[PATCH 0/6] serial: fixes and cleanups

[PATCH 0/6] serial: fixes and cleanups

[Arnd Bergmann]

I've had these patches sitting in my randconfig branch for a while,
but have now gotten around to sending them. The first three are
bug fixes for harmless problems that have shown up recently,
so they should go into 4.4.

The other three are part of a cleanup that we've been meaning
to do for a while but that is not urgent at all.

Arnd Bergmann (6):
  serial: export fsl8250_handle_irq
  serial: fsl-lpuart: move SERIAL_EARLYCON dependency to console
  serial: mid8250: select CONFIG_RATIONAL
  serial: remove NWP serial support
  serial: of: CONFIG_SERIAL_8250 is always set
  serial: 8250: move of_serial code to 8250 directory

 drivers/tty/serial/8250/8250_fsl.c                 |   1 +
 drivers/tty/serial/{of_serial.c => 8250/8250_of.c} |  32 --
 drivers/tty/serial/8250/Kconfig                    |  10 +
 drivers/tty/serial/8250/Makefile                   |   1 +
 drivers/tty/serial/Kconfig                         |  29 +-
 drivers/tty/serial/Makefile                        |   2 -
 drivers/tty/serial/nwpserial.c                     | 477 ---------------------
 include/linux/nwpserial.h                          |  18 -
 include/uapi/linux/serial_core.h                   |   2 +-
 9 files changed, 14 insertions(+), 558 deletions(-)
 rename drivers/tty/serial/{of_serial.c => 8250/8250_of.c} (92%)
 delete mode 100644 drivers/tty/serial/nwpserial.c
 delete mode 100644 include/linux/nwpserial.h

-- 
2.1.0.rc2

Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Benjamin Krill <ben@codiert.org>
Cc: linuxppc-dev@lists.ozlabs.org

[PATCH 0/6] serial: fixes and cleanups

[Arnd Bergmann]

I've had these patches sitting in my randconfig branch for a while,
but have now gotten around to sending them. The first three are
bug fixes for harmless problems that have shown up recently,
so they should go into 4.4.

The other three are part of a cleanup that we've been meaning
to do for a while but that is not urgent at all.

Arnd Bergmann (6):
  serial: export fsl8250_handle_irq
  serial: fsl-lpuart: move SERIAL_EARLYCON dependency to console
  serial: mid8250: select CONFIG_RATIONAL
  serial: remove NWP serial support
  serial: of: CONFIG_SERIAL_8250 is always set
  serial: 8250: move of_serial code to 8250 directory

 drivers/tty/serial/8250/8250_fsl.c                 |   1 +
 drivers/tty/serial/{of_serial.c => 8250/8250_of.c} |  32 --
 drivers/tty/serial/8250/Kconfig                    |  10 +
 drivers/tty/serial/8250/Makefile                   |   1 +
 drivers/tty/serial/Kconfig                         |  29 +-
 drivers/tty/serial/Makefile                        |   2 -
 drivers/tty/serial/nwpserial.c                     | 477 ---------------------
 include/linux/nwpserial.h                          |  18 -
 include/uapi/linux/serial_core.h                   |   2 +-
 9 files changed, 14 insertions(+), 558 deletions(-)
 rename drivers/tty/serial/{of_serial.c => 8250/8250_of.c} (92%)
 delete mode 100644 drivers/tty/serial/nwpserial.c
 delete mode 100644 include/linux/nwpserial.h

-- 
2.1.0.rc2

Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Benjamin Krill <ben@codiert.org>
Cc: linuxppc-dev at lists.ozlabs.org

[PATCH 1/6] serial: export fsl8250_handle_irq

[Arnd Bergmann]

fsl8250_handle_irq is now used by the of_serial driver, and that fails
if it is a loadable module:

ERROR: "fsl8250_handle_irq" [drivers/tty/serial/of_serial.ko] undefined!

This exports the symbol to avoid randconfig errors.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d43b54d269d2 ("serial: Enable Freescale 16550 workaround on arm")
Cc: Scott Wood <scottwood@freescale.com>
---
 drivers/tty/serial/8250/8250_fsl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index c0533a57ec53..910bfee5a88b 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -60,3 +60,4 @@ int fsl8250_handle_irq(struct uart_port *port)
 	spin_unlock_irqrestore(&up->port.lock, flags);
 	return 1;
 }
+EXPORT_SYMBOL_GPL(fsl8250_handle_irq);
-- 
2.1.0.rc2

[PATCH 1/6] serial: export fsl8250_handle_irq

[Arnd Bergmann]

fsl8250_handle_irq is now used by the of_serial driver, and that fails
if it is a loadable module:

ERROR: "fsl8250_handle_irq" [drivers/tty/serial/of_serial.ko] undefined!

This exports the symbol to avoid randconfig errors.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d43b54d269d2 ("serial: Enable Freescale 16550 workaround on arm")
Cc: Scott Wood <scottwood@freescale.com>
---
 drivers/tty/serial/8250/8250_fsl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index c0533a57ec53..910bfee5a88b 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -60,3 +60,4 @@ int fsl8250_handle_irq(struct uart_port *port)
 	spin_unlock_irqrestore(&up->port.lock, flags);
 	return 1;
 }
+EXPORT_SYMBOL_GPL(fsl8250_handle_irq);
-- 
2.1.0.rc2

[PATCH 1/6] serial: export fsl8250_handle_irq

[Arnd Bergmann]

fsl8250_handle_irq is now used by the of_serial driver, and that fails
if it is a loadable module:

ERROR: "fsl8250_handle_irq" [drivers/tty/serial/of_serial.ko] undefined!

This exports the symbol to avoid randconfig errors.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d43b54d269d2 ("serial: Enable Freescale 16550 workaround on arm")
Cc: Scott Wood <scottwood@freescale.com>
---
 drivers/tty/serial/8250/8250_fsl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index c0533a57ec53..910bfee5a88b 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -60,3 +60,4 @@ int fsl8250_handle_irq(struct uart_port *port)
 	spin_unlock_irqrestore(&up->port.lock, flags);
 	return 1;
 }
+EXPORT_SYMBOL_GPL(fsl8250_handle_irq);
-- 
2.1.0.rc2

[PATCH 2/6] serial: fsl-lpuart: move SERIAL_EARLYCON dependency to console

[Arnd Bergmann]

The newly added earlycon support for lpuart adds a
'select SERIAL_EARLYCON' statement for the tty driver, but that
only uses earlycon when console support is present, and otherwise
results in a pointless build error:

drivers/built-in.o: In function `setup_earlycon':
:(.init.text+0x2c4c): undefined reference to `uart_parse_earlycon'

This changes the Kconfig statement to only select the earlycon
code if the console is also enabled, like all the other drivers
do already.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 1d59b382f1c4 ("serial: fsl_lpuart: add earlycon support")
Cc: Stefan Agner <stefan@agner.ch>
---
 drivers/tty/serial/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 1aec4404062d..dbb8ac6afd40 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1539,13 +1539,13 @@ config SERIAL_FSL_LPUART
 	tristate "Freescale lpuart serial port support"
 	depends on HAS_DMA
 	select SERIAL_CORE
-	select SERIAL_EARLYCON
 	help
 	  Support for the on-chip lpuart on some Freescale SOCs.
 
 config SERIAL_FSL_LPUART_CONSOLE
 	bool "Console on Freescale lpuart serial port"
 	depends on SERIAL_FSL_LPUART=y
+	select SERIAL_EARLYCON
 	select SERIAL_CORE_CONSOLE
 	help
 	  If you have enabled the lpuart serial port on the Freescale SoCs,
-- 
2.1.0.rc2

[PATCH 2/6] serial: fsl-lpuart: move SERIAL_EARLYCON dependency to console

[Arnd Bergmann]

The newly added earlycon support for lpuart adds a
'select SERIAL_EARLYCON' statement for the tty driver, but that
only uses earlycon when console support is present, and otherwise
results in a pointless build error:

drivers/built-in.o: In function `setup_earlycon':
:(.init.text+0x2c4c): undefined reference to `uart_parse_earlycon'

This changes the Kconfig statement to only select the earlycon
code if the console is also enabled, like all the other drivers
do already.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 1d59b382f1c4 ("serial: fsl_lpuart: add earlycon support")
Cc: Stefan Agner <stefan@agner.ch>
---
 drivers/tty/serial/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 1aec4404062d..dbb8ac6afd40 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1539,13 +1539,13 @@ config SERIAL_FSL_LPUART
 	tristate "Freescale lpuart serial port support"
 	depends on HAS_DMA
 	select SERIAL_CORE
-	select SERIAL_EARLYCON
 	help
 	  Support for the on-chip lpuart on some Freescale SOCs.
 
 config SERIAL_FSL_LPUART_CONSOLE
 	bool "Console on Freescale lpuart serial port"
 	depends on SERIAL_FSL_LPUART=y
+	select SERIAL_EARLYCON
 	select SERIAL_CORE_CONSOLE
 	help
 	  If you have enabled the lpuart serial port on the Freescale SoCs,
-- 
2.1.0.rc2

[PATCH 2/6] serial: fsl-lpuart: move SERIAL_EARLYCON dependency to console

[Arnd Bergmann]

