Patil <kiran.patil@intel.com>
 Date:   Wed Aug 3 09:20:01 2011 +0000

    tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/target/tcm_fc/tfc_io.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c
index dc7c0db..8d5cf53 100644
--- a/drivers/target/tcm_fc/tfc_io.c
+++ b/drivers/target/tcm_fc/tfc_io.c
@@ -330,7 +330,7 @@ void ft_invl_hw_context(struct ft_cmd *cmd)
 		ep = fc_seq_exch(seq);
 		if (ep) {
 			lport = ep->lp;
-			if (lport && (ep->xid <= lport->lro_xid))
+			if (lport && (ep->xid <= lport->lro_xid)) {
 				/*
 				 * "ddp_done" trigger invalidation of HW
 				 * specific DDP context
@@ -345,6 +345,7 @@ void ft_invl_hw_context(struct ft_cmd *cmd)
 				 * identified using ep->xid)
 				 */
 				cmd->was_ddp_setup = 0;
+			}
 		}
 	}
 }
-- 
1.9.1

[PATCH 3.4 122/172] target/pscsi: Fix NULL pointer dereference in get_device_type

[lizf]

From: Nicholas Bellinger <nab@linux-iscsi.org>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 215a8fe4198f607f34ecdbc9969dae783d8b5a61 upstream.

This patch fixes a NULL pointer dereference OOPs with pSCSI backends
within target_core_stat.c code.  The bug is caused by a configfs attr
read if no pscsi_dev_virt->pdv_sd has been configured.

Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/target/target_core_pscsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index d34577d..8082674 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -1165,7 +1165,7 @@ static u32 pscsi_get_device_type(struct se_device *dev)
 	struct pscsi_dev_virt *pdv = dev->dev_ptr;
 	struct scsi_device *sd = pdv->pdv_sd;
 
-	return sd->type;
+	return (sd) ? sd->type : TYPE_NO_LUN;
 }
 
 static sector_t pscsi_get_blocks(struct se_device *dev)
-- 
1.9.1

[PATCH 3.4 123/172] writeback: add missing INITIAL_JIFFIES init in global_update_bandwidth()

[lizf]

From: Tejun Heo <tj@kernel.org>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 7d70e15480c0450d2bfafaad338a32e884fc215e upstream.

global_update_bandwidth() uses static variable update_time as the
timestamp for the last update but forgets to initialize it to
INITIALIZE_JIFFIES.

This means that global_dirty_limit will be 5 mins into the future on
32bit and some large amount jiffies into the past on 64bit.  This
isn't critical as the only effect is that global_dirty_limit won't be
updated for the first 5 mins after booting on 32bit machines,
especially given the auxiliary nature of global_dirty_limit's role -
protecting against global dirty threshold's sudden dips; however, it
does lead to unintended suboptimal behavior.  Fix it.

Fixes: c42843f2f0bb ("writeback: introduce smoothed global dirty limit")
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 mm/page-writeback.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 057884c..b747dcd 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -831,7 +831,7 @@ static void global_update_bandwidth(unsigned long thresh,
 				    unsigned long now)
 {
 	static DEFINE_SPINLOCK(dirty_lock);
-	static unsigned long update_time;
+	static unsigned long update_time = INITIAL_JIFFIES;
 
 	/*
 	 * check locklessly first to optimize away locking for the most time
-- 
1.9.1

[PATCH 3.4 124/172] nbd: fix possible memory leak

[lizf]

From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit ff6b8090e26ef7649ef0cc6b42389141ef48b0cf upstream.

we have already allocated memory for nbd_dev, but we were not
releasing that memory and just returning the error value.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Paul Clements <Paul.Clements@SteelEye.com>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/block/nbd.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 35fc569..eac3705 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -773,10 +773,6 @@ static int __init nbd_init(void)
 		return -EINVAL;
 	}
 
-	nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
-	if (!nbd_dev)
-		return -ENOMEM;
-
 	part_shift = 0;
 	if (max_part > 0) {
 		part_shift = fls(max_part);
@@ -798,6 +794,10 @@ static int __init nbd_init(void)
 	if (nbds_max > 1UL << (MINORBITS - part_shift))
 		return -EINVAL;
 
+	nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
+	if (!nbd_dev)
+		return -ENOMEM;
+
 	for (i = 0; i < nbds_max; i++) {
 		struct gendisk *disk = alloc_disk(1 << part_shift);
 		if (!disk)
-- 
1.9.1

[PATCH 3.4 125/172] net: ethernet: pcnet32: Setup the SRAM and NOUFLO on Am79C97{3, 5}

[lizf]

From: Markos Chandras <markos.chandras@imgtec.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 87f966d97b89774162df04d2106c6350c8fe4cb3 upstream.

On a MIPS Malta board, tons of fifo underflow errors have been observed
when using u-boot as bootloader instead of YAMON. The reason for that
is that YAMON used to set the pcnet device to SRAM mode but u-boot does
not. As a result, the default Tx threshold (64 bytes) is now too small to
keep the fifo relatively used and it can result to Tx fifo underflow errors.
As a result of which, it's best to setup the SRAM on supported controllers
so we can always use the NOUFLO bit.

Cc: <netdev@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Cc: Don Fry <pcnet32@frontier.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/net/ethernet/amd/pcnet32.c | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/amd/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c
index 86b6d8e..d63b322 100644
--- a/drivers/net/ethernet/amd/pcnet32.c
+++ b/drivers/net/ethernet/amd/pcnet32.c
@@ -1526,7 +1526,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 {
 	struct pcnet32_private *lp;
 	int i, media;
-	int fdx, mii, fset, dxsuflo;
+	int fdx, mii, fset, dxsuflo, sram;
 	int chip_version;
 	char *chipname;
 	struct net_device *dev;
@@ -1563,7 +1563,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 	}
 
 	/* initialize variables */
-	fdx = mii = fset = dxsuflo = 0;
+	fdx = mii = fset = dxsuflo = sram = 0;
 	chip_version = (chip_version >> 12) & 0xffff;
 
 	switch (chip_version) {
@@ -1596,6 +1596,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		chipname = "PCnet/FAST III 79C973";	/* PCI */
 		fdx = 1;
 		mii = 1;
+		sram = 1;
 		break;
 	case 0x2626:
 		chipname = "PCnet/Home 79C978";	/* PCI */
@@ -1619,6 +1620,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		chipname = "PCnet/FAST III 79C975";	/* PCI */
 		fdx = 1;
 		mii = 1;
+		sram = 1;
 		break;
 	case 0x2628:
 		chipname = "PCnet/PRO 79C976";
@@ -1647,6 +1649,31 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		dxsuflo = 1;
 	}
 
+	/*
+	 * The Am79C973/Am79C975 controllers come with 12K of SRAM
+	 * which we can use for the Tx/Rx buffers but most importantly,
+	 * the use of SRAM allow us to use the BCR18:NOUFLO bit to avoid
+	 * Tx fifo underflows.
+	 */
+	if (sram) {
+		/*
+		 * The SRAM is being configured in two steps. First we
+		 * set the SRAM size in the BCR25:SRAM_SIZE bits. According
+		 * to the datasheet, each bit corresponds to a 512-byte
+		 * page so we can have at most 24 pages. The SRAM_SIZE
+		 * holds the value of the upper 8 bits of the 16-bit SRAM size.
+		 * The low 8-bits start at 0x00 and end at 0xff. So the
+		 * address range is from 0x0000 up to 0x17ff. Therefore,
+		 * the SRAM_SIZE is set to 0x17. The next step is to set
+		 * the BCR26:SRAM_BND midway through so the Tx and Rx
+		 * buffers can share the SRAM equally.
+		 */
+		a->write_bcr(ioaddr, 25, 0x17);
+		a->write_bcr(ioaddr, 26, 0xc);
+		/* And finally enable the NOUFLO bit */
+		a->write_bcr(ioaddr, 18, a->read_bcr(ioaddr, 18) | (1 << 11));
+	}
+
 	dev = alloc_etherdev(sizeof(*lp));
 	if (!dev) {
 		ret = -ENOMEM;
-- 
1.9.1

[PATCH 3.4 126/172] perf: Fix irq_work 'tail' recursion

[lizf]

From: Peter Zijlstra <peterz@infradead.org>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit d525211f9d1be8b523ec7633f080f2116f5ea536 upstream.

Vince reported a watchdog lockup like:

	[<ffffffff8115e114>] perf_tp_event+0xc4/0x210
	[<ffffffff810b4f8a>] perf_trace_lock+0x12a/0x160
	[<ffffffff810b7f10>] lock_release+0x130/0x260
	[<ffffffff816c7474>] _raw_spin_unlock_irqrestore+0x24/0x40
	[<ffffffff8107bb4d>] do_send_sig_info+0x5d/0x80
	[<ffffffff811f69df>] send_sigio_to_task+0x12f/0x1a0
	[<ffffffff811f71ce>] send_sigio+0xae/0x100
	[<ffffffff811f72b7>] kill_fasync+0x97/0xf0
	[<ffffffff8115d0b4>] perf_event_wakeup+0xd4/0xf0
	[<ffffffff8115d103>] perf_pending_event+0x33/0x60
	[<ffffffff8114e3fc>] irq_work_run_list+0x4c/0x80
	[<ffffffff8114e448>] irq_work_run+0x18/0x40
	[<ffffffff810196af>] smp_trace_irq_work_interrupt+0x3f/0xc0
	[<ffffffff816c99bd>] trace_irq_work_interrupt+0x6d/0x80

Which is caused by an irq_work generating new irq_work and therefore
not allowing forward progress.

This happens because processing the perf irq_work triggers another
perf event (tracepoint stuff) which in turn generates an irq_work ad
infinitum.

Avoid this by raising the recursion counter in the irq_work -- which
effectively disables all software events (including tracepoints) from
actually triggering again.

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20150219170311.GH21418@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 kernel/events/core.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index 0466297..461b6e0 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -3877,6 +3877,13 @@ static void perf_pending_event(struct irq_work *entry)
 {
 	struct perf_event *event = container_of(entry,
 			struct perf_event, pending);
+	int rctx;
+
+	rctx = perf_swevent_get_recursion_context();
+	/*
+	 * If we 'fail' here, that's OK, it means recursion is already disabled
+	 * and we won't recurse 'further'.
+	 */
 
 	if (event->pending_disable) {
 		event->pending_disable = 0;
@@ -3887,6 +3894,9 @@ static void perf_pending_event(struct irq_work *entry)
 		event->pending_wakeup = 0;
 		perf_event_wakeup(event);
 	}
+
+	if (rctx >= 0)
+		perf_swevent_put_recursion_context(rctx);
 }
 
 /*
-- 
1.9.1

[PATCH 3.4 127/172] sched: Fix RLIMIT_RTTIME when PI-boosting to RT

[lizf]

From: Brian Silverman <brian@peloton-tech.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 746db9443ea57fd9c059f62c4bfbf41cf224fe13 upstream.

When non-realtime tasks get priority-inheritance boosted to a realtime
scheduling class, RLIMIT_RTTIME starts to apply to them. However, the
counter used for checking this (the same one used for SCHED_RR
timeslices) was not getting reset. This meant that tasks running with a
non-realtime scheduling class which are repeatedly boosted to a realtime
one, but never block while they are running realtime, eventually hit the
timeout without ever running for a time over the limit. This patch
resets the realtime timeslice counter when un-PI-boosting from an RT to
a non-RT scheduling class.

I have some test code with two threads and a shared PTHREAD_PRIO_INHERIT
mutex which induces priority boosting and spins while boosted that gets
killed by a SIGXCPU on non-fixed kernels but doesn't with this patch
applied. It happens much faster with a CONFIG_PREEMPT_RT kernel, and
does happen eventually with PREEMPT_VOLUNTARY kernels.

Signed-off-by: Brian Silverman <brian@peloton-tech.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: austin@peloton-tech.com
Link: http://lkml.kernel.org/r/1424305436-6716-1-git-send-email-brian@peloton-tech.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[lizf: Backported to 3.4: adjust contest]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 kernel/sched/core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 5701cb9..2f8363e 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -4031,10 +4031,13 @@ void rt_mutex_setprio(struct task_struct *p, int prio)
 	if (running)
 		p->sched_class->put_prev_task(rq, p);
 
-	if (rt_prio(prio))
+	if (rt_prio(prio)) {
 		p->sched_class = &rt_sched_class;
-	else
+	} else {
+		if (rt_prio(oldprio))
+			p->rt.timeout = 0;
 		p->sched_class = &fair_sched_class;
+	}
 
 	p->prio = prio;
 
-- 
1.9.1

[PATCH 3.4 128/172] writeback: fix possible underflow in write bandwidth calculation

[lizf]

From: Tejun Heo <tj@kernel.org>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit c72efb658f7c8b27ca3d0efb5cfd5ded9fcac89e upstream.

>From 1ebf33901ecc75d9496862dceb1ef0377980587c Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 23 Mar 2015 00:08:19 -0400

2f800fbd777b ("writeback: fix dirtied pages accounting on redirty")
introduced account_page_redirty() which reverts stat updates for a
redirtied page, making BDI_DIRTIED no longer monotonically increasing.

bdi_update_write_bandwidth() uses the delta in BDI_DIRTIED as the
basis for bandwidth calculation.  While unlikely, since the above
patch, the newer value may be lower than the recorded past value and
underflow the bandwidth calculation leading to a wild result.

Fix it by subtracing min of the old and new values when calculating
delta.  AFAIK, there hasn't been any report of it happening but the
resulting erratic behavior would be non-critical and temporary, so
it's possible that the issue is happening without being reported.  The
risk of the fix is very low, so tagged for -stable.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Fixes: 2f800fbd777b ("writeback: fix dirtied pages accounting on redirty")
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 mm/page-writeback.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index b747dcd..25aaa31 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -766,8 +766,11 @@ static void bdi_update_write_bandwidth(struct backing_dev_info *bdi,
 	 *                   bw * elapsed + write_bandwidth * (period - elapsed)
 	 * write_bandwidth = ---------------------------------------------------
 	 *                                          period
+	 *
+	 * @written may have decreased due to account_page_redirty().
+	 * Avoid underflowing @bw calculation.
 	 */
-	bw = written - bdi->written_stamp;
+	bw = written - min(written, bdi->written_stamp);
 	bw *= HZ;
 	if (unlikely(elapsed > period)) {
 		do_div(bw, elapsed);
-- 
1.9.1

[PATCH 3.4 129/172] selinux: fix sel_write_enforce broken return value

[lizf]

From: Joe Perches <joe@perches.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 6436a123a147db51a0b06024a8350f4c230e73ff upstream.

Return a negative error value like the rest of the entries in this function.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
[PM: tweaked subject line]
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 security/selinux/selinuxfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index 0a9891e..3bf9045 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -150,7 +150,7 @@ static ssize_t sel_write_enforce(struct file *file, const char __user *buf,
 		goto out;
 
 	/* No partial writes. */
-	length = EINVAL;
+	length = -EINVAL;
 	if (*ppos != 0)
 		goto out;
 
-- 
1.9.1

[PATCH 3.4 130/172] hfsplus: fix B-tree corruption after insertion at position 0

[lizf]

From: Sergei Antonov <saproj@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 98cf21c61a7f5419d82f847c4d77bf6e96a76f5f upstream.

Fix B-tree corruption when a new record is inserted at position 0 in the
node in hfs_brec_insert().  In this case a hfs_brec_update_parent() is
called to update the parent index node (if exists) and it is passed
hfs_find_data with a search_key containing a newly inserted key instead
of the key to be updated.  This results in an inconsistent index node.
The bug reproduces on my machine after an extents overflow record for
the catalog file (CNID=4) is inserted into the extents overflow B-tree.
Because of a low (reserved) value of CNID=4, it has to become the first
record in the first leaf node.

The resulting first leaf node is correct:

  ----------------------------------------------------
  | key0.CNID=4 | key1.CNID=123 | key2.CNID=456, ... |
  ----------------------------------------------------

But the parent index key0 still contains the previous key CNID=123:

  -----------------------
  | key0.CNID=123 | ... |
  -----------------------

A change in hfs_brec_insert() makes hfs_brec_update_parent() work
correctly by preventing it from getting fd->record=-1 value from
__hfs_brec_find().

Along the way, I removed duplicate code with unification of the if
condition.  The resulting code is equivalent to the original code
because node is never 0.

Also hfs_brec_update_parent() will now return an error after getting a
negative fd->record value.  However, the return value of
hfs_brec_update_parent() is not checked anywhere in the file and I'm
leaving it unchanged by this patch.  brec.c lacks error checking after
some other calls too, but this issue is of less importance than the one
being fixed by this patch.

Signed-off-by: Sergei Antonov <saproj@gmail.com>
Cc: Joe Perches <joe@perches.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Cc: Anton Altaparmakov <aia21@cam.ac.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/hfsplus/brec.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/fs/hfsplus/brec.c b/fs/hfsplus/brec.c
index 2a734cf..7429c40 100644
--- a/fs/hfsplus/brec.c
+++ b/fs/hfsplus/brec.c
@@ -130,13 +130,16 @@ skip:
 	hfs_bnode_write(node, entry, data_off + key_len, entry_len);
 	hfs_bnode_dump(node);
 
-	if (new_node) {
-		/* update parent key if we inserted a key
-		 * at the start of the first node
-		 */
-		if (!rec && new_node != node)
-			hfs_brec_update_parent(fd);
+	/*
+	 * update parent key if we inserted a key
+	 * at the start of the node and it is not the new node
+	 */
+	if (!rec && new_node != node) {
+		hfs_bnode_read_key(node, fd->search_key, data_off + size);
+		hfs_brec_update_parent(fd);
+	}
 
+	if (new_node) {
 		hfs_bnode_put(fd->bnode);
 		if (!new_node->parent) {
 			hfs_btree_inc_height(tree);
@@ -166,9 +169,6 @@ skip:
 		goto again;
 	}
 
-	if (!rec)
-		hfs_brec_update_parent(fd);
-
 	return 0;
 }
 
@@ -368,6 +368,8 @@ again:
 	if (IS_ERR(parent))
 		return PTR_ERR(parent);
 	__hfs_brec_find(parent, fd);
+	if (fd->record < 0)
+		return -ENOENT;
 	hfs_bnode_dump(parent);
 	rec = fd->record;
 
-- 
1.9.1

[PATCH 3.4 131/172] ALSA: hda - Add one more node in the EAPD supporting candidate list

[lizf]

From: Hui Wang <hui.wang@canonical.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit af95b41426e0b58279f8ff0ebe420df49a4e96b8 upstream.

We have a HP machine which use the codec node 0x17 connecting the
internal speaker, and from the node capability, we saw the EAPD,
if we don't set the EAPD on for this node, the internal speaker
can't output any sound.

BugLink: https://bugs.launchpad.net/bugs/1436745
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/pci/hda/patch_realtek.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 9461a00..b16a37f 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -759,7 +759,7 @@ static void alc_auto_setup_eapd(struct hda_codec *codec, bool on)
 {
 	/* We currently only handle front, HP */
 	static hda_nid_t pins[] = {
-		0x0f, 0x10, 0x14, 0x15, 0
+		0x0f, 0x10, 0x14, 0x15, 0x17, 0
 	};
 	hda_nid_t *p;
 	for (p = pins; *p; p++)
-- 
1.9.1

[PATCH 3.4 132/172] USB: ftdi_sio: Added custom PID for Synapse Wireless product

[lizf]

From: Doug Goldstein <cardoe@cardoe.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 4899c054a90439477b24da8977db8d738376fe90 upstream.

Synapse Wireless uses the FTDI VID with a custom PID of 0x9090 for their
SNAP Stick 200 product.

Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/serial/ftdi_sio.c     | 1 +
 drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
 2 files changed, 7 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 13420bc..97392ec 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -628,6 +628,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) },
 	/*
 	 * ELV devices:
 	 */
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 261875e..105b982 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -561,6 +561,12 @@
  */
 #define FTDI_NT_ORIONLXM_PID	0x7c90	/* OrionLXm Substation Automation Platform */
 
+/*
+ * Synapse Wireless product ids (FTDI_VID)
+ * http://www.synapse-wireless.com
+ */
+#define FTDI_SYNAPSE_SS200_PID 0x9090 /* SS200 - SNAP Stick 200 */
+
 
 /********************************/
 /** third-party VID/PID combos **/
-- 
1.9.1

[PATCH 3.4 133/172] cifs: fix use-after-free bug in find_writable_file

[lizf]

From: David Disseldorp <ddiss@suse.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit e1e9bda22d7ddf88515e8fe401887e313922823e upstream.

Under intermittent network outages, find_writable_file() is susceptible
to the following race condition, which results in a user-after-free in
the cifs_writepages code-path:

Thread 1                                        Thread 2
========                                        ========

inv_file = NULL
refind = 0
spin_lock(&cifs_file_list_lock)

// invalidHandle found on openFileList

inv_file = open_file
// inv_file->count currently 1

cifsFileInfo_get(inv_file)
// inv_file->count = 2

spin_unlock(&cifs_file_list_lock);

cifs_reopen_file()                            cifs_close()
// fails (rc != 0)                            ->cifsFileInfo_put()
                                       spin_lock(&cifs_file_list_lock)
                                       // inv_file->count = 1
                                       spin_unlock(&cifs_file_list_lock)

spin_lock(&cifs_file_list_lock);
list_move_tail(&inv_file->flist,
      &cifs_inode->openFileList);
spin_unlock(&cifs_file_list_lock);

cifsFileInfo_put(inv_file);
->spin_lock(&cifs_file_list_lock)

  // inv_file->count = 0
  list_del(&cifs_file->flist);
  // cleanup!!
  kfree(cifs_file);

  spin_unlock(&cifs_file_list_lock);

spin_lock(&cifs_file_list_lock);
++refind;
// refind = 1
goto refind_writable;

At this point we loop back through with an invalid inv_file pointer
and a refind value of 1. On second pass, inv_file is not overwritten on
openFileList traversal, and is subsequently dereferenced.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/cifs/file.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 0898d99..f069765 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1613,6 +1613,7 @@ refind_writable:
 			cifsFileInfo_put(inv_file);
 			spin_lock(&cifs_file_list_lock);
 			++refind;
+			inv_file = NULL;
 			goto refind_writable;
 		}
 	}
-- 
1.9.1

[PATCH 3.4 134/172] usb: xhci: handle Config Error Change (CEC) in xhci driver

[lizf]

From: Lu Baolu <baolu.lu@linux.intel.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 9425183d177aa4a2f09d01a74925124f0778b595 upstream.

Linux xHCI driver doesn't report and handle port cofig error change.
If Port Configure Error for root hub port occurs, CEC bit in PORTSC
would be set by xHC and remains 1. This happends when the root port
fails to configure its link partner, e.g. the port fails to exchange
port capabilities information using Port Capability LMPs.

Then the Port Status Change Events will be blocked until all status
change bits(CEC is one of the change bits) are cleared('0') (refer to
xHCI spec 4.19.2). Otherwise, the port status change event for this
root port will not be generated anymore, then root port would look
like dead for user and can't be recovered until a Host Controller
Reset(HCRST).

This patch is to check CEC bit in PORTSC in xhci_get_port_status()
and set a Config Error in the return status if CEC is set. This will
cause a ClearPortFeature request, where CEC bit is cleared in
xhci_clear_port_change_bit().

[The commit log is based on initial Marvell patch posted at
http://marc.info/?l=linux-kernel&m=142323612321434&w=2]

Reported-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[lizf: Backported to 3.4:
 - adjust indentation
 - s/raw_port_status/temp/]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/host/xhci-hub.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 56ec28b..a6d4393 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -383,6 +383,10 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
 		status = PORT_PLC;
 		port_change_bit = "link state";
 		break;
+	case USB_PORT_FEAT_C_PORT_CONFIG_ERROR:
+		status = PORT_CEC;
+		port_change_bit = "config error";
+		break;
 	default:
 		/* Should never happen */
 		return;
@@ -617,6 +621,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				status |= USB_PORT_STAT_C_LINK_STATE << 16;
 			if ((temp & PORT_WRC))
 				status |= USB_PORT_STAT_C_BH_RESET << 16;
+			if ((temp & PORT_CEC))
+				status |= USB_PORT_STAT_C_CONFIG_ERROR << 16;
 		}
 
 		if (hcd->speed != HCD_USB3) {
@@ -904,6 +910,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		case USB_PORT_FEAT_C_OVER_CURRENT:
 		case USB_PORT_FEAT_C_ENABLE:
 		case USB_PORT_FEAT_C_PORT_LINK_STATE:
+		case USB_PORT_FEAT_C_PORT_CONFIG_ERROR:
 			xhci_clear_port_change_bit(xhci, wValue, wIndex,
 					port_array[wIndex], temp);
 			break;
@@ -957,7 +964,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 	 */
 	status = bus_state->resuming_ports;
 
-	mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC;
+	mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC;
 
 	spin_lock_irqsave(&xhci->lock, flags);
 	/* For each port, did anything change?  If so, set that bit in buf. */
-- 
1.9.1

[PATCH 3.4 135/172] usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers

[lizf]

From: Lu Baolu <baolu.lu@linux.intel.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 227a4fd801c8a9fa2c4700ab98ec1aec06e3b44d upstream.

When a device with an isochronous endpoint is plugged into the Intel
xHCI host controller, and the driver submits multiple frames per URB,
the xHCI driver will set the Block Event Interrupt (BEI) flag on all
but the last TD for the URB. This causes the host controller to place
an event on the event ring, but not send an interrupt. When the last
TD for the URB completes, BEI is cleared, and we get an interrupt for
the whole URB.

However, under Intel xHCI host controllers, if the event ring is full
of events from transfers with BEI set,  an "Event Ring is Full" event
will be posted to the last entry of the event ring,  but no interrupt
is generated. Host will cease all transfer and command executions and
wait until software completes handling the pending events in the event
ring.  That means xHC stops, but event of "event ring is full" is not
notified. As the result, the xHC looks like dead to user.

This patch is to apply XHCI_AVOID_BEI quirk to Intel xHC devices. And
it should be backported to kernels as old as 3.0, that contains the
commit 69e848c2090a ("Intel xhci: Support EHCI/xHCI port switching.").

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alistair Grant <akgrant0710@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/host/xhci-pci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 037185d..710b2e9 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -105,6 +105,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	if (pdev->vendor == PCI_VENDOR_ID_AMD)
 		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+		xhci->quirks |= XHCI_AVOID_BEI;
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 			pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
 		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
@@ -119,7 +121,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		 * PPT chipsets.
 		 */
 		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
-		xhci->quirks |= XHCI_AVOID_BEI;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 		(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
-- 
1.9.1

[PATCH 3.4 136/172] net: use for_each_netdev_safe() in rtnl_group_changelink()

[lizf]

From: WANG Cong <xiyou.wangcong@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit d079535d5e1bf5e2e7c856bae2483414ea21e137 upstream.

In case we move the whole dev group to another netns,
we should call for_each_netdev_safe(), otherwise we get
a soft lockup:

 NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ip:798]
 irq event stamp: 255424
 hardirqs last  enabled at (255423): [<ffffffff81a2aa95>] restore_args+0x0/0x30
 hardirqs last disabled at (255424): [<ffffffff81a2ad5a>] apic_timer_interrupt+0x6a/0x80
 softirqs last  enabled at (255422): [<ffffffff81079ebc>] __do_softirq+0x2c1/0x3a9
 softirqs last disabled at (255417): [<ffffffff8107a190>] irq_exit+0x41/0x95
 CPU: 0 PID: 798 Comm: ip Not tainted 4.0.0-rc4+ #881
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 task: ffff8800d1b88000 ti: ffff880119530000 task.ti: ffff880119530000
 RIP: 0010:[<ffffffff810cad11>]  [<ffffffff810cad11>] debug_lockdep_rcu_enabled+0x28/0x30
 RSP: 0018:ffff880119533778  EFLAGS: 00000246
 RAX: ffff8800d1b88000 RBX: 0000000000000002 RCX: 0000000000000038
 RDX: 0000000000000000 RSI: ffff8800d1b888c8 RDI: ffff8800d1b888c8
 RBP: ffff880119533778 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 000000000000b5c2 R12: 0000000000000246
 R13: ffff880119533708 R14: 00000000001d5a40 R15: ffff88011a7d5a40
 FS:  00007fc01315f740(0000) GS:ffff88011a600000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 00007f367a120988 CR3: 000000011849c000 CR4: 00000000000007f0
 Stack:
  ffff880119533798 ffffffff811ac868 ffffffff811ac831 ffffffff811ac828
  ffff8801195337c8 ffffffff811ac8c9 ffff8801195339b0 ffff8801197633e0
  0000000000000000 ffff8801195339b0 ffff8801195337d8 ffffffff811ad2d7
 Call Trace:
  [<ffffffff811ac868>] rcu_read_lock+0x37/0x6e
  [<ffffffff811ac831>] ? rcu_read_unlock+0x5f/0x5f
  [<ffffffff811ac828>] ? rcu_read_unlock+0x56/0x5f
  [<ffffffff811ac8c9>] __fget+0x2a/0x7a
  [<ffffffff811ad2d7>] fget+0x13/0x15
  [<ffffffff811be732>] proc_ns_fget+0xe/0x38
  [<ffffffff817c7714>] get_net_ns_by_fd+0x11/0x59
  [<ffffffff817df359>] rtnl_link_get_net+0x33/0x3e
  [<ffffffff817df3d7>] do_setlink+0x73/0x87b
  [<ffffffff810b28ce>] ? trace_hardirqs_off+0xd/0xf
  [<ffffffff81a2aa95>] ? retint_restore_args+0xe/0xe
  [<ffffffff817e0301>] rtnl_newlink+0x40c/0x699
  [<ffffffff817dffe0>] ? rtnl_newlink+0xeb/0x699
  [<ffffffff81a29246>] ? _raw_spin_unlock+0x28/0x33
  [<ffffffff8143ed1e>] ? security_capable+0x18/0x1a
  [<ffffffff8107da51>] ? ns_capable+0x4d/0x65
  [<ffffffff817de5ce>] rtnetlink_rcv_msg+0x181/0x194
  [<ffffffff817de407>] ? rtnl_lock+0x17/0x19
  [<ffffffff817de407>] ? rtnl_lock+0x17/0x19
  [<ffffffff817de44d>] ? __rtnl_unlock+0x17/0x17
  [<ffffffff818327c6>] netlink_rcv_skb+0x4d/0x93
  [<ffffffff817de42f>] rtnetlink_rcv+0x26/0x2d
  [<ffffffff81830f18>] netlink_unicast+0xcb/0x150
  [<ffffffff8183198e>] netlink_sendmsg+0x501/0x523
  [<ffffffff8115cba9>] ? might_fault+0x59/0xa9
  [<ffffffff817b5398>] ? copy_from_user+0x2a/0x2c
  [<ffffffff817b7b74>] sock_sendmsg+0x34/0x3c
  [<ffffffff817b7f6d>] ___sys_sendmsg+0x1b8/0x255
  [<ffffffff8115c5eb>] ? handle_pte_fault+0xbd5/0xd4a
  [<ffffffff8100a2b0>] ? native_sched_clock+0x35/0x37
  [<ffffffff8109e94b>] ? sched_clock_local+0x12/0x72
  [<ffffffff8109eb9c>] ? sched_clock_cpu+0x9e/0xb7
  [<ffffffff810cadbf>] ? rcu_read_lock_held+0x3b/0x3d
  [<ffffffff811ac1d8>] ? __fcheck_files+0x4c/0x58
  [<ffffffff811ac946>] ? __fget_light+0x2d/0x52
  [<ffffffff817b8adc>] __sys_sendmsg+0x42/0x60
  [<ffffffff817b8b0c>] SyS_sendmsg+0x12/0x1c
  [<ffffffff81a29e32>] system_call_fastpath+0x12/0x17

Fixes: e7ed828f10bd8 ("netlink: support setting devgroup parameters")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/core/rtnetlink.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 42c2596..43c6dd8 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1694,10 +1694,10 @@ static int rtnl_group_changelink(struct net *net, int group,
 		struct ifinfomsg *ifm,
 		struct nlattr **tb)
 {
-	struct net_device *dev;
+	struct net_device *dev, *aux;
 	int err;
 
-	for_each_netdev(net, dev) {
+	for_each_netdev_safe(net, dev, aux) {
 		if (dev->group == group) {
 			err = do_setlink(dev, ifm, tb, NULL, 0);
 			if (err < 0)
-- 
1.9.1

[PATCH 3.4 137/172] USB: ftdi_sio: Use jtag quirk for SNAP Connect E10

[lizf]

From: Doug Goldstein <cardoe@cardoe.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit b229a0f840f774d29d8fedbf5deb344ca36b7f1a upstream.

This patch uses the existing CALAO Systems ftdi_8u2232c_probe in order
to avoid attaching a TTY to the JTAG port as this board is based on the
CALAO Systems reference design and needs the same fix up.

Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
[johan: clean up probe logic ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/serial/ftdi_sio.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 97392ec..06abee6 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1950,8 +1950,12 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
 
 	dbg("%s", __func__);
 
-	if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
-	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100V2")))
+	if (udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems"))
+		return ftdi_jtag_probe(serial);
+
+	if (udev->product &&
+		(!strcmp(udev->product, "BeagleBone/XDS100V2") ||
+		 !strcmp(udev->product, "SNAP Connect E10")))
 		return ftdi_jtag_probe(serial);
 
 	return 0;
-- 
1.9.1

[PATCH 3.4 138/172] radeon: Do not directly dereference pointers to BIOS area.

[lizf]

From: David Miller <davem@davemloft.net>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit f2c9e560b406f2f6b14b345c7da33467dee9cdf2 upstream.

Use readb() and memcpy_fromio() accessors instead.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/gpu/drm/radeon/radeon_bios.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index d306cc8..ef56e4e 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -76,7 +76,7 @@ static bool igp_read_bios_from_vram(struct radeon_device *rdev)
 
 static bool radeon_read_bios(struct radeon_device *rdev)
 {
-	uint8_t __iomem *bios;
+	uint8_t __iomem *bios, val1, val2;
 	size_t size;
 
 	rdev->bios = NULL;
@@ -86,15 +86,19 @@ static bool radeon_read_bios(struct radeon_device *rdev)
 		return false;
 	}
 
-	if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) {
+	val1 = readb(&bios[0]);
+	val2 = readb(&bios[1]);
+
+	if (size == 0 || val1 != 0x55 || val2 != 0xaa) {
 		pci_unmap_rom(rdev->pdev, bios);
 		return false;
 	}
-	rdev->bios = kmemdup(bios, size, GFP_KERNEL);
+	rdev->bios = kzalloc(size, GFP_KERNEL);
 	if (rdev->bios == NULL) {
 		pci_unmap_rom(rdev->pdev, bios);
 		return false;
 	}
+	memcpy_fromio(rdev->bios, bios, size);
 	pci_unmap_rom(rdev->pdev, bios);
 	return true;
 }
-- 
1.9.1

[PATCH 3.4 139/172] x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirk

[lizf]

From: Stefan Lippers-Hollmann <s.l-h@gmx.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 80313b3078fcd2ca51970880d90757f05879a193 upstream.

The ASRock Q1900DC-ITX mainboard (Baytrail-D) hangs randomly in
both BIOS and UEFI mode while rebooting unless reboot=pci is
used. Add a quirk to reboot via the pci method.

The problem is very intermittent and hard to debug, it might succeed
rebooting just fine 40 times in a row - but fails half a dozen times
the next day. It seems to be slightly less common in BIOS CSM mode
than native UEFI (with the CSM disabled), but it does happen in either
mode. Since I've started testing this patch in late january, rebooting
has been 100% reliable.

Most of the time it already hangs during POST, but occasionally it
might even make it through the bootloader and the kernel might even
start booting, but then hangs before the mode switch. The same symptoms
occur with grub-efi, gummiboot and grub-pc, just as well as (at least)
kernel 3.16-3.19 and 4.0-rc6 (I haven't tried older kernels than 3.16).
Upgrading to the most current mainboard firmware of the ASRock
Q1900DC-ITX, version 1.20, does not improve the situation.

( Searching the web seems to suggest that other Bay Trail-D mainboards
  might be affected as well. )
--
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/20150330224427.0fb58e42@mir
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/x86/kernel/reboot.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d398f31..0bfcb2f 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -439,6 +439,17 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"),
 		},
 	},
+
+	/* ASRock */
+	{	/* Handle problems with rebooting on ASRock Q1900DC-ITX */
+		.callback = set_pci_reboot,
+		.ident = "ASRock Q1900DC-ITX",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASRock"),
+			DMI_MATCH(DMI_BOARD_NAME, "Q1900DC-ITX"),
+		},
+	},
+
 	{	/* Handle problems with rebooting on the Latitude E6320. */
 		.callback = set_pci_reboot,
 		.ident = "Dell Latitude E6320",
-- 
1.9.1

[PATCH 3.4 140/172] mac80211: fix RX A-MPDU session reorder timer deletion

[lizf]

From: Johannes Berg <johannes.berg@intel.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 788211d81bfdf9b6a547d0530f206ba6ee76b107 upstream.

There's an issue with the way the RX A-MPDU reorder timer is
deleted that can cause a kernel crash like this:

 * tid_rx is removed - call_rcu(ieee80211_free_tid_rx)
 * station is destroyed
 * reorder timer fires before ieee80211_free_tid_rx() runs,
   accessing the station, thus potentially crashing due to
   the use-after-free

The station deletion is protected by synchronize_net(), but
that isn't enough -- ieee80211_free_tid_rx() need not have
run when that returns (it deletes the timer.) We could use
rcu_barrier() instead of synchronize_net(), but that's much
more expensive.

Instead, to fix this, add a field tracking that the session
is being deleted. In this case, the only re-arming of the
timer happens with the reorder spinlock held, so make that
code not rearm it if the session is being deleted and also
delete the timer after setting that field. This ensures the
timer cannot fire after ___ieee80211_stop_rx_ba_session()
returns, which fixes the problem.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/mac80211/agg-rx.c   | 8 ++++++--
 net/mac80211/rx.c       | 7 ++++---
 net/mac80211/sta_info.h | 2 ++
 3 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 64d3ce5..df2b6ac 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -49,8 +49,6 @@ static void ieee80211_free_tid_rx(struct rcu_head *h)
 		container_of(h, struct tid_ampdu_rx, rcu_head);
 	int i;
 
-	del_timer_sync(&tid_rx->reorder_timer);
-
 	for (i = 0; i < tid_rx->buf_size; i++)
 		dev_kfree_skb(tid_rx->reorder_buf[i]);
 	kfree(tid_rx->reorder_buf);
@@ -94,6 +92,12 @@ void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
 
 	del_timer_sync(&tid_rx->session_timer);
 
+	/* make sure ieee80211_sta_reorder_release() doesn't re-arm the timer */
+	spin_lock_bh(&tid_rx->reorder_lock);
+	tid_rx->removed = true;
+	spin_unlock_bh(&tid_rx->reorder_lock);
+	del_timer_sync(&tid_rx->reorder_timer);
+
 	call_rcu(&tid_rx->rcu_head, ieee80211_free_tid_rx);
 }
 
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index dcd632f..6202d05 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -668,9 +668,10 @@ static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw,
 
  set_release_timer:
 
-		mod_timer(&tid_agg_rx->reorder_timer,
-			  tid_agg_rx->reorder_time[j] + 1 +
-			  HT_RX_REORDER_BUF_TIMEOUT);
+		if (!tid_agg_rx->removed)
+			mod_timer(&tid_agg_rx->reorder_timer,
+				  tid_agg_rx->reorder_time[j] + 1 +
+				  HT_RX_REORDER_BUF_TIMEOUT);
 	} else {
 		del_timer(&tid_agg_rx->reorder_timer);
 	}
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 249f4d0..4e6ece8 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -106,6 +106,7 @@ enum ieee80211_sta_info_flags {
  * @buf_size: reorder buffer size at receiver
  * @failed_bar_ssn: ssn of the last failed BAR tx attempt
  * @bar_pending: BAR needs to be re-sent
+ * @removed: this session is removed (but might have been found due to RCU)
  *
  * This structure's lifetime is managed by RCU, assignments to
  * the array holding it must hold the aggregation mutex.
@@ -169,6 +170,7 @@ struct tid_ampdu_rx {
 	u16 buf_size;
 	u16 timeout;
 	u8 dialog_token;
+	bool removed;
 };
 
 /**
-- 
1.9.1

[PATCH 3.4 141/172] IB/uverbs: Prevent integer overflow in ib_umem_get address arithmetic

[lizf]

From: Shachar Raindel <raindel@mellanox.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 8494057ab5e40df590ef6ef7d66324d3ae33356b upstream.

Properly verify that the resulting page aligned end address is larger
than both the start address and the length of the memory area requested.

Both the start and length arguments for ib_umem_get are controlled by
the user. A misbehaving user can provide values which will cause an
integer overflow when calculating the page aligned end address.

This overflow can cause also miscalculation of the number of pages
mapped, and additional logic issues.

Addresses: CVE-2014-8159
Signed-off-by: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/infiniband/core/umem.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index a841123..055ebeb 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -94,6 +94,14 @@ struct ib_umem *ib_umem_get(struct ib_ucontext *context, unsigned long addr,
 	if (dmasync)
 		dma_set_attr(DMA_ATTR_WRITE_BARRIER, &attrs);
 
+	/*
+	 * If the combination of the addr and size requested for this memory
+	 * region causes an integer overflow, return error.
+	 */
+	if ((PAGE_ALIGN(addr + size) <= size) ||
+	    (PAGE_ALIGN(addr + size) <= addr))
+		return ERR_PTR(-EINVAL);
+
 	if (!can_do_mlock())
 		return ERR_PTR(-EPERM);
 
-- 
1.9.1

[PATCH 3.4 142/172] be2iscsi: Fix kernel panic when device initialization fails

[lizf]

From: John Soni Jose <sony.john-n@emulex.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 2e7cee027b26cbe7e6685a7a14bd2850bfe55d33 upstream.

Kernel panic was happening as iscsi_host_remove() was called on
a host which was not yet added.

Signed-off-by: John Soni Jose <sony.john-n@emulex.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/scsi/be2iscsi/be_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index e88da8d..348560a 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -4398,9 +4398,9 @@ free_port:
 hba_free:
 	if (phba->msix_enabled)
 		pci_disable_msix(phba->pcidev);
-	iscsi_host_remove(phba->shost);
 	pci_dev_put(phba->pcidev);
 	iscsi_host_free(phba->shost);
+	pci_set_drvdata(pcidev, NULL);
 disable_pci:
 	pci_disable_device(pcidev);
 	return ret;
-- 
1.9.1

[PATCH 3.4 143/172] Defer processing of REQ_PREEMPT requests for blocked devices

[lizf]

From: Bart Van Assche <bart.vanassche@sandisk.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit bba0bdd7ad4713d82338bcd9b72d57e9335a664b upstream.

