From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfram Sang Date: Thu, 19 Nov 2015 15:56:41 +0000 Subject: [PATCH v3 01/11] i2c: rcar: make sure clocks are on when doing clock calculation Message-Id: <1447948611-2615-2-git-send-email-wsa@the-dreams.de> List-Id: References: <1447948611-2615-1-git-send-email-wsa@the-dreams.de> In-Reply-To: <1447948611-2615-1-git-send-email-wsa@the-dreams.de> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-i2c@vger.kernel.org Cc: linux-sh@vger.kernel.org, Magnus Damm , Simon Horman , Laurent Pinchart , Geert Uytterhoeven , Wolfram Sang , Kuninori Morimoto , Yoshihiro Shimoda , Kuninori Morimoto From: Wolfram Sang When calculating the bus speed, the clock should be on, of course. Most bootloaders left them on, so this went unnoticed so far. Move the ioremapping out of this clock-enabled-block and prepare for adding hw initialization there, too. Reported-by: Kuninori Morimoto Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-rcar.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index b0ae560b38c308..dac0f5d1945341 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -650,19 +650,23 @@ static int rcar_i2c_probe(struct platform_device *pdev) return PTR_ERR(priv->clk); } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->io = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->io)) + return PTR_ERR(priv->io); + bus_speed = 100000; /* default 100 kHz */ of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed); priv->devtype = (enum rcar_i2c_type)of_match_device(rcar_i2c_dt_ids, dev)->data; + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); ret = rcar_i2c_clock_calculate(priv, bus_speed, dev); if (ret < 0) - return ret; + goto out_pm_put; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->io = devm_ioremap_resource(dev, res); - if (IS_ERR(priv->io)) - return PTR_ERR(priv->io); + pm_runtime_put(dev); irq = platform_get_irq(pdev, 0); init_waitqueue_head(&priv->wait); @@ -682,22 +686,26 @@ static int rcar_i2c_probe(struct platform_device *pdev) dev_name(dev), priv); if (ret < 0) { dev_err(dev, "cannot get irq %d\n", irq); - return ret; + goto out_pm_disable; } - pm_runtime_enable(dev); platform_set_drvdata(pdev, priv); ret = i2c_add_numbered_adapter(adap); if (ret < 0) { dev_err(dev, "reg adap failed: %d\n", ret); - pm_runtime_disable(dev); - return ret; + goto out_pm_disable; } dev_info(dev, "probed\n"); return 0; + + out_pm_put: + pm_runtime_put(dev); + out_pm_disable: + pm_runtime_disable(dev); + return ret; } static int rcar_i2c_remove(struct platform_device *pdev) -- 2.1.4 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfram Sang Subject: [PATCH v3 01/11] i2c: rcar: make sure clocks are on when doing clock calculation Date: Thu, 19 Nov 2015 16:56:41 +0100 Message-ID: <1447948611-2615-2-git-send-email-wsa@the-dreams.de> References: <1447948611-2615-1-git-send-email-wsa@the-dreams.de> Return-path: Received: from sauhun.de ([89.238.76.85]:36901 "EHLO pokefinder.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934103AbbKSP44 (ORCPT ); Thu, 19 Nov 2015 10:56:56 -0500 In-Reply-To: <1447948611-2615-1-git-send-email-wsa@the-dreams.de> Sender: linux-i2c-owner@vger.kernel.org List-Id: linux-i2c@vger.kernel.org To: linux-i2c@vger.kernel.org Cc: linux-sh@vger.kernel.org, Magnus Damm , Simon Horman , Laurent Pinchart , Geert Uytterhoeven , Wolfram Sang , Kuninori Morimoto , Yoshihiro Shimoda , Kuninori Morimoto From: Wolfram Sang When calculating the bus speed, the clock should be on, of course. Most bootloaders left them on, so this went unnoticed so far. Move the ioremapping out of this clock-enabled-block and prepare for adding hw initialization there, too. Reported-by: Kuninori Morimoto Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-rcar.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index b0ae560b38c308..dac0f5d1945341 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -650,19 +650,23 @@ static int rcar_i2c_probe(struct platform_device *pdev) return PTR_ERR(priv->clk); } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->io = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->io)) + return PTR_ERR(priv->io); + bus_speed = 100000; /* default 100 kHz */ of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed); priv->devtype = (enum rcar_i2c_type)of_match_device(rcar_i2c_dt_ids, dev)->data; + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); ret = rcar_i2c_clock_calculate(priv, bus_speed, dev); if (ret < 0) - return ret; + goto out_pm_put; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->io = devm_ioremap_resource(dev, res); - if (IS_ERR(priv->io)) - return PTR_ERR(priv->io); + pm_runtime_put(dev); irq = platform_get_irq(pdev, 0); init_waitqueue_head(&priv->wait); @@ -682,22 +686,26 @@ static int rcar_i2c_probe(struct platform_device *pdev) dev_name(dev), priv); if (ret < 0) { dev_err(dev, "cannot get irq %d\n", irq); - return ret; + goto out_pm_disable; } - pm_runtime_enable(dev); platform_set_drvdata(pdev, priv); ret = i2c_add_numbered_adapter(adap); if (ret < 0) { dev_err(dev, "reg adap failed: %d\n", ret); - pm_runtime_disable(dev); - return ret; + goto out_pm_disable; } dev_info(dev, "probed\n"); return 0; + + out_pm_put: + pm_runtime_put(dev); + out_pm_disable: + pm_runtime_disable(dev); + return ret; } static int rcar_i2c_remove(struct platform_device *pdev) -- 2.1.4