All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dave Gordon <david.s.gordon@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 04/13 v4] drm/i915: GuC-specific firmware loader
Date: Thu,  9 Jul 2015 19:29:05 +0100	[thread overview]
Message-ID: <1436466554-24806-5-git-send-email-david.s.gordon@intel.com> (raw)
In-Reply-To: <1436466554-24806-1-git-send-email-david.s.gordon@intel.com>

From: Alex Dai <yu.dai@intel.com>

This fetches the required firmware image from the filesystem,
then loads it into the GuC's memory via a dedicated DMA engine.

This patch is derived from GuC loading work originally done by
Vinit Azad and Ben Widawsky.

v2:
    Various improvements per review comments by Chris Wilson

v3:
    Removed 'wait' parameter to intel_guc_ucode_load() as firmware
        prefetch is no longer supported in the common firmware loader,
	per Daniel Vetter's request.
    Firmware checker callback fn now returns errno rather than bool.

v4:
    Squash uC-independent code into GuC-specifc loader [Daniel Vetter]
    Don't keep the driver working (by falling back to execlist mode)
        if GuC firmware loading fails [Daniel Vetter]

Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
---
 drivers/gpu/drm/i915/Makefile           |   3 +
 drivers/gpu/drm/i915/i915_dma.c         |   4 +
 drivers/gpu/drm/i915/i915_drv.h         |  11 +
 drivers/gpu/drm/i915/i915_gem.c         |  13 +
 drivers/gpu/drm/i915/i915_reg.h         |   4 +-
 drivers/gpu/drm/i915/intel_guc.h        |  67 ++++
 drivers/gpu/drm/i915/intel_guc_loader.c | 536 ++++++++++++++++++++++++++++++++
 7 files changed, 637 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/i915/intel_guc.h
 create mode 100644 drivers/gpu/drm/i915/intel_guc_loader.c

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index de21965..e604cfe 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -39,6 +39,9 @@ i915-y += i915_cmd_parser.o \
 	  intel_ringbuffer.o \
 	  intel_uncore.o
 
+# general-purpose microcontroller (GuC) support
+i915-y += intel_guc_loader.o
+
 # autogenerated null render state
 i915-y += intel_renderstate_gen6.o \
 	  intel_renderstate_gen7.o \
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 066c34c..958ab4f 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -472,6 +472,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
 
 cleanup_gem:
 	mutex_lock(&dev->struct_mutex);
+	intel_guc_ucode_fini(dev);
 	i915_gem_cleanup_ringbuffer(dev);
 	i915_gem_context_fini(dev);
 	mutex_unlock(&dev->struct_mutex);
@@ -869,6 +870,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 
 	intel_uncore_init(dev);
 
+	intel_guc_ucode_init(dev);
+
 	/* Load CSR Firmware for SKL */
 	intel_csr_ucode_init(dev);
 
@@ -1120,6 +1123,7 @@ int i915_driver_unload(struct drm_device *dev)
 	flush_workqueue(dev_priv->wq);
 
 	mutex_lock(&dev->struct_mutex);
+	intel_guc_ucode_fini(dev);
 	i915_gem_cleanup_ringbuffer(dev);
 	i915_gem_context_fini(dev);
 	mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 4a512da..15b9202 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -50,6 +50,7 @@
 #include <linux/intel-iommu.h>
 #include <linux/kref.h>
 #include <linux/pm_qos.h>
+#include "intel_guc.h"
 
 /* General customization:
  */
@@ -1694,6 +1695,8 @@ struct drm_i915_private {
 
 	struct i915_virtual_gpu vgpu;
 
+	struct intel_guc guc;
+
 	struct intel_csr csr;
 
 	/* Display CSR-related protection */
@@ -1938,6 +1941,11 @@ static inline struct drm_i915_private *dev_to_i915(struct device *dev)
 	return to_i915(dev_get_drvdata(dev));
 }
 