SCSI transport drivers and SCSI LLDs block a SCSI device if the
transport layer is not operational. This means that in this state
no requests should be processed, even if the REQ_PREEMPT flag has
been set. This patch avoids that a rescan shortly after a cable
pull sporadically triggers the following kernel oops:

BUG: unable to handle kernel paging request at ffffc9001a6bc084
IP: [<ffffffffa04e08f2>] mlx4_ib_post_send+0xd2/0xb30 [mlx4_ib]
Process rescan-scsi-bus (pid: 9241, threadinfo ffff88053484a000, task ffff880534aae100)
Call Trace:
 [<ffffffffa0718135>] srp_post_send+0x65/0x70 [ib_srp]
 [<ffffffffa071b9df>] srp_queuecommand+0x1cf/0x3e0 [ib_srp]
 [<ffffffffa0001ff1>] scsi_dispatch_cmd+0x101/0x280 [scsi_mod]
 [<ffffffffa0009ad1>] scsi_request_fn+0x411/0x4d0 [scsi_mod]
 [<ffffffff81223b37>] __blk_run_queue+0x27/0x30
 [<ffffffff8122a8d2>] blk_execute_rq_nowait+0x82/0x110
 [<ffffffff8122a9c2>] blk_execute_rq+0x62/0xf0
 [<ffffffffa000b0e8>] scsi_execute+0xe8/0x190 [scsi_mod]
 [<ffffffffa000b2f3>] scsi_execute_req+0xa3/0x130 [scsi_mod]
 [<ffffffffa000c1aa>] scsi_probe_lun+0x17a/0x450 [scsi_mod]
 [<ffffffffa000ce86>] scsi_probe_and_add_lun+0x156/0x480 [scsi_mod]
 [<ffffffffa000dc2f>] __scsi_scan_target+0xdf/0x1f0 [scsi_mod]
 [<ffffffffa000dfa3>] scsi_scan_host_selected+0x183/0x1c0 [scsi_mod]
 [<ffffffffa000edfb>] scsi_scan+0xdb/0xe0 [scsi_mod]
 [<ffffffffa000ee13>] store_scan+0x13/0x20 [scsi_mod]
 [<ffffffff811c8d9b>] sysfs_write_file+0xcb/0x160
 [<ffffffff811589de>] vfs_write+0xce/0x140
 [<ffffffff81158b53>] sys_write+0x53/0xa0
 [<ffffffff81464592>] system_call_fastpath+0x16/0x1b
 [<00007f611c9d9300>] 0x7f611c9d92ff

Reported-by: Max Gurtuvoy <maxg@mellanox.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/scsi/scsi_lib.c   | 4 +++-
 include/linux/blk_types.h | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index ac99b46..a30f7a0 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1209,9 +1209,11 @@ int scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
 				    "rejecting I/O to dead device\n");
 			ret = BLKPREP_KILL;
 			break;
-		case SDEV_QUIESCE:
 		case SDEV_BLOCK:
 		case SDEV_CREATED_BLOCK:
+			ret = BLKPREP_DEFER;
+			break;
+		case SDEV_QUIESCE:
 			/*
 			 * If the devices is blocked we defer normal commands.
 			 */
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 4053cbd..ddce23d 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -144,7 +144,9 @@ enum rq_flag_bits {
 	__REQ_ELVPRIV,		/* elevator private data attached */
 	__REQ_FAILED,		/* set if the request failed */
 	__REQ_QUIET,		/* don't worry about errors */
-	__REQ_PREEMPT,		/* set for "ide_preempt" requests */
+	__REQ_PREEMPT,		/* set for "ide_preempt" requests and also
+				   for requests for which the SCSI "quiesce"
+				   state must be ignored. */
 	__REQ_ALLOCED,		/* request came from our alloc pool */
 	__REQ_COPY_USER,	/* contains copies of user pages */
 	__REQ_FLUSH_SEQ,	/* request for flush sequence */
-- 
1.9.1

[PATCH 3.4 144/172] ocfs2: _really_ sync the right range

[lizf]

From: Al Viro <viro@zeniv.linux.org.uk>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 64b4e2526d1cf6e6a4db6213d6e2b6e6ab59479a upstream.

"ocfs2 syncs the wrong range" had been broken; prior to it the
code was doing the wrong thing in case of O_APPEND, all right,
but _after_ it we were syncing the wrong range in 100% cases.
*ppos, aka iocb->ki_pos is incremented prior to that point,
so we are always doing sync on the area _after_ the one we'd
written to.

Spotted by Joseph Qi <joseph.qi@huawei.com> back in January;
unfortunately, I'd missed his mail back then ;-/

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/ocfs2/file.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 8021098..bc44ea5 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -2387,10 +2387,14 @@ out_dio:
 	/* buffered aio wouldn't have proper lock coverage today */
 	BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT));
 
+	if (unlikely(written <= 0))
+		goto no_sync;
+
 	if (((file->f_flags & O_DSYNC) && !direct_io) || IS_SYNC(inode) ||
 	    ((file->f_flags & O_DIRECT) && !direct_io)) {
-		ret = filemap_fdatawrite_range(file->f_mapping, *ppos,
-					       *ppos + count - 1);
+		ret = filemap_fdatawrite_range(file->f_mapping,
+					       iocb->ki_pos - written,
+					       iocb->ki_pos - 1);
 		if (ret < 0)
 			written = ret;
 
@@ -2403,10 +2407,12 @@ out_dio:
 		}
 
 		if (!ret)
-			ret = filemap_fdatawait_range(file->f_mapping, *ppos,
-						      *ppos + count - 1);
+			ret = filemap_fdatawait_range(file->f_mapping,
+						      iocb->ki_pos - written,
+						      iocb->ki_pos - 1);
 	}
 
+no_sync:
 	/*
 	 * deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io
 	 * function pointer which is called when o_direct io completes so that
-- 
1.9.1

[PATCH 3.4 145/172] ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support

[lizf]

From: "Dmitry M. Fedin" <dmitry.fedin@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 3dc8523fa7412e731441c01fb33f003eb3cfece1 upstream.

Adds an entry for Creative USB X-Fi to the rc_config array in
mixer_quirks.c to allow use of volume knob on the device.
Adds support for newer X-Fi Pro card, known as "Model No. SB1095"
with USB ID "041e:3237"

Signed-off-by: Dmitry M. Fedin <dmitry.fedin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 sound/usb/mixer_quirks.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index fb95069..040d101 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -64,6 +64,7 @@ static const struct rc_config {
 	{ USB_ID(0x041e, 0x3040), 2, 2, 6, 6,  2,  0x6e91 }, /* Live! 24-bit */
 	{ USB_ID(0x041e, 0x3042), 0, 1, 1, 1,  1,  0x000d }, /* Usb X-Fi S51 */
 	{ USB_ID(0x041e, 0x30df), 0, 1, 1, 1,  1,  0x000d }, /* Usb X-Fi S51 Pro */
+	{ USB_ID(0x041e, 0x3237), 0, 1, 1, 1,  1,  0x000d }, /* Usb X-Fi S51 Pro */
 	{ USB_ID(0x041e, 0x3048), 2, 2, 6, 6,  2,  0x6e91 }, /* Toshiba SB0500 */
 };
 
-- 
1.9.1

[PATCH 3.4 146/172] x86/reboot: Fix a warning message triggered by stop_other_cpus()

[lizf]

From: Feng Tang <feng.tang@intel.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 55c844a4dd16a4d1fdc0cf2a283ec631a02ec448 upstream.

When rebooting our 24 CPU Westmere servers with 3.4-rc6, we
always see this warning msg:

Restarting system.
machine restart
------------[ cut here ]------------
WARNING: at arch/x86/kernel/smp.c:125
native_smp_send_reschedule+0x74/0xa7() Hardware name: X8DTN
Modules linked in: igb [last unloaded: scsi_wait_scan]
Pid: 1, comm: systemd-shutdow Not tainted 3.4.0-rc6+ #22
Call Trace:
 <IRQ>  [<ffffffff8102a41f>] warn_slowpath_common+0x7e/0x96
 [<ffffffff8102a44c>] warn_slowpath_null+0x15/0x17
 [<ffffffff81018cf7>] native_smp_send_reschedule+0x74/0xa7
 [<ffffffff810561c1>] trigger_load_balance+0x279/0x2a6
 [<ffffffff81050112>] scheduler_tick+0xe0/0xe9
 [<ffffffff81036768>] update_process_times+0x60/0x70
 [<ffffffff81062f2f>] tick_sched_timer+0x68/0x92
 [<ffffffff81046e33>] __run_hrtimer+0xb3/0x13c
 [<ffffffff81062ec7>] ? tick_nohz_handler+0xd0/0xd0
 [<ffffffff810474f2>] hrtimer_interrupt+0xdb/0x198
 [<ffffffff81019a35>] smp_apic_timer_interrupt+0x81/0x94
 [<ffffffff81655187>] apic_timer_interrupt+0x67/0x70
 <EOI>  [<ffffffff8101a3c4>] ? default_send_IPI_mask_allbutself_phys+0xb4/0xc4
 [<ffffffff8101c680>] physflat_send_IPI_allbutself+0x12/0x14
 [<ffffffff81018db4>] native_nmi_stop_other_cpus+0x8a/0xd6
 [<ffffffff810188ba>] native_machine_shutdown+0x50/0x67
 [<ffffffff81018926>] machine_shutdown+0xa/0xc
 [<ffffffff8101897e>] native_machine_restart+0x20/0x32
 [<ffffffff810189b0>] machine_restart+0xa/0xc
 [<ffffffff8103b196>] kernel_restart+0x47/0x4c
 [<ffffffff8103b2e6>] sys_reboot+0x13e/0x17c
 [<ffffffff8164e436>] ? _raw_spin_unlock_bh+0x10/0x12
 [<ffffffff810fcac9>] ? bdi_queue_work+0xcf/0xd8
 [<ffffffff810fe82f>] ? __bdi_start_writeback+0xae/0xb7
 [<ffffffff810e0d64>] ? iterate_supers+0xa3/0xb7
 [<ffffffff816547a2>] system_call_fastpath+0x16/0x1b
---[ end trace 320af5cb1cb60c5b ]---

The root cause seems to be the
default_send_IPI_mask_allbutself_phys() takes quite some time (I
measured it could be several ms) to complete sending NMIs to all
the other 23 CPUs, and for HZ=250/1000 system, the time is long
enough for a timer interrupt to happen, which will in turn
trigger to kick load balance to a stopped CPU and cause this
warning in native_smp_send_reschedule().

So disabling the local irq before stop_other_cpu() can fix this
problem (tested 25 times reboot ok), and it is fine as there
should be nobody caring the timer interrupt in such reboot
stage.

The latest 3.4 kernel slightly changes this behavior by sending
REBOOT_VECTOR first and only send NMI_VECTOR if the REBOOT_VCTOR
fails, and this patch is still needed to prevent the problem.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120530231541.4c13433a@feng-i7
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Vinson Lee <vlee@twopensource.com>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/x86/kernel/reboot.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 0bfcb2f..310cb01 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -701,9 +701,12 @@ void native_machine_shutdown(void)
 	/* Make certain I only run on the appropriate processor */
 	set_cpus_allowed_ptr(current, cpumask_of(reboot_cpu_id));
 
-	/* O.K Now that I'm on the appropriate processor,
-	 * stop all of the others.
+	/*
+	 * O.K Now that I'm on the appropriate processor, stop all of the
+	 * others. Also disable the local irq to not receive the per-cpu
+	 * timer interrupt which may trigger scheduler's load balance.
 	 */
+	local_irq_disable();
 	stop_other_cpus();
 #endif
 
-- 
1.9.1

[PATCH 3.4 147/172] softirq: reduce latencies

[lizf]

From: Eric Dumazet <edumazet@google.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit c10d73671ad30f54692f7f69f0e09e75d3a8926a upstream.

In various network workloads, __do_softirq() latencies can be up
to 20 ms if HZ=1000, and 200 ms if HZ=100.

This is because we iterate 10 times in the softirq dispatcher,
and some actions can consume a lot of cycles.

This patch changes the fallback to ksoftirqd condition to :

- A time limit of 2 ms.
- need_resched() being set on current task

When one of this condition is met, we wakeup ksoftirqd for further
softirq processing if we still have pending softirqs.

Using need_resched() as the only condition can trigger RCU stalls,
as we can keep BH disabled for too long.

I ran several benchmarks and got no significant difference in
throughput, but a very significant reduction of latencies (one order
of magnitude) :

In following bench, 200 antagonist "netperf -t TCP_RR" are started in
background, using all available cpus.

Then we start one "netperf -t TCP_RR", bound to the cpu handling the NIC
IRQ (hard+soft)

Before patch :

# netperf -H 7.7.7.84 -t TCP_RR -T2,2 -- -k
RT_LATENCY,MIN_LATENCY,MAX_LATENCY,P50_LATENCY,P90_LATENCY,P99_LATENCY,MEAN_LATENCY,STDDEV_LATENCY
MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET
to 7.7.7.84 () port 0 AF_INET : first burst 0 : cpu bind
RT_LATENCY=550110.424
MIN_LATENCY=146858
MAX_LATENCY=997109
P50_LATENCY=305000
P90_LATENCY=550000
P99_LATENCY=710000
MEAN_LATENCY=376989.12
STDDEV_LATENCY=184046.92

After patch :

# netperf -H 7.7.7.84 -t TCP_RR -T2,2 -- -k
RT_LATENCY,MIN_LATENCY,MAX_LATENCY,P50_LATENCY,P90_LATENCY,P99_LATENCY,MEAN_LATENCY,STDDEV_LATENCY
MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET
to 7.7.7.84 () port 0 AF_INET : first burst 0 : cpu bind
RT_LATENCY=40545.492
MIN_LATENCY=9834
MAX_LATENCY=78366
P50_LATENCY=33583
P90_LATENCY=59000
P99_LATENCY=69000
MEAN_LATENCY=38364.67
STDDEV_LATENCY=12865.26

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Tom Herbert <therbert@google.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[xr: Backported to 3.4: Adjust context]
Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 kernel/softirq.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/kernel/softirq.c b/kernel/softirq.c
index 671f959..db3df13 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -194,21 +194,21 @@ void local_bh_enable_ip(unsigned long ip)
 EXPORT_SYMBOL(local_bh_enable_ip);
 
 /*
- * We restart softirq processing MAX_SOFTIRQ_RESTART times,
- * and we fall back to softirqd after that.
+ * We restart softirq processing for at most 2 ms, 
+ * and if need_resched() is not set.
  *
- * This number has been established via experimentation.
+ * These limits have been established via experimentation. 
  * The two things to balance is latency against fairness -
  * we want to handle softirqs as soon as possible, but they
  * should not be able to lock up the box.
  */
-#define MAX_SOFTIRQ_RESTART 10
+#define MAX_SOFTIRQ_TIME  msecs_to_jiffies(2)
 
 asmlinkage void __do_softirq(void)
 {
 	struct softirq_action *h;
 	__u32 pending;
-	int max_restart = MAX_SOFTIRQ_RESTART;
+	unsigned long end = jiffies + MAX_SOFTIRQ_TIME;
 	int cpu;
 
 	pending = local_softirq_pending();
@@ -255,11 +255,12 @@ restart:
 	local_irq_disable();
 
 	pending = local_softirq_pending();
-	if (pending && --max_restart)
-		goto restart;
+	if (pending) {
+		if (time_before(jiffies, end) && !need_resched())
+			goto restart;
 
-	if (pending)
 		wakeup_softirqd();
+	}
 
 	lockdep_softirq_exit();
 
-- 
1.9.1

[PATCH 3.4 148/172] Fix lockup related to stop_machine being stuck in __do_softirq.

[lizf]

From: Ben Greear <greearb@candelatech.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 34376a50fb1fa095b9d0636fa41ed2e73125f214 upstream.

The stop machine logic can lock up if all but one of the migration
threads make it through the disable-irq step and the one remaining
thread gets stuck in __do_softirq.  The reason __do_softirq can hang is
that it has a bail-out based on jiffies timeout, but in the lockup case,
jiffies itself is not incremented.

To work around this, re-add the max_restart counter in __do_irq and stop
processing irqs after 10 restarts.

Thanks to Tejun Heo and Rusty Russell and others for helping me track
this down.

This was introduced in 3.9 by commit c10d73671ad3 ("softirq: reduce
latencies").

It may be worth looking into ath9k to see if it has issues with its irq
handler at a later date.

The hang stack traces look something like this:

    ------------[ cut here ]------------
    WARNING: at kernel/watchdog.c:245 watchdog_overflow_callback+0x9c/0xa7()
    Watchdog detected hard LOCKUP on cpu 2
    Modules linked in: ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 nfsv4 auth_rpcgss nfs fscache nf_nat_ipv4 nf_nat veth 8021q garp stp mrp llc pktgen lockd sunrpc]
    Pid: 23, comm: migration/2 Tainted: G         C   3.9.4+ #11
    Call Trace:
     <NMI>   warn_slowpath_common+0x85/0x9f
      warn_slowpath_fmt+0x46/0x48
      watchdog_overflow_callback+0x9c/0xa7
      __perf_event_overflow+0x137/0x1cb
      perf_event_overflow+0x14/0x16
      intel_pmu_handle_irq+0x2dc/0x359
      perf_event_nmi_handler+0x19/0x1b
      nmi_handle+0x7f/0xc2
      do_nmi+0xbc/0x304
      end_repeat_nmi+0x1e/0x2e
     <<EOE>>
      cpu_stopper_thread+0xae/0x162
      smpboot_thread_fn+0x258/0x260
      kthread+0xc7/0xcf
      ret_from_fork+0x7c/0xb0
    ---[ end trace 4947dfa9b0a4cec3 ]---
    BUG: soft lockup - CPU#1 stuck for 22s! [migration/1:17]
    Modules linked in: ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 nfsv4 auth_rpcgss nfs fscache nf_nat_ipv4 nf_nat veth 8021q garp stp mrp llc pktgen lockd sunrpc]
    irq event stamp: 835637905
    hardirqs last  enabled at (835637904): __do_softirq+0x9f/0x257
    hardirqs last disabled at (835637905): apic_timer_interrupt+0x6d/0x80
    softirqs last  enabled at (5654720): __do_softirq+0x1ff/0x257
    softirqs last disabled at (5654725): irq_exit+0x5f/0xbb
    CPU 1
    Pid: 17, comm: migration/1 Tainted: G        WC   3.9.4+ #11 To be filled by O.E.M. To be filled by O.E.M./To be filled by O.E.M.
    RIP: tasklet_hi_action+0xf0/0xf0
    Process migration/1
    Call Trace:
     <IRQ>
      __do_softirq+0x117/0x257
      irq_exit+0x5f/0xbb
      smp_apic_timer_interrupt+0x8a/0x98
      apic_timer_interrupt+0x72/0x80
     <EOI>
      printk+0x4d/0x4f
      stop_machine_cpu_stop+0x22c/0x274
      cpu_stopper_thread+0xae/0x162
      smpboot_thread_fn+0x258/0x260
      kthread+0xc7/0xcf
      ret_from_fork+0x7c/0xb0

Signed-off-by: Ben Greear <greearb@candelatech.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Pekka Riikonen <priikone@iki.fi>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[xr: Backported to 3.4: Adjust context]
Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 kernel/softirq.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/kernel/softirq.c b/kernel/softirq.c
index db3df13..5cc401e 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -194,8 +194,12 @@ void local_bh_enable_ip(unsigned long ip)
 EXPORT_SYMBOL(local_bh_enable_ip);
 
 /*
- * We restart softirq processing for at most 2 ms, 
- * and if need_resched() is not set.
+ * We restart softirq processing for at most MAX_SOFTIRQ_RESTART times,
+ * but break the loop if need_resched() is set or after 2 ms.
+ * The MAX_SOFTIRQ_TIME provides a nice upper bound in most cases, but in
+ * certain cases, such as stop_machine(), jiffies may cease to
+ * increment and so we need the MAX_SOFTIRQ_RESTART limit as
+ * well to make sure we eventually return from this method.
  *
  * These limits have been established via experimentation. 
  * The two things to balance is latency against fairness -
@@ -203,6 +207,7 @@ EXPORT_SYMBOL(local_bh_enable_ip);
  * should not be able to lock up the box.
  */
 #define MAX_SOFTIRQ_TIME  msecs_to_jiffies(2)
+#define MAX_SOFTIRQ_RESTART 10
 
 asmlinkage void __do_softirq(void)
 {
@@ -210,6 +215,7 @@ asmlinkage void __do_softirq(void)
 	__u32 pending;
 	unsigned long end = jiffies + MAX_SOFTIRQ_TIME;
 	int cpu;
+	int max_restart = MAX_SOFTIRQ_RESTART;
 
 	pending = local_softirq_pending();
 	account_system_vtime(current);
@@ -256,7 +262,8 @@ restart:
 
 	pending = local_softirq_pending();
 	if (pending) {
-		if (time_before(jiffies, end) && !need_resched())
+		if (time_before(jiffies, end) && !need_resched() &&
+		    --max_restart)
 			goto restart;
 
 		wakeup_softirqd();
-- 
1.9.1

[PATCH 3.4 149/172] splice: Apply generic position and size checks to each write

[lizf]

From: Ben Hutchings <ben@decadent.org.uk>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


3.2.67-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

We need to check the position and size of file writes against various
limits, using generic_write_check().  This was not being done for
the splice write path.  It was fixed upstream by commit 8d0207652cbe
("->splice_write() via ->write_iter()") but we can't apply that.

CVE-2014-7822

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/ocfs2/file.c | 8 ++++++--
 fs/splice.c     | 8 ++++++--
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index bc44ea5..dc79934 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -2474,9 +2474,7 @@ static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe,
 	struct address_space *mapping = out->f_mapping;
 	struct inode *inode = mapping->host;
 	struct splice_desc sd = {
-		.total_len = len,
 		.flags = flags,
-		.pos = *ppos,
 		.u.file = out,
 	};
 
@@ -2486,6 +2484,12 @@ static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe,
 			out->f_path.dentry->d_name.len,
 			out->f_path.dentry->d_name.name, len);
 
+	ret = generic_write_checks(out, ppos, &len, 0);
+	if (ret)
+		return ret;
+	sd.total_len = len;
+	sd.pos = *ppos;
+
 	if (pipe->inode)
 		mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT);
 
diff --git a/fs/splice.c b/fs/splice.c
index bed6a3c..67c5210 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -991,13 +991,17 @@ generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
 	struct address_space *mapping = out->f_mapping;
 	struct inode *inode = mapping->host;
 	struct splice_desc sd = {
-		.total_len = len,
 		.flags = flags,
-		.pos = *ppos,
 		.u.file = out,
 	};
 	ssize_t ret;
 
+	ret = generic_write_checks(out, ppos, &len, S_ISBLK(inode->i_mode));
+	if (ret)
+		return ret;
+	sd.total_len = len;
+	sd.pos = *ppos;
+
 	pipe_lock(pipe);
 
 	splice_from_pipe_begin(&sd);
-- 
1.9.1

[PATCH 3.4 150/172] powerpc/mpc85xx: Add ranges to etsec2 nodes

[lizf]

From: Scott Wood <scottwood@freescale.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit bb344ca5b90df62b1a3b7a35c6a9d00b306a170d upstream.

Commit 746c9e9f92dd "of/base: Fix PowerPC address parsing hack" limited
the applicability of the workaround whereby a missing ranges is treated
as an empty ranges.  This workaround was hiding a bug in the etsec2
device tree nodes, which have children with reg, but did not have
ranges.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Reported-by: Alexander Graf <agraf@suse.de>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi | 1 +
 arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi | 1 +
 arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi | 1 +
 3 files changed, 3 insertions(+)

diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
index 1382fec..7fcb1ac 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
@@ -50,6 +50,7 @@ ethernet@b0000 {
 	fsl,num_tx_queues = <0x8>;
 	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
 
 	queue-group@b0000 {
 		#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
index 221cd2e..9f25427 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
@@ -50,6 +50,7 @@ ethernet@b1000 {
 	fsl,num_tx_queues = <0x8>;
 	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
 
 	queue-group@b1000 {
 		#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
index 61456c3..cd7c318 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
@@ -49,6 +49,7 @@ ethernet@b2000 {
 	fsl,num_tx_queues = <0x8>;
 	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
 
 	queue-group@b2000 {
 		#address-cells = <1>;
-- 
1.9.1

[PATCH 3.4 151/172] sb_edac: Fix erroneous bytes->gigabytes conversion

[lizf]

From: Jim Snow <jim.m.snow@intel.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 8c009100295597f23978c224aec5751a365bc965 upstream.

Signed-off-by: Jim Snow <jim.snow@intel.com>
Signed-off-by: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Vinson Lee <vlee@twopensource.com>
[lizf: Backported to 3.4:
 - adjust context
 - use debugf0() instead of edac_dbg()]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/edac/sb_edac.c | 38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index 0924c30..593ff71 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -672,7 +672,7 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 	u32 reg;
 	u64 limit, prv = 0;
 	u64 tmp_mb;
-	u32 mb, kb;
+	u32 gb, mb;
 	u32 rir_way;
 
 	/*
@@ -685,9 +685,9 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 	pvt->tolm = GET_TOLM(reg);
 	tmp_mb = (1 + pvt->tolm) >> 20;
 
-	mb = div_u64_rem(tmp_mb, 1000, &kb);
-	debugf0("TOLM: %u.%03u GB (0x%016Lx)\n",
-		mb, kb, (u64)pvt->tolm);
+	gb = div_u64_rem(tmp_mb, 1024, &mb);
+	debugf0("TOHM: %u.%03u GB (0x%016Lx)\n",
+		gb, (mb*1000)/1024, (u64)pvt->tohm);
 
 	/* Address range is already 45:25 */
 	pci_read_config_dword(pvt->pci_sad1, TOHM,
@@ -695,9 +695,9 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 	pvt->tohm = GET_TOHM(reg);
 	tmp_mb = (1 + pvt->tohm) >> 20;
 
-	mb = div_u64_rem(tmp_mb, 1000, &kb);
+	gb = div_u64_rem(tmp_mb, 1024, &mb);
 	debugf0("TOHM: %u.%03u GB (0x%016Lx)",
-		mb, kb, (u64)pvt->tohm);
+		gb, (mb*1000)/1024, (u64)pvt->tohm);
 
 	/*
 	 * Step 2) Get SAD range and SAD Interleave list
@@ -719,11 +719,11 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 			break;
 
 		tmp_mb = (limit + 1) >> 20;
-		mb = div_u64_rem(tmp_mb, 1000, &kb);
+		gb = div_u64_rem(tmp_mb, 1000, &mb);
 		debugf0("SAD#%d %s up to %u.%03u GB (0x%016Lx) %s reg=0x%08x\n",
 			n_sads,
 			get_dram_attr(reg),
-			mb, kb,
+			gb, (mb*1000)/1024,
 			((u64)tmp_mb) << 20L,
 			INTERLEAVE_MODE(reg) ? "Interleave: 8:6" : "Interleave: [8:6]XOR[18:16]",
 			reg);
@@ -753,9 +753,9 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 			break;
 		tmp_mb = (limit + 1) >> 20;
 
-		mb = div_u64_rem(tmp_mb, 1000, &kb);
+		gb = div_u64_rem(tmp_mb, 1000, &mb);
 		debugf0("TAD#%d: up to %u.%03u GB (0x%016Lx), socket interleave %d, memory interleave %d, TGT: %d, %d, %d, %d, reg=0x%08x\n",
-			n_tads, mb, kb,
+			n_tads, gb, (mb*1000)/1024,
 			((u64)tmp_mb) << 20L,
 			(u32)TAD_SOCK(reg),
 			(u32)TAD_CH(reg),
@@ -778,10 +778,10 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 					      tad_ch_nilv_offset[j],
 					      &reg);
 			tmp_mb = TAD_OFFSET(reg) >> 20;
-			mb = div_u64_rem(tmp_mb, 1000, &kb);
+			gb = div_u64_rem(tmp_mb, 1024, &mb);
 			debugf0("TAD CH#%d, offset #%d: %u.%03u GB (0x%016Lx), reg=0x%08x\n",
 				i, j,
-				mb, kb,
+				gb, (mb*1000)/1024,
 				((u64)tmp_mb) << 20L,
 				reg);
 		}
@@ -803,10 +803,10 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 
 			tmp_mb = RIR_LIMIT(reg) >> 20;
 			rir_way = 1 << RIR_WAY(reg);
-			mb = div_u64_rem(tmp_mb, 1000, &kb);
+			gb = div_u64_rem(tmp_mb, 1024, &mb);
 			debugf0("CH#%d RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d, reg=0x%08x\n",
 				i, j,
-				mb, kb,
+				gb, (mb*1000)/1024,
 				((u64)tmp_mb) << 20L,
 				rir_way,
 				reg);
@@ -817,10 +817,10 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 						      &reg);
 				tmp_mb = RIR_OFFSET(reg) << 6;
 
-				mb = div_u64_rem(tmp_mb, 1000, &kb);
+				gb = div_u64_rem(tmp_mb, 1024, &mb);
 				debugf0("CH#%d RIR#%d INTL#%d, offset %u.%03u GB (0x%016Lx), tgt: %d, reg=0x%08x\n",
 					i, j, k,
-					mb, kb,
+					gb, (mb*1000)/1024,
 					((u64)tmp_mb) << 20L,
 					(u32)RIR_RNK_TGT(reg),
 					reg);
@@ -858,7 +858,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
 	u8			ch_way,sck_way;
 	u32			tad_offset;
 	u32			rir_way;
-	u32			mb, kb;
+	u32			gb, mb;
 	u64			ch_addr, offset, limit, prv = 0;
 
 
@@ -1084,10 +1084,10 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
 			continue;
 
 		limit = RIR_LIMIT(reg);
-		mb = div_u64_rem(limit >> 20, 1000, &kb);
+		gb = div_u64_rem(limit >> 20, 1024, &mb);
 		debugf0("RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d\n",
 			n_rir,
-			mb, kb,
+			gb, (mb*1000)/1024,
 			limit,
 			1 << RIR_WAY(reg));
 		if  (ch_addr <= limit)
-- 
1.9.1

[PATCH 3.4 152/172] spi: spidev: fix possible arithmetic overflow for multi-transfer message

[lizf]

From: Ian Abbott <abbotti@mev.co.uk>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit f20fbaad7620af2df36a1f9d1c9ecf48ead5b747 upstream.

`spidev_message()` sums the lengths of the individual SPI transfers to
determine the overall SPI message length.  It restricts the total
length, returning an error if too long, but it does not check for
arithmetic overflow.  For example, if the SPI message consisted of two
transfers and the first has a length of 10 and the second has a length
of (__u32)(-1), the total length would be seen as 9, even though the
second transfer is actually very long.  If the second transfer specifies
a null `rx_buf` and a non-null `tx_buf`, the `copy_from_user()` could
overrun the spidev's pre-allocated tx buffer before it reaches an
invalid user memory address.  Fix it by checking that neither the total
nor the individual transfer lengths exceed the maximum allowed value.

Thanks to Dan Carpenter for reporting the potential integer overflow.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
[Ian Abbott: Note: original commit compares the lengths to INT_MAX instead
of bufsiz due to changes in earlier commits.]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/spi/spidev.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 830adbe..1556db9 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -241,7 +241,10 @@ static int spidev_message(struct spidev_data *spidev,
 		k_tmp->len = u_tmp->len;
 
 		total += k_tmp->len;
-		if (total > bufsiz) {
+		/* Check total length of transfers.  Also check each
+		 * transfer length to avoid arithmetic overflow.
+		 */
+		if (total > bufsiz || k_tmp->len > bufsiz) {
 			status = -EMSGSIZE;
 			goto done;
 		}
-- 
1.9.1

[PATCH 3.4 153/172] IB/core: Avoid leakage from kernel to user space

[lizf]

From: Eli Cohen <eli@dev.mellanox.co.il>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 377b513485fd885dea1083a9a5430df65b35e048 upstream.

Clear the reserved field of struct ib_uverbs_async_event_desc which is
copied to user space.

Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/infiniband/core/uverbs_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index 604556d..5b51e4e 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -451,6 +451,7 @@ static void ib_uverbs_async_handler(struct ib_uverbs_file *file,
 
 	entry->desc.async.element    = element;
 	entry->desc.async.event_type = event;
+	entry->desc.async.reserved   = 0;
 	entry->counter               = counter;
 
 	list_add_tail(&entry->list, &file->async_file->event_list);
-- 
1.9.1

[PATCH 3.4 154/172] hpsa: refine the pci enable/disable handling

[lizf]

From: Tomas Henzl <thenzl@redhat.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 132aa220b45d60e9b20def1e9d8be9422eed9616 upstream.

When a second(kdump) kernel starts and the hard reset method is used
the driver calls pci_disable_device without previously enabling it,
so the kernel shows a warning -
[   16.876248] WARNING: at drivers/pci/pci.c:1431 pci_disable_device+0x84/0x90()
[   16.882686] Device hpsa
disabling already-disabled device
...
This patch fixes it, in addition to this I tried to balance also some other pairs
of enable/disable device in the driver.
Unfortunately I wasn't able to verify the functionality for the case of a sw reset,
because of a lack of proper hw.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/scsi/hpsa.c | 42 ++++++++++++++++++++++++++++--------------
 1 file changed, 28 insertions(+), 14 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index bc88cab..4b11dcb 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3507,10 +3507,6 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 
 	/* Save the PCI command register */
 	pci_read_config_word(pdev, 4, &command_register);
-	/* Turn the board off.  This is so that later pci_restore_state()
-	 * won't turn the board on before the rest of config space is ready.
-	 */
-	pci_disable_device(pdev);
 	pci_save_state(pdev);
 
 	/* find the first memory BAR, so we can find the cfg table */
@@ -3558,11 +3554,6 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 		goto unmap_cfgtable;
 
 	pci_restore_state(pdev);
-	rc = pci_enable_device(pdev);
-	if (rc) {
-		dev_warn(&pdev->dev, "failed to enable device.\n");
-		goto unmap_cfgtable;
-	}
 	pci_write_config_word(pdev, 4, command_register);
 
 	/* Some devices (notably the HP Smart Array 5i Controller)
@@ -4068,6 +4059,23 @@ static __devinit int hpsa_init_reset_devices(struct pci_dev *pdev)
 	if (!reset_devices)
 		return 0;
 
+	/* kdump kernel is loading, we don't know in which state is
+	 * the pci interface. The dev->enable_cnt is equal zero
+	 * so we call enable+disable, wait a while and switch it on.
+	 */
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_warn(&pdev->dev, "Failed to enable PCI device\n");
+		return -ENODEV;
+	}
+	pci_disable_device(pdev);
+	msleep(260);			/* a randomly chosen number */
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_warn(&pdev->dev, "failed to enable device.\n");
+		return -ENODEV;
+	}
+
 	/* Reset the controller with a PCI power-cycle or via doorbell */
 	rc = hpsa_kdump_hard_reset_controller(pdev);
 
@@ -4076,10 +4084,11 @@ static __devinit int hpsa_init_reset_devices(struct pci_dev *pdev)
 	 * "performant mode".  Or, it might be 640x, which can't reset
 	 * due to concerns about shared bbwc between 6402/6404 pair.
 	 */
-	if (rc == -ENOTSUPP)
-		return rc; /* just try to do the kdump anyhow. */
-	if (rc)
-		return -ENODEV;
+	if (rc) {
+		if (rc != -ENOTSUPP) /* just try to do the kdump anyhow. */
+			rc = -ENODEV;
+		goto out_disable;
+	}
 
 	/* Now try to get the controller to respond to a no-op */
 	dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n");
@@ -4090,7 +4099,11 @@ static __devinit int hpsa_init_reset_devices(struct pci_dev *pdev)
 			dev_warn(&pdev->dev, "no-op failed%s\n",
 					(i < 11 ? "; re-trying" : ""));
 	}
-	return 0;
+
+out_disable:
+
+	pci_disable_device(pdev);
+	return rc;
 }
 
 static __devinit int hpsa_allocate_cmd_pool(struct ctlr_info *h)
@@ -4191,6 +4204,7 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
 		iounmap(h->transtable);
 	if (h->cfgtable)
 		iounmap(h->cfgtable);
+	pci_disable_device(h->pdev);
 	pci_release_regions(h->pdev);
 	kfree(h);
 }
-- 
1.9.1

[PATCH 3.4 155/172] hpsa: add missing pci_set_master in kdump path

[lizf]

From: Tomas Henzl <thenzl@redhat.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 859c75aba20264d87dd026bab0d0ca3bff385955 upstream.

Add a call to pci_set_master(...)  missing in the previous
patch "hpsa: refine the pci enable/disable handling".
Found thanks to Rob Elliot.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Robert Elliott <elliott@hp.com>
Tested-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/scsi/hpsa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 4b11dcb..c45c6a3 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -4075,7 +4075,7 @@ static __devinit int hpsa_init_reset_devices(struct pci_dev *pdev)
 		dev_warn(&pdev->dev, "failed to enable device.\n");
 		return -ENODEV;
 	}
-
+	pci_set_master(pdev);
 	/* Reset the controller with a PCI power-cycle or via doorbell */
 	rc = hpsa_kdump_hard_reset_controller(pdev);
 
-- 
1.9.1

[PATCH 3.4 156/172] hpsa: turn off interrupts when kdump starts

[lizf]

From: Tomas Henzl <thenzl@redhat.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 3b747298786355c6934b0892fc9ae4ca44105192 upstream.

Sometimes when the card is restarted it may cause -
"irq 16: nobody cared (try booting with the "irqpoll" option)"
that is likely caused so, that the card, after the hard reset
finishes, pulls on the irq. Disabling the ints before or after
the hpsa_kdump_hard_reset_controller fixes it.

At this point we can't know in which state the card is,
so using SA5_INTR_OFF + SA5_REPLY_INTR_MASK_OFFSET defines directly,
instead of the function the drivers provides, seems to be apropriate.

Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Vinson Lee <vlee@twopensource.com>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/scsi/hpsa.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index c45c6a3..cdff47e 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -4055,6 +4055,7 @@ static void __devinit hpsa_hba_inquiry(struct ctlr_info *h)
 static __devinit int hpsa_init_reset_devices(struct pci_dev *pdev)
 {
 	int rc, i;
+	void __iomem *vaddr;
 
 	if (!reset_devices)
 		return 0;
@@ -4076,6 +4077,15 @@ static __devinit int hpsa_init_reset_devices(struct pci_dev *pdev)
 		return -ENODEV;
 	}
 	pci_set_master(pdev);
+
+	vaddr = pci_ioremap_bar(pdev, 0);
+	if (vaddr == NULL) {
+		rc = -ENOMEM;
+		goto out_disable;
+	}
+	writel(SA5_INTR_OFF, vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+	iounmap(vaddr);
+
 	/* Reset the controller with a PCI power-cycle or via doorbell */
 	rc = hpsa_kdump_hard_reset_controller(pdev);
 
-- 
1.9.1

[PATCH 3.4 157/172] hpsa: fix memory leak in kdump hard reset

[lizf]

From: Tomas Henzl <thenzl@redhat.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 03741d956eaac31264952e0afa181b62713892a5 upstream.

There is a potential memory leak in hpsa_kdump_hard_reset_controller.

Reviewed-by: Don Brace <don.brace@pmcs.com>
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/scsi/hpsa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index cdff47e..f5ccdcdf 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3530,7 +3530,7 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 	}
 	rc = write_driver_ver_to_cfgtable(cfgtable);
 	if (rc)
-		goto unmap_vaddr;
+		goto unmap_cfgtable;
 
 	/* If reset via doorbell register is supported, use that.
 	 * There are two such methods.  Favor the newest method.
-- 
1.9.1

[PATCH 3.4 158/172] fs: take i_mutex during prepare_binprm for set[ug]id executables

[lizf]

From: Jann Horn <jann@thejh.net>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 8b01fc86b9f425899f8a3a8fc1c47d73c2c20543 upstream.

This prevents a race between chown() and execve(), where chowning a
setuid-user binary to root would momentarily make the binary setuid
root.

This patch was mostly written by Linus Torvalds.

Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[lizf: Backported to 3.4:
 - adjust context
 - remove task_no_new_priv and user namespace stuff
 - open-code file_inode()
 - s/READ_ONCE/ACCESS_ONCE]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/exec.c | 65 +++++++++++++++++++++++++++++++++++++++------------------------
 1 file changed, 40 insertions(+), 25 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index 5b9dfbe..91d238f 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1248,6 +1248,45 @@ void install_exec_creds(struct linux_binprm *bprm)
 }
 EXPORT_SYMBOL(install_exec_creds);
 
+static void bprm_fill_uid(struct linux_binprm *bprm)
+{
+	struct inode *inode;
+	unsigned int mode;
+	uid_t uid;
+	gid_t gid;
+
+	/* clear any previous set[ug]id data from a previous binary */
+	bprm->cred->euid = current_euid();
+	bprm->cred->egid = current_egid();
+
+	if (bprm->file->f_path.mnt->mnt_flags & MNT_NOSUID)
+		return;
+
+	inode = bprm->file->f_path.dentry->d_inode;
+	mode = ACCESS_ONCE(inode->i_mode);
+	if (!(mode & (S_ISUID|S_ISGID)))
+		return;
+
+	/* Be careful if suid/sgid is set */
+	mutex_lock(&inode->i_mutex);
+
+	/* reload atomically mode/uid/gid now that lock held */
+	mode = inode->i_mode;
+	uid = inode->i_uid;
+	gid = inode->i_gid;
+	mutex_unlock(&inode->i_mutex);
+
+	if (mode & S_ISUID) {
+		bprm->per_clear |= PER_CLEAR_ON_SETID;
+		bprm->cred->euid = uid;
+	}
+
+	if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) {
+		bprm->per_clear |= PER_CLEAR_ON_SETID;
+		bprm->cred->egid = gid;
+	}
+}
+
 /*
  * determine how safe it is to execute the proposed program
  * - the caller must hold ->cred_guard_mutex to protect against
@@ -1297,36 +1336,12 @@ static int check_unsafe_exec(struct linux_binprm *bprm)
  */
 int prepare_binprm(struct linux_binprm *bprm)
 {
-	umode_t mode;
-	struct inode * inode = bprm->file->f_path.dentry->d_inode;
 	int retval;
 
-	mode = inode->i_mode;
 	if (bprm->file->f_op == NULL)
 		return -EACCES;
 
-	/* clear any previous set[ug]id data from a previous binary */
-	bprm->cred->euid = current_euid();
-	bprm->cred->egid = current_egid();
-
-	if (!(bprm->file->f_path.mnt->mnt_flags & MNT_NOSUID)) {
-		/* Set-uid? */
-		if (mode & S_ISUID) {
-			bprm->per_clear |= PER_CLEAR_ON_SETID;
-			bprm->cred->euid = inode->i_uid;
-		}
-
-		/* Set-gid? */
-		/*
-		 * If setgid is set but no group execute bit then this
-		 * is a candidate for mandatory locking, not a setgid
-		 * executable.
-		 */
-		if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) {
-			bprm->per_clear |= PER_CLEAR_ON_SETID;
-			bprm->cred->egid = inode->i_gid;
-		}
-	}
+	bprm_fill_uid(bprm);
 
 	/* fill in binprm security blob */
 	retval = security_bprm_set_creds(bprm);
-- 
1.9.1

[PATCH 3.4 159/172] openvswitch: Check currect return value from skb_gso_segment()

[lizf]

From: Pravin B Shelar <pshelar@nicira.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 92e5dfc34cf39c20ae1087bd5e676238b5d0dfac upstream.

