All of lore.kernel.org
 help / color / mirror / Atom feed
From: Himanshu Madhani <himanshu.madhani@qlogic.com>
To: target-devel@vger.kernel.org, nab@linux-iscsi.org
Cc: giridhar.malavali@qlogic.com, linux-scsi@vger.kernel.org,
	himanshu.madhani@qlogic.com
Subject: [PATCH 01/20] qla2xxx: Enable Extended Login support
Date: Mon, 7 Dec 2015 19:48:48 -0500	[thread overview]
Message-ID: <1449535747-2850-2-git-send-email-himanshu.madhani@qlogic.com> (raw)
In-Reply-To: <1449535747-2850-1-git-send-email-himanshu.madhani@qlogic.com>

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
---
 drivers/scsi/qla2xxx/qla_dbg.c  |    9 +--
 drivers/scsi/qla2xxx/qla_def.h  |   13 ++++-
 drivers/scsi/qla2xxx/qla_gbl.h  |    7 ++
 drivers/scsi/qla2xxx/qla_init.c |    7 ++
 drivers/scsi/qla2xxx/qla_mbx.c  |  119 +++++++++++++++++++++++++++++++++++++++
 drivers/scsi/qla2xxx/qla_os.c   |   76 +++++++++++++++++++++++++
 6 files changed, 224 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 34dc9a3..5766640 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -14,7 +14,7 @@
  * | Module Init and Probe        |       0x017f       | 0x0146         |
  * |                              |                    | 0x015b-0x0160	|
  * |                              |                    | 0x016e-0x0170  |
- * | Mailbox commands             |       0x118d       | 0x1115-0x1116	|
+ * | Mailbox commands             |       0x1192       | 0x1018-0x1019	|
  * |                              |                    | 0x111a-0x111b  |
  * | Device Discovery             |       0x2016       | 0x2020-0x2022, |
  * |                              |                    | 0x2011-0x2012, |
@@ -60,10 +60,9 @@
  * |                              |                    | 0xb13c-0xb140  |
  * |                              |                    | 0xb149		|
  * | MultiQ                       |       0xc00c       |		|
- * | Misc                         |       0xd300       | 0xd016-0xd017	|
- * |                              |                    | 0xd021,0xd024	|
- * |                              |                    | 0xd025,0xd029	|
- * |                              |                    | 0xd02a,0xd02e	|
+ * | Misc                         |       0xd300       | 0xd012-0xd014	|
+ * |                              |                    | 0xd016-0xd017	|
+ * |                              |                    | 0xd02e		|
  * |                              |                    | 0xd031-0xd0ff	|
  * |                              |                    | 0xd101-0xd1fe	|
  * |                              |                    | 0xd214-0xd2fe	|
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 388d790..8f465b7 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -891,6 +891,7 @@ struct mbx_cmd_32 {
 #define MBC_DISABLE_VI			0x24	/* Disable VI operation. */
 #define MBC_ENABLE_VI			0x25	/* Enable VI operation. */
 #define MBC_GET_FIRMWARE_OPTION		0x28	/* Get Firmware Options. */
+#define MBC_GET_MEM_OFFLOAD_CNTRL_STAT	0x34	/* Memory Offload ctrl/Stat*/
 #define MBC_SET_FIRMWARE_OPTION		0x38	/* Set Firmware Options. */
 #define MBC_LOOP_PORT_BYPASS		0x40	/* Loop Port Bypass. */
 #define MBC_LOOP_PORT_ENABLE		0x41	/* Loop Port Enable. */
@@ -2962,11 +2963,12 @@ struct qla_hw_data {
 		uint32_t	isp82xx_no_md_cap:1;
 		uint32_t	host_shutting_down:1;
 		uint32_t	idc_compl_status:1;
-
 		uint32_t        mr_reset_hdlr_active:1;
 		uint32_t        mr_intr_valid:1;
+
 		uint32_t	fawwpn_enabled:1;
-		/* 35 bits */
+		uint32_t	exlogins_enabled:1;
+		/* 34 bits */
 	} flags;
 
