All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthieu Moy <Matthieu.Moy@imag.fr>
To: gitster@pobox.com
Cc: git@vger.kernel.org, antoine.delaite@ensimag.grenoble-inp.fr,
	louis--alexandre.stuber@ensimag.grenoble-inp.fr,
	chriscool@tuxfamily.org, thomasxnguy@gmail.com,
	valentinduperray@gmail.com,
	Louis Stuber <stuberl@ensimag.grenoble-inp.fr>,
	Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>,
	Franck Jonas <Franck.Jonas@ensimag.imag.fr>,
	Lucien Kong <Lucien.Kong@ensimag.imag.fr>,
	Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>,
	Huynh Khoi Nguyen Nguyen 
	<Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>,
	Matthieu Moy <Matthieu.Moy@imag.fr>
Subject: [PATCH v9 3/5] bisect: simplify the addition of new bisect terms
Date: Thu, 25 Jun 2015 20:50:55 +0200	[thread overview]
Message-ID: <1435258257-29047-4-git-send-email-Matthieu.Moy@imag.fr> (raw)
In-Reply-To: <1435258257-29047-1-git-send-email-Matthieu.Moy@imag.fr>

From: Antoine Delaite <antoine.delaite@ensimag.grenoble-inp.fr>

We create a file BISECT_TERMS in the repository .git to be read during a
bisection. The fonctions to be changed if we add new terms are quite
few.
In git-bisect.sh :
	check_and_set_terms
	bisect_voc

Co-authored-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Tweaked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Antoine Delaite <antoine.delaite@ensimag.grenoble-inp.fr>
Signed-off-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
---
 bisect.c      | 33 ++++++++++++++++++++++++++--
 git-bisect.sh | 70 +++++++++++++++++++++++++++++++++++++++++++++++++++++------
 revision.c    | 20 +++++++++++++++--
 3 files changed, 112 insertions(+), 11 deletions(-)

diff --git a/bisect.c b/bisect.c
index 9368f6c..c5f96eb 100644
--- a/bisect.c
+++ b/bisect.c
@@ -905,6 +905,36 @@ static void show_diff_tree(const char *prefix, struct commit *commit)
 }
 
 /*
+ * The terms used for this bisect session are stored in BISECT_TERMS.
+ * We read them and store them to adapt the messages accordingly.
+ * Default is bad/good.
+ */
+void read_bisect_terms(const char **read_bad, const char **read_good)
+{
+	struct strbuf str = STRBUF_INIT;
+	const char *filename = git_path("BISECT_TERMS");
+	FILE *fp = fopen(filename, "r");
+
+	if (!fp) {
+		if (errno == ENOENT) {
+			*read_bad = "bad";
+			*read_good = "good";
+			return;
+		} else {
+			die("could not read file '%s': %s", filename,
+				strerror(errno));
+		}
+	} else {
+		strbuf_getline(&str, fp, '\n');
+		*read_bad = strbuf_detach(&str, NULL);
+		strbuf_getline(&str, fp, '\n');
+		*read_good = strbuf_detach(&str, NULL);
+	}
+	strbuf_release(&str);
+	fclose(fp);
+}
+
+/*
  * We use the convention that exiting with an exit code 10 means that
  * the bisection process finished successfully.
  * In this case the calling shell script should exit 0.
@@ -920,8 +950,7 @@ int bisect_next_all(const char *prefix, int no_checkout)
 	const unsigned char *bisect_rev;
 	char bisect_rev_hex[GIT_SHA1_HEXSZ + 1];
 
-	name_bad = "bad";
-	name_good = "good";
+	read_bisect_terms(&name_bad, &name_good);
 	if (read_bisect_refs())
 		die("reading bisect refs failed");
 