Fix return check typo.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/openvswitch/datapath.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c
index e66341e..1efa548 100644
--- a/net/openvswitch/datapath.c
+++ b/net/openvswitch/datapath.c
@@ -269,8 +269,8 @@ static int queue_gso_packets(int dp_ifindex, struct sk_buff *skb,
 	int err;
 
 	segs = skb_gso_segment(skb, NETIF_F_SG | NETIF_F_HW_CSUM);
-	if (IS_ERR(skb))
-		return PTR_ERR(skb);
+	if (IS_ERR(segs))
+		return PTR_ERR(segs);
 
 	/* Queue all of the segments. */
 	skb = segs;
-- 
1.9.1

[PATCH 3.4 160/172] net: make skb_gso_segment error handling more robust

[lizf]

From: Florian Westphal <fw@strlen.de>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 330966e501ffe282d7184fde4518d5e0c24bc7f8 upstream.

skb_gso_segment has three possible return values:
1. a pointer to the first segmented skb
2. an errno value (IS_ERR())
3. NULL.  This can happen when GSO is used for header verification.

However, several callers currently test IS_ERR instead of IS_ERR_OR_NULL
and would oops when NULL is returned.

Note that these call sites should never actually see such a NULL return
value; all callers mask out the GSO bits in the feature argument.

However, there have been issues with some protocol handlers erronously not
respecting the specified feature mask in some cases.

It is preferable to get 'have to turn off hw offloading, else slow' reports
rather than 'kernel crashes'.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ben Hutchings <ben@decadent.org.uk>
[lizf: Backported to 3.4: drop some hunks as there are fewer skb_gso_segment()
 users in 3.4]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/netfilter/nf_queue.c   | 2 +-
 net/openvswitch/datapath.c | 2 ++
 net/xfrm/xfrm_output.c     | 2 ++
 3 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index ce60cf0..9139a26 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -255,7 +255,7 @@ int nf_queue(struct sk_buff *skb,
 	 * returned by nf_queue.  For instance, callers rely on -ECANCELED to mean
 	 * 'ignore this hook'.
 	 */
-	if (IS_ERR(segs))
+	if (IS_ERR_OR_NULL(segs))
 		goto out_err;
 	queued = 0;
 	err = 0;
diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c
index 1efa548..a92d635 100644
--- a/net/openvswitch/datapath.c
+++ b/net/openvswitch/datapath.c
@@ -271,6 +271,8 @@ static int queue_gso_packets(int dp_ifindex, struct sk_buff *skb,
 	segs = skb_gso_segment(skb, NETIF_F_SG | NETIF_F_HW_CSUM);
 	if (IS_ERR(segs))
 		return PTR_ERR(segs);
+	if (segs == NULL)
+		return -EINVAL;
 
 	/* Queue all of the segments. */
 	skb = segs;
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 95a338c..11dd2fb 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -151,6 +151,8 @@ static int xfrm_output_gso(struct sk_buff *skb)
 	kfree_skb(skb);
 	if (IS_ERR(segs))
 		return PTR_ERR(segs);
+	if (segs == NULL)
+		return -EINVAL;
 
 	do {
 		struct sk_buff *nskb = segs->next;
-- 
1.9.1

[PATCH 3.4 161/172] ipvs: uninitialized data with IP_VS_IPV6

[lizf]

From: Dan Carpenter <dan.carpenter@oracle.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 3b05ac3824ed9648c0d9c02d51d9b54e4e7e874f upstream.

The app_tcp_pkt_out() function expects "*diff" to be set and ends up
using uninitialized data if CONFIG_IP_VS_IPV6 is turned on.

The same issue is there in app_tcp_pkt_in().  Thanks to Julian Anastasov
for noticing that.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 net/netfilter/ipvs/ip_vs_ftp.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/net/netfilter/ipvs/ip_vs_ftp.c b/net/netfilter/ipvs/ip_vs_ftp.c
index e39f693..fe3c8d7 100644
--- a/net/netfilter/ipvs/ip_vs_ftp.c
+++ b/net/netfilter/ipvs/ip_vs_ftp.c
@@ -183,6 +183,8 @@ static int ip_vs_ftp_out(struct ip_vs_app *app, struct ip_vs_conn *cp,
 	struct nf_conn *ct;
 	struct net *net;
 
+	*diff = 0;
+
 #ifdef CONFIG_IP_VS_IPV6
 	/* This application helper doesn't work with IPv6 yet,
 	 * so turn this into a no-op for IPv6 packets
@@ -191,8 +193,6 @@ static int ip_vs_ftp_out(struct ip_vs_app *app, struct ip_vs_conn *cp,
 		return 1;
 #endif
 
-	*diff = 0;
-
 	/* Only useful for established sessions */
 	if (cp->state != IP_VS_TCP_S_ESTABLISHED)
 		return 1;
@@ -318,6 +318,9 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp,
 	struct ip_vs_conn *n_cp;
 	struct net *net;
 
+	/* no diff required for incoming packets */
+	*diff = 0;
+
 #ifdef CONFIG_IP_VS_IPV6
 	/* This application helper doesn't work with IPv6 yet,
 	 * so turn this into a no-op for IPv6 packets
@@ -326,9 +329,6 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp,
 		return 1;
 #endif
 
-	/* no diff required for incoming packets */
-	*diff = 0;
-
 	/* Only useful for established sessions */
 	if (cp->state != IP_VS_TCP_S_ESTABLISHED)
 		return 1;
-- 
1.9.1

[PATCH 3.4 162/172] autofs4: check dev ioctl size before allocating

[lizf]

From: Sasha Levin <sasha.levin@oracle.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit e53d77eb8bb616e903e34cc7a918401bee3b5149 upstream.

There wasn't any check of the size passed from userspace before trying
to allocate the memory required.

This meant that userspace might request more space than allowed,
triggering an OOM.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/autofs4/dev-ioctl.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index fbaa428..ace3eea 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -103,6 +103,9 @@ static struct autofs_dev_ioctl *copy_dev_ioctl(struct autofs_dev_ioctl __user *i
 	if (tmp.size < sizeof(tmp))
 		return ERR_PTR(-EINVAL);
 
+	if (tmp.size > (PATH_MAX + sizeof(tmp)))
+		return ERR_PTR(-ENAMETOOLONG);
+
 	res = memdup_user(in, tmp.size);
 	if (!IS_ERR(res))
 		res->size = tmp.size;
-- 
1.9.1

[PATCH 3.4 163/172] UBI: fix soft lockup in ubi_check_volume()

[lizf]

From: hujianyang <hujianyang@huawei.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 9aa272b492e7551a9ee0e2c83c720ea013698485 upstream.

Running mtd-utils/tests/ubi-tests/io_basic.c could cause
soft lockup or watchdog reset. It is because *updatevol*
will perform ubi_check_volume() after updating finish
and this function will full scan the updated lebs if the
volume is initialized as STATIC_VOLUME.

This patch adds *cond_resched()* in the loop of lebs scan
to avoid soft lockup.

Helped by Richard Weinberger <richard@nod.at>

[ 2158.067096] INFO: rcu_sched self-detected stall on CPU { 1}  (t=2101 jiffies g=1606 c=1605 q=56)
[ 2158.172867] CPU: 1 PID: 2073 Comm: io_basic Tainted: G           O 3.10.53 #21
[ 2158.172898] [<c000f624>] (unwind_backtrace+0x0/0x120) from [<c000c294>] (show_stack+0x10/0x14)
[ 2158.172918] [<c000c294>] (show_stack+0x10/0x14) from [<c008ac3c>] (rcu_check_callbacks+0x1c0/0x660)
[ 2158.172936] [<c008ac3c>] (rcu_check_callbacks+0x1c0/0x660) from [<c002b480>] (update_process_times+0x38/0x64)
[ 2158.172953] [<c002b480>] (update_process_times+0x38/0x64) from [<c005ff38>] (tick_sched_handle+0x54/0x60)
[ 2158.172966] [<c005ff38>] (tick_sched_handle+0x54/0x60) from [<c00601ac>] (tick_sched_timer+0x44/0x74)
[ 2158.172978] [<c00601ac>] (tick_sched_timer+0x44/0x74) from [<c003f348>] (__run_hrtimer+0xc8/0x1b8)
[ 2158.172992] [<c003f348>] (__run_hrtimer+0xc8/0x1b8) from [<c003fd9c>] (hrtimer_interrupt+0x128/0x2a4)
[ 2158.173007] [<c003fd9c>] (hrtimer_interrupt+0x128/0x2a4) from [<c0246f1c>] (arch_timer_handler_virt+0x28/0x30)
[ 2158.173022] [<c0246f1c>] (arch_timer_handler_virt+0x28/0x30) from [<c0086214>] (handle_percpu_devid_irq+0x9c/0x124)
[ 2158.173036] [<c0086214>] (handle_percpu_devid_irq+0x9c/0x124) from [<c0082bd8>] (generic_handle_irq+0x20/0x30)
[ 2158.173049] [<c0082bd8>] (generic_handle_irq+0x20/0x30) from [<c000969c>] (handle_IRQ+0x64/0x8c)
[ 2158.173060] [<c000969c>] (handle_IRQ+0x64/0x8c) from [<c0008544>] (gic_handle_irq+0x3c/0x60)
[ 2158.173074] [<c0008544>] (gic_handle_irq+0x3c/0x60) from [<c02f0f80>] (__irq_svc+0x40/0x50)
[ 2158.173083] Exception stack(0xc4043c98 to 0xc4043ce0)
[ 2158.173092] 3c80:                                                       c4043ce4 00000019
[ 2158.173102] 3ca0: 1f8a865f c050ad10 1f8a864c 00000031 c04b5970 0003ebce 00000000 f3550000
[ 2158.173113] 3cc0: bf00bc68 00000800 0003ebce c4043ce0 c0186d14 c0186cb8 80000013 ffffffff
[ 2158.173130] [<c02f0f80>] (__irq_svc+0x40/0x50) from [<c0186cb8>] (read_current_timer+0x4/0x38)
[ 2158.173145] [<c0186cb8>] (read_current_timer+0x4/0x38) from [<1f8a865f>] (0x1f8a865f)
[ 2183.927097] BUG: soft lockup - CPU#1 stuck for 22s! [io_basic:2073]
[ 2184.002229] Modules linked in: nandflash(O) [last unloaded: nandflash]

Signed-off-by: Wang Kai <morgan.wang@huawei.com>
Signed-off-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/mtd/ubi/misc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mtd/ubi/misc.c b/drivers/mtd/ubi/misc.c
index f6a7d7a..b14ab43 100644
--- a/drivers/mtd/ubi/misc.c
+++ b/drivers/mtd/ubi/misc.c
@@ -74,6 +74,8 @@ int ubi_check_volume(struct ubi_device *ubi, int vol_id)
 	for (i = 0; i < vol->used_ebs; i++) {
 		int size;
 
+		cond_resched();
+
 		if (i == vol->used_ebs - 1)
 			size = vol->last_eb_bytes;
 		else
-- 
1.9.1

[PATCH 3.4 164/172] perf tools: Fix build with perl 5.18

[lizf]

From: "Kirill A. Shutemov" <kirill@shutemov.name>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 575bf1d04e908469d26da424b52fc1b12a1db9d8 upstream.

perl.h from new Perl release doesn't like -Wundef and -Wswitch-default:

/usr/lib/perl5/core_perl/CORE/perl.h:548:5: error: "SILENT_NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if SILENT_NO_TAINT_SUPPORT && !defined(NO_TAINT_SUPPORT)
     ^
/usr/lib/perl5/core_perl/CORE/perl.h:556:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if NO_TAINT_SUPPORT
     ^
In file included from /usr/lib/perl5/core_perl/CORE/perl.h:3471:0,
                 from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/sv.h:1455:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if NO_TAINT_SUPPORT
     ^
In file included from /usr/lib/perl5/core_perl/CORE/perl.h:3472:0,
                 from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/regexp.h:436:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if NO_TAINT_SUPPORT
     ^
In file included from /usr/lib/perl5/core_perl/CORE/hv.h:592:0,
                 from /usr/lib/perl5/core_perl/CORE/perl.h:3480,
                 from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_siphash_2_4’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:222:3: error: switch missing default case [-Werror=switch-default]
   switch( left )
   ^
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_superfast’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:274:5: error: switch missing default case [-Werror=switch-default]
     switch (rem) { \
     ^
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_murmur3’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:398:5: error: switch missing default case [-Werror=switch-default]
     switch(bytes_in_carry) { /* how many bytes in carry */
     ^

Let's disable the warnings for code which uses perl.h.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1372063394-20126-1-git-send-email-kirill@shutemov.name
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Vinson Lee <vlee@twopensource.com>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 tools/perf/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 2db7ba0..331647c 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -816,10 +816,10 @@ $(OUTPUT)util/rbtree.o: ../../lib/rbtree.c $(OUTPUT)PERF-CFLAGS
 	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
 
 $(OUTPUT)util/scripting-engines/trace-event-perl.o: util/scripting-engines/trace-event-perl.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
+	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow -Wno-undef -Wno-switch-default $<
 
 $(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o: scripts/perl/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs $<
+	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs -Wno-undef -Wno-switch-default $<
 
 $(OUTPUT)util/scripting-engines/trace-event-python.o: util/scripting-engines/trace-event-python.c $(OUTPUT)PERF-CFLAGS
 	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
-- 
1.9.1

[PATCH 3.4 165/172] config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected

[lizf]

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit a6dfa128ce5c414ab46b1d690f7a1b8decb8526d upstream.

A huge amount of NIC drivers use the DMA API, however if
compiled under 32-bit an very important part of the DMA API can
be ommitted leading to the drivers not working at all
(especially if used with 'swiotlb=force iommu=soft').

As Prashant Sreedharan explains it: "the driver [tg3] uses
DEFINE_DMA_UNMAP_ADDR(), dma_unmap_addr_set() to keep a copy of
the dma "mapping" and dma_unmap_addr() to get the "mapping"
value. On most of the platforms this is a no-op, but ... with
"iommu=soft and swiotlb=force" this house keeping is required,
... otherwise we pass 0 while calling pci_unmap_/pci_dma_sync_
instead of the DMA address."

As such enable this even when using 32-bit kernels.

Reported-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Prashant Sreedharan <prashant@broadcom.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boris.ostrovsky@oracle.com
Cc: cascardo@linux.vnet.ibm.com
Cc: david.vrabel@citrix.com
Cc: sanjeevb@broadcom.com
Cc: siva.kallam@broadcom.com
Cc: vyasevich@gmail.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/20150417190448.GA9462@l.oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/x86/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 917c109..eda8cb9 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -129,7 +129,7 @@ config SBUS
 	bool
 
 config NEED_DMA_MAP_STATE
-       def_bool (X86_64 || INTEL_IOMMU || DMA_API_DEBUG)
+       def_bool (X86_64 || INTEL_IOMMU || DMA_API_DEBUG || SWIOTLB)
 
 config NEED_SG_DMA_LENGTH
 	def_bool y
-- 
1.9.1

[PATCH 3.4 166/172] PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a pci_dev

[lizf]

From: Yinghai Lu <yinghai@kernel.org>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit fc2798502f860b18f3c7121e4dc659d3d9d28d74 upstream.

These interfaces:

  pcibios_resource_to_bus(struct pci_dev *dev, *bus_region, *resource)
  pcibios_bus_to_resource(struct pci_dev *dev, *resource, *bus_region)

took a pci_dev, but they really depend only on the pci_bus.  And we want to
use them in resource allocation paths where we have the bus but not a
device, so this patch converts them to take the pci_bus instead of the
pci_dev:

  pcibios_resource_to_bus(struct pci_bus *bus, *bus_region, *resource)
  pcibios_bus_to_resource(struct pci_bus *bus, *resource, *bus_region)

In fact, with standard PCI-PCI bridges, they only depend on the host
bridge, because that's the only place address translation occurs, but
we aren't going that far yet.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Dirk Behme <dirk.behme@gmail.com>
[lizf: Backported to 3.4:
 - make changes to pci_host_bridge() instead of find_pci_root_bus()
 - adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 arch/alpha/kernel/pci-sysfs.c             |  4 ++--
 arch/powerpc/kernel/pci_of_scan.c         |  4 ++--
 arch/powerpc/platforms/powernv/pci-ioda.c |  4 ++--
 arch/sparc/kernel/pci.c                   | 12 ++++++------
 drivers/pci/probe.c                       | 32 +++++++++++++++----------------
 drivers/pci/quirks.c                      |  2 +-
 drivers/pci/rom.c                         |  2 +-
 drivers/pci/setup-bus.c                   | 14 +++++++-------
 drivers/pci/setup-res.c                   |  2 +-
 drivers/pcmcia/i82092.c                   |  2 +-
 drivers/pcmcia/yenta_socket.c             |  6 +++---
 drivers/scsi/sym53c8xx_2/sym_glue.c       |  5 +++--
 drivers/video/arkfb.c                     |  2 +-
 drivers/video/s3fb.c                      |  2 +-
 drivers/video/vt8623fb.c                  |  2 +-
 include/linux/pci.h                       |  4 ++--
 16 files changed, 49 insertions(+), 50 deletions(-)

diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
index 53649c7..1a33355 100644
--- a/arch/alpha/kernel/pci-sysfs.c
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -84,7 +84,7 @@ static int pci_mmap_resource(struct kobject *kobj,
 	if (iomem_is_exclusive(res->start))
 		return -EINVAL;
 
-	pcibios_resource_to_bus(pdev, &bar, res);
+	pcibios_resource_to_bus(pdev->bus, &bar, res);
 	vma->vm_pgoff += bar.start >> (PAGE_SHIFT - (sparse ? 5 : 0));
 	mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
 
@@ -140,7 +140,7 @@ static int sparse_mem_mmap_fits(struct pci_dev *pdev, int num)
 	long dense_offset;
 	unsigned long sparse_size;
 
-	pcibios_resource_to_bus(pdev, &bar, &pdev->resource[num]);
+	pcibios_resource_to_bus(pdev->bus, &bar, &pdev->resource[num]);
 
 	/* All core logic chips have 4G sparse address space, except
 	   CIA which has 16G (see xxx_SPARSE_MEM and xxx_DENSE_MEM
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 89dde17..55551a8 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -111,7 +111,7 @@ static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev)
 		res->name = pci_name(dev);
 		region.start = base;
 		region.end = base + size - 1;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 	}
 }
 
@@ -276,7 +276,7 @@ void __devinit of_scan_pci_bridge(struct pci_dev *dev)
 		res->flags = flags;
 		region.start = of_read_number(&ranges[1], 2);
 		region.end = region.start + size - 1;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 	}
 	sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
 		bus->number);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 5da8e8d..79a17f7 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -392,7 +392,7 @@ static void __devinit pnv_ioda_setup_pe_segments(struct pci_dev *dev)
 
 	/* Setup IO segments */
 	if (io_res.start < io_res.end) {
-		pcibios_resource_to_bus(dev, &region, &io_res);
+		pcibios_resource_to_bus(dev->bus, &region, &io_res);
 		pos = region.start;
 		i = pos / phb->ioda.io_segsize;
 		while(i < phb->ioda.total_pe && pos <= region.end) {
@@ -422,7 +422,7 @@ static void __devinit pnv_ioda_setup_pe_segments(struct pci_dev *dev)
 
 	/* Setup M32 segments */
 	if (m32_res.start < m32_res.end) {
-		pcibios_resource_to_bus(dev, &region, &m32_res);
+		pcibios_resource_to_bus(dev->bus, &region, &m32_res);
 		pos = region.start;
 		i = pos / phb->ioda.m32_segsize;
 		while(i < phb->ioda.total_pe && pos <= region.end) {
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 8c5c9a5..ab5f471 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -409,7 +409,7 @@ static void __devinit pci_cfg_fake_ranges(struct pci_dev *dev,
 		res2.flags = res->flags;
 		region.start = base;
 		region.end = limit + 0xfff;
-		pcibios_bus_to_resource(dev, &res2, &region);
+		pcibios_bus_to_resource(dev->bus, &res2, &region);
 		if (!res->start)
 			res->start = res2.start;
 		if (!res->end)
@@ -427,7 +427,7 @@ static void __devinit pci_cfg_fake_ranges(struct pci_dev *dev,
 			      IORESOURCE_MEM);
 		region.start = base;
 		region.end = limit + 0xfffff;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 	}
 
 	pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
@@ -458,7 +458,7 @@ static void __devinit pci_cfg_fake_ranges(struct pci_dev *dev,
 			      IORESOURCE_MEM | IORESOURCE_PREFETCH);
 		region.start = base;
 		region.end = limit + 0xfffff;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 	}
 }
 
@@ -480,7 +480,7 @@ static void __devinit apb_fake_ranges(struct pci_dev *dev,
 	res->flags = IORESOURCE_IO;
 	region.start = (first << 21);
 	region.end = (last << 21) + ((1 << 21) - 1);
-	pcibios_bus_to_resource(dev, res, &region);
+	pcibios_bus_to_resource(dev->bus, res, &region);
 
 	pci_read_config_byte(dev, APB_MEM_ADDRESS_MAP, &map);
 	apb_calc_first_last(map, &first, &last);
@@ -488,7 +488,7 @@ static void __devinit apb_fake_ranges(struct pci_dev *dev,
 	res->flags = IORESOURCE_MEM;
 	region.start = (first << 29);
 	region.end = (last << 29) + ((1 << 29) - 1);
-	pcibios_bus_to_resource(dev, res, &region);
+	pcibios_bus_to_resource(dev->bus, res, &region);
 }
 
 static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm,
@@ -579,7 +579,7 @@ static void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm,
 		res->flags = flags;
 		region.start = GET_64BIT(ranges, 1);
 		region.end = region.start + size - 1;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 	}
 after_ranges:
 	sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index d62ad0b..868440f 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -44,12 +44,10 @@ int no_pci_devices(void)
 }
 EXPORT_SYMBOL(no_pci_devices);
 
-static struct pci_host_bridge *pci_host_bridge(struct pci_dev *dev)
+static struct pci_host_bridge *pci_host_bridge(struct pci_bus *bus)
 {
-	struct pci_bus *bus;
 	struct pci_host_bridge *bridge;
 
-	bus = dev->bus;
 	while (bus->parent)
 		bus = bus->parent;
 
@@ -66,10 +64,10 @@ static bool resource_contains(struct resource *res1, struct resource *res2)
 	return res1->start <= res2->start && res1->end >= res2->end;
 }
 
-void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+void pcibios_resource_to_bus(struct pci_bus *bus, struct pci_bus_region *region,
 			     struct resource *res)
 {
-	struct pci_host_bridge *bridge = pci_host_bridge(dev);
+	struct pci_host_bridge *bridge = pci_host_bridge(bus);
 	struct pci_host_bridge_window *window;
 	resource_size_t offset = 0;
 
@@ -94,10 +92,10 @@ static bool region_contains(struct pci_bus_region *region1,
 	return region1->start <= region2->start && region1->end >= region2->end;
 }
 
-void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+void pcibios_bus_to_resource(struct pci_bus *bus, struct resource *res,
 			     struct pci_bus_region *region)
 {
-	struct pci_host_bridge *bridge = pci_host_bridge(dev);
+	struct pci_host_bridge *bridge = pci_host_bridge(bus);
 	struct pci_host_bridge_window *window;
 	struct pci_bus_region bus_region;
 	resource_size_t offset = 0;
@@ -298,11 +296,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 			pci_write_config_dword(dev, pos + 4, 0);
 			region.start = 0;
 			region.end = sz64;
-			pcibios_bus_to_resource(dev, res, &region);
+			pcibios_bus_to_resource(dev->bus, res, &region);
 		} else {
 			region.start = l64;
 			region.end = l64 + sz64;
-			pcibios_bus_to_resource(dev, res, &region);
+			pcibios_bus_to_resource(dev->bus, res, &region);
 			dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n",
 				   pos, res);
 		}
@@ -314,7 +312,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 
 		region.start = l;
 		region.end = l + sz;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 
 		dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res);
 	}
@@ -373,7 +371,7 @@ static void __devinit pci_read_bridge_io(struct pci_bus *child)
 		res2.flags = res->flags;
 		region.start = base;
 		region.end = limit + 0xfff;
-		pcibios_bus_to_resource(dev, &res2, &region);
+		pcibios_bus_to_resource(dev->bus, &res2, &region);
 		if (!res->start)
 			res->start = res2.start;
 		if (!res->end)
@@ -399,7 +397,7 @@ static void __devinit pci_read_bridge_mmio(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
 		region.start = base;
 		region.end = limit + 0xfffff;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 		dev_printk(KERN_DEBUG, &dev->dev, "  bridge window %pR\n", res);
 	}
 }
@@ -448,7 +446,7 @@ static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child)
 			res->flags |= IORESOURCE_MEM_64;
 		region.start = base;
 		region.end = limit + 0xfffff;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 		dev_printk(KERN_DEBUG, &dev->dev, "  bridge window %pR\n", res);
 	}
 }
@@ -1063,24 +1061,24 @@ int pci_setup_device(struct pci_dev *dev)
 				region.end = 0x1F7;
 				res = &dev->resource[0];
 				res->flags = LEGACY_IO_RESOURCE;
-				pcibios_bus_to_resource(dev, res, &region);
+				pcibios_bus_to_resource(dev->bus, res, &region);
 				region.start = 0x3F6;
 				region.end = 0x3F6;
 				res = &dev->resource[1];
 				res->flags = LEGACY_IO_RESOURCE;
-				pcibios_bus_to_resource(dev, res, &region);
+				pcibios_bus_to_resource(dev->bus, res, &region);
 			}
 			if ((progif & 4) == 0) {
 				region.start = 0x170;
 				region.end = 0x177;
 				res = &dev->resource[2];
 				res->flags = LEGACY_IO_RESOURCE;
-				pcibios_bus_to_resource(dev, res, &region);
+				pcibios_bus_to_resource(dev->bus, res, &region);
 				region.start = 0x376;
 				region.end = 0x376;
 				res = &dev->resource[3];
 				res->flags = LEGACY_IO_RESOURCE;
-				pcibios_bus_to_resource(dev, res, &region);
+				pcibios_bus_to_resource(dev->bus, res, &region);
 			}
 		}
 		break;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index ffde183..c030024 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -393,7 +393,7 @@ static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region,
 		/* Convert from PCI bus to resource space.  */
 		bus_region.start = res->start;
 		bus_region.end = res->end;
-		pcibios_bus_to_resource(dev, res, &bus_region);
+		pcibios_bus_to_resource(dev->bus, res, &bus_region);
 
 		if (pci_claim_resource(dev, nr) == 0)
 			dev_info(&dev->dev, "quirk: %pR claimed by %s\n",
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index e31659c..336b999 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -31,7 +31,7 @@ int pci_enable_rom(struct pci_dev *pdev)
 	if (!res->flags)
 		return -1;
 
-	pcibios_resource_to_bus(pdev, &region, res);
+	pcibios_resource_to_bus(pdev->bus, &region, res);
 	pci_read_config_dword(pdev, pdev->rom_base_reg, &rom_addr);
 	rom_addr &= ~PCI_ROM_ADDRESS_MASK;
 	rom_addr |= region.start | PCI_ROM_ADDRESS_ENABLE;
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 8fa2d4b..244ada4 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -408,7 +408,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
 		 bus->secondary, bus->subordinate);
 
 	res = bus->resource[0];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_IO) {
 		/*
 		 * The IO resource is allocated a range twice as large as it
@@ -422,7 +422,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
 	}
 
 	res = bus->resource[1];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_IO) {
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
 		pci_write_config_dword(bridge, PCI_CB_IO_BASE_1,
@@ -432,7 +432,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
 	}
 
 	res = bus->resource[2];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_MEM) {
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
 		pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_0,
@@ -442,7 +442,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
 	}
 
 	res = bus->resource[3];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_MEM) {
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
 		pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_1,
@@ -473,7 +473,7 @@ static void pci_setup_bridge_io(struct pci_bus *bus)
 
 	/* Set up the top and bottom of the PCI I/O segment for this bus. */
 	res = bus->resource[0];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_IO) {
 		pci_read_config_dword(bridge, PCI_IO_BASE, &l);
 		l &= 0xffff0000;
@@ -504,7 +504,7 @@ static void pci_setup_bridge_mmio(struct pci_bus *bus)
 
 	/* Set up the top and bottom of the PCI Memory segment for this bus. */
 	res = bus->resource[1];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_MEM) {
 		l = (region.start >> 16) & 0xfff0;
 		l |= region.end & 0xfff00000;
@@ -530,7 +530,7 @@ static void pci_setup_bridge_mmio_pref(struct pci_bus *bus)
 	/* Set up PREF base/limit. */
 	bu = lu = 0;
 	res = bus->resource[2];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_PREFETCH) {
 		l = (region.start >> 16) & 0xfff0;
 		l |= region.end & 0xfff00000;
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index be76eba..d427277 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -50,7 +50,7 @@ void pci_update_resource(struct pci_dev *dev, int resno)
 	if (res->flags & IORESOURCE_PCI_FIXED)
 		return;
 
-	pcibios_resource_to_bus(dev, &region, res);
+	pcibios_resource_to_bus(dev->bus, &region, res);
 
 	new = region.start | (res->flags & PCI_REGION_FLAG_MASK);
 	if (res->flags & IORESOURCE_IO)
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index 4e8831b..099034b 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -610,7 +610,7 @@ static int i82092aa_set_mem_map(struct pcmcia_socket *socket, struct pccard_mem_
 	
 	enter("i82092aa_set_mem_map");
 
-	pcibios_resource_to_bus(sock_info->dev, &region, mem->res);
+	pcibios_resource_to_bus(sock_info->dev->bus, &region, mem->res);
 	
 	map = mem->map;
 	if (map > 4) {
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index d07f9ac..13e76f9 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -445,7 +445,7 @@ static int yenta_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *
 	unsigned int start, stop, card_start;
 	unsigned short word;
 
-	pcibios_resource_to_bus(socket->dev, &region, mem->res);
+	pcibios_resource_to_bus(socket->dev->bus, &region, mem->res);
 
 	map = mem->map;
 	start = region.start;
@@ -709,7 +709,7 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
 	region.start = config_readl(socket, addr_start) & mask;
 	region.end = config_readl(socket, addr_end) | ~mask;
 	if (region.start && region.end > region.start && !override_bios) {
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 		if (pci_claim_resource(dev, PCI_BRIDGE_RESOURCES + nr) == 0)
 			return 0;
 		dev_printk(KERN_INFO, &dev->dev,
@@ -1033,7 +1033,7 @@ static void yenta_config_init(struct yenta_socket *socket)
 	struct pci_dev *dev = socket->dev;
 	struct pci_bus_region region;
 
-	pcibios_resource_to_bus(socket->dev, &region, &dev->resource[0]);
+	pcibios_resource_to_bus(socket->dev->bus, &region, &dev->resource[0]);
 
 	config_writel(socket, CB_LEGACY_MODE_BASE, 0);
 	config_writel(socket, PCI_BASE_ADDRESS_0, region.start);
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 36d1ed7..1e3d789 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1609,7 +1609,7 @@ sym_iomap_device(struct sym_device *device)
 	struct pci_bus_region bus_addr;
 	int i = 2;
 
-	pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[1]);
+	pcibios_resource_to_bus(pdev->bus, &bus_addr, &pdev->resource[1]);
 	device->mmio_base = bus_addr.start;
 
 	if (device->chip.features & FE_RAM) {
@@ -1619,7 +1619,8 @@ sym_iomap_device(struct sym_device *device)
 		 */
 		if (!pdev->resource[i].flags)
 			i++;
-		pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[i]);
+		pcibios_resource_to_bus(pdev->bus, &bus_addr,
+					&pdev->resource[i]);
 		device->ram_base = bus_addr.start;
 	}
 
diff --git a/drivers/video/arkfb.c b/drivers/video/arkfb.c
index 555dd4c..65196fe 100644
--- a/drivers/video/arkfb.c
+++ b/drivers/video/arkfb.c
@@ -1014,7 +1014,7 @@ static int __devinit ark_pci_probe(struct pci_dev *dev, const struct pci_device_
 
 	vga_res.flags = IORESOURCE_IO;
 
-	pcibios_bus_to_resource(dev, &vga_res, &bus_reg);
+	pcibios_bus_to_resource(dev->bus, &vga_res, &bus_reg);
 
 	par->state.vgabase = (void __iomem *) vga_res.start;
 
diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c
index 2c80246..7b7af8c 100644
--- a/drivers/video/s3fb.c
+++ b/drivers/video/s3fb.c
@@ -1172,7 +1172,7 @@ static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_i
 
 	vga_res.flags = IORESOURCE_IO;
 
-	pcibios_bus_to_resource(dev, &vga_res, &bus_reg);
+	pcibios_bus_to_resource(dev->bus, &vga_res, &bus_reg);
 
 	par->state.vgabase = (void __iomem *) vga_res.start;
 
diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c
index 4e74d26..dfecf02 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/vt8623fb.c
@@ -727,7 +727,7 @@ static int __devinit vt8623_pci_probe(struct pci_dev *dev, const struct pci_devi
 
 	vga_res.flags = IORESOURCE_IO;
 
-	pcibios_bus_to_resource(dev, &vga_res, &bus_reg);
+	pcibios_bus_to_resource(dev->bus, &vga_res, &bus_reg);
 
 	par->state.vgabase = (void __iomem *) vga_res.start;
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index e444f5b..469c953 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -648,9 +648,9 @@ void pci_fixup_cardbus(struct pci_bus *);
 
 /* Generic PCI functions used internally */
 
-void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+void pcibios_resource_to_bus(struct pci_bus *bus, struct pci_bus_region *region,
 			     struct resource *res);
-void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+void pcibios_bus_to_resource(struct pci_bus *bus, struct resource *res,
 			     struct pci_bus_region *region);
 void pcibios_scan_specific_bus(int busn);
 extern struct pci_bus *pci_find_bus(int domain, int busnr);
-- 
1.9.1

[PATCH 3.4 167/172] don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()

[lizf]

From: Al Viro <viro@zeniv.linux.org.uk>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 7bd88377d482e1eae3c5329b12e33cfd664fa6a9 upstream.

return the value instead, and have path_init() do the assignment.  Broken by
"vfs: Fix absolute RCU path walk failures due to uninitialized seq number",
which was Cc-stable with 2.6.38+ as destination.  This one should go where
it went.

To avoid dummy value returned in case when root is already set (it would do
no harm, actually, since the only caller that doesn't ignore the return value
is guaranteed to have nd->root *not* set, but it's more obvious that way),
lift the check into callers.  And do the same to set_root(), to keep them
in sync.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
[lizf: the previous backport of this upstream commit is buggy. fix it]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 fs/namei.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/namei.c b/fs/namei.c
index 5974fb5..bdcd705 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -579,7 +579,8 @@ static __always_inline int __vfs_follow_link(struct nameidata *nd, const char *l
 		goto fail;
 
 	if (*link == '/') {
-		set_root(nd);
+		if (!nd->root.mnt)
+			set_root(nd);
 		path_put(&nd->path);
 		nd->path = nd->root;
 		path_get(&nd->root);
-- 
1.9.1

[PATCH 3.4 168/172] cdc-acm: prevent infinite loop when parsing CDC headers.

[lizf]

From: Quentin Casasnovas <quentin.casasnovas@oracle.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 0d3bba0287d4e284c3ec7d3397e81eec920d5e7e upstream.

Phil and I found out a problem with commit:

  7e860a6e7aa6 ("cdc-acm: add sanity checks")

It added some sanity checks to ignore potential garbage in CDC headers but
also introduced a potential infinite loop.  This can happen at the first
loop iteration (elength = 0 in that case) if the description isn't a
DT_CS_INTERFACE or later if 'buffer[0]' is zero.

It should also be noted that the wrong length was being added to 'buffer'
in case 'buffer[1]' was not a DT_CS_INTERFACE descriptor, since elength was
assigned after that check in the loop.

A specially crafted USB device could be used to trigger this infinite loop.

Fixes: 7e860a6e7aa6 ("cdc-acm: add sanity checks")
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
CC: Oliver Neukum <oneukum@suse.de>
CC: Adam Lee <adam8157@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/usb/class/cdc-acm.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 57877a9..25bc1d6 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1044,11 +1044,16 @@ static int acm_probe(struct usb_interface *intf,
 	}
 
 	while (buflen > 0) {
+		elength = buffer[0];
+		if (!elength) {
+			dev_err(&intf->dev, "skipping garbage byte\n");
+			elength = 1;
+			goto next_desc;
+		}
 		if (buffer[1] != USB_DT_CS_INTERFACE) {
 			dev_err(&intf->dev, "skipping garbage\n");
 			goto next_desc;
 		}
-		elength = buffer[0];
 
 		switch (buffer[2]) {
 		case USB_CDC_UNION_TYPE: /* we've found it */
-- 
1.9.1

[PATCH 3.4 169/172] IB/core: don't disallow registering region starting at 0x0

[lizf]

From: Yann Droneaud <ydroneaud@opteya.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 66578b0b2f69659f00b6169e6fe7377c4b100d18 upstream.

In a call to ib_umem_get(), if address is 0x0 and size is
already page aligned, check added in commit 8494057ab5e4
("IB/uverbs: Prevent integer overflow in ib_umem_get address
arithmetic") will refuse to register a memory region that
could otherwise be valid (provided vm.mmap_min_addr sysctl
and mmap_low_allowed SELinux knobs allow userspace to map
something at address 0x0).

This patch allows back such registration: ib_umem_get()
should probably don't care of the base address provided it
can be pinned with get_user_pages().

There's two possible overflows, in (addr + size) and in
PAGE_ALIGN(addr + size), this patch keep ensuring none
of them happen while allowing to pin memory at address
0x0. Anyway, the case of size equal 0 is no more (partially)
handled as 0-length memory region are disallowed by an
earlier check.

Link: http://mid.gmane.org/cover.1428929103.git.ydroneaud@opteya.com
Cc: Shachar Raindel <raindel@mellanox.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/infiniband/core/umem.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index 055ebeb..d0254be 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -98,8 +98,8 @@ struct ib_umem *ib_umem_get(struct ib_ucontext *context, unsigned long addr,
 	 * If the combination of the addr and size requested for this memory
 	 * region causes an integer overflow, return error.
 	 */
-	if ((PAGE_ALIGN(addr + size) <= size) ||
-	    (PAGE_ALIGN(addr + size) <= addr))
+	if (((addr + size) < addr) ||
+	    PAGE_ALIGN(addr + size) < (addr + size))
 		return ERR_PTR(-EINVAL);
 
 	if (!can_do_mlock())
-- 
1.9.1

[PATCH 3.4 170/172] writeback: use |1 instead of +1 to protect against div by zero

[lizf]

From: Tejun Heo <tj@kernel.org>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 464d1387acb94dc43ba772b35242345e3d2ead1b upstream.

mm/page-writeback.c has several places where 1 is added to the divisor
to prevent division by zero exceptions; however, if the original
divisor is equivalent to -1, adding 1 leads to division by zero.

There are three places where +1 is used for this purpose - one in
pos_ratio_polynom() and two in bdi_position_ratio().  The second one
in bdi_position_ratio() actually triggered div-by-zero oops on a
machine running a 3.10 kernel.  The divisor is

  x_intercept - bdi_setpoint + 1 == span + 1

span is confirmed to be (u32)-1.  It isn't clear how it ended up that
but it could be from write bandwidth calculation underflow fixed by
c72efb658f7c ("writeback: fix possible underflow in write bandwidth
calculation").

At any rate, +1 isn't a proper protection against div-by-zero.  This
patch converts all +1 protections to |1.  Note that
bdi_update_dirty_ratelimit() was already using |1 before this patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
[lizf: Backported to 3.4: drop other two changes as there's only one
 such statment in 3.4]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 mm/page-writeback.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 25aaa31..ecd1c4c 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -716,7 +716,7 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi,
 	 * scale global setpoint to bdi's:
 	 *	bdi_setpoint = setpoint * bdi_thresh / thresh
 	 */
-	x = div_u64((u64)bdi_thresh << 16, thresh + 1);
+	x = div_u64((u64)bdi_thresh << 16, thresh | 1);
 	bdi_setpoint = setpoint * (u64)x >> 16;
 	/*
 	 * Use span=(8*write_bw) in single bdi case as indicated by
-- 
1.9.1

[PATCH 3.4 171/172] xen-pciback: Add name prefix to global 'permissive' variable

[lizf]

From: Ben Hutchings <ben@decadent.org.uk>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 8014bcc86ef112eab9ee1db312dba4e6b608cf89 upstream.