The newly added earlycon support for lpuart adds a
'select SERIAL_EARLYCON' statement for the tty driver, but that
only uses earlycon when console support is present, and otherwise
results in a pointless build error:

drivers/built-in.o: In function `setup_earlycon':
:(.init.text+0x2c4c): undefined reference to `uart_parse_earlycon'

This changes the Kconfig statement to only select the earlycon
code if the console is also enabled, like all the other drivers
do already.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 1d59b382f1c4 ("serial: fsl_lpuart: add earlycon support")
Cc: Stefan Agner <stefan@agner.ch>
---
 drivers/tty/serial/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 1aec4404062d..dbb8ac6afd40 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1539,13 +1539,13 @@ config SERIAL_FSL_LPUART
 	tristate "Freescale lpuart serial port support"
 	depends on HAS_DMA
 	select SERIAL_CORE
-	select SERIAL_EARLYCON
 	help
 	  Support for the on-chip lpuart on some Freescale SOCs.
 
 config SERIAL_FSL_LPUART_CONSOLE
 	bool "Console on Freescale lpuart serial port"
 	depends on SERIAL_FSL_LPUART=y
+	select SERIAL_EARLYCON
 	select SERIAL_CORE_CONSOLE
 	help
 	  If you have enabled the lpuart serial port on the Freescale SoCs,
-- 
2.1.0.rc2

[PATCH 3/6] serial: mid8250: select CONFIG_RATIONAL

[Arnd Bergmann]

The Intel MID support got split out from the PCI 8250 driver,
and that now causes a build error when no other driver selects
CONFIG_RATIONAL:

drivers/built-in.o: In function `mid8250_set_termios':
(.text+0x77418): undefined reference to `rational_best_approximation'

This adds an explicit 'select' like the combined driver had before.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d9eda9bab237 ("serial: 8250_pci: Intel MID UART support to its own driver")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/tty/serial/8250/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index e6f5e12a2d83..6412f1455beb 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -373,6 +373,7 @@ config SERIAL_8250_MID
 	depends on SERIAL_8250 && PCI
 	select HSU_DMA if SERIAL_8250_DMA
 	select HSU_DMA_PCI if X86_INTEL_MID
+	select RATIONAL
 	help
 	  Selecting this option will enable handling of the extra features
 	  present on the UART found on Intel Medfield SOC and various other
-- 
2.1.0.rc2

[PATCH 3/6] serial: mid8250: select CONFIG_RATIONAL

[Arnd Bergmann]

The Intel MID support got split out from the PCI 8250 driver,
and that now causes a build error when no other driver selects
CONFIG_RATIONAL:

drivers/built-in.o: In function `mid8250_set_termios':
(.text+0x77418): undefined reference to `rational_best_approximation'

This adds an explicit 'select' like the combined driver had before.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d9eda9bab237 ("serial: 8250_pci: Intel MID UART support to its own driver")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/tty/serial/8250/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index e6f5e12a2d83..6412f1455beb 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -373,6 +373,7 @@ config SERIAL_8250_MID
 	depends on SERIAL_8250 && PCI
 	select HSU_DMA if SERIAL_8250_DMA
 	select HSU_DMA_PCI if X86_INTEL_MID
+	select RATIONAL
 	help
 	  Selecting this option will enable handling of the extra features
 	  present on the UART found on Intel Medfield SOC and various other
-- 
2.1.0.rc2

[PATCH 3/6] serial: mid8250: select CONFIG_RATIONAL

[Arnd Bergmann]

The Intel MID support got split out from the PCI 8250 driver,
and that now causes a build error when no other driver selects
CONFIG_RATIONAL:

drivers/built-in.o: In function `mid8250_set_termios':
(.text+0x77418): undefined reference to `rational_best_approximation'

This adds an explicit 'select' like the combined driver had before.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d9eda9bab237 ("serial: 8250_pci: Intel MID UART support to its own driver")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/tty/serial/8250/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index e6f5e12a2d83..6412f1455beb 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -373,6 +373,7 @@ config SERIAL_8250_MID
 	depends on SERIAL_8250 && PCI
 	select HSU_DMA if SERIAL_8250_DMA
 	select HSU_DMA_PCI if X86_INTEL_MID
+	select RATIONAL
 	help
 	  Selecting this option will enable handling of the extra features
 	  present on the UART found on Intel Medfield SOC and various other
-- 
2.1.0.rc2

[PATCH 4/6] serial: remove NWP serial support

[Arnd Bergmann]

The NWP serial driver is no longer needed, as the two users of
this hardware have migrated to a much faster generation hardware,
see https://en.wikipedia.org/wiki/QPACE2 for the replacement.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Krill <ben@codiert.org>
Cc: linuxppc-dev@lists.ozlabs.org
---
 drivers/tty/serial/Kconfig       |  19 +-
 drivers/tty/serial/Makefile      |   1 -
 drivers/tty/serial/nwpserial.c   | 477 ---------------------------------------
 drivers/tty/serial/of_serial.c   |  14 --
 include/linux/nwpserial.h        |  18 --
 include/uapi/linux/serial_core.h |   2 +-
 6 files changed, 2 insertions(+), 529 deletions(-)
 delete mode 100644 drivers/tty/serial/nwpserial.c
 delete mode 100644 include/linux/nwpserial.h

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index dbb8ac6afd40..a9c2200fd528 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1097,7 +1097,7 @@ config SERIAL_NETX_CONSOLE
 config SERIAL_OF_PLATFORM
 	tristate "Serial port on Open Firmware platform bus"
 	depends on OF
-	depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL
+	depends on SERIAL_8250
 	help
 	  If you have a PowerPC based system that has serial ports
 	  on a platform specific bus, you should enable this option.
@@ -1131,23 +1131,6 @@ config SERIAL_OMAP_CONSOLE
 	  your boot loader about how to pass options to the kernel at
 	  boot time.)
 
