From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from eggs.gnu.org ([2001:4830:134:3::10]:36017) by lists.gnu.org with esmtp (Exim 4.71) (envelope-from ) id 1ZotYT-0001Em-UR for qemu-devel@nongnu.org; Wed, 21 Oct 2015 09:35:52 -0400 Received: from Debian-exim by eggs.gnu.org with spam-scanned (Exim 4.71) (envelope-from ) id 1ZotYQ-00052h-DT for qemu-devel@nongnu.org; Wed, 21 Oct 2015 09:35:49 -0400 Received: from mx1.redhat.com ([209.132.183.28]:50094) by eggs.gnu.org with esmtp (Exim 4.71) (envelope-from ) id 1ZotYQ-00052a-0Z for qemu-devel@nongnu.org; Wed, 21 Oct 2015 09:35:46 -0400 From: Prasanna Kumar Kalever Date: Wed, 21 Oct 2015 19:04:11 +0530 Message-Id: <1445434451-3439-3-git-send-email-prasanna.kalever@redhat.com> In-Reply-To: <1445434451-3439-1-git-send-email-prasanna.kalever@redhat.com> References: <1445434451-3439-1-git-send-email-prasanna.kalever@redhat.com> Subject: [Qemu-devel] [PATCH v9 3/3] block/gluster: add support for multiple gluster servers List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: qemu-devel@nongnu.org Cc: kwolf@redhat.com, pkrempa@redhat.com, stefanha@gmail.com, deepakcs@redhat.com, bharata@linux.vnet.ibm.com, rtalur@redhat.com, Prasanna Kumar Kalever This patch adds a way to specify multiple volfile servers to the gluster block backend of QEMU with tcp|rdma transport types and their port numbers. Problem: Currenly VM Image on gluster volume is specified like this: file=gluster[+tcp]://host[:port]/testvol/a.img Assuming we have three hosts in trusted pool with replica 3 volume in action and unfortunately host (mentioned in the command above) went down for some reason, since the volume is replica 3 we now have other 2 hosts active from which we can boot the VM. But currently there is no mechanism to pass the other 2 gluster host addresses to qemu. Solution: New way of specifying VM Image on gluster volume with volfile servers: (We still support old syntax to maintain backward compatibility) Basic command line syntax looks like: Pattern I: -drive driver=gluster, volume=testvol,path=/path/a.raw, servers.0.host=1.2.3.4, [servers.0.port=24007,] [servers.0.transport=tcp,] servers.1.host=5.6.7.8, [servers.1.port=24008,] [servers.1.transport=rdma,] ... Pattern II: 'json:{"driver":"qcow2","file":{"driver":"gluster", "volume":"testvol","path":"/path/a.qcow2", "servers":[{tuple0},{tuple1}, ...{tupleN}]}}' driver => 'gluster' (protocol name) volume => name of gluster volume where our VM image resides path => absolute path of image in gluster volume {tuple} => {"host":"1.2.3.4"[,"port":"24007","transport":"tcp"]} host => host address (hostname/ipv4/ipv6 addresses) port => port number on which glusterd is listening. (default 24007) transport => transport type used to connect to gluster management daemon, it can be tcp|rdma (default 'tcp') Examples: 1. -drive driver=qcow2,file.driver=gluster, file.volume=testvol,file.path=/path/a.qcow2, file.servers.0.host=1.2.3.4, file.servers.0.port=24007, file.servers.0.transport=tcp, file.servers.1.host=5.6.7.8, file.servers.1.port=24008, file.servers.1.transport=rdma 2. 'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol", "path":"/path/a.qcow2","servers": [{"host":"1.2.3.4","port":"24007","transport":"tcp"}, {"host":"4.5.6.7","port":"24008","transport":"rdma"}] } }' This patch gives a mechanism to provide all the server addresses, which are in replica set, so in case host1 is down VM can