All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wayne Boyer <wayne.boyer@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH] drm/i915/skl: Implement DP Aux Mutex framework
Date: Wed, 11 Nov 2015 16:41:00 -0800	[thread overview]
Message-ID: <1447288860-2498-1-git-send-email-wayne.boyer@intel.com> (raw)
In-Reply-To: <1447268743-2328-6-git-send-email-rodrigo.vivi@intel.com>

From: "Boyer, Wayne" <wayne.boyer@intel.com>

Beginning with SKL the DP Aux channel communication can be protected
using a built in HW mutex.

When PSR is enabled the HW takes control on AUX and uses it to
control panel exit/entry states.

When validating PSR with automated tests, grabbing CRC from sink
revealed strange aux communication issues.  Aux reads were returning
a message read size equal to 0 and 0 is a forbidden message.

By using the HW mutex the HW is blocked from using aux when running
the automated PSR tests.

This patch provides an initial implementation for using that mutex.
The use is currently limited to protecting the sink crc request based
on feedback from the H/W designers indicating that using the mutex
for all aux channel communication is not recommended.

v2: Improved commit message to explain the case where the HW mutex is
helpful.  Also added bug reference.
v3: Fix typos in commit message.

Signed-off-by: Wayne Boyer <wayne.boyer@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91437
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h |  1 +
 drivers/gpu/drm/i915/i915_reg.h |  5 ++++
 drivers/gpu/drm/i915/intel_dp.c | 52 ++++++++++++++++++++++++++++++++++++++++-
 3 files changed, 57 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index d5cf30b..ac7ed0d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2585,6 +2585,7 @@ struct drm_i915_cmd_table {
 
 #define HAS_DDI(dev)		(INTEL_INFO(dev)->has_ddi)
 #define HAS_FPGA_DBG_UNCLAIMED(dev)	(INTEL_INFO(dev)->has_fpga_dbg)
+#define HAS_AUX_MUTEX(dev)	(INTEL_INFO(dev)->gen >= 9)
 #define HAS_PSR(dev)		(IS_HASWELL(dev) || IS_BROADWELL(dev) || \
 				 IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev) || \
 				 IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 8bd2699..f9ee874 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4288,6 +4288,11 @@ enum skl_disp_power_wells {
 #define   DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(c) (((c) - 1) << 5)
 #define   DP_AUX_CH_CTL_SYNC_PULSE_SKL(c)   ((c) - 1)
 
+#define DP_AUX_MUTEX_A			0x6402C
+#define DP_AUX_MUTEX_B			0x6412C
+#define   DP_AUX_MUTEX_ENABLE		    (1 << 31)
+#define   DP_AUX_MUTEX_STATUS		    (1 << 30)
+
 /*
  * Computing GMCH M and N values for the Display Port link
  *
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index da02ed7..b3c7d82 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -781,6 +781,47 @@ static uint32_t skl_get_aux_send_ctl(struct intel_dp *intel_dp,
 	       DP_AUX_CH_CTL_SYNC_PULSE_SKL(32);
 }
 
+static bool skl_aux_mutex(struct intel_dp *intel_dp, bool get)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_device *dev = intel_dig_port->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t aux_ch_mutex, status;
+	int count = 0;
+
+	if (!HAS_AUX_MUTEX(dev))
+		return false;
+
+	/*
+	 * FIXME: determine actual aux channel
+	 * Hard coded to channel A for now to protect sink crc requests on eDP.
+	 */
+	aux_ch_mutex = DP_AUX_MUTEX_A;
+
+	if (!get) {
+		I915_WRITE(aux_ch_mutex, DP_AUX_MUTEX_ENABLE | DP_AUX_MUTEX_STATUS);
+		return false;
+	}
+
+	/*
+	 * The Bspec specifies waiting 500us between attempts to acquire the
+	 * mutex.  Ten retries should be adequate to balance successfully
+	 * acquirng the mutex and spending too much time trying.
+	 */
+	while (count++ < 10) {
+		I915_WRITE(aux_ch_mutex, DP_AUX_MUTEX_ENABLE);
+		status = I915_READ(aux_ch_mutex);
+		if (!(status & DP_AUX_MUTEX_STATUS))
+			return true;
+		udelay(500);
+	}
+
+	return false;
+}
+
+#define skl_aux_mutex_get(dev) skl_aux_mutex(dev, true)
+#define skl_aux_mutex_put(dev) skl_aux_mutex(dev, false)
+
 static int
 intel_dp_aux_ch(struct intel_dp *intel_dp,
 		const uint8_t *send, int send_bytes,
@@ -3927,10 +3968,14 @@ int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
 	u8 buf;
 	int count, ret;
 	int attempts = 6;
+	bool aux_mutex_acquired = false;
+
+	aux_mutex_acquired = skl_aux_mutex_get(intel_dp);
 
 	ret = intel_dp_sink_crc_start(intel_dp);
+
 	if (ret)
-		return ret;
+		goto release;
 
 	do {
 		intel_wait_for_vblank(dev, intel_crtc->pipe);
@@ -3957,6 +4002,11 @@ int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
 
 stop:
 	intel_dp_sink_crc_stop(intel_dp);
+
+release:
+	if (aux_mutex_acquired)
+		aux_mutex_acquired = skl_aux_mutex_put(intel_dp);
+
 	return ret;
 }
 
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-11-12  0:41 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-11 19:05 [PATCH 0/5] Sink CRC stabilization Rodrigo Vivi
2015-11-11 19:05 ` [PATCH 1/5] drm/i915: Allow 1 vblank to let Sink CRC calculation to start or stop Rodrigo Vivi
2015-11-11 19:05 ` [PATCH 2/5] drm/i915: Make Sink crc calculation waiting for counter to reset Rodrigo Vivi
2015-11-11 19:05 ` [PATCH 3/5] drm/i915: Stop tracking last calculated Sink CRC Rodrigo Vivi
2015-11-11 19:05 ` [PATCH 4/5] drm/i915: Rely on TEST_SINK_START instead of tracking Sink CRC state on dev_priv Rodrigo Vivi
2015-11-11 19:05 ` [PATCH 5/5] drm/i915/skl: implement DP Aux Mutex framework Rodrigo Vivi
2015-11-12  0:41   ` Wayne Boyer [this message]
2015-11-12 10:16     ` [PATCH] drm/i915/skl: Implement " Jani Nikula
2015-11-12 10:17 ` [PATCH 0/5] Sink CRC stabilization Jani Nikula
2015-11-12 18:56   ` Vivi, Rodrigo
2015-11-12 19:02     ` Rodrigo Vivi
2015-11-16 15:59       ` Rodrigo Vivi
2015-11-18 14:55         ` Daniel Vetter
2015-11-18 18:46           ` Vivi, Rodrigo
  -- strict thread matches above, loose matches on Subject: below --
2015-11-09 23:35 [PATCH] drm/i915/skl: implement DP Aux Mutex framework Wayne Boyer
2015-11-10 10:51 ` Jani Nikula
2015-11-10 11:14   ` Dave Airlie
2015-11-10 15:31     ` Vivi, Rodrigo
2015-11-11  0:49     ` Wayne Boyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1447288860-2498-1-git-send-email-wayne.boyer@intel.com \
    --to=wayne.boyer@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.