-config SERIAL_OF_PLATFORM_NWPSERIAL
-	tristate "NWP serial port driver"
-	depends on PPC_DCR
-	select SERIAL_OF_PLATFORM
-	select SERIAL_CORE_CONSOLE
-	select SERIAL_CORE
-	help
-	  This driver supports the cell network processor nwp serial
-	  device.
-
-config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
-	bool "Console on NWP serial port"
-	depends on SERIAL_OF_PLATFORM_NWPSERIAL=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Support for Console on the NWP serial ports.
-
 config SERIAL_LANTIQ
 	bool "Lantiq serial driver"
 	depends on LANTIQ
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 5ab41119b3dc..ee8893317433 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -64,7 +64,6 @@ obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
 obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
-obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
 obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o
 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
 obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c
deleted file mode 100644
index 5da7622e88c3..000000000000
--- a/drivers/tty/serial/nwpserial.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- *  Serial Port driver for a NWP uart device
- *
- *    Copyright (C) 2008 IBM Corp., Benjamin Krill <ben@codiert.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/console.h>
-#include <linux/serial.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_core.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/irqreturn.h>
-#include <linux/mutex.h>
-#include <linux/of_platform.h>
-#include <linux/of_device.h>
-#include <linux/nwpserial.h>
-#include <linux/delay.h>
-#include <asm/prom.h>
-#include <asm/dcr.h>
-
-#define NWPSERIAL_NR               2
-
-#define NWPSERIAL_STATUS_RXVALID 0x1
-#define NWPSERIAL_STATUS_TXFULL  0x2
-
-struct nwpserial_port {
-	struct uart_port port;
-	dcr_host_t dcr_host;
-	unsigned int ier;
-	unsigned int mcr;
-};
-
-static DEFINE_MUTEX(nwpserial_mutex);
-static struct nwpserial_port nwpserial_ports[NWPSERIAL_NR];
-
-static void wait_for_bits(struct nwpserial_port *up, int bits)
-{
-	unsigned int status, tmout = 10000;
-
-	/* Wait up to 10ms for the character(s) to be sent. */
-	do {
-		status = dcr_read(up->dcr_host, UART_LSR);
-
-		if (--tmout == 0)
-			break;
-		udelay(1);
-	} while ((status & bits) != bits);
-}
-
-#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
-static void nwpserial_console_putchar(struct uart_port *port, int c)
-{
-	struct nwpserial_port *up;
-	up = container_of(port, struct nwpserial_port, port);
-	/* check if tx buffer is full */
-	wait_for_bits(up, UART_LSR_THRE);
-	dcr_write(up->dcr_host, UART_TX, c);
-	up->port.icount.tx++;
-}
-
-static void
-nwpserial_console_write(struct console *co, const char *s, unsigned int count)
-{
-	struct nwpserial_port *up = &nwpserial_ports[co->index];
-	unsigned long flags;
-	int locked = 1;
-
-	if (oops_in_progress)
-		locked = spin_trylock_irqsave(&up->port.lock, flags);
-	else
-		spin_lock_irqsave(&up->port.lock, flags);
-
-	/* save and disable interrupt */
-	up->ier = dcr_read(up->dcr_host, UART_IER);
-	dcr_write(up->dcr_host, UART_IER, up->ier & ~UART_IER_RDI);
-
-	uart_console_write(&up->port, s, count, nwpserial_console_putchar);
-
-	/* wait for transmitter to become empty */
-	while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0)
-		cpu_relax();
-
-	/* restore interrupt state */
-	dcr_write(up->dcr_host, UART_IER, up->ier);
-
-	if (locked)
-		spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-static struct uart_driver nwpserial_reg;
-static struct console nwpserial_console = {
-	.name		= "ttySQ",
-	.write		= nwpserial_console_write,
-	.device		= uart_console_device,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-	.data		= &nwpserial_reg,
-};
-#define NWPSERIAL_CONSOLE	(&nwpserial_console)
-#else
-#define NWPSERIAL_CONSOLE	NULL
-#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */
-
-/**************************************************************************/
-
-static int nwpserial_request_port(struct uart_port *port)
-{
-	return 0;
-}
-
-static void nwpserial_release_port(struct uart_port *port)
-{
-	/* N/A */
-}
-
-static void nwpserial_config_port(struct uart_port *port, int flags)
-{
-	port->type = PORT_NWPSERIAL;
-}
-
-static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
-{
-	struct nwpserial_port *up = dev_id;
-	struct tty_port *port = &up->port.state->port;
-	irqreturn_t ret;
-	unsigned int iir;
-	unsigned char ch;
-
-	spin_lock(&up->port.lock);
-
-	/* check if the uart was the interrupt source. */
-	iir = dcr_read(up->dcr_host, UART_IIR);
-	if (!iir) {
-		ret = IRQ_NONE;
-		goto out;
-	}
-
-	do {
-		up->port.icount.rx++;
-		ch = dcr_read(up->dcr_host, UART_RX);
-		if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID)
-			tty_insert_flip_char(port, ch, TTY_NORMAL);
-	} while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR);
-
-	spin_unlock(&up->port.lock);
-	tty_flip_buffer_push(port);
-	spin_lock(&up->port.lock);
-
-	ret = IRQ_HANDLED;
-
-	/* clear interrupt */
-	dcr_write(up->dcr_host, UART_IIR, 1);
-out:
-	spin_unlock(&up->port.lock);
-	return ret;
-}
-
-static int nwpserial_startup(struct uart_port *port)
-{
-	struct nwpserial_port *up;
-	int err;
-
-	up = container_of(port, struct nwpserial_port, port);
-
-	/* disable flow control by default */
-	up->mcr = dcr_read(up->dcr_host, UART_MCR) & ~UART_MCR_AFE;
-	dcr_write(up->dcr_host, UART_MCR, up->mcr);
-
-	/* register interrupt handler */
-	err = request_irq(up->port.irq, nwpserial_interrupt,
-			IRQF_SHARED, "nwpserial", up);
-	if (err)
-		return err;
-
-	/* enable interrupts */
-	up->ier = UART_IER_RDI;
-	dcr_write(up->dcr_host, UART_IER, up->ier);
-
-	/* enable receiving */
-	up->port.ignore_status_mask &= ~NWPSERIAL_STATUS_RXVALID;
-
-	return 0;
-}
-
-static void nwpserial_shutdown(struct uart_port *port)
-{
-	struct nwpserial_port *up;
-	up = container_of(port, struct nwpserial_port, port);
-
-	/* disable receiving */
-	up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID;
-
-	/* disable interrupts from this port */
-	up->ier = 0;
-	dcr_write(up->dcr_host, UART_IER, up->ier);
-
-	/* free irq */
-	free_irq(up->port.irq, up);
-}
-
-static int nwpserial_verify_port(struct uart_port *port,
-			struct serial_struct *ser)
-{
-	return -EINVAL;
-}
-
-static const char *nwpserial_type(struct uart_port *port)
-{
-	return port->type == PORT_NWPSERIAL ? "nwpserial" : NULL;
-}
-
-static void nwpserial_set_termios(struct uart_port *port,
-			struct ktermios *termios, struct ktermios *old)
-{
-	struct nwpserial_port *up;
-	up = container_of(port, struct nwpserial_port, port);
-
-	up->port.read_status_mask = NWPSERIAL_STATUS_RXVALID
-				| NWPSERIAL_STATUS_TXFULL;
-
-	up->port.ignore_status_mask = 0;
-	/* ignore all characters if CREAD is not set */
-	if ((termios->c_cflag & CREAD) == 0)
-		up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID;
-
-	/* Copy back the old hardware settings */
-	if (old)
-		tty_termios_copy_hw(termios, old);
-}
-
-static void nwpserial_break_ctl(struct uart_port *port, int ctl)
-{
-	/* N/A */
-}
-
-static void nwpserial_stop_rx(struct uart_port *port)
-{
-	struct nwpserial_port *up;
-	up = container_of(port, struct nwpserial_port, port);
-	/* don't forward any more data (like !CREAD) */
-	up->port.ignore_status_mask = NWPSERIAL_STATUS_RXVALID;
-}
-
-static void nwpserial_putchar(struct nwpserial_port *up, unsigned char c)
-{
-	/* check if tx buffer is full */
-	wait_for_bits(up, UART_LSR_THRE);
-	dcr_write(up->dcr_host, UART_TX, c);
-	up->port.icount.tx++;
-}
-
-static void nwpserial_start_tx(struct uart_port *port)
-{
-	struct nwpserial_port *up;
-	struct circ_buf *xmit;
-	up = container_of(port, struct nwpserial_port, port);
-	xmit  = &up->port.state->xmit;
-
-	if (port->x_char) {
-		nwpserial_putchar(up, up->port.x_char);
-		port->x_char = 0;
-	}
-
-	while (!(uart_circ_empty(xmit) || uart_tx_stopped(&up->port))) {
-		nwpserial_putchar(up, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
-	}
-}
-
-static unsigned int nwpserial_get_mctrl(struct uart_port *port)
-{
-	return 0;
-}
-
-static void nwpserial_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-	/* N/A */
-}
-
-static void nwpserial_stop_tx(struct uart_port *port)
-{
-	/* N/A */
-}
-
-static unsigned int nwpserial_tx_empty(struct uart_port *port)
-{
-	struct nwpserial_port *up;
-	unsigned long flags;
-	int ret;
-	up = container_of(port, struct nwpserial_port, port);
-
-	spin_lock_irqsave(&up->port.lock, flags);
-	ret = dcr_read(up->dcr_host, UART_LSR);
-	spin_unlock_irqrestore(&up->port.lock, flags);
-
-	return ret & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
-}
-
-static struct uart_ops nwpserial_pops = {
-	.tx_empty     = nwpserial_tx_empty,
-	.set_mctrl    = nwpserial_set_mctrl,
-	.get_mctrl    = nwpserial_get_mctrl,
-	.stop_tx      = nwpserial_stop_tx,
-	.start_tx     = nwpserial_start_tx,
-	.stop_rx      = nwpserial_stop_rx,
-	.break_ctl    = nwpserial_break_ctl,
-	.startup      = nwpserial_startup,
-	.shutdown     = nwpserial_shutdown,
-	.set_termios  = nwpserial_set_termios,
-	.type         = nwpserial_type,
-	.release_port = nwpserial_release_port,
-	.request_port = nwpserial_request_port,
-	.config_port  = nwpserial_config_port,
-	.verify_port  = nwpserial_verify_port,
-};
-
-static struct uart_driver nwpserial_reg = {
-	.owner       = THIS_MODULE,
-	.driver_name = "nwpserial",
-	.dev_name    = "ttySQ",
-	.major       = TTY_MAJOR,
-	.minor       = 68,
-	.nr          = NWPSERIAL_NR,
-	.cons        = NWPSERIAL_CONSOLE,
-};
-
-int nwpserial_register_port(struct uart_port *port)
-{
-	struct nwpserial_port *up = NULL;
-	int ret = -1;
-	int i;
-	static int first = 1;
-	int dcr_len;
-	int dcr_base;
-	struct device_node *dn;
-
-	mutex_lock(&nwpserial_mutex);
-
-	dn = port->dev->of_node;
-	if (dn == NULL)
-		goto out;
-
-	/* get dcr base. */
-	dcr_base = dcr_resource_start(dn, 0);
-
-	/* find matching entry */
-	for (i = 0; i < NWPSERIAL_NR; i++)
-		if (nwpserial_ports[i].port.iobase == dcr_base) {
-			up = &nwpserial_ports[i];
-			break;
-		}
-
-	/* we didn't find a mtching entry, search for a free port */
-	if (up == NULL)
-		for (i = 0; i < NWPSERIAL_NR; i++)
-			if (nwpserial_ports[i].port.type == PORT_UNKNOWN &&
-				nwpserial_ports[i].port.iobase == 0) {
-				up = &nwpserial_ports[i];
-				break;
-			}
-
-	if (up == NULL) {
-		ret = -EBUSY;
-		goto out;
-	}
-
-	if (first)
-		uart_register_driver(&nwpserial_reg);
-	first = 0;
-
-	up->port.membase      = port->membase;
-	up->port.irq          = port->irq;
-	up->port.uartclk      = port->uartclk;
-	up->port.fifosize     = port->fifosize;
-	up->port.regshift     = port->regshift;
-	up->port.iotype       = port->iotype;
-	up->port.flags        = port->flags;
-	up->port.mapbase      = port->mapbase;
-	up->port.private_data = port->private_data;
-
-	if (port->dev)
-		up->port.dev = port->dev;
-
-	if (up->port.iobase != dcr_base) {
-		up->port.ops          = &nwpserial_pops;
-		up->port.fifosize     = 16;
-
-		spin_lock_init(&up->port.lock);
-
-		up->port.iobase = dcr_base;
-		dcr_len = dcr_resource_len(dn, 0);
-
-		up->dcr_host = dcr_map(dn, dcr_base, dcr_len);
-		if (!DCR_MAP_OK(up->dcr_host)) {
-			printk(KERN_ERR "Cannot map DCR resources for NWPSERIAL");
-			goto out;
-		}
-	}
-
-	ret = uart_add_one_port(&nwpserial_reg, &up->port);
-	if (ret == 0)
-		ret = up->port.line;
-
-out:
-	mutex_unlock(&nwpserial_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(nwpserial_register_port);
-
-void nwpserial_unregister_port(int line)
-{
-	struct nwpserial_port *up = &nwpserial_ports[line];
-	mutex_lock(&nwpserial_mutex);
-	uart_remove_one_port(&nwpserial_reg, &up->port);
-
-	up->port.type = PORT_UNKNOWN;
-
-	mutex_unlock(&nwpserial_mutex);
-}
-EXPORT_SYMBOL(nwpserial_unregister_port);
-
-#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
-static int __init nwpserial_console_init(void)
-{
-	struct nwpserial_port *up = NULL;
-	struct device_node *dn;
-	const char *name;
-	int dcr_base;
-	int dcr_len;
-	int i;
-
-	/* search for a free port */
-	for (i = 0; i < NWPSERIAL_NR; i++)
-		if (nwpserial_ports[i].port.type == PORT_UNKNOWN) {
-			up = &nwpserial_ports[i];
-			break;
-		}
-
-	if (up == NULL)
-		return -1;
-
-	name = of_get_property(of_chosen, "linux,stdout-path", NULL);
-	if (name == NULL)
-		return -1;
-
-	dn = of_find_node_by_path(name);
-	if (!dn)
-		return -1;
-
-	spin_lock_init(&up->port.lock);
-	up->port.ops = &nwpserial_pops;
-	up->port.type = PORT_NWPSERIAL;
-	up->port.fifosize = 16;
-
-	dcr_base = dcr_resource_start(dn, 0);
-	dcr_len = dcr_resource_len(dn, 0);
-	up->port.iobase = dcr_base;
-
-	up->dcr_host = dcr_map(dn, dcr_base, dcr_len);
-	if (!DCR_MAP_OK(up->dcr_host)) {
-		printk("Cannot map DCR resources for SERIAL");
-		return -1;
-	}
-	register_console(&nwpserial_console);
-	return 0;
-}
-console_initcall(nwpserial_console_init);
-#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index de5029649795..276c804e7eb4 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -213,11 +213,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 		break;
 	}
 #endif
-#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
-	case PORT_NWPSERIAL:
-		ret = nwpserial_register_port(&port);
-		break;
-#endif
 	default:
 		/* need to add code for these */
 	case PORT_UNKNOWN:
@@ -250,11 +245,6 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
 		serial8250_unregister_port(info->line);
 		break;
 #endif
-#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
-	case PORT_NWPSERIAL:
-		nwpserial_unregister_port(info->line);
-		break;
-#endif
 	default:
 		/* need to add code for these */
 		break;
@@ -353,10 +343,6 @@ static const struct of_device_id of_platform_serial_table[] = {
 		.data = (void *)PORT_XSCALE, },
 	{ .compatible = "mrvl,pxa-uart",
 		.data = (void *)PORT_XSCALE, },
-#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
-	{ .compatible = "ibm,qpace-nwp-serial",
-		.data = (void *)PORT_NWPSERIAL, },
-#endif
 	{ /* end of list */ },
 };
 MODULE_DEVICE_TABLE(of, of_platform_serial_table);
diff --git a/include/linux/nwpserial.h b/include/linux/nwpserial.h
deleted file mode 100644
index 9acb21572eaf..000000000000
--- a/include/linux/nwpserial.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  Serial Port driver for a NWP uart device
- *
- *    Copyright (C) 2008 IBM Corp., Benjamin Krill <ben@codiert.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-#ifndef _NWPSERIAL_H
-#define _NWPSERIAL_H
-
-int nwpserial_register_port(struct uart_port *port);
-void nwpserial_unregister_port(int line);
-
-#endif /* _NWPSERIAL_H */
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 93ba148f923e..3e5d757407fb 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -176,7 +176,7 @@
 