The variable for the 'permissive' module parameter used to be static
but was recently changed to be extern.  This puts it in the kernel
global namespace if the driver is built-in, so its name should begin
with a prefix identifying the driver.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: af6fc858a35b ("xen-pciback: limit guest control of command register")
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 drivers/xen/xen-pciback/conf_space.c        | 6 +++---
 drivers/xen/xen-pciback/conf_space.h        | 2 +-
 drivers/xen/xen-pciback/conf_space_header.c | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/xen/xen-pciback/conf_space.c b/drivers/xen/xen-pciback/conf_space.c
index 82ab1c3..bb8cb69 100644
--- a/drivers/xen/xen-pciback/conf_space.c
+++ b/drivers/xen/xen-pciback/conf_space.c
@@ -16,8 +16,8 @@
 #include "conf_space.h"
 #include "conf_space_quirks.h"
 
-bool permissive;
-module_param(permissive, bool, 0644);
+bool xen_pcibk_permissive;
+module_param_named(permissive, xen_pcibk_permissive, bool, 0644);
 
 /* This is where xen_pcibk_read_config_byte, xen_pcibk_read_config_word,
  * xen_pcibk_write_config_word, and xen_pcibk_write_config_byte are created. */
@@ -262,7 +262,7 @@ int xen_pcibk_config_write(struct pci_dev *dev, int offset, int size, u32 value)
 		 * This means that some fields may still be read-only because
 		 * they have entries in the config_field list that intercept
 		 * the write and do nothing. */
-		if (dev_data->permissive || permissive) {
+		if (dev_data->permissive || xen_pcibk_permissive) {
 			switch (size) {
 			case 1:
 				err = pci_write_config_byte(dev, offset,
diff --git a/drivers/xen/xen-pciback/conf_space.h b/drivers/xen/xen-pciback/conf_space.h
index 2e1d73d..62461a8 100644
--- a/drivers/xen/xen-pciback/conf_space.h
+++ b/drivers/xen/xen-pciback/conf_space.h
@@ -64,7 +64,7 @@ struct config_field_entry {
 	void *data;
 };
 
-extern bool permissive;
+extern bool xen_pcibk_permissive;
 
 #define OFFSET(cfg_entry) ((cfg_entry)->base_offset+(cfg_entry)->field->offset)
 
diff --git a/drivers/xen/xen-pciback/conf_space_header.c b/drivers/xen/xen-pciback/conf_space_header.c
index a5bb81a..1667a90 100644
--- a/drivers/xen/xen-pciback/conf_space_header.c
+++ b/drivers/xen/xen-pciback/conf_space_header.c
@@ -105,7 +105,7 @@ static int command_write(struct pci_dev *dev, int offset, u16 value, void *data)
 
 	cmd->val = value;
 
-	if (!permissive && (!dev_data || !dev_data->permissive))
+	if (!xen_pcibk_permissive && (!dev_data || !dev_data->permissive))
 		return 0;
 
 	/* Only allow the guest to control certain bits. */
-- 
1.9.1

[PATCH 3.4 172/172] slub: refactoring unfreeze_partials()

[lizf]

From: Joonsoo Kim <js1304@gmail.com>

3.4.108-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit 43d77867a4f333de4e4189114c480dd365133c09 upstream.

Current implementation of unfreeze_partials() is so complicated,
but benefit from it is insignificant. In addition many code in
do {} while loop have a bad influence to a fail rate of cmpxchg_double_slab.
Under current implementation which test status of cpu partial slab
and acquire list_lock in do {} while loop,
we don't need to acquire a list_lock and gain a little benefit
when front of the cpu partial slab is to be discarded, but this is a rare case.
In case that add_partial is performed and cmpxchg_double_slab is failed,
remove_partial should be called case by case.

I think that these are disadvantages of current implementation,
so I do refactoring unfreeze_partials().

Minimizing code in do {} while loop introduce a reduced fail rate
of cmpxchg_double_slab. Below is output of 'slabinfo -r kmalloc-256'
when './perf stat -r 33 hackbench 50 process 4000 > /dev/null' is done.

** before **
Cmpxchg_double Looping
------------------------
Locked Cmpxchg Double redos   182685
Unlocked Cmpxchg Double redos 0

** after **
Cmpxchg_double Looping
------------------------
Locked Cmpxchg Double redos   177995
Unlocked Cmpxchg Double redos 1

We can see cmpxchg_double_slab fail rate is improved slightly.

Bolow is output of './perf stat -r 30 hackbench 50 process 4000 > /dev/null'.

** before **
 Performance counter stats for './hackbench 50 process 4000' (30 runs):

     108517.190463 task-clock                #    7.926 CPUs utilized            ( +-  0.24% )
         2,919,550 context-switches          #    0.027 M/sec                    ( +-  3.07% )
           100,774 CPU-migrations            #    0.929 K/sec                    ( +-  4.72% )
           124,201 page-faults               #    0.001 M/sec                    ( +-  0.15% )
   401,500,234,387 cycles                    #    3.700 GHz                      ( +-  0.24% )
   <not supported> stalled-cycles-frontend
   <not supported> stalled-cycles-backend
   250,576,913,354 instructions              #    0.62  insns per cycle          ( +-  0.13% )
    45,934,956,860 branches                  #  423.297 M/sec                    ( +-  0.14% )
       188,219,787 branch-misses             #    0.41% of all branches          ( +-  0.56% )

      13.691837307 seconds time elapsed                                          ( +-  0.24% )

** after **
 Performance counter stats for './hackbench 50 process 4000' (30 runs):

     107784.479767 task-clock                #    7.928 CPUs utilized            ( +-  0.22% )
         2,834,781 context-switches          #    0.026 M/sec                    ( +-  2.33% )
            93,083 CPU-migrations            #    0.864 K/sec                    ( +-  3.45% )
           123,967 page-faults               #    0.001 M/sec                    ( +-  0.15% )
   398,781,421,836 cycles                    #    3.700 GHz                      ( +-  0.22% )
   <not supported> stalled-cycles-frontend
   <not supported> stalled-cycles-backend
   250,189,160,419 instructions              #    0.63  insns per cycle          ( +-  0.09% )
    45,855,370,128 branches                  #  425.436 M/sec                    ( +-  0.10% )
       169,881,248 branch-misses             #    0.37% of all branches          ( +-  0.43% )

      13.596272341 seconds time elapsed                                          ( +-  0.22% )

No regression is found, but rather we can see slightly better result.

Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
 mm/slub.c | 48 ++++++++++++++----------------------------------
 1 file changed, 14 insertions(+), 34 deletions(-)

diff --git a/mm/slub.c b/mm/slub.c
index 54ac6e9..aff0637 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1882,18 +1882,24 @@ redo:
 /* Unfreeze all the cpu partial slabs */
 static void unfreeze_partials(struct kmem_cache *s)
 {
-	struct kmem_cache_node *n = NULL;
+	struct kmem_cache_node *n = NULL, *n2 = NULL;
 	struct kmem_cache_cpu *c = this_cpu_ptr(s->cpu_slab);
 	struct page *page, *discard_page = NULL;
 
 	while ((page = c->partial)) {
-		enum slab_modes { M_PARTIAL, M_FREE };
-		enum slab_modes l, m;
 		struct page new;
 		struct page old;
 
 		c->partial = page->next;
-		l = M_FREE;
+
+		n2 = get_node(s, page_to_nid(page));
+		if (n != n2) {
+			if (n)
+				spin_unlock(&n->list_lock);
+
+			n = n2;
+			spin_lock(&n->list_lock);
+		}
 
 		do {
 
@@ -1906,43 +1912,17 @@ static void unfreeze_partials(struct kmem_cache *s)
 
 			new.frozen = 0;
 
-			if (!new.inuse && (!n || n->nr_partial > s->min_partial))
-				m = M_FREE;
-			else {
-				struct kmem_cache_node *n2 = get_node(s,
-							page_to_nid(page));
-
-				m = M_PARTIAL;
-				if (n != n2) {
-					if (n)
-						spin_unlock(&n->list_lock);
-
-					n = n2;
-					spin_lock(&n->list_lock);
-				}
-			}
-
-			if (l != m) {
-				if (l == M_PARTIAL) {
-					remove_partial(n, page);
-					stat(s, FREE_REMOVE_PARTIAL);
-				} else {
-					add_partial(n, page,
-						DEACTIVATE_TO_TAIL);
-					stat(s, FREE_ADD_PARTIAL);
-				}
-
-				l = m;
-			}
-
 		} while (!cmpxchg_double_slab(s, page,
 				old.freelist, old.counters,
 				new.freelist, new.counters,
 				"unfreezing slab"));
 
-		if (m == M_FREE) {
+		if (unlikely(!new.inuse && n->nr_partial > s->min_partial)) {
 			page->next = discard_page;
 			discard_page = page;
+		} else {
+			add_partial(n, page, DEACTIVATE_TO_TAIL);
+			stat(s, FREE_ADD_PARTIAL);
 		}
 	}
 
-- 
1.9.1

Re: [PATCH 3.4 000/172] 3.4.108-rc1 review

[Guenter Roeck]

On 06/16/2015 01:33 AM, lizf@kernel.org wrote:
> From: Zefan Li <lizefan@huawei.com>
>
> This is the start of the stable review cycle for the 3.4.108 release.
> There are 172 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Jun 18 08:30:58 UTC 2015.
> Anything received after that time might be too late.
>

Build results:
	total: 98 pass: 94 fail: 4
Failed builds:
	arm:allmodconfig
	score:defconfig
	sparc64:allmodconfig
	xtensa:allmodconfig
Qemu test results:
	total: 23 pass: 22 fail: 1
Failed tests:
	arm:arm_versatile_defconfig

Results are as expected.
Details are available at http://server.roeck-us.net:8010/builders.

Guenter

Re: [PATCH 3.4 000/172] 3.4.108-rc1 review

[lizf]

From: Zefan Li <lizefan@huawei.com>

This is the combined patch for 3.4.106-rc1 relative to 3.4.105.

---

diff --git a/Makefile b/Makefile
index f53f41a..22e3c17 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 4
-SUBLEVEL = 107
-EXTRAVERSION =
+SUBLEVEL = 108
+EXTRAVERSION = -rc1
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*
diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
index 53649c7..1a33355 100644
--- a/arch/alpha/kernel/pci-sysfs.c
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -84,7 +84,7 @@ static int pci_mmap_resource(struct kobject *kobj,
 	if (iomem_is_exclusive(res->start))
 		return -EINVAL;
 
-	pcibios_resource_to_bus(pdev, &bar, res);
+	pcibios_resource_to_bus(pdev->bus, &bar, res);
 	vma->vm_pgoff += bar.start >> (PAGE_SHIFT - (sparse ? 5 : 0));
 	mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
 
@@ -140,7 +140,7 @@ static int sparse_mem_mmap_fits(struct pci_dev *pdev, int num)
 	long dense_offset;
 	unsigned long sparse_size;
 
-	pcibios_resource_to_bus(pdev, &bar, &pdev->resource[num]);
+	pcibios_resource_to_bus(pdev->bus, &bar, &pdev->resource[num]);
 
 	/* All core logic chips have 4G sparse address space, except
 	   CIA which has 16G (see xxx_SPARSE_MEM and xxx_DENSE_MEM
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 89f56f3..8c3f8e8 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -38,7 +38,7 @@ static inline void at91rm9200_standby(void)
 		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
 		"    str    %5, [%1, %2]"
 		:
-		: "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
+		: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
 		  "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
 		  "r" (lpr));
 }
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index c1fe32d..f801fe8 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/io.h>
+#include <linux/regulator/machine.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
@@ -711,6 +712,8 @@ static void __init corgi_init(void)
 		sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	regulator_has_full_constraints();
 }
 
 static void __init fixup_corgi(struct tag *tags, char **cmdline,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index b83b95a..f35a30f 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -881,6 +881,8 @@ static void __init hx4700_init(void)
 	mdelay(10);
 	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
 	mdelay(10);
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(H4700, "HP iPAQ HX4700")
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 89d98c8..39d1068 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <linux/regulator/machine.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/pxa2xx_spi.h>
@@ -452,6 +453,7 @@ static void __init poodle_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
 	poodle_init_spi();
+	regulator_has_full_constraints();
 }
 
 static void __init fixup_poodle(struct tag *tags, char **cmdline,
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index df2ab0f..a1647d0 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -968,6 +968,8 @@ static void __init spitz_init(void)
 	spitz_nor_init();
 	spitz_nand_init();
 	spitz_i2c_init();
+
+	regulator_has_full_constraints();
 }
 
 static void __init spitz_fixup(struct tag *tags, char **cmdline,
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 2fa499e..69bbe4e 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -80,6 +80,7 @@ static int sa11x0_pm_enter(suspend_state_t state)
 	/*
 	 * Ensure not to come back here if it wasn't intended
 	 */
+	RCSR = RCSR_SMR;
 	PSPR = 0;
 
 	/*
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
index 1382fec..7fcb1ac 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
@@ -50,6 +50,7 @@ ethernet@b0000 {
 	fsl,num_tx_queues = <0x8>;
 	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
 
 	queue-group@b0000 {
 		#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
index 221cd2e..9f25427 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
@@ -50,6 +50,7 @@ ethernet@b1000 {
 	fsl,num_tx_queues = <0x8>;
 	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
 
 	queue-group@b1000 {
 		#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
index 61456c3..cd7c318 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
@@ -49,6 +49,7 @@ ethernet@b2000 {
 	fsl,num_tx_queues = <0x8>;
 	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
 
 	queue-group@b2000 {
 		#address-cells = <1>;
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 89dde17..55551a8 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -111,7 +111,7 @@ static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev)
 		res->name = pci_name(dev);
 		region.start = base;
 		region.end = base + size - 1;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 	}
 }
 
@@ -276,7 +276,7 @@ void __devinit of_scan_pci_bridge(struct pci_dev *dev)
 		res->flags = flags;
 		region.start = of_read_number(&ranges[1], 2);
 		region.end = region.start + size - 1;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 	}
 	sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
 		bus->number);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 5da8e8d..79a17f7 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -392,7 +392,7 @@ static void __devinit pnv_ioda_setup_pe_segments(struct pci_dev *dev)
 
 	/* Setup IO segments */
 	if (io_res.start < io_res.end) {
-		pcibios_resource_to_bus(dev, &region, &io_res);
+		pcibios_resource_to_bus(dev->bus, &region, &io_res);
 		pos = region.start;
 		i = pos / phb->ioda.io_segsize;
 		while(i < phb->ioda.total_pe && pos <= region.end) {
@@ -422,7 +422,7 @@ static void __devinit pnv_ioda_setup_pe_segments(struct pci_dev *dev)
 
 	/* Setup M32 segments */
 	if (m32_res.start < m32_res.end) {
-		pcibios_resource_to_bus(dev, &region, &m32_res);
+		pcibios_resource_to_bus(dev->bus, &region, &m32_res);
 		pos = region.start;
 		i = pos / phb->ioda.m32_segsize;
 		while(i < phb->ioda.total_pe && pos <= region.end) {
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 1c16141..1fea249 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -155,7 +155,7 @@ axon_ram_direct_access(struct block_device *device, sector_t sector,
 	}
 
 	*kaddr = (void *)(bank->ph_addr + offset);
-	*pfn = virt_to_phys(kaddr) >> PAGE_SHIFT;
+	*pfn = virt_to_phys(*kaddr) >> PAGE_SHIFT;
 
 	return 0;
 }
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 0f250d1..7e6ac1f 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -347,7 +347,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 	vcpu->arch.sie_block->ecb   = 6;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
 	vcpu->arch.sie_block->fac   = (int) (long) facilities;
-	hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+	hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet,
 		     (unsigned long) vcpu);
 	vcpu->arch.ckc_timer.function = kvm_s390_idle_wakeup;
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 8c5c9a5..ab5f471 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -409,7 +409,7 @@ static void __devinit pci_cfg_fake_ranges(struct pci_dev *dev,
 		res2.flags = res->flags;
 		region.start = base;
 		region.end = limit + 0xfff;
-		pcibios_bus_to_resource(dev, &res2, &region);
+		pcibios_bus_to_resource(dev->bus, &res2, &region);
 		if (!res->start)
 			res->start = res2.start;
 		if (!res->end)
@@ -427,7 +427,7 @@ static void __devinit pci_cfg_fake_ranges(struct pci_dev *dev,
 			      IORESOURCE_MEM);
 		region.start = base;
 		region.end = limit + 0xfffff;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 	}
 
 	pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
@@ -458,7 +458,7 @@ static void __devinit pci_cfg_fake_ranges(struct pci_dev *dev,
 			      IORESOURCE_MEM | IORESOURCE_PREFETCH);
 		region.start = base;
 		region.end = limit + 0xfffff;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 	}
 }
 
@@ -480,7 +480,7 @@ static void __devinit apb_fake_ranges(struct pci_dev *dev,
 	res->flags = IORESOURCE_IO;
 	region.start = (first << 21);
 	region.end = (last << 21) + ((1 << 21) - 1);
-	pcibios_bus_to_resource(dev, res, &region);
+	pcibios_bus_to_resource(dev->bus, res, &region);
 
 	pci_read_config_byte(dev, APB_MEM_ADDRESS_MAP, &map);
 	apb_calc_first_last(map, &first, &last);
@@ -488,7 +488,7 @@ static void __devinit apb_fake_ranges(struct pci_dev *dev,
 	res->flags = IORESOURCE_MEM;
 	region.start = (first << 29);
 	region.end = (last << 29) + ((1 << 29) - 1);
-	pcibios_bus_to_resource(dev, res, &region);
+	pcibios_bus_to_resource(dev->bus, res, &region);
 }
 
 static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm,
@@ -579,7 +579,7 @@ static void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm,
 		res->flags = flags;
 		region.start = GET_64BIT(ranges, 1);
 		region.end = region.start + size - 1;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 	}
 after_ranges:
 	sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 917c109..eda8cb9 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -129,7 +129,7 @@ config SBUS
 	bool
 
 config NEED_DMA_MAP_STATE
-       def_bool (X86_64 || INTEL_IOMMU || DMA_API_DEBUG)
+       def_bool (X86_64 || INTEL_IOMMU || DMA_API_DEBUG || SWIOTLB)
 
 config NEED_SG_DMA_LENGTH
 	def_bool y
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index c799352..51afabd 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -1203,7 +1203,7 @@ static int __driver_rfc4106_decrypt(struct aead_request *req)
 		src = kmalloc(req->cryptlen + req->assoclen, GFP_ATOMIC);
 		if (!src)
 			return -ENOMEM;
-		assoc = (src + req->cryptlen + auth_tag_len);
+		assoc = (src + req->cryptlen);
 		scatterwalk_map_and_copy(src, req->src, 0, req->cryptlen, 0);
 		scatterwalk_map_and_copy(assoc, req->assoc, 0,
 			req->assoclen, 0);
@@ -1228,7 +1228,7 @@ static int __driver_rfc4106_decrypt(struct aead_request *req)
 		scatterwalk_done(&src_sg_walk, 0, 0);
 		scatterwalk_done(&assoc_sg_walk, 0, 0);
 	} else {
-		scatterwalk_map_and_copy(dst, req->dst, 0, req->cryptlen, 1);
+		scatterwalk_map_and_copy(dst, req->dst, 0, tempCipherLen, 1);
 		kfree(src);
 	}
 	return retval;
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 45f9c70..8b49131 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -414,11 +414,14 @@ ENTRY(ret_from_fork)
 	testl $3, CS-ARGOFFSET(%rsp)		# from kernel_thread?
 	jz   retint_restore_args
 
-	testl $_TIF_IA32, TI_flags(%rcx)	# 32-bit compat task needs IRET
-	jnz  int_ret_from_sys_call
-
-	RESTORE_TOP_OF_STACK %rdi, -ARGOFFSET
-	jmp ret_from_sys_call			# go to the SYSRET fastpath
+	/*
+	 * By the time we get here, we have no idea whether our pt_regs,
+	 * ti flags, and ti status came from the 64-bit SYSCALL fast path,
+	 * the slow path, or one of the ia32entry paths.
+	 * Use int_ret_from_sys_call to return, since it can safely handle
+	 * all of the above.
+	 */
+	jmp  int_ret_from_sys_call
 
 	CFI_ENDPROC
 END(ret_from_fork)
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d398f31..310cb01 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -439,6 +439,17 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"),
 		},
 	},
+
+	/* ASRock */
+	{	/* Handle problems with rebooting on ASRock Q1900DC-ITX */
+		.callback = set_pci_reboot,
+		.ident = "ASRock Q1900DC-ITX",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASRock"),
+			DMI_MATCH(DMI_BOARD_NAME, "Q1900DC-ITX"),
+		},
+	},
+
 	{	/* Handle problems with rebooting on the Latitude E6320. */
 		.callback = set_pci_reboot,
 		.ident = "Dell Latitude E6320",
@@ -690,9 +701,12 @@ void native_machine_shutdown(void)
 	/* Make certain I only run on the appropriate processor */
 	set_cpus_allowed_ptr(current, cpumask_of(reboot_cpu_id));
 
-	/* O.K Now that I'm on the appropriate processor,
-	 * stop all of the others.
+	/*
+	 * O.K Now that I'm on the appropriate processor, stop all of the
+	 * others. Also disable the local irq to not receive the per-cpu
+	 * timer interrupt which may trigger scheduler's load balance.
 	 */
+	local_irq_disable();
 	stop_other_cpus();
 #endif
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 9bfe95f..adc049f 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -435,7 +435,7 @@ dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 	 * then it's very likely the result of an icebp/int01 trap.
 	 * User wants a sigtrap for that.
 	 */
-	if (!dr6 && user_mode(regs))
+	if (!dr6 && user_mode_vm(regs))
 		user_icebp = 1;
 
 	/* Catch kmemcheck conditions first of all! */
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 91e8680..db08e66 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -4246,7 +4246,8 @@ int x86_emulate_insn(struct x86_emulate_ctxt *ctxt)
 		if (rc != X86EMUL_CONTINUE)
 			goto done;
 	}
-	ctxt->dst.orig_val = ctxt->dst.val;
+	/* Copy full 64-bit value for CMPXCHG8B.  */
+	ctxt->dst.orig_val64 = ctxt->dst.val64;
 
 special_insn:
 
diff --git a/arch/x86/vdso/vdso32/sigreturn.S b/arch/x86/vdso/vdso32/sigreturn.S
index 31776d0..d7ec4e2 100644
--- a/arch/x86/vdso/vdso32/sigreturn.S
+++ b/arch/x86/vdso/vdso32/sigreturn.S
@@ -17,6 +17,7 @@
 	.text
 	.globl __kernel_sigreturn
 	.type __kernel_sigreturn,@function
+	nop /* this guy is needed for .LSTARTFDEDLSI1 below (watch for HACK) */
 	ALIGN
 __kernel_sigreturn:
 .LSTART_sigreturn:
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 8c5ad89..89cff37 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1872,6 +1872,17 @@ EXPORT_SYMBOL(acpi_video_unregister);
 
 static int __init acpi_video_init(void)
 {
+	/*
+	 * Let the module load even if ACPI is disabled (e.g. due to
+	 * a broken BIOS) so that i915.ko can still be loaded on such
+	 * old systems without an AcpiOpRegion.
+	 *
+	 * acpi_video_register() will report -ENODEV later as well due
+	 * to acpi_disabled when i915.ko tries to register itself afterwards.
+	 */
+	if (acpi_disabled)
+		return 0;
+
 	dmi_check_system(video_dmi_table);
 
 	if (intel_opregion_present())
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 35fc569..eac3705 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -773,10 +773,6 @@ static int __init nbd_init(void)
 		return -EINVAL;
 	}
 
-	nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
-	if (!nbd_dev)
-		return -ENOMEM;
-
 	part_shift = 0;
 	if (max_part > 0) {
 		part_shift = fls(max_part);
@@ -798,6 +794,10 @@ static int __init nbd_init(void)
 	if (nbds_max > 1UL << (MINORBITS - part_shift))
 		return -EINVAL;
 
+	nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
+	if (!nbd_dev)
+		return -ENOMEM;
+
 	for (i = 0; i < nbds_max; i++) {
 		struct gendisk *disk = alloc_disk(1 << part_shift);
 		if (!disk)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 02fbbf7..8a084bf 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -101,6 +101,7 @@ static struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3393) },
 	{ USB_DEVICE(0x13d3, 0x3402) },
 	{ USB_DEVICE(0x13d3, 0x3408) },
+	{ USB_DEVICE(0x13d3, 0x3423) },
 	{ USB_DEVICE(0x13d3, 0x3432) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
@@ -149,6 +150,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index ddb2b87..7c0b21e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -179,6 +179,7 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index a81f469..96f4a50 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -124,6 +124,7 @@ struct ports_device {
 	 * notification
 	 */
 	struct work_struct control_work;
+	struct work_struct config_work;
 
 	struct list_head ports;
 
@@ -1555,10 +1556,21 @@ static void config_intr(struct virtio_device *vdev)
 
 	portdev = vdev->priv;
 
+	if (!use_multiport(portdev))
+		schedule_work(&portdev->config_work);
+}
+
+static void config_work_handler(struct work_struct *work)
+{
+	struct ports_device *portdev;
+
+	portdev = container_of(work, struct ports_device, control_work);
 	if (!use_multiport(portdev)) {
+		struct virtio_device *vdev;
 		struct port *port;
 		u16 rows, cols;
 
+		vdev = portdev->vdev;
 		vdev->config->get(vdev,
 				  offsetof(struct virtio_console_config, cols),
 				  &cols, sizeof(u16));
@@ -1752,12 +1764,14 @@ static int __devinit virtcons_probe(struct virtio_device *vdev)
 	spin_lock_init(&portdev->ports_lock);
 	INIT_LIST_HEAD(&portdev->ports);
 
+	INIT_WORK(&portdev->config_work, &config_work_handler);
+	INIT_WORK(&portdev->control_work, &control_work_handler);
+
 	if (multiport) {
 		unsigned int nr_added_bufs;
 
 		spin_lock_init(&portdev->c_ivq_lock);
 		spin_lock_init(&portdev->c_ovq_lock);
-		INIT_WORK(&portdev->control_work, &control_work_handler);
 
 		nr_added_bufs = fill_queue(portdev->c_ivq,
 					   &portdev->c_ivq_lock);
@@ -1825,6 +1839,8 @@ static void virtcons_remove(struct virtio_device *vdev)
 	/* Finish up work that's lined up */
 	if (use_multiport(portdev))
 		cancel_work_sync(&portdev->control_work);
+	else
+		cancel_work_sync(&portdev->config_work);
 
 	list_for_each_entry_safe(port, port2, &portdev->ports, list)
 		unplug_port(port);
@@ -1866,6 +1882,7 @@ static int virtcons_freeze(struct virtio_device *vdev)
 
 	virtqueue_disable_cb(portdev->c_ivq);
 	cancel_work_sync(&portdev->control_work);
+	cancel_work_sync(&portdev->config_work);
 	/*
 	 * Once more: if control_work_handler() was running, it would
 	 * enable the cb as the last step.
diff --git a/drivers/cpufreq/speedstep-lib.c b/drivers/cpufreq/speedstep-lib.c
index 7047821..4ab7a21 100644
--- a/drivers/cpufreq/speedstep-lib.c
+++ b/drivers/cpufreq/speedstep-lib.c
@@ -400,6 +400,7 @@ unsigned int speedstep_get_freqs(enum speedstep_processor processor,
 
 	pr_debug("previous speed is %u\n", prev_speed);
 
+	preempt_disable();
 	local_irq_save(flags);
 
 	/* switch to low state */
@@ -464,6 +465,8 @@ unsigned int speedstep_get_freqs(enum speedstep_processor processor,
 
 out:
 	local_irq_restore(flags);
+	preempt_enable();
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(speedstep_get_freqs);
diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c
index 6a457fc..b01926d 100644
--- a/drivers/cpufreq/speedstep-smi.c
+++ b/drivers/cpufreq/speedstep-smi.c
@@ -188,6 +188,7 @@ static void speedstep_set_state(unsigned int state)
 		return;
 
 	/* Disable IRQs */
+	preempt_disable();
 	local_irq_save(flags);
 
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
@@ -198,9 +199,19 @@ static void speedstep_set_state(unsigned int state)
 
 	do {
 		if (retry) {
+			/*
+			 * We need to enable interrupts, otherwise the blockage
+			 * won't resolve.
+			 *
+			 * We disable preemption so that other processes don't
+			 * run. If other processes were running, they could
+			 * submit more DMA requests, making the blockage worse.
+			 */
 			pr_debug("retry %u, previous result %u, waiting...\n",
 					retry, result);
+			local_irq_enable();
 			mdelay(retry * 50);
+			local_irq_disable();
 		}
 		retry++;
 		__asm__ __volatile__(
@@ -217,6 +228,7 @@ static void speedstep_set_state(unsigned int state)
 
 	/* enable IRQs */
 	local_irq_restore(flags);
+	preempt_enable();
 
 	if (new_state == state)
 		pr_debug("change to %u MHz succeeded after %u tries "
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index 0924c30..593ff71 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -672,7 +672,7 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 	u32 reg;
 	u64 limit, prv = 0;
 	u64 tmp_mb;
-	u32 mb, kb;
+	u32 gb, mb;
 	u32 rir_way;
 
 	/*
@@ -685,9 +685,9 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 	pvt->tolm = GET_TOLM(reg);
 	tmp_mb = (1 + pvt->tolm) >> 20;
 
-	mb = div_u64_rem(tmp_mb, 1000, &kb);
-	debugf0("TOLM: %u.%03u GB (0x%016Lx)\n",
-		mb, kb, (u64)pvt->tolm);
+	gb = div_u64_rem(tmp_mb, 1024, &mb);
+	debugf0("TOHM: %u.%03u GB (0x%016Lx)\n",
+		gb, (mb*1000)/1024, (u64)pvt->tohm);
 
 	/* Address range is already 45:25 */
 	pci_read_config_dword(pvt->pci_sad1, TOHM,
@@ -695,9 +695,9 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 	pvt->tohm = GET_TOHM(reg);
 	tmp_mb = (1 + pvt->tohm) >> 20;
 
-	mb = div_u64_rem(tmp_mb, 1000, &kb);
+	gb = div_u64_rem(tmp_mb, 1024, &mb);
 	debugf0("TOHM: %u.%03u GB (0x%016Lx)",
-		mb, kb, (u64)pvt->tohm);
+		gb, (mb*1000)/1024, (u64)pvt->tohm);
 
 	/*
 	 * Step 2) Get SAD range and SAD Interleave list
@@ -719,11 +719,11 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 			break;
 
 		tmp_mb = (limit + 1) >> 20;
-		mb = div_u64_rem(tmp_mb, 1000, &kb);
+		gb = div_u64_rem(tmp_mb, 1000, &mb);
 		debugf0("SAD#%d %s up to %u.%03u GB (0x%016Lx) %s reg=0x%08x\n",
 			n_sads,
 			get_dram_attr(reg),
-			mb, kb,
+			gb, (mb*1000)/1024,
 			((u64)tmp_mb) << 20L,
 			INTERLEAVE_MODE(reg) ? "Interleave: 8:6" : "Interleave: [8:6]XOR[18:16]",
 			reg);
@@ -753,9 +753,9 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 			break;
 		tmp_mb = (limit + 1) >> 20;
 
-		mb = div_u64_rem(tmp_mb, 1000, &kb);
+		gb = div_u64_rem(tmp_mb, 1000, &mb);
 		debugf0("TAD#%d: up to %u.%03u GB (0x%016Lx), socket interleave %d, memory interleave %d, TGT: %d, %d, %d, %d, reg=0x%08x\n",
-			n_tads, mb, kb,
+			n_tads, gb, (mb*1000)/1024,
 			((u64)tmp_mb) << 20L,
 			(u32)TAD_SOCK(reg),
 			(u32)TAD_CH(reg),
@@ -778,10 +778,10 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 					      tad_ch_nilv_offset[j],
 					      &reg);
 			tmp_mb = TAD_OFFSET(reg) >> 20;
-			mb = div_u64_rem(tmp_mb, 1000, &kb);
+			gb = div_u64_rem(tmp_mb, 1024, &mb);
 			debugf0("TAD CH#%d, offset #%d: %u.%03u GB (0x%016Lx), reg=0x%08x\n",
 				i, j,
-				mb, kb,
+				gb, (mb*1000)/1024,
 				((u64)tmp_mb) << 20L,
 				reg);
 		}
@@ -803,10 +803,10 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 
 			tmp_mb = RIR_LIMIT(reg) >> 20;
 			rir_way = 1 << RIR_WAY(reg);
-			mb = div_u64_rem(tmp_mb, 1000, &kb);
+			gb = div_u64_rem(tmp_mb, 1024, &mb);
 			debugf0("CH#%d RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d, reg=0x%08x\n",
 				i, j,
-				mb, kb,
+				gb, (mb*1000)/1024,
 				((u64)tmp_mb) << 20L,
 				rir_way,
 				reg);
@@ -817,10 +817,10 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 						      &reg);
 				tmp_mb = RIR_OFFSET(reg) << 6;
 
-				mb = div_u64_rem(tmp_mb, 1000, &kb);
+				gb = div_u64_rem(tmp_mb, 1024, &mb);
 				debugf0("CH#%d RIR#%d INTL#%d, offset %u.%03u GB (0x%016Lx), tgt: %d, reg=0x%08x\n",
 					i, j, k,
-					mb, kb,
+					gb, (mb*1000)/1024,
 					((u64)tmp_mb) << 20L,
 					(u32)RIR_RNK_TGT(reg),
 					reg);
@@ -858,7 +858,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
 	u8			ch_way,sck_way;
 	u32			tad_offset;
 	u32			rir_way;
-	u32			mb, kb;
+	u32			gb, mb;
 	u64			ch_addr, offset, limit, prv = 0;
 
 
@@ -1084,10 +1084,10 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
 			continue;
 
 		limit = RIR_LIMIT(reg);
-		mb = div_u64_rem(limit >> 20, 1000, &kb);
+		gb = div_u64_rem(limit >> 20, 1024, &mb);
 		debugf0("RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d\n",
 			n_rir,
-			mb, kb,
+			gb, (mb*1000)/1024,
 			limit,
 			1 << RIR_WAY(reg));
 		if  (ch_addr <= limit)
diff --git a/drivers/gpio/gpio-tps65912.c b/drivers/gpio/gpio-tps65912.c
index 79e66c0..2712680 100644
--- a/drivers/gpio/gpio-tps65912.c
+++ b/drivers/gpio/gpio-tps65912.c
@@ -26,9 +26,12 @@ struct tps65912_gpio_data {
 	struct gpio_chip gpio_chip;
 };
 
+#define to_tgd(gc) container_of(gc, struct tps65912_gpio_data, gpio_chip)
+
 static int tps65912_gpio_get(struct gpio_chip *gc, unsigned offset)
 {
-	struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+	struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+	struct tps65912 *tps65912 = tps65912_gpio->tps65912;
 	int val;
 
 	val = tps65912_reg_read(tps65912, TPS65912_GPIO1 + offset);
@@ -42,7 +45,8 @@ static int tps65912_gpio_get(struct gpio_chip *gc, unsigned offset)
 static void tps65912_gpio_set(struct gpio_chip *gc, unsigned offset,
 			      int value)
 {
-	struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+	struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+	struct tps65912 *tps65912 = tps65912_gpio->tps65912;
 
 	if (value)
 		tps65912_set_bits(tps65912, TPS65912_GPIO1 + offset,
@@ -55,7 +59,8 @@ static void tps65912_gpio_set(struct gpio_chip *gc, unsigned offset,
 static int tps65912_gpio_output(struct gpio_chip *gc, unsigned offset,
 				int value)
 {
-	struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+	struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+	struct tps65912 *tps65912 = tps65912_gpio->tps65912;
 
 	/* Set the initial value */
 	tps65912_gpio_set(gc, offset, value);
@@ -66,7 +71,8 @@ static int tps65912_gpio_output(struct gpio_chip *gc, unsigned offset,
 
 static int tps65912_gpio_input(struct gpio_chip *gc, unsigned offset)
 {
-	struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+	struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+	struct tps65912 *tps65912 = tps65912_gpio->tps65912;
 
 	return tps65912_clear_bits(tps65912, TPS65912_GPIO1 + offset,
 								GPIO_CFG_MASK);
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 8d1724c..5325c20 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -777,10 +777,8 @@ static int radeon_dp_link_train_init(struct radeon_dp_link_train_info *dp_info)
 		radeon_write_dpcd_reg(dp_info->radeon_connector,
 				      DP_DOWNSPREAD_CTRL, 0);
 
-	if ((dp_info->connector->connector_type == DRM_MODE_CONNECTOR_eDP) &&
-	    (dig->panel_mode == DP_PANEL_MODE_INTERNAL_DP2_MODE)) {
+	if (dig->panel_mode == DP_PANEL_MODE_INTERNAL_DP2_MODE)
 		radeon_write_dpcd_reg(dp_info->radeon_connector, DP_EDP_CONFIGURATION_SET, 1);
-	}
 
 	/* set the lane count on the sink */
 	tmp = dp_info->dp_lane_count;
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 01434ef..c5fe79e 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -3474,6 +3474,9 @@ int evergreen_init(struct radeon_device *rdev)
 		}
 	}
 
+	/* posting read */
+	RREG32(SRBM_STATUS);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 40ed0e5..8ec5b85 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -726,6 +726,10 @@ int r100_irq_set(struct radeon_device *rdev)
 		tmp |= RADEON_FP2_DETECT_MASK;
 	}
 	WREG32(RADEON_GEN_INT_CNTL, tmp);
+
+	/* read back to post the write */
+	RREG32(RADEON_GEN_INT_CNTL);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 1555cd6..9c7062d 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -3184,6 +3184,9 @@ int r600_irq_set(struct radeon_device *rdev)
 		WREG32(DC_HOT_PLUG_DETECT3_INT_CONTROL, hpd3);
 	}
 
+	/* posting read */
+	RREG32(R_000E50_SRBM_STATUS);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index d306cc8..ef56e4e 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -76,7 +76,7 @@ static bool igp_read_bios_from_vram(struct radeon_device *rdev)
 
 static bool radeon_read_bios(struct radeon_device *rdev)
 {
-	uint8_t __iomem *bios;
+	uint8_t __iomem *bios, val1, val2;
 	size_t size;
 
 	rdev->bios = NULL;
@@ -86,15 +86,19 @@ static bool radeon_read_bios(struct radeon_device *rdev)
 		return false;
 	}
 
-	if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) {
+	val1 = readb(&bios[0]);
+	val2 = readb(&bios[1]);
+
+	if (size == 0 || val1 != 0x55 || val2 != 0xaa) {
 		pci_unmap_rom(rdev->pdev, bios);
 		return false;
 	}
-	rdev->bios = kmemdup(bios, size, GFP_KERNEL);
+	rdev->bios = kzalloc(size, GFP_KERNEL);
 	if (rdev->bios == NULL) {
 		pci_unmap_rom(rdev->pdev, bios);
 		return false;
 	}
+	memcpy_fromio(rdev->bios, bios, size);
 	pci_unmap_rom(rdev->pdev, bios);
 	return true;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index cf723c4..f3ee360 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -167,11 +167,13 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data)
 	u32 ring = RADEON_CS_RING_GFX;
 	s32 priority = 0;
 
+	INIT_LIST_HEAD(&p->validated);
+
 	if (!cs->num_chunks) {
 		return 0;
 	}
+
 	/* get chunks */
-	INIT_LIST_HEAD(&p->validated);
 	p->idx = 0;
 	p->chunk_ib_idx = -1;
 	p->chunk_relocs_idx = -1;
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 739eb0d..07b6dbf 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -585,6 +585,10 @@ int rs600_irq_set(struct radeon_device *rdev)
 	WREG32(R_006540_DxMODE_INT_MASK, mode_int);
 	WREG32(R_007D08_DC_HOT_PLUG_DETECT1_INT_CONTROL, hpd1);
 	WREG32(R_007D18_DC_HOT_PLUG_DETECT2_INT_CONTROL, hpd2);
+
+	/* posting read */
+	RREG32(R_000040_GEN_INT_CNTL);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index e710073..068b21f 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -4126,6 +4126,9 @@ int si_init(struct radeon_device *rdev)
 		return -EINVAL;
 	}
 
+	/* posting read */
+	RREG32(SRBM_STATUS);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index db50604..e43341a 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -547,21 +547,6 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 		goto out_err1;
 	}
 
-	ret = ttm_bo_init_mm(&dev_priv->bdev, TTM_PL_VRAM,
-			     (dev_priv->vram_size >> PAGE_SHIFT));
-	if (unlikely(ret != 0)) {
-		DRM_ERROR("Failed initializing memory manager for VRAM.\n");
-		goto out_err2;
-	}
-
-	dev_priv->has_gmr = true;
-	if (ttm_bo_init_mm(&dev_priv->bdev, VMW_PL_GMR,
-			   dev_priv->max_gmr_ids) != 0) {
-		DRM_INFO("No GMR memory available. "
-			 "Graphics memory resources are very limited.\n");
-		dev_priv->has_gmr = false;
-	}
-
 	dev_priv->mmio_mtrr = drm_mtrr_add(dev_priv->mmio_start,
 					   dev_priv->mmio_size, DRM_MTRR_WC);
 
@@ -618,6 +603,22 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 	ret = vmw_3d_resource_inc(dev_priv, true);
 	if (unlikely(ret != 0))
 		goto out_no_fifo;
+
+	ret = ttm_bo_init_mm(&dev_priv->bdev, TTM_PL_VRAM,
+			     (dev_priv->vram_size >> PAGE_SHIFT));
+	if (unlikely(ret != 0)) {
+		DRM_ERROR("Failed initializing memory manager for VRAM.\n");
+		goto out_no_vram;
+	}
+
+	dev_priv->has_gmr = true;
+	if (ttm_bo_init_mm(&dev_priv->bdev, VMW_PL_GMR,
+			   dev_priv->max_gmr_ids) != 0) {
+		DRM_INFO("No GMR memory available. "
+			 "Graphics memory resources are very limited.\n");
+		dev_priv->has_gmr = false;
+	}
+
 	vmw_kms_save_vga(dev_priv);
 