+static inline struct drm_i915_private *guc_to_i915(struct intel_guc *guc)
+{
+	return container_of(guc, struct drm_i915_private, guc);
+}
+
 /* Iterate over initialised rings */
 #define for_each_ring(ring__, dev_priv__, i__) \
 	for ((i__) = 0; (i__) < I915_NUM_RINGS; (i__)++) \
@@ -2543,6 +2551,9 @@ struct drm_i915_cmd_table {
 
 #define HAS_CSR(dev)	(IS_SKYLAKE(dev))
 
+#define HAS_GUC_UCODE(dev)	(IS_GEN9(dev))
+#define HAS_GUC_SCHED(dev)	(IS_GEN9(dev))
+
 #define HAS_RESOURCE_STREAMER(dev) (IS_HASWELL(dev) || \
 				    INTEL_INFO(dev)->gen >= 8)
 
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index dbbb649..e020309 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -5074,6 +5074,19 @@ i915_gem_init_hw(struct drm_device *dev)
 			goto out;
 	}
 
+	/* We can't enable contexts until all firmware is loaded */
+	ret = intel_guc_ucode_load(dev);
+
+	/*
+	 * If we got an error and GuC submission is enabled, map
+	 * the error to -EIO so the GPU will be declared wedged.
+	 * OTOH, if we didn't intend to use the GuC anyway, just
+	 * discard the error and carry on.
+	 */
+	ret = ret && i915.enable_guc_submission ? -EIO : 0;
+	if (ret)
+		goto out;
+
 	/* Now it is safe to go back round and do everything else: */
 	for_each_ring(ring, dev_priv, i) {
 		struct drm_i915_gem_request *req;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2a29bcc..63728c1 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6843,7 +6843,9 @@ enum skl_disp_power_wells {
 #define   GEN9_PGCTL_SSB_EU311_ACK	(1 << 14)
 
 #define GEN7_MISCCPCTL			(0x9424)
-#define   GEN7_DOP_CLOCK_GATE_ENABLE	(1<<0)
+#define   GEN7_DOP_CLOCK_GATE_ENABLE		(1<<0)
+#define   GEN8_DOP_CLOCK_GATE_CFCLK_ENABLE	(1<<2)
+#define   GEN8_DOP_CLOCK_GATE_GUC_ENABLE	(1<<4)
 
