All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Janusz Wolak <januszvdm@gmail.com>,
	netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
	jogreene@redhat.com, Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 05/17] e1000: Remove checkpatch coding style errors
Date: Sun, 13 Dec 2015 00:31:18 -0800	[thread overview]
Message-ID: <1449995490-17020-6-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1449995490-17020-1-git-send-email-jeffrey.t.kirsher@intel.com>

From: Janusz Wolak <januszvdm@gmail.com>

Signed-off-by: Janusz Wolak <januszvdm@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000/e1000_hw.c   |  16 ++--
 drivers/net/ethernet/intel/e1000/e1000_main.c | 116 +++++++++++++++-----------
 2 files changed, 72 insertions(+), 60 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index 2523e30..59d1769 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -683,7 +683,7 @@ static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
 	}
 
 	ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1,
-	                            &eeprom_data);
+				    &eeprom_data);
 	if (ret_val) {
 		return ret_val;
 	}
@@ -1652,7 +1652,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 		mii_1000t_ctrl_reg = 0;
 	} else {
 		ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL,
-		                              mii_1000t_ctrl_reg);
+					      mii_1000t_ctrl_reg);
 		if (ret_val)
 			return ret_val;
 	}
@@ -2193,8 +2193,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
 			else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
 				 (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
 				 (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
-				 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
-			{
+				 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
 				hw->fc = E1000_FC_TX_PAUSE;
 				e_dbg
 				    ("Flow Control = TX PAUSE frames only.\n");
@@ -2210,8 +2209,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
 			else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
 				 (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
 				 !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
-				 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
-			{
+				 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
 				hw->fc = E1000_FC_RX_PAUSE;
 				e_dbg
 				    ("Flow Control = RX PAUSE frames only.\n");
@@ -3449,7 +3447,7 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
 	if (hw->phy_type == e1000_phy_igp)
 		return e1000_phy_igp_get_info(hw, phy_info);
 	else if ((hw->phy_type == e1000_phy_8211) ||
-	         (hw->phy_type == e1000_phy_8201))
+		 (hw->phy_type == e1000_phy_8201))
 		return E1000_SUCCESS;
 	else
 		return e1000_phy_m88_get_info(hw, phy_info);
@@ -3896,7 +3894,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
 
 	if (hw->mac_type == e1000_ce4100) {
 		GBE_CONFIG_FLASH_READ(GBE_CONFIG_BASE_VIRT, offset, words,
-		                      data);
+				      data);
 		return E1000_SUCCESS;
 	}
 
@@ -4067,7 +4065,7 @@ static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
 
 	if (hw->mac_type == e1000_ce4100) {
 		GBE_CONFIG_FLASH_WRITE(GBE_CONFIG_BASE_VIRT, offset, words,
-		                       data);
+				       data);
 		return E1000_SUCCESS;
 	}
 
diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 0680235..12d59a4 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -99,13 +99,13 @@ int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
 void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
 void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
 static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
-                             struct e1000_tx_ring *txdr);
+				    struct e1000_tx_ring *txdr);
 static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
-                             struct e1000_rx_ring *rxdr);
+				    struct e1000_rx_ring *rxdr);
 static void e1000_free_tx_resources(struct e1000_adapter *adapter,
-                             struct e1000_tx_ring *tx_ring);
+				    struct e1000_tx_ring *tx_ring);
 static void e1000_free_rx_resources(struct e1000_adapter *adapter,
-                             struct e1000_rx_ring *rx_ring);
+				    struct e1000_rx_ring *rx_ring);
 void e1000_update_stats(struct e1000_adapter *adapter);
 
 static int e1000_init_module(void);
@@ -122,16 +122,16 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter);
 static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
 static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
 static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
-                                struct e1000_tx_ring *tx_ring);
+				struct e1000_tx_ring *tx_ring);
 static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
-                                struct e1000_rx_ring *rx_ring);
+				struct e1000_rx_ring *rx_ring);
 static void e1000_set_rx_mode(struct net_device *netdev);
 static void e1000_update_phy_info_task(struct work_struct *work);
 static void e1000_watchdog(struct work_struct *work);
 static void e1000_82547_tx_fifo_stall_task(struct work_struct *work);
 static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 				    struct net_device *netdev);
-static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
+static struct net_device_stats *e1000_get_stats(struct net_device *netdev);
 static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
 static int e1000_set_mac(struct net_device *netdev, void *p);
 static irqreturn_t e1000_intr(int irq, void *data);
@@ -164,7 +164,7 @@ static void e1000_tx_timeout(struct net_device *dev);
 static void e1000_reset_task(struct work_struct *work);
 static void e1000_smartspeed(struct e1000_adapter *adapter);
 static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
-                                       struct sk_buff *skb);
+				       struct sk_buff *skb);
 
 static bool e1000_vlan_used(struct e1000_adapter *adapter);
 static void e1000_vlan_mode(struct net_device *netdev,
@@ -195,7 +195,7 @@ MODULE_PARM_DESC(copybreak,
 	"Maximum size of packet that is copied to a new buffer on receive");
 
