All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 20/23] qcow2: Make size_to_clusters() return uint64_t
Date: Fri, 11 Sep 2015 21:41:00 +0200	[thread overview]
Message-ID: <1442000463-22777-21-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1442000463-22777-1-git-send-email-kwolf@redhat.com>

From: Max Reitz <mreitz@redhat.com>

Sadly, some images may have more clusters than what can be represented
using a plain int. We should be prepared for that case (in
qcow2_check_refcounts() we actually were trying to catch that case, but
since size_to_clusters() truncated the returned value, that check never
did anything useful).

Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block/qcow2-cluster.c  | 28 ++++++++++++++++++----------
 block/qcow2-refcount.c | 10 +++++++---
 block/qcow2.h          |  6 +++---
 3 files changed, 28 insertions(+), 16 deletions(-)

diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index 412ee27..6ede629 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -298,7 +298,7 @@ fail:
  * as contiguous. (This allows it, for example, to stop at the first compressed
  * cluster which may require a different handling)
  */
-static int count_contiguous_clusters(uint64_t nb_clusters, int cluster_size,
+static int count_contiguous_clusters(int nb_clusters, int cluster_size,
         uint64_t *l2_table, uint64_t stop_flags)
 {
     int i;
@@ -321,7 +321,7 @@ static int count_contiguous_clusters(uint64_t nb_clusters, int cluster_size,
 	return i;
 }
 
-static int count_contiguous_free_clusters(uint64_t nb_clusters, uint64_t *l2_table)
+static int count_contiguous_free_clusters(int nb_clusters, uint64_t *l2_table)
 {
     int i;
 
@@ -495,6 +495,7 @@ int qcow2_get_cluster_offset(BlockDriverState *bs, uint64_t offset,
     if (nb_needed > nb_available) {
         nb_needed = nb_available;
     }
+    assert(nb_needed <= INT_MAX);
 
     *cluster_offset = 0;
 
@@ -530,6 +531,8 @@ int qcow2_get_cluster_offset(BlockDriverState *bs, uint64_t offset,
 
     l2_index = (offset >> s->cluster_bits) & (s->l2_size - 1);
     *cluster_offset = be64_to_cpu(l2_table[l2_index]);
+
+    /* nb_needed <= INT_MAX, thus nb_clusters <= INT_MAX, too */
     nb_clusters = size_to_clusters(s, nb_needed << 9);
 
     ret = qcow2_get_cluster_type(*cluster_offset);
@@ -960,7 +963,7 @@ static int handle_copied(BlockDriverState *bs, uint64_t guest_offset,
     int l2_index;
     uint64_t cluster_offset;
     uint64_t *l2_table;
-    unsigned int nb_clusters;
+    uint64_t nb_clusters;
     unsigned int keep_clusters;
     int ret;
 
@@ -979,6 +982,7 @@ static int handle_copied(BlockDriverState *bs, uint64_t guest_offset,
 
     l2_index = offset_to_l2_index(s, guest_offset);
     nb_clusters = MIN(nb_clusters, s->l2_size - l2_index);
+    assert(nb_clusters <= INT_MAX);
 
     /* Find L2 entry for the first involved cluster */
     ret = get_cluster_table(bs, guest_offset, &l2_table, &l2_index);
@@ -1061,7 +1065,7 @@ out:
  * restarted, but the whole request should not be failed.
  */
 static int do_alloc_cluster_offset(BlockDriverState *bs, uint64_t guest_offset,
-    uint64_t *host_offset, unsigned int *nb_clusters)
+                                   uint64_t *host_offset, uint64_t *nb_clusters)
 {
     BDRVQcow2State *s = bs->opaque;
 