 /* IVYBRIDGE DPF */
 #define GEN7_L3CDERRST1			0xB008 /* L3CD Error Status 1 */
diff --git a/drivers/gpu/drm/i915/intel_guc.h b/drivers/gpu/drm/i915/intel_guc.h
new file mode 100644
index 0000000..2846b6d
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_guc.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#ifndef _INTEL_GUC_H_
+#define _INTEL_GUC_H_
+
+#include "intel_guc_fwif.h"
+#include "i915_guc_reg.h"
+
+enum intel_guc_fw_status {
+	GUC_FIRMWARE_FAIL = -1,
+	GUC_FIRMWARE_NONE = 0,
+	GUC_FIRMWARE_PENDING,
+	GUC_FIRMWARE_SUCCESS
+};
+
+/*
+ * This structure encapsulates all the data needed during the process
+ * of fetching, caching, and loading the firmware image into the GuC.
+ */
+struct intel_guc_fw {
+	struct drm_device *		guc_dev;
+	const char *			guc_fw_path;
+	size_t				guc_fw_size;
+	struct drm_i915_gem_object *	guc_fw_obj;
+	enum intel_guc_fw_status	guc_fw_fetch_status;
+	enum intel_guc_fw_status	guc_fw_load_status;
+
+	uint16_t			guc_fw_major_wanted;
+	uint16_t			guc_fw_minor_wanted;
+	uint16_t			guc_fw_major_found;
+	uint16_t			guc_fw_minor_found;
+};
+
+struct intel_guc {
+	struct intel_guc_fw guc_fw;
+
+	uint32_t log_flags;
+};
+
+/* intel_guc_loader.c */
+extern void intel_guc_ucode_init(struct drm_device *dev);
+extern int intel_guc_ucode_load(struct drm_device *dev);
+extern void intel_guc_ucode_fini(struct drm_device *dev);
+extern const char *intel_guc_fw_status_repr(enum intel_guc_fw_status status);
+
+#endif
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
new file mode 100644
index 0000000..2080bca
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_guc_loader.c
@@ -0,0 +1,536 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Vinit Azad <vinit.azad@intel.com>
+ *    Ben Widawsky <ben@bwidawsk.net>
+ *    Dave Gordon <david.s.gordon@intel.com>
+ *    Alex Dai <yu.dai@intel.com>
+ */
+#include <linux/firmware.h>
+#include "i915_drv.h"
+#include "intel_guc.h"
+
+/**
+ * DOC: GuC
+ *
+ * intel_guc:
+ * Top level structure of guc. It handles firmware loading and manages client
+ * pool and doorbells. intel_guc owns a i915_guc_client to replace the legacy
+ * ExecList submission.
+ *
+ * Firmware versioning:
+ * The firmware build process will generate a version header file with major and
+ * minor version defined. The versions are built into CSS header of firmware.
+ * i915 kernel driver set the minimal firmware version required per platform.
+ * The firmware installation package will install (symbolic link) proper version
+ * of firmware.
+ *
+ * GuC address space:
+ * GuC does not allow any gfx GGTT address that falls into range [0, WOPCM_TOP),
+ * which is reserved for Boot ROM, SRAM and WOPCM. Currently this top address is
+ * 512K. In order to exclude 0-512K address space from GGTT, all gfx objects
+ * used by GuC is pinned with PIN_OFFSET_BIAS along with size of WOPCM.
+ *
+ * Firmware log:
+ * Firmware log is enabled by setting i915.guc_log_level to non-negative level.
+ * Log data is printed out via reading debugfs i915_guc_log_dump. Reading from
+ * i915_guc_load_status will print out firmware loading status and scratch
+ * registers value.
+ *
+ */
+
+#define I915_SKL_GUC_UCODE "i915/skl_guc_ver3.bin"
+MODULE_FIRMWARE(I915_SKL_GUC_UCODE);
+
+/* User-friendly representation of an enum */
+const char *intel_guc_fw_status_repr(enum intel_guc_fw_status status)
+{
+	switch (status) {
