All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Cooper <andrew.cooper3@citrix.com>
To: Xen-devel <xen-devel@lists.xen.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>,
	Ian Jackson <Ian.Jackson@eu.citrix.com>,
	Ian Campbell <Ian.Campbell@citrix.com>,
	Wei Liu <wei.liu2@citrix.com>
Subject: [PATCH v2 19/27] tools/libxc+libxl+xl: Restore v2 streams
Date: Thu, 9 Jul 2015 19:26:45 +0100	[thread overview]
Message-ID: <1436466413-25867-20-git-send-email-andrew.cooper3@citrix.com> (raw)
In-Reply-To: <1436466413-25867-1-git-send-email-andrew.cooper3@citrix.com>

This is a complicated set of changes which must be done together for
bisectability.

 * libxl-save-helper is updated to unconditionally use libxc migration v2.
 * libxl compatibility workarounds in libxc are disabled for restore operations.
 * libxl__stream_read_start() is logically spliced into the event location
   where libxl__xc_domain_restore() used to reside.

The parameters 'hvm', 'pae', and 'superpages' were previously superfluous, and
are completely unused in migration v2. callbacks->toolstack_restore is handled
via a migration v2 record now, rather than via a callback from libxc.

NB: this change breaks Remus.  Further untangling needs to happen before Remus
will function.

Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>

---
Since v1:
 * Drop "legacy_width" from the IDL
 * Gain a LIBXL_HAVE_ to signify support of migration v2 streams
---
 tools/libxc/Makefile            |    4 ++--
 tools/libxl/libxl.h             |   17 ++++++++++++++
 tools/libxl/libxl_create.c      |   48 ++++++++++++---------------------------
 tools/libxl/libxl_save_helper.c |    2 +-
 tools/libxl/libxl_stream_read.c |   34 +++++++++++++++++++++++++++
 tools/libxl/libxl_types.idl     |    1 +
 tools/libxl/xl_cmdimpl.c        |    7 +++++-
 7 files changed, 76 insertions(+), 37 deletions(-)

diff --git a/tools/libxc/Makefile b/tools/libxc/Makefile
index b659df4..2cd0b1a 100644
--- a/tools/libxc/Makefile
+++ b/tools/libxc/Makefile
@@ -64,8 +64,8 @@ GUEST_SRCS-$(CONFIG_X86) += xc_sr_save_x86_hvm.c
 GUEST_SRCS-y += xc_sr_restore.c
 GUEST_SRCS-y += xc_sr_save.c
 GUEST_SRCS-y += xc_offline_page.c xc_compression.c
-$(patsubst %.c,%.o,$(GUEST_SRCS-y)): CFLAGS += -DXG_LIBXL_HVM_COMPAT
-$(patsubst %.c,%.opic,$(GUEST_SRCS-y)): CFLAGS += -DXG_LIBXL_HVM_COMPAT
+xc_sr_save_x86_hvm.o: CFLAGS += -DXG_LIBXL_HVM_COMPAT
+xc_sr_save_x86_hvm.opic: CFLAGS += -DXG_LIBXL_HVM_COMPAT
 else
 GUEST_SRCS-y += xc_nomigrate.c
 endif
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index e9d63c9..e64a606 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -807,6 +807,23 @@
  */
 #define LIBXL_HAVE_SOCKET_BITMAP_ALLOC 1
 
+/*
+ * LIBXL_HAVE_STREAM_V2
+ *
+ * If this is defined, then the libxl_domain_create_restore() interface takes
+ * a "stream_version" parameter and supports a value of 2.
+ */
+#define LIBXL_HAVE_STREAM_V2 1
+
+/*
+ * LIBXL_HAVE_STREAM_V1
+ *
+ * In the case that LIBXL_HAVE_STREAM_V2 is set, LIBXL_HAVE_STREAM_V1
+ * indicates that libxl_domain_create_restore() can handle a "stream_version"
+ * parameter of 1, and convert the stream format automatically.
+ */
+#define LIBXL_HAVE_STREAM_V1 1
+
 typedef char **libxl_string_list;
 void libxl_string_list_dispose(libxl_string_list *sl);
 int libxl_string_list_length(const libxl_string_list *sl);
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index be13204..2a0063a 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -704,6 +704,10 @@ static void domcreate_attach_dtdev(libxl__egc *egc,
 static void domcreate_console_available(libxl__egc *egc,
                                         libxl__domain_create_state *dcs);
 