@@ -1079,7 +1083,7 @@ static int do_alloc_cluster_offset(BlockDriverState *bs, uint64_t guest_offset,
         *host_offset = cluster_offset;
         return 0;
     } else {
-        int ret = qcow2_alloc_clusters_at(bs, *host_offset, *nb_clusters);
+        int64_t ret = qcow2_alloc_clusters_at(bs, *host_offset, *nb_clusters);
         if (ret < 0) {
             return ret;
         }
@@ -1115,7 +1119,7 @@ static int handle_alloc(BlockDriverState *bs, uint64_t guest_offset,
     int l2_index;
     uint64_t *l2_table;
     uint64_t entry;
-    unsigned int nb_clusters;
+    uint64_t nb_clusters;
     int ret;
 
     uint64_t alloc_cluster_offset;
@@ -1133,6 +1137,7 @@ static int handle_alloc(BlockDriverState *bs, uint64_t guest_offset,
 
     l2_index = offset_to_l2_index(s, guest_offset);
     nb_clusters = MIN(nb_clusters, s->l2_size - l2_index);
+    assert(nb_clusters <= INT_MAX);
 
     /* Find L2 entry for the first involved cluster */
     ret = get_cluster_table(bs, guest_offset, &l2_table, &l2_index);
@@ -1426,7 +1431,8 @@ int qcow2_decompress_cluster(BlockDriverState *bs, uint64_t cluster_offset)
  * clusters.
  */
 static int discard_single_l2(BlockDriverState *bs, uint64_t offset,
-    unsigned int nb_clusters, enum qcow2_discard_type type, bool full_discard)
+                             uint64_t nb_clusters, enum qcow2_discard_type type,
+                             bool full_discard)
 {
     BDRVQcow2State *s = bs->opaque;
     uint64_t *l2_table;
@@ -1441,6 +1447,7 @@ static int discard_single_l2(BlockDriverState *bs, uint64_t offset,
 
     /* Limit nb_clusters to one L2 table */
     nb_clusters = MIN(nb_clusters, s->l2_size - l2_index);
+    assert(nb_clusters <= INT_MAX);
 
     for (i = 0; i < nb_clusters; i++) {
         uint64_t old_l2_entry;
@@ -1503,7 +1510,7 @@ int qcow2_discard_clusters(BlockDriverState *bs, uint64_t offset,
 {
     BDRVQcow2State *s = bs->opaque;
     uint64_t end_offset;
-    unsigned int nb_clusters;
+    uint64_t nb_clusters;
     int ret;
 
     end_offset = offset + (nb_sectors << BDRV_SECTOR_BITS);
@@ -1545,7 +1552,7 @@ fail:
  * clusters.
  */
 static int zero_single_l2(BlockDriverState *bs, uint64_t offset,
-    unsigned int nb_clusters)
+                          uint64_t nb_clusters)
 {
     BDRVQcow2State *s = bs->opaque;
     uint64_t *l2_table;
@@ -1560,6 +1567,7 @@ static int zero_single_l2(BlockDriverState *bs, uint64_t offset,
 
     /* Limit nb_clusters to one L2 table */
     nb_clusters = MIN(nb_clusters, s->l2_size - l2_index);
+    assert(nb_clusters <= INT_MAX);
 
     for (i = 0; i < nb_clusters; i++) {
         uint64_t old_offset;
@@ -1584,7 +1592,7 @@ static int zero_single_l2(BlockDriverState *bs, uint64_t offset,
 int qcow2_zero_clusters(BlockDriverState *bs, uint64_t offset, int nb_sectors)
 {
     BDRVQcow2State *s = bs->opaque;
-    unsigned int nb_clusters;
+    uint64_t nb_clusters;
     int ret;
 
     /* The zero flag is only supported by version 3 and newer */
diff --git a/block/qcow2-refcount.c b/block/qcow2-refcount.c
index b780bb9..5f67798 100644
--- a/block/qcow2-refcount.c
+++ b/block/qcow2-refcount.c
@@ -875,8 +875,8 @@ int64_t qcow2_alloc_clusters(BlockDriverState *bs, uint64_t size)
     return offset;
 }
 
-int qcow2_alloc_clusters_at(BlockDriverState *bs, uint64_t offset,
-    int nb_clusters)
+int64_t qcow2_alloc_clusters_at(BlockDriverState *bs, uint64_t offset,
+                                int64_t nb_clusters)
 {
     BDRVQcow2State *s = bs->opaque;
     uint64_t cluster_index, refcount;
@@ -1259,7 +1259,7 @@ static size_t refcount_array_byte_size(BDRVQcow2State *s, uint64_t entries)
 static int realloc_refcount_array(BDRVQcow2State *s, void **array,
                                   int64_t *size, int64_t new_size)
 {
-    size_t old_byte_size, new_byte_size;
+    int64_t old_byte_size, new_byte_size;
     void *new_ptr;
 