 #define PORT_S3C6400	84
 
-/* NWPSERIAL */
+/* NWPSERIAL, now removed */
 #define PORT_NWPSERIAL	85
 
 /* MAX3100 */
-- 
2.1.0.rc2

[PATCH 4/6] serial: remove NWP serial support

[Arnd Bergmann]

The NWP serial driver is no longer needed, as the two users of
this hardware have migrated to a much faster generation hardware,
see https://en.wikipedia.org/wiki/QPACE2 for the replacement.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Krill <ben@codiert.org>
Cc: linuxppc-dev at lists.ozlabs.org
---
 drivers/tty/serial/Kconfig       |  19 +-
 drivers/tty/serial/Makefile      |   1 -
 drivers/tty/serial/nwpserial.c   | 477 ---------------------------------------
 drivers/tty/serial/of_serial.c   |  14 --
 include/linux/nwpserial.h        |  18 --
 include/uapi/linux/serial_core.h |   2 +-
 6 files changed, 2 insertions(+), 529 deletions(-)
 delete mode 100644 drivers/tty/serial/nwpserial.c
 delete mode 100644 include/linux/nwpserial.h

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index dbb8ac6afd40..a9c2200fd528 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1097,7 +1097,7 @@ config SERIAL_NETX_CONSOLE
 config SERIAL_OF_PLATFORM
 	tristate "Serial port on Open Firmware platform bus"
 	depends on OF
-	depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL
+	depends on SERIAL_8250
 	help
 	  If you have a PowerPC based system that has serial ports
 	  on a platform specific bus, you should enable this option.
@@ -1131,23 +1131,6 @@ config SERIAL_OMAP_CONSOLE
 	  your boot loader about how to pass options to the kernel at
 	  boot time.)
 