+static void domcreate_stream_done(libxl__egc *egc,
+                                  libxl__stream_read_state *srs,
+                                  int ret);
+
 static void domcreate_rebuild_done(libxl__egc *egc,
                                    libxl__domain_create_state *dcs,
                                    int ret);
@@ -933,11 +937,8 @@ static void domcreate_bootloader_done(libxl__egc *egc,
     /* convenience aliases */
     const uint32_t domid = dcs->guest_domid;
     libxl_domain_config *const d_config = dcs->guest_config;
-    libxl_domain_build_info *const info = &d_config->b_info;
     const int restore_fd = dcs->restore_fd;
     libxl__domain_build_state *const state = &dcs->build_state;
-    libxl__srm_restore_autogen_callbacks *const callbacks =
-        &dcs->shs.callbacks.restore.a;
 
     if (rc) {
         domcreate_rebuild_done(egc, dcs, rc);
@@ -970,30 +971,16 @@ static void domcreate_bootloader_done(libxl__egc *egc,
     if (rc)
         goto out;
 
-    /* read signature */
-    int hvm, pae, superpages;
-    switch (info->type) {
-    case LIBXL_DOMAIN_TYPE_HVM:
-        hvm = 1;
-        superpages = 1;
-        pae = libxl_defbool_val(info->u.hvm.pae);
-        callbacks->toolstack_restore = libxl__toolstack_restore;
-        break;
-    case LIBXL_DOMAIN_TYPE_PV:
-        hvm = 0;
-        superpages = 0;
-        pae = 1;
-        break;
-    default:
-        rc = ERROR_INVAL;
-        goto out;
-    }
-    libxl__xc_domain_restore(egc, dcs,
-                             hvm, pae, superpages);
+    dcs->srs.ao = ao;
+    dcs->srs.fd = restore_fd;
+    dcs->srs.legacy = (dcs->restore_params.stream_version == 1);
+    dcs->srs.completion_callback = domcreate_stream_done;
+
+    libxl__stream_read_start(egc, &dcs->srs);
     return;
 
  out:
-    libxl__xc_domain_restore_done(egc, dcs, rc, 0, 0);
+    domcreate_stream_done(egc, &dcs->srs, rc);
 }
 
 void libxl__srm_callout_callback_restore_results(unsigned long store_mfn,
@@ -1009,10 +996,11 @@ void libxl__srm_callout_callback_restore_results(unsigned long store_mfn,
     shs->need_results =           0;
 }
 
-void libxl__xc_domain_restore_done(libxl__egc *egc, void *dcs_void,
-                                   int ret, int retval, int errnoval)
+static void domcreate_stream_done(libxl__egc *egc,
+                                  libxl__stream_read_state *srs,
+                                  int ret)
 {
-    libxl__domain_create_state *dcs = dcs_void;
+    libxl__domain_create_state *dcs = CONTAINER_OF(srs, *dcs, srs);
     STATE_AO_GC(dcs->ao);
     libxl_ctx *ctx = libxl__gc_owner(gc);
     char **vments = NULL, **localents = NULL;
@@ -1029,12 +1017,6 @@ void libxl__xc_domain_restore_done(libxl__egc *egc, void *dcs_void,
     if (ret)
         goto out;
 