 	/* Start kms and overlay systems, needs fifo. */
@@ -663,6 +664,10 @@ out_no_kms:
 		vmw_kms_restore_vga(dev_priv);
 		vmw_3d_resource_dec(dev_priv, false);
 	}
+out_no_vram:
+	if (dev_priv->has_gmr)
+		(void) ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_GMR);
+	(void)ttm_bo_clean_mm(&dev_priv->bdev, TTM_PL_VRAM);
 out_no_fifo:
 	vmw_fence_manager_takedown(dev_priv->fman);
 out_no_fman:
@@ -677,9 +682,6 @@ out_err4:
 out_err3:
 	drm_mtrr_del(dev_priv->mmio_mtrr, dev_priv->mmio_start,
 		     dev_priv->mmio_size, DRM_MTRR_WC);
-	if (dev_priv->has_gmr)
-		(void) ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_GMR);
-	(void)ttm_bo_clean_mm(&dev_priv->bdev, TTM_PL_VRAM);
 out_err2:
 	(void)ttm_bo_device_release(&dev_priv->bdev);
 out_err1:
@@ -709,6 +711,11 @@ static int vmw_driver_unload(struct drm_device *dev)
 	}
 	vmw_kms_close(dev_priv);
 	vmw_overlay_close(dev_priv);
+
+	if (dev_priv->has_gmr)
+		(void)ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_GMR);
+	(void)ttm_bo_clean_mm(&dev_priv->bdev, TTM_PL_VRAM);
+
 	vmw_fence_manager_takedown(dev_priv->fman);
 	if (dev_priv->stealth)
 		pci_release_region(dev->pdev, 2);
@@ -719,9 +726,6 @@ static int vmw_driver_unload(struct drm_device *dev)
 	iounmap(dev_priv->mmio_virt);
 	drm_mtrr_del(dev_priv->mmio_mtrr, dev_priv->mmio_start,
 		     dev_priv->mmio_size, DRM_MTRR_WC);
-	if (dev_priv->has_gmr)
-		(void)ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_GMR);
-	(void)ttm_bo_clean_mm(&dev_priv->bdev, TTM_PL_VRAM);
 	(void)ttm_bo_device_release(&dev_priv->bdev);
 	vmw_ttm_global_release(dev_priv);
 	idr_destroy(&dev_priv->surface_idr);
diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index a841123..d0254be 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -94,6 +94,14 @@ struct ib_umem *ib_umem_get(struct ib_ucontext *context, unsigned long addr,
 	if (dmasync)
 		dma_set_attr(DMA_ATTR_WRITE_BARRIER, &attrs);
 
+	/*
+	 * If the combination of the addr and size requested for this memory
+	 * region causes an integer overflow, return error.
+	 */
+	if (((addr + size) < addr) ||
+	    PAGE_ALIGN(addr + size) < (addr + size))
+		return ERR_PTR(-EINVAL);
+
 	if (!can_do_mlock())
 		return ERR_PTR(-EPERM);
 
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index 604556d..5b51e4e 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -451,6 +451,7 @@ static void ib_uverbs_async_handler(struct ib_uverbs_file *file,
 
 	entry->desc.async.element    = element;
 	entry->desc.async.event_type = event;
+	entry->desc.async.reserved   = 0;
 	entry->counter               = counter;
 
 	list_add_tail(&entry->list, &file->async_file->event_list);
diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c
index 259b067..df76538 100644
--- a/drivers/infiniband/hw/mlx4/mad.c
+++ b/drivers/infiniband/hw/mlx4/mad.c
@@ -44,6 +44,14 @@ enum {
 	MLX4_IB_VENDOR_CLASS2 = 0xa
 };
 
+/* Counters should be saturate once they reach their maximum value */
+#define ASSIGN_32BIT_COUNTER(counter, value) do {\
+	if ((value) > (u32)~0U)			 \
+		counter = cpu_to_be32((u32)~0U); \
+	else					 \
+		counter = cpu_to_be32(value);	 \
+} while (0)
+
 int mlx4_MAD_IFC(struct mlx4_ib_dev *dev, int ignore_mkey, int ignore_bkey,
 		 int port, struct ib_wc *in_wc, struct ib_grh *in_grh,
 		 void *in_mad, void *response_mad)
@@ -304,10 +312,14 @@ static int ib_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
 static void edit_counter(struct mlx4_counter *cnt,
 					struct ib_pma_portcounters *pma_cnt)
 {
-	pma_cnt->port_xmit_data = cpu_to_be32((be64_to_cpu(cnt->tx_bytes)>>2));
-	pma_cnt->port_rcv_data  = cpu_to_be32((be64_to_cpu(cnt->rx_bytes)>>2));
-	pma_cnt->port_xmit_packets = cpu_to_be32(be64_to_cpu(cnt->tx_frames));
-	pma_cnt->port_rcv_packets  = cpu_to_be32(be64_to_cpu(cnt->rx_frames));
+	ASSIGN_32BIT_COUNTER(pma_cnt->port_xmit_data,
+			     (be64_to_cpu(cnt->tx_bytes) >> 2));
+	ASSIGN_32BIT_COUNTER(pma_cnt->port_rcv_data,
+			     (be64_to_cpu(cnt->rx_bytes) >> 2));
+	ASSIGN_32BIT_COUNTER(pma_cnt->port_xmit_packets,
+			     be64_to_cpu(cnt->tx_frames));
+	ASSIGN_32BIT_COUNTER(pma_cnt->port_rcv_packets,
+			     be64_to_cpu(cnt->rx_frames));
 }
 
 static int iboe_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index 6b811e3..c7d4ef1 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -1013,12 +1013,6 @@ struct qib_devdata {
 	/* control high-level access to EEPROM */
 	struct mutex eep_lock;
 	uint64_t traffic_wds;
-	/* active time is kept in seconds, but logged in hours */
-	atomic_t active_time;
-	/* Below are nominal shadow of EEPROM, new since last EEPROM update */
-	uint8_t eep_st_errs[QIB_EEP_LOG_CNT];
-	uint8_t eep_st_new_errs[QIB_EEP_LOG_CNT];
-	uint16_t eep_hrs;
 	/*
 	 * masks for which bits of errs, hwerrs that cause
 	 * each of the counters to increment.
@@ -1235,8 +1229,7 @@ int qib_twsi_blk_rd(struct qib_devdata *dd, int dev, int addr, void *buffer,
 int qib_twsi_blk_wr(struct qib_devdata *dd, int dev, int addr,
 		    const void *buffer, int len);
 void qib_get_eeprom_info(struct qib_devdata *);
-int qib_update_eeprom_log(struct qib_devdata *dd);
-void qib_inc_eeprom_err(struct qib_devdata *dd, u32 eidx, u32 incr);
+#define qib_inc_eeprom_err(dd, eidx, incr)
 void qib_dump_lookup_output_queue(struct qib_devdata *);
 void qib_force_pio_avail_update(struct qib_devdata *);
 void qib_clear_symerror_on_linkup(unsigned long opaque);
diff --git a/drivers/infiniband/hw/qib/qib_eeprom.c b/drivers/infiniband/hw/qib/qib_eeprom.c
index 92d9cfe..161ef71 100644
--- a/drivers/infiniband/hw/qib/qib_eeprom.c
+++ b/drivers/infiniband/hw/qib/qib_eeprom.c
@@ -263,189 +263,8 @@ void qib_get_eeprom_info(struct qib_devdata *dd)
 		qib_dev_err(dd, "Board SN %s did not pass functional "
 			    "test: %s\n", dd->serial, ifp->if_comment);
 
-	memcpy(&dd->eep_st_errs, &ifp->if_errcntp, QIB_EEP_LOG_CNT);
-	/*
-	 * Power-on (actually "active") hours are kept as little-endian value
-	 * in EEPROM, but as seconds in a (possibly as small as 24-bit)
-	 * atomic_t while running.
-	 */
-	atomic_set(&dd->active_time, 0);
-	dd->eep_hrs = ifp->if_powerhour[0] | (ifp->if_powerhour[1] << 8);
-
 done:
 	vfree(buf);
 
 bail:;
 }
-
-/**
- * qib_update_eeprom_log - copy active-time and error counters to eeprom
- * @dd: the qlogic_ib device
- *
- * Although the time is kept as seconds in the qib_devdata struct, it is
- * rounded to hours for re-write, as we have only 16 bits in EEPROM.
- * First-cut code reads whole (expected) struct qib_flash, modifies,
- * re-writes. Future direction: read/write only what we need, assuming
- * that the EEPROM had to have been "good enough" for driver init, and
- * if not, we aren't making it worse.
- *
- */
-int qib_update_eeprom_log(struct qib_devdata *dd)
-{
-	void *buf;
-	struct qib_flash *ifp;
-	int len, hi_water;
-	uint32_t new_time, new_hrs;
-	u8 csum;
-	int ret, idx;
-	unsigned long flags;
-
-	/* first, check if we actually need to do anything. */
-	ret = 0;
-	for (idx = 0; idx < QIB_EEP_LOG_CNT; ++idx) {
-		if (dd->eep_st_new_errs[idx]) {
-			ret = 1;
-			break;
-		}
-	}
-	new_time = atomic_read(&dd->active_time);
-
-	if (ret == 0 && new_time < 3600)
-		goto bail;
-
-	/*
-	 * The quick-check above determined that there is something worthy
-	 * of logging, so get current contents and do a more detailed idea.
-	 * read full flash, not just currently used part, since it may have
-	 * been written with a newer definition
-	 */
-	len = sizeof(struct qib_flash);
-	buf = vmalloc(len);
-	ret = 1;
-	if (!buf) {
-		qib_dev_err(dd, "Couldn't allocate memory to read %u "
-			    "bytes from eeprom for logging\n", len);
-		goto bail;
-	}
-
-	/* Grab semaphore and read current EEPROM. If we get an
-	 * error, let go, but if not, keep it until we finish write.
-	 */
-	ret = mutex_lock_interruptible(&dd->eep_lock);
-	if (ret) {
-		qib_dev_err(dd, "Unable to acquire EEPROM for logging\n");
-		goto free_bail;
-	}
-	ret = qib_twsi_blk_rd(dd, dd->twsi_eeprom_dev, 0, buf, len);
-	if (ret) {
-		mutex_unlock(&dd->eep_lock);
-		qib_dev_err(dd, "Unable read EEPROM for logging\n");
-		goto free_bail;
-	}
-	ifp = (struct qib_flash *)buf;
-
-	csum = flash_csum(ifp, 0);
-	if (csum != ifp->if_csum) {
-		mutex_unlock(&dd->eep_lock);
-		qib_dev_err(dd, "EEPROM cks err (0x%02X, S/B 0x%02X)\n",
-			    csum, ifp->if_csum);
-		ret = 1;
-		goto free_bail;
-	}
-	hi_water = 0;
-	spin_lock_irqsave(&dd->eep_st_lock, flags);
-	for (idx = 0; idx < QIB_EEP_LOG_CNT; ++idx) {
-		int new_val = dd->eep_st_new_errs[idx];
-		if (new_val) {
-			/*
-			 * If we have seen any errors, add to EEPROM values
-			 * We need to saturate at 0xFF (255) and we also
-			 * would need to adjust the checksum if we were
-			 * trying to minimize EEPROM traffic
-			 * Note that we add to actual current count in EEPROM,
-			 * in case it was altered while we were running.
-			 */
-			new_val += ifp->if_errcntp[idx];
-			if (new_val > 0xFF)
-				new_val = 0xFF;
-			if (ifp->if_errcntp[idx] != new_val) {
-				ifp->if_errcntp[idx] = new_val;
-				hi_water = offsetof(struct qib_flash,
-						    if_errcntp) + idx;
-			}
-			/*
-			 * update our shadow (used to minimize EEPROM
-			 * traffic), to match what we are about to write.
-			 */
-			dd->eep_st_errs[idx] = new_val;
-			dd->eep_st_new_errs[idx] = 0;
-		}
-	}
-	/*
-	 * Now update active-time. We would like to round to the nearest hour
-	 * but unless atomic_t are sure to be proper signed ints we cannot,
-	 * because we need to account for what we "transfer" to EEPROM and
-	 * if we log an hour at 31 minutes, then we would need to set
-	 * active_time to -29 to accurately count the _next_ hour.
-	 */
-	if (new_time >= 3600) {
-		new_hrs = new_time / 3600;
-		atomic_sub((new_hrs * 3600), &dd->active_time);
-		new_hrs += dd->eep_hrs;
-		if (new_hrs > 0xFFFF)
-			new_hrs = 0xFFFF;
-		dd->eep_hrs = new_hrs;
-		if ((new_hrs & 0xFF) != ifp->if_powerhour[0]) {
-			ifp->if_powerhour[0] = new_hrs & 0xFF;
-			hi_water = offsetof(struct qib_flash, if_powerhour);
-		}
-		if ((new_hrs >> 8) != ifp->if_powerhour[1]) {
-			ifp->if_powerhour[1] = new_hrs >> 8;
-			hi_water = offsetof(struct qib_flash, if_powerhour) + 1;
-		}
-	}
-	/*
-	 * There is a tiny possibility that we could somehow fail to write
-	 * the EEPROM after updating our shadows, but problems from holding
-	 * the spinlock too long are a much bigger issue.
-	 */
-	spin_unlock_irqrestore(&dd->eep_st_lock, flags);
-	if (hi_water) {
-		/* we made some change to the data, uopdate cksum and write */
-		csum = flash_csum(ifp, 1);
-		ret = eeprom_write_with_enable(dd, 0, buf, hi_water + 1);
-	}
-	mutex_unlock(&dd->eep_lock);
-	if (ret)
-		qib_dev_err(dd, "Failed updating EEPROM\n");
-
-free_bail:
-	vfree(buf);
-bail:
-	return ret;
-}
-
-/**
- * qib_inc_eeprom_err - increment one of the four error counters
- * that are logged to EEPROM.
- * @dd: the qlogic_ib device
- * @eidx: 0..3, the counter to increment
- * @incr: how much to add
- *
- * Each counter is 8-bits, and saturates at 255 (0xFF). They
- * are copied to the EEPROM (aka flash) whenever qib_update_eeprom_log()
- * is called, but it can only be called in a context that allows sleep.
- * This function can be called even at interrupt level.
- */
-void qib_inc_eeprom_err(struct qib_devdata *dd, u32 eidx, u32 incr)
-{
-	uint new_val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dd->eep_st_lock, flags);
-	new_val = dd->eep_st_new_errs[eidx] + incr;
-	if (new_val > 255)
-		new_val = 255;
-	dd->eep_st_new_errs[eidx] = new_val;
-	spin_unlock_irqrestore(&dd->eep_st_lock, flags);
-}
diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c
index d0c64d5..eb60abd 100644
--- a/drivers/infiniband/hw/qib/qib_iba6120.c
+++ b/drivers/infiniband/hw/qib/qib_iba6120.c
@@ -2674,8 +2674,6 @@ static void qib_get_6120_faststats(unsigned long opaque)
 	spin_lock_irqsave(&dd->eep_st_lock, flags);
 	traffic_wds -= dd->traffic_wds;
 	dd->traffic_wds += traffic_wds;
-	if (traffic_wds  >= QIB_TRAFFIC_ACTIVE_THRESHOLD)
-		atomic_add(5, &dd->active_time); /* S/B #define */
 	spin_unlock_irqrestore(&dd->eep_st_lock, flags);
 
 	qib_chk_6120_errormask(dd);
diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c
index 3c722f7..b62c7f2 100644
--- a/drivers/infiniband/hw/qib/qib_iba7220.c
+++ b/drivers/infiniband/hw/qib/qib_iba7220.c
@@ -3292,8 +3292,6 @@ static void qib_get_7220_faststats(unsigned long opaque)
 	spin_lock_irqsave(&dd->eep_st_lock, flags);
 	traffic_wds -= dd->traffic_wds;
 	dd->traffic_wds += traffic_wds;
-	if (traffic_wds  >= QIB_TRAFFIC_ACTIVE_THRESHOLD)
-		atomic_add(5, &dd->active_time); /* S/B #define */
 	spin_unlock_irqrestore(&dd->eep_st_lock, flags);
 done:
 	mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER);
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index d252053..0d8e348 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -4841,8 +4841,6 @@ static void qib_get_7322_faststats(unsigned long opaque)
 		spin_lock_irqsave(&ppd->dd->eep_st_lock, flags);
 		traffic_wds -= ppd->dd->traffic_wds;
 		ppd->dd->traffic_wds += traffic_wds;
-		if (traffic_wds >= QIB_TRAFFIC_ACTIVE_THRESHOLD)
-			atomic_add(ACTIVITY_TIMER, &ppd->dd->active_time);
 		spin_unlock_irqrestore(&ppd->dd->eep_st_lock, flags);
 		if (ppd->cpspec->qdr_dfe_on && (ppd->link_speed_active &
 						QIB_IB_QDR) &&
diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c
index cf0cd30..0776dd0 100644
--- a/drivers/infiniband/hw/qib/qib_init.c
+++ b/drivers/infiniband/hw/qib/qib_init.c
@@ -765,7 +765,6 @@ static void qib_shutdown_device(struct qib_devdata *dd)
 		dd->f_quiet_serdes(ppd);
 	}
 
-	qib_update_eeprom_log(dd);
 }
 
 /**
diff --git a/drivers/infiniband/hw/qib/qib_sysfs.c b/drivers/infiniband/hw/qib/qib_sysfs.c
index dae5160..c01cb11 100644
--- a/drivers/infiniband/hw/qib/qib_sysfs.c
+++ b/drivers/infiniband/hw/qib/qib_sysfs.c
@@ -550,28 +550,6 @@ bail:
 	return ret < 0 ? ret : count;
 }
 
-static ssize_t show_logged_errs(struct device *device,
-				struct device_attribute *attr, char *buf)
-{
-	struct qib_ibdev *dev =
-		container_of(device, struct qib_ibdev, ibdev.dev);
-	struct qib_devdata *dd = dd_from_dev(dev);
-	int idx, count;
-
-	/* force consistency with actual EEPROM */
-	if (qib_update_eeprom_log(dd) != 0)
-		return -ENXIO;
-
-	count = 0;
-	for (idx = 0; idx < QIB_EEP_LOG_CNT; ++idx) {
-		count += scnprintf(buf + count, PAGE_SIZE - count, "%d%c",
-				   dd->eep_st_errs[idx],
-				   idx == (QIB_EEP_LOG_CNT - 1) ? '\n' : ' ');
-	}
-
-	return count;
-}
-
 /*
  * Dump tempsense regs. in decimal, to ease shell-scripts.
  */
@@ -618,7 +596,6 @@ static DEVICE_ATTR(nctxts, S_IRUGO, show_nctxts, NULL);
 static DEVICE_ATTR(nfreectxts, S_IRUGO, show_nfreectxts, NULL);
 static DEVICE_ATTR(serial, S_IRUGO, show_serial, NULL);
 static DEVICE_ATTR(boardversion, S_IRUGO, show_boardversion, NULL);
-static DEVICE_ATTR(logged_errors, S_IRUGO, show_logged_errs, NULL);
 static DEVICE_ATTR(tempsense, S_IRUGO, show_tempsense, NULL);
 static DEVICE_ATTR(localbus_info, S_IRUGO, show_localbus_info, NULL);
 static DEVICE_ATTR(chip_reset, S_IWUSR, NULL, store_chip_reset);
@@ -632,7 +609,6 @@ static struct device_attribute *qib_attributes[] = {
 	&dev_attr_nfreectxts,
 	&dev_attr_serial,
 	&dev_attr_boardversion,
-	&dev_attr_logged_errors,
 	&dev_attr_tempsense,
 	&dev_attr_localbus_info,
 	&dev_attr_chip_reset,
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 97e5f6f..6d6198a 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -274,8 +274,14 @@ static int synaptics_resolution(struct psmouse *psmouse)
 		}
 	}
 
-	if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 &&
-	    SYN_CAP_MIN_DIMENSIONS(priv->ext_cap_0c)) {
+	if (SYN_CAP_MIN_DIMENSIONS(priv->ext_cap_0c) &&
+	    (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 ||
+	     /*
+	      * Firmware v8.1 does not report proper number of extended
+	      * capabilities, but has been proven to report correct min
+	      * coordinates.
+	      */
+	     SYN_ID_FULL(priv->identity) == 0x801)) {
 		if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MIN_COORDS, resp)) {
 			psmouse_warn(psmouse,
 				     "device claims to have min coordinates query, but I'm not able to read it.\n");
@@ -506,6 +512,18 @@ static void synaptics_parse_agm(const unsigned char buf[],
 	priv->agm_pending = true;
 }
 
+static void synaptics_parse_ext_buttons(const unsigned char buf[],
+					struct synaptics_data *priv,
+					struct synaptics_hw_state *hw)
+{
+	unsigned int ext_bits =
+		(SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) + 1) >> 1;
+	unsigned int ext_mask = (1U << ext_bits) - 1;
+
+	hw->ext_buttons = buf[4] & ext_mask;
+	hw->ext_buttons |= (buf[5] & ext_mask) << ext_bits;
+}
+
 static bool is_forcepad;
 
 static int synaptics_parse_hw_state(const unsigned char buf[],
@@ -592,28 +610,9 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
 			hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0;
 		}
 
-		if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) &&
+		if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) > 0 &&
 		    ((buf[0] ^ buf[3]) & 0x02)) {
-			switch (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) & ~0x01) {
-			default:
-				/*
-				 * if nExtBtn is greater than 8 it should be
-				 * considered invalid and treated as 0
-				 */
-				break;
-			case 8:
-				hw->ext_buttons |= ((buf[5] & 0x08)) ? 0x80 : 0;
-				hw->ext_buttons |= ((buf[4] & 0x08)) ? 0x40 : 0;
-			case 6:
-				hw->ext_buttons |= ((buf[5] & 0x04)) ? 0x20 : 0;
-				hw->ext_buttons |= ((buf[4] & 0x04)) ? 0x10 : 0;
-			case 4:
-				hw->ext_buttons |= ((buf[5] & 0x02)) ? 0x08 : 0;
-				hw->ext_buttons |= ((buf[4] & 0x02)) ? 0x04 : 0;
-			case 2:
-				hw->ext_buttons |= ((buf[5] & 0x01)) ? 0x02 : 0;
-				hw->ext_buttons |= ((buf[4] & 0x01)) ? 0x01 : 0;
-			}
+			synaptics_parse_ext_buttons(buf, priv, hw);
 		}
 	} else {
 		hw->x = (((buf[1] & 0x1f) << 8) | buf[2]);
@@ -675,12 +674,35 @@ static void synaptics_report_semi_mt_data(struct input_dev *dev,
 	}
 }
 
+static void synaptics_report_ext_buttons(struct psmouse *psmouse,
+					 const struct synaptics_hw_state *hw)
+{
+	struct input_dev *dev = psmouse->dev;
+	struct synaptics_data *priv = psmouse->private;
+	int ext_bits = (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) + 1) >> 1;
+	int i;
+
+	if (!SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap))
+		return;
+
+	/* Bug in FW 8.1, buttons are reported only when ExtBit is 1 */
+	if (SYN_ID_FULL(priv->identity) == 0x801 &&
+	    !((psmouse->packet[0] ^ psmouse->packet[3]) & 0x02))
+		return;
+
+	for (i = 0; i < ext_bits; i++) {
+		input_report_key(dev, BTN_0 + 2 * i,
+			hw->ext_buttons & (1 << i));
+		input_report_key(dev, BTN_1 + 2 * i,
+			hw->ext_buttons & (1 << (i + ext_bits)));
+	}
+}
+
 static void synaptics_report_buttons(struct psmouse *psmouse,
 				     const struct synaptics_hw_state *hw)
 {
 	struct input_dev *dev = psmouse->dev;
 	struct synaptics_data *priv = psmouse->private;
-	int i;
 
 	input_report_key(dev, BTN_LEFT, hw->left);
 	input_report_key(dev, BTN_RIGHT, hw->right);
@@ -693,8 +715,7 @@ static void synaptics_report_buttons(struct psmouse *psmouse,
 		input_report_key(dev, BTN_BACK, hw->down);
 	}
 
-	for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++)
-		input_report_key(dev, BTN_0 + i, hw->ext_buttons & (1 << i));
+	synaptics_report_ext_buttons(psmouse, hw);
 }
 
 static void synaptics_report_slot(struct input_dev *dev, int slot,
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index ea5dd28..489d7fb 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -298,6 +298,18 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where,
 	sector_t remaining = where->count;
 	struct request_queue *q = bdev_get_queue(where->bdev);
 	sector_t discard_sectors;
+	unsigned int uninitialized_var(special_cmd_max_sectors);
+
+	/*
+	 * Reject unsupported discard and write same requests.
+	 */
+	if (rw & REQ_DISCARD) {
+		special_cmd_max_sectors = q->limits.max_discard_sectors;
+		if (special_cmd_max_sectors == 0) {
+			dec_count(io, region, -EOPNOTSUPP);
+			return;
+		}
+	}
 
 	/*
 	 * where->count may be zero if rw holds a flush and we need to
@@ -321,7 +333,7 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where,
 		store_io_and_region_in_bio(bio, io, region);
 
 		if (rw & REQ_DISCARD) {
-			discard_sectors = min_t(sector_t, q->limits.max_discard_sectors, remaining);
+			discard_sectors = min_t(sector_t, special_cmd_max_sectors, remaining);
 			bio->bi_size = discard_sectors << SECTOR_SHIFT;
 			remaining -= discard_sectors;
 		} else while (remaining) {
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index a3cf259..3afb9cd 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -603,6 +603,15 @@ static void write_callback(unsigned long error, void *context)
 		return;
 	}
 
+	/*
+	 * If the bio is discard, return an error, but do not
+	 * degrade the array.
+	 */
+	if (bio->bi_rw & REQ_DISCARD) {
+		bio_endio(bio, -EOPNOTSUPP);
+		return;
+	}
+
 	for (i = 0; i < ms->nr_mirrors; i++)
 		if (test_bit(i, &error))
 			fail_mirror(ms->mirror + i, DM_RAID1_WRITE_ERROR);
diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c
index b092338..696a16b 100644
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -1444,8 +1444,6 @@ out:
 		full_bio->bi_end_io = pe->full_bio_end_io;
 		full_bio->bi_private = pe->full_bio_private;
 	}
-	free_pending_exception(pe);
-
 	increment_pending_exceptions_done_count();
 
 	up_write(&s->lock);
@@ -1462,6 +1460,8 @@ out:
 	}
 
 	retry_origin_bios(s, origin_bios);
+
+	free_pending_exception(pe);
 }
 
 static void commit_callback(void *context, int success)
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 0cf8c51..3bfbccc 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2232,7 +2232,7 @@ int dm_setup_md_queue(struct mapped_device *md)
 	return 0;
 }
 
-static struct mapped_device *dm_find_md(dev_t dev)
+struct mapped_device *dm_get_md(dev_t dev)
 {
 	struct mapped_device *md;
 	unsigned minor = MINOR(dev);
@@ -2243,12 +2243,15 @@ static struct mapped_device *dm_find_md(dev_t dev)
 	spin_lock(&_minor_lock);
 
 	md = idr_find(&_minor_idr, minor);
-	if (md && (md == MINOR_ALLOCED ||
-		   (MINOR(disk_devt(dm_disk(md))) != minor) ||
-		   dm_deleting_md(md) ||
-		   test_bit(DMF_FREEING, &md->flags))) {
-		md = NULL;
-		goto out;
+	if (md) {
+		if ((md == MINOR_ALLOCED ||
+		     (MINOR(disk_devt(dm_disk(md))) != minor) ||
+		     dm_deleting_md(md) ||
+		     test_bit(DMF_FREEING, &md->flags))) {
+			md = NULL;
+			goto out;
+		}
+		dm_get(md);
 	}
 
 out:
@@ -2256,16 +2259,6 @@ out:
 
 	return md;
 }
-
-struct mapped_device *dm_get_md(dev_t dev)
-{
-	struct mapped_device *md = dm_find_md(dev);
-
-	if (md)
-		dm_get(md);
-
-	return md;
-}
 EXPORT_SYMBOL_GPL(dm_get_md);
 
 void *dm_get_mdptr(struct mapped_device *md)
@@ -2302,10 +2295,16 @@ static void __dm_destroy(struct mapped_device *md, bool wait)
 	set_bit(DMF_FREEING, &md->flags);
 	spin_unlock(&_minor_lock);
 
+	/*
+	 * Take suspend_lock so that presuspend and postsuspend methods
+	 * do not race with internal suspend.
+	 */
+	mutex_lock(&md->suspend_lock);
 	if (!dm_suspended_md(md)) {
 		dm_table_presuspend_targets(map);
 		dm_table_postsuspend_targets(map);
 	}
+	mutex_unlock(&md->suspend_lock);
 
 	/*
 	 * Rare, but there may be I/O requests still going to complete,
diff --git a/drivers/mtd/ubi/misc.c b/drivers/mtd/ubi/misc.c
index f6a7d7a..b14ab43 100644
--- a/drivers/mtd/ubi/misc.c
+++ b/drivers/mtd/ubi/misc.c
@@ -74,6 +74,8 @@ int ubi_check_volume(struct ubi_device *ubi, int vol_id)
 	for (i = 0; i < vol->used_ebs; i++) {
 		int size;
 
+		cond_resched();
+
 		if (i == vol->used_ebs - 1)
 			size = vol->last_eb_bytes;
 		else
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 88c39e4..81a00e4 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -475,6 +475,11 @@ struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf)
 	skb->protocol = htons(ETH_P_CAN);
 	skb->pkt_type = PACKET_BROADCAST;
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+	skb_reset_mac_header(skb);
+	skb_reset_network_header(skb);
+	skb_reset_transport_header(skb);
+
 	*cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
 	memset(*cf, 0, sizeof(struct can_frame));
 
diff --git a/drivers/net/ethernet/amd/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c
index 86b6d8e..d63b322 100644
--- a/drivers/net/ethernet/amd/pcnet32.c
+++ b/drivers/net/ethernet/amd/pcnet32.c
@@ -1526,7 +1526,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 {
 	struct pcnet32_private *lp;
 	int i, media;
-	int fdx, mii, fset, dxsuflo;
+	int fdx, mii, fset, dxsuflo, sram;
 	int chip_version;
 	char *chipname;
 	struct net_device *dev;
@@ -1563,7 +1563,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 	}
 
 	/* initialize variables */
-	fdx = mii = fset = dxsuflo = 0;
+	fdx = mii = fset = dxsuflo = sram = 0;
 	chip_version = (chip_version >> 12) & 0xffff;
 
 	switch (chip_version) {
@@ -1596,6 +1596,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		chipname = "PCnet/FAST III 79C973";	/* PCI */
 		fdx = 1;
 		mii = 1;
+		sram = 1;
 		break;
 	case 0x2626:
 		chipname = "PCnet/Home 79C978";	/* PCI */
@@ -1619,6 +1620,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		chipname = "PCnet/FAST III 79C975";	/* PCI */
 		fdx = 1;
 		mii = 1;
+		sram = 1;
 		break;
 	case 0x2628:
 		chipname = "PCnet/PRO 79C976";
@@ -1647,6 +1649,31 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		dxsuflo = 1;
 	}
 
+	/*
+	 * The Am79C973/Am79C975 controllers come with 12K of SRAM
+	 * which we can use for the Tx/Rx buffers but most importantly,
+	 * the use of SRAM allow us to use the BCR18:NOUFLO bit to avoid
+	 * Tx fifo underflows.
+	 */
+	if (sram) {
+		/*
+		 * The SRAM is being configured in two steps. First we
+		 * set the SRAM size in the BCR25:SRAM_SIZE bits. According
+		 * to the datasheet, each bit corresponds to a 512-byte
+		 * page so we can have at most 24 pages. The SRAM_SIZE
+		 * holds the value of the upper 8 bits of the 16-bit SRAM size.
+		 * The low 8-bits start at 0x00 and end at 0xff. So the
+		 * address range is from 0x0000 up to 0x17ff. Therefore,
+		 * the SRAM_SIZE is set to 0x17. The next step is to set
+		 * the BCR26:SRAM_BND midway through so the Tx and Rx
+		 * buffers can share the SRAM equally.
+		 */
+		a->write_bcr(ioaddr, 25, 0x17);
+		a->write_bcr(ioaddr, 26, 0xc);
+		/* And finally enable the NOUFLO bit */
+		a->write_bcr(ioaddr, 18, a->read_bcr(ioaddr, 18) | (1 << 11));
+	}
+
 	dev = alloc_etherdev(sizeof(*lp));
 	if (!dev) {
 		ret = -ENOMEM;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index b8e7f3e..1e274e7 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -10934,6 +10934,10 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 	/* clean indirect addresses */
 	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
 			       PCICFG_VENDOR_ID_OFFSET);
+
+	/* Set PCIe reset type to fundamental for EEH recovery */
+	pdev->needs_freset = 1;
+
 	/*
 	 * Clean the following indirect addresses for all functions since it
 	 * is not used by the driver.
diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index d16800f..56299e9 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -39,9 +39,7 @@
 
 static struct team_port *team_port_get_rcu(const struct net_device *dev)
 {
-	struct team_port *port = rcu_dereference(dev->rx_handler_data);
-
-	return team_port_exists(dev) ? port : NULL;
+	return rcu_dereference(dev->rx_handler_data);
 }
 
 static struct team_port *team_port_get_rtnl(const struct net_device *dev)
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 200f165..2cc3f41 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -476,7 +476,7 @@ ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags)
 	regval = ioread32(reg);
 	iowrite32(regval | val, reg);
 	regval = ioread32(reg);
-	usleep_range(100, 150);
+	udelay(100);	/* NB: should be atomic */
 
 	/* Bring BB/MAC out of reset */
 	iowrite32(regval & ~val, reg);
diff --git a/drivers/pci/hotplug.c b/drivers/pci/hotplug.c
index 2b5352a..3b70f5c 100644
--- a/drivers/pci/hotplug.c
+++ b/drivers/pci/hotplug.c
@@ -27,7 +27,7 @@ int pci_uevent(struct device *dev, struct kobj_uevent_env *env)
 	if (add_uevent_var(env, "PCI_SLOT_NAME=%s", pci_name(pdev)))
 		return -ENOMEM;
 
-	if (add_uevent_var(env, "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x",
+	if (add_uevent_var(env, "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02X",
 			   pdev->vendor, pdev->device,
 			   pdev->subsystem_vendor, pdev->subsystem_device,
 			   (u8)(pdev->class >> 16), (u8)(pdev->class >> 8),
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index d62ad0b..868440f 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -44,12 +44,10 @@ int no_pci_devices(void)
 }
 EXPORT_SYMBOL(no_pci_devices);
 
-static struct pci_host_bridge *pci_host_bridge(struct pci_dev *dev)
+static struct pci_host_bridge *pci_host_bridge(struct pci_bus *bus)
 {
-	struct pci_bus *bus;
 	struct pci_host_bridge *bridge;
 
-	bus = dev->bus;
 	while (bus->parent)
 		bus = bus->parent;
 
@@ -66,10 +64,10 @@ static bool resource_contains(struct resource *res1, struct resource *res2)
 	return res1->start <= res2->start && res1->end >= res2->end;
 }
 
-void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+void pcibios_resource_to_bus(struct pci_bus *bus, struct pci_bus_region *region,
 			     struct resource *res)
 {
-	struct pci_host_bridge *bridge = pci_host_bridge(dev);
+	struct pci_host_bridge *bridge = pci_host_bridge(bus);
 	struct pci_host_bridge_window *window;
 	resource_size_t offset = 0;
 
@@ -94,10 +92,10 @@ static bool region_contains(struct pci_bus_region *region1,
 	return region1->start <= region2->start && region1->end >= region2->end;
 }
 
-void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+void pcibios_bus_to_resource(struct pci_bus *bus, struct resource *res,
 			     struct pci_bus_region *region)
 {
-	struct pci_host_bridge *bridge = pci_host_bridge(dev);
+	struct pci_host_bridge *bridge = pci_host_bridge(bus);
 	struct pci_host_bridge_window *window;
 	struct pci_bus_region bus_region;
 	resource_size_t offset = 0;
@@ -298,11 +296,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 			pci_write_config_dword(dev, pos + 4, 0);
 			region.start = 0;
 			region.end = sz64;
-			pcibios_bus_to_resource(dev, res, &region);
+			pcibios_bus_to_resource(dev->bus, res, &region);
 		} else {
 			region.start = l64;
 			region.end = l64 + sz64;
-			pcibios_bus_to_resource(dev, res, &region);
+			pcibios_bus_to_resource(dev->bus, res, &region);
 			dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n",
 				   pos, res);
 		}
@@ -314,7 +312,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 
 		region.start = l;
 		region.end = l + sz;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 
 		dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res);
 	}
@@ -373,7 +371,7 @@ static void __devinit pci_read_bridge_io(struct pci_bus *child)
 		res2.flags = res->flags;
 		region.start = base;
 		region.end = limit + 0xfff;
-		pcibios_bus_to_resource(dev, &res2, &region);
+		pcibios_bus_to_resource(dev->bus, &res2, &region);
 		if (!res->start)
 			res->start = res2.start;
 		if (!res->end)
@@ -399,7 +397,7 @@ static void __devinit pci_read_bridge_mmio(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
 		region.start = base;
 		region.end = limit + 0xfffff;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 		dev_printk(KERN_DEBUG, &dev->dev, "  bridge window %pR\n", res);
 	}
 }
@@ -448,7 +446,7 @@ static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child)
 			res->flags |= IORESOURCE_MEM_64;
 		region.start = base;
 		region.end = limit + 0xfffff;
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 		dev_printk(KERN_DEBUG, &dev->dev, "  bridge window %pR\n", res);
 	}
 }
@@ -1063,24 +1061,24 @@ int pci_setup_device(struct pci_dev *dev)
 				region.end = 0x1F7;
 				res = &dev->resource[0];
 				res->flags = LEGACY_IO_RESOURCE;
-				pcibios_bus_to_resource(dev, res, &region);
+				pcibios_bus_to_resource(dev->bus, res, &region);
 				region.start = 0x3F6;
 				region.end = 0x3F6;
 				res = &dev->resource[1];
 				res->flags = LEGACY_IO_RESOURCE;
-				pcibios_bus_to_resource(dev, res, &region);
+				pcibios_bus_to_resource(dev->bus, res, &region);
 			}
 			if ((progif & 4) == 0) {
 				region.start = 0x170;
 				region.end = 0x177;
 				res = &dev->resource[2];
 				res->flags = LEGACY_IO_RESOURCE;
-				pcibios_bus_to_resource(dev, res, &region);
+				pcibios_bus_to_resource(dev->bus, res, &region);
 				region.start = 0x376;
 				region.end = 0x376;
 				res = &dev->resource[3];
 				res->flags = LEGACY_IO_RESOURCE;
-				pcibios_bus_to_resource(dev, res, &region);
+				pcibios_bus_to_resource(dev->bus, res, &region);
 			}
 		}
 		break;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index ffde183..c030024 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -393,7 +393,7 @@ static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region,
 		/* Convert from PCI bus to resource space.  */
 		bus_region.start = res->start;
 		bus_region.end = res->end;
-		pcibios_bus_to_resource(dev, res, &bus_region);
+		pcibios_bus_to_resource(dev->bus, res, &bus_region);
 
 		if (pci_claim_resource(dev, nr) == 0)
 			dev_info(&dev->dev, "quirk: %pR claimed by %s\n",
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index 48ebdb2..336b999 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -31,7 +31,7 @@ int pci_enable_rom(struct pci_dev *pdev)
 	if (!res->flags)
 		return -1;
 
-	pcibios_resource_to_bus(pdev, &region, res);
+	pcibios_resource_to_bus(pdev->bus, &region, res);
 	pci_read_config_dword(pdev, pdev->rom_base_reg, &rom_addr);
 	rom_addr &= ~PCI_ROM_ADDRESS_MASK;
 	rom_addr |= region.start | PCI_ROM_ADDRESS_ENABLE;
@@ -69,6 +69,7 @@ size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size)
 {
 	void __iomem *image;
 	int last_image;
+	unsigned length;
 
 	image = rom;
 	do {
@@ -91,9 +92,9 @@ size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size)
 		if (readb(pds + 3) != 'R')
 			break;
 		last_image = readb(pds + 21) & 0x80;
-		/* this length is reliable */
-		image += readw(pds + 16) * 512;
-	} while (!last_image);
+		length = readw(pds + 16);
+		image += length * 512;
+	} while (length && !last_image);
 
 	/* never return a size larger than the PCI resource window */
 	/* there are known ROMs that get the size wrong */
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 8fa2d4b..244ada4 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -408,7 +408,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
 		 bus->secondary, bus->subordinate);
 
 	res = bus->resource[0];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_IO) {
 		/*
 		 * The IO resource is allocated a range twice as large as it
@@ -422,7 +422,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
 	}
 
 	res = bus->resource[1];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_IO) {
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
 		pci_write_config_dword(bridge, PCI_CB_IO_BASE_1,
@@ -432,7 +432,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
 	}
 
 	res = bus->resource[2];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_MEM) {
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
 		pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_0,
@@ -442,7 +442,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
 	}
 
 	res = bus->resource[3];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_MEM) {
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
 		pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_1,
@@ -473,7 +473,7 @@ static void pci_setup_bridge_io(struct pci_bus *bus)
 
 	/* Set up the top and bottom of the PCI I/O segment for this bus. */
 	res = bus->resource[0];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_IO) {
 		pci_read_config_dword(bridge, PCI_IO_BASE, &l);
 		l &= 0xffff0000;
@@ -504,7 +504,7 @@ static void pci_setup_bridge_mmio(struct pci_bus *bus)
 
 	/* Set up the top and bottom of the PCI Memory segment for this bus. */
 	res = bus->resource[1];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_MEM) {
 		l = (region.start >> 16) & 0xfff0;
 		l |= region.end & 0xfff00000;
@@ -530,7 +530,7 @@ static void pci_setup_bridge_mmio_pref(struct pci_bus *bus)
 	/* Set up PREF base/limit. */
 	bu = lu = 0;
 	res = bus->resource[2];
-	pcibios_resource_to_bus(bridge, &region, res);
+	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_PREFETCH) {
 		l = (region.start >> 16) & 0xfff0;
 		l |= region.end & 0xfff00000;
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index be76eba..d427277 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -50,7 +50,7 @@ void pci_update_resource(struct pci_dev *dev, int resno)
 	if (res->flags & IORESOURCE_PCI_FIXED)
 		return;
 
-	pcibios_resource_to_bus(dev, &region, res);
+	pcibios_resource_to_bus(dev->bus, &region, res);
 
 	new = region.start | (res->flags & PCI_REGION_FLAG_MASK);
 	if (res->flags & IORESOURCE_IO)
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index 4e8831b..099034b 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -610,7 +610,7 @@ static int i82092aa_set_mem_map(struct pcmcia_socket *socket, struct pccard_mem_
 	
 	enter("i82092aa_set_mem_map");
 
-	pcibios_resource_to_bus(sock_info->dev, &region, mem->res);
+	pcibios_resource_to_bus(sock_info->dev->bus, &region, mem->res);
 	
 	map = mem->map;
 	if (map > 4) {
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index d07f9ac..13e76f9 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -445,7 +445,7 @@ static int yenta_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *
 	unsigned int start, stop, card_start;
 	unsigned short word;
 
-	pcibios_resource_to_bus(socket->dev, &region, mem->res);
+	pcibios_resource_to_bus(socket->dev->bus, &region, mem->res);
 
 	map = mem->map;
 	start = region.start;
@@ -709,7 +709,7 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
 	region.start = config_readl(socket, addr_start) & mask;
 	region.end = config_readl(socket, addr_end) | ~mask;
 	if (region.start && region.end > region.start && !override_bios) {
-		pcibios_bus_to_resource(dev, res, &region);
+		pcibios_bus_to_resource(dev->bus, res, &region);
 		if (pci_claim_resource(dev, PCI_BRIDGE_RESOURCES + nr) == 0)
 			return 0;
 		dev_printk(KERN_INFO, &dev->dev,
@@ -1033,7 +1033,7 @@ static void yenta_config_init(struct yenta_socket *socket)
 	struct pci_dev *dev = socket->dev;
 	struct pci_bus_region region;
 