still boot from any of the active hosts. This is equivalent to the backup-volfile-servers option supported by mount.glusterfs (FUSE way of mounting gluster volume) This patch depends on a recent fix in libgfapi raised as part of this work: http://review.gluster.org/#/c/12114/ Credits: Sincere thanks to Kevin Wolf and "Deepak C Shetty" for inputs and all their support Signed-off-by: Prasanna Kumar Kalever v1: multiple host addresses but common port number and transport type pattern: URI syntax with query (?) delimitor syntax: file=gluster[+transport-type]://host1:24007/testvol/a.img\ ?servers=host2&servers=host3 v2: multiple host addresses each have their own port number, but all use common transport type pattern: URI syntax with query (?) delimiter syntax: file=gluster[+transport-type]://[host[:port]]/testvol/a.img\ [?servers=host1[:port]\ &servers=host2[:port]] v3: multiple host addresses each have their own port number and transport type pattern: changed to json syntax: 'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol", "path":"/path/a.qcow2","servers": [{"host":"1.2.3.4","port":"24007","transport":"tcp"}, {"host":"4.5.6.7","port":"24008","transport":"rdma"}] } }' v4, v5: address comments from "Eric Blake" renamed: 'backup-volfile-servers' -> 'volfile-servers' v6: address comments from Peter Krempa renamed: 'volname' -> 'volume' 'image-path' -> 'path' 'server' -> 'host' v7: fix for v6 (initialize num_servers to 1 and other typos) v8: split patch set v7 into series of 3 as per Peter Krempa review comments v9: reorder the series of patches addressing "Eric Blake" review comments --- block/gluster.c | 420 +++++++++++++++++++++++++++++++++++++++++++++------ qapi/block-core.json | 62 +++++++- 2 files changed, 433 insertions(+), 49 deletions(-) diff --git a/block/gluster.c b/block/gluster.c index ededda2..62b6656 100644 --- a/block/gluster.c +++ b/block/gluster.c @@ -11,6 +11,16 @@ #include "block/block_int.h" #include "qemu/uri.h" +#define GLUSTER_OPT_FILENAME "filename" +#define GLUSTER_OPT_VOLUME "volume" +#define GLUSTER_OPT_PATH "path" +#define GLUSTER_OPT_HOST "host" +#define GLUSTER_OPT_PORT "port" +#define GLUSTER_OPT_TRANSPORT "transport" +#define GLUSTER_OPT_SERVERS_PATTERN "servers." + +#define GLUSTER_DEFAULT_PORT 24007 + typedef struct GlusterAIOCB { int64_t size; int ret; @@ -29,12 +39,16 @@ typedef struct BDRVGlusterReopenState { struct glfs_fd *fd; } BDRVGlusterReopenState; -typedef struct GlusterConf { +typedef struct GlusterServerConf { char *host; int port; + char *transport; +} GlusterServerConf; + +typedef struct GlusterConf { char *volume; char *path; - char *transport; + GlusterServerConf *gsconf; } GlusterConf; @@ -61,7 +75,7 @@ static QemuOptsList runtime_opts = { .head = QTAILQ_HEAD_INITIALIZER(runtime_opts.head), .desc = { { - .name = "filename", + .name = GLUSTER_OPT_FILENAME, .type = QEMU_OPT_STRING, .help = "URL to the gluster image", }, @@ -69,14 +83,58 @@ static QemuOptsList runtime_opts = { }, }; +static QemuOptsList runtime_json_opts = { + .name = "gluster_json", + .head = QTAILQ_HEAD_INITIALIZER(runtime_json_opts.head), + .desc = { + { + .name = GLUSTER_OPT_VOLUME, + .type = QEMU_OPT_STRING, + .help = "name of gluster volume where VM image resides", + }, + { + .name = GLUSTER_OPT_PATH, + .type = QEMU_OPT_STRING, + .help = "absolute path to image file in gluster volume", + }, + { /* end of list */ } + }, +}; + +static QemuOptsList