[U-Boot] [PATCH v5 07/21] rockchip: Bring in RK3036 device tree file includes and bindings

[Lin Huang <hl@rock-chips.com>]

Since rk3036 device tree file still in reviewing, bring it from
https://patchwork.kernel.org/patch/7203371/ and add some aliases
we need in uboot

Signed-off-by: Lin Huang <hl@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
---
Changes in v1:
- clean copyright announcement
Changes in v2: None
Changes in v3: None
Changes in v4: None
Changes in v5: None

 arch/arm/dts/rk3036.dtsi               | 427 +++++++++++++++++++++++++++++++++
 include/dt-bindings/clock/rk3036-cru.h | 186 ++++++++++++++
 2 files changed, 613 insertions(+)
 create mode 100644 arch/arm/dts/rk3036.dtsi
 create mode 100644 include/dt-bindings/clock/rk3036-cru.h

diff --git a/arch/arm/dts/rk3036.dtsi b/arch/arm/dts/rk3036.dtsi
new file mode 100644
index 0000000..0daae1e
--- /dev/null
+++ b/arch/arm/dts/rk3036.dtsi
@@ -0,0 +1,427 @@
+/*
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3036-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "rockchip,rk3036";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		i2c1 = &i2c1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		mmc0 = &emmc;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+        arm-pmu {
+                compatible = "arm,cortex-a7-pmu";
+                interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+                interrupt-affinity = <&cpu0>, <&cpu1>;
+        };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3036-smp";
+
+		cpu0: cpu at f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			operating-points = <
+				/* KHz    uV */
+				 816000 1000000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+			resets = <&cru SRST_CORE0>;
+		};
+		cpu1: cpu at f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			resets = <&cru SRST_CORE1>;
+		};
+	};
+
+	amba {
+		compatible = "arm,amba-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+                pdma: pdma at 20078000 {
+                        compatible = "arm,pl330", "arm,primecell";
+                        reg = <0x20078000 0x4000>;
+                        arm,pl330-broken-no-flushp;
+                        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+                        #dma-cells = <1>;
+                        clocks = <&cru ACLK_DMAC2>;
+                        clock-names = "apb_pclk";
+                };
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	cru: clock-controller at 20000000 {
+		compatible = "rockchip,rk3036-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	uart0: serial at 20060000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20060000 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	};
+
+	uart1: serial at 20064000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20064000 0x100>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+	};
+
+	uart2: serial at 20068000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20068000 0x100>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+	};
+
+	pwm0: pwm at 20050000 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20050000 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm1: pwm at 20050010 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20050010 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm2: pwm at 20050020 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20050020 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm3: pwm at 20050030 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20050030 0x10>;
+		#pwm-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	sram: sram at 10080000 {
+		compatible = "rockchip,rk3036-smp-sram", "mmio-sram";
+		reg = <0x10080000 0x2000>;
+	};
+