-	pcibios_resource_to_bus(socket->dev, &region, &dev->resource[0]);
+	pcibios_resource_to_bus(socket->dev->bus, &region, &dev->resource[0]);
 
 	config_writel(socket, CB_LEGACY_MODE_BASE, 0);
 	config_writel(socket, PCI_BASE_ADDRESS_0, region.start);
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 375756f..348560a 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -424,7 +424,6 @@ static struct beiscsi_hba *beiscsi_hba_alloc(struct pci_dev *pcidev)
 			"iscsi_host_alloc failed\n");
 		return NULL;
 	}
-	shost->dma_boundary = pcidev->dma_mask;
 	shost->max_id = BE2_MAX_SESSIONS;
 	shost->max_channel = 0;
 	shost->max_cmd_len = BEISCSI_MAX_CMD_LEN;
@@ -4399,9 +4398,9 @@ free_port:
 hba_free:
 	if (phba->msix_enabled)
 		pci_disable_msix(phba->pcidev);
-	iscsi_host_remove(phba->shost);
 	pci_dev_put(phba->pcidev);
 	iscsi_host_free(phba->shost);
+	pci_set_drvdata(pcidev, NULL);
 disable_pci:
 	pci_disable_device(pcidev);
 	return ret;
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index bc88cab..f5ccdcdf 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3507,10 +3507,6 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 
 	/* Save the PCI command register */
 	pci_read_config_word(pdev, 4, &command_register);
-	/* Turn the board off.  This is so that later pci_restore_state()
-	 * won't turn the board on before the rest of config space is ready.
-	 */
-	pci_disable_device(pdev);
 	pci_save_state(pdev);
 
 	/* find the first memory BAR, so we can find the cfg table */
@@ -3534,7 +3530,7 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 	}
 	rc = write_driver_ver_to_cfgtable(cfgtable);
 	if (rc)
-		goto unmap_vaddr;
+		goto unmap_cfgtable;
 
 	/* If reset via doorbell register is supported, use that.
 	 * There are two such methods.  Favor the newest method.
@@ -3558,11 +3554,6 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 		goto unmap_cfgtable;
 
 	pci_restore_state(pdev);
-	rc = pci_enable_device(pdev);
-	if (rc) {
-		dev_warn(&pdev->dev, "failed to enable device.\n");
-		goto unmap_cfgtable;
-	}
 	pci_write_config_word(pdev, 4, command_register);
 
 	/* Some devices (notably the HP Smart Array 5i Controller)
@@ -4064,10 +4055,37 @@ static void __devinit hpsa_hba_inquiry(struct ctlr_info *h)
 static __devinit int hpsa_init_reset_devices(struct pci_dev *pdev)
 {
 	int rc, i;
+	void __iomem *vaddr;
 
 	if (!reset_devices)
 		return 0;
 
+	/* kdump kernel is loading, we don't know in which state is
+	 * the pci interface. The dev->enable_cnt is equal zero
+	 * so we call enable+disable, wait a while and switch it on.
+	 */
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_warn(&pdev->dev, "Failed to enable PCI device\n");
+		return -ENODEV;
+	}
+	pci_disable_device(pdev);
+	msleep(260);			/* a randomly chosen number */
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_warn(&pdev->dev, "failed to enable device.\n");
+		return -ENODEV;
+	}
+	pci_set_master(pdev);
+
+	vaddr = pci_ioremap_bar(pdev, 0);
+	if (vaddr == NULL) {
+		rc = -ENOMEM;
+		goto out_disable;
+	}
+	writel(SA5_INTR_OFF, vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+	iounmap(vaddr);
+
 	/* Reset the controller with a PCI power-cycle or via doorbell */
 	rc = hpsa_kdump_hard_reset_controller(pdev);
 
@@ -4076,10 +4094,11 @@ static __devinit int hpsa_init_reset_devices(struct pci_dev *pdev)
 	 * "performant mode".  Or, it might be 640x, which can't reset
 	 * due to concerns about shared bbwc between 6402/6404 pair.
 	 */
-	if (rc == -ENOTSUPP)
-		return rc; /* just try to do the kdump anyhow. */
-	if (rc)
-		return -ENODEV;
+	if (rc) {
+		if (rc != -ENOTSUPP) /* just try to do the kdump anyhow. */
+			rc = -ENODEV;
+		goto out_disable;
+	}
 
 	/* Now try to get the controller to respond to a no-op */
 	dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n");
@@ -4090,7 +4109,11 @@ static __devinit int hpsa_init_reset_devices(struct pci_dev *pdev)
 			dev_warn(&pdev->dev, "no-op failed%s\n",
 					(i < 11 ? "; re-trying" : ""));
 	}
-	return 0;
+
+out_disable:
+
+	pci_disable_device(pdev);
+	return rc;
 }
 
 static __devinit int hpsa_allocate_cmd_pool(struct ctlr_info *h)
@@ -4191,6 +4214,7 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
 		iounmap(h->transtable);
 	if (h->cfgtable)
 		iounmap(h->cfgtable);
+	pci_disable_device(h->pdev);
 	pci_release_regions(h->pdev);
 	kfree(h);
 }
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index 629a086..5fbacde 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -446,6 +446,7 @@ static void sas_revalidate_domain(struct work_struct *work)
 	struct sas_discovery_event *ev = to_sas_discovery_event(work);
 	struct asd_sas_port *port = ev->port;
 	struct sas_ha_struct *ha = port->ha;
+	struct domain_device *ddev = port->port_dev;
 
 	/* prevent revalidation from finding sata links in recovery */
 	mutex_lock(&ha->disco_mutex);
@@ -460,8 +461,9 @@ static void sas_revalidate_domain(struct work_struct *work)
 	SAS_DPRINTK("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
 		    task_pid_nr(current));
 
-	if (port->port_dev)
-		res = sas_ex_revalidate_domain(port->port_dev);
+	if (ddev && (ddev->dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
+		     ddev->dev_type == SAS_EDGE_EXPANDER_DEVICE))
+		res = sas_ex_revalidate_domain(ddev);
 
 	SAS_DPRINTK("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",
 		    port->id, task_pid_nr(current), res);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index ac99b46..a30f7a0 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1209,9 +1209,11 @@ int scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
 				    "rejecting I/O to dead device\n");
 			ret = BLKPREP_KILL;
 			break;
-		case SDEV_QUIESCE:
 		case SDEV_BLOCK:
 		case SDEV_CREATED_BLOCK:
+			ret = BLKPREP_DEFER;
+			break;
+		case SDEV_QUIESCE:
 			/*
 			 * If the devices is blocked we defer normal commands.
 			 */
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index eacd46b..fb119ce 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -498,7 +498,7 @@ static ssize_t
 sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp)
 {
 	sg_io_hdr_t *hp = &srp->header;
-	int err = 0;
+	int err = 0, err2;
 	int len;
 
 	if (count < SZ_SG_IO_HDR) {
@@ -527,8 +527,8 @@ sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp)
 		goto err_out;
 	}
 err_out:
-	err = sg_finish_rem_req(srp);
-	return (0 == err) ? count : err;
+	err2 = sg_finish_rem_req(srp);
+	return err ? : err2 ? : count;
 }
 
 static ssize_t
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 36d1ed7..1e3d789 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1609,7 +1609,7 @@ sym_iomap_device(struct sym_device *device)
 	struct pci_bus_region bus_addr;
 	int i = 2;
 
-	pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[1]);
+	pcibios_resource_to_bus(pdev->bus, &bus_addr, &pdev->resource[1]);
 	device->mmio_base = bus_addr.start;
 
 	if (device->chip.features & FE_RAM) {
@@ -1619,7 +1619,8 @@ sym_iomap_device(struct sym_device *device)
 		 */
 		if (!pdev->resource[i].flags)
 			i++;
-		pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[i]);
+		pcibios_resource_to_bus(pdev->bus, &bus_addr,
+					&pdev->resource[i]);
 		device->ram_base = bus_addr.start;
 	}
 
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 830adbe..1556db9 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -241,7 +241,10 @@ static int spidev_message(struct spidev_data *spidev,
 		k_tmp->len = u_tmp->len;
 
 		total += k_tmp->len;
-		if (total > bufsiz) {
+		/* Check total length of transfers.  Also check each
+		 * transfer length to avoid arithmetic overflow.
+		 */
+		if (total > bufsiz || k_tmp->len > bufsiz) {
 			status = -EMSGSIZE;
 			goto done;
 		}
diff --git a/drivers/staging/comedi/comedi_compat32.c b/drivers/staging/comedi/comedi_compat32.c
index 41a7a62..a8a0c0f 100644
--- a/drivers/staging/comedi/comedi_compat32.c
+++ b/drivers/staging/comedi/comedi_compat32.c
@@ -271,7 +271,7 @@ static int compat_cmd(struct file *file, unsigned long arg)
 {
 	struct comedi_cmd __user *cmd;
 	struct comedi32_cmd_struct __user *cmd32;
-	int rc;
+	int rc, err;
 
 	cmd32 = compat_ptr(arg);
 	cmd = compat_alloc_user_space(sizeof(*cmd));
@@ -280,7 +280,15 @@ static int compat_cmd(struct file *file, unsigned long arg)
 	if (rc)
 		return rc;
 
-	return translated_ioctl(file, COMEDI_CMD, (unsigned long)cmd);
+	rc = translated_ioctl(file, COMEDI_CMD, (unsigned long)cmd);
+	if (rc == -EAGAIN) {
+		/* Special case: copy cmd back to user. */
+		err = put_compat_cmd(cmd32, cmd);
+		if (err)
+			rc = err;
+	}
+
+	return rc;
 }
 
 /* Handle 32-bit COMEDI_CMDTEST ioctl. */
diff --git a/drivers/staging/vt6655/rf.c b/drivers/staging/vt6655/rf.c
index b8ec783..3003363 100644
--- a/drivers/staging/vt6655/rf.c
+++ b/drivers/staging/vt6655/rf.c
@@ -1029,6 +1029,7 @@ unsigned char byPwrdBm = 0;
 		break;
     case RATE_6M:
     case RATE_9M:
+    case RATE_12M:
     case RATE_18M:
         byPwr = pDevice->abyOFDMPwrTbl[uCH];
         if (pDevice->byRFType == RF_UW2452) {
diff --git a/drivers/target/iscsi/iscsi_target_tq.c b/drivers/target/iscsi/iscsi_target_tq.c
index 977e1cf..4f447fd 100644
--- a/drivers/target/iscsi/iscsi_target_tq.c
+++ b/drivers/target/iscsi/iscsi_target_tq.c
@@ -26,36 +26,22 @@
 #include "iscsi_target_tq.h"
 #include "iscsi_target.h"
 
-static LIST_HEAD(active_ts_list);
 static LIST_HEAD(inactive_ts_list);
-static DEFINE_SPINLOCK(active_ts_lock);
 static DEFINE_SPINLOCK(inactive_ts_lock);
 static DEFINE_SPINLOCK(ts_bitmap_lock);
 
-static void iscsi_add_ts_to_active_list(struct iscsi_thread_set *ts)
-{
-	spin_lock(&active_ts_lock);
-	list_add_tail(&ts->ts_list, &active_ts_list);
-	iscsit_global->active_ts++;
-	spin_unlock(&active_ts_lock);
-}
-
 extern void iscsi_add_ts_to_inactive_list(struct iscsi_thread_set *ts)
 {
+	if (!list_empty(&ts->ts_list)) {
+		WARN_ON(1);
+		return;
+	}
 	spin_lock(&inactive_ts_lock);
 	list_add_tail(&ts->ts_list, &inactive_ts_list);
 	iscsit_global->inactive_ts++;
 	spin_unlock(&inactive_ts_lock);
 }
 
-static void iscsi_del_ts_from_active_list(struct iscsi_thread_set *ts)
-{
-	spin_lock(&active_ts_lock);
-	list_del(&ts->ts_list);
-	iscsit_global->active_ts--;
-	spin_unlock(&active_ts_lock);
-}
-
 static struct iscsi_thread_set *iscsi_get_ts_from_inactive_list(void)
 {
 	struct iscsi_thread_set *ts;
@@ -69,7 +55,7 @@ static struct iscsi_thread_set *iscsi_get_ts_from_inactive_list(void)
 	list_for_each_entry(ts, &inactive_ts_list, ts_list)
 		break;
 
-	list_del(&ts->ts_list);
+	list_del_init(&ts->ts_list);
 	iscsit_global->inactive_ts--;
 	spin_unlock(&inactive_ts_lock);
 
@@ -220,8 +206,6 @@ static void iscsi_deallocate_extra_thread_sets(void)
 
 void iscsi_activate_thread_set(struct iscsi_conn *conn, struct iscsi_thread_set *ts)
 {
-	iscsi_add_ts_to_active_list(ts);
-
 	spin_lock_bh(&ts->ts_state_lock);
 	conn->thread_set = ts;
 	ts->conn = conn;
@@ -424,7 +408,6 @@ struct iscsi_conn *iscsi_rx_thread_pre_handler(struct iscsi_thread_set *ts)
 
 	if (ts->delay_inactive && (--ts->thread_count == 0)) {
 		spin_unlock_bh(&ts->ts_state_lock);
-		iscsi_del_ts_from_active_list(ts);
 
 		if (!iscsit_global->in_shutdown)
 			iscsi_deallocate_extra_thread_sets();
@@ -477,7 +460,6 @@ struct iscsi_conn *iscsi_tx_thread_pre_handler(struct iscsi_thread_set *ts)
 
 	if (ts->delay_inactive && (--ts->thread_count == 0)) {
 		spin_unlock_bh(&ts->ts_state_lock);
-		iscsi_del_ts_from_active_list(ts);
 
 		if (!iscsit_global->in_shutdown)
 			iscsi_deallocate_extra_thread_sets();
diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index d34577d..8082674 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -1165,7 +1165,7 @@ static u32 pscsi_get_device_type(struct se_device *dev)
 	struct pscsi_dev_virt *pdv = dev->dev_ptr;
 	struct scsi_device *sd = pdv->pdv_sd;
 
-	return sd->type;
+	return (sd) ? sd->type : TYPE_NO_LUN;
 }
 
 static sector_t pscsi_get_blocks(struct se_device *dev)
diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c
index dc7c0db..8d5cf53 100644
--- a/drivers/target/tcm_fc/tfc_io.c
+++ b/drivers/target/tcm_fc/tfc_io.c
@@ -330,7 +330,7 @@ void ft_invl_hw_context(struct ft_cmd *cmd)
 		ep = fc_seq_exch(seq);
 		if (ep) {
 			lport = ep->lp;
-			if (lport && (ep->xid <= lport->lro_xid))
+			if (lport && (ep->xid <= lport->lro_xid)) {
 				/*
 				 * "ddp_done" trigger invalidation of HW
 				 * specific DDP context
@@ -345,6 +345,7 @@ void ft_invl_hw_context(struct ft_cmd *cmd)
 				 * identified using ep->xid)
 				 */
 				cmd->was_ddp_setup = 0;
+			}
 		}
 	}
 }
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index cf9a191..bc955d7 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -173,6 +173,9 @@ static int pty_signal(struct tty_struct *tty, int sig)
 	unsigned long flags;
 	struct pid *pgrp;
 
+	if (sig != SIGINT && sig != SIGQUIT && sig != SIGTSTP)
+		return -EINVAL;
+
 	if (tty->link) {
 		spin_lock_irqsave(&tty->link->ctrl_lock, flags);
 		pgrp = get_pid(tty->link->pgrp);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 6f8f985..e4aada5 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -67,7 +67,7 @@ static void moan_device(const char *str, struct pci_dev *dev)
 	       "Please send the output of lspci -vv, this\n"
 	       "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
 	       "manufacturer and name of serial board or\n"
-	       "modem board to rmk+serial@arm.linux.org.uk.\n",
+	       "modem board to <linux-serial@vger.kernel.org>.\n",
 	       pci_name(dev), str, dev->vendor, dev->device,
 	       dev->subsystem_vendor, dev->subsystem_device);
 }
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index a07eb4c..5f0b4a4 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -941,8 +941,8 @@ EXPORT_SYMBOL(start_tty);
 /* We limit tty time update visibility to every 8 seconds or so. */
 static void tty_update_time(struct timespec *time)
 {
-	unsigned long sec = get_seconds() & ~7;
-	if ((long)(sec - time->tv_sec) > 0)
+	unsigned long sec = get_seconds();
+	if (abs(sec - time->tv_sec) & ~7)
 		time->tv_sec = sec;
 }
 
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index f8d03da..9ab33c7 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -153,11 +153,17 @@ void tty_wait_until_sent(struct tty_struct *tty, long timeout)
 #endif
 	if (!timeout)
 		timeout = MAX_SCHEDULE_TIMEOUT;
+
 	if (wait_event_interruptible_timeout(tty->write_wait,
-			!tty_chars_in_buffer(tty), timeout) >= 0) {
-		if (tty->ops->wait_until_sent)
-			tty->ops->wait_until_sent(tty, timeout);
+			!tty_chars_in_buffer(tty), timeout) < 0) {
+		return;
 	}
+
+	if (timeout == MAX_SCHEDULE_TIMEOUT)
+		timeout = 0;
+
+	if (tty->ops->wait_until_sent)
+		tty->ops->wait_until_sent(tty, timeout);
 }
 EXPORT_SYMBOL(tty_wait_until_sent);
 
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 268294c..334a7b2 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -498,6 +498,7 @@ void invert_screen(struct vc_data *vc, int offset, int count, int viewed)
 #endif
 	if (DO_UPDATE(vc))
 		do_update_region(vc, (unsigned long) p, count);
+	notify_update(vc);
 }
 
 /* used by selection: complement pointer position */
@@ -514,6 +515,7 @@ void complement_pos(struct vc_data *vc, int offset)
 		scr_writew(old, screenpos(vc, old_offset, 1));
 		if (DO_UPDATE(vc))
 			vc->vc_sw->con_putc(vc, old, oldy, oldx);
+		notify_update(vc);
 	}
 
 	old_offset = offset;
@@ -531,8 +533,8 @@ void complement_pos(struct vc_data *vc, int offset)
 			oldy = (offset >> 1) / vc->vc_cols;
 			vc->vc_sw->con_putc(vc, new, oldy, oldx);
 		}
+		notify_update(vc);
 	}
-
 }
 
 static void insert_char(struct vc_data *vc, unsigned int nr)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 0532577..25bc1d6 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1008,6 +1008,7 @@ static int acm_probe(struct usb_interface *intf,
 	unsigned long quirks;
 	int num_rx_buf;
 	int i;
+	unsigned int elength = 0;
 	int combined_interfaces = 0;
 
 	/* normal quirks */
@@ -1043,6 +1044,12 @@ static int acm_probe(struct usb_interface *intf,
 	}
 
 	while (buflen > 0) {
+		elength = buffer[0];
+		if (!elength) {
+			dev_err(&intf->dev, "skipping garbage byte\n");
+			elength = 1;
+			goto next_desc;
+		}
 		if (buffer[1] != USB_DT_CS_INTERFACE) {
 			dev_err(&intf->dev, "skipping garbage\n");
 			goto next_desc;
@@ -1050,6 +1057,8 @@ static int acm_probe(struct usb_interface *intf,
 
 		switch (buffer[2]) {
 		case USB_CDC_UNION_TYPE: /* we've found it */
+			if (elength < sizeof(struct usb_cdc_union_desc))
+				goto next_desc;
 			if (union_header) {
 				dev_err(&intf->dev, "More than one "
 					"union descriptor, skipping ...\n");
@@ -1058,31 +1067,38 @@ static int acm_probe(struct usb_interface *intf,
 			union_header = (struct usb_cdc_union_desc *)buffer;
 			break;
 		case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/
+			if (elength < sizeof(struct usb_cdc_country_functional_desc))
+				goto next_desc;
 			cfd = (struct usb_cdc_country_functional_desc *)buffer;
 			break;
 		case USB_CDC_HEADER_TYPE: /* maybe check version */
 			break; /* for now we ignore it */
 		case USB_CDC_ACM_TYPE:
+			if (elength < 4)
+				goto next_desc;
 			ac_management_function = buffer[3];
 			break;
 		case USB_CDC_CALL_MANAGEMENT_TYPE:
+			if (elength < 5)
+				goto next_desc;
 			call_management_function = buffer[3];
 			call_interface_num = buffer[4];
 			if ( (quirks & NOT_A_MODEM) == 0 && (call_management_function & 3) != 3)
 				dev_err(&intf->dev, "This device cannot do calls on its own. It is not a modem.\n");
 			break;
 		default:
-			/* there are LOTS more CDC descriptors that
+			/*
+			 * there are LOTS more CDC descriptors that
 			 * could legitimately be found here.
 			 */
 			dev_dbg(&intf->dev, "Ignoring descriptor: "
-					"type %02x, length %d\n",
-					buffer[2], buffer[0]);
+					"type %02x, length %ud\n",
+					buffer[2], elength);
 			break;
 		}
 next_desc:
-		buflen -= buffer[0];
-		buffer += buffer[0];
+		buflen -= elength;
+		buffer += elength;
 	}
 
 	if (!union_header) {
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index b0585e6..19fa68a 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -22,17 +22,25 @@
  */
 
 /* FIXME tune these based on pool statistics ... */
-static const size_t	pool_max[HCD_BUFFER_POOLS] = {
-	/* platforms without dma-friendly caches might need to
-	 * prevent cacheline sharing...
-	 */
-	32,
-	128,
-	512,
-	PAGE_SIZE / 2
-	/* bigger --> allocate pages */
+static size_t pool_max[HCD_BUFFER_POOLS] = {
+	32, 128, 512, 2048,
 };
 
+void __init usb_init_pool_max(void)
+{
+	/*
+	 * The pool_max values must never be smaller than
+	 * ARCH_KMALLOC_MINALIGN.
+	 */
+	if (ARCH_KMALLOC_MINALIGN <= 32)
+		;			/* Original value is okay */
+	else if (ARCH_KMALLOC_MINALIGN <= 64)
+		pool_max[0] = 64;
+	else if (ARCH_KMALLOC_MINALIGN <= 128)
+		pool_max[0] = 0;	/* Don't use this pool */
+	else
+		BUILD_BUG();		/* We don't allow this */
+}
 
 /* SETUP primitives */
 
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 371fe69..d2ae3d9 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -444,6 +444,7 @@ static void async_completed(struct urb *urb)
 	as->status = urb->status;
 	signr = as->signr;
 	if (signr) {
+		memset(&sinfo, 0, sizeof(sinfo));
 		sinfo.si_signo = as->signr;
 		sinfo.si_errno = as->status;
 		sinfo.si_code = SI_ASYNCIO;
@@ -2091,6 +2092,7 @@ static void usbdev_remove(struct usb_device *udev)
 		wake_up_all(&ps->wait);
 		list_del_init(&ps->list);
 		if (ps->discsignr) {
+			memset(&sinfo, 0, sizeof(sinfo));
 			sinfo.si_signo = ps->discsignr;
 			sinfo.si_errno = EPIPE;
 			sinfo.si_code = SI_ASYNCIO;
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 35bc3ba..621ea00 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1686,6 +1686,18 @@ static int autosuspend_check(struct usb_device *udev)
 		dev_dbg(&udev->dev, "remote wakeup needed for autosuspend\n");
 		return -EOPNOTSUPP;
 	}
+
+	/*
+	 * If the device is a direct child of the root hub and the HCD
+	 * doesn't handle wakeup requests, don't allow autosuspend when
+	 * wakeup is needed.
+	 */
+	if (w && udev->parent == udev->bus->root_hub &&
+			bus_to_hcd(udev->bus)->cant_recv_wakeups) {
+		dev_dbg(&udev->dev, "HCD doesn't handle wakeup requests\n");
+		return -EOPNOTSUPP;
+	}
+
 	udev->do_remote_wakeup = w;
 	return 0;
 }
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 6baeada..f1d0e3c 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1528,6 +1528,7 @@ static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
 int usb_hcd_unlink_urb (struct urb *urb, int status)
 {
 	struct usb_hcd		*hcd;
+	struct usb_device	*udev = urb->dev;
 	int			retval = -EIDRM;
 	unsigned long		flags;
 
@@ -1539,20 +1540,19 @@ int usb_hcd_unlink_urb (struct urb *urb, int status)
 	spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
 	if (atomic_read(&urb->use_count) > 0) {
 		retval = 0;
-		usb_get_dev(urb->dev);
+		usb_get_dev(udev);
 	}
 	spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
 	if (retval == 0) {
 		hcd = bus_to_hcd(urb->dev->bus);
 		retval = unlink1(hcd, urb, status);
-		usb_put_dev(urb->dev);
+		if (retval == 0)
+			retval = -EINPROGRESS;
+		else if (retval != -EIDRM && retval != -EBUSY)
+			dev_dbg(&udev->dev, "hcd_unlink_urb %p fail %d\n",
+					urb, retval);
+		usb_put_dev(udev);
 	}
-
-	if (retval == 0)
-		retval = -EINPROGRESS;
-	else if (retval != -EIDRM && retval != -EBUSY)
-		dev_dbg(&urb->dev->dev, "hcd_unlink_urb %p fail %d\n",
-				urb, retval);
 	return retval;
 }
 
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index c74ba7b..8966960 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1010,6 +1010,7 @@ static int __init usb_init(void)
 		pr_info("%s: USB support disabled\n", usbcore_name);
 		return 0;
 	}
+	usb_init_pool_max();
 
 	retval = usb_debugfs_init();
 	if (retval)
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index d9eaaa3..093e907 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -570,6 +570,7 @@ static ssize_t ep_aio_read_retry(struct kiocb *iocb)
 			break;
 	}
 	kfree(priv->buf);
+	kfree(priv->iv);
 	kfree(priv);
 	return len;
 }
@@ -591,6 +592,7 @@ static void ep_aio_complete(struct usb_ep *ep, struct usb_request *req)
 	 */
 	if (priv->iv == NULL || unlikely(req->actual == 0)) {
 		kfree(req->buf);
+		kfree(priv->iv);
 		kfree(priv);
 		iocb->private = NULL;
 		/* aio_complete() reports bytes-transferred _and_ faults */
@@ -626,7 +628,7 @@ ep_aio_rwtail(
 	struct usb_request	*req;
 	ssize_t			value;
 
-	priv = kmalloc(sizeof *priv, GFP_KERNEL);
+	priv = kzalloc(sizeof *priv, GFP_KERNEL);
 	if (!priv) {
 		value = -ENOMEM;
 fail:
@@ -634,11 +636,19 @@ fail:
 		return value;
 	}
 	iocb->private = priv;
-	priv->iv = iv;
+	if (iv) {
+		priv->iv = kmemdup(iv, nr_segs * sizeof(struct iovec),
+				   GFP_KERNEL);
+		if (!priv->iv) {
+			kfree(priv);
+			goto fail;
+		}
+	}
 	priv->nr_segs = nr_segs;
 
 	value = get_ready_ep(iocb->ki_filp->f_flags, epdata);
 	if (unlikely(value < 0)) {
+		kfree(priv->iv);
 		kfree(priv);
 		goto fail;
 	}
@@ -672,6 +682,7 @@ fail:
 	mutex_unlock(&epdata->lock);
 
 	if (unlikely(value)) {
+		kfree(priv->iv);
 		kfree(priv);
 		put_ep(epdata);
 	} else
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index fc72d44..949303f 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -2242,6 +2242,9 @@ struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
 	hcd->rsrc_start = res_start;
 	hcd->rsrc_len = res_len;
 
+	/* This driver doesn't support wakeup requests */
+	hcd->cant_recv_wakeups = 1;
+
 	ret = usb_add_hcd(hcd, irq, irqflags);
 	if (ret)
 		goto err_unmap;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 56ec28b..a6d4393 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -383,6 +383,10 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
 		status = PORT_PLC;
 		port_change_bit = "link state";
 		break;
+	case USB_PORT_FEAT_C_PORT_CONFIG_ERROR:
+		status = PORT_CEC;
+		port_change_bit = "config error";
+		break;
 	default:
 		/* Should never happen */
 		return;
@@ -617,6 +621,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				status |= USB_PORT_STAT_C_LINK_STATE << 16;
 			if ((temp & PORT_WRC))
 				status |= USB_PORT_STAT_C_BH_RESET << 16;
+			if ((temp & PORT_CEC))
+				status |= USB_PORT_STAT_C_CONFIG_ERROR << 16;
 		}
 
 		if (hcd->speed != HCD_USB3) {
@@ -904,6 +910,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		case USB_PORT_FEAT_C_OVER_CURRENT:
 		case USB_PORT_FEAT_C_ENABLE:
 		case USB_PORT_FEAT_C_PORT_LINK_STATE:
+		case USB_PORT_FEAT_C_PORT_CONFIG_ERROR:
 			xhci_clear_port_change_bit(xhci, wValue, wIndex,
 					port_array[wIndex], temp);
 			break;
@@ -957,7 +964,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 	 */
 	status = bus_state->resuming_ports;
 
-	mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC;
+	mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC;
 
 	spin_lock_irqsave(&xhci->lock, flags);
 	/* For each port, did anything change?  If so, set that bit in buf. */
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c9e39d4..710b2e9 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -36,6 +36,9 @@
 
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI	0x8c31
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
+#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI		0x22b5
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI		0xa12f
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI	0x9d2f
 
 static const char hcd_name[] = "xhci_hcd";
 
@@ -102,6 +105,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	if (pdev->vendor == PCI_VENDOR_ID_AMD)
 		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+		xhci->quirks |= XHCI_AVOID_BEI;
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 			pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
 		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
@@ -116,7 +121,12 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		 * PPT chipsets.
 		 */
 		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
-		xhci->quirks |= XHCI_AVOID_BEI;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) {
+		xhci->quirks |= XHCI_PME_STUCK_QUIRK;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
@@ -131,6 +141,21 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 }
 
+/*
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct xhci_hcd *xhci)
+{
+	u32 val;
+	void __iomem *reg;
+
+	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+	val = readl(reg);
+	writel(val | BIT(28), reg);
+	readl(reg);
+}
+
 /* called during probe() after chip reset completes */
 static int xhci_pci_setup(struct usb_hcd *hcd)
 {
@@ -238,6 +263,9 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
 		return -EINVAL;
 
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(xhci);
+
 	retval = xhci_suspend(xhci, do_wakeup);
 
 	return retval;
@@ -268,6 +296,9 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	if (usb_is_intel_switchable_xhci(pdev))
 		usb_enable_xhci_ports(pdev);
 
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(xhci);
+
 	retval = xhci_resume(xhci, hibernated);
 	return retval;
 }
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 950edeb..e47a4e1 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2049,7 +2049,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	if (event_trb != ep_ring->dequeue) {
 		/* The event was for the status stage */
 		if (event_trb == td->last_trb) {
-			if (td->urb->actual_length != 0) {
+			if (td->urb_length_set) {
 				/* Don't overwrite a previously set error code
 				 */
 				if ((*status == -EINPROGRESS || *status == 0) &&
@@ -2063,7 +2063,13 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 					td->urb->transfer_buffer_length;
 			}
 		} else {
-		/* Maybe the event was for the data stage? */
+			/*
+			 * Maybe the event was for the data stage? If so, update
+			 * already the actual_length of the URB and flag it as
+			 * set, so that it is not overwritten in the event for
+			 * the last TRB.
+			 */
+			td->urb_length_set = true;
 			td->urb->actual_length =
 				td->urb->transfer_buffer_length -
 				EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 6c809350..80b3d85 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1,3 +1,4 @@
+
 /*
  * xHCI host controller driver
  *
@@ -88,9 +89,10 @@ struct xhci_cap_regs {
 #define HCS_IST(p)		(((p) >> 0) & 0xf)
 /* bits 4:7, max number of Event Ring segments */
 #define HCS_ERST_MAX(p)		(((p) >> 4) & 0xf)
+/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */
 /* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
-/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
-#define HCS_MAX_SCRATCHPAD(p)   (((p) >> 27) & 0x1f)
+/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */
+#define HCS_MAX_SCRATCHPAD(p)   ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f))
 
 /* HCSPARAMS3 - hcs_params3 - bitmasks */
 /* bits 0:7, Max U1 to U0 latency for the roothub ports */
@@ -1254,6 +1256,8 @@ struct xhci_td {
 	struct xhci_segment	*start_seg;
 	union xhci_trb		*first_trb;
 	union xhci_trb		*last_trb;
+	/* actual_length of the URB has already been set */
+	bool			urb_length_set;
 };
 
 /* xHCI command default timeout value */
@@ -1511,6 +1515,7 @@ struct xhci_hcd {
 #define XHCI_PLAT		(1 << 16)
 #define XHCI_SLOW_SUSPEND	(1 << 17)
 #define XHCI_SPURIOUS_WAKEUP	(1 << 18)
+#define XHCI_PME_STUCK_QUIRK	(1 << 20)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index ed8adb0..358d2d6 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -52,6 +52,7 @@ static int usb_serial_device_probe(struct device *dev)
 {
 	struct usb_serial_driver *driver;
 	struct usb_serial_port *port;
+	struct device *tty_dev;
 	int retval = 0;
 	int minor;
 
@@ -71,12 +72,20 @@ static int usb_serial_device_probe(struct device *dev)
 	retval = device_create_file(dev, &dev_attr_port_number);
 	if (retval) {
 		if (driver->port_remove)
-			retval = driver->port_remove(port);
+			driver->port_remove(port);
 		goto exit;
 	}
 
 	minor = port->number;
-	tty_register_device(usb_serial_tty_driver, minor, dev);
+	tty_dev = tty_register_device(usb_serial_tty_driver, minor, dev);
+	if (IS_ERR(tty_dev)) {
+		retval = PTR_ERR(tty_dev);
+		device_remove_file(dev, &dev_attr_port_number);
+		if (driver->port_remove)
+			driver->port_remove(port);
+		goto exit;
+	}
+
 	dev_info(&port->serial->dev->dev,
 		 "%s converter now attached to ttyUSB%d\n",
 		 driver->description, minor);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 8137937..5c289fc 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -63,6 +63,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
 	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
 	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
+	{ USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
 	{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
 	{ USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
 	{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
@@ -152,6 +153,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
 	{ USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
 	{ USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
+	{ USB_DEVICE(0x16C0, 0x09B0) }, /* Lunatico Seletek */
+	{ USB_DEVICE(0x16C0, 0x09B1) }, /* Lunatico Seletek */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
 	{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4bfcfa7..06abee6 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -628,6 +628,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) },
 	/*
 	 * ELV devices:
 	 */
@@ -823,6 +824,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
+	{ USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID),
@@ -1000,6 +1003,23 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
 	/* GE Healthcare devices */
 	{ USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
+	/* Active Research (Actisense) devices */
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_NDC_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_USG_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_NGT_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_NGW_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AC_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AD_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AE_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AF_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEAGAUGE_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASWITCH_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_NMEA2000_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ETHERNET_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_WIFI_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) },
+	{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -1930,8 +1950,12 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
 
 	dbg("%s", __func__);
 
-	if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
-	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100V2")))
+	if (udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems"))
+		return ftdi_jtag_probe(serial);
+
+	if (udev->product &&
+		(!strcmp(udev->product, "BeagleBone/XDS100V2") ||
+		 !strcmp(udev->product, "SNAP Connect E10")))
 		return ftdi_jtag_probe(serial);
 
 	return 0;
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index ecb4dee..105b982 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -38,6 +38,9 @@
 
 #define FTDI_LUMEL_PD12_PID	0x6002
 
+/* Cyber Cortex AV by Fabulous Silicon (http://fabuloussilicon.com) */
+#define CYBER_CORTEX_AV_PID	0x8698
+
 /*
  * Marvell OpenRD Base, Client
  * http://www.open-rd.org
@@ -558,6 +561,12 @@
  */
 #define FTDI_NT_ORIONLXM_PID	0x7c90	/* OrionLXm Substation Automation Platform */
 
+/*
+ * Synapse Wireless product ids (FTDI_VID)
+ * http://www.synapse-wireless.com
+ */
+#define FTDI_SYNAPSE_SS200_PID 0x9090 /* SS200 - SNAP Stick 200 */
+
 
 /********************************/
 /** third-party VID/PID combos **/
@@ -1432,3 +1441,23 @@
  */
 #define GE_HEALTHCARE_VID		0x1901
 #define GE_HEALTHCARE_NEMO_TRACKER_PID	0x0015
+
+/*
+ * Active Research (Actisense) devices
+ */
+#define ACTISENSE_NDC_PID		0xD9A8 /* NDC USB Serial Adapter */
+#define ACTISENSE_USG_PID		0xD9A9 /* USG USB Serial Adapter */
+#define ACTISENSE_NGT_PID		0xD9AA /* NGT NMEA2000 Interface */
+#define ACTISENSE_NGW_PID		0xD9AB /* NGW NMEA2000 Gateway */
+#define ACTISENSE_D9AC_PID		0xD9AC /* Actisense Reserved */
+#define ACTISENSE_D9AD_PID		0xD9AD /* Actisense Reserved */
+#define ACTISENSE_D9AE_PID		0xD9AE /* Actisense Reserved */
+#define ACTISENSE_D9AF_PID		0xD9AF /* Actisense Reserved */
+#define CHETCO_SEAGAUGE_PID		0xA548 /* SeaGauge USB Adapter */
+#define CHETCO_SEASWITCH_PID		0xA549 /* SeaSwitch USB Adapter */
+#define CHETCO_SEASMART_NMEA2000_PID	0xA54A /* SeaSmart NMEA2000 Gateway */
+#define CHETCO_SEASMART_ETHERNET_PID	0xA54B /* SeaSmart Ethernet Gateway */
+#define CHETCO_SEASMART_WIFI_PID	0xA5AC /* SeaSmart Wifi Gateway */
+#define CHETCO_SEASMART_DISPLAY_PID	0xA5AD /* SeaSmart NMEA2000 Display */
+#define CHETCO_SEASMART_LITE_PID	0xA5AE /* SeaSmart Lite USB Adapter */
+#define CHETCO_SEASMART_ANALOG_PID	0xA5AF /* SeaSmart Analog Adapter */
diff --git a/drivers/video/arkfb.c b/drivers/video/arkfb.c
index 555dd4c..65196fe 100644
--- a/drivers/video/arkfb.c
+++ b/drivers/video/arkfb.c
@@ -1014,7 +1014,7 @@ static int __devinit ark_pci_probe(struct pci_dev *dev, const struct pci_device_
 
 	vga_res.flags = IORESOURCE_IO;
 
-	pcibios_bus_to_resource(dev, &vga_res, &bus_reg);
+	pcibios_bus_to_resource(dev->bus, &vga_res, &bus_reg);
 
 	par->state.vgabase = (void __iomem *) vga_res.start;
 
diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c
index 2c80246..7b7af8c 100644
--- a/drivers/video/s3fb.c
+++ b/drivers/video/s3fb.c
@@ -1172,7 +1172,7 @@ static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_i
 
 	vga_res.flags = IORESOURCE_IO;
 
-	pcibios_bus_to_resource(dev, &vga_res, &bus_reg);
+	pcibios_bus_to_resource(dev->bus, &vga_res, &bus_reg);
 
 	par->state.vgabase = (void __iomem *) vga_res.start;
 
diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c
index 4e74d26..dfecf02 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/vt8623fb.c
@@ -727,7 +727,7 @@ static int __devinit vt8623_pci_probe(struct pci_dev *dev, const struct pci_devi
 
 	vga_res.flags = IORESOURCE_IO;
 
-	pcibios_bus_to_resource(dev, &vga_res, &bus_reg);
+	pcibios_bus_to_resource(dev->bus, &vga_res, &bus_reg);
 
 	par->state.vgabase = (void __iomem *) vga_res.start;
 
diff --git a/drivers/xen/xen-pciback/conf_space.c b/drivers/xen/xen-pciback/conf_space.c
index 30d7be0..bb8cb69 100644
--- a/drivers/xen/xen-pciback/conf_space.c
+++ b/drivers/xen/xen-pciback/conf_space.c
@@ -16,8 +16,8 @@
 #include "conf_space.h"
 #include "conf_space_quirks.h"
 
-static bool permissive;
-module_param(permissive, bool, 0644);
+bool xen_pcibk_permissive;
+module_param_named(permissive, xen_pcibk_permissive, bool, 0644);
 
 /* This is where xen_pcibk_read_config_byte, xen_pcibk_read_config_word,
  * xen_pcibk_write_config_word, and xen_pcibk_write_config_byte are created. */
@@ -262,7 +262,7 @@ int xen_pcibk_config_write(struct pci_dev *dev, int offset, int size, u32 value)
 		 * This means that some fields may still be read-only because
 		 * they have entries in the config_field list that intercept
 		 * the write and do nothing. */
-		if (dev_data->permissive || permissive) {
+		if (dev_data->permissive || xen_pcibk_permissive) {
 			switch (size) {
 			case 1:
 				err = pci_write_config_byte(dev, offset,
diff --git a/drivers/xen/xen-pciback/conf_space.h b/drivers/xen/xen-pciback/conf_space.h
index e56c934..62461a8 100644
--- a/drivers/xen/xen-pciback/conf_space.h
+++ b/drivers/xen/xen-pciback/conf_space.h
@@ -64,6 +64,8 @@ struct config_field_entry {
 	void *data;
 };
 
+extern bool xen_pcibk_permissive;
+
 #define OFFSET(cfg_entry) ((cfg_entry)->base_offset+(cfg_entry)->field->offset)
 
 /* Add fields to a device - the add_fields macro expects to get a pointer to
diff --git a/drivers/xen/xen-pciback/conf_space_header.c b/drivers/xen/xen-pciback/conf_space_header.c
index 3daf862..1667a90 100644
--- a/drivers/xen/xen-pciback/conf_space_header.c
+++ b/drivers/xen/xen-pciback/conf_space_header.c
@@ -9,6 +9,10 @@
 #include "pciback.h"
 #include "conf_space.h"
 
+struct pci_cmd_info {
+	u16 val;
+};
+
 struct pci_bar_info {
 	u32 val;
 	u32 len_val;
@@ -18,22 +22,36 @@ struct pci_bar_info {
 #define is_enable_cmd(value) ((value)&(PCI_COMMAND_MEMORY|PCI_COMMAND_IO))
 #define is_master_cmd(value) ((value)&PCI_COMMAND_MASTER)
 