+	case GUC_FIRMWARE_FAIL:
+		return "FAIL";
+	case GUC_FIRMWARE_NONE:
+		return "NONE";
+	case GUC_FIRMWARE_PENDING:
+		return "PENDING";
+	case GUC_FIRMWARE_SUCCESS:
+		return "SUCCESS";
+	default:
+		return "UNKNOWN!";
+	}
+};
+
+static u32 get_gttype(struct drm_i915_private *dev_priv)
+{
+	/* XXX: GT type based on PCI device ID? field seems unused by fw */
+	return 0;
+}
+
+static u32 get_core_family(struct drm_i915_private *dev_priv)
+{
+	switch (INTEL_INFO(dev_priv)->gen) {
+	case 8:
+		return GFXCORE_FAMILY_GEN8;
+	case 9:
+		return GFXCORE_FAMILY_GEN9;
+	default:
+		DRM_ERROR("GUC: unknown gen for scheduler init\n");
+		return GFXCORE_FAMILY_FORCE_ULONG;
+	}
+}
+
+static void set_guc_init_params(struct drm_i915_private *dev_priv)
+{
+	struct intel_guc *guc = &dev_priv->guc;
+	u32 params[GUC_CTL_MAX_DWORDS];
+	int i;
+
+	memset(&params, 0, sizeof(params));
+
+	params[GUC_CTL_DEVICE_INFO] |=
+		(get_gttype(dev_priv) << GUC_CTL_GTTYPE_SHIFT) |
+		(get_core_family(dev_priv) << GUC_CTL_COREFAMILY_SHIFT);
+
+	/* GuC ARAT increment is 10 ns. GuC default scheduler quantum is one
+	 * second. This ARAR is calculated by:
+	 * Scheduler-Quantum-in-ns / ARAT-increment-in-ns = 1000000000 / 10
+	 */
+	params[GUC_CTL_ARAT_HIGH] = 0;
+	params[GUC_CTL_ARAT_LOW] = 100000000;
+
+	params[GUC_CTL_WA] |= GUC_CTL_WA_UK_BY_DRIVER;
+
+	params[GUC_CTL_FEATURE] |= GUC_CTL_DISABLE_SCHEDULER |
+			GUC_CTL_VCS2_ENABLED;
+
+	if (i915.guc_log_level >= 0) {
+		params[GUC_CTL_LOG_PARAMS] = guc->log_flags;
+		params[GUC_CTL_DEBUG] =
+			i915.guc_log_level << GUC_LOG_VERBOSITY_SHIFT;
+	}
+
+	I915_WRITE(SOFT_SCRATCH(0), 0);
+
+	for (i = 0; i < GUC_CTL_MAX_DWORDS; i++)
+		I915_WRITE(SOFT_SCRATCH(1 + i), params[i]);
+}
+
+/*
+ * Read the GuC status register (GUC_STATUS) and store it in the
+ * specified location; then return a boolean indicating whether
+ * the value matches either of two values representing completion
+ * of the GuC boot process.
+ *
+ * This is used for polling the GuC status in a wait_for_atomic()
+ * loop below.
+ */
+static inline bool guc_ucode_response(struct drm_i915_private *dev_priv,
+				      u32 *status)
+{
+	u32 val = I915_READ(GUC_STATUS);
+	*status = val;
+	return ((val & GS_UKERNEL_MASK) == GS_UKERNEL_READY ||
+		(val & GS_UKERNEL_MASK) == GS_UKERNEL_LAPIC_DONE);
+}
+
+/*
+ * Transfer the firmware image to RAM for execution by the microcontroller.
+ *
+ * GuC Firmware layout:
+ * +-------------------------------+  ----
+ * |          CSS header           |  128B
+ * | contains major/minor version  |
+ * +-------------------------------+  ----
+ * |             uCode             |
+ * +-------------------------------+  ----
+ * |         RSA signature         |  256B
+ * +-------------------------------+  ----
+ * |         RSA public Key        |  256B
+ * +-------------------------------+  ----
+ * |       Public key modulus      |    4B
+ * +-------------------------------+  ----
+ *
+ * Architecturally, the DMA engine is bidirectional, and can potentially even
+ * transfer between GTT locations. This functionality is left out of the API
+ * for now as there is no need for it.
+ *
+ * Note that GuC needs the CSS header plus uKernel code to be copied by the
+ * DMA engine in one operation, whereas the RSA signature is loaded via MMIO.
+ */
+
+#define UOS_CSS_HEADER_OFFSET		0
+#define UOS_VER_MINOR_OFFSET		0x44