-config SERIAL_OF_PLATFORM_NWPSERIAL
-	tristate "NWP serial port driver"
-	depends on PPC_DCR
-	select SERIAL_OF_PLATFORM
-	select SERIAL_CORE_CONSOLE
-	select SERIAL_CORE
-	help
-	  This driver supports the cell network processor nwp serial
-	  device.
-
-config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
-	bool "Console on NWP serial port"
-	depends on SERIAL_OF_PLATFORM_NWPSERIAL=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Support for Console on the NWP serial ports.
-
 config SERIAL_LANTIQ
 	bool "Lantiq serial driver"
 	depends on LANTIQ
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 5ab41119b3dc..ee8893317433 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -64,7 +64,6 @@ obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
 obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
-obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
 obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o
 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
 obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c
deleted file mode 100644
index 5da7622e88c3..000000000000
--- a/drivers/tty/serial/nwpserial.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- *  Serial Port driver for a NWP uart device
- *
- *    Copyright (C) 2008 IBM Corp., Benjamin Krill <ben@codiert.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/console.h>
-#include <linux/serial.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_core.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/irqreturn.h>
-#include <linux/mutex.h>
-#include <linux/of_platform.h>
-#include <linux/of_device.h>
-#include <linux/nwpserial.h>
-#include <linux/delay.h>
-#include <asm/prom.h>
-#include <asm/dcr.h>
-
-#define NWPSERIAL_NR               2
-
-#define NWPSERIAL_STATUS_RXVALID 0x1
-#define NWPSERIAL_STATUS_TXFULL  0x2
-
-struct nwpserial_port {
-	struct uart_port port;
-	dcr_host_t dcr_host;
-	unsigned int ier;
-	unsigned int mcr;
-};
-
-static DEFINE_MUTEX(nwpserial_mutex);
-static struct nwpserial_port nwpserial_ports[NWPSERIAL_NR];
-
-static void wait_for_bits(struct nwpserial_port *up, int bits)
-{
-	unsigned int status, tmout = 10000;
-
-	/* Wait up to 10ms for the character(s) to be sent. */
-	do {
-		status = dcr_read(up->dcr_host, UART_LSR);
-
-		if (--tmout == 0)
-			break;
-		udelay(1);
-	} while ((status & bits) != bits);
-}
-
-#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
-static void nwpserial_console_putchar(struct uart_port *port, int c)
-{
-	struct nwpserial_port *up;
-	up = container_of(port, struct nwpserial_port, port);
-	/* check if tx buffer is full */
-	wait_for_bits(up, UART_LSR_THRE);
-	dcr_write(up->dcr_host, UART_TX, c);
-	up->port.icount.tx++;
-}
-
-static void
-nwpserial_console_write(struct console *co, const char *s, unsigned int count)
-{
-	struct nwpserial_port *up = &nwpserial_ports[co->index];
-	unsigned long flags;
-	int locked = 1;
-
-	if (oops_in_progress)
-		locked = spin_trylock_irqsave(&up->port.lock, flags);
-	else
-		spin_lock_irqsave(&up->port.lock, flags);
-
-	/* save and disable interrupt */
-	up->ier = dcr_read(up->dcr_host, UART_IER);
-	dcr_write(up->dcr_host, UART_IER, up->ier & ~UART_IER_RDI);
-
-	uart_console_write(&up->port, s, count, nwpserial_console_putchar);
-
-	/* wait for transmitter to become empty */
-	while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0)
-		cpu_relax();
-
-	/* restore interrupt state */
-	dcr_write(up->dcr_host, UART_IER, up->ier);
-
-	if (locked)
-		spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-static struct uart_driver nwpserial_reg;
-static struct console nwpserial_console = {
-	.name		= "ttySQ",
-	.write		= nwpserial_console_write,
-	.device		= uart_console_device,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-	.data		= &nwpserial_reg,
-};
-#define NWPSERIAL_CONSOLE	(&nwpserial_console)
-#else
-#define NWPSERIAL_CONSOLE	NULL
-#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */
-
-/**************************************************************************/
-
-static int nwpserial_request_port(struct uart_port *port)
-{
-	return 0;
-}
-
-static void nwpserial_release_port(struct uart_port *port)
-{
-	/* N/A */
-}
-
-static void nwpserial_config_port(struct uart_port *port, int flags)
-{
-	port->type = PORT_NWPSERIAL;
-}
-
-static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
-{
-	struct nwpserial_port *up = dev_id;
-	struct tty_port *port = &up->port.state->port;
-	irqreturn_t ret;
-	unsigned int iir;
-	unsigned char ch;
-
-	spin_lock(&up->port.lock);
-
-	/* check if the uart was the interrupt source. */
-	iir = dcr_read(up->dcr_host, UART_IIR);
-	if (!iir) {
-		ret = IRQ_NONE;
-		goto out;
-	}
-
-	do {
-		up->port.icount.rx++;
-		ch = dcr_read(up->dcr_host, UART_RX);
-		if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID)
-			tty_insert_flip_char(port, ch, TTY_NORMAL);
-	} while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR);
-
-	spin_unlock(&up->port.lock);
-	tty_flip_buffer_push(port);
-	spin_lock(&up->port.lock);
-
-	ret = IRQ_HANDLED;
-
-	/* clear interrupt */
-	dcr_write(up->dcr_host, UART_IIR, 1);
-out:
-	spin_unlock(&up->port.lock);
-	return ret;
-}
-
-static int nwpserial_startup(struct uart_port *port)
-{
-	struct nwpserial_port *up;
-	int err;
-
-	up = container_of(port, struct nwpserial_port, port);
-
-	/* disable flow control by default */
-	up->mcr = dcr_read(up->dcr_host, UART_MCR) & ~UART_MCR_AFE;
-	dcr_write(up->dcr_host, UART_MCR, up->mcr);
-
-	/* register interrupt handler */
-	err = request_irq(up->port.irq, nwpserial_interrupt,
-			IRQF_SHARED, "nwpserial", up);
-	if (err)
-		return err;
-
-	/* enable interrupts */
-	up->ier = UART_IER_RDI;
-	dcr_write(up->dcr_host, UART_IER, up->ier);
-
-	/* enable receiving */
-	up->port.ignore_status_mask &= ~NWPSERIAL_STATUS_RXVALID;
-
-	return 0;
-}
-
-static void nwpserial_shutdown(struct uart_port *port)
-{
-	struct nwpserial_port *up;
-	up = container_of(port, struct nwpserial_port, port);
-
-	/* disable receiving */
-	up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID;
-
-	/* disable interrupts from this port */
-	up->ier = 0;
-	dcr_write(up->dcr_host, UART_IER, up->ier);
-
-	/* free irq */
-	free_irq(up->port.irq, up);
-}
-
-static int nwpserial_verify_port(struct uart_port *port,
-			struct serial_struct *ser)
-{
-	return -EINVAL;
-}
-
-static const char *nwpserial_type(struct uart_port *port)
-{
-	return port->type == PORT_NWPSERIAL ? "nwpserial" : NULL;
-}
-
-static void nwpserial_set_termios(struct uart_port *port,
-			struct ktermios *termios, struct ktermios *old)
-{
-	struct nwpserial_port *up;
-	up = container_of(port, struct nwpserial_port, port);
-
-	up->port.read_status_mask = NWPSERIAL_STATUS_RXVALID
-				| NWPSERIAL_STATUS_TXFULL;
-
-	up->port.ignore_status_mask = 0;
-	/* ignore all characters if CREAD is not set */
-	if ((termios->c_cflag & CREAD) == 0)
-		up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID;
-
-	/* Copy back the old hardware settings */
-	if (old)
-		tty_termios_copy_hw(termios, old);
-}
-
-static void nwpserial_break_ctl(struct uart_port *port, int ctl)
-{
-	/* N/A */
-}
-
-static void nwpserial_stop_rx(struct uart_port *port)
-{
-	struct nwpserial_port *up;
-	up = container_of(port, struct nwpserial_port, port);
-	/* don't forward any more data (like !CREAD) */
-	up->port.ignore_status_mask = NWPSERIAL_STATUS_RXVALID;
-}
-
-static void nwpserial_putchar(struct nwpserial_port *up, unsigned char c)
-{
-	/* check if tx buffer is full */
-	wait_for_bits(up, UART_LSR_THRE);
-	dcr_write(up->dcr_host, UART_TX, c);
-	up->port.icount.tx++;
-}
-
-static void nwpserial_start_tx(struct uart_port *port)
-{
-	struct nwpserial_port *up;
-	struct circ_buf *xmit;
-	up = container_of(port, struct nwpserial_port, port);
-	xmit  = &up->port.state->xmit;
-
-	if (port->x_char) {
-		nwpserial_putchar(up, up->port.x_char);
-		port->x_char = 0;
-	}
-
-	while (!(uart_circ_empty(xmit) || uart_tx_stopped(&up->port))) {
-		nwpserial_putchar(up, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
-	}
-}
-
-static unsigned int nwpserial_get_mctrl(struct uart_port *port)
-{
-	return 0;
-}
-
-static void nwpserial_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-	/* N/A */
-}
-
-static void nwpserial_stop_tx(struct uart_port *port)
-{
-	/* N/A */
-}
-
-static unsigned int nwpserial_tx_empty(struct uart_port *port)
-{
-	struct nwpserial_port *up;
-	unsigned long flags;
-	int ret;
-	up = container_of(port, struct nwpserial_port, port);
-
-	spin_lock_irqsave(&up->port.lock, flags);
-	ret = dcr_read(up->dcr_host, UART_LSR);
-	spin_unlock_irqrestore(&up->port.lock, flags);
-
-	return ret & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
-}
-
-static struct uart_ops nwpserial_pops = {
-	.tx_empty     = nwpserial_tx_empty,
-	.set_mctrl    = nwpserial_set_mctrl,
-	.get_mctrl    = nwpserial_get_mctrl,
-	.stop_tx      = nwpserial_stop_tx,
-	.start_tx     = nwpserial_start_tx,
-	.stop_rx      = nwpserial_stop_rx,
-	.break_ctl    = nwpserial_break_ctl,
-	.startup      = nwpserial_startup,
-	.shutdown     = nwpserial_shutdown,
-	.set_termios  = nwpserial_set_termios,
-	.type         = nwpserial_type,
-	.release_port = nwpserial_release_port,
-	.request_port = nwpserial_request_port,
-	.config_port  = nwpserial_config_port,
-	.verify_port  = nwpserial_verify_port,
-};
-
-static struct uart_driver nwpserial_reg = {
-	.owner       = THIS_MODULE,
-	.driver_name = "nwpserial",
-	.dev_name    = "ttySQ",
-	.major       = TTY_MAJOR,
-	.minor       = 68,
-	.nr          = NWPSERIAL_NR,
-	.cons        = NWPSERIAL_CONSOLE,
-};
-
-int nwpserial_register_port(struct uart_port *port)
-{
-	struct nwpserial_port *up = NULL;
-	int ret = -1;
-	int i;
-	static int first = 1;
-	int dcr_len;
-	int dcr_base;
-	struct device_node *dn;
-
-	mutex_lock(&nwpserial_mutex);
-
-	dn = port->dev->of_node;
-	if (dn == NULL)
-		goto out;
-
-	/* get dcr base. */
-	dcr_base = dcr_resource_start(dn, 0);
-
-	/* find matching entry */
-	for (i = 0; i < NWPSERIAL_NR; i++)
-		if (nwpserial_ports[i].port.iobase == dcr_base) {
-			up = &nwpserial_ports[i];
-			break;
-		}
-
-	/* we didn't find a mtching entry, search for a free port */
-	if (up == NULL)
-		for (i = 0; i < NWPSERIAL_NR; i++)
-			if (nwpserial_ports[i].port.type == PORT_UNKNOWN &&
-				nwpserial_ports[i].port.iobase == 0) {
-				up = &nwpserial_ports[i];
-				break;
-			}
-
-	if (up == NULL) {
-		ret = -EBUSY;
-		goto out;
-	}
-
-	if (first)
-		uart_register_driver(&nwpserial_reg);
-	first = 0;
-
-	up->port.membase      = port->membase;
-	up->port.irq          = port->irq;
-	up->port.uartclk      = port->uartclk;
-	up->port.fifosize     = port->fifosize;
-	up->port.regshift     = port->regshift;
-	up->port.iotype       = port->iotype;
-	up->port.flags        = port->flags;
-	up->port.mapbase      = port->mapbase;
-	up->port.private_data = port->private_data;
-
-	if (port->dev)
-		up->port.dev = port->dev;
-
-	if (up->port.iobase != dcr_base) {
-		up->port.ops          = &nwpserial_pops;
-		up->port.fifosize     = 16;
-
-		spin_lock_init(&up->port.lock);
-
-		up->port.iobase = dcr_base;
-		dcr_len = dcr_resource_len(dn, 0);
-
-		up->dcr_host = dcr_map(dn, dcr_base, dcr_len);
-		if (!DCR_MAP_OK(up->dcr_host)) {
-			printk(KERN_ERR "Cannot map DCR resources for NWPSERIAL");
-			goto out;
-		}
-	}
-
-	ret = uart_add_one_port(&nwpserial_reg, &up->port);
-	if (ret == 0)
-		ret = up->port.line;
-
-out:
-	mutex_unlock(&nwpserial_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(nwpserial_register_port);
-
-void nwpserial_unregister_port(int line)
-{
-	struct nwpserial_port *up = &nwpserial_ports[line];
-	mutex_lock(&nwpserial_mutex);
-	uart_remove_one_port(&nwpserial_reg, &up->port);
-
-	up->port.type = PORT_UNKNOWN;
-
-	mutex_unlock(&nwpserial_mutex);
-}
-EXPORT_SYMBOL(nwpserial_unregister_port);
-
-#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
-static int __init nwpserial_console_init(void)
-{
-	struct nwpserial_port *up = NULL;
-	struct device_node *dn;
-	const char *name;
-	int dcr_base;
-	int dcr_len;
-	int i;
-
-	/* search for a free port */
-	for (i = 0; i < NWPSERIAL_NR; i++)
-		if (nwpserial_ports[i].port.type == PORT_UNKNOWN) {
-			up = &nwpserial_ports[i];
-			break;
-		}
-
-	if (up == NULL)
-		return -1;
-
-	name = of_get_property(of_chosen, "linux,stdout-path", NULL);
-	if (name == NULL)
-		return -1;
-
-	dn = of_find_node_by_path(name);
-	if (!dn)
-		return -1;
-
-	spin_lock_init(&up->port.lock);
-	up->port.ops = &nwpserial_pops;
-	up->port.type = PORT_NWPSERIAL;
-	up->port.fifosize = 16;
-
-	dcr_base = dcr_resource_start(dn, 0);
-	dcr_len = dcr_resource_len(dn, 0);
-	up->port.iobase = dcr_base;
-
-	up->dcr_host = dcr_map(dn, dcr_base, dcr_len);
-	if (!DCR_MAP_OK(up->dcr_host)) {
-		printk("Cannot map DCR resources for SERIAL");
-		return -1;
-	}
-	register_console(&nwpserial_console);
-	return 0;
-}
-console_initcall(nwpserial_console_init);
-#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index de5029649795..276c804e7eb4 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -213,11 +213,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 		break;
 	}
 #endif
-#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
-	case PORT_NWPSERIAL:
-		ret = nwpserial_register_port(&port);
-		break;
-#endif
 	default:
 		/* need to add code for these */
 	case PORT_UNKNOWN:
@@ -250,11 +245,6 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
 		serial8250_unregister_port(info->line);
 		break;
 #endif
-#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
-	case PORT_NWPSERIAL:
-		nwpserial_unregister_port(info->line);
-		break;
-#endif
 	default:
 		/* need to add code for these */
 		break;
@@ -353,10 +343,6 @@ static const struct of_device_id of_platform_serial_table[] = {
 		.data = (void *)PORT_XSCALE, },
 	{ .compatible = "mrvl,pxa-uart",
 		.data = (void *)PORT_XSCALE, },
-#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
-	{ .compatible = "ibm,qpace-nwp-serial",
-		.data = (void *)PORT_NWPSERIAL, },
-#endif
 	{ /* end of list */ },
 };
 MODULE_DEVICE_TABLE(of, of_platform_serial_table);
diff --git a/include/linux/nwpserial.h b/include/linux/nwpserial.h
deleted file mode 100644
index 9acb21572eaf..000000000000
--- a/include/linux/nwpserial.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  Serial Port driver for a NWP uart device
- *
- *    Copyright (C) 2008 IBM Corp., Benjamin Krill <ben@codiert.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-#ifndef _NWPSERIAL_H
-#define _NWPSERIAL_H
-
-int nwpserial_register_port(struct uart_port *port);
-void nwpserial_unregister_port(int line);
-
-#endif /* _NWPSERIAL_H */
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 93ba148f923e..3e5d757407fb 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -176,7 +176,7 @@
 
