From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Guinot Subject: [RESEND PATCH 4/4] leds: leds-ns2: depends on MACH_ARMADA_370 Date: Thu, 18 Jun 2015 17:17:30 +0200 Message-ID: <1434640650-28086-5-git-send-email-simon.guinot@sequanux.org> References: <1434640650-28086-1-git-send-email-simon.guinot@sequanux.org> Return-path: Received: from vm1.sequanux.org ([188.165.36.56]:38172 "EHLO vm1.sequanux.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754802AbbFRPRl (ORCPT ); Thu, 18 Jun 2015 11:17:41 -0400 In-Reply-To: <1434640650-28086-1-git-send-email-simon.guinot@sequanux.org> Sender: linux-leds-owner@vger.kernel.org List-Id: linux-leds@vger.kernel.org To: Bryan Wu , Richard Purdie , Jason Cooper , Andrew Lunn , Gregory Clement , Sebastian Hesselbarth Cc: linux-leds@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Vincent Donnefort The leds-ns2 driver is also used by the n090401 board (Seagate NAS 4-Bay), which is based on the Marvell Armada-370 SoC. Then this patch allows to select the leds-ns2 driver if MACH_ARMADA_370 is enabled. Additionally, this also updates the Kconfig help message. Signed-off-by: Simon Guinot --- drivers/leds/Kconfig | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 966b9605f5f0..68fd6b2b12be 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -431,12 +431,16 @@ config LEDS_MC13783 config LEDS_NS2 tristate "LED support for Network Space v2 GPIO LEDs" depends on LEDS_CLASS - depends on MACH_KIRKWOOD + depends on MACH_KIRKWOOD || MACH_ARMADA_370 default y help - This option enable support for the dual-GPIO LED found on the - Network Space v2 board (and parents). This include Internet Space v2, - Network Space (Max) v2 and d2 Network v2 boards. + This option enables support for the dual-GPIO LEDs found on the + following LaCie/Seagate boards: + + Network Space v2 (and parents: Max, Mini) + Internet Space v2 + d2 Network v2 + n090401 (Seagate NAS 4-Bay) config LEDS_NETXBIG tristate "LED support for Big Network series LEDs" -- 2.1.4 From mboxrd@z Thu Jan 1 00:00:00 1970 From: simon.guinot@sequanux.org (Simon Guinot) Date: Thu, 18 Jun 2015 17:17:30 +0200 Subject: [RESEND PATCH 4/4] leds: leds-ns2: depends on MACH_ARMADA_370 In-Reply-To: <1434640650-28086-1-git-send-email-simon.guinot@sequanux.org> References: <1434640650-28086-1-git-send-email-simon.guinot@sequanux.org> Message-ID: <1434640650-28086-5-git-send-email-simon.guinot@sequanux.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The leds-ns2 driver is also used by the n090401 board (Seagate NAS 4-Bay), which is based on the Marvell Armada-370 SoC. Then this patch allows to select the leds-ns2 driver if MACH_ARMADA_370 is enabled. Additionally, this also updates the Kconfig help message. Signed-off-by: Simon Guinot --- drivers/leds/Kconfig | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 966b9605f5f0..68fd6b2b12be 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -431,12 +431,16 @@ config LEDS_MC13783 config LEDS_NS2 tristate "LED support for Network Space v2 GPIO LEDs" depends on LEDS_CLASS - depends on MACH_KIRKWOOD + depends on MACH_KIRKWOOD || MACH_ARMADA_370 default y help - This option enable support for the dual-GPIO LED found on the - Network Space v2 board (and parents). This include Internet Space v2, - Network Space (Max) v2 and d2 Network v2 boards. + This option enables support for the dual-GPIO LEDs found on the + following LaCie/Seagate boards: + + Network Space v2 (and parents: Max, Mini) + Internet Space v2 + d2 Network v2 + n090401 (Seagate NAS 4-Bay) config LEDS_NETXBIG tristate "LED support for Big Network series LEDs" -- 2.1.4