 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
-                     pci_channel_state_t state);
+						pci_channel_state_t state);
 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
 static void e1000_io_resume(struct pci_dev *pdev);
 
@@ -287,7 +287,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter)
 	int err;
 
 	err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
-	                  netdev);
+			  netdev);
 	if (err) {
 		e_err(probe, "Unable to allocate interrupt Error: %d\n", err);
 	}
@@ -636,8 +636,8 @@ void e1000_reset(struct e1000_adapter *adapter)
 		 * but don't include ethernet FCS because hardware appends it
 		 */
 		min_tx_space = (hw->max_frame_size +
-		                sizeof(struct e1000_tx_desc) -
-		                ETH_FCS_LEN) * 2;
+				sizeof(struct e1000_tx_desc) -
+				ETH_FCS_LEN) * 2;
 		min_tx_space = ALIGN(min_tx_space, 1024);
 		min_tx_space >>= 10;
 		/* software strips receive CRC, so leave room for it */
@@ -943,8 +943,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct e1000_adapter *adapter;
 	struct e1000_hw *hw;
 
-	static int cards_found = 0;
-	static int global_quad_port_a = 0; /* global ksp3 port a indication */
+	static int cards_found;
+	static int global_quad_port_a; /* global ksp3 port a indication */
 	int i, err, pci_using_dac;
 	u16 eeprom_data = 0;
 	u16 tmp = 0;
@@ -1046,7 +1046,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (hw->mac_type == e1000_ce4100) {
 		hw->ce4100_gbe_mdio_base_virt =
 					ioremap(pci_resource_start(pdev, BAR_1),
-		                                pci_resource_len(pdev, BAR_1));
+						pci_resource_len(pdev, BAR_1));
 
 		if (!hw->ce4100_gbe_mdio_base_virt)
 			goto err_mdio_ioremap;
@@ -1148,7 +1148,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		break;
 	case e1000_82546:
 	case e1000_82546_rev_3:
-		if (er32(STATUS) & E1000_STATUS_FUNC_1){
+		if (er32(STATUS) & E1000_STATUS_FUNC_1) {
 			e1000_read_eeprom(hw,
 				EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
 			break;
@@ -1334,12 +1334,12 @@ static int e1000_sw_init(struct e1000_adapter *adapter)
 static int e1000_alloc_queues(struct e1000_adapter *adapter)
 {
 	adapter->tx_ring = kcalloc(adapter->num_tx_queues,
-	                           sizeof(struct e1000_tx_ring), GFP_KERNEL);
+				   sizeof(struct e1000_tx_ring), GFP_KERNEL);
 	if (!adapter->tx_ring)
 		return -ENOMEM;
 
 	adapter->rx_ring = kcalloc(adapter->num_rx_queues,
-	                           sizeof(struct e1000_rx_ring), GFP_KERNEL);
+				   sizeof(struct e1000_rx_ring), GFP_KERNEL);
 	if (!adapter->rx_ring) {
 		kfree(adapter->tx_ring);
 		return -ENOMEM;
@@ -1811,20 +1811,20 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 	rctl &= ~E1000_RCTL_SZ_4096;
 	rctl |= E1000_RCTL_BSEX;
 	switch (adapter->rx_buffer_len) {
-		case E1000_RXBUFFER_2048:
-		default:
-			rctl |= E1000_RCTL_SZ_2048;
-			rctl &= ~E1000_RCTL_BSEX;
-			break;
-		case E1000_RXBUFFER_4096:
-			rctl |= E1000_RCTL_SZ_4096;
-			break;
-		case E1000_RXBUFFER_8192:
-			rctl |= E1000_RCTL_SZ_8192;
-			break;
-		case E1000_RXBUFFER_16384:
-			rctl |= E1000_RCTL_SZ_16384;
-			break;
+	case E1000_RXBUFFER_2048:
+	default:
+		rctl |= E1000_RCTL_SZ_2048;
+		rctl &= ~E1000_RCTL_BSEX;
+		break;
+	case E1000_RXBUFFER_4096:
+		rctl |= E1000_RCTL_SZ_4096;
+		break;
+	case E1000_RXBUFFER_8192:
+		rctl |= E1000_RCTL_SZ_8192;
+		break;
+	case E1000_RXBUFFER_16384:
+		rctl |= E1000_RCTL_SZ_16384;
+		break;
 	}
 