 #define PORT_S3C6400	84
 
-/* NWPSERIAL */
+/* NWPSERIAL, now removed */
 #define PORT_NWPSERIAL	85
 
 /* MAX3100 */
-- 
2.1.0.rc2

[PATCH 5/6] serial: of: CONFIG_SERIAL_8250 is always set

[Arnd Bergmann]

The only other user of this code was the nwp-serial driver, but that
is now gone, so we can remove a couple of #ifdef statments in this
driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/tty/serial/of_serial.c | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 276c804e7eb4..7044eb2be91b 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -21,10 +21,6 @@
 #include <linux/nwpserial.h>
 #include <linux/clk.h>
 
-#ifdef CONFIG_SERIAL_8250_MODULE
-#define CONFIG_SERIAL_8250 CONFIG_SERIAL_8250_MODULE
-#endif
-
 #include "8250/8250.h"
 
 struct of_serial_info {
@@ -195,7 +191,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 		goto out;
 
 	switch (port_type) {
-#ifdef CONFIG_SERIAL_8250
 	case PORT_8250 ... PORT_MAX_8250:
 	{
 		struct uart_8250_port port8250;
@@ -212,7 +207,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 		ret = serial8250_register_8250_port(&port8250);
 		break;
 	}
-#endif
 	default:
 		/* need to add code for these */
 	case PORT_UNKNOWN:
@@ -240,11 +234,9 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
 {
 	struct of_serial_info *info = platform_get_drvdata(ofdev);
 	switch (info->type) {
-#ifdef CONFIG_SERIAL_8250
 	case PORT_8250 ... PORT_MAX_8250:
 		serial8250_unregister_port(info->line);
 		break;
-#endif
 	default:
 		/* need to add code for these */
 		break;
@@ -257,7 +249,6 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
-#ifdef CONFIG_SERIAL_8250
 static void of_serial_suspend_8250(struct of_serial_info *info)
 {
 	struct uart_8250_port *port8250 = serial8250_get_port(info->line);
@@ -278,15 +269,6 @@ static void of_serial_resume_8250(struct of_serial_info *info)
 
 	serial8250_resume_port(info->line);
 }
-#else
-static inline void of_serial_suspend_8250(struct of_serial_info *info)
-{
-}
-
-static inline void of_serial_resume_8250(struct of_serial_info *info)
-{
-}
-#endif
 
 static int of_serial_suspend(struct device *dev)
 {
-- 
2.1.0.rc2

[PATCH 5/6] serial: of: CONFIG_SERIAL_8250 is always set

[Arnd Bergmann]

The only other user of this code was the nwp-serial driver, but that
is now gone, so we can remove a couple of #ifdef statments in this
driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/tty/serial/of_serial.c | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 276c804e7eb4..7044eb2be91b 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -21,10 +21,6 @@
 #include <linux/nwpserial.h>
 #include <linux/clk.h>
 
-#ifdef CONFIG_SERIAL_8250_MODULE
-#define CONFIG_SERIAL_8250 CONFIG_SERIAL_8250_MODULE
-#endif
-
 #include "8250/8250.h"
 
 struct of_serial_info {
@@ -195,7 +191,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 		goto out;
 
 	switch (port_type) {
-#ifdef CONFIG_SERIAL_8250
 	case PORT_8250 ... PORT_MAX_8250:
 	{
 		struct uart_8250_port port8250;
@@ -212,7 +207,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 		ret = serial8250_register_8250_port(&port8250);
 		break;
 	}
-#endif
 	default:
 		/* need to add code for these */
 	case PORT_UNKNOWN:
@@ -240,11 +234,9 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
 {
 	struct of_serial_info *info = platform_get_drvdata(ofdev);
 	switch (info->type) {
-#ifdef CONFIG_SERIAL_8250
 	case PORT_8250 ... PORT_MAX_8250:
 		serial8250_unregister_port(info->line);
 		break;
-#endif
 	default:
 		/* need to add code for these */
 		break;
@@ -257,7 +249,6 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
-#ifdef CONFIG_SERIAL_8250
 static void of_serial_suspend_8250(struct of_serial_info *info)
 {
 	struct uart_8250_port *port8250 = serial8250_get_port(info->line);
@@ -278,15 +269,6 @@ static void of_serial_resume_8250(struct of_serial_info *info)
 
 	serial8250_resume_port(info->line);
 }
-#else
-static inline void of_serial_suspend_8250(struct of_serial_info *info)
-{
-}
-
-static inline void of_serial_resume_8250(struct of_serial_info *info)
-{
-}
-#endif
 
 static int of_serial_suspend(struct device *dev)
 {
-- 
2.1.0.rc2

[PATCH 6/6] serial: 8250: move of_serial code to 8250 directory

[Arnd Bergmann]

As the of-serial driver is now 8250 specific, we can move the
file to a more appropriate place in teh 8250 subdirectory and
adapt the Kconfig help text and file name.