diff --git a/git-bisect.sh b/git-bisect.sh
index ce6412f..7bb18db 100755
--- a/git-bisect.sh
+++ b/git-bisect.sh
@@ -77,6 +77,9 @@ bisect_start() {
 	orig_args=$(git rev-parse --sq-quote "$@")
 	bad_seen=0
 	eval=''
+	# revision_seen is true if a git bisect start
+	# has revision as arguments
+	revision_seen=0
 	if test "z$(git rev-parse --is-bare-repository)" != zfalse
 	then
 		mode=--no-checkout
@@ -101,6 +104,9 @@ bisect_start() {
 				die "$(eval_gettext "'\$arg' does not appear to be a valid revision")"
 				break
 			}
+
+			revision_seen=1
+
 			case $bad_seen in
 			0) state=$NAME_BAD ; bad_seen=1 ;;
 			*) state=$NAME_GOOD ;;
@@ -172,6 +178,11 @@ bisect_start() {
 	} &&
 	git rev-parse --sq-quote "$@" >"$GIT_DIR/BISECT_NAMES" &&
 	eval "$eval true" &&
+	if test $revision_seen -eq 1 && test ! -s "$GIT_DIR/BISECT_TERMS"
+	then
+		echo "$NAME_BAD" >"$GIT_DIR/BISECT_TERMS" &&
+		echo "$NAME_GOOD" >>"$GIT_DIR/BISECT_TERMS"
+	fi &&
 	echo "git bisect start$orig_args" >>"$GIT_DIR/BISECT_LOG" || exit
 	#
 	# Check if we can proceed to the next bisect state.
@@ -232,6 +243,7 @@ bisect_skip() {
 bisect_state() {
 	bisect_autostart
 	state=$1
+	check_and_set_terms $state
 	case "$#,$state" in
 	0,*)
 		die "$(gettext "Please call 'bisect_state' with at least one argument.")" ;;
@@ -291,15 +303,17 @@ bisect_next_check() {
 		: bisect without $NAME_GOOD...
 		;;
 	*)
-
+		bad_syn=$(bisect_voc bad)
+		good_syn=$(bisect_voc good)
 		if test -s "$GIT_DIR/BISECT_START"
 		then
-			gettextln "You need to give me at least one good and one bad revision.
-(You can use \"git bisect bad\" and \"git bisect good\" for that.)" >&2
+
+			eval_gettextln "You need to give me at least one \$bad_syn and one \$good_syn revision.
+(You can use \"git bisect \$bad_syn\" and \"git bisect \$good_syn\" for that.)" >&2
 		else
-			gettextln "You need to start by \"git bisect start\".
-You then need to give me at least one good and one bad revision.
-(You can use \"git bisect bad\" and \"git bisect good\" for that.)" >&2
+			eval_gettextln "You need to start by \"git bisect start\".
+You then need to give me at least one \$good_syn and one \$bad_syn revision.
+(You can use \"git bisect \$bad_syn\" and \"git bisect \$good_syn\" for that.)" >&2
 		fi
 		exit 1 ;;
 	esac
@@ -402,6 +416,7 @@ bisect_clean_state() {
 	rm -f "$GIT_DIR/BISECT_LOG" &&
 	rm -f "$GIT_DIR/BISECT_NAMES" &&
 	rm -f "$GIT_DIR/BISECT_RUN" &&
+	rm -f "$GIT_DIR/BISECT_TERMS" &&
 	# Cleanup head-name if it got left by an old version of git-bisect
 	rm -f "$GIT_DIR/head-name" &&
 	git update-ref -d --no-deref BISECT_HEAD &&
@@ -422,11 +437,13 @@ bisect_replay () {
 			rev="$command"
 			command="$bisect"
 		fi
+		get_terms
+		check_and_set_terms "$command"
 		case "$command" in
 		start)
 			cmd="bisect_start $rev"
 			eval "$cmd" ;;
-		$NAME_GOOD|$NAME_BAD|skip)
+		"$NAME_GOOD"|"$NAME_BAD"|skip)
 			bisect_write "$command" "$rev" ;;
 		*)
 			die "$(gettext "?? what are you talking about?")" ;;
@@ -499,11 +516,50 @@ bisect_log () {
 	cat "$GIT_DIR/BISECT_LOG"
 }
 
