From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gavin Shan Subject: [PATCH v7 14/50] powerpc/powernv: M64 support on P7IOC Date: Thu, 5 Nov 2015 00:12:14 +1100 Message-ID: <1446642770-4681-15-git-send-email-gwshan@linux.vnet.ibm.com> References: <1446642770-4681-1-git-send-email-gwshan@linux.vnet.ibm.com> Return-path: In-Reply-To: <1446642770-4681-1-git-send-email-gwshan@linux.vnet.ibm.com> Sender: linux-pci-owner@vger.kernel.org To: linuxppc-dev@lists.ozlabs.org Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org, benh@kernel.crashing.org, mpe@ellerman.id.au, aik@ozlabs.ru, bhelgaas@google.com, grant.likely@linaro.org, robherring2@gmail.com, panto@antoniou-consulting.com, frowand.list@gmail.com, Gavin Shan List-Id: devicetree@vger.kernel.org This enables M64 window on P7IOC, which has been enabled on PHB3. Different from PHB3 where 16 M64 BARs are supported and each of them can be owned by one particular PE# exclusively or divided evenly to 256 segments, every P7IOC PHB has 16 M64 BARs and each of them are divided to 8 segments. So every P7IOC PHB supports 128 M64 segments in total. P7IOC has M64DT, which helps mapping one particular M64 segment# to arbitrary PE#. PHB3 doesn't have M64DT, indicating that one M64 segment can only be pinned to the fixed PE#. In order to have same code to support M64 on P7IOC and PHB3, we just provide 128 M64 segments on every P7IOC PHB and each of them is pinned to the fixed PE# by bypassing the function of M64DT. In turn, we just need different phb->init_m64() for P7IOC and PHB3 to support M64. Signed-off-by: Gavin Shan --- arch/powerpc/platforms/powernv/pci-ioda.c | 86 +++++++++++++++++++++++++++++-- arch/powerpc/platforms/powernv/pci.h | 3 ++ 2 files changed, 86 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 1f7d985..bfe69f1 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -256,6 +256,64 @@ static void pnv_ioda_reserve_dev_m64_pe(struct pci_dev *pdev, } } +static int pnv_ioda1_init_m64(struct pnv_phb *phb) +{ + struct resource *r; + int index; + + /* + * There are 16 M64 BARs, each of which has 8 segments. So + * there are as many M64 segments as the maximum number of + * PEs, which is 128. + */ + for (index = 0; index < PNV_IODA1_M64_NUM; index++) { + unsigned long base, segsz = phb->ioda.m64_segsize; + int64_t rc; + + base = phb->ioda.m64_base + + index * PNV_IODA1_M64_SEGS * segsz; + rc = opal_pci_set_phb_mem_window(phb->opal_id, + OPAL_M64_WINDOW_TYPE, index, base, 0, + PNV_IODA1_M64_SEGS * segsz); + if (rc != OPAL_SUCCESS) { + pr_warn(" Error %lld setting M64 PHB#%d-BAR#%d\n", + rc, phb->hose->global_number, index); + goto fail; + } + + rc = opal_pci_phb_mmio_enable(phb->opal_id, + OPAL_M64_WINDOW_TYPE, index, + OPAL_ENABLE_M64_SPLIT); + if (rc != OPAL_SUCCESS) { + pr_warn(" Error %lld enabling M64 PHB#%d-BAR#%d\n", + rc, phb->hose->global_number, index); + goto fail; + } + } + + /* + * Exclude the segment used by the reserved PE, which + * is expected to be 0 or last supported PE#. + */ + r = &phb->hose->mem_resources[1]; + if (phb->ioda.reserved_pe_idx == 0) + r->start += phb->ioda.m64_segsize; + else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1)) + r->end -= phb->ioda.m64_segsize; + else + pr_warn(" Cannot cut M64 segment for reserved PE#%d\n", + phb->ioda.reserved_pe_idx); + + return 0; + +fail: + for ( ; index >= 0; index--) + opal_pci_phb_mmio_enable(phb->opal_id, + OPAL_M64_WINDOW_TYPE, index, OPAL_DISABLE_M64); + + return -EIO; +} + static void pnv_ioda_reserve_m64_pe(struct pci_bus *bus, unsigned long *pe_bitmap, bool all) @@ -325,6 +383,26 @@ static int pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool all) pe->master = master_pe; list_add_tail(&pe->list, &master_pe->slaves); } + + /* + * P7IOC supports M64DT, which helps mapping M64 segment + * to one particular PE#. However, PHB3 has fixed mapping + * between M64 segment and PE#. In order to have same logic + * for P7IOC and PHB3, we enforce fixed mapping between M64 + * segment and PE# on P7IOC. + */ + if (phb->type == PNV_PHB_IODA1) { + int64_t rc; + + rc = opal_pci_map_pe_mmio_window(phb->opal_id, + pe->pe_number, OPAL_M64_WINDOW_TYPE, + pe->pe_number / PNV_IODA1_M64_SEGS, + pe->pe_number % PNV_IODA1_M64_SEGS); + if (rc != OPAL_SUCCESS) + pr_warn("%s: Error %lld mapping M64 for PHB#%d-PE#%d\n", + __func__, rc, phb->hose->global_number, + pe->pe_number); + } } kfree(pe_alloc); @@ -339,8 +417,7 @@ static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb) const u32 *r; u64 pci_addr; - /* FIXME: Support M64 for P7IOC */ - if (phb->type != PNV_PHB_IODA2) { + if (phb->type != PNV_PHB_IODA1 && phb->type != PNV_PHB_IODA2) { pr_info(" Not support M64 window\n"); return; } @@ -373,7 +450,10 @@ static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb) /* Use last M64 BAR to cover M64 window */ phb->ioda.m64_bar_idx = 15; - phb->init_m64 = pnv_ioda2_init_m64; + if (phb->type == PNV_PHB_IODA1) + phb->init_m64 = pnv_ioda1_init_m64; + else + phb->init_m64 = pnv_ioda2_init_m64; phb->reserve_m64_pe = pnv_ioda_reserve_m64_pe; phb->pick_m64_pe = pnv_ioda_pick_m64_pe; } diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index 671fd13..c4019ac 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -78,6 +78,9 @@ struct pnv_ioda_pe { struct list_head list; }; +#define PNV_IODA1_M64_NUM 16 /* Number of M64 BARs */ +#define PNV_IODA1_M64_SEGS 8 /* Segments per M64 BAR */ + #define PNV_PHB_FLAG_EEH (1 << 0) struct pnv_phb { -- 2.1.0