I'm leaving the CONFIG_SERIAL_OF_PLATFORM symbol unchanged
to avoid breaking user configuration files unnecessarily.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/tty/serial/{of_serial.c => 8250/8250_of.c} |  0
 drivers/tty/serial/8250/Kconfig                    |  9 +++++++++
 drivers/tty/serial/8250/Makefile                   |  1 +
 drivers/tty/serial/Kconfig                         | 10 ----------
 drivers/tty/serial/Makefile                        |  1 -
 5 files changed, 10 insertions(+), 11 deletions(-)
 rename drivers/tty/serial/{of_serial.c => 8250/8250_of.c} (100%)

diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/8250/8250_of.c
similarity index 100%
rename from drivers/tty/serial/of_serial.c
rename to drivers/tty/serial/8250/8250_of.c
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 6412f1455beb..f8507d718dd4 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -378,3 +378,12 @@ config SERIAL_8250_MID
 	  Selecting this option will enable handling of the extra features
 	  present on the UART found on Intel Medfield SOC and various other
 	  Intel platforms.
+
+config SERIAL_OF_PLATFORM
+	tristate "Devicetree based probing for 8250 ports"
+	depends on SERIAL_8250 && OF
+	help
+	  This option is used for all 8250 compatible serial ports that
+	  are probed through devicetree, including Open Firmware based
+	  PowerPC systems and embedded systems on architectures using the
+	  flattened device tree format.
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index e177f8681ada..4ecb80d3549a 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -28,5 +28,6 @@ obj-$(CONFIG_SERIAL_8250_MT6577)	+= 8250_mtk.o
 obj-$(CONFIG_SERIAL_8250_UNIPHIER)	+= 8250_uniphier.o
 obj-$(CONFIG_SERIAL_8250_INGENIC)	+= 8250_ingenic.o
 obj-$(CONFIG_SERIAL_8250_MID)		+= 8250_mid.o
+obj-$(CONFIG_SERIAL_8250_OF)		+= 8250_of.o
 
 CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index a9c2200fd528..6879a5785be7 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1094,16 +1094,6 @@ config SERIAL_NETX_CONSOLE
 	  If you have enabled the serial port on the Hilscher NetX SoC
 	  you can make it the console by answering Y to this option.
 
-config SERIAL_OF_PLATFORM
-	tristate "Serial port on Open Firmware platform bus"
-	depends on OF
-	depends on SERIAL_8250
-	help
-	  If you have a PowerPC based system that has serial ports
-	  on a platform specific bus, you should enable this option.
-	  Currently, only 8250 compatible ports are supported, but
-	  others can easily be added.
-
 config SERIAL_OMAP
 	tristate "OMAP serial port support"
 	depends on ARCH_OMAP2PLUS
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index ee8893317433..b391c9b31960 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -63,7 +63,6 @@ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
 obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
-obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
 obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o
 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
 obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
-- 
2.1.0.rc2

[PATCH 6/6] serial: 8250: move of_serial code to 8250 directory

[Arnd Bergmann]

As the of-serial driver is now 8250 specific, we can move the
file to a more appropriate place in teh 8250 subdirectory and
adapt the Kconfig help text and file name.

I'm leaving the CONFIG_SERIAL_OF_PLATFORM symbol unchanged
to avoid breaking user configuration files unnecessarily.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/tty/serial/{of_serial.c => 8250/8250_of.c} |  0
 drivers/tty/serial/8250/Kconfig                    |  9 +++++++++
 drivers/tty/serial/8250/Makefile                   |  1 +
 drivers/tty/serial/Kconfig                         | 10 ----------
 drivers/tty/serial/Makefile                        |  1 -
 5 files changed, 10 insertions(+), 11 deletions(-)
 rename drivers/tty/serial/{of_serial.c => 8250/8250_of.c} (100%)

diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/8250/8250_of.c
similarity index 100%
rename from drivers/tty/serial/of_serial.c
rename to drivers/tty/serial/8250/8250_of.c
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 6412f1455beb..f8507d718dd4 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -378,3 +378,12 @@ config SERIAL_8250_MID
 	  Selecting this option will enable handling of the extra features
 	  present on the UART found on Intel Medfield SOC and various other
 	  Intel platforms.
+
+config SERIAL_OF_PLATFORM
+	tristate "Devicetree based probing for 8250 ports"
+	depends on SERIAL_8250 && OF
+	help
+	  This option is used for all 8250 compatible serial ports that
+	  are probed through devicetree, including Open Firmware based
+	  PowerPC systems and embedded systems on architectures using the
+	  flattened device tree format.
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index e177f8681ada..4ecb80d3549a 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -28,5 +28,6 @@ obj-$(CONFIG_SERIAL_8250_MT6577)	+= 8250_mtk.o
 obj-$(CONFIG_SERIAL_8250_UNIPHIER)	+= 8250_uniphier.o
 obj-$(CONFIG_SERIAL_8250_INGENIC)	+= 8250_ingenic.o
 obj-$(CONFIG_SERIAL_8250_MID)		+= 8250_mid.o
+obj-$(CONFIG_SERIAL_8250_OF)		+= 8250_of.o
 
 CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index a9c2200fd528..6879a5785be7 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1094,16 +1094,6 @@ config SERIAL_NETX_CONSOLE
 	  If you have enabled the serial port on the Hilscher NetX SoC
 	  you can make it the console by answering Y to this option.
 
-config SERIAL_OF_PLATFORM
-	tristate "Serial port on Open Firmware platform bus"
-	depends on OF
-	depends on SERIAL_8250
-	help
-	  If you have a PowerPC based system that has serial ports
-	  on a platform specific bus, you should enable this option.
-	  Currently, only 8250 compatible ports are supported, but
-	  others can easily be added.
-
 config SERIAL_OMAP
 	tristate "OMAP serial port support"
 	depends on ARCH_OMAP2PLUS
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index ee8893317433..b391c9b31960 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -63,7 +63,6 @@ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
 obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
-obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
 obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o
 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
 obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
-- 
2.1.0.rc2

[PATCH 6/6] serial: 8250: move of_serial code to 8250 directory

[Arnd Bergmann]

As the of-serial driver is now 8250 specific, we can move the
file to a more appropriate place in teh 8250 subdirectory and
adapt the Kconfig help text and file name.

I'm leaving the CONFIG_SERIAL_OF_PLATFORM symbol unchanged
to avoid breaking user configuration files unnecessarily.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/tty/serial/{of_serial.c => 8250/8250_of.c} |  0
 drivers/tty/serial/8250/Kconfig                    |  9 +++++++++
 drivers/tty/serial/8250/Makefile                   |  1 +
 drivers/tty/serial/Kconfig                         | 10 ----------
 drivers/tty/serial/Makefile                        |  1 -
 5 files changed, 10 insertions(+), 11 deletions(-)
 rename drivers/tty/serial/{of_serial.c => 8250/8250_of.c} (100%)

diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/8250/8250_of.c
similarity index 100%
rename from drivers/tty/serial/of_serial.c
rename to drivers/tty/serial/8250/8250_of.c
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 6412f1455beb..f8507d718dd4 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -378,3 +378,12 @@ config SERIAL_8250_MID
 	  Selecting this option will enable handling of the extra features
 	  present on the UART found on Intel Medfield SOC and various other
 	  Intel platforms.
+
+config SERIAL_OF_PLATFORM
+	tristate "Devicetree based probing for 8250 ports"
+	depends on SERIAL_8250 && OF
+	help
+	  This option is used for all 8250 compatible serial ports that
+	  are probed through devicetree, including Open Firmware based
+	  PowerPC systems and embedded systems on architectures using the
+	  flattened device tree format.
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index e177f8681ada..4ecb80d3549a 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -28,5 +28,6 @@ obj-$(CONFIG_SERIAL_8250_MT6577)	+= 8250_mtk.o
 obj-$(CONFIG_SERIAL_8250_UNIPHIER)	+= 8250_uniphier.o
 obj-$(CONFIG_SERIAL_8250_INGENIC)	+= 8250_ingenic.o
 obj-$(CONFIG_SERIAL_8250_MID)		+= 8250_mid.o
+obj-$(CONFIG_SERIAL_8250_OF)		+= 8250_of.o
 
 CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index a9c2200fd528..6879a5785be7 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1094,16 +1094,6 @@ config SERIAL_NETX_CONSOLE
 	  If you have enabled the serial port on the Hilscher NetX SoC
 	  you can make it the console by answering Y to this option.
 