runtime_tuple_opts = { + .name = "gluster_tuple", + .head = QTAILQ_HEAD_INITIALIZER(runtime_tuple_opts.head), + .desc = { + { + .name = GLUSTER_OPT_HOST, + .type = QEMU_OPT_STRING, + .help = "host address (hostname/ipv4/ipv6 addresses)", + }, + { + .name = GLUSTER_OPT_PORT, + .type = QEMU_OPT_NUMBER, + .help = "port number on which glusterd listen (default 24007)", + }, + { + .name = GLUSTER_OPT_TRANSPORT, + .type = QEMU_OPT_STRING, + .help = "transport type 'tcp' or 'rdma' (default 'tcp')", + }, + { /* end of list */ } + }, +}; + static void qemu_gluster_gconf_free(GlusterConf *gconf) { if (gconf) { - g_free(gconf->host); g_free(gconf->volume); g_free(gconf->path); - g_free(gconf->transport); + if (gconf->gsconf) { + g_free(gconf->gsconf[0].host); + g_free(gconf->gsconf[0].transport); + g_free(gconf->gsconf); + } g_free(gconf); } } @@ -143,8 +201,9 @@ static int parse_volume_options(GlusterConf *gconf, char *path) * file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket * file=gluster+rdma://1.2.3.4:24007/testvol/a.img */ -static int qemu_gluster_parseuri(GlusterConf *gconf, const char *filename) +static int qemu_gluster_parseuri(GlusterConf **pgconf, const char *filename) { + GlusterConf *gconf; URI *uri; QueryParams *qp = NULL; bool is_unix = false; @@ -155,16 +214,19 @@ static int qemu_gluster_parseuri(GlusterConf *gconf, const char *filename) return -EINVAL; } + gconf = g_new0(GlusterConf, 1); + gconf->gsconf = g_new0(GlusterServerConf, 1); + /* transport */ if (!uri->scheme || !strcmp(uri->scheme, "gluster")) { - gconf->transport = g_strdup("tcp"); + gconf->gsconf[0].transport = g_strdup("tcp"); } else if (!strcmp(uri->scheme, "gluster+tcp")) { - gconf->transport = g_strdup("tcp"); + gconf->gsconf[0].transport = g_strdup("tcp"); } else if (!strcmp(uri->scheme, "gluster+unix")) { - gconf->transport = g_strdup("unix"); + gconf->gsconf[0].transport = g_strdup("unix"); is_unix = true; } else if (!strcmp(uri->scheme, "gluster+rdma")) { - gconf->transport = g_strdup("rdma"); + gconf->gsconf[0].transport = g_strdup("rdma"); } else { ret = -EINVAL; goto out; @@ -190,13 +252,22 @@ static int qemu_gluster_parseuri(GlusterConf *gconf, const char *filename) ret = -EINVAL; goto out; } - gconf->host = g_strdup(qp->p[0].value); + gconf->gsconf[0].host = g_strdup(qp->p[0].value); } else { - gconf->host = g_strdup(uri->server ? uri->server : "localhost"); - gconf->port = uri->port; + gconf->gsconf[0].host = g_strdup(uri->server ? uri->server : "localhost"); + if (uri->port) { + gconf->gsconf[0].port = uri->port; + } else { + gconf->gsconf[0].port = GLUSTER_DEFAULT_PORT; + } } + *pgconf = gconf; + out: + if (ret < 0) { + qemu_gluster_gconf_free(gconf); + } if (qp) { query_params_free(qp); } @@ -204,30 +275,26 @@ out: return ret; } -static struct glfs *qemu_gluster_init(GlusterConf *gconf, const char *filename, - Error **errp) +static struct glfs *qemu_gluster_glfs_init(GlusterConf *gconf, int num_servers, + Error **errp) { struct glfs *glfs = NULL; int ret; int old_errno; - - ret = qemu_gluster_parseuri(gconf, filename); - if (ret < 0) { - error_setg(errp, "Usage: file=gluster[+transport]://[host[:port]]/" - "volume/path[?socket=...]"); - errno = -ret; - goto out; - } + int i; glfs = glfs_new(gconf->volume); if (!glfs) { goto out; } - ret = glfs_set_volfile_server(glfs, gconf->transport, gconf->host, - gconf->port); - if (ret < 0) { - goto out; + for (i = 0; i < num_servers; i++) { + ret = glfs_set_volfile_server(glfs, gconf->gsconf[i].transport, + gconf->gsconf[i].host, + gconf->gsconf[i].port); + if (ret < 0) { + goto out; + } } /* @@ -242,10 +309,9 @@ static struct glfs *qemu_gluster_init(GlusterConf *gconf, const char *filename, ret = glfs_init(glfs); if (ret) { error_setg_errno(errp, errno, - "Gluster connection failed for host=%s port=%d " - "volume=%s path=%s transport=%s", gconf->host, - gconf->port, gconf->volume, gconf->path, - gconf->transport); + "Error: Gluster connection failed for given hosts " + "volume:'%s' path:'%s' host1: %s", gconf->volume, + gconf->path, gconf->gsconf[0].host); /* glfs_init sometimes doesn't set errno although docs suggest that */ if (errno == 0) @@ -264,6 +330,275 @@ out: return NULL; } +static int parse_transport_option(const char *opt) +{ + int i; + + if (!opt) { + /* Set tcp as default */ + return GLUSTER_TRANSPORT_TCP; + } + + for (i = 0; i < GLUSTER_TRANSPORT_MAX; i++) { + if (!strcmp(opt, GlusterTransport_lookup[i])) { + return i; + } + } + + return -EINVAL; +} + +/* +* +* Basic command line syntax looks like: +* +* Pattern I: +* -drive driver=gluster, +* volume=testvol,file.path=/path/a.raw, +* servers.0.host=1.2.3.4, +* [servers.0.port=24007,] +* [servers.0.transport=tcp,] +* servers.1.host=5.6.7.8, +* [servers.1.port=24008,] +* [servers.1.transport=rdma,] ... +* +* Pattern II: +* 'json:{"driver":"qcow2","file":{"driver":"gluster", +* "volume":"testvol","path":"/path/a.qcow2", +* "servers":[{tuple0},{tuple1}, ...{tupleN}]}}' +* +* +* driver => 'gluster' (protocol name) +* volume => name of gluster volume where VM image resides +* path => absolute path of image in gluster volume +* +* {tuple} => {"host":"1.2.3.4"[,"port":"24007","transport":"tcp"]} +* +* host => host address (hostname/ipv4/ipv6 addresses) +* port => port number on which glusterd is listening (default 24007) +* tranport => transport type used to connect to gluster management daemon, +* it can be tcp|rdma (default 'tcp') +* +* +* Examples: +* Pattern I: +* -drive driver=qcow2,file.driver=gluster, +* file.volume=testvol,file.path=/path/a.qcow2, +* file.servers.0.host=1.2.3.4, +* file.servers.0.port=24007, +* file.servers.0.transport=tcp, +* file.servers.1.host=5.6.7.8, +* file.servers.1.port=24008, +* file.servers.1.transport=rdma, ... +* +* -drive driver=qcow2,file.driver=gluster, +* file.volume=testvol,file.path=/path/a.qcow2, +* file.servers.0.host=1.2.3.4, +* file.servers.1.host=5.6.7.8, ... +* +* -drive driver=qcow2,file.driver=gluster, +* file.volume=testvol,file.path=/path/a.qcow2, +* file.servers.0.host=1.2.3.4, +* file.servers.0.port=24007, +* file.servers.1.host=5.6.7.8, +* file.servers.1.port=24008, ... +* +* -drive driver=qcow2,file.driver=gluster, +* file.volume=testvol,file.path=/path/a.qcow2, +* file.servers.0.host=1.2.3.4, +* file.servers.0.transport=tcp, +* file.servers.1.host=5.6.7.8, +* file.servers.1.transport=rdma, ... +* +* Pattern II: +* 'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol", +* "path":"/path/a.qcow2","servers": +* [{"host":"1.2.3.4","port":"24007","transport":"tcp"}, +* {"host":"4.5.6.7","port":"24008","transport":"rdma"}, ...]}}' +* +* 'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol", +* "path":"/path/a.qcow2","servers": +* [{"host":"1.2.3.4"}, +* {"host":"4.5.6.7"}, ...]}}' +* +* +* 'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol", +* "path":"/path/a.qcow2","servers": +* [{"host":"1.2.3.4","port":"24007"}, +* {"host":"4.5.6.7","port":"24008"}, ...]