 	/* This spinlock is used to protect "io transactions", you must
@@ -3237,6 +3239,13 @@ struct qla_hw_data {
 	void		*async_pd;
 	dma_addr_t	async_pd_dma;
 
+#define ENABLE_EXTENDED_LOGIN	BIT_7
+
+	/* Extended Logins  */
+	void		*exlogin_buf;
+	dma_addr_t	exlogin_buf_dma;
+	int		exlogin_size;
+
 	void		*swl;
 
 	/* These are used by mailbox operations. */
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 7686bfe..d396c49 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -117,6 +117,7 @@ extern int ql2xdontresethba;
 extern uint64_t ql2xmaxlun;
 extern int ql2xmdcapmask;
 extern int ql2xmdenable;
+extern int ql2xexlogins;
 
 extern int qla2x00_loop_reset(scsi_qla_host_t *);
 extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -135,6 +136,8 @@ extern int qla2x00_post_async_adisc_work(struct scsi_qla_host *, fc_port_t *,
     uint16_t *);
 extern int qla2x00_post_async_adisc_done_work(struct scsi_qla_host *,
     fc_port_t *, uint16_t *);
+extern int qla2x00_set_exlogins_buffer(struct scsi_qla_host *);
+extern void qla2x00_free_exlogin_buffer(struct qla_hw_data *);
 
 extern int qla81xx_restart_mpi_firmware(scsi_qla_host_t *);
 
@@ -766,4 +769,8 @@ extern int qla8044_abort_isp(scsi_qla_host_t *);
 extern int qla8044_check_fw_alive(struct scsi_qla_host *);
 
 extern void qlt_host_reset_handler(struct qla_hw_data *ha);
+extern int qla_get_exlogin_status(scsi_qla_host_t *, uint16_t *,
+	uint16_t *);
+extern int qla_set_exlogin_mem_cfg(scsi_qla_host_t *vha, dma_addr_t phys_addr);
+
 #endif /* _QLA_GBL_H */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 16a1935c..ef61a24 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1843,9 +1843,16 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 			ql_dbg(ql_dbg_init, vha, 0x00ca,
 			    "Starting firmware.\n");
 
+			if (ql2xexlogins)
+				ha->flags.exlogins_enabled = 1;
+
 			rval = qla2x00_execute_fw(vha, srisc_address);
 			/* Retrieve firmware information. */
 			if (rval == QLA_SUCCESS) {
+				rval = qla2x00_set_exlogins_buffer(vha);
+				if (rval != QLA_SUCCESS)
+					goto failed;
+
 enable_82xx_npiv:
 				fw_major_version = ha->fw_major_version;
 				if (IS_P3P_TYPE(ha))
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index cb11e04..a0ae178 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -489,6 +489,10 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
 			    EXTENDED_BB_CREDITS);
 		} else
 			mcp->mb[4] = 0;
+
+		if (ha->flags.exlogins_enabled)
+			mcp->mb[4] |= ENABLE_EXTENDED_LOGIN;
+
 		mcp->out_mb |= MBX_4|MBX_3|MBX_2|MBX_1;
 		mcp->in_mb |= MBX_1;
 	} else {
@@ -521,6 +525,117 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
 }
 