+#define UOS_VER_MAJOR_OFFSET		0x46
+#define UOS_CSS_HEADER_SIZE		0x80
+#define UOS_RSA_SIG_SIZE		0x100
+#define UOS_CSS_SIGNING_SIZE		0x204
+
+static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv)
+{
+	struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
+	struct drm_i915_gem_object *fw_obj = guc_fw->guc_fw_obj;
+	unsigned long offset;
+	struct sg_table *sg = fw_obj->pages;
+	u32 status, ucode_size, rsa[UOS_RSA_SIG_SIZE / sizeof(u32)];
+	int i, ret = 0;
+
+	/* uCode size, also is where RSA signature starts */
+	offset = ucode_size = guc_fw->guc_fw_size - UOS_CSS_SIGNING_SIZE;
+
+	/* Copy RSA signature from the fw image to HW for verification */
+	sg_pcopy_to_buffer(sg->sgl, sg->nents, rsa, UOS_RSA_SIG_SIZE, offset);
+	for (i = 0; i < UOS_RSA_SIG_SIZE / sizeof(u32); i++)
+		I915_WRITE(UOS_RSA_SCRATCH_0 + i * sizeof(u32), rsa[i]);
+
+	/* Set the source address for the new blob */
+	offset = i915_gem_obj_ggtt_offset(fw_obj);
+	I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
+	I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
+
+	/* Set the destination. Current uCode expects an 8k stack starting from
+	 * offset 0. */
+	I915_WRITE(DMA_ADDR_1_LOW, 0x2000);
+
+	/* XXX: The image is automatically transfered to SRAM after the RSA
+	 * verification. This is why the address space is chosen as such. */
+	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
+
+	I915_WRITE(DMA_COPY_SIZE, ucode_size);
+
+	/* Finally start the DMA */
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
+
+	/*
+	 * Spin-wait for the DMA to complete & the GuC to start up.
+	 * NB: Docs recommend not using the interrupt for completion.
+	 * Measurements indicate this should take no more than 20ms, so a
+	 * timeout here indicates that the GuC has failed and is unusable.
+	 * (Higher levels of the driver will attempt to fall back to
+	 * execlist mode if this happens.)
+	 */
+	ret = wait_for_atomic(guc_ucode_response(dev_priv, &status), 100);
+
+	DRM_DEBUG_DRIVER("DMA status 0x%x, GuC status 0x%x\n",
+			I915_READ(DMA_CTRL), status);
+
+	if ((status & GS_BOOTROM_MASK) == GS_BOOTROM_RSA_FAILED) {
+		DRM_ERROR("GuC firmware signature verification failed\n");
+		ret = -ENOEXEC;
+	}
+
+	DRM_DEBUG_DRIVER("returning %d\n", ret);
+
+	return ret;
+}
+
+/*
+ * Load the GuC firmware blob into the MinuteIA.
+ */
+static int guc_ucode_xfer(struct drm_i915_private *dev_priv)
+{
+	struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
+	struct drm_device *dev = dev_priv->dev;
+	int ret;
+
+	ret = i915_gem_object_set_to_gtt_domain(guc_fw->guc_fw_obj, false);
+	if (ret) {
+		DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
+		return ret;
+	}
+
+	ret = i915_gem_obj_ggtt_pin(guc_fw->guc_fw_obj, 0, 0);
+	if (ret) {
+		DRM_DEBUG_DRIVER("pin failed %d\n", ret);
+		return ret;
+	}
+
+	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+	/* init WOPCM */
+	I915_WRITE(GUC_WOPCM_SIZE, GUC_WOPCM_SIZE_VALUE);
+	I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET);
+
+	/* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
+	I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
+
+	/* Set MMIO/WA for GuC init */
+	I915_WRITE(DRBMISC1, DOORBELL_ENABLE);
+
+	/* Enable MIA caching. GuC clock gating is disabled. */
+	I915_WRITE(GUC_SHIM_CONTROL, GUC_SHIM_CONTROL_VALUE);
+
+	/* WaC6DisallowByGfxPause*/
+	I915_WRITE(GEN6_GFXPAUSE, 0x30FFF);