-config SERIAL_OF_PLATFORM
-	tristate "Serial port on Open Firmware platform bus"
-	depends on OF
-	depends on SERIAL_8250
-	help
-	  If you have a PowerPC based system that has serial ports
-	  on a platform specific bus, you should enable this option.
-	  Currently, only 8250 compatible ports are supported, but
-	  others can easily be added.
-
 config SERIAL_OMAP
 	tristate "OMAP serial port support"
 	depends on ARCH_OMAP2PLUS
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index ee8893317433..b391c9b31960 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -63,7 +63,6 @@ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
 obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
-obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
 obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o
 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
 obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
-- 
2.1.0.rc2

Re: [PATCH 3/6] serial: mid8250: select CONFIG_RATIONAL

[Andy Shevchenko]

On Mon, 2015-11-16 at 16:48 +0100, Arnd Bergmann wrote:
> The Intel MID support got split out from the PCI 8250 driver,
> and that now causes a build error when no other driver selects
> CONFIG_RATIONAL:

Already published.
https://lkml.org/lkml/2015/11/12/272

It's not first time you send patches that already have been published.

I think you use some testing automation which doesn't take into
consideration what is sent in mailing lists.

> 
> drivers/built-in.o: In function `mid8250_set_termios':
> (.text+0x77418): undefined reference to `rational_best_approximation'
> 
> This adds an explicit 'select' like the combined driver had before.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Fixes: d9eda9bab237 ("serial: 8250_pci: Intel MID UART support to its
> own driver")
> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/tty/serial/8250/Kconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/tty/serial/8250/Kconfig
> b/drivers/tty/serial/8250/Kconfig
> index e6f5e12a2d83..6412f1455beb 100644
> --- a/drivers/tty/serial/8250/Kconfig
> +++ b/drivers/tty/serial/8250/Kconfig
> @@ -373,6 +373,7 @@ config SERIAL_8250_MID
>  	depends on SERIAL_8250 && PCI
>  	select HSU_DMA if SERIAL_8250_DMA
>  	select HSU_DMA_PCI if X86_INTEL_MID
> +	select RATIONAL
>  	help
>  	  Selecting this option will enable handling of the extra
> features
>  	  present on the UART found on Intel Medfield SOC and
> various other

-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

[PATCH 3/6] serial: mid8250: select CONFIG_RATIONAL

[Andy Shevchenko]

On Mon, 2015-11-16 at 16:48 +0100, Arnd Bergmann wrote:
> The Intel MID support got split out from the PCI 8250 driver,
> and that now causes a build error when no other driver selects
> CONFIG_RATIONAL:

Already published.
https://lkml.org/lkml/2015/11/12/272

It's not first time you send patches that already have been published.

I think you use some testing automation which doesn't take into
consideration what is sent in mailing lists.

> 
> drivers/built-in.o: In function `mid8250_set_termios':
> (.text+0x77418): undefined reference to `rational_best_approximation'
> 
> This adds an explicit 'select' like the combined driver had before.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Fixes: d9eda9bab237 ("serial: 8250_pci: Intel MID UART support to its
> own driver")
> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> ?drivers/tty/serial/8250/Kconfig | 1 +
> ?1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/tty/serial/8250/Kconfig
> b/drivers/tty/serial/8250/Kconfig
> index e6f5e12a2d83..6412f1455beb 100644
> --- a/drivers/tty/serial/8250/Kconfig
> +++ b/drivers/tty/serial/8250/Kconfig
> @@ -373,6 +373,7 @@ config SERIAL_8250_MID
> ?	depends on SERIAL_8250 && PCI
> ?	select HSU_DMA if SERIAL_8250_DMA
> ?	select HSU_DMA_PCI if X86_INTEL_MID
> +	select RATIONAL
> ?	help
> ?	??Selecting this option will enable handling of the extra
> features
> ?	??present on the UART found on Intel Medfield SOC and
> various other

-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

Re: [PATCH 3/6] serial: mid8250: select CONFIG_RATIONAL

[Arnd Bergmann]

On Monday 16 November 2015 18:56:02 Andy Shevchenko wrote:
> On Mon, 2015-11-16 at 16:48 +0100, Arnd Bergmann wrote:
> > The Intel MID support got split out from the PCI 8250 driver,
> > and that now causes a build error when no other driver selects
> > CONFIG_RATIONAL:
> 
> Already published.
> https://lkml.org/lkml/2015/11/12/272
> 
> It's not first time you send patches that already have been published.
> 
> I think you use some testing automation which doesn't take into
> consideration what is sent in mailing lists.

Correct, it also ignores whatever patches other people have in private
git trees, in their mail clients or in their heads.

I try to send patches for things that break either on the first
day they are broken so mine comes first, or I wait a while to see
if a fix ends up in linux-next to give everyone else a chance to
get their patch into next so I can catch it on a rebase.

	Arnd

[PATCH 3/6] serial: mid8250: select CONFIG_RATIONAL

[Arnd Bergmann]

On Monday 16 November 2015 18:56:02 Andy Shevchenko wrote:
> On Mon, 2015-11-16 at 16:48 +0100, Arnd Bergmann wrote:
> > The Intel MID support got split out from the PCI 8250 driver,
> > and that now causes a build error when no other driver selects
> > CONFIG_RATIONAL:
> 
> Already published.
> https://lkml.org/lkml/2015/11/12/272
> 
> It's not first time you send patches that already have been published.
> 
> I think you use some testing automation which doesn't take into
> consideration what is sent in mailing lists.

Correct, it also ignores whatever patches other people have in private
git trees, in their mail clients or in their heads.

I try to send patches for things that break either on the first
day they are broken so mine comes first, or I wait a while to see
if a fix ends up in linux-next to give everyone else a chance to
get their patch into next so I can catch it on a rebase.

	Arnd

Re: [PATCH 2/6] serial: fsl-lpuart: move SERIAL_EARLYCON dependency to console

[Stefan Agner]

FWIW,

Acked-by: Stefan Agner <stefan@agner.ch>

On 2015-11-16 07:48, Arnd Bergmann wrote:
> The newly added earlycon support for lpuart adds a
> 'select SERIAL_EARLYCON' statement for the tty driver, but that
> only uses earlycon when console support is present, and otherwise
> results in a pointless build error:
> 
> drivers/built-in.o: In function `setup_earlycon':
> :(.init.text+0x2c4c): undefined reference to `uart_parse_earlycon'
> 
> This changes the Kconfig statement to only select the earlycon
> code if the console is also enabled, like all the other drivers
> do already.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Fixes: 1d59b382f1c4 ("serial: fsl_lpuart: add earlycon support")
> Cc: Stefan Agner <stefan@agner.ch>
> ---
>  drivers/tty/serial/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 1aec4404062d..dbb8ac6afd40 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -1539,13 +1539,13 @@ config SERIAL_FSL_LPUART
>  	tristate "Freescale lpuart serial port support"
>  	depends on HAS_DMA
>  	select SERIAL_CORE
> -	select SERIAL_EARLYCON
>  	help
>  	  Support for the on-chip lpuart on some Freescale SOCs.
>  
>  config SERIAL_FSL_LPUART_CONSOLE
>  	bool "Console on Freescale lpuart serial port"
>  	depends on SERIAL_FSL_LPUART=y
> +	select SERIAL_EARLYCON
>  	select SERIAL_CORE_CONSOLE
>  	help
>  	  If you have enabled the lpuart serial port on the Freescale SoCs,

[PATCH 2/6] serial: fsl-lpuart: move SERIAL_EARLYCON dependency to console

[Stefan Agner]

FWIW,

Acked-by: Stefan Agner <stefan@agner.ch>

On 2015-11-16 07:48, Arnd Bergmann wrote:
> The newly added earlycon support for lpuart adds a
> 'select SERIAL_EARLYCON' statement for the tty driver, but that
> only uses earlycon when console support is present, and otherwise
> results in a pointless build error:
> 
> drivers/built-in.o: In function `setup_earlycon':
> :(.init.text+0x2c4c): undefined reference to `uart_parse_earlycon'
> 
> This changes the Kconfig statement to only select the earlycon
> code if the console is also enabled, like all the other drivers
> do already.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Fixes: 1d59b382f1c4 ("serial: fsl_lpuart: add earlycon support")
> Cc: Stefan Agner <stefan@agner.ch>
> ---
>  drivers/tty/serial/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 1aec4404062d..dbb8ac6afd40 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -1539,13 +1539,13 @@ config SERIAL_FSL_LPUART
>  	tristate "Freescale lpuart serial port support"
>  	depends on HAS_DMA
>  	select SERIAL_CORE
> -	select SERIAL_EARLYCON
>  	help
>  	  Support for the on-chip lpuart on some Freescale SOCs.
>  
>  config SERIAL_FSL_LPUART_CONSOLE
>  	bool "Console on Freescale lpuart serial port"
>  	depends on SERIAL_FSL_LPUART=y
> +	select SERIAL_EARLYCON
>  	select SERIAL_CORE_CONSOLE
>  	help
>  	  If you have enabled the lpuart serial port on the Freescale SoCs,