 /*
+ * qla_get_exlogin_status
+ *	Get extended login status
+ *	uses the memory offload control/status Mailbox
+ *
+ * Input:
+ *	ha:		adapter state pointer.
+ *	fwopt:		firmware options
+ *
+ * Returns:
+ *	qla2x00 local function status
+ *
+ * Context:
+ *	Kernel context.
+ */
+#define	FETCH_XLOGINS_STAT	0x8
+int
+qla_get_exlogin_status(scsi_qla_host_t *vha, uint16_t *buf_sz,
+	uint16_t *ex_logins_cnt)
+{
+	int rval;
+	mbx_cmd_t	mc;
+	mbx_cmd_t	*mcp = &mc;
+
+	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x118f,
+	    "Entered %s\n", __func__);
+
+	memset(mcp->mb, 0 , sizeof(mcp->mb));
+	mcp->mb[0] = MBC_GET_MEM_OFFLOAD_CNTRL_STAT;
+	mcp->mb[1] = FETCH_XLOGINS_STAT;
+	mcp->out_mb = MBX_1|MBX_0;
+	mcp->in_mb = MBX_10|MBX_4|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+
+	rval = qla2x00_mailbox_command(vha, mcp);
+	if (rval != QLA_SUCCESS) {
+		ql_dbg(ql_dbg_mbx, vha, 0x1115, "Failed=%x.\n", rval);
+	} else {
+		*buf_sz = mcp->mb[4];
+		*ex_logins_cnt = mcp->mb[10];
+
+		ql_log(ql_log_info, vha, 0x1190,
+		    "buffer size 0x%x, exchange login count=%d\n",
+		    mcp->mb[4], mcp->mb[10]);
+
+		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1116,
+		    "Done %s.\n", __func__);
+	}
+
+	return rval;
+}
+
+/*
+ * qla_set_exlogin_mem_cfg
+ *	set extended login memory configuration
+ *	Mbx needs to be issues before init_cb is set
+ *
+ * Input:
+ *	ha:		adapter state pointer.
+ *	buffer:		buffer pointer
+ *	phys_addr:	physical address of buffer
+ *	size:		size of buffer
+ *	TARGET_QUEUE_LOCK must be released
+ *	ADAPTER_STATE_LOCK must be release
+ *
+ * Returns:
+ *	qla2x00 local funxtion status code.
+ *
+ * Context:
+ *	Kernel context.
+ */
+#define CONFIG_XLOGINS_MEM	0x3
+int
+qla_set_exlogin_mem_cfg(scsi_qla_host_t *vha, dma_addr_t phys_addr)
+{
+	int		rval;
+	mbx_cmd_t	mc;
+	mbx_cmd_t	*mcp = &mc;
+	struct qla_hw_data *ha = vha->hw;
+	int configured_count;
+
+	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x111a,
+	    "Entered %s.\n", __func__);
+
+	memset(mcp->mb, 0 , sizeof(mcp->mb));
+	mcp->mb[0] = MBC_GET_MEM_OFFLOAD_CNTRL_STAT;
+	mcp->mb[1] = CONFIG_XLOGINS_MEM;
+	mcp->mb[2] = MSW(phys_addr);
+	mcp->mb[3] = LSW(phys_addr);
+	mcp->mb[6] = MSW(MSD(phys_addr));
+	mcp->mb[7] = LSW(MSD(phys_addr));
+	mcp->mb[8] = MSW(ha->exlogin_size);
+	mcp->mb[9] = LSW(ha->exlogin_size);
+	mcp->out_mb = MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_11|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+	if (rval != QLA_SUCCESS) {
+		/*EMPTY*/
+		ql_dbg(ql_dbg_mbx, vha, 0x111b, "Failed=%x.\n", rval);
+	} else {
+		configured_count = mcp->mb[11];
+		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x118c,
+		    "Done %s.\n", __func__);
+	}
+
+	return rval;
+}
+
+/*
  * qla2x00_get_fw_version
  *	Get firmware version.
  *
@@ -594,6 +709,10 @@ qla2x00_get_fw_version(scsi_qla_host_t *vha)
 		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x112f,
 		    "%s: Ext_FwAttributes Upper: 0x%x, Lower: 0x%x.\n",
 		    __func__, mcp->mb[17], mcp->mb[16]);
+		if (ha->fw_attributes_h & 0x4)
+			ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x118d,
+			    "%s: Firmware supports Extended Login 0x%x\n",
+			    __func__, ha->fw_attributes_h);
 	}
 
 	if (IS_QLA27XX(ha)) {
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 6be32fd..bfe33d5 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -221,6 +221,12 @@ MODULE_PARM_DESC(ql2xmdenable,
 		"0 - MiniDump disabled. "
 		"1 (Default) - MiniDump enabled.");
 
+int ql2xexlogins = 0;
+module_param(ql2xexlogins, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(ql2xexlogins,
+		 "Number of extended Logins. "
+		 "0 (Default)- Disabled.");
+
 /*
  * SCSI host template entry points
  */
@@ -3128,6 +3134,10 @@ qla2x00_remove_one(struct pci_dev *pdev)
 
 	base_vha->flags.online = 0;
 