+
+	if (IS_SKYLAKE(dev))
+		I915_WRITE(GEN9_GT_PM_CONFIG, GEN8_GT_DOORBELL_ENABLE);
+	else
+		I915_WRITE(GEN8_GT_PM_CONFIG, GEN8_GT_DOORBELL_ENABLE);
+
+	if (IS_GEN9(dev)) {
+		/* DOP Clock Gating Enable for GuC clocks */
+		I915_WRITE(GEN7_MISCCPCTL, (GEN8_DOP_CLOCK_GATE_GUC_ENABLE |
+					    I915_READ(GEN7_MISCCPCTL)));
+
+		/* allows for 5us before GT can go to RC6 */
+		I915_WRITE(GUC_ARAT_C6DIS, 0x1FF);
+	}
+
+	set_guc_init_params(dev_priv);
+
+	ret = guc_ucode_xfer_dma(dev_priv);
+
+	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+
+	/*
+	 * We keep the object pages for reuse during resume. But we can unpin it
+	 * now that DMA has completed, so it doesn't continue to take up space.
+	 */
+	i915_gem_object_ggtt_unpin(guc_fw->guc_fw_obj);
+
+	return ret;
+}
+
+static void guc_fw_fetch(struct drm_device *dev, struct intel_guc_fw *guc_fw)
+{
+	struct drm_i915_gem_object *obj;
+	const struct firmware *fw;
+	const u8 *css_header;
+	const size_t minsize = UOS_CSS_HEADER_SIZE + UOS_CSS_SIGNING_SIZE;
+	const size_t maxsize = GUC_WOPCM_SIZE_VALUE + UOS_CSS_SIGNING_SIZE
+			- 0x8000; /* 32k reserved (8K stack + 24k context) */
+
+	DRM_DEBUG_DRIVER("before requesting firmware: GuC fw fetch status %s\n",
+		intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status));
+
+	if (request_firmware(&fw, guc_fw->guc_fw_path, &dev->pdev->dev))
+		goto fail;
+	if (!fw)
+		goto fail;
+
+	DRM_DEBUG_DRIVER("fetch GuC fw from %s succeeded, fw %p\n",
+		guc_fw->guc_fw_path, fw);
+
+	DRM_DEBUG_DRIVER("firmware file size %zu (minimum %zu, maximum %zu)\n",
+		fw->size, minsize, maxsize);
+
+	/* Check the size of the blob befoe examining buffer contents */
+	if (fw->size < minsize || fw->size > maxsize)
+		goto fail;
+
+	/*
+	 * The GuC firmware image has the version number embedded at a well-known
+	 * offset within the firmware blob; note that major / minor version are
+	 * TWO bytes each (i.e. u16), although all pointers and offsets are defined
+	 * in terms of bytes (u8).
+	 */
+	css_header = fw->data + UOS_CSS_HEADER_OFFSET;
+	guc_fw->guc_fw_major_found = *(u16 *)(css_header + UOS_VER_MAJOR_OFFSET);
+	guc_fw->guc_fw_minor_found = *(u16 *)(css_header + UOS_VER_MINOR_OFFSET);
+
+	if (guc_fw->guc_fw_major_found != guc_fw->guc_fw_major_wanted ||
+	    guc_fw->guc_fw_minor_found < guc_fw->guc_fw_minor_wanted) {
+		DRM_ERROR("GuC firmware version %d.%d, required %d.%d\n",
+			guc_fw->guc_fw_major_found, guc_fw->guc_fw_minor_found,
+			guc_fw->guc_fw_major_wanted, guc_fw->guc_fw_minor_wanted);
+		goto fail;
+	}
+
+	DRM_DEBUG_DRIVER("firmware version %d.%d OK (minimum %d.%d)\n",
+			guc_fw->guc_fw_major_found, guc_fw->guc_fw_minor_found,
+			guc_fw->guc_fw_major_wanted, guc_fw->guc_fw_minor_wanted);
+
+	obj = i915_gem_object_create_from_data(dev, fw->data, fw->size);
+	if (!obj)
+		goto fail;
+
+	guc_fw->guc_fw_obj = obj;
+	guc_fw->guc_fw_size = fw->size;
+
+	DRM_DEBUG_DRIVER("GuC fw fetch status SUCCESS, obj %p\n",
+			guc_fw->guc_fw_obj);
+
+	release_firmware(fw);
+	guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_SUCCESS;
+	return;
+
+fail:
+	DRM_DEBUG_DRIVER("GuC fw fetch status FAIL; fw %p, obj %p\n",
+		fw, guc_fw->guc_fw_obj);
+	DRM_ERROR("Failed to fetch GuC firmware from %s\n",
+		  guc_fw->guc_fw_path);
+
+	obj = guc_fw->guc_fw_obj;
+	if (obj)
+		drm_gem_object_unreference(&obj->base);
+	guc_fw->guc_fw_obj = NULL;
+
