From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tim Bird Subject: [PATCH v3 2/3] ARM: qcom: Add coincell charger driver Date: Thu, 16 Jul 2015 16:55:32 -0700 Message-ID: <1437090933-1232-2-git-send-email-tim.bird@sonymobile.com> References: <1437090933-1232-1-git-send-email-tim.bird@sonymobile.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1437090933-1232-1-git-send-email-tim.bird@sonymobile.com> Sender: linux-kernel-owner@vger.kernel.org To: arnd@arndb.de, gregkh@linuxfoundation.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, linux-kernel@vger.kernel.org, bjorn.andersson@sonymobile.com List-Id: linux-arm-msm@vger.kernel.org This driver is used to configure the coincell charger found in Qualcomm PMICs. The driver allows configuring the current-limiting resistor for the charger, as well as the voltage to apply to the coincell (or capacitor) when charging. Signed-off-by: Tim Bird --- Changes in v3: - change 'depends on' in Kconfig - remove 'select REGMAP' in Kconfig - put spaces in map lists - use 'bool' type for enable variable - remove some printks - add missing braces in error handling in qcom_coincell_chgr_config - eliminate of_node NULL check in probe routine - rename driver to qcom-spmi-coincell - put struct qcom_coincell on stack, instead of allocating it - return the result of a function directly (in a few places) - reorder operations to avoid partial register update drivers/misc/Kconfig | 10 +++ drivers/misc/Makefile | 1 + drivers/misc/qcom-coincell.c | 152 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 163 insertions(+) create mode 100644 drivers/misc/qcom-coincell.c diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 42c3852..ccccc29 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -271,6 +271,16 @@ config HP_ILO To compile this driver as a module, choose M here: the module will be called hpilo. +config QCOM_COINCELL + tristate "Qualcomm coincell charger support" + depends on MFD_SPMI_PMIC || COMPILE_TEST + help + This driver supports the coincell block found inside of + Qualcomm PMICs. The coincell charger provides a means to + charge a coincell battery or backup capacitor which is used + to maintain PMIC register and RTC state in the absence of + external power. + config SGI_GRU tristate "SGI GRU driver" depends on X86_UV && SMP diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index d056fb7..537d7f3 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o +obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o obj-$(CONFIG_SENSORS_BH1780) += bh1780gli.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o obj-$(CONFIG_SENSORS_APDS990X) += apds990x.o diff --git a/drivers/misc/qcom-coincell.c b/drivers/misc/qcom-coincell.c new file mode 100644 index 0000000..7b4a2da --- /dev/null +++ b/drivers/misc/qcom-coincell.c @@ -0,0 +1,152 @@ +/* Copyright (c) 2013, The Linux Foundation. All rights reserved. + * Copyright (c) 2015, Sony Mobile Communications Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +struct qcom_coincell { + struct device *dev; + struct regmap *regmap; + u32 base_addr; +}; + +#define QCOM_COINCELL_REG_RSET 0x44 +#define QCOM_COINCELL_REG_VSET 0x45 +#define QCOM_COINCELL_REG_ENABLE 0x46 + +#define QCOM_COINCELL_ENABLE BIT(7) + +static const int qcom_rset_map[] = { 2100, 1700, 1200, 800 }; +static const int qcom_vset_map[] = { 2500, 3200, 3100, 3000 }; +/* NOTE: for pm8921 and others, voltage of 2500 is 16 (10000b), not 0 */ + +/* if enable==0, rset and vset are ignored */ +static int qcom_coincell_chgr_config(struct qcom_coincell *chgr, int rset, + int vset, bool enable) +{ + int i, j, rc; + + /* if disabling, just do that and skip other operations */ + if (!enable) + return regmap_write(chgr->regmap, + chgr->base_addr + QCOM_COINCELL_REG_ENABLE, 0); + + /* find index for current-limiting resistor */ + for (i = 0; i < ARRAY_SIZE(qcom_rset_map); i++) + if (rset == qcom_rset_map[i]) + break; + + if (i >= ARRAY_SIZE(qcom_rset_map)) { + dev_err(chgr->dev, "invalid rset-ohms value %d\n", rset); + return -EINVAL; + } + + /* find index for charge voltage */ + for (j = 0; j < ARRAY_SIZE(qcom_vset_map); j++) + if (vset == qcom_vset_map[j]) + break; + + if (j >= ARRAY_SIZE(qcom_vset_map)) { + dev_err(chgr->dev, "invalid vset-millivolts value %d\n", vset); + return -EINVAL; + } + + rc = regmap_write(chgr->regmap, + chgr->base_addr + QCOM_COINCELL_REG_RSET, i); + if (rc) { + /* + * This is mainly to flag a bad base_addr (reg) from dts. + * Other failures writing to the registers should be + * extremely rare, or indicative of problems that + * should be reported elsewhere (eg. spmi failure). + */ + dev_err(chgr->dev, "could not write to RSET register\n"); + return rc; + } + + rc = regmap_write(chgr->regmap, + chgr->base_addr + QCOM_COINCELL_REG_VSET, j); + if (rc) + return rc; + + /* set 'enable' register */ + return regmap_write(chgr->regmap, + chgr->base_addr + QCOM_COINCELL_REG_ENABLE, + QCOM_COINCELL_ENABLE); +} + +static int qcom_coincell_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct qcom_coincell chgr; + u32 rset, vset; + bool enable; + int rc; + + chgr.dev = &pdev->dev; + + chgr.regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!chgr.regmap) { + dev_err(chgr.dev, "Unable to get regmap\n"); + return -EINVAL; + } + + rc = of_property_read_u32(node, "reg", &chgr.base_addr); + if (rc) + return rc; + + enable = !of_property_read_bool(node, "qcom,charger-disable"); + + if (enable) { + rc = of_property_read_u32(node, "qcom,rset-ohms", &rset); + if (rc) { + dev_err(chgr.dev, + "can't find 'qcom,rset-ohms' in DT block"); + return rc; + } + + rc = of_property_read_u32(node, "qcom,vset-millivolts", &vset); + if (rc) { + dev_err(chgr.dev, + "can't find 'qcom,vset-millivolts' in DT block"); + return rc; + } + } + + return qcom_coincell_chgr_config(&chgr, rset, vset, enable); +} + +static const struct of_device_id qcom_coincell_match_table[] = { + { .compatible = "qcom,pm8941-coincell", }, + {} +}; + +MODULE_DEVICE_TABLE(of, qcom_coincell_match_table); + +static struct platform_driver qcom_coincell_driver = { + .driver = { + .name = "qcom-spmi-coincell", + .of_match_table = qcom_coincell_match_table, + }, + .probe = qcom_coincell_probe, +}; + +module_platform_driver(qcom_coincell_driver); + +MODULE_DESCRIPTION("Qualcomm PMIC coincell charger driver"); +MODULE_LICENSE("GPL v2"); -- 1.8.2.2 From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756443AbbGPXzp (ORCPT ); Thu, 16 Jul 2015 19:55:45 -0400 Received: from seldrel01.sonyericsson.com ([37.139.156.2]:14150 "EHLO seldrel01.sonyericsson.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756149AbbGPXzm (ORCPT ); Thu, 16 Jul 2015 19:55:42 -0400 From: Tim Bird To: , , , CC: , , , , , Subject: [PATCH v3 2/3] ARM: qcom: Add coincell charger driver Date: Thu, 16 Jul 2015 16:55:32 -0700 Message-ID: <1437090933-1232-2-git-send-email-tim.bird@sonymobile.com> X-Mailer: git-send-email 1.8.2.2 In-Reply-To: <1437090933-1232-1-git-send-email-tim.bird@sonymobile.com> References: <1437090933-1232-1-git-send-email-tim.bird@sonymobile.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This driver is used to configure the coincell charger found in Qualcomm PMICs. The driver allows configuring the current-limiting resistor for the charger, as well as the voltage to apply to the coincell (or capacitor) when charging. Signed-off-by: Tim Bird --- Changes in v3: - change 'depends on' in Kconfig - remove 'select REGMAP' in Kconfig - put spaces in map lists - use 'bool' type for enable variable - remove some printks - add missing braces in error handling in qcom_coincell_chgr_config - eliminate of_node NULL check in probe routine - rename driver to qcom-spmi-coincell - put struct qcom_coincell on stack, instead of allocating it - return the result of a function directly (in a few places) - reorder operations to avoid partial register update drivers/misc/Kconfig | 10 +++ drivers/misc/Makefile | 1 + drivers/misc/qcom-coincell.c | 152 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 163 insertions(+) create mode 100644 drivers/misc/qcom-coincell.c diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 42c3852..ccccc29 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -271,6 +271,16 @@ config HP_ILO To compile this driver as a module, choose M here: the module will be called hpilo. +config QCOM_COINCELL + tristate "Qualcomm coincell charger support" + depends on MFD_SPMI_PMIC || COMPILE_TEST + help + This driver supports the coincell block found inside of + Qualcomm PMICs. The coincell charger provides a means to + charge a coincell battery or backup capacitor which is used + to maintain PMIC register and RTC state in the absence of + external power. + config SGI_GRU tristate "SGI GRU driver" depends on X86_UV && SMP diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index d056fb7..537d7f3 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o +obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o obj-$(CONFIG_SENSORS_BH1780) += bh1780gli.