-    if (retval) {
-        LOGEV(ERROR, errnoval, "restoring domain");
-        ret = ERROR_FAIL;
-        goto out;
-    }
-
     gettimeofday(&start_time, NULL);
 
     switch (info->type) {
diff --git a/tools/libxl/libxl_save_helper.c b/tools/libxl/libxl_save_helper.c
index 14675ae..efbe2eb 100644
--- a/tools/libxl/libxl_save_helper.c
+++ b/tools/libxl/libxl_save_helper.c
@@ -313,7 +313,7 @@ int main(int argc, char **argv)
         startup("restore");
         setup_signals(SIG_DFL);
 
-        r = xc_domain_restore(xch, io_fd, dom, store_evtchn, &store_mfn,
+        r = xc_domain_restore2(xch, io_fd, dom, store_evtchn, &store_mfn,
                               store_domid, console_evtchn, &console_mfn,
                               console_domid, hvm, pae, superpages,
                               checkpointed,
diff --git a/tools/libxl/libxl_stream_read.c b/tools/libxl/libxl_stream_read.c
index 3011820..81095cd 100644
--- a/tools/libxl/libxl_stream_read.c
+++ b/tools/libxl/libxl_stream_read.c
@@ -139,6 +139,7 @@ void libxl__stream_read_start(libxl__egc *egc,
      * work out whether to tear them down.
      */
     libxl__conversion_helper_init(&dcs->chs);
+    libxl__save_helper_init(&dcs->shs);
 
 #if defined(__x86_64__) || defined(__i386__)
     if (stream->legacy) {
@@ -255,6 +256,11 @@ static void check_stream_finished(libxl__egc *egc,
             libxl__convert_legacy_stream_abort(egc, &dcs->chs, rc);
         }
 
+        if (libxl__save_helper_inuse(&dcs->shs)) {
+            skip = true;
+            libxl__save_helper_abort(egc, &dcs->shs);
+        }
+
         /* There is at least one more active task to join - wait for its
            callback */
         if ( skip )
@@ -265,6 +271,8 @@ static void check_stream_finished(libxl__egc *egc,
         LOG(DEBUG, "stream still in use");
     else if (libxl__convert_legacy_stream_inuse(&dcs->chs))
         LOG(DEBUG, "conversion still in use");
+    else if (libxl__save_helper_inuse(&dcs->shs))
+        LOG(DEBUG, "save/restore still in use");
     else {
         LOG(DEBUG, "Join complete: result %d", stream->joined_rc);
         stream->completion_callback(egc, stream, stream->joined_rc);
@@ -439,6 +447,28 @@ static void record_body_done(libxl__egc *egc,
     stream_failed(egc, stream, ret);
 }
 
+void libxl__xc_domain_restore_done(libxl__egc *egc, void *dcs_void,
+                                   int ret, int retval, int errnoval)
+{
+    libxl__domain_create_state *dcs = dcs_void;
+    STATE_AO_GC(dcs->ao);
+
+    if (ret)
+        goto err;
+
+    if (retval) {
+        LOGEV(ERROR, errnoval, "restoring domain");
+        ret = ERROR_FAIL;
+        goto err;
+    }
+
+    stream_continue(egc, &dcs->srs);
+    return;
+
+ err:
+    check_stream_finished(egc, &dcs->srs, ret, "save/restore helper");
+}
+
 #if defined(__x86_64__) || defined(__i386__)
 static void conversion_done(libxl__egc *egc,
                             libxl__conversion_helper_state *chs, int rc)
@@ -477,6 +507,10 @@ static bool process_record(libxl__egc *egc,
         stream_success(egc, stream);
         break;
 
+    case REC_TYPE_LIBXC_CONTEXT:
+        libxl__xc_domain_restore(egc, dcs, 0, 0, 0);
+        break;
+
     case REC_TYPE_XENSTORE_DATA:
         ret = libxl__toolstack_restore(dcs->guest_domid, rec->body,
                                        rec->hdr.length, &dcs->shs);
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 8dacf8d..bc0c4ef 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -355,6 +355,7 @@ libxl_domain_create_info = Struct("domain_create_info",[
 
 libxl_domain_restore_params = Struct("domain_restore_params", [
     ("checkpointed_stream", integer),
+    ("stream_version", uint32, {'init_val': '1'}),
     ])
 
 libxl_domain_sched_params = Struct("domain_sched_params",[
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index 26b1e7d..71a22b8 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -110,7 +110,9 @@
 