-static int command_read(struct pci_dev *dev, int offset, u16 *value, void *data)
+/* Bits guests are allowed to control in permissive mode. */
+#define PCI_COMMAND_GUEST (PCI_COMMAND_MASTER|PCI_COMMAND_SPECIAL| \
+			   PCI_COMMAND_INVALIDATE|PCI_COMMAND_VGA_PALETTE| \
+			   PCI_COMMAND_WAIT|PCI_COMMAND_FAST_BACK)
+
+static void *command_init(struct pci_dev *dev, int offset)
 {
-	int i;
-	int ret;
-
-	ret = xen_pcibk_read_config_word(dev, offset, value, data);
-	if (!pci_is_enabled(dev))
-		return ret;
-
-	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
-		if (dev->resource[i].flags & IORESOURCE_IO)
-			*value |= PCI_COMMAND_IO;
-		if (dev->resource[i].flags & IORESOURCE_MEM)
-			*value |= PCI_COMMAND_MEMORY;
+	struct pci_cmd_info *cmd = kmalloc(sizeof(*cmd), GFP_KERNEL);
+	int err;
+
+	if (!cmd)
+		return ERR_PTR(-ENOMEM);
+
+	err = pci_read_config_word(dev, PCI_COMMAND, &cmd->val);
+	if (err) {
+		kfree(cmd);
+		return ERR_PTR(err);
 	}
 
+	return cmd;
+}
+
+static int command_read(struct pci_dev *dev, int offset, u16 *value, void *data)
+{
+	int ret = pci_read_config_word(dev, offset, value);
+	const struct pci_cmd_info *cmd = data;
+
+	*value &= PCI_COMMAND_GUEST;
+	*value |= cmd->val & ~PCI_COMMAND_GUEST;
+
 	return ret;
 }
 
@@ -41,6 +59,8 @@ static int command_write(struct pci_dev *dev, int offset, u16 value, void *data)
 {
 	struct xen_pcibk_dev_data *dev_data;
 	int err;
+	u16 val;
+	struct pci_cmd_info *cmd = data;
 
 	dev_data = pci_get_drvdata(dev);
 	if (!pci_is_enabled(dev) && is_enable_cmd(value)) {
@@ -83,6 +103,19 @@ static int command_write(struct pci_dev *dev, int offset, u16 value, void *data)
 		}
 	}
 
+	cmd->val = value;
+
+	if (!xen_pcibk_permissive && (!dev_data || !dev_data->permissive))
+		return 0;
+
+	/* Only allow the guest to control certain bits. */
+	err = pci_read_config_word(dev, offset, &val);
+	if (err || val == value)
+		return err;
+
+	value &= PCI_COMMAND_GUEST;
+	value |= val & ~PCI_COMMAND_GUEST;
+
 	return pci_write_config_word(dev, offset, value);
 }
 
@@ -282,6 +315,8 @@ static const struct config_field header_common[] = {
 	{
 	 .offset    = PCI_COMMAND,
 	 .size      = 2,
+	 .init      = command_init,
+	 .release   = bar_release,
 	 .u.w.read  = command_read,
 	 .u.w.write = command_write,
 	},
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index aa9103f..ace3eea 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -95,7 +95,7 @@ static int check_dev_ioctl_version(int cmd, struct autofs_dev_ioctl *param)
  */
 static struct autofs_dev_ioctl *copy_dev_ioctl(struct autofs_dev_ioctl __user *in)
 {
-	struct autofs_dev_ioctl tmp;
+	struct autofs_dev_ioctl tmp, *res;
 
 	if (copy_from_user(&tmp, in, sizeof(tmp)))
 		return ERR_PTR(-EFAULT);
@@ -103,7 +103,14 @@ static struct autofs_dev_ioctl *copy_dev_ioctl(struct autofs_dev_ioctl __user *i
 	if (tmp.size < sizeof(tmp))
 		return ERR_PTR(-EINVAL);
 
-	return memdup_user(in, tmp.size);
+	if (tmp.size > (PATH_MAX + sizeof(tmp)))
+		return ERR_PTR(-ENAMETOOLONG);
+
+	res = memdup_user(in, tmp.size);
+	if (!IS_ERR(res))
+		res->size = tmp.size;
+
+	return res;
 }
 
 static inline void free_dev_ioctl(struct autofs_dev_ioctl *param)
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 0898d99..f069765 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1613,6 +1613,7 @@ refind_writable:
 			cifsFileInfo_put(inv_file);
 			spin_lock(&cifs_file_list_lock);
 			++refind;
+			inv_file = NULL;
 			goto refind_writable;
 		}
 	}
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index 47d64e9..7b65755 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -238,10 +238,19 @@ static int debugfs_show_options(struct seq_file *m, struct dentry *root)
 	return 0;
 }
 
+static void debugfs_evict_inode(struct inode *inode)
+{
+	truncate_inode_pages(&inode->i_data, 0);
+	end_writeback(inode);
+	if (S_ISLNK(inode->i_mode))
+		kfree(inode->i_private);
+}
+
 static const struct super_operations debugfs_super_operations = {
 	.statfs		= simple_statfs,
 	.remount_fs	= debugfs_remount,
 	.show_options	= debugfs_show_options,
+	.evict_inode	= debugfs_evict_inode,
 };
 
 static int debug_fill_super(struct super_block *sb, void *data, int silent)
@@ -459,23 +468,14 @@ static int __debugfs_remove(struct dentry *dentry, struct dentry *parent)
 	int ret = 0;
 
 	if (debugfs_positive(dentry)) {
-		if (dentry->d_inode) {
-			dget(dentry);
-			switch (dentry->d_inode->i_mode & S_IFMT) {
-			case S_IFDIR:
-				ret = simple_rmdir(parent->d_inode, dentry);
-				break;
-			case S_IFLNK:
-				kfree(dentry->d_inode->i_private);
-				/* fall through */
-			default:
-				simple_unlink(parent->d_inode, dentry);
-				break;
-			}
-			if (!ret)
-				d_delete(dentry);
-			dput(dentry);
-		}
+		dget(dentry);
+		if (S_ISDIR(dentry->d_inode->i_mode))
+			ret = simple_rmdir(parent->d_inode, dentry);
+		else
+			simple_unlink(parent->d_inode, dentry);
+		if (!ret)
+			d_delete(dentry);
+		dput(dentry);
 	}
 	return ret;
 }
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index f04aa33..e33e0e4 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -306,9 +306,22 @@ ecryptfs_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 	if (ecryptfs_file_to_private(file))
 		lower_file = ecryptfs_file_to_lower(file);
-	if (lower_file && lower_file->f_op && lower_file->f_op->unlocked_ioctl)
+	if (!(lower_file && lower_file->f_op && lower_file->f_op->unlocked_ioctl))
+		return rc;
+
+	switch (cmd) {
+	case FITRIM:
+	case FS_IOC_GETFLAGS:
+	case FS_IOC_SETFLAGS:
+	case FS_IOC_GETVERSION:
+	case FS_IOC_SETVERSION:
 		rc = lower_file->f_op->unlocked_ioctl(lower_file, cmd, arg);
-	return rc;
+		fsstack_copy_attr_all(file->f_path.dentry->d_inode,
+				      lower_file->f_path.dentry->d_inode);
+		return rc;
+	default:
+		return rc;
+	}
 }
 
 #ifdef CONFIG_COMPAT
@@ -320,9 +333,22 @@ ecryptfs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 	if (ecryptfs_file_to_private(file))
 		lower_file = ecryptfs_file_to_lower(file);
-	if (lower_file && lower_file->f_op && lower_file->f_op->compat_ioctl)
+	if (!(lower_file && lower_file->f_op && lower_file->f_op->compat_ioctl))
+		return rc;
+
+	switch (cmd) {
+	case FITRIM:
+	case FS_IOC32_GETFLAGS:
+	case FS_IOC32_SETFLAGS:
+	case FS_IOC32_GETVERSION:
+	case FS_IOC32_SETVERSION:
 		rc = lower_file->f_op->compat_ioctl(lower_file, cmd, arg);
-	return rc;
+		fsstack_copy_attr_all(file->f_path.dentry->d_inode,
+				      lower_file->f_path.dentry->d_inode);
+		return rc;
+	default:
+		return rc;
+	}
 }
 #endif
 
diff --git a/fs/exec.c b/fs/exec.c
index 5b9dfbe..91d238f 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1248,6 +1248,45 @@ void install_exec_creds(struct linux_binprm *bprm)
 }
 EXPORT_SYMBOL(install_exec_creds);
 
+static void bprm_fill_uid(struct linux_binprm *bprm)
+{
+	struct inode *inode;
+	unsigned int mode;
+	uid_t uid;
+	gid_t gid;
+
+	/* clear any previous set[ug]id data from a previous binary */
+	bprm->cred->euid = current_euid();
+	bprm->cred->egid = current_egid();
+
+	if (bprm->file->f_path.mnt->mnt_flags & MNT_NOSUID)
+		return;
+
+	inode = bprm->file->f_path.dentry->d_inode;
+	mode = ACCESS_ONCE(inode->i_mode);
+	if (!(mode & (S_ISUID|S_ISGID)))
+		return;
+
+	/* Be careful if suid/sgid is set */
+	mutex_lock(&inode->i_mutex);
+
+	/* reload atomically mode/uid/gid now that lock held */
+	mode = inode->i_mode;
+	uid = inode->i_uid;
+	gid = inode->i_gid;
+	mutex_unlock(&inode->i_mutex);
+
+	if (mode & S_ISUID) {
+		bprm->per_clear |= PER_CLEAR_ON_SETID;
+		bprm->cred->euid = uid;
+	}
+
+	if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) {
+		bprm->per_clear |= PER_CLEAR_ON_SETID;
+		bprm->cred->egid = gid;
+	}
+}
+
 /*
  * determine how safe it is to execute the proposed program
  * - the caller must hold ->cred_guard_mutex to protect against
@@ -1297,36 +1336,12 @@ static int check_unsafe_exec(struct linux_binprm *bprm)
  */
 int prepare_binprm(struct linux_binprm *bprm)
 {
-	umode_t mode;
-	struct inode * inode = bprm->file->f_path.dentry->d_inode;
 	int retval;
 
-	mode = inode->i_mode;
 	if (bprm->file->f_op == NULL)
 		return -EACCES;
 
-	/* clear any previous set[ug]id data from a previous binary */
-	bprm->cred->euid = current_euid();
-	bprm->cred->egid = current_egid();
-
-	if (!(bprm->file->f_path.mnt->mnt_flags & MNT_NOSUID)) {
-		/* Set-uid? */
-		if (mode & S_ISUID) {
-			bprm->per_clear |= PER_CLEAR_ON_SETID;
-			bprm->cred->euid = inode->i_uid;
-		}
-
-		/* Set-gid? */
-		/*
-		 * If setgid is set but no group execute bit then this
-		 * is a candidate for mandatory locking, not a setgid
-		 * executable.
-		 */
-		if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) {
-			bprm->per_clear |= PER_CLEAR_ON_SETID;
-			bprm->cred->egid = inode->i_gid;
-		}
-	}
+	bprm_fill_uid(bprm);
 
 	/* fill in binprm security blob */
 	retval = security_bprm_set_creds(bprm);
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index f4246cf..0949b83 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -717,8 +717,8 @@ static int fuse_try_move_page(struct fuse_copy_state *cs, struct page **pagep)
 
 	newpage = buf->page;
 
-	if (WARN_ON(!PageUptodate(newpage)))
-		return -EIO;
+	if (!PageUptodate(newpage))
+		SetPageUptodate(newpage);
 
 	ClearPageMappedToDisk(newpage);
 
@@ -1634,6 +1634,9 @@ copy_finish:
 static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code,
 		       unsigned int size, struct fuse_copy_state *cs)
 {
+	/* Don't try to move pages (yet) */
+	cs->move_pages = 0;
+
 	switch (code) {
 	case FUSE_NOTIFY_POLL:
 		return fuse_notify_poll(fc, size, cs);
diff --git a/fs/hfsplus/brec.c b/fs/hfsplus/brec.c
index 2a734cf..7429c40 100644
--- a/fs/hfsplus/brec.c
+++ b/fs/hfsplus/brec.c
@@ -130,13 +130,16 @@ skip:
 	hfs_bnode_write(node, entry, data_off + key_len, entry_len);
 	hfs_bnode_dump(node);
 
-	if (new_node) {
-		/* update parent key if we inserted a key
-		 * at the start of the first node
-		 */
-		if (!rec && new_node != node)
-			hfs_brec_update_parent(fd);
+	/*
+	 * update parent key if we inserted a key
+	 * at the start of the node and it is not the new node
+	 */
+	if (!rec && new_node != node) {
+		hfs_bnode_read_key(node, fd->search_key, data_off + size);
+		hfs_brec_update_parent(fd);
+	}
 
+	if (new_node) {
 		hfs_bnode_put(fd->bnode);
 		if (!new_node->parent) {
 			hfs_btree_inc_height(tree);
@@ -166,9 +169,6 @@ skip:
 		goto again;
 	}
 
-	if (!rec)
-		hfs_brec_update_parent(fd);
-
 	return 0;
 }
 
@@ -368,6 +368,8 @@ again:
 	if (IS_ERR(parent))
 		return PTR_ERR(parent);
 	__hfs_brec_find(parent, fd);
+	if (fd->record < 0)
+		return -ENOENT;
 	hfs_bnode_dump(parent);
 	rec = fd->record;
 
diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
index 7654e87..9ad5ba4 100644
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -510,6 +510,10 @@ static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblo
 				sumlen = c->sector_size - je32_to_cpu(sm->offset);
 				sumptr = buf + buf_size - sumlen;
 
+				/* sm->offset maybe wrong but MAGIC maybe right */
+				if (sumlen > c->sector_size)
+					goto full_scan;
+
 				/* Now, make sure the summary itself is available */
 				if (sumlen > buf_size) {
 					/* Need to kmalloc for this. */
@@ -544,6 +548,7 @@ static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblo
 		}
 	}
 
+full_scan:
 	buf_ofs = jeb->offset;
 
 	if (!buf_size) {
diff --git a/fs/namei.c b/fs/namei.c
index 5974fb5..bdcd705 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -579,7 +579,8 @@ static __always_inline int __vfs_follow_link(struct nameidata *nd, const char *l
 		goto fail;
 
 	if (*link == '/') {
-		set_root(nd);
+		if (!nd->root.mnt)
+			set_root(nd);
 		path_put(&nd->path);
 		nd->path = nd->root;
 		path_get(&nd->root);
diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index 27c2969..3abfd5a 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -463,8 +463,10 @@ static __be32 decode_cb_sequence_args(struct svc_rqst *rqstp,
 
 		for (i = 0; i < args->csa_nrclists; i++) {
 			status = decode_rc_list(xdr, &args->csa_rclists[i]);
-			if (status)
+			if (status) {
+				args->csa_nrclists = i;
 				goto out_free;
+			}
 		}
 	}
 	status = 0;
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index 16d16e5..62261de 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -148,8 +148,8 @@ void nfs_inode_reclaim_delegation(struct inode *inode, struct rpc_cred *cred,
 				  &delegation->flags);
 			NFS_I(inode)->delegation_state = delegation->type;
 			spin_unlock(&delegation->lock);
-			put_rpccred(oldcred);
 			rcu_read_unlock();
+			put_rpccred(oldcred);
 		} else {
 			/* We appear to have raced with a delegation return. */
 			spin_unlock(&delegation->lock);
diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c
index b2e3ff3..ecdbae1 100644
--- a/fs/nilfs2/btree.c
+++ b/fs/nilfs2/btree.c
@@ -31,6 +31,8 @@
 #include "alloc.h"
 #include "dat.h"
 
+static void __nilfs_btree_init(struct nilfs_bmap *bmap);
+
 static struct nilfs_btree_path *nilfs_btree_alloc_path(void)
 {
 	struct nilfs_btree_path *path;
@@ -368,6 +370,34 @@ static int nilfs_btree_node_broken(const struct nilfs_btree_node *node,
 	return ret;
 }
 
+/**
+ * nilfs_btree_root_broken - verify consistency of btree root node
+ * @node: btree root node to be examined
+ * @ino: inode number
+ *
+ * Return Value: If node is broken, 1 is returned. Otherwise, 0 is returned.
+ */
+static int nilfs_btree_root_broken(const struct nilfs_btree_node *node,
+				   unsigned long ino)
+{
+	int level, flags, nchildren;
+	int ret = 0;
+
+	level = nilfs_btree_node_get_level(node);
+	flags = nilfs_btree_node_get_flags(node);
+	nchildren = nilfs_btree_node_get_nchildren(node);
+
+	if (unlikely(level < NILFS_BTREE_LEVEL_NODE_MIN ||
+		     level > NILFS_BTREE_LEVEL_MAX ||
+		     nchildren < 0 ||
+		     nchildren > NILFS_BTREE_ROOT_NCHILDREN_MAX)) {
+		pr_crit("NILFS: bad btree root (inode number=%lu): level = %d, flags = 0x%x, nchildren = %d\n",
+			ino, level, flags, nchildren);
+		ret = 1;
+	}
+	return ret;
+}
+
 int nilfs_btree_broken_node_block(struct buffer_head *bh)
 {
 	int ret;
@@ -1713,7 +1743,7 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *btree,
 
 	/* convert and insert */
 	dat = NILFS_BMAP_USE_VBN(btree) ? nilfs_bmap_get_dat(btree) : NULL;
-	nilfs_btree_init(btree);
+	__nilfs_btree_init(btree);
 	if (nreq != NULL) {
 		nilfs_bmap_commit_alloc_ptr(btree, dreq, dat);
 		nilfs_bmap_commit_alloc_ptr(btree, nreq, dat);
@@ -2294,12 +2324,23 @@ static const struct nilfs_bmap_operations nilfs_btree_ops_gc = {
 	.bop_gather_data	=	NULL,
 };
 
-int nilfs_btree_init(struct nilfs_bmap *bmap)
+static void __nilfs_btree_init(struct nilfs_bmap *bmap)
 {
 	bmap->b_ops = &nilfs_btree_ops;
 	bmap->b_nchildren_per_block =
 		NILFS_BTREE_NODE_NCHILDREN_MAX(nilfs_btree_node_size(bmap));
-	return 0;
+}
+
+int nilfs_btree_init(struct nilfs_bmap *bmap)
+{
+	int ret = 0;
+
+	__nilfs_btree_init(bmap);
+
+	if (nilfs_btree_root_broken(nilfs_btree_get_root(bmap),
+				    bmap->b_inode->i_ino))
+		ret = -EIO;
+	return ret;
 }
 
 void nilfs_btree_init_gc(struct nilfs_bmap *bmap)
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 8021098..dc79934 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -2387,10 +2387,14 @@ out_dio:
 	/* buffered aio wouldn't have proper lock coverage today */
 	BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT));
 
+	if (unlikely(written <= 0))
+		goto no_sync;
+
 	if (((file->f_flags & O_DSYNC) && !direct_io) || IS_SYNC(inode) ||
 	    ((file->f_flags & O_DIRECT) && !direct_io)) {
-		ret = filemap_fdatawrite_range(file->f_mapping, *ppos,
-					       *ppos + count - 1);
+		ret = filemap_fdatawrite_range(file->f_mapping,
+					       iocb->ki_pos - written,
+					       iocb->ki_pos - 1);
 		if (ret < 0)
 			written = ret;
 
@@ -2403,10 +2407,12 @@ out_dio:
 		}
 
 		if (!ret)
-			ret = filemap_fdatawait_range(file->f_mapping, *ppos,
-						      *ppos + count - 1);
+			ret = filemap_fdatawait_range(file->f_mapping,
+						      iocb->ki_pos - written,
+						      iocb->ki_pos - 1);
 	}
 
+no_sync:
 	/*
 	 * deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io
 	 * function pointer which is called when o_direct io completes so that
@@ -2468,9 +2474,7 @@ static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe,
 	struct address_space *mapping = out->f_mapping;
 	struct inode *inode = mapping->host;
 	struct splice_desc sd = {
-		.total_len = len,
 		.flags = flags,
-		.pos = *ppos,
 		.u.file = out,
 	};
 
@@ -2480,6 +2484,12 @@ static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe,
 			out->f_path.dentry->d_name.len,
 			out->f_path.dentry->d_name.name, len);
 
+	ret = generic_write_checks(out, ppos, &len, 0);
+	if (ret)
+		return ret;
+	sd.total_len = len;
+	sd.pos = *ppos;
+
 	if (pipe->inode)
 		mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT);
 
diff --git a/fs/splice.c b/fs/splice.c
index bed6a3c..67c5210 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -991,13 +991,17 @@ generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
 	struct address_space *mapping = out->f_mapping;
 	struct inode *inode = mapping->host;
 	struct splice_desc sd = {
-		.total_len = len,
 		.flags = flags,
-		.pos = *ppos,
 		.u.file = out,
 	};
 	ssize_t ret;
 
+	ret = generic_write_checks(out, ppos, &len, S_ISBLK(inode->i_mode));
+	if (ret)
+		return ret;
+	sd.total_len = len;
+	sd.pos = *ppos;
+
 	pipe_lock(pipe);
 
 	splice_from_pipe_begin(&sd);
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 4053cbd..ddce23d 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -144,7 +144,9 @@ enum rq_flag_bits {
 	__REQ_ELVPRIV,		/* elevator private data attached */
 	__REQ_FAILED,		/* set if the request failed */
 	__REQ_QUIET,		/* don't worry about errors */
-	__REQ_PREEMPT,		/* set for "ide_preempt" requests */
+	__REQ_PREEMPT,		/* set for "ide_preempt" requests and also
+				   for requests for which the SCSI "quiesce"
+				   state must be ignored. */
 	__REQ_ALLOCED,		/* request came from our alloc pool */
 	__REQ_COPY_USER,	/* contains copies of user pages */
 	__REQ_FLUSH_SEQ,	/* request for flush sequence */
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index a6dfe69..fac26cb 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -101,8 +101,10 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir,
 		new_dir_mask |= FS_ISDIR;
 	}
 
-	fsnotify(old_dir, old_dir_mask, old_dir, FSNOTIFY_EVENT_INODE, old_name, fs_cookie);
-	fsnotify(new_dir, new_dir_mask, new_dir, FSNOTIFY_EVENT_INODE, new_name, fs_cookie);
+	fsnotify(old_dir, old_dir_mask, source, FSNOTIFY_EVENT_INODE, old_name,
+		 fs_cookie);
+	fsnotify(new_dir, new_dir_mask, source, FSNOTIFY_EVENT_INODE, new_name,
+		 fs_cookie);
 
 	if (target)
 		fsnotify_link_count(target);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index e444f5b..469c953 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -648,9 +648,9 @@ void pci_fixup_cardbus(struct pci_bus *);
 
 /* Generic PCI functions used internally */
 
-void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+void pcibios_resource_to_bus(struct pci_bus *bus, struct pci_bus_region *region,
 			     struct resource *res);
-void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+void pcibios_bus_to_resource(struct pci_bus *bus, struct resource *res,
 			     struct pci_bus_region *region);
 void pcibios_scan_specific_bus(int busn);
 extern struct pci_bus *pci_find_bus(int domain, int busnr);
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 815cc4b..feb77716 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -126,6 +126,7 @@ struct usb_hcd {
 	unsigned		wireless:1;	/* Wireless USB HCD */
 	unsigned		authorized_default:1;
 	unsigned		has_tt:1;	/* Integrated TT in root hub */
+	unsigned		cant_recv_wakeups:1;
 
 	unsigned int		irq;		/* irq allocated */
 	void __iomem		*regs;		/* device memory/io */
@@ -399,6 +400,7 @@ extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
 #endif /* CONFIG_PCI */
 
 /* pci-ish (pdev null is ok) buffer alloc/mapping support */
+void usb_init_pool_max(void);
 int hcd_buffer_create(struct usb_hcd *hcd);
 void hcd_buffer_destroy(struct usb_hcd *hcd);
 
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index 67b847d..d1342c2 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -2598,7 +2598,7 @@ static int kdb_summary(int argc, const char **argv)
 #define K(x) ((x) << (PAGE_SHIFT - 10))
 	kdb_printf("\nMemTotal:       %8lu kB\nMemFree:        %8lu kB\n"
 		   "Buffers:        %8lu kB\n",
-		   val.totalram, val.freeram, val.bufferram);
+		   K(val.totalram), K(val.freeram), K(val.bufferram));
 	return 0;
 }
 
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 0466297..461b6e0 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -3877,6 +3877,13 @@ static void perf_pending_event(struct irq_work *entry)
 {
 	struct perf_event *event = container_of(entry,
 			struct perf_event, pending);
+	int rctx;
+
+	rctx = perf_swevent_get_recursion_context();
+	/*
+	 * If we 'fail' here, that's OK, it means recursion is already disabled
+	 * and we won't recurse 'further'.
+	 */
 
 	if (event->pending_disable) {
 		event->pending_disable = 0;
@@ -3887,6 +3894,9 @@ static void perf_pending_event(struct irq_work *entry)
 		event->pending_wakeup = 0;
 		perf_event_wakeup(event);
 	}
+
+	if (rctx >= 0)
+		perf_swevent_put_recursion_context(rctx);
 }
 
 /*
diff --git a/kernel/printk.c b/kernel/printk.c
index 544c021..cb72d9c 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -126,7 +126,7 @@ static struct console *exclusive_console;
  */
 struct console_cmdline
 {
-	char	name[8];			/* Name of the driver	    */
+	char	name[16];			/* Name of the driver	    */
 	int	index;				/* Minor dev. to use	    */
 	char	*options;			/* Options for the driver   */
 #ifdef CONFIG_A11Y_BRAILLE_CONSOLE
@@ -1498,6 +1498,7 @@ void register_console(struct console *newcon)
 	 */
 	for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0];
 			i++) {
+		BUILD_BUG_ON(sizeof(console_cmdline[i].name) != sizeof(newcon->name));
 		if (strcmp(console_cmdline[i].name, newcon->name) != 0)
 			continue;
 		if (newcon->index >= 0 &&
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 5701cb9..2f8363e 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -4031,10 +4031,13 @@ void rt_mutex_setprio(struct task_struct *p, int prio)
 	if (running)
 		p->sched_class->put_prev_task(rq, p);
 
-	if (rt_prio(prio))
+	if (rt_prio(prio)) {
 		p->sched_class = &rt_sched_class;
-	else
+	} else {
+		if (rt_prio(oldprio))
+			p->rt.timeout = 0;
 		p->sched_class = &fair_sched_class;
+	}
 
 	p->prio = prio;
 
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 671f959..5cc401e 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -194,22 +194,28 @@ void local_bh_enable_ip(unsigned long ip)
 EXPORT_SYMBOL(local_bh_enable_ip);
 
 /*
- * We restart softirq processing MAX_SOFTIRQ_RESTART times,
- * and we fall back to softirqd after that.
+ * We restart softirq processing for at most MAX_SOFTIRQ_RESTART times,
+ * but break the loop if need_resched() is set or after 2 ms.
+ * The MAX_SOFTIRQ_TIME provides a nice upper bound in most cases, but in
+ * certain cases, such as stop_machine(), jiffies may cease to
+ * increment and so we need the MAX_SOFTIRQ_RESTART limit as
+ * well to make sure we eventually return from this method.
  *
- * This number has been established via experimentation.
+ * These limits have been established via experimentation. 
  * The two things to balance is latency against fairness -
  * we want to handle softirqs as soon as possible, but they
  * should not be able to lock up the box.
  */
+#define MAX_SOFTIRQ_TIME  msecs_to_jiffies(2)
 #define MAX_SOFTIRQ_RESTART 10
 
 asmlinkage void __do_softirq(void)
 {
 	struct softirq_action *h;
 	__u32 pending;
-	int max_restart = MAX_SOFTIRQ_RESTART;
+	unsigned long end = jiffies + MAX_SOFTIRQ_TIME;
 	int cpu;
+	int max_restart = MAX_SOFTIRQ_RESTART;
 
 	pending = local_softirq_pending();
 	account_system_vtime(current);
@@ -255,11 +261,13 @@ restart:
 	local_irq_disable();
 
 	pending = local_softirq_pending();
-	if (pending && --max_restart)
-		goto restart;
+	if (pending) {
+		if (time_before(jiffies, end) && !need_resched() &&
+		    --max_restart)
+			goto restart;
 
-	if (pending)
 		wakeup_softirqd();
+	}
 
 	lockdep_softirq_exit();
 
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 5b6bd45..ffea326 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1014,6 +1014,12 @@ ftrace_filter_lseek(struct file *file, loff_t offset, int whence)
 	return ret;
 }
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static int ftrace_graph_active;
+#else
+# define ftrace_graph_active 0
+#endif
+
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 #ifndef CONFIG_FTRACE_MCOUNT_RECORD
@@ -2056,24 +2062,36 @@ static int ftrace_shutdown(struct ftrace_ops *ops, int command)
 
 static void ftrace_startup_sysctl(void)
 {
+	int command;
+
 	if (unlikely(ftrace_disabled))
 		return;
 
 	/* Force update next time */
 	saved_ftrace_func = NULL;
 	/* ftrace_start_up is true if we want ftrace running */
-	if (ftrace_start_up)
-		ftrace_run_update_code(FTRACE_UPDATE_CALLS);
+	if (ftrace_start_up) {
+		command = FTRACE_UPDATE_CALLS;
+		if (ftrace_graph_active)
+			command |= FTRACE_START_FUNC_RET;
+		ftrace_startup_enable(command);
+	}
 }
 
 static void ftrace_shutdown_sysctl(void)
 {
+	int command;
+
 	if (unlikely(ftrace_disabled))
 		return;
 
 	/* ftrace_start_up is true if ftrace is running */
-	if (ftrace_start_up)
-		ftrace_run_update_code(FTRACE_DISABLE_CALLS);
+	if (ftrace_start_up) {
+		command = FTRACE_DISABLE_CALLS;
+		if (ftrace_graph_active)
+			command |= FTRACE_STOP_FUNC_RET;
+		ftrace_run_update_code(command);
+	}
 }
 
 static cycle_t		ftrace_update_time;
@@ -4445,12 +4463,12 @@ ftrace_enable_sysctl(struct ctl_table *table, int write,
 
 	if (ftrace_enabled) {
 
-		ftrace_startup_sysctl();
-
 		/* we are starting ftrace again */
 		if (ftrace_ops_list != &ftrace_list_end)
 			update_ftrace_function();
 
+		ftrace_startup_sysctl();
+
 	} else {
 		/* stopping ftrace calls (just send to ftrace_stub) */
 		ftrace_trace_function = ftrace_stub;
@@ -4465,7 +4483,6 @@ ftrace_enable_sysctl(struct ctl_table *table, int write,
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
-static int ftrace_graph_active;
 static struct notifier_block ftrace_suspend_notifier;
 
 int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace)
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index efd6820..bc36e28 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2401,9 +2401,10 @@ void __unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
 			continue;
 
 		/*
-		 * HWPoisoned hugepage is already unmapped and dropped reference
+		 * Migrating hugepage or HWPoisoned hugepage is already
+		 * unmapped and its refcount is dropped
 		 */
-		if (unlikely(is_hugetlb_entry_hwpoisoned(pte)))
+		if (unlikely(!pte_present(pte)))
 			continue;
 
 		page = pte_page(pte);
@@ -2813,6 +2814,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	struct page *pagecache_page = NULL;
 	static DEFINE_MUTEX(hugetlb_instantiation_mutex);
 	struct hstate *h = hstate_vma(vma);
+	int need_wait_lock = 0;
 
 	address &= huge_page_mask(h);
 
@@ -2846,6 +2848,16 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	ret = 0;
 
 	/*
+	 * entry could be a migration/hwpoison entry at this point, so this
+	 * check prevents the kernel from going below assuming that we have
+	 * a active hugepage in pagecache. This goto expects the 2nd page fault,
+	 * and is_hugetlb_entry_(migration|hwpoisoned) check will properly
+	 * handle it.
+	 */
+	if (!pte_present(entry))
+		goto out_mutex;
+
+	/*
 	 * If we are going to COW the mapping later, we examine the pending
 	 * reservations for this page now. This will ensure that any
 	 * allocations necessary to record that reservation occur outside the
@@ -2864,29 +2876,32 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 								vma, address);
 	}
 
+	spin_lock(&mm->page_table_lock);
+
+	/* Check for a racing update before calling hugetlb_cow */
+	if (unlikely(!pte_same(entry, huge_ptep_get(ptep))))
+		goto out_page_table_lock;
+
 	/*
 	 * hugetlb_cow() requires page locks of pte_page(entry) and
 	 * pagecache_page, so here we need take the former one
 	 * when page != pagecache_page or !pagecache_page.
-	 * Note that locking order is always pagecache_page -> page,
-	 * so no worry about deadlock.
 	 */
 	page = pte_page(entry);
-	get_page(page);
 	if (page != pagecache_page)
-		lock_page(page);
+		if (!trylock_page(page)) {
+			need_wait_lock = 1;
+			goto out_page_table_lock;
+	}
 
-	spin_lock(&mm->page_table_lock);
-	/* Check for a racing update before calling hugetlb_cow */
-	if (unlikely(!pte_same(entry, huge_ptep_get(ptep))))
-		goto out_page_table_lock;
+	get_page(page);
 
 
 	if (flags & FAULT_FLAG_WRITE) {
 		if (!pte_write(entry)) {
 			ret = hugetlb_cow(mm, vma, address, ptep, entry,
 							pagecache_page);
-			goto out_page_table_lock;
+			goto out_put_page;
 		}
 		entry = pte_mkdirty(entry);
 	}
@@ -2895,6 +2910,10 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 						flags & FAULT_FLAG_WRITE))
 		update_mmu_cache(vma, address, ptep);
 
+out_put_page:
+	if (page != pagecache_page)
+		unlock_page(page);
+	put_page(page);
 out_page_table_lock:
 	spin_unlock(&mm->page_table_lock);
 
@@ -3034,7 +3053,22 @@ void hugetlb_change_protection(struct vm_area_struct *vma,
 			continue;
 		if (huge_pmd_unshare(mm, &address, ptep))
 			continue;
-		if (!huge_pte_none(huge_ptep_get(ptep))) {
+		pte = huge_ptep_get(ptep);
+		if (unlikely(is_hugetlb_entry_hwpoisoned(pte)))
+			continue;
+		if (unlikely(is_hugetlb_entry_migration(pte))) {
+			swp_entry_t entry = pte_to_swp_entry(pte);
+
+			if (is_write_migration_entry(entry)) {
+				pte_t newpte;
+
+				make_migration_entry_read(&entry);
+				newpte = swp_entry_to_pte(entry);
+				set_huge_pte_at(mm, address, ptep, newpte);
+			}
+			continue;
+		}
+		if (!huge_pte_none(pte)) {
 			pte = huge_ptep_get_and_clear(mm, address, ptep);
 			pte = pte_mkhuge(pte_modify(pte, newprot));
 			set_huge_pte_at(mm, address, ptep, pte);
diff --git a/mm/memory.c b/mm/memory.c
index 45cd14f..02aef93 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3845,7 +3845,7 @@ int generic_access_phys(struct vm_area_struct *vma, unsigned long addr,
 	if (follow_phys(vma, addr, write, &prot, &phys_addr))
 		return -EINVAL;
 
-	maddr = ioremap_prot(phys_addr, PAGE_SIZE, prot);
+	maddr = ioremap_prot(phys_addr, PAGE_ALIGN(len + offset), prot);
 	if (write)
 		memcpy_toio(maddr + offset, buf, len);
 	else
diff --git a/mm/mmap.c b/mm/mmap.c
index 208e70f..cb6456d 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -112,7 +112,7 @@ struct percpu_counter vm_committed_as ____cacheline_aligned_in_smp;
  */
 int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin)
 {
-	unsigned long free, allowed;
+	long free, allowed;
 
 	vm_acct_memory(pages);
 
diff --git a/mm/nommu.c b/mm/nommu.c
index d3afb47..3f282f9 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1916,7 +1916,7 @@ EXPORT_SYMBOL(unmap_mapping_range);
  */
 int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin)
 {
-	unsigned long free, allowed;
+	long free, allowed;
 
 	vm_acct_memory(pages);
 
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 057884c..ecd1c4c 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -716,7 +716,7 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi,
 	 * scale global setpoint to bdi's:
 	 *	bdi_setpoint = setpoint * bdi_thresh / thresh
 	 */
-	x = div_u64((u64)bdi_thresh << 16, thresh + 1);
+	x = div_u64((u64)bdi_thresh << 16, thresh | 1);
 	bdi_setpoint = setpoint * (u64)x >> 16;
 	/*
 	 * Use span=(8*write_bw) in single bdi case as indicated by
@@ -766,8 +766,11 @@ static void bdi_update_write_bandwidth(struct backing_dev_info *bdi,
 	 *                   bw * elapsed + write_bandwidth * (period - elapsed)
 	 * write_bandwidth = ---------------------------------------------------
 	 *                                          period
+	 *
+	 * @written may have decreased due to account_page_redirty().
+	 * Avoid underflowing @bw calculation.
 	 */
-	bw = written - bdi->written_stamp;
+	bw = written - min(written, bdi->written_stamp);
 	bw *= HZ;
 	if (unlikely(elapsed > period)) {
 		do_div(bw, elapsed);
@@ -831,7 +834,7 @@ static void global_update_bandwidth(unsigned long thresh,
 				    unsigned long now)
 {
 	static DEFINE_SPINLOCK(dirty_lock);
-	static unsigned long update_time;
+	static unsigned long update_time = INITIAL_JIFFIES;
 
 	/*
 	 * check locklessly first to optimize away locking for the most time
diff --git a/mm/slub.c b/mm/slub.c
index 54ac6e9..aff0637 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1882,18 +1882,24 @@ redo:
 /* Unfreeze all the cpu partial slabs */
 static void unfreeze_partials(struct kmem_cache *s)
 {
-	struct kmem_cache_node *n = NULL;
+	struct kmem_cache_node *n = NULL, *n2 = NULL;
 	struct kmem_cache_cpu *c = this_cpu_ptr(s->cpu_slab);
 	struct page *page, *discard_page = NULL;
 
 	while ((page = c->partial)) {
-		enum slab_modes { M_PARTIAL, M_FREE };
-		enum slab_modes l, m;
 		struct page new;
 		struct page old;
 
 		c->partial = page->next;
-		l = M_FREE;
+
+		n2 = get_node(s, page_to_nid(page));
+		if (n != n2) {
+			if (n)
+				spin_unlock(&n->list_lock);
+
+			n = n2;
+			spin_lock(&n->list_lock);
+		}
 
 		do {
 
@@ -1906,43 +1912,17 @@ static void unfreeze_partials(struct kmem_cache *s)
 
 			new.frozen = 0;
 
-			if (!new.inuse && (!n || n->nr_partial > s->min_partial))
-				m = M_FREE;
-			else {
-				struct kmem_cache_node *n2 = get_node(s,
-							page_to_nid(page));
-
-				m = M_PARTIAL;
-				if (n != n2) {
-					if (n)
-						spin_unlock(&n->list_lock);
-
-					n = n2;
-					spin_lock(&n->list_lock);
-				}
-			}
-
-			if (l != m) {
-				if (l == M_PARTIAL) {
-					remove_partial(n, page);
-					stat(s, FREE_REMOVE_PARTIAL);
-				} else {
-					add_partial(n, page,
-						DEACTIVATE_TO_TAIL);
-					stat(s, FREE_ADD_PARTIAL);
-				}
-
-				l = m;
-			}
-
 		} while (!cmpxchg_double_slab(s, page,
 				old.freelist, old.counters,
 				new.freelist, new.counters,
 				"unfreezing slab"));
 
-		if (m == M_FREE) {
+		if (unlikely(!new.inuse && n->nr_partial > s->min_partial)) {
 			page->next = discard_page;
 			discard_page = page;
+		} else {
+			add_partial(n, page, DEACTIVATE_TO_TAIL);
+			stat(s, FREE_ADD_PARTIAL);
 		}
 	}
 
diff --git a/net/can/af_can.c b/net/can/af_can.c
index 0ce2ad0..7d9dff222 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -244,6 +244,9 @@ int can_send(struct sk_buff *skb, int loop)
 	}
 
 	skb->protocol = htons(ETH_P_CAN);
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 	skb_reset_transport_header(skb);
 
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 3cd37e9..43c6dd8 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1144,14 +1144,10 @@ static const struct nla_policy ifla_vfinfo_policy[IFLA_VF_INFO_MAX+1] = {
 };
 
 static const struct nla_policy ifla_vf_policy[IFLA_VF_MAX+1] = {
-	[IFLA_VF_MAC]		= { .type = NLA_BINARY,
-				    .len = sizeof(struct ifla_vf_mac) },
-	[IFLA_VF_VLAN]		= { .type = NLA_BINARY,
-				    .len = sizeof(struct ifla_vf_vlan) },
-	[IFLA_VF_TX_RATE]	= { .type = NLA_BINARY,
-				    .len = sizeof(struct ifla_vf_tx_rate) },
-	[IFLA_VF_SPOOFCHK]	= { .type = NLA_BINARY,
-				    .len = sizeof(struct ifla_vf_spoofchk) },
+	[IFLA_VF_MAC]		= { .len = sizeof(struct ifla_vf_mac) },
+	[IFLA_VF_VLAN]		= { .len = sizeof(struct ifla_vf_vlan) },
+	[IFLA_VF_TX_RATE]	= { .len = sizeof(struct ifla_vf_tx_rate) },
+	[IFLA_VF_SPOOFCHK]	= { .len = sizeof(struct ifla_vf_spoofchk) },
 };
 
 static const struct nla_policy ifla_port_policy[IFLA_PORT_MAX+1] = {
@@ -1698,10 +1694,10 @@ static int rtnl_group_changelink(struct net *net, int group,
 		struct ifinfomsg *ifm,
 		struct nlattr **tb)
 {
-	struct net_device *dev;
+	struct net_device *dev, *aux;
 	int err;
 
-	for_each_netdev(net, dev) {
+	for_each_netdev_safe(net, dev, aux) {
 		if (dev->group == group) {
 			err = do_setlink(dev, ifm, tb, NULL, 0);
 			if (err < 0)
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index c8643a3..4cfba3d 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -95,7 +95,7 @@ static u32 *ipv6_cow_metrics(struct dst_entry *dst, unsigned long old)
 	u32 *p = NULL;
 
 	if (!(rt->dst.flags & DST_HOST))
-		return NULL;
+		return dst_cow_metrics_generic(dst, old);
 
 	if (!rt->rt6i_peer)
 		rt6_bind_peer(rt, 1);
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index 6b9d5a0..20fec0d 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -843,7 +843,9 @@ static void ircomm_tty_wait_until_sent(struct tty_struct *tty, int timeout)
 	orig_jiffies = jiffies;
 