+get_terms () {
+	if test -s "$GIT_DIR/BISECT_TERMS"
+	then
+		{
+		read NAME_BAD
+		read NAME_GOOD
+		} <"$GIT_DIR/BISECT_TERMS"
+	fi
+}
+
+check_and_set_terms () {
+	cmd="$1"
+	case "$cmd" in
+	bad|good)
+		if test -s "$GIT_DIR/BISECT_TERMS" && test "$cmd" != "$NAME_BAD" && test "$cmd" != "$NAME_GOOD"
+		then
+			die "$(eval_gettext "Invalid command: you're currently in a \$NAME_BAD/\$NAME_GOOD bisect.")"
+		fi
+		case "$cmd" in
+		bad|good)
+			if ! test -s "$GIT_DIR/BISECT_TERMS"
+			then
+				echo "bad" >"$GIT_DIR/BISECT_TERMS" &&
+				echo "good" >>"$GIT_DIR/BISECT_TERMS"
+			fi
+			NAME_BAD="bad"
+			NAME_GOOD="good" ;;
+		esac ;;
+	esac
+}
+
+bisect_voc () {
+	case "$1" in
+	bad) echo "bad" ;;
+	good) echo "good" ;;
+	esac
+}
+
 case "$#" in
 0)
 	usage ;;
 *)
 	cmd="$1"
+	get_terms
 	shift
 	case "$cmd" in
 	help)
diff --git a/revision.c b/revision.c
index 3ff8723..24ce842 100644
--- a/revision.c
+++ b/revision.c
@@ -21,6 +21,9 @@
 
 volatile show_early_output_fn_t show_early_output;
 
+static const char *name_bad;
+static const char *name_good;
+
 char *path_name(const struct name_path *path, const char *name)
 {
 	const struct name_path *p;
@@ -2076,14 +2079,26 @@ void parse_revision_opt(struct rev_info *revs, struct parse_opt_ctx_t *ctx,
 	ctx->argc -= n;
 }
 
+extern void read_bisect_terms(const char **bad, const char **good);
+
 static int for_each_bad_bisect_ref(const char *submodule, each_ref_fn fn, void *cb_data)
 {
-	return for_each_ref_in_submodule(submodule, "refs/bisect/bad", fn, cb_data);
+	struct strbuf bisect_refs = STRBUF_INIT;
+	int status;
+	strbuf_addf(&bisect_refs, "refs/bisect/%s", name_bad);
+	status = for_each_ref_in_submodule(submodule, bisect_refs.buf, fn, cb_data);
+	strbuf_release(&bisect_refs);
+	return status;
 }
 
 static int for_each_good_bisect_ref(const char *submodule, each_ref_fn fn, void *cb_data)
 {
-	return for_each_ref_in_submodule(submodule, "refs/bisect/good", fn, cb_data);
+	struct strbuf bisect_refs = STRBUF_INIT;
+	int status;
+	strbuf_addf(&bisect_refs, "refs/bisect/%s", name_good);
+	status = for_each_ref_in_submodule(submodule, bisect_refs.buf, fn, cb_data);
+	strbuf_release(&bisect_refs);
+	return status;
 }
 
 static int handle_revision_pseudo_opt(const char *submodule,
@@ -2112,6 +2127,7 @@ static int handle_revision_pseudo_opt(const char *submodule,
 		handle_refs(submodule, revs, *flags, for_each_branch_ref_submodule);
 		clear_ref_exclusion(&revs->ref_excludes);
 	} else if (!strcmp(arg, "--bisect")) {
+		read_bisect_terms(&name_bad, &name_good);
 		handle_refs(submodule, revs, *flags, for_each_bad_bisect_ref);
 		handle_refs(submodule, revs, *flags ^ (UNINTERESTING | BOTTOM), for_each_good_bisect_ref);
 		revs->bisect = 1;
-- 
2.4.4.414.g318df7a.dirty