 	/* This is useful for sniffing bad packets. */
@@ -1861,12 +1861,12 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 
 	if (adapter->netdev->mtu > ETH_DATA_LEN) {
 		rdlen = adapter->rx_ring[0].count *
-		        sizeof(struct e1000_rx_desc);
+			sizeof(struct e1000_rx_desc);
 		adapter->clean_rx = e1000_clean_jumbo_rx_irq;
 		adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
 	} else {
 		rdlen = adapter->rx_ring[0].count *
-		        sizeof(struct e1000_rx_desc);
+			sizeof(struct e1000_rx_desc);
 		adapter->clean_rx = e1000_clean_rx_irq;
 		adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
 	}
@@ -2761,7 +2761,9 @@ static int e1000_tso(struct e1000_adapter *adapter,
 		buffer_info->time_stamp = jiffies;
 		buffer_info->next_to_watch = i;
 
-		if (++i == tx_ring->count) i = 0;
+		if (++i == tx_ring->count)
+			i = 0;
+
 		tx_ring->next_to_use = i;
 
 		return true;
@@ -2816,7 +2818,9 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter,
 	buffer_info->time_stamp = jiffies;
 	buffer_info->next_to_watch = i;
 
-	if (unlikely(++i == tx_ring->count)) i = 0;
+	if (unlikely(++i == tx_ring->count))
+		i = 0;
+
 	tx_ring->next_to_use = i;
 
 	return true;
@@ -2865,8 +2869,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 		 * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
 		 */
 		if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
-		                (size > 2015) && count == 0))
-		        size = 2015;
+			     (size > 2015) && count == 0))
+			size = 2015;
 
 		/* Workaround for potential 82544 hang in PCI-X.  Avoid
 		 * terminating buffers within evenly-aligned dwords.
@@ -2963,7 +2967,7 @@ dma_error:
 		count--;
 
 	while (count--) {
-		if (i==0)
+		if (i == 0)
 			i += tx_ring->count;
 		i--;
 		buffer_info = &tx_ring->buffer_info[i];
@@ -3013,7 +3017,8 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
 		tx_desc->lower.data =
 			cpu_to_le32(txd_lower | buffer_info->length);
 		tx_desc->upper.data = cpu_to_le32(txd_upper);
-		if (unlikely(++i == tx_ring->count)) i = 0;
+		if (unlikely(++i == tx_ring->count))
+			i = 0;
 	}
 
 	tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
@@ -3101,7 +3106,7 @@ static int e1000_maybe_stop_tx(struct net_device *netdev,
 	return __e1000_maybe_stop_tx(netdev, size);
 }
 
-#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1)
 static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 				    struct net_device *netdev)
 {
@@ -3841,7 +3846,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 	struct e1000_tx_buffer *buffer_info;
 	unsigned int i, eop;
 	unsigned int count = 0;
-	unsigned int total_tx_bytes=0, total_tx_packets=0;
+	unsigned int total_tx_bytes = 0, total_tx_packets = 0;
 	unsigned int bytes_compl = 0, pkts_compl = 0;
 
 	i = tx_ring->next_to_clean;
@@ -3869,7 +3874,8 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 			e1000_unmap_and_free_tx_resource(adapter, buffer_info);
 			tx_desc->upper.data = 0;
 
-			if (unlikely(++i == tx_ring->count)) i = 0;
+			if (unlikely(++i == tx_ring->count))
+				i = 0;
 		}
 
 		eop = tx_ring->buffer_info[i].next_to_watch;
@@ -3957,9 +3963,11 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
 	skb_checksum_none_assert(skb);
 
 	/* 82543 or newer only */
-	if (unlikely(hw->mac_type < e1000_82543)) return;
+	if (unlikely(hw->mac_type < e1000_82543))
+		return;
 	/* Ignore Checksum bit is set */
-	if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
+	if (unlikely(status & E1000_RXD_STAT_IXSM))
+		return;
 	/* TCP/UDP checksum error bit is set */
 	if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
 		/* let the stack verify checksum errors */
@@ -4139,7 +4147,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
 	unsigned int i;
 	int cleaned_count = 0;
 	bool cleaned = false;
-	unsigned int total_rx_bytes=0, total_rx_packets=0;
+	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
 
 	i = rx_ring->next_to_clean;
 	rx_desc = E1000_RX_DESC(*rx_ring, i);
@@ -4156,7 +4164,9 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
 
 		status = rx_desc->status;
 