 	/* Set poll time to 200 ms */
-	poll_time = IRDA_MIN(timeout, msecs_to_jiffies(200));
+	poll_time = msecs_to_jiffies(200);
+	if (timeout)
+		poll_time = min_t(unsigned long, timeout, poll_time);
 
 	spin_lock_irqsave(&self->spinlock, flags);
 	while (self->tx_skb && self->tx_skb->len) {
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 64d3ce5..df2b6ac 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -49,8 +49,6 @@ static void ieee80211_free_tid_rx(struct rcu_head *h)
 		container_of(h, struct tid_ampdu_rx, rcu_head);
 	int i;
 
-	del_timer_sync(&tid_rx->reorder_timer);
-
 	for (i = 0; i < tid_rx->buf_size; i++)
 		dev_kfree_skb(tid_rx->reorder_buf[i]);
 	kfree(tid_rx->reorder_buf);
@@ -94,6 +92,12 @@ void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
 
 	del_timer_sync(&tid_rx->session_timer);
 
+	/* make sure ieee80211_sta_reorder_release() doesn't re-arm the timer */
+	spin_lock_bh(&tid_rx->reorder_lock);
+	tid_rx->removed = true;
+	spin_unlock_bh(&tid_rx->reorder_lock);
+	del_timer_sync(&tid_rx->reorder_timer);
+
 	call_rcu(&tid_rx->rcu_head, ieee80211_free_tid_rx);
 }
 
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 226be13..ca07c5e 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -54,11 +54,25 @@ struct ieee80211_local;
 
 #define TU_TO_EXP_TIME(x)	(jiffies + usecs_to_jiffies((x) * 1024))
 
-#define IEEE80211_DEFAULT_UAPSD_QUEUES \
-	(IEEE80211_WMM_IE_STA_QOSINFO_AC_BK |	\
-	 IEEE80211_WMM_IE_STA_QOSINFO_AC_BE |	\
-	 IEEE80211_WMM_IE_STA_QOSINFO_AC_VI |	\
-	 IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
+/*
+ * Some APs experience problems when working with U-APSD. Decreasing the
+ * probability of that happening by using legacy mode for all ACs but VO isn't
+ * enough.
+ *
+ * Cisco 4410N originally forced us to enable VO by default only because it
+ * treated non-VO ACs as legacy.
+ *
+ * However some APs (notably Netgear R7000) silently reclassify packets to
+ * different ACs. Since u-APSD ACs require trigger frames for frame retrieval
+ * clients would never see some frames (e.g. ARP responses) or would fetch them
+ * accidentally after a long time.
+ *
+ * It makes little sense to enable u-APSD queues by default because it needs
+ * userspace applications to be aware of it to actually take advantage of the
+ * possible additional powersavings. Implicitly depending on driver autotrigger
+ * frame support doesn't make much sense.
+ */
+#define IEEE80211_DEFAULT_UAPSD_QUEUES 0
 
 #define IEEE80211_DEFAULT_MAX_SP_LEN		\
 	IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 24f2a41..6202d05 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -668,9 +668,10 @@ static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw,
 
  set_release_timer:
 
-		mod_timer(&tid_agg_rx->reorder_timer,
-			  tid_agg_rx->reorder_time[j] + 1 +
-			  HT_RX_REORDER_BUF_TIMEOUT);
+		if (!tid_agg_rx->removed)
+			mod_timer(&tid_agg_rx->reorder_timer,
+				  tid_agg_rx->reorder_time[j] + 1 +
+				  HT_RX_REORDER_BUF_TIMEOUT);
 	} else {
 		del_timer(&tid_agg_rx->reorder_timer);
 	}
@@ -1926,6 +1927,9 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
 	hdr = (struct ieee80211_hdr *) skb->data;
 	mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen);
 
+	if (ieee80211_drop_unencrypted(rx, hdr->frame_control))
+		return RX_DROP_MONITOR;
+
 	/* frame is in RMC, don't forward */
 	if (ieee80211_is_data(hdr->frame_control) &&
 	    is_multicast_ether_addr(hdr->addr1) &&
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 249f4d0..4e6ece8 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -106,6 +106,7 @@ enum ieee80211_sta_info_flags {
  * @buf_size: reorder buffer size at receiver
  * @failed_bar_ssn: ssn of the last failed BAR tx attempt
  * @bar_pending: BAR needs to be re-sent
+ * @removed: this session is removed (but might have been found due to RCU)
  *
  * This structure's lifetime is managed by RCU, assignments to
  * the array holding it must hold the aggregation mutex.
@@ -169,6 +170,7 @@ struct tid_ampdu_rx {
 	u16 buf_size;
 	u16 timeout;
 	u8 dialog_token;
+	bool removed;
 };
 
 /**
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index b7fc3dd..f4f24be 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -544,9 +544,11 @@ ieee80211_tx_h_check_control_port_protocol(struct ieee80211_tx_data *tx)
 {
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
 
-	if (unlikely(tx->sdata->control_port_protocol == tx->skb->protocol &&
-		     tx->sdata->control_port_no_encrypt))
-		info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+	if (unlikely(tx->sdata->control_port_protocol == tx->skb->protocol)) {
+		if (tx->sdata->control_port_no_encrypt)
+			info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+		info->flags |= IEEE80211_TX_CTL_USE_MINRATE;
+	}
 
 	return TX_CONTINUE;
 }
diff --git a/net/netfilter/ipvs/ip_vs_ftp.c b/net/netfilter/ipvs/ip_vs_ftp.c
index e39f693..fe3c8d7 100644
--- a/net/netfilter/ipvs/ip_vs_ftp.c
+++ b/net/netfilter/ipvs/ip_vs_ftp.c
@@ -183,6 +183,8 @@ static int ip_vs_ftp_out(struct ip_vs_app *app, struct ip_vs_conn *cp,
 	struct nf_conn *ct;
 	struct net *net;
 
+	*diff = 0;
+
 #ifdef CONFIG_IP_VS_IPV6
 	/* This application helper doesn't work with IPv6 yet,
 	 * so turn this into a no-op for IPv6 packets
@@ -191,8 +193,6 @@ static int ip_vs_ftp_out(struct ip_vs_app *app, struct ip_vs_conn *cp,
 		return 1;
 #endif
 
-	*diff = 0;
-
 	/* Only useful for established sessions */
 	if (cp->state != IP_VS_TCP_S_ESTABLISHED)
 		return 1;
@@ -318,6 +318,9 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp,
 	struct ip_vs_conn *n_cp;
 	struct net *net;
 
+	/* no diff required for incoming packets */
+	*diff = 0;
+
 #ifdef CONFIG_IP_VS_IPV6
 	/* This application helper doesn't work with IPv6 yet,
 	 * so turn this into a no-op for IPv6 packets
@@ -326,9 +329,6 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp,
 		return 1;
 #endif
 
-	/* no diff required for incoming packets */
-	*diff = 0;
-
 	/* Only useful for established sessions */
 	if (cp->state != IP_VS_TCP_S_ESTABLISHED)
 		return 1;
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index 8a0d6d6..6a5555c 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -763,6 +763,8 @@ static void ip_vs_proc_conn(struct net *net, struct ip_vs_conn_param *param,
 			IP_VS_DBG(2, "BACKUP, add new conn. failed\n");
 			return;
 		}
+		if (!(flags & IP_VS_CONN_F_TEMPLATE))
+			kfree(param->pe_data);
 	} else if (!cp->dest) {
 		dest = ip_vs_try_bind_dest(cp);
 		if (dest)
@@ -1064,6 +1066,7 @@ static inline int ip_vs_proc_sync_conn(struct net *net, __u8 *p, __u8 *msg_end)
 				(opt_flags & IPVS_OPT_F_SEQ_DATA ? &opt : NULL)
 				);
 #endif
+	ip_vs_pe_put(param.pe);
 	return 0;
 	/* Error exit */
 out:
diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index ce60cf0..9139a26 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -255,7 +255,7 @@ int nf_queue(struct sk_buff *skb,
 	 * returned by nf_queue.  For instance, callers rely on -ECANCELED to mean
 	 * 'ignore this hook'.
 	 */
-	if (IS_ERR(segs))
+	if (IS_ERR_OR_NULL(segs))
 		goto out_err;
 	queued = 0;
 	err = 0;
diff --git a/net/netfilter/xt_socket.c b/net/netfilter/xt_socket.c
index 72bb07f..eb5086c 100644
--- a/net/netfilter/xt_socket.c
+++ b/net/netfilter/xt_socket.c
@@ -205,12 +205,13 @@ static int
 extract_icmp6_fields(const struct sk_buff *skb,
 		     unsigned int outside_hdrlen,
 		     int *protocol,
-		     struct in6_addr **raddr,
-		     struct in6_addr **laddr,
+		     const struct in6_addr **raddr,
+		     const struct in6_addr **laddr,
 		     __be16 *rport,
-		     __be16 *lport)
+		     __be16 *lport,
+		     struct ipv6hdr *ipv6_var)
 {
-	struct ipv6hdr *inside_iph, _inside_iph;
+	const struct ipv6hdr *inside_iph;
 	struct icmp6hdr *icmph, _icmph;
 	__be16 *ports, _ports[2];
 	u8 inside_nexthdr;
@@ -225,12 +226,14 @@ extract_icmp6_fields(const struct sk_buff *skb,
 	if (icmph->icmp6_type & ICMPV6_INFOMSG_MASK)
 		return 1;
 
-	inside_iph = skb_header_pointer(skb, outside_hdrlen + sizeof(_icmph), sizeof(_inside_iph), &_inside_iph);
+	inside_iph = skb_header_pointer(skb, outside_hdrlen + sizeof(_icmph),
+					sizeof(*ipv6_var), ipv6_var);
 	if (inside_iph == NULL)
 		return 1;
 	inside_nexthdr = inside_iph->nexthdr;
 
-	inside_hdrlen = ipv6_skip_exthdr(skb, outside_hdrlen + sizeof(_icmph) + sizeof(_inside_iph),
+	inside_hdrlen = ipv6_skip_exthdr(skb, outside_hdrlen + sizeof(_icmph) +
+					      sizeof(*ipv6_var),
 					 &inside_nexthdr, &inside_fragoff);
 	if (inside_hdrlen < 0)
 		return 1; /* hjm: Packet has no/incomplete transport layer headers. */
@@ -258,10 +261,10 @@ extract_icmp6_fields(const struct sk_buff *skb,
 static bool
 socket_mt6_v1(const struct sk_buff *skb, struct xt_action_param *par)
 {
-	struct ipv6hdr *iph = ipv6_hdr(skb);
+	struct ipv6hdr ipv6_var, *iph = ipv6_hdr(skb);
 	struct udphdr _hdr, *hp = NULL;
 	struct sock *sk;
-	struct in6_addr *daddr, *saddr;
+	const struct in6_addr *daddr, *saddr;
 	__be16 dport, sport;
 	int thoff, tproto;
 	const struct xt_socket_mtinfo1 *info = (struct xt_socket_mtinfo1 *) par->matchinfo;
@@ -285,7 +288,7 @@ socket_mt6_v1(const struct sk_buff *skb, struct xt_action_param *par)
 
 	} else if (tproto == IPPROTO_ICMPV6) {
 		if (extract_icmp6_fields(skb, thoff, &tproto, &saddr, &daddr,
-					 &sport, &dport))
+					 &sport, &dport, &ipv6_var))
 			return false;
 	} else {
 		return false;
diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c
index e66341e..a92d635 100644
--- a/net/openvswitch/datapath.c
+++ b/net/openvswitch/datapath.c
@@ -269,8 +269,10 @@ static int queue_gso_packets(int dp_ifindex, struct sk_buff *skb,
 	int err;
 
 	segs = skb_gso_segment(skb, NETIF_F_SG | NETIF_F_HW_CSUM);
-	if (IS_ERR(skb))
-		return PTR_ERR(skb);
+	if (IS_ERR(segs))
+		return PTR_ERR(segs);
+	if (segs == NULL)
+		return -EINVAL;
 
 	/* Queue all of the segments. */
 	skb = segs;
diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index 76cb304..af4dd9e 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -911,7 +911,7 @@ static unsigned int cache_poll(struct file *filp, poll_table *wait,
 	poll_wait(filp, &queue_wait, wait);
 
 	/* alway allow write */
-	mask = POLL_OUT | POLLWRNORM;
+	mask = POLLOUT | POLLWRNORM;
 
 	if (!rp)
 		return mask;
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 745973b..5547bd8 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -485,7 +485,7 @@ rpcrdma_ia_open(struct rpcrdma_xprt *xprt, struct sockaddr *addr, int memreg)
 	if (rc) {
 		dprintk("RPC:       %s: ib_query_device failed %d\n",
 			__func__, rc);
-		goto out2;
+		goto out3;
 	}
 
 	if (devattr.device_cap_flags & IB_DEVICE_LOCAL_DMA_LKEY) {
@@ -587,7 +587,7 @@ rpcrdma_ia_open(struct rpcrdma_xprt *xprt, struct sockaddr *addr, int memreg)
 		printk(KERN_ERR "%s: invalid memory registration mode %d\n",
 				__func__, memreg);
 		rc = -EINVAL;
-		goto out2;
+		goto out3;
 	}
 	dprintk("RPC:       %s: memory registration strategy is %d\n",
 		__func__, memreg);
@@ -596,6 +596,10 @@ rpcrdma_ia_open(struct rpcrdma_xprt *xprt, struct sockaddr *addr, int memreg)
 	ia->ri_memreg_strategy = memreg;
 
 	return 0;
+
+out3:
+	ib_dealloc_pd(ia->ri_pd);
+	ia->ri_pd = NULL;
 out2:
 	rdma_destroy_id(ia->ri_id);
 	ia->ri_id = NULL;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 63c1807..263cbd8 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2810,6 +2810,14 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 	if (parse_station_flags(info, dev->ieee80211_ptr->iftype, &params))
 		return -EINVAL;
 
+	/* HT requires QoS, but if we don't have that just ignore HT/VHT
+	 * as userspace might just pass through the capabilities from the IEs
+	 * directly, rather than enforcing this restriction and returning an
+	 * error in this case.
+	 */
+	if (!(params.sta_flags_set & BIT(NL80211_STA_FLAG_WME)))
+		params.ht_capa = NULL;
+
 	switch (dev->ieee80211_ptr->iftype) {
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_AP_VLAN:
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 95a338c..11dd2fb 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -151,6 +151,8 @@ static int xfrm_output_gso(struct sk_buff *skb)
 	kfree_skb(skb);
 	if (IS_ERR(segs))
 		return PTR_ERR(segs);
+	if (segs == NULL)
+		return -EINVAL;
 
 	do {
 		struct sk_buff *nskb = segs->next;
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index 0a9891e..3bf9045 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -150,7 +150,7 @@ static ssize_t sel_write_enforce(struct file *file, const char __user *buf,
 		goto out;
 
 	/* No partial writes. */
-	length = EINVAL;
+	length = -EINVAL;
 	if (*ppos != 0)
 		goto out;
 
diff --git a/security/smack/smack.h b/security/smack/smack.h
index 4ede719..cde4cc1 100644
--- a/security/smack/smack.h
+++ b/security/smack/smack.h
@@ -298,6 +298,16 @@ static inline char *smk_of_current(void)
 	return smk_of_task(current_security());
 }
 
+static inline char *smk_of_task_struct(const struct task_struct *t)
+{
+	char *skp;
+
+	rcu_read_lock();
+	skp = smk_of_task(__task_cred(t)->security);
+	rcu_read_unlock();
+	return skp;
+}
+
 /*
  * logging functions
  */
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 45c32f0..82df24d 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -41,8 +41,6 @@
 #include <linux/binfmts.h>
 #include "smack.h"
 
-#define task_security(task)	(task_cred_xxx((task), security))
-
 #define TRANS_TRUE	"TRUE"
 #define TRANS_TRUE_SIZE	4
 
@@ -164,7 +162,7 @@ static int smack_ptrace_access_check(struct task_struct *ctp, unsigned int mode)
 	if (rc != 0)
 		return rc;
 
-	tsp = smk_of_task(task_security(ctp));
+	tsp = smk_of_task_struct(ctp);
 	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK);
 	smk_ad_setfield_u_tsk(&ad, ctp);
 
@@ -190,7 +188,7 @@ static int smack_ptrace_traceme(struct task_struct *ptp)
 	if (rc != 0)
 		return rc;
 
-	tsp = smk_of_task(task_security(ptp));
+	tsp = smk_of_task_struct(ptp);
 	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK);
 	smk_ad_setfield_u_tsk(&ad, ptp);
 
@@ -1518,7 +1516,7 @@ static int smk_curacc_on_task(struct task_struct *p, int access,
 
 	smk_ad_init(&ad, caller, LSM_AUDIT_DATA_TASK);
 	smk_ad_setfield_u_tsk(&ad, p);
-	return smk_curacc(smk_of_task(task_security(p)), access, &ad);
+	return smk_curacc(smk_of_task_struct(p), access, &ad);
 }
 
 /**
@@ -1564,7 +1562,7 @@ static int smack_task_getsid(struct task_struct *p)
  */
 static void smack_task_getsecid(struct task_struct *p, u32 *secid)
 {
-	*secid = smack_to_secid(smk_of_task(task_security(p)));
+	*secid = smack_to_secid(smk_of_task_struct(p));
 }
 
 /**
@@ -1676,7 +1674,7 @@ static int smack_task_kill(struct task_struct *p, struct siginfo *info,
 	 * can write the receiver.
 	 */
 	if (secid == 0)
-		return smk_curacc(smk_of_task(task_security(p)), MAY_WRITE,
+		return smk_curacc(smk_of_task_struct(p), MAY_WRITE,
 				  &ad);
 	/*
 	 * If the secid isn't 0 we're dealing with some USB IO
@@ -1684,7 +1682,7 @@ static int smack_task_kill(struct task_struct *p, struct siginfo *info,
 	 * we can't take privilege into account.
 	 */
 	return smk_access(smack_from_secid(secid),
-			  smk_of_task(task_security(p)), MAY_WRITE, &ad);
+			  smk_of_task_struct(p), MAY_WRITE, &ad);
 }
 
 /**
@@ -1697,9 +1695,13 @@ static int smack_task_wait(struct task_struct *p)
 {
 	struct smk_audit_info ad;
 	char *sp = smk_of_current();
-	char *tsp = smk_of_forked(task_security(p));
+	char *tsp;
 	int rc;
 
+	rcu_read_lock();
+	tsp = smk_of_forked(__task_cred(p)->security);
+	rcu_read_unlock();
+
 	/* we don't log here, we can be overriden */
 	rc = smk_access(tsp, sp, MAY_WRITE, NULL);
 	if (rc == 0)
@@ -1736,7 +1738,7 @@ static int smack_task_wait(struct task_struct *p)
 static void smack_task_to_inode(struct task_struct *p, struct inode *inode)
 {
 	struct inode_smack *isp = inode->i_security;
-	isp->smk_inode = smk_of_task(task_security(p));
+	isp->smk_inode = smk_of_task_struct(p);
 }
 
 /*
@@ -2719,7 +2721,7 @@ static int smack_getprocattr(struct task_struct *p, char *name, char **value)
 	if (strcmp(name, "current") != 0)
 		return -EINVAL;
 
-	cp = kstrdup(smk_of_task(task_security(p)), GFP_KERNEL);
+	cp = kstrdup(smk_of_task_struct(p), GFP_KERNEL);
 	if (cp == NULL)
 		return -ENOMEM;
 
diff --git a/sound/core/control.c b/sound/core/control.c
index e773d5e..8fb4d24 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -1164,6 +1164,10 @@ static int snd_ctl_elem_add(struct snd_ctl_file *file,
 
 	if (info->count < 1)
 		return -EINVAL;
+	if (!*info->id.name)
+		return -EINVAL;
+	if (strnlen(info->id.name, sizeof(info->id.name)) >= sizeof(info->id.name))
+		return -EINVAL;
 	access = info->access == 0 ? SNDRV_CTL_ELEM_ACCESS_READWRITE :
 		(info->access & (SNDRV_CTL_ELEM_ACCESS_READWRITE|
 				 SNDRV_CTL_ELEM_ACCESS_INACTIVE|
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 3a90793..65195a1 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1382,6 +1382,8 @@ static int snd_pcm_do_drain_init(struct snd_pcm_substream *substream, int state)
 			if (! snd_pcm_playback_empty(substream)) {
 				snd_pcm_do_start(substream, SNDRV_PCM_STATE_DRAINING);
 				snd_pcm_post_start(substream, SNDRV_PCM_STATE_DRAINING);
+			} else {
+				runtime->status->state = SNDRV_PCM_STATE_SETUP;
 			}
 			break;
 		case SNDRV_PCM_STATE_RUNNING:
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 9461a00..b16a37f 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -759,7 +759,7 @@ static void alc_auto_setup_eapd(struct hda_codec *codec, bool on)
 {
 	/* We currently only handle front, HP */
 	static hda_nid_t pins[] = {
-		0x0f, 0x10, 0x14, 0x15, 0
+		0x0f, 0x10, 0x14, 0x15, 0x17, 0
 	};
 	hda_nid_t *p;
 	for (p = pins; *p; p++)
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 0481d94..c1cdd02 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -2026,32 +2026,43 @@ snd_riptide_joystick_probe(struct pci_dev *pci, const struct pci_device_id *id)
 {
 	static int dev;
 	struct gameport *gameport;
+	int ret;
 
 	if (dev >= SNDRV_CARDS)
 		return -ENODEV;
+
 	if (!enable[dev]) {
-		dev++;
-		return -ENOENT;
+		ret = -ENOENT;
+		goto inc_dev;
 	}
 
-	if (!joystick_port[dev++])
-		return 0;
+	if (!joystick_port[dev]) {
+		ret = 0;
+		goto inc_dev;
+	}
 
 	gameport = gameport_allocate_port();
-	if (!gameport)
-		return -ENOMEM;
+	if (!gameport) {
+		ret = -ENOMEM;
+		goto inc_dev;
+	}
 	if (!request_region(joystick_port[dev], 8, "Riptide gameport")) {
 		snd_printk(KERN_WARNING
 			   "Riptide: cannot grab gameport 0x%x\n",
 			   joystick_port[dev]);
 		gameport_free_port(gameport);
-		return -EBUSY;
+		ret = -EBUSY;
+		goto inc_dev;
 	}
 
 	gameport->io = joystick_port[dev];
 	gameport_register_port(gameport);
 	pci_set_drvdata(pci, gameport);
-	return 0;
+
+	ret = 0;
+inc_dev:
+	dev++;
+	return ret;
 }
 
 static void __devexit snd_riptide_joystick_remove(struct pci_dev *pci)
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index bc030a2..0627ffe 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -6042,6 +6042,12 @@ static int snd_hdspm_capture_open(struct snd_pcm_substream *substream)
 		snd_pcm_hw_constraint_minmax(runtime,
 					     SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
 					     64, 8192);
+		snd_pcm_hw_constraint_minmax(runtime,
+					     SNDRV_PCM_HW_PARAM_PERIODS,
+					     2, 2);
+		snd_pcm_hw_constraint_minmax(runtime,
+					     SNDRV_PCM_HW_PARAM_PERIODS,
+					     2, 2);
 		break;
 	}
 
diff --git a/sound/soc/codecs/adav80x.c b/sound/soc/codecs/adav80x.c
index ebd7b37..81e0e27 100644
--- a/sound/soc/codecs/adav80x.c
+++ b/sound/soc/codecs/adav80x.c
@@ -307,7 +307,7 @@ static int adav80x_put_deemph(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct adav80x *adav80x = snd_soc_codec_get_drvdata(codec);
-	unsigned int deemph = ucontrol->value.enumerated.item[0];
+	unsigned int deemph = ucontrol->value.integer.value[0];
 
 	if (deemph > 1)
 		return -EINVAL;
@@ -323,7 +323,7 @@ static int adav80x_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct adav80x *adav80x = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = adav80x->deemph;
+	ucontrol->value.integer.value[0] = adav80x->deemph;
 	return 0;
 };
 
diff --git a/sound/soc/codecs/ak4641.c b/sound/soc/codecs/ak4641.c
index c4d165a..e1773e0 100644
--- a/sound/soc/codecs/ak4641.c
+++ b/sound/soc/codecs/ak4641.c
@@ -74,7 +74,7 @@ static int ak4641_put_deemph(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct ak4641_priv *ak4641 = snd_soc_codec_get_drvdata(codec);
-	int deemph = ucontrol->value.enumerated.item[0];
+	int deemph = ucontrol->value.integer.value[0];
 
 	if (deemph > 1)
 		return -EINVAL;
@@ -90,7 +90,7 @@ static int ak4641_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct ak4641_priv *ak4641 = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = ak4641->deemph;
+	ucontrol->value.integer.value[0] = ak4641->deemph;
 	return 0;
 };
 
diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c
index bf71412..f9e2bda 100644
--- a/sound/soc/codecs/cs4271.c
+++ b/sound/soc/codecs/cs4271.c
@@ -261,7 +261,7 @@ static int cs4271_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct cs4271_private *cs4271 = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = cs4271->deemph;
+	ucontrol->value.integer.value[0] = cs4271->deemph;
 	return 0;
 }
 
@@ -271,7 +271,7 @@ static int cs4271_put_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct cs4271_private *cs4271 = snd_soc_codec_get_drvdata(codec);
 
-	cs4271->deemph = ucontrol->value.enumerated.item[0];
+	cs4271->deemph = ucontrol->value.integer.value[0];
 	return cs4271_set_deemph(codec);
 }
 
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 87cbf14..e8a7608f 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1107,13 +1107,7 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
 		/* Enable VDDC charge pump */
 		ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
 	} else if (vddio >= 3100 && vdda >= 3100) {
-		/*
-		 * if vddio and vddd > 3.1v,
-		 * charge pump should be clean before set ana_pwr
-		 */
-		snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
-				SGTL5000_VDDC_CHRGPMP_POWERUP, 0);
-
+		ana_pwr &= ~SGTL5000_VDDC_CHRGPMP_POWERUP;
 		/* VDDC use VDDIO rail */
 		lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
 		lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c
index bb9f070..fb1f0a7 100644
--- a/sound/soc/codecs/wm2000.c
+++ b/sound/soc/codecs/wm2000.c
@@ -581,7 +581,7 @@ static int wm2000_anc_mode_get(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
 
-	ucontrol->value.enumerated.item[0] = wm2000->anc_active;
+	ucontrol->value.integer.value[0] = wm2000->anc_active;
 
 	return 0;
 }
@@ -591,7 +591,7 @@ static int wm2000_anc_mode_put(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
-	int anc_active = ucontrol->value.enumerated.item[0];
+	int anc_active = ucontrol->value.integer.value[0];
 
 	if (anc_active > 1)
 		return -EINVAL;
@@ -607,7 +607,7 @@ static int wm2000_speaker_get(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
 
-	ucontrol->value.enumerated.item[0] = wm2000->spk_ena;
+	ucontrol->value.integer.value[0] = wm2000->spk_ena;
 
 	return 0;
 }
@@ -617,7 +617,7 @@ static int wm2000_speaker_put(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev);
-	int val = ucontrol->value.enumerated.item[0];
+	int val = ucontrol->value.integer.value[0];
 
 	if (val > 1)
 		return -EINVAL;
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 8b5afc1..3616b5b 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -120,7 +120,7 @@ static int wm8731_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = wm8731->deemph;
+	ucontrol->value.integer.value[0] = wm8731->deemph;
 
 	return 0;
 }
@@ -130,7 +130,7 @@ static int wm8731_put_deemph(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
-	int deemph = ucontrol->value.enumerated.item[0];
+	int deemph = ucontrol->value.integer.value[0];
 	int ret = 0;
 
 	if (deemph > 1)
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index 77758542..776653d 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -445,7 +445,7 @@ static int wm8903_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = wm8903->deemph;
+	ucontrol->value.integer.value[0] = wm8903->deemph;
 
 	return 0;
 }
@@ -455,7 +455,7 @@ static int wm8903_put_deemph(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
-	int deemph = ucontrol->value.enumerated.item[0];
+	int deemph = ucontrol->value.integer.value[0];
 	int ret = 0;
 
 	if (deemph > 1)
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index c93e360..19f3040 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -528,7 +528,7 @@ static int wm8904_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = wm8904->deemph;
+	ucontrol->value.integer.value[0] = wm8904->deemph;
 	return 0;
 }
 
@@ -537,7 +537,7 @@ static int wm8904_put_deemph(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
-	int deemph = ucontrol->value.enumerated.item[0];
+	int deemph = ucontrol->value.integer.value[0];
 
 	if (deemph > 1)
 		return -EINVAL;
diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c
index 61fe974..4696f66 100644
--- a/sound/soc/codecs/wm8955.c
+++ b/sound/soc/codecs/wm8955.c
@@ -393,7 +393,7 @@ static int wm8955_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = wm8955->deemph;
+	ucontrol->value.integer.value[0] = wm8955->deemph;
 	return 0;
 }
 
@@ -402,7 +402,7 @@ static int wm8955_put_deemph(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
-	int deemph = ucontrol->value.enumerated.item[0];
+	int deemph = ucontrol->value.integer.value[0];
 
 	if (deemph > 1)
 		return -EINVAL;
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index a09d7eb..a3e4831 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -132,7 +132,7 @@ static int wm8960_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
 
-	ucontrol->value.enumerated.item[0] = wm8960->deemph;
+	ucontrol->value.integer.value[0] = wm8960->deemph;
 	return 0;
 }
 
@@ -141,7 +141,7 @@ static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
-	int deemph = ucontrol->value.enumerated.item[0];
+	int deemph = ucontrol->value.integer.value[0];
 
 	if (deemph > 1)
 		return -EINVAL;
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 5a649da..96bce55a 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -333,7 +333,7 @@ static struct snd_pcm_ops omap_pcm_ops = {
 	.mmap		= omap_pcm_mmap,
 };
 
-static u64 omap_pcm_dmamask = DMA_BIT_MASK(64);
+static u64 omap_pcm_dmamask = DMA_BIT_MASK(32);
 
 static int omap_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
 	int stream)
@@ -384,7 +384,7 @@ static int omap_pcm_new(struct snd_soc_pcm_runtime *rtd)
 	if (!card->dev->dma_mask)
 		card->dev->dma_mask = &omap_pcm_dmamask;
 	if (!card->dev->coherent_dma_mask)
-		card->dev->coherent_dma_mask = DMA_BIT_MASK(64);
+		card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
 
 	if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
 		ret = omap_pcm_preallocate_dma_buffer(pcm,
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index fb95069..040d101 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -64,6 +64,7 @@ static const struct rc_config {
 	{ USB_ID(0x041e, 0x3040), 2, 2, 6, 6,  2,  0x6e91 }, /* Live! 24-bit */
 	{ USB_ID(0x041e, 0x3042), 0, 1, 1, 1,  1,  0x000d }, /* Usb X-Fi S51 */
 	{ USB_ID(0x041e, 0x30df), 0, 1, 1, 1,  1,  0x000d }, /* Usb X-Fi S51 Pro */
+	{ USB_ID(0x041e, 0x3237), 0, 1, 1, 1,  1,  0x000d }, /* Usb X-Fi S51 Pro */
 	{ USB_ID(0x041e, 0x3048), 2, 2, 6, 6,  2,  0x6e91 }, /* Toshiba SB0500 */
 };
 
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 5ef3579..2ad5d77 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -1871,6 +1871,36 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 		}
 	}
 },
+{
+	USB_DEVICE(0x0582, 0x0159),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		/* .vendor_name = "Roland", */
+		/* .product_name = "UA-22", */
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 1,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 2,
+				.type = QUIRK_MIDI_FIXED_ENDPOINT,
+				.data = & (const struct snd_usb_midi_endpoint_info) {
+					.out_cables = 0x0001,
+					.in_cables = 0x0001
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 
 /* Guillemot devices */
 {
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 2db7ba0..331647c 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -816,10 +816,10 @@ $(OUTPUT)util/rbtree.o: ../../lib/rbtree.c $(OUTPUT)PERF-CFLAGS
 	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
 
 $(OUTPUT)util/scripting-engines/trace-event-perl.o: util/scripting-engines/trace-event-perl.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
+	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow -Wno-undef -Wno-switch-default $<
 
 $(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o: scripts/perl/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs $<
+	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs -Wno-undef -Wno-switch-default $<
 
 $(OUTPUT)util/scripting-engines/trace-event-python.o: util/scripting-engines/trace-event-python.c $(OUTPUT)PERF-CFLAGS
 	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<

Re: [PATCH 3.4 035/172] ALSA: hdspm - Constrain periods to 2 on older cards

[Adrian Knoth]

On 06/16/15 10:34, lizf@kernel.org wrote:

> From: Adrian Knoth <adi@drcomp.erfurt.thur.de>
> 3.4.108-rc1 review patch.  If anyone has any objections, please let me
> know.

I do.

> commit f0153c3d948c1764f6c920a0675d86fc1d75813e upstream.
> 
> diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
> index bc030a2..0627ffe 100644
> --- a/sound/pci/rme9652/hdspm.c
> +++ b/sound/pci/rme9652/hdspm.c
> @@ -6042,6 +6042,12 @@ static int snd_hdspm_capture_open(struct snd_pcm_substream *substream)
>  		snd_pcm_hw_constraint_minmax(runtime,
>  					     SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
>  					     64, 8192);
> +		snd_pcm_hw_constraint_minmax(runtime,
> +					     SNDRV_PCM_HW_PARAM_PERIODS,
> +					     2, 2);
> +		snd_pcm_hw_constraint_minmax(runtime,
> +					     SNDRV_PCM_HW_PARAM_PERIODS,
> +					     2, 2);
>  		break;
>  	}

This is not correct, those lines need to go to two different functions
(snd_hdspm_playback_open and snd_hdspm_capture_open).

Here is how the patch should look like:


diff -u -r old/hdspm.c new/hdspm.c
--- old/hdspm.c	2015-06-16 11:41:37.070389307 +0200
+++ new/hdspm.c	2015-06-16 11:44:02.101257093 +0200
@@ -6114,6 +6114,9 @@
 		snd_pcm_hw_constraint_minmax(runtime,
 					     SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
 					     64, 8192);
+		snd_pcm_hw_constraint_minmax(runtime,
+				SNDRV_PCM_HW_PARAM_PERIODS,
+				2, 2);
 		break;
 	}

@@ -6188,6 +6191,9 @@
 		snd_pcm_hw_constraint_minmax(runtime,
 					     SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
 					     64, 8192);
+		snd_pcm_hw_constraint_minmax(runtime,
+				SNDRV_PCM_HW_PARAM_PERIODS,
+				2, 2);
 		break;
 	}

Re: [PATCH 3.4 051/172] netfilter: xt_socket: fix a stack corruption bug

[Pablo Neira Ayuso]

On Tue, Jun 16, 2015 at 04:35:05PM +0800, lizf@kernel.org wrote:
> From: Eric Dumazet <edumazet@google.com>
> 
> 3.4.108-rc1 review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> 
> commit 78296c97ca1fd3b104f12e1f1fbc06c46635990b upstream.
> 
> As soon as extract_icmp6_fields() returns, its local storage (automatic
> variables) is deallocated and can be overwritten.
> 
> Lets add an additional parameter to make sure storage is valid long
> enough.
> 
> While we are at it, adds some const qualifiers.
> 
> Signed-off-by: Eric Dumazet <edumazet@google.com>
> Fixes: b64c9256a9b76 ("tproxy: added IPv6 support to the socket match")
> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
> [lizf: Backported to 3.4: adjust context]
> Signed-off-by: Zefan Li <lizefan@huawei.com>

Thanks for backporting this for 3.4.

Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>

Re: [PATCH 3.4 000/172] 3.4.108-rc1 review

[Ian Campbell]

On Tue, 2015-06-16 at 16:33 +0800, lizf@kernel.org wrote:
> From: Zefan Li <lizefan@huawei.com>
> 
> This is the start of the stable review cycle for the 3.4.108 release.
> There are 172 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Jun 18 08:30:58 UTC 2015.
> Anything received after that time might be too late.

Would it be possible to also include 31a418986a58 "xen: netback: read
hotplug script once at start of day." which has started trickling into
other stable branches already, please.

If not now then for 109.

Thanks,
Ian.

Re: [PATCH 3.4 000/172] 3.4.108-rc1 review

[Ian Campbell]

On Tue, 2015-06-16 at 16:33 +0800, lizf@kernel.org wrote:
> From: Zefan Li <lizefan@huawei.com>
> 
> This is the start of the stable review cycle for the 3.4.108 release.
> There are 172 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Jun 18 08:30:58 UTC 2015.
> Anything received after that time might be too late.

Would it be possible to also include 31a418986a58 "xen: netback: read
hotplug script once at start of day." which has started trickling into
other stable branches already, please.

If not now then for 109.

Thanks,
Ian.

Re: [PATCH 3.4 000/172] 3.4.108-rc1 review

[Zefan Li]

On 2015/6/16 16:49, Guenter Roeck wrote:
> On 06/16/2015 01:33 AM, lizf@kernel.org wrote:
>> From: Zefan Li <lizefan@huawei.com>
>>
>> This is the start of the stable review cycle for the 3.4.108 release.
>> There are 172 patches in this series, all will be posted as a response
>> to this one.  If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Thu Jun 18 08:30:58 UTC 2015.
>> Anything received after that time might be too late.
>>
> 
> Build results:
>     total: 98 pass: 94 fail: 4
> Failed builds:
>     arm:allmodconfig
>     score:defconfig
>     sparc64:allmodconfig
>     xtensa:allmodconfig
> Qemu test results:
>     total: 23 pass: 22 fail: 1
> Failed tests:
>     arm:arm_versatile_defconfig
> 
> Results are as expected.
> Details are available at http://server.roeck-us.net:8010/builders.
> 

Thanks for testing!

Re: [PATCH 3.4 035/172] ALSA: hdspm - Constrain periods to 2 on older cards

[Zefan Li]

>> @@ -6042,6 +6042,12 @@ static int snd_hdspm_capture_open(struct snd_pcm_substream *substream)
>>  		snd_pcm_hw_constraint_minmax(runtime,
>>  					     SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
>>  					     64, 8192);
>> +		snd_pcm_hw_constraint_minmax(runtime,
>> +					     SNDRV_PCM_HW_PARAM_PERIODS,
>> +					     2, 2);
>> +		snd_pcm_hw_constraint_minmax(runtime,
>> +					     SNDRV_PCM_HW_PARAM_PERIODS,
>> +					     2, 2);
>>  		break;
>>  	}
> 
> This is not correct, those lines need to go to two different functions
> (snd_hdspm_playback_open and snd_hdspm_capture_open).
> 
> Here is how the patch should look like:
> 

Now fixed. Thanks for review the patch.

Re: [PATCH 3.4 000/172] 3.4.108-rc1 review

[Zefan Li]

On 2015/6/16 23:13, Ian Campbell wrote:
> On Tue, 2015-06-16 at 16:33 +0800, lizf@kernel.org wrote:
>> From: Zefan Li <lizefan@huawei.com>
>>
>> This is the start of the stable review cycle for the 3.4.108 release.
>> There are 172 patches in this series, all will be posted as a response
>> to this one.  If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Thu Jun 18 08:30:58 UTC 2015.
>> Anything received after that time might be too late.
> 
> Would it be possible to also include 31a418986a58 "xen: netback: read
> hotplug script once at start of day." which has started trickling into
> other stable branches already, please.
> 
> If not now then for 109.
> 

Queued up for 3.4.108. :)

Re: [PATCH 3.4 000/172] 3.4.108-rc1 review

[Zefan Li]

On 2015/6/16 23:13, Ian Campbell wrote:
> On Tue, 2015-06-16 at 16:33 +0800, lizf@kernel.org wrote:
>> From: Zefan Li <lizefan@huawei.com>
>>
>> This is the start of the stable review cycle for the 3.4.108 release.
>> There are 172 patches in this series, all will be posted as a response
>> to this one.  If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Thu Jun 18 08:30:58 UTC 2015.
>> Anything received after that time might be too late.
> 
> Would it be possible to also include 31a418986a58 "xen: netback: read
> hotplug script once at start of day." which has started trickling into
> other stable branches already, please.
> 
> If not now then for 109.
> 

Queued up for 3.4.108. :)

Re: [PATCH 3.4 000/172] 3.4.108-rc1 review

[Ian Campbell]

On Thu, 2015-06-18 at 11:19 +0800, Zefan Li wrote:
> On 2015/6/16 23:13, Ian Campbell wrote:
> > On Tue, 2015-06-16 at 16:33 +0800, lizf@kernel.org wrote:
> >> From: Zefan Li <lizefan@huawei.com>
> >>
> >> This is the start of the stable review cycle for the 3.4.108 release.
> >> There are 172 patches in this series, all will be posted as a response
> >> to this one.  If anyone has any issues with these being applied, please
> >> let me know.
> >>
> >> Responses should be made by Thu Jun 18 08:30:58 UTC 2015.
> >> Anything received after that time might be too late.
> > 
> > Would it be possible to also include 31a418986a58 "xen: netback: read
> > hotplug script once at start of day." which has started trickling into
> > other stable branches already, please.
> > 
> > If not now then for 109.
> > 
> 
> Queued up for 3.4.108. :)

Smashing, thank you.

Ian.

Re: [PATCH 3.4 000/172] 3.4.108-rc1 review

[Ian Campbell]

On Thu, 2015-06-18 at 11:19 +0800, Zefan Li wrote:
> On 2015/6/16 23:13, Ian Campbell wrote:
> > On Tue, 2015-06-16 at 16:33 +0800, lizf@kernel.org wrote:
> >> From: Zefan Li <lizefan@huawei.com>
> >>
> >> This is the start of the stable review cycle for the 3.4.108 release.
> >> There are 172 patches in this series, all will be posted as a response
> >> to this one.  If anyone has any issues with these being applied, please
> >> let me know.
> >>
> >> Responses should be made by Thu Jun 18 08:30:58 UTC 2015.
> >> Anything received after that time might be too late.
> > 
> > Would it be possible to also include 31a418986a58 "xen: netback: read
> > hotplug script once at start of day." which has started trickling into
> > other stable branches already, please.
> > 
> > If not now then for 109.
> > 
> 
> Queued up for 3.4.108. :)

Smashing, thank you.

Ian.