  parent reply	other threads:[~2015-06-25 18:51 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-22 21:00 [PATCH v3 1/6] bisect: correction of typo Antoine Delaite
2015-06-22 21:00 ` [PATCH v3 2/6] bisect: replace hardcoded "bad|good" by variables Antoine Delaite
2015-06-22 21:00 ` [PATCH v3 3/6] bisect: simplify the addition of new bisect terms Antoine Delaite
2015-06-22 21:00 ` [PATCH v3 4/6] bisect: add the terms old/new Antoine Delaite
2015-06-22 21:00 ` [PATCH v3 5/6] revision: fix rev-list --bisect in old/new mode Antoine Delaite
2015-06-22 21:00 ` [PATCH v3 6/6] bisect: allows any terms set by user Antoine Delaite
2015-06-23 12:54 ` [PATCH v7 0/5] git bisect old/new Matthieu Moy
2015-06-23 12:54   ` [PATCH v7 1/5] bisect: correction of typo Matthieu Moy
2015-06-23 12:54   ` [PATCH v7 2/5] bisect: replace hardcoded "bad|good" by variables Matthieu Moy
2015-06-23 12:54   ` [PATCH v7 3/5] bisect: simplify the addition of new bisect terms Matthieu Moy
2015-06-23 17:49     ` Eric Sunshine
2015-06-23 18:18       ` Matthieu Moy
2015-06-23 12:54   ` [PATCH v7 4/5] bisect: add the terms old/new Matthieu Moy
2015-06-23 19:27     ` Remi Galan Alfonso
2015-06-23 20:26       ` Matthieu Moy
2015-06-23 12:54   ` [PATCH v7 5/5] bisect: allows any terms set by user Matthieu Moy
2015-06-23 18:48     ` Junio C Hamano
2015-06-23 19:04   ` [PATCH v7 0/5] git bisect old/new Junio C Hamano
2015-06-23 20:16     ` Matthieu Moy
2015-06-23 20:34       ` Junio C Hamano
2015-06-24 15:17   ` [PATCH v8 0/5] Bisect terms Matthieu Moy
2015-06-24 15:17     ` [PATCH v8 1/5] bisect: correction of typo Matthieu Moy
2015-06-24 15:17     ` [PATCH v8 2/5] bisect: replace hardcoded "bad|good" by variables Matthieu Moy
2015-06-24 15:17     ` [PATCH v8 3/5] bisect: simplify the addition of new bisect terms Matthieu Moy
2015-06-24 17:29       ` Junio C Hamano
2015-06-24 21:26         ` Matthieu Moy
2015-06-24 15:17     ` [PATCH v8 4/5] bisect: add the terms old/new Matthieu Moy
2015-06-24 15:17     ` [PATCH v8 5/5] bisect: allow any terms set by user Matthieu Moy
2015-06-24 17:46       ` Junio C Hamano
2015-06-24 21:23         ` Matthieu Moy
2015-06-24 17:27     ` [PATCH v8 0/5] Bisect terms Junio C Hamano
2015-06-24 19:41     ` Junio C Hamano
2015-06-25 18:50   ` [PATCH v9 0/5] bisect terms Matthieu Moy
2015-06-25 18:50     ` [PATCH v9 1/5] bisect: correction of typo Matthieu Moy
2015-06-25 18:50     ` [PATCH v9 2/5] bisect: replace hardcoded "bad|good" by variables Matthieu Moy
2015-06-25 18:50     ` Matthieu Moy [this message]
2015-06-25 18:50     ` [PATCH v9 4/5] bisect: add the terms old/new Matthieu Moy
2015-06-26  4:11       ` Christian Couder
2015-06-26  7:00         ` Matthieu Moy
2015-06-25 18:50     ` [PATCH v9 5/5] bisect: allow any terms set by user Matthieu Moy
2015-06-25 21:41       ` Junio C Hamano
2015-06-25 22:10         ` Junio C Hamano
2015-06-26  8:20           ` Matthieu Moy
2015-06-26 16:48             ` Junio C Hamano
2015-06-26 17:08               ` Matthieu Moy
2015-06-26 18:08                 ` Junio C Hamano
2015-06-26 20:18                   ` Matthieu Moy
2015-06-26  6:59         ` Matthieu Moy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1435258257-29047-4-git-send-email-Matthieu.Moy@imag.fr \
    --to=matthieu.moy@imag.fr \
    --cc=Franck.Jonas@ensimag.imag.fr \
    --cc=Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr \
    --cc=Lucien.Kong@ensimag.imag.fr \
    --cc=Thomas.Nguy@ensimag.imag.fr \
    --cc=Valentin.Duperray@ensimag.imag.fr \
    --cc=antoine.delaite@ensimag.grenoble-inp.fr \
    --cc=chriscool@tuxfamily.org \
    --cc=git@vger.kernel.org \
    --cc=gitster@pobox.com \
    --cc=louis--alexandre.stuber@ensimag.grenoble-inp.fr \
    --cc=stuberl@ensimag.grenoble-inp.fr \
    --cc=thomasxnguy@gmail.com \
    --cc=valentinduperray@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.