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o obj-$(CONFIG_SENSORS_APDS990X) += apds990x.o diff --git a/drivers/misc/qcom-coincell.c b/drivers/misc/qcom-coincell.c new file mode 100644 index 0000000..7b4a2da --- /dev/null +++ b/drivers/misc/qcom-coincell.c @@ -0,0 +1,152 @@ +/* Copyright (c) 2013, The Linux Foundation. All rights reserved. + * Copyright (c) 2015, Sony Mobile Communications Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +struct qcom_coincell { + struct device *dev; + struct regmap *regmap; + u32 base_addr; +}; + +#define QCOM_COINCELL_REG_RSET 0x44 +#define QCOM_COINCELL_REG_VSET 0x45 +#define QCOM_COINCELL_REG_ENABLE 0x46 + +#define QCOM_COINCELL_ENABLE BIT(7) + +static const int qcom_rset_map[] = { 2100, 1700, 1200, 800 }; +static const int qcom_vset_map[] = { 2500, 3200, 3100, 3000 }; +/* NOTE: for pm8921 and others, voltage of 2500 is 16 (10000b), not 0 */ + +/* if enable==0, rset and vset are ignored */ +static int qcom_coincell_chgr_config(struct qcom_coincell *chgr, int rset, + int vset, bool enable) +{ + int i, j, rc; + + /* if disabling, just do that and skip other operations */ + if (!enable) + return regmap_write(chgr->regmap, + chgr->base_addr + QCOM_COINCELL_REG_ENABLE, 0); + + /* find index for current-limiting resistor */ + for (i = 0; i < ARRAY_SIZE(qcom_rset_map); i++) + if (rset == qcom_rset_map[i]) + break; + + if (i >= ARRAY_SIZE(qcom_rset_map)) { + dev_err(chgr->dev, "invalid rset-ohms value %d\n", rset); + return -EINVAL; + } + + /* find index for charge voltage */ + for (j = 0; j < ARRAY_SIZE(qcom_vset_map); j++) + if (vset == qcom_vset_map[j]) + break; + + if (j >= ARRAY_SIZE(qcom_vset_map)) { + dev_err(chgr->dev, "invalid vset-millivolts value %d\n", vset); + return -EINVAL; + } + + rc = regmap_write(chgr->regmap, + chgr->base_addr + QCOM_COINCELL_REG_RSET, i); + if (rc) { + /* + * This is mainly to flag a bad base_addr (reg) from dts. + * Other failures writing to the registers should be + * extremely rare, or indicative of problems that + * should be reported elsewhere (eg. spmi failure). + */ + dev_err(chgr->dev, "could not write to RSET register\n"); + return rc; + } + + rc = regmap_write(chgr->regmap, + chgr->base_addr + QCOM_COINCELL_REG_VSET, j); + if (rc) + return rc; + + /* set 'enable' register */ + return regmap_write(chgr->regmap, + chgr->base_addr + QCOM_COINCELL_REG_ENABLE, + QCOM_COINCELL_ENABLE); +} + +static int qcom_coincell_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct qcom_coincell chgr; + u32 rset, vset; + bool enable; + int rc; + + chgr.dev = &pdev->dev; + + chgr.regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!chgr.regmap) { + dev_err(chgr.dev, "Unable to get regmap\n"); + return -EINVAL; + } + + rc = of_property_read_u32(node, "reg", &chgr.base_addr); + if (rc) + return rc; + + enable = !of_property_read_bool(node, "qcom,charger-disable"); + + if (enable) { + rc = of_property_read_u32(node, "qcom,rset-ohms", &rset); + if (rc) { + dev_err(chgr.dev, + "can't find 'qcom,rset-ohms' in DT block"); + return rc; + } + + rc = of_property_read_u32(node, "qcom,vset-millivolts", &vset); + if (rc) { + dev_err(chgr.dev, + "can't find 'qcom,vset-millivolts' in DT block"); + return rc; + } + } + + return qcom_coincell_chgr_config(&chgr, rset, vset, enable); +} + +static const struct of_device_id qcom_coincell_match_table[] = { + { .compatible = "qcom,pm8941-coincell", }, + {} +}; + +MODULE_DEVICE_TABLE(of, qcom_coincell_match_table); + +static struct platform_driver qcom_coincell_driver = { + .driver = { + .name = "qcom-spmi-coincell", + .of_match_table = qcom_coincell_match_table, + }, + .probe = qcom_coincell_probe, +}; + +module_platform_driver(qcom_coincell_driver); + +MODULE_DESCRIPTION("Qualcomm PMIC coincell charger driver"); +MODULE_LICENSE("GPL v2"); -- 1.8.2.2