+	gic: interrupt-controller at 10139000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x10139000 0x1000>,
+		      <0x1013a000 0x1000>,
+		      <0x1013c000 0x2000>,
+		      <0x1013e000 0x2000>;
+		interrupts = <GIC_PPI 9 0xf04>;
+	};
+
+	grf: syscon at 20008000 {
+		compatible = "rockchip,rk3036-grf", "syscon";
+		reg = <0x20008000 0x1000>;
+	};
+
+	usb_otg: usb at 10180000 {
+		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x10180000 0x40000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG0>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		g-use-dma;
+		status = "disabled";
+	};
+
+	usb_host: usb at 101c0000 {
+		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x101c0000 0x40000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG1>;
+		clock-names = "otg";
+		dr_mode = "host";
+		status = "disabled";
+	};
+
+	emmc: dwmmc at 1021c000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		clock-frequency = <37500000>;
+		clock-freq-min-max = <400000 37500000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+		<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		dmas = <&pdma 12>;
+		dma-names = "rx-tx";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x1021c000 0x4000>;
+		broken-cd;
+		bus-width = <8>;
+		cap-mmc-highspeed;
+		mmc-ddr-1_8v;
+		disable-wp;
+		non-removable;
+		num-slots = <1>;
+		default-sample-phase = <158>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3036-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0 at 2007c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2007c000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1 at 20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2 at 20084000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20084000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		emmc {
+			/*
+			 * We run eMMC at max speed; bump up drive strength.
+			 * We also have external pulls, so disable the internal ones.
+			 */
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
+						<1 25 RK_FUNC_2 &pcfg_pull_none>,
+						<1 26 RK_FUNC_2 &pcfg_pull_none>,
+						<1 27 RK_FUNC_2 &pcfg_pull_none>;
+				/*
+						<1 28 RK_FUNC_2 &pcfg_pull_up>,
+						<1 29 RK_FUNC_2 &pcfg_pull_up>,
+						<1 30 RK_FUNC_2 &pcfg_pull_up>,
+						<1 31 RK_FUNC_2 &pcfg_pull_up>;
+						*/
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_none>,
+						<0 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
+						<2 23 RK_FUNC_1 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart1 */
+		};
+
+                uart2 {
+                        uart2_xfer: uart2-xfer {
+                                rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+                                                <1 19 RK_FUNC_2 &pcfg_pull_none>;
+                        };
+                        /* no rts / cts for uart2 */
+                };
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <0 1 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <0 27 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+						<0 3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+	};
+
+	i2c1: i2c at 20056000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0x20056000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+};
diff --git a/include/dt-bindings/clock/rk3036-cru.h b/include/dt-bindings/clock/rk3036-cru.h
new file mode 100644
index 0000000..87acf4a
--- /dev/null
+++ b/include/dt-bindings/clock/rk3036-cru.h
@@ -0,0 +1,186 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H
+
+/* core clocks */
+#define PLL_APLL		1
+#define PLL_DPLL		2
+#define PLL_GPLL		3
+#define ARMCLK			4
+
+/* sclk gates (special clocks) */
+#define SCLK_GPU		64
+#define SCLK_SPI		65
+#define SCLK_SDMMC		68
+#define SCLK_SDIO		69
+#define SCLK_EMMC		71
+#define SCLK_NANDC		76