-		if (++i == rx_ring->count) i = 0;
+		if (++i == rx_ring->count)
+			i = 0;
+
 		next_rxd = E1000_RX_DESC(*rx_ring, i);
 		prefetch(next_rxd);
 
@@ -4359,7 +4369,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 	unsigned int i;
 	int cleaned_count = 0;
 	bool cleaned = false;
-	unsigned int total_rx_bytes=0, total_rx_packets=0;
+	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
 
 	i = rx_ring->next_to_clean;
 	rx_desc = E1000_RX_DESC(*rx_ring, i);
@@ -4398,7 +4408,9 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 			buffer_info->rxbuf.data = NULL;
 		}
 
-		if (++i == rx_ring->count) i = 0;
+		if (++i == rx_ring->count)
+			i = 0;
+
 		next_rxd = E1000_RX_DESC(*rx_ring, i);
 		prefetch(next_rxd);
 
@@ -4686,9 +4698,11 @@ static void e1000_smartspeed(struct e1000_adapter *adapter)
 		 * we assume back-to-back
 		 */
 		e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
-		if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+		if (!(phy_status & SR_1000T_MS_CONFIG_FAULT))
+			return;
 		e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
-		if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+		if (!(phy_status & SR_1000T_MS_CONFIG_FAULT))
+			return;
 		e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
 		if (phy_ctrl & CR_1000T_MS_ENABLE) {
 			phy_ctrl &= ~CR_1000T_MS_ENABLE;
-- 
2.5.0

  parent reply	other threads:[~2015-12-13  8:40 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-13  8:31 [net-next 00/17][pull request] 1GbE Intel Wired LAN Driver Updates 2015-12-12 Jeff Kirsher
2015-12-13  8:31 ` [net-next 01/17] e1000: make eeprom read/write scheduler friendly Jeff Kirsher
2015-12-13  8:31 ` [net-next 02/17] igb: add 88E1543 initialization code Jeff Kirsher
2015-12-13  8:31 ` [net-next 03/17] e1000: fix data race between tx_ring->next_to_clean Jeff Kirsher
2015-12-13  8:31 ` [net-next 04/17] igb: don't unmap NULL hw_addr Jeff Kirsher
2015-12-13  8:31 ` Jeff Kirsher [this message]
2015-12-13  8:31 ` [net-next 06/17] igb: use the correct i210 register for EEMNGCTL Jeff Kirsher
2015-12-13  8:31 ` [net-next 07/17] e1000: clean up the checking logic Jeff Kirsher
2015-12-13  8:31 ` [net-next 08/17] e1000: fix a typo in the comment Jeff Kirsher
2015-12-13  8:31 ` [net-next 09/17] e1000e: clean up the local variable Jeff Kirsher
2015-12-13  8:31 ` [net-next 10/17] e1000: fix kernel-doc argument being missing Jeff Kirsher
2015-12-13  8:31 ` [net-next 11/17] e1000: get rid of duplicate exit path Jeff Kirsher
2015-12-13  8:31 ` [net-next 12/17] e1000: Elementary checkpatch warnings and checks removed Jeff Kirsher
2015-12-13  8:31 ` [net-next 13/17] e1000e: fix division by zero on jumbo MTUs Jeff Kirsher
2015-12-13  8:31 ` [net-next 14/17] e1000e: Increase timeout of polling bit RSPCIPHY Jeff Kirsher
2015-12-13  8:31 ` [net-next 15/17] igb: fix NULL derefs due to skipped SR-IOV enabling Jeff Kirsher
2015-12-13  8:31 ` [net-next 16/17] igb: improve handling of disconnected adapters Jeff Kirsher
2015-12-13  8:31 ` [net-next 17/17] e1000e: initial support for i219-LM (3) Jeff Kirsher
2015-12-13 22:11 ` [net-next 00/17][pull request] 1GbE Intel Wired LAN Driver Updates 2015-12-12 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1449995490-17020-6-git-send-email-jeffrey.t.kirsher@intel.com \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=davem@davemloft.net \
    --cc=januszvdm@gmail.com \
    --cc=jogreene@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=nhorman@redhat.com \
    --cc=sassmann@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.