 #define XL_MANDATORY_FLAG_JSON (1U << 0) /* config data is in JSON format */
 #define XL_MANDATORY_FLAG_STREAMv2 (1U << 1) /* stream is v2 */
-#define XL_MANDATORY_FLAG_ALL  (XL_MANDATORY_FLAG_JSON)
+#define XL_MANDATORY_FLAG_ALL  (XL_MANDATORY_FLAG_JSON |        \
+                                XL_MANDATORY_FLAG_STREAMv2)
+
 struct save_file_header {
     char magic[32]; /* savefileheader_magic */
     /* All uint32_ts are in domain's byte order. */
@@ -2757,6 +2759,9 @@ static uint32_t create_domain(struct domain_create *dom_info)
         libxl_domain_restore_params_init(&params);
 
         params.checkpointed_stream = dom_info->checkpointed_stream;
+        params.stream_version =
+            (hdr.mandatory_flags & XL_MANDATORY_FLAG_STREAMv2) ? 2 : 1;
+
         ret = libxl_domain_create_restore(ctx, &d_config,
                                           &domid, restore_fd,
                                           &params,
-- 
1.7.10.4

  parent reply	other threads:[~2015-07-09 18:26 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-09 18:26 [PATCH v2 00/27] Libxl migration v2 Andrew Cooper
2015-07-09 18:26 ` [PATCH v2 01/27] bsd-sys-queue-h-seddery: Massage `offsetof' Andrew Cooper
2015-07-10  9:32   ` Ian Campbell
2015-07-09 18:26 ` [PATCH v2 02/27] tools/libxc: Always compile the compat qemu variables into xc_sr_context Andrew Cooper
2015-07-09 18:26 ` [PATCH v2 03/27] tools/libxl: Introduce ROUNDUP() Andrew Cooper
2015-07-09 18:26 ` [PATCH v2 04/27] tools/libxl: Introduce libxl__kill() Andrew Cooper
2015-07-10  1:34   ` Yang Hongyang
2015-07-10  8:56     ` Andrew Cooper
2015-07-10  9:08   ` Wei Liu
2015-07-10  9:25     ` Andrew Cooper
2015-07-10  9:34     ` Ian Campbell
2015-07-09 18:26 ` [PATCH v2 05/27] tools/libxl: Stash all restore parameters in domain_create_state Andrew Cooper
2015-07-09 18:26 ` [PATCH v2 06/27] tools/libxl: Split libxl__domain_create_state.restore_fd in two Andrew Cooper
2015-07-10  9:37   ` Ian Campbell
2015-07-09 18:26 ` [PATCH v2 07/27] tools/libxl: Extra management APIs for the save helper Andrew Cooper
2015-07-10  9:41   ` Ian Campbell
2015-07-10  9:52     ` Andrew Cooper
2015-07-09 18:26 ` [PATCH v2 08/27] tools/xl: Mandatory flag indicating the format of the migration stream Andrew Cooper
2015-07-09 18:26 ` [PATCH v2 09/27] docs: Libxl migration v2 stream specification Andrew Cooper
2015-07-10  9:46   ` Ian Campbell
2015-07-09 18:26 ` [PATCH v2 10/27] tools/python: Libxc migration v2 infrastructure Andrew Cooper
2015-07-09 18:26 ` [PATCH v2 11/27] tools/python: Libxl " Andrew Cooper
2015-07-09 18:26 ` [PATCH v2 12/27] tools/python: Other migration infrastructure Andrew Cooper
2015-07-10  9:48   ` Ian Campbell
2015-07-09 18:26 ` [PATCH v2 13/27] tools/python: Verification utility for v2 stream spec compliance Andrew Cooper