+#define SCLK_UART0		77
+#define SCLK_UART1		78
+#define SCLK_UART2		79
+#define SCLK_I2S		82
+#define SCLK_SPDIF		83
+#define SCLK_TIMER0		85
+#define SCLK_TIMER1		86
+#define SCLK_TIMER2		87
+#define SCLK_TIMER3		88
+#define SCLK_OTGPHY0		93
+#define SCLK_LCDC		100
+#define SCLK_HDMI		109
+#define SCLK_HEVC		111
+#define SCLK_I2S_OUT		113
+#define SCLK_SDMMC_DRV		114
+#define SCLK_SDIO_DRV		115
+#define SCLK_EMMC_DRV		117
+#define SCLK_SDMMC_SAMPLE	118
+#define SCLK_SDIO_SAMPLE	119
+#define SCLK_EMMC_SAMPLE	121
+#define SCLK_PVTM_CORE          123
+#define SCLK_PVTM_GPU           124
+#define SCLK_PVTM_VIDEO         125
+#define SCLK_MAC		151
+#define SCLK_MACREF		152
+#define SCLK_SFC		160
+
+#define DCLK_LCDC		190
+
+/* aclk gates */
+#define ACLK_DMAC2		194
+#define ACLK_LCDC		197
+#define ACLK_VIO		203
+#define ACLK_VCODEC		208
+#define ACLK_CPU		209
+#define ACLK_PERI		210
+
+/* pclk gates */
+#define PCLK_GPIO0		320
+#define PCLK_GPIO1		321
+#define PCLK_GPIO2		322
+#define PCLK_GRF		329
+#define PCLK_I2C0		332
+#define PCLK_I2C1		333
+#define PCLK_I2C2		334
+#define PCLK_SPI		338
+#define PCLK_UART0		341
+#define PCLK_UART1		342
+#define PCLK_UART2		343
+#define PCLK_PWM		350
+#define PCLK_TIMER		353
+#define PCLK_HDMI		360
+#define PCLK_CPU		362
+#define PCLK_PERI		363
+#define PCLK_DDRUPCTL		364
+#define PCLK_WDT		368
+
+/* hclk gates */
+#define HCLK_OTG0		449
+#define HCLK_OTG1		450
+#define HCLK_NANDC		453
+#define HCLK_SDMMC		456
+#define HCLK_SDIO		457
+#define HCLK_EMMC		459
+#define HCLK_I2S		462
+#define HCLK_LCDC		465
+#define HCLK_ROM		467
+#define HCLK_VIO_BUS		472
+#define HCLK_VCODEC		476
+#define HCLK_CPU		477
+#define HCLK_PERI		478
+
+#define CLK_NR_CLKS		(HCLK_PERI + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0		0
+#define SRST_CORE1		1
+#define SRST_CORE0_DBG		4
+#define SRST_CORE1_DBG		5
+#define SRST_CORE0_POR		8
+#define SRST_CORE1_POR		9
+#define SRST_L2C		12
+#define SRST_TOPDBG		13
+#define SRST_STRC_SYS_A		14
+#define SRST_PD_CORE_NIU	15
+
+#define SRST_TIMER2		16
+#define SRST_CPUSYS_H		17
+#define SRST_AHB2APB_H		19
+#define SRST_TIMER3		20
+#define SRST_INTMEM		21
+#define SRST_ROM		22
+#define SRST_PERI_NIU		23
+#define SRST_I2S		24
+#define SRST_DDR_PLL		25
+#define SRST_GPU_DLL		26
+#define SRST_TIMER0		27
+#define SRST_TIMER1		28
+#define SRST_CORE_DLL		29
+#define SRST_EFUSE_P		30
+#define SRST_ACODEC_P		31
+
+#define SRST_GPIO0		32
+#define SRST_GPIO1		33
+#define SRST_GPIO2		34
+#define SRST_UART0		39
+#define SRST_UART1		40
+#define SRST_UART2		41
+#define SRST_I2C0		43
+#define SRST_I2C1		44
+#define SRST_I2C2		45
+#define SRST_SFC		47
+
+#define SRST_PWM0		48
+#define SRST_DAP		51
+#define SRST_DAP_SYS		52
+#define SRST_GRF		55
+#define SRST_PERIPHSYS_A	57
+#define SRST_PERIPHSYS_H	58
+#define SRST_PERIPHSYS_P	59
+#define SRST_CPU_PERI		61
+#define SRST_EMEM_PERI		62
+#define SRST_USB_PERI		63
+
+#define SRST_DMA2		64
+#define SRST_MAC		66
+#define SRST_NANDC		68
+#define SRST_USBOTG0		69
+#define SRST_OTGC0		71
+#define SRST_USBOTG1		72
+#define SRST_OTGC1		74
+#define SRST_DDRMSCH		79
+
+#define SRST_MMC0		81
+#define SRST_SDIO		82
+#define SRST_EMMC		83
+#define SRST_SPI0		84
+#define SRST_WDT		86
+#define SRST_DDRPHY		88
+#define SRST_DDRPHY_P		89
+#define SRST_DDRCTRL		90
+#define SRST_DDRCTRL_P		91
+
+#define SRST_HDMI_P		96
+#define SRST_VIO_BUS_H		99
+#define SRST_UTMI0		103
+#define SRST_UTMI1		104
+#define SRST_USBPOR		105
+
+#define SRST_VCODEC_A		112
+#define SRST_VCODEC_H		113
+#define SRST_VIO1_A		114
+#define SRST_HEVC		115
+#define SRST_VCODEC_NIU_A	116
+#define SRST_LCDC1_A		117
+#define SRST_LCDC1_H		118
+#define SRST_LCDC1_D		119
+#define SRST_GPU		120
+#define SRST_GPU_NIU_A		122
+
+#define SRST_DBG_P		131
+
+#endif
-- 
1.9.1