From mboxrd@z Thu Jan 1 00:00:00 1970 From: rogershimizu@gmail.com (Roger Shimizu) Date: Tue, 23 Jun 2015 00:02:30 +0900 Subject: [PATCH v2 2/2] ARM: dts: add buffalo linkstation ls-wvl/vl In-Reply-To: <1434713319-8691-3-git-send-email-rogershimizu@gmail.com> References: <1434713319-8691-3-git-send-email-rogershimizu@gmail.com> Message-ID: <1434985351-6678-1-git-send-email-rogershimizu@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add dts file to support Buffalo Linkstation LS-WVL and LS-VL, which are 3.5" HDD NAS in 2-bay and 1-bay respectively. Signed-off-by: Roger Shimizu Reviewed-by: Nobuhiro Iwamatsu --- .../devicetree/bindings/arm/marvell,kirkwood.txt | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/kirkwood-lswvl.dts | 301 +++++++++++++++++++++ 3 files changed, 303 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-lswvl.dts diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt index b79212f..5171ad8 100644 --- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt +++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt @@ -20,6 +20,7 @@ And in addition, the compatible shall be extended with the specific board. Currently known boards are: "buffalo,lschlv2" +"buffalo,lswvl" "buffalo,lswxl" "buffalo,lsxhl" "buffalo,lsxl" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b45c974..5b36795 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -176,6 +176,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-km_kirkwood.dtb \ kirkwood-laplug.dtb \ kirkwood-lschlv2.dtb \ + kirkwood-lswvl.dtb \ kirkwood-lswxl.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts new file mode 100644 index 0000000..ad35329 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lswvl.dts @@ -0,0 +1,301 @@ +/* + * Device Tree file for Buffalo Linkstation LS-WVL/VL + * + * Copyright (C) 2015, rogershimizu at gmail.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" + +/ { + model = "Buffalo Linkstation LS-WVL/VL"; + compatible = "buffalo,lswvl", "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + pcie at 1,0 { + status = "okay"; + }; + }; + }; + + ocp at f1000000 { + pinctrl: pin-controller at 10000 { + pmx_power_hdd0: pmx-power-hdd0 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + pmx_led_hdderr0: pmx-led-hdderr0 { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_hdderr1: pmx-led-hdderr1 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function_red { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + + serial at 12000 { + status = "okay"; + }; + + sata at 80000 { + status = "okay"; + nr-ports = <2>; + }; + + spi at 10600 { + status = "okay"; + + m25p40 at 0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p40", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + mode = <0>; + + partition at 0 { + reg = <0x0 0x60000>; + label = "uboot"; + read-only; + }; + + partition at 60000 { + reg = <0x60000 0x10000>; + label = "dtb"; + read-only; + }; + + partition at 70000 { + reg = <0x70000 0x10000>; + label = "uboot_env"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_button_function &pmx_power_switch + &pmx_power_auto_switch>; + pinctrl-names = "default"; + + button at 1 { + label = "Function Button"; + linux,code = ; + gpios = <&gpio0 45 GPIO_ACTIVE_LOW>; + }; + + button at 2 { + label = "Power-on Switch"; + linux,code = ; + linux,input-type = <5>; + gpios = <&gpio0 46 GPIO_ACTIVE_LOW>; + }; + + button at 3 { + label = "Power-auto Switch"; + linux,code = ; + linux,input-type = <5>; + gpios = <&gpio0 47 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue + &pmx_led_hdderr0 + &pmx_led_hdderr1>; + pinctrl-names = "default"; + + led at 1 { + label = "lswvl:red:alarm"; + gpios = <&gpio0 36 GPIO_ACTIVE_LOW>; + }; + + led at 2 { + label = "lswvl:red:func"; + gpios = <&gpio0 37 GPIO_ACTIVE_LOW>; + }; + + led at 3 { + label = "lswvl:amber:info"; + gpios = <&gpio0 38 GPIO_ACTIVE_LOW>; + }; + + led at 4 { + label = "lswvl:blue:func"; + gpios = <&gpio0 39 GPIO_ACTIVE_LOW>; + }; + + led at 5 { + label = "lswvl:blue:power"; + gpios = <&gpio0 40 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + led at 6 { + label = "lswvl:red:hdderr0"; + gpios = <&gpio0 34 GPIO_ACTIVE_LOW>; + }; + + led at 7 { + label = "lswvl:red:hdderr1"; + gpios = <&gpio0 35 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + gpios = <&gpio0 17 GPIO_ACTIVE_LOW + &gpio0 16 GPIO_ACTIVE_LOW>; + + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + + alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>; + }; + + restart_poweroff { + compatible = "restart-poweroff"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; + pinctrl-names = "default"; + + usb_power: regulator at 1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + hdd_power0: regulator at 2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + hdd_power1: regulator at 3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "HDD1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy at 0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + + ethernet0-port at 0 { + phy-handle = <ðphy0>; + }; +}; -- 1.9.1