+	release_firmware(fw);		/* OK even if fw is NULL */
+	guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_FAIL;
+}
+
+/**
+ * intel_guc_ucode_load() - load GuC uCode into the device
+ * @dev:	drm device
+ *
+ * Called from gem_init_hw() during driver loading and also after a GPU reset.
+ *
+ * On the first call only, this will fetch the blob from the filesystem;
+ * thereafter, we will already either have the blob in a GEM object, or
+ * have determined that no valid firmware image could be found.
+ *
+ * If we have a good firmware image, transfer it to the h/w.
+ *
+ * Return:	non-zero code on error
+ */
+int intel_guc_ucode_load(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
+	int err = 0;
+
+	DRM_DEBUG_DRIVER("GuC fw status: fetch %s, load %s\n",
+		intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
+		intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
+
+	if (guc_fw->guc_fw_fetch_status == GUC_FIRMWARE_NONE)
+		return 0;
+
+	if (guc_fw->guc_fw_fetch_status == GUC_FIRMWARE_SUCCESS &&
+	    guc_fw->guc_fw_load_status == GUC_FIRMWARE_FAIL)
+		return -ENOEXEC;
+
+	guc_fw->guc_fw_load_status = GUC_FIRMWARE_PENDING;
+	if (guc_fw->guc_fw_fetch_status == GUC_FIRMWARE_PENDING) {
+		/* We only come here once */
+		guc_fw_fetch(dev, guc_fw);
+		/* status must now be FAIL or SUCCESS */
+	}
+
+	DRM_DEBUG_DRIVER("GuC fw fetch status %s\n",
+		intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status));
+
+	switch (guc_fw->guc_fw_fetch_status) {
+	case GUC_FIRMWARE_FAIL:
+		/* something went wrong :( */
+		err = -EIO;
+		goto fail;
+
+	case GUC_FIRMWARE_NONE:
+	case GUC_FIRMWARE_PENDING:
+	default:
+		/* "can't happen" */
+		WARN_ONCE(1, "GuC fw %s invalid guc_fw_fetch_status %s [%d]\n",
+			guc_fw->guc_fw_path,
+			intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
+			guc_fw->guc_fw_fetch_status);
+		err = -ENXIO;
+		goto fail;
+
+	case GUC_FIRMWARE_SUCCESS:
+		break;
+	}
+
+	err = guc_ucode_xfer(dev_priv);
+	if (err)
+		goto fail;
+
+	guc_fw->guc_fw_load_status = GUC_FIRMWARE_SUCCESS;
+
+	DRM_DEBUG_DRIVER("GuC fw status: fetch %s, load %s\n",
+		intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
+		intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
+
+	return 0;
+
+fail:
+	if (guc_fw->guc_fw_load_status == GUC_FIRMWARE_PENDING)
+		guc_fw->guc_fw_load_status = GUC_FIRMWARE_FAIL;
+
+	DRM_ERROR("Failed to initialize GuC, error %d\n", err);
+
+	return err;
+}
+
+/**
+ * intel_guc_ucode_init() - define parameters for fetching firmware
+ * @dev:	drm device
+ *
+ * Called early during driver load, before GEM is initialised.
+ * Driver is single threaded, so no mutex is required.
+ *
+ * This just sets parameters for use when intel_guc_ucode_load()
+ * is called later, after GEM initialisation is complete.
+ */
+void intel_guc_ucode_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
+	const char *fw_path;
+
+	if (!HAS_GUC_SCHED(dev))
+		i915.enable_guc_submission = false;
+
+	if (!HAS_GUC_UCODE(dev)) {
+		fw_path = NULL;
+	} else if (IS_SKYLAKE(dev)) {
+		fw_path = I915_SKL_GUC_UCODE;
+		guc_fw->guc_fw_major_wanted = 3;
+		guc_fw->guc_fw_minor_wanted = 0;
+	} else {
+		i915.enable_guc_submission = false;
+		fw_path = "";	/* unknown device */
+	}
+
+	guc_fw->guc_dev = dev;
+	guc_fw->guc_fw_path = fw_path;
+	guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_NONE;
