[U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds

[Alexey Brodkin <Alexey.Brodkin@synopsys.com>]

Hi Marek, Lukasz,

On Sun, 2015-09-13 at 16:00 +0200, Marek Vasut wrote:
> On Sunday, September 13, 2015 at 12:03:18 PM, Lukasz Majewski wrote:
> > Hi Marek,
> 
> Hi,
> 
> [...]

> 
> > > > > Still we need to fix regression first with virtually infinite
> > > > > timeout :) I would even thing that simple revert of Marek's patch
> > > > > may make sense for now.
> > > > 
> > > > +1 - unfortunately there were some other patches applied to this
> > > > particular patch. Simple revert might be a bit tricky here.
> > > 
> > > -1 - In case the card gets removed during the DMA transfer and the
> > > board doesn't have a watchdog, it will get stuck indefinitelly.
> > 
> > I'm just wondering here - why the indefinite loop was working
> > previously? Was anybody complaining (on the ML) about the problem of
> > removing the SD card when some operation is ongoing?
> 
> It worked for me for all the workloads I used. Noone was complaining.

The same story here - previous code with infinite loop was working for
my boards. And now I do see a problem with pretty simple scenario that
we do use in our products.

> > The problem with potential removal of SD card (after booting the board)
> > is with us for quite long time. Even with indefinite loop (without your
> > patch) we also could "hang" the board if the SD card was removed
> > during a transfer.
> 
> Which is why we should weed out the unbounded loops.
> 
> > > We
> > > absolutelly don't want this sort of behavior in U-Boot. I understand
> > > that this is the easiest way for everyone to achieve some sort of
> > > "working" solution, but it is definitelly not the correct one. While
> > > I do agree to increasing the timeout, I do not agree to unbounded
> > > loops, sorry.
> > 
> > We have agreed to not agree :-)
> 
> Yes :-)

The first thing I care is working U-Boot v2015.10 out of the box on my
boards. And so I may agree on any temporary solution. I see it as timeout
value either being infinite or obviously very high like 60 seconds.

60 seconds might sound stupid but my thought behind this is to make sure
even long transfers succeed. Imagine 100 Mb rootfs or update file downloaded
from slow SD-card.

> > > > > From both points of view for keeping history
> > > > > clean (compared to stacked fixes/workarounds) and from removal of
> > > > > regression root cause.
> > > > 
> > > > As I said before - +1 from me.
> > > 
> > > As I said before, -1 from me. Btw. did anything regress in here? To
> > > me, this seems like a newly discovered bug ...
> > 
> > Yes, this is a bug. We had similar problem with Samsung's SDHCI, before
> > we switched to dw_mmc. This issue is new at dw_mmc.
> > 
> > > > > It's not that I like to have infinite loops but given previous
> > > > > implementation worked fine for people in the previous U-Boot
> > > > > release.
> > > > 
> > > > Good justification
> > > 
> > > It is never a justified to return to a potentially problematic version
> > 
> > IMHO revering the change (before the release) is from the software
> > development point of view better solution than adding some
> > heuristic delta to timeout.
> > 
> > > for the sake of getting some sort of crappy hardware operational.
> > 
> > Unfortunately this "crappy hardware" is pervasive and we cannot do
> > anything about it.
> > 
> > To sum up (my point of view):
> > 1. The best would be to revert the patch - but if simple "git revert" is
> > not working then,

Well even if clean revert won't work we may do manual tweaks so that
functionally it is "revert". If of any interest I may come up with that
sort of patch.

> > 2. We should increase the timeout (with my patch) for v2015.10 release

If everybody is OK with that let's go do it. Because release is around the
corner and I don't want to explain each and every user how to fix their
new problem.

> Let's do this for the sake of crappy cards.
> 
> > 3. After release we can devise some kind of solution
> > 4. It is a good topic for U-boot's minisummit discussion at Dublin
> > 
> > Marek, Alexey, Tom, Pantelis what do you think?
> 
> I think yes.

What's important we need to make sure Tom is aware of this situation and
he won't cut a release until our fix is in place and all involved parties
reported their happiness.

-Alexey