     /* Round to clusters so the array can be directly written to disk */
@@ -1275,6 +1275,10 @@ static int realloc_refcount_array(BDRVQcow2State *s, void **array,
 
     assert(new_byte_size > 0);
 
+    if (new_byte_size > SIZE_MAX) {
+        return -ENOMEM;
+    }
+
     new_ptr = g_try_realloc(*array, new_byte_size);
     if (!new_ptr) {
         return -ENOMEM;
diff --git a/block/qcow2.h b/block/qcow2.h
index 61f1b57..d700bf1 100644
--- a/block/qcow2.h
+++ b/block/qcow2.h
@@ -415,7 +415,7 @@ static inline int64_t offset_into_cluster(BDRVQcow2State *s, int64_t offset)
     return offset & (s->cluster_size - 1);
 }
 
-static inline int size_to_clusters(BDRVQcow2State *s, int64_t size)
+static inline uint64_t size_to_clusters(BDRVQcow2State *s, uint64_t size)
 {
     return (size + (s->cluster_size - 1)) >> s->cluster_bits;
 }
@@ -509,8 +509,8 @@ int qcow2_update_cluster_refcount(BlockDriverState *bs, int64_t cluster_index,
                                   enum qcow2_discard_type type);
 
 int64_t qcow2_alloc_clusters(BlockDriverState *bs, uint64_t size);
-int qcow2_alloc_clusters_at(BlockDriverState *bs, uint64_t offset,
-    int nb_clusters);
+int64_t qcow2_alloc_clusters_at(BlockDriverState *bs, uint64_t offset,
+                                int64_t nb_clusters);
 int64_t qcow2_alloc_bytes(BlockDriverState *bs, int size);
 void qcow2_free_clusters(BlockDriverState *bs,
                           int64_t offset, int64_t size,
-- 
1.8.3.1

  parent reply	other threads:[~2015-09-11 19:48 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-11 19:40 [Qemu-devel] [PULL 00/23] Block layer patches Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 01/23] block: Always pass NULL as drv for bdrv_open() Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 02/23] block: Drop drv parameter from bdrv_open() Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 03/23] block: Drop drv parameter from bdrv_open_inherit() Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 04/23] block: Drop drv parameter from bdrv_fill_options() Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 05/23] block: Drop bdrv_find_whitelisted_format() Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 06/23] qcow2: Rename BDRVQcowState to BDRVQcow2State Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 07/23] block: Allow specifying driver-specific options to reopen Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 08/23] qemu-io: Remove duplicate 'open' error message Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 09/23] qemu-io: Add command 'reopen' Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 10/23] qcow2: Improve error message Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 11/23] qcow2: Factor out qcow2_update_options() Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 12/23] qcow2: Move qcow2_update_options() call up Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 13/23] qcow2: Move rest of option handling to qcow2_update_options() Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 14/23] qcow2: Leave s unchanged on qcow2_update_options() failure Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 15/23] qcow2: Fix memory leak in qcow2_update_options() error path Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 16/23] qcow2: Make qcow2_update_options() suitable for transactions Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 17/23] qcow2: Support updating driver-specific options in reopen Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 18/23] qemu-iotests: Reopen qcow2 with lazy-refcounts change Kevin Wolf
2015-09-11 19:40 ` [Qemu-devel] [PULL 19/23] qemu-iotests: More qcow2 reopen tests Kevin Wolf
2015-09-11 19:41 ` Kevin Wolf [this message]
2015-09-11 19:41 ` [Qemu-devel] [PULL 21/23] iotests: Add test for checking large image files Kevin Wolf
2015-09-11 19:41 ` [Qemu-devel] [PULL 22/23] vmdk: Fix next_cluster_sector for compressed write Kevin Wolf
2015-09-11 19:41 ` [Qemu-devel] [PULL 23/23] qcow2: Make qcow2_alloc_bytes() more explicit Kevin Wolf
2015-09-14  9:46 ` [Qemu-devel] [PULL 00/23] Block layer patches Peter Maydell
2015-09-14  9:57   ` Kevin Wolf
2015-09-14 14:36     ` Max Reitz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1442000463-22777-21-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.