2015-07-09 18:26 ` [PATCH v2 14/27] tools/python: Conversion utility for legacy migration streams Andrew Cooper
2015-07-09 18:26 ` [PATCH v2 15/27] tools/libxl: Migration v2 stream format Andrew Cooper
2015-07-10  9:49   ` Ian Campbell
2015-07-09 18:26 ` [PATCH v2 16/27] tools/libxl: Infrastructure for reading a libxl migration v2 stream Andrew Cooper
2015-07-10 10:23   ` Ian Campbell
2015-07-10 10:47     ` Andrew Cooper
2015-07-10 11:16       ` Ian Jackson
2015-07-10 11:25       ` Ian Campbell
2015-07-10 12:28         ` Andrew Cooper
2015-07-10 12:46           ` Ian Jackson
2015-07-10 12:50             ` Andrew Cooper
2015-07-10 12:17   ` Ian Jackson
2015-07-10 12:56     ` Andrew Cooper
2015-07-10 13:09       ` Ian Jackson
2015-07-09 18:26 ` [PATCH v2 17/27] tools/libxl: Support converting a legacy stream to a " Andrew Cooper
2015-07-10 10:28   ` Ian Campbell
2015-07-10 10:39     ` Andrew Cooper
2015-07-10 12:28   ` Ian Jackson
2015-07-09 18:26 ` [PATCH v2 18/27] tools/libxl: Convert a legacy stream if needed Andrew Cooper
2015-07-10 10:31   ` Ian Campbell
2015-07-10 12:41   ` Ian Jackson
2015-07-09 18:26 ` Andrew Cooper [this message]
2015-07-10 10:45   ` [PATCH v2 19/27] tools/libxc+libxl+xl: Restore v2 streams Ian Campbell
2015-07-09 18:26 ` [PATCH v2 20/27] tools/libxl: Infrastructure for writing a v2 stream Andrew Cooper
2015-07-10 11:10   ` Ian Campbell
2015-07-09 18:26 ` [PATCH v2 21/27] tools/libxc+libxl+xl: Save v2 streams Andrew Cooper
2015-07-10 10:57   ` Ian Campbell
2015-07-09 18:26 ` [PATCH v2 22/27] docs/libxl: Introduce CHECKPOINT_END to support migration v2 remus streams Andrew Cooper
2015-07-10 10:59   ` Ian Campbell
2015-07-09 18:26 ` [PATCH v2 23/27] tools/libxl: Write checkpoint records into the stream Andrew Cooper
2015-07-10 11:02   ` Ian Campbell
2015-07-10 11:47   ` Wei Liu
2015-07-09 18:26 ` [PATCH v2 24/27] tools/libx{c, l}: Introduce restore_callbacks.checkpoint() Andrew Cooper
2015-07-10 11:13   ` Ian Campbell
2015-07-09 18:26 ` [PATCH v2 25/27] tools/libxl: Handle checkpoint records in a libxl migration v2 stream Andrew Cooper
2015-07-10 11:18   ` Ian Campbell
2015-07-10 14:34     ` Andrew Cooper
2015-07-09 18:26 ` [PATCH v2 26/27] tools/libxc: Drop all XG_LIBXL_HVM_COMPAT code from libxc Andrew Cooper
2015-07-09 18:26 ` [PATCH v2 27/27] tools/libxl: Drop all knowledge of toolstack callbacks Andrew Cooper
2015-07-10  3:01 ` [PATCH v2 00/27] Libxl migration v2 Yang Hongyang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1436466413-25867-20-git-send-email-andrew.cooper3@citrix.com \
    --to=andrew.cooper3@citrix.com \
    --cc=Ian.Campbell@citrix.com \
    --cc=Ian.Jackson@eu.citrix.com \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.