+	guc_fw->guc_fw_load_status = GUC_FIRMWARE_NONE;
+
+	if (fw_path == NULL)
+		return;
+
+	if (*fw_path == '\0') {
+		DRM_ERROR("No GuC firmware known for this platform\n");
+		guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_FAIL;
+		return;
+	}
+
+	guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_PENDING;
+	DRM_DEBUG_DRIVER("GuC firmware pending, path %s\n", fw_path);
+}
+
+/**
+ * intel_guc_ucode_fini() - clean up all allocated resources
+ * @dev:	drm device
+ */
+void intel_guc_ucode_fini(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
+
+	if (guc_fw->guc_fw_obj)
+		drm_gem_object_unreference(&guc_fw->guc_fw_obj->base);
+	guc_fw->guc_fw_obj = NULL;
+
+	guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_NONE;
+}
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2015-07-09 18:29 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-09 18:29 [PATCH 00/13 v4] Batch submission via GuC Dave Gordon
2015-07-09 18:29 ` [PATCH 01/13 v4] drm/i915: Add i915_gem_object_create_from_data() Dave Gordon
2015-07-18  0:36   ` O'Rourke, Tom
2015-07-09 18:29 ` [PATCH 02/13 v4] drm/i915: Add GuC-related module parameters Dave Gordon
2015-07-18  0:37   ` O'Rourke, Tom
2015-07-09 18:29 ` [PATCH 03/13 v4] drm/i915: Add GuC-related header files Dave Gordon
2015-07-18  0:38   ` O'Rourke, Tom
2015-07-21  6:38     ` Daniel Vetter
2015-07-24 22:08       ` O'Rourke, Tom
2015-07-09 18:29 ` Dave Gordon [this message]
2015-07-13 15:35   ` [PATCH 04/13 v4] drm/i915: GuC-specific firmware loader Daniel Vetter
2015-07-18  0:35   ` O'Rourke, Tom
2015-07-20 16:18     ` Yu Dai
2015-07-09 18:29 ` [PATCH 05/13 v4] drm/i915: Debugfs interface to read GuC load status Dave Gordon
2015-07-18  0:39   ` O'Rourke, Tom
2015-07-09 18:29 ` [PATCH 06/13 v4] drm/i915: Expose two LRC functions for GuC submission mode Dave Gordon
2015-07-24 22:12   ` O'Rourke, Tom
2015-07-09 18:29 ` [PATCH 07/13 v4] drm/i915: GuC submission setup, phase 1 Dave Gordon
2015-07-24 22:31   ` O'Rourke, Tom
2015-07-27 22:41     ` Yu Dai
2015-07-27 23:12       ` O'Rourke, Tom
2015-07-28  0:18         ` Yu Dai
2015-07-28 15:16         ` Dave Gordon
2015-07-28 19:40           ` Dave Gordon
2015-07-28 22:42             ` O'Rourke, Tom
2015-07-28 21:38           ` O'Rourke, Tom
2015-07-09 18:29 ` [PATCH 08/13 v4] drm/i915: Enable GuC firmware log Dave Gordon
2015-07-24 22:40   ` O'Rourke, Tom
2015-07-09 18:29 ` [PATCH 09/13 v4] drm/i915: Implementation of GuC client Dave Gordon
2015-07-25  2:31   ` O'Rourke, Tom
2015-07-09 18:29 ` [PATCH 10/13 v4] drm/i915: Interrupt routing for GuC submission Dave Gordon
2015-07-27 15:33   ` O'Rourke, Tom
2015-07-28 11:29     ` Dave Gordon
2015-07-09 18:29 ` [PATCH 11/13 v4] drm/i915: Integrate GuC-based command submission Dave Gordon
2015-07-27 15:57   ` O'Rourke, Tom
2015-07-27 19:33     ` Yu Dai
2015-07-28 13:59     ` Dave Gordon
2015-07-28 16:47       ` Yu Dai
2015-07-09 18:29 ` [PATCH 12/13 v4] drm/i915: Debugfs interface for GuC submission statistics Dave Gordon
2015-07-27 15:36   ` O'Rourke, Tom
2015-07-09 18:29 ` [PATCH 13/13 v4] drm/i915: Enable GuC submission, where supported Dave Gordon
2015-07-18  0:45 ` [PATCH 00/13 v4] Batch submission via GuC O'Rourke, Tom

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1436466554-24806-5-git-send-email-david.s.gordon@intel.com \
    --to=david.s.gordon@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.