+	/* free DMA memory */
+	if (ha->exlogin_buf)
+		qla2x00_free_exlogin_buffer(ha);
+
 	qla2x00_destroy_deferred_work(ha);
 
 	qlt_remove_target(ha, base_vha);
@@ -3587,6 +3597,72 @@ fail:
 	return -ENOMEM;
 }
 
+int
+qla2x00_set_exlogins_buffer(scsi_qla_host_t *vha)
+{
+	int rval;
+	uint16_t	size, max_cnt, temp;
+	struct qla_hw_data *ha = vha->hw;
+
+	/* Return if we don't need to alloacate any extended logins */
+	if (!ql2xexlogins)
+		return QLA_SUCCESS;
+
+	ql_log(ql_log_info, vha, 0xd021, "EXLOGIN count: %d.\n", ql2xexlogins);
+	max_cnt = 0;
+	rval = qla_get_exlogin_status(vha, &size, &max_cnt);
+	if (rval != QLA_SUCCESS) {
+		ql_log_pci(ql_log_fatal, ha->pdev, 0xd029,
+		    "Failed to get exlogin status.\n");
+		return rval;
+	}
+
+	temp = (ql2xexlogins > max_cnt) ? max_cnt : ql2xexlogins;
+	ha->exlogin_size = (size * temp);
+	ql_log(ql_log_info, vha, 0xd024,
+		"EXLOGIN: max_logins=%d, portdb=0x%x, total=%d.\n",
+		max_cnt, size, temp);
+
+	ql_log(ql_log_info, vha, 0xd025, "EXLOGIN: requested size=0x%x\n",
+		ha->exlogin_size);
+
+	/* Get consistent memory for extended logins */
+	ha->exlogin_buf = dma_alloc_coherent(&ha->pdev->dev,
+	    ha->exlogin_size, &ha->exlogin_buf_dma, GFP_KERNEL);
+	if (!ha->exlogin_buf) {
+		ql_log_pci(ql_log_fatal, ha->pdev, 0xd02a,
+		    "Failed to allocate memory for exlogin_buf_dma.\n");
+		return -ENOMEM;
+	}
+
+	/* Now configure the dma buffer */
+	rval = qla_set_exlogin_mem_cfg(vha, ha->exlogin_buf_dma);
+	if (rval) {
+		ql_log(ql_log_fatal, vha, 0x00cf,
+		    "Setup extended login buffer  ****FAILED****.\n");
+		qla2x00_free_exlogin_buffer(ha);
+	}
+
+	return rval;
+}
+
+/*
+* qla2x00_free_exlogin_buffer
+*
+* Input:
+*	ha = adapter block pointer
+*/
+void
+qla2x00_free_exlogin_buffer(struct qla_hw_data *ha)
+{
+	if (ha->exlogin_buf) {
+		dma_free_coherent(&ha->pdev->dev, ha->exlogin_size,
+		    ha->exlogin_buf, ha->exlogin_buf_dma);
+		ha->exlogin_buf = NULL;
+		ha->exlogin_size = 0;
+	}
+}
+
 /*
 * qla2x00_free_fw_dump
 *	Frees fw dump stuff.
-- 
1.7.7