}}' +* +* +* 'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol", +* "path":"/path/a.qcow2","servers": +* [{"host":"1.2.3.4","transport":"tcp"}, +* {"host":"4.5.6.7","transport":"rdma"}, ...]}}' +* +* Just for better readability pattern II is kept as: +* json: +* { +* "driver":"qcow2", +* "file":{ +* "driver":"gluster", +* "volume":"testvol", +* "path":"/path/a.qcow2", +* "servers":[ +* { +* "host":"1.2.3.4", +* "port":"24007", +* "transport":"tcp" +* }, +* { +* "host":"5.6.7.8", +* "port":"24008", +* "transport":"rdma" +* } +* ] +* } +* } +* +*/ +static int qemu_gluster_parsejson(GlusterConf **pgconf, QDict *options) +{ + QemuOpts *opts; + GlusterConf *gconf = NULL; + QDict *backing_options = NULL; + Error *local_err = NULL; + char *str = NULL; + const char *ptr = NULL; + int num_servers; + int i; + + /* create opts info from runtime_json_opts list */ + opts = qemu_opts_create(&runtime_json_opts, NULL, 0, &error_abort); + qemu_opts_absorb_qdict(opts, options, &local_err); + if (local_err) { + goto out; + } + num_servers = qdict_array_entries(options, GLUSTER_OPT_SERVERS_PATTERN); + if (num_servers < 1) { + error_setg(&local_err, "Error: qemu_gluster: please provide 'servers' " + "option with valid fields in array of tuples"); + goto out; + } + + gconf = g_new0(GlusterConf, 1); + gconf->gsconf = g_new0(GlusterServerConf, num_servers); + + ptr = qemu_opt_get(opts, GLUSTER_OPT_VOLUME); + if (!ptr) { + error_setg(&local_err, "Error: qemu_gluster: please provide 'volume' " + "option"); + goto out; + } + gconf->volume = g_strdup(ptr); + + ptr = qemu_opt_get(opts, GLUSTER_OPT_PATH); + if (!ptr) { + error_setg(&local_err, "Error: qemu_gluster: please provide 'path' " + "option"); + goto out; + } + gconf->path = g_strdup(ptr); + + qemu_opts_del(opts); + + /* create opts info from runtime_tuple_opts list */ + str = g_malloc(40); + for (i = 0; i < num_servers; i++) { + opts = qemu_opts_create(&runtime_tuple_opts, NULL, 0, &error_abort); + g_assert(sprintf(str, GLUSTER_OPT_SERVERS_PATTERN"%d.", i) <= 40); + qdict_extract_subqdict(options, &backing_options, str); + qemu_opts_absorb_qdict(opts, backing_options, &local_err); + if (local_err) { + goto out; + } + qdict_del(backing_options, str); + + ptr = qemu_opt_get(opts, GLUSTER_OPT_HOST); + if (!ptr) { + error_setg(&local_err, "Error: qemu_gluster: servers.{tuple.%d} " + "requires 'host' option", i); + goto out; + } + gconf->gsconf[i].host = g_strdup(ptr); + + ptr = qemu_opt_get(opts, GLUSTER_OPT_TRANSPORT); + /* check whether transport type specified in json command is valid */ + if (parse_transport_option(ptr) < 0) { + error_setg(&local_err, "Error: qemu_gluster: please set 'transport'" + " type in tuple.%d as tcp or rdma", i); + goto out; + } + /* only if valid transport i.e. either of tcp|rdma is specified */ + gconf->gsconf[i].transport = g_strdup(ptr); + + gconf->gsconf[i].port = qemu_opt_get_number(opts, GLUSTER_OPT_PORT, + GLUSTER_DEFAULT_PORT); + + qemu_opts_del(opts); + } + + *pgconf = gconf; + g_free(str); + return num_servers; + +out: + error_report_err(local_err); + qemu_gluster_gconf_free(gconf); + qemu_opts_del(opts); + if (str) { + qdict_del(backing_options, str); + g_free(str); + } + errno = EINVAL; + return -errno; +} + +static struct glfs *qemu_gluster_init(GlusterConf **gconf, const char *filename, + QDict *options, Error **errp) +{ + int ret; + int num_servers = 1; + + if (filename) { + ret = qemu_gluster_parseuri(gconf, filename); + if (ret < 0) { + error_setg(errp, "Usage: file=gluster[+transport]://[host[:port]]/" + "volume/path[?socket=...]"); + errno = -ret; + return NULL; + } + } else { + num_servers = qemu_gluster_parsejson(gconf, options); + if (num_servers < 1) { + error_setg(errp, "Wrong Usage!"); + error_append_hint(errp, + "Usage1: " + "-drive driver=qcow2,file.driver=gluster," + "file.volume=testvol,file.path=/path/a.qcow2," + "file.servers.0.host=1.2.3.4," + "[file.servers.0.port=24007,]" + "[file.servers.0.transport=tcp,]" + "file.servers.1.host=5.6.7.8," + "[file.servers.1.port=24008,]" + "[file.servers.1.transport=rdma,] ..."); + error_append_hint(errp, + "\nUsage2: " + "'json:{\"driver\":\"qcow2\",\"file\":" + "{\"driver\":\"gluster\",\"volume\":\"" + "testvol\",\"path\":\"/path/a.qcow2\"," + "\"servers\":[{\"host\":\"1.2.3.4\"," + "\"port\":\"24007\",\"transport\":\"tcp\"}," + "{\"host\":\"4.5.6.7\",\"port\":\"24007\"," + "\"transport\":\"rdma\"}, ...]}}'"); + errno = -num_servers; + return NULL; + } + } + + return qemu_gluster_glfs_init(*gconf, num_servers, errp); +} + static void qemu_gluster_complete_aio(void *opaque) { GlusterAIOCB *acb = (GlusterAIOCB *)opaque; @@ -309,13 +644,13 @@ static void qemu_gluster_parse_flags(int bdrv_flags, int *open_flags) } } -static int qemu_gluster_open(BlockDriverState *bs, QDict *options, +static int qemu_gluster_open(BlockDriverState *bs, QDict *options, int bdrv_flags, Error **errp) { BDRVGlusterState *s = bs->opaque; int open_flags = 0; int ret = 0; - GlusterConf *gconf = g_new0(GlusterConf, 1); + GlusterConf *gconf = NULL; QemuOpts *opts; Error *local_err = NULL; const char *filename; @@ -329,8 +664,7 @@ static int qemu_gluster_open(BlockDriverState *bs, QDict *options, } filename = qemu_opt_get(opts, "filename"); - - s->glfs = qemu_gluster_init(gconf, filename, errp); + s->glfs = qemu_gluster_init(&gconf, filename, options, errp); if (!s->glfs) { ret = -errno; goto out; @@ -374,9 +708,7 @@ static int qemu_gluster_reopen_prepare(BDRVReopenState *state, qemu_gluster_parse_flags(state->flags, &open_flags); - gconf = g_new0(GlusterConf, 1); - - reop_s->glfs = qemu_gluster_init(gconf, state->bs->filename, errp); + reop_s->glfs = qemu_gluster_init(&gconf, state->bs->filename, NULL, errp); if (reop_s->glfs == NULL) { ret = -errno; goto exit; @@ -500,15 +832,15 @@ static inline int qemu_gluster_zerofill(struct glfs_fd *fd, int64_t offset, static int qemu_gluster_create(const char *filename, QemuOpts *opts, Error **errp) { + GlusterConf *gconf = NULL; struct glfs *glfs; struct glfs_fd *fd; int ret = 0; int prealloc = 0; int64_t total_size = 0; char *tmp = NULL; - GlusterConf *gconf = g_new0(GlusterConf, 1); - glfs = qemu_gluster_init(gconf, filename, errp); + glfs = qemu_gluster_init(&gconf, filename, NULL, errp); if (!glfs) { ret = -errno; goto out; @@ -523,7 +855,7 @@ static int qemu_gluster_create(const char *filename, } else if (!strcmp(tmp, "full") && gluster_supports_zerofill()) { prealloc = 1; } else { - error_setg(errp, "Invalid preallocation mode: '%s'" + error_setg(errp, "Error: Invalid preallocation mode: '%s'" " or GlusterFS doesn't support zerofill API", tmp); ret = -EINVAL; goto out; @@ -725,7 +1057,7 @@ static BlockDriver bdrv_gluster = { .format_name = "gluster", .protocol_name = "gluster", .instance_size = sizeof(BDRVGlusterState), - .bdrv_needs_filename = true, + .bdrv_needs_filename = false, .bdrv_file_open = qemu_gluster_open, .bdrv_reopen_prepare = qemu_gluster_reopen_prepare, .bdrv_reopen_commit = qemu_gluster_reopen_commit, @@ -752,7 +1084,7 @@ static BlockDriver bdrv_gluster_tcp = { .format_name = "gluster", .protocol_name = "gluster+tcp", .instance_size = sizeof(BDRVGlusterState), - .bdrv_needs_filename = true, + .bdrv_needs_filename = false, .bdrv_file_open = qemu_gluster_open, .bdrv_reopen_prepare = qemu_gluster_reopen_prepare, .bdrv_reopen_commit = qemu_gluster_reopen_commit, @@ -806,7 +1138,7 @@ static BlockDriver bdrv_gluster_rdma = { .format_name = "gluster", .protocol_name = "gluster+rdma", .instance_size = sizeof(BDRVGlusterState), - .bdrv_needs_filename = true, + .bdrv_needs_filename = false, .bdrv_file_open = qemu_gluster_open, .bdrv_reopen_prepare = qemu_gluster_reopen_prepare, .bdrv_reopen_commit = qemu_gluster_reopen_commit, diff --git a/qapi/block-core.json b/qapi/block-core.json index bb2189e..62c0551 100644 --- a/qapi/block-core.json +++ b/qapi/block-core.json @@ -1375,15 +1375,16 @@ # # @host_device, @host_cdrom, @host_floppy: Since 2.1 # @host_floppy: deprecated since 2.3 +# @gluster: Since 2.5 # # Since: 2.0 ## { 'enum': 'BlockdevDriver', 'data': [ 'archipelago', 'blkdebug', 'blkverify', 'bochs', 'cloop', - 'dmg', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device', - 'host_floppy', 'http', 'https', 'null-aio', 'null-co', 'parallels', - 'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'tftp', 'vdi', 'vhdx', - 'vmdk', 'vpc', 'vvfat' ] } + 'dmg', 'file', 'ftp', 'ftps', 'gluster', 'host_cdrom', + 'host_device', 'host_floppy', 'http', 'https', 'null-aio', + 'null-co', 'parallels', 'qcow', 'qcow2', 'qed', 'quorum', 'raw', + 'tftp', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] } ## # @BlockdevOptionsBase @@ -1794,6 +1795,57 @@ '*read-pattern': 'QuorumReadPattern' } } ## +# @GlusterTransport +# +# An enumeration of Gluster transport type +# +# @tcp: TCP - Transmission Control Protocol +# +# @rdma: RDMA - Remote direct memory access +# +# Since: 2.5 +## +{ 'enum': 'GlusterTransport', 'data': [ 'tcp', 'rdma' ] } + +## +# @GlusterTuple +# +# Gluster tuple set +# +# @host: host address (hostname/ipv4/ipv6 addresses) +# +# @port: #optional port number on which glusterd is listening +# (default 24007) +# +# @transport: #optional transport type used to connect to gluster management +# daemon (default 'tcp') +# +# Since: 2.5 +## +{ 'struct': 'GlusterTuple', + 'data': { 'host': 'str', + '*port': 'int', + '*transport': 'GlusterTransport' } } + +## +# @BlockdevOptionsGluster +# +# Driver specific block device options for Gluster +# +# @volume: name of gluster volume where our VM image resides +# +# @path: absolute path to image file in gluster volume +# +# @servers: one or more gluster server descriptions (host, port, and transport) +# +# Since: 2.5 +## +{ 'struct': 'BlockdevOptionsGluster', + 'data': { 'volume': 'str', + 'path': 'str', + 'servers': [ 'GlusterTuple' ] } } + +## # @BlockdevOptions # # Options for creating a block device. @@ -1813,7 +1865,7 @@ 'file': 'BlockdevOptionsFile', 'ftp': 'BlockdevOptionsFile', 'ftps': 'BlockdevOptionsFile', -# TODO gluster: Wait for structured options + 'gluster': 'BlockdevOptionsGluster', 'host_cdrom': 'BlockdevOptionsFile', 'host_device':'BlockdevOptionsFile', 'host_floppy':'BlockdevOptionsFile', -- 2.1.0