From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Glass Date: Thu, 2 Jul 2015 18:16:10 -0600 Subject: [U-Boot] [PATCH 33/55] dm: video: Add support for the NXP PTN3460 bridge In-Reply-To: <1435882592-487-1-git-send-email-sjg@chromium.org> References: <1435882592-487-1-git-send-email-sjg@chromium.org> Message-ID: <1435882592-487-34-git-send-email-sjg@chromium.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This chip provides an eDP to LVDS bridge which is useful for SoCs that don't support LVDS displays (or it would waste scarce pins). There is no setup required by this chip, other than to adjust power-down and reset pins, and those are managed by the uclass. Signed-off-by: Simon Glass --- drivers/video/bridge/Kconfig | 9 +++++++++ drivers/video/bridge/Makefile | 1 + drivers/video/bridge/ptn3460.c | 38 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 48 insertions(+) create mode 100644 drivers/video/bridge/ptn3460.c diff --git a/drivers/video/bridge/Kconfig b/drivers/video/bridge/Kconfig index 589795d..2a3b6c4 100644 --- a/drivers/video/bridge/Kconfig +++ b/drivers/video/bridge/Kconfig @@ -16,3 +16,12 @@ config VIDEO_BRIDGE_PARADE_PS862X to be connected to an eDP output device such as an SoC that lacks LVDS capability, or where LVDS requires too many signals to route on the PCB. Setup parameters are provided in the device tree. + +config VIDEO_BRIDGE_NXP_PTN3460 + bool "Support NXP PTN3460 DP->LVDS bridge" + depends on VIDEO_BRIDGE + help + The NXP PTN3460 is a DisplayPort-to-LVDS (Low voltage differential + signalling) converter. It enables an LVDS LCD panel to be connected + to an eDP output device such as an SoC that lacks LVDS capability, + or where LVDS requires too many signals to route on the PCB. diff --git a/drivers/video/bridge/Makefile b/drivers/video/bridge/Makefile index c7cc563..ce731fa 100644 --- a/drivers/video/bridge/Makefile +++ b/drivers/video/bridge/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_VIDEO_BRIDGE) += video-bridge-uclass.o obj-$(CONFIG_VIDEO_BRIDGE_PARADE_PS862X) += ps862x.o +obj-$(CONFIG_VIDEO_BRIDGE_NXP_PTN3460) += ptn3460.o diff --git a/drivers/video/bridge/ptn3460.c b/drivers/video/bridge/ptn3460.c new file mode 100644 index 0000000..2e2ae7c --- /dev/null +++ b/drivers/video/bridge/ptn3460.c @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2015 Google, Inc + * Written by Simon Glass + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +static int ptn3460_attach(struct udevice *dev) +{ + int ret; + + debug("%s: %s\n", __func__, dev->name); + ret = video_bridge_set_active(dev, true); + if (ret) + return ret; + + return 0; +} + +struct video_bridge_ops ptn3460_ops = { + .attach = ptn3460_attach, +}; + +static const struct udevice_id ptn3460_ids[] = { + { .compatible = "nxp,ptn3460", }, + { } +}; + +U_BOOT_DRIVER(parade_ptn3460) = { + .name = "nmp_ptn3460", + .id = UCLASS_VIDEO_BRIDGE, + .of_match = ptn3460_ids, + .ops = &ptn3460_ops, +}; -- 2.4.3.573.g4eafbef