  reply	other threads:[~2015-12-08  1:29 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-08  0:48 [PATCH 00/20] qla2xxx: Patches for target-pending branch Himanshu Madhani
2015-12-08  0:48 ` Himanshu Madhani [this message]
2015-12-08 15:51   ` [PATCH 01/20] qla2xxx: Enable Extended Login support Hannes Reinecke
2015-12-08 19:35     ` Himanshu Madhani
2015-12-08  0:48 ` [PATCH 02/20] qla2xxx: Enable Exchange offload support Himanshu Madhani
2015-12-08 15:52   ` Hannes Reinecke
2015-12-08  0:48 ` [PATCH 03/20] qla2xxx: Enable Target counters in DebugFS Himanshu Madhani
2015-12-08 15:52   ` Hannes Reinecke
2015-12-08  0:48 ` [PATCH 04/20] qla2xxx: Add FW resource count " Himanshu Madhani
2015-12-08 15:53   ` Hannes Reinecke
2015-12-08  0:48 ` [PATCH 05/20] qla2xxx: Added interface to send ELS commands from driver Himanshu Madhani
2015-12-08  2:10   ` kbuild test robot
2015-12-08  2:10   ` [PATCH] qla2xxx: fix ifnullfree.cocci warnings kbuild test robot
2015-12-08 15:54   ` [PATCH 05/20] qla2xxx: Added interface to send ELS commands from driver Hannes Reinecke
2015-12-08  0:48 ` [PATCH 06/20] qla2xxx: Delete session if initiator is gone from FW Himanshu Madhani
2015-12-08  1:41   ` kbuild test robot
2015-12-08 15:58   ` Hannes Reinecke
2015-12-08  0:48 ` [PATCH 07/20] qla2xxx: Wait for all conflicts before ack'ing PLOGI Himanshu Madhani
2015-12-08 16:00   ` Hannes Reinecke
2015-12-08  0:48 ` [PATCH 08/20] qla2xxx: Replace QLA_TGT_STATE_ABORTED with a bit Himanshu Madhani
2015-12-08 16:01   ` Hannes Reinecke
2015-12-08  0:48 ` [PATCH 09/20] qla2xxx: Change check_stop_free to always return 1 Himanshu Madhani
2015-12-08  2:33   ` Christoph Hellwig
2015-12-09  6:56   ` Hannes Reinecke
2015-12-10  1:06     ` Quinn Tran
2015-12-08  0:48 ` [PATCH 10/20] qla2xxx: Fix interaction issue between qla2xxx and Target Core Module Himanshu Madhani
2015-12-08  2:37   ` Christoph Hellwig
2015-12-09 22:07     ` Quinn Tran
2015-12-14 10:34       ` Christoph Hellwig
2015-12-14 21:59         ` Quinn Tran
2015-12-09  7:01   ` Hannes Reinecke
2015-12-09 22:41     ` Quinn Tran
2015-12-08  0:48 ` [PATCH 11/20] qla2xxx: Add TAS detection for kernel 3.15 n newer Himanshu Madhani
2015-12-08  2:48   ` Christoph Hellwig
2015-12-09 20:24     ` Quinn Tran
2015-12-14 10:37       ` Christoph Hellwig
2015-12-14 22:00         ` Quinn Tran
2015-12-09  7:02   ` Hannes Reinecke
2015-12-08  0:48 ` [PATCH 12/20] target/tmr: LUN reset cause cmd premature free Himanshu Madhani
2015-12-08  2:48   ` Christoph Hellwig
2015-12-09 20:11     ` Quinn Tran
2016-01-04  7:44     ` Bart Van Assche
2015-12-09  7:03   ` Hannes Reinecke
2015-12-08  0:49 ` [PATCH 13/20] qla2xxx: Remove dependency on hardware_lock to reduce lock contention Himanshu Madhani
2015-12-08  0:49 ` [PATCH 14/20] qla2xxx: Add irq affinity notification Himanshu Madhani
2015-12-08  0:49 ` [PATCH 15/20] qla2xxx: Add selective command queuing Himanshu Madhani
2015-12-08  0:49 ` [PATCH 16/20] qla2xxx: Move atioq to a different lock to reduce lock contention Himanshu Madhani
2015-12-08  0:49 ` [PATCH 17/20] qla2xxx: Disable ZIO at start time Himanshu Madhani
2015-12-08  0:49 ` [PATCH 18/20] qla2xxx: Set all queues to 4k Himanshu Madhani
2015-12-08  0:49 ` [PATCH 19/20] qla2xxx: Add bulk send for atio & ctio completion paths Himanshu Madhani
2015-12-08  0:49 ` [PATCH 20/20] qla2xxx: Check for online flag instead of active reset when transmitting responses Himanshu Madhani

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1449535747-2850-2-git-send-email-himanshu.madhani@qlogic.com \
    --to=himanshu.madhani@qlogic.com \
    --cc=giridhar.malavali@qlogic.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=nab@linux-iscsi.org \
    --cc=target-devel@vger.kernel.org \
    --subject='Re: [PATCH 01/20] qla2xxx: Enable Extended Login support' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.