From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Chou Date: Sun, 6 Dec 2015 21:19:56 +0800 Subject: [U-Boot] [PATCH] net: eth_designware: select PHYLIB in Kconfig Message-ID: <1449407996-4062-1-git-send-email-thomas@wytron.com.tw> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Select PHYLIB in drivers/net/Kconfig. And remove CONFIG_PHYLIB from legacy board header files. This fixed the warnings when both ALTERA_TSE and ETH_DESIGNWARE are selected. Reported-by: Pavel Machek Signed-off-by: Thomas Chou --- drivers/net/Kconfig | 1 + include/configs/axs101.h | 1 - include/configs/bf609-ezkit.h | 1 - include/configs/galileo.h | 1 - include/configs/socfpga_common.h | 1 - include/configs/spear-common.h | 1 - include/configs/stv0991.h | 1 - include/configs/sunxi-common.h | 1 - include/configs/tb100.h | 1 - include/configs/x600.h | 1 - 10 files changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index a03a95d..4b04d09 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -88,6 +88,7 @@ config ETH_SANDBOX_RAW config ETH_DESIGNWARE bool "Synopsys Designware Ethernet MAC" + select PHYLIB help This MAC is present in SoCs from various vendors. It supports 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to diff --git a/include/configs/axs101.h b/include/configs/axs101.h index 650d97d..eeb2ae6 100644 --- a/include/configs/axs101.h +++ b/include/configs/axs101.h @@ -95,7 +95,6 @@ /* * Ethernet PHY configuration */ -#define CONFIG_PHYLIB #define CONFIG_MII #define CONFIG_PHY_GIGE diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 0e353b9..b5d4847 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -75,7 +75,6 @@ #define CONFIG_DW_ALTDESCRIPTOR #define CONFIG_CMD_MII #define CONFIG_MII -#define CONFIG_PHYLIB /* i2c Settings */ #define CONFIG_SYS_I2C diff --git a/include/configs/galileo.h b/include/configs/galileo.h index eb16a5e..14a42b1 100644 --- a/include/configs/galileo.h +++ b/include/configs/galileo.h @@ -45,7 +45,6 @@ /* 10/100M Ethernet support */ #define CONFIG_DESIGNWARE_ETH #define CONFIG_DW_ALTDESCRIPTOR -#define CONFIG_PHYLIB /* Environment configuration */ #define CONFIG_ENV_SECT_SIZE 0x1000 diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index b3f65b6..86eccba 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -105,7 +105,6 @@ #define CONFIG_DW_ALTDESCRIPTOR #define CONFIG_MII #define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ) -#define CONFIG_PHYLIB #define CONFIG_PHY_GIGE #endif diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index 1d69477..d2630f4 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -17,7 +17,6 @@ /* Ethernet driver configuration */ #define CONFIG_MII -#define CONFIG_PHYLIB #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index 14c6a9e..f421321 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -53,7 +53,6 @@ /* GMAC related configs */ #define CONFIG_MII -#define CONFIG_PHYLIB #define CONFIG_DW_ALTDESCRIPTOR #define CONFIG_PHY_MICREL diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 98a2c74..31a68ac 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -312,7 +312,6 @@ extern int soft_i2c_gpio_scl; #define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ #define CONFIG_PHY_ADDR 1 #define CONFIG_MII /* MII PHY management */ -#define CONFIG_PHYLIB #endif #ifdef CONFIG_USB_EHCI_HCD diff --git a/include/configs/tb100.h b/include/configs/tb100.h index 8660ed4..e06484f 100644 --- a/include/configs/tb100.h +++ b/include/configs/tb100.h @@ -42,7 +42,6 @@ /* * Ethernet PHY configuration */ -#define CONFIG_PHYLIB #define CONFIG_PHY_GIGE /* diff --git a/include/configs/x600.h b/include/configs/x600.h index 58f1aca..0263c50 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -77,7 +77,6 @@ /* Ethernet config options */ #define CONFIG_MII -#define CONFIG_PHYLIB #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ -- 2.5.0